Z
R-4iNT
FM/Internet-radio with iPod Dock
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
< Do not expose this apparatus to drips or splashes.
This product contains software. You have the non-exclusive, non-
transferable right to use this software in object code form only,
solely to operate this product.
< Do not place any objects filled with liquids, such as vases, on the
apparatus.
Ownership of the intellectual property rights in the software in
this product remains in the ownership of the party who provided
it (or the respective licensor) and all of their respective rights are
reserved.
< Do not install this apparatus in a confined space such as a book
case or similar unit.
You are strictly forbidden from modifying, translating, reverse
engineering, decompiling, disassembling or using other means
to discover the source code of the software in this product or
otherwise replicate the functionality of the software in this product
except to the extent that this restriction is expressly prohibited by
applicable law.
< The apparatus draws nominal non-operating power from the
AC outlet with its POWER or STANDBY/ON switch not in the ON
position.
< The apparatus should be located close enough to the AC outlet
Except where this is not possible in the territory where you
purchased this product, we do not give any warranties in relation to
the operation or performance of the software and neither we nor
any of our suppliers or licensors shall be liable to you for indirect,
special, incidental and consequential losses such as loss of profits
arising out of your use of the software in this product.
so that you can easily grasp the power cord plug at any time.
< The main plug is used as the disconnect device, the disconnect
device shall remain readily operable.
< If the product uses batteries (including a battery pack or installed
batteries), they should not be exposed to sunshine, fire or
excessive heat.
These terms apply to any updates to the software you may apply to
the product.
Portions of this software are included under license from
RealNetworks, Inc. Copyright 1995-2007, RealNetworks, Inc. All rights
reserved. RealAudio and the Real Enabled logo are trademarks or
registered trademarks of RealNetworks, Inc.
< Caution should be taken when using earphones or headphones
with the product because excessive sound pressure (volume)
from earphones or headphones can cause hearing loss.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS
and Thomson.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
MPEG-4 HE-AAC audio coding technology licensed by Fraunhofer
IIS.
CAUTION
< DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO
EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE
WITHIN.
This product is protected by certain intellectual property rights of
Microsoft.
Use or distribution of such technology outside of this product is
prohibited without a license from Microsoft.
< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT,
CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE
PRODUCT UNTIL IT HAS BEEN REPAIRED.
Windows XP and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or
other countries.
Content owners use Windows Media digital rights management
technology (WMDRM) to protect their intellectual property,
including copyrights. This device uses WMDRM software to access
WMDRM-protected content. If the WMDRM software fails to protect
the content, content owners may ask Microsoft to revoke the
software's ability to use WMDRM to play or copy protected content.
Revocation does not affect unprotected content. When you
download licenses for protected content, you agree that Microsoft
may include a revocation list with the licenses. Content owners
may require you to upgrade WMDRM to access their content. If
you decline an upgrade, you will not be able to access content that
requires the upgrade.
iPod is a trademark of Apple Inc., registered in the U.S. and other
countries.
“Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by
the developer to meet Apple performance standards.
If you download a software upgrade to your radio, additional
frontier-silicon.com/audio/eula.htm
iPhone is a trademark of Apple Inc.
“Works with iPhone” means that an electronic accessory has been
designed to connect specifically to iPhone and has been certified
by the developer to meet Apple performance standards.
The information at this address can be replicated for use on your
own website or portal but may be updated without notice.
Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
Windows Media is either a registered trademark or trademark of
Microsoft Corporation in the United States and/or other countries.
NXT is a trademark of New Transducers Ltd.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Before Use
Thank you for choosing TEAC. Read this manual carefully to
get the best performance from this unit.
Read this before attempting any operations.
< When this unit is on, turning on a TV nearby might cause lines to
appear on the TV screen, depending on the frequency of the TV
broadcast. This is not a malfunction of the unit or the TV. If you
see such lines, place this unit farther away from the TV set.
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
< Since the unit may become warm during operation, always leave
sufficient space around the unit for ventilation.
Make sure there is at least 8” (20 cm) of space above and at least
5 cm of space on each side of the unit. Do not place anything on
top of the unit.
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Internet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Identifying the Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Setup Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
< The voltage supplied to the unit should match the voltage that
is printed on the rear panel. If you are in any doubt regarding this
matter, consult an electrician.
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
< Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations that are subject to vibrations or excessive dust,
heat, cold or moisture.
AUX in
Listening to an External Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
iPod/iPhone
< Do not place the unit on an amplifier or receiver or any other
device that generates heat.
Getting Started with an iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . .17
Listening to an iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
< Do not open the cabinet as this might result in damage to the
circuitry or cause electrical shock. If a foreign object should get
into the unit, contact your dealer or service company.
Internet Radio/Podcast
Listening to the Internet Radio/Podcast. . . . . . . . . . . . . . . . . . . . . . . .20
Settings the Internet Radio/Podcast Display . . . . . . . . . . . . . . . . . . .21
Internet Radio/Podcast Menu Operations. . . . . . . . . . . . . . . . . . . . . .22
Radio Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
< When removing the power plug from the wall outlet, always pull
directly on the plug. Never yank on the cord.
< Do not attempt to clean the unit with chemical solvents as they
might damage the finish. Use a clean, dry or slightly damp cloth.
FM
Listening to the FM Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
< Keep this manual in a safe place for future reference.
Preset Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Pandora
Listening to Music of Pandora . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Music Player
Setting up the Music Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Listening to the Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Unit
Confirm the supplied standard accessories.
The included remote control allows this unit to be operated from a
distance.
Remote control unit (RC-1239) x 1
When using the remote control, point it towards the remote sensor
on the front panel of the main unit.
< Even if the remote control unit is used within its effective range,
operation by remote control might be impossible if there are any
obstacles between the unit and the remote control.
< If the remote control unit is operated near other devices that
generate infrared rays, or if other remote controls that use
infrared rays are operated near the unit, this unit might operate
incorrectly. The other devices might also operate incorrectly.
Batteries (AAA) x 2
AC adapter (PS-M1220) x 1
Battery Installation
Power cord for AC adapter x 1
1. Remove the battery compartment cover.
2. Insert two “AAA” (R03 or UM-4) dry batteries. Make sure that the
batteries are inserted with their positive “+” and negative “_”
poles positioned correctly.
Stereo mini-plug cable x 1
Dock adapter x 4
3. Close the cover.
Battery Replacement
If the distance from the main unit that the remote control works
effectively decreases, the batteries are probably exhausted. Replace
the batteries with new ones when this happens.
Dock cover x 1
For more information about the collection of batteries, please
contact your local municipality, your waste disposal service or the
place where you purchased them.
Owner’s manual (this document) x 1
Warranty card x 1
Precautions concerning batteries
< Be sure to insert the batteries with correct positive (+) and
negative (_) orientations.
< Use batteries of the same type. Never use different types of
batteries together.
< Both rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< If the remote control will not be used for a long time (more than
a month), remove the batteries to prevent them from leaking.
< If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
< Do not use batteries of types other than those specified. Do
not mix new batteries with old ones or use different types of
batteries together.
Maintenance
If the surface of the unit gets dirty, wipe it with a soft cloth or use
diluted mild liquid soap. Never spray liquid directly on this unit.
Apply cleaner to the cleaning cloth and wipe gently. Be certain
to remove any excess completely. Do not use thinner, benzene or
alcohol as they could damage the surface of the unit. Allow the
surface of the unit to dry completely before using.
< Do not heat or disassemble batteries. Never throw batteries into
fire or water.
< Do not carry or store batteries with other metallic objects. The
batteries could short circuit, leak or explode.
< Never recharge a battery unless it is confirmed to be a
rechargeable type.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Caution:
< Turn off the power (set to standby) before making connections.
< Read the instructions of each device you intend to use with this unit.
< Be sure to connect each plug securely. To prevent hum and noise, do not bundle the connection cords.
iPod/iPhone
(back side)
R-4iNT (back side)
A
B
C
D
PS-M1220
E
AC wall socket
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Connection
FM antenna
A
B
Using the wireless LAN
When you connect the power cord into the wall socket for the
first time, select your region of the wireless LAN in “Setup wizard”.
(page 10)
Extend fully and position for the best reception.
Keep antenna away from metallic objects, electrical
equipment and cords.
< A wireless access point (Wi-Fi) must be connected to your
broadband Internet, preferably via a router.
ETHERNET port
To enjoy the Internet radio and the Music player function,
connect the unit to the broadband internet network.
< If your wireless network is configured to use Wired Equivalent
Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption,
you need to know the WEP or WPA code to communicate with
the network for getting the Internet radio.
This unit has both a built-in wireless LAN antenna and a
ETHERNET port for wired internet connection.
Before you continue, make sure that your wireless access
point is enabled and connected to your broadband Internet,
or your LAN cable is connected correctly. For details of the
system working, we recommend you to read the operating
instructions supplied with the wireless access point and LAN
connecting.
< If your wireless network is configured for trusted stations you will
need to enter the R-4iNT’s MAC address into your wireless access
point. To find the R-4iNT’s MAC address, see page 12 to 13.
(“System Settings” w“Network” w“View settings” w“MAC address”)
< To enter the MAC address into your wireless access point, read
the instructions supplied with the wireless access point.
PHONES
C
To listen with headphones, first lower the volume level to
the minimum. Then, connect the headphones plug into the
PHONES jack, and adjust the volume by pressing the Volume
Using the LAN
To use a wired Internet connection, connect the ETHERNET port
of this unit to the ethernet network using a commercially available
ethernet cable.
buttons (
/
).
The speakers will make no sound when headphones are
plugged in.
Caution:
Do not turn the unit on or off, or connect or disconnect
headphones from this jack while wearing headphones.
Ver y loud sound could be out put from t he
headphones.
ETHERNET
AVOID DAMAGING YOUR HEARING - Do not put on
headphones until after plugging them in.
< Make sure the internet environment is ready and the network
settings is available for LAN (ADSL is highly recommended).
AUDIO IN
D
E
< To find the R-4iNT’s MAC address, see page 12 to 13.
(“System Settings” w“Network” w“View settings” w“MAC address”)
You can connect a portable audio player to this jack.
DC IN
Connect the supplied AC adapter (PS-M1220) to this jack.
Then connect the connector of the power cord to AC
adapter.
After all other connections are complete, connect the power
cord's plug to the AC wall socket.
Caution:
Connect the supplied AC adaptor (PS-M1220).
Do not use any AC adaptors other than the one included
with this unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying the Parts
B
C
D
E
F
A
A
L H
K J
I
H G
A Speakers (Stereo)
B Standby/On (
G INFO
In Internet radio or Music player mode, use this button to
change the information on the display.
)
Use this button to turn the unit on and standby.
H Volume (
/
)
C MULTI JOG
Use these buttons to adjust the volume level.
Turn this knob to tune in FM stations or to select parameters in
menus.
I
Remote sensor
When operating the remote control unit, point it towards here.
D Dock
J SNOOZE
Before use, insert an appropriate Dock adapter in the Dock
(page 17).
After the TIMER ON time is reached, press this button
repeatedly to select the temporary turn off time.
SLEEP
Insert an iPod/iPhone into this dock.
Set the supplied Dock cover when it is not being used.
Use this button to set the sleep timer.
E SELECT
K Display
Use this button to enter your selection.
In iPod mode, use this button to confirm a selection in a menu.
This button has the same functions as the center button of the
Click Wheel of an iPod.
L BACK
When in other than iPod mode, use this button to return to the
previous menu.
In FM mode, use this button to start the automatic tuning.
F MODE
Use this button to select a source.
MENU
When in other than iPod mode, press and hold this button for
more than 2 seconds to open menus.
In iPod mode, press this button for more than 2 seconds to go
back to previous menu. This button is equivalent to the MENU
button on your iPod/iPhone.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
e
MENU
When in other than iPod mode, press this button to open
menus.
In iPod mode, press this button to go back to previous menu.
This button is equivalent to the MENU button on your iPod.
a
f
k
m
o
SNOOZE
l
After the TIMER ON time is reached, press this button
repeatedly to select the temporary turn off time.
b
g
SLEEP
n
Use this button to set the sleep timer.
c
h
i
SCAN
In FM mode, use this button to start the automatic tuning.
d
e
INFO
p
In Internet radio or Music player mode, use this button to
change the information on the display.
q
r
j
Number buttons
f
g
i
Use these buttons to save or select the preset stations.
h
k
l
Dimmer (
)
Use this button to change the brightness of the display.
j
EQ (Equalizer)
Use this button to select a sound mode.
m
Volume (
/
)
Use these buttons to adjust the volume level.
n
o
p
Muting (
)
Use this button to mute the sound.
Shuffle (
)
a
b
c
STANDBY/ON (
)
In iPod mode, use this button to start shuffle playback.
Use this button to turn the unit on and standby.
Play/Pause (G/J)
FUNCTION (
˙,¥)
In iPod and Music player mode, use this button to start or
pause playback.
Use these buttons to select a source.
Repeat (
)
q
r
ALARM 1, ALARM 2
In iPod and Music player mode, use this button to set the
repeat function.
Use this button to enter the wake up timer setting mode.
CLOCK ADJ
d
Cursor buttons (
Use these cursor buttons to select parameters in menus.
In FM mode, use the buttons to tune in a station.
Skip/Search (
/
/
/
)
Use this button to enter clock adjustment mode.
/
)
.//
In iPod mode, use these buttons to skip to songs. Hold down
these buttons to search for a part of a song.
SELECT
Use this button to enter your selection.
Note:
In iPod mode, use this button to confirm a selection in a menu.
This button has the same functions as the center button of the
Click Wheel of an iPod.
To simplify explanations, instructions in this manual might refer
to the main unit or remote control only. In such cases, the same
controls on the remote control and main unit will operate similarly.
In FM mode, use this button to start the automatic tuning.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Wizard
When you connect the power cord into the wall socket and turn on
the unit for the first time, the Setup wizard appears on the display.
Follow the steps below to set the clock, the update method,
Turn the MULTI JOG to select the auto update method
of the clock, and then press the SELECT button.
3
your local wireless LAN region
and the network SSID
(Service Set ID).
Z
STARTING
Auto update
Update from Network
No update
Setup wizard
Start now?
When you select “Update from Network”
Turn the MULTI JOG to select your local time zone, and then
press the SELECT button.
YES
NO
Set timezone
UTC + 00:00: Dublin, Lon
UTC + 00:30 :
Press the SELECT button to select “YES”.
1
UTC + 01:00 : Madrid, Ar...
UTC + 01:30 :
UTC + 02:00 : Athens, Ci...
Turn the MULTI JOG to select the daylight savings status, and
then press the SELECT button.
Daylight savings
Daylight savings
ON
OFF
< If you want to cancel the Setup Wizard, turn the MULTI JOG to
select “NO”, and then press the SELECT button.
When you select “No update”
Turn the MULTI JOG to to set the current day, and then press
the SELECT button.
Turn the MULTI JOG to select the hour format, and then
press the SELECT button.
2
Set Time / Date
01 - 01 - 2009
00:00
Repeat step above to set “month”, “year”, “hour” and “minute”.
Date / Time
12 / 24 hour format
12
24
< The current setting is marked with a “ ”.
< If you want to return to the previous menu, press the BACK
button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn the MULTI JOG to select your local wireless LAN
region, and then press the SELECT button.
4
When a WEP/WPA key (password) is required
The unit will ask you to input the WEP/WPA key and display
the password entry screen.
Please select
Wlan region
How to input characters
1. Turn the MULTI JOG to select the character you want to
input. And then, press the SELECT button to input the
selected character.
Key
Deletes the last
character.
BKSP
0123456789._-@,
Wlan region
abcdefghijklmn
OK
Most of Europe
USA
opqrstuvwxyzABC
CANCEL
DEFGHIJKLMNOPQR
Canada
Spain
Cancel the operation
and goes back to the
previous screen.
France
< WEP/WPA pass codes are case-sensitive.
2.Turn the MULTI JOG to select “OK” after selecting the final
character of your password.
Key
xxxxx
BKSP
0123456789._-@,
abcdefghijklmn
OK
opqrstuvwxyzABC
Turn the MULTI JOG to select your network (SSID), and
then press the SELECT button.
5
CANCEL
DEFGHIJKLMNOPQR
3. Press the SELECT button.
SSID
Customer
IR - 2F
Setup wizard
default
Setup wizard
completed
WifiDev
Customer
Press ‘SELECT’ to exit
Press the SELECT button to exit the Setup wizard.
6
< If the unit finds more than one network, turn the MULTI JOG
to select your favorite one, and then press the SELECT button.
When your network is not configured to request a
password (WEP/WPA)
The setting is completed.
< You can re-enter to the Setup wizard from the System settings
after the first time (see next page).
The unit will connect to the network.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
System Settings
This chapter describes how to use the “System settings”.
Most settings and adjustments are required to be set when
you first use the unit.
Turn the MULTI JOG to select the item you want to
change, and then press the SELECT button.
4
In other than iPod mode, press and hold the MENU
button for more than 2 seconds.
1
System settings
Equalizer
Network
Time/Date
Language
Factory Reset
>
>
>
>
Turn the MULTI JOG to change the setting, and then
press the SELECT button.
5
Hold down
more than 2 sec.
< In iPod mode, you can not enter the System settings. Press the
Mode button to change the mode, and then press and hold
the MENU button for more than 2 seconds.
Repeat steps 4 and 5 as required.
< The current setting is marked with a “ ”.
Turn the MULTI JOG to select “Main menu”, and then
press the SELECT button.
2
< See “Available menu items and settings” below for Individual
menu functions.
< If no button is pressed for more than 10 seconds, current
menu will be canceled and return to the previous display.
Press and hold the MENU button to exit the setup
mode.
6
Example: In the Internet radio mode
Internet radio
Last lietened
Station list
>
Main menu
>
< Settings are stored even when power is turned off and the
unit is unplugged.
Turn the MULTI JOG to select “System settings”, and
then press the SELECT button.
3
Available menu items and settings
Equalizer
See “Equalizer” on page 15.
Network
Main menu
Enable you to scan again for connection to another wireless
network, or to manually configure the network parameters.
iPod
Auxiliary Input
Sleep
Alarms
System settings
Internet Wizard
Proceeds to the internet wizard.
>
PBC Wlan setup
Setting the Wi-Fi Protected Setup (WPS) between the wireless
access point and R-4iNT.
< If you want to return to the previous menu, press the BACK
button.
Select WPS on the wireless access point, and then press the
SELECT button on the R-4iNT.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock
View settings
If you set “Main menu” w “System settings” w “Time/Date” w
“Auto update” to “No update”, the clock need to be adjusted
manually.
Displays the current network settings. You can check the
setting of following items:
Active connection
Wlan region
SSID
MAC address
DHCP
IP address
Press the CLOCK ADJ button.
1
Subnet mask
Primary DNS
Gateway address
Secondary DNS
Wlan region
Selects the region of the wireless LAN.
Manual settings
Sets the Internet connection manually. Follow to navigate of
the menus.
Network profile
Set Time / Date
Displays the network profile.
01 - 01 - 2009
Time/Date
00:00
Set Time/Date
To adjust the clock manually, use this menu. (See “Setting the
Clock“ on the right).
Auto update
The “day” value blinks.
Select the auto update method.
Set format
Select the hour format.
Press the Cursor botton (
and then press the SELECT button.
/
) to set the current day,
2
When you select “Auto update“ to “Update from Network“,
following menus appear.
Set timezone
Select your local time zone.
Daylight savings
Select the daylight savings status “ON“ or “OFF“.
Language
Select the desired language for display menus from the following:
Set Time / Date
English, Danish, Dutch, Finnish, French, German, Italian,
Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish
04 - 01 - 2009
00:00
< If the unit is set to a foreign language and you find it impossible
to read the menu settings, you can restore all the factory default
settings, and the menus will appear in English again (all other
settings will be cleared).
The “month” value blinks.
< You can also use the MULTI JOG instead of the Cursor button
Factory Reset
(
/
).
If you want to restart from a known set of options, restore the unit
to the factory settings.
To reset the setting, select “YES”.
Repeat step 2 to set “month”, “year”, “hour” and
“minute”.
3
< The unit completely erase all setting such as radio preset, WEP/
WPA codes and user setting.
Software update
When “minute” is set, the clock starts.
Auto-check setting
Selects software update automatically or manually.
Check now
Executes the software update.
Setup wizard
See “Setup wizard” on page 10.
Info
Displays the current software version and Radio ID.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
This chapter describes the basic operation which is available in
every mode.
Play the source, and adjust the volume using the
Volume button ( or ).
3
Press the Standby/On button ( ) to turn the unit on.
1
The volume can be adjusted from Muted (00) to Max (20).
To reduce or turn up the volume continuously, hold down the
Volume button ( or ).
< The unit turns on with the source that was last selected.
< Press the Standby/On button (
) to put the unit in the
standby mode when it is not being used.
Press the MODE button repeatedly to select a source.
2
Dimmer
You can change the brightness of the display.
Use the DIMMER button ( ) to set the brightness one of three
levels.
The selected source is shown on the display.
Each time the MODE button is pressed, the source changes as
follows:
Full brightness
Medium brightness
Minimum brightness
Internet radio
Music player
< Setting is cancelled if the Standby/On button ( ) is pressed.
Pandora
FM radio
iPod
Muting
You can mute the sound temporarily.
Aux in
< You can also use the FUNCTION buttons (
˙
/
¥) on the
remote control unit to select a source.
To mute the sound, press the Muting button ( ).
Press the Muting button ( ) again to restore the sound.
< The Muting indicator ( ) appears on the display while muting is
engaged.
< If you change the volume when the sound is muted, it will be
unmuted.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
My EQ profile setup
Equalizer
Bass:
Treble:
0
You can adjust the sound according to the genre of music or your
taste.
0
Loudness: Off
Press the EQ button to enter the equalizer mode.
1
Press the Cursor botton (
/
) to select a item.
2
Equalizer
Normal
Flat
When you want to adjust “Bass” or “Treble”.
Press the SELECT button.
Jazz
Rock
Movie
Press the Cursor botton (
equalizer and then press the SELECT button.
/
) to select a preset
2
Press the Cursor button (
/
) to adjust the value of the
selected item, and then press the SELECT button.
< The current setting is marked with a “ ”.
Normal
Flat
Equalizer is off.
Flat sound quality with the bass adjustment.
Suitable for jazz music.
Jazz
Rock
Provides a heavy powerful sound; suitable for
rock music.
When you want to adjust “Loudness”.
Press the SELECT button to change “On” and “Off”.
Movie
Classic
Pop
Suitable for movie.
A balanced sound; suitable for classical music.
Emphasizes vocal tones; suitable for popular
music.
Press the EQ button.
3
4
News
Suitable for News.
My EQ
Equalizer you set by yourself.
My EQ profile setup
Set the equalizer by yourself (see below).
“Save changes?” appears on the display.
Setting the equalizer by yourself
When you select “My EQ” in the equalizer mode, set the profile of
“My EQ” as follows:
Press the SELECT button to select “YES”.
Select “My EQ profile setup” in the equalizer mode (see
above), and then press the SELECT button.
1
Your customized equalizer is saved to “My EQ”.
And “My EQ” is selected as a current setting.
< If you want to cancel, Press the Cursor button (
/
) to select
“NO”, and then press the SELECT button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX in
Listening to an External Source
In addition to connecting other audio devices, you can use the
AUDIO IN to listen to an iPod that has no dock connector or when
an appropriate Dock adapter is not available.
Play the source, and adjust the volume using the
Volume button ( or ) of the R-4iNT and of the audio
player.
3
Connect the PHONES jack or audio output jack of a
portable audio player to the AUDIO IN jack of the
R-4iNT using the supplied stereo mini-plug cable.
1
AUDIO IN
< When using the headphones jack of a device, if you do not
adjust its volume, you might not hear any sound from the
R-4iNT.
< Turning the volume of the connected device up too high
might cause the sound from your R-4iNT to be distorted. In
this case, reduce the volume of the device until the distortion
stops and then adjust the volume level of the R-4iNT to a
comfortable listening level.
Press the MODE button repeatedly to select “Aux in”.
2
Aux in
< You can also use the FUNCTION button (
˙/¥) on the remote
control unit to select “Aux in”.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone
Getting Started with an iPod/iPhone
To play your iPod/iPhone through the R-4iNT, you must first insert
the Dock adapter for your model of iPod/iPhone.
Compatible iPod/iPhone Software
If your iPod/iPhone will not work with the R-4iNT or with the remote
control unit, software update might solve the problem.
Visit the Apple website and download the latest iPod/iPhone
software.
Select the Dock adapter that fits your iPod/iPhone.
1
#7: iPod Photo (40 GB/60 GB),
iPod with Click Wheel 40 GB,
iPod with color display (iPod Photo) 40/60 GB,
iPod with color display 60 GB,
iPod with video 60/80 GB,
iPod Classic 160 GB (2007) 160 GB
#9: 5G iPod with video (30 GB)
iPod with video 30 GB,
iPod with video U2 Special Edition 30 GB,
iPod Classic 80/120 GB,
iPod Classic 160 GB (2009) 160 GB
#14: iPod Touch 1st generation
iPod Touch 8/16/32 GB
#15: iPhone (3G)
iPhone (3G) 8/16 GB,
iPhone (3G S) 16/32 GB
< Use the adapter that supplied with the iPod/iPhone or a
commercially available one to use the other types of iPod/
iPhone.
Insert the adapter into the R-4iNT dock.
2
Fit the front edge of the adapter into the Dock, and then press
the back edge of the adapter onto the Dock until a slight
“click” is heard indicating the adapter is inserted correctly.
1
2
< To remove the adapter, hold its left and right sides and gently
pull it up.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone
Listening to an iPod/iPhone (1)
Before use, insert an appropriate Dock adapter in the Dock.
Stopping playback temporarily
(Pause mode)
During playback, press the Play/Pause button (G/J). Playback
stops at the current position.
Press the MODE button repeatedly to select “iPod”.
1
To resume playback, press the Play/Pause button (G/J) again.
iPod
< You can also use the button on the iPod/iPhone to pause
playback.
< You can also use the FUNCTION button (
˙/¥) on the remote
control unit to select “iPod”.
Insert the iPod/iPhone into the Dock.
2
Skipping to an earlier or later song
During playback, press the Skip buttons (.//) repeatedly
until you find the desired song. The selected song will be played
from the beginning.
< If the . button is pressed once during playback, the song
currently being played will be played from the beginning. To
return to the beginning of the previous song, press the .
button twice.
Press the Play/Pause button (
R-4iNT's remote control unit .
/
) on the iPod or the
3
yJ
The R-4iNT will start playback from the iPod/iPhone’s song list.
< When the iPod/iPhone is inserted while a source other than
iPod mode is selected or while the R-4iNT is in the standby
mode, “iPod attached – Switch to iPod mode?” is displayed.
In this case turn the MULTI JOG to select “YES”, and then press
the SELECT button.
Searching for a part of a song
< In iPod mode, if an iPod/iPhone that is in playback mode is
inserted into the dock, the R-4iNT will automatically start
playback from the iPod/iPhone’s song list.
< Make sure to use an appropriate Dock adapter (see previous
page).
Hold down
< The battery of the iPod/iPhone is recharged to the full
whenever the iPod/iPhone is docked and the R-4iNT is
connected to the AC line.
During playback, hold down the Search button (.or/) to
search a part of a song.
Release it when you find the part you want to hear.
< If headphones are also plugged into the iPod/iPhone, sound
comes from both the headphones and the R-4iNT speakers.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod/iPhone
Listening to an iPod/iPhone (2)
Returning to the previous iPod/iPhone menu
Activating the shuffle mode
Press the MENU button on the remote control unit.
This button has the same functions as its iPod counterpart.
During playback, press the SHUFFLE button to change the
shuffle mode.
Each time the SHUFFLE button is pressed, the iPod/iPhone
shuffle setting changes as follows:
SONG
ALBUM
Selecting the iPod/iPhone menu item
(off)
< If you select “SONG”, the iPod/iPhone shuffles songs within the
list you choose to play.
< If you select “ALBUM”, the iPod/iPhone plays all the songs on an
album in order, and then randomly selects another album in the
list and plays it through in order.
Press the Cursor button (
/
) to scroll to the menu item you
want, and then press the SELECT button.
< During shuffle playback, the shuffle icon (
) appears on the
iPod/iPhone’s display.
Activating the repeat mode
During playback, press the REPEAT button to change the repeat
mode.
Each time the REPEAT button is pressed, the iPod/iPhone repeat
setting changes as follows:
REPEAT ONE
(off)
REPEAT ALL
< If you select “REPEAT ONE” to play only one song, the repeat
once icon ( ) appears on the iPod/iPhone’s display.
< If you select “REPEAT ALL” to play all songs, the repeat icon (
)
appears on the iPod/iPhone’s display.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Radio/Podcast
Listening to the Internet Radio/Podcast
This chapter describes how to listen to an Internet radio station/a
Podcast.
Turn the MULTI JOG to select the search method, and
then press the SELECT button.
4
Press the MODE button repeatedly to select “Internet
radio”.
1
You can choose one of five search method.
Location Search by the location of the broadcaster.
Genre
Search by the genre of music played on the
station/Podcasts.
Internet
radio
Search stations
Search by the station’s name.
Popular stations
Select from a list of popular stations.
New stations
Select from a list of recently added stations.
The last listened station is received.
< You can also use the FUNCTION button (˙/¥) on the remote
control unit to select “Internet radio”.
When you select “Location” or “Genre”
Turn the MULTI JOG to select a location or genre, and then
press the SELECT button.
Turn the MULTI JOG to select “Station list”, and then
press the SELECT button.
2
Internet radio
Last listened
When you select “Search stations”
Input a station name you want to listen to.
Station list
Main menu
>
>
How to input characters
1. Turn the MULTI JOG to select the character you want to
input. And then, press the SELECT button to input the
selected character.
The Station list appears.
Stations
Turn the MULTI JOG to select “Stations”, and then press
the SELECT button.
3
Deletes the last
character.
BKSP
0123456789._-@,
abcdefghijklmn
OK
opqrstuvwxyzABC
CANCEL
DEFGHIJKLMNOPQR
Cancel the operation
and goes back to the
previous screen.
2.Turn the MULTI JOG to select “OK” after inputting the final
character of the station name.
A list of search methods appears.
Stations
xxxxx
BKSP
0123456789._-@,
abcdefghijklmn
OK
opqrstuvwxyzABC
CANCEL
DEFGHIJKLMNOPQR
A list of stations is displayed.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Radio/Podcast
Settings the Internet Radio/Podcast Display
You can choose the type of information displayed while listening to
the Internet Radio/Podcast.
Turn the MULTI JOG to select a station or a Podcast you
want to listen to, and then press the SELECT button.
5
Now you can listen to the station.
Each time the INFO button is pressed, information on the display
changes as follows:
Internet radio
Description
Genre/Country
Reliability
Bit Rate /Codec / Sampling Rate
Playback buffer
Today’s Date
Podcast
Time bar
Episode name
Description
Genre and Country
Language
Episode URL
Bit Rate / Codec / Sampling Rate
Playback buffer
Today’s Date
< The types of information displayed may vary depending on the
stations/Podcasts.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Radio/Podcast
Internet Radio/Podcast Menu Operations
You can access station lists or setup menus using the Internet radio
menu.
Items of the Internet radio menu
Last listened
You can select the station/Podcast from the ones you listened
to recently.
In Internet radio mode, press and hold the MENU
button for more than 2 seconds.
1
Station list
My favorites
List of stations/Podcast you stored as favorite is displayed.
Select a station/Podcast you want to listen to (see next page).
Local
List of stations/Podcasts provided in your country is displayed.
Select a station/Podcast from your favorite genre.
Stations
Hold down
more than 2 sec.
List of Internet radio stations is displayed (page 20).
Podcasts
List of Podcasts is displayed.
Turn the MULTI JOG to find the desired menu.
2
Internet radio
My Added Stations
Last listened
Station list
Main menu
List of stations/Podcasts you personally added on the radio
portal is displayed. Select a station/Podcast you want to listen
to (see next page).
>
>
Help
Get access code
The “access code” of the unit is displayed (see next page).
Each unit of R-4iNT has its “access code”. This code is
required to log in the Internet radio portal.
FAQ
< You can also use the Cursor buttons (
control unit to scroll through menu items.
/
) on the remote
Audio FAQ is available.
For the detail of each item, see right
Press the SELECT button to select a menu item.
3
2
3
Repeat steps and as required.
< Press the button on the remote control unit to go back to
the previous menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Radio/Podcast
Radio Portal
Access the radio portal on the Internet using your computer to fully
enjoy the Internet radio function of this unit.
My favorites
You can create a list of your favorite stations/Podcasts on the portal.
This list can be viewed from the R-4iNT, making it easier for you to
find your usual programs.
Accessing the radio portal
You can see the list of your favorite stations in the Internet
radio menu as follows: (See previous page for details)
On your computer, open internet browser and access
following URL.
1
“Station list” w“My favorites”
Click on the “Register” link to start registration.
2
Station list
If the station/Podcast you want to listen to is not in the station list,
you can create your own list.
Input your access code and log in.
3
You can see the list of your added stations in the Internet radio
menu as follows: (See previous page for details)
“Station list” w“My Added Stations”
Checking the “access code” of your unit
Each unit of R-4iNT has its “access code”. This code is required to log
in the Internet radio portal.
You can see the access code of your R-4iNT in the Internet
radio menu as follows: (See previous page for details)
“Station list” w“Help” w“Get access code”
23
Download from Www.Somanuals.com. All Manuals Search And Download.
FM
Listening to the FM Radio
This chapter describes how to listen to the FM radio.
Switching the stereo and monaural mode
Press the MODE button repeatedly to select “FM radio”.
1
In FM mode, press and hold the MENU button for more
than 2 seconds to open the FM menu.
1
FM
radio
The last listened station is received.
Hold down
more than 2 sec.
< You can also use the FUNCTION button (˙/¥) on the remote
control unit to select “FM radio”.
Turn the MULTI JOG to select “Audio setting”, and then
press the SELECT button.
2
Automatic Tuning:
2
Press the SELECT button to begin automatic tuning.
FM
Scan setting
Audio setting
Main menu
>
When a station is found, the unit tunes in the station
automatically. Repeat this step until the station you want to
listen to is found.
< You can also use the SCAN button on the remote control unit
to begin automatic tuning.
“Listen in mono only?” appears on the display.
< The current setting is marked with a “ ”.
Manual tuning:
Turn the MULTI JOG until you find the station that you
want to hear.
3
Turn the MULTI JOG to select “YES” or “NO”, and then
press the SELECT button.
< You can also use the Cursor buttons (
/
) on the remote
control unit to select a station.
NO
FM stereo broadcasts are received in stereo.
< If the sound is distorted, the signal is not strong enough
for good stereo reception. In this case, select “YES” to
change to mono mode.
YES
Reception will now be forced into monaural, reducing
unwanted noise. To compensate for weak FM stereo
reception, select mono mode.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
FM
Preset Tuning
You can store up to 10 FM stations.
Changing the sensitivity
How to preset stations
In FM mode, press and hold the MENU button for more
than 2 seconds to open the FM menu.
1
Tune in a station you want to store (see previous page).
1
2
Press and hold the Number buttons you want to store
the station.
Hold down
more than 2 sec.
Hold down
Turn the MULTI JOG to select “Scan setting”, and then
press the SELECT button.
2
“Preset stored” appears on the display.
FM
Scan setting
Audio setting
Main menu
>
How to select preset stations
In FM mode, press the Number button.
“Strong stations only?” appears on the display.
< The current setting is marked with a “ ”.
The selected preset station is tuned in.
Turn the MULTI JOG to select “YES” or “NO”,, and then
press the SELECT button.
3
When you select “YES”, the R-4iNT receives strong signal only.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Pandora
Listening to Music of Pandora
You can access Pandora internet radio and listen to the music files.
For details, see the website of Pandora.
Turn the MULTI JOG to select “User account”, and then
press the SELECT button.
4
This function may be unavailable in any country or region where
the Pandora service is not provided. Part or all of the service
may also become unavailable in the future due to the service
provider's circumstances.
Pandora
Setting up the Pandora
<User account>
To listen to the music files of Pandora, you need the account of the
Pandora.
Press the MODE button repeatedly to select “Pandora”.
1
Turn the MULTI JOG to select “Add new account”, and
then press the SELECT button.
5
Pandora
Pandora
<Add new account>
< You can also use the FUNCTION button (˙or¥ ) on the
remote control unit to select “Pandora”.
2
Press and hold the MENU button for more than
2 seconds to open the Pandora menu.
Activation code
XXXXXXXX
Please enter at
Press SELECT to
continue
Hold down
more than 2 sec.
An “Activation code” and a URL appear on the display of the
R-4iNT.
Pandora
Station list
>
>
>
Pandora setup
Main menu
< Do not press the SELECT button in this step.
Sign up for Pandora using your computer.
Access the URL and follow the instruction on the web site.
“Done” appears when the registration is completed.
6
7
Turn the MULTI JOG to select “Pandora setup”, and
then press the SELECT button.
3
Press the SELECT button of the R-4iNT.
The R-4iNT will memorize your Pandora account.
< You can use up to 3 accounts of Pandora with the R-4iNT.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio of Pandora
Adding a new station to the Station list
You can add a new station to the Station list in the Pandora
menu as follows:
Press the MODE button repeatedly to select “Pandora”.
1
“Station list” w“Create New Station”
Items of the Current track menu
During playback of the music files of Pandora, the “Current
track” menu is available. Press the MENU button for more than
2 seconds.
Pandora
Pandora
Station list
>
Current track
Pandora setup
Main menu
>
>
>
< You can also use the FUNCTION button (˙or¥ ) on the
remote control unit to select “Pandora”.
2
Press and hold the MENU button for more than
2 seconds to open the Pandora menu.
You can select one of three items.
Don’t play this song for a month
This will prevent the current music file from playing for
30 days.
Hold down
more than 2 sec.
Why this song?
A description of the current music file appears.
Bookmark…
Turn the MULTI JOG to select “Station list”, and then
press the SELECT button.
3
You can bookmark the song or artist of the current music
file.
Pandora
Station list
Pandora setup
Main menu
>
>
>
Turn the MULTI JOG to select the music you want to
listen to, and then press the SELECT button.
4
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Player
Setting up the Music Player
Select the “Jupiter 6.2 XXXXX (Radio ID)” and click
“Allow”.
6
About the Music player function
Using the Music player function, you can play back the music files in
your computers on the same LAN.
Using this function, R-4iNT can play back the music files in the
shared media library. Tag items such as artist names and album
names can be viewed from R-4iNT as well.
You need a PC running on Windows XP or Windows Vista,
and Windows Media Player 11 or later on it.
Preparations for Music player
The R-4iNT can now access the shared library.
Connect your computer to the LAN.
1
Click on “Settings...”, and configure detailed sharing
settings.
7
Connect the R-4iNT to the LAN (page 7).
2
If the files you want to share are not yet added to the
media library of Windows Media Player, add them to
the media library.
3
< Refer to the manual of Windows Media Player for details.
On Windows Media Player, open “Library”, then “Media
sharing”.
4
< To listen to music files regardless of their rating, set “Star
ratings” to “All ratings”.
< Ensure that “Music” is checked under the “Media types”
setting.
Media Sharing window opens.
Activate “Share my media to:”.
5
For the procedure of playback, see next page.
The R-4iNT appears in the device list as “Jupiter 6.2 XXXXX
(Radio ID)”.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Player
Listening to the Music Player
For the preparation of the Music player, see previous page.
Turn the MULTI JOG to select the file you want to listen
to, and then press the SELECT button.
5
Press the MODE button repeatedly to select “Music
player”.
1
Playback of the selected file starts.
Music
player
Repeat playback/Shuffle playback
You can set the repeat or shuffle playback.
The Music player menu appears.
< You can also use the FUNCTION button (˙/¥) on the remote
control unit to select “Music player”.
Press the MODE button repeatedly to select “Music
player”.
1
Press the SELECT button to enter “Shared media”
2
menu.
Music player
Shared media
My playlist
Repeat play: On
Shuffle play: Off
Clear My playlist
>
>
>
Music
player
The Music player menu appears.
A list of computer name and user account name appear.
< You can also use the FUNCTION button (˙/¥) on the remote
control unit to select “Music player”.
Turn the MULTI JOG to select your computer name and
user account name, and then press the SELECT button.
Shared media
3
Turn MULTI JOG to select “Repeat play” or “Shuffle
play”, and then press the SELECT button.
2
TOM-PC: USER1:
JEF-PC: USER2:
>
>
Example:
Music player
Shared media
My playlist
>
>
Repeat play: On
Shuffle play: Off
Clear My playlist
>
Turn the MULTI JOG to select the folders until the file
you want to listen to appears, and then press the
SELECT button.
4
Each time the SELECT button pressed, the repeat or shuffle
mode changes on and off.
Repeat this operation until the file you want appears.
< You can also search for files by selecting “<Search>”.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
Wake Up Timer
You can set the sleep timer so that the unit turns itself off after a
specified amount of time.
You can set the unit to turn on at specific times. You can set two
separate timers with ALARM 1 and ALARM 2.
Setting the wake up timer
The procedures below are to set ALARM 1.
Follow similar steps to set ALARM 2.
Press the ALARM 1 button to enter the wake up timer
setting mode.
1
Each press of the SLEEP button cycles through timer options
(from 15 up to 60 minutes). The unit will automatically stop
playback and enter Standby mode when the time elapses.
15 min.
30 min.
OFF
Alarm 1
45 min.
Enable: Daily
Time: 00:00
Mode: Internet radio
Preset: Last listened
Volume: 12
60 min.
< During the sleep timer, the Sleep indicator ( ) appears on the
display.
< If the clock has not been set, clock setting display appears.
Follow the steps on page 13. (“Setting the Clock”)
< If you want to check the remaining time, press the SLEEP button
once. The remaining time will be displayed for 3 seconds, and
then return to the normal display.
Turn the MULTI JOG to select an item to set, and then
press the SELECT button.
2
< You can also use the Cursor buttons (
/
) on the remote
control unit to select an item.
Turn the MULTI JOG to set the value or select an item,
and then press the SELECT button.
3
Items of the frequency value
off
Timer off
Daily
Once
Works daily
Works once
Weekends Works on every weekend
Weekdays Works on every weekday
< “AUX” and “Music player” cannot be selected as a mode
value.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Repeat steps and to set all the items.
4
5
Checking the timer setting
After all items are set, turn the MULTI JOG to select
“Save”, and then press the SELECT button.
Press the ALARM 1 or ALARM 2 button to enter the wake up
timer setting mode and check the details.
Alarm 1
Time: 00:00
Mode: Internet radio
Preset: Last listened
Volume: 12
Save
Using the snooze function
“Alarm saved” appears on the display.
And then the Timer indicator ( ) appears.
Prepare the source.
6
If the mode is set to “iPod”, insert an iPod/iPhone into the
Dock.
If the mode is set to “Internet radio” or “FM”, tune in a station.
< If the source is set to “iPod” but no iPod/iPhone is set, the
buzzer will sound instead.
After the ON time is reached, press the SNOOZE button
repeatedly to select the temporary turn off time.
5 min.
10 min.
15 min.
30 min.
Note for use with an iPod Touch/iPhone
(When using the R-4iNT wake up timer with an iPod
Touch/iPhone as the source)
< If you turn the power of an iPod Touch/iPhone off ("Slide to
power off"), you cannot use it with the wake up timer even if
it is docked in this unit. To use the wake up timer with an iPod
Touch/iPhone as the source, do not select "Slide to power off"
on the iPod Touch/iPhone. (The screen of the iPod Touch/
iPhone can be turned off without any problem.)
< If Video is displayed on an iPod Touch/iPhone’s screen, you
cannot use it with the wake up timer even if it is docked in
this unit. To use the wake up timer with your iPod Touch/
iPhone as a source, select any item other than Video on the
iPod Touch/iPhone.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any problems with the unit, please take a moment
to look through this chart and see if you can solve the problem
yourself before you call your dealer or a TEAC service center.
Internet Radio/Podcast
Cannot connect to the Internet.
eCheck if your computer can connect to the Internet using the
same network.
eEnter a correct pass key to the network.
eCheck the settings of your network’s firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
General
No power.
eCheck the connection to the AC power supply. Check and
make sure the AC source is not a switched outlet and that, if it
is, the switch is turned on. Make sure there is power to the AC
outlet by plugging another item such as a lamp or fan.
ePress the Standby/On button ( ) to turn the unit on.
Cannot listen to a station/Podcast.
eThe broadcaster is having temporary trouble with the Internet
connection.
eCheck if your Internet connection is not temporarily
disconnected or disturbed.
Remote control does not work.
ePress the Standby/On button ( ) to turn the unit on.
eIf the batteries are dead, change the batteries.
eUse remote control unit within the range (16 ft/5 m) and
point at the front panel.
eClear obstacles between the remote control unit and the
main unit.
Cannot find a station/Podcast in the station list.
eThe station/Podcast may not be broadcast at the moment.
eThe link of the station/Podcast may be out of date.
eThe allowed number of simultaneous listeners of station/
Podcast might have reached the maximum.
eThe Internet connection speed is too slow.
eAdd the station/Podcast to your own station list by accessing
the Internet radio portal.
eIf a strong light is near the unit, turn it off.
Severe hum or noise is heard.
ePlace the unit as far away from a TV as possible.
eMake sure the line cords and speaker cables are as far away
from the AC supply as possible.
Pandora
Cannot connect to the Internet.
eCheck if your computer can connect to the Internet using the
same network.
iPod/iPhone Player
eEnter a correct pass key to the network.
eCheck the setting of your network’s firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
Cannot insert the iPod/iPhone.
eCheck if appropriate adapter is inserted to the Dock (page 17).
eRemove dust or obstacles from the Dock and the iPod/
iPhone.
Cannot connect to the Pandora.
eCheck your user account and password.
The iPod/iPhone does not play.
eRemove the iPod/iPhone from the Dock, wait a few seconds,
and insert it again.
eSoftware update may solve the problem. Visit the Apple
website and download the latest iPod/iPhone software
(page 17).
Music Player
Cannot connect to the LAN.
eCheck if your computer can connect to the Internet using the
Cannot operate the iPod/iPhone on the unit.
eSelect “iPod” as the source.
same network.
eEnter a correct pass key to the network.
eCheck the settings of your network’s firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
eCheck if the computer is not shut down or in the sleep mode.
Set up the computer not to shut down or turn into the sleep
mode automatically.
Cannot operate the iPod/iPhone.
eMake sure the HOLD switch of the iPod/iPhone is not set to
HOLD.
eThere may be a problem with the network authentication.
Press the MODE button repeatedly to select “Music player”
again.
FM Tuner
Cannot listen to any station, or signal is too weak.
eTune in the station properly.
eRotate the FM antenna until you get stations clearly.
Cannot find a track.
eAdd the track to the media library of Windows Media Player.
eSet your R-4iNT as a “Jupiter 6.2 XXXXX (Radio ID)” in the
device list of Windows (page 28).
eSelect “Allow” for R-4iNT (“Jupiter 6.2 XXXXX (Radio ID)”)
(page 28).
eCheck the file format. Playable formats are MP3 and WMA.
eIf you have antivirus security software enabled on your
computer, the unit may fail to connect.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Amplifier
Output power
(Stereo, JEITA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 W rms + 10 W rms
Total harmonic distortion. . . . . . . . . . . . . . . . . . . . 0.1 % (at 5 W, 1 kHz)
Frequency response . . . . . . . . . . . . . . . . . 20 Hz to 20 kHz, +0 / –3 dB
Signal-to-noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 dB (IHF-A)
Speaker system
Type . . . . . . . . . . . . . . . . NXT Balanced Mode Radiator (BMR) system
Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ω
FM Tuner section
Tuning range. . . . . . . . . . . . . . .87.5 MHz to 108.0 MHz (50 kHz steps)
Total harmonic distortion (1 kHz) . . . . . . . . . . . . . . . . . . . . . Mono: 1 %
Stereo: 1.5%
Frequency response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Hz to 10 kHz
Stereo separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 dB
Signal-to-noise ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mono: 60 dB
Stereo: 55 dB
Internet radio/Music player
Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MP3, WMA, RealAudio
Internet connection
ETHERNET terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 BASE-T
Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IEEE 802.11b/g
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WEP, WPA, WPA2
General
Power requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AC 120 V, 60 Hz
Power consumption. . . . . . . . . . . . . . . . . . . . . . . 20 W (Standby: <1 W)
Dimensions (W x H x D)
310 x 53 x 210 mm (12-3/16”, 2-1/16”, 8-1/4”)
Weight (net). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6 kg (3-1/2 lb)
Standard accessories
Remote control unit (RC-1239) x 1
Batteries (AAA) x 2
AC adapter (PS-M1220) x 1
Power cable for AC adapter x 1
Stereo mini-plug cable x 1
Dock adapter x 4
Dock cover x 1
Owner’s manual (this document) x 1
Warranty card x 1
M Design and specifications are subject to change without notice.
M Weight and dimensions are approximate.
M Illustrations may differ slightly from production models.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Z
1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan Phone: (042) 356-9156
TEAC CORPORATION
TEAC AMERICA, INC.
TEAC CANADA LTD.
7733 Telegraph Road, Montebello, California 90640 U.S.A. Phone: (323) 726-0303
5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008
TEAC MEXICO, S.A. DE C.V.
TEAC UK LTD.
Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacàn, CP 04100, México DF, México Phone: (5255)5010-6000
Suites 19 & 20, Building 6, Croxley Green Business Park, Hatters Lane, Watford, Hertfordshire, WD18 8TE, U.K. Phone: (0845) 130-2511
Bahnstraße 12, D-65205 Wiesbaden-Erbenheim, Deutschland Phone: 0611-71580
TEAC EUROPE GMBH
This appliance has a serial number located on the rear panel. Please record the
model number and serial number and retain them for your records.
.
Model number
Serial number
1009 M1509A
Download from Www.Somanuals.com. All Manuals Search And Download.
|