OPERATING INSTRUCTIONS
LCD22-921
COLOUR TELEVISION WITH REMOTE CONTROL
For assistance, please call our Tesco Electrical Helpline on 0845 4566767
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Accessories
• Remote controlled colour LCD TV.
INFO
• Fully integrated digital TV (DVB-T).
SLEEP
SCREEN
SOURCE
PRESETS
• HDMI connectors for digital video and audio. This
connection is also designed to accept high definition
signals.
• USB input.
RETURN
MENU
Batteries: 2 X AAA
• 200 programmes from VHF, UHF(analogue).
• 300 programmes for digital mode (Digital TV).
• OSD menu system.
• Scart socket for external devices (such as video,
video games, audio set, etc.).
LANG.
EPG
SUBTITLE
FAV
• Stereo sound system. (German + Nicam)
• Teletext, fastext, TOP text.
• Headphone connection.
/
• Automatic programming system.
• Forward or backward manual tuning.
• Sleep timer.
Instruction Book
Remote
Controller
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
Introduction
• AVL (Automatic Volume Limiting).
Thank you for choosing this product. This manual will
guide you for the proper operation of your TV.
Before operating the TV, please read this
manual thoroughly.
• When no valid signal is detected, after 5 minutes the
TV switches itself automatically to standby mode.
• PLL (Frequency Search).
• PC input.
Please do keep this manual in a safe place for
future references.
• Plug&Play for Windows 98, ME, 2000, XP, Vista.
• Audio line out.
Preparation
• Game Mode (optional).
• Active antenna power (optional).
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top
of the set.
Use this device in moderate climates.
1
0
c
m
English - 2 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 22
02.11.2009 15:00:05
Download from Www.Somanuals.com. All Manuals Search And Download.
candles, are placed on top of the TV. Batteries should
not be exposed to excessive heat such as sunshine,
fire or the like.
Safety Precautions
Please read the following recommended safety
precautions carefully for your safety.
Lightning
Power Source
In case of storm and lightning
or when going on holiday,
disconnect the power cord from
the wall outlet.
The TV set should be operated only from a 220-240
VAC, 50 Hz outlet. Ensure that you select the correct
voltage setting for your convenience.
Power Cord
Replacement Parts
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the
power cord with wet hands as this could cause a short
circuit or electric shock. Never make a knot in the cord
or tie it with other cords. The power cords should be
placed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fire or
give you an electric shock. When it is damaged and
needs to be replaced, it should be done by qualified
personnel.
When replacement parts are
required, make sure that the service technician has
used replacement parts, which are specified by the
manufacturer or have the same specifications as the
original one. Unauthorized substitutions may result in
fire, electrical shock or other hazards.
Servicing
Please refer all servicing to
qualified personnel. Do not
remove the cover yourself as this
may result in an electric shock.
Waste Disposal
Instructions for waste disposal:
Moisture and Water
Do not use this device in a
humid and damp place (avoid the
bathroom, the sink in the kitchen,
and near the washing machine).
Do not expose this device to
rain or water, as this may be
dangerous and do not place
objects filled with liquids, such as
flower vases, on top. Avoid from
dripping or splashing.
• Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
• Batteries, including those which are heavy metal-
free, should not be disposed of with household
waste. Please dispose of used battery in an
environment friendly manner. Find out about the
legal regulations which apply in your area.
• Cold cathode fluorescent lamp in LCD PANEL
contains a small amount of mercury; please follow
the local laws or regulations for disposal.
If any solid object or liquid falls
into the cabinet, unplug the TV and have it checked by
qualified personnel before operating it any further.
Information for Users in European
Union Countries
Cleaning
Before cleaning, unplug the
adaptor from the wall outlet.Do
not use liquid or aerosol cleaners
Use soft and dry cloth.
This symbol on the product or on
its packaging means that your
electrical and electronic device
should be disposed at the end
of its service life separately from
your household wastes. There
are separate collection systems
for recycling in EU.
Ventilation
The slots and openings on the TV
set are intended for ventilation
and to ensure reliable operation.
To prevent overheating, these openings must not be
blocked or covered in anyway.
For more information, please
contact the local authority or the
dealer where you purchased the
product.
Heat and Flames
The set should not be placed
near to open flames and sources
of intense heat such as an electric
heater. Ensure that no open
flame sources, such as lighted
English - 3 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 33
02.11.2009 15:00:06
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
Headphone Volume
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
Installation
To prevent injury, this device must be
securely attached to the wall in accordance with the
installation instructions when mounted to the wall (if
the option is available).
LCD Screen
The LCD panel is a very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning
Do not leave your TV in standby or operating mode
when you leave your house.
English - 4 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 44
02.11.2009 15:00:06
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the Remote Control
1. Standby
2. Image size
INFO
3. Sleep timer
4. Numeric buttons
5. Return / TXT Index
6. Cursor up / TXT up page
7. Cursor left
SLEEP
SCREEN
SOURCE
PRESETS
8. Programme up
9. Programme down
10. Mono-Stereo / Dual I-II
11. Swap
12. Electronic programme guide (in DTV
mode)
RETURN
MENU
13. Info / TXT reveal
14. Picture mode selection
15. Source selection (This button is used to
select the different functions of the TV -
please see page 11)
16. Red / Sound / Page up (in DTV mode)
17. Green / Picture / Page down (in DTV
mode)
18. Yellow / Feature / Current language (in
DTV mode) (*)
19. Menu
20. Blue / Install
21. OK / Select
29
SUBTITLE
LANG.
EPG
FAV
22. Cursor right / TXT Subpage
23. Cursor down / TXT Downpage
24. Volume up
/
25. Volume down
28
26. Mute
27. Teletext / Mix
28. Subtitle (in DTV mode) / TXT Subtitle
29. FAV (Favourite Selection)(in DTV mode)
(*) Only available for EU country options.
Note: Buttons that are not indicated with a
number on the remote control illustration
are not functional in TV mode.
English - 5 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 55
02.11.2009 15:00:06
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD TV and Operating Buttons
1. Power On/Off Switch
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
P
\
C
H
T
V
/
A
V
M
E
N
U
Note: Press “
” / “
”
buttons at the same time to view
main menu.
Viewing the Connections- Back Connectors
1. SCART socket inputs or outputs for external devices.
Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such
as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
2. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”,
“Pb”, “Pr” correspond with your device’s connectors.
3. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the
TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to
enable PC audio.
English - 6 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 66
02.11.2009 15:00:07
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to
enable component audio.
4. S/PDIF Out outputs digital audio signals of the currently watched source.
Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input.You should
also set SPDIF Out option in the Sound Menu as On.
5. RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to
the television with an appropriate antenna cable, as shown in the illustrationin the following pages.
6. Audio Line Outs output audio signals to an external device such as an optional sound system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.
Note: Line out feature cannot be used while in HDMI source. You can use SPDIF instead.
7. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
8. HDMI 1 : HDMI input
HDMI Input is for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a High
Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets
or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p
signals. No sound connection is needed for an HDMI to HDMI connection.
Viewing the Connections - Side Connectors
1. CI Slot is used for inserting a CI card. A CI card allows you to view all the
channels that you subscribe to. For more information, see “Conditional Access”
section.
2. Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
3. Video Input is used for connecting video signals of external devices.Connect the
video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
4. Audio Inputs are used for connecting audio signals of external devices. Connect
the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT
jacks on your device.
Note: If you connect a device to the TV via the VIDEO INPUT, you should also
connect your device with an audio cable to the AUDIO INPUTS of the TV to
enable audio.
English - 7 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 77
02.11.2009 15:00:07
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
English - 8 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 88
02.11.2009 15:00:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the LCD TV to a PC
For displaying your computer’s screen image on
your LCD TV, you can connect your computer to the
TV set.
Connecting to a DVD Player and
external sources
If you want to connect a DVD player to your LCD
TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer
to your DVD player’s instruction book for additional
information. Power off both the TV and the device
before making any connections.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC to
the LCD TV.
Note: Cables shown in the illustration are not
supplied.
• When the connection is made, switch to PC source.
See “Input selection” section.
• If your DVD player has an HDMI socket, you can
connect via HDMI. When you connect to DVD player
as illustrated below, switch to HDMI source. See,
“Input Selection” section.
•Settheresolutionthatsuitsyourviewingrequirements.
Resolution information can be found in the appendix
parts.
A
u
d
i
o
P
C
I
n
p
u
t
I
n
p
u
t
s
• Most DVD players are connected through
COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio,
use a component audio cable as illustrated below.
When the connection is made, switch to YPbPr
source. See, “Input selection” section.
P
C
a
u
d
i
o
c
a
b
l
e
P
C
R
G
B
c
a
b
l
e
(
n
o
t
s
u
p
p
l
i
e
d
)
(
n
o
t
s
u
p
p
l
i
e
d
)
t
o
A
U
D
I
O
I
N
P
U
T
S
t
o
P
C
i
n
p
u
t
o
n
t
h
e
T
V
• You may also connect through the SCART socket.
Use a SCART cable as shown below.
Note: These three methods of connection perform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
C
o
m
p
o
n
e
n
t
C
o
m
p
o
n
e
n
t
a
u
d
i
o
v
i
d
e
o
S
c
a
r
t
s
o
c
k
e
t
H
D
M
I
i
n
p
u
t
s
i
n
p
u
t
s
i
n
p
u
t
D
V
D
P
l
a
y
e
r
English - 9 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 99
02.11.2009 15:00:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Side AV Connectors
Connecting Other Equipment via
Scart
Most devices support SCART connection. You can
connect a; DVD recorder, a VCR or a decoder to your
LCD TV by using the SCART socket. Note that cables
shown in the illustration are not supplied.
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• For connecting a camcorder, connect to the VIDEO
IN socket and theAUDIO SOCKETS. Do not connect
the camcoder to VIDEO IN socket at the same time
since it can cause noise in the picture. For selecting
the related source, see the section “Input selection”
in the following parts.
Power off both the TV and the devices before making
any connections.
For more information, refer to your device’s own
instruction book.
• To listen the TV sound from headphones, connect
to the HEADPHONE jack of theTV.
S
c
a
r
t
s
o
c
k
e
t
H
e
a
d
p
h
o
n
e
C
a
m
c
o
r
d
e
r
D
e
c
o
d
e
r
D
V
D
R
e
c
o
r
d
e
r
V
i
d
e
o
R
e
c
o
r
d
e
r
Inserting Batteries in the Remote
Control Handset
• Remove the battery cover located on the back of
the handset by gently pulling backwards from the
indicated part.
Using Other Connectors
You can connect a range of optional equipment
to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are
not supplied.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions and
replace the battery cover.
• To connect external speakers, use an audio cable.
Do not reverse theAUDIO LEFT andAUDIO RIGHT
jacks. Turn on the LCD TV and external speaker set
after all connections are made. Refer to your speaker
set’s manual for further queries.
• For connecting a to a device that has SPDIF support,
use an appropriate SPDIF cable to enable sound
connection. You should also set SPDIF Out option
in the Sound menu as On.
E
x
t
e
r
n
a
l
S
p
e
a
k
e
r
s
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries.
Remote range is approximately 7m/23ft.
A
d
e
v
i
c
e
t
h
a
t
s
u
p
p
o
r
t
s
S
P
D
I
F
s
i
g
n
a
l
.
English - 10 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1100
02.11.2009 15:00:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the TV On/Off
To Switch the TV On
• Connect the power cord to the 220-240VAC, 50 Hz.
Then the standby LED lights up.
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• To switch on the TV from standby mode either:
• Press the “ ” button, P+ / P- or a numeric button
• Press “
” button to decrease volume or “
”
on the remote control.
buttontoincreasevolume, soavolumelevelscale(slider)
will be displayed on the screen.
• Press the STANDBY button, -P/CH or P/CH+ button
on the TV. The TV will then switch on.
Programme Selection
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
• Press “P/CH +” button to select the next programme or
“P/CH -” button to select the previous programme.
Viewing Main Menu
• Press “
”/“
” buttons at the same time
By either method the TV will switch on.
to view main menu. In the Main menu select sub-
To Switch the TV Off
menu using “P/CH -” or “P/CH +” buttons and enter
the sub-menu using “
To learn the usage of the menus, refer to the menu
system sections.
” or “
” buttons.
• Press the “ ” button on the remote control or press
the STANDBY switch on the TV, so the TV will switch
to standby mode.
AV Mode
• To power down the TV completely, unplug the
power cord from the mains socket.
• Press the “TV/AV” button in the control panel on the
TV to switch between AV modes.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources.
• Functions of the menu system are described in the
following sections.
• Press SOURCE button on your remote control for
directly changing sources.
Volume Setting
or,
• Press V+ button to increase the volume. Press V-
button to decrease the volume.Avolume level scale
(slider) will be displayed on the screen.
• Select “Source” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“
” button to highlight an input and press “ ” button
Programme Selection (Previous or Next
Programme)
to select.
Note: You can mark desired source options by
pressing the OK button. Therefore, when SOURCE
button is pressed, only the marked source options will
be available (except for the TV source).
• Press “P -” button to select the previous
programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between 10 och 299 (for Digital TV) eller 10-199 (för
analog), press the numeric buttons consecutively.
The limit of the delay time is 3 seconds.
• Press directly the programme number to reselect
single digit programmes.
English - 11 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1111
02.11.2009 15:00:09
Download from Www.Somanuals.com. All Manuals Search And Download.
The Digital TV will automatically tune to the UHF or
VHF(*) (* for EU countries) transmission channels,
searching for digital terrestrial TV broadcasts and
displaying the names of channels found. This process
will take about a few minutes.
Initial Settings
When the TV set is operated for the first time, the
Digital TV turns on first.
Because this is the first time the TV is used, there are
no channels stored in the memory.
When the TV is turned on for the first time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!”
is displayed in all language options sequentially in
the OSD.
By pressing the “ ” or “ ” buttons highlight the
language you want to set and press OK button. After
then, “First time installation” OSD will appear on the
screen. By pressing “ ” or “ ” buttons, select the
country you want to set and press OK button (* for
EU countries).
After Automatic Search is completed, the following
message asking for analogue channel search appears
on the screen:
Note: Country selection OSD will not be available
for UK.
After then, the active antenna selection OSD appears
on the screen:
By pressing “ ” or “ ” buttons, set active antenna
mode as on or off.
To search for analogue channels, select “Yes”. TV
switches to the analogue TV mode. Analogue search
menu will be displayed.
Note: Country selection OSD will not be available
for UK.
After then, the active antenna selection OSD appears
on the screen:
By pressing “ ” or “ ” buttons, set active antenna
mode as on or off.
If an active antenna is connected to your TV, you
can select this option as On. Antenna power should
be “Off” when standard antenna is used instead of
the active antenna. See Configuration Menu in the
following sections for more information.
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
OK or RED button to continue. To cancel, press the
BLUE button.
Press OK button on the remote control to continue
and the following message will be displayed on the
screen:
For more information on this process, see “Install
Menu” section.
Note: For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK broadcasts only).
Do not turn off the TV while initializing first time
installation.
• To select the “Yes” or “No” option, highlight the
item by using “ ” or “ ” buttons and press the OK
button.
English - 12 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1122
02.11.2009 15:00:09
Download from Www.Somanuals.com. All Manuals Search And Download.
General Operation
Press the SOURCE button on the remote control
and select DTV/USB to switch the TV set to digital
terrestrial television broadcasting.
Information Banner
• Whenever you change channel, using the P- / P+
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen (available only in DTV
mode). This will remain on the screen for a few
seconds.
RED button (Shrink): makes the info boxes
smaller.
• The information banner can also be displayed at any
time while watching TV by pressing the INFO button
on the remote control:
GREEN button (Expand): makes the info boxes
larger.
YELLOW button (Prev. Day): displays the
programmes of previous day.
BLUE button (Next day): displays the programmes
of the next day.
INFO (Details): displays the programmes in detail.
Numeric buttons (Jump): go to preferred channel
directly via numeric buttons.
OK : views options for future programmes.
SWAP : jumps to the current boradcast.
• Press “0” button on the remote control to view Guide
Search menu. Using this feature, you can search the
programme guide database.
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
Displaying Subtitles
Press the “MENU” button to display the main menu,
highlight the Setup and then Language menu using
If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
“
” or “ ” button and press the OK button to display
the “Language settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use ” or “ button to set Subtitle to the
desired language.
If “Subtitle” is on and a language option is set, pressing
the
button causes the following warning message
Electronic Programme Guide
(EPG)
display on the screen (** for UK only):
• Some, but not all, channels send information about
the current and next events.
• Please note that event information is updated
automatically. If there is no event information data
available in channels, EPG will be displayed with
blanks.
• Press EPG button to view the EPG menu.
Digital Teletext (** for UK only)
• Electronic Programme Guide appears on the screen.
It is able to get Information of the channel - programs
weekly by means of 7-DAY-EPG. All programs of
channels are displayed. On the bottom of the screen;
info bar, showing all the available commands, will
be displayed.
• Press the
button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
English - 13 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1133
02.11.2009 15:00:10
Download from Www.Somanuals.com. All Manuals Search And Download.
The operation method may differ depending on the
contents of the digital teletext.
Channel List
Using the “ ” or “ ” button on the remote control,
make sure that the first item, Channel List, is
highlighted and press the OK button to display the
Channel List.
Follow the instructions displayed on digital teletext
screen.
• When Press “SELECT” button or similar message
appears on the screen, press the OK button.
The following operations can be performed in this
menu:
• When the
button is pressed, the TV returns to
• Navigating the entire list of channels
• Deleting channels
television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in
addition to digital teletext broadcasting together with
the normal broadcasting, there are also channels
with just digital teletext broadcasting.
• Renaming channels
• Adding locks to channels
• Setting favourites
• The aspect ratio (picture shape) when watching a
channel with just digital teletext broadcasting is the same
as the aspect ratio of the picture viewed previously.
• Moving channels
Channel List is the place where the channels are
managed.
• When you press the
button again, the digital
teletext screen will be displayed.
Analogue Teletext
Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.
Widescreen
Depending on the type of the broadcast being
transmitted, programmes can be viewed in a number
of formats. Press the SCREEN button repeatedly to
change zoom mode.
Navigating the Entire Channel List
Press “ ” or “ ” button for selecting the previous or
next channel. You can press RED or GREEN button
to move page up or page down.
When Auto is selected, the format being displayed is
determined by the picture being broadcast.
PLEASE NOTE: Menu size changes depending on
To watch a specific channel, highlight it using “
”
the chosen image size.
or “ ” button and then press “OK” button, while the
“Select” item on Channel List menu is highlighted by
Dijital TV Menu System
The Digital TV menu can only be viewed when using “ ” or “ ” button.
watching digital terrestrial broadcasting. Use the
SOURCE button to select DTV mode.
Then the name and number of the selected channel
will be displayed in the top-left and top-right of
Press the “MENU” button. The menu below appears the channel display at the top-right of the screen,
on the screen:
respectively.
Moving the channels in the channel list
• Press “ ” or “ ” buttons to select the channel that
will be moved.
• Press “ ” or “ ” buttons to select the “Move” item
on Channel List menu.
Following OSD will be displayed next to “OK” item
to indicate that enter a number by using the numeric
buttons on the remote control and press “OK” to
confirm.
English - 14 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1144
02.11.2009 15:00:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If you enter the same programme number Now pressing “ ” or “ ” button moves to the previous/
of the channel that you want to move, “.... channel next character. Pressing “ ” or “ ” button toggles
services will be replaced. Do you want to continue?” the current character, i.e., ‘b’ character becomes ‘a’
OSD will be displayed. Press OK to confirm or select by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
“No” to cancel.
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel that
will be deleted.
Press the “MENU” button to cancel the editing or OK
button to save the new name.
• Press “ ” or “ ” button to select the “Delete’’ item
on Channel List menu.
Adding Locks to Channels
Channel locking provides a password-protected
access to channels selected by parents. In order to
lock a channel you should know the parental lock
password (default value is set to 0000 in the factory
and can only be changed from the Configuration
menu).
Select the channel to be locked by highlighting it and
select the Lock option by pressing “ ” or “ ” button.
When the OK button is pressed, a dialog OSD asking
for the password will be displayed.
• Press the OK button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen:
Enter the password by using the numeric buttons on
the remote control. The lock icon “ ” will now be
displayed next to the selected channel. Repeat the
same operation to cancel the lock.
• Press “ ” or “ ” button to highlight the desired
option.
Setting Favourites
To set a favourite you should highlight the “Favourites”
item at the bottom of the Channel List menu. Then
press OK button and Edit Favourite List menu appears
on the screen.
Renaming Channels
To rename a specific channel, the channel must
be highlighted by pressing “ ” or “ ” button. Then
highlight the Edit Name item by pressing “ ” or “
” button as illustrated below. Press the OK button to
activate the rename feature.
You can list your favourite channels using Favourite
List.
Channel list OSD will look like this:
English - 15 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1155
02.11.2009 15:00:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel: “ ” or “ ” keys will navigate the user
through the TV or Radio list.
Date: Starting date is entered via the Left/Right or the
numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Change/Delete: permits or prohibits any modifications
for other users.
How to Add a Channel to a Favourites List
Duration: Duration between Start and End time.
• By pressing “ ” or “ ” buttons, highlight the channel
that you want to add to the favourite list.
Repeat: You can set a timer to be repeated as Once,
Daily or Weekly.
• By pressing OK button, the highlighted channel is
added to the Favourite List.
You can save the adjustments by pressing the GREEN
key or cancel the process by pressing the RED button.
You can edit the list via GREEN key and delete with
the RED button.
• F icon indicates that a channel is added to Favourite
List.
Removing a Channel from Favourite List
Conditional Access
• Highlight the channel that you want to remove from
the favourite list and press OK button to remove.You
can press OK button again to re-add a channel.
• Press the MENU button to display the main menu and
use the “ ” or “ ” button to highlight the “Conditional
Access” line and press the OK button:
• To activate Favourites, go to the Configuration menu
and select Favourite mode. Use “ ” / “ ” to set
Favourite mode as on. To cancel Favourites, set
Favourite Mode to Off.
On Screen Help
For all menus, press the INFO button to display
the help information about the menu functions. For
Channel List menu the following message is displayed
on the screen:
Program Guide
This section is same with the instructions given in
the General Operations page. Please see Electronic
Programme Guide (EPG) section in the General
Operations part.
Some Digital Terrestrial channels operate on a Pay
Per View basis. These require a subscription and a
hardware decoder.
Timers
Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the
following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM and then the viewing card to the slot
that is located in the terminal cover at the left-hand
side of the TV (from front view).
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
To display timers window, activate the item from the
main menu. To add a timer, press the YELLOW button
on the remote control. Then “Add Timer” window
appears.
• Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.
English - 16 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1166
02.11.2009 15:00:11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Some CAMs may require the following set up.
Please set the CAM by entering the Digital TV
menu, Conditional Access then pressing the OK
button. (CAM set up menu is not displayed when it
is not required.)
• To see the viewing contract information: enter
Digital TV; press the “MENU” button, then highlight
Conditional Access and press the OK button.
• When no module is inserted, “No Conditional
Access module detected” message appears on
the screen.
AC3 Audio (* for EU countries only)
• Refer to the module instruction manual for details
of the settings.
In the Configuration Menu, highlight the AC3 Audio
item by pressing “ ” or “ ” buttons. Use the “ ” or
NOTE: Insert or remove the CI module only when the
TV is switched off or in standby mode.
“
” buttons to set the AC3 Audio as On or Off.
If the channel that you are watching supports AC3
Audio, turn this setting on.
TV Setup
You can use this item to display the TV functions.
Hard of Hearing (* for EU countries only)
The digital TV Setup menu screen is accessed from
the main menu. Press the “MENU” button to display
the main menu and use “ ” or “ ” button to highlight
“TV Setup”, press the OK button to display TV Setup
menu screen.
Use “ ” or “ ” button to select Hard of Hearing and
then press “ ” or “ ” button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press “ ” / “ ” button to set this function as
on or off.
Channel List
Use “ ” or “ ” buttons to go to Channel List option.
Use “ ” or “ ” buttons to toggle Channel List Mode.
If you select “TV Only”, with the “ ” or “ ” buttons,
you navigate through only TV channels. If you select
“Radio Only”, with the “ ” or “ ” buttons, you navigate
through only radio channels. If you select “Text Only”,
with the “ ” or “ ” buttons, you navigate through only
text channels.
You can find detailed information for all menu items
in “Analogue TV Menu System” section.
Setup
Active Antenna
The adjustments in this menu are given as the
following:
Use “ ” or “ ” buttons to highlight Active Antenna
option.
When antenna power option is set as On by pressing
“
” or “ ” button, +5V will be transmitted to the
antenna output.
This feature enables the use of active antenna.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Configuration
You can configure the settings of your TV. Select
Configuration from Setup menu and press OK to
view this menu. Press the EXIT button on the remote
control to exit.
Scan Encrypted (**)
(**) for UK broadcasts only.
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
setting is on, search process will locate the encrypted
channels as well. If it is set as OFF manually, encrypted
English - 17 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1177
02.11.2009 15:00:11
Download from Www.Somanuals.com. All Manuals Search And Download.
channels will not be located while in automatic search to “0000” initially. Enter PIN. If it is incorrect, “Wrong
or manual search.
Pin” OSD will be displayed. If it is correct, the Parental
Control menu will be displayed:
Use “ ” or “ ” button to select Scan Encrypted and
then press “ ” or “ ” button to set this setting as
On or Off.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most update
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically powers
up at 3.00 A.M. each day and searches for any new
information which may be broadcast and will download
this to your receiver automatically. This operation will
normally take approximately 30 minutes. If you have
an important recording to be carried out at 3.00 A.M.
and you do not want to interrupt it, disable auto OAD
search by performing the following:
Maturity Lock (*)
(*) If you set Country option as UK in the first time
installation, Maturity Lock option will not be visible.
This setting is available only for EU countries.
When set, this option gets the maturity information
from the broadcast and if this maturity level is disabled,
does not show video-audio.
Menu Lock
In menu lock you can set locking for all menus, or the
Installation Menu to restrict access to these menus.
If the menu lock is disabled, there will be free access
to the menu system. Use “ ” or “ ” buttons to go to
Menu Lock option. Use “ ” or “ ” buttons to choose
Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only with
the correct lock key. So the user cannot add, delete,
rename, channels, cannot set timers.
• Press “MENU” button and using the “ ” or “
buttons to choose Setup and press the OK button.
”
• Highlight Configuration menu with “ ” or “ ” keys
and press OK.
INSTALLATION MENU: Installation menu is locked.
So the user can’t add channels. Changes will be
updated after exiting ‘Configuration Menu’.
• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.
Set PIN
Use “ ” or “ ” buttons to go to “Set PIN” option. Press
OK to display the “Set PIN” window. Use numeric
buttons to enter new pin number you will need to
input your new pin a second time for verification
purposes. The factory default pin number is 0000,
if you change the pin number make sure you write it
down and keep it safe.
• Using the“ ” or “ ” button change “Automatic
scanning” from Enabled to Disabled.
• Highlight “Scan for upgrade” menu with “ ” or “
keys and pres OK to commence upgrade.
”
•After the search progress is completed, the message
“ Completed searching for upgrade. No new software
was found” appears on the screen if no new software
is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording by
repeating the above instructions but this time
selecting ENABLE.
Time Settings
In the configuration menu, highlight the Time Settings
item by pressing “ ” or “ ” buttons.
Note: Your TV may start in First Time Installation mode
after OAD update.
Press OK and Time Settings sub menu will be
displayed on the screen. Current Time,Time Zone
Setting and Time Zone will be available.
Parental Control
Use “ ” or “ ” buttons to go to Parental Lock option.
Press OK button to enter the menu. A dialog box
asking for the lock key will be displayed. The key is set
Use “ ” or “ ” buttons to highlight the Time Zone
Setting. Time Zone Setting is set using “ ” or “
”buttons. It can be set to AUTO or MANUAL.
English - 18 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1188
02.11.2009 15:00:12
Download from Www.Somanuals.com. All Manuals Search And Download.
WhenAUTO is selected, Current Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone Setting, Time
Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time on the
top of the menu list will then change according to the
selected Time Zone.
Audio Description (Optional)
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media. You can use this feature, only if the broadcaster
supports that additional narration track. Use “ ” or
“
” buttons to select an item. Then use “ ” or “
”
Menu: shows the language of the system
buttons to set.
Preferred
These settings will be used if available. Otherwise the
current settings will be used.
• Audio: by pressing “ ” or “ ” keys change the
audio language.
• Subtitle: alter the subtitle language with “ ” or “
” keys. The chosen language will be seen in
subtitles.
Audio Description (Optional)
This function enables or disables the audio description
feature by pressing the “ ” or “ ” buttons.
• Guide: By pressing “ ” or “ ” buttons change the
guide language.
Preferred Language (Optional)
By pressing the “ ” or “ ” buttons the preferred audio
description language is being changed.
Current
• Audio: if audio language is supported change the
audio language by pressing “ ” or “ ” buttons
This setting can be used, only if it is available.
Relative Volume (Optional)
• Subtitle: if subtitle is backed up, alter the subtitle
language with “ ” or “ ” buttons. The chosen
language will be seen in subtitles.
Using this option, the Audio Description volume level
can be increased or decrased relatively, according to
the general volume.
Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:
Standby Search (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Language Settings
Use “ ” or “ ” button to select Standby Search and
then press “ ” or “ ” button to set this setting as On or
Off. If you change Standby Search to Off, this function
will be unavailable.
To use Standby search please make sure that
you select Standby Search as On.
Language
In this menu the user can adjust the preferred
language. Language is changed by pressing OK
button.
In the configuration menu, highlight the Language
Settings item by pressing “ ” or “ ” buttons. Press
OK and Language Settings submenu will be displayed
on the screen:
English - 19 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 1199
02.11.2009 15:00:13
Download from Www.Somanuals.com. All Manuals Search And Download.
Use “ ” or “ ” buttons to highlight the menu item
that will be adjusted and then press “ ” or “ ” button
to set.
Notes:
• System Language determines the on-screen menu
language.
•Audio Language is used for selecting the soundtrack
of a channels.
• Primary settings are the first priority when multiple
choices are available on a broadcast. Secondary
settings are the alternatives when the first options
are not available.
Installation
Select your Country, Language and Text language
by using “ ” or “ ” and “ ” or “ ” buttons. Press
OK or RED button to continue. To cancel, press BLUE
button. The following menu will be displayed during
the automatic tuning:
The Installation menu is mainly intended to help you
for creating a Channel Table in the most efficient way.
Select Installation from the Configuration menu by
pressing “ ” or “ ” buttons.
AfterAPS is finalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
Manual Channel Scan
Automatic Channel Scan
In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched
for the channels. For each valid channel number,
signal level and signal quality are shown on the
screen.
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted.
The following message appears on the screen:
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to confirm.
Use this setting to clear channels stored. Press “ ” or
“
” button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press OK to cancel. Select Yes by pressing “ ” or “
button and press OK to delete all of the channels.
”
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
Press the OK button to search for analogue channels.
The following menu appears on the screen for
analogue channel search:
To install factory settings, highlight “First Time
Installation” menu item and press OK button, then
English - 20 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2200
02.11.2009 15:00:13
Download from Www.Somanuals.com. All Manuals Search And Download.
you will be asked whether or not to delete the settings.
Selecting “Yes” by pressing OK button while the “Yes”
is highlighted will delete the existing channel table.
Analogue TV Menu System
Picture Menu
Then you will be asked to confirm for deleting all
channels and settings:
By selecting Yes and pressing the OK button, the
existing channel table will be deleted.
After factory settings are loaded, “First Time
Installation” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at first. By using “ ” or “
”
buttons, select the desired language option, and press
OK button to activate.
After then, “First time installation” OSD will appear on Mode
the screen. By pressing “ ” or “ ” buttons, select the
Country you want to set and press OK button (* only
for EU countries).
For your viewing requirements, you can set the related
mode option.
Press “ ” or “ ” button to select Mode. Press “
” or “ ” button to choose from one of these options:
Cinema, Dynamic and Natural.
- Next, active antenna mode selection OSD will appear
on the screen.Use “ ” or “ ” to set and press OK
to continue.See the section, “Initial Settings” for
more information.
Brightness/Contrast/Colour/Sharpness/
Hue
After active antenna mode option is selected, a
message asking for automatic search appears on
the screen:
Press “ ” or “ ” button to select the desired option.
Press “ ” or “ ” button to set the level.
Note: Hue option can only be visible when the TV
receives an NTSC signal.
Colour Temp
Press “ ” or “ ” button to select Colour Temp. Press
“
” or “ ” to choose from one of these options: Cool,
Press the OK button to start installation. After search
is completed for digital channels, a message asking
whether to search for analogue channels appears
on the screen.
Normal and Warm.
Note:
• Setting Cool option gives white colours a slight
blue stress.
This process is same as described in Automatic
Search section.
• Setting Warm option gives white colours a slight
red stress.
• For normal colours, select Normal option.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
Press “ ” or “ ” button to select Noise Reduction.
Press “ ” or “ ” to choose from one of these options:
Low, Medium, High or Off.
Film Mode
Films are recorded at a different number of frames per
second to normal television programmes.
English - 21 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2211
02.11.2009 15:00:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Press “ ” or “ ” button to select Film Mode.
Press “ ” or “ ” button to set this feature On or Off.
Turn this feature on when you are watching.
films to see the fast motion scenes clearly.
Equalizer
Press “ ” or “ ” button to select Equalizer. Press “
” button to view equalizer menu.
Game Mode (optional)
Select Game Mode by pressing “ ” or “ ” button.
Use “ ” or “ ” button to set Game Mode as On or
Off. When Game Mode is set to On, specific game
mode settings, which are optimized for better video
quality, will be loaded.
Also; Picture Mode, Contrast, Brightness, Sharpness,
Colour and Colour Temp settings will be invisible and
disabled while Game Mode is on.
Note:
Picture mode selection button on the remote control
will have no function while Game Mode is on.
Press “ ” or “ ” button to change the preset. In
equalizer menu, the preset can be changed to Music,
Movie, Speech, Flat, Classic and User.
Picture Zoom
Select Picture Zoom by pressing “ ” or “
button.
”
Select the desired frequency by pressing “ ” or “
”
Use “ ” or “ ” buttons, to change picture zoom to
Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Subtitle
or Zoom.
button and increase or decrease the frequency gain
by pressing “ ” or “ ” button.
Press the “M” button to return to the previous menu.
Store
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User.
Press “ ” or “ ” button to select Store. Press “
or OK button to store the settings. “Stored...” will be
displayed on the screen.
”
Balance
This setting is used for emphasizing left or right
speaker balance.
Reset
Press “ ” or “ ” button to select Reset. Press
Press “ ” or “ ” button to select Balance. Press “
” or “ ” button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
“
” or “ ” or OK button to reset the picture modes to
factory default settings.
Sound Menu
Headphone
Press “ ” or “ ” button to select Headphone. Press
“
” button to view the headphone menu.
Note: Headphone will be disabled when SPDIF option
is set to on.
Headphone sub-menu options are described below:
Volume
Press “ ” or “ ” button to select Volume. Press
“
“
” button to increase headphone volume level. Press
” button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63.
Sound Mode (optional)
Volume
Press “ ” or “ ” button to select Sound Mode. Using
Press “ ” or “ ” button to select Volume. Press “
or “ ” button to change the level of the Volume.
”
“
” or “ ” button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
English - 22 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2222
02.11.2009 15:00:14
Download from Www.Somanuals.com. All Manuals Search And Download.
Hence, if one of those buttons is pressed, Child Lock
On will be displayed on the screen when the menu
screen is not visible.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain fixed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Language
Press “ ” or “ ” button to select Language. Use
Press “ ” or “ ” button to select AVL. Press “ ” or
“
” or “ ” button to select the Language.
“
” button to set the AVL as On or Off.
Default Zoom
Spdif Out
While zoom mode is set as AUTO, the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press “ ” or “ ” button to select Default Zoom. You
can set Default Zoom to Panoramic, 16:9, 4:3 or
14:9 by pressing “ ” or “ ” button.
Press “ ” or “ ” button to select Spdif Out. Press “
” or “ ” button to set the Spdif Out. as On or Off.
Note: If Spdif Out is set to On, headphone will be
disabled.
Effect
If you are watching a mono broadcast, set Effect on to
obtain a better sound effect which will be more stereo-
like. If the current sound system is stereo, switching
this effect on will give a more spatial effect.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On.
Press “ ” or “ ” button to select Effect. Press “
or “ ” button to set as On or Off .
”
By pressing “ ” or “ ” button, select Blue
Background. Press “ ” or “ ” button to set Blue
Background as On or Off.
Store
Press “ ” or “ ” button to select Store. Press “
or OK button to store the settings. “Stored...” will be
displayed on the screen.
”
Menu Background
Press “ ” or “ ” button to select Menu Background.
You can set menu background level by pressing
Feature Menu
“
” or “ ” button.
Backlight
This setting controls the backlight level. Select
Backlight by pressing “ ” or “ ” button.
Press“ ” or “ ” button to set Backlight to Auto,
Medium, Maximum or Minimum.
Menu Timeout
To set a specific display timeout for menu screens,
set a value for this option.
Press “ ” or “ ” button to select Menu Timeout. Use
“
” or “ ” button to change menu timeout to 15 sec,
30 sec or 60 sec.
Teletext Language
Press “ ” or “ ” button to select Teletext Language.
Use “ ” or “ ” button to change Teletext Language to
West, East, Turk/Gre, Cyrillic, Arabic or Persian.
Sleep Timer
Press “ ” or “ ” button to select Sleep Timer. Use
“
” or “ ” button to set the Sleep Timer.
Ext Out
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
Press “ ” or “ ” button to select Ext Out. Use “ ” or
“
” button to set the Ext Out as On or Off.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Note:
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Child Lock
Press “ ” or “ ” button to select Child Lock.
Use “ ” or “ ” button to set the Child Lock On or Off.
When On is selected, the TV can only be controlled
by the remote control handset. In this case the control
panel buttons will not work.
Ext Out should be On in order to use Timers function
in the DTV mode.
English - 23 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2233
02.11.2009 15:00:15
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI PC Full Mode (optional)
Fine Tune
If you want to view PC screen in HDMI mode by using Press “ ” or “ ” button to select Fine Tune. Press “
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
” or “ ” button to adjust the tuning.
Search
Press “ ” or “ ” button to select Search. Use “
”
Note: If you connect an HDMI device and switch the
TV to HDMI mode, this feature will be visible (except
for 1080i/1080P resolution).
or “ ” button to start programme searching. You can
also enter the desired frequency using the numeric
buttons while Search item is highlighted.
Full Mode (optional)
Store
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080P resolutions, Full Mode item will
be visible.You can set Full Mode as 1:1 or Normal
by using “ ” or “ ”.If you select 1:1, screen ratio will
be adjusted correctly. If you set Normal, screen ratio
Press “ ” or “ ” button to select Store. Press “
or OK button to store the settings. “Stored...” will be
displayed on the screen.
”
Install Menu in AV Modes
may expand.
The following screen appears in the install menu when
the TV is in AV modes. Note that limited options will
be available. Switch to TV mode for viewing complete
version of the Install menu.
Install Menu
Colour System
Program
Press “ ” or “ ” button to select Colour System. Use
“
” or “ ” button to change the colour system to PAL,
Press “ ” or “ ” button to select Program. Use “
”
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.
or “ ” button to select the program number. You can
also enter a number using the numeric buttons on the
remote control. There are 200 programme storage
between 0 and 199.
Store
Press “ ” or “ ” button to select Store Program.
Press “ ” or OK button to store the settings.
“Stored...” will be displayed on the screen.
Band
Band can be selected either C or S. Press “ ” or “
” button to set Band.
Program Table
Select Program Table by pressing “ ” or “ ” button.
Press “ ” to display Program Table:
Channel
Channel can be changed by “ ” or “ ” button or
numeric buttons.
Colour System
Press “ ” or “ ” button to select Colour System. Use
“
” or “ ” button to change the colour system to PAL,
PAL 60, SECAM or AUTO.
Sound System
Press “ ” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound system
to BG,DK, I, L or L’.
English - 24 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2244
02.11.2009 15:00:16
Download from Www.Somanuals.com. All Manuals Search And Download.
By moving the cursor in four directions you can reach Whenever you press the BLUE button, APS function
20 programmes in the same page. You can scroll the stops and Program Table appears on the screen.
pages up or down by pressing the navigation buttons
If you wait until the end of APS, Program Table will be
to see all the programmes in TV mode (except for the
displayed with the programmes found and located.
AV modes). By cursor action, programme selection is
Source Menu
done automatically.
Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu appears
on the screen:
Name
To change the name of a programme, select the
programme and press the RED button.
The first letter of the selected name will be highlighted.
Press “ ” or “ ” button to change that letter and “
”
or “ ” button to select the other letters. By pressing
the RED button, you can store the name.
Move
Select the programme which you want to move by
navigation buttons. Press the GREEN button. By
navigation buttons move the selected programme to
the decided programme space and press the GREEN
button again.
Delete
To delete a programme, press the YELLOW button.
Pressing the YELLOW button again erases the
selected programme from the programme list, and
the following programmes shift one line up.
In source menu, highlight a source by pressing “
or “ ” button and switch to that mode by pressing
” button. Source options are; TV, DTV, DVD/USB,
”
“
EXT-1, FAV, HDMI, YPbPr and PC-VGA.
Note: Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.
APS (Auto Programming System)
When you press the BLUE button for starting
automatic tuning, Auto Programming System menu
will appear on the screen:
PC Mode Menu System
See “Connecting the LCD TV to a PC” section for
connecting a PC to the TV set.
For switching to PC source, press “SOURCE” button
on your remote control and select PC input. You can
also use “Source” menu to switch to PC mode.
Note that PC mode menu settings are available only
while the TV is in PC source.
PC Position Menu
Select the first icon by pressing “ ” or
“
” button. PC Position menu appears on the
screen:
Country
Press “ ” or “ ” button to select your country. If you
want to exit from A.P.S. function, press the BLUE
button.
When you press OK or RED button for starting
automatic tuning, all stored programmes will be erased
and the TV will search for available channels. During
the search, the following OSD will be displayed:
English - 25 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2255
02.11.2009 15:00:16
Download from Www.Somanuals.com. All Manuals Search And Download.
Autoposition
Mute Function
Press “ ” button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture
into correct place automatically. This setting therefore
automatically optimizes the display.
To cancel mute, there are two alternatives; the first
one is pressing the “ ” button and the second one
is increasing the volume level.
Select Autoposition item by using “ ” or “ ” buttons.
Press OK or “ ”, “ ” button.
Picture Mode Selection
Warning: Please ensure auto adjustment is performed
with a full screen image to ensure best results.
By pressing PRESETS button, you can change
Picture Mode settings in accordance with your
viewing requirements.Available options are Dynamic,
Natural and Cinema.
H (Horizontal) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
Note: This feature cannot be set while in PC mode.
Select H Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
Freezing Picture
V (Vertical) Position
You can freeze the picture on the screen by pressing
the “OK” button on the remote control. Press the
“OK” button to freeze picture. Press again to quit
freeze mode.
This item shifts the image vertically towards the top
or bottom of the screen.
Select V Position item by using “ ” or “ ” button.
Use “ ” or “ ” button to adjust the value.
Zoom Modes
You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Press SCREEN button to directly change the zoom
mode.
Available zoom modes are listed below.
Select Phase item by using “ ” or “ ” buttons. Use
Note:
“
” or “ ” button to adjust the value.
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Zoom mode cannot be changed while in PC mode.
Auto
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
Select Dot Clock item by using “ ” or “ ” buttons.
Use “ ” or “ ” button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
• When the AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
Press “ ” or “ ” button to select the second icon. PC
Picture menu appears on the screen.
Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical to
settings defined in TV picture menu under “Analogue
TV Menu System”.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
Note: If you set Colour Temp as User, you can define
R, G, B settings manually.
Sound, Feature and Source settings are identical to
the settings explained in Analog TV menu system.
Displaying TV Information
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
Programme Number, Programme Name, Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
“INFO” button is pressed.
English - 26 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2266
02.11.2009 15:00:17
Download from Www.Somanuals.com. All Manuals Search And Download.
4:3
Teletext
Use to view a normal picture (4:3 aspect ratio) as this
is its original size.
Teletext system transmits information such as news,
sports and weather on your TV. Note that is the signal
degrades, for example in poor/adverse weather
conditions, some text errors may occur or the teletext
mode may be aborted.
Teletext function buttons are listed below:
“
” Teletext On-Off
Panoramic
Activates teletext mode when pressed once. Pressing
the button for the second time, activates teletext mix
feature. Pressing again will quit the teletext mode.
This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen, without
making the picture appear unnatural.
“RETURN” - Index
Selects the teletext index page.
“
” Subcode Pages
Selects subcode pages if available when the teletext
is activated.
The top and bottom of the picture are slightly cut off.
“INFO” - Reveal
14:9
Shows hidden information (e.g. solutions of games).
“SCREEN” - Expand
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
Press once to enlarge top half of the page, press again
to enlarge the bottom half of the page. Press again to
revert back to normal size.
P+ / P- and numbers (0-9)
Press to select a page.
Cinema
Note: Most TV stations use code 100 for their index
pages.
This zooms up the wide picture (16:9 aspect ratio) to
the full screen.
Coloured Buttons
(RED/GREEN/YELLOW/BLUE)
Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.
When FASTEXT system is available, sections in a
teletext page will become colour-coded and can be
selected by pressing the coloured buttons. Press
a coloured button that corresponds to with your
needs.
Subtitle
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
The coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing P - or P + commands will request
the next or previous page respectively.
Zoom
Teletext Subtitle
This option zooms to the picture.
If you press SUBTITLE button, teletext subtitle
information will be displayed on the bottom right part
of the screen (if available). You can set the desired
option by highlighting it using “ ” or “ ” button and
then by pressing OK button.
Note: You can shift to screen up or down by pressing
“
” / “ ” buttons while picture zoom is selected as
panaromic, 14:9, Cinema or Subtitle.
English - 27 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2277
02.11.2009 15:00:17
Download from Www.Somanuals.com. All Manuals Search And Download.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
Tips
Screen Care
Clean the screen with a slightly damp, soft cloth. Do
not use abrasive solvents as they may damage the
coating layer of the TV screen.
No Picture
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial
cable damaged? Are suitable plugs used to connect
the aerial? If you are in doubt, consult your dealer.
For your safety, unplug the mains plug when cleaning
the set. When moving the TV, hold it properly from
the bottom part.
No Picture means that your TV is not receiving a
transmission. Have you selected the correct button
on the remote control? Try once more.
Image Persistence
Please note that ghosting may occur while displaying
a persistent image. LCD TVs’ image persistence may
disappear after a short time. Try turning off the TV
for a while.
Also make sure the correct input source has been
selected.
Sound
To avoid this, do not leave the screen in still picture
for extended periods.
You can not hear any sound. Did you perhaps interrupt
the sound, pressing the
button?
No Power
Sound is coming from only one of the speakers. Is the
balance set to one extreme? See Sound Menu.
If your TV system has no power, please check the
main power cable and connection to the mains
socket outlet.
Remote Control
Your TV no longer responds to the remote control.
Perhaps the batteries are exhausted. If so you can still
use the local buttons at the bottom of the TV.
Poor Picture
Have you selected the correct TV system? Is your TV
set or house aerial located too close to a non-earthed
audio equipment or neon lights, etc.?
Input Sources
If you cannot select an input source, it is possible that
no device is connected.
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the
aerial.
Check theAV cables and connections if you have tried
to connect a device.
Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune
the channels.
Information for Users on Disposal of Old Equipment and
Batteries
[European Union only]
These symbols indicate that equipment with these symbols should not
be disposed of as general household waste. If you want to dispose
of the product or battery, please consider the collection systems or
facilities for appropriate recycling.
Battery
Notice: The sign Pb below the symbol for batteries indicates that this
battery contains lead.
Products
English - 28 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2288
02.11.2009 15:00:17
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: PC Input Typical
Display Modes
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)
The display has a maximum resolution of 1600 X
1200. The following table is an illustration of some of
the typical video display modes.
Supported
Source
Available
Signals
PAL 50/60
NTSC 60
RGB 50
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Your TV may not support different resolutions.
Supported resolution modes are listed below.
EXT-1
(SCART)
If you switch your PC to an unsupported mode, a
warning OSD will appear on the screen.
RGB 60
PAL 50/60
NTSC 60
FAV
Resolution
Frequency
Index
Standard
Ver
(Hz)
Hor
480I
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
60Hz
60Hz
50Hz
50Hz
50Hz
60Hz
50Hz
60Hz
50Hz
60Hz
Hor
Ver
(KHz)
31.5
37.9
37.5
35.2
37.9
43.8
48.1
46.9
49.7
48.4
56.5
57.7
60.0
64.2
67.5
68.9
47.7
47.7
60.0
64.0
80.0
75.0
480P
576I
1
2
640
640
480
480
480
600
600
600
600
600
624
768
768
768
768
864
864
870
768
768
960
60
72
75
56
60
70
72
75
75
60
70
72
75
70
75
75
60
60
60
60
75
60
VESA
VESA
VESA
VESA
VESA
576P
720P
720P
1080I
1080I
1080P
1080P
480I
3
640
YPbPr
4
800
5
800
6
800
7
800
VESA
VESA
MAC
8
800
9
832
10
11
12
13
14
15
16
17
18
19
20
21
22
1024
1024
1024
1024
1152
1152
1152
1280
1360
1280
VESA
VESA
480P
576I
576P
720P
720P
1080I
1080I
1080P
1080P
HDMI1
VESA
VESA
MAC
VESA
VESA
VESA
VESA
VESA
1080P 24 HZ
1280 1024
1280 1024
1600 1200
(X: Not Available, O: Available)
Note: In some cases a signal on the LCD TV may
not be displayed properly. The problem may be
an inconsistency with standards from the source
equipment (DVD, Set-top box, etc.). If you do
expereince such a problem please contact your dealer
and also the manufacturer of the source equipment.
English - 29 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 2299
02.11.2009 15:00:18
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV BROADCASTING
PAL/SECAM B/G D/K K’ I/I’ L/L’
RECEIVING CHANNELS
VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile
for UK
Frequency range: 474-850 MHz for UK models
170-862 MHz for EU models
Digital
Reception
Transmission standard: DVB-T. MPEG-2
Demodulation: COFDM with 2K/8K FFT mode
FEC: all DVB modes
Video: MP@ML, PAL, 4:3/16:9
Audio: MPEG Layer I&II 32/44.148kHz.
NUMBER OF PRESET CHANNELS
200
CHANNEL INDICATOR
On Screen Display
RF AERIAL INPUT
75 Ohm (unbalanced)
OPERATING VOLTAGE
220-240V AC, 50 Hz.
AUDIO
German+Nicam Stereo
AUDIO OUTPUT POWER (WRMS.) (10% THD)
2 x 4
POWER CONSUMPTION (W)
70 W (max)
< 1 W (Standby)
PANEL
22” Wide Display
DIMENSIONS (mm)
DxLxH (With foot): 117 x 532 x 376
Weight (Kg): 5,40
DxLxH (Without foot): 60 x 532x 347
Weight (Kg): 5,25
English - 30 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 3300
02.11.2009 15:00:18
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Instruction
For your own safety read following instruction carefully before attempting to connect this unit to the mains
supply.
MAINS (AC) OPERATION
The wires in the mains lead are coloured in accordance with the following code :
GREEN
&
FUSE
YELLOW
(Earth)
(if there is earth cable)
BROWN
(Live)
BLUE
(Neutral)
IMPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E, or by the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue or black must be connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured brown or red must be connected to the terminal which is marked with the
letter L or coloured Red.
For continued protection against risk of fire, replace only with same type and rating of fuse (ASTA
approved 5A 250VAC fuse).
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT
ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.
English - 31 -
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10006655884411..iinndddd 3311
02.11.2009 15:00:18
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Features ............................................................... 33
•General Properties .......................................... 33
About this Manual............................................. 33
Safety Information......................................... 33
Notes on Discs ..................................................... 34
Stopping Play.................................................... 43
Rapid Advance (Rapid Reverse) ...................... 43
ZOOM............................................................... 43
Repeat.............................................................. 43
Display Function............................................... 43
On handling discs............................................. 34 DVD MENU ITEMS .............................................. 44
On cleaning....................................................... 34
Licence Notification .............................................. 34
How to Watch a DVD............................................ 34
DVD Control Panel Buttons.................................. 34
Using Digital Multimedia Connectors.................... 35
MC Card Connection........................................ 35
USB Memory Connection................................. 35
Overview of the Remote Control .......................... 36
USB & MC Modes Playback................................. 37
General Control Buttons for Media Mode......... 37
Control Buttons for Playback............................ 37
VIDEO SETUP PAGE....................................... 44
TV Type......................................................... 44
LANGUAGE SETUP......................................... 44
OSD LANG ................................................... 44
AUDIO .......................................................... 44
DISC MENU.................................................. 44
SUBTITLE..................................................... 44
PREFERENCES............................................... 44
DEFAULT...................................................... 44
DOWNMIX.................................................... 44
PASSWORD (Change Password): ............... 45
Picture Playback............................................... 37 Troubleshooting.................................................... 45
DVD Playback ...................................................... 37
Basic Play......................................................... 37
For your reference: ....................................... 37
Stopping Play ................................................... 38
Stopping Play and Returning To The Menu
Screen .......................................................... 38
Rapid Advance (Rapid Reverse) ...................... 38
Skipping Ahead or Back to Chapters................ 38
Skipping ahead............................................. 38
Skipping back ............................................... 38
The picture quality is poor (DVD)...................... 45
Disc does not play ............................................ 45
Wrong OSD language....................................... 45
Some functions (Angle, Zoom etc) do not
work................................................................. 45
No picture ......................................................... 45
No sound .......................................................... 45
Distorted sound................................................. 45
No response from remote control..................... 45
If nothing works................................................. 46
Still Picture (PAUSE) ........................................ 38 Definition of Terms................................................ 46
Frame Advance (STEP FORWARD) ................ 38
Slow - motion Play Forward.............................. 38
Direct Selection of Scenes................................ 38
Selecting Scenes by Chapter Number.......... 38
Selecting Scenes by Title Number................ 39
Selecting Scenes by Time ............................ 39
Convenient Functions....................................... 39
Displaying / Changing Subtitle Language......... 40
Changing Audio Soundtrack Language............ 40
Viewing From Another Angle ............................ 40
Video CD Playback............................................... 41
Angle................................................................. 46
Chapter Number............................................... 46
DVD.................................................................. 46
Subtitles............................................................ 46
Time Number.................................................... 46
Title Number ..................................................... 46
Track Number................................................... 46
Dolby Digital...................................................... 46
Dolby Pro Logic ................................................ 46
LPCM................................................................ 46
MPEG............................................................... 46
Basic Play......................................................... 41 Supported File Formats for USB & MC Modes..... 47
Stopping play.................................................... 41 Supported Memory Card Types............................ 47
Rapid Advance / Rapid Reverse....................... 41 Disc Types Compatible with This Unit .................. 48
Skipping Ahead or Back to Chapters................ 41
Specifications ....................................................... 49
Skipping ahead............................................. 41
Skipping back ............................................... 41
Still Picture (PAUSE) ........................................ 41
Frame Advance (STEP Forward).................. 41
Slow- motion Play............................................. 41
Direct Selection of Scenes................................ 42
Selecting Scenes by Time ............................ 42
CD Menu .............................................................. 42
Basic Play......................................................... 42
MP3/MPEG File................................................ 42
PAUSE.............................................................. 43
English - 32 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3322
20.10.2009 16:45:07
Download from Www.Somanuals.com. All Manuals Search And Download.
*** DVD-R/RW discs recorded by DVD-Video
method can be played . Some DVD-R/RW
discs may be incompatible due to laser pick-
up and disc design.
Features
•General Properties
• DVD / CD / CD-R / CD-RW / MP3 / JPEG /
MPEG.
*** Some discs may be incompatible with JPEG
Viewer function due to different recording
format or condition of the discs.
• USB & MC inputs.
• NTSC/PAL playback (according to disc
content)
About this Manual
• User-friendly multilanguage OSD menu Safety Information
control.
CAUTION
DVD Player is a class 1 laser product. However
this product uses a visible laser beam which
could cause hazardous radiation exposure.
Be sure to operate the player correctly as
instructed.
•
, LPCM audio via coaxial and
optical digital audio outputs. (optional)
•MultipleAspectRatiosupport(16:9Widescreen,
4:3 Letterbox, 4:3 PAN & SCAN)
• Multi-Audio (up to 8) support (According to
disc content)
C
L
A
S
S
1
• Multi-Subtitle (up to 32) support (According to
disc content)
L
A
S
E
R
P
R
O
D
U
C
T
• Multi-Angle (up to 9) support (According to
disc content)
• Manufactured under license from Dolby
Laboratories. “Dolby”, and the double-D symbol
are trademarks of Dolby Laboratories.
• 8 level parental control
• Fast forward and rewind in 5 different speeds.
(2x, 4x, 8x, 16x, 32x)
• DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
• Slow motion playback in 4 different speeds.
(1/2x, 1/4x, 1/8x, 1/16x forward)
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
of persons.
• Frame by frame forward playback.
• Time Search
• Repeat
• A B repeat
• Program function for Audio CD, MP3 and
JPEG.
• Coaxial & Optical digital audio outputs
(optional)
The exclamation point within
an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
instructions in the literature
accompanying the appliance.
• Copied disks may be incompatible.
Note:
*** This DVD player may not support some
MP3 recordings due to differences in recording
formats or disc type.
*** Please read the owner’s manual about MP3
playback.
*** CD-R/CD-RW discs recorded by CD-DA
method can be played. Some CD-R/CD-RW
discs may be incompatible due to laser pick-up
and disc design.
English - 33 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3333
20.10.2009 16:45:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Discs
How to Watch a DVD
When placing a disc into the loader, labeled side
of the disc should be on the front:
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• If the disc is contaminated with any substance
like glue remove before using it.
When TV set is turned on, first switch to DVD
source by using the SOURCE button on the
remote control. Press play on the remote
control, or directly press play button at the front
panel. If there is no disc inside the loader, place
a DVD first and press play.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature can rise quickly and damage
the disc.
Note: You can get DVD source output via scart
socket.
• After playing, store the disc in its case.
DVD Control Panel Buttons
On cleaning
• Before playing, clean the disc with a cleaning
cloth. Wipe the disc from the center out.
A. Disc loader
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static
spray intended for vinyl LPs.
B. Memory card slot
C. USB input
D. Play / Pause
Licence Notification
Plays/pauses the disc. When DVD menu
(root menu) is active, this button functions
as “button select” (selects the highlighted
item in menu) if this is not prohibited by
the disc.
• This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
E. Stop / Eject
Stop playing disc / Eject or Load the disc
Note:
• You cannot eject the disc via the remote
control.
•While playing a file, you should press
STOP button three times to eject.
English - 34 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3344
20.10.2009 16:45:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Digital Multimedia Connectors
• Use SWAP button on the remote control to switch between USB and memory card.
• You can connect USB/MC devices to your TV by using USB or MC input of the TV. This feature
allows you to display/play files stored on a USB device or a MC card.
• It is possible that certain types of USB devices (MP3 Players) or Multimedia Card interfaces
may not be compatible with this TV.
• You may back up your files before making any connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not be responsible for any file damage or data
loss.
• Do not pull out USB module or MC card while playing a file.
CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Especially, do
not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and
especially the USB device itself.
U
S
B
M
E
M
O
R
Y
M
E
M
O
R
Y
S
I
D
E
C
A
R
D
V
I
E
W
MC Card Connection
• Insert the MC card into the Memory Card Input of the TV. Make sure the gold contact area faces
up. The card is designed to fit easily into the system one way only. Do not bend the card or force
it into the slot. Insert only one card at a time.
• When you want to eject the card, do not grab the card all at once. Push to the card gently. Then
it will pop out.
USB Memory Connection
• Plug your USB device to the USB input of the TV.
IMPORTANT: The TV supports only FAT32 disk formatting. NTFS format is not supported.
• It is recommended that you connect your USB device directly to the USB input of the TV. Some
compatibility problems may occur if you use a separate cable connection..
Note: While in DVD mode, MEDIA screen will be displayed automatically when you plug USB or insert a valid
memory card.
English - 35 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3355
20.10.2009 16:45:08
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the Remote Control
1. Standby
2. Image size
INFO
3. Sleep timer
4. Numeric buttons
5. Return
SLEEP
SCREEN
SOURCE
PRESETS
6. Cursor up
7. Cursor left
8. Programme up
9. Programme down
10. No function in DVD mode
11. Audio-Language selection
12. Swap / DVD media selection
13. No function in DVD mode
14. Display time / DVD menu
15. Clear
RETURN
MENU
16. Stop
17. No function
18. Rapid Reverse
19. Rapid advance
20. Info
21. No function
SUBTITLE
LANG.
EPG
FAV
22. Picture mode selection
23. Source selection
24. Zoom
/
6
37
38
39
40
41
42
25. Repeat
26. Root
27. Menu
28. Title
29. OK / Select
30. Cursor right
43
31. Cursor down
32. Volume up
33. Volume down
34. Subtitle
40. Play
35. Mute
41. Pause / Play
42. Skip next
36. No function in DVD mode.
37. No function
43. Skip previous
38. Angle
39. Search mode
English - 36 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3366
20.10.2009 16:45:08
Download from Www.Somanuals.com. All Manuals Search And Download.
/
>
Highlight an item
USB & MC Modes Playback
Switch to DVD source by using the SOURCE or
PLAY button on the remote control.
by moving up or down.
>
>
Play
Pause
You can connect both USB and MC sources to
your TV at the same time. Press SWAP button
on the remote control to list, available inputs are
listed on a menu screen.
>
Stop
RETURN
selection.
>
Media source
Control Buttons for Playback
D
V
D
U
S
B
/
>
Rapid reverse /
rapid advance/ .
Search for a
M
E
D
I
A
C
A
R
D
SEARCH
>
Select the desired input by using the cursor
button and then press OK button to view
contents. After OK button is pressed, the
following screen (depending on the make and
contents of the device) will appear after a short
while:
specific time.
Displays time.
Zooms picture.
DISPLAY
ZOOM
>
>
Picture Playback
/
> Previous - next picture.
> Rotate picture
/
D
i
r
:
0
0
1
REPEAT
ZOOM
ROOT
> Displays repeat options.
> Zooms picture.
\
D
C
I
M
T
N
R
A
C
K
9
> Go back to root folder.
D
I
V
X
E
W
F
I
L
E
DVD Playback
Basic Play
C
A
R
D
1. Press on the power button
2. Please insert a disc to the loader.
You can view or play contents of your device by
using the related remote control buttons. See,
General Control Buttons for Media Mode and
Control Buttons for Video Playback.
The disc will be automatically loaded and play
commences if the disc does not have any menus
recorded on it.
Note:
A menu may appear on the TV screen after a
few moments or the film may start immediately
after the introduction of the Film Company. This
behaviour depends on the disc content and
may change.
• Whenever you press the SWAP key, available
media sources will be listed.
• If there is an active playback, you have to press
STOP button first and then SWAP key to list
available DMP inputs.
NOTE: Step 3 and 4 is available only when a menu
is recorded on the disc.
• If you have plugged only one source, then only
that source will be available to be selected.
3. Press “ ” / “ ” /
/
or the number button
(s) to select the preferred title.
• Do not pull out the MC module while playing
a file.
4. Press SELECT.
• It is possible that certain types of MC or USB
devices may not be compatible with this TV.
Play of the selected items now starts.The played
item may be a motion picture, a still picture or
another submenu depending on the disc.
General Control Buttons for Media
Mode
For your reference:
If an action corresponding to a button is prohibited the
OK / SELECT
>
Enter/View
“
” symbol appears.
English - 37 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3377
20.10.2009 16:45:09
Download from Www.Somanuals.com. All Manuals Search And Download.
The screen freezes.
Stopping Play
Press SKIP/ FRAME (
control.
) on the remote
Press stop ( ) twice (only for videos).
To stop the play permanently, press STOP (
)
The next frame of the movie is displayed.
twice. When the STOP( ) button is pressed for
the first time, a message “PRESS PLAY KEY
TO CONTINUE” will appear on the screen to
remind you if you want to continue the play. To
stop the play, press the STOP ( ) button again
or you can press SELECT to continue.
You can press SKIP/ FRAME (
following frames.
) for the
To return to normal play press PLAY ( ).
NOTE: Reverse stepping is not available.
Slow - motion Play Forward
Press PAUSE ( ) once during play.
The screen freezes.
Stopping Play and Returning To The Menu
Screen
(When a menu is available on the disc)
Press MENU or TITLE button depending on
the disc. Play is suspended, and the Disc menu
screen is displayed.
Press SEARCH/SLOW (
control.
) on the remote
The unit starts playing the movie at four different
Rapid Advance (Rapid Reverse)
speeds (
1/16).
1/2,
1/4,
1/8 and
Press SEARCH/SLOW (
control during play.
) on the remote
You can increase or decrease the speed of the
slow-motion play by pressing SEARCH/SLOW
NormalplayisresumedwhentheSELECTbutton
or PLAY/PAUSE ( ) button is pressed.
The speed of advance (
16x, 32x) or reverse (
8x,
press of the
(
or
).
The speed of slow motion play is displayed on
the screen each time you change it.
2x,
4x,
2x,
8x,
To return to normal play, press PLAY ( ).
4x,
16x,
or
32x) changes for every
button.
NOTE: No sound will be heard during Slow motion
play.
Note: No sound will be heard during Rapid advance
or Rapid reverse.
NOTE: Reverse slow motion play is not available.
Direct Selection of Scenes
Skipping Ahead or Back to Chapters
Skipping ahead
Selecting Scenes by Chapter Number
Press SEARCH MODE on the remote control
once during playback.
Press SKIP/ FRAME (
control during play.
) on the remote
The chapter/title search box is displayed on the
screen. You can see the currently playing and
total number of chapters in right hand side of
the display bar as -- / xx.
A chapter is skipped forward each time the
button is pressed.
Skipping back
Press SKIP/ FRAME (
control during play.
) on the remote
Enter the number of the chapter using number
buttons.
When the button is pressed once midway
through a chapter, play returns to the previous
chapter.
The selected chapter is played just after you
enter the chapter number.
For your convenience:
Still Picture (PAUSE)
• If the chapter number you entered is between
0 and 9, player will automatically jump to the
related chapter.
Press PAUSE ( ) once during play.
The screen freezes.
To return to normal play press PLAY ( ).
Frame Advance (STEP FORWARD)
Press PAUSE ( ) once during play.
•You can clear the field by pressing the C button
if you enter a wrong number.
• If you attempt to enter a number greater than
the total number of chapters on the current
English - 38 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3388
20.10.2009 16:45:09
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you wait five seconds without pressing any
key to enter time, selecting scenes by time
option is cancelled.
title, the search box disappears and “
Invalid” message is displayed on screen.
Input
• If you wait five seconds without pressing any
key for selecting scenes by chapter number,
the operation is cancelled.
• You can press RETURN key to cancel time
search.
Convenient Functions
Displaying the time information
Press DISPLAY during play.
• You can press RETURN key to cancel title
search.
Selecting Scenes by Title Number
Some information is displayed on TV screen
to indicate the current status of the disc. On
the display screen you can find the following
information lines:
Press SEARCH on the remote control once
during playback.
The chapter/title search box is displayed on
the screen. You can see the currently playing
and total number of titles in left hand side of the
display bar as -- / xx.
Line 1: Time Counter Mode
Line 2: Title Number, Chapter Number, Time
Counter
Enter the number of the title using the numeric
buttons.
Line 3: Audio Number, Audio Format, Number
of Output Channels, Audio Language
The selected title is played just after you enter
the title number.
Line 4: Subtitle Number & Subtitle Language
Time counter modes can be selected by
pressing INFO key consecutively.
Selecting Scenes by Time
You can view the DVD starting from any time
point you want.
The sequence for time counter modes is as
ollows: TITLE ELAPSED, TITLE REMAIN,
CHAPTER ELAPSED and CHAPTER
REMAIN.
Press SEARCH MODE on the remote control
“twice” during playback.
The time search box is displayed on the screen
as Title xx/xx Time -- : -- : --.
• If “TITLE ELAPSED” is displayed, the elapsed
time for the title is being displayed.
Enter the time using number buttons.
• If “TITLE REMAIN” is displayed the remaining
time for the title is being displayed.
The title is played beginning from the desired
time just after you enter the time. If not prohibited
by the DVD.
• If “CHAPTER ELAPSED” is displayed,
the elapsed time for the chapter is being
displayed.
Press SEARCH MODE on the remote control
“three times” during playback.
•
If “CHAPTER REMAIN” is displayed, the
remaining time for the chapter is being
displayed.
The time search box is displayed on the screen
as Chapter xx/xx Time -- : -- : --.
Enter the time using number buttons.
Pressing the DISPLAY key for the second time
closes display menu screen. “DISPLAY OFF”
is displayed.
The Chapter is played beginning from the
desired time just after you enter the time. If not
prohibited by the DVD.
Displaying a scene with a larger and closer
view
For your convenience:
• You can clear the fields by pressing the C
button if you enter wrong numbers.
The ‘zoom in’ function enables you to take a
closer look at the scene you are viewing that is
especially an impressive function when you are
seeing science fiction or adventure film.
• If you attempt to enter a number greater than
the total time of the current title, the time
Press ZOOM during play.
search box disappears, “
Input Invalid”
message is displayed on screen.
English - 39 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 3399
20.10.2009 16:45:10
Download from Www.Somanuals.com. All Manuals Search And Download.
number of times until “Subtitle Off” appears
on the screen.
2X” is displayed on the screen and the
picture is now larger. By pressing ZOOM key
Changing Audio Soundtrack Language
It is possible to change the audio language
from the one selected at the initial settings to a
different language, if available.
consecutively you can reach “
3X”, “
4X, 1/2x, 1/3x
1/4x” modes.
NOTE: You can move in the picture, i.e. change
the zoomed location, by using the “ ” (Left) or
“ ” (Right) / “ ” (Down) / “ ” (Up) arrow keys.
(This operation works only with discs on which
multiple audio soundtrack languages are
recorded, if not prohibited by the DVD.)
To return to normal play
Press ZOOM again.
Press LANG. during play.
Press LANG. a number of times until the
preferred language is selected.
Displaying / Changing Subtitle
Language
For your convenience:
• When the preferred language is not selected
even after pressing the button several times,
it means that the language is not available
on the disc.
It is possible to change the subtitle language
from the one selected at the initial settings to a
different language, if available.
(This operation works only with discs on which
multiple subtitle languages are recorded.)
• When the power is turned on or the disc is
removed, the language heard is the one
selected at the initial settings. If this language
is not recorded on the disc, only the available
language on the disc will be heard.
Press SUBTITLE during play.
When no subtitles are recorded “ ” will be
displayed instead of the selected language.
Press SUBTITLE a number of times until the
preferred language is selected.
Viewing From Another Angle
Some DVD discs may contain scenes, which
have been shot simultaneously from a number
of different angles. For these discs, the same
scenes can be viewed from each of these
different angles using the ANGLE button.
When this button is pressed once, the first
subtitle recorded on the disc will display. The
rest of the subtitles recorded will display in
sequence for every press of the SUBTITLE
button
Thenumberofrecordedanglesdiffersdepending
on the disc used.
NOTE:
<?> In some cases, the subtitle language is not
changed immediately to the selected one.
“
y/x ” is displayed shortly on the screen
during playback. This indicates that the multi-
angle scene has just started. From that moment
on, the yth angle of total x angles is played and
you can change the viewing angle until the end
of the multi-angle scene.
For your convenience:
• When the preferred language is not selected
even after pressing the button several times,
it means that the language is not available
on the disc.
Press ANGLE during play.
• When the player is restarted or the disc is
changed, the subtitle selection is automatically
changed back to the initial settings.
The current angle is changed.
Press ANGLE a number of times until the
preferred viewing angle is selected.
• If a language is selected, which is not
supported by the disc, the subtitle language
will automatically be set to the disc’s priority
language.
• This function will only work on discs where
different angles have been recorded.
• Usually a circulation will happen while
switching to another language, that is you can
cancel the subtitle by pressing this button a
English - 40 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4400
20.10.2009 16:45:10
Download from Www.Somanuals.com. All Manuals Search And Download.
Stopping play
Using a DVD Menu
• To stop the play permanently, press STOP (
) twice. When the STOP ( ) button is pressed
for the first time, a message “Press Play Key To
Continue” will appear on the screen to remind
you if you want to continue the play. To stop
the play, press the STOP ( ) button again or
you can press PLAY ( ) to continue.
Some DVD discs have unique menu structures
called DVD menus. For example, DVDs
programmed with complex contents provide
guide menus, and those recorded with various
languages provide menus for audio and subtitle
language. Although the DVD menus’ contents
and operation differ from disc to disc, the
following explains basic operation when this
feature is used.
Rapid Advance / Rapid Reverse
Press
play.
(or)
on the remote control during
Press TITLE on the remote control.
The DVD menu available on the disc is now
displayed.
• Normal play is resumed when the SELECT
button or PLAY ( ) button is pressed.
NOTE:
• The speed of advance (
8x, 16x, 32x) or reverse (
8x,
for every press of the
2x,
4x,
• If you press MENU, the root menu of DVD is
displayed.
2x,
4x,
16x,
32x) changes
button.
• If you press TITLE, the menu of the current
title is displayed.
(or)
Note: No sound will be heard during Rapid advance
or Rapid reverse.
Press “ ” / “ ” / “ ” / “ ” to select the preferred
item.
Skipping Ahead or Back to Chapters
Skipping ahead
Press SELECT.
The selected item is now executed.
For your convenience:
Press (
) on the remote control during play.
A track is skip ahead each time the button is
pressed.
• You can also use number keys to select a
DVD menu item. The player will automatically
execute the item. To enter an item number
Skipping back
which is more than 1 digit, press +10 key and Press (
then enter the item number.
) on the remote control during play.
A track is skip back each time the button is
pressed.
NOTE:
• Some DVDs may not contain root and/or title
menus.
Still Picture (PAUSE)
Press PAUSE ( ) once during play. The screen
freezes.
• To resume the playback, select PLAY item in
DVD menu.
To return to normal play press PLAY (
again.
)
Video CD Playback
Basic Play
The details differ depending on the disc
concerned. Also refer to the instructions
accompanying the disc.
Frame Advance (STEP Forward)
Press PAUSE ( ) once during play. The screen
freezes.
Press (
The next frame of the movie is displayed.
You can press ( ) for the following frames.
) on the remote control.
Press the number button(s) to select the
preferred item and press OK button.
The player now starts to play the selected
item.
NOTE: Reverse stepping is not available.
Slow- motion Play
NOTE:
Press PAUSE ( ) once during play. The screen
freezes.
• “ ” / “ ” / “ ” / “ ” arrow buttons can be used
for selecting items for video CDs.
English - 41 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4411
20.10.2009 16:45:10
Download from Www.Somanuals.com. All Manuals Search And Download.
• If “Single elapsed” is displayed, the elapsed
time for the title which is being played will be
displayed.
Press ( ) on the remote control.
You can increase or decrease the speed of the
slow-motion play by pressing SEARCH/SLOW
• If “Single remain” is displayed, the remaining
time for the title which is being played will be
displayed.
(
(or)
). There are 4 slow motion modes
as
1/16,
1/8, 1/4, 1/2.
The speed of slow motion play is displayed on
the screen each time you change it.
Pressing the INFO key again closes display
menu screen. “DISPLAY OFF” is diplayed.
To return to normal play press PLAY (
again.
)
Displaying a scene with a larger and closer
view.
NOTE: No sound will be heard during Slow motion
play.
CD Menu
CD Menu is used to display the directory
structure of data discs which would contain files
such as JPEG/MPEG/MP3 and to display the
tracks of Audio CDs.
NOTE: Reverse slow motion play is not available.
Direct Selection of Scenes
Selecting Scenes by Time
You can view the video CD, starting from any
time point you want.
Basic Play
1.Please insert a CD-R disc to the loader.
Press SEARCH MODE on the remote control
once time during playback.
“Loading” message appears on screen. Please
wait for a moment.
The time search box is displayed on the screen
as SELECT :_ _ / xx
CD MENU appears. Directories and the files in
the root directory are listed. (For Audio CD, the
tracks are listed.)
Player goes to entered track of the disc.
Press SEARCH MODE on the remote control
two times during playback.
2. Press “ ” or “ ” to select files or directories.
In the stop mode or while playing MP3 the user
can navigate in the current directory.
The time search box is displayed on the screen
as GOTO:_: _ _ : _ _
3. Press SELECT, “ ” or “ ” to switch between
directories & files.
Player goes to entered time of the current
track.
If a directory is selected and SELECT or “ ” key
is pressed then the selected directory content
is displayed after reading directory.
Enter the time using number buttons.
The title is played beginning from the desired
time just after you enter the time.
To switch from a sub directory to an upper
directory, press SELECT or “ ” key while the
top-most option in the directory (“...”) is selected
or press ““ ””.
For your convenience:
• If you attempt to enter a number greater
than the total time of the current title, the
time search box disappears and “
Invalid” message appears on up-left corner
of screen.
Input
4. Press SELECT on a file to play.
MP3/MPEG File
Selected MP3 / MPEG starts to play.
• If you give up entering the time simply
press RETURN button, and the operation is
cancelled.
Elapsed or Remaining Time can be displayed
using DISPLAY key and can be changed using
INFO key.
Convenient Functions
JPEG File :
Displaying the time information
Press INFO during play.
Selected JPEG is displayed in full screen and
Slide Show starts automatically.
Each time this button is pressed, a different time
information box is displayed on the screen.
During slideshow, you may change slide type
(effect) by pressing ANGLE button.
English - 42 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4422
20.10.2009 16:45:11
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD Track:
To return to normal play;
Elapsed or Remaining Time can be displayed Press ZOOM again.
using DISPLAY key and can be changed using
INFO key.
JPEG :
Press PLAY ( ) to start slide show.During
slideshow, you may change slide type (effect)
by pressing ANGLE button.
PAUSE
Press PAUSE ( ) once during play. The play
freezes.
It is provided both ZOOM in/out and Zoom pan
functions for JPEG pictures.
PAUSE message appears on screen.
Press ZOOM to turn on/off this function.
To return to normal play press PLAY (
again.
)
When this mode is on, a message will indicate
the current ratio on screen.
Stopping Play
Press STOP ( ).
The play is stopped.
If zoom mode is on,
Press
out.
/
to control the ratio of zoom in/
NOTE: If a JPEG file is displayed, pressing MENU
also stops the play.
The zoom ratios are %50 and %75 for zoom out
and %100, %125, %150 and %200 for zoom in.
(The order is: %50, %75, %100, %125, %150,
%200)(The initial ratio is %100)
MP3/MPEG File: CD MENU is displayed.
Rapid Advance (Rapid Reverse)
MP3/MPEG CD Track:
With ZOOM mode off, a picture is scaled to fit
Press SEARCH/SLOW (
or
) during play
the whole screen.
to decrease/increase play speed.
Note: Slide Show is disabled when the ZOOM mode
is on.
32x, 16x, 8x,
PLAY, 2x,
4x, 2x,
Repeat
4x,
8x,
16x,
Press REPEAT to change current repeat
mode.
32x are the play speed modes.
Skipping Ahead or Back to Tracks
In CD MENU it is displayed at the bottom.
The options available are:
Press SKIP/ FRAME (
jump to the previous/next file.
Next file in the current directory will be played.
Press SKIP/ FRAME (( ) ) during stop
/
) during play to
FOLDER: When this mode is selected, the
current folder will be played once.
/
mode to jump to the previous/next page of the
current directory.
SINGLE: When this mode is selected, the
current track will be played once.
ZOOM
MPEG:
REPEAT ONE: When this mode is selected, the
current track will be repeated continuously.
REPEAT FOLDER: When this mode is
selected, the current folder will be repeated
continuously.
This “zoom in” function enables you to take a
closer look at the scene you are viewing that is
especially an impressive function when you are
seeing science fiction or adventure film.
Display Function
Press ZOOM during play.
Press INFO to change displayed time mode.
There are two time modes :
• Single Elapsed
“
2X” is displayed on the screen and the
picture is now larger. By pressing ZOOM key
consecutively you can reach “
4X” modes.
3X”, “
• Single Remain
Time is displayed during MP3,MPEG andAudio
CD track playback.
NOTE: You can move in the picture, i.e. change the
zoomed location, by using the
) arrow keys.
(
) / ( ) / ( ) / (
English - 43 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4433
20.10.2009 16:45:11
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Type
Setup Menu
TV Type is only available as ‘PAL’. The TV set
also supports NTSC signal; however, the signal
will be converted to PAL when it appears on
the screen.
Press DISPLAY key on the remote control when
the player is not in playback mode.
The setup menu-main page appears. To close
the setup menu, press DISPLAY key.
LANGUAGE SETUP
MAIN PAGE
In the main page, the first page is selected by
default.
Select pages using
/
arrow buttons.
When selected, the page will be highlighted
and the items of the selected page will be
displayed.
Press SELECT or
selected page.
arrow button to enter
OSD LANG
When entered a page, the first item of the page
is selected and the sub-items of that item are
listed on the right.
You can select the default OSD language of the
player menus
AUDIO
NOTE: To return to main page, press arrow button.
To close the setup menu, press DISPLAY key.
You can select the default audio language if
supported by the DVD disc.
USING PAGES
DISC MENU
When entered a page, the first item of the page
is selected by default and the sub-items of the
selected item are listed on the right.
You can select the DVD’s disc menu language
among these languages. Disc menu appears
in the selected language, if supported by the
DVD disc.
Use arrow buttons to change the selected item
in the page.
SUBTITLE
The sub-items of the selected item are listed
on the right.
You can select the default subtitle language if
supported by the DVD disc.
Press SELECT or arrow button to select the
sub-items of the selected item.
PREFERENCES
The sub-item is selected on the right menu.
Use
/
arrow buttons to change the selected
sub-item.
Press SELECT to choose the selected sub-item
on the right menu.
DVD MENU ITEMS
VIDEO SETUP PAGE
DEFAULT
If you choose RESET and press SELECT, the
factory-presets are loaded. Parental level and
parental password does not change.
DOWNMIX
This mode can be selected when the digital
audio output of the TV is used.
SURROUND: Surround sound output.
English - 44 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4444
20.10.2009 16:45:11
Download from Www.Somanuals.com. All Manuals Search And Download.
STEREO: Two channels stereo.
PARENTAL (Parental Level)
Disc does not play
• No disc in the machine.
Place a disc into the loader.
• Disc incorrectly loaded.
Ensure that the DVD disc is in the drawer with the
label uppermost.
• Wrong type of disc. The machine cannot play
CD-ROMS etc.
• The region code of the DVD must match the
player.
Wrong OSD language
Playing some DVDs can be limited depending
on the age of users. The “Parental Control”
function allows playback limitation level to be
set by the parent.
• Select the language in the set-up menu.
• The language for the sound or subtitles on a
DVD cannot be changed.
• Multilingual sound and/or subtitles not recorded
on the DVD.
Parental Level can be adjusted to one of the
eight levels. Level “8 ADULT” adjustment let
you watch all of the DVD titles ignoring the DVD
disc’s parental level. You can watch the DVD
discs, which has the same or lower parental
level than the player’s level only.
• Try to change the sound or subtitles using
DVD’s title menu. Some DVD’s do not allow
the user to change these settings without using
the disc’s menu
PASSWORD (Change Password):
Some functions (Angle, Zoom etc) do
not work
Using this item you can change the current
password.
• These functions are not available on the
DVD.
To change the password you will be prompted to
enter your old password.After you have entered
your old password, you can now enter the new
4-digit password.
• Angle can only be changed when the angle
symbol is displayed.
No picture
You can use C key to delete the incorrect
entry.
• Have you pressed the correct buttons on the
remote control? Try once more.
Note: Factory preset of the password is “0000”. You
have to enter XXXX digital password every time you
want to change the parental level. If you forget your
password please contact technical service.
No sound
• Check the volume is set to an audible level.
• Make sure you have not switched the sound
off accidentally.
Troubleshooting
The picture quality is poor (DVD)
Distorted sound
• Make sure the DVD disc surface is not
damaged. (Scratch, fingerprint etc.)
• Check that the appropriate listening mode
setting is correct.
• Clean the DVD disc and try again.
No response from remote control
See instructions described in “Notes on Discs” to clean
your disc properly.
• Make sure the remote control is in the correct
mode.
• Ensure that the DVD disc is in the drawer with
the label uppermost.
• Check batteries are fitted correctly.
• Change the batteries.
• A damp DVD disc or condensation may effect
the equipment. Wait for 1 to 2 hours in Stand-
by to dry the equipment.
English - 45 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4455
20.10.2009 16:45:12
Download from Www.Somanuals.com. All Manuals Search And Download.
If nothing works
Time Number
If you have tried the above solutions and none This indicates the playtime, which has elapsed
seem to work, try switching your TV-DVD off from the start of a disc or a title. It can be used to
and on again. If this does not work, contact your find a specific scene quickly. (Not all discs permit
supplier or TV-DVD repair technician. Never the time search feature to be used. Availability
attempt to repair a defective TV-DVD yourself. is determined by the disc’s manufacturer.)
Title Number
Definition of Terms
Angle
These numbers are recorded on DVD discs.
When a disc contains two or more movies, these
Recorded onto some DVD discs are scenes,
movies are numbered as title 1, title 2, etc.
which have been simultaneously shot from a
Track Number
number of different angles (the same scene is
shot from the front, from the left side, from the
right side, etc.). With such discs, the ANGLE
button can be used to view the scene from
different angles.
These numbers are assigned to the tracks,
which are recorded on AudioCDs. They enable
specific tracks to be located quickly.
Dolby Digital
Chapter Number
Many movie theatres are equipped with 5.1
channel surround systems. This same type of
technology is available to you in your home.
To enjoy full 5.1-channel surround, your DVD
player must be connected to an external Dolby
Digital decoder via the digital outputs (either
coaxial or optical).
These numbers are recorded on DVD discs.
A title is subdivided into many sections, each
of which are numbered, and specific parts of
video presentations can be searched quickly
using these numbers.
DVD
Dolby Pro Logic
This refers to a high-density optical disc on
which high-quality pictures and sound have
been recorded by means of digital signals.
Incorporating a new video compression
technology (MPEG II) and high-density recording
technology. DVD enables aesthetically pleasing
full-motion video to be recorded over long
periods of time (for instance, a whole movie
can be recorded).
This is Dolby Laboratories’ technology to
decode Dolby Surround encoded programs
actively. Dolby Surround programs have four
channels of audio (Left, Center, Right and
Surround) encoded into a standard 2-channel
stereo signal. The rear channel is monaural.
LPCM
LPCM stands for Pulse Code Modulation and
is digital audio.
DVD has a structure consisting of two 0.6-mm
thin discs, which are adhered to each other.
Since the thinner the disc, the higher the density
at which the information can be recorded, a DVD
disc has a greater capacity than a single 1.2 mm
thick disc. Since the two thin discs are adhered
to each other, there is the potential to achieve
double-sided play sometime in the future for
even longer duration play.
MPEG
Short for Moving Picture Experts Group. This
is an international standard for compression of
moving images. On some DVDs digital audio
has been compressed and recorded in this
format.
Subtitles
These are printed lines appearing at the bottom
of the screen, which translate or transcribe
the dialogue. They are recorded on the DVD
discs.
English - 46 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4466
20.10.2009 16:45:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported File Formats for USB & MC Modes
Format
Audio
MPEG1 MPEG Layer 1/2/3
Remarks
File
Media
Extension
Video
(Maximum resolution/Bit rate etc.)
.mpg/ .dat/
.vob
MPEG2
MPEG4
MS ISO
MPEG4
MPEG2
PCM/MP3
Movie
.avi
-
PCM/MP3
Support SP and ASP
-
PCM
Sample Rate: 8K ~ 48KHz
MPEG 1/2
Music
Photo
Sample Rate: 8K ~ 48KHz, Bit Rate:
64K~320Kbps
.mp3
-
Layer 1/ 2/
3 (MP3)
WxH = 8902x8902 up to 77 Mega-pixel
Baseline
JPEG
Support format: 444/ 440/ 422/ 420/ Grayscale
.jpg
Up to 4 Mega-pixel
Progressive
JPEG
Support format: 444/ 440/ 422/ 420/ Grayscale
.ssa
.ass
.srt
.smi
.sub
External
Subtitles
Support Text File Format, but do not support
Picture File Format
Supported Memory Card Types
•SD (Secure Digital ™)
•MMC (Multi Media Card ™)
•MS (Memory Stick ™)
• MS PRO (Memory Stick Pro ™)
“Memory Stick” is a trademark of Sony Corporation.
“Secure Digital” is a trademark of SD Card Association.
“MULTIMEDIACARD” is a trademark of MultiMediCard Association
(MMCA).
English - 47 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4477
20.10.2009 16:45:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Types Compatible with This Unit
This player can play the following discs.
D
i
s
c
o
T
g
y
o
p
s
e
)
s
R
e
c
o
r
d
e
i
n
g
D
i
s
c
S
i
z
e
M
a
y
x
.
C
h
a
r
a
c
t
e
r
i
s
t
i
c
s
(
L
T
y
p
s
P
l
a
i
n
e
g
T
i
m
S
i
n
g
l
e
0
-
D
V
D
D
d
V
D
c
o
o
D
n
o
t
a
i
n
y
s
D
e
i
x
g
c
e
a
l
l
l
e
a
n
n
t
d
s
M
o
u
P
n
E
d
G
a
n
d
S
v
i
d
e
m
o
s
s
i
i
d
d
e
d
;
2
4
m
i
i
n
n
.
.
•
•
1
2
c
m
m
u
e
t
l
b
i
t
-
2
y
s
t
e
.
D
o
u
b
l
e
-
A
V
u
d
i
o
e
d
;
4
8
0
m
+
S
i
n
g
l
e
-
V
e
m
a
a
r
i
o
u
y
s
s
s
e
c
e
r
c
e
t
e
e
n
d
a
t
n
h
d
a
u
d
i
o
f
u
n
o
c
n
t
i
o
c
n
r
s
c
n
a
n
b
e
i
d
e
o
s
i
d
e
d
;
8
0
m
i
n
.
s
i
n
l
l
r
o
u
g
h
t
h
e
s
e
e
8
c
m
D
o
u
1
b
6
l
e
0
-
m
e
u
.
s
i
d
e
d
;
i
n
.
A
U
D
I
O
-
C
D
A
m
D
n
o
L
r
i
s
d
P
e
i
d
s
r
e
c
o
r
d
e
.
i
a
v
d
C
a
s
i
e
e
a
s
n
e
r
d
a
c
a
n
o
a
d
d
l
o
g
d
o
s
a
q
a
i
s
u
g
a
n
a
l
a
l
w
i
t
h
•
1
2
c
7
2
4
0
m
m
i
n
n
.
i
s
t
i
o
a
o
g
r
r
t
i
o
n
w
n
o
D
r
e
s
r
e
i
i
g
t
a
d
l
i
S
t
u
n
a
i
t
l
o
y
t
h
b
t
t
u
t
i
t
y
,
o
l
e
s
u
s
t
i
n
e
d
r
l
i
s
e
e
e
r
i
o
r
t
i
o
n
f
A
u
d
i
o
a
i
o
q
l
t
m
.
8
c
m
i
.
D
I
G
I
T
A
L
A
U
D
I
O
M
P
3
-
C
D
1
2
c
m
M
P
t
s
e
3
i
r
d
t
s
r
e
d
c
o
r
r
d
q
a
e
u
d
a
o
a
s
y
o
a
l
f
D
i
s
d
g
i
d
o
t
a
l
S
i
r
g
t
n
a
n
l
w
i
t
d
h
•
b
e
t
e
a
u
i
o
l
i
t
,
e
s
i
s
q
t
o
i
o
a
n
A
u
x
d
i
o
l
e
s
r
e
t
e
r
i
o
t
i
n
a
u
i
u
a
l
i
t
y
o
v
i
m
e
.
(
x
x
x
.
i
m
p
u
3
)
R
E
A
D
A
B
L
E
8
c
m
P
I
C
T
U
R
E
-
C
D
1
2
c
m
J
b
P
e
E
t
G
i
s
i
r
c
e
c
r
o
e
r
d
q
e
u
d
a
s
y
a
D
i
g
i
t
m
a
l
S
i
g
n
a
l
w
i
t
h
V
i
d
e
c
o
•
t
e
r
p
t
u
a
l
i
t
o
v
e
r
t
i
e
.
(
s
t
i
l
l
p
t
r
e
)
J
P
E
G
R
E
A
D
A
B
L
E
8
c
m
English - 48 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4488
20.10.2009 16:45:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG
DVD: SS/SL 4.7” (DVD-5)
SS/DL 4.7” (DVD-9)
DS/SL 4.7” (DVD-10)
Types of Discs
Supported
DS/DL 4.7” (DVD-18)
CD-DA
CD-R
CD-RW
MP-3/JPEG
MPEG-2 Video Standard Decoding (MPEG-1 supported)
Full-Screen Video Display of 720 x 576 (PAL) &
720 x 480 (NTSC) pixels
Video Type
50 and 60 Hz frame refresh rates (PAL & NTSC)
Digital bit-stream processing rate up to 108Mbits/sec
Line resolution more than 500 lines
Dolby Digital Decoding
MPEG Multichannel Decoding
LPCM
Audio Type
Digital Audio Outputs:
IEC 958
TOSLINK
Audio Output
Analog Outputs:
24 bit /48, 44.1kHz down-sampling DAC
English - 49 -
[GB]_MB25_(02-DVD)_1900UK_PEUIDTV_NICKEL5_(WODIVX_WOVCD)_100655884411..iinndddd 4499
20.10.2009 16:45:12
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|