OWNER'S MANUAL
Color Television
I
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
34HF83
34HF83
23566174A
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Installation, Care, and Service
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
4) Follow all instructions.
16) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
5) Do not use this apparatus near
water.
17)
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
6) Clean only with a dry cloth.
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
Wide plug
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
20) Never place items such as vases,
aquariums, or candles on top of the TV.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
13) Unplug this apparatus during
lightning storms or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply
cord or plug is damaged, liquid has
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
QUALIFIED
SERVICE
operate normally, or has been dropped.
TECHNICIAN
23) Never overload wall outlets and
extension cords.
15) CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
0303
3
Download from Www.Somanuals.com. All Manuals Search And Download.
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6 to 7 hours to
allow the condensation to evaporate.
24) Always operate this equipment from
a 120 VAC, 60 Hz power source only.
31) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
Antenna lead-in wire
32) During normal use, the TV may make
occasional snapping or popping
Antenna discharge unit
(NEC Section 810-20)
Ground clamp
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
Grounding conductors
(NEC Section 810-21)
Electric service equipment
Power service grounding
33) Possible Adverse Effects on TV Picture Tube: If a fixed
(non-moving) pattern remains on the TV screen for long
periods of time, the image can become permanently
engrained in the picture tube and cause subtle but
permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your TV
on for long periods of time while it is displaying the
following formats or images:
electrode system (NEC Art 250 Part H)
Ground clamps
26)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
• Fixed Images, such as PIP/POP windows, stock tickers,
video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Care
Service
34)
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
27) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
QUALIFIED
SERVICE
TECHNICIAN
35) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
Improper disposal may result in a picture tube implosion
and possible personal injury.
29)
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
4
0303
Download from Www.Somanuals.com. All Manuals Search And Download.
About the auto favorite feature................................ 35
Using the LOCKS menu ............................................... 36
Entering the PIN code ............................................ 36
If you cannot remember your PIN code .................. 36
Using the V-CHIP menu ............................................... 37
ENABLE BLOCKING .......................................... 37
TV RATING (Independent rating system for
Important Safety Information ............................. 2-4
Introduction................................................................ 6
Welcome to Toshiba......................................................... 6
Exploring your new TV ................................................... 6
Note regarding Quick Connect Guide........................ 6
Connecting your TV .................................................. 7
Connecting a VCR .......................................................... 7
Connecting a cable converter box .................................... 8
Connecting a cable converter box and VCR ..................... 8
Connecting a DVD player or satellite receiver and
broadcasters) ........................................................... 37
MPAA RATING (Independent rating system for
movies) ................................................................... 38
BLOCKING OPTION .......................................... 38
Unlocking programs temporarily ............................ 39
Locking channels ........................................................... 39
Locking video inputs ..................................................... 40
Using the game timer ..................................................... 41
Using the front panel lock feature .................................. 41
Changing the PIN code ................................................. 41
Adjusting the picture ..................................................... 42
Selecting the picture mode ...................................... 42
Adjusting the picture quality ................................... 42
Saving your new preferences ................................... 43
Using the flesh tone feature ..................................... 43
Using the CableClear™ DNR feature .................... 43
Selecting the color temperature ............................... 44
Selecting the display format (540p/1080i) .............. 44
Resetting your picture adjustments ......................... 44
Selecting the video input source ..................................... 45
Labeling the video input sources .................................... 45
Using the closed caption feature..................................... 46
Setting the ON timer ..................................................... 47
Setting the sleep timer.................................................... 47
Setting the clock ............................................................ 48
Selecting the background of the menu display ............... 48
Adjusting the sound ....................................................... 49
Muting the sound ................................................... 49
Selecting stereo/SAP broadcasts .............................. 49
Using the WOW™ surround sound feature ........... 50
Adjusting the sound quality .................................... 50
Resetting your audio adjustments ........................... 51
Using the CYCLONE® sub-woofer system ............. 51
Turning off the built-in speakers ............................. 52
Selecting the Audio OUT sound ............................. 52
Using the StableSound® feature .............................. 53
Displaying on-screen information .................................. 53
Viewing the demo mode ................................................ 54
Understanding the auto power off feature ...................... 54
Understanding the last mode memory feature ................ 54
a VCR.............................................................................. 9
Connecting a DVD player with ColorStream®
(component video) and a VCR ...................................... 10
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR ................ 11
Connecting two VCRs ................................................... 12
Connecting a camcorder ................................................ 12
Connecting a device to the DVI/HDCP1 input ............ 13
Connecting an audio system .......................................... 14
Connecting an A/V receiver ........................................... 14
Using the remote control ...................................... 15
Preparing the remote control for use .............................. 15
Installing the remote control batteries ............................ 15
Programming the remote control ............................. 16–17
Using the remote control to operate your other devices .. 18
Learning about the remote control ................................. 19
Setting up your TV .................................................. 20
Learning about the menu system ................................... 20
Changing the on-screen display language ....................... 21
Selecting the antenna input............................................ 21
Programming channels into the channel memory .......... 22
Programming channels automatically ...................... 22
Adding and erasing channels manually.................... 22
Using the Quick Connect Guide ................................... 23
Changing channels ........................................................ 24
Changing channels using SpeedSurf ........................ 24
Adjusting the tilt correction feature................................ 24
Using the TV’s features.......................................... 25
Adjusting the channel settings........................................ 25
Switching between two channels using Channel
Return .................................................................... 25
Switching between two channels using
SurfLock™............................................................. 25
Programming your favorite channels ....................... 25
Labeling channels ................................................... 27
Viewing the wide-screen picture formats ........................ 28
Selecting the picture size ......................................... 28
Scrolling the Theater Wide picture
(Theater Wide 2 and 3 only) .................................. 30
Using the auto aspect feature .................................. 31
Selecting the cinema mode...................................... 31
Using the POP double-window feature .......................... 32
Switching the main and POP pictures..................... 33
Freezing the POP picture ........................................ 33
Adjusting the size of the double-window................. 33
Pop double-window aspect ratio ............................. 34
Using the programmed channel search function............. 34
Using the favorite channel search function .............. 35
Appendix................................................................... 55
Specifications ................................................................. 55
Troubleshooting ............................................................. 56
Limited United States Warranty ..................................... 57
Limited Canada Warranty.............................................. 58
Index .......................................................................... 59
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting
up and operating your Toshiba TV as quickly as possible.
Note regarding
Quick Connect Guide
This manual applies to model 34HF83. Before you start reading,
check the model number on the back of your TV.
The Quick Connect Guide
automatically appears on-screen
the first time the TV is turned on.
This feature provides on-screen
instructions to guide you through
initial setup of your TV.
Instructions in this manual are based on using the remote control.
You can also use the controls on the TV if they have the same name as
those on the remote control.
Please read all the safety and operating instructions carefully, and keep
the manual for future reference.
See page 23 for details.
To stop the Quick Connect
Guide, either press EXIT or turn off
the TV.
Exploring your new TV
You can operate your TV using the buttons on the front panel or the
remote control. The back panel and front panel (behind the door)
provide all the terminal connections you will need to connect other
equipment to your TV. See “Connecting your TV” on page 7.
Remote sensor
MENU x •zy
Power indicator
Remote control
Front
POWER
RECALL
INFO
TV/VIDEO
L/MONO
R
MENU TV/VIDEO VOLUME
CHANNEL
POWER
1
4
2
5
8
3
6
S-VIDEO VIDEO
AUDIO
VIDEO-3 IN
9
CHRTN
7
+10
Video-3
Video/audio inputs
(behind the door)
100
0
ENT
MENU TV/VIDEO
Channel zy
FAV
PIC
SI
ZE
POWER
FAVORITE
Volume x •
MENU
DVDMENU
ENTE
R
ANT OUT
EXIT
FAV
ANT-1 IN
ANT-2 IN
DVI/HDCP IN
TV
CBL/SAT CH
VCR
DVD
VOL
POP DIRECT CH MUTE
SLEEP
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
TV/VCR PAUSE
STOP
PLAY
SPLIT
FREEZE SOURCE
REW
FF
SKIP/SEARCH
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
CH SCAN
REC
SWAP
POP CH
LIGHT
Y
Y
AUDIO
R
L
PB
PR
PB
PR
Back
VIDEO
VIDEO
VIDEO
CT-90159
AUDIO CENTER
CHANNEL IN
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
Video/
Audio OUT
ColorStream ColorStream
HD-1 HD-2
VIDEO 1/2
Audio Center Channel IN
Variable Audio OUT
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
Note: Cables are not supplied with your TV.
●
Coaxial cable is the cable that comes in from your antenna, cable TV
service, or cable converter box. Coaxial cable uses “F” connectors.
Coaxial (antenna) cable
●
Standard A/V (audio/video) cables usually come in sets of three, and
are typically color-coded according to use: yellow for video, red for
stereo right audio, and white for stereo left (or mono) audio.
On your TV’s back panel, the standard A/V inputs are color-coded in
the same manner as the cables.
S-Video cable is for use with video equipment with S-Video output.
Component video cables come in sets of three, (color coded red,
Standard A/V cables (red/white/yellow)
S-video cable
●
●
green and blue) and are for use with video equipment with component
video outputs. ColorStream® is Toshiba’s brand of component video.
●
DVI-D digital single-link cable is for use with video equipment with
DVI-D output (see page 13).
Component video cables (red, green, blue)
DVI-D digital single-link cable
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
●
For GOOD picture quality: Use a standard yellow video cable.
●
For BETTER picture quality: If your equipment has an S-video
input, use an S-video cable instead of a standard yellow video cable.
(You still must connect the standard red and white audio cables for full
system connection, but do not connect the standard yellow video cable at
the same time, or the picture performance will be unacceptable.)
CAUTION:
Do not plug in any power cords until you have
finished connecting all equipment.
●
For BEST picture quality: If your equipment has component video (or
DVI) inputs, use either component video cables (or a DVI cable) instead
of a standard video or S-video cable. (You still must connect the standard
red and white audio cables for full system connection, but do not connect
the standard yellow video cable or an S-Video cable at the same time.)
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
Note:
From Cable Box or Antenna
Stereo VCR
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
VIDEO
AUDIO
If you have a VCR with S-video, use an S-
video cable (plus audio cables) instead of the
standard video cable.
L
R
IN
OUT to TV
IN from ANT
CH 3
CH 4
OUT
Do not connect a standard video cable and
an S-video cable to VIDEO 1 (or VIDEO 2) at
the same time, or the picture performance
will be unacceptable.
(
)
ANT 75
DVI/HDCP IN
A
OUT
ANT-2
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PB
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
ON OFF
R
R
R
R
IN
OUT
TV
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a cable box
This connection allows you to watch basic and premium cable channels
.
Note:
When you use a cable box with your TV, the
remote control will not operate some features,
such as programming your favorite channels,
labeling channels, and locking channels.
To watch basic cable and use the TV’s features, select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the cable box to
change channels.
You will need:
• three coaxial cables
From Cable
TV
(
)
ANT 75
DVI/HDCP IN
ANT-1
A
OUT IN
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
Cable box
P
B
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
P
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
Connecting a cable box and VCR
This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To watch basic cable and use the TV’s
features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the cable box to change channels.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S–Video cable (plus audio cables) instead of
a standard video cable. Do not connect a
standard video cable and an S-video cable to
VIDEO 1 (or VIDEO 2) at the same time or
the picture performance will be unacceptable.
You will need:
• four coaxial cables
• one set of standard A/V cables
When you use a cable box with your TV, the
remote control will not operate some features,
such as programming your favorite channels,
labeling channels, and locking channels.
From Cable
TV
(
)
ANT 75
DVI/HDCP IN
A
ANT-2
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
IN
Y
Y
AUDIO
R
L
OUT
P
B
R
PB
Cable box
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
ON OFF
R
R
R
R
IN
OUT
L
L
R
IN
OUT to TV
IN from ANT
OUT
CH 3
CH 4
R
VIDEO
AUDIO
Stereo VCR
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player or satellite receiver
(without component video) and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.
Note:
For the highest possible picture quality from a
non-component video DVD player/satellite
receiver, use an S-video cable. (If your DVD
player or satellite receiver has component
video, see page 10).
You will need:
• two coaxial cables (three if satellite receiver is used)
• one set of standard A/V cable
• one pair of audio cables
Do not connect an S-video cable and a
standard video cable to VIDEO 1 (or VIDEO
2) at the same time or the picture
• one S-video cable (between the TV and DVD player/satellite
receiver)
performance will be unnacceptable.
Do not connect the DVD player/satellite
receiver and VCR to the same set of A/V
inputs on the TV. (See the illustrations, which
show the DVD player/satellite receiver
connected to VIDEO 1 on the TV, and the
VCR connected to VIDEO 2 on the TV.)
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
From
OUT
Antenna
TV
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
(
)
ANT 75
DVI/HDCP IN
A
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
L/
L/
L/
MONO
MONO
MONO
L
L
VAR
DIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
DVD Player
AUDIO
OUT
L
R
S-VIDEO VIDEO
OUT OUT
From
Satellite
Dish
Satellite Receiver
AUDIO
OUT
L
IN from ANT
R
S-VIDEO VIDEO
OUT OUT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player (with component
video) and a VCR
Note:
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
For the highest possible picture quality, use
component video cables (or a DVI-D single-
link cable) between the TV and DVD player.
You can connect the component video cables
from the DVD player to either ColorStream
jack on the TV (HD-1 or HD-2).
Your TV has ColorStream® (component video) inputs. Connecting
your TV to a DVD player with component video inputs (such as a
Toshiba DVD player with ColorStream®) can greatly enhance picture
quality and realism.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlace (480i,1080i) scan systems.
– To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD-1 on the TV (see
“Selecting the antenna input” on page 21).
If your DVD player does not have component
video inputs, use the S-video connections
(plus the standard audio connections) instead
of the ColorStream connections; however, do
not connect both S-Video and standard video
cables between the TV and DVD player at the
same time. See page 9.
You will need:
• two coaxial cables
• one set of standard A/V cables
• one pair of audio cables
• one set of component video cables
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Stereo VCR
IN from ANT OUT to TV
VIDEO
AUDIO
L
R
From Antenna
IN
CH 3
CH 4
OUT
TV
(
)
ANT 75
DVI/HDCP IN
A1
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
P
B
R
P
B
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
AUDIO
OUT
L
L
Y
PB
PR
R
R
VIDEO
OUT
S-VIDEO
COMPONENT VIDEO
DVD Player with component video
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DTV receiver/set-top box (with
component video) and a VCR
Note:
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.
For the highest possible picture quality, use
component video cables (or a DVI-D single-
link cable) between the TV and DTV receiver.
You can connect component video cables to
either set of ColorStream jacks on the TV
(HD-1 or HD-2).
Your TV has ColorStream (component video) inputs. Connecting
your TV to a DTV receiver with component video inputs can greatly
enhance picture quality and realism.
– To record and watch a DTV program, select LINE IN on the
VCR, and select ColorStream HD-2 (or VIDEO 1 for a non-
ColorStream connection) on the TV (see “Selecting the antenna
input” on page 21).
– To record a TV program while watching a DTV program, tune the
VCR to the channel to record, and select ColorStream HD-2 on
the TV.
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlaced (480i,1080i) scan systems. A 1080i
signal will provide the best picture
performance.
If your DTV receiver does not have
component video inputs (or DVI/HDCP
video), use the S-video and standard audio
connections instead of the ColorStream
connections. Do not connect both an S-video
and a standard video cable to VIDEO 1 (or
VIDEO 2) at the same time or the picture
performance will be unacceptable.
– To record and watch the same TV program, tune the VCR to the
channel to record, and select VIDEO 1 on the TV.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
You will need:
To monitor recording, set the TV to VIDEO 1.
For DVI/HDCP connection, see page 13.
• three coaxial cables
• two sets of standard A/V cables
• one pair of standard audio cables
• one set of component video cables
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Stereo VCR
IN from ANT OUT to TV
From
Antenna
VIDEO
AUDIO
L
R
IN
CH 3
CH 4
OUT
TV
(
)
ANT 75
DVI/HDCP IN
A
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
P
B
R
P
B
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
AUDIO
OUT
From
DTV Antenna
L
L
Y
PB
PR
Satelite IN
R
R
IDEO
OUT
S-VIDEO
COMPONENT VIDEO
DTV Receiver with component video
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
VCR1
IN from ANT OUT to TV
VIDEO
AUDIO
Note:
L
R
From Antenna
If VCR1 has S-video you can use an S-video
cable instead of the standard video cable for
better picture performance. Do not connect
both a standard video cable and an S-video
cable to VIDEO 1 (or VIDEO 2) at the same
time, or the picture performance will be
unacceptable.
IN
CH 3
CH 4
OUT
TV
(
)
ANT 75
DVI/HDCP IN
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
A
OUT
ANT-2
To dub or edit, VCR 2 must select Line IN,
and the TV must select VIDEO 1 (see
“Selecting the antenna input” on page 21).
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PB
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
VCR2
VIDEO
AUDIO
L
R
IN
CH 3
CH 4
OUT
The Video OUT jack does not output the
POP picture.
*
*
**
**The Audio OUT jacks can output the sound
of either the Main or POP picture (see
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
“Selecting the Audio OUT sound” on page
52).
You will need:
• one set of standard A/V cables
Camcorder
Note:
If your camcorder has S-video, you can use
an S-video cable instead of the standard
video cable for better picture performance.
Do not connect both a standard video cable
and an S-video cable at the same time, or the
picture performance will be unacceptable.
VIDEO AUDIO
OUT
L
R
L/MNO
S-VIDEO VIDEO
VIDEO-3 IN
AUDIO
Video-3 (front panel)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a device to the DVI/HDCP1 input
The DVI/HDCP input on your TV is designed to accept HDCP
program material in digital form from EIA/CEA-861–compliant2
consumer electronic devices, such as a set-top box or DVD player
equipped with a DVI-D digital single-link output connection.3
Note:
1
DVI/HDCP = Digital Visual Interface/
High-bandwidth Digital Content Protection.
2
EIA/CEA-861 compliance covers the
transmission of uncompressed digital
video with high-bandwidth digital content
protection, which is being standardized for
reception of high-definition video signals.
Consult your consumer electronics dealer
for availability.
The DVI/HDCP input is designed for best performance with 1080i
high-definition video signals. The DVI/HDCP input also will accept
and display 480p, 480i and 720p picture signals.
Note: This TV is not intended for connection to
and should not be used with a PC (personal
computer).
3
You will need:
• one coaxial cable
• one pair of standard audio cables
• one DVI-D digital single-link cable
Note: For proper operation, the DVI-D cable length
should not exceed 3m (9.8 ft). The recommended
length is 2m (6.6 ft).
Caution:
To ensure that the DVI/HDCP device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic
components, turn on the TV first,
and then the DVI/HDCP device.
• When turning off your electronic
components, turn off the DVI/HDCP
device first, and then the TV.
DVI/HDCP device
(for example, set-top box or DVD player)
DVI/HDCP
OUT
VIDEO
AUDIO
L
R
IN
OUT
TV
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
From
Antenna
or Cable
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
P
B
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
P
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier
Connecting an audio system
LINE IN
L
R
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see “Turning off the built-in speakers”
on page 52).
TV
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
You will need:
COLOR
COLOR
VIDEO
1
VIDEO
2
STREAM HD-1 STREAM HD-2
S-VIDEO S-VIDEO
Y
Y
AUDIO
• one pair of audio cables
Note:
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).
R
L
P
B
R
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
P
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
IN
R
R
R
OUT
For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.
Caution:
To avoid damaging the speakers:
Connecting an A/V receiver
This connection allows you to use an audio/video (A/V) receiver to
enhance your TV’s sound.
• Turn off the TV before connecting or
disconnecting the Audio Center Channel
cable.
If you have a sound system with Dolby Surround Pro Logic, you can
add to the realism of the sound by using the TV’s internal speakers as
center channel speakers.
• Do not connect from the A/V receivers
ampliphied center speaker OUT to the TV’s
Audio Center Channel IN.
You will need:
• one set of standard A/V cables
• one single standard audio cable for the audio center channel
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
Dolby Surround Pro Logic* sound
system connection example
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
Audio
Video
Video
Audio
P
B
R
P
B
R
VIDEO
VIDEO
VCR
LDP/DVD
VIDEO
AUDIO CENTER
CHANNEL IN
P
P
L/
L/
L/
MONO
MONO
MONO
ON
OFF
L
L
L
VAR
AUDIO
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
ON OFF
R
R
R
R
IN
OUT
A/V receiver
TV
Video
OUT
Audio
Center
OUT
IN
L
AUDIO
R
A/V Receiver
T V
Left
speaker
Right
speaker
Note:
Refer to the instructions provided with your A/V receiver
for details about your surround sound system.
When the Audio Center Channel ON/OFF switch is in
the ON position, the TV speakers will function only as
center channel speakers.
Surround
speaker L
Surround
speaker R
Adjust the volume for the center channel speakers
using the center level control on the A/V receiver.
To use the TV speakers as normal speakers, set the
Audio Center Channel ON/OFF switch to the OFF
position.
_________
* “Dolby” and “Pro Logic” are trademarks of
Dolby Laboratories.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Preparing the remote control for use
Your TV remote control can operate your TV and many brands of
cable boxes, satellite receivers, VCRs, DVD players, and HTIBs
(home theater in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most Toshiba
devices. See page 18.
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
You can program the TV remote control so it will operate the other
device. See pages 16–18.
Installing the remote control batteries
1. Remove the battery cover from the back of the remote control.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
Squeeze tab and
lift cover.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.
2. Install two “AA” size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.
• If the batteries are dead or if you will not
use the remote control for a long time,
remove the batteries to prevent battery acid
from leaking into the battery compartment.
Note:
If your Toshiba TV remote control does not
operate all the features of your other device,
use the original remote control for that device.
3. Reinsert the battery cover in the remote control until the tab
snaps.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the remote control
Your Toshiba TV remote control is preprogrammed to operate most
Toshiba devices. To program your TV remote control to operate a
non-Toshiba device or a Toshiba device that the remote control is not
preprogrammed to operate, follow the steps below. For details on
using the remote control to operate the device, see page 18.
RECALL
POWER
POWER
RECALL
INFO
TV/VIDEO
1. In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.
1
4
2
5
8
3
6
Channel
Number
9
CHRTN
7
2. Set the Device Switch to the type of device you are programming
the remote control to operate — CBL/SAT (for a cable converter
box or satellite receiver), VCR (for a VCR or TV/VCR combo),
or DVD (for a DVD player or HTIB [home theater in a box]).
+10
100
0
ENT
FAV
PIC SIZE
FAVORITE
3. While holding down RECALL, press the Channel Number
MENU
DVDMENU
buttons to enter the 3-digit code for your device.
ENTER
4. To test the code, turn on the device, point the remote control at
EXIT
FAV
it, and press POWER.
TV
Device Switch
CBL/SAT CH
VCR
VOL
• If the correct code was entered, the device will turn off.
DVD
• If the device does not respond, repeat steps 1 – 4 using
another code.
• If the device does not respond to another code, you will need
to use the remote control that came with the device.
Note:
• Every time you change the batteries, you
will need to reprogram the remote control.
Note: In addition to POWER, confirm that all necessary keys on the TV remote
control operate your device. If some keys are not operational, repeat the device
code setup using another code (if other codes are listed for your device). If, after
trying all listed codes, the necessary keys do not operate your device, use the
device’s original remote control.
• Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
“VCR1/VCR2.” If your VCR has this kind of
switch and does not respond to the codes
for your VCR brand, set the switch to the
other position (“VCR1” or “VCR2”) and
reprogram the remote control.
5. Remember to set the Device Switch back to TV to control the TV.
6. For future reference, write down the code(s) you used:
DEVICE
CODE
DEVICE
CODE
Remote control codes
In some cases you may not be able to operate your device with the TV
remote control. Your other device may use a code that is not
recognized by the TV remote control. If this happens, you will need
to use the remote control provided with the device.
Hitachi: 062, 095, 096
Jasco: 097
Jerrold: 062, 069, 071,
082, 086, 089, 091,
096
Magnavox: 072, 096
Memorex: 091, 092, 104
Multi Canal: 090
Novavision: 101
Panasonic: 081, 083, 085
Philco: 087
Philips: 066, 067, 068,
070, 072, 073, 074,
075, 091, 092
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,
078, 079, 080, 088,
098, 101, 105
U. S. Electronics: 087,
096, 098
United Cable: 082
Universal: 065, 092, 097,
099, 102, 103
General Instruments:
010, 011, 012, 022,
023, 031, 049
Hitachi: 033
Hughes: 033
Hughes Network
Systems: 019
Cable box
ABC: 061, 062, 063,
082, 084, 087, 091,
092, 096, 098
Archer: 065, 092, 097,
099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,
088, 093, 098
Diamond: 093
Eagle: 091
GE: 061, 062
Gemini: 069, 070, 094
General Instruments:
062, 089, 096
Wards: 096
Sears: 095
Signature: 062
Intersat: 048
Janeil: 027
Satellite receiver
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,
096, 103, 104
Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
Alphastar: 038, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044,
046, 050, 053
Echostar: 018, 041, 051
Express Vu: 057
Fujitsu: 027
JVC: 017, 057
Kenwood: 029
Magnavox: 060
Optimus: 058
Pansat: 036, 052
Primestar: 015, 042
Proscan: 008, 009, 013
Radio Shack: 022, 023,
030
Pioneer: 076, 077
Proscan: 061, 062
Radio Shack: 092, 097,
099
Texscan: 100
Tocom: 071, 084, 085
GE: 008, 009, 013
Hamlin: 093
RCA: 064, 081
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control codes (cont.)
Hitachi: 005, 032, 033,
Colortyme: 005
Craig: 009, 010, 016,
061, 065, 079
Curtis Mathes: 001, 005,
009, 012, 014, 040,
048, 053, 056, 057
Daewoo: 011, 013, 015,
017, 018, 019, 057,
078
Daytron: 078
Denon: 063
Dimensia: 001, 048
Electrohome: 010, 020,
065
Emerson: 003, 008, 010,
011, 017, 018, 020,
028, 039, 054, 057,
062, 065, 068, 072
Fisher: 007, 016, 021,
022, 023, 057, 064,
068, 070, 071, 079
Fuji: 004, 041
Memorex: 007, 009,
010, 016, 018, 034,
049, 063, 065, 066,
068, 075, 079
MGA: 020, 028, 039
MGN: 056
Minolta: 024, 025, 035,
063
Mitsubishi: 020, 024,
025, 028, 039, 043,
065
Sanyo: 007, 009, 016,
054, 064, 068, 071,
075, 079, 085
Scott: 008, 011, 017,
028, 030, 057, 065,
072
Sears: 007, 010, 016,
021, 022, 023, 024,
025, 035, 053, 057,
063, 064, 065, 068,
071, 075, 079
Sharp: 013, 020, 031,
049, 051, 060, 066
Shintom: 004, 025, 032,
061
Satellite receiver
(cont.)
034, 035
JVC: 003, 007, 036,
RCA: 008, 009, 013, 016
042, 088
Realistic: 030
Samsung: 059
Kenwood: 037
Konka: 008, 009
Sony: 014, 055
Magnavox: 004, 038
Star Choice: 057
Memorex: 039
Star Trak: 025, 026, 037,
Mintek: 040
054
STS: 024
NAD: 026
Nakamichi: 041
Toshiba: 000, 001, 002,
Norcent: 043
Montgomery Ward: 049
Motorola: 049
003, 004, 005, 006,
Onkyo: 044
007, 020, 031, 056
Oritron: 058
MTC: 009, 046, 061
Multitech: 009, 012, 018
NEC: 005, 006, 007,
012, 014, 037, 043,
053, 054, 067, 070
Nikko: 010
Noblex: 009
Optimus: 010, 049, 065
Optonica: 031
Orion: 054, 057, 062,
065, 068, 072
Panasonic: 036, 045,
046, 057, 061, 072,
079
Pentax: 012, 024, 025,
035, 042, 053, 063
Pentex Research: 014
Philco: 026, 027, 063
Philips: 026, 031, 044,
057
Pioneer: 006, 024, 043,
055
Portland: 012, 013, 015
Proscan: 001, 002, 048
Proton: 061
Quasar: 045
Radio Shack: 010, 031,
065
Radio Shack/Realistic:
007, 009, 010, 016,
018, 020, 021, 022,
031, 049
Uniden: 021, 028, 030,
Panasonic: 010, 045,
032, 035, 039, 043,
046, 047, 048, 049,
045, 047, 058
Signature: 049
050
Signature 2000: 075
Singer: 047, 061
Sony: 004, 032, 033,
041, 052, 058, 070,
074, 076, 077, 080
STS: 035
Sylvania: 018, 026, 027,
028, 044, 072
Symphonic: 018, 050,
051, 053, 073, 079
Tandy: 007
Tashiko: 010
Tatung: 037
Teac: 018, 029, 037
Technics: 036
Teknika: 010, 018, 065
Toshiba: 000, 011, 021,
023, 024, 028, 030,
039, 057, 074, 078,
079
Totevision: 009, 010,
065
Unitec: 073
Zenith: 027
Philips: 004, 051
Pioneer: 052, 053, 054,
TV/VCR Combo
055
Action: 078
GE: 059, 062
Goldstar: 065
Panasonic: 065
Precision: 078
Quasar: 065
Realistic: 079
Sony: 074
Proscan: 001, 056
Qwestar: 057, 058
RCA: 001, 002, 059, 089 Funai: 018, 073
Sampo: 060
Samsung: 061, 062, 086,
090
Garrard: 018
GE: 001, 002, 009, 040,
042, 048, 056
Go Video: 056, 059,
061, 081
Goldstar: 005, 010, 014,
054, 056, 065, 067
Gradiente: 018, 065
Harman Kardon: 005
Hitachi: 024, 025, 035,
037, 042, 063, 070,
080
Sansui: 073
Sanyo: 063, 091
Sharp: 064, 067
Sherwood: 074
Sony: 011, 012, 065,
066, 068, 069, 070
Sylvania: 027
Toshiba: 057
Zenith: 065
DVD/VCR Combo
Go Video:
DVD=087, VCR=081
JVC:
DVD=088, VCR=082
RCA:
DVD=089, VCR=083
Samsung:
DVD=090, VCR=084
Sanyo:
DVD=091, VCR=085
Zenith:
Teac: 071
Technics: 072
Techwood: 075
Toshiba: 000, 013, 076,
077, 078
Yamaha: 079, 080, 081
Zenith: 014, 082, 092
JBL: 076
JC Penney: 005, 006,
007, 008, 009, 010,
023, 024, 025, 026,
035, 056, 061, 063,
065
Unitech: 009
Vector Research: 005,
006, 011, 012, 053
Video Concepts: 005,
006, 011, 012, 039,
053
Wards: 009, 010, 011,
016, 018, 020, 024,
025, 031, 035, 049,
051, 056, 057, 060,
065, 066, 079
White Westinghouse:
073
XR-1000: 018
Yamaha: 005, 006, 007,
014, 037, 053
Zenith: 004, 032, 034,
041, 047, 069, 086
Jensen: 024, 025, 037,
050
Portable DVD player
Aiwa: 093
Audiovox: 094, 095
Panasonic: 024, 096, 099
RCA: 098
JVC: 005, 006, 007,
014, 037, 043, 050,
062, 063, 068, 082
Kenwood: 005, 006,
007, 012, 014, 037,
043, 050, 053, 068,
071
Kodak: 010
LG: 010
Lloyds: 053, 073, 079
Logik: 061
LXI: 010
Magnasonic: 061, 065,
078
Magnavox: 026, 027,
034, 044, 057, 061,
072
Marantz: 005, 006, 007,
012, 014, 026, 053,
067
DVD=092, VCR=086
Radix: 010
DVD player
RCA: 001, 002, 003,
009, 024, 025, 029,
035, 040, 042, 045,
048, 055, 056, 063,
071, 083
Realistic: 007, 009, 010,
011, 016, 018, 020,
021, 022, 031, 049,
051, 056, 060, 065,
075, 079
Ricoh: 047
Runco: 034
Samsung: 009, 011, 038,
056, 073, 084
Sansui: 006, 037, 043,
061
Aiwa: 006, 015
Apex: 016, 017
BOSE: 097
Broksonic: 018
Clarion: 019
Classic: 020
Daewoo: 021
Denon: 022, 023, 024,
025
Emerson: 026, 027
Fisher: 028
VCR
Admiral: 049
Aiko: 019
Aiwa: 018
Akai: 003, 004, 037,
038, 039, 058, 069
Audiovox: 010
Bell & Howell: 007, 068
Broksonic: 008, 017
Calix: 010
Carver: 026
CCE: 019
Citizen: 009, 010, 011,
012, 013, 014, 015,
019, 057, 073
Funai: 027
HTIB
GE: 001, 029, 030
Go Video: 087
GPX: 031
Lasonic: 083
Panasonic: 084
Venturer: 085
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control to operate your other
devices
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 16 and 17.
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device’s original remote
control.
To use your TV remote control to operate a:
• cable box or satellite receiver, set the Device Switch to CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Point the remote control
directly at the device.
POWER
RECALL
INFO
TV / VIDEO
POWER
Turns the selected device on and off.
INFO (CBL/SAT only)
Displays on-screen information.
1
4
2
5
8
3
6
Channel Numbers (0-9)
Press to directly access channels
(as opposed to CH y z).
9
CHRTN
7
+10
+10 (DVD only)
Press to directly access
100
0
ENT
DVD chapters higher than 10.
FAV
PI
C
S
GUIDE (CBL/SAT only)
I
ZE
Displays channel guide.
TOP MENU (DVD only)
Accesses a DVD’s top menu.
MENU
DVDMENU
y z x • (DVD only)
Press to navigate DVD menus
ENTER
Required by some VCRs and cable
converter boxes to change the channel.
(may not work on some DVD players).
CLEAR (DVD only)
Press to reset the title and chapter
number.
EXIT
FAV
Device Switch
Set to “TV” to control the TV; “CBL/SAT” to
control a cable box or satellite receiver;
“VCR” to control a VCR; “DVD” to control
a DVD player or HTIB.
TV
CBL/SAT CH
VCR
VOL
CH y z
DVD
y selects the next higher channel;
z selects the next lower channel.
POP DIRECT CH MUTE
SLEEP
PAUSE
Press during play or record mode to
pause the picture; press again to restart.
TV/VCR PAUSE
STOP
PLAY
SPLIT
PLAY
FREEZE SOURCE
TV/VCR (VCR only)
To view one program while recording
another, press to select TV mode.
Begins playback of a tape or DVD.
REW
FF
SKIP/SEARCH
STOP
CH SCAN
REC
SWAP
POP CH
LIGHT
Stops the tape or DVD.
REW
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
SKIP/SEARCH
Skips forward to later DVD chapters.
(DVD only)
REC (VCR only)
Starts tape recording.
SKIP/SEARCH
Skips back to beginning of current DVD
chapter or previous chapters.
(DVD only)
FF
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about the remote control
The buttons used for operating the TV only are described here.
POWER turns the TV on and off
POWER
RECALL
INFO
TV / VIDEO
RECALL displays screen information (page 53)
SLEEP sets the TV to turn off at a specific time (page 47)
TV/VIDEO selects video input source (page 45)
MUTE mutes the sound (page 49)
1
4
2
5
8
3
6
9
CHRTN
7
Device Switch switches between TV, CLB/SAT/VCR, and DVD (Pages 16-18)
+10
Set to “TV” to control the TV.
100
0
ENT
CH (channel) y z cycles through programmed channels (page 24)
Channel Numbers (0-9, 100) allow direct access to channels (page 24)
VOL (volume) y z adjusts the volume level
FAV
PIC SIZE
MENU
DVDMENU
CH RTN returns to the memorized channel (page 25)
ENTER
MENU allows access to on-screen programming menus (page 20)
ENTER sets programmed menu information (page 20)
y z x • select or adjust programming menus (page 20)
POP CH y z selects the POP (picture-out-picture) channel (page 32)
FAV y z cycles through favorite channels (page 26)
T
EXI
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH MUTE
SLEEP
TV/VCR PAUSE
STOP
PLAY
SPLIT
FAVORITE allows access to the favorite channel search function (page
FREEZE SOURCE
FF
35)
REW
SKIP/SEARCH
CH SCAN
REC
SWAP
POP CH
LIGHT
PIC SIZE cycles through the five picture sizes: Natural, Theater Wide
1, 2, 3, and Full (page 28)
EXIT exits programming menus (page 20)
SPLIT turns the POP feature on and off (page 32)
SOURCE selects the POP picture source (page 32)
FREEZE freezes the POP picture (page 33)
CT-90159
SWAP switches the main and POP pictures (page 33)
POP DIRECT CH allows direct access to POP channels (page 32)
CH SCAN allows access to the programmed channel search function (page 34)
LIGHT illuminates the keypad for five seconds
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
Learning about the menu system
Note regarding
After you have installed the batteries and programmed the remote
control, you will need to set some preferences on the TV using the
menu system. You can access the menu system using the buttons on
your TV or remote control.
1. Press MENU to display the menu system.
2. Press x or • to select a menu.
Quick Connect Guide
The Quick Connect Guide
automatically appears on-screen the
first time the TV is turned on. This
feature provides on-screen
instructions to guide you through
initial setup of your TV.
3. Press y or z select an item.
4. Press x or • to select or adjust a setting.
See page 23 for details.
To stop the Quick Connect Guide,
either press EXIT or turn off the TV.
P I CTURE ANTENNA
MODE
SPORTS
CONTRAST
BR IGHTNESS
COLOR
1 0 0
5 0
5 0
T I NT
SHARPNESS
RESET
SAVE NEW PRE
P I CTURE ANTENNA
E
TV front panel
: SELECT
MODE
SPORTS
MENU TV/VIDEO VOLUME
CHANNEL
FLESH TONE
CableClear DNR
COLOR
ON/ OFF
OFF
W
TEMPERATURE
DISPLAY FORM
SAVE NEW PRE
: MOVE
AUDI O
MTS
BASS
TREBLE
BALANCE
RESET
STEREO
50
50
0
MENU
x •zy
: SELECT
E
AUDI O
CYCLONE
ON/ OFF
7 0
ON
CYC LEVEL
SPEAKERS
AUDI O OUT
MAI N
STABLE SOUND ON
POWER
RECALL
INFO
TV/VIDEO
: MOVE
: SELECT
1
4
2
5
8
3
6
9
CHRTN
7
THEATER
+10
WOW
SRS 3D
FOCUS
ON
ON
100
0
ENT
T r u B a s s
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCRO
C I NEMA MODE
FAV
PIC
SIZE
ORITE
FAV
SET UP
: SELECT
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
CABLE
MENU
yzx •
MENU
DVDMENU
TV / CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
QU I CK CONNEC
ADD
0
ENTER
EXIT
EXIT
FAV
: SELECT
CUSTOM
T I MER
ON
SLEEP
CC
TV
0 0 h 0 0 m
0 h 0 0 m
OFF
CBL/SAT CH
VCR
VOL
ENTER
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
DVD
V I
LABEL
DEO
POP DIRECT CH MUTE
SLEEP
BACKGROUND
: SELECT
TV/VCR PAUSE
STOP
PLAY
SPLIT
LOCKS
V–CH I P
ENABLE BLOCK I NG OFF
TV RAT I NG
FREEZE SOURCE
REW
FF
SKIP/SEARCH
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
CH SCAN
REC
SWAP
POP CH
LIGHT
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
: SELECT
EXIT : END
CT-90159
• Press ENTER to activate the function settings in the menus.
• The main menu display will disappear automatically if you do
not make a selection within 15 seconds. If you want to close all
the on-screen displays instantly, press EXIT.
Note:
You can change the background of the
menu. See page 48 for details.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
TV front panel
MENU TV/VIDEO VOLUME
CHANNEL
W
To select a language:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight LANGUAGE.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
MENU
1
2
3
4
5
6
7
1
2
3
4
5
6
7
x •zy
SET UP
LANGUAGE ENGL I SH FRANCA I S
CLOCK SET
8
9
8
9
/
ESPANOL
/ - - : - -
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
ANT1 / 2
TV / CABLE
ANT1
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
QU I C K CONNECT GU I DE
POWER
RECALL
TV/VIDEO
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
INFO
TV/VIDEO
1
4
2
3
6
3. Press x or • to highlight your desired language.
5
8
9
CHRTN
7
Selecting the antenna input
You can connect to two different antenna input sources (ANT 1 or
ANT 2).
+10
100
0
ENT
FAV
PIC SIZE
FAVORITE
To select the antenna input using the menu system:
MENU
yzx •
MENU
DVDMENU
1. Press MENU, and then press x or • to highlight the SET UP
menu.
ENTER
EXIT
FAV
2. Press y or z to highlight ANT 1/2.
TV
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
CBL/SAT CH
VCR
VOL
1
2
3
4
5
6
7
1
2
3
4
5
6
7
DVD
SET UP
8
9
8
9
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1 / ANT2
CABLE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
TV / CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
QU I C K CONNECT GU I DE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
3. Press x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
To select the antenna input using the TV/VIDEO button:
1. Press the TV/VIDEO button on the remote control or TV (see
illustrations below). The current signal source displays in purple.
TV front panel
2. Continue pressing the TV/VIDEO button to select ANT 1 or
ANT 2.
MENU TV/VIDEO VOLUME
CHANNEL
O
SOURCE SELECT ION
SOURCE SELECT ION
ANT
1
0 : ANT
1 : V IDEO
2 : V IDEO
V IDEO
1
V IDEO
V IDEO
V IDEO
1
2
3
1
2
3
3 :
TV/VIDEO
Col orSt ream HD1
Col orSt ream HD2
DVI
4 : Col orSt ream HD1
5 : Col orSt ream HD2
:
:
6
7
DVI
ANT
ANT
2
2
:
TV / V I DEO TO SELECT
0
7 : TO SELECT
Please note the following regarding
the DVI source selection:
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or 0-7
to change)
Pressing TV/VIDEO on the TV changes
the current signal source
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
a device to the DVI/HDCP input” on
page 13 for details.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming channels into the Channel
memory
Note:
To tune the TV to a channel not programmed
in the channel memory, you must use the
Channel Number buttons on the remote
control.
When you press Channel y or z, on the TV or remote control your
TV will stop only on the channels stored in the channel memory.
Follow the steps below and on the next page to program all active
channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the channel memory. After the channels are stored
automatically, you can manually add or erase individual channels (see
“Adding and erasing channels manually,” below).
POWER
RECALL
INFO
TV/VIDEO
To program channels automatically:
1. Press MENU, and then press x or • until the SET UP menu
1
4
2
5
8
3
6
appears.
2. Press y or z until TV/CABLE is highlighted.
Channel
Number
9
CHRTN
7
3. Press x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV; if you use
cable, highlight CABLE.
+10
100
0
ENT
FAV
PIC SIZE
FAVORITE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
MENU
yzx •
MENU
DVDMENU
SET UP
ENTER
8
9
8
9
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
EXIT
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
FAV
TV / CABLE
TV / CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
TV
Channel yz
ADD
0
CBL/SAT CH
VCR
VOL
QU I C K CONNECT GU I DE
DVD
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
4. Press z to select CH PROGRAM.
TV front panel
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
MENU TV/VIDEO VOLUME
CHANNEL
W
SET UP
8
9
8
9
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
QU I C K CONNECT GU I DE
MENU
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
x •zy
5. Press x or • to start channel programming. The TV will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
“Programming Now—Please Wait” appears.
6. When channel programming is complete, the message
“Completed” appears.
7. Press Channel y or z to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press y or z to highlight ADD/ERASE.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
SET UP
8
9
8
9
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD / ERASE
0
QU I C K CONNECT GU I DE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
POWER
RECALL
INFO
TV/VIDEO
Using the Quick Connect Guide
The Quick Connect Guide automatically starts the first time the TV
is turned on. This feature provides on-screen instructions to guide you
through setting up your TV.
To mannually start the Quick Connect guide and change the current
settings:
1
4
2
5
8
3
6
9
CHRTN
7
+10
100
0
ENT
FAV
PIC SIZE
1. Press MENU, and then press x or • until the SET UP menu
FAVORITE
appears.
MENU
yzx •
MENU
DVDMENU
2. Press y or z to highlight “QUICK CONNECT GUIDE”.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
ENTER
1
2
3
4
5
6
7
1
2
3
4
5
6
7
EXIT
FAV
TV
SET UP
CBL/SAT CH
VCR
VOL
8
9
8
9
DVD
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
QU I C K CONNECT GU I DE
Note:
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
To stop the Quick Connect Guide, press EXIT
or turnoff the TV.
3. Press x or • to enter the Quick Connection Guide mode.
Advance the setup according to the guide displayed on the screen.
You can set up the following items.
On-screen display language selection
▼
Yes
No
Cable box selection (Yes/No)
▼
▼
Cable box connection
Cable or Antenna connection
▼
▼
Cable box output channel selection
(ch3/ch4)
TV (antenna)/Cable source selection
▼
▼
Select channels using Cable box
(Confirmation only)
Automatic channel programming
Clock setting
▼
Picture mode selection
▼
Basic setup has been completed
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing channels
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
Channel
Number
To change to the next programmed channel:
9
CHRTN
7
Press Channel y or z on the TV or remote control.
+10
100
0
ENT
Changing channels using SpeedSurf
FAV
PIC SIZE
FAVORITE
To use SpeedSurf to change to a specific programmed channel:
MENU
DVDMENU
1. Press and hold Channel y or z for about one second. The TV
will enter the SpeedSurf mode.
ENTER
EXIT
FAV
TV
Channel yz
CBL/SAT CH
VCR
VOL
DVD
Upper channels
↑
16
13
11
7
TBS
ESPN
FOX
CBS
CNN
Current channel (highlighted)
4
↓
Lower channels
Channel label (if set)
2. Repeatedly press or hold Channel y or z while the SpeedSurf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
Adjusting the tilt correction feature
When you install the TV or change the direction of the TV, the
picture may become tilted because of the terrestrial magnetism. If so,
the following adjustment should be made for the best possible picture.
POWER
RECALL
TV/VIDEO
INFO
1
4
7
2
3
6
To adjust the tilt correction:
5
8
1. Press MENU, then press x or • until the SET UP menu
appears.
9
CHRTN
+10
2. Press y or z to highlight TILT CORRECTION.
100
0
ENT
3. Press x or • to correct any tilt of the picture (from +10 to –10.)
FAV
PIC
SI
ZE
ORITE
FAV
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
MENU
yzx •
MENU
DVDMENU
SET UP
ENTE
8
9
8
9
R
EXIT
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
FAV
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
TV / CABLE
CH PROGRAM
ADD / ERASE
CABLE
TV
CBL/SAT CH
VCR
VOL
ADD
+
7
DVD
T I LT
CORRECT ION
GU I DE
QU I CK CONNECT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s features
Adjusting the channel settings
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
POWER
RECALL
INFO
TV/VIDEO
TV/VIDEO
1
4
2
5
8
3
6
1. Select the first channel (or video mode) you want to view.
2. Select a second channel using the Channel Number buttons
(0–9, 100).
Channel
Number
9
CHRTN
7
+10
3. Press CH RTN. The previous channel will display.
100
0
ENT
CH RTN
Each time you press CH RTN, the TV will switch back and forth
between the last two channels that were selected.
FAV
PIC
SI
ZE
FAVORITE
MENU
DVDMENU
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel in the
CH RTN button, so you can return to that channel quickly from any
other channel by pressing CH RTN.
ENTE
R
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
To memorize a channel in the CH RTN button:
1. Select the channel you want to
program into the CH RTN
button.
2. Press and hold CH RTN for about
CHANNEL MEMOR I ZED
ANT
1
2 seconds until the message
“Channel Memorized” appears
(flashing) on the screen. The
CABLE
6
33 34 35
channel has been programmed into the CH RTN button
(SurfLock memory).
POWER
RECALL
TV/VIDEO
3. Continue to change channels.
INFO
4. Press CH RTN. The memorized channel will be selected.
1
4
7
2
3
6
The TV will return to the memorized channel one time only. Once
you press CH RTN and then change channels again, the SurfLock
memory will be cleared and the button will function as Channel
Return, by switching back and forth between the last two channels
that were selected.
5
8
9
CHRTN
+10
100
0
ENT
FAV
PIC
SI
ORITE
ZE
FAV
Programming your favorite channels
MENU
yzx •
MENU
DVDMENU
You can preset up to 7 of your favorite channels each for FAVORITE
CH1 and FAVORITE CH2 modes using the Favorite Channel
Programming feature. Because this feature scans through only your
favorite channels, it allows you to skip other channels you do not
normally watch.
ENTE
R
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
To program your favorite channels:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight FAVORITE CH1 or FAVORITE CH2.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
CUSTOM
8
9
8
9
8
9
8
9
T I MER
ON
T I MER
ON
00h00m
0h00m
OFF
00h00m
0h00m
OFF
10
11
12
13
14
15
16
17
18
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
10
11
12
13
14
15
16
17
18
SLEEP
CC
FAVOR I TE
SLEEP
CC
FAVOR I TE
CH1
CH1
FAVOR I TE CH2
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
CH LABEL I NG
V I
LABEL
DEO
BACKGROUND
DEO
BACKGROUND
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
(continued on next page)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
3. Press x or • to display the FAVORITE CH1 menu, for example.
• The FAV yz buttons operate as
MENU yz buttons when a menu is
on-screen.
CH INPUT will be highlighted.
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
1
2
3
4
5
6
7
• The favorite channel feature is not available
in ANT2 mode.
CUSTOM
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
CH1
CH I NPUT
FAVOR I TE CH2
0
0
0
0
0
0
0
CH LABEL I NG
V I
LABEL
DEO
BACKGROUND
TV CABLE
CLEAR ALL
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
4. Press the Channel Number buttons to enter one of your favorite
channels.
5. Press ENTER.
6. Repeat steps 4 and 5 for other channels.
To select your favorite channels:
Press FAV z or y.
POWER
RECALL
INFO
TV/VIDEO
To quickly scan through your favorite channels in a seven-picture
multi-window:
1
4
2
5
8
3
6
Press FAVORITE (see page 35).
Channel
Number
9
CHRTN
7
+10
To clear a favorite channel:
100
0
ENT
FAVORITE
1. Press MENU, and then press x or • until the CUSTOM menu
FAV
PIC
SI
ZE
appears.
FAVORITE
2. Press y or z to highlight FAVORITE CH2, for example.
MENU
MENU
DVDMENU
yzx •
3. Press x or • to display the FAVORITE CH2 menu.
ENTER
FAV yz
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
EXIT
1
2
3
4
5
6
7
1
2
3
4
5
6
7
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
CUSTOM
DVD
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
CH1
FAVOR I TE CH2
CH I NPUT
CH LABEL I NG
V I
LABEL
2
6
8
20
DEO
15
0
18
TV CABLE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
BACKGROUND
1
2
3
4
5
6
7
8
9
CLEAR ALL
4. Press yzx • to highlight the channel you want to clear, then
press ENTER.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
CH1
FAVOR I TE CH2
CH I NPUT
CH LABEL I NG
V I
LABEL
2
6
8
20
DEO
15
0
18
TV CABLE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
BACKGROUND
1
2
3
4
5
6
7
8
9
CLEAR ALL
5. Repeat step 4 for other channels.
To clear all favorite channels at once:
Press y or z to highlight CLEAR ALL in step 4 above, and then
press x or • to clear all favorite channels at once.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
12
13
14
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
CH1
FAVOR I TE CH2
CH I NPUT
15
16
CH LABEL I NG
V I
LABEL
0
0
0
0
0
0
0
DEO
BACKGROUND
17
18
TV CABLE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21
CLEAR ALL
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling channels
Channel labels appear above the on-screen channel number display
each time you turn on the TV, change a channel, or press RECALL.
You can choose any four characters to identify a channel. You can
assign labels to a maximum of 32 channels.
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
To create channel labels:
1. Press MENU, and then press x or • until the CUSTOM menu
Channel
Number
appears.
9
CHRTN
7
+10
2. Press y or z to highlight CH LABELING.
3. Press x or • to display the CH LABELING menu.
CH INPUT will be highlighted.
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
MENU
DVDMENU
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
yzx •
ENTER
EXIT
FAV
CUSTOM
ENTER
8
9
8
9
T I MER
ON
TV
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CBL/SAT CH
VCR
VOL
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
DVD
CH1
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
CH I NPUT
LABEL
CLEAR
– – – –
DEO
BACKGROUND
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
4. Press the Channel Number buttons to select a channel you want
to label.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
CH1
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
CH I NPUT
LABEL
CLEAR
6
– – – –
DEO
BACKGROUND
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
5. Press z to highlight LABEL.
6. Press x or • repeatedly to select a character for the first space,
and then press ENTER.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
00h00m
0h00m
OFF
SLEEP
CC
FAVOR I TE
12
13
14
15
16
17
18
CH1
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
CH I NPUT
LABEL
CLEAR
6
A– – –
DEO
BACKGROUND
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
7. Repeat step 6 to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose an empty space from the list of characters. Otherwise, a
dash “–” will appear in that space.
8. Repeat steps 4–7 for other channels.
To erase channel labels:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight CH LABELING.
3. Press x or • to display the CH LABELING menu.
4. Press z to highlight CH INPUT, then select the channel you
want to clear with the Channel Number buttons.
(continued on next page)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
5. Press z to highlight
POWER
RECALL
INFO
TV/VIDEO
CLEAR.
CUSTOM
6. Press x or • to erase the
8
9
8
9
T I MER
ON
10
11
12
13
14
15
16
17
18
10
11
1
4
2
5
8
3
6
00h00m
0h00m
OFF
Number
channel label.
SLEEP
CC
FAVOR I TE
12
13
14
15
16
17
18
CH1
7. Repeat steps 4–6 to erase
other channel labels.
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
CH I NPUT
LABEL
CLEAR
6
ABCD
DEO
BACKGROUND
9
CHRTN
7
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20
+10
100
0
ENT
FAV
P
IC
SIZE
PIC SIZE
Viewing the wide-screen picture formats
You can view programs that have the conventional TV picture format
(4:3 aspect ratio) and the wide-screen format (16:9 aspect ratio) in a
variety of picture sizes.
FAVORITE
MENU
DVDMENU
yzx •
ENTE
R
EXIT
FAV
Selecting the picture size
TV
CBL/SAT CH
VCR
VOL
DVD
Repeatedly press PIC SIZE to select either Natural, Theater Wide 1,
Theater Wide 2, Theater Wide 3, or Full picture size, as described
below.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
P I CTURE S I ZE
0 : NATURAL
1 :
THEATER W I DE
8
9
8
9
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
1
2
3
2 :
THEATER W I DE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
3 : THEATER W I DE
4 :
FULL
0 – 4 : TO SELECT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
While the above menu is on the screen, you can select the desired
picture size by pressing the corresponding number button.
• 480i/480p signal source : 0-4
• 1080i/720p signal source : fixed to 0 (Natural)
Receiving 480i/480p signal source
Natural
The Natural picture size displays the picture in the conventional 4:3
aspect ratio, with bars at the left and right.
Note:
If you select the Theater Wide picture mode
for conventional size programs, parts of the
picture at the top and bottom of the screen
may be hidden.
Conventional picture on a
conventional TV screen
Conventional picture in Natural size
on your wide-screen TV
Note:
Full
This mode is to enjoy the wide-screen format (16:9 aspect ratio).
If you see the Full picture size for conventional
TV picture format (4:3 aspect ratio), the
picture will be horizontally stretched.
Squeezed picture on a
conventional TV screen
Wide-screen picture in Full size on a
wide-screen TV
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Theater Wide 1
Note:
• The picture is non-uniformly enlarged—the center of the picture
remains close to its true proportion, but the left and right edges
are stretched wider to fill the screen.
You can also change the Theater Wide 1, 2, 3
using the menu system.
Select PICTURE SIZE in the THEATER menu.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
THEATER
8
9
8
9
WOW
10
11
12
13
14
15
16
17
18
SRS 3D
FOCUS
T r u B a s s
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCROLL
C I NEMA MODE
ON
ON
10
11
12
13
14
15
16
17
18
OFF
OFF
V I DEO
Conventional picture on a
conventional TV screen
Theater Wide 1
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Theater Wide 2
• The entire picture is uniformly enlarged—it is stretched the same
amount both wider and taller (retains its true proportion).
• Part of the picture at the top and bottom is hidden. To view the
hidden areas, see “Scrolling the Theater Wide picture” on page
30.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
A B C D E F G - - - - - - - - - - - - - - - -
Wide-screen picture on a
conventional TV screen
(also known as the “letter
box” format, with bar at top
and bottom)
Theater Wide 2
Theater Wide 3
• The picture is non-uniformly enlarged—it is stretched wider to
fill the width of the screen, but only slightly stretched taller.
Using the special functions to change
the size of the displayed image (i.e.
changing the height/width ratio) for the
purpose of public display or commercial
gain may infringe on copyright laws.
• A small part of the picture at the top and bottom is hidden. To
view the hidden areas (Subtitle, Caption, etc), see “Scrolling the
Theater Wide picture” on page 30.
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
Wide-screen picture on a
conventional TV screen
with subtitles
Theater Wide 3
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Scrolling the Theater Wide picture
(Theater Wide 2 and 3 only)
1. Press PIC SIZE to select the Theater Wide 2 or 3 mode.
POWER
RECALL
INFO
TV/VIDEO
2. Press MENU, and then press x or • until THEATER menu
appears.
1
4
2
5
8
3
6
3. Press y or z to highlight PICTURE SCROLL.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
9
CHRTN
7
+10
100
0
ENT
THEATER
8
9
8
9
WOW
FAV
P
IC
10
11
12
13
14
15
16
17
18
SRS 3D
FOCUS
ON
ON
OFF
10
11
12
13
14
15
16
17
18
SIZE
PIC SIZE
FAVORITE
T r u B a s s
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCROLL
C I NEMA MODE
OFF
MENU
MENU
DVDMENU
V I DEO
yzx •
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
ENTE
R
EXIT
FAV
4. Press x or • to display the Scroll Adjustment mode.
TV
CBL/SAT CH
VCR
VOL
DVD
SCROLL ADJUSTMENT
0
Note:
:
TO ADJUST
You can scroll the picture in Theater Wide 2
and Theater Wide 3 only. The scroll amounts
are as follows:
• 480i signal source:
5. Press y or z to adjust the vertical position of the picture.
Wide 1 : Not adjustable
Wide 2 : +20 to –10
Wide 3 : +20 to –10
• Normal (center) position
• 480p signal source:
Wide 1 : Not adjustable
Wide 2 : +20 to –10
Wide 3 : +20 to –10
SCROLL ADJUSTMENT
0
:
TO ADJUST
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
• To raise the picture, press y .
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
SCROLL ADJUSTMENT
+20
:
TO ADJUST
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
• To lower the picture, press z.
SCROLL ADJUSTMENT
–10
:
TO ADJUST
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the auto aspect feature
When receiving 480i signal, the TV will automatically change the
picture size by reading aspect information (ID-1 data) from the input
signal. If the signal does not include aspect information (ID-1 data),
the picture size mode you set (pages 28–29) is selected.
Note:
The autoaspect feature does not operate for
the antenna (cable) and DVI input sources.
To turn on the auto aspect:
POWER
RECALL
INFO
TV/VIDEO
1. Press MENU, and then press x or • until the THEATER menu
appears.
1
4
2
5
8
3
6
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
9
CHRTN
7
+10
THEATER
8
9
8
9
100
0
ENT
WOW
10
11
12
13
14
15
16
17
18
ON
ON
OFF
10
11
12
13
14
15
16
17
18
SRS 3D
FOCUS
FAV
P
IC SIZE
T r u B a s s
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCROLL
C I NEMA MODE
FAVORITE
OFF
V I DEO
MENU
yzx •
MENU
DVDMENU
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
ENTE
R
EXIT
2. Press y or z to highlight AUTO ASPECT, and then press x or
FAV
• to select ON.
TV
CBL/SAT CH
VCR
VOL
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
DVD
1
2
3
4
5
6
7
1
2
3
4
5
6
7
THEATER
8
9
8
9
WOW
NOTICE OF POSSIBLE ADVERSE
10
11
12
13
14
15
16
17
18
SRS 3D
FOCUS
T r u B a s s
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCROLL
C I NEMA MODE
ON
ON
10
11
12
13
14
15
16
17
18
OFF
EFFECTS ON TV PICTURE TUBE
ON
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
V I DEO
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Aspect information (ID-1 data) Picture size to be selected
4:3 Normal
16:9 Full
4:3 Letter box
Not Defined
Natural
Full
Theater Wide 2
User set mode
Selecting the cinema mode
When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) or DVI/
HDCP inputs on the TV, smoother and more natural motion can be
obtained by setting the CINEMA MODE to FILM (auto).
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
To set the CINEMA MODE to FILM (auto):
1. Press MENU, and then press x or • until the THEATER menu
9
CHRTN
7
+10
appears.
100
0
ENT
2. Press y or z to highlight CINEMA MODE.
FAV
PIC
SI
ZE
ORITE
FAV
3. Press x or • to select FILM (auto).
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
MENU
yzx •
MENU
DVDMENU
1
2
3
4
5
6
7
2
35
3
4
5
6
7
ENTE
R
THEATER
EXIT
8
9
8
9
FAV
WOW
SRS 3D
FOCUS
10
11
12
13
14
15
16
17
18
10
ON
OFF
ON OFF
11
12
13
14
15
16
17
18
TV
T r u B a s s
CBL/SAT CH
VCR
VOL
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCROLL
C I NEMA MODE
DVD
OFF
FILM / V I DEO
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
To set the CINEMA MODE to VIDEO (off):
Press x or • to select VIDEO in step 3 above.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Using the POP double-window feature
• The SPLIT buttons on the remote control
operate the TV’s POP features.
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
• You cannot access POP features when
viewing DVI input.
• You cannot display the ANT-2 signal source
in the POP window.
To display a TV broadcast in the POP window:
1. Press SPLIT to display the POP window.
• You can choose to output the sound of
either the main or POP program from the
AUDIO OUT (see “Selecting the Audio
OUT sound” on page 52).
Main window
POP window
1
4
2
5
8
3
6
POP
12
Channel
Number
9
CHRTN
7
+10
100
0
ENT
2. Select POP channels in the following two ways:
E
FAV
M
PI
E
C
S
• To change to a specific channel, press POP DIRECT CH.
While “POP” is on the screen, press the Channel Number
buttons (0-9 and 100).
IZE
VORITE
FA
MENU
DVDMENU
• To change to the next programmed channel, press
POP CH zy.
ENTE
R
EXIT
N
EXIT
C
FAV
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see “Using the V-CHIP menu” on page 37).
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH
SPLIT
POP DIRECT CH MUTE
SLEEP
TV/VCR PAUSE
STOP
PLAY
SPLIT
FREEZE SOURCE
REW
FF
SKIP/SEARCH
SOURCE
CH SCAN
REC
SWAP
POP CH
LIGHT
POP CH zy
POP
24
BLOCKED
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see “Connecting your
TV” on page 7).
2. Select the TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
or ColorStream HD2 only; you cannot select DVI in POP
mode). The current source will display in purple.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
5. You can play a tape as the POP picture, or select a channel for the
POP window using the VCR’s channel keys.
POP SOURCE SELECT I ON
0 : TV
1 : V IDEO
2 : V IDEO
3 : V IDEO
1
2
3
4 : Color Stream HD1
5 : Color Stream HD2
0 - 5 : TO SELECT
While the above menu is on the screen, you can select the desired
signal input source by pressing the corresponding number button
(0-5).
To close the POP window:
Press SPLIT again or EXIT.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the main and POP pictures
Press SWAP while you are using the POP feature to switch the main
and POP pictures.
FAV
MENU
DVDMENU
x •
Freezing the POP picture
EXIT
FAV
1. Press FREEZE while the POP is not on the screen.
The POP window will appear with a still picture.
TV
CBL/SAT CH
VCR
VOL
DVD
2. Press FREEZE again to renew the still picture.
POP DIRECT CH MUTE
SLEEP
FREEZE
SWAP
TV/VCR PAUSE
STOP
PLAY
SPLIT
FREEZE SOURCE
REW
FF
SKIP/SEARCH
CH SCAN
REC
SWAP
POP CH
LIGHT
To erase the still POP window:
Press EXIT.
Still picture
Adjusting the size of the double-window
Note:
When the input signals of the main and POP pictures are 480i, you
can adjust the size of each window. Repeatedly press x or • to change
the size (in 9 steps).
You can adjust the size of the double-window
for 480i signals only. If you try to adjust the
double-window size when viewing another
signal, the message “Not available” will
appear on the screen.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
POP double-window aspect ratio
The POP double-window feature displays each picture according to
its input signal. As illustrated below:
Note:
• The auto aspect feature (page 30) does
not operate in the double-window mode.
• Aspect ratio is the ratio of width to height
of the picture.
480i
480i
480p/720p/1080i
480i
FAV
POP
13
MENU
DVDMENU
yzx •
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
480i
480p/720p/1080i
480p/720p/1080i 480p/720p/1080i
POP DIRECT CH MUTE
SLEEP
TV/VCR PAUSE
STOP
PLAY
SPLIT
FREEZE SOURCE
CH SCAN
REW
FF
SKIP/SEARCH
CH SCAN
REC
SWAP
POP CH
LIGHT
Using the programmed channel search function
You can use the programmed channel search function to quickly scan
your programmed channels (see “Programming channels into the
channel memory ” on page 22).
1. Press CH SCAN.
The TV automatically enters POP mode, and begins a seven-
picture scan of your programmed channels.
Note:
• This feature does not operate in DVI mode.
3
4
5
6
7
• The aspect ratio of all main and POP
windows are 16:9.
8
9
10
CABLE
10
2. Press yzx • to select one of the seven pictures (becomes a
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
moving picture). The main picture is always moving.
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
Moving picture
3
4
5
6
7
8
9
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the favorite channel search function
You can use the favorite channel search function to quickly scan your
favorite channels (see “Programming your favorite channels” on page
25).
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
1. Press FAVORITE.
The TV automatically enters POP mode, and begins a seven-
picture scan of your favorite channels.
9
CHRTN
7
+10
100
0
ENT
3
4
5
6
7
FAVORITE
FAV
PIC
SI
ZE
ORITE
FAV
8
9
MENU
DVDMENU
yzx •
ENTE
R
6
CABLE
6
EXIT
FAV
ENTER
TV
2. Press yzx • to select one of the seven pictures (becomes a
CBL/SAT CH
VCR
VOL
DVD
moving picture). The main picture is always moving.
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
Moving picture
Note:
3
4
5
6
7
• This feature does not operate in DVI mode.
• The aspect ratio of all main and POP
windows are 16:9.
8
9
6
Every time you press FAVORITE, the POP window scans your
favorite channels in the following order:
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
FAVORITE CH1 — FAVORITE CH2 — Off
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
About the auto favorite feature
If your TV is in the program lock mode, after 4 seconds the TV starts
the auto favorite channel search function. See page 39 for details.
3
4
5
6
7
8
TH IS PROGRAM
HAS BEEN BLOCKED!
TV–PG
EXCEEDS SET L I M I TS
L
V
PUSH MUTE
TO ENTER PIN
CABLE
9
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LOCKS menu
Note:
The LOCKS menu includes the V-CHIP, CH LOCK, VIDEO
LOCK, and NEW PIN CODE functions. You can use these
functions after entering the correct PIN code.
The V-Chip function is available only for the
U.S. V-Chip system. The Canadian V-Chip
system is not supported.
Entering the PIN code
1. Press MENU, and then press x or • until the LOCKS menu
appears.
POWER
RECALL
INFO
TV/VIDEO
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
RECALL
Number
1
4
2
5
8
3
6
LOCKS
8
9
8
9
V–CH I P
ENABLE BLOCK I NG OFF
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
9
CHRTN
7
+10
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
100
0
ENT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
FAV
PIC
SI
ZE
FAVORITE
2. Press y or z to display the PIN code entering mode.
MENU
MENU
DVDMENU
• Blocking Reset status:
• Blocking Active Status (when the PIN
yzx •
Set your 4-digit code by pressing
the Number buttons (0–9), and
then press ENTER.
code is already stored):
ENTE
R
EXIT
Press the Number buttons (0-9) to enter
your 4-digit PIN code, and then press
ENTER.
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
BLOCK I NG RESET
LOCKS
BLOCK I NG ACT I VE
P I N CODE 1 23 4
8
9
8
9
8
9
8
9
11 10
P I N CODE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
If the wrong PIN code is entered, the message “Incorrect”
appears. Enter the code again, and then press ENTER.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press RECALL
four times within five seconds. The PIN code will be released
(Blocking Reset status restored).
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
8
9
8
9
V–CH I P
ENABLE BLOCK I NG ON/OFF
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Continue to set each item following the steps on the next page.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the V-CHIP menu
Note:
Some TV programs and movies include signals that classify the
content of the program (violence, sex, dialog, language). The V-CHIP
conrol feature in this TV detects the signals and blocks the programs
according to your selections. To use this feature, perform the
following setup.
The V-Chip function is available only for the
U.S. V-Chip system. The Canadian V-Chip
system is not supported.
ENABLE BLOCKING
1. From the LOCKS menu, select ENABLE BLOCKING.
2. Press x or • to select ON or OFF.
LOCKS menu
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
ON : To enable your setting (Lock)
8
9
8
9
V–CH I P
ENABLE BLOCK I NG ON/OFF
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
OFF: To release your setting (Unlock)
Note: The CH LOCK function is not affected by the Enable Blocking Setting.
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
OFF
OFF
OFF
V I DEO LOCK
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
TV RATING (Independent rating system for
broadcasters)
1. From the LOCKS menu, select TV RATING.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
To select each item:
Press z or y .
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
2. Press x or • to display
the TV RATING menu.
LOCKS
3. Press z or y to select an item.
4. Press • to lock (display “X” ).
Press x to unlock (display “✓ ”).
8
9
8
9
TV RAT I NG MA 14 PG
DI ALOG
LANGUAGE
G
Y
POWER
RECALL
INFO
TV/VIDEO
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
SEX
V I OLENCE
NO DLSV
YOUTH TV RAT I NG
Y7FV Y7
1
4
2
5
8
3
6
V–CH I P MENU
5. Repeat steps 3 and 4 to set
the next item.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
9
CHRTN
7
The TV age-based ratings and content themes you can lock are listed
in the table below.
+10
100
0
ENT
FAV
PIC
SI
ZE
Ratings
MA
Description and Content themes
FAVORITE
Mature Audience Only (This program is specifically
designed to be viewed by adults and therefore may be
unsuitable for children under 17.)
L) Crude or indecent language S) Explicit sexual activity
V) Graphic violence
MENU
DVDMENU
yzx •
ENTE
R
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
14
Parents Strongly Cautioned (This program contains some
material that many parents would find unsuitable for
children under 14 years of age.)
D) Intensely suggestive dialog L) Strong, coarse language
S) Intense sexual situations V) Intense violence
DVD
Press RECALL to display the rating of
the TV program you are currently
PG
Parental Guidance Suggested (This program contains
material that parents may find unsuitable for younger
children.)
watching.
D) Some suggestive dialog L) Infrequent coarse
language S) Some sexual situations V) Moderate
violence
STEREO
SAP
TV – PG
L
V
PG
L
V
G
General Audience (Most parents would find this program
suitable for all ages.)
ANT
1
FULL
CLOCK
9
: 2 5
CABLE
6
33 34 35
Y7,
Directed to Older Children (This program is designed for
Y7FV children age 7 and above. Note: Programs in which fantasy
violence may be more intense or more combative than other
programs in this category are designated Y7FV.)
Y
All Children (This program is designed to be appropriate for
all children.)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA RATING (Independent rating system for movies)
1. From the LOCKS menu, select MPAA RATING.
LOCKS menu
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
2. Press x or • to display the MPAA RATING menu, then press z
or y to highlight MPAA RATING.
LOCKS
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
8
9
1
2
3
4
5
6
7
1
2
3
4
5
6
7
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
10
11
12
13
14
15
16
17
18
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
OFF
OFF
OFF
LOCKS
8
9
8
9
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
MPAA RAT I NG
X
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
NC17 R PG13 PG
G
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
V–CH I P MENU
To select each item:
Press z or y .
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
3. Press • to lock (“X”) or press x to unlock (“✓”).
The movie ratings you can lock are described as follows:
X
: X-rated (For adults only)
NC17: Not intended for anyone 17 and under
R
: Restricted (Under 17 requires accompanying parent or adult
guardian.)
PG13 : Parents Strongly Cautioned (Some material may be
inappropriate for children under 13)
PG : Parental Guidance Suggested (Some material may not be
suitable for children)
G
: General Audience (Appropriate for all ages)
POWER
RECALL
INFO
TV/VIDEO
BLOCKING OPTION
1. From the LOCKS menu, select BLOCKING OPTION.
1
4
2
5
8
3
6
2. Press x or • to display the BLOCKING OPTION menu,
then press y or z to select an item.
9
CHRTN
7
MPAA UNRATED:
+10
100
0
ENT
Press x or • to select ON (Lock) or OFF (Unlock) for unrated
programs in the MPAA rating system.
FAV
PIC
SI
ZE
FAVORITE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
MENU
DVDMENU
1
2
3
4
5
6
7
1
2
3
4
5
6
7
yzx •
ENTE
R
LOCKS
LOCKS
EXIT
8
9
8
9
FAV
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
BLOCK I NG OPT I ON
MPAA UNRATED
TV NONE RATING
V–CH I P MENU
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
ON/OFF
OFF
TV
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
CBL/SAT CH
VCR
VOL
DVD
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
TV NONE RATING
Caution:
Setting the TV None Rating to ON may block
Press x or • to select ON (Lock) or OFF (Unlock) for programs
rated NONE in the TV PARENTAL GUIDELINES.
the broadcast of emergency information.The
menu will display the note, “Enabling this
option may block emergency messages” to
warn you of this possibility.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
8
9
8
9
BLOCK I NG OPT I ON
MPAA UNRATED
TV NONE RATING
V–CH I P MENU
NOTE : ENABL I NG TH I S
OPT I ON MAY BLOCK
EMERGENCY MESSAGES
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
ON
ON
/OFF
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
V-CHIP MENU:
Press x or • to return to the LOCKS menu.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlocking programs temporarily
If you try to watch a TV program that exceeds the rating limits you
set, the TV enters program lock mode. After 4 seconds, the TV starts
the auto favorite channel search function (see page 35). You can either
unlock the program temporarily or select a non-locked program to
watch.
After 4 seconds
3
4
5
6
7
8
THIS PROGRAM HAS BEEN BLOCKED!
TV–PG
TH IS PROGRAM
HAS BEEN BLOCKED!
L
V
EXCEEDS SET L I M I TS
TV–PG
EXCEEDS SET L I M I TS
L
V
PUSH MUTE TO ENTER PIN
PUSH MUTE
TO ENTER PIN
CABLE
9
CABLE
9
To temporarily unlock the program:
1. Press MUTE.
POWER
RECALL
INFO
TV/VIDEO
2. Press the Number buttons (0-9) to enter your 4-digit PIN code.
1
4
2
5
8
3
6
BLOCKI NG ACTI VE
Channel
Number
ENTER P I N CODE
9
CHRTN
7
TO TEMPORARI LY UN–BLOCK
+10
100
0
ENT
––––
FAV
PIC
SI
ZE
0 –9 : TO SELECT ENTER: TO SET
FAVORITE
MENU
DVDMENU
3. Press ENTER.
yzx •
ENTER
If the correct code is entered, the program lock mode is released
and the normal picture appears.
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
All locking is disabled until the TV is turned off, and will be
enabled when the TV is turned on again.
DVD
POP DIRECT CH MUTE
SLEEP
MUTE
Locking channels
With the CH LOCK feature, you can lock specific channels. You will
not be able to tune locked channels with the Channel y z buttons or
Channel Number buttons unless you clear the setting.
LOCKS menu
You can lock a maximum of nine channels.
To lock channels:
LOCKS
V–CH I P
1. From the LOCKS menu, select CH LOCK.
ENABLE BLOCK I NG ON
TV RAT I NG
MPAA RAT I NG
2. Press x or • to display the CH LOCK menu.
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
CH INPUT will be highlighted.
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
3. Press the Channel Number buttons to enter the channel you
want to lock.
To select each item:
4. Press ENTER.
Press z or y .
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
3
4
5
6
7
LOCKS
LOCKS
8
9
8
9
8
9
8
9
V–CHIP
ENABLEBLOCKING OFF
TV RAT I NG
V–CH I P
0
1
1
1
1
1
1
0
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
17
ENABLEBLOCK ING OFF
TV RATI NG
MPAARATI NG
MPAA RATI NG
BLOCK ING OPTION
3
4
5
6
7
8
BLOCK I NG OPTION
CH LOCK
VIDEO LOCK
CH INPUT
CH LOCK
CH INPUT
12
0
12
0
0
0
0
0
0
0
VIDEO LOCK
0
0
0
0
0
0
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
0
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
1
0
0
1
1
TV CABLE
TV CABLE
CLEAR ALL
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
18
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
C
20
L
21
2
E
2
23
A
24R
25 26
A
27
2
L
8
L
29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
5. Repeat steps 3 and 4 for other channels.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
To unlock individual channels:
1. From the LOCKS menu, select CH LOCK.
2. Press x or • to display the CH LOCK menu.
3. Press yzx • to highlight the channel you want to unlock, then
press ENTER.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
LOCKS
8
9
8
9
8
9
8
9
V–CHIP
ENABLEBLOCK ING ON
TV RATI NG
V–CHIP
ENABLEBLOCK ING ON
TV RATI NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
1
1
1
1
1
1
1
1
1
MPAA RAT I NG
MPAA RATI NG
BLOCK ING OPT ION
NG
BLOCK I
CH LOCK
VIDEO LOCK
OPT ION
CH INPUT
12 18 26
33
CH LOCK
VIDEO LOCK
CH INPUT
12 18 33
0
0
0
0
0
0
0
GAME TIMER
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
0
0
0
TV CABLE
0
FRONT PANEL LOCK
NEW P I N CODE
TV CABLE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
C
20
L
21
2
E
2
23
A
24R
25 26
A
27
2
L
8
2
L
9
30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19
C
20
L
21
2
E
2
23
A
24R
25 26
A
27
2
L
8
L
29 30 31 32 33 34 35
POWER
RECALL
INFO
TV/VIDEO
4. Repeat step 3 for other channels.
To unlock all locked channels at once:
Press y or z to highlight CLEAR ALL, and then press x or •.
1
4
2
5
8
3
6
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
9
CHRTN
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
+10
100
0
ENT
FAV
LOCKS
PIC SIZE
8
9
8
9
V–CHIP
FAVORITE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
ENABLEBLOCK ING ON
TV RATI NG
MPAA RAT I NG
MENU
DVDMENU
NG
BLOCK I
OPT ION
CH LOCK
VIDEO LOCK
CH INPUT
yzx •
0
0
0
0
0
0
0
0
0
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
ENTER
TV CABLE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18
C
L
E
A
R
A
L
L
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
Locking video inputs
DVD
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream
HD2, DVI/HDCP) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. From the LOCKS menu, select VIDEO LOCK.
2. Press x or • to highlight the level of video locking you want
(Video, Video+, or Off), as follows:
VIDEO : Locks VIDEO 1, VIDEO 2, VIDEO 3, ColorStream
HD1, HD2, and DVI/HDCP.
VIDEO+ : Locks VIDEO 1, VIDEO 2, VIDEO 3, ColorStream,
HD1/HD2, DVI/HDCP, and channels 3 and 4. This
option should be used if you use the antenna terminal
to play a video tape.
Note: Make sure the POP is not on channel 3 or 4.
OFF
: Unlocks all video input sources.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
8
9
8
9
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
+
V I DEO/ V I DEO / OFF
V I DEO LOCK
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
OFF
1
2
3
4
5
6
7
8
9
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the game timer
Note:
You can use the game timer to set a time limit for playing a video game
(30-120 minutes). When the game timer is activated, the TV enters
VIDEO LOCK mode and locks out the input source for the video game
device..
To deactivate the game timer, set the VIDEO
LOCK to OFF (see “Locking video inputs” on
page 39).
To set the game timer:
1. From the LOCKS menu, select GAME TIMER.
2. Press x or • to select the length of time until the video mode is
blocked from among 30, 60, 90 and 120 minutes. When the
number is highlighted, the timer will start countdown.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
LOCKS
8
9
8
9
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
OFF
V I DEO LOCK
GAME TIMER
OFF/ 30/ 60 / 90 / 120
OFF
FRONT PANEL LOCK
NEW P I N CODE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
To cancel the timer:
Select OFF in step 2 above.
TV front panel
Using the front panel lock feature
MENU TV/VIDEO VOLUME
CHANNEL
POWER
You can lock the front panel buttons to prevent your settings from
being changed accidentally (by children, for example). When the
front panel lock is in ON, all control buttons on the TV front panel
(except POWER) do not operate.
To lock the front panel:
Buttons to be locked
TV front panel
1. From the LOCKS menu, select FRONT PANEL LOCK.
2. Press x or • to highlight ON.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
MENU TV/VIDEO VOLUME
CHANNEL
1
2
3
4
5
6
7
1
2
3
4
5
6
7
W
LOCKS
8
9
8
9
V–CH I P
ENABLE BLOCK I NG
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
GAME TIMER
FRONT RANEL LOCK
NEW P I N CODE
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
OFF
ON/OFF
VOL x
1
2
3
4
5
6
7
8
9
If a button on the front panel is pressed, the message “Not
Available” appears.
POWER
RECALL
INFO
TV/VIDEO
To unlock the front panel:
Highlight OFF in step 2 above, or press and hold the VOL x
button on the TV for about 10 seconds until the message “Front
Panel Lock: Off” appears on the screen.
1
4
2
5
8
3
6
Number
9
CHRTN
7
+10
Changing the PIN code
1. From the LOCKS menu, select NEW PIN CODE.
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
2. Press the Number buttons (0–9) to enter a 4-digit code.
The numbers you enter will replace the dashes in the display.
MENU
DVDMENU
yzx •
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
ENTE
R
EXIT
FAV
ENTER
LOCKS
TV
8
9
8
9
CBL/SAT CH
VCR
VOL
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
DVD
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
V I DEO
GAME TIMER
OFF
FRONT RANEL LOCK
OFF
NEW P I N CODE 2562
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
8
9
3. Press ENTER. The new PIN code is now active.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Selecting the picture mode
Note:
If you select one of the factory-set picture
modes (SPORTS, STANDARDS, or MOVIE)
and then change a picture quality setting (for
example, increase the contrast), the picture
mode automatically changes to
You can select your desired picture type from four picture modes:
Sports, Standard, Movie, and Preference.
Mode
Picture Quality
Sports
Standard
Movie
Bright and dynamic picture (factory setting)
Standard picture setting (factory setting)
Movie-like picture setting (factory setting)
PREFERENCE in the Picture menu.
To save your new picture quality settings, you
must select SAVE NEW PREFERENCE (see
page 43) before closing the Picture menu or
the TV will return to the previous picture
mode.
Preference Your personal preference*
*(see “Saving your new preference” on page 43.)
To select the picture mode:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press z or y to select MODE.
3. Press x or • to highlight the mode you prefer.
TV front panel
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
MENU TV/VIDEO VOLUME
CHANNEL
1
2
3
4
5
6
7
1
2
3
4
5
6
7
W
P I CTURE ANTENNA
MODE
8
9
8
9
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
SPORTS / STANDARD / MOVI E / PREFERENCE
CONTRAST
BR IGHTNESS
COLOR
8 0
5 0
5 0
0
T I NT
5 0
SHARPNESS
RESET
SAVE NEW PREFERENCE
MENU
x •zy
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint, and sharpness.
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
Selection
x Pressing •
contrast
brightness
color
tint
sharpness
lower
higher
9
CHRTN
7
darker
paler
reddish
softer
lighter
+10
100
0
ENT
deeper
greenish
sharper
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
To adjust the picture quality:
1. Press MENU, and then press x or • until the PICTURE menu
ENTE
R
EXIT
appears.
FAV
2. Press z or y until the item you want to adjust is highlighted.
TV
CBL/SAT CH
VCR
VOL
DVD
3. Press x or • to adjust the level.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
P I CTURE ANTENNA
STANDARD
8
9
8
9
MODE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CONTRAST
BR IGHTNESS
COLOR
7 5
5 0
5 0
0
T I NT
5 0
SHARPNESS
RESET
SAVE
NEW
PREFERENCE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
The PICTURE qualities you adjusted can be saved in the TV’s
memory with the SAVE NEW PREFERENCE feature (see page 43).
You can keep these settings or choose factory set options, as described
under “Selecting the picture mode” above.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving your new preferences
You can save the PICTURE qualities (contrast, brightness, color, tint,
and sharpness) you adjusted in the picture preference mode.
POWER
RECALL
INFO
TV/VIDEO
To save your new preferences:
1
4
2
5
8
3
6
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight SAVE NEW PREFERENCE.
9
CHRTN
7
+10
3. Press x or •. When complete, the menu displays “DONE”.
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
P I CTURE ANTENNA
MODE
PREFERENCE
FLESH TONE
CableClear DNR
COLOR
OFF
OFF
ENTE
R
EXIT
FAV
TEMPERATURE
MEDIUM
DISPLAY FORPMRAEFTER1EN08C0E i
SAVE NEW
DONE
TV
CBL/SAT CH
VCR
VOL
DVD
The mode automatically change to PREFERENCE (see “Selecting the
picture mode” on page 42).
Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight FLESH TONE.
3. Press x or • to highlight ON.
P I CTURE ANTENNA
MODE
PREFERENCE
FLESH TONE
CableClear DNR
COLOR
ON/ OFF
OFF
TEMPERATURE
MEDIUM
1080 i
DISPLAY FORMAT
SAVE NEW PREFERENCE
Using the CableClear™ DNR feature
Note:
This feature allows you to reduce visible interference in your TV
picture. This is useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing back a video cassette or disc
damaged by repeated use.
• Cable Clear DNR is not available in DVI
mode (fixed to OFF).
• The “CableClear DNR” menu listing will
change to “DNR” in ColorStream mode.
To turn on CableClear™ DNR:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight CableClear DNR.
3. Press x or • to highlight AUTO.
P I CTURE ANTENNA
MODE
PREFERENCE
FLESH TONE
CableClear DNR
COLOR
ON
AUTO / OFF
TEMPERATURE
MEDIUM
1080 i
DISPLAY FORMAT
SAVE NEW PREFERENCE
To turn off CableClear DNR:
Highlight OFF in step 3 above.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
POWER
RECALL
INFO
TV/VIDEO
To select the color temperature:
1
4
2
5
8
3
6
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight COLOR TEMPERATURE.
9
CHRTN
7
+10
3. Press x or • to highlight the mode you prefer.
100
0
ENT
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
FAV
PIC
1
2
3
4
5
6
7
1
2
3
4
5
6
7
SI
ZE
Mode
Picture Quality
FAVORITE
cool
blueish
MENU
yzx •
MENU
DVDMENU
P I CTURE ANTENNA
PREFERENCE
8
9
8
9
medium neutral
warm reddish
MODE
10
11
12
13
14
15
16
17
18
10
11
12
13
FLESH TONE
CableClaar DNR
COLOR
ON
AUTO
ENTE
R
EXIT
TEMPERATURE
COOL /MEDIUM /WARM
1080 i
DISPLAY FORMAT
SAVE NEW PREFERENCE
FAV
14
15
16
17
18
TV
CBL/SAT CH
VCR
VOL
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
DVD
Selecting the display format (for 480p signals only)
This feature converts a 480p input signal to 540p or 1080i.
To select the display format:
Note:
• The Disply Format feature is available only
1. Press MENU, and then press x or • until the PICTURE menu
for 480P input. 1080i is always output
when a signal other than 480p is input.
appears.
2. Press y or z to highlight DISPLAY FORMAT.
• if you notice flicker in a 480p image, try
setting the Display Format to 540p.
3. Press x or • to select 540p or 1080i.
P I CTURE ANTENNA
MODE
MOVIE
FLESH TONE
CableClear DNR
COLOR
OFF
AUTO
TEMPERATURE
MEDIUM
540P/1080 i
DISPLAY FORMAT
SAVE NEW PREFERENCE
Resetting your picture adjustments
The RESET function adjusts the picture qualities you adjusted to the
following factory settings:
Contrast ................ max (100)
Brightness ............ center (50)
Color ................... center (50)
Tint ....................... center (0)
Sharpness ............. center (50)
Color temperature........... cool
CableClear DNR ........... auto
Mode ........................... sports
To reset your picture adjustments:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight RESET.
3. Press x or •. The menu displays “DONE”.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
P I CTURE ANTENNA
SPORTS
8
9
8
9
MODE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CONTRAST
BR IGHTNESS
COLOR
1 0 0
5 0
5 0
0
T I NT
5 0
SHARPNESS
RESET
SAVE NEW PREFERENCE
DONE
2
1
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the video input source
Note:
Press TV/VIDEO on the remote control or TV front panel to view a
signal from another device connected to your TV, such as a VCR or
video disc player (see illustrations below). You can select ANT 1,
VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream
HD2, DVI, or ANT 2 depending on which input jacks you used for
connecting your devices (see “Connecting your TV” on page 7).
• When ColorStream HD 1 or HD 2 is
selected, the VIDEO OUT jack does not
output a signal. To receive a video OUT
signal, use a video or S-video IN
connection instead of the ColorStream
connection.
SOURCE SELECT ION
SOURCE SELECT ION
ANT
1
0 : ANT
1 : V IDEO
2 : V IDEO
V IDEO
1
V IDEO
V IDEO
V IDEO
1
2
3
1
2
3
3 :
Col orSt ream HD1
Col orSt ream HD2
DVI
4 : Col orSt ream HD1
5 : Col orSt ream HD2
:
:
6
7
DVI
ANT
Please note the following regarding
the DVI source selection:
ANT
2
2
:
TV / V I DEO TO SELECT
0
7 : TO SELECT
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
a device to the DVI/HDCP input” on
page 13 for details.
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-7 to change)
Pressing TV/VIDEO on the TV changes
the current signal source
Labeling the video input sources
The VIDEO LABEL feature allows you to label each input source for
your TV from the following preset list of labels:
TV front panel
MENU TV/VIDEO VOLUME
CHANNEL
–
: Uses the default label name
W
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT
CBL
HD
: Satellite box
: Cable box
: DVI/HDCP device (see page 13.)
TV/VIDEO
To label the video input sources:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
POWER
RECALL
INFO
TV/VIDEO
2. Press y or z to highlight VIDEO LABEL.
TV/VIDEO
1
4
2
5
8
3
6
CUSTOM
T I MER
9
CHRTN
7
00h00m
0h00m
OFF
ON
SLEEP
CC
+10
C2
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
3. Press x or • to display the VIDEO LABEL menu.
ENTE
R
4. Press y or z to highlight the video source you want to label.
5. Press x or • to select the desired label for that input source.
EXIT
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
DVD
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
V I DEO LABEL
V I DEO1
V I DEO2
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
–
VCR/ DVD / DTV /SAT /CBL
Note:
–
–
–
–
–
V I DEO3
Color Stream HD1
Color Stream HD2
DVI
The HD (high-definition) label is available for
DVI mode only (see “Selecting the video
input source” above, and “Connecting a
device to the DVI/HDCP input” on page 13).
CUSTOM MENU
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press x or •.
7. To exit the menu, press EXIT.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the closed caption feature
The closed caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually labeled “CC”).
• Text—An on-screen display of information not related to the
current program, such as weather or stock data (when provided
by individual stations).
To view captions or text:
POWER
RECALL
INFO
TV/VIDEO
1. Tune the TV to the desired program.
2. Press MENU, and then press x or • to display CUSTOM menu.
3. Press y or z to highlight CC.
1
4
2
5
8
3
6
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
9
CHRTN
7
+10
100
0
ENT
CUSTOM
8
9
8
9
FAV
PIC
T I MER
ON
SLEEP
SI
ZE
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
0h00m
FAVORITE
CC C1 / C2 / C3 / C4 / T1 / T2 / T3 / T4 /OFF
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
MENU
yzx •
MENU
DVDMENU
V I
BACKGROUND
LABEL
DEO
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
ENTER
EXIT
FAV
4. Press x or • to highlight the desired closed caption mode, as
TV
CBL/SAT CH
VCR
VOL
follows:
DVD
• To view captions, highlight C1, C2, C3, or C4 (C1 displays
translation of the primary language in your area).
Note: If the program or video you selected is not closed captioned,
no captions will display on the screen.
Note:
A closed caption signal may not display in the
following situations:
• when a videotape has been dubbed
• when the signal reception is weak
• when the signal reception is nonstandard
Giant pandas eat leaves.
• To view text, highlight T1, T2, T3, or T4.
Note: If text is not available in your area, a black rectangle may appear on
your screen. If this happens, turn the Closed Caption feature OFF.
WORLD WEATHER
Temps
Current
Weather
Clear
F
C
LONDON
MOSCOW
PARIS
51
57
53
66
65
11
14
12
19
18
Cloudy
Clear
Cloudy
Rain
ROME
TOKYO
To turn off the Closed Caption feature:
Highlight OFF in step 4.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the ON timer
To set the ON timer to turn on the TV automatically:
POWER
RECALL
INFO
TV/VIDEO
1. Press MENU, and then press x or • until the CUSTOM menu
POWER
Number
appears.
1
4
2
5
8
3
6
2. Press y or z to highlight ON.
3. After the number position starts to blink, press the Number
buttons (0–9) to enter the length of time until the TV turns on
automatically.
9
CHRTN
7
+10
100
0
ENT
You can set the ON timer in 10 minute increments, to a
maximum of 12 hours.
FAV
PIC
SI
ZE
FAVORITE
4. Press ENTER to start the timer.
MENU
yzx •
MENU
DVDMENU
ENTER
EXIT
FAV
CUSTOM
T I MER
TV
CBL/SAT CH
VCR
VOL
10h30m
0h00m
OFF
ON
SLEEP
CC
ENTER
SLEEP
DVD
C2
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
POP DIRECT CH MUTE
SLEEP
5. Press POWER to turn off the TV.
The TV will turn on automatically after the length of time you
set in the ON timer.
Note :
Setting the sleep timer
To set the sleep timer to turn off the TV automatically:
When an instant power failure occurs, the ON
timer and sleep timer settings may be cleared.
To display the amount of time left until the TV
turns on or off automatically, press RECALL.
1. Press SLEEP to set the length of time until the TV turns off.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
8
9
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
T I MER
0 h 00m
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Every time you press the button, the time will increase in
10-minute increments to a maximum of 3 hours.
0h00m → 0h10m → 0h20m
2h50m → 3h00m → 0h00m
To cancel the sleep timer:
Press SLEEP until it is set to 0h00m.
The timer also can be set using the on-screen menu:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight SLEEP.
3. After the number position starts to blink, press the Number
buttons (0–9) to enter the length of time until the TV turns off
automatically.
4. Press ENTER to start the timer.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
T I MER
ON
SLEEP
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
2h00m
C1
CC
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
To set the clock:
Note :
1. Press MENU, and then press x or • until the SET UP menu
If the TV’s power source is interrupted (the
power cord is unplugged or a power failure
occurs), the clock must be reset.
appears.
2. Press y or z to highlight CLOCK SET.
3. After the number position starts to blink, press the Number
buttons (0–9) to enter the correct time. The clock operates on a
24-hour cycle only.
POWER
RECALL
INFO
TV/VIDEO
4. Press ENTER to start the clock.
RECALL
1
4
2
5
8
3
6
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
SET UP
9
CHRTN
7
8
9
8
9
+10
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
09 : 2 5
ANT1
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
100
0
ENT
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
FAV
PIC
ADD
0
SI
ZE
QU I C K CONNECT GU I DE
FAVORITE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
MENU
yzx •
MENU
DVDMENU
To display the time on-screen:
Press RECALL.
ENTER
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
Selecting the background of the menu display
You can change the background of the menu display by selecting from
two preset types: shaded and solid (gray).
To select the menu background:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight BACKGROUND.
3. Press x or • to select either SHADED or SOLID.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
CUSTOM
8
9
8
9
T I MER
ON
SLEEP
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
00h00m
0h00m
C 1
CC
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
SHADED / SOL I D
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Muting the sound
Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE)
the sound. While the sound is muted, the screen will display “1/2
MUTE” or “MUTE” in the lower right corner. Every time you press
MUTE, the mute mode will change in the following order.
POWER
RECALL
INFO
TV/VIDEO
RECALL
1
4
2
5
8
3
6
→ Normal → 1/2 MUTE → MUTE
9
CHRTN
7
When you select “MUTE” mode, the closed caption feature is
automatically activated (if the closed caption mode is set to OFF).
To deactivate this feature, deactivate MUTE. See “Using the closed
caption feature” on page 46 for more information.
+10
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to output to
high-fidelity stereo sound from your TV’s internal speakers. MTS also
can transmit a second audio program (SAP) containing a second
language, music, or other audio information (when provided by
individual stations).
ENTE
R
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH MUTE
SLEEP
MUTE
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed. The word “STEREO”
or “SAP” displays in yellow in the menu when the TV receives the
signal.
TV front panel
MENU TV/VIDEO VOLUME
CHANNEL
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
MENU
2. Press y or z to highlight MTS.
x •zy
3. Press x or • to highlight STEREO.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
AUDI O
8
9
8
9
MTS
BASS
STEREO / SAP / MONO
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
50
50
0
TREBLE
BALANCE
RESET
Note :
A second audio program (SAP) can be heard
only on those TV stations that offer it.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
For example, a station might broadcast music
(or another language) as a second audio
program. If you have SAP on, you will see the
current program on the screen but hear
music (or the other language) instead of the
program’s normal audio.
You can leave your TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural).
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
If you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station’s normal audio will be
output.
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight SAP. You will hear the station’s second
audio program (if available) from the speakers, while viewing the
original program’s picture (see note at right).
Occasionally no sound is output in SAP
mode. If this happens, set the MTS feature to
STEREO mode.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the WOW™ surround sound feature
POWER
RECALL
INFO
TV/VIDEO
WOW is a special combination of SRS LABS audio technologies that
creates a thrilling surround sound experience with deep, rich bass
from stereo sound sources. Your TV’s audio will sound fuller, richer
and wider.
1
4
2
5
8
3
6
To adjust the WOW feature:
9
CHRTN
7
+10
1. Select STEREO mode (See “Selecting stereo/SAP broadcasts” on
page 49).
100
0
ENT
FAV
PIC
SI
ZE
2. Press MENU, and then press x or • until the THEATER menu
FAVORITE
appears.
MENU
yzx •
MENU
DVDMENU
3. Press y or z to highlight the desired WOW feature you want to
ENTE
R
adjust, then press x or • to adjust the item.
EXIT
FAV
• SRS 3D — To turn on or off the surround sound effect.
• FOCUS — To turn on or off the vocal emphasis effect.
TV
CBL/SAT CH
VCR
VOL
DVD
• TruBass — To select your desired bass expansion level (HIGH,
LOW or OFF).
Note:
If the broadcast is monaural, the SRS 3D
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
1
2
3
4
5
6
7
effect does not work.
2
35
3
4
5
6
7
THEATER
8
9
8
9
WOW
SRS 3D
FOCUS
10
11
12
13
14
15
16
17
18
10
ON OFF
/
OFF
ON HIGH
11
12
13
14
15
16
17
18
T r u B a s s
P I CTURE S I ZE
AUTO ASPECT
P I CTURE SCROLL
C I NEMA MODE
OFF
FILM V I DEO
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Adjusting the sound quality
You can change the quality of your TV’s sound by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight the item you want to adjust.
AUDI O
MTS
STEREO / SAP / MONO
BASS
50
50
0
TREBLE
BALANCE
RESET
3. Press x or • to adjust the level.
• x makes the sound quality weaker or increases the balance in the
left channel, depending on the item selected.
• • makes the sound quality stronger or increases the balance in
the right channel, depending on the item selected.
________
SRS WOW, SRS and
symbol are trademarks of SRS Labs, Inc.
SRS WOW technology is incorporated under license from SRS Labs, Inc.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting your audio adjustments
The RESET function returns your audio adjustments to the following
factory settings:
POWER
RECALL
INFO
TV/VIDEO
Bass.................. center (50)
Treble............... center (50)
Balance ............ center (0)
1
4
2
5
8
3
6
9
CHRTN
7
To reset your audio adjustments:
+10
100
0
ENT
1. Press MENU, and then press x or • until the AUDIO menu
FAV
appears.
PIC
SI
ZE
FAVORITE
2. Press y or z to highlight RESET.
MENU
yzx •
MENU
DVDMENU
3. Press x or •. The menu displays “DONE”.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
ENTE
R
1
2
3
4
5
6
7
1
2
3
4
5
6
7
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
AUDI O
8
9
8
9
DVD
MTS
BASS
TREBLE
BALANCE
RESET
STEREO
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
50
50
0
DONE
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
Using the CYCLONE® sub-woofer system
Toshiba’s CYCLONE® ABX (Acoustic Bass eXpansion) system
provides dynamic acoustic reproduction in a self-enclosed bass-reflex
sub-woofer system.
To turn on the CYCLONE® sub-woofer system and adjust the
CYCLONE level:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight CYCLONE.
3. Press x or • to highlight ON.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
AUDI O
8
9
8
9
CYCLONE
ON/ OFF
7 0
ON
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CYC LEVEL
SPEAKERS
AUDI O OUT
MA I N
STABLE SOUND OFF
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
4. Press y or z to highlight CYC LEVEL.
Note:
If the CYCLONE level is adjusted while the
CYCLONE is set to OFF, the CYCLONE is
automatically set to ON.
5. Press x or • to adjust the CYCLONE level (sub-woofer volume).
Press • to increase the sub-woofer volume.
Press x to decrease the sub-woofer volume.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
AUDI O
8
9
8
9
CYCLONE
ON
7 0
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CYC LEVEL
SPEAKERS
AUDI O OUT
ON
MA I N
STABLE SOUND OFF
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
To turn off the CYCLONE® sub-woofer system:
Highlight OFF in step 3 above.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning off the built-in speakers
Note:
Use this feature to turn off the TV speakers when you connect an
audio system (see “Connecting an audio system” on page 14).
Make sure the volume control of your audio
amplifier is set to a moderate listening level.
To turn off the built-in speakers:
1. Press MENU, then press x or • until AUDIO menu appears.
2. Press y or z to highlight SPEAKERS.
3. Press x or • to highlight OFF.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
POWER
RECALL
INFO
TV/VIDEO
AUDI O
8
9
8
9
CYCLONE
ON
7 0
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CYC LEVEL
SPEAKERS
AUDI O OUT
ON/ OFF
MA I N
1
4
2
5
8
3
6
STABLE SOUND OFF
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
9
CHRTN
7
+10
To turn on the built-in speakers:
Highlight ON in step 3 above.
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
Selecting the AUDIO OUT sound
MENU
yzx •
MENU
DVDMENU
This feature allows you to select the sound source (MAIN or POP)
that is output from the AUDIO OUT jacks (See “Connecting two
VCRs” on page 12).
ENTE
R
EXIT
FAV
TV
This is useful when amplifying or recording the POP sound with
external equipment while hearing the sound of the main picture
through the built-in speakers.
CBL/SAT CH
VCR
VOL
DVD
To select the AUDIO OUT sound:
1. Press MENU, and then press x or • until the AUDIO menu
Note:
appears.
When the POP window is set on the screen,
the sound of the main program is output
through the AUDIO OUT jacks, even if POP is
selected in the AUDIO OUT menu.
2. Press y or z to highlight AUDIO OUT.
3. Press x or • to select MAIN or POP.
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
AUDI O
8
9
8
9
CYCLONE
ON
7 0
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CYC LEVEL
SPEAKERS
AUDI O OUT
ON
MAIN / POP
STABLE SOUND OFF
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
• MAIN: Outputs the sound of the main program through the
AUDIO OUT jacks.
• POP : Outputs the sound of the POP program through the
AUDIO OUT jacks.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the StableSound® feature
When the signal source is changed, the StableSound® feature limits
the highest volume level to prevent extreme changes in volume (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
POWER
RECALL
INFO
TV/VIDEO
RECALL
1
4
2
5
8
3
6
To turn on the StableSound® feature:
1. Press MENU, and then press x or • until the AUDIO menu
9
CHRTN
7
appears.
+10
100
0
ENT
2. Press y or z to highlight STABLE SOUND.
FAV
PIC
SI
ZE
3. Press x or • to select ON.
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
FAVORITE
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
1
2
3
4
5
6
7
MENU
yzx •
MENU
DVDMENU
ENTE
R
AUDI O
8
9
8
9
EXIT
FAV
CYCLONE
ON
7 0
ON
POP
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
CYC LEVEL
SPEAKERS
AUDI O OUT
TV
STABLE SOUND ON /OFF
CBL/SAT CH
VCR
VOL
DVD
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
To turn off the StableSound feature:
Highlight OFF in step 3 above.
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Time (if set)
• Remaining time of ON/SLEEP timer (if set)
• Channel label (if set)
• Stereo or SAP audio status
• V-CHIP rating status
• Picture size (when in ColorStream mode)
33 34 35
33 34 35
1
1
2
3
4
5
6
7
2
STEREO
SAP
TV – PG
3
4
L
V
TV – PG
ON T I MER
SLEEP T I MER
L
V
5
6
7
ON T I MER
SLEEP T I MER
11h34m
1h23m
11h34m
1h23m
8
9
8
9
10
11
12
13
14
15
16
17
18
10
11
12
13
14
15
16
17
18
ANT
1
FULL
ABCD
THEATER WI DE 1
CLOCK
DVD
ColorStream
HD1
CLOCK
9
: 2 5
CABLE
6
9 : 2 5
33 34 35
33 34 35
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the demo mode
The demo mode automatically demonstrates several of your TV’s
features.
To start the demo:
Press and hold MENU on the TV front panel for 4 seconds.
To stop the demo:
Press RECALL, EXIT, or POWER.
Understanding the auto power off feature
The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day. This feature does not work in VIDEO mode.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Television System
NTSC standard
Dimensions
Width 36-3/4 inches (935 mm)
Height 24-5/8 inches (625 mm)
Depth 23-3/4 inches (605 mm)
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Mass
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
162 lbs (73.5kg)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Supplied Accessories
Remote Control with 2 size “AA” alkaline batteries
Power Source
Optional Stand
ST34W63
120 V AC, 60 Hz
Power Consumption
150 W (average)
Design and specifications are subject to change without notice.
Audio Power
10 W + 10 W + 13 W sub-woofer
Speaker Type
Two 6 × 12 cm + one 10 cm round sub-woofer
Video/Audio Terminals
S-VIDEO INPUT
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
47 k ohm)
ColorStream® (component video) INPUT
Y : 1V(p-p), 75 ohm
PR: 0.7 V(p-p), 75 ohm
PB: 0.7 V(p-p), 75 ohm
AUDIO: 150 mV(rms), 47 k ohm
VIDEO/AUDIO OUTPUT
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
4.7 k ohm)
VARIABLE AUDIO OUTPUT
0–300 mV(rms) (30% modulation equivalent, 4.7 k ohm)
AUDIO CENTER CHANNEL INPUT
300 mV(rms) (30% modulation equivalent, 10 k ohm)
DVI/HDCP INPUT
HDCP compliant
E-EDID* 1.3 compliant
DVI-D uncompressed, high-speed, digital single-link
connection
Suggested scan rates: 1080i, 480p, 480i
_________
* E-EDID = Enhanced-Extended Display Identification
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Problem
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
• Make sure the SPEAKERS function in the AUDIO menu is set properly.
• Make sure the AUDIO CENTER CHANNEL switch is set properly.
• If the MTS feature is in SAP mode, change it to STEREO mode.
Poor picture, sound OK
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
• Make sure your other devices are connected to the TV correctly.
Poor reception of broadcast channels
Cannot receive above channel 13
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button on the remote
control is set correctly.
• Make sure the device switch on the remote control is set to the mode
that corresponds with the signal source type (cable company or outside
antenna).
Black box appears on the screen
Unable to select a certain channel
Multiple images
• The closed caption feature may be set to one of the Text modes (T1, T2,
T3, or T4). Turn closed captioning OFF.
• The channel may be locked with the CH LOCK feature, or erased with
the ADD/ERASE feature.
• The station may have broadcast difficulties. Try another channel.
• Antenna reception may be poor. Use a highly directional outdoor
antenna.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
• Check the FRONT PANEL LOCK feature.
The front panel buttons do not operate
The remote control does not operate
• Make sure the appropriate device mode on the remote control is
selected.
• Remove all obstructions between the remote control and the remote
control sensor in the TV.
• The remote control batteries may be dead. Replace the batteries.
Cannot access signal input sources
(VIDEO1, VIDEO2, VIDEO3,
ColorStream HD1/HD2, DVI/HDCP)
and/or Channels 3 and 4.
• Check the VIDEO LOCK feature.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty
for 27'' FST PURE® and All Larger Television Models
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by these warranties. Reception
problems caused by inadequate antenna systems are your
responsibility.
following limited warranties to original consumers in the United
States. THESE LIMITED WARRANTIES EXTEND TO THE
ORIGINAL CONSUMER PURCHASER OR ANY PERSON
RECEIVING THIS TELEVISION AS A GIFT FROM THE
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
television or parts that have been lost or discarded by you or
to damage to television or parts caused by misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use
in violation of instructions furnished by TACP; or to units that
have been modified or had the serial number removed,
altered, defaced, or rendered illegible.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor*
TACP warrants this television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD,
TACP WILL, AT TACP’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. TACP
Authorized Service Station personnel will come to your home
when warranty service is required. Depending on the type of
repair required, either the service will be performed in your home
or the set will be taken to the TACP Authorized Service Station
for repair and returned to your home at no cost to you.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
call toll free 1-800-631-3811 to find the nearest TACP
Authorized Service Station.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Station. Authorized TACP Service Station
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either
the service will be performed in your home or the set will be
taken to the Authorized Service Station for repair and
returned to your home at no cost to you.
Limited Two (2) Year Warranty on Picture Tube*
TACP further warrants the picture tube in this television against
defects in materials or workmanship for a period of two (2)
years after the date of original retail purchase. DURING THIS
PERIOD, TACP WILL, AT TACP’S OPTION, REPAIR OR
REPLACE A DEFECTIVE PICTURE TUBE WITH A NEW OR
REFURBISHED PICTURE TUBE WITHOUT CHARGE TO YOU,
EXCEPT THAT, IF A DEFECTIVE PICTURE TUBE IS REPAIRED
OR REPLACED AFTER ONE (1) YEAR FROM THE DATE OF
THE ORIGINAL RETAIL PURCHASE, YOU PAY LABOR
CHARGES INVOLVED IN THE REPAIR OR REPLACEMENT.
For additional information, visit TACP’s web site:
.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION
OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE
LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED,
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, GUARANTEES,
AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP
WITH RESPECT TO THE REPAIR OR REPLACEMENT OF
ANY PARTS. IN NO EVENT SHALL TACP BE LIABLE FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in
any manner whatsoever. The time within which action must be
commenced to enforce any obligation of TACP arising under this
warranty or under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you discover,
or should have discovered, the defect. This limitation does not
apply to implied warranties arising under the law of any state
of the U.S.A.
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this
television. Complete and mail the enclosed product registration
card within ten days after you, or the person who has given you
this product as a gift, purchased this television. Returning the
product registration card will enable TACP to provide you with
better customer service and improved product support. Failure
to return the product registration card will not affect your rights
under this warranty.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY
VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES
OF THE U.S.A. DO NOT ALLOW LIMITATIONS ON THE
DURATION OF AN IMPLIED WARRANTY, LIMITATIONS ON
THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT,
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TACP Service Station.
(3) The warranties from TACP are effective only if the television is
purchased and operated in the U.S.A. or Puerto Rico.
FST PURE® is a registered trademark of Toshiba America Consumer Products, L.L.C.
0104
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Canada Warranty
If you purchased your TV in Canada,
for 27'' FST PURE® and All Larger Television Models
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
problems caused by inadequate antenna systems are your
responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
television or parts that have been lost or discarded by you or
to damage to television or parts caused by misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use
in violation of instructions furnished by TCL; or to units that
have been modified or had the serial number removed,
altered, defaced, or rendered illegible.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS TELEVISION AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
Limited One (1) Year Warranty on Parts and Labor*
TCL warrants this television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR. TCL Authorized
Service Depot personnel will come to your home when warranty
service is required. Depending on the type of repair required,
either the service will be performed in your home or the set will
be taken to the TCL Authorized Service Depot for repair and
returned to your home at no cost to you. IN-HOME SERVICE
ONLY APPLIES WITHIN 100 KILOMETERS OF AN
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Depot. Authorized TCL Service Depot
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either
the service will be performed in your home or the set will be
taken to the Authorized Service Depot for repair and
returned to your home at no cost to you. IN-HOME
SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF
AN AUTHORIZED TCL SERVICE DEPOT.
AUTHORIZED TCL SERVICE DEPOT.
Limited Two (2) Year Warranty on Picture Tube*
For additional information, visit TCL’s web site:
TCL further warrants the picture tube in this television against
defects in materials or workmanship for a period of two (2) years
after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE
A DEFECTIVE PICTURE TUBE WITH A NEW OR
REFURBISHED PICTURE TUBE WITHOUT CHARGE TO YOU,
EXCEPT THAT, IF A DEFECTIVE PICTURE TUBE IS REPAIRED
OR REPLACED AFTER ONE (1) YEAR FROM THE DATE OF
THE ORIGINAL RETAIL PURCHASE, YOU PAY LABOR
CHARGES INVOLVED IN THE REPAIR OR REPLACEMENT.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
PROVINCE OF CANADA, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO
THE DURATION OF THE LIMITED WARRANTIES SET FORTH
ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS
HEREBY LIMITED, THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS, AND SIMILAR
OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR OR
REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TCL
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES.
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in
any manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof,
is hereby limited to 90 days from the date you discover, or should
have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any province of
Canada.
Owner’s Manual
Read this owner’s manual thoroughly before operating this
television.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY
VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS
ON THE DURATION OF AN IMPLIED WARRANTY, LIMITA-
TIONS ON THE TIME WITHIN WHICH AN ACTION MAY
BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES; THERE-
FORE, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY
NOT APPLY TO YOU UNDER SUCH CIRCUMSTANCES.
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if the television is
purchased in Canada from an authorized TCL dealer and
operated in Canada.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by these warranties. Reception
FST PURE® is a registered trademark of Toshiba America Consumer Products, L.L.C.
0104
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
O P
A/V cables (standard) ......................................................... 7
A/V receiver connection ...................................................14
ANT 1/2 ...................................................................................21
Antenna cables (coaxial) ................................................... 7
AUDIO OUT sound, selecting ........................................52
Audio system connection.................................................14
Auto aspect........................................................................... 31
Auto favorite ..........................................................................35
Auto power off......................................................................54
ON-timer.................................................................................47
Picture adjustments
COLOR TEMPERATURE ..............................................44
FLESH TONE ....................................................................43
Picture mode ....................................................................42
Picture quality ..................................................................42
Picture-out-picture (POP)
CH SCAN button ........................................................... 34
FREEZE button ................................................................33
POP CH zy buttons .....................................................32
POP DIRECT CH button ...............................................32
SOURCE button ..............................................................32
SPLIT button .....................................................................32
SWAP button ....................................................................33
Picture scroll..........................................................................30
Picture size selection .........................................................28
POP (also see “Picture-out-picture”) ..........................32
B
BACKGROUND selection ................................................48
Back of the TV ........................................................................ 6
C
CableClear™ DNR ...............................................................43
Cable converter box connection ..................................... 8
Camcorder connection......................................................12
CH yz buttons ....................................................................24
CH LABELING ......................................................................27
CH LOCK.................................................................................39
CH RTN button .....................................................................25
Channel Number buttons ................................................24
Channel programming
Q R
Quick connect guide..........................................................23
RECALL button ....................................................................53
Remote control
Battery installation .........................................................15
Learning about the buttons ........................................19
Programming....................................................................16
RESET .............................................................................. 44, 51
ADD/ERASE .....................................................................22
Automatic programming .............................................22
TV/CABLE selection ......................................................22
Cinema mode........................................................................31
Clock, setting ........................................................................48
Closed caption......................................................................46
Color temperature ...............................................................44
ColorStream (component) cables................................... 7
CYCLONE® sub-woofer system .....................................51
S
SAP sound............................................................................. 49
Satellite receiver connection............................................. 9
Scrolling the Theater Wide picture.............................. 30
Set-top box ............................................................................11
Size of Double-Window, adjusting ...............................33
Sleep timer .............................................................................47
Sound quality adjustments ..............................................50
SPEAKERS on/off ...............................................................52
Specifications........................................................................55
SpeedSurf mode ..................................................................24
SRS 3D surround.................................................................50
StableSound® ........................................................................53
Stereo sound .........................................................................49
SurfLock™...............................................................................25
S-video cables ........................................................................ 7
D
Demo mode ...........................................................................54
Display format...................................................................... 44
Double-window (“POP”) feature ...................................32
DTV receiver connection ..................................................11
DVD connection..............................................................9, 10
DVI cable .................................................................................. 7
DVI/HDCP connection ......................................................13
F G
FAV yz buttons ..................................................................26
FAVORITE button .................................................................35
Favorite channels, programming...................................25
FOCUS feature .................................................................... 50
Front of the TV........................................................................ 6
Front panel lock .................................................................. 41
Game timer ........................................................................... 41
T
Theater wide picture ..........................................................29
Tilt correction ........................................................................24
Troubleshooting .................................................................. 56
TruBass feature ....................................................................50
TV/VIDEO button......................................................... 25, 45
V
L M
V-CHI P
Labeling channels ...............................................................27
Labeling video inputs ........................................................45
Language selection ............................................................21
Last mode memory .............................................................54
Locking channels ................................................................39
Locking video inputs ......................................................... 40
Locks menu ...........................................................................36
Menu system.........................................................................20
MTS feature ...........................................................................49
MUTE button.........................................................................49
BLOCKING OPTION ......................................................38
ENABLE BLOCKING .....................................................37
MPAA RATING ................................................................38
NEW PIN CODE ............................................................. 41
TV RATING ........................................................................37
Unlocking programs temporarily..............................39
VCR connection ..................................................................... 7
VIDEO LABEL .......................................................................45
VIDEO LOCK .........................................................................40
W
Warranty ........................................................................... 57, 58
WOW surround sound feature .......................................50
59
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA AMERICA CONSUMER PRODUCTS, L.L.C.
HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION:1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
TOSHIBA OF CANADA LTD.
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470- 5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA – TEL: (514) 390-7766
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C., V6W 1J5, CANADA – TEL: (604) 303-2500
MANUFACTURED BY
TOSHIBA AMERICA CONSUMER PRODUCTS, L.L.C.
CYCLONE is a registered trademark of Toshiba Corporation.
ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products, L.L.C.
CableClear and SurfLock are registered trademarks of Toshiba America Consumer Products, L.L.C.
PRINTED IN USA
(04-01) RP
Download from Www.Somanuals.com. All Manuals Search And Download.
|