2D Color Analyzer
CA-2000
CA-2000S (with standard lens)
CA-2000W (with wide lens)
CA-2000T (with telephoto lens)
CA-2000SW (with standard & wide lenses)
CA-2000ST (with standard & telephoto lenses)
CA-2000WT (with wide & telephoto lenses)
CA-2000A (with all lenses)
Easy evaluation of displays using high-resolution data !!
2D Color Analyzer for quick, accurate measurement of luminance and chromaticity distribution
Download from Www.Somanuals.com. All Manuals Search And Download.
uremeof luminance and chromaticity distribution !
matching
n of FPDs,
e CA-2000
a powerful
Indicator dial and keypad measurement examples
bject tilt
shift of the
ment.
RGB image display
Pseudocolor display
Automatic extraction of measurement spot areas to measure the
brightness and color distribution of small letters and indicators.
When the shapes of the light-emitting areas of the measurement
subject are complicated, this function extracts and measures
only the light-emitting areas.
The threshold value for extraction can be set automatically or the
luminance threshold value can be set to the desired value.
s
s
RGB image
display
Pseudocolor
display
out can be
tes.
y
solid for easier
all conditions.
Spot display
Cross-section display
The horizontal and vertical cross-sections at the cursor position
can be displayed.
Statistics for areas within the spots are displayed in a list, and
spots can be given numbers and labels. mark makes verifying
measurement position easy.
s
List display of statistical values for spot areas
Number and comment can be input for each spot area.
+ mark make checking measurement position easy.
s
s
s
Histogram display
Displays a histogram (frequency distribution) to make it easier to
observe variations in luminance and chromaticity.
nced nonuniformity
d.
ultiple exposure function
M
ced for easier
By combining different optimum exposure
times, subjects with luminance levels from low
to high in different areas can be measured.
Measurements requiring a wide dynamic range,
such as a gray scale, can be measured.
ser calibration for each color region
UWhen simultaneously measuring LEDs with different colors, for example, by calibrating for each color, high-
accuracy measurements can be performed.
Download from Www.Somanuals.com. All Manuals Search And Download.
of luminance and chromaticity distribution !
ensor with XYZ filters offers high
correlation to the sensitivity of the
human eye
The instrument features a sensor with XYZ filters to
offer spectral response that correlates closely with the
CIE1931 color-matching functions, instead of the RGB
color-separation filters used in digital cameras or color
CCD cameras. This ensures luminance/chromaticity
measurements that correlate well with evaluation by
human eyes.
igh-resolution one-million-pixel
CCD
S
H
Enables accurate measurements of even small areas.
asy operation with included
software
E
ther functions
O
nterchangeable lenses for
measurements of various objects
The instrument can be used for various applications by
selecting the optimum lens from standard, wide-angle
and telephoto lenses (plus two types of macro rings for
telephoto lens) according to the size of the object.
s 3YNCHRONIZED MEASUREMENT IS AVAILABLE BY NUMERICAL
input of the sync frequency for the subject display
device. (Settable range: 4 to 2,000 Hz)
I
s )NTEGRATION OF A MAXIMUM OF ꢀꢁꢂ MEASUREMENTS
ensures accurate measurements of even low
luminance.
s 5SER CALIBRATION FOR LUMINANCE AND CHROMATICITYꢃ
s "ACKLIGHT CANCEL FUNCTION COMPENSATES FOR THE EFFECT
of backlight variations when performing evaluation.
ndividual lens calibration using
multiple focal points
I
Each lens is individually calibrated for the sensitivity
fluctuations caused by sensors, optical filters and
the lens itself, using multiple focal points. Accurate
measurement of luminance and chromaticity
distribution can be started immediately after purchase.
n
re
g
e
h
i
s
e
w
t d
n
h
a
g
p
i
e
u
w
e
t
h
s
g
!
i
s
t & l
s ea
c
e
a
y
p
b
m
n
o
C
e
t
y
l
a
Model with standard lens
Standard
Lens hood for standard/
telephoto lenses
Model with wide lens
Wide
Wide lens
Lens hood for
wide lens
Model with telephoto lens
Macro 1 Macro 2
Telephoto
Macro rings
Main unit
Lens hood for macro
measurement
Lens hood for standard/
telephoto lenses
Telephoto lens
Download from Www.Somanuals.com. All Manuals Search And Download.
m
e
t
s
System Configuration
Sy
Standard accessories
Optional accessories
Lens Hood
(For standard/telephoto lens)
CA-A68
Standard Lens
CA-A72
Hood Cap
CA-A71
Mount Cover
CA-A61
Standard
Data Management
Software
CA-2000
Main Unit
D
CA-S20w
Personal computer
(commercial product)
Lens Hood
(For wide lens)
CA-A69
Hood Cap
(For wide lens)
CA-A75
Wide
USB cable
IF-A18 (3 m)
Wide Lens
CA-A73
J
Pan Head
CS-A4
Lens Hood
Telephoto Macro 1 Macro 2
AC Adapter
Hood Cap
CA-A71
(For standard/telephoto lens)
CA-A68
Tripod
CS-A3
Soft Case
CA-A60
Telephoto Lens
CA-A74
8
Low-magnification
Macro1
Lens Hood
(For macro measurement)
CA-A70
High-magnification
Macro2
D
J
8
2D Color Analyzer (with standard lens)
2D Color Analyzer (with wide lens)
2D Color Analyzer (with telephoto lens)
CA-2000S
CA-2000W
CA-2000T
Components other than those shown in the areas
shaded are common for all packages.
Combination of D and J (with standard and wide lenses)
Combination of D and 8 (with standard and telephoto lenses)
Combination of J and 8 (with wide and telephoto lenses)
Combination of D,J and 8 (with all lenses)
CA-2000SW
CA-2000ST
CA-2000WT
CA-2000A
* Each lens comes with a lens cap, mount cap, and calibration data DVD.
Measurable object size with typical measurement distances
(Width/height of measurement square)
Low magnification
macro ring
High magnification
macro ring
Standard lens
Wide lens
Telephoto lens
Distance
Measurable display size
(inches)
Measurable display size
(inches)
Measurable display size
(inches)
Measurable display size
(inches)
Measurable display size
(inches)
Measurement
size
Measurement
size
Measurement
size
Measurement
size
Measurement
size
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
16
9
4
3
4
3
16
9
4
：
3
16
9
4
：
3
16
：
9
4
3
：
：
：
：
：
：
16
：
9
200
250
300
500
900
1000
1500
2000
3000
4000
5000
145
190
235
416
779
7.1
9.3
12
20
38
43
65
87
6.5
8.6
11
19
35
39
60
80
98
121
212
393
439
665
892
1345
1798
2252
4.4
5.5
9.6
18
20
30
40
61
81
4.8
6
1.2
1.3
27
10.4
19
57
2.5
2.8
116
130
203
275
420
566
711
5.2
5.9
9.2
12
19
26
5.7
6.4
10
14
21
28
35
22
33
44
66
869
1323
1776
2682
3589
4495
132
177
221
121
162
203
89
102
111
32
Dimensions (Unit: mm)
When standard lens and lens hood are attached
<Reference position>
60
52.8 113
60
Reference Position
M5, Depth: 6.5
Tripod Socket
UNC 1/4, Depth: 6.5
ＣＡ－２０００
Hole for positioning pin
Rubber foot diameter: 15
14
14
95.2
125.2
160
199
223.5
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Specifications CA-2000
Model
CA-2000S
CA-2000W
CA-2000T
CCD image sensor (monochrome); 2/3-inch; Effective number of pixels: 1,000 x 1,000 pixels; Equipped with XYZ filter (closely matches CIE 1931 color-
matching function) and ND filter
Light receptor
Lens
Interchangeable Standard, wide, and telephoto lenses; low-magnification and high-magnification macro rings (for use with telephoto lens)
980 x 980 (Available to select 490 x 490 or 196 x 196 by using Data Management Software CA-S20w)
Measurement points (Resolution)
Color indication modes
Display modes
XYZ, L xy, L u’v’, T uv, Dominant wavelength, Excitation purity, L contrast
v
v
v
Pseudocolor, RGB image, Chromaticity diagram, Spot, 3D graph, Histgram, Nonuniformity enhancement, Cross section, Color difference, Multi-screen
Standard lens
Wide lens
Telephoto lens
With low-magnification macro ring With high-magnification macro ring
Measurement sizes
Approx. 98 mm or more
Approx. 145 mm or more
Approx. 115 mm or more
(length per side of square) (*1)
Approx. 57mm (Fixed)
Approx. 27mm (Fixed)
(depending on the distance)
98 mm / 250 mm mm Approx.
210 mm / 500 mm Approx.
440 mm / 1,000 mm Approx.
890 mm / 2,000 mm Approx.
(depending on the distance)
145 mm / 200 mm Approx.
410 mm / 500 mm Approx.
850 mm / 1,000 mm Approx.
1,770 mm/ 2,000 mm Approx.
(depending on the distance)
115 mm / 900 mm Approx.
275 mm / 2,000 mm Approx.
57 mm / 500 mm Approx.
(Fixed)
27 mm / 300 mm Approx.
(Fixed)
Measurable size for typical measure-
ment distances (size/distance)
420 mm / 3,000 mm Approx.
0.5 - 100,000 cd/m2
Measurement luminance range
(including ND filter use)
0.1 - 100,000 cd/m2
0.1 - 100,000 cd/m2
0.5 - 100,000 cd/m2
1 - 100,000 cd/m2
Single : Approx. 5 sec. or more; 4-time integration: Approx. 6 sec. or more; 16-time integration: Approx. 10 sec. or more; 64-time integration : Approx. 28 sec.
or more; 256-time integration : Approx. 98 sec. or more
Measurement time (*2)
Luminance
Chromaticity
3 %
0.005
3 %
0.005
3 %
0.005
3 %
0.005
3 %
0.005
Temperature/humidity drift (within the operating temperature/humidity range)
Accuracy (*3)
Luminance: 2% of change compared to reference temperature and relative humidity of 23°C and 40%
Chromaticity: 0.004 of change compared to reference temperature and relative humidity of 23°C and 40%
Luminance
Repeatability (*4)
0.5 %
0.001
2 %
0.5 %
0.001
2 %
0.5 %
0.001
2 %
0.5 %
0.001
2 %
0.5 %
0.001
2 %
Chromaticity
Luminance (*6)
Chromaticity (*6)
Luminance (*7)
Chromaticity (*7)
0.002
3 %
0.003
0.002
3 %
0.003
0.002
3 %
0.003
0.002
3 %
0.003
0.002
3 %
0.003
Inter-point error
(*5)
Interval measurement, Measurement sync (Synchronization frequency selectable), Integration function, Enhanced nonuniformity display, Conversion of en-
hanced nonuniformity image into numerical values (statistical values, etc.), Pixel binning function
USB 2.0 or higher
Other functions
Interface
Operating temperature and humidity range (*8) 10-30°C, Relative humidity 70% or less/No condensation
Storage temperature and humidity range (*8) 0-30°C, Relative humidity 70% or less/No condensation, 30-35°C, Relative humidity 55% or less/No condensation
Body only
160 (W) × 164 (H) × 199 (D) mm (Height including handle: 211 mm
)
Size
When lens and lens hood are attached 224 (D) mm
219 (D) mm
224 (D) mm
230 (D) mm
CA-A70
237 (D) mm
Weight
Power source
3.5 kg approx. (when standard lens and lens hood are attached)
AC adapter 100-240 V , 1.2 A, 50-60 Hz
Lens Hood
Hood Cap
CA-A68
CA-A71
CA-A69
CA-A75
CA-A68
CA-A71
Standard
accessories
Calibration data DVD Included with each lens.
Other
Optional accessories
Mount Cover CA-A61, AC Adapter, USB Cable IF-A18, Data Management Software CA-S20w
Soft Case CA-A60, Tripod CS-A3, Pan Head CS-A4, Calibration certificate
*1: Error in angle of view: 7%
CA-S20w System Requirements
*2: Measurement time differs depending on brightness of measurement object, PC performance, and data processing
contents.
The specifications above were obtained under Konica Minolta's measurement conditions shown below:
OS
Windows XP Professional 32-bit SP3, 64-bit SP2; Windows Vista Business 32-bit, 64-bit
PC's CPU
:
:
:
:
Pentium 4, 2.8GHz
Windows 7 Professional 32-bit, 64-bit
Data processing
Resolution
Pseudocolor display of luminance data
490 x 490
(English, Japanese and Korean versions
For Windows® XP professional 64-bit, English and Japanese versions only)
Shutter speed
Y measurement : 1/64 sec., XZ measurement : 1/32 sec.
Measurement subject brightness: Standard/wide lens: Approx. 80 cd/m2, Telephoto lens: Approx. 300 cd/m2
Low-magnification macro ring and telephoto lens: Approx. 400 cd/m2,
CPU
Pentium®
4
2.8 GHz equivalent or higher
High-magnification macro ring and telephoto lens: Approx. 600 cd/m2
*
The measurement time becomes longer when the object is dark. The longest measurement time is approx. 10 seconds with
1-time integration, approx. 27 seconds with 4-time integration, approx. 95 seconds with 16-time integration, approx. 6 minutes
and 8 seconds with 64-time integration and approx. 24 minutes and 19 seconds with 256-time integration
Memory
1024 MB or more
Hard Disk Needs free space of 80 MB at least on system drive (where OS is installed)
In addition, each lens needs the following free spaces for installing calibration data.
For standard lens: approx. 540 MB
*3: The specifications above were obtained under Konica Minolta's measurement conditions shown below:
Measurement subject brightness: Standard/wide lens: Approx. 35 cd/m2, Telephoto lens: Approx. 140 cd/ m2
Low-magnification macro ring and telephoto lens: Approx. 250 cd/m2,
High-magnification macro ring and telephoto lens: Approx. 250 cd/m2
For wide lens: approx. 470 MB
Distance: Minimum distance of each lens, Evaluation: Based on the average obtained within 10% range at the
center of the screen, Temperature: 23°C 2°C, Relative humidity: 40% 10%, Measuring light: White, reference
light source, Integration: 64 times (Normal mode)
For telephoto lens: approx. 1.3 GB
Also to save measurement data on hard disk, additional free space is required.
(approx. 11 GB minimum for 1000 measurement data in resolution of 980 x 980)
*4: The specifications above were obtained under Konica Minolta's measurement conditions shown below:
Resolution: 196 x 196, Shutter speed: Y measurement: 1/64 sec., XZ measurement: 1/32 sec. Gain : Normal
(x1), Light intensity level: Midpoint of appropriate light intensity range, Evaluation: Based on the maximum repeat-
ability (2 ) of all pixels, Temperature: 23°C 2°C, Relative humidity: 40% 10%, Measurement subject:
White, reference light source, Integration: 64 times (Normal mode)
*5: The specifications above were obtained under Konica Minolta's measurement conditions shown below:
Measurement subject brightness: Standard/wide lens: Approx. 40 cd/m2, Telephoto lens: Approx. 160 cd/m2
Low-magnification macro ring and telephoto lens: Approx. 200 cd/m2,
Display
Others
Display capable of at least 1280 x 1024 dots / High color, 16-bit (Full color, 32-bit recommended)
Optical drive capable of reading CD-ROM (for installing software) and DVD-ROM (for installing calibration
data) necessary.
USB port: USB ver. 2.0; Type A connector; For connecting measuring instrument
Excel® 2003 (under Windows® XP), Excel® 2007 (under Windows® Vista/Windows® 7), or
Excel® 2010 (under Windows® 7) necessary for continuous measurements using automation.
High-magnification macro ring and telephoto lens: Approx. 350 cd/m2
Distance: Calibration distance of each lens, Resolution: 196 x 196
Evaluation (*6) : Based on the maximum/minimum values obtained in a square at the center of the screen measur-
ing 60% of the height and width of the entire screen
s
Windows®, Excel® is a registered trademark or a trademark of Microsoft Corporation in the United States and other countries.
(*7) : Based on the maximum/minimum values obtained in the entire screen
Temperature: 23°C 2°C, Relative humidity: 40% 10%, Measurement subject: White, reference light source,
Integration: 64 times (Normal mode)
s 0ENTIUM® is a registered trademark or a trademark of Intel Corporation in the United States and other countries.
*8: Even if the instrument is stored within the specified usage (or storage) temperature humidity range, the displayed
value may change depending on long-period usage or storage conditions.
The specifications and drawings given here are
subject to change without prior notice.
- If you have any questions about specifications,
please contact your Konica Minolta representative.
- The specifications given here are subject to
change without prior notice.
SAFETY PRECAUTIONS
For correct use and for your safety, be sure to read the instruction
manual before using the instrument.
Always connect the instrument to the specified power supply
voltage. Improper connection may cause a fire or electric shock.
Certificate No : LRQ 0960094/A
Registration Date : March 3, 1995
Certificate No : JQA-E-80027
Registration Date : March 12, 1997
Download from Www.Somanuals.com. All Manuals Search And Download.
9242-4883-21 BCDKPK
12
¢2005 KONICA MINOLTA OPTICS, INC.
Printed in Japan
|