77-20DX220I0420
Z
-
TD X250i
Micro Hi-Fi System
OWNER’S MANUAL
Includes adapters for:
iPod nano
iPod with video
iPod mini
iPod with Click Wheel
iPod with color display
Adapters sold separately:
iPod with dock connector
Download from Www.Somanuals.com. All Manuals Search And Download.
< Do not expose this apparatus to drips or splashes.
Contents
< Do not place any objects filled with liquids, such as vases, on
the apparatus.
Thank you for choosing TEAC. Read this manual carefully
to get the best performance from this unit.
< Do not install this apparatus in a confined space such as a
book case or similar unit.
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 2
< The apparatus draws nominal non-operating power from the
AC outlet with its STANDBY/ON switch in the standby
position.
< The apparatus should be located close enough to the AC
outlet so that you can easily grasp the power cord plug at any
time.
< An apparatus with Class construction shall be connected to
!
an AC outlet with a protective grounding connection.
< Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
iPod
< Excessive sound pressure from earphones and headphones
can cause hearing loss.
CD/MP3
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTION
TUNER
< DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO
EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS
ARE WITHIN!
< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,
CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE
PRODUCT UNTIL IT HAS BEEN REPAIRED.
AUX
< USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products
should be disposed of separately from
the municipal waste stream via designated collection
facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using the Unit
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
Read this before operation
< As the unit may become warm during operation, always leave
sufficient space around the unit for ventilation.
The ventilation holes should not be covered. Make sure there
is at least 5 cm of space on each side of the unit. Do NOT
place anything on top of the unit.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the unit and the remote control.
< The voltage supplied to the unit should match the voltage as
printed on the rear panel. If you are in any doubt regarding
this matter, consult an electrician.
< If the remote control unit is operated near other products
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other products may also
operate incorrectly.
< Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Avoid
locations subject to vibrations and excessive dust, heat, cold
or moisture.
< Do not place the unit on any other electronic components.
Battery Installation
1
< Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should fall into
the unit, contact your dealer or service company as soon as
possible.
< When removing the power plug from a wall outlet, always
pull directly on the plug. Do not pull on the line cord.
2
3
< To keep the laser pickup clean, do not touch it and always
close the CD door after each use.
< Do not attempt to clean the unit with chemical solvents as
this might damage the finish. Use a clean, dry, lint-free cloth.
< Keep this manual in a safe place for future reference.
CAUTION: DO NOT MOVE THE UNIT DURING PLAYBACK
During playback, the disc rotates at high speeds. Do NOT lift
or move the unit during playback. Doing so may damage the
disc or the unit.
1
2
3
Remove the battery compartment cover.
Put in the lithium battery (CR2032, 3V).
Close the cover.
WHEN MOVING THIS UNIT
When changing places of installation or packing the unit for
moving, be sure to remove the disc. Moving this unit with the
disc loaded may result in malfunction or other damage.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the battery is exhausted. In this case,
replace the battery with a new one.
Precautions concerning batteries
Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
NXT is a trademark of New Transducers Ltd.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs
Discs which can be played on this unit:
< CD-R and CD-RW discs are more sensitive to the effects of
heat and ultraviolet rays than ordinary CDs. It is important
that they are not stored in a location with direct sunlight and
keep your discs away from sources of heat such as radiators
or heat-generating electrical devices.
• Conventional audio CDs bearing the COMPACT DISC
DIGITAL AUDIO logo on the label:
< Printable discs aren’t recommended because the label side
might be sticky (or contain glue), which will damage the unit.
• Properly finalized CD-R and CD-RW discs
• MP3 CDs
< Do not stick papers or protective sheets on the discs and do
Note:
not use any protective coating spray.
< Depending on the quality of the disc and/or the condition of
the recording, some CD-R/CD-RW discs may not be playable.
< Use a soft oil-based felt-tipped pen to write information on
the label side of a disc. Never use a ball-point or hard-tipped
pen, as this may cause damage to the recorded side of the
disc.
< Copy-protected discs and other discs that do not conform to
the CD standard may not play back correctly in this player. If
you use such discs in this unit, TEAC Corporation and its
subsidiaries cannot be responsible for any consequences or
guarantee the quality of reproduction. If you experience
problems with such non-standard discs, you should contact
the producers of the disc.
< Never use a stabilizer. Using commercially available CD
stabilizers with this unit will damage the mechanisms and
cause them to malfunction.
< Do not use irregular shape CDs (octagonal, heart shaped,
business card size, etc.). CDs of this sort can damage the unit:
< Always place the disc on the disc tray with the label side up.
(Compact discs can be played or recorded only on one side.)
< To remove a disc from its storage case, press down on the
center of the case and lift the disc out, holding it carefully by
the edges.
< If you are in any doubt as to the care and handling of any
disc, read the precautions supplied with the disc, or contact
the disc manufacturer directly.
How to remove the disc
How to hold the disc
MP3 compatibility
< File names of MP3 should be alphanumeric characters. This
unit cannot display symbols and full-size or 2 bytes-wide
characters (such as Japanese, Chinese, etc.) correctly. Also, be
sure to use the file extension “.mp3”.
< Should the disc become dirty, wipe the surface from the
center hole outward towards the outer edge with a soft, dry,
lint-free cloth:
< The disc must be finalized in order to play.
< The CD-ROM must be ISO 9660 compatible.
< Never use chemicals such as record (LP) sprays, antistatic
sprays or fluids, benzine or thinner to clean the discs. Such
chemicals will do irreparable damage to the disc’s plastic
surface.
< When more than 200 files or 50 folders are recorded on the
disc, the unit might not be able to play it correctly.
< The file must be mono or stereo MPEG-1 Audio Layer 3
format, 44.1 or 48 kHz, fixed bit-rate.
< Discs should be returned to their cases after each use to avoid
dust and scratches that may eventually cause your disc to
skip.
< Do not expose discs to direct sunlight, high humidity, or high
temperatures for extended periods. Long exposure to high
temperatures will warp the disc.
< Do not play any disc that is warped, scratched, deformed or
damaged. Playing such discs may cause irreparable harm to
the playback mechanism.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
CAUTION
< Turn off the power of all the equipment before making connections.
< Read instructions of each component you intend to use with this unit.
< Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection
cords with the power cord.
Speaker (R)
Speaker (L)
D
D
F
E
Subwoofer
A
B
C
Side panel of the main unit
6
Download from Www.Somanuals.com. All Manuals Search And Download.
A
D
AM loop antenna
SPEAKERS
Position the antenna for the best sound.
If you want, you can hook the AM antenna on a wall as
shown below:
Connect the left speaker’s plug to L, and the right speaker’s
plug to R.
< If not using the included speakers, make sure the speakers
you use are at least 4 Ω impedance.
< Do not connect anything other than speakers to these
terminals.
E
AC Power Cord
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord. Never pull or yank on the power cord.
B
FM antenna
While in FM mode, tune in an FM station and extend the
lead to find the best position for reception. This antenna
may need to be repositioned if you move your unit to a new
location.
F
POWER switch of the Subwoofer
Use this switch to turn the system on or off.
FM Outdoor Antenna
The equipment draws a nominal amount of power from
the AC outlet even with its POWER switch in the OFF
position.
In an area where FM signals are weak, it will be necessary to
use a 75-ohm unbalanced-type outdoor FM antenna using
an optional (not supplied) matching transformer connected
to an external antenna. Generally, a 3-element antenna will
be sufficient; if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5 or
more elements.
< If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
To avoid loosing your settings, it is advisable to keep this
switch ON when not in use.
Outdoor FM Antenna (75Ω)
G
AUX IN
You can connect a portable audio player to this jack.
Connect the LINE OUT or PHONES jack (audio output jack)
of the player using the supplied stereo mini plug cable.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no
sound from your TD-X250i.
C
Subwoofer
Connect the “TO SUBWOOFER” and the “FROM MAIN”
sockets using the supplied cable.
< Connect the Connectors in the direction as figured.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall Mounting
You can mount the left and right speakers on a wall.
To hook on the wall
1. Fix the brackets on the rear panel of the speakers using
the supplied short screws.
Precautions
< Be aware that the length of the cables are approximately 3 m.
Do not attempt to mount the speakers too far from the
subwoofer.
< Drill holes into solid wall support, such as wooden frame or
concrete wall.
< TEAC supplies these brackets as a convenience to the product
owner. Consult your local building codes and exercise all
necessary caution when mounting these brackets. If you are
unsure how to use the supplied brackets, consult with a local
tradesmen or building supply expert.
2. Use the supplied guide sheet to mark the exact drilling
points on the wall.
3. Drill holes in the wall at the marked points.
4. Screw the supplied long screws into the wall.
Leave about 5 mm space between the screw’s head and the
wall.
< As a convenience, a set of tapered plastic anchors is supplied.
If you chose to use these anchors, drill a pilot hole using a 6
mm drill bit then tap the anchor into the pilot hole.
Only use these anchors if they are appropriate for the
materials onto which the unit is to be mounted. Consult your
local hardware store if you are uncertain.
5.Before going on, connect the speakers and the
subwoofer using the supplied speaker cables (see page
6-7).
6. Carefully hang the speakers onto the screws.
Note:
Ensure that the speaker locks onto the hooks and that the
hooks are strong enough to support the weight before
removing your hands.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
The TD-X250i comes mounted with an adapter for iPod with
3. Insert the adapter into the Dock of the TD-X250i.
color display (40GB, 60GB), “60GB (color) + Photo 40GB/60GB”.
To play your iPod through the TD-X250i, you have first to check
if the factory mounted adapter fits your model of iPod. If it does
not, you have to replace it with a correct one, as explained
below.
Fit the front edge of the adapter into the Dock, and then
press the back edge of the adapter onto the Dock until a
slight “click” is heard indicating the adapter is inserted
correctly.
1
1. Remove the adapter from the Dock of the TD-X250i.
Hold the left and right sides of the adapter and gently pull it
up.
2. Choose the Dock adapter that fits your iPod mobile
digital device.
2
“Video 30GB” for iPod with video (30 GB).
“Video 60GB/80GB” for iPod with video (60 GB, 80 GB).
“nano” for iPod nano.
< When you need to remove the adapter, hold the left and
right sides of the adapter and gently pull it up.
“mini” for iPod mini.
< When you don’t use the Dock, use the supplied cover for the
Dock to prevent dust from settling on the Dock.
“20GB (color) + Photo 30GB” for iPod with color display
(20GB, 30GB, U2 Special Edition).
“60GB (color) + Photo 40GB/60GB” for iPod with color
display (40GB, 60GB).
Compatible iPod Software
In case your iPod will not work with the TD-X250i or with the
remote control unit, software update may solve the problem.
Visit the Apple website and download the latest iPod Software.
“20GB + U2” for iPod with Click Wheel (20 GB, U2 Special
Edition).
“40GB” for iPod with Click Wheel (40 GB).
< Use a commercially available adapter to play iPod with dock
connector (with four buttons under the display).
iPod is a trademark of Apple Computer, Inc., registered in the
U.S. and other countries.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Functions
A
B
C
D
E
F
G
H
I
J
K
L
P
O
M
N
H
G
J
U
V
C
D
E
Q
W
R
A
B
L
S
T
M
K
Note:
X
To simplify explanations, instructions in this manual refer to
the names of the buttons and controls on the front panel
only. Associated controls on the remote control will also
operate similarly.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A
L
SKIP (.//) / TUNING
STOP (H)
In iPod or CD mode, momentarily press this button to skip
tracks. Hold down this button to search for a part of a track.
In TUNER mode, momentarily press this button to tune in
stations.
In CD mode, use this button to stop playback.
< This button doesn’t work in iPod mode.
M
VOLUME
In Standby mode, these buttons are used to set or adjust the
clock and the timer.
Press the up “+” or the down “–” button to adjust the
volume.
B
C
PLAY/PAUSE (y/J)
N
Dock connector
In iPod or CD mode, use this button to start or pause
playback.
Before use, insert an appropriate Dock adapter in the Dock
(see page 9).
Insert an iPod mobile digital device into this dock.
MP3/RDS
During playback of a MP3 disc, use this button to search track
name.
In FM TUNER mode, use this button to select an RDS mode.
O
P
CD door
Remote Sensor
When operating the remote control unit, point it towards
here.
D
E
REPEAT/PTY
In iPod or CD mode, use this button to set the repeat
function.
In FM TUNER mode, use this button to start PTY search.
Q
PRESET/SCROLL
In TUNER mode, use these buttons to select a preset station.
In iPod mode, use these buttons to scroll up and down the
menu.
During playback of a MP3 disc, use these buttons to select a
folder in the disc.
SHUFFLE/FM MODE
In iPod or CD mode, use this button to turn on and off the
shuffle playback.
In FM TUNER mode, use this button to select STEREO or
MONO.
R
MENU
This button is equivalent to the MENU button on your iPod.
In iPod mode, use this button to go back to the previous
menu.
F
Display
G
STANDBY/ON
Use this button to turn the unit on or standby.
The main unit is powered via the subwoofer. You need to first
turn on the subwoofer.
S
T
TREBLE
Use this button and the VOLUME buttons to adjust the level
of high frequency sound range.
When the main unit is in the standby mode, the power
indicator of the Subwoofer is orange.
When the unit is turned on, the indicator turns blue.
BASS
Use this button and the VOLUME buttons to adjust the level
of low frequency sound range.
The equipment draws a nominal amount of power from the
AC outlet even with its STANDBY/ON switch in the
STANDBY position.
U
V
SLEEP
Use this button to set sleep timer.
TIMER
Use this button together with the SKIP buttons to set the
timer.
H
I
FUNCTION
Use this button to select a source (iPod, CD, TUNER or AUX).
W
SELECT
OPEN/CLOSE
This button is equivalent to the Center button on your iPod.
In iPod mode, use this button to confirm selection in menus.
In CD mode, use this button to open and close the CD door.
J
FM/AM
X
MUTING
Use this button to select AM or FM.
Use this button to mute the sound.
K
MEMORY/TIME SET
In CD mode, use this button to program tracks.
In TUNER mode, use this button to preset stations.
This button is also used for clock adjustment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
(Rear panel of the subwoofer)
3
Select a source by pressing the FUNCTION button.
2
3
4
1
1
Turn on the subwoofer.
2
Press the STANDBY/ON switch on the main unit.
< To listen to an external source connected to the AUX IN jack,
select AUX.
< In iPod and AUX modes, the display always shows the clock.
< If you press and hold the TIME SET button for 2 seconds in
CD or TUNER mode, the clock will be displayed for a few
seconds.
4
Play the source and adjust the volume using the
VOLUME buttons.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Muting
Sleep Timer
To mute the sound temporarily, press the MUTING button.
Press the MUTING button again to restore the sound.
Repeatedly pressing the SLEEP button permits setting an
interval (from 90 down to 10 minutes) after which you want
the unit to automatically turn off and shift into Standby
mode.
Each press of the SLEEP button changes the time indication by
10 minutes.
< While muting is engaged, “MUTING” blinks on the display.
< If you change the volume during the muting, the muting will
be canceled.
………
10
90
80
(off)
Headphones
Tone Control
For private listening, first reduce the volume level to
minimum. Then insert the plug from your headphones into
the PHONES jack, and adjust the volume using the VOLUME
buttons. The sound from the speakers is cut off while the
headphone jack is inserted.
1. Press the BASS or TREBLE button.
To adjust the level of low frequency sound range, press the
bass button.
To adjust the level of high frequency sound range, press the
treble button.
2. Within 5 seconds, press the VOLUME buttons to change
the setting.
The level can be adjusted from –4 to +4.
CAUTION
Always lower the volume level prior to plugging in your
headphones. TO AVOID DAMAGING YOUR HEARING - Do
not place your headphones on your head until after you have
plugged them in.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to iPod
Insert the iPod into the Dock of the TD-X250i.
Then press the Play/Pause button (y/J) on the iPod. The
TD-X250i will automatically turn on and start playback
from the iPod’s music list.
To suspend playback temporarily
(pause mode)
Press the Play/Pause button (G/J) during playback. Playback
stops at the current position. To resume playback, press the
Play/Pause button (G/J) again.
< If the iPod that is in playback mode is inserted into the Dock,
the TD-X250i will automatically turn on and start playback of
the iPod.
< Make sure to use an appropriate Dock adapter (see “Getting
started” on page 9).
To skip to the next or a previous track
During playback, press the skip button (. or/ )
repeatedly until the desired track is found. The selected track
will be played from the beginning.
< The battery of the iPod is recharged to the full whenever the
iPod is docked and the TD-X250i is connected to the AC
power supply.
< When the . button is pressed during playback, the track
being played will be played from the beginning. To return to
the beginning of the previous track, press the . button
twice.
< When headphones are plugged into the iPod, sound comes
from both the speakers of the TD-X250i and the headphones.
< The Stop button (H) doesn’t work in iPod mode.
Search for a part of a track
During playback, hold down the skip button (.or/) for
more than 2 seconds and release it when the part you want
to listen to is found.
To select iPod mode
Select “iPod” using the FUNCTION button. If an iPod is
already docked, playback will start.
When no iPod is docked, the iPod indicator on the display
blinks.
In iPod mode, press the Play/Pause button (G/J) to start or
pause playback.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To go back to the previous menu
To activate the shuffle mode
Press the MENU button to go back to the previous menu.
This button is equivalent to the MENU button on your iPod.
During playback, press the SHUFFLE button to change the
shuffle mode.
Each time the SHUFFLE button is pressed, the SHUFFLE setting
of iPod is changed as follows:
songs
albums
off
Select the menu item
If iPod is set to shuffle songs or albums, the Shuffle icon (
appears in the iPod’s display.
)
Press the PRESET/SCROLL buttons (‡/°) to scroll to the
menu item you want, and then press the SELECT button.
To activate the repeat mode
During playback, press the REPEAT button to change the
repeat mode.
Each time the REPEAT button is pressed, the REPEAT setting
of iPod is changed as follows:
One
All
off
If the iPod is set to repeat one song, the Repeat One icon
appears in the iPod’s display.
(
)
)
If the iPod is set to repeat all songs, the Repeat icon (
appears in the iPod’s display.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to CD/MP3
< It takes a few seconds for the unit to load the disc. No
buttons will work during loading. Wait until the total number
of the tracks and the total play time of the disc are displayed.
5
1
< When no disc is loaded in the CD player, “NO DISC” is
displayed.
3
2 4
When a CD is loaded
1
2
3
Press the FUNCTION button to select “CD”.
total tracks
total playing time
When a MP3 disc is loaded
Press the OPEN/CLOSE button.
total number
of folders
total tracks
5
Press the Play/Pause button (y/J) to start playback.
Put a disc onto the center spindle of the player with the
label side facing you.
Press the disc onto the spindle until a slight “click” is heard
indicating the disc is mounted correctly.
CD
current track number
elapsed time of current track
MP3
current folder
number
< Never put more than one disc in the mechanism at a time.
< Ensure that the disc is correctly mounted on the spindle and
locked in place.
current track number
elapsed time of current track
Playback starts from the first track of the disc.
4
Press the OPEN/CLOSE button to close the CD door.
< MP3 tracks recorded out of folders are automatically put in
the “ROOT” folder, and playback starts from the first track of
the ROOT folder.
< When the playback of all the tracks has finished, the unit
stops automatically.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To display MP3 information
During playback of an MP3 disc, press the MP3 button for
more than 1 second. The information about the current track
is displayed as follows:
To suspend playback temporarily
(pause mode)
Press the Play/Pause button (G/J) during playback. Playback
stops at the current position. To resume playback, press the
Play/Pause button (G/J) again.
Filename w Title w Artist w Album
< NONE appears when there is no information.
< UNKNOWN appears when the unit cannot read the
information.
To stop playback
Press the Stop button (H) to stop playback.
Press the MP3 button for more than 1 second again to cancel
the MP3 information mode.
To skip to the next or a previous track
During playback, press the skip button (. or/ )
repeatedly until the desired track is found. The selected track
will be played from the beginning.
Select a folder on the MP3 disc
Press the PRESET/SCROLL button to select a folder.
In the stop mode, press the skip button (. or/)
repeatedly until the track you want to listen to is found. Press
the Play/Pause button (G/J) to start playback from the
selected track.
< When the . button is pressed during playback, the track
being played will be played from the beginning. To return to
the beginning of the previous track, press the . button
twice.
< During programmed playback, the next or previous track in
the program is played.
Search for a part of a track
During playback, hold down the skip button (.or/) and
release it when the part you want to listen to is found.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Mode (MP3 only)
MP3
3
Press and hold the SKIP button (. or /).
Search for a name of track
You can select the track by searching for its name.
1
Press the MP3 button once.
An alphabet (initial letter of a track name) and a track name
are displayed.
Track name
Track number
Then you can select the track that has same initial letter by
pressing the SKIP button (. or /).
Initial letter of track name
< To cancel the search mode, press the STOP button (H).
4
Press the PLAY/PAUSE button (G/J).
Playback starts from the selected track.
2
Select the initial letter of the track you want to listen to
by pressing the SKIP button (. or /).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Shuffle Playback
Search for a track in a folder
1
Press the MP3 button twice.
The tracks can be played randomly. Press the SHUFFLE button
during playback or when in the stop mode. “SHUFFLE” will
then light up in the display.
< If you press the / button during shuffle playback, next
track will be randomly selected and played.
If you press the . button, the currently played track will be
played from the beginning. If you press the . button twice
or more, next track will be randomly selected and played.
A track cannot be replayed during shuffle playback.
The name of folder is displayed.
< MP3 tracks recorded out of folders are in the “ROOT” folder.
2
Press the SKIP button (. or /) to find the folder
that the track you want to listen to is included.
< Shuffle playback doesn’t work during programmed playback.
< If one of the following buttons is pressed, shuffle mode will
be cancelled:
SHUFFLE, STOP, FUNCTION, FM/AM
STANDBY/ON, OPEN/CLOSE
3
Press and hold the SKIP button (. or /).
Then you can select the track in the folder by pressing the
SKIP button (. or /).
4
Press the PLAY/PAUSE button (G/J) to start playback.
Playback starts from the selected track.
3
< If you skip step , playback will start from the first track in
the selected folder.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Playback
FUNCTION
MEMORY
Up to 64 tracks can be programmed in the desired order.
1
4
Press the Skip button (.or/) repeatedly to select a
track, then press the MEMORY button.
Press the FUNCTION button to select “CD”.
2
Press the MEMORY button.
CD
MP3
CD
MP3
The track is programmed, and “P-02” is displayed.
3
4
< Repeat steps and to program more tracks.
< You can program up to 64 tracks.
“MEMORY” lights up in the display.
< To cancel the program mode, press the Stop button (H).
5
When the selection of track numbers is completed,
press the Play/Pause button (G/J) to start program
playback.
3
Press the Skip button (.or/) repeatedly to select a
folder of a MP3 disc, then press the MEMORY button.
< MP3 tracks recorded out of folders are in the “001” (ROOT)
folder.
< Skip this step when playing a CD.
< When the playback of all the programmed tracks has finished,
or if you press the Stop button (H), the MEMORY indicator
will go off and the program mode will be cancelled. Still the
program is retained in memory.
You can return to the programmed playback by pressing the
MEMORY button and the Play/Pause button (G/J).
MP3
< Shuffle function doesn’t work during programmed playback.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To check the programmed order
To clear program
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the
display.
To clear the programmed contents, press the MEMORY and
the STOP button (H) in the stop mode.
< If one of the following buttons is pressed, the programmed
contents will also be cleared:
OPEN/CLOSE, FUNCTION, FM/AM, STANDBY/ON
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until
“00” appears on the display. Select a track number using the
Skip button (.or/) and then press the MEMORY
button. The track is added to the end of the program.
< If the unit is disconnected from the power supply, the
programmed contents will be cleared.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until
the program number to be changed appears on the display.
Select a new track number using the Skip button (.or/)
and then press the MEMORY button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Playback
Every time the REPEAT button is pressed, the mode is
changed as follows:
Repeat one track
Press the REPEAT button once during playback. “REPEAT”
lights.
The track being played will be played repeatedly. If you press
the Skip button (.or/) and select another track, the
track you selected will be played repeatedly.
When a CD is loaded:
REPEAT
REPEAT ALL
(off)
It is also possible to select a track to be repeated in the stop
mode. Press the REPEAT button, select a track using the Skip
button (.or/), and then press the Play/Pause button
(G/J) to start playback.
When a MP3 disc is loaded.
REPEAT REPEAT ALL REPEAT ALBUM
(off)
< If one of the following buttons is pressed, repeat mode will
be canceled:
Repeat all the tracks
STOP, FUNCTION, FM/AM, OPEN/CLOSE, STANDBY/ON
All the tracks will be played repeatedly.
Press the REPEAT button twice. “REPEAT ALL” lights.
During programmed playback, programmed tracks will be
played repeatedly.
Repeat all the tracks in the folder (MP3)
All the tracks in the folder will be played repeatedly.
Press the REPEAT button three times. “REPEAT ALBUM”
lights.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Radio
FM MODE button
Pressing this button alternates between STEREO mode and
MONO mode.
1
2
3
1
Press the FUNCTION button to select “TUNER”.
STEREO
FM stereo broadcasts are received in stereo and the
“STEREO” indicator lights in the display.
< You can also use the FM/AM button to select “TUNER”.
< If the sound is distorted and the “STEREO” indicator flashes,
the signal is not strong enough for good stereo reception. In
this case, change to MONO mode.
2
Press the FM/AM button to select a band.
MONO
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced to monaural, reducing
unwanted noise.
3
Select the station you want to listen to (auto selection).
If the reception is poor
AM broadcast
Rotate or relocate the AM antenna to find the best position
for AM stations.
FM broadcast
Hold down the TUNING Up or Down button until the
frequency display begins to change. When a station is tuned
in, the tuning process will stop automatically.
Extend and rotate the FM antenna until you receive the
stations clearly. You may need to relocate the unit.
< Press the Up or Down button to stop the auto selection.
Selecting stations which cannot be tuned automatically
(manual selection)
When the Up or Down button is pressed momentarily, the
frequency changes by a fixed step.
Press the Up or Down button repeatedly until the station you
want to listen to is found.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Tuning
You can store FM and AM stations into preset channels 1 to 10
respectively.
How to select preset stations
1
Press the FM/AM button to select a band.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
1
2
1
Tune in a station you want to listen to (see steps
to
3
of page 23).
2
Press the PRESET button repeatedly until the desired
preset station is found.
Press the MEMORY button.
3
Within 5 seconds, select a preset channel to store the
station using the PRESET buttons of the remote control
unit.
preset channel
4
Within 5 seconds, press the MEMORY button.
The station is stored and the MEMORY indicator goes off.
1
4
To store more stations, repeat steps to
.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS
RDS (PTY Search 1)
The Radio Data System (RDS) is a broadcasting service which
allows stations to send additional information along with the
regular radio programme signal.
PTY
RDS works on the FM waveband in Europe only.
FM/AM
1
2
1
3
Tune in an FM RDS station (see steps
23).
to
of page
The Programme Service name (station’s name) appears on the
display.
A station can be searched by this function.
1
Select FM by pressing the FM/AM button.
Press the RDS button.
2
Press the PTY button.
Each time the RDS button is pressed, the RDS mode is
changed as follows:
“PTY SEL” blinks on the display.
PS (Programme Service name)
When you select PS, the frequency will be displayed for 3
seconds, and then PS (station’s name) will be displayed. If
there is no PS data, “NO PS” will be displayed.
3
Within 10 seconds, select the desired PTY programme
using the SKIP button (.or/).
PTY (Programme Type)
When you select PTY, the programme type will be displayed.
If there is no PTY data, “NO PTY” will be displayed.
RT (Radio Text)
When you select RT, the news of stations composed of up
to 64 symbols will be displayed. If there is no RT data, “NO
RT” will be displayed.
You can select from 31 kinds (see page 26).
4
Press the PTY button.
Searching will start.
< When the programme that you have selected is found,
searching will stop and the programme type will be displayed.
< If the same program type is not found during PTY Search, it
will stop at the beginning frequency.
< If you want to stop searching, press the PTY button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS (PTY Search 2)
Listening to an External Source
1
Connect the PHONES jack (audio output jack) of a
portable audio player to the AUX IN jack of the TD-
X250i using the supplied stereo mini plug cable.
PTY (Programme Type)
NEWS
: brief announcements, events, public opinion,
reports, actual situations.
AFFAIRS
: a kind of suggestion including practical
announcements other than news, documents,
discussion, analysis and so on.
INFO
: daily information or reference such as weather
forecast, consumer guide, medical assistance and
so on.
SPORT
: sports related programs.
EDUCATE : educational and cultural information.
DRAMA : all kinds of radio concert and serial drama.
CULTURE : all aspects of national or local culture including
religious events, philosophy, social science,
language, theatre, and so on.
SCIENCE : programs on natural science and technology
VARIED
: popular programs such as quiz, entertainment,
private interview, comedy, satire and so on.
: program on commercial, practical and popular
songs, and sale volume of discs, etc.
POP M
ROCK M : practical modern music generally composed and
played by young musicians.
M O R M : popular music usually lasting for less than 5
minutes.
2
Press the FUNCTION button to select “AUX”.
LIGHT M : classical music, instrumental music, chorus, and
light music favored by non-professionals.
CLASSICS : orchestra including great operas, symphony,
chamber music and so on.
OTHER M : other music styles(Rhythm & Blues, Reggae, etc.)
WEATHER : weather reports, forecast
FINANCE : financial reports, commerce, trading
CHILDREN : children’s programs
SOCIAL A : social affairs
RELIGION : religious programs
PHONE IN : program in which the public expresses its view by
phone.
TRAVEL
LEISURE
JAZZ
: travel reports
: programs concerning recreational activities
: jazz music
3
Play the source, and adjust the volume using the
VOLUME buttons of the TD-X250i and the audio player.
COUNTRY : country music
NATIONAL : national music
OLDIES
FOLK M
: music from the so-called golden of popular music
: folk music
DOCUMENT: documentaries
TEST
ALARM
: a program notifying an emergency or a natural
disaster.
When using the PHONES jack of your mini player, you must
adjust the volume of the mini-player or you may hear no
sound from your TD-X250i.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock
4
Press the SKIP button (.//) to set the current
hour.
STANDBY/ON
TIME SET
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
1
If the unit is on, press the STANDBY/ON switch to turn
it standby
5
Press the TIME SET button.
The “minute” value blinks.
2
Press and hold down the TIME SET button.
6
Press the SKIP button (.//) to set the current
minute.
“12 HOUR” or “24 HOUR” blinks. If you want to change the
hour mode, press the .or/ button.
< If no button is pressed for 10 seconds, the time setting mode
will be cancelled.
3
Press the TIME SET button once more.
The “hour” value blinks.
7
Press the TIME SET button.
The clock starts.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Timer
3
Press the SKIP button (.//) to set the start time
(minute), and then press the TIMER button.
TIMER
/
< The unit can be programmed to turn on and off at a specified
time.
< Adjust the clock before setting the timer.
1
Press and hold the TIMER button until the TIMER
indicator and “ON” appear on the display.
“TIMER” and “OFF” indiactors appear on the display and the
“hour” value starts flashing.
4
Press the SKIP button (.//) to set the stop time
(hour), and then press the TIMER button.
The “hour” value starts flashing.
< When no button is pressed for 10 seconds, the timer setting
mode will be cancelled.
2
Press the SKIP button (.//) to set the start time
(hour), and then press the TIMER button.
The “minutes” value starts flashing.
5
Press the SKIP button (.//) to set the stop time
(minute), and then press the TIMER button.
The “minutes” value starts flashing.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Press the STANDBY/ON button to turn the unit off
(standby).
6
Press the SKIP button (.//) to select a source
(TUNER, CD or iPod), and then press the TIMER button.
The clock and the TIMER indicator are displayed.
The unit will turn on and off at the specified time every day.
Don’t forget to turn the unit off (standby), or the timer
won’t work.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
7
Press the SKIP button (.//) to set the volume, and
then press the TIMER button.
< Playback volume will gradually increase up to your set volume
when the unit is turned on by timer.
< If the source is set to “iPod” but no iPod is set, the unit will
turn on into TUNER mode.
< If the source is set to “CD” but no disc is set, the unit will
turn on into TUNER mode.
< When the source is set to “TUNER” and the unit turns on, it
will tune in to the station you selected last time.
Setting the timer is now completed and the timer is turned on.
Your timer setting is displayed one by one, and the TIMER
indicator lights on the display.
To turn on or off the timer
8
Prepare the source.
6
If you selected “TUNER” in step , tune in a station.
6
If you selected “CD” in step , set a disc.
6
If you selected “iPod” in step , insert an iPod.
When you don’t use the timer, press the TIMER button to
turn it off. (The TIMER indicator disappears from the display.)
Press the TIMER button again to turn it on.
< When the timer is turned on, the timer settings are displayed
one by one, and the TIMER indicator lights on the display.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have problems with your system, look through this chart
and see if you can solve the problem yourself before calling your
dealer or TEAC service center.
Tuner
Cannot listen to any station, or signal is too weak.
e Tune in the station properly.
e Rotate the FM or AM antenna for the best reception
position.
General
No power
e Check the connection to the AC power supply. Check and
make sure the AC source is not a switched outlet and that,
if it is, the switch is turned on. Make sure there is power to
the AC outlet by plugging another item such as a lamp or
fan into the outlet.
Though the broadcast is stereo, it sounds monaural.
e Press the FM MODE button.
If normal operation cannot be recovered, unplug the
power cord from the outlet and plug it again.
No sound from speakers.
e Select the source by pressing the FUNCTION button.
e Check the connection to the speakers.
e Adjust the volume.
e Pull out the headphone’s plug from the PHONES jack.
e If “MUTING” is blinking, press the MUTING button.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
The sound is noisy.
e The unit is too close to a TV or similar appliances. Install the
unit apart from them, or turn them off.
Remote control doesn’t work.
e Press the STANDBY/ON switch to turn the unit on.
e When the battery has run out, put in a new one.
e Use remote control unit within the range (5 m) and point at
the front panel.
e Clear obstacles between the remote control unit and the
main unit.
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm
place, or used after a sudden temperature change, there is a
danger of condensation; vapor in the air could condense on
the internal mechanism, making correct operation erratic or
impossible. To prevent this, or if this occurs, leave the unit for
one or two hours with the power turned on. The unit will
stabilize at the temperature of its surroundings.
e If a strong light is near the unit, turn it off.
CD Player
Will not play.
e Load a disc with the playback side facing away.
e If the disc is dirty, clean the surface of the disc.
e A blank disc has been loaded. Load a prerecorded disc.
e Depending on the disc, etc. it may not be possible to play
back CD-R/RW discs. Try again with another disc.
e You cannot play back unfinalized CD-R/RW discs. Finalize
such a disc in a CD recorder and try again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted mild liquid soap. Never spray liquid directly on this
unit. Apply your cleaner to your cleaning cloth and wipe
gently. Be sure to remove any excess completely. Do not use
thinner, benzene or alcohol as they may damage the surface
of the unit. Allow the surface of the unit to dry completely
before using.
Sound skips.
e Place the unit on a stable place to avoid vibration and shock.
e If the disc is dirty, clean the surface of the disc.
e Don’t use scratched, damaged or warped discs.
iPod Player
Cannot insert the iPod.
e Check the dock adapter.
e Remove dust or obstacles from the Dock connector of the
TD-X250i and the iPod, and insert the iPod again.
Will not play.
e Remove the iPod from the dock, wait a few seconds, and
insert it again.
e Software update may solve the problem. Visit the Apple
website and download the latest iPod Software.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Standard Accessories
AMPLIFIER section
Remote control unit (RC-1103) x 1
Battery for remote control unit x 1
Subwoofer cable x 1
Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W
Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W
Input Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mV
Frequency Response. . . . . . . . . . . . . . . . . . . 50 to 20,000 Hz
Speaker cable x 2
FM antenna x 1
AM antenna x 1
Stereo mini plug cable x 1
TUNER Section (FM)
Frequency Range . . . . . . . . . . . . . . . . . 87.50 to 108.00 MHz
Sensitivity (S/N30dB). . . . . . . . . . . . . . . . . . . . . . . 20 dBµV/m
Dock adapter x 8
(adapter “60GB (color) + Photo 40GB/60GB” premounted)
Cover for the Dock x 1
TUNER Section (AM)
Wall mount brackets x 4
Screw (short) x 8
Screw (long) x 4
Frequency Range . . . . . . . . . . . . . . . . . . . . 522 to 1,620 kHz
Sensitivity (S/N20dB). . . . . . . . . . . . . . . . . . . . . . . 54 dBµV/m
Tapered plastic wall anchor x 4
Guide sheet for wall mounting x 2
CD PLAYER Section
Frequency Response . . . . . . . . . . . . . 20 to 20,000 Hz ( 1 dB)
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 55 dB
Wow and Flutter . . . . . . . . . . . . . . . . . . . . . . . Unmeasurable
Owner’s manual x 1
Warranty card x 1
Quick guide for connection x 1
SPEAKER
• Design and specifications are subject to change without
notice.
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full range flat type
Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ohms
• Weight and dimensions are approximate.
• Illustrations may differ slightly from production models.
SUBWOOFER
Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 ohms
GENERAL
Power Requirements . . . . . . . . . . . . . . . . . . 230 V AC, 50 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 W
Dimension (W x H x D)
Main Unit . . . . . . . . . . . . . . . . . . . . 255 x 169.5 x 115 mm
L & R Speakers . . . . . . . . . . . . . . . . . 210 x 169.5 x 81 mm
Subwoofer. . . . . . . . . . . . . . . . . . . . . 160 x 245 x 335 mm
Weight (Net)
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 kg
L & R Speakers. . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg each
Subwoofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.3 kg
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Z
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081
TEAC CORPORATION
TEAC AMERICA, INC.
TEAC CANADA LTD.
TEAC MEXICO, S.A. De C.V
TEAC UK LIMITED
7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303
5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008
Campesinos N°184, Colonia Granjas Esmeralda, Delegacion Iztapalapa, CP 09810, México DF Phone: (525) 581-5500
Unit 19 & 20, The Courtyards, Hatters Lane, Watford, Hertfordshire, WD18 8TE, U.K. Phone: (0845) 130-2511
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany Phone: 0611-71580
TEAC EUROPE GmbH
This appliance has a serial number located on the rear panel. Please record
the model number and serial number and retain them for your records.
.
Model number
Serial number
0607 MA-1245A
Download from Www.Somanuals.com. All Manuals Search And Download.
|
