EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
ADVARSEL!
CAUTION!
USYNLIG LASERSTRÅLNING VED ÅBNING NAR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNGDÅ UDSAETTELSE FOR STRÅLNING.
EN
Invisible laser radiation when open. Avoid exposure
to beam. Class 1 laser product. This system must be
opened only by qualified technicians to prevent acci-
dents caused by the laser beam.
VORSICHT!
UNSICHTBARE LASERSTRALUNG
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–
VERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM LASERSTRAHL AUSSETZEN!
LASER λ = 780nm, P max=5 mW
CAUTION
–
INVISIBLE LASER RADIATION
Rating Information : At the bottom of the unit.
This unit complies with the existing requirements.
WHEN OPEN AND INTERLOCKS FAILED OR
DEFEATED. AVOID EXPOSURE TO BEAM.
ATTENTION
–
RAYONNEMENT LASER INVISIBLE
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE
LA SECURITE EST NEUTRALISEE.
EXPOSITION DANGEREUSE AU FAISCEAU.
In accordance with the rating plate of the
unit, this unit current standards concern-
ing electrical safety and electromagnetic
compatibility.
Please respect the environment
Before throwing any batteries away, con-
sult your distributor who may be able to
take them back for specific recycling.
VARNING–
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.
BETRAKTA EJ STRÅLEN.
Have a Blast-Just Not in your eardrums
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
VARO!
AVAT TAESSA JA SOUJALUKITUS OHITETTAESSA
OLET ALTTIINA NÄKYMÄTTÖMÄLLE.
LASERSÄTEIL YLLE ÄLÄ KA TSO SÄTEESEEN.
only after headphone are in place.
CLASS
LASER KLASSE
APPAREIL A LASER DE CLASSE 1
LUOKAN LASERLAITE
KLASS LASERAPPARAT
1
LASER PRODUCT
1
1
1
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
T H E L I G H T N I N G
FLASH AND ARROW-
HEAD WITHIN THE
CAUTION: TO REDUCE THE THE EXCLAMATION
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
DO NOT REMOVE COVER T R I A N G L E I S
A
TRIANGLE IS
WA R N I N G S I G N
ALERTING YOU OF
D A
A
WARNING
SIGN
ALERTING YOU OF
T A T
( O R BAC K ) . N O U S E R -
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUA L I F I E D S E RV I C E
PERSONNEL.
I
M
P
O
R
N
"
N
G
E
R
O
U
S
I N S T R U C T I O N S
A C C O M PA N Y I N G
T H E P R O D U C T.
VOLTAGE" INSIDE
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
WARNING:TO PREVENT FIRE OR ELECTRICAL
DO NOT EXPOSETHIS PRODUCT
SHOCK HAZARD,
TO RAIN OR MOISTURE.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Safety Information
TECHNICAL SPECIFICATIONS:
Power supply
EN
AC 230V ~50Hz
Clock backup:9V
6F22
Power consumption: 7W
Please respect the environment. Before
throwing any batteries away, consult your
distributor who may be able to take them
back for specific recycling.
Do not place the system near wet areas such as
bathrooms and pool side.
Do not expose this appliance to rain or moisture
Avoid storing the system at humid places or near
abnormally heated areas.
Power is continuously supplied to the system. To
disconnect power completely, unplug the power
cord from the power outlet.
Do not expose this appliance to dripping and
splashing.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Before you begin
This clock radio is equipped with a memory
holding system that can be powered with
9V battery (not included). The power
failure protection circuit will not operate
unless battery is installed.
Power Failure Indicator
EN
When the AC power is interrupted
(disconnected) for a short period of time,
both time and alarm settings will change
(unless optional battery is installed). After
AC power is restored (reconnected), the
Digital Display will blink to indicate that
power was interrupted and you should
re-adjust the time and alarm settings.
When normal household power is
interrupted, or AC cord is unplugged, the
battery will power the clock radio to keep
track of time and alarm settings
programmed into the memory. When the
battery backup functions, the digital
display will not light, however, the
function of alarm still occurs during the
power interruption if remaining battery
power is adequate. Normal operation will
resume after AC power is restored so you
will not have to reset the time or the
alarm.
Install battery as below:
1. Remove battery compartment door (lo-
cated at the bottom of the radio) by ap-
plying thumb pressure to area indicated
on battery door and then lift the door out
and off the cabinet.
2. Connect a 9V battery to the connector
plug.
3. Insert battery in the compartment and
replace the compartment door.
The descriptions and characteristics in this owner’s manual are for the purpose of general
reference only and not as a guarantee. In order to provide you with the highest quality
product, we may make changes or modifications without prior notice. The English version serves
as the final reference on all product and operational details should any discrepancies arise in
other languages.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Operating the Clock
EN
Setting time:
Tip:
1. Press the SET button, the “ : “ will flash
No icon will be flashing if all
selectors are set, if you see any
icon flashing on display, press
the SET button repeatedly to confirm
everything is set correctly.
on the display .
2. Press REV
or FWD
to set the time.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Operating the Radio
EN
FM
MW
TUNING
MW / FM
Antennas
Tuning the Stations
MW antenna - A built-in ferrite rod
antenna eliminates the need for an out-
side antenna for MW reception. Rotating
the unit slightly may improve the recep-
tion of distant MW stations.
1. Press ON to turn on the radio.
2. Slide the MW/FM switch to the desired
broadcast band.
3. Turn the TUNING knob to select a
station.
4. Press OFF to turn off the radio.
FM antenna - The power cord acts as your
FM antenna. It picks up moderate to
strong stations and eliminates the need for
an external antenna in most strong signal
areas. Be sure the power cord is stretched
to its full length. Do not coil or bunch the
cord together. Changing position of the
power cord may improve reception.
Built-In AFC
The Built In Automatic Frequency Control
(AFC) works only on FM. It helps reducing
drift on FM reception and keeping the
radio locked in on the FM station to which
it is tuned.
When tuning in FM stations, you may
notice that the station you are tuning can
be well-tuned on two or three nearby
points on the dial. Always tune carefully
at the loudest and clearest point.
You may try to move the power cord in
order to improve the reception.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Operating the CD player
EN
Listening to compact disc
Selecting play mode
1. Lift to open the CD compartment door.
2. Insert a disc and close the door.
1. Start CD playback.
2. During playback, press CD MODE to
toggle between different play mode.
3. Press PLAY/PAUSE
4. Adjust volume to your desired level.
5. Press REV or FWD to skip back-
ward and forward.
.
- repeat the current track.
- repeat the whole disc.
6. Press STOP to stop CD playback.
- play tracks randomly.
- play random track repeatedly.
When there is no disc in the CD
compartment, “nd” will show on display.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Operating the Alarm
EN
Setting the WAKE Time
Waking by Selected Source
Your digital clock operates on a 24 hour
standard mechanism.
You may be woken up by ALARM
, RA-
DIO or CD
.
1. Press the SET button until ALARM 1 /
ALARM 2 icon is blinking.
1. Select an MW or FM station.
2. Set wake time (see above directions).
3. Press ALARM 2 or ALARM 1 to select
2. Press REV
or FWD
to set the wake
time. The time decrements or increments
will follow by a faster rate when you press
waking up by ALARM , RADIO
Corresponding indicator will be up
next to the selected setting.
or CD
.
and hold either REV
or FWD
.
3. After the ALARM time is set, press SET
repeatedly until no icon is blinking.
4. Adjust the volume by turning VOLUME.
You can select your CD wake track by the
following procedures.
Tip:
The unit equips with GRAD-U-
WAKE feature, the alarm tone
volume will increase gradually
to its maximum in about 30 to 45
seconds.
1. Press WAKE UP CD TRACK.
2. While pressing, press REV
to select your desired CD wake up track.
or FWD
Note:
When you turn off the alarm
by pressing OFF, the alarm
will turn on at the same time
tomorrow.
Tip:
If you set the SLEEP function
with low volume level before
going to bed, we advise using
ALARM mode to wake you up since its
volume will automatically increase.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Operating the Clock Radio
Stop the Nap alarm
Sleep Mode
EN
Press NAP or follow “Turning off Alarm”.
In sleep mode, the radio or CD will turn
off automatically. Simply:
1. Press and hold NAP to cancel the nap
setting.
2. Only alarm sound can be selected.
3. Nap alarm is equipped with GRAD-U-
WAKE feature.
1. Listen to CD or radio.
2. While holding SLEEP, press REV
FWD to set the sleep time. The time
range is from 1 minute to 2 hours.
or
3. Release SLEEP and the current time will
be shown again. The radio or CD will turn
off when the preset time elapses. If you
decide to turn off the radio or CD sooner,
press SNOOZE or OFF.
Turning off Alarm
Silence the alarm momentarily
Press SNOOZE. The alarm will sound again
when the snooze period is over.
4. When SLEEP is activated again, the sleep
time will be the same as the one you have
set before.
5. Press SLEEP to read the remaining sleep
time.
Stop the alarm
Press OFF. The alarm will sound on the
following day at the same time.
Disable the alarm permanently
1. Press CANCEL.
2. The ALARM indicator will be flashing.
3. Press ALARM 1 or ALARM 2 within 3
seconds to deactivate the corresponding
alarm function permanently.
Nap Mode
This function wakes you up after a short
period of time. Simply:
1. Press NAP and release. The
tor will flash. During this period, adjust
NAP time by pressing REV or FWD
The range is from 10 minutes to 2 hours.
2. The clock will be shown after 5 seconds
indica-
You can activate the previously set alarm
time by pressing ALARM 1 or ALARM 2.
.
if no button is pressed. The
will lit up.
indicator
3. Press NAP once to show time left.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Operating the Clock Radio
Snooze Alarm Operation
Seconds Time Display
EN
This operation allows extra sleep time
after the alarm is on. The alarm will turn
off by pressing SNOOZE until the snooze
period is over. Snooze function can be
used repeatedly up to 2 hours. After this,
the alarm will turn off until the next alarm
conditions are met. Set the “quiet” period
as follow:
The unit may display in seconds.
1. Press REV
onds display.
2. Release REV
or FWD
or FWD
to show sec-
to return
to the hour and minute display.
Brightness control
You can adjust the backlight by adjusting
the BRIGHTNESS switch at the back of
the unit, there are two modes you may
select from:
1. Press and hold SNOOZE.
2. Press REV
or FWD
to set the
“quiet” period (the default time is 9 min-
utes) from 1 minute to 30 minutes. Re-
lease the button, then the “quiet” period
is set.
High — Stronger Backlight.
Low — Weaker Backlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
|