TechniSat Satellite Radio ST 6002 S User Manual

ST 6002 S

OPERATING INSTRUCTIONS

Satellite Receiver

VIDEO

AUDIO

TechniSat ST 6002 S Stereo

SKEW

MUTE

ENTER

CNCL

TechniSat

ST 6002 S

TechniSat ST 6002 S

STAND BY

TechniSat^®Satellitenfernsehprodukte GmbH,TechnikPark, W-5568 Daun

202/ /93

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Diagram: Front Panel, Remote Control, Back Panel

Standby LED

4-Fig.Display

STAND BY

Satellite Selection

Buttons

Channel Selection

Buttons

ON/OFF Power

Switch

(East /West)

Standby on/off

Key Pad

VIDEO

AUDIO

Video-Menu

Audio-Menu

Skew-Menu

SKEW

MUTE

ENTER

CNCL

Mute on/off

CNCL-Button

-Button

ENTER-Button

-Button

Main Menu

-Button

TechniSat

ST 6002 S

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

3. Safety Instructions

In the interest of safety, please read and observe the following instructions before using your

new ST 6002 S.

This sheet and the following pages concerning installation and operation should be retained for future

reference.

Installation:

The procedures described in this manual should be followed carefully.

NOTE: Always connect the LNB before connecting to the mains supply.

Failure to do this may cause damage to the appliance.

Ventilation:

Vents on the top and side panels are provided for necessary ventilation. The appliance should not be

placed in a position where the free passage of air would be severely restricted. In addition, for the same

reasons as above the ST 6002 S should not be placed on a soft base.

Water and moisture:

Ensure that the appliance does not come into contact with any dampness or moisture - RISK OF ELEC-

TRIC SHOCK (and/or damage to the ST 6002 S)!

Heat:

Do not install the ST 6002 S in the immediate proximity of a heat source (radiator, oven etc.).

Care and Use:

Power Source:

Connect the ST 6002 S to a power supply which matches the requirements of the appliance (220 - 240

V/50 Hz).

Safe Connection to the Mains:

The mains leads should be routed so that they are not likely to be walked on or pinched by items pla-

ced against them.

When not in use:

If the ST 6002 S is left unattended or unused for long periods of time be sure to unplug the mains connec-

tor. The memory is still stored and the internal clock is supplied by an inbuilt battery.

Unplug the ST 6002 S from the mains when:

- the mains lead or mains connector is damaged

- the ST 6002 S has been exposed to rain or water

- a solid object or liquid substance has entered the appliance via the air vents

- there is a noticeable change in the performance of the ST 6002 S, not operating as normal

- the ST 6002 S has been dropped or the outer casing has been damaged

NOTE:

Servicing and repairs must only be carried out by trained service staff.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

4 Features of the ST 6002 S:

The ST 6002 S has the following features:

– 200 preprogrammed channel places

– OSD (On-Screen-Display)

– Infra-red remote control for all functions

– Timer function for 8 settings

– Integrated dish positioner

– 50 storable satellite positions

– Autofocus

– Panda Wegener compatible noise reduction

– Volume control

– Adjustable video bandwidth

– Switchable modulator PAL G/I

– Free selection and storing of audio and video parameters

– Scart connection for TV or VCR

– Scart connection for decoder or VCR with 4 output signals

– Short-circuit proof LNB-input

– Preprogramming for connection of a triple band LNB (11 GHz, DBS, 12 GHz)

– Input frequency range 950 - 2050 MHz

VIDEO

AUDIO

SKEW

MUTE

ENTER

CNCL

TechniSat

ST 6002

TechniSat ST 6002 S

STAND BY

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

5 Brief Introduction

We have condensed the most important steps for the installation and use of the ST 6002 S. More

detailed information can be found in chapters 6 - 10 of this manual.

It is essential that a high quality outside unit with Triple-Band-LNB is used. If another kind of LNB is

used, the procedure is the same, but you will not be able to receive all satellites.

5.1 Installation

5.1.1 Connection of Outside Unit and TV

LNB

Connect your ST 6002 S to

TV Antennae

FERNSEH-

POLARIZER

ANTENNE

the LNB of the outside unit

using suitable coaxial cable

(eg. TechniSat coaxsat 1750).

MOTOR

IMPULS-

Pulse

GEBER

Generator

Connect the actuator power

cable to the M1/M2 sockets

and the actuator sensor cable

to the "Pulse" and "GND"

sockets.

FERNSEH-

TV Antennae

ANTENNE

FERRIT

–

EXT BUS

RF IN

220V

240V

UHF OUT

82 ohm,

45 mA MAX

FUSE

250V T500mA

The polariser should be lin-

ked via the "Ferrite +/-" sockets.

LNB PWR OUT

DC 14/18V

400 mA MAX

GND

PULSE

+5V

(

B(R)-AUDIO-(L)A

EURO SCART FOR VCR/DECODER

EURO SCART FOR TV

B/G

TESTSIGNAL

VIDEO

AC 240V 50 Hz

110 WATTS MAX

TSG

FUSE

250V T500mA

ANT IN

50 mA MAX 36V 1,5

MAX

VIDEO

DECODER VIDEO

ANTENNEN-

Antenna

Power

S_Ie_Mn_Ps_Uo_Lr_S-

C^Ga^Eb^Ble^ER

MOTOR

Cable

KABEL

Cable

To connect your television to

the ST 6002 S you should use

a euroscart cable. The TV set

should be set correspondingly

to AV.

Alternatively, you can connect

the appliance to your TV at

the UHF/VHF input socket via

UHF antenna cable. If this

connection is made you should

first of all switch to "TSG" on

Scart Cable

SCARTKABEL

the back panel of the ST 6002 S and tune your TV set to channel 36, at which point the test signal

(two vertical white stripes) will appear on the screen. Then return the switch to "Video" on the back

panel.

NOTE: The satellite receiver is preset to channel 36. If channel 36 is already occupied by a terrestri-

al channel it is possible to alter the output channel in the range fom 35 - 44. This can be done using

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

5.1.2. Installation of the Receiver

F Taste auf der Fernbedienung

R Taste am Receiver

Function

Button

TV Picture

Display on the receiver

Basic Programming

no satellite

F 001

press

simultaneously

Basic Programming

ENTER 3 x

System Menu

Position 5000

F 001

Setting East/West

Limits

Note: Make sure

the dish is not

moved too far

around

ENTER

Hold down until

west limit is

reached

Position 5439

(Example)

Position 5409

Hold down & move 30

Impulses back

West limit

West limit 5409

ENTER

Hold down until

east limit is

reached

Hold down & move

30 Impulses back

Position 4821

(Example)

Position 4851

East Limit

ENTER

CNCL

East Limit 4851

System-Menu

Sat programming

Sat: 19,2o ASTRA

Position 4851

CH 01

Satellite

Programming

Enter

Hold until the

satellite is

received

Position 5120 (Eg..)

CH 01

Position

CH 01

Position 5120

Position 5125 (Eg.)

System-Menu

Sat: 60o Intel 604

Sat: 16o Eutel II-F3

Search 16o Eutel

II-F3

Sat: 13o Eutel II-F1

Search 13o Eutel

II-F1

ENTER

CNCL

ENTER

3 x

Autolocation

ENTER 2 x

CH 05 (Eg.)

ENTER 2 x

usw.

CH 04 (Eg.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

If a satelite cannot be found:

Sat programming

CNCL

System-Menu

F 113 (Bsp.)

F 113

CH 01

Sat programming

Sat 27,5w Intel 601

(Example)

ENTER

Position 5204 (Eg.)

CH 01

hold

until a satellite

is received

Position 5402 (Eg.)

Position

CH 01

Position 5402 (Eg.)

Position 5406 (Eg.)

Sat 27,5w Intel 601

Sat 45w PanAmSat

ENTER

2 x

If all Satellites

have been

programmed

CNCL 2 x

001

“Programme of the

(

)

last programmed-

Satellite”

“Programm PRO 7

from ASTRA”

F 001

5.2. Bedienung

Channel Selection

19,2o ASTRA 003

19,2o ASTRA 001

F 003 (Eg.)

F 001

001

ENTER

press

ENTER

F 005

F 061

005 ARD 1 Plus

061 RADIOROPA

19,2o ASTRA 061

RADIOROPA

Volume

Control

Mute

Vol.:

Mute

. . .

. . . . .

F 006 (Eg.)

F 007

Mute

19,2o ASTRA 007

Time Display

Set Timer

ENTER

2 x

ENTER

2 x

19:15

Nord 3

F 007 (Eg.)

F 007

Set Timer

Time 1 aus

Channel 007

Channel 005

Month 09/1992

Month 10/1992

Day 08/Thurs

Day 10/Sat

Start 19:01

Start 20:15

Stop 19:03

Stop 22:00

Type single

Type daily

Date 10. 10, 1992

Date 17. 10, 1992

Zeitpunkt 1 ein

“Channel 007”

005 oder

2 x

2015 oder

2200 oder

press

ENTER

CNCL 2 x

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6. INSTALLATION

IMPORTANT: If you press any button whilst the

dish is moving, the movement will stop imme-

diately. Where possible avoid this when pro-

gramming satellites and when using the auto-

matic satellite search. Otherwise, satellites that

have already been saved could be deleted.

6.1. Installation of Outside Unit

6.1.1. General

The following instructions assume that the system

has been installed correctly so that all the satel-

lites can be received.

The receiver ST 6002 S has many functions.

For ease of use and so that it is not necessary

to use a different button for each function the

receiver uses "On Screen Display" and func-

tion keys. In this way related functions are con-

densed into "Menus". An arrow shows which

function is in use. Underneath each menu the

various keys which may be used are shown.

By using the CNCL key you can leave each

menu without saving the alterations.

ATTENTION: The ST 6002 S has been pro-

grammed for use with a Triple-Band-LNB. With

this you can receive all three frequency bands

(11 GHz, DBS and 12 GHz). If you use a Dual-

Band-LNB please pay attention to the changed

input frequencies in the 12 GHz band (prepro-

gramming pages 40 - 44).

Input frequency for Dual-Band-LNB in 12 GHz

band

Input frequency for Triple-Band-LNB minus

725 MHz

E X A M P L E -

Cursor

Functions

Function Keys

C N C L

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Switch on the receiver using the mains power switch (on the appliance). The following menu appears

on the TV screen:

To go to the System Menu switch the receiver into stand-by mode using the remote control unit (

hold down the buttons on the front of the receiver simultaneously for a few seconds. The

System Menu will appear on the screen on a blue background. An arrow appears next to Basic Pro-

). Now

gramming. By pressing the

down.

buttons on the remote control, this arrow can be moved up and

ATTENTION: If you press the CNCL button when the System Menu is on the screen the receiver is

in the normal operation mode (see chapter 7). To recall the System Menu follow the procedure outli-

ned above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.1.2 Basic Programming / Initial Set Up

Initially to program the receiver you have to carry out a Master

Reset. Therefore, move the cursor

to the option "Master

Reset" on the System Menu and press ENTER.

ENTER

After the first press a red warning screen appears. This will

disappear when you press ENTER twice more and your recei-

ver is then set.

ATTENTION: The preprogramming of the receiver is not affec-

ted by the cancellation procedure. This data is in the memory

and cannot be deleted.

After the third press the message "All memory cleared" will

appear and you will immediately return to the System Menu.

This time the arrow is pointing to "Set Dish Limit".

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.1.3 Setting the East/West Limits

Choose the option

"Set Dish Limit" and press ENTER.

Then move the cursor to "Position 5000".

First move the dish west by pressing > on either RCU or on

front panel until the desired west limit is obtained. (Whilst the

dish is being moved the position no's will be displayed on the

screen.)

ENTER

Move the cursor using

to "West Limit" and press ENTER.

This limit is automatically stored.

Now return to "Position" and move the dish to the east by pres-

sing

on either RCU or front panel until the desired east limit

to "East Limit" and press

is obtained. Move the cursor using

ENTER. Once again this limit is automatically stored.

NOTE: The message "Jack Error" will appear on the scre-

en if the actuator is not connected properly.

Press CNCL to return to System Menu.

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.1.4 Programming of Satellite Positions

Choose the option "Program Satellite " from the System Menu

and press ENTER to display a table of parameters.

ENTER

Move cursor to "Sat" and use the

keys to select the desi-

red satellite i.e. ASTRA 19.2 E. Then move cursor to "Chan-

nel" and select a known frequency i.e. 1250 MHz Eurosport.

Now move the cursor to "Position" and move the dish using

the

buttons until you receive the desired channel. Then

button on RCU to trans-

move the cursor to "Pos" and press

fer the position no. By pressing ENTER the receiver will search

for the position of best reception (Autofocus) which is then sto-

red automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Return the cursor to "Sat" and use the

buttons to select

the satellite which you wish to store next. Repeat the same

procedure as described above. All satellites can be stored by

this method.

NOTE: Not all satellite channels are transmitting continuous-

ly. Additionally, it may also be necessary to alter the "Skew"

values depending on the polariser type (refer to later section

on "Changing Channel Parameters").

Programming of Future Satellites

1. If you wish to store a new satellite which is not already pre-

set, you can choose an already stored channel with a frequency

which is nearest to the frequency of a channel on the new

satellite. The polarisation and LNB type must also be taken

into account. After entering the required data, move the cur-

sor to “Position” and move the dish using the

you receive the desired channel.

keys until

2. Now move the cursor to “Sat” and select a satellite which

is not already stored (Spare 1-32). The channel selected pre-

viously can no longer be viewed. Move the cursor to “Pos” and

press

followed by ENTER on RCU. The satellite is now sto-

red. To store the channels on this satellite it is necessary to

follow the procedures set out in the section on “Channel data".

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Automatic Location of Satellites

1. Choose the option “Auto location” on the System Menu.

The use of this function requires that ASTRA has already been

stored and that a TechniSat actuator is connected to the St

6002 S. Note only satellites with a comparatively strong signal

can be stored by this method.

2. Start with Eutelsat 16 E. Press the

buttons until this

satellite appears in the display. Then press ENTER and con-

firm by pressing ENTER again. If the satellite is stored suc-

cessfully the following message is displayed for about 3 seconds:

ENTER

“Satellite peaked ... dish position stored”

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

3. Repeat the same procedure for Eutelsat 13,10 E, and then

for satellites further west of ASTRA. If you do not find a satel-

lite using this method, program it manually as described befo-

re.

4. After you have stored all satellites west of ASTRA, program

those which are further east of ASTRA.

Press CNCL to return to System Menu

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.1.6. External Programming

It is possible to transfer data between two ST 6002 S or bet-

ween a personal computer and the ST 6002 S. To do this you

require a cable with two RS 232 connectors. If you wish to

exchange data with a personal computer you require in addi-

tion the appropriate software (disc). Prerequisite is that the

computer has a RS 232 serial port. Both the cable and the soft-

ware can be ordered from TechniSat.

Select "Interface ext-link" from the System Menu. (To return to

the System Menu first switch the appliance into stand-by mode

using RCU, and then press the

buttons on the front panel

simultaneoulsy for a few seonds.)

Connect both appliances with the appropriate cable as shown

below:

To transfer data from one ST 6002 S to another, select "Master"

on the programmed receiver and "Slave" on the receiver you

wish to programme.

Point the remote control at both receivers and press ENTER

to inititate the data transmission.

Press CNCL to leave this menu.

NOTE: External programming via a computer is described in

a separate software manual.

ENTER

TX 2

GND 5

RX 3

TX 2

GND 5

RX 3

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.1.7 System Options

Move the cursor to the menu option "Change System Options"

and press the ENTER button. Choose the appropriate LNB by

pressing the

lowing table:

buttons on the RCU according to the fol-

Vert / Horz:

LNB with 14/18 V polarisation switch (V/H-LNB)

LNB1/LNB2: LNB with 14/18 V frequency range switch

(Dual/Triple-Band-LNB)

ENTER

Fixed 18 V:

for other applications

Next you can select the on screen graphic language option,

either English, German or French, once again using the

keys on the RCU.

Press CNCL to return to the System Menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Frequency shift

It is possible to tune in the receiver to the frequency of the LNB

should it not be supplying the exact IF-frequency:

1. Select a channel which is already stored, and which is trans-

mitting in the 11GHz range. Switch the receiver into stand-by

mode and call up the System Menu by holding down the

buttons on the front panel simultaneously

ENTER

2. First select the option “Change system options”, then “Glo-

bal shift LNB”. The blue background disappears and you can

view the selected channel.

3. Tune the frequency up or down using the

buttons

(AFC +/-15, 0.25MHz steps). Once you have achieved the best

picture quality you can store the frequency shift by pressing

ENTER.

NOTE: This affects all 11GHz channels

4. You can also alter the 12GHz range. First select a 12GHz

channel and proceed as above. Press CNCL to leave System

ENTER

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.2. Connecting a Videorecorder or Decoder

+ FERRIT –

EXT BUS

Connection of a Videorecorder

RF IN

220V

240V

UHF OUT

82 ohm, ± 45 mA MAX

FUSE

250V T500mA

To record the signal of the ST 6002 S you can connect the videorecorder either to the “VCR/Dec”

LNB PWR OUT

GND

PULSE

+5V

DC 14/18V

(

400 mA MAX

B(R)-AUDIO-(L)A

EURO SCART FOR TV

EURO SCART FOR VCR/DECODER

scart socket or to the UHF output. It is also possible to use the video/audio phono sockets.

Make sure that you have a direct connection from the videorecorder to the TV set in accordance with

B/G

AC 240V 50 Hz

110 WATTS MAX

TSG

FUSE

250V T500mA

ANT IN

50 mA MAX 36V 1,5 A MAX

VIDEO

DECODER VIDEO

the diagrams below:

B(R)-AUDIO-(L)A

SCART

(EURO AV)

DECODER VIDEO

Connection of a decoder

The coded reception signal is sent from the “VCR/Dec” scart socket to the decoder. The decoded sig-

nal is sent back to the receiver and can be picked up at the TV scart socket or at the UHF output

connection. Therefore connect the decoder at the “VCR/Dec” scart socket as shown above.

The output signals for a decoder can also be picked up at the audio/video phono sockets.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

6.3 Menu Overview: System Menu

C N C L

N C L

ENTER

N C L

ENTER

N C L

ENTER

N C L

ENTER

C N C L

ENTER

N C L

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7. Operation

7.1. General

The receiver ST 6002 S has many functions. For ease of use and so that it is not necessary to use a

different button for each function the receiver uses "On Screen Display" and function keys. In this

way related functions are condensed into "Menus". An arrow shows which function is in use. Under-

neath each menu the various keys which may be used are shown.

EXAMPLE:

Cursor

Function

Function Keys

C N C L

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.2. Direct Operation

You can select the desired channel via the Key Pad. Simply select the channel number (see the pro-

gram tables). The channel number will appear on the receiver display and also on the screen.

When you choose a 3-fig. channel number the receiver goes directly to the desired channel. If a 1-

or 2-fig. number is selected, the receiver waits initially for a further number. If this is not selected after

a few seconds it will directly go to the 1- or 2-fig. channel.

Example:

Input 004

Input 04

the receiver goes directly to channel 4 and the screen will show the

satellite programme number and programme name

the third place of the screen display flashes for about 3 seconds and

then goes to programme 4

When the desired channel is from another satellite, the receiver will automatically turn to the new posi-

tion. If this satellite has not been stored, a message will appear.

In addition to this there is the possibility to use the

keys to select the previous or next channel.

If in doing this the limits of the satellite are reached, the following message appears on the screen:

nächster Satellit

XXXXX

drücken Sie:

ENTER

This message stays on the screen for a few seconds. The channel will only be selected if you press

ENTER and the dish will then move to the desired satellite.

With the

keys on the RCU you can adjust the volume.

Every time you press ENTER, the name of the satellite, channel number and time will appear on the

screen.

With the keys

on the receiver you can choose other satellites and with the keys

.on the

receiver you can change channels. In this way you can operate the receiver without the RCU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.3. Menu Operation

7.3.1. Channel Selection

Move the cursor to “Channel selection” and press ENTER. Use

the

keys to move the cursor to the desired channel and

press ENTER.

Stored channels are marked with a quaver.

C N C L

It is also possible to enter the channel no. directly, 3 digits ie.

009 Eurosport

NOTE: To view any particular channel you simply have to sel-

ect the channel no. It is not necessary to select the relevant

satellite first.

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.3.2. Satellite Selection

Choose the option “Satellite selection” from the menu and press

ENTER. A list of all the satellites will appear, those which are

stored being marked with a quaver. Move the cursor to the

desired satellite and press ENTER. Now the dish moves until

the position is reached. Non-stored satellites can not be acces-

sed.

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.3.3 . Setting the Timer

1. Move the cursor to “Program timer events” and then press

ENTER. Select Event 1 and press ENTER.

2. Use the

with the

buttons to move the cursor to “Channel” and

buttons select the required channel. The name

of the respective satellite is automatically called up. You also

have the option of entering the channel no. directly via the key

pad.

ENTER

3. Move the cursor accordingly from “Month”, to “Day”, “Start”

and “Stop”, entering the data as above using the

keys. You

can also enter the data for the “Start” and “Stop” fields direct-

ly via the key pad ie. enter 2245 for 22.45

4. Finally, in the “Type” field you can enter whether it is a single,

daily or weekly recording. In the case of daily or weekly recor-

dings you must in addition enter the last day on which the recor-

ding is to be made

By pressing ENTER the information will be stored and you will

return to the previous menu. The entered time period is now

labelled with “on”. In this manner it is possible to program up

to 8 different record time settings. If overlapping times are ente-

red, the receiver picks this up and does not accept them. To

delete a record time slot press CNCL.

ENTER

NOTE: having programmed a record time setting you should

not switch off the receiver at the mains, otherwise a recording

is not possible. To switch the ST 6002 S on and off use only

the stand-button.

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.3.4. Setting the Clock

Move the cursor to “Internal clock adjustment” and then press

ENTER. Use the position keys to move the cursor to the appro-

priate line and keep pressing the

keys until the required

data appears. Then press ENTER to start the clock. To return

to the main menu press CNCL.

The clock continues to function once the receiver has been

switched off at the mains. A special battery is built in to the

receiver with a guaranteed long life.

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.3.5. Alignment Dish Position

a) If you wish to shift all satellite positions, eg. after a storm

has influenced the dish position, first choose a satellite with a

less powerful signal. Then move the dish using the

tons until you receive an optimum picture.

but-

Set the cursor to “Shift all satellites” and press ENTER. The

shift which is made to the present satellite position will be used

to automatically correct the other satellite positions.

b) The “Auto focus” function is designed to shift the present

satellite position to achieve optimum reception for all available

channels on a particular satellite. Simply move the cursor to

“Auto focus” and press ENTER; the dish will move automati-

cally to the position of best reception.

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

7.3.6. Parental Channel Lock

It is possible to deny access to channels which you only wish

to be called up via the remote control. Operating the applian-

ce using the buttons on the front panel is no longer possible:

a) Having selected the appropriate channel select the option

“Parental channel lock” and press ENTER. The message “Chan-

nel locked” will appear on the screen. On the receiver display

the channel indicator F*** will be replaced by L***. In addition,

the receiver automatically moves on to the next channel.

Now it is only possible to call up a blocked channel by direct

entry of the channel number via the key pad.

ENTER

b) To lift the block you must first call up the blocked channel.

Then press the MENU button and move the cursor once again

to “Parental channel lock”. By pressing ENTER the block on

the channel is lifted and the message “Channel unlocked” is

displayed.

8. Programming

8.1. General

All channels that are known at this time have been stored in the ST 6002 S. However, as new satel-

lites and channels frequently can appear, it is possible for you to receive and store these yourself.

To do this you need to obtain the appropriate publication that reports on all such developments.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.2 Channel Data

Changing the channel sequence

You can use this function to put the channels in the order which

you prefer. To transfer the present channel move the cursor to

“Channel data” and press ENTER. Now select the option “Copy

channel data” and enter the channel number you wish to move

the channel to.

NOTE: The data of the channel you wish to move to will be

overwritten. This can be avoided by making use of a free chan-

nel as an intermediate channel ie. Ch 044:

ENTER

EXAMPLE:

Preprogramming:

Ch 001: RTL Plus

Desired Programming:

Ch 001: Pro 7

Ch 002: RTL Plus Ch 002: Pro 7

Proceed as follows:

Ch 001 to Ch 044 ........... Pro 7 on Ch 001 & 044

Ch 002 to Ch 001 ............RTL Plus on Ch 002 & 001

Ch 044 to Ch 002 ............Pro 7 on Ch 002

& RTL Plus on Ch 001

ENTER

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.3 Expanding the Programmable Range of a Satellite

Only a certain number of channels are available to each satel-

lite unless you choose to extend them eg. ASTRA Ch1-61 &

199-200

(16 channels have been set aside for Astra 1C)

NOTE: A full listing of the preprogrammed channels and the

respective satellites is available at the back of this manual.

1. For example, should you wish to store a new radio station

on channel 62, first of all select channel 61, press MENU and

choose “Channel data”, then “Copy channel data”.

ENTER

2. Move the cursor to “Channel” and select channel 62. When

you press ENTER, the data of channel 61 will be copied to

channel 62, so that channel 62 is now available to ASTRA.

The former data of channel 62 is erased.

3. Now you can tune the new radio station by changing the

parameters (Video/Audio/Skew)

ENTER

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.4 Programming The Channels of new Satellites

1. First program the new satellites as described in the section

on "Programming of Future Satellites".

2. Select an already stored channel whose parameters are

similar to the ones of the new channel. Move the cursor to

"copy channel data" and press ENTER. Move the cursor to

"sat" and select the new satellite e.g. "Spare 1".

ENTER

3. Now move the cursor to "Channel" and choose the one you

wish to use for the new satellite. Then press ENTER.

NOTE: The former data of the channel you copy to will be era-

sed. Then alter the parameters accordingly in order to recei-

ve the new channel (Video/Audio/Skew).

ENTER

C N C L

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.5 Changing the Channel Name

Select the channel whose name you wish to alter.

Once again select "Channel data" followed this time by

"Change Channel Name".

ENTER

You can alter the name of the channel using the

buttons

to select both characters and numbers. Move the cursor using

the

keys. The maximum number of characters which

can be entered is ten.

The new name of the channel can be stored using the

ENTER button.

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.6 Changing Channel Parameters

8.6.1. Video Menu:

To change the present video parameters first press the VIDEO

button on the RCU. The video menu appears on the screen.

Now you can change the following parameters:

"IF tune"

"B/W"

IF (950 - 2050 MHz) which can be

keyed in directly

Video bandwidth, 18/27 MHz selec-

table. Switch to narrow (18 MHz)

for reception of weak signals.

"Level"

You can alter the video level (1 - 4) to

change the channel brightness.

"Video-Pol"

You only change the video polarisation

to "inverted" for C-band reception or for

some special decoders.

"Decoder"

If you wish to connect a decoder to your

ST 6002 S, switch to "External". Then

the coded reception signal will be sent

from the VCR/Dec. scart socket to the

decoder. The decoded signal will be sent

back to the receiver and can be picked

up at any output.

If you have chosen "External", you can

select between 4 different decoder sig-

nals depending upon the decoder being

used.

You can also switch to "External" if you

wish to throu-loop the playback of a video

recorder to your TV.

If you wish to store the changes, leave the video menu using

ENTER. If not, press CNCL.

NOTE:

The respective signal strength is also displayed on the

screen. The weaker the signal is, the greater the negative value.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.6.2 Audio Menu

To call up this menu press the AUDIO button. The following

parameters can be changed:

"B/W"

The audio bandwidth can be switched

between 150, 280 or 350 MHz.

"De-Emph"

"Pair"

You can choose between 50us, J17 and

Wegener.

If you switch it on, you can choose only

the most common audio subcarrier freq.

pairs (e.g. 7.02/7.20) as Audio A & B

frequencies. This simplifies the pro-

gramming of stereo programmes.

"Mode"

Select either mono or stereo.

"Audio A"

You can enter the Audio A fequency

either by using the

keying it in directly.

buttons or by

"Audio B"

This parameter only appears if "Stereo"

is selected.

To store audio parameters which have been changed, leave

this menu using ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.6.3 Skew Menu

"Skew"

If you wish to fine tune the polarity, you

can alter the current of the polariser from

-45 mA to +45 mA until you receive a

picture of optimum quality. The display

of the signal strength may also help you.

"Format"

"LNB"

Vertical:

vertical or right circ. polarisation

Horizontal:

horizontal or left circ. polarisation

LNB1 = 11 GHz frequency range

LNB 2 = DBS and 12 GHz frequency

range

If you have connected a V/H-LNB, only the format switch is

activated. To store the present data, press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

8.7 Menu Overview: Main Menu

ENTER

VIDEO

AUDIO

SKEW

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Channel Programming:

Ch.Nr. Programme

ZF MHz

MODE

Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar

Panda/Weg. 1 NO

Satellite

LNB-Sp.

PRO 7

1.406 7,02

1.229 6,50

1.288 6,50

1.523 7,02

1.494 7,02

1.347 7,02

1.582 7,02

1.214 7,02

1.259 7,20

1.421 7,02

1.464 7,02

1.318 7,02

1.377 7,02

1.627 6,50

1.391 7,02

7,20 STEREO 150

D-4

D-3

D-2

D-4

Ver

Hor

Ver

Hor

Ver

Hor

Ver

VER

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

ASTRA

11 Ghz 14V

RTL

7,02 MONO

280

50 µs

SAT. 1

50 µs

DSF

7,20 STEREO 150

Panda/Weg

ARD 1 PLUS

3 SAT

Panda/Weg. 1 NO

NORD 3

SPORTKANAL

EUROSPORT

7,20 MONO

7,02 MONO

150

10 MTV Europe

11 PREMIERE

12 SKY ONE

13 SKY NEWS

14 CNN Int.

7,20 STEREO 150

7,02 MONO

280

50 µS

RTL 4 VERONIQUE

7,20 STEREO 150

Panda/Weg. 1 NO

LIFESTYLE, CHILDR.CH. 1.273 7,02

17 TELECLUB

1.332 6,50

1.362 7,02

1.538 7,02

1.641 6,50

1.656 7,02

1.686 6,50

964 6,50

7,02 MONO

7,20 MONO

280

150

50 µs

18 FILMNET

Panda/Weg. 1 NO

19 MTV Europe

7,20 STEREO 150

20 n-tv

7,02 MONO

7,20 MONO

7,02 MONO

280

150

280

50 µs

21 Cinemania

Panda/Weg. 1 NO

22 CNC

50 µs

979 6,50

994 6,50

1.008 6,50

1.023 6,50

1.038 6,50

1.053 6,50

1.067 6,50

1.082 6,50

1.097 6,50

1.112 6,50

1.126 6,50

1.141 6,50

1.156 6,50

1.171 6,50

1.186 6,50

39 Sky Movies Plus 1.436 7,02

7,20 STEREO 150

Panda/Weg. 1 NO

40 Movie Channel

41 Sky Sports

1.479 7,02

1.509 7,02

42 TV Asia/Sky Mov. G.1.597

43 JSTV / Child.Ch. 1.568 7,02

44 TV 3 Schwed. 1.244 6,50

45 TV 3 Daenemark 1.612 6,50

7,02

7,02 MONO

280

50 µs

46 TV 3 Norw.

47 TV 1000

48 UK Gold

49 NDR 2

1.671 6,50

1.303 6,50

1.553 6,50

1.582 7,38

1.494 7,38

7,56 STEREO 150

Panda/Weg. 1 NO

50 SWF 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Ch.Nr. Programme

ZF MHz

MODE

Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar

Satellit

LNB-Sp.

51 POWER FM

1.421 7,38

1.332 7,38

1.391 7,38

1.318 7,38

1.406 7,38

1.229 7,56

1.229 7,38

1.288 7,92

1.288 7,74

1.288 7,38

1.406 7,74

1.475 6,65

1.525 7,02

1.625 7,02

1.675 6,65

1.549 7,02

1.600 7,02

1.809 7,38

1.942 7,38

1.774 7,02

1.841 7,02

1.908 6,65

1.975 6,65

1.475 7,38

1.675 7,02

1.675 7,74

1.809 7,02

1.809 7,89

1.841 7,38

7,56 STEREO 150

Panda/Weg. 1 NO

D-4

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

ASTRA

KOP

11 Ghz 14V

11 GHz 14V

12 Ghz 18V

11 GHz 14V

12 GHz 18V

53 RADIO LUX. INT.

54 SKY RADIO

55 STAR SAT RADIO

56 DTSCH. WELLE I

57 DTSCH. WELLE I

58 DLF III

6,50 MONO

7,56 MONO

7,74 MONO

7,92 MONO

150

DEUTSCHLANDF.II

DEUTSCHLANDF.I

RADIOROPA INFO

7,56 STEREO 150

7,92 STEREO 150

62 SAT 1

7,02 MONO

280

50 µs

63 3 SAT

7,20 STEREO 150

Panda/Weg. 3 NO

KOP

64 ARD 1 Plus

65 RTL

KOP

7,02 MONO

280

50 µs

KOP

66 ARTE

7,20 STEREO 150

7,56 STEREO 150

7,20 STEREO 150

Panda/Weg. 3 NO

KOP

67 Vox

KOP

68 PRO 7

KOP

69 DSF

KOP

70 n-tv

KOP

71 Premiere

72 West 3

73 Bayern 3

74 StarSat Radio

75 RTL Radio

76 Buchm. Infos

77 Radio Melodie

78 ISS

KOP

7,02 MONO

280

50us

KOP

7,56 STEREO 150

7,20 STEREO 150

Panda/Weg. 3 NO

KOP

7,92 MONO

150

KOP

7,20 STEREO 150

8,00 STEREO 150

7,56 STEREO 150

7,20 STEREO 150

KOP

79 Klassik Radio

KOP

80 RADIOROPA-INFO 1.908 7,02

KOP

81 FM-Test-U-Musik

82 FM-Test-U-Musik

83 Spor. Überspiel.

84 RETE 4

.975 7,68

7,83 MONO

7,68 MONO

7,02 MONO

150

280

150

280

KOP

1.975 7,83

975 6,60

KOP

50 µs

Intelsat 602 11 GHz 14V

Intelsat 604 11 GHz 14V

1.011 6,60

1.137 6,60

1.173 6,60

990 6,80

85 Italia 1

86 Canale 5

87 IRIB TV2

88 IRIB TV1

1.155 6,80

972 6,80

89 TRT 4

90 TRT 3

1.136 6,80

1.650 6,80

1.685 6,80

1.010 6,65

1.136 8,28

1.650 8,28

1.685 8,28

1.525 6,65

91 TRT 1

92 TRT 2

93 Bayern Journal

94 TRT Radio

95 Holiday Radio

96 Holiday Radio

97 Spor. Überspiel.

Panda/Weg. 3 NO

50µs

Digital

50µs

Kop.2

11 GHz 14V

12 GHz 18V

98 Wir in Niedersachsen 1.875 6,65

99 Nord Live 1.942 6,65

100 Schaltst. Berlin 3 1.908 6,65

101 Schaltst. Berlin 3 1.975 6,65

102

1.554 6,60

972 6,60

Eutelsat II-F3 11 GHz 14V

103 Antena 3 TV

104 Tele 5 Espana

105 CanalPlusEsp.

1.095 6,60

1.180 6,60

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

K.Nr. Programm

ZF MHz

MODE

Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar

Satellit

LNB-Sp.

106 RTP Internac.

1.575 6,60

7,02 MONO

280

150

50µs

D-4

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

Ver

Hor

linksdr.

Eutelsat II-F3 11 GHz 14V

Eutelsat II-F3 12 GHz 18V

Eutelsat II-F3 11 GHz 14V

Eutelsat II-F1 11 GHz 14V

Eutelsat II-F1 12 GHz 18V

Eutelsat II-F1 11 GHz 14V

Eutelsat II-F2 11 GHz 14V

Eutelsat I-F4 11 GHz 14V

107 TV 7 (Tunesienne) 1.659 6,60

108 Business-TV

1.772 6,60

972 7,20

972 7,38

109 Onda C.Musica

110 SER 40 Pricipales

Panda/Weg. 3 NO

7,56 STEREO 150

111 SER Convencional 972 7,74

7,02 MONO

150

280

112 TV-Ton

113 Eurosport

114 RTL 2

972 7,92

972 7,20

1.095 6,65

50µs

115 TRT/Red Hot Dutch 1.180 6,60

116 mbc

1.554 7,02

987 7,20

7,20 STEREO 150

Panda/Weg. 3 NO

117 SuperChannel

118 TV 5 Europe

119 DW-Fernsehen

120 Euronews

7,02 MONO

7,20 MONO

7,02 MONO

7,20 MONO

150

280

150

1.080 6,60

1.163 6,65

1.575 6,65

1.659 6,60

1.772 6,60

50µs

121 TV 5 Europe

122 VISEUROPE

123 Neuapost. Kirche 1.819 6,65

124 TV Sport

125 Dtsch.Welle

126 VOA-Europe

127 TVE 1

1.834 5,80

1.163 7,02

1.163 7,38

1.080 6,60

1.149 6,60

1.596 6,60

972 6,60

Panda/Weg. 3 NO

7,56 STEREO 150

7,02 MONO

280

350

280

50µs

J17

128 TVE int.

129 ON

130 RAIUNO

131 RAIDUE

132 Show TV

133 Star 1

1.095 6,60

1.575 6,65

1.617 6,65

J17

50µs

134 Rad. Point of Sale 1.617 7,38

7,56 STEREO 150

Panda/Weg. 3 NO

135 RTV Beograd

136 ITN / WTN

137 E.P.T.-ET 1

138 RIK Nikosia

139 Radio Beograd

140 TV 4 Swed.

141 TV 5 Nordic

1.178 6,65

1.510 6,60

1.554 6,60

1.594 6,60

1.178 7,02

1.457 7,02

1.725 6,50

7,02 MONO

7,20 MONO

280

150

50µs

Panda/Weg. 3 NO

7,20 STEREO 150

Tele x

12 GHz 18V

7,02 MONO

6,40 MONO

280

150

280

150

280

50µs

linksdr. Tele x

142 Radio Sweden Int. 1.457 7,38

Panda/Weg. 3 NO

143 NorNet

969 6,60

1.016 6,60

1.013 6,60

1.174 6,60

1.595 6,60

1.016 7,56

50µs

Hor.

Ver.

Hor.

Ver.

Hor

Intelsat 512 11 GHz 14V

Telecom 2B 12 GHz 18V

Telecom 2A 12 GHz 18V

144 TV Norge

145 TV3 Israel

146 TV2 Israel

147 TV1 Israel

148 Radio Limelight

Panda/Weg. 3 NO

149 Radio NordseeInt. 1.016 7,74

150 M 6

1.772 5,80

1.814 5,80

1.898 5,80

1.940 5,80

1.982 5,80

J17

151 France 2

152 Canal Plus

153 TF 1

154 Canal J

155 Rad. Mosquetaire 1.772 6,40

7,25 STEREO 280

8,20 STEREO 280

156 Europe 1

157 Resonances

158 RMC

1.772 6,85

1.898 6,40

1.898 6,85

Hor

8,20 MONO

280

Ver.

Hor.

8,20 STEREO 280

159 MCM Euro musique 1.796 5,80

160 Planete 1.838 5,80

6,40 MONO

280

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

K.Nr. Programm

ZF MHz

MODE

Audio ZF Demph. V-Pgl Dec-VIDEO Dec. MODUS Polar

Satellit

LNB-Sp.

161 Cine Cinetti

162 Canal Plus

163 France 2

164 Canal Plus

165 RTL

1.880 5,80

1.772 5,80

1.814 5,80

1.898 5,80

997 0,00

6,40 MONO

280

J17

D-4

D-1

D-4

D-1

D-4

Hor.

Ver.

Hor

Telecom 2A 12 GHz 18V

0,00 STEREO Digital

7,20 STEREO 150

TV-SAT

TDF

12 GHz 18V

166 SAT.1

1.073 0,00

1.150 0,00

1.304 0,00

977 0,00

167 3 sat

168 ARD Eins Plus

169 MCM

170 Canal plus franz. 1.054 0,00

TDF

171 arte

1.131 0,00

1.284 0,00

1.419 7,02

1.016 6,60

1.055 7,02

TDF

172 Antenne 2

173 RAISAT

174 Brightstar

175 Bravo

TDF

Panda/Weg. 3 NO

50µs NO

Panda/Weg. 3 NO

Olympus

7,02 MONO

280

Hor.

Ver.

Hor

Intelsat 601 11 GHz 14V

7,20 STEREO 150

176 Parliamentary Ch. 1.095 6,65

177 Childrens Ch. 1.135 6,65

178 Kindernet/Discovery1.175 7,02

7,02 MONO

280

50µs

7,20 STEREO 150

Panda/Weg. 3 NO

179 BBC World

180 CNN

995 6,65

1.155 6,65

1.470 6,65

1.515 6,60

1.562 6,65

995 7,02

7,02 MONO

7,20 MONO

7,02 MONO

7,20 MONO

6,80 MONO

0,00 MONO

6,80 MONO

7,02 MONO

280

150

280

Digital

280

150

50µs

181 EBU

50µs

182 Bright Star

183 SSVC TV

184 BBC for Europe

185 BBC Foreign 2

186 BBC Foreign 3

187 BBC (tsch.slow.)

188 CNN Radio

189 BFBS

190

50µs

Panda/Weg

50us

995 7,20

995 7,38

995 8,10

1.155 6,30

1.562 7,02

1.479 6,60

1.515 6,20

1.560 0,00

1.596 6,20

1.639 6,20

1.675 6,20

1.000 6,20

960 6,20

PanAmSat

ASTRA

11 GHz 14V

191 Galavision

192 DigitalServices

193

50us

Hor

50µs

Hor

194

Hor

195 NHK

Hor

196 NHK

Hor

197

Hor

198

Hor

199

1.229 7,38

Panda/Weg. 1 NO

Ver

200 RADIOROPA-INFO 1.406 7,74

7,92 STEREO 150

Ver

ASTRA

02.93

Panda/Weg = Panda/Wegener kompatibel

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

10 Technical Specifications

Tuner

Input frequency:

Input impedance:

Input level:

Input Connector:

LNB Power:

950-2050 MHz

75 Ohm

-60dBm to -30dBm

F-Type

+18/+14V DC 400mA max.

short circuit protected

27 MHz, 18 MHz

AGC

Bandwidth:

Gain Control:

Tuning:

PLL frequency synthesized

Video Output

Deemphase:

Bandwidth:

CCIR REC: 405-1, 625 Lines

5 MHz

Ed Rejection:

Level:

Output Connector:

Level Control:

40 dB min.

1 Vss an 75 Ohm/1 Vpp into 75 Ohm

Scart, Cinch

four levels

Decoder Output

non de-emphasized,unfiltered,

unclamped, B/B

de-emphasized,unfiltered,

unclamped, B/B

de-emphasized,filtered

unclamped, Video

de-emphasized,filtered,

clamped, Video

Bandwidth:

10.5 MHz

Output level:

d1 0,4Vss an 75 Ohm

d2-d4 1 Vss an 75 Ohm/

d1 0,4Vp-p into 75 Ohm

d2-d4 1Vp-p into 75 Ohm

Scart and Phono

Output Connector:

Output Impedance:

75 Ohm

Download from Www.Somanuals.com. All Manuals Search And Download.

Te c hniSa t ST 6002 S

Audio

Frequency Range:

Mode:

5.0 bis/to 8.8 MHz adjustable

Mono/Stereo selectable

Bandwidth:

150/ 280/ 350 kHz switchable

50µS/ J17/ Panda Wegener kompatibel

20 Hz bis/to 15 kHz +/- 2dB

3 Vss an 600 Ohm: 50µS/WP

2 Vss an 600 Ohm: J17/

3 Vp-p by 600 Ohm: 50us/WP

2 Vp-p by 600 Ohm: J17

Scart, Cinch (L,R)

Deemphase:

Frequncy response:

Output level:

Output connector:

Level control:

8 steps and mute

Stereo Audio 4 Pairs:

7.02 & 7.20, 7.38 & 7.56,

7.74 & 7.92, 8.10 & 8.28

6.50, 6.65, 7.02, 7.20, 7.38,

7.56, 7.74, 7.92, 8.10, 8.28

10 Mono Audio choices:

HF Modulator

UHF Channel 35-44, preset to channel 39, Pal G, 1 switchable

output level:

output connector:

Ant. input connector:

75 +/-4dBµV

IEC Male

IEC Female

Polarizer

V/H Typ:

Ferrit- Polariser:

+14V/+18V max. 400mA

+/-45mA an/by 82 Ohm

Others

Supply voltage:

220V 50Hz, 240V 50Hz (Option)

Technical specifications are subject to change without notice!

Download from Www.Somanuals.com. All Manuals Search And Download.

® TechniSat ist ein eingetragenes Warenzeichen der

TechniSat Satellitenfernsehprodukte GmbH, TechnicPark, W-5568 Daun

Download from Www.Somanuals.com. All Manuals Search And Download.

Technika Flat Panel Television LCD19 915 User Manual
Thermador Oven SMW272 User Manual
Toshiba DVD VCR Combo MW24FM1 User Manual
Trane Fan 4TTB4 User Manual
Universal Power Group Battery Charger 2A 10A User Manual
Valcom Computer Hardware VIP 822 User Manual
Victory Refrigeration Freezer FS 1D S7 EW User Manual
ViewSonic Computer Monitor A90F+ User Manual
ViewSonic Digital Photo Frame DF87G 533 User Manual
Vizio Flat Panel Television E320IA0 User Manual