Safety Information
If the colours of the wires in the mains lead of
UK Plug Information
CONNECT THE MAIN LEAD INTO A MAINS
POWER SOCKET
EN
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
POWER SUPPLY 230V. It must not be connected
to D.C. mains.
BLUE wire to the terminal coded N (Neutral) or
coloured black.
BROWN wire to the terminal coded L (Live) or
coloured red.
Note: The mains lead of the set is fitted with a
moulded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below. The
moulded plug cannot be rewired and if removed
must be disposed of safely.
DO NOT make any connection to
the terminal in the plug which is
marked
by the letter E or by the earth
symbol or coloured green or
green and yellow.
DO NOT under any circumstances plug the
severed plug into any mains socket as this could
result in electric shock.
A fused plug must be
fitted with a 3A fuse
approved by ASTA or
BS1362 and fuse covers
must be always be
securely replaced. If
you set does not work,
the fuse may be
Important: If the plug is removed, rewire the
new plug as follow:
The wires in the mains plug are coloured in
accordance to the following code:
BLUE = NEUTRAL/BROWN = LIVE
blown.
TM9049 EN
2
1/7/05, 10:18 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
•
Minimum distances around the apparatus
for sufficient ventilation.
Safety Precautions
EN
•
Never open the cabinet under any
circumstances. Any repairs or internal
adjustments should be made only by a
trained technician.
Front View
10 cm
10 cm
10 cm
CLOSE
PROG.
REPEAT
TRACK
STOP
•
•
Never operate this product with the cabinet
removed.
Do not use your System immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction.
PLAY
PAUSE
Side View
10 cm
•
•
Keep your unit away from humid areas and
abnormally hot places.
Do not touch the player with wet hands. If
any liquid enters the player cabinet, take
the player to a trained technician for
inspection.
This compact disc player uses a laser to read
the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a
record player. Although this product
incorporates a laser pick-up lens, it is
completely safe when operated according to
directions.
Discs rotate at high speed inside the player.
Do not use damaged, warped, or cracked
discs.
Do not touch the pick-up lens which is
located inside the disc compartment. To
keep dust from collecting on the pick-up
lens, do not leave the compartment door
open for an extended period of time. If the
lens becomes dirty, clean it with a soft
brush, or use an air blower brush designed
for camera lenses.
5 cm
•
•
The ventilation should not be impeded by
covering the ventilation opening with items,
such as newspaper, table-cloths, curtains, etc.
The rating plate is located at the bottom
cabinet of apparatus.
•
Headset Safety
•
Do not play your headset at high volume.
Hearing experts warn against extended high-
volume play.
If you experience ringing in your ears, reduce
volume or discontinue use.
You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air designed
to let you to hear outside sounds, do not
turn up the volume so high that you are
unable to hear what is around you.
•
•
•
•
•
•
The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Don’t Infringe
This product should only be used for the purposes
for which it is sold, that is, entertainment,
violating no copyright law. Any attempts to use
this product for unintended purposes are unlawful
and therefore not condoned by Thomson.
•
•
No naked flame sources, such as lighted
candles should be placed on the apparatus.
Attention should be drawn to the
environmental aspects of battery disposal;
the use of apparatus in tropical climates.
TM9049 EN
4
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CD player............................................ 6
Safety Information
EN
Notes on CD-R/CD-RW Discs ............................ 6
Selecting CD Mode .......................................... 6
Loading Disc ..................................................... 6
Play and pause ................................................. 7
Skip and Search................................................ 7
Stop Playback ................................................... 7
Random Playback ............................................ 7
Programming ................................................... 7
Clearing Program List .................................. 7
Repeat .............................................................. 8
Repeat Random ........................................... 8
Repeat Program........................................... 8
Important Information
Table of Contents .............................. 1
Before You Begin ............................... 2
Useful advice .................................................... 2
AC Power.......................................................... 2
Battery Power .................................................. 3
Important Battery Information .................. 3
General Controls................................ 4
Tape Player ......................................... 9
Main Unit ......................................................... 4
Playing a Tape .................................................. 9
Recording to Tape ........................................... 9
From Radio................................................... 9
From CD ....................................................... 9
Display................................................ 5
Sound Features .................................. 5
Volume Control................................................ 5
Bass Boost System ............................................ 5
Troubleshooting Tips....................... 10
Maintenance .................................... 11
Cleaning the Exterior .................................... 11
Handling CDs ................................................. 11
Cleaning CDs .................................................. 11
CD Lens Care .................................................. 11
Cassettes ......................................................... 11
Technical Specification .................................. 11
Radio .................................................. 6
Tuning to a Station .......................................... 6
1
TM9049 EN
5
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
•
Ensure minimum distance around the
Useful Advice
EN
apparatus for sufficient ventilation.The
ventilation should not be impeded by
covering the ventilation openings with items,
such as newspaper, etc.
No naked flame source, such as lighted
candles, should be placed on the apparatus.
Attention should be paid to enviornment
aspects of battery disposal.
•
Do not use your system immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction. If moisture forms inside this
system, it may not operate properly. To
correct the problem, turn off the power and
wait about 30 minutes for moisture to
evaporate.
•
•
•
•
•
This system is fitted with a laser. To avoid
accidents, it is to be dismantled by qualified
technicians only.
Never leave the tray open as dust could cover
the laser lens and/or the tray could be
bumped into accidentally.
Do not place the system near wet areas such
as bathrooms and pool side. Avoid storing the
system at humid places or near abnormally
heated areas.
AC Power
Plug the power supply cord into the AC power jack
on the back of the unit, and into an AC power
supply outlet that accepts the plug supplied with
your unit.
•
Power is continuously supplied to the system.
To disconnect power completely, unplug the
power cord from the power outlet.
2
TM9049 EN
6
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
A
t
t
e
n
t
i
o
n
:
Before You Begin
Battery Power
EN
You can insert 6 D-sized alkaline batteries (not
supplied) and you can take your stereo just about
anywhere.
Be sure to remove batteries
when storing the set for more than 30
days. Leaky batteries can badly damage
the system. Always return tape operation
buttons to their off position before
storing. This will relieve pressure on
certain parts in the tape recorder that
might deform after long periods of time.
Be sure to dispose of leaky, weak or dead
batteries properly according to federal,
state, and local regulations. To prevent
injury or damage, do not reverse batteries
and do not mix battery type.
•
Open the battery compartment door on the
bottom of the unit by pressing down on the
tab and pulling out the cover.
•
Before inserting the batteries, observe the
polarities (that is, + and -) of the battery, then
relate the polarities to the engraved diagram
located on the battery compartment door.
Insert batteries in the battery compartment.
Note that the AC line cord must be
unplugged from the jack on the back of the
unit to operate on batteries.
Important Battery Information
•
Remove the batteries to avoid leakage if you
do not use your system for more than one
month.
•
Discard leaky batteries immediately as leaking
batteries may cause skin burns or other
personal injuries. Dispose of batteries in the
proper manner, according to provincial and
local regulations.
•
Any battery may leak electrolyte under the
following circumstances:
- if mixed with a different battery type,
- if inserted incorrectly,
- if all batteries are not replaced at the same
time,
- if disposed of in fire, or
- if an attempt is made to charge a battery
not intended to be recharged
3
TM9049 EN
7
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
General Controls
Main Unit
EN
W
M
CLOSE
REPEAT
STOP
PROG.
TRACK
MW
PLAY
PAUSE
DBBS
B
A
S
D
N
U
S
B
O
S
O
O
S
T
STOP
EJECT
REC
PLAY
REW
FWD
PAUSE
SOURCE SELECT / OFF / TAPE / RADIO / CD -
Selects OFF / TAPE, RADIO or CD mode.
STOP
- Stops CD playback.
PROG. - In CD mode, enters program mode and
confirms program setting.
RADIO BAND FM / MW - Selects between FM and
MW radio bands.
CD OPEN - Opens CD door.
TUNING
stations.
- Rotate to search for radio
- Connects headphones.
CLOSE - Push to close the CD door.
PHONES
Cassette Player
REC - Starts tape recording.
VOLUME MIN / MAX - Increases or decreases
output volume.
PLAY - Starts tape playback.
REW - Rewinds tape.
DBBS - Turns bass boost sound on and off.
REPEAT - Toggles repeats 1 track and repeat entire
disc playback.
FWD - Fast forwards tape.
- Selects random playback.
STOP/EJECT - Stops tape playback, winding or
recording, opens cassette door.
TRACK
/
- In CD mode - Searches/ skips
CD track backward or forward.
PAUSE - Pauses tape playback.
PLAY / PAUSE - Starts or pauses CD play.
4
TM9049 EN
8
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
s:
Display
Random playback
EN
Repeat mode
- REPEAT - repeats current
track
- REPEAT ALL - repeats
entire disc
- REPEAT PROGRAM -
repeats program
In CD stop mode -
displays total track
number
During CD playback -
displays current track
number
REPEAT
ALL
PROGRAM
Program mode
In CD playback
mode
Sound Features
Volume Control
Bass Boost System
Adjust the VOLUME knob to your desired listening
level.
Press DBBS to turn on and off the digital bass
boost sound function.
You may listen through headphones by
inserting one pair into phones
jack.
5
TM9049 EN
9
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
T
i
p
s
:
No
tes
o
n
C
D
-R/
RW
N
o
t
e
:
Radio
Tuning to a station
EN
1. Select RADIO with the SOURCE
SELECT switch.
2. Slide the RADIO BAND switch to
select between FM and MW band.
Extend or reposition the antenna for better
FM reception. Rotate the unit for better
MW reception.
3. Rotate
TUNING
to select radio station.
CD Player
CD-R / RW
This unit is compatible with
audio CD-R/RW discs.
Selecting CD Mode
Select CD mode by sliding the SOURCE
SELECT switch to CD.
Loading Disc
• Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
1. Press the CD OPEN button to slide disc tray
out.
2. Place a disc on the disc tray with the label
side facing up.
• To avoid damages to the CD-R/RW disc,
do not open the disc compartment door
while the disc is being read.
3. Push the disc tray back in.
The total number of tracks on the disc can be read
from display.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
•Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
“--” shows on the display when the CD
compartment door is opened, during CD
reading and when there is no disc in the
tray.
6
TM9049 EN
10
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
s:
Note:
CD Player
Programming
Play and Pause
EN
1. In stop mode, press PROG. to enter program
mode. The program location will flash once on
the display. Then the track number stored in
the memory location will keep flashing.
If the memory location is empty, 00 will be
flashing.
1. In stop mode, press PLAY/PAUSE
to
begin CD playback.
The
icon is displayed.
2. During CD playback, press PLAY/PAUSE
to
pause playback. Press again to resume.
The
icon flashes in pause mode.
2. Press
or
to select the track you
want to program.
3. Press PROG. again to confirm your selection
and access the next program location.
4. Repeat steps 2 to 3 to program to a maximum
of 20 tracks.
Skip and Search
1. Press
next track respectively.
2. Press and hold or
or
to skip to the previous or
to search quickly
5. Press PLAY/PAUSE
in program mode to
current track backward or forward
respectively.
start program playback (PROGRAM indicator
remains lit on the display).
Press STOP
to return to normal playback
mode.
Stop Playback
Press STOP
to stop playback.
Random Playback
If you are in normal playback mode but want
to play the saved program. Press PROG. and
then PLAY.
In stop mode, press
to activate random
function and begin random playback.
The
icon appears on display when random
playback is activated.
Press STOP
to de-select random playback
mode.
Clearing program list
Your program will be erased once you open the disc
compartment door or change to another source
mode (e.g. radio).
Random playback can not be selected in
program mode.
7
TM9049 EN
11
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
s:
CD Player
Repeat Program
Repeat
EN
When Program playback mode is selected, press
Press REPEAT once to repeat the current track and
REPEAT for repeat program options.
the REPEAT icon shows on display.
Press REPEAT once in program mode to repeat
the current song in the program. The REPEAT
icon lights on the display with the PROGRAM
icon flashing.
Press REPEAT twice to repeat the entire disc and
ALL
REPEAT
icon shows on display.
Press REPEAT a third time to turn off repeat
mode.
Press REPEAT again in program mode to repeat
ALL
the entire program. The REPEAT
lights ont
the display and PROGRAM icon flashes.
Repeat Random
When random playback mode is selected, press
Press REPEAT again to return to normal program
playback.
REPEAT for repeat random options:
press REPEAT once to repeat the current song.
press REPEAT twice to activate repeat random.
ALL
The REPEAT
and
icons are displayed.
Press REPEAT again to return to normal random
mode.
Press STOP
to de-activate Repeat,
Random or Program mode.
8
TM9049 EN
12
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
A
t
t
e
n
t
i
o
n
:
Note:
Tape Player
Recording to tape
Playing a tape
EN
From radio
1. Slide the SOURCE SELECT switch to
OFF / TAPE.
2. Press STOP/EJECT to open the tape
deck door.
3. Insert a tape into the door and push the
door closed.
1. Insert a tape into the deck.
2. Slide the SOURCE SELECT switch to RADIO.
3. Slide the RADIO BAND switch to select radio
band.
4. Rotate
TUNING
to select the station to
be recorded.
5. Press REC and PLAY together to begin
recording.
6. Press PAUSE or STOP to pause or stop the
recording respectively.
Be sure to slide the cassette into the tape
slot on the door. Do not place the tape
directly onto the tape mechanism.
From CD
1. Insert a tape into the deck.
2. Slide the SOURCE SELECT switch to CD.
3. Insert the disc to be recorded.
4. Select the track or program to be recorded.
5. Press REC and PLAY together to begin
recording.
6. Play the CD track or program to be recorded.
7. Press PAUSE or STOP to pause or stop
recording respectively.
4. Press REW or FWD to wind the tape to the
desired starting position. Press STOP/EJECT
to stop winding.
5. Press PLAY to start playback.
Press PAUSE to pause playback (press again
to release the button to resume playback).
Press STOP/EJECT to stop playback.
For better recording quality, use normal
bias tape (Type I) only.
9
TM9049 EN
13
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Tips
EN
Problem
Solution
•
•
Unplug the unit for a moment, and then plug it back in.
Check the outlet by plugging in another device.
System doesn’t turn
on
•
•
Adjust volume setting.
Make sure you’ve selected the correct function.
No sound
•
•
Adjust the antenna for better reception.
Try turning off electrical appliances near the unit, such as hair dryers,
vacuum cleaners, or fluorescent lights.
Poor radio reception
•
•
•
•
•
Make sure you’ve put a CD in the tray.
Make sure the CD’s label is facing up.
Try another CD.
Make sure that Pause mode is not activated.
Make sure CD function is selected.
CD doesn’t play
CD sound skips
•
•
•
Clean the CD (as explained in “Maintenance”).
Check CD for warping, scratches, or other damage.
Check for vibration or shock that may affect the unit; move the set if
necessary.
ESD Remark:
In case of misfunction due to electrostatic discharge just reset the product (reconnect of power source
may be required) to resume normal operation.
10
TM9049 EN
14
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the exterior
CD Lens Care
EN
•
Disconnect the system from AC power
before cleaning the exterior of the unit with
a soft dust cloth
•
When your CD lens gets dirty it can also
cause the system to output poor sound
quality. To clean the lens you will need to
purchase a CD lens cleaner which can
maintain the output sound quality of your
system. For instructions on cleaning the CD
lens, refer to the ones accompanying the
lens cleaner.
•
Clean the exterior with a soft clean cloth or
slightly moistened chamois leather. DO NOT
use solvents as it may cause damage to the
unit.
Handling CDs
Cassettes
•
Do not touch the signal surfaces. Hold CDs
by the edges, or by one edge and the hole.
Do not affix labels or adhesive tapes to the
label surfaces. Do not scratch or damage the
label.
•
To protect your recordings from accidental
erasure on one or both sides of your
cassette, snap out the tab at the top of the
cassette. If you decide later to record on the
tape, seal the hole with a piece of adhesive
tape. (Refer to diagram)
•
•
•
CDs rotate at high speeds inside the player.
Do not use damaged (cracked or warped)
CDs
Make sure CDs are stored in their original
case after use. Keep them away from damp,
humid or abnormally heated places.
A
A
A
A
6 0
Cleaning CDs
•
Quit Slacking - A little bit of
slack in your tapes can cause
scratches on the tape, or worse
yet, the tape could break. If
you notice some slack in the
tape, use a pencil to tighten it
up before you insert it.
•
•
•
Dirty CDs can cause poor sound quality.
Always keep CDs clean by wiping them
gently with a soft cloth from the inner
edge toward the outer perimeter.
If a CD becomes dirty, wet a soft cloth in
water, wring it out well, wipe the dirt away
gently, and then remove any water drops
with a dry cloth.
Do not use record cleaning sprays or
antistatic agents on CDs. Also, never clean
CDs with benzene, thinner, or other volatile
solvents which may cause damage to disc
surface.
A
Technical Specification
Power supply: 230V~50Hz
Dimensions ( H x W x D mm):
Unit size - 152 x 368 x 279
CD player: Response curve (+/- 2dB):
60Hz to 20 kHz
Rating Plate: Look for it at the bottom of the set.
11
TM9049 EN
15
1/7/05, 10:19 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|