O
P
E
R
A
T
I
N
G
I
N
S
T
R
U
C
T
I
O
N
S
L
C
D
4
6
-
9
2
0
C
O
L
O
U
R
T
E
L
E
V
I
S
I
O
N
W
I
T
H
R
E
M
O
T
E
C
O
N
T
R
O
L
F
o
r
a
s
s
i
s
t
a
n
c
e
,
p
l
e
a
s
e
c
a
l
l
o
u
r
T
e
s
c
o
E
l
e
c
t
r
i
c
a
l
H
e
l
p
l
i
n
e
o
n
0
8
4
5
4
5
6
6
7
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Features ................................................................. 2
Accessories............................................................ 2
Introduction............................................................. 2
Preparation............................................................. 2
Safety Precautions ................................................. 3
Widescreen....................................................... 14
IDTV Menu System .............................................. 14
Channel List...................................................... 14
Timers............................................................... 16
Conditional Access ........................................... 16
TV Setup........................................................... 17
Setup ................................................................ 17
Media Browser.................................................. 21
Playing MP3 Files............................................. 21
Viewing JPG Files............................................. 22
Slideshow Options............................................ 22
Video Playback................................................. 22
Analogue TV Menu System.................................. 22
Power Source..................................................... 3
Power Cord......................................................... 3
Moisture and Water ............................................ 3
Cleaning.............................................................. 3
Ventilation........................................................... 3
Heat and Flames ................................................ 3
Lightning............................................................. 3
Replacement Parts............................................. 3
Servicing............................................................. 3
Waste Disposal................................................... 3
Information for Users in European Union
Countries ............................................................ 3
Disconnecting the Device................................... 3
Headphone Volume............................................ 3
Installation........................................................... 4
LCD Screen........................................................ 4
Warning .............................................................. 4
Overview of the Remote Control ............................ 5
LCD TV and Operating Buttons.............................. 6
Viewing the Connections- Back Connectors .......... 6
Viewing the Connections - Side Connectors .......... 8
Aerial Connection................................................... 8
Power Connection.................................................. 9
Side HDMI Connection........................................... 9
Using Digital Multimedia Connectors...................... 9
Picture Menu..................................................... 22
Sound Menu ..................................................... 23
Feature Menu ................................................... 24
Install Menu ...................................................... 26
PC Mode Menu System........................................ 27
PC Position Menu............................................. 27
Displaying TV Information .................................... 28
Mute Function....................................................... 28
PIP (Picture-in-Picture) and PAP (Picture-and-
Picture) Modes ..................................................... 28
Picture Mode Selection......................................... 28
Freezing Picture ................................................... 28
Zoom Modes......................................................... 28
Teletext................................................................. 29
Tips....................................................................... 30
Appendix A: PC Input Typical Display Modes....... 31
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types)............................................. 31
Appendix C: Supported DVI Resolutions.............. 32
Appendix D: PIP/PAP Mode Combinations .......... 32
Appendix E: Supported File Formats for USB
USB Memory Connection................................... 9
Connecting the LCD TV to a PC............................. 9
Connecting to a DVD Player................................... 9
Using Side AV Connectors ................................... 10
Using Other Connectors....................................... 10
Connecting Other Equipment via Scart................ 10
Inserting Batteries in the Remote Control
Mode..................................................................... 33
Specifications ....................................................... 34
Handset.................................................................11
Switching the TV On/Off........................................11
To Switch the TV On..........................................11
To Switch the TV Off..........................................11
Input Selection.......................................................11
Basic Operations...................................................11
Operation with the Buttons on the TV................11
Operation with the Remote Control .................. 12
Initial Settings....................................................... 12
General Operation................................................ 13
Information Banner........................................... 13
Electronic Programme Guide (EPG) .................... 13
Displaying Subtitles .......................................... 13
Digital Teletext (** for UK only) ......................... 14
Analogue Teletext ............................................. 14
English - 1 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 1
16.10.2009 10:21:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
• Remote controlled colour LCD TV.
Accessories
• Fully integrated digital TV (DVB-T).
• HDMI connectors for digital video and audio. This
connection is also designed to accept high definition
signals.
EPG
SCREEN
LANG
SUBTITLE
SLEEP
ABC
1
DEF
GHI
3
2
JKL
MNO
PQR
4
6
5
VWX
8
STU
YZ
• USB input.
7
9
FAV
D
T
V
0
Batteries: 2 X AAA
V
• 200 programmes from VHF, UHF(analogue).
• 300 programmes for digital mode (IDTV).
• OSD menu system.
P
• Two scart sockets for external devices (such as
video, video games, audio set, etc.).
O
K
M
• Stereo sound system. (SRS TruSurround XT)
• Teletext, fastext, TOP text.
• Headphone connection.
Instruction Book
Remote
Controller
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
Introduction
• Child lock.
Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly.
• Automatic sound mute when no transmission.
• NTSC playback.
• PIP / PAP / PAT functions.
• AVL (Automatic Volume Limiting).
Please do keep this manual in a safe place for
future references.
• When no valid signal is detected, after 5 minutes the
TV switches itself automatically to standby mode.
Preparation
• PLL (Frequency Search).
• PC input.
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
• Plug&Play for Windows 98, ME, 2000, XP, Vista.
• Audio line out.
Use this device in moderate climates.
• Game Mode (optional).
• Active antenna power (optional).
• SRS TruSurround XT (optional).
1
0
c
m
English - 2 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 2
16.10.2009 10:21:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries should not be exposed to excessive heat
such as sunshine, fire or the like.
Safety Precautions
Please read the following recommended safety
precautions carefully for your safety.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Power Source
The TV set should be operated only from a 220-240
VAC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourself as this may result in an
electric shock.
Waste Disposal
Instructions for waste disposal:
Moisture and Water
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Do not use this device in a humid
and damp place (avoid the bathroom,
the sink in the kitchen, and near the
washing machine). Do not expose this
device to rain or water, as this may be
dangerous and do not place objects
filled with liquids, such as flower
vases, on top. Avoid from dripping
or splashing.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
If any solid object or liquid falls into the cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Information for Users in European Union
Countries
Cleaning
This symbol on the product or on its
packaging means that your electrical
and electronic device should be
disposed at the end of its service
life separately from your household
wastes. There are separate collection
systems for recycling in EU.
Before cleaning, unplug the TV set
from the wall outlet. Do not use
liquid or aerosol cleaners. Use soft
and dry cloth.
Ventilation
The slots and openings on the TV
For more information, please contact the local
authority or the dealer where you purchased the
product.
set are intended for ventilation and to ensure reliable
operation. To prevent overheating, these openings
must not be blocked or covered in anyway.
Disconnecting the Device
Heat and Flames
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
The set should not be placed near
to open flames and sources of
intense heat such as an electric
heater. Ensure that no open flame
sources, such as lighted candles,
are placed on top of the TV.
Headphone Volume
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
English - 3 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 3
16.10.2009 10:21:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
To prevent injury, this device must be securely
attached to the wall in accordance with the installation
instructions when mounted to the wall (if the option
is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
Licence Notification (optional)
is a trademark of SRS Labs, Inc.
TruSurround technology is incorporated under license
from SRS Labs, Inc.
English - 4 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 4
16.10.2009 10:21:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the Remote Control
1. Standby
2. Yellow / Feature menu / Current language
(*) (in DTV mode)
3. Blue / Install menu / Favourite mode (*) (in
DTV mode)
EPG
4. PIP / PAP mode
5. Guide (in DTV mode)
6. Sleep timer
SCREEN
LANG
SUBTITLE
SLEEP
GHI
3
ABC
1
DEF
7. Subtitle on-off / TXT subtitle
8. Numeric buttons
9. TV – Digital TV mode
10. Volume up
2
PQR
JKL
MNO
4
6
5
VWX
8
YZ
STU
7
9
FAV
D
T
V
11. Programme up / Page down (in DTV
0
mode)
V
12. AV / Source selection
13. Info / Reveal (in TXT mode)
P
14. Return / Exit (in DTV mode) / Index page
(in TXT mode)
15. Cursor up / Page up (in TXT mode)
16. Cursor right
17. OK / Select / Freeze picture / Hold (in TXT
mode)
O
K
18. Cursor down / Page down (in TXT mode)
19. Menu on-off
M
20. Cursor left / Subpage (in TXT mode)
21. Previous Programme / Swap
22. Picture mode selection
23. Programme down / Page up (in DTV
mode)
24. Mute
25. Volume down
26. Favourite mode (in DTV mode)
27. Mono-Stereo / Dual I-II / Current language
(in DTV mode) (*)
28. Image size / Expand (in TXT mode)
29. Teletext / Mix / PAT
30. Update (in TXT mode)
(*) Only for EU country options.
31. Red / Sound menu / Channel list (in DTV
mode)
32. Green / Picture menu / Subtitle on-off (in
DTV mode) (*)
English - 5 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 5
16.10.2009 10:21:15
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD TV and Operating Buttons
1. Standby button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press “
” / “
”
buttons at the same time to view
main menu.
Viewing the Connections- Back Connectors
12
13
1. S/PDIF Digital Out outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.
2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass
effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
3. Audio Line Outs output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
4. SCART 2 inputs or outputs for external devices.
English - 6 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 6
16.10.2009 10:21:16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically switch to
AV mode. If both sockets are employed at the same time, SCART 1 will override SCART 2 unless
manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the Scart 1 (Ext-1) socket
Note: Picture state can be affected by scart cable quality.
6. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
7. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
8. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.
9. RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustrationin the following
pages.
10. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
11. HDMI-3: HDMI Input
12. HDMI 2: HDMI Input
13. HDMI 1: HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD Television is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player.
These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept
either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI connection.
When you use the wall mount kit (optional) with the LCD TV, we would definitely recommend to plug all your
cables into the back of the LCD before mounting to the wall.
English - 7 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 7
16.10.2009 10:21:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to
view all the channels that you subscribe to. For more information,
see “Conditional Access” section.
2. Side USB input.
Note: Codec update cannot be performed.
3. Side HDMI Input is for connecting a device that has an HDMI
socket.
4. Headphone jack is used for connecting an external headphone to
the system. Connect to the HEADPHONE jack to listen to the TV
from headphones (optional).
5. Video Input is used for connecting video signals of external
devices.Connect the video cable between the VIDEO IN socket
on the TV and the VIDEO OUT jack on your device.
6. Audio Inputs are used for connecting audio signals of external
devices. Connect the audio cable between the AUDIO INPUTS
on the TV and the AUDIO OUTPUT jacks on your device. Note: If
you connect a device to the TV via the VIDEO INPUT, you should
also connect your device with an audio cable to the AUDIO
INPUTS of the TV to enable audio.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
English - 8 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 8
16.10.2009 10:21:21
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Memory Connection
Power Connection
• Plug your USB device to the USB input of the TV.
IMPORTANT: The TV set is designed to operate on
IMPORTANT: The TV supports only FAT32 disk
formatting. NTFS format is not supported.
220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the
ambient room temperature before you connect the
set to the mains.
• It is recommended that you connect your USB
device directly to the USB input of the TV. Some
compatibility problems may occur if you use a
• Plug the power cable to the mains socket outlet.
separate cable connection.
Side HDMI Connection
You can use side HDMI input to connect a device that
has an HDMI connector to your TV. Use
Connecting the LCD TV to a PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
an appropriate HDMI cable to make such a connection.
Note that you should switch to HDMI-
• Power off both computer and display before making
any connections.
4 source to view the content from the connected
device. Power off both the TV and the device
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
before making any connections.
• Side HDMI Input supports connections between
HDMI devices such as DVD players. You can use
side HDMI input of the TV to connect to an external
HDMI device. Use an HDMI cable to connect.
• When the connection is made, switch to PC source.
See “Input selection” section.
•Settheresolutionthatsuitsyourviewingrequirements.
Resolution information can be found in the appendix
parts.
HDMI DEVICE
SIDE VIEW
A
u
d
i
o
P
C
I
n
p
u
t
I
n
p
u
t
s
P
C
a
u
d
i
o
c
a
b
l
e
P
C
R
G
B
c
a
b
l
e
(
n
o
t
s
u
p
p
l
i
e
d
)
(
n
o
t
s
u
p
p
l
i
e
d
)
Using Digital Multimedia
Connectors
t
o
A
U
D
I
O
I
N
P
U
T
S
t
o
P
C
i
n
p
u
t
o
n
t
h
e
T
V
• You can connect USB devices to your TV by using
the USB input of the TV. This feature allows you to
display/play JPG and MP3 files stored in a USB
stick.
• It is possible that certain types of USB devices (e.g.
MP3 Players) may not be compatible with this TV.
• You may back up your files before making any
connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
Connecting to a DVD Player
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
• Do not pull out USB module while playing a file.
CAUTION: Quickly plugging and unplugging USB
devices, is a very hazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This may cause physical damage to the USB
player and especially the USB device itself.
Note: Cables shown in the illustration are not
supplied.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
SIDE VIEW
USB MEMORY
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
English - 9 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 9
16.10.2009 10:21:25
Download from Www.Somanuals.com. All Manuals Search And Download.
When the connection is made, switch to YPbPr • For connecting a to a device that has SPDIF support,
source. See, “Input selection” section.
use an appropriate SPDIF cable to enable sound
connection.
• You may also connect through the SCART 1 or
SCART 2. Use a SCART cable as shown below.
E
x
t
e
r
n
a
l
S
p
e
a
k
e
r
s
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
A
d
e
v
i
c
e
t
h
s
a
t
s
u
p
p
o
r
t
C
o
m
p
o
n
e
n
t
C
o
m
p
o
n
e
n
t
S
P
D
I
F
s
i
g
n
a
l
.
a
u
d
i
o
v
i
d
e
o
S
c
a
r
t
s
o
c
k
e
t
s
H
D
M
I
i
n
p
u
t
s
i
n
p
u
t
s
i
n
p
u
t
s
D
V
D
P
l
a
y
e
r
Connecting Other Equipment via
Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCD TV by using the SCART sockets. Note that cables
shown in the illustration are not supplied.
REAR VIEW
Using Side AV Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
Power off both the TV and the devices before making
any connections.
• For connecting a camcorder, connect to the VIDEO
IN socket and theAUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section “Input selection”
in the following parts.
For more information, refer to your device’s own
instruction book.
S
c
a
r
t
s
o
c
k
e
t
s
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
H
e
a
d
p
h
o
n
e
C
a
m
c
o
r
d
e
r
D
e
c
o
d
e
r
D
V
D
R
e
c
o
r
d
e
r
V
i
d
e
o
R
e
c
o
r
d
e
r
Using Other Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• To connect external speakers, use an audio cable.
Do not reverse theAUDIO LEFT andAUDIO RIGHT
jacks. Turn on the LCD TV and external speaker set
after all connections are made. Refer to your speaker
set’s manual for further queries.
English - 10 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 10
16.10.2009 10:21:27
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Batteries in the
Remote Control Handset
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Press “SOURCE” button on your remote control for
directly changing sources.
or,
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“
” button to highlight an input and press “ ” button
to select.
Note: You can mark desired source options by
pressing the OK button. Therefore, when “SOURCE”
button is pressed, only the marked source options will
be available (except for the TV source).
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries.
Remote range is approximately 7m/23ft.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240V AC, 50
Hz.
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
• Press STANDBY switch. Then the standby LED
lights up.
Operation with the Buttons on the TV
Volume Setting
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
• Press “
” button to decrease volume or “
on the remote control.
” button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
• Press the -P/CH or P/CH+ button on the TV. The TV
will then switch on.
Programme Selection
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the • Press “P/CH +” button to select the next programme or
TV set, the programme that you were watching last
will be reselected.
“P/CH -” button to select the previous programme.
Viewing Main Menu
By either method the TV will switch on.
• Press “
” / “
” buttons at the same time
To Switch the TV Off
to view main menu. In the Main menu select sub-
menu using “P/CH -” or “P/CH +” buttons and enter
• Press the “ ” button on the remote control or
press the STANDBY switch, so the TV will switch
to standby mode.
the sub-menu using “
” or “
” buttons.
To learn the usage of the menus, refer to the menu
system sections.
• To power down the TV completely, unplug the
power cord from the mains socket.
AV Mode
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
English - 11 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 11
16.10.2009 10:21:29
Download from Www.Somanuals.com. All Manuals Search And Download.
If an active antenna is connected to your TV, you
can select this option as On. Antenna power should
be “Off” when standard antenna is used instead of
the active antenna. See Configuration Menu in the
following sections for more information.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press “V +” button to increase the volume. Press “V
-” button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• To select the “Yes” or “No” option, highlight the
item by using “ ” or “ ” buttons and press the OK
button.
• Press “P -” button to select the previous programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
The IDTV will automatically tune to the UHF or VHF
(** for EU countries) transmission channels, searching
for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about
a few minutes. To cancel searching, you can press the
“M” button at any time during the process.
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10 - 299 (for IDTV) or 10-199 (for analogue),
press the numeric buttons consecutively. The limit
of the delay time is 3 seconds.
• Press directly the programme number to reselect
single digit programmes.
Initial Settings
When the TV is turned on for the first time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
By pressing the “ ” or “ ” buttons highlight the
language you want to set and press OK button. After
then, “First time installation” OSD will appear on the
screen.
After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
By pressing “ ” or “ ” buttons, select the country To search for analogue channels, select “Yes”. TV
you want to set and press OK button. button (** for switches to the analogue TV mode. The menu below
EU countries).
is displayed to search for analogue channels:
Note: Country selection OSD will not be available
for UK.
After then, the active antenna selection OSD appears
on the screen:
By pressing “ ” or “ ” buttons, set active antenna
mode as on or off.
English - 12 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 12
16.10.2009 10:21:30
Download from Www.Somanuals.com. All Manuals Search And Download.
Select your Country, Language and Text language • Press EPG button to view the EPG menu.
by using “ ” or “ ” and “ ” or “ ” buttons. Press
• Electronic Programme Guide appears on the screen.
OK or RED button to continue. To cancel, press the
It is able to get Information of the channel - programs
BLUE button.
weekly by means of 7-DAY-EPG. All programs of
For more information on this process, see “Install
Menu” section.
channels are displayed. On the bottom of the screen;
info bar, showing all the available commands, will
be displayed.
Note: For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK only).
General Operation
Pressing the “TV/DTV” button at any time while
watching television programmes will switch the TV set
between the digital terrestrial television broadcasting
and its normal analogue broadcasting.
Information Banner
• Whenever you change channel, using the P- / P+
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen (available only in DTV
mode). This will remain on the screen for a few
seconds.
RED button (Shrink): makes the info boxes
smaller.
GREEN button (Expand): makes the info boxes
larger.
YELLOW button (Prev. Day): displays the
programmes of previous day.
• The information banner can also be displayed at any
time while watching TV by pressing the INFO button
on the remote control:
BLUE button (Next day): displays the programmes
of the next day.
INFO (Details): displays the programmes in detail.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
OK : views options for future programmes.
SWAP : jumps to the current boradcast.
• Press “0” button to view Guide Search menu. Using
this feature, you can search the programme guide
database in accordance with the genre selected or
with name match.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
Note: Searching process can be performed by the
desired date rate or by the channel basis.
If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
Displaying Subtitles
With digital terrestrial broadcasting (DVB-T), some
programmes are broadcast with subtitles.
Note: You can enable subtitles by pressing the
for UK) or GREEN (* for EU countries)buttons.
(**
Press the “M” button to display the main menu,
highlight the Setup and then Language menu using
“
” or “ ” button and press the OK button to display
Electronic Programme Guide
(EPG)
• Some, but not all, channels send information about
the current and next events.
the “Language settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use ” or “ button to set Subtitle to the
desired language.
• Please note that event information is updated
automatically. If there is no event information data
available in channels, EPG will be displayed with
blanks.
If “Subtitle” is on and a language option is set,
pressing the TELETEXT ( ) button causes the
English - 13 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 13
16.10.2009 10:21:31
Download from Www.Somanuals.com. All Manuals Search And Download.
following warning message display on the screen (* Press the “M” button. The menu below appears on
for UK only):
the screen:
Digital Teletext (** for UK only)
• Press the TELETEXT ( ) button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
The operation method may differ depending on the
contents of the digital teletext.
Channel List
Using the “ ” or “ ” button on the remote control,
make sure that the first item, Channel List, is
highlighted and press the OK button to display the
Channel List.
Follow the instructions displayed on digital teletext
screen.
• When Press “SELECT” button or similar message
appears on the screen, press the OK button.
Channel List is the place where the channels are
managed.
• When the TELETEXT ( ) button is pressed, the
TV returns to television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the TELETEXT ( ) button again,
the digital teletext screen will be displayed.
Navigating the Entire Channel List
Press “ ” or “ ” button for selecting the previous or
next channel. You can press P+ or P- button to move
page up or page down.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
To watch a specific channel, highlight it using “
”
or “ ” button and then press “OK” button, while the
“Select” item on Channel List menu is highlighted by
using “ ” or “ ” button.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the “SCREEN” button repeatedly
to select between to change zoom mode.
Then the name and number of the selected channel
will be displayed in the top-left and top-right of
the channel display at the top-right of the screen,
respectively.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
Moving the channels in the channel list
PLEASE NOTE: Menu size changes depending on
the chosen image size.
• Press “ ” or “ ” buttons to select the channel that
will be moved.
IDTV Menu System
The IDTV menu can only be viewed when watching
• Press “ ” or “ ” buttons to select the “Move” item
on Channel List menu.
digital terrestrial broadcasting. Press the “
” button to turn IDTV on while the TV is in analogue
mode.
English - 14 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 14
16.10.2009 10:21:33
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you enter the same programme number
of the channel that you want to move, “.... channel
services will be replaced. Do you want to continue?”
OSD will be displayed. Press OK to confirm or select
“No” to cancel.
Now pressing “ ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’ character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel that
will be deleted.
Press the “M” button to cancel the editing or OK button
to save the new name.
• Press “ ” or “ ” button to select the “Delete’’ item
on Channel List menu.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order to
lock a channel you should know the parental lock
password (default value is set to 0000 in the factory
and can only be changed from the Configuration
menu).
Select the channel to be locked by highlighting it and
select the Lock option by pressing “ ” or “ ” button.
When the OK button is pressed, a dialog OSD asking
for the password will be displayed.
Press the OK button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen:
Enter the password by using the numeric buttons on
Press “ ” or “ ” button to highlight the desired option.
If OK button is pressed while “Yes” is highlighted, the
highlighted channel is deleted. Selecting “No” cancels
the deletion.
the remote control. The lock icon “ ” will now be
displayed next to the selected channel. Repeat the
same operation to cancel the lock.
Setting Favourites
Renaming Channels
To set a favourite you should highlight the “Favourites”
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu appears
on the screen.
To rename a specific channel, the channel must
be highlighted by pressing “ ” or “ ” button. Then
highlight the Edit Name item by pressing “ ” or “
” button as illustrated below. Press the OK button to
activate the rename feature.
English - 15 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 15
16.10.2009 10:21:34
Download from Www.Somanuals.com. All Manuals Search And Download.
Date: Starting date is entered via the Left/Right or the
numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Duration: Duration between Start and End time.
Repeat: You can set a timer to be repeated as Once,
Daily or Weekly.
Change/Delete: permits or prohibits any modifications
for other users.
How to Add a Channel to a Favourites List
• By pressing “ ” or “ ” buttons, highlight the channel
that you want to add to the favourite list.
You can save the adjustments by pressing the GREEN
key or cancel the process by pressing the RED button.
You can edit the list via GREEN key and delete with
the RED button.
• By pressing OK button, the highlighted channel is
added to the Favourite List.
• F icon indicates that a channel is added to Favourite
List.
Conditional Access
• Press the M button to display the main menu and use
the “ ” or “ ” button to highlight the “Conditional
Access” line and press the OK button:
Removing a Channel from Favourite List
• Highlight the channel that you want to remove from
the favourite list and press OK button to remove.You
can press OK button again to re-add a channel.
• To activate Favourites, go to the Configuration menu
and select Favourite mode. Use “ ” / “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
On Screen Help
For all menus, press the INFO/
button to display
the help information about the menu functions.
Program Guide
Some Digital Terrestrial channels operate on a Pay
This section is same with the instructions given in Per View basis. These require a subscription and a
the General Operations page. Please see Electronic hardware decoder.
Programme Guide (EPG) section in the General
Operations part.
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
Timers
• Switch off the TV and unplug from the mains.
• Insert the CAM and then the viewing card to the slot
that is located in the terminal cover at the left-hand
side of the TV (from front view).
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
To display timers window, activate the item from the
main menu. To add a timer, press the YELLOW button
on the remote control. Then “Add Timer” window
appears.
• Some CAMs may require the following set up. Please
set the CAM by entering the IDTV menu, Conditional
Access then pressing the OK button. (CAM set up
menu is not displayed when it is not required.)
Channel: “ ” or “ ” keys will navigate the user
through the TV or Radio list.
English - 16 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 16
16.10.2009 10:21:35
Download from Www.Somanuals.com. All Manuals Search And Download.
• To see the viewing contract information: enter IDTV;
press the “M” button, then highlight Conditional
Access and press the OK button.
• When no module is inserted, “No Conditional
Access module detected” message appears on
the screen.
• Refer to the module instruction manual for details
of the settings.
NOTE: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.
AC3 Audio (* for EU countries only)
TV Setup
In the Configuration Menu, highlight the AC3 Audio
You can use this item to display the TV functions.
item by pressing “ ” or “ ” buttons. Use the “ ” or
The digital TV Setup menu screen is accessed from
the main menu. Press the “M” button to display the
main menu and use “ ” or “ ” button to highlight
“TV Setup”, press the OK button to display TV Setup
menu screen.
“
” buttons to set the AC3 Audio as On or Off.
If the channel that you are watching supports AC3
Audio, turn this setting on.
Hard of Hearing (* for EU countries only)
Use “ ” or “ ” button to select Hard of Hearing and
then press “ ” or “ ” button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press “ ” / “ ” button to set this function as
on or off.
Channel List
You can find detailed information for all menu items
Use “ ” or “ ” buttons to go to Channel List option.
Use “ ” or “ ” buttons to toggle Channel List Mode.
If you select “TV Only”, with the “ ” or “ ” buttons,
you navigate through only TV channels. If you select
“Radio Only”, with the “ ” or “ ” buttons, you navigate
through only radio channels. If you select “Text Only”,
with the “ ” or “ ” buttons, you navigate through only
text channels. To save the recent changes and exit;
press the “M” button.
in “Analogue TV Menu System” section.
Setup
The adjustments in this menu are given as the
following:
Active Antenna
Use “ ” or “ ” buttons to highlight Active Antenna
option.
When antenna power option is set as On by pressing
Configuration
“
” or “ ” button, +5V will be transmitted to the
You can configure the settings of your TV. Select
Configuration from Setup menu and press OK to view
this menu. Press the RETURN button on the remote
control to exit.
antenna output.
This feature enables the use of active antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Scan Encrypted (**)
(**) For UK only.
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
setting is on, search process will locate the encrypted
English - 17 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 17
16.10.2009 10:21:36
Download from Www.Somanuals.com. All Manuals Search And Download.
channels as well. If it is set as OFF manually, encrypted Parental Control
channels will not be located while in automatic search
or manual search.
Use “ ” or “ ” buttons to go to Parental Lock option.
Press OK button to enter the menu. A dialog box
Use “ ” or “ ” button to select Scan Encrypted and asking for the lock key will be displayed. The key is set
then press “ ” or “ ” button to set this setting as to “0000” initially. Enter PIN. If it is incorrect, “Wrong
On or Off.
Pin” OSD will be displayed. If it is correct, the Parental
Control menu will be displayed:
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most update
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically powers
up at 3.00 A.M. each day and searches for any new
information which may be broadcast and will download
this to your receiver automatically. This operation will
normally take approximately 30 minutes. If you have
an important recording to be carried out at 3.00 A.M.
and you do not want to interrupt it, disable auto OAD
search by performing the following:
Maturity Lock (**)
(**) If you set Country option as UK in the first time
installation, Maturity Lock option will not be visible.
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
does not show video-audio.
Menu Lock
In menu lock you can set locking for all menus, or the
Installation Menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system. Use “ ” or “ ” buttons to go to
Menu Lock option. Use “ ” or “ ” buttons to choose
Menu Lock Mode.
• Press “M” button and using the “ ” or “ ” buttons
to choose Setup and press the OK button.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with
the correct lock key. So the user cannot add, delete,
rename, channels, cannot set timers.
• Highlight Configuration menu with “ ” or “ ” keys
and press OK.
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.
INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels. Changes will be
updated after exiting ‘Configuration Menu’.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option. Press
OK to display the “Set PIN” window. Use numeric
buttons to enter new pin number you will need to
input your new pin a second time for verification
purposes. The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
• Using the“ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with
“
” or “ ” keys and pres OK to commence
upgrade.
•After the search progress is completed, the message
“ Completed searching for upgrade. No new software
was found” appears on the screen if no new software
is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording by
repeating the above instructions but this time
selecting ENABLE.
Time Settings (**)
(**) If you set Country option as UK in the first time
installation, Time Settings option will not be visible.
Note: Your TV may start in First Time Installation mode
after OAD update.
In the configuration menu, highlight the Time Settings
item by pressing “ ” or “ ” buttons. Press OK and
Time Settings sub menu will be displayed on the
English - 18 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 18
16.10.2009 10:21:38
Download from Www.Somanuals.com. All Manuals Search And Download.
screen. Current Time,Time Zone Setting and Time
Zone will be available.
Use “ ” or “ ” buttons to highlight the Time Zone
Setting. Time Zone Setting is set using “ ” or “
”
buttons. It can be set to AUTO or MANUAL. When
AUTO is selected, Current Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone Setting, Time
Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to
the selected Time Zone.
Audio Description (Optional)
Menu: shows the language of the system
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media. You can use this feature, only if the broadcaster
supports that additional narration track. Use “ ” or
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
“
” buttons to select an item. Then use “ ” or “
”
• Audio: by pressing “ ” or “ ” keys change the
audio language.
buttons to set.
• Subtitle: alter the subtitle language with “ ” or “
” keys. The chosen language will be seen in
subtitles.
• Guide: By pressing “ ” or “ ” buttons change the
guide language.
Audio Description (Optional)
Current
This function enables or disables the audio description
feature by pressing the “ ” or “ ” buttons.
• Audio: if audio language is supported change the
audio language by pressing “ ” or “ ” buttons
Preferred Language (Optional)
• Subtitle: if subtitle is backed up, alter the subtitle
language with “ ” or “ ” buttons. The chosen
language will be seen in subtitles.
By pressing the “ ” or “ ” buttons the preferred audio
description language is being changed.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
This setting can be used, only if it is available.
Relative Volume (Optional)
Using this option, the Audio Description volume level
can be increased or decrased relatively, according to
the general volume.
Language Settings
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use “ ” or “ ” button to select Standby Search and
then press “ ” or “ ” button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Language
In the configuration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
OK and Language Settings submenu will be displayed
on the screen:
In this menu the user can adjust the preferred
language. Language is changed by pressing OK
button.
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
English - 19 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 19
16.10.2009 10:21:39
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
• System Language determines the on-screen menu
language.
•Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Installation
The Installation menu is mainly intended to help you
for creating a Channel Table in the most efficient way.
Select Installation from the Configuration menu by
pressing “ ” or “ ” buttons.
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
OK or RED button to continue. To cancel, press BLUE
button. The following menu will be displayed during
the automatic tuning:
Automatic Channel Scan
AfterAPS is finalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
If you do not accept the locations and/or the
programme names, you can change them via the
program table.
Manual Channel Scan
Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to confirm.
In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For every valid channel number,
signal level and signal quality are shown on the
screen.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “ ” or
Press the OK button to search for analogue channels.
The following menu appears on the screen for
analogue channel search:
“
” button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
Press OK to cancel. Select Yes by pressing “ ” or “
button and press OK to delete all of the channels.
”
English - 20 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 20
16.10.2009 10:21:41
Download from Www.Somanuals.com. All Manuals Search And Download.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time
Installation” menu item and press OK button, then
you will be asked whether or not to delete the settings.
Selecting “Yes” by pressing OK button while the “Yes”
is highlighted will delete the existing channel table.
Select YES by pressing “ ” or “ ” button and press
OK button. Media browser will be displayed.
Then you will be asked to confirm for deleting all
channels and settings:
By selecting Yes and pressing the OK button, the
existing channel table will be deleted.
After factory settings are loaded, “First Time
Installation” menu will be displayed.
• You can play music, picture and video files from a
USB memory stick.
The menu which is displayed for language selection
Note: If you plug USB stick while in analogue mode,
the TV will automatically switch to digital TV mode.
appears on the screen at first. By using “ ” or “
”
buttons, select the desired language option, and press
OK button to activate.
Note: Some USB compliant devices may not be
supported.
After then, “First time installation” OSD will appear on
the screen. By pressing “ ” or “ ” buttons, select the
Country you want to set and press OK button (* only
for EU countries).
Note: If the USB stick is not recognized after power
off/on or First Time Installation, first, plug the USB
device out and power off/on the TV set. Plug the USB
device in again.
- Next, active antenna mode selection OSD will appear
on the screen.Use “ ” or “ ” to set and press OK
to continue.See the section, “Initial Settings” for
more information.
Playing MP3 Files
After active antenna mode option is selected, a
message asking for automatic search appears on
the screen:
Press the OK button to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen: This process is same as described in
Automatic Search section.
Play This (OK button) : Plays the selected file.
Play (Green button) : Plays all media files in the folder
starting with the selected one.
Pause (Yellow button) : Pause playing file.
Media Browser
Stop (Red button) : Stop the playing file.
• To display Media Browser window, press either “M”
button on the remote control and then select Media
Browser by pressing “ ” or “ ” button. Press OK
Previous/Next (Left/Right buttons) : Jumps to previous
or next file to play.
button to continue. Media Browser menu contents Shuffle (INFO button) : Plays the files randomly. If
(depending on the contents of your USB drive) will shuffle mode is enabled, previous/next function will
be displayed.
• Also, when you plug a USB device, the following Loop (Blue button) : Plays the selected file
screen will be displayed:
repeatedly.
also jump to the tracks randomly.
English - 21 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 21
16.10.2009 10:21:43
Download from Www.Somanuals.com. All Manuals Search And Download.
• You can set subtitles by using OK button before
starting the playback or by using M button during
the playback.
Viewing JPG Files
Press RETURN (Exit) button to switch back to
previous menu.
Note: PIP/PAP mode is not available while in Media
Browser mode.
Analogue TV Menu System
Picture Menu
Jump (Numeric buttons) : jump to selected file using
the numeric buttons.
OK : views the selected picture in full screen.
Play / Slideshow (Green button) : starts the slideshow
with all pictures in the folder.
Slideshow Options
Mode
Pause (Yellow button) : Pause the slideshow.
For your viewing requirements, you can set the related
mode option.
Continue (Green button) : Continue with the
slideshow.
Press “ ” or “ ” button to select Mode. Press “
” or “ ” button to choose from one of these options:
Cinema, Dynamic and Natural.
Previous/Next (Left/Right buttons) : Jump to previous
or next file of slideshow.
Rotate (Up/Down buttons) : Rotate the picture using Brightness/Contrast/Colour/Sharpness/
up/down buttons.
Hue
RETURN (Exit) : Back to file list.
Shuffle (Red button) : Shows the files randomly and
Press “ ” or “ ” button to select the desired option.
Press “ ” or “ ” button to set the level.
Note: Hue option can only be visible when the TV
continuous in current folder and
icon turns the
receives an NTSC signal.
highlighted icon. If during a slideshow the shuffle mode
is enabled, the next pictures will be choosen randomly
(If the loop function is not enabled, the slideshow will
stop at the end. If the loop function is enabled, after
the slideshow ends, it will start again and again).
Colour Temp
Press “ ” or “ ” button to select Colour Temp. Press
“
” or “ ” to choose from one of these options: Cool,
Normal and Warm.
Loop (Blue button) : Slideshow goes on continuously
Note:
and
icon turns the highlighted icon.
• Setting Cool option gives white colours a slight
blue stress.
Info : Activates the operations bar.
Video Playback
• Setting Warm option gives white colours a slight
Play (Red button) : Starts the video playback.
Stop (Blue button) : Stops the video playback.
Pause (OK button) : Pause the video playback.
Rewind (Cursor Left) : Goes backward.
Forward (Cursor Right) : Goes forward.
Menu (M button) : Sets subtitle/Audio.
red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
English - 22 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 22
16.10.2009 10:21:44
Download from Www.Somanuals.com. All Manuals Search And Download.
Press “ ” or “ ” button to select Noise Reduction.
Press “ ” or “ ” to choose from one of these options:
Low, Medium, High or Off.
Sound Menu
Film Mode
Films are recorded at a different number of frames per
second to normal television programmes.
Press “ ” or “ ” button to select Film Mode.
Press “ ” or “ ” button to set this feature On or Off.
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
Game Mode
Select Game Mode by pressing “ ” or “ ” button.
Use “ ” or “ ” button to set Game Mode as On or
Off. When Game Mode is set to On, specific game
mode settings, which are optimized for better video
quality, will be loaded.
Volume
Also; Picture Mode, Contrast, Brightness, Sharpness,
Colour and Colour Temp settings will be invisible and
disabled while Game Mode is on.
Press “ ” or “ ” button to select Volume. Press “
or “ ” button to change the level of the Volume.
”
Equalizer
Note:
Press “ ” or “ ” button to select Equalizer. Press “
Picture mode selection button on the remote control
will have no function while Game Mode is on.
” button to view equalizer menu.
If the TV is switched to PIP/PAP mode, Game Mode
setting will be disabled and be removed from the
Picture menu.
Picture Zoom
Select Picture Zoom by pressing “ ” or “
”
button.
Use “ ” or “ ” buttons, to change picture zoom to
Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Subtitle
or Zoom.
Reset
Press “ ” or “ ” button to select Reset. Press
“
” or “ ” or OK button to reset the picture modes to
factory default settings.
Press “ ” or “ ” button to change the preset. In
equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User.
Store
Press “ ” or “ ” button to select Store. Press “
”
or OK button to store the settings. “Stored...” will be
Select the desired frequency by pressing “ ” or “
”
displayed on the screen.
button and increase or decrease the frequency gain
by pressing “ ” or “ ” button.
Press the “M” button to return to the previous menu.
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User.
Balance
This setting is used for emphasizing left or right
speaker balance.
Press “ ” or “ ” button to select Balance. Press “
” or “ ” button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
English - 23 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 23
16.10.2009 10:21:45
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphone
Feature Menu
Press “ ” or “ ” button to select Headphone. Press
“
” button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press “ ” or “ ” button to select Volume. Press “
” button to increase headphone volume level. Press
“
” button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63.
Headphone Sound (optional)
Press “ ” or “ ” button to select Headphone Sound.
Using “ ” or “ ” button, you can select Main, PIP/PAP,
Active or Inactive.
Main
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
: Main window sound.
Pip-Pap
In the Feature menu, highlight PIP item by pressing
“
” or “ ” buttons. Press “ ” button to enter PIP
Inactive : Sound of the currently inactive window.
Sound Mode (optional)
submenu:
Press “ ” or “ ” button to select Sound Mode. Using
“
” or “ ” button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain fixed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press “ ” or “ ” button to select AVL. Press “ ” or
“
” button to set the AVL as On or Off.
Spdif Out
Press “ ” or “ ” button to select Spdif Out. Press “
” or “ ” button to set the Spdif Out. as On or Off.
Note: If Spdif Out is set to On, headphone will be Using “ ” or “ ” button, you can switch to PIP, PAP
disabled.
mode or turn off the feature.
If the TV is switched to PIP or PAP mode, Pip-Pap
submenu will change accordingly and the following
settings will appear on the same menu screen.
SRS TruSurr XT (optional)
By pressing “ ” or “ ” select SRS TruSurr XT.
Press “ ” or “ ” button to set SRS TruSurr XT as
on or off.
Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
Pip-Pap
Store
This line controls Pip/Pap modes. Use “ ” or “
”
Press “ ” or “ ” button to select Store. Press “
” or OK button to store the settings. “Stored...” will
be displayed on the screen.
buttons to switch the TV to Pip, Pap or Off.
Pip Size
Using this setting, you can set the size of the Pip
window. Press “ ” or “ ” button to highlight Pip
Size item. Use “ ” or “ ” button to set Pip Size to
Small or Large.
English - 24 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 24
16.10.2009 10:21:47
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: This setting will be inactive if the TV is set to
Pap mode.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
PIP Position
This setting is used for moving the sub picture.
Select PIP Position item by using “ ” or
By pressing “ ” or “ ” button, select Blue
Background. Press “ ” or “ ” button to set Blue
Background as On or Off.
“
” button. Use “ ” or “ ” button to adjust PIP
position.
Menu Background
Positions available are: Bottom Right,Bottom Left, Top
Left and Top Right.
Press “ ” or “ ” button to select Menu Background.
You can set menu background level by pressing “
” or “ ” button.
Source
PIP Source setting enables you to select the source
of the sub picture.
Backlight
Select PIP Source item by using “ ” or “
button. Use “ ” or “ ” button to set PIP source.
”
This setting controls the backlight level. Select
Backlight by pressing “ ” or “ ” button. Press“
” or “ ” button to set Backlight to Auto, Medium,
Maximum or Minimum.
Program
This setting will be unavailable to be used.
Menu Timeout
Swap
To set a specific display timeout for menu screens,
set a value for this option.
Select Swap item by using “ ” or “ ” button. Use “
” or “ ” button to set. This function enables to swap
between the main and the PIP picture.
Press “ ” or “ ” button to select Menu Timeout. Use
“
” or “ ” button to change menu timeout to 15 sec,
Note: See Appendix E for all PIP/PAP modes.
Sleep Timer
30 sec or 60 sec.
Teletext Language
Press “ ” or “ ” button to select Sleep Timer. Use
Press “ ” or “ ” button to select Teletext Language.
Use “ ” or “ ” button to change Teletext Language to
West, East, Turk/Gre, Cyrillic, Arabic or Persian.
“
” or “ ” button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
Ext Out
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Press “ ” or “ ” button to select Ext Out. Use “ ” or
“
” button to set the Ext Out as On or Off.
Child Lock
Note:
Press “ ” or “ ” button to select Child Lock.
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Use “ ” or “ ” button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control handset. In this case the control
panel buttons (except for the STANDBY button) will
not work.
HDMI PC Full Mode (optional)
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
Hence, if one of those buttons is pressed, Child Lock
On will be displayed on the screen when the menu
screen is not visible.
Note: If you connect an HDMI device and switch the
TV to HDMI mode, this feature will be visible (except
for 1080i/1080P resolution).
Language
Press “ ” or “ ” button to select Language. Use “
” or “ ” button to select the Language.
Full Mode (optional)
Default Zoom
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080P resolutions, Full Mode item will
be visible.You can set Full Mode as 1:1 or Normal
by using “ ” or “ ”.If you select 1:1, screen ratio will
be adjusted correctly. If you set Normal, screen ratio
may expand.
While zoom mode is set as AUTO, the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to
adopt. Press “ ” or “ ” button to select Default
Zoom. You can set Default Zoom to Panoramic,
16:9, 4:3 or 14:9 by pressing “ ” or “ ” button.
English - 25 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 25
16.10.2009 10:21:49
Download from Www.Somanuals.com. All Manuals Search And Download.
Install Menu
Install Menu in AV Modes
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Program
Press “ ” or “ ” button to select Program. Use “
”
or “ ” button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Colour System
Press “ ” or “ ” button to select Colour System. Use
Band
“
” or “ ” button to change the colour system to PAL,
Band can be selected either C or S. Press “ ” or “
” button to set Band.
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
Store
Channel
Press “ ” or “ ” button to select Store Program.
Press “ ” or OK button to store the settings.
“Stored...” will be displayed on the screen.
Channel can be changed by “ ” or “ ” button or
numeric buttons.
Colour System
Program Table
Press “ ” or “ ” button to select Colour System. Use
Select Program Table by pressing “ ” or “
button.
”
“
” or “ ” button to change the colour system to PAL,
PAL 60, SECAM or AUTO.
Sound System
Press “ ” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound system
to BG,DK, I, L or L’.
Fine Tune
Press “ ” or “ ” button to select Fine Tune. Press “
” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “
”
or “ ” button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except for the
AV modes). By cursor action, programme selection is
done automatically.
Store
Press “ ” or “ ” button to select Store. Press “
”
or OK button to store the settings. “Stored...” will be
displayed on the screen.
English - 26 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 26
16.10.2009 10:21:51
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Source Menu
To change the name of a programme, select the
programme and press the RED button.
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu appears
on the screen:
The first letter of the selected name will be highlighted.
Press “ ” or “ ” button to change that letter and “
”
or “ ” button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to insert by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
In source menu, highlight a source by pressing “
”
or “ ” button and switch to that mode by pressing “
” button. Source options are; TV, DTV/USB, EXT-1,
EXT-2, FAV, HDMI-1, HDMI-2, HDMI-3, HDMI-4, YPbPr
or PC-VGA.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
Note: Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
PC Mode Menu System
See “Connecting the LCD TV to a PC” section for
connecting a PC to the TV set.
For switching to PC source, press “SOURCE” button
on your remote control and select PC input. You can
also use “Source” menu to switch to PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.
PC Position Menu
Select the first icon by pressing “ ” or
“
” button. PC Position menu appears on the screen:
Country
Press “ ” or “ ” button to select your country. If you
want to exit from A.P.S. function, press the BLUE
button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
Whenever you press the BLUE button, APS function
stops and Program Table appears on the screen.
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
If you wait until the end of APS, Program Table will be
displayed with the programmes found and located.
English - 27 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 27
16.10.2009 10:21:53
Download from Www.Somanuals.com. All Manuals Search And Download.
into correct place automatically. This setting therefore
automatically optimizes the display.
Mute Function
Press “ ” button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
Select Autoposition item by using “ ” or “ ” buttons.
Press OK or “ ”, “ ” button.
To cancel mute, there are two alternatives; the first
one is pressing the “ ” button and the second one
is increasing the volume level.
Warning: Please ensure auto adjustment is performed
with a full screen image to ensure best results.
H (Horizontal) Position
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Select H Position item by using “ ” or “ ” button. Use
Press the “
PIP mode.
/
” button once to switch to
“
” or “ ” button to adjust the value.
V (Vertical) Position
At PIP Mode, a small picture (PIP picture) is
This item shifts the image vertically towards the top displayed on the main picture. There are 1
or bottom of the screen.
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window.
Select V Position item by using “ ” or “
” button. Use “ ” or “ ” button to adjust
the value.
When PIP Mode is entered, the default active
window is the PIP window and the active window
is indicated by a yellow frame around it. The
active window can be changed by pressing
“ ” or “ ” button. The status info OSD belongs
to active window. The place of the status OSDs
are same for both windows.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using “ ” or “ ” buttons. Use
“
” or “ ” button to adjust the value.
Press the “
PAP mode.
/
” button again to activate
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
At PAP Mode, two pictures with equal sizes are
displayed on the screen. Aspect Ratios of the
windows are fixed.
When you switch to PAP Mode, main window in
PAP Mode will be displayed on the right side of
the screen. The active window can be changed
by pressing “ ” or “ ” button.
Select Dot Clock item by using “ ” or “ ” buttons. Use
“
” or “ ” button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press the “
mode.
/
” button again to exit the PAP
Press “ ” or “ ” button to select the second icon. PC
Picture menu appears on the screen.
Picture Mode Selection
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical to
settings defined in TV picture menu under “Analogue
TV Menu System”.
By pressing PRESET button, you can change Picture
Mode settings in accordance with your viewing
requirements.Available options are Dynamic, Natural
and Cinema.
Note: If you set Colour Temp as User, you can define
R, G, B settings manually.
Freezing Picture
Sound, Feature and Source settings are identical
to the settings explained in Analog TV menu
system.
You can freeze the picture on the screen by pressing
the “OK” button on the remote control. Press the
“OK” button to freeze picture. Press again to quit
freeze mode.
Displaying TV Information
Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
Zoom Modes
You can change the aspect ratio (image size)
of the TV for viewing the picture in different
zoom modes.
“INFO/
” button is pressed.
English - 28 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 28
16.10.2009 10:21:54
Download from Www.Somanuals.com. All Manuals Search And Download.
Press “SCREEN” button to directly change the zoom
mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
Cinema
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
In PC mode, only 16:9 mode is available.
Auto
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
Subtitle
• When the AUTO mode does not function correctly This zooms up the wide picture (16:9 aspect ratio)
due to poor WSS signal quality or when you want to with subtitles to the full screen.
change the ZOOM mode, change to another ZOOM
mode manually.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
Zoom
This option zooms to the picture.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
Note: You can shift to screen up or down by pressing
“
” / “ ” buttons while picture zoom is selected as
panaromic, 14:9, Cinema or Subtitle.
4:3
Teletext
Use to view a normal picture (4:3 aspect ratio) as this
is its original size.
Teletext system transmits information such as news,
sports and weather on your TV. Note that is the signal
degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
Teletext function buttons are listed below:
Panoramic
“
” Teletext / Mix / PAT Mode
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
Activates teletext mode when pressed once.
Press again to place the teletext screen over the
programme (mix). Pressing this button again will
split the screen into two windows, one displaying the
teletext and the other displaying the current channel.
Pressing again will quit the teletext mode.
“RETURN” Index
Selects the teletext index page.
“SCREEN” Expand
The top and bottom of the picture are slightly cut off.
14:9
Press once to enlarge top half of the page, press again
to enlarge the bottom half of the page. Press again to
revert back to normal size.
This zooms up the wide picture (14:9 aspect ratio) to the
upper and lower limits of the screen.
English - 29 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 29
16.10.2009 10:21:56
Download from Www.Somanuals.com. All Manuals Search And Download.
Poor Picture
“
” Reveal
Have you selected the correct TV system? Is your TV
set or house aerial located too close to a non-earthed
audio equipment or neon lights, etc.?
Shows hidden information (e.g. solutions of games).
“OK” Hold
Holds a text page when convenient. Press again to
resume.
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the
aerial.
“
” Subcode Pages
Selects subcode pages if available when the teletext
is activated.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune
the channels.
P+ / P- and numbers (0-9)
Press to select a page.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
Note: Most TV stations use code 100 for their index
pages.
Coloured Buttons
No Picture
(RED/GREEN/YELLOW/BLUE)
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
cable damaged? Are suitable plugs used to connect
the aerial? If you are in doubt, consult your dealer.
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.
No Picture means that your TV is not receiving a
transmission. Have you selected the correct button
on the remote control? Try once more.
When FASTEXT system is available, sections in
a teletext page will become colour-coded and can
be selected by pressing the coloured buttons.
Press a coloured button that corresponds to
with your needs.
Also make sure the correct input source has been
selected.
Sound
The coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing “ ” or “ ” commands will
request the next or previous page respectively.
You can not hear any sound. Did you perhaps interrupt
the sound, pressing the
button?
Sound is coming from only one of the speakers. Is the
balance set to one extreme? See Sound Menu.
Tips
Screen Care
Remote Control
Your TV no longer responds to the remote control.
Perhaps the batteries are exhausted. If so you can still
use the local buttons at the bottom of the TV.
Clean the screen with a slightly damp, soft cloth. Do
not use abrasive solvents as they may damage the
coating layer of the TV screen.
Input Sources
For your safety, unplug the mains plug when cleaning
the set. When moving the TV, hold it properly from
the bottom part.
If you cannot select an input source, it is possible that
no device is connected.
Image Persistence
Check theAV cables and connections if you have tried
to connect a device.
Please note that ghosting may occur while displaying
a persistent image. LCD TVs’ image persistence may
disappear after a short time. Try turning off the TV
for a while.
To avoid this, do not leave the screen in still picture
for extended periods.
No Power
If your TV system has no power, please check the
main power cable and connection to the mains
socket outlet.
English - 30 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 30
16.10.2009 10:21:57
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: PC Input Typical
Display Modes
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)
The display has a maximum resolution of 1920 x
1200. The following table is an illustration of some of
the typical video display modes.
Source
Supported Signals Available
PAL 50/60
NTSC 60
RGB 50
O
O
O
O
O
O
X
Your TV may not support different resolutions.
Supported resolution modes are listed below.
EXT-1
(SCART
1)
If you switch your PC to an unsupported mode, a
warning OSD will appear on the screen.
RGB 60
PAL 50/60
NTSC 60
RGB 50
Note: Resolution modes indicated with (*) are not
available for PIP/PAP modes.
EXT-2
(SCART-2)
Resolution
Frequency
RGB 60
X
Index
Standard
Hor
Hor
Ver
Ver (Hz)
PAL 50/60
NTSC 60
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
(KHz)
37.9
37.9
31.5
31.5
35.0
37.9
37.5
43.3
35.2
37.9
43.8
48.1
46.9
53.7
49.7
FAV
1
2
640
640
640
640
640
640
640
640
800
800
800
800
800
800
832
350
400
400
480
480
480
480
480
600
600
600
600
600
600
624
85
85
70
60
66
72
75
85
56
60
70
72
75
85
75
VESA
VESA
IBM VGA
VESA
MAC
480I
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
24 HZ
3
4
480P
576I
5
6
VESA
VESA
VESA
VESA
VESA
7
576P
720P
720P
1080I
1080I
1080P
1080P
480I
8
9
YPbPr
10
11
12
13
14
15
VESA
VESA
VESA
MAC
VESA
(interlace)
16
1024
768
43
35.5
17
18*
19*
20*
21*
22
1024
1024
1024
1024
1024
1152
1152
1152
1152
1152
1280
1360
1280
1280
1280
1280
1280
1280
1280
1400
1400
1440
1440
1600
1680
1920
768
768
60
70
72
75
85
60
70
75
85
75
60
60
75
60
75
85
60
75
85
60
75
60
75
60
60
60
48.4
56.5
57.7
60.0
68.3
53.8
64.2
67.5
77.1
68.9
47.7
47.7
60.2
60.0
75.0
85.9
64.0
80.0
91.1
65.3
82.3
55.9
70.6
75.0
65.3
74.5
VESA
VESA
480P
576I
768
768
576P
720P
720P
1080I
1080I
1080P
1080P
1080P
768
HDMI1
HDMI2
864
23*
24*
25*
26*
27
864
VESA
VESA
VESA
MAC
HDMI3
HDMI4
864
864
870
768
VESA
28
768
29*
30
768
VESA
VESA
VESA
VESA
VESA
VESA
VESA
960
31*
32*
33
960
960
1024
1024
1024
1050
1050
900
(X: Not Available, O: Available)
34*
35*
36
Note: In some cases a signal on the LCD TV may
not be displayed properly. The problem may be
an inconsistency with standards from the source
equipment (DVD, Set-top box, etc.). If you do
expereince such a problem please contact your dealer
and also the manufacturer of the source equipment.
37*
38
39*
40*
41
900
1200
1050
1200
VESA
42*
English - 31 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 31
16.10.2009 10:21:57
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C: Supported DVI Resolutions
When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer
to the following resolution information.
24Hz
25Hz
30Hz
50Hz
60Hz
480i
480p
576i
;
;
;
;
;
;
;
576p
720p
1080i
1080p
;
;
;
;
;
;
Appendix D: PIP/PAP Mode Combinations
PC-
VGA
MAIN
TV
TV
DTV/USB Scart1 Scart2
FAV
HDMI1 HDMI2 HDMI3 HDMI4 YPbPr
9
8
8
8
8
8
8
9
9
9
9
9
8
9
9
9
9
9
8
9
9
9
9
9
8
9
9
9
9
9
8
9
9
9
9
9
9
9
9
9
8
9
9
9
9
9
9
9
9
9
9
8
(RGB)
DTV/USB
Scart1
Scart2
FAV
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
8
(RGB)
(RGB) (RGB)
9
8
8
8
8
8
8
(RGB)
9
(RGB)
HDMI1
HDMI2
HDMI3
HDMI4
YPbPr
PC-VGA
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
(RGB): This indicates that, selection is possible only if Scart-1 has a RGB signal.
Restrictions: Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2, FAV.
If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source can not
be switched to the Scart-1 source.
If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source can not be
switched to TV, Scart-2 and FAV sources.
English - 32 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 32
16.10.2009 10:21:58
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E: Supported File Formats for USB Mode
Format
Audio
MPEG1 MPEG Layer 1/2/3
Remarks
File
Extension
Media
Video
(Maximum resolution/Bit rate etc.)
60 Hz (frame refresh rate).
60 Hz (frame refresh rate).
Up to 640 x 480.
.mpg/ .dat/
.vob
MPEG2
MPEG4
MS ISO
MPEG4
MPEG2
PCM/MP3
Movie
PCM/MP3
Support SP and ASP
.avi
--
MJPEG
--
PCM
PCM
30fps@VGA
Sample Rate: 8K ~ 48KHz
MPEG 1/2
Music
Photo
Sample Rate: 8K ~ 48KHz, Bit Rate:
32K~320Kbps
.mp3
--
Layer 1/ 2/
3 (MP3)
WxH = 14592x12288, Up to 179 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale
Baseline
JPEG
.jpg
Up to 4 Mega-pixel
Progressive
JPEG
Support format: 444/ 440/ 422/ 420/ Grayscale
.gif
.bmp
.srt
.smi
.sub
GIF
bit map
WxH = 14592x12288, Up to 179 Mega-pixel
WxH = 14592x12288, Up to 179 Mega-pixel
External
Subtitles
Support Text File Format, but do not support
Picture File Format
Note: Necessary bitrates for some video types are higher than USB limits. For this reason, some video types
cannot be played.
Information for Users on Disposal of Old Equipment and
Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Battery
Notice: The sign Pb below the symbol for batteries indicates that
this battery contains lead.
Products
English - 33 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 33
16.10.2009 10:21:59
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1
for UK
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Digital
Reception
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
NUMBER OF PRESET CHANNELS
200
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50 Hz.
AUDIO
SRS TruSurround XT
AUDIO OUTPUT POWER (WRMS.) (10% THD)
2 x 8
POWER CONSUMPTION (W)
250 W (max)
< 250mW (Standby)
PANEL
16:9 display, 46” Screen Size
DIMENSIONS (mm)
DxLxH (With foot): 296 x 1129 x 766
Weight (Kg): 33
DxLxH (Without foot): 110 x 1129 x 716
Weight (Kg): 28
English - 34 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 34
16.10.2009 10:22:00
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Instruction
For your own safety read following instruction carefully before attempting to connect this unit to
the mains supply.
MAINS (AC) OPERATION
The wires in the mains lead are coloured in accordance with the following code :
GREEN
FUSE
&
YELLOW
(Earth)
(if there is
earth cable)
BROWN
(Live)
BLUE
(Neutral)
IMPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
The Green and Yellow coloured wire must be connected to the terminal which is
marked with the letter E, or by the earth symbol, or with Green or Green and Yellow
colors.
The Blue or Black coloured wire must be connected to the terminal which is marked
with the letter N or black colour.
The Brown or Red coloured wire must be connected to the terminal which is marked
with the letter L or Red colour.
For continued protection against risk of fire, replace only with a fuse with the same
type and rating. (ASTA approved 5A 250VAC fuse).
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE
REMOVING COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
SAFETY PRECAUTION
THIS DEVICE MUSTBE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO
NOTALLOW THIS UNITTO BE EXPOSED TO RAIN OR MOISTURE.
English - 35 -
[GB]_MB35_COST_46882W-1810UK_PANEUIDTV_SILVER1_TECHNIKA_10065830.indd 35
16.10.2009 10:22:00
Download from Www.Somanuals.com. All Manuals Search And Download.
|