the evolution revealed
Download from Www.Somanuals.com. All Manuals Search And Download.
&
&
PERFORMANCE
TS8
TS10
Output power
200W RMS
300W RMS
Low frequency response
Limit for usable output
Inputs
32Hz(-6dB)
18Hz
29Hz(-6dB)
16Hz
2 x line level phone
2 x XLR balanced
2 x XLR balanced
(direct or 80Hz high pass)
2nd order low pass,
50Hz - 150Hz, -6dB
After approximately 12 mins.
in absence of input signal
2 x line level phone
2 x XLR balanced
2 x XLR balanced
(direct or 80Hz high pass)
2nd order low pass,
50Hz - 150Hz, -6dB
After approximately 12 mins.
in absence of input signal
Outputs
Input filter
Auto mute
Driver type
200mm (8”)
250mm (10”)
Enclosure type
Enclosure volume
Additional features
Closed box
12.5 litre / 0.45cu.ft
Phase control
Closed box
16.75 litre / 0.6cu.ft
Phase control
Crossover defeat switch for
LFE operation
Crossover defeat switch for
LFE operation
Soft limiting to avoid overload
LF extension control
Soft limiting to avoid overload
LF extension control
Enclosure (HxWxD)
- including feet
292 x 280 x 255mm
111/2 x 111/2 x 10”
7.0kg / 15.4 lbs
323 x 286 x 286mm
121/16 x 115/16 x 115/16”
9.5kg / 21 lbs
Enclosure weight
Mains voltage
120V nominal AC~60Hz
120V nominal AC~60Hz
230V nominal AC~50Hz
120V - T2AL / 250V
230V - T1AL / 250V
230V nominal AC~50Hz
120V - T3. 15AL / 250V
230V - T1.6AL / 250V
Mains fuse
Maximum power
consumption
275VA
416VA
TS8, TS10 & TS12 Professional Active Subwoofers
Three powerful active subwoofers have been designed to complement the Reveal range of studio
monitors for 2.1, 5.1, 7.2 configurations or in any other multi channel combination required. All are
substantially constructed closed box cabinets with high power handling and long throw drive units
delivering tightly controlled bass with massive impact; ensuring that the punch and drive of the mix track
is faithfully reproduced.
Download from Www.Somanuals.com. All Manuals Search And Download.
Reveal
66
Reveal 66
Passive centre channel
Frequency response (1)
Recommended Amplifier Power
Power Handling Average RMS
Normal Impedance
Sensitivity (3)
Distortion
60Hz-51kHZ
80 to 150W @ 8W
80W
reference monitor
Optimised bass-reflex loaded
cabinet with 40mm thick front
baffle
6
92dB for 1W at 1m
<0.6%
2.7kHz
90 degrees
Two shielded 165mm (61/2”)
woofers, multi fibre paper pulp
cones
Crossover Frequency
Dispersion (@-6dB)
Shielded 25mm (1”) titanium
dome neodymium tweeter
WideBand™ HF extended to
51kHz corrects phase response
DRIVE UNITS
Drive Units - LF/MID
2 x 165mm (61/2”) multi fibre
paper pulp cone
25mm (1”) titanium dome
neodymium magnet system
Whether you’re mixing for film, video
or 5.1 audio formats, a dedicated
centre-channel is a must.
WideBand™ HF
Cabinet
The Reveal 66 is designed to fit into
your production environment with
minimal visual obstruction while
delivering the kind of performance
demanded of a centre-channel
speaker.
Type
Construction
Optimised bass-reflex loaded
MDF cabinet and front baffle.
Tongue and groove front and back
Grey cabinet
Finish
Maroon painted baffle
Wide dynamic range, equal capability
with vocal and music tracks and
more than enough acoustic output
make the Reveal 66 the perfect
centre channel in any Reveal
system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Reveal
6
Frequency response (1)
Recommended Amplifier Power
Power Handling Average RMS
Normal Impedance
63Hz-51kHZ
50 to 100W @ 8W
50W
6
Sensitivity (3)
Distortion
90dB for 1W at 1m
<0.6%
Crossover Frequency
Dispersion (@-6dB)
2.9kHz
90 degrees
DRIVE UNITS
Drive Units - LF/MID
165mm (61/2”) multi fibre
paper pulp cone
WideBand™ HF
25mm (1”) titanium dome
neodymium magnet system
Cabinet
Type
Construction
Optimised bass-reflex loaded
MDF cabinet and front baffle.
Tongue and groove front and back
Grey cabinet
Finish
Maroon painted baffle
Reveal 6
Passive nearfield reference monitor
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Shielded 165mm (61/2”) woofer, multi fibre paper pulp cone
Shielded 25mm (1”) titanium dome neodymium tweeter
WideBand™ HF extended to 51kHz corrects phase response
The Reveal 6 combines all the heritage and purity of the original Reveal series
with the very latest in technology. The result is a no-nonsense nearfield
reference monitor with deep, punchy bass, clean and open mid-range
and unrivalled vocal intelligibility. Combine the Reveal 6 with your
preferred power amplifier and hear just how good a passive reference
monitor can sound.
Download from Www.Somanuals.com. All Manuals Search And Download.
Just because a speaker sounds great in one room doesn’t mean it will sound great in your studio.
Room acoustics, speaker placement and monitoring distance play a great role in the way a speaker
sounds. Until now there wasn’t much you could do about that without spending more money on
expensive equalisers and a professional acoustician to place the speakers and tune them to the room.
Tannoy’s exclusive Activ-Assist™ technology ensures that the great-sounding monitors we build will
sound great where it matters; right there in your studio! It all starts with Activ-Assist™ software running
on a PC/MAC with a sound card. The program automates the acoustic measurement process and
allows you to measure the speakers in the room like a pro.
Once the measurement is made the software calculates the right settings from over 2,000 potential
choices. Tuning the speaker is as simple as setting the switches on the rear panel to match the graphic
on the computer screen. In seconds your Reveal D monitors have been tuned and optimised for the
room with the same degree of precision that is used in some of the world’s best recording studios.
measurement microphone. A calibrated Tannoy measurement microphone is also available as an
accessory from your local Tannoy dealer.
Automated speaker measurement system for Reveal D studio monitors
Recommends speaker EQ settings from 2,000 options
Performs dual-channel FFT measurements of great precision
Fool-proof on screen wizard-driven design
Free software works with all Reveal D-series models
Download from Www.Somanuals.com. All Manuals Search And Download.
XLR / 1/2”
jack combination
connector for
10 Activ-Assist™
DIP switches control
LF alignment -
mid/near/close field
& half/quarter/eighth
space compensation
balanced input
Digital input
on / off
10 Activ-Assist™
DIP switches
control mid band
and HF shelving trim
3-way switch
(post 2 channel DAC)
selects SPDIF stream
channel to be decoded
- Left/Right/Mono
Switch selection of
12dB/8ve 80Hz high
pass filter for use with
AV subwoofers
DIP switch ‘flat’
setting shown on
the back
panel artwork
SPEC NOTES :
(1) +/- 3 dB, measured at 1m in an anechoic chamber.
(2) Peak SPL at mix position for 1 pair driven
(3) Average over specified bandwidth for half space environment
Applications:
Home studios/composition
Project studios, users of PC/MAC
DAW’s
Professionrecording, broadcast
post produon studios & editing sutes
Download from Www.Somanuals.com. All Manuals Search And Download.
PERFORMANCE
66D
Reveal 66D
Active centre channel reference
Frequency response (1)
Max SPL (2)
Distortion
49Hz-51kHZ
117dB
<0.4%
monitor with Active-Assist™
Optimised bass-reflex loaded
cabinet with 40mm thick front
baffle
Dispersion @-6dB, 10kHz, horizontal
90 degrees
Two shielded 165mm (61/2”)
woofers, multi fibre paper
pulp cones
DRIVE UNITS
Drive Units – LF/MID
2 x 165mm (61/2”) multi fibre
paper pulp cone
25mm (1”) titanium dome,
neodymium magnet system.
Shielded 25mm (1”) titanium
dome neodymium tweeter
WideBandTM HF extended to
51kHz corrects phase response
Active bi-amplification
(100W LF / 50W HF)
WideBandTM HF
ELECTRONIC SYSTEM
Inputs
600 balanced XLR/Jack,
SPDIF RCA
SPDIF sampling rate
Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu
for a max SPL of 117dB
Amplifier output power
Outputs
44.1 – 96kHz
Putting together an active surround
system? Look no further than the
Reveal 66D as the ideal centre
channel monitor.
100W LF / 50W HF
SPDIF slave out RCA
User Controls
Front panel mounted
on/standby/mute switch,
multi-function LED,
With its extended WideBand™
response, the R66D preserves the
harmonic structure of recorded music
and vocals; this results in a more
natural and accurate reproduction
of the original source. Ready to
integrate with your analogue or digital
production environment the R66D
includes Tannoy’s Activ-Assist™
equalisation technology.
Rear panel mounted trim +6/-12dB,
80Hz high pass switch for AV use,
16-way Activ-AssistTM switch array
Download from Www.Somanuals.com. All Manuals Search And Download.
PERFORMANCE
8D
Frequency response (1)
Max SPL (2)
46Hz-51kHz
118dB
Distortion
<0.4%
Dispersion @-6dB, 10kHz, horizontal
90 degrees
DRIVE UNITS
Drive Units – LF/MID
200mm (8”) multi fibre
paper pulp cone
25mm (1”) titanium dome,
neodymium magnet system.
WideBandTM HF
ELECTRONIC SYSTEM
Inputs
600 balanced XLR/Jack,
SPDIF RCA
SPDIF sampling rate
44.1 – 96kHz
Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu
for a max SPL of 118dB
Amplifier output power
Outputs
120W LF / 60W HF
SPDIF slave out RCA
User Controls
Front panel mounted
on/standby/mute switch,
multi-function LED,
Rear panel mounted trim +6/-12dB,
80Hz high pass switch for AV use,
16-way Activ-AssistTM switch array
Reveal 8D
High power active near field reference monitor with Activ-Assist™
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Shielded 200mm (8”) multi fibre paper pulp cone woofer
Shielded 25mm (1”) titanium dome neodymium tweeter
WideBandTM HF extended to 51kHz corrects phase response
Active bi-amplification (120W LF / 60W HF)
Tannoy Activ-Assist™ set-up software enabled
Get the big, deep low-frequency performance of an 200mm (8”) woofer with
the same purity and articulation of the rest of the Reveal range with the
R8D. Combining 180 Watts of bi-amplification, with Activ-Assist™
equalisation technology and an SPDIF digital input, the R8D is ready
for the most demanding applications. Classic Reveal performance
with extended LF response and up to 118dB of power output
makes the R8D hnew sndard for world-cls nearfid
monitoring applation.
Download from Www.Somanuals.com. All Manuals Search And Download.
PERFORMANCE
6D
Frequency response (1)
Max SPL (2)
60Hz-51kHZ
115dB
Distortion
<0.5%
Dispersion @-6dB, 10kHz, horizontal
90 degrees
DRIVE UNITS
Drive Units – LF/MID
165mm (61/2”) multi fibre
paper pulp cone
25mm (1”) titanium dome,
neodymium magnet system.
WideBandTM HF
ELECTRONIC SYSTEM
Inputs
600 balanced XLR/1/4” jack
Frequency response (1) 60Hz-51kHZ
combination, SPDIF RCA
Max SPL(2)
115dB
SPDIF sampling rate
44.1 – 96kHz
< 0.5%
Distortion
Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu
Dispersion (@-6dB)
Drive Units- LF/MID
Amplifier output power
90 degrees
for a max SPL of 115dB
165mm (6”) multi fibre
75W LF / 35W HF
paper pulp cone
WideBandTM HF
Outputs
25mm (1”) titanium
SPDIF slave out RCA
User Controls
Front panel mounted
dome neodymium
on/standby/mute switch, multi-function LED,
magnet system
Rear panel mounted trim +6/-12dB,
Shielded
Electronic System
Inputs
Yes
80Hz high pass switch for AV use,
16-way Activ-AssistTM switch array
600Ω balanced
XLR/Jack
Reveal 6D
SPDIF RCA
Active near field reference monitor with Activ-Assist™
SPDIF Sample Rate
44.1 – 96kHz
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Sensitivity
775mV for 100W
Shielded 165mm (61/2”) woofer, multi fibre paper pulp cone
Shielded 25mm (1”) titanium dome neodymium tweeter
WideBandTM HF extended to 51kHz corrects phase response
Features:
A40cmtivme bthi-iackmcpolinfictoautiroend(b7a5fWfleLF / 35W HF)
Driver lossy-coupled to cabinet
A whole generation of artists and producers have built their award-winning recordings
10 screw driver chassis fixing
on the original Reveal active; now the Reveal 6D takes nearfield monitoring to
Flux control rings on LF drivers
a new level. Incorporating Tannoy’s exclusive Activ-Assist™ technology allows
you to tune the monitor to the room’s acoustics for an unparalleled sonic
integration. Go ahead and connect it directly to the SPDIF output from
Applications:
your DAW, or stay in the analogue
Home studios/composition
Project studios, users of PC/MAC
DAW’s
Professional cording, broadcast,
post productistudios & editing suites
Download from Www.Somanuals.com. All Manuals Search And Download.
PERFORMANCE
5A
Frequency response (1)
Max SPL (2)
70Hz-30kHZ
109dB
Distortion
<0.7%
Dispersion @-6dB, 10kHz, horizontal
90 degrees
DRIVE UNITS
Drive Units – LF/MID
130mm (5”) multi fibre
paper pulp cone
25mm (1”) soft dome,
WideBandTM HF
neodymium magnet system.
ELECTRONIC SYSTEM
Inputs
600 balanced XLR/1/4”
jack combination
Sensitivity
775mV for 40W
Amplifier output power
User controls
40W LF / 20W HF
Front panel mounted
on/standby/mute switch, multi-function LED,
gain control
Cabinet dimensions
(HxWxD exc. heatsink)
298.8 x 271.5 x 184mm
113/4 x 103/4 x 71/4”
Reveal 5A
Active compact reference monitor
Ultra high bandwidth response out to 30kHz
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Shielded 130mm (5”) woofer, multi fibre paper pulp cone
Shielded 25mm (1”) soft dome neodymium tweeter
Features:
40mm thick contoured baffle
Whether you’re building a studio on a budget, or you just need an active monitor
Driver lossy-coupled to cabinet
with a small footprint, the Reveal 5A is your choice. Built to the same high standard
10 screw driver chassis fixing
as the rest of the Reveal line, the R5A packs performance, accuracy and value
Flux control rings on LF drivers
into a compact enclosure that’s ready to share the desktop with the rest of
your gear. Priced right for the beginner, the R5A delivers WideBand™
performance that will impress even the most seasoned pro.
Applications:
Home studios/composition
Project studios, users of PC/MAC
AW’s
Profssional recording, oadcast,
post oduction studios & editing suites
Download from Www.Somanuals.com. All Manuals Search And Download.
The Antidote to Compromise
Few if any manufacturers have the reputation and track record of Tannoy in the professional
studio monitor market. Right from the emergence of the studio monitor itself as a product
in the early 1940’s through the British invasion of the ‘60’s and every genre of music since
then, Tannoy has been helping track, mix and master the hits.
You don’t dominate a segment for over 60 years by cutting corners.
You do it by staying true to your values; and letting others chase the latest fad or cheapest
option. Considering the crucial role that monitors play in the production of audio
programming we believe that this is one place in your signal chain where compromise
is simply unacceptable.
See and hear the Tannoy Reveal range at an authorized dealer near you and see for
yourself why Reveal is truly the antidote to compromise.
Tannoy North America
Tannoy Deutschland
T: (519) 745 1158
T: (04102) 888 393
F: (519) 745 2364
F: (04102) 888 959
Download from Www.Somanuals.com. All Manuals Search And Download.
|