OWNER'S MANUAL
Color Television
TM
32A61
© 2001 TOSHIBA CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
A polarized alternating current line plug — having one blade wider
than the other. This plug will fit into the power outlet only one way. If
you are unable to insert the plug into the outlet, try reversing the plug.
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
Un enchufe de línea de corriente alterna polarizado — posee una
cuchilla más ancha que la otra. Este enchufe entrará en la toma de la
red de una sola forma. Si no puede inertar el enchufe en la toma de la
red, trate de invertirlo.
La combinación de un producto y
un carrito deberá moverse con
cuidado. Las paradas repentinas,
la fuerza excesiva, y las superficies
desiguales pondrían hacer que
volcase la combinación del carrito
y del producto.
Alternate Warnings — A three-wire grounding-type plug — a plug
having a third (grounding) pin. This plug will only fit into grounding-
type power outlet.
Advertencias alternativas — Enchufe de tippo puesta a tierra de tres
conductores — enchufe que posee un tercer terminal (de puesta a
tierra). Este enchufe solamente encajará en una toma de la red de tipo
puesta a tierra.
USE / UTILIZACIÓN
Overloading — Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity, since this can result in
fire or electric shock.
Water and Moisture — Do not use the TV set near water — for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
Sobrecarga — No sobrecargue las tomas de la red, los cables
prolongadores, ni los adaptadores para múltiples tomas, ya que esto
supondría el riesgo de incendios o de descargas eléctricas.
Agua y humedad — No utilice el televisor cerca del agua — por
ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en
un sótano húmedo, cerca de una piscina, ni lugares por el estilo.
During lightning storms, or when the TV set will be left unattended
and unused for a long period of time, unplug the power cord from the
wall outlet and disconnect the antenna or cable system. This will
prevent damage to the TV set due to lightning and power-line surges.
Ventilation — The slots and openings in the cabinet and in the back or
bottom are provided for necessary ventilation. Never block or cover
these slots and openings to ensure reliable operation of the TV set and
to protect it from overheating.
Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor
durante mucho tiempo, desenchufe el cable de alimentación de la toma
de la red y desconecte la antena o el sistema de cablevisión. Esto evitará
que se dañe el televisor debido a rayos y a sobretensiones repentinas en
la red.
Ventilación — Las ranuras y aberturas de la caja y de la parte posterior
o de la base son para proporcionar la ventilación necesaria. Para
asegurar la operación fiable del televisor para protegerlo contra el
recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.
a. Never cover the slots and openings with a cloth or other materials.
a. No cubra nunca las ranuras ni las aberturas con paños ni otros
materiales.
b. Never block the slots and openings by placing the TV set on a bed,
sofa, rug or other similar surface.
Object and Liquid Entry — Never push objects of any kind into the
TV set through the cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV set.
Entrada de objetos y líquidos — No introduzca nunca objetos de
ningún tipo en este televisor a través de las aberturas, ya que podrían
tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría
resultar en incendio o descarga eléctrica. No vierta nunca liquidos de
ningún tipo sobre este televisor.
b. No bloquee nunca las ranuras ni las aberturas colocando el televisor
sobre una cama, un sofá, una alfombra, ni demás superficies similares.
c. Never place the TV set in a confined space such as a bookcase, built-
in cabinet, or any other place of poor ventilation.
c. No coloque nunca el televisor en un espacio cubierto, como una
librería o un estante empotrados, nien un lugar de mala ventilación.
Cleaning — Unplug the TV set from the wall outlet before cleaning or
polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the TV set.
Heat — Do not place the TV set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Limpieza — Desenchufe el televisor de la toma de la red antes de
limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el
exterior del televisor, utilice un paño ligeramente humedecido en agua.
Calor — No coloque el televisor cerca ni sobre un radiador ni un
registro de calor, ni expuesto a la luz solar directa.
Power-Cord Protection — Do not allow anything to rest on or roll
over the power cord, and do not place the TV set where the power cord
is subject to wear or abuse.
Attachments — Never add accessories that have not been specifically
designed for the TV set. Never remodel the TV set by yourself as this
can result in a fire hazard or electric shock.
Protección del cable de alimentación — No coloque ni pase sobre el
cable de alimentación, ni coloque el telivisor donde su cable de
alimentación pueda sufir cualquier tipo de daños.
Aditamentos — No utilice aditamentos no recomendados por el
fabricante del televisor, ya que podrían suponer un peligro. No
remodele nunca el televisor usted mismo, ya que esto podría causar el
riesgo de incendios o descargas eléctricas.
Accessories — Do not place the TV set on an unstable cart, stand,
tripod, bracket, or table. The TV set may fall, causing serious injury to
a child or adult, and serious damage to the TV set. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the TV set, and should use a mounting accessory recom-
mended by the manufacturer.
If a snapping or popping sound from a TV set is heard continuously or
frequently while the TV set is operated, unplug the TV set and consult
your dealer or service technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly when being turned
on or off.
Accesorios — No coloque el televisor sobre un carrito, una base, un
trípode, un soporte ni una mesea inestable. El televisor podría caerse,
causando serios daños a niños o adultos, o al propio televisor. Utilice
solamente el carrito, la base, el trípode, el soporte, o la mesa que
recomiende el fabricante, o que se venda con el televisor, y utilice un
accesorio de montaje recomendado por el fabricante.
Si se oye un sonido seco de un televisor continuo o frecuente mientras
el televisor esté funcionando, desenchúfelo y consulte a su proveedor o
a un técnico de servicio. Es normal que algunos televisores produzcan
sonidos secos, particularmente cuando conecte o desconecte su
alimentación.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE / SERVICIO DE REPARACIÓN
When the TV set reaches the end of its useful life, improper disposal
could result in a picture tube implosion. Ask a qualified service
technician to dispose of the TV set.
Damage Requiring Service — Unplug the TV set from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Cuando el televisor llegue al final de su vida útil, si se deshace de él de
forma inapropiada, el tubo de imagen puede explotar. Cuando desee
deshacerse de un televisor, solicite este servicio a un técnico de
reparación especializado.
Daños que requieren el servicio de reparación — En los casos
siguientes, desenchufe el televisor de la toma de la red y solicite los
servicios de personal de reparación especializado:
a. When the power cord or plug is damaged or frayed.
a. Cuando se haya dañado el cable de alimentación o el enchufe.
b. When liquid has been spilled into the TV set.
ANTENNA / ANTENA
Outdoor Antenna Grounding — If an outdoor antenna is installed,
follow the precautions below.
b. Cuando se haya vertido líquido dentro del televisor.
c. When the TV set has been exposed to rain or water.
c. Cuando el televisor haya estado expuesto a la lluvia o al agua.
An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
d. When the TV set has been subject to excessive shock by being
dropped, or the cabinet has been damaged.
d. Cuando el televisor haya estado expuesto a golpes excesivos o haya
caído, o su caja se haya dañado.
Be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code in the USA and Section 54 of the
Canadian Electrical Code in Canada provides information with respect
to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
e. When the TV set does not operate normally even though you follow
the operating instructions. Adjust only those controls that are
specified in the operating instructions. Improper adjustment of
other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV set to normal
operation.
When the TV set exhibits a distinct change in performance. This
indicates a need for service.
Puesta a tierra de la antena exterior — Cuando instale una antena
exterior, tenga en cuenta las precauciones siguientes.
e. Cuando el televisor no funcione normalmente incluso al seguir las
instrucciones de operación. Ajuste solamente los controles indicados
en las instrucciones de operación, ya que un ajuste inadecuado de
otros controles podría resultar en daños y a menudo requerirán un
trabajo difícil por un técnico cualificado para devolver el televisor a
su funcionamiento normal.
Un sistema de antena esterior no deberá colocarse cerca de líneas de alta
tensión ni otros circuitos de iluminación o alimentación, ni donde
pueda entrar en contacto con tales líneas o circuitos.
CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,
TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE
EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O
CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR
INVARIABLEMENTE FATAL.
Cuando el funcionamiento del televisor haya cambiado
notablemente — esto indica la necesidad del servicio de reparación.
Servicing — Do not attempt to service the TV set yourself. To open or
remove the covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Cerciórese de que el sistema de antena esté puesto a tierra a fin de que
proporcione cierta protección contra sobretensiones y cargas estáticas.
La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la
Sección 54 del Código Eléctrico Canadiense ofrecen informacón con
respecto a la puesta a tierra adecuada de una unidad de descarga de
antena, el tamaño de los conductores de puesta a tierra, la ubicación de
la unidad de descarga de la antena, la conexión de los electrodos de
puesta a tierra, y los requisitos de tales electrodos.
Reparación — No intente nunca reparar el televisor por sí mismo. La
apertura o extracción de cubiertas podría exponerle a tensiones
peligrosas u otros peligros. En caso de avería solicite los servicios de
personal de reparación cualificado.
Replacement Parts — When replacement parts are required, be sure
the service technician certifies in writing that he has used replacement
parts specified by the manufacturer that have the same characteristics as
the original parts. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Reemplazo de piezas — Cuando sea necesario reemplazar piezas,
cerciórese de que el técnico de reparación utilice las piezas de reemplazo
especificadas por el fabricante u otras que posean las mismas
características que las originales. Las substituciones no autorizadas
podrían resultar en incendios, descargas eléctricas, u otros peligros.
Safety Check — Upon completion of any service or repairs to the TV
set, ask the service technician to perform routine safety checks (as
specified by the manufacturer) to determine that the TV set is in safe
operating condition, and to so certify.
Comprobación de seguridad — Al finalizar cualquier reparación de
este televisor, solicite al técnico de reparación que realice las
comprobaciones de sguridad (especificadas por el fabricante) para
determinar y certificar si el producto se encuentra en las condiciones de
operación apropiadas.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba ..............................................................................................................................7
Exploring your new TV............................................................................................................................... 7
Selecting a location for the TV .................................................................................................................... 7
Connecting your TV ...............................................................................................................................8
Connecting a VCR...................................................................................................................................... 8
Connecting a cable converter box................................................................................................................ 9
Connecting a cable converter box and a VCR ............................................................................................. 9
Connecting a DVD/satellite receiver and a VCR ....................................................................................... 10
Connecting a DVD with ColorStream™ and a VCR ............................................................................... 10
Connecting two VCRs .............................................................................................................................. 11
Connecting a camcorder ........................................................................................................................... 12
Connecting an audio amplifier .................................................................................................................. 12
Using the remote control .................................................................................................................. 13
Preparing the remote control for use ......................................................................................................... 13
Installing the remote control batteries ....................................................................................................... 13
Using the remote control with a VCR or a cable TV converter .................................................................. 13
Programming the remote control for use with a VCR or a cable TV converter .......................................... 14
VCR code table ................................................................................................................................... 15
Cable TV converter code table ............................................................................................................ 15
Location of controls .................................................................................................................................. 17
Setting up your TV .............................................................................................................................. 18
Changing the on-screen display language .................................................................................................. 18
Selecting the antenna input ....................................................................................................................... 18
Using the TV/VIDEO button ............................................................................................................. 19
Adding channels to the TV’s memory ....................................................................................................... 19
Programming channels automatically .................................................................................................. 19
Adding and erasing channels manually ................................................................................................ 20
Changing channels .................................................................................................................................... 20
Using the TV’s features...................................................................................................................... 21
Adjusting the channel settings ................................................................................................................... 21
Switching between two channels ......................................................................................................... 21
Programming your favorite channels ................................................................................................... 21
Using the V-Chip ...................................................................................................................................... 22
Selecting a PIN code ........................................................................................................................... 22
Blocking programs by ratings .............................................................................................................. 23
Blocking unrated movies or programs ................................................................................................. 26
Blocking channels ............................................................................................................................... 26
Video Lock ............................................................................................................................................... 27
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling channels ...................................................................................................................................... 28
Video Label ............................................................................................................................................... 29
Watching picture-in-picture (PIP) ............................................................................................................. 30
Switching the main and small pictures ................................................................................................ 31
Changing the position of the small picture .......................................................................................... 31
Freezing the small picture .................................................................................................................... 31
Watching multi-window PIP ..................................................................................................................... 31
Adjusting the picture ................................................................................................................................. 32
Adjusting the picture quality ............................................................................................................... 32
Selecting the color temperature ........................................................................................................... 33
Adjusting the picture preferences......................................................................................................... 33
Watching video input ................................................................................................................................ 33
Displaying on-screen information ............................................................................................................. 33
Setting the off-timer .................................................................................................................................. 34
Auto power off .......................................................................................................................................... 34
Using the closed caption feature ................................................................................................................ 34
Adjusting the sound .................................................................................................................................. 35
Muting the sound ............................................................................................................................... 35
Selecting stereo/SAP broadcasts ........................................................................................................... 35
Adjusting the sound quality................................................................................................................. 36
Using the surround sound feature ....................................................................................................... 37
Viewing the demonstration mode ............................................................................................................. 37
Understanding the last mode memory feature ........................................................................................... 37
Appendix............................................................................................................................................... 38
Cleaning and care...................................................................................................................................... 38
Troubleshooting ........................................................................................................................................ 38
Specifications ............................................................................................................................................ 39
Limited United States warranty ................................................................................................................. 40
Attention Canadian customers ............................................................................................................ 41
Index ...................................................................................................................................................... 42
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to
guide you through setting up and operating your Toshiba TV as quickly as possible. Please make sure you’ve
received the following items: TV, remote control, batteries, manual, registration card, and extended service plan
literature. If you did not receive all of the items, or any of the items are damaged or broken, please contact your
Toshiba dealer. In addition, you may need to purchase other audio or video cables to connect your equipment.
See “Connecting your TV” on page 8 for more information.
Please read all the safety and operating instructions carefully before you begin.
Instructions in this manual are based on using the Remote Control.
Exploring your new TV
You can operate your TV by using the buttons on the front panel or the remote control. The back panel provides
all the terminal connections you will need to connect other equipment to your TV.
LIGHT RECALL POWER
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
2
5
8
0
3
6
1
4
CH
MENU
TV / VIDEO
VOLUME
CHANNEL
9
7
VOL
CH RTN
ENT
POWER
100
ADV/
PIP CH
MENU
.CAPT
C
FAV
ENTER
FAV
RESET
EXIT
ADV/
PIP CH
ANT (75Ω)
STOP SOURCE
PLAY PIP
REC TV/VCR REW
FF
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
STILL LOCATE SWAP
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
CT-9946
ANT (75Ω)
AUDIO
R
AUDIO
R
AUDIO
R
Pr
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
COLOR
VIDEO
2
VIDEO
1
Y
VIDEO
SYSTEM
INPUT
L
Cr
MONO
AUDIO
L/MONO
AUDIO
S
VIDEO
AUDIO
R
Cb
R
Caution:
Selecting a location for the TV
The plug has one prong wider than the other
and will fit only one way into a standard
electrical outlet (120 volt AC, 60 Hz). If the
plug does not fit into the outlet, try turning it
around. If the plug still does not fit, the outlet
is probably non-standard and must be
replaced by a qualified electrician. Do not
tamper with the plug or try to force it
into a non-standard outlet.
• Place the TV on the floor or on a sturdy platform in a location
where light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventila-
tion. Inadequate ventilation may cause overheating, which may
damage the TV.
The model number and serial number are on the back of your TV.
Record these numbers in the spaces below. Refer to these numbers
whenever you communicate with your Toshiba dealer about this TV.
wide prong
32A61
Model number: ________________________
Serial number: ________________________
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
If you haven’t connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section. (Cables
are not supplied.)
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Audio and video cables are usually color coded according to use:
yellow for video and red and white for audio. The red audio cable
is for the stereo right channel, and the white audio cable is for the
stereo (or mono) left channel. If you look at the rear panel of the
TV, you will see that the terminals are color coded in the same
manner as the cables.
• S-video cables provide better picture performance. S-video cables
can only be used with S-video compatible components.
• ColorStreamTM cables come in sets of three and provide the best
picture performance. ColorStream cables can only be used with
ColorStream compatible components.
S-Video
Cable
ANTENNA
Coaxial Cable
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
ColorStream
Cable
AUDIO
Cable
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and to record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
Cable Lead-in from Cable Box
or Antenna
TV
ANT (75Ω)
Caution:
ANT-1
OUT
ANT-2
If using a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable. If
you have a S-VHS VCR, use the S-video
connections and remove the video cable.
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
Do not connect a regular video cable and an
S-video cable to Video-1 simultaneously.
AUDIO
R
AUDIO
R
AUDIO
R
Pr
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
From Cable
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
DEO 2 EO 1
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Pr
IN
OUT
cable converter box
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to video
mode. Tune the VCR to channel 3 or 4 (the same channel as the cable
box output switch). Use the cable convertor box to change channels.
The PIP source should be set to TV mode. (see page 24)
You will need:
• three coaxial cables
• one pair of audio cables (one single audio cable for a mono VCR)
• one video cable
• cable splitter
From Cable
Caution:
IN
cable splitter
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
OUT
OUT
cable converter box
TV
Do not connect a regular video cable and an
S-video cable to Video-1 simultaneously.
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Pr
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD/satellite receiver and a VCR
This connection allows you to watch DVD/satellite, video and TV
programs. You can record from the DVD/satellite receiver and TV, as
well as record one TV channel while watching another channel.
You will need:
• one coaxial cable
• three pairs of audio cables (two single and one pair of audio cables
for a mono VCR)
• two video cables
• one S-video cable
To Satellite
DVD / Satellite Receiver
AUDIO
OUT
L
Caution:
VIDEO
OUT
S VIDEO
You can use a video cable instead of the
S-video cable, but the picture quality will
decrease. If you use a S-video cable between
the TV and DVD/satellite receiver, make the
audio connections only and remove the video
connection.
Satellite IN
R
TV
ANT (75Ω)
Do not connect a regular video cable and an
S-video cable to Video-1 simultaneously.
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Pr
Stereo VCR
VIDO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Connecting a DVD with ColorStream™ and a VCR
This connection allows you to watch DVD, video or TV programs
and to record DVD or TV programs. You can record from one source
and watch a program from another source. Your TV is capable of using
ColorStream (color difference). Connecting your TV to a ColorStream
compatible DVD, such as a Toshiba DVD, can greatly enhance
picture quality and performance.
You will need:
• one coaxial cable
• three pairs of audio cables (two single and one pair of audio cables
for a mono VCR)
• two video cables
• one set of ColorStream video cables
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To Antenna
TM
DVD Player with ColorStream
AUDIO
OUT
L
L
VIDEO
OUT
COLORSTREAMTM
S VIDEO
R
R
Y
Pb
Pr
TV
ANT (75Ω)
ANT-1
OUT
ANT-2
Caution:
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
To play from the DVD, the DVD and TV must
use ColorStream connections. To record from
the DVD, the DVD and TV must select Video.
VIDEO
L
MONO
L/MONO
Pb
Pr
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Connecting two VCRs
This connection allows you to record from one VCR to another VCR
while watching a video program. You will also be able to record from
one TV channel while watching another channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single audio cables for mono
VCRs)
• two video cables
Caution:
Stereo VCR / Playback
Do not connect one VCR to the output and
input jacks on the TV at the same time. If you
are using a S-VHS VCR, use the S-video
connections and remove the video cable.
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Do not connect a regular video cable and an
S-video cable to Video-1 simultaneously.
TV
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
IN
VIDEO 2 VIDEO 1
VIDEO
COLOR
STREAM
Y
VIDEO
INPUT
L
L
MONO
L/MONO
Pb
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Pr
Stereo VCR / Recording
VIDO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
Caution:
If you are using a S-VHS camcorder with a
S-video output, connect this to the S-video
input on the TV and remove the video cable.
You will need:
• one pair of audio cables
• one video cable
Do not connect a regular video cable and an
S-video cable to Video-1 simultaneously.
Camcorder
VIDEO AUDIO
OUT
L
R
TV Back
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Pr
Connecting an audio amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier.
You will need one pair of audio cables.
To Cable, Cable Box
or Antenna
Audio Amplifier
AUDIO
L
R
IN
OUT
TV
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
IN
VIDEO 2 VIDEO 1
VIDEO
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Pb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Pr
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Note:
The remote control provided with your TV
may or may not operate certain features on
your VCR, cable TV converter, or other
electronic components. Refer to the owner’s
manuals provided with your other
components to see which features are
available. In addition, the other remote
controls may have buttons not available on
your TV’s remote control. If you would like to
use those features or buttons, you may need
to use the original remote controls for your
other components.
Preparing the remote control for use
The remote control will operate your TV, most VCR models, and
most cable TV converters together, even if they are different brands. If
you will be using your TV with a Toshiba VCR, your remote control
is already programmed and ready to use. If you own different brands
of VCRs and/or converters, you will need to program your remote
control (see “Programming the remote control for use with a VCR or
cable TV converter” on page 8).
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off the back of the remote control.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries
into a fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
2. Install two “AA” size batteries. Match the + and – symbols on the
batteries to the symbols on the battery compartment.
• If you do not intend to use the remote
control for a long time, remove the
batteries.
RECALL
LIGHT RECALL POWER
POWER
TV
CABLE
MUTE TV/VIDEO TIMER
VCR
TV/CABLE/VCR
switch
2
5
8
0
3
6
1
4
CH
CH (Channel)
3. Slide the battery cover back onto the remote control until the
lock snaps.
Channel
Numbers
9
7
VOL
CH RTN
ENT
100
ENT (used for the “ENTER”
command with some VCRs
and cable TV converters)
ADV/
Using the remote control with a VCR
or cable TV converter
PIP CH
MENU
.CAPT
C
FAV
ENTER
FAV
To control a Toshiba VCR:
RESET
Set the TV/CABLE/VCR switch to the VCR position. The
shaded buttons in the illustration at right will then control the
VCR. The unshaded buttons will operate the TV as usual.
EXIT
ADV/
PIP CH
STOP
PLAY
STOP SOURCE
PLAY PIP
REC TV/VCR REW
FF
To control a cable TV converter:
FAST FORWARD
REWIND
STILL LOCATE SWAP
CT-9946
Program the remote control to recognize the brand of your
converter (see “Programming the remote control for use with a
VCR or cable TV converter” on page 8). Set the TV/CABLE/
VCR switch to the CABLE position. The shaded buttons in the
top portion of the illustration at right will then control the cable
TV converter.
TV/VCR
RECORD
Note:
Some cable/TV converters may require the
ENT key to be pressed after pressing channel
numbers. (i.e. 0 – 2 – ENT)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
RECALL
POWER
Programming the remote control for use
with a VCR or cable TV converter
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
The remote control provided with your Toshiba TV is preprogrammed
to operate Toshiba VCRs also.
TV/CABLE/VCR
switch
2
5
8
0
3
6
1
4
To operate non-Toshiba components using
the remote control provided with your TV:
1. Refer to the VCR and cable TV converter code table below to
find the corresponding code for your VCR or cable TV converter
brand.
CH
CH (Channel)
Channel
Numbers
9
7
VOL
CH RTN
ENT
100
ENT (used for the “ENTER”
command with some VCRs
and cable TV converters)
ADV/
PIP CH
MENU
If more than one code is listed, try each one separately until you
find the one that works.
CAPT
.
C
FAV
ENTER
FAV
2. If you are reprogramming the remote control to operate your:
• VCR: Set the TV/CABLE/VCR switch on the remote control
to VCR.
• Cable TV converter: Set the TV/CABLE/VCR switch on the
remote control to CABLE.
3. Hold down the RECALL button while using the Channel
Number buttons to enter the three-digit code of your VCR or
cable TV converter brand.
4. Point the remote control at the VCR or converter and press
POWER to test the code.
Note:
•
When the batteries are replaced, the
remote control must be reprogrammed.
• If the VCR or converter turns on, you have entered the
correct code.
•
Some VCRs can use either of two remote
control codes. These VCRs have a switch
labeled “VCR1/VCR2.” If your VCR has this
kind of switch and does not respond to any
of the VCR codes, set the switch to the
other position (VCR1 or VCR2) and
reprogram the remote control.
• If the VCR or converter does not respond to the remote
control, you may have entered the incorrect code.
Repeat steps 1–4 using another code.
5. Reset the TV/CABLE/VCR switch to TV to control the TV.
For future reference, write down the codes you used:
VCR code _____________________
Cable TV converter code _____________________
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR code table
Brand name
Code
Brand name
Code
Brand name
Code
Adventura
Aiko
Aiwa
019
297
019
Magnavox
054, 058, 100, 129,
168
259
054, 100
Scott
062, 064, 140, 203,
229, 230, 231
054, 056, 061, 065,
066, 073, 085, 123,
124
Magnin
Marantz
Marta
Sears
Akai
060, 068, 080, 125,
261
056
American High
Asha
Audiovox
Beaumark
Bell & Howell
Brandt
054
259
056
259
123
206
Matsushita
MEI
Memorex
054
054
Sharp
067, 081
091
259
091
051, 052, 053, 054
061
Shintom
Shogun
Singer
Sony
019, 054, 056, 058,
065, 066, 067, 123,
259
MGA
062, 080
STS
Broksonic
140, 203, 230, 314,
380
MGN Technology 259
Sylvania
019, 054, 062, 100,
129
Minolta
061, 124
Calix
Canon
056
054
Mitsubishi
062, 080, 086, 094,
192, 233, 261
Symphonic
Tatung
019, 344
060
Capehart
Carver
CCE
Citizen
Colt
039
100
091, 297
056, 297
Motorola
MTC
Multitech
NAD
054, 067
019, 259
019, 091
077
Teac
019, 060
054, 181
019, 054, 056, 071
206
227, 259
Technics
Teknika
Telefunken
TMK
091
NEC
057, 059, 060, 069,
Craig
056, 066, 091, 259
054, 060, 079
259
039, 064, 297
039
019
056
056
051
019, 021, 056, 062,
080, 087, 140, 203,
227, 228, 230, 231,
297, 313, 314, 380,
498
066, 073, 085, 123
052, 054
019, 344
019, 344
054, 079, 084, 221
251, 298
037, 056, 057
019
086
056
259
054
Toshiba
062, 064, 085, 229,
231, 385
056, 259
259
064
057, 059
059, 064, 080
259
019, 054, 061, 066,
067, 081, 091, 168,
231, 259
019, 054, 091
057
Curtis Mathes
Cybernex
Daewoo
Daytron
Dynatech
Electrohome
Electrophonic
Emerex
Nikko
Noblex
Olympus
Optimus
Optonica
Orion
Totevision
Unitech
Vector
Vector Research
Video Concepts
Videosonic
Wards
056, 067, 077, 123
081
498
Panasonic
054, 096, 181, 244,
473
054, 056, 057, 059,
061, 073, 259
061, 084, 124
054
054, 081, 100, 129
056
077, 086
039
091
058
065
065
054, 096
019, 056, 344
056
056
061, 079, 084, 096,
124, 125, 168, 221
019, 054, 056, 065,
066, 067, 081, 085,
123, 259
Emerson
Penney
Pentax
Philco
Philips
Pilot
Pioneer
Portland
Protec
XR-1000
Yamaha
Zenith
052, 053, 058
Fisher
Fuji
Funai
Garrard
GE
Go Video
Goldstar
Gradiente
Cable TV converter
code table
Brand
Code
Pulsar
Quarter
Quartz
Quasar
Radio Shack
Radix
ABC
020, 022, 027, 030,
032, 033, 036, 066
041
041, 058, 172
075
075
041
041
172
Antronix
Archer
Belcor
Cable Star
Cabletenna
Cableview
Century
Harley Davidson 019
Harman/Kardon
Harwood
Headquarter
HI-Q
057, 094
087, 091
065
Randex
RCA
066
Hitachi
060, 061, 084, 124,
185, 254
060
027, 060, 086
057, 060, 086
091
054, 056
019, 227
091
Realistic
Citizen
172
Jensen
JVC
Kenwood
KLH
Kodak
Lloyd
Logik
LXI
Colour Voice
Comtronics
Contec
Dae Ryung
Eastern
Focus
Garrard
CG Electronics
044, 050
059, 079
038
027
021
419
172
075
Ricoh
053
058
064, 259
058, 067
060, 086
065, 066, 123, 259
Runco
Samsung
Sanky
Sansui
Sanyo
056
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV converter
code table (continued)
Brand name
Code
Gemini
034, 089
General Instrument 030, 295
Gold Star
Hamlin
059, 163
028, 039, 053, 278,
292
Hitachi
Hytex
Jasco
030
026
172
Jerrold
022, 030, 031, 033,
034, 066, 295
052
046
019
Macom
Magnavox
Memorex
Movietime
NSC
175
089, 175
026, 038, 267
019, 040, 126
019
044, 046, 047, 048,
049, 050, 172
042, 163, 552
Oak
Panasonic
Paragon
Philips
Pioneer
Popular Mechanics 419
Pulsar
019
RCA
040
Regal
039, 278, 292
419
021
030, 089
019
Recoton
Regency
Rembrandt
Runco
Samsung
059, 163
Scientific Atlanta 025, 027, 036, 296
Signal
034, 059
030
059
Signature
SL Marx
Sprucer
Standard
040
Components
174
Starcom
Stargate
Starquest
Sylvania
Teleview
Texscan
022, 034, 066
034, 059
034
020
059
020
Tocom
031, 032, 078
Toshiba
019
Tusa
034
Unika
041, 172
United Artists
United Cable
Universal
026
022
041, 058, 075, 096,
172, 210
Viewstar
Zenith
046, 079, 230
019
Zentek
419
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Controls
For details on the use of each control, refer to pages in parentheses.
TV front panel
TV/VIDEO (12)
VOLUME T / S
CHANNEL s/t (14)
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
T/S/t/s (14)
POWER (8, 28)
MENU (12)
Remote sensor
POWER indicator
Remote control
POWER turns the TV on and off (page 7)
TV/VIDEO selects input source (page 18)
Channel y z cycles through programmed
channels (page 13)
TV/Cable/VCR switch switches between TV,
Cable, and VCR (page 13)
RECALL
POWER
LIGHT
POWER
LIGHT RECALL
TV
TV/CABLE/VCR switch
MUTE
CABLE
VCR
MUTE TV/VIDEO TIMER
TIMER
TV/VIDEO
2
3
Channel Numbers allow direct access to channels
1
4
CH
CH (Channel)
(page 13)
5
8
0
6
Volume y z adjusts the volume level (page 17)
Channel Return returns to the last viewed channel
(page 21)
Channel Numbers
VOL (Volume)
9
7
VOL
CH RTN
ENT
100
CH RTN (Channel Return)
MENU
MENU allows access to programming menus (page 18)
Favorite Channels y z cycles through channels
programmed as favorite channels (page 21)
ADV/
PIP CH
MENU
C.CAPT
(Closed Caption)
.CAPT
C
ENTER sets programmed menu information
FAV
PIP CH
(page 13)
FAV
ENTER
FAV
EXIT exits programming menus (page 11)
PIP Buttons allow access to PIP functions (pages 24–25)
STILL freezes the small PIP
RESET
Reset
EXIT
EXIT
ADV/
PIP CH
SOURCE selects the PIP input source
PIP selects the picture-in-picture (PIP) mode
PIP CH yz changes the small PIP channel
LOCATE changes the position of the small PIP
SWAP switches the main picture and small PIP
STOP stops a videotape
STOP SOURCE
PLAY PIP
REC TV/VCR REW
FF
PIP (or VCR) Buttons
STILL LOCATE SWAP
CT-9946
REC starts recording a videotape
PLAY plays a videotape
FF fast forwards a videotape
REW rewinds a videotape
TV/VCR toggles between TV and VCR when viewing
while recording
MUTE mutes the sound (page 35)
RECALL displays on-screen information (page 27)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
POWER
LIGHT RECALL
After you’ve installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu.
You can access the menu with the buttons on your TV or by using the
remote control.
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
2
5
8
0
3
6
1
4
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to see your changes.
CH
• After fifteen seconds, the menu screen will automatically disappear if
you do not make a selection. Your changes will still be saved.
9
7
VOL
CH RTN
• When you are finished programming the menus, press EXIT.
ENT
100
ADV/
PIP CH
MENU
MENU
Changing the on-screen display language
.CAPT
C
You can choose from three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
FAV
ENTER
FAV
RESET
To select a language:
EXIT
EXIT
ADV/
PIP CH
1. Press MENU, then press x or • until the SET UP menu appears.
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
ENGLISH[FRANCAIS]
ESPANOL
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[ANT1]ANT2
ANT1/2:
ANT1/2:
[TV]CABLE
TV/CABLE:
[TV]CABLE
PROGRAMME CAN
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ADD]ERASE
[ADD]EFF
ADD/EFF:
MORE
SELECT[
]
BOUGER[
] CHOISIR[
]
2. Press y or z to highlight LANGUAGE.
3. Press x or • to highlight your desired language.
Selecting the antenna input
You can connect to two different signal sources by choosing the
antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU, then use x or • to highlight the SET UP menu.
2. Press y or z to highlight ANT 1/2.
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
ANT1/2:
[TV]CABLE
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ADD]ERASE
SELECT[
]
3. Press x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV/VIDEO
Using the TV/VIDEO button
You can monitor or change the signal source that is connected to the TV.
By pressing the TV/VIDEO button on the TV, you can select the
VIDEO 1, VIDEO 2, ColorStream, ANT 1 or ANT 2 mode. The signal
source you are currently connected to will be displayed in purple.
MENU
TV / VIDEO
VOLUME
CHANNEL
POWER
To select the antenna input:
1. Press the TV/VIDEO button on the TV. The signal source you
are connected to is displayed in purple.
TV
VIDEO 1 ANT 1
VIDEO 2 ANT 2
POWER
LIGHT RECALL
COLOR
STREAM
TV
CABLE
VCR
TO SELECT PUSH TV/VIDEO
MUTE TV/VIDEO TIMER
2. Press the button until ANT 1 or ANT 2 is displayed in purple,
indicating the antenna terminal you wish to use.
2
5
8
0
3
6
1
4
CH
Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s
channel memory when you press Channel L or M. Use the steps below
to set all active channels in your area automatically.
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
MENU
MENU
Programming channels automatically
.CAPT
C
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory, you
can erase channels or add your favorite channels. If you use both
ANT-1 and ANT-2 terminals, you must program channels for each
input source.
FAV
ENTER
FAV
RESET
EXIT
EXIT
ADV/
PIP CH
To add channels:
1. Press MENU, then press x or • to highlight the SET UP menu.
2. Press y or z until the TV/CABLE selection is highlighted.
3. Press x or • to highlight either TV or CABLE, depending on
which you use.
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
ANT1/2:
[TV]CABLE
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ADD]ERASE
SELECT[
]
If you use an antenna, choose TV. If you use cable, choose
CABLE.
4. Press z to select CH PROGRAM.
5. Press x or • to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the
channel memory.
While the TV is cycling through the channels, the message “CH
PROGRAM” appears.
6. When channel programming is complete, the message “CH
Completed (channel or cable number)” appears.
7. Press Channel L or M to view the programmed channels.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding and erasing channels manually
After you’ve programmed the channels, you can add or erase specific
channels.
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
To add or erase channels:
1. Select the channel you want to add or erase using Channel y or z. If
adding channels, you must select the channel to add by using the
Channel Number buttons.
2
5
8
0
3
6
1
4
CH
2. Press MENU, then press x or • to highlight the SET UP menu.
Channel
Numbers
3. Press y or z to highlight ADD/ERASE.
9
7
VOL
CH RTN
ENT
100
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
ADV/
PIP CH
MENU
MENU
[ENGLISH]FRANCAIS
ESPANOL
.CAPT
C
[ANT1]ANT2
ANT1/2:
[TV]CABLE
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
FAV
ENTER
FAV
[ADD]ERASE
SELECT[
]
RESET
EXIT
ADV/
PIP CH
EXIT
4. Press x or • to select ADD or ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change the channel, you can:
• change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s features
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
Adjusting the channel settings
Switching between two channels
You can switch between two channels without entering an actual
channel number each time.
2
5
8
0
3
6
1
4
CH
CH
Channel
Numbers
To switch between two channels:
9
7
1. Select the first channel you want to view.
VOL
CH RTN
2. Select a second channel with the Channel Number buttons (0-9,
100).
ENT
100
CH RTN
MENU
ADV/
PIP CH
MENU
3. Press CH RTN. The previous channel will be displayed.
.CAPT
C
Each time you press CH RTN, the TV will switch back and forth
between the two channels.
FAV
ENTER
FAV
FAV
Programming your favorite channels
RESET
You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
EXIT
ADV/
PIP CH
EXIT
You can still use Channel LM to scan through all the channels you
programmed in the TV’s memory.
To program your favorite channels:
1. Select a channel you want to program.
2. Press MENU, then press x or • to highlight the SET UP menu.
3. Press y or z to highlight FAVORITE CH.
PICTURE AUDIO
SETUP PREFER C.CAPT
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
0 MIN
DEMO:
START[STOP]
MOVE[
] START[
]
4. Press x or • to display the FAVORITE CH menu.
SET/CLEAR will be highlighted.
PICTURE AUDIO
SETUP PREFER C.CAPT
FAVORITE CH
[SET]CLEAR
2
0
0
7 14 18
0
0
0
0
0
0
[TV:CYAN, CABLE:BLUE]
SELECT[
]
SET[
]
5. Press x or • to highlight SET and press y or z.
6. Press EXIT to clear the screen.
7. Repeat steps 1 through 6 for up to 11 other channels.
To select your favorite channels:
Press the FAV CH yz buttons on the remote control to select
your favorite channels.
The FAV CH yz buttons will not work until you have pro-
grammed your favorite channels.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To clear your favorite channels:
POWER
LIGHT RECALL
1. Select a channel you want to clear.
TV
CABLE
VCR
2. Press MENU, then press x or • to highlight the SET UP menu.
3. Press y or z to highlight FAVORITE CH.
4. Press x or • to display the FAVORITE CH menu.
SET/CLEAR will be highlighted.
MUTE TV/VIDEO TIMER
2
5
8
0
3
6
1
4
CH
CH
Channel
Numbers
PICTURE AUDIO
SETUP PREFER C.CAPT
9
7
VOL
CH RTN
FAVORITE CH
ENT
100
CH RTN
MENU
[SET]CLEAR
2
0
0
7 14 18
0
0
0
0
0
0
ADV/
PIP CH
MENU
[TV:CYAN, CABLE:BLUE]
.CAPT
C
SELECT[
]
SET[
]
FAV
ENTER
FAV
FAV
5. Press the x or • to highlight CLEAR.
RESET
EXIT
ADV/
PIP CH
EXIT
PICTURE AUDIO
SETUP PREFER C.CAPT
FAVORITE CH
SET[CLEAR]
7 14 18
2
0
0
0
0
0
0
0
0
[TV:CYAN, CABLE:BLUE]
SELECT[
]
SET[
]
6. Press y or z until “0” replaces the channel number you want
to erase.
7. Press EXIT to clear the screen.
8. Repeat steps 1 through 6 for the other channels.
Using the V-Chip
You can prevent others from viewing certain programs or channels by
using the V-Chip feature.
Selecting a PIN code
Before you can block programs and channels, though, you must select
a personal identification number (PIN) code. The PIN code you
select prevents others from changing the rating limits you set.
To select your PIN code and access the V-Chip menus:
1. Press MENU, then press x or • to highlight the SET UP menu.
2. Press y or z to highlight V-CHIP CONTROL.
PICTURE AUDIO
SETUP PREFER C.CAPT
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
0 MIN
DEMO:
START[STOP]
MOVE[
] START[
]
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press x or • to display the V-CHIP menu.
PICTURE AUDIO
SETUP PREFER C.CAPT
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE_
_
_
_
SELECT [0-9]
END[EXIT]
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
Note:
PICTURE AUDIO
SETUP PREFER C.CAPT
If you forget your PIN code, press RECALL four
times within five seconds from the V-CHIP
menu. This allows you to proceed to the
BLOCKING menu and reset your PIN code.
ENABLE BLOCKING : [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
[OFF]
MOVE[
] SELECT[
]
5. You may now enable blocking — “Blocking programs by ratings”
(see below), “Blocking channels” (see page 20), “To change your
PIN code” (below) or “Blocking unrated movies or programs” (see
page 20).
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
To change your PIN code:
1. Press MENU, then press x or • to highlight the SET UP menu.
2. Press y or z to highlight V-CHIP CONTROL.
3. Press x or • to display the V-CHIP menu.
2
5
8
0
3
6
1
4
CH
Channel
Numbers
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
9
7
VOL
CH RTN
ENT
100
ADV/
5. Press y or z to highlight NEW PIN CODE and press x or • to
PIP CH
MENU
MENU
.CAPT
display the NEW PIN CODE menu.
C
6. Use the Channel Number buttons (0-9) to enter a new code. Wait
2 seconds for the BLOCKING menu to appear.
FAV
ENTER
FAV
7. Press EXIT to return to normal viewing.
RESET
EXIT
ADV/
PIP CH
EXIT
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs,
as well. The MPAA, Youth TV and TV ratings work with the V-Chip
feature and allow you to block out programming above the rating
limits you determine.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA Ratings
X
For adults only.
NC17
R
Not intended for anyone 17 or under.
Restricted. Under 17 requires an accompanying parent or
adult guardian.
PG13
PG
Parents strongly cautioned. Some material may be
inappropriate for children under 13.
Parental guidance suggested. Some material may not be
appropriate for children.
G
General audience. Appropriate for all ages.
Youth TV Ratings
Y7, Y7 FV Directed to older children. This program is designed
for children age 7 and above. For those programs where
fantasy violence may be more intense or more combative
than other programs in this category, such programs are
designated TV-Y7-FV.
Y
All children. This program is designed to be appropriate
for all children.
Note:
To see the rating of the program you are
viewing, press RECALL at any time.
TV Ratings
MA
Mature audience only. This program is specifically
designed to be viewed by adults and therefore may be
unsuitable for children under 17.
Language
Sex
Crude or indecent language.
Explicit sexual activity.
Graphic violence.
Violence
14
PG
G
Parents strongly cautioned. This program contains some
material that many parents would find unsuitable for
children under 14 years of age.
Dialog
Language
Sex
Intensely suggestive dialog.
Strong, coarse language.
Intense sexual situations.
Intense violence.
Violence
Parental guidance suggested. This program contains
material that parents may find unsuitable for younger
children.
Dialog
Language
Sex
Some suggestive dialog.
Infrequent coarse language.
Some sexual situations.
Moderate violence
Violence
General audience. Most parents would find this program
suitable for all ages.
No DLSV Programs without any Dialog, Language, Sex or Violence
ratings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the V-Chip to block programs by rating:
1. Press MENU, then press x or • to highlight the SET UP menu.
2. Press y or z to highlight V-CHIP.
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
3. Press x or • to display the V-CHIP menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
2
5
8
0
3
6
1
4
CH
Channel
Numbers
9
7
VOL
CH RTN
PICTURE AUDIO
SETUP PREFER C.CAPT
ENT
100
ADV/
PIP CH
ENABLE BLOCKING : [Y]N
SET RATING
MENU
MENU
SET BLOCKING OPTIONS
NEW PIN CODE
.CAPT
C
BLOCK CHANNEL
VIDEO LOCK
[OFF]
FAV
ENTER
FAV
MOVE[
] SELECT[
]
RESET
5. Press y or z to highlight ENABLE BLOCKING.
EXIT
ADV/
PIP CH
EXIT
• Press x or • to highlight ON to enable the V-Chip and
program blocking by rating.
• Press x or • to highlight OFF to disable the V-Chip and
program blocking by rating.
6. Press y or z to highlight SET RATING. Then, press x or • to
display the SET RATING menu.
PICTURE AUDIO
SETUP PREFER C.CAPT
PICTURE AUDIO
SETUP PREFER C.CAPT
MA 14 PG G
TV RATING
DIALOG:
MPAA RATING:
X NC17 R PG13 PG G
LANGUAGE:
SEX:
VIOLENCE:
NO DLSV:
BACK TO V-CHIP MENU
YOUTH TV RATING
Y7FV Y7
Y
TV RATING
7. Press y or z to highlight MPAA Rating, Youth TV Rating or
individual TV Ratings.
Note:
8. Press x or • to select the ratings which will be blocked. Blocked
ratings are signified by a red “X.” Unblocked ratings are signified
by a green “✔.” As you block ratings, all ratings higher than the
ones you select are blocked, as well. For example, if you choose to
block the MPAA rating R, the higher ratings, NC17 and X, are
automatically blocked, too.
Not all programs are rated. To block programs
or movies that are unrated, see “Blocking
unrated movies or programs,” page 20.
9. When you are done selecting the ratings to be blocked, press
EXIT to return to normal viewing.
When you try to view a program with a ratings block, a message will
appear listing the program’s ratings. The program can still be viewed if
you press MUTE and then enter your PIN code to temporarily bypass
the block.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Blocking unrated movies or programs
Some movies and programs are not rated. You can block these movies
and programs using the V-Chip.
To block unrated movies or programs:
1. Press MENU, then press x or • to highlight the SET UP menu.
2. Press y or z to highlight V-CHIP.
3. Press x or • to display the V-CHIP menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
5. Press y or z to select SET BLOCKING OPTIONS.
6. Press x or • to display the BLOCKING OPTION menu.
7. Press y or z to highlight MPAA UNRATED.
• Press x or • to highlight Y to block unrated movies.
• Press x or • to highlight N to unblock unrated movies.
8. Press y or z to highlight TV NONE RATING.
Note:
Blocking television programs with a rating of
“TV NONE” may block emergency messages.
• Press x or • to highlight Y to block programs with a rating of
“TV NONE.”
• Press x or • to highlight N to unblock programs with a rating
POWER
LIGHT RECALL
of “TV NONE.”
TV
9. Press EXIT to return to normal viewing.
CABLE
VCR
MUTE TV/VIDEO TIMER
Blocking channels
You can also choose to block individual channels. These channels will
not be seen regardless of the ratings of their programming. You can
choose to block up to four TV channels and four cable channels.
To block channels:
1. Use the Channel Number Buttons (0-9) to display the television
channel you wish to block.
2
5
8
0
3
6
1
4
CH
Channel
Numbers
9
7
VOL
CH RTN
ENT
100
2. Press MENU, then press x or • to highlight the SET UP menu.
ADV/
3. Press y or z to highlight V-CHIP and then press x or • to display
PIP CH
MENU
MENU
the V-CHIP menu.
.CAPT
C
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, choose a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
FAV
ENTER
FAV
RESET
EXIT
ADV/
PIP CH
EXIT
5. Press y or z to highlight BLOCK CHANNEL and then press
x or • to display the BLOCK CHANNEL menu.
PICTURE AUDIO
SETUP PREFER C.CAPT
BLOCK CHANNEL
SET[CLEAR]
0
0
0
0
SELECT[
]
SET[
]
END[EXIT]
6. Press x or •.
y or z on SET will set current channel to be blocked.
y or z on CLEAR will clear all channels from the list of blocked
channels.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Repeat steps 1 through 7 to block other channels. When you are
finished blocking channels, press EXIT to return to normal
viewing.
Note:
After programming BLOCK CHANNEL,
change channels before turning off the
television.
If you try to display a blocked channel, the TV will not display it, but
will display the nearest unblocked channel.
To unblock channels:
1. Press MENU, then press x or • to highlight the SET UP menu.
2. Press y or z to highlight V-CHIP and then press x or • to
display the V-CHIP menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, choose a
four-digit number to be your PIN code. Wait 2 seconds for the
BLOCKING menu to appear.
4. Press y or z to highlight BLOCK CHANNEL and then press
x or • to display the BLOCK CHANNEL menu.
5. Press x or • to highlight CLEAR and clear all channels from the
list of blocked channels. Press y or z.
6. Press EXIT to return to normal viewing.
Video Lock
Video locks allow the user to lock out the input sources (Video 1,
Video 2, ColorStream) and channels 3 and 4.
The possible options are listed below:
Video: This option blocks out Video 1, Video 2 and ColorStream
POWER
LIGHT RECALL
Video+: This option blocks out Video 1, Video 2, ColorStream,
channels 3 and 4
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
Off:
Disables the video lock feature
Note: In normal TV viewing, if you cannot access the input
sources (Video 1, Video 2, Video 3, ColorStream, Channel
3 or 4) please check that this feature has been disabled.
2
5
8
0
3
6
1
4
CH
To setup the video lock, follow the steps below:
Channel
Numbers
1. Press the MENU button. Press x or • to select SETUP.
2. Press y or z to select the “V-Chip Control” menu item.
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
MENU
MENU
PICTURE AUDIO
SETUP PREFER C.CAPT
.CAPT
C
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE_
_
_
_
FAV
ENTER
FAV
RESET
SELECT [0-9]
END[EXIT]
EXIT
ADV/
PIP CH
EXIT
3. Press x or • to activate the menu. At the prompt, enter the
correct pin code number to access the V-Chip control menu. See
the section on “V-Chip control” on steps for entering the pin
code number. (pag e16)
4. If the correct pin code has been entered, press y or z to select the
menu item “Video Lock.”
27
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
LIGHT RECALL
PICTURE AUDIO
SETUP PREFER C.CAPT
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
ENABLE BLOCKING : [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
VIDEO VIDEO+[OFF]
2
5
8
0
3
6
1
4
CH
MOVE[
] SELECT[
]
Channel
Numbers
5. Press x or • to select the desired level of blocking option. This
feature is independent of the “Enable blocking” option of the V-
Chip control.
9
7
VOL
CH RTN
ENT
100
6. Press the EXIT Button to exit the menu.
ADV/
PIP CH
MENU
MENU
.CAPT
C
Labeling channels
FAV
ENTER
FAV
Channel labels will appear over the channel number display each time
you turn on the TV, select a channel, or press the Recall button. You
can choose any four characters to identify the channels.
RESET
EXIT
ADV/
PIP CH
EXIT
To create channel labels:
1. Select a channel you want to label.
2. Press MENU then press x or • until the SET UP menu appears.
3. Press y or z to highlight CH LABEL.
PICTURE AUDIO
SETUP PREFER C.CAPT
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
0 MIN
DEMO:
START[STOP]
MOVE[
] START[
]
4. Press x or • to display the CH LABEL menu.
SET/CLEAR will be highlighted.
5. Press x or • to highlight SET.
PICTURE AUDIO
SETUP PREFER C.CAPT
CH LABEL
SET/CLEAR
LABEL
[SET]CLEAR
----
SET UP MENU
MOVE[
]SELECT[
]
6. Press z to highlight LABEL.
PICTURE AUDIO
SETUP PREFER C.CAPT
CH LABEL
SET/CLEAR
LABEL
[SET]CLEAR
----
SET UP MENU
MOVE[
]SELECT[
]
28
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Assign the label to the channel. Press x or • to enter a character
in the first space. Press the button repeatedly until the character
you want appears on the screen. Press ENTER.
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
8. Repeat step 7 to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose an empty space from the list of characters. Otherwise, a
dash will appear in that space.
2
5
8
0
3
6
1
4
CH
9. Press EXIT to clear the screen.
Channel
Numbers
10. Repeat steps 1 through 8 for other channels. You can assign up to
32 labels.
9
7
VOL
CH RTN
To erase channel labels:
ENT
100
1. Select a channel with a label.
ADV/
PIP CH
MENU
MENU
2. Press MENU then press x or • until the SET UP menu appears.
3. Press y or z to highlight CH LABEL.
4. Press x or • to display the CH LABEL menu.
SET/CLEAR will be highlighted.
.CAPT
C
FAV
ENTER
FAV
RESET
5. Press x or • to highlight CLEAR.
6. Press ENTER.
EXIT
ADV/
PIP CH
EXIT
7. Repeat steps 1 through 6 to erase other channel labels.
Video Label
This feature allows you to rename the input sources for your TV. The
available video label names include “-”, “VCR”, “DVD”, “DTV”,
“SAT” and “CBL” where the symbol denotes the following:
–: uses the default label name
VCR: Video Cassette Recorder
DVD: Digital Video Disc or Digital Versatile Disc
SAT: Satellite box
DTV: Digital TV Set Top Box
CBL: Cable box
To setup your own video label names, follow the steps below:
1. Press the MENU button
2. Press x or • to select the SETUP menu.
3. Press y or z to highlight the “Video label” menu item, then press
x or •.
PICTURE AUDIO
SETUP PREFER C.CAPT
VIDEO LABEL
VIDEO1 - VCR DVD DTV[SAT]CBL
VIDEO2
ColorStream
SET UP MENU
MOVE[
] SELECT[
]
4. Press y or z to select the input source. Then, press x or • to label
the input source selected.
5. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight the “SET UP MENU”
and press x or •. To exit the menu, press the EXIT button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching picture-in-picture (PIP)
POWER
LIGHT RECALL
The picture-in-picture (PIP) feature allows you to watch two pictures
at the same time. The smaller picture can be a TV broadcast or come
from an external source, such as a VCR.
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
To display a TV broadcast as a small picture:
1. Turn on the TV and select the program you want to watch.
2
5
8
0
3
6
1
4
CH
CH (Channel)
2. Press the PIP button once to display a small picture. A window
1/9 the size of the screen will appear. Press PIP a second time to
display a 1/16 size window.
9
7
VOL
CH RTN
ENT
100
1/16
1/9
ADV/
PIP CH
MENU
.CAPT
C
FAV
ENTER
FAV
PIP CH
PIP
7
RESET
EXIT
ADV/
PIP CH
3. Press PIP CH yz to choose the program you want to be dis-
SOURCE
PIP
STOP SOURCE
PLAY PIP
played as a small picture.
To display a picture from an external source as a small picture:
REC TV/VCR REW
FF
1. Make sure you have connected the external source equipment
properly. For more information, see the “Connecting your TV”
on page 2.
SWAP
STILL LOCATE SWAP
2. Turn on the TV and select the program you want to watch.
CT-9946
3. Press the PIP button once to display a small picture. A window
1/9 the size of the screen will appear. Press PIP a second time to
display a 1/16 size window.
4. Press SOURCE repeatedly to select the input source (VIDEO 1
or VIDEO 2) for the small picture. The selected source will be
displayed in purple. ColorStream cannot be selected.
PIP
TV
VIDEO 1
VIDEO 2
TO SELECT PUSH SOURCE
Note:
To turn PIP off:
PIP cannot be turned on when the
ColorStream input is being viewed.
Press PIP once or twice, depending on the size of the small
picture screen you selected.
You cannot display the signal sources input
through the ANT-2 terminal as a small picture.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the main and small pictures
POWER
LIGHT RECALL
Press SWAP while you are using the PIP feature to switch the main
and small pictures. The main and small pictures will switch each time
you press the SWAP button.
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
2
5
8
0
3
6
1
4
CH
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
MENU
.CAPT
Changing the position of the small picture
C
Press LOCATE repeatedly while you are watching a small picture.
The display position of the small picture will change in the following
order:
FAV
ENTER
FAV
PIP CH
RESET
EXIT
ADV/
PIP CH
SOURCE
PIP
STOP SOURCE
PLAY PIP
REC TV/VCR REW
FF
SWAP
STILL LOCATE SWAP
LOCATE
STILL
CT-9946
Freezing the small picture
Press STILL while you are watching a small picture. The small picture
will become a still picture. To return to the moving picture, press
STILL again.
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. You must program channels first (see page 13, Programming
channels automatically).
The TV cycles through all of the programmed channels and shows a
few seconds of each channel’s programming, then freezes the image
and moves onto the next channel in a continuous cycle. The channel
numbers appear above each PIP window. The LOCATE, SWAP, PIP
CHANNEL yz, SOURCE and STILL buttons do not work with
this PIP feature.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
To view the multi-window picture-in-picture (PIP) feature:
Press PIP a total of three times.
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
2
5
8
0
3
6
1
4
CH
14
23
27
30
43
56
9
7
VOL
CH RTN
ENT
100
To turn multi-window PIP off:
ADV/
PIP CH
MENU
Press PIP again or change the channel using the CH yz buttons.
MENU
.CAPT
C
FAV
ENTER
FAV
Adjusting the picture
RESET
Adjusting the picture quality
EXIT
EXIT
ADV/
PIP CH
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint, and sharpness. The
qualities you choose will be stored automatically in your TV’s memory
so you can recall them at any time.
To adjust the picture quality:
1. Press MENU, then press x or • to highlight the PICTURE
menu.
PICTURE AUDIO
SETUP PREFER C.CAPT
CONTRAST
–--------------|+
BRIGHTNESS –-------|-------+
SHARPNESS –-------|-------+
COLOR
–-------|-------+
TINT
–-------|-------+
RESET
SELECT[
]
2. Press y or z until the item you want to adjust is highlighted.
3. Press x or • to adjust the level.
The PICTURE items you have adjusted will be stored in the TV’s
memory automatically. You can keep these settings or choose preset
options under the PREFERENCES menu. (See “Selecting the color
temperature” and “Adjusting the picture preferences,” below and on
page 27.)
Selection
contrast
brightness
color
tint
sharpness
Pressing
lower
higher
lighter
darker
paler
deeper
greenish
sharper
reddish
softer
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
RECALL
POWER
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
To select the color temperature:
1. Press MENU, then press x or • to highlight the
PREFERENCES menu.
2
5
8
0
3
6
1
4
CH
2. Press y or z to highlight COLOR TEMPERATURE.
3. Press x or • to highlight the mode you want.
9
7
VOL
Mode
cool
Picture Quality
blueish
CH RTN
ENT
100
medium
warm
neutral
reddish
ADV/
PIP CH
MENU
MENU
.CAPT
C
FAV
Adjusting the picture preferences
ENTER
FAV
You can select your desired picture type from three preset picture
modes: Sports, Standard, and Movie.
RESET
EXIT
EXIT
ADV/
PIP CH
To select the picture preferences:
1. Press MENU, then press x or • to highlight the
PREFERENCES menu.
2. Press y or z to highlight PICTURE PREFERENCES.
3. Press x or • to highlight the mode you want.
The table below describes the effects of the different preferences.
Mode
Picture Quality
sports
standard
movie
bright and dynamic picture (factory setting)
standard picture setting
movie-like picture setting
your personal preference*
memory
*(see “Adjusting the picture quality” on page 26)
Watching video input
You can use the TV/VIDEO button on the remote control or the TV/
VIDEO button on the TV to view a signal coming from other devices,
such as VCRs or video disc players that may be connected to your TV.
(See “Connecting your TV” on page 2.)
Displaying on-screen information
Press RECALL to display the following on-screen information:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• V-Chip rating status
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the off-timer
You can set the TV so it turns off automatically.
To set the off-timer:
1. Press MENU, then press x or • to select the SET UP menu.
2. Press y or z to select the TIMER.
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
2
5
8
0
3
6
1
4
3. Press x or • to select the off time (10-180 minutes, in 10-minute
CH
increments).
4. Press EXIT to exit the menu.
To cancel the off-timer:
9
7
VOL
CH RTN
ENT
Press POWER twice, once to turn the TV off, and once to turn it
on again.
100
ADV/
PIP CH
MENU
MENU
.CAPT
C
Auto power off
FAV
ENTER
FAV
The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or if a station completes its
broadcast for the day and stops broadcasting on that channel. This
feature, however, does not work in the VIDEO mode.
RESET
EXIT
EXIT
ADV/
PIP CH
Using the closed caption feature
You have two options with the closed caption feature: captions or text.
A caption is a printed version of the dialogue, narration and/or sound
effects of a TV program. Text is information not related to the
program that appears on half of the TV screen (if available).
To view captions or text:
1. Select the desired program. Closed captioned programs are
usually marked in local TV listings as “CC.”
2. Press C.CAPT to cycle through the closed caption modes, as
described below.
PICTURE AUDIO
C.CAPT:
SETUP PREFER C.CAPT
Note:
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
A closed caption signal may not be decoded
in the following situations:
•
•
•
when a video tape has been dubbed
when the signal reception is weak
SELECT[
]
when the signal reception is non-
standard
• Select C1, C2, C3, or C4 to view captions. Select C1 for
translation of the primary language in your area.
When you choose a closed captioned channel
and the text mode, the text screen always
appears. When there is no signal, however,
the text screen will not display text characters.
The top of the mountain is covered
with snow all the year round.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
• Select T1, T2, T3, or T4 to view Text.
POWER
LIGHT RECALL
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
MUTE
WORLD WEATHER
2
5
8
0
3
6
1
4
Temps
F
Current
Weather
Clear
C
CH
LONDON
MOSCOW
PARIS
51
11
14
12
19
18
57
Cloudy
Clear
53
ROME
Cloudy
Rain
66
TOKYO
65
9
7
VOL
CH RTN
• Select OFF to turn off the closed captioned feature.
ENT
100
ADV/
PIP CH
MENU
MENU
Adjusting the sound
.CAPT
C
FAV
Muting the sound
ENTER
FAV
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display the word MUTE in the lower right-hand
corner. To restore the sound, press MUTE again.
RESET
EXIT
EXIT
ADV/
PIP CH
When you press the MUTE button, you automatically activate the
closed caption feature. To deactivate this feature, press the MUTE
button again. This feature only works when the closed caption mode is
set to off. See “Using the closed captioned feature” on page 28 for
more information.
Selecting stereo/SAP broadcasts
You can enjoy watching TV while you listen to high-fidelity stereo
sound with the Multi-channel TV Sound (MTS) feature. MTS can
also transmit a second audio program (SAP) containing a second
language or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on the screen when the TV is on, you change the
channel, or press the RECALL button.
The MTS feature is not available while in the VIDEO mode.
To listen to stereo sound:
1. Press MENU, then press x or • until the AUDIO menu appears.
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–-------|-------+
–-------|-------+
–-------|-------+
SURROUND: ON[OFF]
SELECT[
]
(Continued on next page)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press y or z to highlight MTS.
POWER
LIGHT RECALL
3. Press x or • to highlight STR.
TV
CABLE
VCR
MUTE TV/VIDEO TIMER
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
BASS
[STR]SAP MONO
2
5
8
0
3
6
1
4
–-------|-------+
–-------|-------+
–-------|-------+
TREBLE
BALANCE
SURROUND: ON[OFF]
CH
SELECT[
]
9
7
VOL
CH RTN
ENT
100
When you are watching a stereo broadcast, the word STR is
displayed in yellow. You should leave your TV set to STEREO so
you can automatically receive stereo or monaural sound, depend-
ing on the broadcast type. If the stereo sound is noisy, select
MONO to reduce the noise. The word STR or SAP is displayed
in yellow when the TV receives the signal, and in purple when
you have selected the feature.
ADV/
PIP CH
MENU
MENU
.CAPT
C
FAV
ENTER
FAV
RESET
To listen to a second audio program:
EXIT
EXIT
ADV/
PIP CH
1. Press MENU, then press x or • until the AUDIO menu appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight SAP. You will hear only the second audio
program from the left and right speakers.
Adjusting the sound quality
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, then press x or • until the AUDIO menu appears.
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–-------|-------+
–-------|-------+
–-------|-------+
SURROUND: ON[OFF]
SELECT[
]
2. Press y or z to highlight the item you want to adjust.
3. Press x or • to adjust the level.
Note:
PICTURE AUDIO
SETUP PREFER C.CAPT
To reset the audio adjustments to the factory
settings, select RESET from the PICTURE
menu.
MTS:
BASS
TREBLE
BALANCE
[STR]SAP MONO
–-------|-------+
–-------|-------+
–-------|-------+
SURROUND: ON[OFF]
SELECT[
]
• x makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance
in the left channel, depending on the item selected.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV’s speakers. The
feature uses stereo signals from a TV broadcast or video input.
To turn on the surround sound feature:
1. Select the STEREO mode following the steps under “Selecting
stereo/SAP broadcasts” on page 29.
2. Press MENU, then press x or • until the AUDIO menu appears.
3. Press y or z to highlight SURROUND.
4. Press x or • to highlight ON.
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–-------|-------+
–-------|-------+
–-------|-------+
SURROUND: ON[OFF]
SELECT[
]
To turn off the surround sound feature:
Choose OFF in step 4 above.
In general, you should leave your TV set to SURROUND so it
can automatically produce surround stereo or monaural sound,
depending on the broadcast type.
Viewing the demonstration mode
The demonstration mode (DEMO) is an option available on the
SET UP menu. If you select this mode, the TV will demonstrate
several of the TV’s features.
To stop the demonstration mode:
Select DEMO STOP in the SET UP menu, or press the
RECALL, EXIT, or POWER buttons.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV and the power
is resupplied, the last mode memory feature will turn the TV on
automatically.
If the power is going to be off for a long time or you are going to be
away from home for a long time, remove the power plug from the wall
outlet to prevent the TV from turning on in your absence.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Cleaning and care
WARNING:
TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians.
To clean the TV screen:
1. Unplug the TV to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water because water spills into the cabinet can cause
damage to the TV.
3. Wipe off any excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution:
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish
of the cabinet.
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Problem
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
Poor sound, picture OK
Poor picture, sound OK
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button is set
correctly.
Cannot receive above channel 13
• Make sure TV/CABLE is set to TV mode.
Unable to select a certain channel
or video input
• The channel may be locked out with the channel lock feature, video
lock feature, or erased with the add/erase feature.
Multiple images
• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn off the TV and
allow it to cool down for several hours before turning it on again.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
The remote control does not operate
• Check if the TV/CABLE/VCR switch is properly set.
• There may be an obstruction between the remote control and the
remote control sensor.
• The remote control batteries may be dead. Replace the batteries.
The V-Chip PIN code does not work
• Change or reset your PIN code. (See page 16, “Selecting a PIN
code.”)
Specifications
Television system
Channel coverage
NTSC standard
VHF: 2 through 13
UHF: 14 through 69
Cable TV: mid band (A-8 through A-1, A through 1)
super band (J through W)
hyper band (AA through ZZ, AAA, BBB)
ultra band (65 through 94, 100 through 125)
Power source
120 AC, 60 Hz
Power consumption
Audio power
104 W
5 W + 5 W
Speaker type
2-3/8 x 4-3/4 inches (60 x 120 mm)
Video/Audio terminals
S-VIDEO INPUT
Y-INPUT: 1 V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 kohm)
ColorStream® (component video) INPUT
Y: 1V(p-p), 75 ohm
PR (CR): 0.7 V(p-p), 75 ohm
PB (CB): 0.7 V(p-p), 75 ohm
AUDIO: 150 mV (rms) 47 kohm
VIDEO/AUDIO OUTPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 4.7 kohm)
Dimensions
Width: 30-5/8 inches (778 mm)
Height: 27-5/16 inches (693 mm)
Depth: 22-11/16 inches (575 mm)
Weight
123 lbs. (56 kg)
Supplied accessories
Optional TV stand
Remote control with two size “AA” batteries
ST3240
Design and specifications are subject to change without notice.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States warranty
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following limited warranties. These limited warranties extend
to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Limited One (1) Year Warranty
Owner’s Manual and Demographic Card
TACP and THI warrant this product and its parts against defects in
materials or workmanship for a period of one (1) year after the date of
original retail purchase. During this period, TACP and THI will repair or
replace a defective part, at their option, with a new or refurbished part,
without charge to you. TACP/THI Authorized Service Center personnel
will come to your home when warranty service is required. Depending on
the type of repair required, either the service will be performed in your
home or the set will be taken to the TACP/THI authorized service center
for repair and returned to your home at no cost to you.
You should read this owner’s manual thoroughly before operating this
product. You should complete and mail the enclosed Demographic card
within ten days after you, or the person who has given you this product as a
gift, purchased this product. This is one way to enable TACP/THI to
provide you with better customer service and improved products. Failure to
return the Demographic card will not affect your rights under this warranty.
Your Responsibility
The above warranties are subject to the following conditions;
(1) You must retain your bill of sale or provide other proof of purchase.
Limited Two (2) Year Warranty of Picture Tube
(2) All warranty servicing of this product must be made by an Authorized
TACP/THI Service Center.
TACP and THI further warrant the picture tube in this product against
defects in materials or workmanship for a period of two (2) years after the
date of original retail purchase. During this period, TACP and THI will
repair or replace a defective picture tube at their option, with a new or
refurbished picture tube, without charge to you, except that, if a defective
picture tube is replaced after one (1) year from the date of the original
retail purchase, you pay labor charges involved in the replacement.
(3) These warranties are effective only if the product is purchased and
operated in the U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems are
not covered by this warranty. Reception problems caused by
inadequate antenna systems are your responsibility.
Rental Units
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any product or parts that have
been lost or discarded by you, or to damage to products or parts
caused by misuse or accident, damage caused by Acts of God such as
lightning or fluctuations in electric power, improper installation,
improper maintenance, or use in violation of instructions furnished by
us, or to units which have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
The warranty for rental units begins with the first rental or thirty (30) days
from the date of shipment to the rental firm, whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited ninety (90) day
warranty for all parts, labor and picture tube.
How to Obtain Warranty Service
If after following all of the operating instructions in this manual and checking the “Troubleshooting” section, you find that service is needed:
(1) To find the nearest Toshiba Authorized Service Center, visit
Solutions,” or call us toll-free at 1-800-631-3811.
(2) Present your bill of sale or other proof of purchase to the Authorized Service
Center. “Authorized TACP/THI service center personnel will come to your
home when warranty service is required. Depending on the type of repair
required, either the service will be performed in your home or the TV set will
be taken to the TACP/THI authorized service center for repair and returned to
your home at no cost to you.”
In Hawaii, contact Toshiba Hawaii, Inc., Service, 327
Kamakee Street, Honolulu, HI 96814, (808) 591-9281.
For additional information, visit our web site:
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the
duration of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is
exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The
time within which action must be commenced to enforce any obligation of TACP or THI arising under this warranty or under any state or law of the
United States or any state thereof, is hereby limited to 90 days from the date you discover, or should have discovered, the defect. This limitation does not
apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on
how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages; therefore, the
above provisions may not apply to you.
REV. 03/01
40
Download from Www.Somanuals.com. All Manuals Search And Download.
ATTENTION CANADIAN CONSUMERS
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and
forward this completed form with a copy of the bill of sale to TOSHIBA OF CANADA to “Register and Validate” their
warranty.
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.
REV. 03/01
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
color temperature, adjusting...........................................33
connecting
A
adding and erasing channels manually .....................20
adding channels to the TV’s memory..........................19
adjusting
channel settings ..............................................................21
picture preferences .......................................................33
picture quality ..................................................................32
sound...................................................................................35
antenna input, selecting ...................................................18
audio amplifier, connecting.............................................12
auto power off ..................................................................... 34
audio amplifier.................................................................12
cable converter box ......................................................... 9
cable converter box and a VCR .................................. 9
camcorder .........................................................................12
DVD with ColorStream and a VCR ..........................10
DVD/satellite receiver and a VCR............................10
TV ............................................................................................ 8
VCR ........................................................................................ 8
VCRs, two ..........................................................................11
D
B
demonstration mode, viewing ........................................37
displaying on-screen information.................................33
DVD with ColorStream and a VCR, connecting ......10
DVD/satellite receiver and a VCR, connecting .......10
batteries, installing into the remote control .............13
blocking
channels .............................................................................26
programs by ratings ......................................................23
unrated movies or programs......................................26
F
favorite channels, programming ...................................21
freezing the small picture (PIP) .................................... 31
C
cable converter box and a VCR, connecting.............. 9
cable converter box, connecting..................................... 9
cable TV converter code table .......................................15
camcorder, connecting .....................................................12
care and cleaning of your TV ........................................ 38
changing
channels .............................................................................20
on-screen display language.......................................18
position of the small picture (PIP) .......................... 31
channel settings, adjusting .............................................21
channels
L
labeling channels ................................................................28
language, changing the on-screen display ..............18
last mode memory feature, understanding...............37
location for TV, selecting .................................................... 7
M
multi-window PIP ............................................................... 31
muting the sound ................................................................35
adding or erasing manually........................................20
adding to the TV's memory ........................................19
blocking with V-Chip.....................................................26
changing ............................................................................20
favorite, programming ..................................................21
labeling ...............................................................................28
programming automatically .......................................19
switching between two ................................................21
cleaning and care of your TV ........................................ 38
closed caption feature, using ........................................ 34
code table
O
off-timer, setting ................................................................. 34
on-screen display language, changing ......................18
on-screen information, displaying................................33
P
picture
adjusting ............................................................................32
color temperature, selecting ......................................33
preferences, adjusting ..................................................33
quality, adjusting.............................................................32
cable TV converter .........................................................15
VCR ......................................................................................15
42
Download from Www.Somanuals.com. All Manuals Search And Download.
picture-in-picture (PIP)
T
changing the position of the small picture ......... 31
freezing the small picture........................................... 31
main and small pictures, switching........................ 31
watching............................................................................ 30
watching multi-window .............................................. 31
PIN code, selecting.............................................................22
power, auto off..................................................................... 34
programming
channels automatically ................................................19
favorite channels ............................................................21
remote control for use with a VCR
or cable TV converter...............................................14
programs, blocking with V-Chip....................................23
troubleshooting ................................................................... 38
TV
connecting........................................................................... 8
location, selecting ............................................................ 7
setting up...........................................................................18
TV/VIDEO button, using ...................................................19
V
V-Chip
blocking channels ..........................................................26
blocking programs by ratings....................................23
selecting a PIN code .....................................................22
using ....................................................................................22
VCR and a cable converter box, connecting.............. 9
VCR and a DVD with ColorStream, connecting ......10
VCR and a DVD/satellite receiver, connecting........10
VCR, connecting .................................................................... 8
VCRs, connecting two .......................................................11
video input, watching ........................................................33
video labeling........................................................................29
video lock ...............................................................................27
R
ratings
blocking programs by ...................................................23
MPAA ..................................................................................24
TV ..........................................................................................24
unrated movies or programs......................................26
youth TV .............................................................................24
remote control
batteries, installing.........................................................13
learning about..................................................................17
preparing for use ............................................................13
programming for use with a VCR
or cable TV converter...............................................14
using ....................................................................................13
using with a VCR or cable TV converter ...............13
W
warranty .......................................................................... 40, 41
watching
multi-window picture-in-picture (PIP).................. 31
picture-in-picture (PIP) ............................................... 30
video input.........................................................................33
S
SAP, selecting .......................................................................35
satellite receiver/DVD and a VCR, connecting .......10
sound
adjusting ............................................................................35
muting .................................................................................35
stereo/SAP broadcasts, selecting ............................35
surround, using ...............................................................37
specifications ....................................................................... 39
stereo sound, selecting .....................................................35
surround sound, using ......................................................37
switching between two channels .................................21
switching the main and small pictures (PIP) .......... 31
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba America
Consumer Products, Inc.
Head Office
National Service Division
82 Totowa Road
Wayne, NJ 07470
1420B Toshiba Drive
Lebanon, TN 37087
Head Office
Toshiba Hawaii, Inc.
327 Kamakee Street
Honolulu, HI 96814
Toshiba of Canada, Ltd.
Head Office
Service Centers
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Toronto
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Tel: (905) 470-5400
Montreal
1643 North Service Road
Trans-Canada Highway
Dorval, Quebec H9P 1J1
Canada
Tel: (514) 856-4100
Vancouver
22171 Fraserwood Way
Richmond, British Columbia V6W 1J5
Tel: (604) 303-2500
Manufactured by:
Toshiba America
Consumer Products, Inc.
PRINTED IN USA
(01-06)R
23565275
Download from Www.Somanuals.com. All Manuals Search And Download.
|