Quick Installation Guide
TEW-687GA
1.01
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You Start
Package Contents
ŸTEW-687GA
ŸCD-ROM (User's Guide)
ŸMulti-Language Quick Installation Guide
ŸPower Adapter (12V DC, 0.5A)
ŸNetwork Cable (0.6m/2ft.)
System Requirements
ŸA computer with network adapter installed
ŸWireless router (e.g. TEW-691GR) or access point (e.g TEW-690AP)
ŸAn available DHCP Server – wireless routers usually have a built-in DHCP server
ŸA media device (e.g. Blu-ray player, Internet-ready TV, etc.) or game console with
an Ethernet port
ŸWeb Browser: Internet Explorer (6.0 or higher)
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2. Hardware Installation
Note:
1. Wi-Fi Protected Setup (WPS) allows you to quickly connect to your wireless router or
access point. If you would like to use WPS push button setup, please go directly to
section 4. Wi-Fi Protected Setup (WPS) Push Button Setup. If your wireless router or
access point does not support WPS, continue on to step 1.
2. Do not connect/install the TEW-687GA to your network until instructed to do so. Make
sure your computer's network adapter settings are set to obtain an IP address
automatically (see troubleshooting section).
1. Connect one end of the provided RJ-45 network
cable to the TEW-687GA's LAN port. Connect
the other end of the cable to your computer's
network port. Then boot up your computer.
2. Connect the Power Adapter to the TEW-687GA
and then to a power outlet. (EU versions will
have a power button on the back. Push the
power button to the “On” position). Wait 30
seconds for the TEW-687GA to boot up.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3. Verify that the following panel lights are on:
Power, Network Port, and Wireless.
Wireless (Blue/Blinking)
Network Port (Blue/Blinking)
Power (Blue/Solid)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
3. Configure the TEW-687GA
1. Open your web browser, type
and then press Enter.
2. Enter the User Name and password and then
click OK. Default Settings:
User name: admin
Password: admin
Note: User name and Password are case
sensitive.
3. The Wizard will automatically appear. Click
Administration Ž Wizard if the Wizard does
not automatically appear.
4. Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5. Select DHCP Client to have the TEW-687GA
automatically obtain an IP address from your
DHCP server (router).
If Static IP address is selected you would need
to configure the following:
IP address: The assigned IP address should
match your network. This IP address should
not be used by any other network device on
your network.
Subnet Mask: In most cases, the default
Subnet Mask (255.255.255.0) should be fine.
Default Gateway: Enter the IP address of your
router for the Default Gateway.
Then click Next.
Note: It is recommended to manually configure
the LAN Interface Settings (IP address, Subnet
Mask, Default Gateway) in case you need to
access the device in the future. Please write
down the IP settings for future reference.
6. Select Manual Setup and then click Next.
7. Click Scan.
8. Select a SSID and then click Select. The SSID
is the wireless network name of your wireless
network (e.g. wireless router or access point).
9. Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
10. If Encryption is enabled on your wireless
network (e.g. access point or wireless router)
the correct Security Mode and Algorithm will
automatically be selected. Enter the Pass
Phrase (wireless network password) and then
click Apply.
11. Verify that your settings are correct and then
click Apply.
12. Click OK.
13. Wait while your settings are being applied.
14. Click Export Setting (optional). This saves
your configuration settings in a file, which can
be reloaded when needed.
15. Click Save (optional).
16. Give the file a name, then click Save.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
17. Click Exit Wizard.
Note: Follow the steps below to connect your media device (e.g. Blu-ray player,
Internet ready TV, etc.) or game console to the TEW-687GA.
18. Unplug the power adapter and disconnect the
TEW-687GA from your computer. Place the
TEW-687GA in your desired location. Please
refer to the Wireless Tips section for optimal
placement of the TEW-687GA.
19. Plug the power adapter of the TEW-687GA
and connect one end of a network cable to
the TEW-687GA's LAN port. Connect the
other end of the cable to your media device
(e.g. Blu-ray player, Internet ready TV, etc.)
or game console's network port. Verify that
the following panel lights are on: Power
(Blue/Solid), Network Port, (Blue/Blinking),
and Wireless (Blue/Blinking).
20. Verify that your media device or game console
is connected to your network. If the network
setting on your media device or game console
is set to obtain an IP address automatically
(dynamic IP) an IP address will be assigned
automatically. Please refer to the manual or
contact your media device or game console's
technical support for instructions.
Configuration is complete
For detailed information regarding the TEW-687GA’s configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
Thank you for choosing TRENDnet
Download from Www.Somanuals.com. All Manuals Search And Download.
7
4. Wi-Fi Protected Setup (WPS) Push Button Setup
Note:
1: Wi-Fi Protected Setup (WPS) allows you to quickly connect to your wireless router or
access point.
2: Do not connect/install the TEW-687GA to your network until instructed to do so. Make
sure your network adapter settings are set to obtain an IP address automatically (see
troubleshooting section).
1. Find a location where you would like to place
the TEW-687GA. The location must be within
the wireless coverage of your router or access
point. Please refer to the wireless tips sections
for additional information.
2. Connect the Power Adapter to the TEW-687GA
and then to a power outlet. (EU Versions will
have a power button on the back. Push the
power button to the “On” position. ). Wait 30
seconds for the TEW-687GA to boot up.
3. Press and hold the WPS button on your
wireless router or access point for 2 seconds.
The example shows a TEW-691GR.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
4. Within 60 seconds press and hold the WPS
button on the TEW-687GA for 2 seconds. The
WPS button will start to blink.
5. Once the WPS button becomes steady blue
(approximately within 120 seconds), the
TEW-687GA has been successfully configured.
6. Connect one end of a network cable to the
TEW-687GA's LAN port. Connect the other
end of the network cable to your media device
or game console's network port. Verify that the
panel lights are on: Power (Blue/Solid),
Network Port (1-4) (Blue/Blinking), and
Wireless (Blue/Blinking).
7. Verify that your media device or game console
is connected to your network. If the network
setting on your game console or media device
is set to obtain an IP address automatically
(dynamic IP) an IP address will be assigned
automatically. Please refer to the manual or
contact your media device or game console's
technical support for instructions.
Configuration is now complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Troubleshooting
message says “The page cannot be displayed.” How can I get into the TEW-687GA's web
configuration page?
1. Check your hardware settings again by following the instructions in section 2.
2. Make sure the Network Port and Wireless lights are lit.
TEW-687GA.
4. Make sure your network adapter’s TCP/IP settings are set to Obtain an IP address
automatically (see the steps below).
Windows 7
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Change
Adapter Settings and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on
Obtain an IP address automatically.
Windows Vista
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Manage
Network Connections and then right-click the Local
Area Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on Obtain
an IP address automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Windows XP/2000
1. Go into the Control Panel, double-click the Network
Connections icon and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol (TCP/IP) and then click
Properties. Then click on Obtain an IP address
automatically.
5. Reset the TEW-687GA. Take a pin or paperclip and press the RESET button for 15
2. My Nintendo Wii does not have an Ethernet port. Can I use this with my Wii?
You will need to install a USB to Ethernet adapter on your Wii. The TRENDnet TU2-ET100
information regarding the TU2-ET100.
3. I completed all the steps in the quick installation guide, but the TEW-687GA is not
connecting to my wireless network (e.g. wireless router or access point). What should I do?
1.Verify that the SSID (Wireless Network Name) matches your wireless router or access point's
SSID (Wireless Network Name).
2.Check with your network administrator for security key in order to access a secured wireless
access point or router. Please refer to the User's Guide for more information regarding
wireless network security.
3.Please refer to the Wireless tips section if you continue to have wireless connectivity
problems.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
4. I connect the TEW-687GA to my game console, but I am unable to play games online.
What should I do?
1. Verify that a computer can get online through the router wirelessly.
2. Verify that the network setting on your game console is set to obtain an IP address
automatically (dynamic IP). Please refer to the manual or contact your game console's
technical support for instructions.
3. Power cycle the TEW-687GA and your wireless router or wireless access point. Unplug the
power to the TEW-687GA and your wireless router or wireless access point. Wait 15
seconds, then plug the power to your wireless router or access point back in. Wait 15
seconds, then plug the power to your TEW-687GA back in.
4. Factory reset the TEW-687GA and reconfigure your settings. To reset the TEW- 687GA, take
a pin or paper clip and press the reset button for 15 seconds, then let go. The reset button is
section 3 or connect using WPS by following section 4.
5. I followed the Quick Installation Guide and setup a new password. When I log in to the
browser configuration an access error message appears. What should I do?
The default user name and password is admin. When you log in to the browser configuration
for the first time, make sure to enter admin for user name and password. Do not leave the user
name field blank. If the password was changed and you don't remember it, you need to reset
the TEW-687GA. To reset the TEW-687GA, power up the unit and wait 30 seconds for the unit
to boot up. Then take a pin or paper clip and press the reset button for 15 seconds, then let go.
The reset button is located on the bottom of the TEW-687GA. Please note that performing a
reset on the TEW-687GA will erase all settings applied and will revert back to default settings.
section 3 or connect using WPS by following section 4.
6. Do I need a gaming console in order to use this device?
The TEW-687GA is compatible with any Ethernet-enabled device.
If you still encounter problems or have any questions regarding the TEW-687GA, please contact
TRENDnet's Technical Support Department.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Wireless Tips
The following are some general wireless tips to help minimize the impact of interference within an
environment.
Assign your network a unique SSID
Do not use anything that would be identifying like “Smith Family Network”. Choose
something that you would easily identify when searching for available wireless networks.
Do not turn off the SSID broadcast
The SSID broadcast is intended to be on and turning it off can cause connectivity issues.
The preferred method of securing a wireless network is to choose a strong form of encryption
with a strong and varied encryption key.
Note: after setting up the SSID, encryption type and encryption key/passphrase, please
make a note of them for future reference. You will need this information to connect your
wireless computers to the wireless router/access point.
Change the channel
Most wireless access points and routers are defaulted to channel 6. If you have a site survey
tool that will display the channels you can plan your channel selection around neighboring
access points to minimize interference from them. If your site survey tool does not display
the channel try using channels 1 or 11.
Change the channel bandwidth
If you are using 802.11n you should be securing the network with WPA2 security.
Note: Due to Wi-Fi certification considerations if you choose WEP, WPA or WPA2-TKIP
encryption this device may operate in legacy wireless mode (802.11b/g). You may not get
802.11n performance as these forms of encryption are not supported by the 802.11n
specification.
Avoid stacking hardware on top of each other to prevent overheating issues
Maintain enough free space around the hardware for good ventilation and airflow. There
should also be plenty of free space around the antennas to allow the wireless signal to
propagate. Please also make sure that the wireless hardware is not placed in any type of
shelving or enclosures.
There are a number of other environmental factors that can impact the range of wireless
devices.
1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at
an angle. The more material the signal has to pass through the more signal you will lose.
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of
a wireless device. Position the wireless devices in a manner that will minimize the amount
of obstructions between them.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
3. Building materials can have a large impact on your wireless signal. In an indoor
environment, try to position the wireless devices so that the signal passes through less
dense material such as dry wall. Dense materials like metal, solid wood, glass or even
furniture may block or degrade the signal.
4. Antenna orientation can also have a large impact on your wireless signal. Use the wireless
adapter's site survey tool to determine the best antenna orientation for your wireless
devices.
5. Interference from devices that produce RF (radio frequency) noise can also impact your
signal. Position your wireless devices away from anything that generates RF noise, such
as microwaves, HAM radios, Walkie-Talkies and baby monitors.
6. Any device operating on the 2.4GHz frequency will cause interference. Devices such as
2.4GHz cordless phones or other wireless remotes operating on the 2.4GHz frequency
can potentially drop the wireless signal. Although the phone may not be in use, the base
can still transmit wireless signals. Move the phone's base station as far away as possible
from your wireless devices.
If you are still experiencing low or no signal consider repositioning the wireless devices or installing
additional access points. The use of higher gain antennas may also provide the necessary
coverage depending on the environment.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2011, All Rights Reserved. TRENDnet.
|