DVD/VCR DECK
Operating Instructions
Model No. PV-D4754S
Connections and Initial Setup Procedures are on pages 12 to 17.
MULTI FORMAT PLAYBACK
Ability to play back may depend on recording conditions.
*
As an ENERGY STAR® Partner, Matsushita Electric Corporation
of America has determined that this product or product model
meets the ENERGY STAR® guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
Spanish Quick Use Guide is included.
(Guía para rápida consulta en español está incluida.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions/Mesures de sécurité
To prevent fire or shock hazard, do not expose this equipment to rain
or moisture.
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
AVERTISSEMENT:
Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
exposer cet appareil à la pluie ou à une humidité excessive.
ATTENTION:
Pour éviter les chocs électriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
This symbol warns the user that uninsulated voltage within the unit may
CAUTION
DO NOT OPEN
have sufficient magnitude to cause electric shock. Therefore, it is
RISK OF ELECTRIC SHOCK
dangerous to make any kind of contact with any inside part of this unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
CAUTION:
CAUTION:
LASER RADIATION
WHEN OPEN DO NOT
STARE INTO BEAM.
UNIT IS A CLASS I LASER PRODUCT.
HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE UNIT CORRECTLY AS INSTRUCTED.
WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE
YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER
OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
ATTENTION:
RAYONNEMENT
LASER EN CAS
D’OUVERTURE.
NE PAS REGARDER
DANS LE FAISCEAU.
DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
(Inside of product)
FCC NOTE:
This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when operated in a
residential environment. If this equipment does cause interference to radio or television reception,
which can be determined by turning the equipment off and on, use the equipment in another
location and/or utilize an electrical outlet different from that used by the receiver.
If necessary, consult the dealer or an experienced radio/TV technician for help. The user may find
the booklet, “Something About Interference” available from FCC local regional offices helpful.
FCC Caution:
To assure continued compliance, (example- use only shielded interface cables when connecting
to other devices.) Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Region Management Information:
This DECK is designed and manufactured to respond to the
Region Management Information that is recorded on a DVD
disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DECK, this
DECK cannot play this disc.
Example:
1
2
1
ALL
4
●The Region number for this DECK is “1”.
●The Player will play DVD-Video marked with labels
containing “1” or “ALL”.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Congratulations
Head Cleaning
Playing older or damaged tapes may eventually
cause video heads to become clogged.
on your purchase of one of the most
sophisticated and reliable products on the
market today. Used properly, it will bring you
years of enjoyment. Please fill in the information
below. The serial number is on the tag located
on the back of your DECK.
Video Head Clog Sensor
V
I
D
EO HEADS
EED CLE NG
NSERT HEAD
NG CASSETT
OR REFER MANUAL
MAY
N
A
N
I
During playback, this screen
appears if clogging is detected.
To remove screen, press PLAY
on the remote or DECK.
PLEASE
CLE
I
AN
I
E
T
O
• Date of Purchase
• Dealer Purchased From
END
:
PLAY
• Dealer Address
• Dealer Phone No.
• Model No.
• Serial No.
• Use “dry” type head cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
PV-D4754S
• Follow cleaning tape instructions carefully.
Excessive use of tape can shorten head life.
• If head clog symptoms persist, contact your
nearest servicenter by visiting our Web Site
(see p. 61).
Accessories
Remote Control
EUR7724KB0
Batteries 2 “AA”
Cleaning DECK
Use a soft cloth or dusting attachment of a vacuum
cleaner to remove dust from the ventilation holes on
the back sides and bottom of the cabinet.
RF Coaxial Cable
LSJA0418
Plastic surfaces are easily scratched and can be
marred by alcohol and various solvents.
Avoid excessive use of oil-based furniture polishes
To order accessories, since the materials used in the cabinet will
accumulate more dust. We recommend using a
non-abrasive, antistatic cleaner and polisher.
call toll free
1-800-332-5368.
Loading the Batteries
Features for a Quality Picture (VCR)
Digital Auto Picture
Automatically controls the video output signal for
less noise depending on the tape condition.
1) Open cover.
2) Insert batteries as
marked.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Tracking Control
(to reduce picture noise)
3) Close cover.
Use during Playback and Slow Motion mode to
reduce picture noise.
Battery replacement caution
Press CH (TRACKING)
/
on the remote control
• Do not mix old and new batteries.
or on DECK until the picture clears up.
To return to Auto Tracking, press POWER off, then
on again a few seconds later.
• Do not mix alkaline with manganese batteries.
Record/ Playback Time
Only use tapes with the
mark in this DECK.
Type of Video Cassette
Tape Speed
Setting
T120
T160
T180
2 Hours
40 Minutes
SP
2 Hours
3 Hours
(Standard Play)
V-Lock Control (to reduce picture jitter)
SLP
6 Hours 8 Hours
9 Hours
In Still mode, CH (TRACKING)
/
operate as a
(Super Long Play)
V-Lock control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Initial Setup (Connection)
DVD / VCR
Important Safeguards and Precautions ......................... 2, 3
Before Using ......................................................................... 4
DECK & Cassette Information ........................................ 6 , 7
Location of Controls .................................................... 8 ~ 10
Displays (On Screen Displays and Multi Function Display) ................. 11
Connections ............................................................... 12 ~ 15
Initial Setup for Basic Connections (Ready to Play) ....... 16, 17
Basic Operation
VCR
Reset Language, Channels, Clock, VCR’s Output Channel .. 18, 19
Playback/ Record on a Tape........................................ 20, 21
DVD
Basic DVD Operation ................................................... 22, 23
VCR Operation
Timer Recording........................................................... 24, 25
MTS Broadcast/ VHS Hi-Fi Stereo System ................. 26, 27
Multi-Brand Control Feature ........................................ 28, 29
Tape Operation (Search System) ...................................... 30, 31
Special VCR Features ................................................ 32 ~ 34
Copying Your Tapes (Dubbing) ...................................................... 35
DVD Operation
Disc Operation ............................................................ 36 ~ 41
DVD-RAM Operation (DVD-RAM only).............................. 42, 43
DVD Operation using On-Screen Displays .............. 44 ~ 48
MP3/JPEG Playback Operation ................................. 49 ~ 51
Settings for DVD Operation ....................................... 52 ~ 55
A/V OPTIMIZER................................................................... 55
Language Code List........................................................... 56
For Your Information
Warning and Instruction Displays..................................... 57
Before Requesting Service.......................................... 58, 59
Limited Warranty .......................................................... 60, 61
Customer Services Directory ............................................ 61
Spanish (Español) Quick Use Guide......................... 62 ~ 69
Index .............................................................................. 70, 71
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK & Cassette Information
DVD-RAM discs
Prevent Accidental Tape Erasure
DVD-RAM discs must meet the following conditions
Break off the tab to
prevent recording.
for this unit to be able to play them.
• Non-cartridge discs
Record Tab
Type
• Discs that can be removed from
their cartridges (TYPE 2 and 4)
Screw driver
• 12 cm (5”) 9.4 GB (double-sided)
and 4.7 GB (single-sided)
• 8 cm (3”) 2.8 GB (double-sided)
Capacity
To record again
• Remove TYPE 2 and 4 discs from their cartridges
before use, then return them when you are finished.
Read the instructions for the disc carefully.
Cover the hole
with cellophane tape.
Disc formats supported by this DECK
DECK can play back discs bearing any of the
following marks:
Logo
Disc type
• Some parts of the disc, for example where one program
ends and another begins, may not play smoothly.
DVD-RAM (Version 1.1 of the
Video Recording Format a
unified video recording
standard)
Disc Handling
Handling precautions
• Sticking a label on the disc may impair DVD-R playback.
• Do not attach sticker to discs. (Do not use discs with
exposed adhesive from tape or left over peeled-off
stickers.)
DVD (DVD-Video)
DVD-R (DVD-Video formatted
discs [finalized])
• Only hold disc by edges as shown below. Fingerprints,
dirt and scratches can cause skipping and distortion.
• Do not write on label side of disc.
DVD-Audio
CD (CD-DA)
• Never use record cleaning
sprays, benzine, thinner,
Disc tray
static electricity prevention
Disc
liquids, or any other solvent.
CD-R/CD-RW
• CD-DA format
• WMA/MP3/JPEG file and
finalized.*
• Do not try to close disc tray when disc is not
properly placed.
[Discs Played 8cm (3") or 12cm (5")]
*A process that allows play on compatible equipment.
To clean disc surface
With a soft, damp (water only) cloth,
gently wipe from the center hole to the
outer edge as shown below. (Wiping in a
circular pattern will scratch the surface.)
• DVD-RAM, DVD-R :
Discs which cannot be played
• DVD with Region No. other than “1” or “ALL”
• PAL discs (the audio on DVD-Audio can be
played), DVD-ROM, DVD-RW, DVD+R,
DVD+RW, CD-ROM, CDV, CD-G, CVD, SVCD,
SACD, CD-TEXT, Divx Video Disc, Photo-CD
and Video CD
Clean only with the DVD-RAM disc
cleaner available. Never use cloths or
cleaners for CDs etc.
If disc is brought from a cold to a warm
environment, moisture may form on the disc
Wipe away moisture with a soft, dry, lint-free cloth
before using disc. (See above.)
Notes
• Do not use irregularly shaped discs (e.g. heart-
shaped), as these can damage the unit.
• It may not be possible to play CD-R, CD-RW,
DVD-R and DVD-RAM in all cases due to the
type of disc or condition of the recording.
Improper disc storage
Discs could be damaged if stored or left in areas:
• exposed to direct sunlight.
• that are humid or dusty.
• near heat (i.e. heater, radiator, etc.).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Source:
120 V AC, 60 Hz
Power On: Approx. 28 watts, Power Off: Approx. 0.85 watts
Power Consumption:
Video Signal:
EIA Standard NTSC color
Video Recording System: 4 rotary heads helical scanning system
Audio Track:
1 track (Normal), 2 channel (Hi-Fi Audio Sound)
Tuner
Broadcast Channels:
CABLE Channels:
VHF 2 ~ 13, UHF 14 ~ 69
Midband A through I (14 ~ 22), Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64), Lowband A-5 ~ A-1 (95 ~ 99)
Special CABLE channel 5A (01), Ultraband 65 ~ 94, 100 ~ 125
Input/Output Terminal:
Input Terminal:
Output Terminal:
Audio/Video Line Input/Output, RF Input/Output
Audio/Video Line Input (Front)
S-Video Output (DVD only), Component Video Output (DVD only)
Audio Output 2 (L), (R)
Operating Temperature:
Operating Humidity:
Weight:
5 °C ~ 40 °C (41 °F ~ 104 °F)
10 % ~ 75 %
3.85 kg (8.5 lbs).
Dimensions:
430 (W) x 95 (H) x 273 (D) mm
16-15/16” (W) x 3-3/4” (H) x 10-3/4” (D) inch
Discs Played
(1) DVD-Video Disc
DVD-Audio Disc
5” (12 cm) single-sided single-layer
5” (12 cm) single-sided double-layer
5” (12 cm) double-sided double-layer (one layer per side)
3” (8 cm) single-sided single-layer
3” (8 cm) single-sided double-layer
3” (8 cm) double-sided double-layer (one layer per side)
5” (12 cm) 9.4 GB (double-sided) and 4.7 GB (single-sided)
3” (8 cm) 2.8 GB (double-sided)
DVD-RAM Disc
(2) Compact Disc
(CD-DA)
(CD-R/CD-RW, MP3, WMA, JPEG)
5” (12 cm) disc
3” (8 cm) disc
Digital Audio Output:
Pickup:
Digital Optical Connector
Wavelength: 655 nm (DVD), 790 nm (CD)
Laser power: CLASS II
Note: • Designs and specifications are subject to change without notice.
Definition of Terms (DVD)
Angle:
Some DVD discs feature scenes simultaneously shot from different angles.
The ANGLE button can be used to view the scene from different angles.
(ANGLE Indicator lights on DECK when a scene recorded at different
angles is detected.)
Chapter Number:Titles are subdivided into numbered sections. You can quickly search for
a favorite scene using these numbers.
DVD:
A high-density optical disc on which high-quality pictures and sound have
been digitally recorded. DVD incorporates video compression technology
(MPEG II) and high-density recording technology which allow entire
movies to be recorded with incredible playback quality.
Subtitles:
Time Number:
Written dialogue which appears at the bottom of the screen.
The elapsed play time from the start of a disc or title. Use to quickly find
scenes. (May not work with some discs.)
Title Number:
For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.
Track Number: Numbers assigned to tracks on CDs to allow specific tracks to be quickly
located.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093,
licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Controls
Bold: VCR Function / Bold Italic: VCR and DVD Functions
Italic: DVD Function / Normal: Others
Remote Control
VCR/TV
EJECT
/
p. 21
OPEN
/
CLOSE
pp. 20, 22
TV mode
p. 28
POWER
CHANNEL
TRACKING V-LOCK
/
/
/
/
10
pp. 4, 21, 22
NUMBER keys
VOLUME
+
/
-
p. 28
MENU
/
PLAY LIST
ADD/DELETE
/
CLEAR
p. 38, 43
pp. 19, 39
ACTION
SELECT
pp. 18, 52
SET
DVD mode
p. 28
VCR mode
p. 28
PLAY
pp. 20, 22
STOP
pp. 20, 22
SKIP+
SKIP-
p. 23
REWIND
SLOW-
/
SEARCH
/
pp. 20, 23
Virtual Surround Sound (V.S.S.)
/
FAST FORWARD
/
ENTER
SEARCH SLOW+
/
pp. 23, 28
pp. 20, 23
ZOOM
PAUSE /STILL
p. 37
pp. 20, 23
ANGLE
TAPE POSITION
/
STATUS
p. 37
VOLUME ADJUST
p. 31, 40
SUB TITLE
p. 36
AUDIO (SAP / Hi-Fi)
pp. 27, 36
TITLE
/
DIRECT NAVIGATOR
p. 38, 42
RETURN
/
SEARCH
pp. 22, 30
INPUT
p. 35
COMMERCIAL SKIP
/
ZERO SEARCH
A/VOPTIMIZER
pp. 30, 55
DISPLAY
p. 11, 44
COUNTER RESET
RECORD
p. 30
p. 21
SPEED
/
PAGE
PROGRAM
p. 21, 41
p. 24
EJECT button: When this button is pressed in VCR mode, the tape is ejected.
This button is inoperative if pressed during recording.
If pressed in DVD mode, the disc tray opens or closes.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
If the disc cannot be removed...
Front View of DECK
Font of DEC
First, unplug DECK. Then, prepare a rigid
wire (e.g. an extended paper clip) and,
applying moderate force, insert it straight
into the hole at the base of the tray.
The tray will eject a little. Now, pull the tray
all the way out and remove the disc.
Bold:
Italic:
VCR Function
DVD Function
Bold Italic: VCR and DVD Functions
Normal:
Others
PLAY
p. 20
STOP/EJECT
p. 20
Over 2 inches
Remote
Sensor
POWER
Cassette
Compartment
Disc Tray
OPEN/CLOSE
Audio/Video
Blue Light
p. 22
Input Connector 2
(LINE 2) p. 35
p. 32
FAST FORWARD
/
SEARCH
/
REC
p. 21
Multi Function
Display
SKIP
p. 20, 23
p. 11
CHANNEL
/
REWIND
/
SEARCH
/
TRACKING/V-LOCK
pp. 4, 21
SKIP
p. 20, 23
PLAY
p. 22
STOP
p. 22
Reset All Memory Functions
Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the DECK.
Turn DECK Power on.
1
2
Press and hold both VCR PLAY
and CHANNEL
on the DECK for
more than 5 seconds.
• The power shuts off.
Perform “Initial Setup (Ready to Play)”
on page 16.
3
1
2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Controls (continued)
Bold:
VCR Function
Italic: DVD Function
Rear View of DECK
Bold Italic: VCR and DVD Functions
AC Power Plug
• While plugged into an AC outlet,
this DECK consumes 0.85 W of
electrical power in off mode.
VHF/UHF Antenna Output Terminal
p.12
VHF/UHF Antenna Input Terminal
p. 12
Component Video Output
VideoOutput
Connector
p. 12
VideoInput
Connector
p. 35
Connector (Y, PB, PR)
(DVD Only)
p. 13
•
•
•
Audio Output 1
Connector (L/R)
p. 12
Optical Digital Audio
Output Connector
(DVD Only)
p. 15
Audio Input
Connector (L/R)
p. 35
S-Video Out Connector
(DVD Only)
pp. 10, 13
Audio Output 2
Connector (L/R)
p. 13
The following table shows the status of the output jacks when in VCR or DVD mode.
Video Output
Component
S-VIDEO OUT
N/A
Audio Out 1
Audio Out 2
Video Output
VCR
YES
YES
N/A
DVD
YES
• PROG functions on the remote are not available when using Component Video Output and
S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.
Note
To enjoy PROGRESSIVE SCAN video
(1). Connect Component Video Output to the component video input terminals of a television.
(See p. 13.)
(2). When PROGRESSIVE OUT is set to “ON” in the DVD Main Menu (p. 55), a Progressive
Scan signal is output from the Component Video Output Connector.
Notes
• The screen may shift off-center when using progressive output. Please adjust the screen
position if this occurs. (Refer to your TV manual.)
• If the television is not progressive compatible, a progressive scan picture is not available.
Connect the Video Output or S-Video Output connector (see p. 12, 13) and
set PROGRESSIVE OUT to “OFF” in the DVD Main Menu. (See p. 55.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays (On Screen & Multi Function)
On Screen Displays (VCR)
Function & Channel Displays
Blank Tape/ No Video Signal
Indications
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with Weak
Signal Display Feature (p. 33) set to OFF,
the TV screen will turn solid blue.
When a function button
is pressed, e.g. PLAY,
CH 08
or you change
channels, a 5-second
display appears.
Current Time
Function Status
Channel
VCR Status & Clock Displays
To display or remove
CH 02
REW
0: 25
EREO
SAP
ONO
12:00AM
screen shown at right,
-0
:
12
:
34
SP
Counter
Rec Time Remaining
(OTR mode only,
see p. 21.)
S
T
➛ press DISPLAY.
M
Broadcast Audio
Being Received
(See pp. 26, 27.)
Tape Speed
(See p. 4.)
Multi Function Display
Tape Indicator
DISC Indicator
DVD mode Indicator
Lights up when
DECK is in DVD mode.
VCR mode Indicator
Lights up when
DECK is in VCR mode.
Lights up when a tape Lights up when a
is inserted.
disc is inserted.
CD/MP3/WMA
Indicator
CD :Lights when an
Audio CD is
inserted or
JPEG file is
played.
MP3/WMA :
VCR REC Indicator
Lights up during
recording.
Timer Indicator
Lights up when
DECK is set for
Timer Recording,
or when One
Touch Recording
(OTR) is used.
Flashes when
Timer Recording is
set, but a tape has
not been inserted
into DECK and
when a power
DVD
WMA
ANGLE
VCR
CD
MP3
TIMER REC
AM
PM
Hi - Fi
Lights when an
MP3 or WMA
file is played.
DIGITAL
ANGLE Indicator
Lights up when a
scene recorded at
different angles is
detected.
Hi-Fi Indicator
Lights up when
AM/PM
Indicator
interruption occurs
during Timer
Programming.
Hi-Fi audio is
present in Play
mode.
(See p. 37.)
(DVD only)
DTS Indicator
Lights up when a DTS
formatted DVD is played.
(DVD only)
Clock/ Status/ Channel/ Speed Display
Displays current time. Briefly displays DECK
status when you press a function button,
channel number or “L1” or “L2” when you select
channel or line input, and recording speed when
you press SPEED.
Dolby Digital
Indicator
Lights up when a “Dolby Digital”
formatted DVD is played.
(DVD only)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Basic Connections
• If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher
quality picture and sound.
• You can enjoy stereo sound even if your TV is not stereo by connecting a stereo
amplifier to DECK.
a
b
• Connect DECK and TV with an RF Coaxial Cable
(not supplied) as shown in the figure below.
(supplied) or an AV Cable
■ Cable Box DECK TV
■ DECK TV
■ DSS Receiver DECK TV
Antenna or Cable
DSS
Receiver
IN
CableBox
IN
IN
OUT
OUT
or
1 Disconnect antenna or cable from TV
and connect to DECK.
2 Connect DECK to TV with RF Coaxial Cable.
RF COAXIAL CABLE
DVD/VCR DECK
a
(supplied)
TV
IN FROM ANT.
IN1
OUT
VIDEO
AUDIO
VHF/
UHF
VHF/UHF
L
AUDIO IN VIDEO
L
IN
R
OUT TO TV
R
b
AV CABLE (not supplied)
When using “Nut type” RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.
Note to CABLE system installer
This reminder is provided to call the CABLE system installer’s attention to Article 820-40 of the
NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Connections
YouCan
YouCannot
■ With a Cable Box (DECK Cable Box TV)
• view any
(including
scrambled)
channel.
• record
scrambled
channels.
DVD/VCR DECK
ANT or CATV
TV
IN FROM ANT.
IN1
OUT
IN OUT
R
Cable Box
IN OUT
• use Remote
AUDIO
VHF/
UHF
VHF/UHF
OUT TOTV
L
Control to select
channels without
using Multi-brand
control feature.
VIDEO
■ Connect With Two Cable Boxes
YouCan
YouCannot
DVD/VCR DECK
ANT
• record and view
both scrambled
and unscrambled
channels if
additional
equipment is
added.
This connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
splitter.
• view a channel
other than the
one selected
for any type of
recording.
IN FROM ANT.
IN1
OUT
Cable Box
or
CATV
IN OUT
VHF/UHF
OUTTOTV
TV
• set a Timer
recording of a
channel unless
you select it on
the Cable Box.
IN OUT
R
2-Way Splitter
A/B Switch
AUDIO
Cable Box
L
OUT1
OUT2
VIDEO
VHF/
UHF
IN OUT
IN 1 IN 2
Connections For DVD Only (enjoying higher picture quality)
Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT
or S-VIDEO mode).
If your TV has COMPONENT VIDEO INPUT, connect to COMPONENT VIDEO OUT.
If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, connect to
S-VIDEO OUT.
1
2
When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.
3
• You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV,
Notes
and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available only
from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.
• PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT
Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.
• TV must have capability to accept and display a progressive scan signal to use
PROGRESSIVE mode. Consult your TV operating instructions.
From DECK’s
DVD/VCR DECK
A/V OUTPUT
TV
COMPONENT
VIDEOOUT
DVD OUTPUT
AUDIOOUT2
IN
IN
IN
Y
L
Y
AUDIO
VIDEO
R
PB
PR
L
P B
P R
S-VIDEO OUT
S-VIDEO
IN
R
or
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections (continued)
Audio Connections
ReadyChecklist
Turn down the volume, then turn DECK, as well as other equipment to be connected,
off before proceeding with connection.
Do not block ventilation holes of any of the equipment and arrange them so that air can
circulate freely.
Read through the instructions before connecting other equipment.
Ensure that you observe the color coding when connecting audio and video cables.
■ Connecting Amplifier (2ch stereo system)
Speaker
Speaker
Amplifier
DVD/VCR DECK
AUDIO IN
AUDIO OUT2
R
L
L
R
Enjoying digital audio output from the digital audio output connector
Notes on audio output from the optical digital audio output connector
Disc
DVD
Optical digital audio output from connector
Sound recording format
Dolby Digital bitstream (1-5.1 ch)
Dolby Digital
or PCM (48 kHz sampling/16 bit only)*1
Linear PCM
(48/96/192/44.1/88.2/
176.4 kHz 16/20/24bit)
Linear PCM (2 ch)
(48 kHz sampling/16 bit or 44.1 kHz sampling/
16 bit)*2
Bitstream or PCM (48 kHz sampling/16 bit only)*1
DTS
Dolby Digital bitstream (1 - 5.1 ch)
or PCM (48 kHz sampling/16 bit only)
Dolby Digital
DVD-RAM
CD
Linear PCM(48 kHz/16 bit) Linear PCM (2 ch)
Linear PCM
MP3
Linear PCM (44.1 kHz sampling)
MP3
WMA
Linear PCM (It depends on the MP3 file)
Linear PCM (It depends on the WMA file)
WMA
*1 The type of audio output from the connector can be selected by the Settings for DVD
Operation. (See p. 53.)
*2 When “LPCM(DVD)” is set to OFF in the DVD Main Menu, 44.1 or 48 kHz sampling/16 bit is
ouput. When set to ON, sampling of sound quality greater than 44.1 or 48 kHz/16 bit is reduced
to 44.1 or 48 kHz/16 bit. (See page 53.)
For your reference:
• Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories
Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel)
sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.
• Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit,
DVDs are recorded in 44.1 kHz/16 bit ~ 192 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from
the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from
titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic
Surround Sound Decoders please contact your local dealer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Connecting Amplifier (5.1 ch Surround system) [Digital connection]
DECK Dolby Digital Decoder Amplifier Speaker
or
DECK DTS (Digital Theater Systems) Decoder Amplifier Speaker
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital bitstream
or DTS bitstream is output from the DECK OPTICAL digital audio output connector.
When DECK is connected to a Dolby Digital decoder or DTS decoder, you can
enjoy theater-quality audio in your home. [An optical digital audio cable (optional)
is required when an optional Dolby Digital decoder or DTS decoder is used.]
Notes on connecting an optical
digital audio cable (optional)
• Firmly connect the cable to the
connector.
Surround
Speaker
Surround
Speaker
[5.1ch Surround system]
Center
Speaker
DVD/VCR DECK
(Rear)
Decoder with
Dolby Digital /DTS
processing (optional)
Front
Speaker
Front
Speaker
To Optical
Digital Audio
Input Connector
Amplifier
OpticalDigital
Audio Cable
(optional)
Subwoofer
Caution for optical digital audio output connector:
• When connecting an amplifier (with an Optical Digital Input Connector) which does not
contain the Dolby Digital or DTS decoder, be sure to select “PCM” at “Dolby Digital”
and “PCM” at “dts” of the Settings for DVD Operation “Audio Output” (see p. 53).
Otherwise, any attempt to play DVDs may cause such a high level of noise that it may
be harmful to your ears and damage your speakers.
• When a Dolby Digital/DTS decoder is connected, please select “Bitstream” at “dts” or
“Dolby Digital” of the Settings for DVD Operation “Audio Output”.
If “PCM” is selected, there will be stereo sound. (See p. 53.)
• CDs can be played as usual.
Note:
• Some DTS decoders which do not support DVD-DTS interface may not work properly with DECK.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No’s. 5,451,942,
5,956,674, 5,974,380, 5,978,762, 6,487,535 and other US. and world-wide patents issued and
pending. “DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup for Basic Connections (Ready to Play)
Before doing Initial Setup
Turn TV on.
1
a
b
See connections
RF Coaxial Cable Connection and
AV Cable Connection on page 12.
2 <RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
[DECK ➛ TV]
• Go to “Initial Setup (Ready to Play).” (See below.)
3
[Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
Initial Setup (Ready to Play)
Press VCR on remote for VCR mode.
1
2
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel
and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR’s output channel, please see “VCR’s Output Channel” on page 19.
Plug VCR Power plug into an AC wall outlet.
CH AUTO SET PROCEEDING
Notes
CANCEL : STOP
• Function buttons are void during Initial Setup.
• To eject a tape during Auto Set, press EJECT on remote
or STOP/EJECT twice on DECK.
Then make settings manually. (See p. 18.)
• If Auto Clock Set takes more than 30 minutes,
press STOP and perform settings manually. (See p. 18.)
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
Continued on next page...
16
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Settings are made automatically.
When complete, this screen appears.
3
EJECT
If “AUTO CLOCK SET IS INCOMPLETE”
appears, manually set clock (below).
ACTION
SELECT
AUTO CLOCK SET
SET
IS
I
NCOMPLETE
VCR
PLEASE SET CLOCK BY
PRESSING ACT ON KEY
I
Manual Clock Set
If Auto Clock Set was incomplete.
Press ACTION* on remote to display
CLOCK screen.
1
SET
CLOCK
1 / 1/2004 THU--1
-
2:00PM
DST:
-----------------------
ON
SELECT
END
:
:
SET : SET
ACT
I
ON
Press
to select the month and SET to
STOP/EJECT
set. In the same manner, select and set
the date, year, time, and DST (Daylight
SavingTime).
2
SET
CLOCK
6 /20/2004 SUN
-
-
15:30PM
DST:
-----------------------
ON
SELECT
START
:
:
SET : SET
ACT
I
ON
Press ACTION to start clock and exit.
3
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset Language, Channels, Clock,
MENU
• PROGRAM functions are not available
Press ACTION*
to display MENU.
SET UP VCR
when using COMPONENT Video Output
and S-VIDEO OUT. Please set TV to
either RF INPUT or VIDEO INPUT, and
then press PROGRAM.
1
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SELECT :
EXIT
SET : SET
: ACTION
Language
Channels
Clock
2
1) Press
to select
1) Press
to select
1) Press
to select
“SET UP CHANNEL,”
language item.
“SET CLOCK,” and
and press SET.
press SET.
MENU
MENU
MENU
SET UP VCR
SET UP VCR
SET UP VCR
SET UP CLOCK
SET UP CLOCK
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SELECT :
EXIT
SET:SET
SELECT :
EXIT
SET:SET
SELECT :
EXIT
SET:SET
: ACTION
: ACTION
: ACTION
2) Press
to select
2) Press SET repeatedly to
change language item as
shown below.
2) Press
to select
“MANUAL,” and press SET.
(For Auto Clock Set, select
“AUTO CLOCK SET.”)
“ANTENNA,” then
press SET to set your
antenna system
MENU
PREPARAR VCR
FIJAR RELOJ
FIJAR CANAL
LANGUE/LANGUAGE:ESPAÑOL
SALIDA DE VCR CANAL : 3
(“TV” or “CABLE.”)
SET
OC
C
L
OC
SET
JUS
K
SET UP CH
ANNEL
AUT
O
C
L
K
M
A
NUAL
ANTENN CABLE
A
:
T
I
M
E
ZO
N
E
A
D
T
:
0
A
U
T
O
SET
W
EA
K
SIGNAL DISPLAY : OFF
ELEGIR :
SALIR : ACTION
FIJAR:SET
SELECT
EXIT
:
:
SET : SET
ACT
I
ON
SELE
CT
:
:
SET:SET
For Spanish
EXIT
ACT
I
ON
(“TIME ZONE ADJUST”
appears only when auto
clock is set.)
3) Press
to select
“AUTO SET,” then
press SET.
SET
CLOCK
• If you use a Cable Box,
set it to the PBS channel
in your time zone.
1 / 1/2004 THU--1
-
2:00PM
DST:
-----------------------
ON
For French
SELECT
END
:
:
SET : SET
ACT
I
ON
MENU
SET UP VCR
CH AUTO SET PROCEEDING
CANCEL : STOP
SET UP CLOCK
3) Press
and to
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
select, then set the date,
time, and DST (Daylight
Saving Time).
SELECT :
EXIT
SET:SET
: ACTION
• After Channel Auto Set
is finished, Auto Clock
Set will be performed.
For English
4) Press ACTION to start
Clock and exit this
mode.
3) Press ACTION to exit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR’s Output Channel
POWER
*Important: If a remote control button does not work
when pressed, press the VCR button
NUMBER
keys
on the remote and try the button again.
CH
/
ADD/DLT
ACTION
SELECT
Time Zone Adjust
VCR’s Output
Channel
to select
“VCR’S OUTPUT CH.,”
and press SET.
(Only when Auto Clock is set.)
SET
VCR
1) Press
1) Press
to select
“SET CLOCK,” and
press SET.
MENU
MENU
SET UP VCR
SET UP VCR
SET UP CLOCK
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
SELECT :
EXIT
SELECT :
EXIT
SET:SET
SET:SET
: ACTION
: ACTION
2) Press SET.
2) Press
to select
“TIME ZONE ADJUST,”
I F YOU PRESS ACT
KEY, VCR’ S UTPUT CH
ITCHES CH
I
ON
SET
C
L
OC
K
Add or Delete a Channel
O
O
SW
T
4.
AUT
O
CL
OC
K
SET
M
ANUAL
To add channel:
T
I
M
E
ZO
N
E
A
D
JUS
T
:
0
Select channel with NUMBER keys
and press ADD/DLT.
3) Press ACTION.
SELE
CT
:
:
SET SET
:
EXIT
ACT
I
ON
CHANNEL 08 ADDED
PLEASE TUNE
CH
YOUR TV TO
4
.
and press SET to
subtract or add hour(s)
as necessary.
To delete channel:
Select channel with CH
/
or
NUMBER keys and press ADD/DLT.
After 3 seconds
3) Press ACTION.
C
HANNEL 08 DE
L
E
TED
• “TIME ZONE ADJUST”
returns to “0” if clock is
set manually.
MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:4
DST (Daylight Saving Time)
SELECT :
EXIT
SET:SET
DECK auto adjusts clock for DST.
(p. 17.)
: ACTION
• To Make Corrections,
repeat steps 1) ~ 3).
Spring (First Sunday in April)
DST:ON ➛ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON ➛ Turns clock back one hour.
• If your area does not observe
Daylight Saving Time, select
DST:OFF.
• Keep these time changes in mind
when programming DECK for
timer recordings.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback/ Record on a Tape
Ready Checklist
EJECT
VCR/TV
All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)
CH
/
Playback a Tape
Insert a tape.
1 • DECK power comes on. If Auto VCR/TV (see
p. 32) is set to “OFF,” press VCR/TV on the
remote for VCR mode.
VCR
Press PLAY* to play a tape.
• If tape has no rec. tab (p. 6), auto play begins.
FF/
DVD
PLAY
STOP
2
SLOW+
REW/
SLOW-
Special Features During Play
Forward/Reverse Scene Search
➛ Press FF/SLOW+ or REW/SLOW-.
➛ Press PLAY to release.
After search has begun, each additional press of
FF or REW changes speed.
PAUSE/
STILL
REC
SPEED
Notes
• Picture interruption may occur with some TVs.
• FF and REW search speed may vary depending
on current tape position.
• After 10 minutes in search mode, VCR returns to
Play mode to protect the tape and the video heads.
Notes
• These features work best in SP or SLP mode.
• The sound will be muted.
• To reduce picture noise, see “Manual
Tracking Control” on page 4.
• After 3 minutes in Still or Slow mode, VCR
stops to protect the tape and the video heads.
Still (Freeze) Picture
➛ Press PAUSE/STILL.
➛ Press PLAY to release.
Frame by Frame Picture
➛ Press PAUSE/STILL in Still mode.
➛ Press PLAY to release.
Slow Motion Picture
➛ Press FF/SLOW+ (increase speed) or
REW/SLOW- (decrease speed) in Still
mode.
Playback using DECK buttons
2Press PLAY.
1Insert a tape.
➛ Press PLAY to release.
Press STOP to stop a tape.
3
Rapid Rewind/FF
Press REW/SLOW- or FF/SLOW+ in Stop
mode to rewind or fast forward a tape.
• Rewinds a T-120 tape in approx. 1 minute.
Multi Function Display
Press EJECT on remote,
or STOP/EJECT on DECK to eject a tape.
Press STOP/EJECT to stop
and/ or eject a tape.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Record on aTape
This video recorder, equipped with HQ
(High Quality) system, is compatible
with existing VHS equipment.
Insert a tape with a record tab (p. 6).
1
2
• DECK power comes on. If Auto VCR/TV (see p. 32)
is set to “OFF,” press VCR/TV on the remote for
VCR mode.
Only use tapes with the
mark.
Only tapes tested and inspected for
use in 2, 4, 6, and 8 hour machines
are recommended.
Press CH
, or NUMBER keys
to select the channel.
• If channel number is over 100, first press 100 key
then the other 2 digits.
Note
• For “LINE” input, see p. 35.
Remove loose or peeling
labels from tapes to prevent
tape jam.
Press SPEED
to select the record speed (p. 4).
SP = Standard Play
SLP = Super Long Play
• Speed appears on-screen and on Multi Function Display.
3
4
Press REC
to start recording.
(The VCR REC indicator lights up on Multi Function
Display),
CH 02
0
:
00
:
00
SP
• To edit out unwanted scenes, press PAUSE/STILL
to pause, and again to resume recording.
• You cannot view another channel during recording.
REC TIME: 0:30
Press STOP
TIME
:
PRESS REC KEY
CANCEL:PRESS STOP KEY
to stop recording.
5
<One Touch Recording screen>
One Touch Recording (recording in progress),
Normal Rec
4:00 3:00
0:30
2:00
1:00
1:30
➛
press REC repeatedly to set the recording length
(30 min. ~ 4 hours) (see right).
• DECK shuts off after the preset record length.
Record one station, watch another,
➛
press VCR/TV on the remote
(change to TV mode),
Record using DECK buttons
➛
select channels at TV (recording continues).
4 Press REC
Select Channels at DECK (In Stop or
to start
Insert a tape.
1
Rec. Pause mode)
recording.
➛
press VCR/TV on the remote
(change to TV mode),
➛
select channels at DECK.
Play a disc while recording a tape.
➛
➛
insert a disc during recording,
press DVD, and then press PLAY.
Multi Function Display
Notes
Select
Channel.
2
• It is not possible to record from DVD/ CD to
VHS tape using DECK.
• Watching one channel and recording another
is not possible when using Cable Box or
DSS Receiver.
Press STOP/EJECT to stop.
• After 5 minutes in Pause mode, DECK stops to
protect a tape and video heads.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic DVD Operation
Press POWER* on the remote or DECK.
Ready Checklist
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn the stereo system’s power on.
1
2
Press DVD to select DVD mode.
• If a disc is already inserted, go to step 4.
(Depending on the disc, playback may
start automatically.)
Press OPEN/CLOSE,
3
and then place a disc into the disc tray.
OPEN/
CLOSE
• Hold disc by its edges
only (p. 6) with printed
side up and use guides
POWER
to place into tray.
1
2
10
Use 1 3” (8 cm)
or
5” (12 cm) disc.
2
NUMBER
keys
DVD-RAM ➡ see p. 42
Press PLAY to start playing.
SELECT
4 Disc tray closes automatically.
MENU
STOP
• You may also close tray by
CLOSE
READING
pressing OPEN/CLOSE.
• Data reading time differs with
each disc.
SET
FF/
SLOW+
DVD
PLAY
<Example1>
REW/
SLOW-
TITLE MENU
SKIP+
If an interactive DVD*1 is used
and TITLE MENU appears, go
to step 5.
SKIP
-
Dogs Castles
PAUSE/
STILL
VSS
Birds
Lovers
TITLE
RETURN
Press
or
5
NUMBER keys (see
below) to select title,
and press SET or
PLAY to start playing.
• Pressing SET or PLAY
is not necessary when
using NUMBER keys.
Operation using DECK buttons
3, 7 Press
<Example2>
Using NUMBER keys starts play automatically.
The number of available titles varies with each disc.
OPEN/CLOSE.
1Press
POWER.
1 digit number
2 digit number
1 •••• 1
12 ••• 10 ➛ 1 ➛ 2
<Input
4 Press PLAY.
3Insert a disc.
Example>
Press SKIP+
previous menu screen.
| or SKIP- |
to go to next or
• SKIP function not available with all discs.
Please refer to disc jacket for operation information.
To return to menu (play stops)
Press TITLE, MENU, or RETURN.
6 Press STOP.
Press STOP to stop playing.
6
7
*1 Interactive DVD...
May include multiple camera angles,
stories, etc.
Press OPEN/CLOSE to eject the disc.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
■ Forward/Reverse Scene Search
V.S.S. (VirtualSurroundSound)
Press FF/SLOW+ or REW/SLOW- during play.
Press PLAY to release.
Enjoy a surround-like effect if you are
using two front speakers only. The effect
is broadened and sound seems to come
from virtual speakers on either side if the
disc has surround signals recorded on it.
• Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
■ Forward/Reverse Chapter/Track Skip
Press SKIP+
| or SKIP- |
during play.
Press VSS in DVD mode.
• The Surround sound effect can be
changed by pressing VSS repeatedly as
shown by the figure below.
Each press skips a chapter (DVD-Video),
track (DVD-Audio/CD) or Program/Play List/
Marker (DVD-RAM).
DVD-Video, DVD-Audio and CD
VSS OFF
• Pressing SKIP- |
once midway through a
chapter/track returns to the start of that
chapter/track. Each additional press skips
back one chapter/track.
VSS1
Current playback position
VSS2
VSS OFF (default)
VSS3
Chapter/Track Chapter/Track Chapter/Track
Note
Reverse Skip
DVD-RAM
• Pressing SKIP- |
program/play list returns to the start of that
program/play list. Each additional press skips
back one program/play list.
Forward Skip
• Surround sound effect is available in DVD
mode only.
• Turn off the surround effects on the other
equipment.
• V.S.S. will not work, or will have less
effect, with some discs.
• Turn V.S.S. off if it causes distortion.
• Sound will only come from the two front
speakers if V.S.S. is on.
once midway through a
Current playback position
Marker
Program/Play List Program/Play List Program/Play List
Reverse Skip
Forward Skip
Resume Function
■Still Picture or Pause
DECK memorizes the point where STOP is
Press PAUSE/STILL during play.
pressed (STOP
is displayed on screen).
Press PLAY to release.
• DVD : DECK will enter still picture mode.
• CD : DECK will enter pause mode.
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is not
canceled when power is turned off and on.
• RESUME works only with discs for which
elapsed play time is displayed during play.
• When a DVD-RAM still picture is played
back, the counter will not be displayed,
however RESUME will function.
■ Frame by Frame Picture (DVD)
Press PAUSE/STILL in still mode.
Press PLAY to release.
• Each press advances picture one frame.
• Hold button down for consecutive frame advance.
• Whether pictures are advanced by “FRAME” or
“FIELD” is selected automatically. (See p. 54.)
Notes
■Slow Motion Picture (DVD)
• Please read the disc jacket for operation
information.
Press FF/SLOW+ or REW/SLOW- in still mode.
Press PLAY to release.
• Slow motion speed, slow at first, is increased
with each additional press of the button up to
5 levels.
• If a single sided disc is placed in upside
down, “THIS TYPE OF DISC CANNOT
BE PLAYED. PLEASE INSERT A
DIFFERENT DISC” is displayed.
• Remove disc and press DECK POWER
off when not in use.
• Disc continues to rotate with menu
displayed even after play is done.
Press STOP to clear menu display when
finished with menu.
Auto-Power Off Function
Power turns off after DECK has been in
Stop mode (DVD) for about 5 minutes.
• When
appears on the screen while a button is
being operated, it means that the corresponding
operation is prohibited by DECK or the disc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording
Ready Checklist
All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
Clock set correctly. (p. 18)
POWER
Tape has record tab intact. (p. 6)
Remote is in VCR mode. (Press VCR.)
Sufficient tape remaining for recording time.
Press PROG*
to display Program.
1
ADD/DLT
SELECT
1) Press
2) Set record DATE,
press to select:
.
P DT STA
R
T
STOP
CH SPD
1
2
3
4
-- --
-- --
-- --
-- --
:
:
:
:
-- --
-- --
-- --
-- --
:
:
:
:
-- -- --
-- -- --
-- -- --
-- -- --
2
SET
VCR
1~31= one time, or
DAILY=Monday~Friday,
or WEEKLY= same time
each week.
SELECT
EXIT
:
SET:SET
: PROG
Example
Today
• See selection order left.
31
1
12
14
3) Set remaining items,
press SET
DAILY
WEEKLY
(SU)
SELECT
Selection Order
/
to set START/ STOP times,
CH (channel) or LINE
input (p. 35), and tape
speed (SP, SLP).
13
PROG
WEEKLY
(MO)
WEEKLY
(SA)
Then press
to select.
Press PROG
to end programming.
To Enter More Programs,
press
P DT STA
R
T
ST
O
P
CH SPD
1 13 00p
2
:
3:20p 02 SLP
3
2
3
4
-- --
-- --
-- --
:
-- --
-- --
-- --
:
-- -- --
-- -- --
:-- -- --
VCR mode Indicator
VCR REC Indicator
:
:
to select and
:
SET COMPLETED
CANCEL
SELECT
EXIT
press SET
:
:
ADD/DLT
SET:SET
to set an unused program
number, and then repeat
step 2.
: PROG
VCR
TIMER REC
Hi - Fi
Or
TIMER Indicator
Press PROG
to exit.
<Multi Function Display>
• The “Timer” Indicator lights up on DECK.
• You can set Timer Recording with the power on or off.
• “TIMER REC WILL START SOON” appears on-screen for 2 minutes
before Timer Recording starts. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode indicator and
“REC” will flash on Multi function Display.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Review, Replace or Clear Program Contents:
(Recording is not in progress)
Press PROG
To cancel a Timer
1
2
to display Program List.
Recording in progress...
Hold down STOP in VCR mode for
a few seconds to cancel the Timer
Recording.
(The “TIMER” Indicator goes out
on Multi Function Display.)
P DT STA
R
T
ST
O
P
CH SPD
Press
1 13
2 14
2
7
:
00p
3
:
20p 02 SLP
:
00p
7
-- --
-- --
:30p 10 SP
:-- -- --
:-- -- --
to select number.
3
4
-- --
-- --
:
:
CANCEL
SELECT
EXIT
:
:
ADD/DLT
SET:SET
: PROG
• Any future daily or weekly recording
will be performed as programmed.
To Replace program...
3
P DT STA
1 13 00p
2 14 00p
R
T
ST
O
P
CH SPD
20p 02 SLP
7:30p 10 SP
Repeat Step 2 (p. 24)
to set new programs.
2
:
3:
7
:
3
4
-- --
-- --
:
:
-- --
-- --
:
-- -- --
:-- -- --
SELECT
EXIT
:
SET:SET
: PROG
or
To Clear program...
Press ADD/DLT.
P DT STA
R
T
-- --:-- --:-- -- --
ST
O
P
CH SPD
1
2 14
7
:
00p
7:30p 10 SP
3
4
-- --
-- --
:
-- --
:-- -- --
-- --:-- -- --
:
SELECT
EXIT
:
SET:SET
: PROG
Press PROG
to end the programming.
4
Notes
• If you are using a Cable Box, the VCR’s channel for Timer Recording must be set to
the Cable Box input channel and Cable Box must be manually set to the desired
channel. Cable Box power must be left on.
• 2 minutes before Timer Recording is performed, “PLEASE PREPARE FOR TIMER
REC” appears and Timer Indicator flashes.
Be sure a cassette with record tab is loaded and DECK is in Stop mode.
• If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION”
appears on-screen, please re-enter the timer programs.
• If the start time for Timer Recording comes up during recording and playing back,
Timer Recording will not be performed.
Important notes when using DSS Receiver
• When recording programs via DSS Receiver, DSS Receiver must be left on.
• When recording programs via an antenna or cable, DSS Receiver must be turned off.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MTS Broadcast/ VHS Hi-Fi Stereo System
Connection
Make the Audio/Video Connection as shown on pp. 12 ~ 15.
• You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.
Receivable Broadcast Types
The following are possible audio broadcast types and on-
screen displays.
The signal being received is indicated with a “ ” mark while
the selected audio mode is indicated with an arrow.
To display the broadcast signal being received,
➛ press DISPLAY*.
CH 02
MTS Stereo and SAP broadcast
STOP
12:00
12:00
12:00
A
A
A
M
M
M
0
0
0
0
:
:
:
:
00
:
00
SP
STEREO
SAP
Multi-channel Television Sound
Stereo (main language) and
Secondary Audio Program (sub
language) broadcasts are being
received simultaneously.
M
ONO
Select STEREO or SAP audio mode.
AUDIO
MTS Stereo broadcast
CH 02
STOP
(SAP/Hi-Fi)
00
:
00
SP
STEREO
SAP
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
• If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
DISPLAY
MONO
SAP broadcast
CH 02
STOP
00
:
00
SP
STEREO
SAP
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
M
ONO
Equipped with
®-TV
Noise Reduction for
true MTS reproduction.
®-TV Noise
Reduction is required
for good stereo
MONO broadcast
CH 02
STOP
12:00AM
00
:
00
SP
separation and audio
STEREO
SAP
Normal monaural sound broadcast.
®
fidelity.
is a
M
ONO
registered trademark,
and is licensed by
®
Technology Licensing.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Audio Mode for Recording
Press AUDIO (SAP/Hi-Fi)
to display audio mode.
1
2
(Display disappears after 5 seconds.)
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
STEREO
SAP
M
ONO
• Refer to “Receivable Broadcast Types” on p. 26.
• Arrow indicates selection.
Make a recording.
See p. 21.
3
Audio Mode for Playback
Start playback.
See p. 20.
1
Press AUDIO (SAP/Hi-Fi)
2
3
to display audio mode.
Press AUDIO (SAP/Hi-Fi) repeatedly
to select desired mode.
H
H
H
IFI : L
IFI : L
/R
IFI
:
R
N
ORMAL
• Select “HIFI (L/R)” or “HIFI (L)” or “HIFI (R)” to listen to stereo
recordings in stereo sound.
Select “NORMAL” for monaural sound.
• Display disappears after 5 seconds.
• Arrow indicates
selection.
Notes
• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound.
Standard stereo tapes will playback in monaural sound.
• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14.)
• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.
• Hi-Fi and normal audio playback volume level may differ.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi-Brand Control Feature
Multi-Brand Control Setup
The Remote Control can be set to control some TVs.
Find your TV Brand Code Number on the
1
2
following page.
Set up for TV control,
➛ hold down TV button,
➛ enter code with NUMBER keys.
Confirm code entry,
3
➛ press POWER to turn selected unit on or off.
• See table below for controllable functions in each mode.
• Repeat setup after remote battery replacement.
Notes
• Remote will not control every TV made by the
manufacturer listed. If you get no response, your
particular unit cannot be controlled.
There are NO additional codes for the products
listed. If your product is not listed, then the
remote is not compatible with that product.
Using Multi-Brand Control
After remote is set up, you can select VCR, DVD, or TV
for the desired function.
Press VCR, DVD, or TV on the remote.
(Table below shows available remote buttons for each mode.)
Unit
DVD/VCR
Mode
TV
VOL
DVD
+/-
All
VCR
EJECT/OPEN/CLOSE*,
DISPLAY, PLAY, STOP,
FF/SLOW+, REW/SLOW-,
VCR/TV, PAUSE/STILL, SKIP,
AUDIO, CM/ZERO, SPEED, REC,
TAPE POSITION, PAGE,
COUNTER RESET
POWER, INPUT, NUMBER keys,
ENTER, CH , VOL
/
+
/-
TV
* Bold: VCR Function
Bold Italic: VCR and DVD Functions
Normal: TV
Italic: DVD Function
Notes
• Not all functions listed may be controllable.
• In TV mode, it may be necessary to press ENTER after pressing NUMBER keys
for channel selection.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Brand Code Numbers
Panasonic ......................................... 01, 02
Quasar.............................................. 01, 02
RCA ......................................................... 03
GE ........................................................... 03
Zenith ...................................................... 04
Magnavox ............................................... 05
Sylvania .................................................. 05
Sharp................................................. 06, 07
Sony ........................................................ 08
Toshiba ................................................... 09
Sanyo ...................................................... 10
Fisher...................................................... 10
JVC ......................................................... 11
Hitachi ..................................................... 12
Mitsubishi .......................................... 07, 13
Samsung ................................................ 14
Gold Star .................................... 15, 16, 17
Important Notes
• Some manufacturers use several codes for one brand.
If the first code entered fails, try the next one listed.
• Some TVs require you to turn on the power manually.
TV
POWER
NUMBER
keys
DVD
VCR
ENTER
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Operation
Search System
Zero Search
For each recording, an invisible index
mark is placed on the tape. A program
index and information are also included
for timer recordings. These marks are
used to access or scan recordings.
To quickly return to a specified tape location.
Press DISPLAY during play
1to display Counter.
Index Search
PLAY
12:00AM
Press COUNTER
RESET on remote at
desired position to
reset to “0:00:00”.
0
:
00
:
00
SP
2
INDEX SEARCH
Press SEARCH*
ENTER INDEX NUMBER :1
1
to display SEARCH
USING
1
-
9 KEYS
in Stop or Play
mode, and then
press NUMBER
keys to select
FORWARD SEARCH :FF
REVERSE SEARCH :REW
EXIT :SEARCH
Continue to record, playback etc.
3
4
5
recording number.
• To calculate
number, see below.
Press STOP.
Press FF/SLOW+
or REW/SLOW- on
the remote to start
search.
REW
12:30
A
M
CH 02
Press CM/ZERO
in Stop mode to start
Zero Search.
0
:
30
:
30
SP
INDEX SEARCH
Play begins at
search end.
STOP
12:31
A
M
CH 02
2
0
:
00
:
00
SP
To search forward
or back 1 index,
press FF/SLOW+ or
REW/SLOW- on the
remote while
• DECK will go into FF or REW mode and
stop at the last point the Counter was set
to 0:00:00.
FORWARD SEARCH : FF
REVERSE SEARCH : REW
screen left is
Commercial Skip
displayed (10 sec.).
• To cancel, press
PLAY or STOP.
DECK fast forwards (skips) over 1, 2, or 3
minutes of recorded tape as desired.
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Press CM/ZERO in Play mode.
1
• The skip time can be changed by
pressing CM/ZERO repeatedly as shown
by the figure below.
1
2
3
4
5
6
7
PLAY
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1st Press
2nd Press
3rd Press
1 min Skip
2 min Skip
3 min Skip
1
2
3
4
5
6
7
NOTE: indicates start points of each recording.
Note
• No indication appears on-screen.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Tape Select
Tape Position Display
Select your tape length so the tape position
and amount of tape remaining are properly
displayed.
To find out the present tape position and
amount of tape remaining.
(See “Tape Position Display” section right.)
Tape position is displayed incorrectly
in the following cases:
• If VHS-C type cassettes, tapes under 30
minutes, tapes over 180 minutes, or
incompatible tapes are used.
• If the correct tape length is not selected.
(See “Tape Select” section left.)
Press ACTION
1
2
to display MENU.
MENU
Press
to select
SET UP VCR
SET UP CLOCK
“SET UP VCR,” and
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
press SET.
Press TAPE POSITION
SELECT :
EXIT
SET : SET
: ACTION
to detect current tape position.
1
Press
to select
SET UP
V
CR
• “DETECTING TAPE
DETECTING TAPE POSITION
REPEAT PLAY
:
:
:
:
:
O
FF
RE
M
OTE
SHU
FRONT DISPLAY
AUT VCR/TV
TAPE SELECT
W
ARN
I
NG
O
O
O
O
N
“TAPE SELECT,”
and press SET to
set “T-120,” “T-160”
or “T-180.”
3
POSITION” only
-
AUT
O
T
OFF
FF
N
appears the first time a
cassette is inserted
and it takes several
seconds for correct
O
N
: T-120
SELE
END
C
T
:
:
SET SET
:
ACT
I
ON
T-120
T-160
T-180
SP
indication to appear.
• The present tape
position indication and
amount of tape
• Select “T-120” for tapes 120 minutes or
less, “T-160” if 140 or 160 minutes, and
“T-180” if 180 minutes.
R 120 MIN.
BE
G
IN
END
remaining (according to
tape speed) are
displayed.
Tape remaining time
display may not be
precise.
Press ACTION
4 to return to normal screen.
Repeat Play
Set to playback a recording over and over.
Press TAPE POSITION
(or wait 5 seconds) to return to
normal screen.
2
Press ACTION
1
2
to display MENU.
MENU
Press
SET UP VCR
SET UP CLOCK
to select “SET UP
VCR,” and press
SET.
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
Auto Operation Functions
Auto Play
SELECT :
EXIT
SET : SET
: ACTION
Insert a tape ➛ Power comes on,
➛ Play starts if there is no record tab
(see p. 6).
Press
SET UP
V
CR
REPEAT PLAY
:
:
:
:
:
O
FF
REM
OTE
SHU
FRONT DISPLAY
AUT VCR/TV
TAPE SELECT
W
ARN
I
NG
O
O
O
O
N
to select “REPEAT
PLAY,” and press
SET to set “ON” or
“OFF.”
3
-
AUT
O
T
OFF
FF
N
O
N
: T-120
Auto Rewind
SELE
C
T
:
:
SET SET
:
END
ACT
I
ON
Play
Fast Forward
➛ Tape end ➛ Rewind ➛ Stop
• Play repeats at tape end or if unrecorded
portion over 30 sec. is detected.
Play Auto Eject
Press ACTION
to return to normal screen.
(Repeat Play must be off)
4
Play ➛ Tape end ➛ Rewind ➛ Stop
Note
➛ Tape ejects if some programs are set.
• For repeat play in DVD mode, see page 47.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Special VCR Features
Blue LIGHT ON/OFF Feature
VCR/TV SelectionFeature
You can turn DECK’s blue light off if you
find it to be glaring.
The VCR/TV selection can be set to auto or manual.
Press ACTION*
To turn LIGHT off,
press DISPLAY for 5 seconds
in VCR mode.
1
2
to display MENU.
MENU
Press
SET UP VCR
SET UP CLOCK
to select “SET UP VCR,”
and
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
To turn LIGHT on, repeat above.
press SET.
SELECT :
EXIT
SET : SET
: ACTION
Notes
• This operation is not possible in power
off mode.
• If you unplug DECK, DECK turns to
defult setting (Blue light turns on).
SET UP
V
CR
Press
REPEAT PLAY
:
:
:
:
:
O
FF
RE
M
OTE
SHU
FRONT DISPLAY
AUT VCR/TV
TAPE SELECT
W
ARN
I
NG
O
O
O
O
N
3
to select “AUTO VCR/TV,”
and
-
AUTO
T
OFF
FF
N
O
N
: T-120
press SET
to set “ON” or “OFF.”
SELE
C
T
:
:
SET SET
:
END
ACT
I
ON
• OFF(Manual): You select “VCR” or “TV” mode using
the VCR/TV button on the remote.
• ON(Auto):
“VCR” mode is automatically set when
VCR is turned on, or in Play mode.
Press ACTION
to return to normal screen.
Blue Light
4
Note
• For more on VCR/TV selection, see “Record one
station, watch another” and “Select channels at DECK”
sections (see p. 21).
REC
VCR Lock Feature
When set to ON, all operations except for timer record
and tape eject are prohibited. Useful for households with
small children.
To turn on, hold down REC on DECK in Stop
mode with no tape inserted for 7 seconds.
(Please ignore “NO CASSETTE” warning.)
V
CR
LOCK
ACTIVATED
To turn off, repeat above.
V
CR
LOCK
OFF
• VCR Lock cancels in 24 hours.
Note
• DVD functions will work even when VCR Lock is set to ON.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
Press ACTION
1 to display MENU.
MENU
Press
SET UP VCR
SET UP CLOCK
to select “SET UP
2
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
CHANNEL,” and
press SET.
SELECT :
EXIT
SET:SET
: ACTION
SET UP CH
ANNEL
Press
ANTENN ABLE
A
:
C
AU
T
O
K
SET
3
to select “WEAK SIGNAL
DISPLAY,” and
press SET
WEA
SIGNAL DISPLAY:OFF
SELE
EXIT
CT
:
:
SET: SET
ACT
I
ON
to set “ON” or “OFF.”
• ON: Picture is displayed regardless of signal
condition, and may not always be clearly visible.
OFF: Screen turns solid blue when signal is weak or
non-existent.
ACTION
SELECT
• Selecting ON has no effect on connected equipment
with blue back feature.
Press ACTION
to return to normal screen.
4
SET
Auto Shut-Off Feature
The power shuts off at a preset time.
Press ACTION
1 to display MENU.
MENU
Press
SET UP VCR
SET UP CLOCK
to select “SET UP VCR,” and
2
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
press SET.
VCR’S OUTPUT CH:3
DISPLAY
SELECT :
EXIT
SET : SET
: ACTION
Press
SET UP
V
CR
REPEAT PLAY
:
:
:
:
:
O
FF
RE
M
OTE
SHU
FRONT DISPLAY
AUT VCR/TV
TAPE SELECT
W
ARN
I
NG
O
O
O
O
N
to select “AUTO SHUT-OFF.”
Press SET repeatedly to
change shut-off time as
3
-
AUT
O
T
OFF
FF
N
O
N
: T-120
SELE
C
T
:
:
SET SET
:
END
ACT
I
ON
shown below.
2 Hours
4 Hours
OFF
6 Hours
Press ACTION
4 to return to normal screen.
Note
• The shut-off countdown will not function during Play or
Record.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Special VCR Features (continued)
*Important: If a remote control button does not work
Remote Warning Feature
If Multi-brand feature is used (p. 28), and this feature is
set to on, a warning appears whenever an invalid key
is pressed in TV mode.
when pressed, press the VCR button
on the remote and try the button again.
Press ACTION*
to display MENU.
1
2
MENU
Press
SET UP VCR
SET UP CLOCK
to select “SET UP VCR,”
and
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
press SET.
SELECT :
EXIT
SET : SET
: ACTION
Press
SET UP
V
CR
REPEAT PLAY
:
:
:
:
:
O
FF
RE
AUT
FRONT DISPLAY
AUT VCR/TV
TAPE SELECT
MOTE
W
ARN
I
NG
O
O
O
N
to select
3
-
O
SHU
T
OFF
FF
N
“REMOTE WARNING,” and
press SET
to set “ON” or “OFF.”
ACTION
SELECT
O
ON
: T-120
SELE
C
T
:
:
SET SET
:
END
ACT
I
ON
• If “OFF,” remote warning will not appear
when invalid key is pressed.
SET
Press ACTION
STOP
4to return to normal screen.
STILL/
PAUSE
Multi Function Display
(Front Display) ON/OFF Feature
INPUT
REC
Multi Function Display (Front Display) can be set to
ON/OFF.
Press ACTION
to display MENU.
1
2
MENU
Press
SET UP VCR
SET UP CLOCK
to select “SET UP VCR,”
and
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
press SET.
SELECT :
EXIT
SET : SET
: ACTION
Press
SET UP
V
CR
REPEAT PLAY
:
:
:
:
:
O
FF
RE
AUT
FRONT DISPLAY
AUT VCR/TV
TAPE SELECT
MOTE
W
ARN
I
NG
O
O
O
O
N
to select
3
-
O
SHU
T
OFF
FF
N
“FRONT DISPLAY,” and
press SET
to set “ON” or “OFF.”
O
N
: T-120
SELE
END
C
T
:
:
SET SET
:
ACT
I
ON
Multi Function Display
(Front Display)
• ON : When set to “ON,”
Multi Function Display is displayed.
OFF: When set to “OFF,”
Multi Function Display is not displayed.
If a Timer Program is set,
Multi Function Display is displayed.
Press ACTION
to return to normal screen.
4
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CopyingYour Tapes (Dubbing)
Connection
VCR/ Camcorder (Hi-Fi)
TV
DVD/VCR DECK
Front of DECK
IN FROM ANT.
VIDEO IN 2
L-AUDIO IN2-R
IN1
OUT
OUT
VIDEO
L
AUDIO
R
VIDEO
VHF/
UHF
VHF/UHF
OUTTOTV
L
R
(Audio/Video In Terminals
on the front of DECK are
available)
AUDIO
1
Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.
To monitor the dubbing, also connect TV as shown.
1
2
Connect “L” and “R” AUDIO OUT terminals on Playing VCR to “L” and “R”
AUDIO IN terminals on DECK.
In place of Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to DECK.
Playing (Source) VCR
Recording (Editing) DECK
Insert a pre-recorded tape.
Insert a blank tape with record tab.
1
2
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
Press REC, then STILL/PAUSE
immediately to enter REC/PAUSE
mode.
Press PLAY, then PAUSE
immediately to enter PLAY/PAUSE
mode.
3
The operation of steps 4 and 5 must be done on the
playing and recording VCRs at the same time.
Press PLAY to start dubbing.
Press STILL/PAUSE to start dubbing.
Playing VCR starts playback.
DECK starts recording.
4
5
Press STOP to stop dubbing.
Press STOP to stop dubbing.
Selecting the Input Mode
To Monitor Dubbing on TV
1 Turn TV on and tune to the Recording
VCR channel (CH 3 or CH 4).
Method 1: Press INPUT repeatedly.
Channel Number ↔ LINE1 ↔ LINE2
Method 2: Press CH
/
.
2 If Auto VCR/TV (see p. 32) is set to
“OFF,” press VCR/TV on the remote
for VCR mode.
Display will change as below.
1
2
3
Press
Press
(CABLE)
or
125
(TV)
69
LINE2
LINE1
• “L1” or “L2” lights up on Multi Function Display
(about 4 seconds) when LINE1 or LINE2 is selected.
• Dubbing tapes protected with Copy
Guard will result in poor quality
recordings.
Note
• LINE1: For rear audio/video connection.
LINE2: For front audio/video connection.
Caution: •Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
•Please note that some tapes cannot be dubbed on DECK.
Also, it is not possible to dub DVD/ CD to VHS tapes using DECK.
•When
appears on the screen while a button is being operated, it means
that the corresponding operation is prohibited by DECK or the disc.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operation
Subtitle Language (DVD only)
You can select a different subtitle language (if offered) than
the one set at the Settings for DVD Operation. (See p. 52.)
Ready Checklist
Please read “Basic DVD Operation”
on page 22.
[Subtitle language]
[Audio sound track language]
Press SUB TITLE*
1
in Play mode to display
English
French
German
Italian
ENG
FRA
DEU
ITA
the subtitle selection
on-screen.
• Display disappears after
5 seconds.
• When no subtitles are offered,
“-” will be displayed instead of
the language number.
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Other
ESP
NLD
SVE
NOR
DAN
POR
RUS
JPN
CHI
KOR
MAL
VIE
THA
∗
Press SUB TITLE,
, or
2
NUMBER keys to select a
desired language.
Subtitle language being played
back (see chart, right).
Te amo
Notes
• If after several presses of the button the language does
not change, language selection is not offered on the disc.
• When disc is removed, subtitles revert to initial setting
language. If the initial language is not recorded on the
disc, the disc’s priority language will appear.
• With DVD-RAM, the subtitle can only be set to ON/OFF.
The subtitle language cannot be selected.
• Change the No. by pressing
and press SET.
,
[Audio attribute 1 type, sampling
frequency, bit No. of the disc (see p. 53.)]
16 bit
44.1 kHz
• Subtitles may not change to the selected language
immediately.
LPCM
20 bit Linear PCM disc
24 bit
192 kHz
Dolby Digital 1 ch - 5.1 ch
Dolby Digital disc
DTS disc
DTS
1 ch - 5.1 ch
Audio Soundtrack Language (DVD only)
Notes
• If, after several presses of the AUDIO
button the language does not change,
language selection is not offered on the
disc.
• When disc is removed, language reverts
to initial setting. If this language is not
recorded on the disc, the language
recorded will be heard.
• With DVD-RAM, Audio Soundtrack
Language cannot be set. Audio stream
and Audio mode (LR/L/R) setting can be
made. Audio stream operation method is
the same as Audio Soundtrack
Language. Press to move the cursor
to Audio mode, then press AUDIO or
to select LR/ L/ R.
You can change the audio soundtrack language, selected
at the Settings for DVD Operation, to a different language
if available. (See p. 52.)
(This operation works only with discs on which multiple
audio soundtrack languages are recorded.)
Press AUDIO
in Play mode to display the
1
audio selection on-screen.
• Display disappears after
5 seconds.
Information of the audio stream
currently being played back is
displayed. (See page 53.)
Press AUDIO,
, or
AUDIO: 1 LR
Dolby Digital 3/2.1ch
2
NUMBER keys to select
desired language.
Audio soundtrack language
being played back (see chart,
above right).
SELECT :AUDIO /
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
When
appears on the screen while
Multiple Angle Viewing (DVD only)
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at different
angles. You can view these angles, if available, using the
ANGLE button.
Press ANGLE
in Play mode to display the
1
angle selection on-screen.
• Display disappears after
5 seconds.
ANGLE Indicator
SELECT : ANGLE
Notes
• The ANGLE Indicator lights up on
DECK when a scene recorded at
different angles is detected.
• The angle number can be set
beforehand so that the angle is
switched whenever the ANGLE
Indicator lights up.
Press ANGLE repeatedly
or
to select the
2
desired angle.
SELECT : ANGLE
Number of angle being played back.
Note
This function not available with DVD-RAM.
Vocal Selection for Karaoke Discs (DVD only)
NUMBER
keys
Press AUDIO in Play mode
1 to display the audio screen.
Press
VOCAL and
press AUDIO or
select as shown below.
to select
2
SELECT
SET
to
• DVD Karaoke (1 vocal) VOCAL ON VOCAL OFF
• DVD Karaoke (2 vocals) VOCAL V1 VOCAL V2 VOCAL V1+V2 VOCAL OFF
ZOOM
ANGLE
AUDIO
Picture Zoom (DVD only)
You can enlarge specific portions of a picture and
select the zoom ratio using the ZOOM button during
DVD playback.
SUB TITLE
Press ZOOM repeatedly to change display
as follows.
• You can enlarge the center portion of the image
to one of 2 magnifications.
Notes
• The subtitle cannot be enlarged or
moved.
• During picture zoom, “ZOOM1” or
“ZOOM2” appears on-screen for 5
seconds.
• Zooming, on some discs, may result
in poor picture quality, or may not
operate at all.
■ Use the
,
,
and buttons to move the position
up, down, left and right.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operation (continued)
Title Menu (DVD only)
Some DVDs have more than one title, e.g. movies.
If the disc offers a title menu, you can select the desired
title number. (Operation may vary according to the disc.)
Press TITLE*
TITLE MENU
in Play mode
1
Dogs Castles
Birds
to display the title screen.
Lovers
<Example>
Press
or
TITLE MENU
2
NUMBER keys
Dogs Castles
to select a title, and
press SET or PLAY
to start playing.
NUMBER
keys
Birds
Lovers
CLEAR
ACTION
MENU
• “Pressing SET or PLAY” is
not necessary when using
NUMBER keys.
Birds
of the world
SELECT
<Example>
SET
PLAY
STOP
DVD Menu (DVD only)
DVDs may offer a special menu. This menu may include
guides to unique contents, audio/subtitle languages, etc.
Although contents and operation may vary, the following
steps show basic procedure for using the menu.
TITLE
Press MENU
in Play mode to display
DVD MENU.
DVD MENU
1
1 . SUBTITLE
2 . AUDIO
3 . ANGLE
<Example>
Press
or
DVD MENU
1 . SUBTITLE
2 . AUDIO
2
NUMBER keys
to select an item, and
press SET or PLAY
to perform.
3 . ANGLE
• Pressing SET or PLAY is
not necessary when using
NUMBER keys.
<Example>
Repeat step 2 if there is
more than one menu.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
Program Play (CD only)
You can program specific tracks and order of play.
Press ACTION
Ready Checklist
DECK is in DVD mode, press DVD.
CD is inserted.
Program Repeat Play
(CD only)
1
to display DVD MAIN MENU.
DVD MAIN MENU
Press
DISC LANGUAGES
Do operation steps 1 through 5
2
to select
AUDIO OUTPUT
ST I LL MODE
TV MODE
: AUTO
1 at left on this page.
: 4 : 3 P a n & S c a n
“PLAY MODE,” and
press SET
to display.
PROGRESSIVE OUT:
PLAY MODE
OFF
Press DISPLAY to display Disc
SELECT
SET
:
Information screen.
2
: SET
END
: ACTION
(Disc Information Screen)
PLAY MODE
Press
to select
PROGRAM PLAY
RANDOM PLAY
3
4
“PROGRAM PLAY,”
and
SELECT
SET
:
press SET to display.
: SET
END
: ACTION
Press DISPLAY to display
DECK Information screen.
PROGRAM PLAY
3
4
Press
DISC
PROGRAM
1
2
3
4
5
6
7
8
9
11 16
12 17
13 18
14 19
5
15
1
8
6
to select a track
number (Track
numbers on disc are
displayed.), and
press SET.
13
2
Press SET to enter Select mode.
3
2
10 15 20
Cursor move to “OFF.”
CLEAR LAST
CLEAR ALL
SELECT
SET
END
(DECK Information Screen)
START
:
: SET
: ACTION
• Repeat step 4 to select another track.
• The selected track is added on the right side.
PROGRAM PLAY
Press
DISC
PROGRAM
1
2
3
4
5
6
7
8
9
11 16
5
15
1
8
6
5
to select “START,” and
press SET to start play
of programs in the
12 17
13 18
14 19
13
2
3
2
Press
to select “DISC.”
10 15 20
5
6
(DECK Information Screen)
CLEAR LAST
CLEAR ALL
START
SELECT
SET
:
sequence selected.
: SET
END
: ACTION
• To cancel, press STOP
during play, then press
CLEAR.
Notes
Press SET to set mode.
• Up to 15 tracks can be programmed.
• “ ” or “ ” (depending on disc) indicates additional
PROGRAM PLAY screen.
Press
• To clear the last program one by one
Press to move to “CLEAR LAST” and
Cursor moves to “REPEAT.”
To cancel, select “REPEAT :
OFF” in step 5, then press SET.
for next or previous screen.
press SET. (Pressing CLEAR on remote control
also clears last program.)
• To clear all programs
Press
to move to “CLEAR ALL” and press
SET. (Programs are also cleared when the power
is turned off or the disc is removed.)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Operation (continued)
Random Play (CD only)
Tracks are played in a random order.
Press ACTION*
Ready Checklist
DECK is in DVD mode, press DVD.
1
2
to display DVD MAIN MENU.
DVD MAIN MENU
Press
to select “PLAY MODE,”
and
press SET
to display.
DISC LANGUAGES
AUDIO OUTPUT
ST I LL MODE
TV MODE
: AUTO
: 4 : 3 P a n & S c a n
NUMBER
keys
PROGRESSIVE OUT:
PLAY MODE
OFF
SELECT
SET
:
: SET
: ACTION
END
CLEAR
ACTION
PLAY MODE
Press
PROGRAM PLAY
RANDOM PLAY
3
to select
SELECT
“RANDOM PLAY,” and
press SET
to begin random play.
SELECT
SET
:
: SET
SET
END
: ACTION
• To cancel, press STOP
during play, then press
CLEAR.
STOP
VOLUME
ADJUST
DISPLAY
PAGE
Setting the VOLUME ADJUST (DVD only)
Some DVDs are recorded in lower than average volume levels.
For these DVDs, this DECK can be set so that the average volume is
increased automatically.
Press VOL.ADJ repeatedly to change “OFF” ↔ “ON.”
• “OFF” or “ON” lights up on Multi Function Display (about 3 seconds) when
VOL.ADJ is pressed.
VOLUME ADJUST “OFF”
VOLUME ADJUST “ON”
Some DVD
[Low volume level]
Volume level is increased
when played back.
Volume is at the original level.
• “ON” is set ..... When a DVD is played back, the average volume is increased.
• “OFF” is set .... The volume level recorded on the disc is played back just as it is.
Notes
• While settings can be made with all discs, they may have no effect with some discs.
Please set as you prefer.
• When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.”
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
DVD-Audio Operation (DVD-Audio only)
This DECK, equipped with a 192 kHz/ 24 bit Audio D/A converter, supports DVD-Audio
recorded with high quality sound.
The DVD-Audio feature includes “Still Image Skip” and “Bonus Group Playback”
functions. (See below.)
Please refer to “Basic DVD Operation” on pages 22 and 23.
Still Image Skip (DVD-Audio only)
DVD-Audio still images (only if contained) can be skipped over.
PAGE :
1
Press PAGE
in Play or Pause mode to display the still image and page
number.
Each press of PAGE changes page number as shown below.
• Pressing PAGE on the last page returns to PAGE 1.
PAGE :
2
SE
Press PAGE
Press PAGE
Press PAGE
Press PAGE
PAGE
:
1
PAGE
:
2
PAGE
:
3
.......
PAGE
:
XX
SELECT
:
• Still Image Skip function not available with all discs.
Note
Bonus Group playback (DVD-Audio only)
Some DVD-Audio discs contain bonus groups. To enjoy these groups you may have to
enter a password. Refer to the disc's jacket.
Press DISPLAY in stop mode to display “On-Screen Displays.”
1
• During playback, Bonus Group tracks cannot be selected.
Note
GROUP
TRACK
:
:
2
1
DVD-AUDIO
00 : 12 : 34
Press
Press
to select “GROUP,” and press SET.
or NUMBER keys to select bonus group
2
number, and press SET (see pp. 44, 45.)
SELECT:
SET
: SET
NEXT : DISPLAY
• If the proper secret code is already entered, Bonus Group tracks can be
selected. (Secret code enter screen is skipped.)
Notes
Press NUMBER keys
BONUS GROUP
4----I
3
to enter bonus group secret code.
ENTER
-
D
I
G
T
CODE
To Make Corrections
Press repeatedly to move the cursor.
Press NUMBER keys to make the correction.
• When the proper secret code has been entered, Bonus Group track 1 playback
begins. If a mistake is made, the secret code enter screen is redisplayed.
Note
Press CLEAR to return to normal screen.
4
41
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-RAM Operation (DVD-RAM only)
You can enjoy playing your personally recorded/edited DVD-RAM discs on this DECK.
Note
• This DECK was designed for playback only. DVD-RAM recording is not possible.
Play a DVD-RAM
Do steps 1 ~ 3 on page 22.
• Play begins from the first program title recorded on
the DVD-RAM.
1
Press D.NAVI* or PLAY LIST to display Direct
2
Navigator or Play List menu for easy title or
scene selection.
• See below for “Direct Navigator” or next page for
“Play List information”.
Press STOP to stop playing.
3
4
Press OPEN/CLOSE to eject the disc.
Direct Navigator
If the DVD-RAM features Direct Navigator, a list of recorded titles is displayed. Simply select a title
number and start playback. (Operation can vary with disc used.)
Press D.NAVI
Recording
in Play/Stop mode to display the Direct Navigator
1
Program No.
Page No.
time length
menu.
Page 1/4
Direct Navigator
Press
to select a page and press
to
No.
1
Date
2002/12/24
5:15:41AM
Length
Title
Drama
select a title (Program No.).
2
00:01:00
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25
12:45:00AM
Pana NEWS
00:03:12
00:15:01
00:03:00
Then, press SET or PLAY to start playing.
• “Pressing SET or PLAY” is not necessary when
using NUMBER keys.
2
3
4
Tigers vs.Giants
Dinosaur
SELECT:
SET : SET
Using NUMBER keys starts playing automatically.
END:TITLE
The number of available titles varies with each disc.
<Input
1 digit number 1 ••••1
2 digit number 12 ••• 10 ➛ 1 ➛ 2
Recording time
and date
Titles
Example>
(Example)
Press D.NAVI to clear Direct navigator menu.
3
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
Play List
If the DVD-RAM features a Play List, your preselected list of favorite scenes is displayed for easy
access. (Operation can vary according to how you edited the DVD-RAM.)
Press PLAY LIST
Established
in Play/Stop mode to display the Play List menu.
1
2
Play List No.
Page No.
time length
Press
to select a page and press
to
Page 1/5
Play List
select a title (Play List No.).
No.
Date
Length
Title
Movie Picture
Playback
2002/12/24
5:15:41AM
00:01:00
1
Then, press SET or PLAY to start playing.
• “Pressing SET or PLAY” is not necessary when
using NUMBER keys.
2002/12/25
4:31:49AM
2002/12/25
8:24:25AM
2002/12/25
12:45:00AM
Still Picture
Playback
00:03:12
00:15:01
00:03:00
2
3
4
Hybrid Playback
Partial Playback
Using NUMBER keys starts playing automatically.
SELECT:
SET :SET
The number of available titles varies with each disc.
END:MENU
<Input
Example>
1 digit number
2 digit number
1 ••••1
12 ••• 10 ➛ 1 ➛ 2
Recording time
and date
Titles
(Example)
Press PLAY LIST to clear Play List menu.
3
10
NUMBER
keys
SELECT
SET
PLAY LIST
STOP
PLAY
D.NAVI
Notes
• Titles of Direct Navigator and Play List cannot be changed using this DECK.
• With Direct Navigator, up to 99 programs can be displayed. With Play List, up to 99 titles (999
scenes) can be displayed.
• While DVD MAIN MENU is displayed, Direct Navigator and Play List display will not appear even
if TITLE or MENU is pressed.
• When
appears on the screen while a button is being operated, it means that the
corresponding operation is prohibited by DECK or the disc.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation using On-Screen Displays
When DISPLAY is pressed, On-Screen Displays show disc
information (title/chapter/track number, elapsed playing time)
and DECK information (repeat play, play mode).
Ready Checklist
DECK is in DVD mode, press DVD.
Press DISPLAY* in Play or Stop mode
1
to display “On-Screen Displays.”
• Each press of DISPLAY changes the on-screen
display as follows. (Refer to pp. 44 ~ 48.)
(See pp. 45, 46.)
(See pp. 47, 48.)
Selected Disc information
Selected DECK information
Normal Screen
➡
NUMBER
keys
Note
• DISPLAY button does not function while main menu of
DVD, title menu of DVD, Direct Navigator or Play List
is displayed.
SELECT
SET
Press
(or
)
to select an item, and
2
3
press SET.
Press
or NUMBER keys
to select the setting, and press SET.
<Example of DVD-Video>
<Example of DVD-Audio>
<Example of DVD-RAM>
• When numbers are
displayed (e.g. title
number), NUMBER keys
are also available.
DISPLAY
• If the number entered is
not on the disc, the entry
will have no effect.
Re-enter the correct
number.
• For more details, refer to
the disc operation
information.
To return to normal
screen,
press DISPLAY
repeatedly.
Note
• When
appears on the screen while
a button is being operated, it means
that the corresponding operation is
prohibited by DECK or the disc.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
Detailed Descriptions of each On-Screen Display
■ Disc information screen (for DVD-Video)
1
3
4
1. TITLE No.
2
Go directly to a preset title number.
•Select “TITLE”, and press SET.
• Change the No. by pressing
or NUMBER keys, and press SET.
2. CHAPTER No.
Go directly to a preset chapter number.
•Select “CHAPTER”, and press SET.
• Change the No. by pressing
or NUMBER keys, and press SET.
•This function does not work with some discs.
3. Disc currently being played
The type of disc currently inserted is displayed.
4. Elapsed playing time
The screen may be changed by selecting the elapsed time.
•Select the elapsed playing time (“xx:xx:xx”), and press SET.
•Change the elapsed time by pressing NUMBER keys.
Enter time starting with seconds.
If the time entered is not on the disc, the entry will have no effect.
Re-enter the correct time.
e.g., press 0 ➛ 1 ➛ 2 ➛ 3 ➛ 4 ➛ 5 ➛ SET for “01 : 23 : 45”.
press 3 ➛ 0 ➛ SET for “00 : 00 : 30”.
•This function does not work with some discs.
■ Disc information screen (for DVD-Audio)
A.GROUP No.
Go directly to a preset group number.
•Select “GROUP”, and press SET.
• Change the No. by pressing
or NUMBER keys, and press SET.
B.TRACK No.
C
D
A
B
Go directly to a preset track number.
•Select “TRACK”, and press SET.
• Change the No. by pressing
or NUMBER keys, and press SET.
C.Disc currently being played
The type of disc currently inserted is displayed.
D.Elapsed playing time
The screen may be changed by selecting the elapsed time.
•Select the elapsed playing time (“xx:xx:xx”), and press SET.
•Change the elapsed time by pressing NUMBER keys.
Enter time starting with seconds.
If the time entered is not on the disc, the entry will have no effect.
Re-enter the correct time.
e.g., press 0 ➛ 1 ➛ 2 ➛ 3 ➛ 4 ➛ 5 ➛ SET for “01 : 23 : 45”.
press 3 ➛ 0 ➛ SET for “00 : 00 : 30”.
•This function does not work with some discs.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation using On-Screen Displays (continued)
2
3
■ Disc information screen (for CD)
1
1. TRACK No.
Go directly to a preset track number.
•Select “TRACK”, and press SET*.
• Change the No. by pressing
or NUMBER keys, and press SET.
2. Disc currently being played
The type of disc currently inserted is displayed.
3. Elapsed playing time
B
C
A
■ Disc information screen (for DVD-RAM)
A.Direct Navigation (PROGRAM) or PLAY LIST No.
Go directly to a preset title number.
•Select “PROGRAM” or “PLAY LIST”, and press SET.
• Change the No. by pressing
or NUMBER keys, and press SET.
Direct Navigation
(PROGRAM)
B.Disc currently being played
The type of disc currently inserted is displayed.
B
C
A
C.Elapsed playing time
The screen may be changed by selecting the elapsed time.
•Select the elapsed playing time (“xx:xx:xx”), and press SET.
•Change the elapsed time by pressing NUMBER keys.
Enter time starting with seconds.
If the time entered is not on the disc, the entry will have no effect.
Re-enter the correct time.
PLAY LIST
e.g., press 0 ➛ 1 ➛ 2 ➛ 3 ➛ 4 ➛ 5 ➛ SET for “01 : 23 : 45”.
press 3 ➛ 0 ➛ SET for “00 : 00 : 30”.
•This function does not work with some discs.
• When
appears on the screen while a button is being operated, it means that the
Note
corresponding operation is prohibited by DECK or the disc.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
■ DECK information screen (for DECK)
1
2
1. Operating mode
The current operation is displayed.
2. Repeat Play mode (see p. 48)
Repeat play mode can be selected.
• Select “REPEAT”, and press SET.
• Change the desired mode during play by pressing
, and press SET.
Repeat Play mode
TITLE
GROUP
DVD-Video
DVD-Audio
CHAPTER
TRACK
OFF (NORMAL)
OFF (NORMAL)
OFF (NORMAL)
DVD-RAM (PROGRAM) PROGRAM DISC
(PLAY LIST) PLAY LIST
TRACK
ALL PLAY LIST OFF (NORMAL)
DISC OFF (NORMAL)
CD
3. Play mode [CD only] (See p. 39, 40.)
When Play mode is set (p. 39, 40), the mode name is displayed.
PROGRAM PLAY program play
RANDOM PLAY
----
random play
normal play
3
• For repeat play in VCR mode, see p. 31.
Note
NUMBER
keys
SELECT
SET
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation using On-Screen Displays (continued)
For your reference
Repeat Play mode example (see p. 47)
• CHAPTER/TITLE REPEAT PLAY (DVD-Video)
CURRENT PLAYBACK POSITION
POWER
OPEN/
CLOSE
TITLE
chapter
chapter chapter
CHAPTER REPEAT
TITLE REPEAT
NORMAL PLAY
NUMBER
keys
• TRACK/GROUP REPEAT PLAY (DVD-Audio)
CURRENT PLAYBACK POSITION
ACTION
SELECT
GROUP
track
GROUP
track
track
track
track
track
TRACK REPEAT
GROUP REPEAT
NORMAL PLAY
SET
PLAY
STOP
SKIP+
SKIP
FF
• TRACK/DISC REPEAT PLAY (CD)
-
CURRENT PLAYBACK POSITION
REW
track
track
track
PAUSE
TRACK REPEAT
DISC REPEAT
NORMAL PLAY
• PROGRAM/DISC REPEAT PLAY (DVD-RAM [PROGRAM])
CURRENT PLAYBACK POSITION
PROGRAM PROGRAM
PROGRAM PROGRAM
PROGRAM
PROGRAM
PROGRAM REPEAT
DISC REPEAT
NORMAL PLAY
• PLAY LIST/ALL PLAY LIST REPEAT PLAY (DVD-RAM [PLAY LIST])
CURRENT PLAYBACK POSITION
PLAY LIST PLAY LIST
PLAY LIST PLAY LIST
PLAY LIST
PLAY LIST
PLAY LIST REPEAT
ALL PLAY LIST REPEAT
NORMAL PLAY
• For repeat play in VCR mode, see p. 31.
Note
Important: if a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
*
48
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEG Playback Operation
This unit can play MP3/WMA/JPEG format CD-R
MP3/WMA Playback
or CD-RW recorded for personal use on a PC, etc.
Some discs may not play due to the condition of
the recording.
Do steps 1~3 at left.
Press
to select an MP3/WMA file ( / ).
Press POWER* on the remote or DECK.
a
b
(During STOP mode)
1
2
Press OPEN/CLOSE,
then place an MP3/WMA/JPEG disc into
the disc tray.
Press OPEN/CLOSE to close.
• MP3/WMA/JPEG MENU is displayed.
• Playback starts automatically
(except JPEG files).
Press SET or PLAY to start playback.
■ Forward/Reverse Search
Press FF/SLOW+ or REW/SLOW- during play.
Press PLAY to release.
• Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
3
■ Forward/Reverse Track Skip
• CD directory is displayed.
<Example>
Press SKIP+
| or SKIP- |
during play.
Function
Each press skips a track.
STOP
Status
• If pressed within first 3 seconds of playback,
skips to the previous track. If over 3 seconds,
Parent
folder
ROOT
. .
VA
END
DD CUB I C
CTURNE
NORN
_WALTZ
TECHNO
POPS
_
Folder area
(Current folder
appears green.)
returns to top of track. (SKIP- |
• Put DECK in Stop mode before performing
folder/file selection (see step 4.)
only.)
NO
J
AZZ
File area
(Selected file/
folder is
PLAY MODE :
NORMAL
■ Pause
highlighted.
Titles are
displayed
up to 11
characters.)
Press PAUSE during play.
PLAY MODE
:WMA file
Press PLAY to release.
:MP3 file
:Folder
Press STOP to stop play.
c
d
:Parent folder
Press OPEN/CLOSE to eject the disc.
The MP3/WMA/JPEG MENU is closed
automatically.
:JPEG file
<Example>
(Diagram left shows CD directory
structure as displayed in example
OSD above.)
ROOT
Note
VA
• Copyright protected files and files
containing errors cannot be played
back. The DECK skips to the next file.
END
DD_CUB I C
CTURNE
RN
_WALTZ
Notes
N
NO
O
• Only File (not Folder) area
operation is possible.
• Files are displayed in the
following order:
TECHNO
POPS
■ Select PLAY MODE [MP3/WMA Playback]
(!...0,1....9,A,B......Z).
J
AZZ
(During STOP mode)
Press
to select the desired PLAY
• Select file (During STOP mode)
1)Press to select an MP3/WMA file (
➡ MP3/WMA Playback (see right)
2)Press to select a JPEG file ( ).
➡ JPEG Playback (see p. 50)
3)Press SKIP+ | (next) or SKIP- |
MODE (see below).
/
).
4
[PLAY MODE]
NORMAL:
All MP3/WMA files are selected and
played back one time only.
(previous) to skip a file/folder page (7 files)
in the File area.
• Select folder (During STOP mode)
SINGLE REPEAT:
The selected MP3/WMA file is played
back repeatedly.
1)Press
to select a folder ( ).
FOLDER REPEAT:
2)Press SET to display files/folders contained
in the folder.
• Select parent folder (During STOP mode)
The MP3/WMA files contained in the
selected folder are played back
repeatedly. However, folders below the
selected folder are not played back.
1)Press
to select a folder ( ).
2)Press SET to make changes to the previous
directory display.
DISC REPEAT:
All MP3/WMA files are played back
repeatedly.
Press ACTION to return the DVD MAIN
5 MENU. (➛ Press ACTION again to return
49
to the MP3/WMA/JPEG MENU.)
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA/JPEGPlaybackOperation(continued)
■ Select PLAY MODE [JPEG Slide-show]
JPEG Playback
(During STOP mode)
Press
to select the desired PLAY MODE
You can play back JPEG images.
(See below).
Displayable Image Size: 32x32~7680x7680 pixels
[PLAY MODE]
• Some JPEG format may not be played
back.
Note
NORMAL:
All JPEG files are selected and
played back one time only.
Do steps 1~3 on page 49.
Press
to select a JPEG file ( ).
SINGLE REPEAT:
The selected JPEG file is played back
repeatedly.
1
2
Press SET or PLAY.
Selected JPEG file is displayed.
[JPEG Playback Screen]
FOLDER REPEAT:
The JPEG files contained in the
selected folder are played back
repeatedly. However, folders below the
selected folder are not played back.
DISC REPEAT:
All JPEG files are played back
repeatedly.
<Example>
■ Returned on the MP3/WMA/JPEG MENU
➡ Press STOP. (See p. 49)
■ Next/Previous Search
➡ Press SKIP+
| or SKIP- |
.
■ Start Slide-show ➡ Press FF/SLOW+ or
REW/SLOW-. (below)
■ Enlarging an image ➡ Press ZOOM. (P. 51)
■ Rotating an image ➡ Press ANGLE. (P. 51)
Press STOP to return to the MP3/WMA/
JPEG MENU.
3
JPEG Slide-show
(During JPEG Playback.)
<Example>
Operation can be done when files are in
order, such as in the diagram below.
JPEG files are displayed automatically
(about every 3 seconds) as a slide-show.
Press FF/SLOW+ or REW/SLOW-.
ROOT
1
<Example>
REW/SLOW-
01 PIC
FF/SLOW+
Image changes every 3 seconds.
AAA
DDD
TTT
UUU
VVV
WWW
■ Cancel slide show
➡ Press STOP to return the MP3/WMA/
JPEG MENU. (See p. 49)
■ Still picture
➡ Press STILL (only SLIDE).
➡ Press PLAY to release.
REW/SLOW-
ZZZ
FF/SLOW+
■ Forward/Reverse File Skip
➡ Press SKIP+
| or SKIP- |
.
Each press skips a file.
Press ACTION to return to
the DVD MAIN MENU.
2
50
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG Zoom
(During JPEG Playback.)
You can enlarge specific portions of a JPEG picture
and select the zoom ratio using the ZOOM button
on the remote during JPEG Playback screen.
Set Zoom size.
Press ZOOM repeatedly to change display as
follows.
➡ Press STOP to return the MP3/WMA/JPEG MENU.
• You can enlarge the center portion of the image
to one of 2 magnifications.
SELECT
SET
• Operation can be done during Rotation (below).
ACTION
STOP
X 1.0 (ORIGINAL)
X 1.5 (ZOOM 1)
X 2.0 (ZOOM 2)
1st press
2nd press
FF/
SLOW+
3rd press
PLAY
SKIP+
■ Use the
,
,
and
buttons to move the
REW/
SLOW-
position up, down, left and right.
(Position cannot be changed on X1.0
ORIGINAL images.)
SKIP
-
STILL
ZOOM
ANGLE
JPEG Rotation
(During JPEG Playback.)
You can rotate a JPEG picture using the ANGLE
button on the remote during JPEG Playback
screen. (The JPEG picture will be rotated 90 °
clockwise.)
Set rotation.
Press ANGLE repeatedly to change display
as below.
➡ Press STOP to return the MP3/WMA/JPEG MENU.
• Operation can be done during Zoom (above).
• The vertical/horizontal ratio of rotated JPEG
images may vary when they are displayed.
1st press
2nd press
3rd press
4th press
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and
Thomson multimedia.
Windows Media, and the Windows logo are trademarks, or registered
trademarks of Microsoft Corporation in the United States and/or other countries.
WMA is a compression format developed by Microsoft Corporation. It achieves
the same sound quality as MP3 with a file size that is smaller than that of MP3.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for DVD Operation
Once initial settings are done, they
Press ACTION*
remain in memory (even after power is
turned off) until changed. This means
DECK will operate under the same
conditions (especially DVDs) each time.
1
2
to display DVD MAIN MENU.
DVD MAIN MENU
Press
to select an item, and
press SET.
DISC LANGUAGES
AUDIO OUTPUT
ST I LL MODE
TV MODE
:
AUTO
: 4 : 3 P a n & S c a n
Ready Checklist
PROGRESSIVE OUT: OFF
DECK is in DVD mode, press DVD.
SELECT
SET
END
:
: SET
: ACTION
DISC LANGUAGES (See below)
All languages offered on the disc can be set.
If a language not offered is set, the original disc
language will be selected.
NUMBER
keys
AUDIO OUTPUT (See p. 53.)
You can set the audio output that comes from the
digital audio output terminal.
ACTION
SELECT
STILL MODE (See p. 54.)
To select “FIELD” (Field still) or “FRAME” (Frame
still) to prevent jitter or make small text or fine
patterns clearly visible in a still picture.
When “AUTO” is set, “FIELD” or “FRAME” is
selected automatically.
SET
TV MODE (See p. 54.)
“AUDIO” selections
To select whether the video material for a wide-
screen will be played back in the Pan & Scan style,
Letterbox style or 16 : 9 style.
(Factory preset: English)
To select the audio soundtrack language.
English/Spanish/French/Japanese
Original: Original disc language
OTHER 0000: Other language selection*1
Disc Languages (DVD only)
“SUBTITLE” selections
(Factory preset: AUTO)
To select and set the language of the audio
soundtrack, subtitles, or title/DVD menus for all discs
to be played.
To select the subtitle language.
AUTO: Same language selected
for “AUDIO”
• If language set for “AUDIO” is used in
playback, subtitles will not appear.
• If another language is used during
playback, the subtitles will appear
in the language selected at “AUDIO”
setup.
DVD MAIN MENU
Press
DISC LANGUAGES
to select
3
4
AUDIO OUTPUT
ST I LL MODE
TV MODE
:
AUTO
: 4 : 3 P a n & S c a n
“DISC LANGUAGES,”
and
press SET
to display screen.
PROGRESSIVE OUT: OFF
SELECT
SET
:
: SET
English/Spanish/French/Japanese
END
: ACTION
OTHER 0000: Other language selection*1
“MENUS” selections
DISC LANGUAGES
: E n g l i s h
(factory preset: English)
Press
AUDIO
To select the language used in title
menus or DVD menus.
to select an item, and
press SET repeatedly
for desired language.
(Please refer right.)
SUBT I TLE : AUTO
MENUS
: E n g l i s h
English/Spanish/French/Japanese
OTHER 0000: Other language selection*1
SELECT
SET
END
:
: SET
: ACTION
To enter OTHER ✱✱✱✱ code number,
Press NUMBER keys (Please refer to
language codes on p. 56).
Press ACTION to redisplay DVD MAIN
MENU and go to step 2 to setup another
item.
To make corrections, press
repeatedly
to delete language code number, and
correct.
5
*1 If the selected language is not offered,
the original disc language is selected.
Or, press ACTION twice to exit.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Audio Output (DVD only)
Select the digital output to be output from the optical
digital audio output connector of DECK.
Ready Checklist
DECK is in DVD mode, press DVD.
Recommended setting
Type of amplifier
to be connected
Press ACTION
Dolby
Digital
LPCM
(DVD)
to display DVD MAIN MENU.
1
DTS
No amplifier is connected
DVD MAIN MENU
Press
AV amplifier (with digital
audio input connector)
withoutDolbyDigital/DTS
decoder
DISC LANGUAGES
to select
2
AUDIO OUTPUT
ST I LL MODE
TV MODE
:
AUTO
PCM
PCM*1
PCM*1
PCM
: 4 : 3 P a n & S c a n
“AUDIO OUTPUT,”
and
press SET
to display screen.
PROGRESSIVE OUT: OFF
AVamplifierincluding
Dolby Digital decoder
SELECT
:
Bitstream
Bitstream
PCM
PCM
SET
: SET
END
: ACTION
AVamplifierincluding
DolbyDigital/DTSdecoder
2
*
Bitstream
AUDIO OUTPUT
Press
to select an item,
and
LPCM(DVD)
: OFF
• Make settings according to amplifier
connected to optical audio output as
shown in above table.
3
D o l b y D i g i t a l : B i t s t r e a m
d t s
: B i t s t r e a m
: OFF
DRC
press SET
repeatedly for
output. (See below.)
*1 When connecting an amplifier (with an
optical digital input connector) which
does not contain the Dolby Digital or
DTS decoder, be sure to select
SELECT
SET
END
:
: SET
: ACTION
■ “LPCM (DVD)” selections
OFF: Linear PCM of less than 44.1 or 48 kHz/16 bit
is output. When playing DVDs recorded in
linear PCM of over 44.1 or 48 kHz/20 bit, no
digital audio is output. (Factory preset)
PCM: When playing DVDs recorded in linear PCM of
44.1 or 48 kHz/20 bit/24 bit or more, digital
audio converted to 44.1 kHz/16 bit or 48 kHz/
16 bit is output.
“PCM”. If “Bitstream” is selected,
starting DVD play may cause such a
high level of noise as to be harmful to
your ears and damage the speakers.
*2 When a dts decoder is connected,
please select “Bitstream” in “dts.”
If “PCM” is selected, there will be
stereo sound.
(Digital output of PCM audio is restricted to
48 kHz/16 bit or below for copyright
protection.)
When a Dolby Digital decoder is
connected, please select “Bitstream”
in “Dolby Digital.”
If “PCM” is selected, there will be
stereo sound.
■ “Dolby Digital”selections
Bitstream: Dolby Digital bitstream (1 ch - 5.1 ch)
is output. (Factory preset)
PCM: When you have connected an amplifier that
doesn’t have a built-in Dolby Digital decoder.
■ “dts” selections
Bitstream: DTS bitstream is output. (Factory preset)
PCM: When you have connected an amplifier that
doesn’t have a built-in DTS decoder.
■ “DRC (Dynamic Range Compression)”
selections
OFF: Normal audio range is selected. (Factory preset)
ON: For dynamic sound even at low volume,
this is useful for late-night listening.
[Dolby Digital DVDs only].
Press ACTION to redisplay DVD MAIN
MENU and go to step 2 to setup another
item.
4
Or, press ACTION twice to exit.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for DVD Operation (continued)
Still Mode (DVD only)
Set to reduce jitter in a displayed still picture or a motion
picture.
Press ACTION*
1
2
to display DVD MAIN MENU.
DVD MAIN MENU
Press
to select “STILL MODE,”
and
press SET repeatedly
for mode. (See below.)
DISC LANGUAGES
AUDIO OUTPUT
ST I LL MODE
TV MODE
:
AUTO
: 4 : 3 P a n & S c a n
PROGRESSIVE OUT: OFF
SELECT
SET
END
:
: SET
ACTION
SELECT
: ACTION
AUTO: “FIELD” (Field still) or “FRAME” (Frame still) is
automatically selected during the still mode.
(Factory preset)
SET
FIELD: “FIELD” (Field still) is always selected.
This setting will reduce jitter when compared
with “AUTO” on some discs.
FRAME:“FRAME” (Frame still) is always selected.
Some texts and fine patterns will be seen clearly
when compared with “AUTO” on some discs.
Press ACTION
3 to exit this mode.
TV Mode (DVD only)
Set the screen display style for wide-screen video
material playback.
Press ACTION
to display DVD MAIN MENU.
1
2
Example
DVD MAIN MENU
Press
DISC LANGUAGES
to select “TV MODE,”
and press SET
repeatedly for mode.
(See below.)
• Pan & Scan (Factory preset)
AUDIO OUTPUT
ST I LL MODE
TV MODE
:
AUTO
: 4 : 3 P a n & S c a n
PROGRESSIVE OUT: OFF
SELECT
SET
END
:
: SET
: ACTION
4:3 Pan & Scan (Factory preset) :
Wide-screen video data is played in Pan & Scan
style (left and right of screen is trimmed.)
• Video data not formatted in Pan & Scan will play
in letterbox style.
• Letterbox
4:3 Letterbox :
Wide-screen video data is played in Letterbox
style (top and bottom of screen has black margin).
16:9 :
Set “16:9” when using Wide-screen TV.
Press ACTION
3
54
to exit this mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Notes
PROGRESSIVE OUT
• If the television is not progressive
compatible, a progressive scan picture is
not available. Connect the Video Output or
S-Video Output connector (see p. 12, 13)
and set PROGRESSIVE OUT to “OFF”.
• CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION
Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
Press ACTION
1
2
to display DVD MAIN MENU.
DVD MAIN MENU
TELEVISION SETS ARE FULLY
Press
“PROGRESSIVE OUT,”
and
press SET repeatedly
for mode. (See below.)
to select
DISC LANGUAGES
AUDIO OUTPUT
COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE
OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED
TO SET PROGRESSIVE OUT TO “OFF”.
IF THERE ARE QUESTIONS
REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL
525p DVD/VCR DECK, PLEASE
ST I LL MODE
TV MODE
:
AUTO
: 4 : 3 P a n & S c a n
PROGRESSIVE OUT: OFF
SELECT
SET
END
:
: SET
: ACTION
OFF:
ON:
Progressive scan signal is not output.
Progressive scan signal is output from the
Component Video Output Connector.
CONTACT OUR CUSTOMER SERVICE
CENTER.
Press ACTION
3 to exit this mode.
A/V OPTIMIZER
ACTION
SELECT
You can set to preset audio/video effects as desired.
NORMAL
Press A/V OPTIMIZER
in Play mode to display
SET
1
the A/V OPTIMIZER
selection on-screen.
• Display disappears after
5 seconds.
CINEMA
Press A/V OPTIMIZER
to select the desired
2
A/V
OPTIMIZER
mode below.
NORMAL
CINEMA
DRAMA
ACTION
The video/audio effect of each mode is listed below.
Mode
Video
Standard video
Audio
NORMAL
Standard audio
Enhances high/low range for
dynamic sound.
Reduces high/low range so dialog
and vocals can be heard clearly.
Bright areas are subdued.
CINEMA
DRAMA
ACTION
Standard video
Brightness and sharpness are
enhanced.
Enhances high/low range for
dynamic sound.
Note
• With some discs, the audio/video effect may not be obtained, also the audio/video
effects may not work well.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or
“MENUS” (see p. 52).
Code Language
6565 Afar
Code Language
7079 Faroese
7082 French
7089 Frisian
7165 Irish
Code Language
7678 Lingala
Code Language
8375 Slovak
6566 Abkhazian
6570 Afrikaans
6577 Ameharic
6582 Arabic
7679 Laothian
7684 Lithuanian
8376 Slovenian
8377 Samoan
7686 Latvian, Lettish 8378 Shona
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7771 Malagasy
7773 Maori
8379 Somali
8381 Albanian
8382 Serbian
8385 Sundanese
8386 Swedish
8387 Swahili
8465 Tamil
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7783 Malay
7273 Hindi
7282 Croatian
7285 Hungarian
8469 Telugu
8471 Tajik
6678 Bengali;Bangla 7289 Armenian
7784 Maltese
7789 Burmese
7865 Nauru
6679 Tibetan
6682 Breton
6765 Catalan
6779 Corsican
6783 Czech
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
7869 Nepali
7876 Dutch
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7879 Norwegian
7982 Oriya
8065 Panjabi
8076 Polish
8487 Twi
8083 Pashto, Pushto 8575 Ukrainian
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Romanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8582 Urdu
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fiji
8590 Uzbek
8673 Vietnamese
8679 Volapük
8779 Wolof
8872 Xhosa
8979 Yoruba
8372 Serbo-Croatian 9072 Chinese
8373 Singhalese 9085 Zulu
7665 Latin
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Instruction Displays
These displays will alert you to a missed operation or provide further instructions.
Page
OSD
Caution
If you attempt to set or review a Timer
Recording and the Clock is not set...
PLEASE SET CLOCK BY
PRESSING ACTION KEY
24
If the DECK is not in Stop mode, or cassette is
not inserted, or cassette has no record tab, or
tape is at its end 2 minutes before a Timer
Recording is about to begin...
PLEASE PREPARE
FOR TIMER REC
24
25
CHECK CASSETTE
RECORD TAB
If you press REC on the remote control or DECK,
and a cassette is inserted with no record tab...
6
If you press PLAY, FF, REW, or REC on the
remote control or DECK without a cassette
inserted...
20
21
NO CASSETTE
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPROX 3 SEC
If you press STOP or POWER during a Timer
Recording...
(visible in VCR mode only)
25
VIDEO HEADS MAY
NEED CLEANING
If head cleaning becomes necessary while
playing back a tape...
PLEASE INSERTHEAD
CLEANING CASSETTE
OR REFER TO MANUAL
4
END
: PLAY
If you press a function button other than STOP/
EJECT or POWER while DECK is
in VCR Lock mode...
VCR LOCK ACTIVATED
32
If you press an invalid key on the remote while
in TV mode...
REMOTE CONTROL IS SET
TO TV MODE
USE VCR : VCR KEY
USE DVD : DVD KEY
28
29
34
PLEASE CHECK THE DISC,
AND FOR STAINS OR
SCRATCHES ON DISC
If you press PLAY, and DECK reads data from
a stained or scratched disc in DVD mode.
6
3
Playback of a disc with different region number
was attempted. Only discs marked region “1”,
“ALL”, or those that include “1” are playable on
this DECK.
THIS DISC MAY NOT BE PLAYED
IN YOUR REGION
THIS TYPE OF DISC CANNOT BE
PLAYED. PLEASE INSERT A
DIFFERENT DISC
An unusable disc is inserted in the unit, or the
disc is not installed with label side up.
6
This file format cannot be played.
CANNOT PLAY THIS FILE
49
49
(Appears during MP3/WMA/JPEG file playback)
This file is copyright protected and cannot be
played back. (Playback is prohibited.)
(WMA only)
THIS FILE IS PROTECTED
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Requesting Service
Check the following points if you are having trouble with your DECK.
Power
No power…
Solution
• Completely insert Power Plug into an AC outlet.
• Press POWER button on.
• Make sure power source is active.
• Auto power-off (shutoff) occurs after about 5 min.
in DVD mode with no operation, or if there is no
broadcast signal in TV or Playback mode.
Turn the power back on. (pp. 23, 33)
Power turns itself off...
Solution
Recording & Playback
TV program cannot be recorded...
• Check connections between DECK, external
antenna, and TV.
• Check channel selections.
• Make sure your antenna system (CABLE or TV) is
correctly set. (Channels [p. 18])
• Make sure cassette record tab is intact. (p. 6)
• Confirm that clock is set to current time and date.
• Make sure Cable/DSS box (if used) is left on and
tuned to channel to be recorded.
Timer recording cannot be
performed…
• Set recording start/stop times correctly. (p. 24)
• Timer recording may not be performed or continued
if a power interruption occurs before or during a
Timer Recording, even after power is restored.
• Select channel 3 or 4 on TV to match VCR output
channel (3 or 4) (p. 16) or select LINE.
• Set VCR/TV selector to “VCR.”
There is no playback picture, or the
playback picture is noisy or contains
streaks...
• Adjust TRACKING control in either direction. (p. 4)
• Try Head Cleaning. (p. 4)
• Set TV’s Vertical Hold Control to MANUAL, then
adjust.
During special effects playback
picture may contain some vertical
jitter when using a TV with an
Automatic Vertical Hold Control...
• Make sure DECK power is on.
• Check Remote batteries.
DECK cannot be controlled...
• Make sure VCR LOCK is set to off. (p. 32)
• Make sure Remote is in proper mode. (p. 28)
• Make sure Timer Recording is not in progress.
Remote Control
Solution
DECK cannot be remote controlled...
• Make sure DECK power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control directly at remote sensor on DECK. (p.9)
• Avoid any object blocking signal path.
• Check Remote batteries. (p. 4)
• Exposing DECK remote sensor to direct fluorescent
or outdoor light may cause signal interference.
• PROG functions are not available in COMPONENT
Video Output and S-VIDEO OUT. Set TV to either RF
IN or VIDEO IN. (p. 10)
PROG buttons do not respond...
• Check Remote batteries. (p. 4)
• Press VCR or DVD button for DVD/VCR mode. (p. 28)
58
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/CD
Solution
Play fails to start even when PLAY is
pressed...
• This DECK cannot play discs other than DVDs and CDs.
• The disc may be dirty and require cleaning.
Picture is distorted during rapid
advance or rapid reverse...
• The picture will be somewhat distorted at times:
this is normal.
No Forward/Reverse Scene Search
play...
• Some discs may have sections which prohibit
Forward/Reverse Scene Search. (p. 23)
Audio soundtrack and/or subtitle
language is not the one selected at
the initial settings...
• If the audio soundtrack and/or subtitle language
selected at DVD initial settings does not exist
on the disc, it will not be accessible.
No subtitles...
• Subtitles appear only when available on disc.
• “OFF” is selected at the changing subtitle language.
Select “ON” at the “Subtitle Languages” section
(p. 36) to display the subtitles.
Alternative audio soundtrack
(or subtitle) language cannot be
selected...
• Alternative language cannot be selected with discs
which do not contain more than one language.
• For some discs, alternative language cannot be
selected with the AUDIO or SUB TITLE button.
Try selecting it from the DVD MAIN MENU if available.
Angle cannot be changed...
• This function is dependent on software availability.
Even if disc has multiple angles, they may be
recorded for specific scenes only (ANGLE indicator
on DECK lights up). (p. 37)
Solution
Miscellaneous
Programs cannot be viewed on TV...
• Make sure TV is tuned to VCR's output channel (3 or 4).
• Check connections between DECK,
external antenna, and TV.
• Set VCR/TV selector to “TV.” (p. 21)
• Make sure proper signal source is selected.
• If the television is not progressive compatible, a
progressive scan picture is not available.
Connect the Video Output or S-Video Output
connector (pp. 12, 13) and set PROGRESSIVE
OUT to “OFF” in the DVD Main Menu. (p. 55)
• Insert the cassette with window side up; record
tab facing you.
Video cassette cannot be inserted...
Video cassette ejects when
a recording is started or the power is
turned off for timer recording...
• Make sure cassette record tab is intact. (p. 6)
• To enable Quick play mechanism, the cylinder will
rotate for about 3 minutes. This reduces response
time from Stop to Play mode.
In Stop mode, the motor (CYLINDER)
continues to rotate...
• First, unplug DECK. Then, prepare a rigid wire
(e.g. an extended paper clip) and, applying
The disc cannot be removed..
moderate force, insert it straight into the hole at the
base of the tray. The tray will eject a little. Now, pull
the tray all the way out and remove the disc. (p. 9)
If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262).
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262).
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
PANASONIC CONSUMER ELECTRONICS COMPANY,
DIVISION OF MATSUSHITA ELECTRIC
CORPORATION OF AMERICA
One Panasonic Way
Secaucus, New Jersey 07094
PANASONIC SALES COMPANY,
DIVISION OF MATSUSHITA
ELECTRIC OF PUERTO RICO, INC.,
AVE. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park
Carolina, Puerto Rico 00985
Panasonic DVD/VCR Deck Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic
Consumer Electronics Company or Panasonic Sales Company (collectively referred to as “the warrantor”)
will, for the length of the period indicated on the chart below, which starts with the date of original purchase
(“Limited Warranty period”), at its option either (a) repair your product with new or refurbished parts, or (b)
replace it with a new or a refurbished product. The decision to repair or replace will be made by the
warrantor.
Product or Part Name
Parts
Labor
DVD/VCR Deck
One (1) Year
Ninety (90) Days
Rechargeable Batteries
(in exchange for defective item)
Ten (10) Days
Not Applicable
During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” warranty
period, there will be no charge for parts. You must mail-in your product during the warranty period.
If non-rechargeable batteries are included, they are not warranted. This Limited Warranty only applies to
products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended
only to the original purchaser and only covers product purchased as new. A purchase receipt or other
proof of original purchase date is required for Limited Warranty service.
Mail-In Service
For assistance in the continental U.S.A. in obtaining repairs please ship the product to:
Panasonic Services Company
Customer Servicenter
Suite B
4900 George McVay Drive
McAllen, TX 78503
For assistance in Puerto Rico call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910.
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original
carton. Include a letter detailing the complaint and provide a day time phone number where you can be
reached.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE
REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHSE. CUSTOMER WILL BE CHARGED FOR THE
REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures
which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-
up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or commercial use (such as hotel, office, restaurant, or other business), rental use of the product, or
service by anyone other than a Factory Servicenter or other Authorized Servicer, or damage that is attributable to
acts of God.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY
COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove
or re-install an installed unit if applicable, travel to and from the servicer, loss of or damage to media or
images, data or other recorded content. The items listed are not exclusive, but are for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on
how long an implied Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights which vary from
state to state. If a problem with this product develops during or after the Limited Warranty period, you may
contact your dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the
warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest Dealer or
Servicenter; purchase Parts and Accessories; or make Customer Service and
Literature requests by visiting our Web Site at:
or, contact us via the web at:
You may also contact us directly at:
1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855
Accessory Purchases
Purchase Parts, Accessories and Instruction Books online for all Panasonic
Products by visiting our Web Site at:
or, send your request by E-mail to:
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY : 1-866-605-1277
Service in Puerto Rico
Matsushita Electric of Puerto Rico, Inc. Panasonic Sales Company
Factory Servicenter:
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
Phone (787)750-4300 Fax (787)768-2910
As of October 2003
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Medidas de seguridad y precauciones importantes
PARA REDUCIR EL RIESGO DE GOLPES ELÉCTRICOS, INCENDIOS, HERIDAS O DAÑOS A
ESTE PRODUCTO, LEA Y GUARDE TODAS LAS INSTRUCCIONES DE SEGURIDAD Y
FUNCIONAMIENTO. TENGA EN CUENTA TODAS LAS ADVERTENCIAS INDICADAS EN EL
MANUAL Y EN EL PRODUCTO.
INSTALACIÓN
INSTALACIÓN DE LA ANTENA EXTERIOR
1
CONEXIÓN SEGURA DE LA ANTENA Y DE LOS CABLES
1
2
PRECAUCIÓN CON LA FUENTE DE ALIMENTACIÓN
El equipo solo debe hacerse funcionar desde una fuente de a
limentación que se indique en la unidad o en este manual.
Si fuera necesario, haga revisar la fuente de alimentación de
su hogar por parte de la Compañia de Suministro Eléctrico
o por parte de su Distribuidor de Productos de Vídeo.
Si se conectara una antena exterior o sistema de cable conectado al equido, el
CÓDIGOO ELÉCTRICO
usuario deberá asegurarse de que la antena o el
NEC-NATIONAL
BAJADA DE ANTENA
sistema de cable disponen de toma a tierra
EMPALMADOR
DE CONEXIÓN
como forma de proporcinar protección contra
A
TIERRA
UNIDAD DE DESCARGA
DELA ANTENA (SECCIÓN
S10-20 DEL NEC)
la acumulación de cargas estábicas y saltos
de corrientes. La sección 810 del Código
Eléctrico Nacional, ANSI/NFPA 70 (en
Canadá, la parte 1 del Código Eléctrico
EQUIPO DE
SERVICIO
CONDUCTORES CONEXIÓN
ELÉCTRICO
A
TIERRA (SECCIÓN
S10-20 DEL NEC)
EMPALMADOR DE
CONECTOR POLARIZADO O CON TOMA A TIERRA
Como característica de seguridad, este producto de vídeo
viene equipado con un enchufe de cable de alimentación
polarizado (solo una pata es más ancha que la otra), o con
un enchufe del tipo con toma a tierra de tres patas.
CONEXIÓN
A
TIERRA
SISTEMA DE ELECTRODOS DE
CONEXIÓN TIERRA DEL SERVICIO
ELÉCTRICO (ART, 250 DEL NEC, PARTE H)
A
Canadiense) proporciona información con respecto a la
conexión a tierra correcta del mástil y la estructura de soporte, conexión a
tierra de los cables de bajada de antena a una unidad de descarga, tamaño de
los conductores a tierra, ubicación de la unidad de descarga de antena,
conexión de los electrodos a tierra y requisitos del electrodo de toma a tierra.
MANTENGA LA ANTENA LIBRE DE LÍNEAS O CIRCUITOS DE ALTO VOLTAJE
Un sistema de antena exterior deberá ser colocado bien alejado de líneas de
alimentación, luz eléctrica o circuitos de alimentación para que nunca esté en
contacto con tales fuentes de alimentación si se cayera. Al instalar una antena
exterior, debe tenerse muchísimo cuidado para evitar las líneas de alimentación,
circuitos u otras fuentes de alimentación ya que esto podría resultar mortal.
Debido a los riesgos implicados en la instalación de una antena, tal operación
debe dejarse a un profesional.
PRECAUCIÓN CON EL ENCHUFE POLARIZADO
Este enchufe sólo entrará en la toma en un sentido.
Si no pudiera introducir el enchufe a fondo, intente darle la
vuelta. Si aún así no entrara, llame a un técnico electricista
para que le instale una toma de red adecuada. No desactive
esta función de seguridad manipulando el enchufe de ninguna
manera.
2
PRECAUCIÓN CON ENCHUFES CON TOMA A TIERRA
Este enchufe sólo entrará en una toma con conexión a tierra de
tres orificios. Si fuera necesario, que un técnico electricista le
instale la toma de red adecuada. No desactive esta función de
seguridad manipulando el enchufe de ninguna manera.
UTILIZACIÓN DE LA UNIDAD DE VÍDEO
Si la unidad ha estado almacenada o es trasladada a una nueva ubicación, remítase
primero a la sección de INSTALACIÓN de estas medidas de seguridad.
1
3
CABLE DE ALIMENTACIÓN
MANTENGA ESTA UNIDAD DE VÍDEO ALEJADA DEL AGUA O DE
HUMEDAD DE CUALQUIER TIPO
Asegúrese de que los cables de alimentación son dispuestos
de tal forma que no se apoye nada sobre ellos, no ruede
nada sobre ellos, o que estén en el paso de tráfico al
caminar. Si se utilizara un cable alargador, asegúrese de
que también disponga de un enchufe polarizado o con toma
a tierra y de que puede conectarse firmemente. Los cables
pelados, los enchufes averiados o hilos quebrados
constituyen un peligro y deben ser reemplazados por un
técnico cualificado del servicio técnico. Las tomas eléctricas
de la red general sobrecargadas y los cables de extensión
constituyen riesgos de incendio y han de evitarse en lo
posible.
2
SI EL EQUIPO ES EXPUESTO A LA LLUVIA, HUMEDAD, O FUERTES
IMPACTOS, desenchufe la unidad y que sea revisada por un técnico cualificado
antes de volver a utilizarla.
3
4
DURANTE UNA TORMENTA ELÉCTRICA
Durante una tormenta con rayos, tanto en interiores como en el exterior, o antes de
dejar la unidad sin utilizar durante largos períodos de tiempo, desconecte todos los
equipos de la fuente de alimentación así como la antena y el sistema de cableado.
AL ENCHUFAR LA UNIDAD
•No exponga nunca la unidad a la lluvia o el agua. NO LA HAGA FUNCIONAR
si se ha derramado líquido dentro de la unidad. Desenchufe la unida
inmediatamente ya que sea revisada por un técnico. Pueden producirse
incendios o sacudidas eléctricas derivadas de cortocircuitos eléctricos
causados por el contacto de líquidos con el interior de la unidad.
•No deje caer ni introduzca ningún objeto por las aberturas de la unidad. Algunas
piezas internas tienen un voltaje peligroso y el contacto con ellas puede producir
sacudidas eléctricas o incendios.
4
5
NO BLOQUEE LOS ORIFICIOS DE VENTILACIÓN
Las aberturas de ventilación del mueble liberan el calor
generado durante el funcionamiento de la unidad. Si se
bloquearan, el calor acumulado dentro de la unidad podría
ocasionar fallos que pueden llevar a riesgos de incendio o
daños por calor en las cassettes utilizadas.
•Evite colocar la unidad directamente encima o debajo del televisor, ya que esto
prodría causar interferencias eléctricas. Mantenga cualquier tipo de imán
alejados de equipos electrónicos.
EVITE UBICACIONES MUY CALIENTES O SOMETIDA
A CAMBIOS BRUSCOS DE TEMPERATURA
5
6
UTILIZACIÓN DE ACCESORIOS
Utilice sólo accesorios recomendados por el fabricante para así evitar riesgos de
incendio, sacudidas eléctricas y otros peligros.
No coloque la unidad encima o cerca de cual quier tipo de
calefactor o regulador, bajo la luz solar directa, dentro de
vehículos, etc… No traslade la unidad súbitamente entre
sitios con variaciones extremas de temparatura. Si la unidad
es llevada bruscamente de un sitio frío a otro cálido, la
humedad puede condensarse en la unidad y en la cinta.
LIMPIEZA DE LA UNIDAD
Desenchufe la unidad. Luego utilice un paño limpio y seco, sin tratamiento
químico para quitar suavemente el polvo o suciedad. NO UTILICE productos de
limpieza, aerosoles, o aire comprimido que pudieran causar un exceso de
pulverización o introducirse en la unidad y ocasionar sacudidas eléctricas.
Caulquier substancia, como cera, cinta adhesiva, etc., podría arruinar el acabado
de la superficie. La exposición a substancias grasosas, áreas húmedas o
polvorientas puede afectar de manera adversa a las piezas intemas.
6
PARA EVITAR LESIONES PERSONALES
• No coloque equipos no fijados en superficies inclinadas.
• No coloque esta unidad sobre ningún soporte que no esté
firme, nivelado y que sea adecuadamente
fuerte. La unidad podría caerse y
SERVICIO
1
EL USUARIO NO DEBE REALIZAR NINGUNA OPERACIÓN DE
SERVICIO TÉCNICO POR SÍ MISMO
Si, después de observar atentamente las detalladas instrucciones de
funcionamiento, este producto de vídeo no funcionara correctamente, no intente
abrir o extraer las tapas, o realizar cualquier ajuste no indicado en este manual.
Desenchufe la unidad y llévela a un técnico cualificado de servicio técnico.
SI FUERAN NECESARIAS PIEZAS DE RECAMBIO
Asegúrese de que el técnico de servicio utiliza sólo piezas especificadas
por el fabricante, o de las mismas características que las piezas originales.
La utilización de subsitutos no autorizados puede ser causa de incendios,
sacudidas eléctricas, u otros peligros.
QUE EL TÉCNICO DE SERVICIO TÉCNICO REALICE UNA
COMPROBACIÓN DE SEGURIDAD
producir graves lesiones a niños o
adultos y dañarse la unidad misma.
• La combinación de aparato y carrito
debe moverse con cuidado. Las paradas
súbitas, una fuerza excesiva ya las
superficies irregulares pueden ocasionar el vuelco de la
combinación de aparato y carrito.
2
3
• Siga atentamente las instrucciones de funcionamiento y
utilice los accesorios recomendados por el fabricante al
hacer funcionar esta unidad o al conectaria a otros
equipos.
Después de cualquier servicio o reparación de la unidad, solicite al técnico de
servicio que realice una completa comprobación de seguridad tal como se
describe en la literatura de servicio técnico del fabricante para asegurarse así
que la unidad de vídeo se encuentra en condiciones de funcionamiento seguras.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUCIONES DE SEGURIDAD
PARA PREVENIR INCENDIOS O CHOQUES ELÉCTRICOS NO
EXPONGA ESTE APARATO A LA LLUVIA O LA HUMEDAD.
PARA PREVENIR CHOQUES ELÉCTRICOS, ASEGURASE QUE LA
CLAVIJA HAGA JUEGO CON EL ENCHUFE Y CONÉCTELO
COMPLETAMENTE.
Este símbolo advierte al usuario de que hay voltaje sin
PRECAUCION
aislamiento dentro de la unidad de suficiente magnitud
como para ocasionar sacudidas eléctricas. Por lo
tanto, resultará peligroso realizar cualquier tipo de
contacto con toda pieza interna de la unidad.
PELIGRO DE DESCARGA
ELECTRICA NO ABRIR
PRECAUCION: PARA EVITAR LA POSIBILIDAD DE
UNA DESCARGA ELECTRICA NO DESMONTAR LA
CUBIERTA (O LA PARTE TRASERA). ESTE APARATO
NO PUEDE SER REPARADO POR EL PROPIETARIO.
PARA CUALQUIER TRABAJO DE SERVICIO SE
DEBE RECURRIR A UN TECNICO ESPECIALIZADO.
Este símbolo alerta al usuario de que se ha incluido
importante literatura sobre el funcionamiento y
mantenimiento de esta unidad. Por tanto, debe leerse
atentamente tal literatura a fin de evitar cualquier
problema.
Advertencia FCC: Cualquier cambio o modificación no autorizado de este
equipo anulará la autorización al usuario para hacer
funcionar la unidad.
FCC Warning: Any unauthorized changes or modifications to this
equipment would void the user’s authority to operate.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Spanish Quick Use Guide/ Guía para rápida consulta
CONEXIONES/CONFIGURACION INICIAL (READYTO PLAY)
Realice la conexión de la antena o TV por cable antes de enchufar el cable de CA.
El DVD/VCR iniciará automáticamente la fijación de los canales y del reloj al enchufar el cable de CA.
CONEXIONES
Para Ant/Cable ➛ DVD/VCR ➛ TV
DVD/VCR
Terminal IN FROM ANT.
Televisor
Entrada (IN) desde
1
Conecte el cable de la antena al terminal IN
ANT./CABLE
1
FROM ANT del DVD/VCR.
Terminal
OUT TO TV
Conecte el terminal OUT TO TV del DVD/VCR
a la entrada de la antena VHF/UHF del TV con
el cable RF incluido.
2
2
VHF/UHF
Para Sistema Digital de Satelite (DSS)/ Convertidor de cable ➛ DVD/VCR ➛ TV
Terminal
Conecte la salida de convertidor de cable
al terminal IN FROM ANT.
Televisor
1
IN FROM ANT. Estuche convertidor
de TV por cable
DVD/VCR
Conecte el terminal OUT TO TV del DVD/VCR
a la entrada de la antena VHF/UHF del TV con
el cable RF incluido.
2
Entrada (IN) desde
ANT./CABLE
Terminal
1
2 OUT TO TV
VHF/UHF
CONFIGURACION INICIAL
Encienda el TV y cambie al canal 3.
1
Enchufe el cable de CA.
2
Al usar cables coaxiales RF del tipo “tuerca”,
apriételos solamente con los dedos. Un apriete
excesivo puede dañar los terminales.
El DVD/VCR se encenderá e iniciará las
fijaciones de los canales y del reloj.
•
•
Si no aparece la pantalla de abajo, compruebe
la conexión del DVD/VCR-TV y si el canal del
TV está a 3, intennte cambiando al canal 4.
Para cambiar el canal de salida del DVD/VCR,
consulte las instrucciones de “Canal de salida
del VCR” (informaciones en inglés página 19).
Las fijaciones se realizan automáticamente.
3
Cuando termina las fijaciones, aparecerá la
siguiente pantalla.
Enchufe el cable de CA.
Al inicio, el idioma de la
Si aparece en la pantalla “AUTO CLOCK SET IS
INCOMPLETE (FIJACION AUTOMATICA DEL
RELOJ ES INCOMPLETO)”, Ajuste el reloj
como se describe a continuación.
AUTO CLOCK SET
CH AUTO SET PROCEEDING
pantalla está fijado a
inglés.
CANCEL : STOP
Para cambiar el idioma,
seleccione la pantalla
MENU (informaciones en
AUTO CLOCK SET
IS
I
NCOMPLETE
inglés página 18).
PROCEEDING
PLEASE SET CLOCK BY
PRESSING ACT ON KEY
I
CANCEL : STOP
Si está usanndo un convertidor de TV por cable y
en su area hay un canal de Public Broadcast
Station (PBS), ajuste su convertidor al canal PBS
de su area. Si está usando un receptor DSS, este
debe estar apagado.
AJUSTE MANUAL DEL RELOJ
Si la fijación ha sido incompleta.
Presione la tecla ACTION en el control remoto
1
para visualizar la pantalla del menú SET
Nota
CLOCK.
SET
CLOCK
• Los botones de funciones no funcionan durante
1 / 1/2004 THU--1
-
2:00PM
DST:
-----------------------
ON
la configuración inicial.
• Para retirar un cassette durante el ajuste
automático, presione EJECT en el control remoto
o STOP dos veces en el aparato. En este caso,
los ajustes de los canales y la hora se deben
hacer manualmente. Para los ajustes seleccione
la pantalla MENU (informaciones en inglés
página 18).
• Dependiendo de las condiciones, el ajuste
automático puede durar más de 30 minutos.
En ese caso, presione STOP para detener el
ajuste automático y realice los ajustes
manualmente en la pantalla MENU.
Presione
para seleccionar el mes y SET
2
para ajustar. De la misma forma, seleccione y
ajuste la fecha, año, hora y DST (hora de
verano).
SET
CLOCK
6 /20/2004 SUN
-
-15:30PM
DST:
-----------------------
ON
Presione dos veces la tecla ACTION para
poner el RELOJ en marcha y salir.
3
P
a
r
a
s
o
licita
r
ay
u
d
a
,
p
o
r
f
av
o
r
l
la
m
e
a
l:
1
-
8
00
-
2
1
1-
PA
N
A
(7
2
6
2
)
o
c
o
n
s
ú
lt
e
n
os
a
t
r
avés
d
e
p
ág
i
n
a
w
eb
e
n
:h
ttp: /
/w
w
w
.p
anasonic.com/contactinfo
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Operaciones básicas para la reproducción
Programación fácil para la
grabación con temporizador
Inserte un cassette,
1 • La alimentación del DECK se activa. Si Auto
Presione PROG
para visualizar la pantalla de Programacion.
VCR/TV (consulte la página 32) está en
“INACT (OFF)”, presione VCR/TV en el
control remoto para el modo VCR.
1
2
P FE INIC PARADA CA VEL
1) Presion
.
2 Presione PLAY para reproducir el cassette.
1
2
3
4
-- --
-- --
-- --
-- --
:
:
:
:
-- --
-- --
-- --
-- --
:-- -- --
:-- -- --
:-- -- --
:-- -- --
2) Para ajustar la FECHA de
grabación, presione
para seleccionar:
• Si el cassette no tiene la lengüeta de
prevención de grabación (página 6), se
inicia la reproducción automáticamente.
ELEGIR
:
FIJAR : SET
1-31 = una vez, o
Detalles especiales durante la grabación
TERMINAR: PROG
DIARIO = a la misma hora
de lunes a viernes, o
SEMANA = a la misma
hora cada semana.
Presione FF/SLOW+ o REW/SLOW- para
búsqueda de escenas hacia delante/ hacia
atrás. Presione PLAY para liberar.
Durante la búsqueda, cada vez que
presione FF o REW se cambia la velocidad:
Presione PAUSE/STILL para imagen Fija
(Congelada).
Orden para elegir
Ejemplo
2
8
9
6
1
31
/
Orden para elegir
DIARIO
7
Fecha de hoy
SEMANAL
SA
SEMANAL
LU
SEMANAL
DO
Presione PLAY para liberar.
(
)
(
)
(
)
Presione PAUSE/STILL en el modo de
imagen fija para imágenes cuadro a cuadro.
Presione PLAY para liberar.
Presione FF/SLOW+ o REW/SLOW- en el
modo de imagen fija para cambiar la
velocidad de las imágenes a cámara lenta.
3) Ajustes los ítems restantes,
presione SET para ajustar los tiempos de
INICIO/PARADA, CANAL o entrada de LINEA
(página 35), y la velocidad de la cinta (SP, SLP).
Luego presione
para seleccionar.
Presione PROG para finalizar PROGRAM.
Presione STOP para detener el cassette.
3
Rebobinado/Avance rápido
Presione REW/SLOW- o FF/SLOW+ en el
modo de parada para rebobinado/avance
rápido del cassette.
P FE INIC PARADA CA VEL
Presione
3
1 13
2
:00p
3:20p 02 SLP
2
3
4
-- --:-- --:-- -- -- para seleccionar un número
-- --:-- --:-- -- --
-- --:-- --:-- -- --
que no está usando para
ingresar mas programas y
presione SET
para ajustar.
FIJACION ES COMPLETO
CANCELAR : ADD/DLT
• Rebobina una cinta T-120 en
aproximadamente 1 minuto.
ELEGIR
:
FIJAR:SET
TERMINAR: PROG
Presione EJECT en el control remoto,
o STOP/EJECT en el DECK para expulsar
el cassette.
Luego repita el paso 2.
O
Presione nuevamente
PROG para salir.
Operaciones básicas para la grabación
Inserte el cassette con lengüeta de
1
protección de grabación (página 6).
• La alimentación del DECK se activa. Si Auto
VCR/TV (consulte la página 32) está en
“INACT (OFF)”, presione VCR/TV en el
control remoto para el modo VCR.
Presione CH
/
, o las teclas de números
2
3
para seleccionar el canal.
Grabación de un toque
Presione REC repetidamente para ajustar la
hora de grabación (30 min - 4 horas).
Presione SPEED para seleccionar la
velocidad de grabación (página 6)
• SP = Reproducción normal
• SLP = Reproducción extra larga
• La videograbadora termina la grabación
a una hora programada.
4 Presione REC para comenzar a grabar.
• Para eliminar escenas indeseadas, presione
PAUSE/STILL para hacer una pausa, y al
presionar nuevamente continua la grabación.
• No podrá ver otro canal durante la
grabación.
Grabación normal
4:00 3:00
0:30
2:00
1:00
1:30
Presione STOP para detener la grabación.
5
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Spanish Quick Use Guide/ Guía para rápida consulta
Funcionnamiento del DVD utilizando
visualizaciones en pantalla
Operaciones básicas del DVD
Presione POWER en el control remoto o el
1 aparato.
Cuando se presiona DISPLAY, la visualización en
pantalla muestra la información del disco (título /
capítulo / número de lista, tiempo transcurrido de
reproducción, audio / idioma del subtítulo, y ángulo)
e información (repetir la reproducción, modo
reproducción, Karaoke vocal encendido / apagado,
etc.).
Presione DVD para seleccionar el modo DVD.
2
1) Presione OPEN/CLOSE.
3 2) Ponga un disco en la bandeja de disco.
• Sujete el disco sin tocar ninguna de sus
superficies, póngalo con el lado donde esté
impreso el título hacia arriba, alinéelo con las
guías y póngalo en su posición apropiada.
Disco de 3” (8 cm) / Disco de 5” (12 cm)
Presione DISPLAY en el modo reproducción
1 o parada para visualizar las visualizaciones en
pantalla.
• Cada vez que se presione DISPLAY, la
visualización en pantalla cambia como se
muestra a continuación.
Presione PLAY para iniciar la reproducción.
4
La bandeja del disco se cierra
automáticamente.
• Si está usando un DVD interactivo y aparece el
menú de títulos (TITLE MENU), siga al paso 5.
Información seleccionada del disco
Información seleccionada del DECK
Pantalla normal
Presione
o las teclas numéricas para
5
seleccionar el artículo deseado.
Presione SET o PLAY para la reproducción.
Si usa las teclas numéricas, la
reproducción comienza automáticamente.
Presione
(o
) para seleccionar el ítem
2 deseado.
Presione STOP para parar la reproducción.
6
7
Presione SET para ajustar.
Presione OPEN/CLOSE para expulsar el disco.
Presione
para seleccionar el ajuste
3 deseado.
Presione SET para ajustar.
Para volver a la pantalla normal,
Presione repetidamente CLEAR o DISPLAY.
■Para buscar una escena particular
Búsqueda hacia adelante
Presione FF/SLOW+ en el modo de reproducción.
Búsqueda hacia atrás
Presione REW/SLOW- en el modo de reproducción.
(Para liberar, presione PLAY)
<Ejemplo (Vídeo DVD)>
T I TULO
:
12
DVD
00 : 12 : 34
T I TULO
:
12
DVD
00 : 12 : 34
CAPITULO: 11
CAPITULO: 24
■Para saltar un capítulo o una pista
Salto hacia adelante
Presione SKIP
Salto hacia atrás
l en el modo de reproducción.
ELEGIR :
ELEGIR : 0
-
9
FIJAR : SET SIGUIENTE: DISPLAY
FIJAR : SET SIGUIENTE: DISPLAY
Presione l
SKIP en el modo de reproducción.
■Para ver una imagen fija
<Ejemplo (DVD-RAM)>
Presione PAUSE/STILL durante la reproducción.
(Para liberar, presione PLAY)
T I TULO
:
12
DVD
00 : 12 : 34
T I TULO
:
12
DVD
00 : 12 : 34
CAPITULO: 11
CAPITULO: 24
■Para ver imágenes cuadro a cuadro (DVD)
Presione PAUSE/STILL en el modo de imagen fija.
La imagen avanza un cuadro cada vez que
presiona la tecla. (Para volver a la
ELEGIR :
ELEGIR :
FIJAR : SET SIGUIENTE: DISPLAY
FIJAR : SET SIGUIENTE: DISPLAY
reproducción normal, presione PLAY)
<Ejemplo (Audio DVD)>
■Para ver en cámara lenta (DVD)
Presione FF/SLOW+ o REW/SLOW- en el modo
de imagen fija.
GRUPO
P I STA
:
:
1
1
DVD-AUDIO
00 : 12 : 34
GRUPO
P I STA
:
:
1
1
DVD-AUDIO
00 : 12 : 34
(Para liberar, presione PLAY)
ELEGIR :
FIJAR : SET TERMINAR: DISPLAY
ENTRAR: 0-9
FIJAR : SET TERMINAR: DISPLAY
P
a
r
a
s
o
licita
r
ay
u
d
a
,
p
o
r
f
av
o
r
l
la
m
e
a
l:
1
-
8
00
-
2
1
1-
PA
N
A
(7
2
6
2
)
o
c
o
n
s
ú
lt
e
n
os
a
t
r
avés
d
e
p
ág
i
n
a
w
eb
e
n
:h
ttp: /
/w
w
w
.p
anasonic.com/contactinfo
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Fijaciones iniciales
Selección de IDIOMAS DEL
DISCO [DVD solamente]
Seleccione “AUDIO”
(Fijación de fábrica : inglés)
Inglés / Español / Francés / Japonés :
Presione DVD para seleccionar el modo DVD.
1
Presione ACTION en el modo de parada para
2 visualizar MENU.
Original :
Se seleccionará el idioma
original de cada disco.
Presione
para seleccionar el artículo deseado.
3 Presione SET.
OTRO 0000 : Se puede seleccionar el
IDIOMAS DEL DISCO
otro idioma.
Todos los idiomas ofrecidos en el disco pueden ser
ajustados. Si el idioma ajustado no es ofrecido en el
disco, se seleccionará el idioma original del disco.
SALIDA DE AUDIO
Seleccione “SUBTITULO”
AUTO : Se seleccionará el mismo que fue
seleccionado en la preparación de
“AUDIO”. (Fijación de fábrica)
• Si el idioma seleccionado en la
preparación de “AUDIO” se utiliza durante
la reproducción, los subtítulos no
aparecerán.
Puede usted ajustar la salida audio procedente del
terminal de salida audio digital.
DETENER RASTREO
Para seleccionar “CAMPO”, “CUADRO” o “AUTO”
para prevenir inestabilidad o para permitir ver textos
pequeños o patrones finos claramente en el modo de
imagen fija.
• Si se utiliza otro idioma durante la
reproducción, los subtítulos aparecerán
en el idioma seleccionado en la
preparación de “AUDIO”
Inglés / Español / Francés / Japonés :
OTRO 0000 : Se puede seleccionar el
otro idioma.
TV PREFERENCIA
Para seleccionar cuando el material del vídeo es
para pantalla ancha y se quiere reproducir en el
estilo Pan&Scan, en el estilo Letterbox o en el estilo
16:9 en la pantalla.
Seleccione “MENU”
(Fijación de fábrica : inglés)
Inglés / Español / Francés / Japonés :
OTRO 0000 : Se puede seleccionar el
otro idioma.
Presione
para seleccionar el artículo deseado.
4 Presione SET.
Volver a visualizar el menú de DVD para
5 continuar el ajuste.
Presione ACTION y pase al paso 3 para ajustar otro
ajuste o, para salir, presione ACTION dos veces.
Cambio del idioma de subtítulos
[Vídeo DVD solamente]
Visión desde otro ángulo
[DVD solamente]
Algunos discos DVD tienen escenas que
han sido filmadas simultáneamente desde
ángulos diferentes.
Con estos discos, la misma escena podrá
verse desde cada uno de estos ángulos
diferentes utilizando el botón ANGLE.
EI idioma de los subtítulos seleccionado al hacer
las fijaciones iniciales se puede cambiar por otro
idioma diferente, si éste se encuentra disponible.
Presione SUBTITLE durante
1
la reproducción.
Cuando no haya subtítulos
grabados, se visualizará “-”
en lugar del número de
idioma.
ANGULO: 1
Presione ANGLE
1
durante la
ELEGIR : SUB TITLE
reproducción para
visualizar la selección
ELEGIR : ANGLE
del ángulo.
Presione SUB TITLE,
las teclas numéricas para
seleccionar el idioma
deseado.
o
2
ANGULO: 2
Presione ANGLE
2
repetidamente o
ELEGIR : SUB TITLE
para seleccionar el
ángulo deseado.
ELEGIR : ANGLE
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Spanish Quick Use Guide/ Guía para rápida consulta
Cambio del idioma de la pista
de sonido [DVD solamente]
Selección de vocal para los
discos de Karaoke [DVD solamente]
EI idioma de la pista de sonido seleccionado al
hacer las fijaciones iniciales se puede cambiar por
otro idioma diferente, si éste se encuentra
disponible.
Presione AUDIO durante la reproducción
1 para visualizar la pantalla AUDIO.
Presione
para
2
Presione AUDIO durante la
reproducción para visualizar
SONIDO en la pantalla.
seleccionar VOZ y
presione AUDIO o
1
para
seleccionar tal como se
indica a continuación.
ELEGIR
: AUDIO/
ELEGIR
: AUDIO
• DVD Karaoke (1 vocal) VOZ ACTIVO VOZ INACTIVO
• DVD Karaoke (2 vocals) VOZ V1 VOZ V2 VOZ V1+V2 VOZ INACTIVO
Presione AUDIO,
teclas numéricas para
seleccionar el idioma
deseado.
o las
2
ELEGIR
: AUDIO
Utilización de un menú de títulos
[DVD solamente]
Utilización de un menú de DVD
[DVD solamente]
Algunos discos con películas, vienen con dos o
más títulos. Por ejemplo, si el disco tiene un menú
de títulos grabados, el botón TITLE podrá
Algunos discos DVD ofrecen un menú especial.
Este menú incluye guías para contenidos únicos,
audio, subtitulos, idiomas, etc.
Aunque los contenidos y las operaciones se
cambian, los siguientes son unos pasos básicos
para el uso del menú.
utilizarse para seleccionar el título de la película.
Presione TITLE durante la reproducción.
Ahora se visualiza una lista de los títulos del
disco.
1
Presione MENU durante la reproducción.
1
El menú de DVD introducido en el disco se
visualiza ahora.
Presione
o las
TITLE MENU
2
teclas de números para
seleccionar el título
deseado.
Dogs Castles
Presione
o las
DVD MENU
2
LDogs
teclas de números para
seleccionar el ítem deseado.
Presione SET o PLAY
para elegir.
1 . SUBTITLE
2 . AUDIO
Presione SET o PLAY
para elegir.
of the world
3 . ANGLE
<ejemplo>
<ejemplo>
Ampliación de la imagen [DVD solamente]
Durante la reproducción de un DVD, puede ampliar
partes específicas de una imagen y seleccionar la
relación de zoom usando el botón ZOOM.
2da
Presione ZOOM repetidamente para cambiar el
tamaño de la imagen como se indica a continuación:
3da
■ Use los botones
,
,
y
para desplazar
la posición hacia arriba, hacia abajo, hacia
la izquierda o hacia la derecha.
P
a
r
a
s
o
licita
r
ay
u
d
a
,
p
o
r
f
av
o
r
l
la
m
e
a
l:
1
-
8
00
-
2
1
1-
PA
N
A
(7
2
6
2
)
o
c
o
n
s
ú
lt
e
n
os
a
t
r
avés
d
e
p
ág
i
n
a
w
eb
e
n
:h
ttp: /
/w
w
w
.p
anasonic.com/contactinfo
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Funcionamiento de la ejecución de MP3/WMA/JPEG
■ Ejecución MP3/WMA/JPEG (Durante el
Puede utilizar esta unidad para reproducir audio
de formato MP3/WMA/JPEG, grabado para uso
personal con una computadora, etc., en un
CD-ROM o CD-RW. La ejecución no podrá
realizarse en algunos casos, debido a las
condiciones de la grabación.
4
modo STOP)
Presione
para seleccionar un archivo
) o un archivo JPEG ( ), y
MP3/WMA (
/
presione SET o PLAY.
• MP3/WMA
Búsqueda hacia adelante/hacia atrás
➡ Presione FF/SLOW+ o REW/SLOW-
durante la ejecución.
Presione POWER en el control remoto
1 o DECK.
Salto de pista hacia adelante/hacia atrás
Presione OPEN/CLOSE y a continuacion
➡ Presione SKIP+
durante la ejecución.
• JPEG
| o SKIP- |
2
coloque un disco MP3/WMA/JPEG en la bandeja
de discos.
Presione OPEN/CLOSE para cerrarla.
Búsqueda siguiente/anterior
➡Presione SKIP+ | o SKIP- |
Inicie la muestra-diapositiva
.
Se visualizará el MENU MP3/WMA/JPEG y la
3
➡Presione FF/SLOW+ o REW/SLOW-.
Ampliar una imagen ➡ Presione ZOOM.
Girar una imagen ➡ Presione ANGLE.
Presione STOP para detener la operación
descrita arriba.
ejecución se iniciará automáticamente.
(Se visualizará el directorio del CD.)
Estado de la
función
■ Seleccione MODO DE REPRODUCCION
<ejemplo>
REPROD
(Durante el modo STOP)
Carpeta
Presione
para seleccionar el MODO
principal
DE REPRODUCCIÓN deseado.
[MODO DE REPRODUCCIÓN]
NORMAL:
ROOT
VA
TECHNO
POPS
. .
END
DD CUB I C
CTURNE
RN
_WALTZ
Area de las
carpetas
(La carpeta
visualizada
actualmente
se volverá
verde)
_
N
O
Area de
archivos
(El archivo/
la carpeta
se visualiza
con un
J
AZZ
NO
Todos los archivos se reproducen sólo
una vez.
REPETICION DE UNA MUSIC:
El archivo seleccionado se reproduce
repetidamente.
REPETICION DE UN ARCHIVO:
Los archivos que se encuentran en la
carpeta seleccionada se reproducen
repetidamente.
MODE DE REPRODUCCION:
NORMAL
cursor.)
MODO DE REPRODUCCIÓN
REPETICION DEL DISCO:
Todos los archivos se reproducen
repetidamente.
:Archivo MP3
:Carpeta
:Archivo WMA
:Archivo JPEG
:Carpeta principal
Presione ACTION para regresar al
5 DVD MENU PRINCIPAL.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
DECK & VCR
A ACTION button ................................. 8, 18 P PLAY button (Playback a Tape) ...... 8, 20
Accessories............................................ 4
ADD/DELETE button
POWER button ....................................... 8
PROG button (PROGRAM).............. 8, 24
Program Clear, Review, Replace ....... 25
(Add or Delete a Channel) ............ 8, 19
Audio Broadcast types
(Stereo/SAP/Mono) ............................ 26
Audio Mode (Playback, Recording) .... 27
Auto Operation Functions.................... 31
Auto Shut-Off ........................................ 33
Q Quality Picture ....................................... 4
R REC button (Record on a Tape) ..... 8, 21
Record Tab ............................................ 6
Remote Sensor ...................................... 9
Remote Warning .................................. 34
Repeat Play ......................................... 31
Reset All Memory Functions ................. 9
REWIND/SLOW- button................... 8, 20
B Batteries ................................................. 4
Blue Light (ON/OFF Feature)........... 9, 32
C Channel (“SET UP CHANNEL”) .......... 18
Channel Up/Down,
S SAP/Hi-Fi ............................................. 27
SEARCH button ............................... 8, 30
Spanish Quick Use Guide ........... 62 ~ 69
Specifications......................................... 7
SPEED button .................................. 8, 21
Still (Freeze) Picture ............................ 20
STILL/PAUSE button (Still Picture) .. 8, 20
STOP button..................................... 8, 20
Tracking/V-Lock Button ....................4, 8
Clock (“SET CLOCK”).......................... 18
CM/ZERO SEARCH button ............. 8, 30
Commercial Skip ................................. 30
Connections................................. 12 ~ 15
Copy Your Tapes (Dubbing) ............... 35
COUNTER RESET button ............... 8, 30
Customer Services Directory............... 61
T Tape Position, Tape Status ................. 31
Tape Select .......................................... 31
Timer Recording .................................. 24
Trouble Shooting ........................... 58, 59
TV mode button................................ 8, 28
D DISPLAY button ............................... 8, 11
DST (Daylight Saving Time) ................ 19
E EJECT button ................................... 8, 20
ENTER button
(For tuning TV Channel) ................ 8, 28
V VCR Lock ............................................. 32
VCR mode button ............................ 8, 28
VCR/TV button ................................. 8, 21
VCR/TV Selection Feature .................. 32
VOLUME +/- button (TV Volume) .... 8, 28
F FAST FORWARD/SLOW+ button..... 8, 20
H Head Cleaning ...................................... 4
I Index Search ........................................ 30
Indicator (Multi Function Display) ....... 11
Initial Setup (Ready to Play) ......... 16, 17
INPUT button ................................... 8, 35
WWarning and Instruction Displays ....... 57
Weak Signal Display ........................... 33
L Limited Warranty ........................... 60, 61
Location of Controls
(Remote, DECK) .......................... 8 ~ 10
MMulti-Brand Control ....................... 28, 29
Multi Function Display (Front Display)
ON/OFF Feature................................... 34
O On-Screen Displays (VCR) ................. 11
One Touch Recording ......................... 21
70
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
A ACTION button ................................. 8, 52 R Random Play (For CD) ........................ 40
ANGLE button
(Multiple Angle Viewing) ......... 8, 37, 51
AUDIO button
(Audio Soundtrack Language) ...... 8, 36
Audio Output
(For Selecting Audio Output) ............. 53
Auto-Power Off Function ..................... 23
A/V OPTIMIZER.................................... 55
Repeat Play ................................... 47, 48
Resume Function................................. 23
RETURN button ............................... 8, 22
Rotation................................................ 51
S SKIP+ l or SKIP- l button
(Forward/Reverse Chapter/Track) 8, 23
Slide-show ........................................... 50
SLOW+/SLOW- button
B Bonus Group (For DVD-Audio) ........... 41
(Slow Motion Picture) .................... 8, 23
STILL/PAUSE button
(Still Picture or Pause) ................... 8, 23
Still Mode
(For selecting “FIELD” or “FRAME”) .. 54
STOP button..................................... 8, 22
SUB TITLE button
(For selecting Subtitle Language) ... 8, 36
S-Video Out.................................... 10, 13
C CLEAR button .................................. 8, 39
Component Video Output .............. 10, 13
D Direct Navigator ................................... 42
Disc Languages ................................... 52
DISPLAY button
(“On-Screen Display”).................... 8, 44
DTS ...................................................... 14
DVD-Audio ........................................... 41
DVD Menu ........................................... 38
DVD mode button ............................ 8, 28
DVD-RAM (DVD-VR) ........................... 42
T TITLE button (Title Menu) ................ 8, 38
TV Mode
(For selecting the screen display style) .. 54
V VOLUME ADJUST button ................ 8, 40
V.S.S. (Virtual Surround Sound) ..... 8, 23
F Frame by Frame Picture ...................... 23
Forward/Reverse Chapter/Track Skip... 23
Forward/Reverse Scene Search .......... 23 WWMA ..................................................... 49
J JPEG ............................................ 49 ~ 51 Z ZOOM button (Picture Zoom)..... 8, 37, 51
K Karaoke
(Vocal Selection for Karaoke Discs) ... 37
L Language Code List ............................ 56
MMENU button
(To display DVD Menu) ................. 8, 38
MP3 ...................................................... 49
Multiple Angle Viewing........................ 37
OOPEN/CLOSE button....................... 8, 22
Optical Digital Audio Output .......... 10, 15
P PAGE button (Still Image Skip) ....... 8, 41
PLAY button (Play a Disc) ............... 8, 22
Play List................................................ 43
Program Play (For CD) ........................ 39
Progressive Scan..................... 10, 13, 55
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park, Carolina,
Puerto Rico 00985
P
Printed in Indonesia
LSQT0797 A
S0104-1024
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|