INSTRUCTION MANUAL
CCD COLOR CAMERA
IK-6550A
Please read this manual thoroughly before use, and keep it handy
for future reference.
Record in space provided below the Model No.and
the Serial No. as found on the label on the bottom
of this unit.
Model. No. IK-6550A
Serial No.
Retain this information for future reference.
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS................................................ 2
1. FEATURES & DESCRIPTION ...................................... 4
2. COMPONENTS ............................................................ 4
3. PART NAMES & FUNCTIONS...................................... 5
4. CAMERA INSTALLATION............................................. 6
5. CONNECTIONS AND OPERATIONS .......................... 7
6. LENS ............................................................................ 9
7. LINE-LOCK PHASE...................................................... 10
8. MENU-DRIVEN SET-UP............................................... 11
9. MENU LIST AND SETTINGS ....................................... 26
10. NOTES ON USE AND INSTALLATION ........................ 27
11. IN CASE OF PROBLEMS ............................................ 27
12. SPECIFICATIONS ........................................................ 28
13. EXTERIOR VIEW ......................................................... 29
Download from Www.Somanuals.com. All Manuals Search And Download.
• The CAUTION label, shown on the left,
is attached on the camera.
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightening flash with arrowhead
WARNING :
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage”within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION :
CONNECT 24V AC UL LISTED CLASS
2 POWER SUPPLY.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
FIELD INSTALLATION MARKING :
THIS INSTALLATION SHOULD BE
MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORMTO
ALL LOCAL CODES.
FCC (USA)-INFORMATION
NOTE : This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
USER-INSTALLER CAUTION : Your authority to operate this FCC verified equipment could
be voided if you make changes or modifications not expressly approved by the party.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. FEATURES & DESCRIPTION
1. 24V AC/12V DC dual-voltage capable extends power choice.
2. Setting and adjustments are made by way of on-screen menu. (Menu Driven Set-Up)
3. Camera has the ability to automatically switch the display to color in daylight or black and
white at night.
4. Camera synchronization mode is selectable between internal and line-lock.
5. The shutter speed is automatically adjusted according to the subject brightness.
6. Back Light Compensation (BLC) adjusts for strong backlight conditions.
7. White balance is automatically adjusted depending on color temperature variations (AWB)
8. Easy back focus adjustment for an easy installation.
9. Built - in 1/3 inch high - resolution CCD.
10. Minimum illumination of 0.2 lux at F1.2. (GAIN : HIGH)
11. S/N ratio of 50dB. (With DNR)
12. Horizontal resolution of 540 TV lines.
2. COMPONENTS
(1) Camera .............................................
(2) Accessories ......................................
1
1
(a) Lens Connector ........................... 1 (E.Y.C-221)
(b) Instruction Manual .......................
(c) Lens Cap .....................................
1
1
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. PART NAMES & FUNCTIONS
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. CAMERA INSTALLATION
Wall
9.5 mm
Installation Example
1/4"-20UNC
112
15
The installation guide is for reference only.
Mounting backet is not included.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5. CONNECTIONS AND OPERATIONS
Notes on connecting
• Power plugs of connected equipment must be disconnected before installations.
• A 75-ohm coaxial cable with connector (3C-2V or 5C-2V) is required for standard
connection.
• For details of wiring and operation of equipment to be connected, refer to their
operation manuals.
• Lens, power supply with cable, connectors and coaxial cable are not supplied with
the camera.
5-1. Basic connection Single system configuration
MONITOR TV
CAMERA
AC 120V
(
) Power cord recommended is twisted pair line
with a minimum wire size of 18 AWG.
*
24V AC UL Listed Class 2 power supply / 12V DC power supply
CAUTION: Never input 24V AC and 12V DC at the same time.
Do not overload power supply
The recommended power supplies for this camera are 6 watt minimum for each 24V
AC UL Listed Class 2 power supply or 12V DC power supply.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2. Line-Lock Control
• Matching the vertical synchronization with the power frequency is called the Line-Lock.
• This function is activated when the SYNC menu is selected to LL.
• When two or more cameras are switched by the video switcher for viewing by a monitor TV, the
vertical sync.phase can be locked with the power frequency, and a stable vertical sync.is obtained
without being disturbed at the time of switching.
MONITOR TV
CAMERA1
CAMERA2
VIDEO SWITCHER
TO 24V AC UL Listed
Class 2 power supply
Note:
• The camera is synchronized to the power frequency of 60 1 Hz covering a normal fluctuation of
the power frequency. However, the camera may not cover a large fluctuation caused from the
power generated by an engine generator, etc.
• It takes about 10 seconds or more until a stable synchronization is obtained after the power is
turned on.This is normal, because several seconds are required to stabilize the camera against
power noise.
• Refer to "7. LINE-LOCK PHASE" for adjustment.
5-3. Operation
1. Mount the lens to the camera.
2. Mount the camera to the camera mount.
Caution: If the lens weight is more than 2.2 lbs (1 kg) mount the lens to the camera mount.
Refer to section 6 for lens types and connection.
3. Connect the cables and support equipment to obtain a picture.
4. Adjust the lens aperture (if applicable).
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6. LENS
Back-Focus Adjusment
Back-Focus is adjusted at the factory to accommodate most standard lenses.
However, at times, slight adjustment to the IK-6550A back-
focus is necessary.
Focus Lock Screw
Loosen the Focus Lock Screw. Achieve a clear image by
rotating the focus ring.
Afterwards, tighten the Focus Lock Screw.
Focus ring
IRIS
This camera supports two types of auto-iris lens: Video-
type and DC (direct drive) types. Connect the auto-iris
connector plug to the IRIS terminal on the side of the
camera. Refer to the chart below for correct wiring and
set up.
Auto-iris lens
4
1
3
Video IRIS
Lens
Direct Drive
IRIS Lens
1. +12V
1. Damp – (y)
2. Damp + (γ)
3. Driver + (wh)
4. Driver – (g)
DC Position
IRIS terminal 2. NC
pin
3. VIDEO
2
4. GND
IRIS Switch
VIDEO position
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7. LINE-LOCK PHASE
If two or more cameras within a system have
different AC line phases are switched by the video
switcher, the picture on the monitor TV will fluctuate
vertically.
Connect 24V AC input lines of all cameras so that
they all share the same phase.
If you still have vertical fluctuation, adjust the
V.PHASE controller.
V. PHASE CONTROLLER
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8. MENU-DRIVEN SET-UP
The setting menus of hierarchy are shown below and with on-screen character displays.
MENU
CAMERA SETUP
D/N MODE
D/N LEVEL
SHUTTER
AUTO
LOW
COLOR
MID
B/W
HIGH
1/100
1/2K
AUTO
1/60
1/250
1/4K
1/500
1/10K
1/1K
1/100K
GAIN
SYNC
OFF
INT
STD
HIGH
LL
BLC
OFF
BLC1
MID
BLC2
HIGH
BLC3
BLC4
SHARPNESS
WB
LOW
AUTO
DNR
INDOOR
LOW
0 ~ 7
OUTDOOR
MID
R:0~63 B:0~63
HIGH
<OPTION>
CHROMA
BACK
BACK
ZONE 1 ~ 8
BACK
PRIVACY ZONE
CAMERA ID
OFF
OFF
ON
CAMERA ID
ID POS
TOP
BOTTOM
BACK
EXIT
CANCEL
DEFAULT
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-1. Setting switches and the functions
On the side panel of the cameras there are three push button switches as shown below:
Switch name
SELECT switch
button
Main function
Setting mode call on/off, setting entry
Setting item selection (down)
Setting item selection (up)
button
SELECT switch
button
button
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 Setting mode call and basics
<CAMERA SETUP>
Press the SELECT switch down about 2 seconds then
menu will appear on the display.
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
Use the
buttons to select <CAMERA SETUP>.
EXIT CANCEL DEFAULT
8-2-1. D/N MODE (DAY/NIGHT MODE)
Selections:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
SYNC
BLC
AUTO
LOW
IRIS
STD
INT
AUTO (default): The camera will sense the brightness
level and switches to color mode or
monochrome mode.
COLOR:
B/W:
Color mode
Monochrome mode
OFF
SHARPNESS MID
Process:
WB
AUTO
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
<OPTION>
BACK
2. Position the cursor ( ) next to D/N MODE and
press the SELECT switch to access menu.
3. Use the
buttons to select AUTO, COLOR or B/W.
4. Press the SELECT switch to accept the selection.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-2. D/N LEVEL (DAY/NIGHT LEVEL)
Selections:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
SYNC
BLC
AUTO
LOW
IRIS
STD
INT
LOW (default): The chroma cut level is set less than
20 to 30 IRE.
MID:
The chroma cut level is set less than
30 to 40 IRE.
The chroma cut level is set less than
40 to 50 IRE.
HIGH:
OFF
SHARPNESS MID
WB
AUTO
Process:
<OPTION>
BACK
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to D/N LEVEL and
press the SELECT switch to access menu.
3. Use the
buttons to select LOW, MID or HIGH.
4. Press the SELECT switch to accept the selection.
Note: The camera will switch to black and white
sooner at the high level than at the low level.
8-2-3. SHUTTER (Exposure time)
Selections:
AUTO(AES)
D/N MODE
D/N LEVEL
SHUTTER
GAIN
SYNC
BLC
AUTO
LOW
IRIS
STD
INT
Exposure time is controlled automatically within a
range of 1/60 sec. to 1/100,000 sec. to obtain an
adequate signal.
1/60,1/100,1/250,1/500,1/1K, 1/2K, 1/4K, 1/10K, 1/
100K (MES).
OFF
SHARPNESS MID
When the rear panel switch is set to VIDEO or DC
the exposure time is fixed 1/60 sec.and shutter mode
turn to IRIS(default).
WB
<OPTION>
BACK
AUTO
Process:
1. Set the Iris slide switch, located on the rear of the
camera, to the AES position.
2. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
3. Position the cursor ( ) next to SHUTTER and press
the SELECT switch to access menu.
4. Use the
buttons to choose the shutter speed
from AUTO through 1/100K.
5. Press the SELECT switch to accept the selection.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-4. GAIN (AGC)
Selections:
OFF:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
AUTO
LOW
IRIS
STD
INT
AGC does not operate.
STD (default): Standard position, max gain = 24dB
HIGH:
High-Sensitivity position, max gain =
30dB
SYNC
BLC
OFF
Process:
SHARPNESS MID
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
WB
<OPTION>
BACK
AUTO
2. Position the cursor ( ) next to GAIN and press the
SELECT switch to access menu.
3. Use the
buttons to select OFF, STD or HIGH.
4. Press the SELECT switch to accept the selection.
Note: When using in low light condition, set this
selection to the HIGH position.
8-2-5. SYNC
Selections:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
SYNC
BLC
AUTO
LOW
IRIS
STD
INT
INT (default): The camera is in the internal SYNC
mode.
LL:
The camera is in the Line-Lock Mode.
Line-Lock phase is set 0 to 300 degree
by adjusting the V phase. Refer to 5.
Connections and Operations.
OFF
SHARPNESS MID
WB
AUTO
Process:
<OPTION>
BACK
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to SYNC and press
the SELECT switch to access menu.
3. Use the
buttons to select INT or LL.
4. Press the SELECT switch to accept the selection.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-6. BLC (BACK LIGHT COMPENSATION)
Selections:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
AUTO
LOW
IRIS
STD
INT
When using the automatic electronic iris with an auto
iris lens, the exposure adjustment is automatically
performed so that the best picture is obtained at the
next monitor zone.
SYNC
The four different BLC zones are displayed below:
BLC
OFF
SHARPNESS MID
Process:
WB
AUTO
<OPTION>
BACK
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to BLC and press the
SELECT switch to access menu.
3. Use the
BLC4 or OFF (default).
4. Press the SELECT switch to accept the selection.
buttons to select BLC1, BLC2, BLC3,
OFF
BLC1
BLC2
BLC3
BLC4
Video monitor
Video monitor
Video monitor
Video monitor
Video monitor
Note: Use this function if there is intense light in the area outside the zone.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-7. SHARPNESS
Selections:
Adjust the outline correction.
LOW:
MID (default): to make the outline standard.
HIGH:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
AUTO
LOW
IRIS
STD
INT
to make the outline softer.
to make the outline clearer
SYNC
BLC
OFF
Process:
SHARPNESS MID
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
WB
<OPTION>
BACK
AUTO
2. Position the cursor ( ) next to SHARPNESS and
press the SELECT switch to access menu.
3. Use the
buttons to select LOW, MID or HIGH.
4. Press the SELECT switch to accept the selection.
8-2-8. WB (WHITE BALANCE)
Selections:
D/N MODE
D/N LEVEL
SHUTTER
GAIN
SYNC
BLC
AUTO
LOW
IRIS
STD
INT
AUTO (default): The white balance is automatically
adjusted corresponding to the color
temperature variations on the object.
The color temperature application is
between 2500K and 10000K.
OFF
INDOOR:
The white balance is fixed at the
color temperature of 3200K.
SHARPNESS MID
WB
AUTO
<OPTION>
BACK
OUTDOOR:
The white balance is fixed at the
color temperature of 5100K.
R: 0-63 B: 0-63: Press the SELECT switch to enter
manual set mode. Using
buttons to adjust R Gain & B Gain
to have a good white balance.Press
the SELECT switch to leave the
manual set mode.
Process:
1. Position the cursor ( ) next to CAMERA SETUP and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to WB and press the SELECT switch to access menu.
3. Use the
buttons to select AUTO, INDOOR, OUTDOOR or R: 0-63 B: 0-63.
4. Press the SELECT switch to accept the selection.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-9. <OPTION>
(1) DNR (DIGITAL NOISE REDUCTION)
Selections:
DNR
CHROMA
BACK
MID
3
LOW:
Enables minimum noise reduction.
MID (default): Enables standard noise reduction.
HIGH:
Enables maximum noise reduction.
Process:
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to OPTION and press
the SELECT switch to access menu.
3. Position the cursor ( ) next to DNR and press the
SELECT switch to access menu.
4. Use the
buttons to select LOW, MID or HIGH.
5. Press the SELECT switch to accept the selection.
(2) CHROMA
Selections:
DNR
CHROMA
BACK
MID
3
The chroma setting is for color gain. Increasing the
number will increase the color.Choose the CHROMA
from 0 to 7 (default = 3).
Process:
1. Position the cursor ( ) next to CAMERA SETUP
and press the SELECT switch to access the
camera menu.
2. Position the cursor ( ) next to OPTION and press
the SELECT switch to access menu.
3. Position the cursor ( ) next to CHROMA and press
the SELECT switch to access menu.
4. Use the
to 7.
buttons to set the CHROMA from 0
5. Press the SELECT switch to accept the setting.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) BACK
Position the cursor ( ) next to BACK and press the
SELECT switch to exit OPTION menu.
DNR
CHROMA
BACK
MID
3
8-2-10. BACK
Position the cursor ( ) next to BACK and press the
SELECT switch to exit CAMERA SETUP menu.
D/N MODE
D/N LEVEL
SHUTTER
GAIN
AUTO
LOW
IRIS
STD
INT
SYNC
BLC
OFF
SHARPNESS MID
WB
AUTO
<OPTION>
BACK
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-11. <PRIVACY ZONE>
Press the SELECT switch down about 2 seconds then
menu will appear on the display.
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
Use the
buttons to select <PRIVACY ZONE>.
EXIT CANCEL DEFAULT
Process:
1. Position the cursor ( ) next to PRIVACY ZONE
and press the SELECT switch to access the menu.
2. Position the cursor ( ) next to ZONE 1 ~ 8 and
press the SELECT switch to access menu.
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
3. Use the
SELECT switch.
The mark will appear on the display.
buttons to select ON and press the
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Use the
press the SELECT switch.
buttons to set ZONE POSI (H) and
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ZONE POSI(H)
5. Use the
press the SELECT switch.
buttons to set ZONE POSI (V) and
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ZONE POSI(V)
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Use the
press the SELECT switch.
buttons to set ZONE SIZE (H) and
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ZONE SIZE(H)
7. Use the
press the SELECT switch.
buttons to set ZONE SIZE (V) and
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ZONE SIZE(V)
8-2-12. BACK
Position the cursor ( ) next to BACK and press the
SELECT switch to exit PRIVACY ZONE menu.
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
ZONE 7
ZONE 8
BACK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
<CAMERA ID>
Press the SELECT switch down about 2 seconds then
menu will appear on the display.
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
Use the
buttons to select <CAMERA ID>.
EXIT CANCEL DEFAULT
8-2-13. CAMERA ID
Position the cursor ( ) next to CAMERA ID and press
the SELECT switch to access the CAMERA ID menu.
Position the cursor ( ) next to CAMERA ID and press
the SELECT switch.
CAMERA ID
ID POS OFF
BACK
Use the
buttons, to name each camera up to 16
characters.
Press the SELECT switch to accept the selection.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-14. ID POS (ID POSITION)
Selections:
OFF (default): Disappear the CAMERA ID.
CAMERA ID
TOP:
Show the ID position top-left of
screen.
Show the ID position bottom-left of
screen.
ID POS OFF
BACK
BOTTOM:
Process:
1. Position the cursor ( ) next to CAMERA ID and
press the SELECT switch to access the camera
menu.
2. Position the cursor ( ) next to ID POS and press
the SELECT switch to access menu.
3. Use the
BOTTOM.
buttons to select OFF, TOP or
4. Press the SELECT switch to accept the selection.
8-2-15. BACK
Position the cursor ( ) next to BACK and press the
SELECT switch to exit CAMERA ID menu.
CAMERA ID
ID POS OFF
BACK
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
8-2-16. EXIT (save the changed settings)
Position the cursor ( ) next to EXIT and press the
SELECT switch to exit menu.
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
EXIT CANCEL DEFAULT
8-2-17. CANCEL (discard the changed settings)
Position the cursor ( ) next to CANCEL and press
the SELECT switch twice to load cancel settings.
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
EXIT CANCEL DEFAULT
8-2-18. DEFAULT (return all settings to factory default)
Position the cursor ( ) next to DEFAULT and press
the SELECT switch twice to load to factory default.
<CAMERA SETUP>
<PRIVACY ZONE>
<CAMERA ID>
EXIT CANCEL DEFAULT
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9. MENU LIST AND SETTINGS
Top Menu
Sub Menu 1 Sub Menu 2
Contents
AUTO / COLOR / B/W
Default
AUTO
LOW
CAMERA SETUP D/N MODE
D/N LEVEL
LOW / MID / HIGH
SHUTTER
IRIS
IRIS
AUTO / 1/60 1/100 1/250 1/500
1/1K 1/2K 1/4K 1/10K 1/100K
GAIN
OFF / STD / HIGH
INT / LL
STD
INT
SYNC
BLC
OFF / BLC1 / BLC2 / BLC3 / BLC4
LOW / MID / HIGH
OFF
MID
SHARPNESS
WB
AUTO / INDOOR / OUTDOOR /
R:0~63 B:0~63
AUTO
OPTION
DNR
LOW / MID / HIGH
MID
CHROMA 0~7
OFF / ON
3
PRIVACY ZONE ZONE 1~8
OFF
All Blank
OFF
CAMERA ID
CAMERA ID
ID POS
16 characters
OFF / TOP / BOTTOM
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
10. NOTES ON USE AND INSTALLATION
• Do not aim the camera at the sun
Never aim the camera at the sun even with the camera power off.
• Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on
the screen. However, this is not a malfunction.
• Treat the camera with care
Do not drop the camera or subject it to strong shock of vibration.
• Never touch internal parts
Do not touch the internal parts of the camera other than the parts specified.
• Do not splash water on the camera
Install the camera where the camera can be kept dry. If the camera gets wet, turn off the power
and contact your dealer.
• Keep the camera installation away from video noise
If cables are wired near electric lighting wires or a TV set, noise may appear in images. In this
event, relocate cables or reinstall equipment.
• Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than the specified operating
range. Doing so could affect the internal parts or cause the image quality to deteriorate. Special
care is required to use the camera at high temperature and humidity.
• Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and contact your dealer.
If you continue to use the camera when there is something wrong with it, the trouble may much
worse and an unpredictable accident may occur.
11. IN CASE OF PROBLEMS
Condition
No image
Check Points
• Are the camera and connected equipment turned on?
• Is the iris of the lens adjusted properly?
• Are cables connected correctly?
• Is the monitor TV adjusted correctly?
• Is the lighting too weak?
Unnatural color
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
12. SPECIFICATIONS
Power
AC 24V ~ 10% 60 Hz/DC 12V
4.5W (max) with Al lens
10%
Power consumption
Image sensor
Image pickup area
1/3 inch CCD image area sensor
4.96 mm (0.195 inch) horizontal × 6.0 mm
(0.236 inch) vertical (1/3 inch type)
Effective picture element
Scanning system
Scanning frequency
Synchronization
768 horizontal × 494 vertical
2:1 interlace NTSC Standard TV system
15.75 kHz horizontal 60 Hz vertical
Line-Lock, Internal manually switchable
Horizontal 540 TV lines (typ)
Resolution
Minimum illuminance of subject 0.2 Lux (F1.2, AGC: HIGH, More than 10% of image output γ = 0.45)
S/N
50 dB or more (AGC off, weight ON)
VBS 1.0V p-p / 75 ohms, composite
75Ω unbalanced
Video output
Output impedance
White balance
Iris control
AUTO (2500K to 10,000K) INDOOR, OUTDOOR, MANUAL
Video Out / Iris Driver Circuit Built in
Average AGC, OFF, STD (24dB), HIGH (30dB)
4 modes BLC function for different application
CS mount
Gain control
Backlight compensation
Lens mount
Ambient temperature
Ambient humidity
Weight
14°F to + 122°F (-10°C to 50°C)
20% to 80%
0.8 lb (360 g)
External dimensions
Automatic electronic shutter
2.48 (W) × 1.97 (H) × 4.57 (D) inches (63 × 50 × 116 mm)
ON (1/60s to 1/100000s) / OFF (1/60s)
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
13. EXTERIOR VIEW
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
CCD SECURITY CAMERA IK-6550A
The Imaging System Division ("ISD") of Toshiba America Information Systems, Inc. makes the following limited warranties with regard to
this CCD Camera Model IK-6550A ("Product"). These limited warranties extend to the Original End-User ("You[r]").
Three (3) Year Limited Warranty of Labor and Parts ISD warrants that this Product will perform in accordance with specifications for a
period of three (3) years from the date of purchase by the Original End-User.During this three (3) year period, ISD will repair or replace the
Product, if it does not perform as warranted. In order to take advantage of this Limited Warranty. You must: (a) call (877) 855-1349 to
receive a RMA number: and (b) pay all transportation and insurance charges for shipment of the Product to the ASP or Toshiba Exchange
Center. ISD reserves the right to substitute factory refurbished parts in place of those in need of repair.
Instruction Manual (Owner's Manual): You should read the Instruction Manual (Owner's Manual) thoroughly before operating this
Product. Before seeking warranty service, you should check the troubleshooting guide in the Instruction Manual (Owner's Manual) and
follow the instructions to correct the problem.
How to Obtain Warranty Service Step-by-step Procedures: To obtain warranty service.You should:
1. Contact Toshiba at (877) 855-1349 to first verify operation or installation assistance. (877) 855-1FIX
2. If technical support determines that the unit is defective, an RMA will be issued with return instructions for repair.
3. Securely pack the Product in the original carton and external shipping pack, include a letter explaining the problem with a copy of the
bill of sale or proof of purchase.
4. Prepay all transportation and insurance costs.
Your Responsibilities: This Limited Warranty is subject to the following conditions:
1. You must provide the bill of sale or proof of purchase at the time that warranty service is required.
2. You must notify (877) 855 1349 within (30) days after you discover that the product does not perform in accordance with specifications
during the Limited Warranty period.
3. You must pack the Product in its original carton using the original packing material. Then insert the original carton containing the
Product into another carton with additional packing material before shipping the Product to an ASP or Toshiba Exchange Center.
DISCLAIMERS: ALL OTHER EXPRESS OR IMPLIED WARRANTIES ON THIS PRODUCT, INCLUDING THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED. SOME STATES DO NOT
ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS. SO
THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER AS WARRANTED ABOVE, YOUR SOLE AND EXCLUSIVE REMEDY
SHALL BE THE REPAIR OF REPLACEMENT OF THE PRODUCT. IN NO EVENT WILL ISD OR ITS PARENT COMPANY OR ANYASP
BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT.
THIS LIMITATION APPLIES TO DAMAGES OF ANY KIND, INCLUDING ANY DIRECT OR INDIRECT DAMAGES, LOST PROFITS,
LOST SAVINGS OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, WHETHER FOR BREACH
OF CONTRACT, TORT OR OTHERWISE, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE SUCH PRODUCT,
EVEN IF TAIS, ITS PARENT COMPANY, OR AN ASP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR OF ANY
CLAIM BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR SOME PRODUCTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM
STATE TO STATE.
THIS LIMITED WARRANTY SHALL BE VOID IF THE PRODUCT OR PARTS HAVE BEEN SUBJECTED TO MISUSE, ABUSE,
ACCIDENT, IMPROPER INSTALLATION, IMPROPER MAINTENANCE, OR USE IN VIOLATION OF ISD'S WRITTEN INSTRUCTIONS,
OR WHERE THE PRODUCT HAS BEEN ALTERED OR MODIFIED WITHOUT ISD'S PRIOR AUTHORIZATION, OR UPON THE
REMOVAL OR ALTERATION OF ISD'S FACTORY SERIAL NUMBER. LABOR SERVICE CHARGES FOR PRODUCT INSTALLATION,
SET UP AND ADJUSTMENT OF CONTROLS ARE NOT COVERED BY THIS LIMITED WARRANTY
No person, agent, distributor, dealer, authorized service provider, or company is authorized to change, modify, or extend the terms of this
Limited Warranty in any manner whatsoever.The time within which an action must be commenced to enforce any obligation of ISD arising
under this Limited Warranty or under any statute, or law of the United States or any state thereof, is herby limited to one (1) year from the
date You discovered or should have discovered the problem. This limitation does not apply to implied warranties arising under state law.
Some states do not permit limitation of the time within whichYou may bring an action beyond the limits provided by state law, so the above
provision may not apply to You. This Limited Warranty gives You specific legal rights and You may also have other rights which vary from
state to state.
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Imaging Systems Division
Download from Www.Somanuals.com. All Manuals Search And Download.
|