Therma-Tru® Light Commercial/Multi-Family - Doors and Frames
• Material shown on these drawings will be
DOOR HANDING CHART
• All standard type hardware will be located at this
fabricated only after formal approval by the
architect, receipt of approval hardware schedule,
and all necessary hardware templates.
manufacturer’s standard locations as shown on
the door and frame elevations. Hardware items
such as panic exit devices, deadbolts, etc. will also
be located at manufacturer’s standard locations
unless specifically advised.
SINGLE DOORS
OUTSIDE
LEFT HAND INSWING
OUTSIDE
• All frames shall be shipped “knocked-down”
unless otherwise specified.
RIGHT HAND INSWING
• Installations of all glass and glazing to be
performed by others.
• All frames and doors shall be chemically washed,
rinsed, and dried prior to receiving one coat of
paint.
OUTSIDE
OUTSIDE
LEFT HAND REVERSE/
RIGHT HAND REVERSE/
LEFT HAND OUTSWING
RIGHT HAND OUTSWING
• Doors, frames, and finished hardware to be
installed by others.
• Doors and frames will be reinforced for surface
mounted hardware as required. Drilling and
tapping for surface mounted hardware shall be
applied by others.
PAIRS OF DOORS
• Anchor bolts and expansion shields for any type
fastener to be furnished by others.
OUTSIDE
OUTSIDE
RIGHT HAND ACTIVE
• All frames must be set absolutely plumb, square,
and level.
LEFT HAND ACTIVE
• It will be the responsibility of the General
Contractor to coordinate hardware locations.
• All frames will be supplied with rubber door
silencers: three for single swing openings and two
per header for double swing openings.
OUTSIDE
OUTSIDE
• All frames will be supplied with the required wall
and floor anchors as illustrated on the frame detail
sheet.
LEFT HAND REVERSE ACTIVE/
RIGHTHANDOUTSWINGACTIVE
RIGHT HAND REVERSE ACTIVE/
LEFT HAND OUTSWING ACTIVE
• All frames and doors wll be tagged with shop
marks. This schedule can be used to cross
reference shop marks with architects marks.
JOB NUMBER:
PROJECT:
RECORD OF SUBMITTALS
SUBMITTED
RETURNED
1st
2nd
3rd
4th
LOCATION:
• These drawings are not intended for use by other
trades.
ARCHITECT:
CONTRACTOR:
RECORDED APPROVED DRAWINGS
RECORDED APPROVED HARDWARE
DRAWN BY:
FINISHED HARDWARE BY:
SHEET NUMBER:
• Field welding, grinding, finishing, and attachment
of field splices by others.
OF
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - 22-Gauge & 24-Gauge Steel Doors
DOOR ELEVATIONS - FLUSH - LITED
4”
5”
10”
22”
22”
3”
EQUAL
EQUAL
EQUAL
EQUAL
EQUAL
EQUAL
EXPOSED GLASS
SIZE: 3” x 33”
EXPOSED GLASS
SIZE: 4” x 25”
EXPOSED GLASS
SIZE: 5” x 20”
EXPOSED GLASS
SIZE: 10” x 10”
EXPOSED GLASS
SIZE: 22” x 28”
EXPOSED GLASS
SIZE: 22” x 34”
DOOR ELEVATIONS - EMBOSSED - OPAQUE
STYLE# SE210HD
STYLE# 514
STYLE# SE960HD
STYLE# SE969HD
STYLE# SE978HD
STYLE# 500
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - FG Doors
DOOR ELEVATIONS - SMOOTH
STYLE# SSF100
STYLE# SSF160
STYLE# SSF200
STYLE# SSF960
DOOR ELEVATIONS - GRAINED
STYLE# FCF100
STYLE# FCF140
STYLE# FCF160
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Standard Hardware Preps.
4" x 4" HINGE DETAIL
STANDARD LATCH PREP
LATCH PREPS
BENCHMARK STEEL ENTRANCE DOOR
B
.097(12GA.)
2.040
.018
4.080
5/8" RAD.
DEADBOLT HOLE: DRILLED
D
THROUGH WOOD BLOCK.
T
DRILL .295/.300 DIA.
COUNTERSUNK FOR A #10
FLAT HEAD SCREW.
DEADBOLT FILLER PLATE
D
DDEADBOLTASSEMBLY
STANDARD 1 1/18" x 2 1/4"
STRIKE WITH OPTIONAL
1 1/18" x 2 1/4"DEADBOLT PREP.
1 1/4" x 8" MORTISE LOCK PREP.
NOTE: MORTISE LOCK IS NOT
OFFERED WITH LANDMARK
DOORS.
.375
.
NOTE: ALL DIMENSIONS ARE
TYPICALONBOTHSIDES.
1.062
KNOB LATCH
LATCH FILLER PLATE
STEEL DEADBOLT PREP
STEEL TEE STRIKE PREP
STEEL LIP STRIKE PREP
STEEL 4 7/8" ANSI PREP
STAMPED 1 1/18" x 2 3/4" OPTIONAL
DEADBOLT PREP FOR STEEL FRAMES.
AVAILABLE WITH ADJUSTA-FIT,
ADJUSTA-TRIM, & SECURA-FIT
FRAMES.
STAMPED TEE STRIKE PREP FOR STEEL
FRAMES. AVAILABLE WITH ADJUSTA-
FIT, ADJUSTA-TRIM & SECURA-FIT
FRAMES.
STAMPED LIP STRIKE PREP FOR STEEL
FRAMES. AVAILABLE WITH ADJUSTA-
FIT, ADJUSTA-TRIM & SECURA-FIT
FRAMES.
STAMPED 4 7/8" ANSI STRIKE PREP
FOR STEEL FRAMES. AVAILABLE
WITH ADJUSTA-FIT, ADJUSTA-TRIM &
SECURA-FIT FRAMES.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Hardware Locations
STANDARD STEEL ENTRANCE DOORS
HARDWARE LOCATIONS
F
NOMINAL WIDTH (FRAME OPENING)
ACTUAL WIDTH
NOMINAL FRAME OPENING WIDTH
9 3/4" 9 3/4"
5 1/2" DEADBOLT
2 3/8" OR 2 3/4"
BACKSET (STD.)
SQUARE EDGE
NOTES:
FLOOR
HINGE BACKSET = 5/32"
22 GA. = .027 MIN.
24 GA. = .023 MIN
UNDERCUT OPTIONS:
STANDARD - 1 3/4"
DOORS UNDER 6-8 OR
OVER 7-0 ARE AVAILABLE.
CONTACT YOUR REP. FOR
MORE INFO.
PUBLIC ACCESS - 1 1/8"
NO SILL OPTION - 3/4"
STANDARD 1 3/4" DOOR, HINGE and CYLINDER LOCK LOCATIONS:
DOOR WIDTH
NOMINAL
ACTUAL
2-0
2-4
2-6
2-8
2-10
3-0
3-6
23 11/16" 27 11/16" 29 11/16" 31 11/16" 33 11/16" 35 11/16" 41 11/16"
DOOR HEIGHT
NOMINAL
ACTUAL
6-8
78 5/8"
7-0
82 1/8"
8-0
93"
MORTISE PREP
45 1/4"
45 1/4"
59 5/8"
CYLINDRICAL PREP
44 7/8"
44 7/8"
59 1/4"
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER
OF
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Custom Elevations/Applications
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER
OF
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Fit® Frames - Single
HARDWARE LOCATIONS
FRAME DETAIL
AVAILABLE THRESHOLDS
NOMINAL FRAME OPENING WIDTH
NOTE: BASE FRAME = 16-GA.
CLOSURE FRAME=22-GA.
EXISTING WALL
ADJUSTA-FIT CLOSURE HEADER
ADJUSTA-FIT CLOSURE JAMB
ADJUSTA-FIT FRAME HEADER
STEEL ENTRANCE DOOR
EXISTING WALL
COMPRESSION
WEATHERSTRIPPING
STEEL ENTRANCE DOOR
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
STEEL ENTRANCE DOOR
ADJUSTA-FIT FRAME
LATCH JAMB
ADJUSTA-FIT FRAME
HINGE JAMB
2-0 = 24" 2-4 = 28" 2-6 = 30" 2-8 = 32"
2-10 = 34" 3-0 = 36" 3-6 = 42"
4" x 4" HINGE
1 1/8"
2-0 = 25" 2-4 = 29" 2-6" = 31" 2-8 = 33"
2-10 = 35" 3-0 = 37" 3-6 = 43"
ADJUSTABLE SWEEP
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
BARRIER FREE THRESHOLD:
OPTIONAL
ADJUSTA-FIT KERFED FRAME
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
4 5/8" - 5"
5 1/8" - 5 5/8"
5 5/8" - 6"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3
3A
4
4A
5
5A
6
6A
7
7A
8
8A
9
9A
10
16-GA. BASE JAMB
22-GA. CLOSURE JAMB
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
25"
ROUGH
OPENING
HEIGHT - STD
80 3/4"
ROUGH OPENING
HEIGHT -
BARRIER FREE
80 1/8"
ROUGH OPENING
HEIGHT -
NO SILL OPTION
79 3/4"
2-0 x 6-8
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
3-6 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
29"
31"
33"
35"
37"
43"
25"
29"
31"
33"
35"
37"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
10 1/8" - 10 5/8"
THRESHOLDS
ADJUSTA-FIT FRAMES
TWO PIECE
BARRIER FREE
HINGES
KERFED FOR
WEATHERSTRIPPING
REMOVABLE PIN
NON-REMOVABLE PIN
SPRING LOADED
BALL BEARING
43"
84 1/4"
83 5/8"
83 1/4"
1 13/16”
LATCH PREPS
4 7/8" ANSI (STD)
T-STRIKE w/ DEADBOLT
VARIES WITH 2 3/16”
WALL SIZE
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Fit® Frames - Double
HARDWARE LOCATIONS
FRAME DETAIL
AVAILABLE THRESHOLDS
NOMINAL FRAME OPENING WIDTH
EXISTING WALL
NOTE: BASE FRAME= 16-GA.
CLOSUREFRAME= 22-GA.
ADJUSTA-FIT CLOSURE HEADER
ADJUSTA-FIT FRAME HEADER
STEEL ENTRANCE DOOR
ALUMINUM ASTRAGAL w/COMPRESSION
WEATHERSTRIPPING
ADJUSTA-FIT CLOSURE JAMB
TYPICAL BOTH SIDES
COMPRESSION
EXISTING WALL
WEATHERSTRIPPING
TYPICAL BOTH SIDES
ACTIVE STEEL
ENTRANCE DOOR
INACTIVE
DOOR
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
ADJUSTA-FIT FRAME
ADJUSTA-FIT FRAME
HINGE JAMB
STEEL ENTRANCE DOOR
INACTIVE HINGE JAMB
4" X 4" INACTIVE HINGE
4" x 4" HINGE
4-0 = 48 17/32" 5-0 = 60 17/32" 5-4 = 64 17/32" 6-0 = 72 17/32"
4-0 = 49 1/2" 5-0 = 61 1/2" 5-4 = 65 1/2" 6-0 = 73 1/2"
1 1/8"
ADJUSTABLE SWEEP
ADJUSTABLE SWEEP
TWO-PIECE THRESHOLD
BARRIER FREE THRESHOLD:
OPTIONAL
ADJUSTA-FIT KERFED FRAME
WALL SIZE
CLOSURE MODEL
3 3/8" - 3 3/4"
3 3/4" - 4 1/8"
4 1/8" - 4 5/8"
4 5/8" - 5"
5 1/8" - 5 5/8"
5 5/8" - 6"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
3
3A
4
4A
5
5A
6
6A
7
7A
8
8A
9
9A
10
16-GA. BASE JAMB
22-GA. CLOSURE JAMB
NOMINAL
FRAME
ROUGH
OPENING
WIDTH
ROUGH
OPENING
HEIGHT - STD
ROUGH OPENING
ROUGH OPENING
HEIGHT -
NO SILL OPTION
79 3/4"
HEIGHT -
BARRIER FREE
80 1/8"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
OPENING
4-0 x 6-8
5-0 x 6-8
5-4 x 6-8
6-0 x 6-8
4-0 x 7-0
5-0 x 7-0
5-4 x 7-0
6-0 x 7-0
49 1/2"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
61 1/2"
65 1/2"
73 1/2"
49 1/2"
61 1/2"
65 1/2"
73 1/2"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
10 1/8" - 10 5/8"
THRESHOLDS
ADJUSTA-FIT FRAMES
TWO PIECE
BARRIER FREE
HINGES
KERFED FOR
WEATHERSTRIPPING
REMOVABLE PIN
NON-REMOVABLE PIN
SPRING LOADED
BALL BEARING
1 13/16”
LATCH PREPS
4 7/8" ANSI (STD)
T-STRIKE w/ DEADBOLT
VARIES WITH 2 3/16”
WALL SIZE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Trim® Frames - Single
HARDWARE LOCATIONS
FRAME DETAIL
AVAILABLE THRESHOLDS
EXISTING WALL
7 1/4”
ADJUSTA-TRIM CLOSURE
ADJUSTA-TRIM CLOSURE JAMB
EXISTING WALL
COMPRESSION
ADJUSTA-TRIM FRAME
STEEL DOOR
WEATHERSTRIPPING
COMPRESSION
WEATHERSTRIPPING
STEEL ENTRANCE DOOR
NOTE: DEDUCT 5/8" FROM ALL
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
WOOD SPACER
ADJUSTA-TRIM FRAME
HINGE JAMB
ADJUSTA-TRIM FRAME
LATCH JAMB
STEEL ENTRANCE DOOR
2-0 = 24" 2-4 = 28" 2-6 = 30" 2-8 = 32"
2-10 = 34" 3-0 = 36" 3-6 = 42"
4" x 4" HINGE
2-0 = 25" 2-4 = 29" 2-6" = 31" 2-8 = 33"
2-10 = 35" 3-0 = 37" 3-6 = 43"
1 1/8"
ADJUSTABLE SWEEP
VARIES
ADJUSTABLE SWEEP
BARRIER FREE THRESHOLD:
OPTIONAL
TWO-PIECE THRESHOLD
ADJUSTA-TRIM KERFED FRAME
16-GA. BASE JAMB
20-GA. CLOSURE JAMB
NOMINAL
FRAME
OPENING
ROUGH
ROUGH
OPENING
HEIGHT - STD
80 3/4"
ROUGH OPENING
HEIGHT -
BARRIER FREE
80 1/8"
ROUGH OPENING
HEIGHT -
NO SILL OPTION
79 3/4"
OPENING
WIDTH
25"
WALL SIZE
4 1/8" - 4 5/8"
4 5/8" - 5"
5 1/8" - 5 5/8"
5 5/8" - 6"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
10 1/8" - 10 5/8"
CLOSURE MODEL
2-0 x 6-8
4
4A
5
5A
6
6A
7
7A
8
8A
9
9A
10
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
3-6 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
3-6 x 7-0
29"
31"
33"
35"
37"
43"
25"
29"
31"
33"
35"
37"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
ADJUSTA-TRIM FRAMES
1/2”
1/2”
43"
84 1/4"
83 5/8"
83 1/4"
KERFED FOR
WEATHERSTRIPPING
THRESHOLDS
WEATHERSTRIPPING
STRIKE PREPS
HINGES
Removable Pin
Non-Removable Pin
FIRE RATINGS
Two-Piece
Barrier Free
X
X
Lip Strike w/ Opt. Deadbolt
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
X
X
X
X
X
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
X
Compression
X
X
X
X
Frost Break Inswing: FBI
Frost Break Outswing: FBO
Ball Bearing
Spring Loaded
2 3/16”
VARIES WITH
WALL SIZE
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Adjusta-Trim® Frames - Double
HARDWARE LOCATIONS
FRAME DETAIL
AVAILABLE THRESHOLDS
NOMINAL FRAME OPENING WIDTH
NOTE: BASE FRAME= 16-GA.
CLOSUREFRAME= 22-GA.
EXISTING WALL
ADJUSTA-TRIM CLOSURE
ALUMINUM ASTRAGAL w/COMPRESSION
WEATHERSTRIPPING
ADJUSTA-TRIM CLOSURE JAMB
TYPICAL BOTH SIDES
ADJUSTA-TRIM FRAME
STEEL DOOR
EXISTING WALL
COMPRESSION
WEATHERSTRIPPING
TYPICAL BOTH SIDES
ACTIVE STEEL
ENTRANCE DOOR
INACTIVE
DOOR
NOTE: DEDUCT 5/8" FROM ALL
WOOD SPACER
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
ADJUSTA-TRIM FRAME
ADJUSTA-TRIM
INACTIVE HINGE JAMB
FRAME HINGE JAMB
STEEL ENTRANCE DOOR
4" x 4" INACTIVE HINGE
4" x 4" HINGE
4-0 = 48 17/32" 5-0 = 60 17/32" 5-4 = 64 17/32" 6-0 = 72 17/32"
1 1/8"
ADJUSTABLE SWEEP
ADJUSTABLE SWEEP
BARRIER FREE THRESHOLD:
OPTIONAL
TWO-PIECE THRESHOLD
ADJUSTA-TRIM KERFED FRAME
16-GA. BASE JAMB
20-GA. CLOSURE JAMB
WALL SIZE
CLOSURE MODEL
4 1/8" - 4 5/8"
4 5/8" - 5"
5 1/8" - 5 5/8"
5 5/8" - 6"
6 1/8" - 6 5/8"
6 5/8" - 7"
7 1/8" - 7 5/8"
7 5/8" - 8"
8 1/8" 8 5/8"
8 5/8" - 9"
9 1/8" - 9 5/8"
9 5/8" - 10"
10 1/8" - 10 5/8"
4
4A
5
5A
6
6A
7
7A
8
8A
9
9A
10
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
ROUGH
OPENING
HEIGHT - STD
80 3/4"
ROUGH OPENING
HEIGHT -
BARRIER FREE
80 1/8"
ROUGH OPENING
HEIGHT -
NO SILL OPTION
79 3/4"
4-0 x 6-8
49 1/2"
5-0 x 6-8
5-4 x 6-8
6-0 x 6-8
4-0 x 7-0
5-0 x 7-0
5-4 x 7-0
6-0 x 7-0
61 1/2"
65 1/2"
73 1/2"
49 1/2"
61 1/2"
65 1/2"
73 1/2"
80 3/4"
80 3/4"
80 3/4"
84 1/4"
84 1/4"
84 1/4"
84 1/4"
80 1/8"
80 1/8"
80 1/8"
83 5/8"
83 5/8"
83 5/8"
83 5/8"
79 3/4"
79 3/4"
79 3/4"
83 1/4"
83 1/4"
83 1/4"
83 1/4"
ADJUSTA-TRIM FRAMES
1/2”
1/2”
THRESHOLDS
WEATHERSTRIPPING
STRIKE PREPS
HINGES
FIRE RATINGS
Two-Piece
Barrier Free
Frost Break Inswing: FBI
Frost Break Outswing: FBO
X
X
Lip Strike w/ Opt. Deadbolt
T-Strike w/ Opt. Deadbolt
4 7/8" ANSI w/ Opt. Deadbolt
4 7/8" ANSI w/ Multi-Deadbolt
X
X
X
X
Removable Pin
Non-Removable Pin
Ball Bearing
X
X
X
X
"B" Rating 1 1/2 Hour
"C" Rating 3/4 Hour
No Rating
X
KERFED FOR
WEATHERSTRIPPING
Compression
X
Spring Loaded
2 3/16”
VARIES WITH
WALL SIZE
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Secura-Fit® Frames - Single
HARDWARE LOCATIONS
FRAME DETAIL
AVAILABLE THRESHOLDS
NOMINAL FRAME OPENING WIDTH
NOTE:
SECURA-FIT FRAME = 16-GA.
EXISTING WALL
WOOD DOOR STOP,
INCLUDED w/ SECURA-FIT
WOOD DOOR STOP, INCLUDED
w/ SECURA-FIT FRAME
EXISTING WALL
WEATHERSTRIPPING
MAGNETIC
WEATHERSTRIPPING
SECURA-FIT FRAME HEADER
STEEL DOOR
MORTISED FOR
1/2” 1/2”
.134" HINGES (3)
COMPRESSION
WEATHERSTRIPPING
4
x
4
x
SECURA-FIT FRAME
LATCH JAMB
SECURA-FIT FRAME
HINGE JAMB
STEEL DOOR
NOTE: DEDUCT 5/8" FROM ALL
STANDARD
ANSI 115.3
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
2
3/4" STRIKE
2-6 = 29 1/4”
2-8 = 31 1/4”
2-10 = 33 1/4”
OPTIONAL:
4 1/2” x 4 1/2”
HINGE
3-0 = 35 1/4”
3-6 = 41 1/4”
STEEL ENTRANCE DOOR
(1) ANSI 115.1
-
4
7/8"
(2) DEADBOLT
(3) BLANK
1
1/8" x 2 3/4"
2-6 = 30” - 30 1/4” 2-8 = 32” - 32 1/4” 2-10 = 34” - 34 1/4”
3-0 = 36” = 36 1/4” 3-6 = 42” - 42 1/4”
1 1/8"
ADJUSTABLE SWEEP
ADJUSTABLE SWEEP
BARRIER FREE THRESHOLD:
OPTIONAL
TWO-PIECE THRESHOLD
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
ROUGH
OPENING
HEIGHT
THRESHOLDS
TWO PIECE
2-0 x 6-8
24" - 24 1/4"
28" - 28 1/4"
30" - 30 1/4"
32" - 32 1/4"
34" - 34 1/4"
36" - 36 1/4"
24" - 24 1/4"
28" - 28 1/4"
30" - 30 1/4"
32" - 32 1/4"
34" - 34 1/4"
36" - 36 1/4"
79 7/8" - 80 1/4"
BARRIER FREE
2-4 x 6-8
2-6 x 6-8
2-8 x 6-8
2-10 x 6-8
3-0 x 6-8
2-0 x 7-0
2-4 x 7-0
2-6 x 7-0
2-8 x 7-0
2-10 x 7-0
3-0 x 7-0
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
83 7/8" - 84"
83 7/8" - 84"
83 7/8" - 84"
83 7/8" - 84"
83 7/8" - 84"
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
SPRING LOADED
BALL BEARING
LATCH PREPS
T-STRIKE (STD)
T-STRIKE w/ DEADBOLT
4 7/8" ANSI
4 7/8" ANSI w/ DEADBOLT
83 7/8" - 84"
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER
OF
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Therma-Tru® Light Commercial/Multi-Family - Secura-Fit® Frames - Double
HARDWARE LOCATIONS
FRAME DETAIL
AVAILABLE THRESHOLDS
NOMINAL FRAME OPENING WIDTH
EXISTING WALL
NOTE: BASE FRAME= 16-GA.
CLOSUREFRAME= 22-GA.
WOOD DOOR STOP,
INCLUDED w/ SECURA-FIT
WEATHERSTRIPPING
SECURA-FIT FRAME HEADER
STEEL DOOR
EXISTING WALL
ALUMINUM ASTRAGAL w/
COMPRESSION WEATHERSTRIPPING
WOOD DOOR STOP w/ COMPRESSION
WEATHERSTRIPPING, INCLUDED w/
SECURA-FIT FRAME. TYPICAL BOTH
HINGE JAMBS
ACTIVE STEEL
ENTRANCE DOOR
INACTIVE
NOTE: DEDUCT 5/8" FROM ALL
DOOR
STANDARD HEIGHT DIMENSIONS
FOR BARRIER FREE THRESHOLD
SECURA-FIT FRAME
SECURA-FIT FRAME
INACTIVE HINGE JAMB
STEEL ENTRANCE DOOR
INACTIVE HINGE JAMB
4" x 4" INACTIVE HINGE
5-0 = 59 1/32" 5-4 = 63 1/32" 6-0 = 71 1/32"
4" x 4" HINGE
5-0 = 59 3/4" - 60" 5-4 = 63 3/4" - 64" 6-0 = 71 3/4" - 72"
1 1/8"
ADJUSTABLE SWEEP
ADJUSTABLE SWEEP
BARRIER FREE THRESHOLD:
OPTIONAL
TWO-PIECE THRESHOLD
THRESHOLDS
TWO PIECE
NOMINAL
FRAME
OPENING
ROUGH
OPENING
WIDTH
ROUGH
OPENING
HEIGHT
BARRIER FREE
HINGES
REMOVABLE PIN
NON-REMOVABLE PIN
SPRING LOADED
BALL BEARING
4-0 x 6-8
47 3/4" - 48"
59 3/4" - 60"
63 3/4" - 64"
71 3/4" - 72"
47 3/4" - 48"
59 3/4" - 60"
63 3/4" - 64"
71 3/4" - 72"
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
79 7/8" - 80 1/4"
83 7/8" - 84"
83 7/8" - 84"
83 7/8" - 84"
83 7/8" - 84"
5-0 x 6-8
5-4 x 6-8
6-0 x 6-8
4-0 x 7-0
5-0 x 7-0
5-0 x 7-0
6-0 x 7-0
LATCH PREPS
T-STRIKE (STD)
T-STRIKE w/ DEADBOLT
4 7/8" ANSI
4 7/8" ANSI w/ DEADBOLT
JOB NUMBER
PROJECT
LOCATION
SHEET NUMBER
OF
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
|