15-INCH
TFT-LCD MONITOR
15RTV
INSTRUCTION MANUAL
Please read this manual thoroughly before use, and keep it handy for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Read all of these instructions.
2. Save these instructions for later use.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart, stand or table.
The product may fall, causing serious damage to the product.
7. Slots and openings in the cabinet and the back are provided for ventilation: to ensure reliable
operation of the product, these openings must not be blocked by placing the product on a bed,
sofa, rug or other similar surface.
This product should never be placed near or over a heat register.
This product should not be placed in a built-in installation unless proper ventilation is provided.
8. This product should be operated from the type of power source indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local power
company.
9. This product is equipped with a 3 wire grounding type plug having a third(grounding) pin. This
is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the purpose of the grounding-type plug.
10. Do not allow anything to rest on the power cord.
Do not locate this product where persons will walk on the cord.
11. If an extension cord is used with this product, make sure that the total of the ampere ratings
on the products plugged into the extension cord do not exceed the extension cord ampere
rating. Also, make sure that the total of all products plugged into the wall outlet does not
exceed 10 amperes.
12. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Never spill any kind of liquid on the product.
13. Do not attempt to service this product yourself, as opening or removing covers may expose
you to dangerous voltage points or other risks.
INSTRUCTION MANUAL………………………………………………………………………………
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Refer all servicing to service personnel.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions.
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the Product does not operate normally when the operating instructions are followed. Adjust
only those controls that are covered by the operating instructions since improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore normal operation.
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance, indicating a need for service.
CAUTIONk
The power supply cord is used as the main disconnect device, ensure that the
socket-outlet is located/installed near the equipment and is easily accessible.
ATTENTIONN
Le cordon d`alimentation est utillsé comme interrupteur général. La prise de
courant doit être située ou installée à proximité du matériel et être facile
d`accès
3 ……………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
▶ NEVER REMOVE THE BACK COVER
Removal of the back cover should be carried out only by qualified personnel.
▶ DO NOT USE IN HOSTILE ENVIRONMENTS
To prevent shock or fire hazard, do not expose the unit to rain or moisture.
This unit is designed to be used in the office or home. Do not subject the unit to vibrations,
dust of corrosive gases.
▶ KEEP IN A WELL VENTILATED PLACE
Ventilation holes are provided on the cabinet to prevent the temperature from rising.
Do not cover the unit or place anything on the top of unit.
▶ AVOID HEAT
Avoid placing the unit in direct sunshine or near a heating appliance.
▶ TO ELIMINATE EYE FATIGUE
Do not use the unit against a bright back ground and where sunlight or other light sources will
shine directly on the monitor.
▶ BE CAREFUL OF HEAVY OBJECT
Neither the monitor itself nor any other heavy object should rest on the power cord.
Damage to a power cord can cause fire or electrical shock.
INSTRUCTION MANUAL …………………………………………………………………………… 4
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio, TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by
the grantee or manufacturer could void the users authority to operate such equipment.
▶ DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus set out in the radio interference regulation of Canadian Department of
communications.
.
5 ……………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
A. BOTTOM PANEL CONTROL
1
3
4
2
5
6
8
7
10
11
9
1. DC 12V IN
2. D-SUB IN
PC Signal Input
3. VIDEO 1(AV1) IN
Composite signal Input for AV1
4. VIDEO 1(AV1) OUT
Video looping output for AV1
5. VIDEO 2(AV2) IN
Composite signal Input for AV2
6. VIDEO 2(AV2) OUT
Video looping output for AV2
7. AUDIO L IN
Stereo Audio L Signal Input, This input is for AV1, AV2, S-VIDEO
8. AUDIO R IN
Stereo Audio R Signal Input, This input is for AV1, AV2, S-VIDEO
9. S-VIDEO (Y/C) IN
Y/C separated signal input
10. S-VIDEO (Y/C) OUT
Y/C separated signal looping output
11. PC STEREO IN
INSTRUCTION MANUAL…………………………………………………………………………… 6
Download from Www.Somanuals.com. All Manuals Search And Download.
B. REMOTE CONTROLLER
1. POWER(
)
Turns the power ON or OFF. There will be a few
seconds delay before the display appears.
2. SOURCE
Select pc or video( PC / AV1 / AV2 / S-Video ) sources.
3. MUTE
Mute the sound.
4. MENU
Activates and exits the On Screen Display.
5. VOL(
)
Increases or decreases the level of audio volume.
6. UP/DOWN(
Move to OSD menu.
7. AUTO
)
Auto geometry adjustment in PC Source.
8. EXIT
Exit the On Screen Display.
7 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
4
5
6
7
8
3
1. SOURCE
Select input source, and move the previous menu.
2. MENU
Activates and exits the On Screen Display.
This button can also be used to move previous menu or status.
OSD MENU(MAIN) : Input Source, Screen, Audio, OSD, Color, Utility, Exit.
3/4. DOWN / UP
This button allows user to enter the sub-menu of the activated function
when down key is pressed on the main menu.
5/6. ◀ VOL ▶
Adjust the volume / Adjust menu settings.
7. IR Sensor
Remote controller sensor.
8. POWER ON/OFF(
)
Turns the power ON or OFF. There will be a few seconds delay before the display appears.
The power LED(next to the power switch) lights with green when the power is turned ON.
The power is turned off by pressing the power switch again and the power LED goes Red.
INSTRUCTION MANUAL…………………………………………………………………………… 8
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SELF-TEST DISPLAY
When there is no connection at PC, the On Screen Display will show for 3 seconds.
2. OSD MENU DESCRIPTION
: Input Source
Select PC or AV1, SVIDEO.
9 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
: Screen
: Brightness
Increase or decrease the intensity of the image.
: Contrast
Increase or decrease the intensity (lightness or dimness) of the image.
: H. position (PC Mode Only)
Move image horizontally on screen right or left.
: V. position (PC Mode Only)
Move image vertically on screen up or down.
: Clock (PC Mode Only)
Adjust the vertical noise of screen image.
: Phase (PC Mode Only)
Adjust the number of horizontal picture elements.
INSTRUCTION MANUAL…………………………………………………………………………… 10
Download from Www.Somanuals.com. All Manuals Search And Download.
: Audio
: Volume
Adjust audio volume.
11 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
: OSD
: H. Position
Move the OSD position to right(▶) or left(◀).
: V. Position
Move the OSD position to up(▶) or down(◀).
: Transparency
Select the OSD background.
: OSD Timer
Select the OSD display timing.
: Language
Select a language among English, Français, Deutsch, Español, Danish, Italiano.
INSTRUCTION MANUAL…………………………………………………………………………… 12
Download from Www.Somanuals.com. All Manuals Search And Download.
: Color (PC Mode)
: Color Temp
Adjust color temperature to 9300, 6500, user.
(note : 9300 is factory default)
: Red
Adjust red color for user.
: Green
Adjust green color for user.
: Blue
Adjust blue color for user.
13 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
: Utility
: Recall
Select to reset all setting to the factory default values.
: Lock
Select ON or OFF (ON : Control key lock. OFF : Control key unlock)
: Exit
H :15.7KHz
V : 60.0Hz
: Exit
Turn off OSD Menu.
INSTRUCTION MANUAL…………………………………………………………………………… 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Wall-mount installation:
1) Remove the pedestal mount installed on the monitor.
2) Use the VESA standard mounting design and the 100mm hole pattern on the back panel
to install the LCD monitor to the (optional) mounting bracket sold separately. (Screws supplied
with the mounting bracket.)
15 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
▶ PIN ASSIGNMENTS
▶ ACCESSORY
1. POWER CORD
2. USER’S MANUAL
3. PC cable
4. Adaptor
5. Remote Control
6. Batteries
7. Wall mount (Option)
INSTRUCTION MANUAL…………………………………………………………………………… 16
Download from Www.Somanuals.com. All Manuals Search And Download.
This monitor features a power management system to “power down” upon receipt of the
VESA DPMS(The display power management signaling) from a VESA DPMS video card.
The VESA DPMS-compliant video card performs this signaling system through not sending
horizontal, vertical, or sync signal.
This monitor enters an appropriate mode through identifying each of the three modes of the
signaling system.
POWER CONSUMPTION
MODE
ON
POWER CONSUMPTION
< 36W
< 5W
< 5W
< 5W
STANDBY
SUSPEND
ACTIV OFF
LED INDICATOR
The power management feature of the monitor is comprised of four stages : On(Green),
Standby, Suspend, Active off(Amber) and Unsupported mode(Green).
17 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
▶ LCD Type
15˝ Diagonal AM-TFT(Active-Matrix)
Pixel pitch (mm) : 0.297(H) 0.297(V)
BRIGHTNESS: 250cd/㎡(Typical)
CONTRAST RATIO: 450:1(Typical)
RESPONSE TIME: 12msec (Typical)
▶ RESOLUTION(H x V)
1024X768 @ 60Hz
▶ FREQUENCY
HORIZONTAL : 30KHz - 48KHz
VERTICAL : 56Hz - 75Hz
▶ INPUT SIGNAL
RGB (Analog 0.7Vp-p / 75Ω)
SYNC(Separate TTL Level)
AV(2ch input 1.0Vp-p, 75Ω terminated, loop-through out)
S-VIDEO(1ch input (Y/C) , loop-through out),
AV(composite) Sound in
PC Stereo Sound
▶ ACTIVE DISPLAY AREA (W x H)
304.1mm X 228.1mm
▶ DIMENSIONS (W x D x H) (With Stand)
351mm X 348mm X 200mm
▶ WEIGHT
Net Weight : 3.7Kg
Gross Weight : 5.7Kg
▶ ELECTRICAL RATINGS
DC 12V/3A
▶ NOTE :
Technical specifications are subject to change without notice.
INSTRUCTION MANUAL…………………………………………………………………………… 18
Download from Www.Somanuals.com. All Manuals Search And Download.
“Going to Sleep”
message on screen
WEEE Symbols
Correct Disposal of This Product
(Waste Electrical &Electronic
Equipment)
(Applicable in the European Union and other
European countries with separate collection systems)
This marking shown on the product or its literature,indicates
that it should not be disposed with
other household wastes at the end of its working life.To
prevent possible harm to the
environment or human health from uncontrolled waste
disposal,please separate this from other
types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product,or their
local government office,for details of where and how they
can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase
contract.This product should not be mixed with other
commercial wastes for disposal.
19 …………………………………………………………………………… INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|