DPL950-EN DVD new 5/7/03 10:10 AM Page 1
DVD Player
• Press STOP once to stop playback and go into resume
mode.
Basic Playback Features
1. Press SOURCE on the main unit until “DVD/CD” appears
on the display or DVD source key on the remote to select
DVD/CD input source.
memo
0
EN
PLAY
clear
REV
FWD
ESET +
modes
info
theater
stereo
OPEN/CLOSE
BAND/APP
RANDOM
SOURCE
BASS/TREBLE
RP
PAUSE
ZOOM
REC vcr
PHONES
delay
STOP
dvd
tv
SURROUND
tuner up
level
digital
MULTI PRODUCT
tape sat/cab
video
tuner
/ vcr
NOTE
RESUME MODE:
L
C
R
The next time PLAY is pressed, the unit will begin
playback at the location where it was last stopped.
Press STOP key again to cancel the resume mode.
LS LFE RS
2. Open disc tray for loading
discs with label side facing
up. Press again to close it.
VOLUM
Quick search
PHONES
1. While playing a disc, press REVERSE on the remote con-
trol to scan backwards through the disc. Press FORWARD
on the remote for scanning forward.
Press repeatedly to change searching speed to 1,2 or 3
times for VCD and 1,2,3 or 4 for DVD.
3. Press PLAY/PAUSE on the unit or PLAY on the remote
control to start playback
2. Press PLAY at any time to resume normal playback.
• Press PLAY/PAUSE on the unit or PAUSE to pause playing
during playback. Press PLAY/PAUSE on the main unit or
PLAY on the remote to resume normal playback.
memo
0
PLAY
clear
REV
FWD
7
8
0
9
PRESET +
memo
PLAY
clear
REV
FWD
PRESET +
PAUSE
PHONES
ZOOM
REC vcr
STOP
PHONES
PAUSE
ZOOM
REC vcr
STOP
Freeze frame, frame advance
• Press SKIP REVERSE to go back to the previous chapter
or SKIP FORWARD to move to the next chapter.
1. Press PAUSE on the remote control to freeze picture dur-
ing playback. Each time you press it again, the picture
advances one frame.
tuner down
tv
vcr/sat
menu
pr
return
2. Press PAUSE repeatedly to move forward in still frame.
PRESET -
PRESET +
PHONE
3. Press PLAY to resume normal playback.
pr
1
2
3
clear
REV
FWD
7
8
0
9
memo
PAUSE
PLAY
ZOOM
REC vcr
clear
Note: Remote control selector must be on DVD/CD position.
REV
FWD
STOP
MULTI PRODUCT
PAUSE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:10 AM Page 3
DVD Player
2. Press the UP/DOWN key to select the audio channel you
want, then press OK to confirm.
Selecting a title
EN
1. Refer to previous page “General use” to open the title
menu.
dvd
tv
tuner up
level
digital
tuner up
level
digital
tape sat/cab
video
tape sat/cab
video
tuner
/ vcr
2. Enter title number using the number keys on the remote
control. Add 0 in front of single-digit title number
(e.g. 9 = 09).
tuner
/ vcr
RDS
pty
hifi dvd/cd
RDS
pty
hifi dvd/cd
tuner down
tuner down
tv
vcr/sat
menu
return
tv
vcr/sat
menu
return
1
2
5
8
0
3
4
6
7
9
memo
PLAY
clear
REV
FWD
NOTE
NOTE
Some discs have one title only.
This feature only works if the disc was created with
multiple audio tracks.
Selecting a chapter
Selecting subtitle language
1. Refer to previous page “General use” to open the title
menu.
1. Refer to previous page “General use” to open the subti-
tle menu.
2. Enter chapter number using the number keys on the
remote control. Add 0 in front of single-digit chapter
number (e.g. 9 = 09)
2. Press the UP/DOWN key to select the audio channel you
want, then press OK to confirm.
pr
dvd
tv
dvd
tv
tuner up
level
digital
tuner up
1
2
5
8
0
3
level
digital
tape sat/cab
video
tape sat/cab
video
4
6
tuner
/ vcr
tuner
/ vcr
7
9
RDS
pty
hifi dvd/cd
RDS
pty
hifi dvd/cd
memo
tuner down
tuner down
PLAY
clear
REV
FWD
vcr/sat
return
tv
menu
tv
vcr/sat
menu
return
NoteL To exit the OSD banner, press the INFO key.
NOTE
The chapter feature will not work if the disc is not
formatted with separate chapters.
Selecting audio language
1. Refer to previous page “General use” to open the subti-
tle menu.
NOTE
This feature only works if the disc was created with
subtitles.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:10 AM Page 4
DVD Player
Selecting camera angle
Using bookmarks
1. Refer to page 20 “General use” to open the camera
angle menu.
The bookmark feature allows you to mark a point on the
disc that you can go to quickly. You can store up to 9
bookmarks.
2. Press the UP/DOWN key to select the audio channel you
want, then press OK to confirm.
Adding bookmarks
delay
tuner up
stereo
digital
dvd
tv
dvd
tv
1. Refer to Page 20 “General use” to open the bookmark
menu.
tuner up
level
digital
level
tape sat/cab
video
tape sat/cab
video
tuner
/ vcr
tuner
/ vcr
RDS
RDS
pty
hifi dvd/cd
pty
hifi dvd/cd
tuner down
tuner down
tv
vcr/sat
menu
return
tv
vcr/sat
menu
return
2. Use the arrows on the remote to move the cursor (yellow
frame) to the “Mark” check line, then press OK to add
bookmark when you reach the scene you want to do so.
NOTE
delay
tuner up
stereo
digital
dvd
tv
dvd
tv
tuner up
level
digital
level
This feature only works if the disc was created with
multiple angles.
tape sat/cab
video
tape sat/cab
video
tuner
/ vcr
tuner
/ vcr
RDS
RDS
pty
hifi dvd/cd
pty
hifi dvd/cd
tuner down
tuner down
tv
vcr/sat
menu
return
tv
vcr/sat
return
Selecting zoom ratio
3. To add another bookmark, move the cursor to the right
with arrow button and then press OK when you reach
another scene you want to do so.
1.Press ZOOM button on the remote to select the zoom
ratio.
PLAY
clear
REV
FWD
4. Move cursor to the door icon and then press OK
to exit menu.
PAUSE
ZOOM
REC vcr
STOP
Recalling bookmarks
MULTI PRODUCT
1. Refer to page 20 “General use” to open the bookmark
menu.
2. There are two zoom ratio available, press the zoom key
to access the following zoom sequence.
2. Use the arrows on the remote to move cursor (yellow
frame) to the “Go To” check line and to the bookmarked
scene you want to recall.
NORMAL > ZOOM 1 > ZOOM 2 > NORMAL
3. Press OK to recall bookmarked scene.
4. Move cursor by using the arrows to the door icon
and then press OK to exit menu.
Clearing bookmarks
The bookmarks are cleared each time a disc is removed
from the player or when the power is turned off
completely.
If all 9 bookmarks are in use, you can still mark new scenes
but the previous bookmarks will be erased starting from
the earliest one.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:10 AM Page 5
DVD Player
Play mode
2. The box under “Title” will be highlighted automatically.
EN
1. Refer to previous page “General use” to open the play-
OPEN/CLOSE
dvd
tv
info
tuner up
level
mode menu.
digital
delay
stereo
dvd
tv
tape sat/cab
video
tuner up
level
digital
2. Press the up/down buttons to select among :
Normal >Program edit/ Program play > Repeat AB >
Repeat Title > Repeat Chapter > Normal
tape sat/cab
tuner
/ vcr
RDS
video
pty
hifi dvd/cd
tuner / vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
3. Press OK to confirm setting.
tuner down
Use the arrows on the remote to select title and chapter.
modes
info
delay
tuner up
theater
stereo
stereo
digital
OPEN/CLOSE
dvd
tv
3. “Add” will be highlighted automatically after chapter is
selected. Press OK to add selected track and chapter(s) onto
playlist.
level
delay
dvd
tv
tape sat/cab
video
tuner up
level
digital
tape sat/cab
video
delay
stereo
tuner
/ vcr
dvd
tv
tuner up
level
digital
RDS
tuner
pty
/ vcr
hifi dvd/cd
tape sat/cab
video
tuner down
RDS
tuner
/ vcr
RDS
pty
hifi dvd/cd
NOTE
tuner down
Random playback is not available in DVD mode.
4. Move to highlight “Play” (start program playback) or
“Done” (return normal playback with program saved), then
press OK to start program playback or return to stop mode.
delay
stereo
delay
stereo
dvd
tv
dvd
tv
tuner up
level
tuner up
digital
level
Program playback
digital
tape sat/cab
video
tape sat/cab
video
Edit program
tuner
/ vcr
tuner
/ vcr
RDS
RDS
pty
hifi dvd/cd
pty
hifi dvd/cd
1. Refer to previous page “General use” to open the play-
mode menu, or press and hold PROGRAM button on the
main unit to enter program mode.
tuner down
tuner down
Note: Program mode can only be activated during STOP /
Resume mode.
NOTE
You can select at maximum 32 items by repeating
steps 2 - 3.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:11 AM Page 6
DVD Player
Delete program
4. Use the LEFT and DOWN arrows to highlight “Insert”
and then press OK.
1. Select the program menu from the OSD banner, or press
and hold the RPT/PROG. button on the main unit to display
program edit playlist.
OPEN/CLOSE
delay
tuner up
info
stereo
digital
dvd
tv
delay
stereo
level
dvd
tv
tuner up
level
digital
tape sat/cab
video
tape sat/cab
video
2. Use the arrows on the remote to select and highlight the
programmed item you want to delete on the playlist.
tuner
/ vcr
tuner
/ vcr
RDS
pty
hifi dvd/cd
OPEN/CLOSE
RDS
dvd
tv
info
pty
hifi dvd/cd
tuner down
tuner up
level
digital
delay
stereo
tuner down
dvd
tv
tape sat/cab
video
tuner up
level
digital
tape sat/cab
video
tuner
/ vcr
5. Use the arrow buttons to highlight “Play” (start program
playback) or “Done” (return to normal playback with pro-
gram saved) and then press OK.
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
tuner down
Cancel program
3. Highlight “Delete” and then press OK to delete item.
info
Program will be cancelled when;
1. disc tray is opened;
2. power is turned off;
delay
stereo
digital
dvd
tv
tuner up
level
tape sat/cab
video
3. STOP is pressed twice. The red PGM indicator will disap-
pear on display and player will resume normal playback
mode.
tuner
/ vcr
RDS
pty
hifi dvd/cd
TV OUT signal selection
4. Repeat steps 2 and 3 to delete additional items.
5. Use the arrows to select and highlight “Play” (start pro-
gram playback) or “Done” (return to normal playback with
program saved) and then press OK.
If you connect your receiver to a monitor set equipped with
a component input (using Y, Pr, Pb sockets), you must set
the unit to COMPONENT VIDEO OUT, you can choose to use
either the COMPONENT OUT or SCART output by the fol-
lowing procedures:
Insert chapter
1. Press and hold the BASS/TRE/TV OUT button for 3 sec-
onds.
1. Select the program menu from the OSD banner, or press
and hold the RPT/PROG. button on the main unit to display
program edit playlist.
SOURCE
BASS/TREBLE
TV OUT
RPT/PROG.
RROUND
2. “TV SYSTEM” will show on display.
3. Press again to select “TV RGB” and “TV COMPNT” (which
means Y, Pr, Pb).
4. Release button and wait for a few seconds to validate
your selection.
2. Use the UP or DOWN arrows to select and highlight item
on the playlist where you want to insert a chapter before
it.
Note: The blue led will light when RGB output is selected,
in YPrPb mode, the blue led will only light temporarily.
3. Use the LEFT and RIGHT arrows to select Title or
Chapter, then the UP and DOWN arrows to select the
number.
Setting on TV RGB enables a Composite (CVBS) and RGB
signal to be delivered to the SCART socket. However, this
will also disable any signal from S-VIDEO and YPrPB sock-
ets.)
If you set to TV COMPNT, video signal will be delivered in
both COMPONENT and S-VIDEO sockets. However, this will
also disable the signal from SCART socket.)
OPEN/CLOSE
dvd
tv
info
tuner up
level
digital
delay
stereo
dvd
tv
tape sat/cab
video
tuner up
level
digital
tape sat/cab
video
tuner
/ vcr
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
tuner down
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:11 AM Page 7
DVD Player
Audio language
Set up menu
EN
This step will define the default audio language. Choosing
an audio language from the on-screen banner display will
only overwrite this setting temporarily.
General use
1. Press MENU in STOP mode to display the set up menu on
screen. The menu shows current settings.
NOTE
NOTE
If language selected is not available on disc, the
language designated as default by each disc will
be selected..
if you press during disc playback, only the disc’s
own menu will be displayed.
1. Open audio language menu.
video
tuner
/ vcr
RDS
pty
hifi dvd/cd
tuner down
tv
vcr/sat
menu
pr
return
2. Use UP and DOWN arrows to select language and then
press OK.
For languages other than options available:
3. Press DOWN to select “Other” and then press OK.
2. Use arrow buttons to highlight options and press OK to
open selected menu.
4. Enter language code into boxes and then select OK to
return to main menu. Press OK on the remote.
dvd
tv
delay
tuner up
stereo
digital
tuner up
level
dvd
tv
digital
level
tape sat/cab
video
tape sat/cab
video
tuner
/ vcr
tuner
/ vcr
RDS
pty
hifi dvd/cd
RDS
pty
hifi dvd/cd
tuner down
tuner down
tv
vcr/sat
menu
return
3. Press LEFT arrow to go back to the previous menu or
press RETURN to exit the setup menu completely.
dvd
tv
tuner up
video
level
digital
tuner
/ vcr
tape sat/cab
video
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
tv
vcr/sat
menu
pr
return
RDS
pty
hifi dvd/cd
tuner down
tv
vcr/sat
menu
return
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:11 AM Page 8
DVD Player
Subtitle language
Menu language
This step will define the default subtitle language.
Choosing a subtitle language from the on-screen banner
display will only overwrite this setting temporarily.
This step will define the language of menus and other
short messages shown on screen.
1. Open menu language menu.
NOTE
If language selected is not available on disc, the
language designated by each disc as default will be
selected.
1. Open subtitle language menu.
2. Use the UP and DOWN arrows to scroll the selections
and select the language and then press OK to return to
main menu.
2. Press UP and DOWN arrow to select language and then
press OK.
OPEN/CLOSE
dvd
tv
info
tuner up
level
digital
delay
stereo
digital
dvd
tv
tape sat/cab
video
tuner up
level
tape sat/cab
video
tuner
/ vcr
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
For languages other than options available:
3. Move down and select “Other” and then press OK.
4. Enter language code into boxes and then select OK to
return to main menu. Press OK button on the remote.
delay
tuner up
stereo
digital
pr
3
dvd
tv
2
5
8
0
level
1
tape sat/cab
video
4
6
tuner
/ vcr
7
9
RDS
pty
hifi dvd/cd
memo
tuner down
PLAY
clear
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:11 AM Page 9
DVD Player
Rating (Parental control)
Password
EN
This step will disable the playing of some DVDs (especially
U.S. type) which are not suitable for some audience, e.g.
children. Such kind of DVDs is encoded with a specific rat-
ing level. If the rating level of the disc is higher than the
preset level (to be set in this step), the playing will be pro-
hibited unless the password (see next step) is entered.
Set password
To disable the viewing of rated DVDs, a four-digit password
must be selected.
1. Open the “Set Password” menu.
1. Open the rating menu.
8
7
5
6R
4 PG-13
3 PG
2
Set Password
1 G
Change Password
2. Select “Set Password” and press OK.
2. Use the UP or DOWN arrows to highlight the rating that
would require a password to play. Press OK to return to
main menu. Ratings highlighted in blue require password.
3. Use the number buttons to enter password and then
press OK.
OPEN/CLOSE
dvd
tv
info
tuner up
level
digital
delay
stereo
digital
dvd
tv
tape sat/cab
video
tuner up
level
tape sat/cab
video
tuner
/ vcr
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
The rating systems is based on information encoded on the
DVD disc being played, so movies may carry a rating sym-
bol, the disc may or may not contain that rating in its soft-
ware. In addition to the five standard (MPAA) rating sym-
bols of “G” (level 2), “PG” (Parental Guidance, level 4),
“PG13” (Parental Guidance and 13 years old, level 4), “R”
(Restricted, level 6) and ”NC17” (from 17 years old, level 7),
the DVD will accommodate a total of 8 rating steps, as set
by the DVD makers. These additional steps allows for more
critical control of program playback for all audiences.
4. Repeat step 3 to confirm password.
Level 8: All DVDs can be played (Factory preset).
Level 7 to 2: DVDs for general audiences/ children can be
played.
Level 1: DVDs for children can be played, DVDs for adults/
general audiences are prohibited.
\
Note:
will be displayed on the VFD once password is set.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:11 AM Page 10
DVD Player
4. Use the number buttons to enter new password and
then press OK.
NOTE
5. Repeat the above step to confirm password and return
to password menu. Use the LEFT arrow to return to the
main menu.
• When incorrect password is entered, new
password menu appears and you can enter and
confirm password again.
• A lock icon shows on unit display when password
is required to view rated discs.
Clear password
Important: keep the password in a safe place or
remember it reliably as access to rated discs or
rating/ password menus requires the correct
password.
1. Refer to page 25 “General use” to open the password
menu.
2. Use the number buttons to enter password and then
press OK.
3. Move up or down the menu using the UP or DOWN
arrows and select “Clear Password”. Press OK to clear pass-
word. Use the LEFT arrow to return to the main menu.
Change password
Current password must be entered first to change
password.
1. Open the password menu.
Set Password
Change Password
2. Use the number buttons to enter password and then
press OK.
pr
delay
tuner up
stereo
digital
1
2
5
8
0
3
dvd
tv
level
4
6
tape sat/cab
video
7
9
tuner
/ vcr
memo
RDS
pty
hifi dvd/cd
PLAY
clear
REV
FWD
tuner down
3. Use the UP and DOWN arrows to select “Change
Password” and then press OK.
OPEN/CLOSE
dvd
tv
info
tuner up
level
digital
delay
stereo
digital
dvd
tv
tape sat/cab
video
tuner up
level
tape sat/cab
video
tuner
/ vcr
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DPL950-EN DVD new 5/7/03 10:11 AM Page 11
DVD Player
TV aspect
Dynamic range
EN
This step selects the TV aspect, wide-screen (16:9) or
conventional (4:3).
1. To disable/enable the dynamic function, enter the
dynamic range menu.
1. Open the TV aspect menu.
Soft
Softer
2. Use the UP or DOWN arrows to select TV aspect and
2. Use the UP or DOWN arrows to select Dynamic Range
then press OK to return to main menu.
and then press OK to return to main menu.
OPEN/CLOSE
dvd
tv
info
If you have a wide-screen (16:9) TV, choose “16:9
Widescreen”.
tuner up
level
digital
delay
stereo
digital
dvd
tv
tape sat/cab
video
tuner up
level
tape sat/cab
video
tuner
/ vcr
- For 16:9 movie you will get
(Do not select 16:9 widescreen setting
if you are using a 4:3 TV set. or the
image may look distorted with some
DVD disc.)
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
- For 4:3 movie you will get
Digital audio out
1. To select digital audio out, enter the digital audio out
menu.
If you have a conventional (4:3) TV,
- if you select 4:3 letterbox for 16:9
movie, you will get
Off
- if you select 4:3 Pan Scan for 16:9
movie, you will get (the left and right
edges are hidden)
Compressed
PCM
- for 4:3 movie, for both selections, you
will get
2. Use the UP or DOWN arrows to select digital audio out
and then press OK to return to main menu.
OPEN/CLOSE
dvd
tv
info
tuner up
level
digital
delay
stereo
digital
dvd
tv
tape sat/cab
video
tuner up
level
tape sat/cab
video
tuner
/ vcr
RDS
pty
hifi dvd/cd
tuner
/ vcr
tuner down
RDS
pty
hifi dvd/cd
tv
vcr/sat
menu
return
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|