D00945120A
»
CD-160MK#
Compact Disc Player
OWNER'S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
• Do not expose this apparatus to drips or splashes.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
• Do not place any objects filled with liquids, such as
vases, on the apparatus.
• Do not install this apparatus in a confined space such
as a book case or similar unit.
4 Follow all instructions.
• The apparatus draws nominal non-operating power
from the AC outlet with its POWER switch in the off
position.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
• The apparatus should be located close enough to the
AC outlet so that you can easily grasp the power cord
plug at any time.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• An apparatus with Class I construction shall be con-
nected to an AC outlet with a protective grounding
connection.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Batteries (battery pack or batteries installed) should
not be exposed to excessive heat such as sunshine,
fire or the like.
10 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or
when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
TASCAM CD-160MKll
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
This product has been designed and manufactured
according to FDA regulations "title 21, CFR, chapter 1,
subchapter J, based on the Radiation Control for Health
and Safety Act of 1968", and is classified as a class 1
laser product. There is no hazardous invisible laser radia-
tion during operation because invisible laser radiation
emitted inside of this product is completely confined in
the protective housings.
CAUTION
• DO NOT REMOVE THE PROTECTIVE HOUSING
USING A SCREWDRIVER.
• USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
• IF THIS PRODUCT DEVELOPS TROUBLE,
CONTACT YOUR NEAREST QUALIFIED SERVICE
PERSONNEL, AND DO NOT USE THE PRODUCT
IN ITS DAMAGED STATE.
The label required in this regulation is shown at 1.
DTA
Optical pickup:
Type
: KSS-213CL
Manufacturer : SONY Corporation
Laser output : Lessthan0.4mWontheobjective
lens
Wavelength : 760 to 800 nm
ꢂ
TASCAM CD-1X6X0XMKll
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Repeat Playback................................ 19
Repeat one track (REPEAT)...........................19
Repeat all the tracks (REPEAT ALL)..............19
1 − Introduction ...............................6
Supplied accessories........................... 6
Rack-mounting the unit ..................... 6
About this manual.............................. 6
Repeat all the tracks in the folder
(REPEAT ALBUM) (MP3 only).................. 19
Shuffle Playback ............................... 19
Intro Check........................................ 19
Search Mode (MP3 only) .................. 20
Search for a name of track.........................20
Search for a track in a folder .....................21
Precautions and notes for
placement and use ......................... 7
Beware of condensation...............................7
Never use a stabilizer or
printable discs ...............................................7
About discs.......................................... 8
Handling of compact discs...........................8
Use of the remote control unit.......... 9
Batteries .........................................................9
Connections ........................................ 9
Inserting batteries ..........................................9
4 − Reference and
specifications..........................22
Troubleshooting................................ 22
No power...................................................... 22
Remote control doesn’t work..................... 22
No sound....................................................... 22
Will not play. ................................................ 22
Sound skips. ................................................. 22
Maintenance.................................................22
2 − Features of the
CD-160MKII..............................10
Front panel and RC-162C
Specifications.................................... 23
Dimensions........................................ 23
remote control unit...................... 10
Rear panel ......................................... 11
Display............................................... 12
3 − Disc operations ........................13
MP3 files and directories ................. 13
Listening to CD/MP3 (1).................... 14
To suspend playback temporarily
(pause mode) ...........................................15
To stop playbacks..........................................15
Search for a part of a track ..........................15
To skip to the next or a previous track .......15
Direct Playback..............................................15
Pitch control ..................................................15
Listening to CD/MP3 (2).................... 15
Listening through headphones ...................16
To display the MP3 information ..................16
Skip to the next folder (MP3) ......................16
Programmed Playback...................... 17
To check the programmed order .................18
To add a track to the end of
the program.............................................18
To overwrite the program............................18
To clear program...........................................18
TASTCAASMCACMD-C16D0-MXXKXll
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
1 − Introduction
Thank you for your purchase of the TASCAM
CD-160MKII Compact Disc Player.
safe place for future reference.
Before connecting and using the unit, please take time to
read this manual thoroughly to ensure you understand how
to properly set up and connect the unit, as well as the oper-
ation of its many useful and convenient functions. After
you have finished reading this manual, please keep it in a
Supplied accessories
In addition to this manual, the CD-160MKII has been
packed with the following:
Contact your TASCAM supplier if any of these items are
missing.
• RC-162C remote control unit ..........................................1
• A rack-mounting screw kit (screws and washers) ..........1
• AAA batteries for the remote control unit .....................2
• A waranty card................................................................1
Rack-mounting the unit
If you are mounting the unit in a rack, leave 1U of space
above it and 4 inch (10 cm) or more of space at the rear.
Use the rack-mounting kit to mount the unit in a standard
19-inch equipment rack, as shown in this section. Remove
the feet of the unit before mounting.
About this manual
In this manual, we use the following conventions:
• The names of keys and controls are given in the follow-
ing typeface: PROGRAM.
• When the alphanumeric portion of the display shows
a message, this is shown in the following typeface:
NONE.
• If a preset indicator in the display (i.e. one which cannot
change) is shown, this is shown as follows: EPS.
ꢄ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
1 − Introduction
Precautions and notes for placement and use
The CD-160MKII may be used in most areas, but to main-
tain top performance, and prolong operating life, observe
the following notes, precautions and environmental condi-
tions:
or service agency.
• When removing the power plug from the wall outlet,
always pull directory on the plug, never yank the cord.
• To keep the laser pickup clean, do not touch it and
always close the disc tray.
• Avoid exposing it to extremes of temperature and
humidity and avoid mechanical shocks and vibration.
• As the disc rotates at high speed during playback, do not
lift or move the unit. Doing so may damage the disc or
the laser assembly.
• Keep the unit away from strong magnetic fields (TV
sets, computer monitors, large electric motors, etc.).
• The voltage selector on the rear panel is only available
on units for the North American market. Please set this
to match your local supply. If you are in any doubt in
this matter, consult an electrician.
• The nominal temperature should be between 5°C and
35°C (41°F and 95°F).
• Relative humidity should be 30 to 90 percent.
• As the unit may become hot during operation, always
leave sufficient space above the unit for ventilation. Do
not install this unit in a confined space such as a book-
case, and do not put anything on top of the unit.
NOTE
• When transporting the unit, always use the origi-
nal packing materials. For this reason, we strongly
recommend that you save all the packing materials
that came with the CD-160MKII, in case you need to
transport it in the future.
• Avoid installing this unit on top of any heat-generating
electrical device such as a power amplifier.
• Make sure that the unit is mounted in a level position for
correct operation.
• In addition, when transporting the unit, you should
tape the disc tray closed, using an adhesive tape
that will not spoil the finish of the unit.
• Do not open the sealed cabinet as this might result in
damage to the circuitry or electrical shocks. If a foreign
object should get inside the unit, contact your supplier
Beware of condensation
If the unit (or a compact disc) is moved from a cold to a
warm place, or used after a sudden temperature change,
there is a danger of condensation; vapor in the air could
condense on the internal mechanism, making correct oper-
ation impossible. To prevent this, or if this occurs, let the
player sit for one or two hours at the new room temperature
before using.
Never use a stabilizer or printable discs
Using commercially available CD stabilizers or printable
recordable discs with this player will damage the mecha-
nism and cause it to malfunction.
NOTE
• Never use a disc that has had a stabilizer mounted
to it. The residual adhesive may cause the disc to
stick to the turntable of the CD-160MKll. If it sticks
to the turntable, you will need a technician to get it
out.
TASCAM CD-160MKll
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
1 − Introduction
About discs
• Conventional audio CDs bearing the COMPACT DISC
DIGITAL AUDIO logo on the label:
may not be playable.
• Copy-protected discs and other discs that do not
conform to the CD standard may not play back cor-
rectly in this player. If you use such discs in this unit,
TEAC Corporation and its subsidiaries cannot be
responsible for any consequences or guarantee the
quality of reproduction. If you experience problems
with such non-standard discs, you should contact
the producers of the disc.
• Properly finalized CD-R and CD-RW discs.
NOTE
• Depending on the quality of the disc and/or the
condition of the recording, some CD-R/CD-RW discs
Handling of compact discs
The CD-160MKII has been designed for the playback
of CD-DA (standard audio) format discs and MP3 files
recorded on the discs using the ISO9660 format: In addi
tape or stickers that have been removed. If they are
inserted into the player, they could stick to the internal
mechanism, requiring removal by a technician.
-
tion to ordinary 5-inch and 3-inch CDs.
•
•
Do not use cracked discs.
•
•
Always place the compact discs in the trays with their
label facing upward.
Only use circular compact discs. Avoid using non-circu
lar promotional, etc. discs.
-
To remove a disc from its case, press down on the center
of the disc holder, then lift the disc out, holding it care
fully by the edges.
-
•
•
The CD-160MKll cannot play unfinalized CD-R/RW
discs.
CD-R and CD-RW discs are sensitive to the effects of
heat and ultraviolet rays. It is important that they are not
stored in a location where direct sunlight will fall on
them, and which is away from sources of heat such as
radiators or heat-generating electrical devices.
•
Do not use any record spray, anti-static solutions, ben
zene, paint thinner or other chemical agents to clean
CDs as they could damage the delicate playing surface.
It may cause CDs to become unplayable.
-
•
When labeling CD-R and CD-RW discs, always use a
soft oil-based felt-tipped pen to write the information.
Never use a ball-point or hard-tipped pen, as this may
cause damage to the recorded side.
•
•
Discs should be returned to their cases after use to avoid
dirt as well as serious scratches that could cause the
laser pickup to “skip.”
Avoid getting fingerprints on the signal side (the non-
label side). Grime and dust may cause skipping, so keep
discs clean and store them in their cases when not being
played. To clean the signal side of a disc, wipe gently
with a soft dry cloth from the center towards the outside
edge.
•
•
If you are in any doubt as to the care and handling of a
CD-R and CD-RW discs, read the precautions supplied
with the disc, or contact the disc manufacturer directly.
Music discs with copy control, a copy-protection sys
-
tem, have been released form several record companies
in an attempt to protect the copyright. Since some of
these discs do not comply with the CD specifications,
they may not be playable on the CD-160MKII.
•
Keep discs away from direct sunlight, and places of
high heat and humidity. If left in such places, warping
could result.
•
•
Do not affix any labels or stickers to the label side of the
disc and do not use any protective coating spray.
Do not insert discs that have adhesive remaining from
ꢆ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
1 − Introduction
Use of the remote control unit
• Do not expose the infrared receiver (light receptive area
on the front panel) to direct sunlight or intense light for
extended periods of time. Long exposure to this light
may result in failure of the remote control sensor.
other devices that are turned on could be operated by its
signal.
• If the range of remote operation becomes smaller, or
commands do not always function properly, the batter-
ies have become weak and should be replaced. Always
replace both batteries with new batteries of the same
type.
• When the remote control will not be used over one
month, please remove the batteries to prevent the pos-
sibility of battery acid leakage which could damage
the unit. Should leakage occur, remove and discard the
batteries, and wipe the battery case thoroughly with a
cloth. Avoid getting the battery liquid on the skin. After
cleaning, replace with new batteries.
• Point the remote control to the remote sensor on the
main unit. Do not obstruct the path between the remote
control and the remote sensor.
• The remote control functions by using an infrared light
signal. When using the unit to control the CD-160MKII,
Batteries
If batteries are used improperly, or if leakage or breakage
occurs, the unit will not function.
ª
Inserting batteries
1. Open the lid.
Please observe the cautions indicated on the batteries and
their packaging to ensure proper usage.
2. Confirm +/- polarity, and insert two AAA batteries.
3. Close the lid.
• Confirm + and – polarity and follow the indications
when inserting new batteries into the remote control.
• Do not use old and new batteries together.
• Even if the battery is the same size, the voltage may
differ. Do not use batteries of different specifications
together.
• Do not attempt to recharge batteries that are non-
rechargeable.
• Do not open or disassemble batteries, throw them into a
fire or put them in water.
Connections
CAUTION
NOTE
•
•
•
Turn off the power of all the equipment before
making connections.
•
Be sure to connect the power cord to an AC outlet
which supplies the correct voltage. Hold the power
plug when plugging or unplugging the power
cord. Never pull or yank on the power cord.
Read instructions of each component you intend to
use with this unit.
Be sure to insert each plug securely. To prevent
hum and noise, do not bundle the connection cords
with the power cord.
CD-160MK#
Connect ANALOG OUTs (L,R) jacks to the input jack of
the amplifier with a RCA cable. Make sure to connect:
white plug
red plug
∑
white jack (L: left channel)
∑
red jack (R: right channel)
Use an optical cable to output the signal from the DIGITAL
OPTICAL OUT to the amplifier's input.
Use a RCA cable to output the signal from the DIGITAL
COAXIAL OUT to the amplifier's input.
After all other connections are complete, connect the plug
to the AC wall socket.
R
L
DIGITAL IN
ANALOG IN
DIGITAL IN
TASCAM CD-160MKll
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
2 − Features of the CD-160MKII
Front panel and RC-162C remote control unit
1
3
2
4
5
6
7
9
8
q w e
r
0
RC-162C remote control unit
7�PHONES jack and knob
For private listening, insert the headphones plug into
this jack, and adjust the volume by turning the level
knob.
8�PITCH CONTROL switch and knob
Use this switch to turn the pitch control function on
or off. When the function is on, the LED will light.
Adjust the amount by turning the knob.
t
9�Remote Sensor
When operating the remote control unit, point it
towards here.
e
0 Display
q SHUFFLE
y
u
q
w
Use this key for shuffle playback.
w REPEAT
r
6
Use this key for repeat playback.
5
4
e PROGRAM
Use this key to program tracks.
r MP3 FOLDER (§/¶)
During playback of a MP3 disc, use these keys to
select a folder in the disc.
t Numeric keys (remote control only)
Use these keys to select tracks.
y ESP/MP3 (remote control only)
1�POWER
Press this switch to turn the unit on or off.
During playback of a MP3 disc, use this key to search
track name. During playback of CD, use this key to
switch the ESP function on or off. The default setting
is off.
2�Disc tray
3�OPEN/CLOSE
Use this key to open and close the disc tray.
u INTRO CHECK (remote control only)
4�PLAY/READY (¥/π)
Use this key to start the Intro Check.
Use this key to start or pause playback of CD/MP3.
NOTE
5�STOP (ª)
• To simplify explanations, instructions in this manual
refer to the names of the keys and controls on the
front panel only. Associated controls on the remote
control will also operate similarly.
Use this key to stop playback of CD/MP3.
6�SEARCH (Ô/) / Â/¯ (SKIP)
Use these keys to skip tracks. Hold down these keys to
search for a part of a track.
10
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
2 − Features of the CD-160MKII
Rear panel
1
4
2 3
5
1 ANALOG OUTPUT L,R jacks (UNBALANCED)
Analog 2-channel audio signal is output from this jack.
2 DIGITAL COAXIAL OUTPUT jack
This RCA jack output SPDIF digital audio data to the
amplifier.
3 DIGITAL OPTICAL OUTPUT jack
This compatible connector output S/PDIF digital audio
data to the amplifier.
4 VOLTAGE SELECTOR
Switches the voltage to either 230 V or 120 V.
NOTE
• The voltage selector is only available on units for
North American market.
5 AC Power Cord
After all other connections are complete, connect the
plug to the AC wall socket.
TASCAM CD-160MKll
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2 − Features of the CD-160MKII
Display
5
6
12
3 4
7
8
9
1 SEARCH / SEARCH ALBUM
When the Search function is on, SEARCH or SEARCH ALBUM
is lit according to the selected mode.
2 SHUFFLE
SHUFFLE is lit when this function is on.
3 REPEAT display
When the Repeat function is on, the display shows the
repeat playback mode currently selected.
4 INTRO
INTRO is lit when this function is on.
5 MEMORY
MEMORY is lit when Program playback is on.
6 ESP display
(ESP) is lit when ESP (Electric Shock Protection) is on.
7 DISC / FOLDER display
Cdlights when a CD is loaded. When a MP3 disc
containing folders is loaded, the display shows the total
number of the folders.
8 Track number display
When a CD is loaded, the display shows the total num-
ber of tracks. When a MP3 disc containing folders is
loaded, the display shows the total number of the fold-
ers.
NOTE
• When in search mode (MP3 only), the initial letter of
a track name appears on the display (see "Search for
a name of track" on page 20).
9 Counter display
This shows the time information of the disc.
NOTE
• When in search mode (MP3 only), the display
shows a track name (see "Search for a name of
track" on page 20).
1ꢀ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
MP3 files and directories
CDs containing MP3 files can be played by the
CD-160MKII with the following limitations on the number
of files and directories.
Maximum number of directories: 200
Maximum number of MP3 files: 500
File format: MPEG 1/2/2.5 Layer2/3(ISO/IEC 11172-3,
ISO/IEC 13818-3.2)
Bit rate: 128kbps to 320kbps
Sampling frequency: 32 kHz/44.1 kHz/48 kHz, Mono or
Stereo
File extension: mp3, Mp3, mP3, MP3
NOTE
• The CD-160MKII can only read the files in the first
session of a multi-session disc.
• ID3 tag display for MP3 playback is not supported.
• If audio data is converted with Variable Bit Rate, it
may not be played back properly.
MP3 files are played as the order in the following diagram.
In this manner, playback is performed from the top level
directories.
: Folder (Directory)
: MP3 File
TASCAM CD-160MKll
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
Listening to CD/MP3 (1)
When a CD is loaded:
2
3
4
total tracks
total playing time
1
5
When a MP3 disc is loaded:
1. Press the POWER switch to turn the unit on.
total number of folders
2. Press the OPEN/CLOSE key.
total tracks
5. Press the PLAY/READY key (Á/π) to start play-
back.
3. Place a disc on the tray with the printed label face
up.
Playback starts from the first track of the disc.
When the playback of all the tracks has finished,
the unit stops automatically.
NOTE
• MP3 tracks recorded out of folders are automatically
put in the “ROOT” folder, and playback starts from
the first track of the ROOT folder.
CAUTION
• Never place more than one disc on the tray.
• The disc must be loaded centrally into the disc tray.
If the disc is not correctly loaded, it may not be pos-
sible to open the tray again once it has closed, so
you should ensure the disc is always centrally load-
ed in the tray.
• Do not force the tray by hand during opening and
closing operations.
4. Press the OPEN/CLOSE key to close the CD door.
It takes a few seconds for the unit to load the disc.
No keys will work during loading. Wait until the
total number of the tracks and the total play time
of the disc are displayed.
When no disc is loaded in the CD player, NO
DISCis displayed.
1ꢂ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
Listening to CD/MP3 (2)
edly until the track you want to listen to is found. Press the
Play/Pause key (¥/π) to start playback from the selected
track.
ª
mode)
To suspend playback temporarily (pause
During playback, when the  key is pressed, the track
being played will be played from the beginning. To return
to the beginning of the previous track, press the  key
twice.
During programmed playback, the next or previous track
in the program is played.
Press the PLAY/READY key (Á/π) during playback.
Playback stops at the current position. To resume playback,
press the PLAY/READY key (Á/π) again.
ª
Direct Playback
While in stop or playback mode, you can use the numeric
keys of the remote control unit to select a track.
Select a track using the numeric keys, and within 10 sec-
onds press the PLAY/READY key.
ª
To stop playbacks
Press the STOP key (ª) to stop playback.
Playback starts from the selected track.
ª
Search for a part of a track
For instance, to select track number 35, press 3 and 5.
During playback, hold down the skip key (Â or ¯)
and release it when the part you want to listen to is found.
To play tracks 1 to 9, simply press the corresponding keys
(1 to 9).
NOTE
• Direct playback isn’t possible during shuffle play-
back and programmed playback.
ª
Pitch control
NOTE
• Changing pitch rapidly during playback may cause
noise problems.
• When you use the Pitch Control function, no signal
is output from the DIGITAL OUT.
ª
To skip to the next or a previous track
1. Press the PITCH CONTROL key in the stop mode.
The LED will light.
2. Turn the PITCH CONTROL knob right or left to
change pitch.
3. Turning right makes playback speed faster within
the range 0 to +12%.
During playback, press the skip key (Â or ¯) repeat-
edly until the desired track is found. The selected track
will be played from the beginning.
4. Turning left makes playback speed slower within
the range 0 to –12%.
In the stop mode, press the skip key (Â or ¯) repeat-
TASCAM CD-160MKll
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
ª
Listening through headphones
ª
To display the MP3 information
WARNING
• Always lower the volume level prior to plugging
in your headphones. TO AVOID DAMAGING YOUR
HEARING. Do not place your headphones on your
head until after you have plugged them in.
For private listening, insert the plug from your headphones
into the PHONES jack, and adjust the volume by turning
the LEVEL knob.
During playback of MP3 disc, press the MP3 key for more
than 1 second. The information about the current track is
displayed as follows:
Filename w Title w Artist w Album
NONEappears when there is no information.
UNKNOWNappears when the unit cannot read the infor-
mation.
Press the MP3 key for more than 1 second again to cancel
the MP3 information mode.
ª
Skip to the next folder (MP3)
Press the MP3 FOLDER keys to skip folders.
The ESP (Electronic Shock Protection) stores the music
in the buffer to prevent sound from skipping.
During playback of a CD, press the ESP key to turn the
ESP on or off. When you turn the ESP on, 40 SEC (40
seconds) briefly appears, and the ESP indicator lights on the
display.
The ESP indicator blinks while the unit is filling the buffer.
NOTE
• When the unit is on the stable place and free from
mechanical shocks, you can turn this function off.
• During playback of MP3, this function is always ON.
1ꢄ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
Programmed Playback
Up to 64 tracks can be programmed in the desired order.
• Skip this step when playing a CD.
Shuffle function doesn’t work during programmed play-
back.
3. Press the numeric keys (or press the skip key (Â
or ¯) repeatedly) to select a track, then press the
PROGRAM key.
1. Press the PROGRAM key in the stop mode.
CD
MP3
The MEMORY indicator appears on the display.
• To cancel the program mode, press the STOP key (ª).
The track is programmed, and P-02is displayed.
2. Press the numeric keys (or press the skip key (Â
or ¯) repeatedly) to select a folder on a MP3
disc, then press the PROGRAM key.
• Repeat steps 2 and 3 to program more tracks.
• You can program up to 64 tracks.
4. When the selection of track numbers is completed,
press the PLAY/READY key (¥/π) to start pro-
grammed playback.
• When the playback of all the programmed tracks has
finished, or if the STOP key is pressed, the MEMORY
indicator will go off and the program mode will be can-
celled.
The program is retained in memory until the OPEN/
CLOSE key or the POWER switch is pressed. You can
return to the programmed playback by pressing the
PROGRAM key and the PLAY/READY key (¥/π).
• MP3 tracks recorded out of folders are in the “01”
(ROOT) folder.
TASCAM CD-160MKll
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
ª
To check the programmed order
ª
To overwrite the program
In the stop mode, press the PROGRAM key repeatedly
until the program number to be changed appears on the
display.
Select a new track number using the numeric keys or the
skip key (Â or ¯) and then press the PROGRAM key.
ª
To clear program
In the stop mode, press the PROGRAM key repeatedly.
The track number and program number will be shown on
the display.
ª
To add a track to the end of the program
In the stop mode, press the PROGRAM key repeatedly
until 00appears on the display. Select a track number
using the numeric keys or the skip key (Â or ¯) and
then press the PROGRAM key. The track is added to the
end of the program.
To clear the programmed contents, press the PROGRAM
and the STOP key ( ) in the stop mode.
ª
• If the OPEN/CLOSE key or the POWER switch is
pressed, the programmed contents will also be cleared.
1ꢆ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
Repeat Playback
ª
Repeat one track (REPEAT)
Press the REPEAT key once during playback. REPEAT lights.
The track being played will be played repeatedly. If you
press the skip key (Â or ¯) and select another track,
the track you selected will be played repeatedly.
It is also possible to select a track to be repeated in the stop
mode. Press the REPEAT key, select a track using the skip
key (Â or ¯), and then press the PLAY/READY key
(G/J) to start playback.
Every time the REPEAT key is pressed, the mode is
changed as follows:
When a CD is loaded:
REPEAT
REPEAT ALL
(off)
ª
Repeat all the tracks (REPEAT ALL)
All the tracks will be played repeatedly.
Press the REPEAT key twice. REPEAT ALL lights.
When a MP3 disc is loaded:
During programmed playback, programmed tracks will be
played repeatedly.
REPEAT REPEAT ALL REPEAT ALBUM
(off)
ª
Repeat all the tracks in the folder (REPEAT
NOTE
ALBUM) (MP3 only)
• The Repeat mode will be canceled if one of the fol-
lowing keys is pressed: STOP, INTRO CHECK, POW-
ER, OPEN/CLOSE.
All the tracks in the folder will be played repeatedly.
Press the REPEAT key three times. REPEAT ALBUM lights.
Shuffle Playback
• If you press the ¯ key during shuffle playback, next
track will be randomly selected and played. If you press
the  key, the currently played track will be played
from the beginning. A track cannot be replayed during
shuffle playback.
• Shuffle playback doesn’t work during programmed
playback.
• If one of the following keys is pressed, shuffle mode
will be cancelled: SHUFFLE, STOP, INTRO CHECK,
POWER, OPEN/CLOSE.
The tracks can be played randomly. Press the SHUFFLE
key during playback or when in the stop mode. SHUFFLE will
then light up in the display.
Intro Check
a track you want to listen to is found, press the INTRO
CHECK key to resume normal playback.
• To skip to the next or a previous track, press the skip
key.
• To stop Intro Check function, press the STOP key.
• Repeat and shuffle playback don’t work during the intro
check.
• If one of the following keys is pressed, the intro check
mode will be cancelled: INTRO CHECK, SHUFFLE,
STOP, POWER, OPEN/CLOSE.
Press the INTRO CHECK key in the stop or play mode.
The INTRO indicator lights on the display, and the begin-
ning of all the tracks is played for 10 seconds each. When
TASCAM CD-160MKll
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
Search Mode (MP3 only)
Search for a name of track
You can select the track by searching for its name.
1. Press the MP3 key once.
4. Select the track that has same initial letter by
pressing the skip key (Â or ¯).
An alphabet (initial letter of a track name) and a track
name are displayed.
Track name
Track number
5. Press the PLAY/READY key (¥/π).
Playback starts from the selected track.
Initial letter of track name
• To cancel the search mode, press the STOP key (ª).
2. Select the initial letter of the track you want to lis-
ten to by pressing the skip key (Â or ¯).
3. Press and hold the skip key (Â or ¯).
ꢀ0
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
3 − Disc operations
Search for a track in a folder
1. Press the MP3 key twice.
4. Select the track in the folder by pressing the skip
key (Â or ¯).
5. Press the PLAY/READY key (¥/π) to start playback.
The name of folder is displayed.
2. Press the skip key (Â or ¯) to find the folder
that the track you want to listen to is included.
Playback starts from the selected track.
• If you skip steps 3 and 4, playback will start from the
first track in the selected folder.
• MP3 tracks recorded out of folders are in the “ROOT”
folder.
3. Press and hold the skip key (Â or ¯).
TASCAM CD-160MKll
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
4 − Reference and specifications
Troubleshooting
If you have problems with your system, look through this
chart and see if you can solve the problem yourself before
calling your dealer or TEAC service center.
ª
Will not play.
eLoad a disc with the playback side facing down.
eIf the disc is dirty, clean the surface of the disc.
eA blank disc has been loaded. Load a prerecorded disc.
ª
No power
eDepending on the disc, etc. it may not be possible to
play back CD-R/RW discs. Try again with another disc.
eCheck the connection to the AC power supply. Check
and make sure the AC source is not a switched outlet and
that, if it is, the switch is turned on. Make sure there is
power to the AC outlet by plugging another item such as a
lamp or fan into the outlet.
eYou cannot play back unfinalized CD-R/RW discs.
Finalize such a disc in a CD recorder and try again.
ª
Sound skips.
ª
Remote control doesn’t work.
ePlace the unit on a stable place to avoid vibration and
shock.
ePress the POWER switch of the main unit to turn it on.
eIf the batteries are dead, change the batteries.
eIf the disc is dirty, clean the surface of the disc.
eUse remote control unit within the range (5 m) and point
eDon’t use scratched, damaged or warped discs.
at the front panel.
eClear obstacles between the remote control unit and the
main unit.
If normal operation cannot be recovered, unplug the
power cord from the outlet and plug it again.
eIf a strong light is near the unit, turn it off.
ª
No sound
eCheck the connection to the amplifier.
eCheck the operation of the amplifier.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth
or use diluted mild liquid soap. Never spray liquid directly
on this unit. Apply your cleaner to your cleaning cloth and
wipe gently. Be sure to remove any excess completely. Do
not use thinner, benzene or alcohol as they may damage
the surface of the unit. Allow the surface of the unit to dry
completely before using.
ꢀꢀ
TASCAM CD-160MKll
Download from Www.Somanuals.com. All Manuals Search And Download.
4 − Reference and specifications
Specifications
CD Player
Pickup
Digital filter
3-beam, semiconductor laser
8-times oversampling
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio (S/N)
Output
20 Hz - 20 kHz 2dB
Less than 0.03 % (1 kHz, ESP off)
More than 83 dB (IHF-A, ESP off)
Analog: Nominal output level -10 dBV
Maximum output level +6 dBV 2dB
Digital: Coaxial / IEC-60958-3 (S/PDIF)
Optical / IEC-60958-3 (S/PDIF)
General
Power Requirement
AC 120 V, 60 Hz (U.S.A./Canada)
AC 230 V, 50 Hz (U.K./Europe)
AC 240 V, 50-60Hz (Australia)
10 W (U.S.A./Canada)
Power Consumption
10 W (U.K./Europe)
10 W (Australia)
Dimensions (W x H x D)
Weight
481 x 94.5 x 298 (mm) / 18.94 x 3.72 x 11.73 (in)
4.1 kg (9.0 lb)
Dimensions
481.0 mm (18.94")
465.0 mm (18.30")
298.0 mm (11.73")
285.5 mm (11.24")
6.4 mm (0.25")
TASCAM CD-160MKll
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
»
CD-160MK#
TEAC CORPORATION
Phone: +81-422-52-5082
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan
TEAC AMERICA, INC.
Phone: +1-323-726-0303
Printed in China
7733 Telegraph Road, Montebello, California 90640
TEAC CANADA LTD.
Phone: +1905-890-8008 Facsimile: +1905-890-9888
5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada
TEAC MEXICO, S.A. De C.V
Phone: +52-555-581-5500
Campesinos No. 184, Colonia Granjes Esmeralda, Delegacion Iztapalapa CP 09810, Mexico DF
TEAC UK LIMITED
Phone: +44-8451-302511
Unit 19 & 20, The Courtyards Hatters Lane, Watford, Hertfordshire. WD18 8TE, U.K.
TEAC EUROPE GmbH
Phone: +49-611-71580
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany
Download from Www.Somanuals.com. All Manuals Search And Download.
|