Technika CRT Television LCD32 209X User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Analogue TV Menu System.................................. 17

Picture Menu..................................................... 17

Sound Menu ..................................................... 18

Feature Menu ................................................... 19

Install Menu ...................................................... 20

Source Menu .................................................... 21

PC Mode Menu System........................................ 22

PC Position Menu............................................. 22

Displaying TV Information .................................... 22

Mute Function....................................................... 22

Picture Mode Selection......................................... 22

Freezing Picture ................................................... 22

Zoom Modes......................................................... 23

Auto .................................................................. 23

16:9................................................................... 23

4:3..................................................................... 23

Panoramic......................................................... 23

14:9................................................................... 23

Cinema ............................................................. 23

Subtitle.............................................................. 23

Zoom................................................................. 23

Teletext................................................................. 24

Tips....................................................................... 24

Image Persistence............................................ 24

No Power.......................................................... 24

Poor Picture...................................................... 24

No Picture......................................................... 24

Sound ............................................................... 24

Remote Control................................................. 24

Input Sources.................................................... 24

Appendix A: PC Input Typical Display Modes....... 25

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types).............................................. 26

Speciﬁcations ....................................................... 27

Important Instruction............................................. 28

Accessories............................................................ 2

Features ................................................................. 2

Introduction............................................................. 2

Preparation............................................................. 2

Safety Precautions ................................................. 2

Power Source..................................................... 2

Power Cord......................................................... 2

Moisture and Water ............................................ 2

Cleaning.............................................................. 3

Heat and Flames ................................................ 3

Lightning............................................................. 3

Replacement Parts............................................. 3

Servicing............................................................. 3

Waste Disposal................................................... 3

Information for Users in European Union

Countries ............................................................ 3

Disconnecting the Device................................... 3

Headphone Volume............................................ 3

Installation........................................................... 3

LCD Screen........................................................ 3

Warning .............................................................. 3

Overview of the Remote Control ............................ 4

LCD TV and Operating Buttons.............................. 5

Viewing the Connections- Back Connectors .......... 5

Viewing the Connections - Side Connectors .......... 6

Power Connection.................................................. 6

Aerial Connection................................................... 6

Connecting the LCD TV to a PC............................. 7

Connecting to a DVD Player................................... 7

Using Side AV Connectors ..................................... 8

Connecting Other Equipment via Scart.................. 8

Inserting Batteries into the Remote Control

Handset.................................................................. 8

Switching the TV On/Off......................................... 8

To Switch the TV On........................................... 8

To Switch the TV Off........................................... 8

Input Selection........................................................ 9

Basic Operations.................................................... 9

Operation with the Buttons on the TV................. 9

Initial Settings......................................................... 9

General Operation................................................ 10

Electronic Programme Guide (EPG) .................... 10

Displaying Subtitles .......................................... 10

Digital Teletext (** for UK only) ..........................11

Analogue Teletext ..............................................11

Widescreen........................................................11

IDTV Menu System ...............................................11

Channel List.......................................................11

Timers............................................................... 13

Conditional Access ........................................... 13

TV Setup........................................................... 13

Setup ................................................................ 13

English - 1 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:22

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessories

Introduction

Thank you for choosing this product. This manual will

guide you for the proper operation of your

TV. Before operating the TV, please read

this manual thoroughly.

Please do keep this manual in a safe place

for future references.

Batteries: 2 X AAA

Preparation

For ventilation, leave a free space of at least 10 cm

all around the set. To prevent any fault and unsafe

situations, please do not place any objects on top

of the set.

Use this device in moderate climates.

Remote

Controller

Instruction Book

Features

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• HDMI connectors for digital video and audio. This

connection is also designed to accept high deﬁnition

signals.

Safety Precautions

Please read the following recommended

safety precautions carefully for your

safety.

• 200 programmes from VHF, UHF(analogue).

• 500 programmes for digital mode (IDTV).

• OSD menu system.

Power Source

The TV set should be operated only from a 220-240

VAC, 50 Hz outlet. Ensure that you select the correct

voltage setting for your convenience.

• Scart socket for external devices (such as video,

video games, audio set, etc.).

• Stereo sound system.

Power Cord

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer.

Do not place the set, a piece of furniture, etc. on the

power cord (mains lead) or pinch the cord. Handle the

power cord by the plug. Do not unplug the appliance

by pulling from the power cord and never touch the

power cord with wet hands as this could cause a short

circuit or electric shock. Never make a knot in the cord

or tie it with other cords. The power cords should be

placed in such a way that they are not likely to be

stepped on. A damaged power cord can cause ﬁre or

give you an electric shock. When it is damaged and

needs to be replaced, it should be done by qualiﬁed

personnel.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected, after 5 minutes the

TV switches automatically to standby mode.

• PLL (Frequency Search).

• PC input.

Moisture and Water

Do not use this device in a humid and

damp place (avoid the bathroom, the

sink in the kitchen, and near the washing

machine). Do not expose this device to

rain or water, as this may be dangerous

and do not place objects ﬁlled with liquids,

such as ﬂower vases, on top. Avoid from

dripping or splashing.

• Plug&Play for Windows 98,ME,2000,XP, Vista.

• Game Mode

English - 2 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:23

Download from Www.Somanuals.com. All Manuals Search And Download.

If any solid object or liquid falls into the cabinet, unplug

the TV and have it checked by qualiﬁed personnel

before operating it any further.

Information for Users in European

Union Countries

This symbol on the product or on its

packaging means that your electrical

and electronic device should be

disposed at the end of its service life

separately from your household wastes.

There are separate collection systems

for recycling in EU.

Cleaning

Before cleaning, unplug the TV set

from the wall outlet. Do not use liquid or

aerosol cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set are intended for

ventilation and to ensure reliable operation. To prevent

overheating, these openings must not be blocked or

covered in anyway.

For more information, please contact

the local authority or the dealer where you purchased

the product.

Disconnecting the Device

Heat and Flames

The mains plug is used to disconnect TV set from

the mains and therefore it must remain readily

operable.

The set should not be placed near to open

ﬂames and sources of intense heat such

as an electric heater. Ensure that no open

ﬂame sources, such as lighted candles,

are placed on top of the TV. Batteries

should not be exposed to excessive heat

such as sunshine, ﬁre or the like.

Headphone Volume

Excessive sound pressure from earphones

and headphones can cause hearing loss.

Installation

Lightning

To prevent injury, this device must be securely

attached to the wall in accordance with the installation

instructions when mounted to the wall (if the option

is available).

In case of storm and lightning or when

going on holiday, disconnect the power

cord from the wall outlet.

Replacement Parts

LCD Screen

When replacement parts are required, make sure that

the service technician has used replacement parts,

which are speciﬁed by the manufacturer or have the

same speciﬁcations as the original one. Unauthorized

substitutions may result in ﬁre, electrical shock or

other hazards.

The LCD panel is a very high technology product with

about a million thin ﬁlm transistors, giving you ﬁne

picture details. Occasionally, a few non-active pixels

may appear on the screen as a ﬁxed blue, green or

red point. Please note that this does not affect the

performance of your product.

Servicing

Warning

Please refer all servicing to qualified

personnel. Do not remove the cover

yourself as this may result in an electric

shock.

Do not leave your TV in standby or operating mode

when you leave your house.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable and

should principally be recycled. Packaging materials,

such as foil bag, must be kept away from children.

• Batteries, including those which are heavy metal-

free, should not be disposed of with household

waste. Please dispose of used battery in an

environment friendly manner. Find out about the

legal regulations which apply in your area.

• Cold cathode fluorescent lamp in LCD PANEL

contains a small amount of mercury; please follow

the local laws or regulations for disposal.

English - 3 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:23

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview of the Remote Control

1. Standby

2. Yellow (Feature menu) / Current language

(in DTV mode) (*)

3. Blue (Install menu)

4. Previous programme

5. Cursor up

6. Cursor right

7. Cursor down

8. TV / Digital TV

9. Mono/Stereo - Dual I-II

2 0

2 1

2 2

10. Programme up / Page down (in DTV

mode) /Programme down / Page up (in

DTV mode)

11. Numeric buttons

12. Exit (in DTV mode)

13. Hold (in TXT mode)

14. Update (in TXT mode) / No function

15. Index page / Guide (in DTV mode)

16. Reveal (in TXT mode) / Switch from TV to

17. Green (Picture menu)

18. Red (Sound menu)

19. Menu

20. OK / Select

21. Cursor Left

22. AV / Source

23. Info

24. Volume up/down

25. Mute

26. Picture mode selection

27. Time / Subtitle on-off (in DTV mode) (**)

28. Teletext / PAT mode

29. Mix (in TXT mode) / No function

30. Expand (in TXT mode) / Image size

(*) Only available for EU country options.

(**) Only available for UK.

Remote range is approximately 7m/23ft

English - 4 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:24

Download from Www.Somanuals.com. All Manuals Search And Download.

LCD TV and Operating Buttons

FRONT and REAR VIEW

SIDE VIEW

Control Buttons

1. Standby button

TV/AV

P/CH

2. TV/AV button

3. Programme Up/Down

buttons

4. Volume Up/Down buttons

TV/AV

P/CH

Note: Press “

” /“

”

buttons at the same time to view

main menu.

Viewing the Connections- Back Connectors

1. SCART socket inputs or outputs for external devices.

Connect the SCART cable between SCART socket on TV and SCART

socket on your external device (such as a decoder, a VCR or a DVD

player).

Note: If an external device is connected via the SCART socket, the TV

will automatically switch to AV mode.

2. PC Input is for connecting a personal computer to the TV set.

Connect the PC cable between the PC INPUT on the TV and the PC

output on your PC. Please do not connect a device to YPbPr socket

while using PC input..

3. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.

4. RF Input connects to an antenna or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the

device to the television with an appropriate antenna cable, as shown in the illustration in the following

pages.

5. HDMI 2: HDMI input

6. HDMI 1: HDMI input

HDMI Input is for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Deﬁnition pictures from devices such as a High

Deﬁnition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets

or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p

signals. No sound connection is needed for an HDMI to HDMI connection.

When you use the wall mount kit (optional) with the LCD TV, we would deﬁnitely recommend to plug all your cables into the

back of the LCD before mounting to the wall.

English - 5 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:24

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the

channels that you subscribe to. For more information, see “Conditional

Access” section.

2. Component Video Inputs (YPbPr) are used for connecting component

video.You can connect the component video and audio sockets with a device

that has component output. Connect the component video cables between

the COMPONENT VIDEO INPUTS on on the TV and the component video

outputs of your device. While connecting, be sure that the letters on your TV,

“Y”, “Pb”, “Pr” correspond with your device’s connectors.

IMPORTANT:Please do not connect a device to PC socket while using YPbPr input.

3. Video Input is used for connecting video signals of external devices.Connect

the video cable between the VIDEO IN socket on the TV and the VIDEO

OUT jack on your device.

4. Audio Inputs are used for connecting audio signals of external devices.

Connect the audio cable between the AUDIO INPUTS on the TV and the

AUDIO OUTPUT jacks on your device.

Also to enable PC/YPbPr sound connection in such a case, use an

appropriate audio cable between the connected device’s audio outputs and

the TV’s audio inputs

Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable

you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable

audio.

5. Headphone jack is used for connecting an external headphone to the system. Connect to the

HEADPHONE jack to listen to the TV from headphones.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the

mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

English - 6 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:25

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the LCD TV to a

For displaying your computer’s screen image on

your LCD TV, you can connect your computer to the

TV set.

Connecting to a DVD Player

If you want to connect a DVD player to your LCD

TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer

to your DVD player’s instruction book for additional

information. Power off both the TV and the device

before making any connections.

• Power off both computer and display before making

any connections.

Note: Cables shown in the illustration are not supplied.

• Use 15-pin D-sub display cable to connect a PC

to the LCD TV.Use an audio cable between audio

inputs of the TV (side) and audio output of your PC

to enable sound connection.

• If your DVD player has an HDMI socket, you can

connect via HDMI. When you connect to DVD player

as illustrated below, switch to HDMI source. See,

“Input Selection” section.

• When the connection is made, switch to PC source.

See “Input selection” section.

• Most DVD players are connected through

COMPONENT SOCKETS. Use a component

video cable to connect video input. To enable sound

connection, use AUDIO IN located side of the TV

(YPbPr cable is not supplied).

•Settheresolutionthatsuitsyourviewingrequirements.

Resolution information can be found in the appendix

parts.

• When the connection is made, switch to YPbPr

source. See, “Input selection” section.

• You may also connect through the SCART socket.

Use a SCART cable as shown below.

(

)

(

)

(

)

Note: These methods of connection perform the same

function but in different levels of quality. It is not necessary

to connect by all three methods.

English - 7 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:26

Download from Www.Somanuals.com. All Manuals Search And Download.

Using Side AV Connectors

Inserting Batteries into the

Remote Control Handset

• Remove the battery cover located on the back of

the handset by gently pulling backwards from the

indicated part.

You can connect a range of optional equipment

to your LCD TV. Possible connections are shown

below. Note that cables shown in the illustration are

not supplied.

• For connecting a camcorder, connect to the VIDEO

IN socket and the AUDIO SOCKETS. For selecting

the related source, see the section “Input selection”

in the following parts.

• Insert two AAA/R3 or equivalent type batteries

inside. Place the batteries in the right directions and

replace the battery cover.

• To listen the TV sound from headphones, connect

to the HEADPHONE jack of theTV

Connecting Other Equipment

via Scart

Most devices support SCART connection. You can

connect a; DVD recorder, a VCR or a decoder to

your LCD TV by using the SCART socket. Note that

cables shown in the illustration are not supplied.

Power off both the TV and the devices before making

any connections.

Note: Remove the battery from remote control handset when

it is not to be used for a long period. Otherwise it can be

damaged due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

• Connect the power cord to the 220-240V AC 50

Hz.

For more information, refer to your device’s own

instruction book.

• Press STANDBY switch. Then the standby LED

lights up.

• To switch on the TV from standby mode either:

• Press the “ ” button, P+ / P- or a numeric button

on the remote control.

• Press the -P/CH or P/CH+ button on the TV. The TV

will then switch on.

Note: If you switch on your TV via PROGRAMME UP/DOWN

buttons on the remote control or on the TV set, the programme

that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Press the “ ” button on the remote control or

press the STANDBY switch, so the TV will switch

to standby mode.

• To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched to standby mode,

standby LED can blink to indicate that features such

as Standby Search, Over Air Download or Timer is

active.

English - 8 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:27

Download from Www.Somanuals.com. All Manuals Search And Download.

• Functions of the menu system are described in the

following sections.

Input Selection

Once you have connected external systems to your TV,

you can switch to different input sources.

Volume Setting

• Press “

” button to increase the volume. Press “

• Press “

changing sources.

” button on your remote control for directly

” button to decrease the volume. A volume level

scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

• Press “P -” button to select the previous programme.

• Press “P +” button to select the next programme.

• Select “Source” option from the main menu by

using “ ” or “ ” button. Use then “ ” or

“

” button to highlight an input and press “ ” button

to select.

Note: You can mark desired source options by pressing the

Programme Selection (Direct Access)

OK button. Therefore, when “

” button is pressed, only

• Press numeric buttons on the remote control to select

programmes between 0 and 9. The TV will switch to the

selected programme. To select programmes between

10-500 (for IDTV) or 10-199 (for analogue), press the

numeric buttons consecutively

the marked source options will be available (except for the

TV source).

• Press directly the programme number to reselect single

digit programmes

Initial Settings

When theTV is turned on for the ﬁrst time, the menu for the

language selection appears on the screen. The message

“Welcome please select your language!” is displayed in all

language options sequentially in the OSD.

By pressing the “ ” or “ ” buttons highlight the language

you want to set and press OK button.After then, “First time

installation” OSD will appear on the screen. By pressing “

” or “ ” buttons, select the country you want to set and

press OK button (* for EU countries).

Basic Operations

You can operate your TV using both the remote

control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press “

” button to decrease volume or

buttontoincreasevolume, soavolumelevelscale(slider)

will be displayed on the screen.

Note: Country selection OSD will not be available for UK.

Press OK button on the remote control to continue and the

following message will be displayed on the screen:

Programme Selection

•Press“P/CH+”buttontoselectthenextprogrammeor“P/

CH -” button to select the previous programme.

Viewing Main Menu

•Press“

”/“

”buttonsatthesametimetoview

mainmenu. IntheMainmenuselectsub-menuusing“P/

CH -” or “P/CH +” buttons and enter the sub-menu using

• To select the “Yes” or “No” option, highlight the item by

using “ ” or “ ” buttons and press the “OK” button.

“

” or “

” buttons. To learn the usage of the

menus, refer to the menu system sections.

The IDTV will automatically tune to the UHF or VHF(*)

(* for EU countries) transmission channels, searching

for digital terrestrial TV broadcasts and displaying the

names of channels found. This process will take about

a few minutes.

AV Mode

• Press the “TV/AV” button in the control panel on the TV

to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to control all

the functions of the model you selected. The functions

will be described in accordance with the menu system

of your TV.

English - 9 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd

18.02.2010 15:44:28

Download from Www.Somanuals.com. All Manuals Search And Download.

Electronic Programme Guide (EPG)

• Some, but not all, channels send information about

the current and next events. Press EPG button to

view the EPG menu. EPG appears on the screen. It

is able to get Information of the channel - programs

weekly by means of 7-DAY-EPG. All programs of

channels are displayed. On the bottom of the screen;

info bar, showing all the available commands, will

be displayed.

After Automatic Search is completed, the following

message asking for analogue channel search appears

on the screen:

To search for analogue channels, select “Yes”. TV

switches to the analogue TV mode. The menu is

displayed to search for analogue channels.

RED button (Shrink): makes the info boxes smaller.

GREEN button (Expand): makes the info boxes larger.

Select your Country, Language and Text language by

using “ ” or “ ” and “ ” or “ ” buttons. Press OK or

RED button to continue. To cancel, press the BLUE

button.

YELLOW button (Prev. Day): displays the programmes

of previous day.

BLUE button (Next day): displays the programmes of

the next day.

For more information on this process, see “Install Menu”

section.

INFO (Details): displays the programmes in detail.

Note: For proper functioning of digital teletext in DTV mode, you

should set country as UK in analogue AUTO PROGRAMME (for

UK broadcasts only).

Numeric buttons (Jump): go to preferred channel

directly via numeric buttons.

OK : view for current broadcast/reminders for future

programs.

Do not turn off the TV while initializing ﬁrst time installation.

SWAP : jumps to the current broadcast.

General Operation

• Press “0” button on the remote control to view Guide

Search menu. Using this feature, you can search the

programme guide database in accordance with the

genre selected or with name match.

Press the “

” button on the remote control and select

DTV to switch the TV set to digital terrestrial television

broadcasting.

Information Banner

Displaying Subtitles

With digital terrestrial broadcasting (DVB-T), some

programmes are being broadcasted with subtitles.

• Whenever you change channel, using the P- / P+ button

or the numeric buttons, the TV displays the broadcast

picture along with an information banner at the bottom

of the screen (available only in DTV mode). This will

remain on the screen for a few seconds.

Press the “M” button to display the main menu, highlight

the Setup and then Language menu using “ ” or “

”

button and press the OK button to display the “Language

settings” menu.

• The information banner can also be displayed at any

time while watching TV by pressing the “INFO” button

on the remote control:

Highlight the “Subtitle” item in “Language settings”

menu and use ” or “ button to set Subtitle to the

desired language.

If “Subtitle” is on and a language option is set, pressing

the “ ” button causes the following warning message

display on the screen (** for UK only):

If the selected channel is locked, you must enter the

correct four numeric code to view the channel. “Enter

PIN” will be displayed on the screen in such a case:

English - 10 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 10

18.02.2010 15:44:28

Download from Www.Somanuals.com. All Manuals Search And Download.

Digital Teletext (** for UK only)

• Press the “ ” button.

IDTV Menu System

Press the “M” button. Main menu will be displayed.

• The digital teletext information appears.

• Operate it with the coloured buttons, cursor buttons

and OK button.

The operation method may differ depending on the

contents of the digital teletext.

Follow the instructions displayed on digital teletext

screen.

• When Press “SELECT” button or similar message

appears on the screen, press the OK button.

• When the “ ” button is pressed, the TV returns to

television broadcasting.

• With digital terrestrial broadcasting (DVB-T), in

addition to digital teletext broadcasting together with

the normal broadcasting, there are also channels

with just digital teletext broadcasting.

Channel List

Using the “ ” or “ ” button on the remote control, make

sure that the ﬁrst item, Channel List, is highlighted and

press the “OK” button to display the Channel List.

• The aspect ratio (picture shape) when watching

a channel with just digital teletext broadcasting is

the same as the aspect ratio of the picture viewed

previously.

• When you press the “ ” button again, the digital

teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to

the analogue text system. Please do refer to the

“TELETEXT” explanations.

Navigating the Entire Channel List

Widescreen

Depending on the type of the broadcast being

transmitted, programmes can be viewed in a number

of formats. Press the “

change screen format.

Press “ ” or “ ” button for selecting the previous or next

channel. You can press “RED” or “GREEN” button to

move page up or page down.

” button repeatedly to

To watch a speciﬁc channel, highlight it using “ ” or “

” button and then press “OK” button, while the “Select”

item on Channel List menu is highlighted by using “

” or “ ” button.

When Auto is selected, the format being displayed is

determined by the picture being broadcasted.

PLEASE NOTE: Menu size changes depending on the

Then the name and number of the selected channel will

be displayed in the top-left and top-right of the channel

display at the top-right of the screen, respectively.

chosen image size.

Notice !

AC3 audio type is not supported. In this case, Tv

sound will be muted. If the broadcast includes AC3

stream, the following warning message will be

displayed on the screen:

Moving the channels in the channel list

• Press “ ” or “ ” buttons to select the channel that

will be moved.

• Press “ ” or “ ” buttons to select the “Move” item on

Channel List menu.

Following OSD will be displayed next to “OK” item

to indicate that enter a number by using the numeric

buttons on the remote control and press “OK” to

conﬁrm.

If there is no audio available, the following warning

message will be displayed on the screen:.

English - 11 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 11

18.02.2010 15:44:29

Download from Www.Somanuals.com. All Manuals Search And Download.

Now pressing “ ” or “ ” button moves to the previous/

next character. Pressing “ ” or “ ” button toggles

the current character, i.e., ‘b’ character becomes ‘a’

by “ ” and ‘c’ by “ ”. Pressing the numeric buttons

‘0...9’ replaces the highlighted character with the

characters printed above the button one by one as

the button is pressed.

Press the “M” button to cancel the editing or OK button

to save the new name.

Adding Locks to Channels

Channel locking provides a password-protected

access to channels selected by parents. In order to

lock a channel you should know the parental lock

password (default value is set to 0000 in the factory

and can only be changed from the Conﬁguration

menu).

Note: If you enter the same programme number of the channel

that you want to move, “.... channel services will be replaced.

Do you want to continue?” OSD will be displayed. Press OK

to conﬁrm or select “No” to cancel.

Deleting the Channels in the Channel List

• Press “ ” or “ ” button to select the channel that

will be deleted.

Select the channel to be locked by highlighting it and

select the Lock option by pressing “ ” or “ ” button.

When the “OK” button is pressed, a dialog OSD asking

for the password will be displayed.

• Press “ ” or “ ” button to select the “Delete’’ item

on Channel List menu.

• Press the “OK” button to delete the highlighted

channel in the channel list. Then the message below

appears on the screen:

Enter the password by using the numeric buttons on

the remote control. The lock icon “ ” will now be

displayed next to the selected channel. Repeat the

same operation to cancel the lock.

• Press “ ” or “ ” button to highlight the desired

option. If “OK” button is pressed while “Yes” is

highlighted, the highlighted channel is deleted.

Selecting “No” cancels the deletion.

Setting Favourites

To set a favourite you should highlight the “Favourites”

item at the bottom of the Channel List menu. Then

press “OK” button and Edit Favourite List menu

appears on the screen.

Renaming Channels

To rename a speciﬁc channel, the channel must

be highlighted by pressing “ ” or “ ” button. Then

highlight the Edit Name item by pressing “ ” or “

”

button as illustrated below. Press the “OK” button to

activate the rename feature.

How to Add a Channel to a Favourites List

• By pressing “ ” or “ ” buttons, highlight the channel

that you want to add to the favourite list.

English - 12 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 12

18.02.2010 15:44:29

Download from Www.Somanuals.com. All Manuals Search And Download.

• By pressing “OK” button, the highlighted channel is Repeat: You can set a timer to be repeated as Once,

added to the Favourite List.

Daily or Weekly.

• F icon indicates that a channel is added to Favourite

List.

You can save the adjustments by pressing the GREEN

key or cancel the process by pressing the RED button.

You can edit the list via GREEN key and delete with

the RED button.

Removing a Channel from Favourite List

• Highlight the channel that you want to remove from

the favourite list and press OK button to remove.You

can press “OK” button again to re-add a channel.

Conditional Access

• Press the “M” button to display the main menu and

use the “ ” or “ ” button to highlight the “Conditional

Access” line and press the “OK” button:

• To activate Favourites, go to the Conﬁguration menu

and select Favourite mode. Use “ ” / “ ” to set

Favourite mode as on. To cancel Favourites, set

Favourite Mode to Off.

On Screen Help

Some Digital Terrestrial channels operate on a Pay

Per View basis. These require a subscription and a

hardware decoder.

For all menus, press the INFO button to display the

help information about the menu functions.

Obtain the Conditional Access Module (CAM) and the

viewing card by subscribing to a pay channel company,

then insert those to the TV using the following procedure.

• Switch off the TV and unplug from the mains.

Programme Guide

• The CAM should be correctly inserted, it is impossible

to insert fully if reversed. The CAM or the TV terminal

may be damaged if the CAM is forcefully inserted.

This section is same with the instructions given in

the General Operations page. Please see Electronic

Programme Guide (EPG) section in the General

Operations part.

• Connect theTV to the mains supply, switch on and then

wait for few moments until the card is activated.

• Some CAMs may require the following set up. Please

set the CAM by entering the IDTV menu, Conditional

Access then pressing the “OK” button. (CAM set up

menu is not displayed when it is not required.)

Timers

• To see the viewing contract information: enter IDTV;

press the “M” button, then highlight ConditionalAccess

and press the “OK” button.

• When no module is inserted, “No Conditional Access

module detected” message appears on the screen.

• Refer to the module instruction manual for details of

the settings.

Note: Insert or remove the CI module only when the TV is

switched off or in standby mode.

To display timers window, activate the item from the

main menu. To add a timer, press the YELLOW button

on the remote control. Then “Add Timer” window

appears.

TV Setup

You can use this item to display the TV functions.

The digital TV Setup menu screen is accessed from

the main menu. Press the “M” button to display the

main menu and use “ ” or “ ” button to highlight “TV

Setup”, press the “OK” button to display TV Setup

menu screen.

Channel: “ ” or “ ” keys will navigate the user

through the TV or Radio list.

Date: Starting date is entered via the Left/Right or the

numeric buttons.

Start: Starting time is entered via the Left/Right or

the numeric buttons.

End: Ending time is entered via the Left/Right or the

numeric buttons.

You can ﬁnd detailed information for all menu items in

“Analogue TV Menu System” section.

Change/Delete: permits or prohibits any modiﬁcations

for other users.

Setup

The adjustments in this menu are given as the following:

Duration: Duration between Start and End time.

English - 13 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 13

18.02.2010 15:44:30

Download from Www.Somanuals.com. All Manuals Search And Download.

channels will not be located while in automatic search

or manual search.

Use “ ” or “ ” button to select Scan Encrypted and

then press “ ” or “ ” button to set this setting as

On or Off.

Receiver Upgrade

Conﬁguration

Over Air Download (OAD)

You can conﬁgure the settings of your TV. Select

Conﬁguration from Setup menu and press “OK” to

view this menu. Press the “RETURN” button on the

remote control to exit.

This featture heelps too keepp yyour TVV updatted. Itt works

automaaticallly andd searcches foor new iinformmation

when avvailablle. Nottee that thhis settting is iinactiive to be

modiﬁed. Please ensure that the TV is set to standby

mode. The TV automatically powers up at 3.00 A.M.

each day and searches for any new information which

may be broadcasted and will download this to your

receiver automatically. This operation will normally

take approximately 30 minutes.

Note: Your TV may start in First Time Installation mode after

OAD update.

Parental Control

Use “ ” or “ ” buttons to go to Parental Lock option.

Press OK button to enter the menu. A dialog box

asking for the lock key will be displayed. The key is set

to “0000” initially. Enter PIN. If it is incorrect, “Wrong

Pin” OSD will be displayed. If it is correct, the Parental

Control menu will be displayed:

Dolby D Digital (* for EU countries only)

(optional)

In the Conﬁguration Menu, highlight the Dolby D item by

pressing “ ” or “ ” buttons. Use the “ ” or “ ” buttons

to set the Dolby D Digital as On or Off. If the channel that

you are watching supports Dolby Digital,you can turn this

setting on.

Hard of Hearing (* for EU countries only)

Use “ ” or “ ” button to select Hard of Hearing and

then press “ ” or “ ” button to set this setting as

On or Off.

Maturity Lock (*)

If the broadcaster enables any special signal

concerning the audio, you can set this setting as On

to receive such signals.

(*) If you set Country option as UK in the ﬁrst time

installation, Maturity Lock option will not be visible.

This setting is available only for EU countries.

Favourite Mode

When set, this option gets the maturity information

from the broadcast and if this maturity level is disabled,

does not show video-audio.

Use this function to enable or disable favourite

mode. Press “ ” / “ ” button to set this function as

on or off.

Menu Lock

Channel List

In menu lock you can set locking for all menus, or the

Installation Menu to restrict access to these menus.

If the menu lock is disabled, there will be free access

to the menu system. Use “ ” or “ ” buttons to go to

Menu Lock option. Use “ ” or “ ” buttons to choose

Menu Lock Mode.

Use “ ” or “ ” buttons to go to Channel List option.

Use “ ” or “ ” buttons to toggle Channel List Mode.

If you select “TV Only”, with the “ ” or “ ” buttons,

you navigate through only TV channels. If you select

“Radio Only”, with the “ ” or “ ” buttons, you navigate

through only radio channels. If you select “Text Only”,

with the “ ” or “ ” buttons, you navigate through only

text channels.

DISABLED : All menus are unlocked.

ALL MENUS : All Menus are accessible only with

the correct lock key. So the user cannot add, delete,

rename, channels, cannot set timers.

Scan Encrypted

Scan Encrypted Channel feature will always be ON

after performing ﬁrst time installation. When this

setting is on, search process will locate the encrypted

channels as well. If it is set as OFF manually, encrypted

INSTALLATION MENU: Installation menu is locked.

So the user can’t add channels. Changes will be

updated after exiting ‘Conﬁguration Menu’.

English - 14 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 14

18.02.2010 15:44:31

Download from Www.Somanuals.com. All Manuals Search And Download.

Set PIN

Preferred Language (Optional)

Use “ ” or “ ” buttons to go to “Set PIN” option. By pressing the “ ” or “ ” buttons the preferred audio

Press “OK” to display the “Set PIN” window. Use description language is being changed.

numeric buttons to enter new pin number you will need

to input your new pin a second time for veriﬁcation

purposes.The factory default pin number is 0000, if

This setting can be used, only if it is available.

Relative Volume (Optional)

you change the pin number make sure you write it Using this option, the Audio Description volume level

down and keep it safe.

can be increased or decreased relatively, according

to the general volume.

Standby Search (optional) (*)

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.

Use “ ” or “ ” button to select Standby Search and

then press “ ” or “ ” button to set this setting as On or

Off. If you change Standby Search to Off, this function

will be unavailable.

Time Settings (Optional)

In the conﬁguration menu, highlight the Time Settings

item by pressing “ ” or “ ” buttons.

Press “OK” and Time Settings sub menu will be

To use Standby search please make sure that

you select Standby Search as On.

Language

displayed on the screen. Current Time,Time Zone

Setting and Time Zone will be available.

Use “ ” or “ ” buttons to highlight the Time Zone

Setting. Time Zone Setting is set using “ ” or “

buttons. It can be set to AUTO or MANUAL.

In this menu the user can adjust the preferred

language. Language is changed by pressing “OK”

button.

”

WhenAUTO is selected, Current Time and Time Zone

options will not be available to be set. If MANUAL

option is selected as the Time Zone Setting, Time

Zone can be altered:

• By pressing “ ” or “ ” buttons select Time Zone.

Use “ ” or “ ” buttons to change the Time Zone

between GMT-12 or GMT+12. Current Time on the

top of the menu list will then change according to the

selected Time Zone.

Audio Description (Optional)

Audio description refers to an additional narration

track for blind and visually impaired viewers of

visual media, including television and movies. The

description narrator talks through the presentation,

describing what is happening on the screen during the

natural pauses in the audio (and sometimes during

dialogue, if deemed necessary). You can use this

feature, only if the broadcaster supports that additional

narration track. Use “ ” or “ ” buttons to select an

item. Then use “ ” or “ ” buttons to set.

Menu: shows the language of the system

Preferred

These settings will be used if available. Otherwise the

current settings will be used.

• Audio: by pressing “ ” or “ ” keys change the

audio language.

• Subtitle: alter the subtitle language with “ ” or “

” keys. The chosen language will be seen in

subtitles.

Movie Subtitle (optional)

Audio Description (Optional)

• In order to display subtitles properly, use this setting

to select a movie subtitle language.

This function enables or disables the audio description

feature by pressing the “ ” or “ ” buttons.

English - 15 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 15

18.02.2010 15:44:31

Download from Www.Somanuals.com. All Manuals Search And Download.

• By pressing “ ” or “ ” button, select the desired

language option.

• Guide: By pressing “ ” or “ ” buttons change the

guide language.

Current

• Audio: if audio language is supported change the

audio language by pressing “ ” or “ ” buttons

Automatic Channel Scan

• Subtitle: if subtitle is backed up, alter the subtitle

language with “ ” or “ ” buttons. The chosen

language will be seen in subtitles.

Note: If the Country option is set to Denmark, Sweden,

Norway or Finland, the Language Settings menu will function

as described below:

Automatic channel scan is started by pressing

“OK” button while Automatic channel scan item is

highlighted.

The following message appears on the screen:

Language Settings

Highlight Yes or No by using “ ” or “ ” buttons and

press “OK” button to conﬁrm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a

message asking whether to search for analogue

channels appears on the screen:

In the conﬁguration menu, highlight the Language

Settings item by pressing “ ” or “ ” buttons. Press

“OK” and Language Settings submenu will be

displayed on the screen:

Use “ ” or “ ” buttons to highlight the menu item

that will be adjusted and then press “ ” or “ ” button

to set.

Press the “OK” button to search for analogue

channels. The following menu appears on the screen

for analogue channel search:

Notes:

• System Language determines the on-screen menu

language.

•Audio Language is used for selecting the soundtrack

of a channels.

• Primary settings are the ﬁrst priority when multiple

choices are available on a broadcast. Secondary

settings are the alternatives when the ﬁrst options

are not available.

Installation

The Installation menu is mainly intended to help you

for creating a Channel Table in the most efﬁcient way.

Select Installation from the Conﬁguration menu by

pressing “ ” or “ ” buttons.

This menu includes the following items:

(*) For Denmark, Sweden, Norway or Finland.

Select your Country, Language and Text language

by using “ ” or “ ” and “ ” or “ ” buttons. Press

“OK” or RED button to continue. To cancel, press

BLUE button. The following menu will be displayed

during the automatic tuning:

English - 16 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 16

18.02.2010 15:44:32

Download from Www.Somanuals.com. All Manuals Search And Download.

buttons, select the desired language option, and press

OK button to activate.

After then, “First time installation” OSD will appear

on the screen. By pressing “ ” or “ ” buttons, select

the Country you want to set and press “OK” button

(* only for EU countries).

AfterAPS is ﬁnalized, the programme table will appear

on the screen. In the programme table you will see

the programme numbers and names assigned to the

programmes.

Manual Channel Scan

In manual channel scan, the number of the multiplex is

entered manually and only that multiplex is searched

for the channels. For each valid channel number, signal

level and signal quality are shown on the screen.

Press the “OK” button to start installation.After search

is completed for digital channels, a message asking

whether to search for analogue channels appears

on the screen.This process is same as described in

Automatic Search section..

In both manual and auto search any existing channel

in the database is not re-stored to avoid redundant

duplicates of that channel.

Analogue TV Menu System

Clear Service List (*)

Picture Menu

(*) This setting is visible only when the Country option

is set to Denmark, Sweden, Norway or Finland.

Use this setting to clear channels stored. Press “ ” or “

”

button to select Clear Service List and then press OK. The

following OSD message will be displayed on the screen:

Press OK to cancel. Select Yes by pressing “ ” or “

button and press OK to delete all of the channels.

”

First Time Installation

The user can use this item to load default settings,

which were loaded to the receiver at the factory.

To install factory settings, highlight “First Time

Installation” menu item and press “OK” button,

then you will be asked whether or not to delete the

settings. Selecting “Yes” by pressing “OK” button

while the “Yes” is highlighted will delete the existing

channel table.

Mode

For your viewing requirements, you can set the related

mode option.

Press “ ” or “ ” button to select Mode. Press “

” or “ ” button to choose from one of these options:

Cinema, Dynamic and Natural.

Then you will be asked to conﬁrm for deleting all

channels and settings:

Brightness/Contrast/Colour/Sharpness/

Hue

Press “ ” or “ ” button to select the desired option.

Press “ ” or “ ” button to set the level.

Note: Hue option can only be visible when the TV receives

an NTSC signal.

By selecting Yes and pressing the “OK” button, the

existing channel table will be deleted. After factory

settings are loaded, “First Time Installation” menu

will be displayed.

Colour Temp

Press “ ” or “ ” button to select Colour Temp. Press

“

” or “ ” to choose from one of these options: Cool,

Normal and Warm.

The menu which is displayed for language selection

Note:

appears on the screen at ﬁrst. By using “ ” or “

”

• Setting Cool option gives white colours a slight blue

stress.

English - 17 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 17

18.02.2010 15:44:33

Download from Www.Somanuals.com. All Manuals Search And Download.

• Setting Warm option gives white colours a slight red

stress.

Volume

Press “ ” or “ ” button to select Volume. Press “

or “ ” button to change the level of the Volume.

”

• For normal colours, select Normal option.

Noise Reduction

Equalizer

If the broadcast signal is weak and the picture is

noisy, use Noise Reduction setting to reduce the

noise amount.

Press “ ” or “ ” button to select Equalizer. Press “

” button to view equalizer menu.

Press “ ” or “ ” button to select Noise Reduction.

Press “ ” or “ ” to choose from one of these options:

Low, Medium, High or Off.

Game Mode (optional)

Select Game Mode by pressing “ ” or “ ” button.

Use “ ” or “ ” button to set Game Mode as On or

Off. When Game Mode is set to On, speciﬁc game

mode settings, which are optimized for better video

quality, will be loaded.

Also; Picture Mode, Contrast, Brightness, Sharpness,

Colour and Colour Temp settings will be invisible and

disabled while Game Mode is on.

Note:

Picture mode selection button on the remote control will have

no function while Game Mode is on.

Press “ ” or “ ” button to change the preset. In

equalizer menu, the preset can be changed to Music,

Movie, Speech, Flat, Classic and User.

Picture Zoom

Select Picture Zoom by pressing “ ” or “ ” button.

Select the desired frequency by pressing “ ” or “

”

button and increase or decrease the frequency gain

by pressing “ ” or “ ” button.

Use “ ” or “ ” buttons, to change picture zoom to

Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Subtitle

or Zoom.

Press the “M” button to return to the previous menu.

Note: Equalizer menu settings can be changed only when

the Equalizer Mode is in User.

Store

Press “ ” or “ ” button to select Store. Press “

or OK button to store the settings. “Stored...” will be

”

Balance

displayed on the screen.

This setting is used for emphasizing left or right

speaker balance.

Reset

Press “ ” or “ ” button to select Balance. Press “

” or “ ” button to change the level of the balance.

Balance level can be adjusted between -32 and +

32.

Press “ ” or “ ” button to select Reset. Press

“

” or “ ” or OK button to reset the picture modes to

factory default settings.

Sound Menu

Headphone

Press “ ” or “ ” button to select Headphone. Press

“

” button to view the headphone menu.

Headphone sub-menu options are described below:

Volume

Press “ ” or “ ” button to select Volume. Press “

” button to increase headphone volume level. Press

“

” button to decrease headphone volume level.

Headphone volume level can be adjusted between

0 and 63.

Sound Mode

Press “ ” or “ ” button to select Sound Mode. Using

“

” or “ ” button, you can select Mono, Stereo, Dual I

or Dual II mode, only if the selected channel supports

that mode.

English - 18 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 18

18.02.2010 15:44:33

Download from Www.Somanuals.com. All Manuals Search And Download.

can set Default Zoom to Panoramic, 16:9, 4:3 or

14:9 by pressing “ ” or “ ” button.

AVL

Automatic Volume Limiting (AVL) function adjusts the

sound to obtain ﬁxed output level between programmes

(For instance, volume level of advertisements tend to

be louder than programmes).

Blue Background

If the signal is weak or absent, the TV will automatically

change to a blue screen. To enable this, set Blue

Background to On.

Press “ ” or “ ” button to select AVL. Press “ ” or

“

” button to set the AVL as On or Off.

By pressing “ ” or “ ” button, select Blue

Background. Press “ ” or “ ” button to set Blue

Background as On or Off.

Store

Press “ ” or “ ” button to select Store. Press “

”

or OK button to store the settings. “Stored...” will be

displayed on the screen.

Menu Background

Press “ ” or “ ” button to select Menu Background.

You can set menu background level by pressing “

” or “ ” button.

Feature Menu

Backlight

This setting controls the backlight level. Select

Backlight by pressing “ ” or “ ” button. Press“

” or “ ” button to set Backlight to Auto, Medium,

Maximum or Minimum.

Menu Timeout

To set a speciﬁc display timeout for menu screens,

set a value for this option.

Press “ ” or “ ” button to select Menu Timeout. Use

“

” or “ ” button to change menu timeout to 15 sec,

30 sec or 60 sec.

Teletext Language

Sleep Timer

Press “ ” or “ ” button to select Teletext Language.

Use “ ” or “ ” button to change Teletext Language to

West, East, Turk/Gre, Cyrillic, Arabic or Persian.

Press “ ” or “ ” button to select Sleep Timer. Use

“

” or “ ” button to set the Sleep Timer.

The timer can be programmed between Off and 120

minutes in steps of 10 minutes.

HDMI PC Full Mode (optional)

If you want to view PC screen in HDMI mode by using

external connection, HDMI PC FULL MODE option

should be On to adjust the screen ratio correctly. This

item might be inactive in some resolutions.

If Sleep Timer is activated, at the end of the selected

time, the TV goes automatically to standby mode.

Child Lock

Note: If you connect an HDMI device and switch the

TV to HDMI mode, this feature will be visible (except for

1080i/1080P resolution).

Press “ ” or “ ” button to select Child Lock.

Use “ ” or “ ” button to set the Child Lock On or Off.

When On is selected, the TV can only be controlled

by the remote control handset. In this case the control

panel buttons will not work.

Full Mode (optional)

If you connect a device via HDMI or YPbPr connectors

and set 1080i/1080P resolutions, Full Mode item will

be visible.You can set Full Mode as 1:1 or Normal

by using “ ”or “ ”.If you select 1:1, screen ratio will

be adjusted correctly. If you set Normal, screen ratio

may expand.

Hence, if one of those buttons is pressed, Child Lock

On will be displayed on the screen when the menu

screen is not visible.

Language

Press “ ” or “ ” button to select Language. Use “

” or “ ” button to select the Language.

Ext Out

Press “ ” or “ ” button to select Ext Out. Use “ ” or

Default Zoom

“

” button to set the Ext Out as On or Off.

Note:

While zoom mode is set as AUTO, the TV will set

the zoom mode in accordance with the signal of

the broadcast. If there is no WSS or aspect ratio

information, the TV will then use this setting to adopt.

Press “ ” or “ ” button to select Default Zoom. You

For copying from a DVD or VCR device, you should choose

desired source from source menu and turn “On” to EXT Out

from feature menu.

English - 19 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 19

18.02.2010 15:44:34

Download from Www.Somanuals.com. All Manuals Search And Download.

Ext Out should be On in order to use Timers function in the

DTV mode.

Install Menu in AV Modes

The following screen appears in the install menu when

the TV is in AV modes. Note that limited options will

be available. Switch to TV mode for viewing complete

version of the Install menu.

Install Menu

Programme

Colour System

Press “ ” or “ ” button to select Programme. Use “

” or “ ” button to select the programme number. You

can also enter a number using the numeric buttons on

the remote control. There are 200 programme storage

between 0 and 199.

Press “ ” or “ ” button to select Colour System. Use

“

” or “ ” button to change the colour system to PAL,

SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.

Store

Band

Press “ ” or “ ” button to select Store Programme.

Press “ ” or “OK” button to store the settings.

“Stored...” will be displayed on the screen.

Band can be selected either C or S. Press “ ” or “

” button to set Band.

Channel

Programme Table

Channel can be changed by “ ” or “ ” button or

numeric buttons.

Select Programme Table by pressing “ ” or “

button. Press “ ” to display Programme Table:

”

Colour System

Press “ ” or “ ” button to select Colour System. Use

“

” or “ ” button to change the colour system to PAL,

PAL 60, SECAM or AUTO.

Sound System

Press “ ” or “ ” button to select Sound System.

Press “ ” or “ ” button to change the sound system

to BG,DK, I, L or L’.

Fine Tune

Press “ ” or “ ” button to select Fine Tune. Press “

” or “ ” button to adjust the tuning.

Press “ ” or “ ” button to select Search. Use “

”

By moving the cursor in four directions you can reach

20 programmes in the same page. You can scroll the

pages up or down by pressing the navigation buttons

to see all the programmes in TV mode (except for the

AV modes). By cursor action, programme selection is

done automatically.

or “ ” button to start programme searching. You can

also enter the desired frequency using the numeric

buttons while Search item is highlighted.

Store

Press “ ” or “ ” button to select Store. Press “

or OK button to store the settings. “Stored...” will be

”

Name

displayed on the screen.

To change the name of a programme, select the

programme and press the RED button.

English - 20 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 20

18.02.2010 15:44:35

Download from Www.Somanuals.com. All Manuals Search And Download.

The ﬁrst letter of the selected name will be highlighted.

Press “ ” or “ ” button to change that letter and “

or “ ” button to select the other letters. By pressing

Source Menu

”

Press “ ” or “ ” button and select the sixth icon.

Then press “ ” or “OK” button. Source menu appears

on the screen:

the RED button, you can store the name.

Move

Select the programme which you want to move by

navigation buttons. Press the GREEN button. By

navigation buttons move the selected programme to

the decided programme space and press the GREEN

button again.

Delete

To delete a programme, press the YELLOW button.

Pressing the YELLOW button again erases the

selected programme from the programme list, and

the following programmes shift one line up.

APS (Auto Programming System)

When you press the BLUE button for starting

automatic tuning, Auto Programming System menu

will appear on the screen:

In source menu, highlight a source by pressing “

”

or “ ” button and switch to that mode by pressing “

” button. Source options are; TV, DTV, EXT-1, FAV,

HDMI-1, HDMI-2, YPbPr and PC-VGA.

Note: Once you have connected optional equipment systems

to your TV, you should select the required input to view

pictures from that source.

Press “ ” or “ ” button to select your country. If you

want to exit from A.P.S. function, press the BLUE button.

When you press OK or RED button for starting

automatic tuning, all stored programmes will be erased

and the TV will search for available channels. During

the search, the following OSD will be displayed:

Whenever you press the BLUE button, APS function

stops and Programme Table appears on the screen.

If you wait until the end of APS, Programme Table

will be displayed with the programmes found and

located.

English - 21 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 21

18.02.2010 15:44:36

Download from Www.Somanuals.com. All Manuals Search And Download.

Select Phase item by using “ ” or “ ” buttons. Use

” or “ ” button to adjust the value.

PC Mode Menu System

“

See “Connecting the LCD TV to a PC” section for

Dot Clock

connecting a PC to the TV set.

Dot Clock adjustments correct the interference

that appear as vertical banding in dot intensive

presentations like spreadsheets or paragraphs or

text in smaller fonts.

For switching to PC source, press “

remote control and select PC input. You can also use

“Source” menu to switch to PC mode.

” button on your

Note that PC mode menu settings are available only while

the TV is in PC source.

Select Dot Clock item by using “ ” or “ ” buttons.

Use “ ” or “ ” button to adjust the value.

PC Position Menu

Select the first icon by pressing “ ” or

PC Picture Menu

For adjusting PC picture items, do the following:

“

” button. PC Position menu appears on the screen:

Press “ ” or “ ” button to select the second icon. PC

Picture menu appears on the screen.

Brightness, Contrast, Colour and Colour

Temperature settings in this menu are identical to

settings deﬁned in TV picture menu under “Analogue

TV Menu System”.

Note: If you set Colour Temp as User, you can deﬁne R, G,

B settings manually.

Sound,Feature and Source settings are identical to the

settings explained in Analogue Tv menu system.

Displaying TV Information

Programme Number, Programme Name, Sound

Indicator and Zoom Mode information is displayed

on the screen when a new programme is entered or

“INFO” button is pressed.

Autoposition

If you shift the picture horizontally or vertically to an

unwanted position, use this item to put the picture

into correct place automatically. This setting therefore

automatically optimizes the display.

Mute Function

Press “ ” button to disable sound. Mute indicator will

be displayed in the upper side of the screen.

To cancel mute, there are two alternatives; the ﬁrst

one is pressing the “ ” button and the second one

is increasing the volume level.

Select Autoposition item by using “ ” or “ ” buttons.

Press “OK” or “ ”, “ ” button.

Warning: Please ensure auto adjustment is performed

with a full screen image to ensure best results.

Picture Mode Selection

By pressing PP button, you can change Picture

Mode settings in accordance with your viewing

requirements.Available options are Dynamic, Natural

and Cinema.

H (Horizontal) Position

This item shifts the image horizontally to right hand

side or left hand side of the screen.

Select H Position item by using “ ” or “ ” button.

Use “ ” or “ ” button to adjust the value.

Note: This feature cannot be set while in PC mode.

Freezing Picture

V (Vertical) Position

You can freeze the picture on the screen by pressing

the “OK” button on the remote control. Press the

“OK” button to freeze picture. Press again to quit

freeze mode.

This item shifts the image vertically towards the top

or bottom of the screen.

Select V Position item by using “ ” or “ ” button.

Use “ ” or “ ” button to adjust the value.

Note: This feature will not be available while in PC

mode or watched movie from DVI source .

Phase

Depending on the resolution and scan frequency that

you input to the TV set, you may see a hazy or noisy

picture on the screen. In such a case you can use this

item to get a clear picture by trial and error method.

English - 22 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 22

18.02.2010 15:44:36

Download from Www.Somanuals.com. All Manuals Search And Download.

Zoom Modes

You can change the aspect ratio (image size) of the TV

for viewing the picture in different zoom modes.

Cinema

Press “

mode.

” button to directly change the zoom

This zooms up the wide picture (16:9 aspect ratio) to

the full screen.

Available zoom modes are listed below.

Note:

In YPbPr and HDMI modes, while in 720p-1080i resolutions,

only 16:9 mode is available.

Zoom mode cannot be changed while in PC mode.

Subtitle

This zooms up the wide picture (16:9 aspect ratio)

with subtitles to the full screen.

Auto

When a WSS (Wide Screen Signalling) signal, which

shows the aspect ratio of the picture, is included in

the broadcast signal or the signal from an external

device, the TV automatically changes the ZOOM

mode according to the WSS signal.

Zoom

• When the AUTO mode does not function correctly

due to poor WSS signal quality or when you want to

change the ZOOM mode, change to another ZOOM

mode manually.

This option zooms to the picture.Note: You can shift

to screen up or down by pressing “ ” / “ ” buttons

while picture zoom is selected as panaromic, 14:9,

Cinema or Subtitle.

16:9

This uniformly stretches the left and right sides of a

normal picture (4:3 aspect ratio) to ﬁll the wide TV

screen

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect ratio),

use the 16:9 mode to restore the picture to its

original shape.

4:3

Use to view a normal picture (4:3 aspect ratio) as this

is its original size

Panoramic

This stretches the left and right sides of a normal

picture (4:3 aspect ratio) to ﬁll the screen, without

making the picture appear unnatural.The top and

bottom of the picture are slightly cut off.

14:9

This zooms up the wide picture (14:9 aspect ratio) to

the upper and lower limits of the screen.

English - 23 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 23

18.02.2010 15:44:37

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext

Tips

Teletext system transmits information such as news,

sports and weather on your TV. Note that is the signal

degrades, for example in poor/adverse weather

conditions, some text errors may occur or the teletext

mode may be aborted.

Image Persistence

Please note that ghosting may occur while displaying

a persistent image. LCD TVs’ image persistence may

disappear after a short time. Try turning off the TV for

a while. To avoid this, do not leave the screen in still

picture for extended periods.

Teletext function buttons are listed below:

“

” Teletext On-Off / PAT Mode

No Power

Activates teletext mode when pressed once. Pressing

this button again will split the screen into two windows,

one displaying the teletext and the other displaying

the current channel. Pressing again will quit the

teletext mode.

If your TV system has no power, please check the

main power cable and connection to the mains

socket outlet.

Poor Picture

Have you selected the correct TV system? Is your TV

set or house aerial located too close to a non-earthed

audio equipment or neon lights, etc.?

“

” Index

Selects the teletext index page.

“

” Mix

Mountains or high buildings can cause double pictures

or ghost images. Sometimes you can improve the

picture quality by changing the direction of the aerial.

Is the picture or teletext unrecognisable? Check if you

have entered the correct frequency. Please retune the

channels. The picture quality may degrade when two

peripherals are connected to the TV at the same time.

In such a case, disconnect one of the peripherals.

Places the teletext screen over the programme.

“

” Expand

Press once to enlarge top half of the page, press again

to enlarge the bottom half of the page. Press again to

revert back to normal size.

“

” Reveal

Shows hidden information (e.g. solutions of games).

No Picture

“

” Hold

Is the aerial connected properly? Are the plugs

connected tightly to the aerial socket? Is the aerial

cable damaged? Are suitable plugs used to connect

the aerial? If you are in doubt, consult your dealer.

Holds a text page when convenient. Press again to

resume.

“

” Subcode Pages / Time

No Picture means that your TV is not receiving a

transmission. Have you selected the correct button on

the remote control? Try once more. Also make sure

the correct input source has been selected.

Selects subcode pages if available when the teletext

is activated. When the teletext is not activated,

displays time info if the programme has teletext

transmission.

Sound

P+ / P- and numbers (0-9)

You can not hear any sound. Did you perhaps interrupt

the sound, pressing the “ ” button?

Press to select a page.

Note: Most TV stations use code 100 for their index pages.

Sound is coming from only one of the speakers. Is the

balance set to one extreme? See Sound Menu.

Coloured Buttons

(RED/GREEN/YELLOW/BLUE)

Remote Control

Your TV supports both FASTEXT and TOP text

systems. When these systems are available, the

pages are divided into groups or topics.

Your TV no longer responds to the remote control.

Perhaps the batteries are exhausted. If so you can still

use the local buttons at the bottom of the TV.

When FASTEXT system is available, sections in a

teletext page will become colour-coded and can be

selected by pressing the coloured buttons. Press

a coloured button that corresponds to with your

needs.

Input Sources

If you cannot select an input source, it is possible that

no device is connected.

Check theAV cables and connections if you have tried

to connect a device.

The coloured writings will appear, showing you which

coloured buttons to use when TOP text transmission

is present. Pressing P - or P+ commands will request

the next or previous page respectively.

English - 24 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 24

18.02.2010 15:44:37

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix A: PC Input Typical Display Modes

The display has a maximum resolution of 1600 X 1200. The following table is an illustration of some of the

typical video display modes.

Your TV may not support different resolutions. Supported resolution modes are listed below.

If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

Resolution

Frequency

Index

Standard

Hor

Ver

Ver (Hz)

(KHz)

31.5

37.9

37.5

35.2

37.9

43.8

48.1

46.9

49.7

48.4

56.5

57.7

60.0

64.2

67.5

68.9

47.7

60.0

64.0

80.0

75.0

640

480

600

624

768

864

870

768

960

1024

1200

VESA

640

800

VESA

MAC

800

832

1024

1152

1280

1360

1280

1600

VESA

MAC

VESA

English - 25 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 25

18.02.2010 15:44:38

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix B: AV and HDMI Signal Compatibility (Input Signal

Types)

Source

Supported Signals

PAL 50/60

NTSC 60

RGB 50

RGB 60

PAL 50/60

NTSC 60

480I

Available

EXT-1

(SCART)

FAV

60Hz

50Hz

60Hz

50Hz

60Hz

50Hz

60Hz

50Hz

60Hz

50Hz

60Hz

24Hz

25Hz

480P

576I

576P

720P

YPbPr

720P

1080I

1080P

480I

480P

576I

576P

720P

HDMI1

HDMI2

1080I

1080P

30HZ

50HZ

60HZ

(X: Not Available, O: Available)

Note: In some cases a signal on the LCD TV may not be displayed properly. The problem may be an

inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do experience such

a problem please contact your dealer and also the manufacturer of the source equipment.

English - 26 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 26

18.02.2010 15:44:38

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

TV BROADCASTING

PAL/SECAM B/G D/K K’ I/I’ L/L’

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Proﬁle 1

Object carousel support compliant with ISO/IEC 135818-6 and UK DTT proﬁle

for UK

Frequency range: 474-850 MHz for UK models

170-862 MHz for EU models

Digital

Reception

Transmission standard: DVB-T. MPEG-2

Demodulation: COFDM with 2K/8K FFT mode

FEC: all DVB modes

Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148kHz.

NUMBER OF PRESET CHANNELS

CHANNEL INDICATOR

200

On Screen Display

75 Ohm (unbalanced)

220-240V AC, 50 Hz.

German+Nicam Stereo

2 x 6

RF AERIAL INPUT

OPERATING VOLTAGE

AUDIO

AUDIO OUTPUT POWER (W_RMS.) (10% THD)

POWER CONSUMPTION (W)

150 W (max)

< 1 W (Standby)

32” wide display

PANEL

DIMENSIONS (mm)

DxLxH (With foot):

Weight (Kg):

212 x 776 x 567

12.30

DxLxH (Without foot):

Weight (Kg):

94 x 776 x 524

11.60

Information for Users on Disposal of old Equipment and

Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not

be disposed of as general household waste. If you want to dispose

of the product or battery, please consider the collection systems or

facilities for appropriate recycling.

Battery

Notice: The sign Pb below the symbol for batteries indicates that this battery

contains lead.

Products

English - 27 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 27

18.02.2010 15:44:38

Download from Www.Somanuals.com. All Manuals Search And Download.

Important Instruction

For your own safety read following instruction carefully before attempting to connect this unit to the mains

supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

GREEN

FUSE

YELLOW

(Earth)

(if there is earth cable)

BROWN

(Live)

BLUE

(Neutral)

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal which is marked with

the letter E, or by the earth symbol, or coloured green or green and yellow.

The wire which is coloured blue or black must be connected to the terminal which is marked with the

letter N or coloured Black.

The wire which is coloured brown or red must be connected to the terminal which is marked with the

letter L or coloured Red.

For continued protection against risk of ﬁre, replace only with same type and rating of fuse (ASTA

approved 5A 250VAC fuse).

Note: Earth connection is used only for classI applications.

This symbol means this appliance is a class II appliance and therefore, an earth connection is

not required.

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING

COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT

ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

English - 28 -

00_MB45M_[GB]_1205UK_IDTV_NICKEL13_32855W_10066808_50164923.indd 28

18.02.2010 15:44:38

Download from Www.Somanuals.com. All Manuals Search And Download.

Taylor Scale 3852 User Manual
TDK Network Card DEA Series DEA200710LT 1238A1 User Manual
Toshiba Security Camera IK 6420A User Manual
United States Stove Indoor Fireplace 2020L User Manual
Vermont Casting Indoor Fireplace Designer Select Series User Manual
Vicks Thermometer V932 User Manual
Vinotemp Refrigerator VINO1500HZD User Manual
Vivotek Webcam 3123 User Manual
Walker Indoor Furnishings W44CCRBL User Manual
Weed Eater Tiller 143647 User Manual