Model: T121 IB (English Version)
Color : Black text on white paper
Size: 120 W x 170 H mm (folded)
Date: Jun 10, 2013
Limited 90 Day Warranty Information
Operating Instructions
Care and Maintenance
Model T121
Unwind the AC power cord completely and insert the plug into a 120V/60Hz AC outlet. Use an
outlet that is always ‘live’. Do not use an outlet that is controlled by a wall switch.
Replacing the Back-Up Batteries
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants
this product to be free from defects in workmanship and materials, under normal use and
conditions, for a period of ninety (90) days from the date of original purchase.
Extra Loud
Alarm Clock
Fresh back-up batteries can last for up to one year, depending on the frequency and length of
the power interruptions that you experience in your home. When the batteries are getting weak
the Low Battery indicator begins flashing in the display. Replace the batteries as soon as you
see this indicator. NOTE: To avoid having to reset the time and alarm settings, leave the clock
connected to the AC outlet when changing the batteries.
When the clock is connected to the AC outlet for the first time the display will turn on and begin
flashing “12:00 (PM)”. If the back-up batteries were not installed, the Low Battery indicator will
also be flashing.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store
where it was originally purchased. Should this fail to resolve the matter and service still be required
by reason of any defect or malfunction during the warranty period, SDI will repair or, at its
discretion, replace this product without charge. This decision is subject to verification of the defect
or malfunction upon delivery of this product to the Factory Service Center authorized by SDI
Customer Service. The product must include proof of purchase, including date of purchase. An
out-of-warranty fee for service will be charged for units that are received without proof of
purchase.
Setting The Time
1. Depress the Time button and the Hour button together to advance the display to the correct hour, and
then release both buttons. Observe the PM indicator to confirm that you have set the hour correctly. If
the PM indicator is ‘On’ the hour on the display is PM. If the PM indicator does not appear the hour on
the display is AM.
2. Depress the Time button and the Minute button together to advance the display to the correct minute,
and then release both buttons. The time is now set and the clock is running.
Cleaning the Cabinet
If the cabinet becomes dusty wipe it with a soft dusting cloth. Do not use dusting sprays. If the
cabinet becomes smudged or dirty, wipe it with soft cloth slightly dampened with a mild soap
and water solution. Never use harsh or abrasive cleaners and never allow water or any other
liquid to enter the cabinet.
Before returning this product for service, please first replace the batteries (if applicable) with fresh
ones, as exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Call SDI Customer Service at 1-800-888-4491 for Return Authorization and for the address of
the Factory Service Center.
Setting The Alarm Time
2. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
SDI is not responsible for damage that occurs during shipping to the Factory Service Center.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of
purchase, if within the warranty period. Also include your name and address information, a brief
description for why the unit is being returned, and the return authorization number. No unit can
be processed without a return authorization number.
1. Depress the ALM Set/Reset button and the Hour button together to advance the display to the desired
wake up hour, and then release both buttons. Observe the PM indicator to confirm that you have set
the wake-up hour correctly. If the PM indicator is ‘On’ the wake-up hour on the display is PM. If the PM
indicator does not appear the wake-up hour on the display is AM.
2. Depress the ALM Set/Reset button and the Minute button together to advance the display to the
correct wake-up minute, and then release both buttons. The wake-up time is now set.
3. To activate the alarm press the ALM On/Off button. The ALM indicator appears in the lower left corner
of the display to confirm that the alarm is ‘On’.
4. Write the return authorization number on the side of the shipping package and send the unit
prepaid and insured to the Factory Service Center address authorized by SDI Customer Service.
Disclaimer of Warranty
At the selected wake-up time the buzzer alarm will turn on. It begins softly and gradually increases in
volume to wake you gently. The alarm sound will continue for one hour and then shut off and reset itself for
the following day.
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover (i) products which have been damaged by negligence or willful actions, misuse
or accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or
broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s
or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center
and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will SDI or any of its affiliates, contractors,
resellers, their officers, directors, shareholders, members or agents be liable to you or any third
party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive
damages. (Some states do not allow limitations on implied warranties or exclusion of
consequential damages, so these restrictions may not apply to you.) This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state.
To stop the alarm sooner, press the ALM Set/Reset button again. The alarm will shut off immediately and
reset itself for the following day.
To cancel the alarm so that it does not turn on again on the following day, press the ALM On/Off button
until the ALM indicator no longer appears in the display.
NOTE: You may also adjust the loudness of the alarm with the Alarm Loud/Soft switch on the back panel.
Snooze Alarm
For a few minutes extra sleep after the alarm turns on, press the Snooze Bar on the top panel. The alarm
will stop for 9 minutes and then turn on again. The Snooze operation may be repeated several times within
the first hour but after one hour the alarm will not turn on again. It will reset itself for the following day.
For additional information, online registration,
and exclusive special offers visit our website:
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,
cashier's check, or credit card) for purchase of your SDI product.
© 2013 SDI Technologies, Inc. All rights reserved
or call 1-800-888-4491 Toll Free
For questions or comments regarding this or other products,
please call our toll-free number 1-800-888-4491.
Preparation For Use
A Consumer Guide to Product Safety
Controls and Indicators
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
Battery Back-up System
Front Panel
Your new Timex Alarm Clock includes a battery back up system that will maintain the time and alarm
settings and even turn on the alarm during a temporary power interruption. The battery back up system
requires two “AAA” batteries, not included. We recommend you use a well-known brand of alkaline
batteries for longest life and best performance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential
electrical shock or fire hazards.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
PM Indicator
Time Display
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
Installing The Batteries
Alarm ‘On’ Indicator
Low Battery Indicator
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE CHOC ÉLECTRIQUE, NE PAS
EXPOSER CET APPAREIL SOUS LA PLUIE ET L’HUMIDITÉ
4. Follow all instructions.
Press
5. Water and Moisture - Do not use this apparatus near water. For example: near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a wet basement.
6. Ventilation - Do not block any of the ventilation openings. Install in accordance with the manufacturers
instructions. For example, it should not be situated on a bed, sofa, rug or similar surface that may block
ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet
that may impede the flow of air through the ventilation openings.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user of the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk electric shock to persons.
Top Panel
7. Heat - Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
8. Power Sources - The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the appliance.
The exclamation point within an equilateral triangle is intended to alert the user of the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
Hour Button
Time Button
Minute Button
• Press on the battery door locking tab to open and remove the battery door.
• Install two “AAA” batteries in the battery compartment. Observe the polarity (+/ - ) markings in the battery
compartment to make sure the batteries are inserted correctly.
• Replace the battery door.
9. Grounding or Polarization - Do not defeat the safety purpose of the polarized or grounding - type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety. When the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Power-Cord Protection - Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus. It is always best to have a
clear area from where the cord exits the unit to where it is plugged into an AC outlet.
11. Cleaning - Unplug this product from the well outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Clean only with a dry cloth.
12. Non-Use Periods – The power cord of the unit should be unplugged from the outlet when it is to be
left unused for a long period of time.
13. Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled
into the enclosure through openings.
The symbols above are located at the bottom of the cabinet.
Alarm On/Off Button
Alarm Set/Reset Button
CAUTION: To prevent electric shock, do not use this (Polarized) plug with an extension cord
receptacle, or other outlets unless the blades can be fully inserted to prevent blade exposure.
Snooze Bar
ATTENTION: Pour prévenir les chocs électriques ne pas utiliser cette fiche polarisée avec un
prolongateur. Une prise de courant, ou une autre sortie de courant sauf si les lames peuvent étre
insérées à fond sans en laisser aucune partie à decouvert.
Back Panel
AC Power Plug
This model is equipped with a polarized AC power plug that has one wide blade and one narrow blade.
This plug will only fit in a polarized AC outlet. This is a safety feature designed to prevent electric shock. Do
not try to defeat this safety feature by filing the wider blade or using an adapter to make this plug fit in a
non-polarized outlet. If this plug will not fit in your outlet you should have your outlet changed by a qualified
electrician.
ALARM SOUND
Alarm Loud/Soft Switch
AC Power Cord
SOFT |
LOUD
A Consumer Guide to Product Safety
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on apparatus.
L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant
de liquide, tel qu'un vase, ne doit être placé sur l'objet.
14. Attachments - Only use attachments/accessories specified by the manufacturer.
15. Lightning - Unplug this apparatus during lightning storms or when unused for long periods of time.
16. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
• Main plug is used as disconnect device and it should remain readily operable during intended use. In order
to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the
mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation.
Pour être complètement déconnecté de l'alimentation d'entrée, la prise doit être débranchée du secteur.
17. Damage Require Service - Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
ALARM SOUND
SOFT |
LOUD
Bottom Cabinet
AC Outlet
18. Servicing - The user should not attempt to service the unit beyond that described in the user’s operating
instructions. All other servicing should be referred to qualified service personnel.
19. Safety Check - Upon completion of any service or repairs to this product, ask the service telchnician
to perform safety checks to determine that the product is in proper operating condition.
20. Antenna - Do not connect to an external antenna.
• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au feu ou autres
choses de semblable.
AC Plug
Back-up Battery
Compartment
• Caution marking is located at the bottom of apparatus.
Les précautions d'emploi sont inscrites en bas de l'appareil.
• The marking information is located at the bottom of apparatus.
Les marquages sont inscrits en bas de l'appareil.
Download from Www.Somanuals.com. All Manuals Search And Download.
|