/
BF-555 BF-556
Scale plus BodyFat Monitor
Balance impédancemètre
Monitor de Grasa Corporal/Báscula (Pesa)
Instruction Manual
Read this Instruction Manual carefully and keep it for future reference.
Manuel d’instructions
Lisez ce manuel d’instructions attentivement et gardez-le à portée de la main pour référence future.
Manual de Instrucciones
Lea cuidadosamente este Manual de Instrucciones, y guárdelo para consultarlo en el futuro.
Download from Www.Somanuals.com. All Manuals Search And Download.
English: Instruction Manual
INTRODUCTION
Thank you for selecting a Tanita Scale plus Body Fat Monitor. This family model uses the BIA
(Bioelectrical Impedance Analysis) technique, a state-of-the-art technology for body fat assessment.
Note: Read this Instruction Manual carefully and
keep it handy for future reference.
Guide to Using this Manual:
Owners of the BF-556 should watch for highlighted text. These items of text describe the additional
features of your scale. Owners of the BF-555 should disregard the highlighted text.
Safety Precautions
• Persons with implanted medical equipment, such as a pacemaker, should not use the
Body Fat Monitor feature on this Tanita Scale plus Body Fat Monitor. This Scale plus
Body Fat Monitor passes a low-level electrical signal through the body, which may
interfere with the operation of a pacemaker.
• The Tanita Scale plus Body Fat Monitors are intended for home use only. This unit is not
intended for professional use in hospitals or other medical facilities; it is not equipped with the
quality standards required for heavy usage experienced under professional conditions.
Note: Body fat percentage estimates will vary with
the amount of moisture in the body, and can be
affected by dehydration or overhydration due to
such factors as alcohol consumption,
• Do not use this unit on slippery surfaces such as wet floors.
• Disabled people should be assisted by someone else, or use a handrail when using
menstruation, illness, intense exercise, etc.
Tanita Scale plus Body Fat Monitors.
Important Notes for Users
BF-555: is intended for use by adults and children with inactive to
moderately active lifestyles. It is not suitable for athletic body types.
BF-556: is intended for adults and children with inactive to moderately
active lifestyles and adults with athletic body types.
Tanita defines “athlete” as a person involved in intense physical activity of approximately
10 hours per week and who has a resting heart rate of approximately 60 beats per minute
or less. Tanita’s athlete definition includes “lifetime of fitness” individuals who have
been fit for years but currently exercise less than 10 hours per week.
Tanita’s athlete definition does not include “enthusiastic beginners” who are making a real
commitment to exercising at least 10 hours per week but whose bodies have not yet changed to
require the Athlete mode.
Note: Recommendations for exercise programs or
diets based on calculated data should be
determined by a doctor or licensed medical
professional. Do not attempt to evaluate the data by
yourself.
Body fat percentage estimates may be slightly lower or higher for the following categories
of people:
• Adults seventy years old or older
Recorded data may be lost if the unit is used
incorrectly or is exposed to electrical power surges.
Tanita takes no responsibility for any kind of loss
caused by the loss of recorded data.
• Persons suffering from edema
Body fat percentage estimates for these persons should not be treated as absolute values, but may be
used as relative values for checking body fat percent variations over a period of time.
The body fat monitor function is not intended for pregnant women, professional athletes
or bodybuilders.
Tanita takes no responsibility for any kind of
damage or loss caused by these units, or any kind
of claim made by a third person.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
BF-555/556 Scale plus Body Fat Monitor
PRINCIPLES OF ESTIMATING BODY FAT %
Tanita Scale plus Body Fat Monitors allow you to measure your body fat percentage at home as easily
as you measure your weight.
What is Body Fat Percentage?
Body fat percentage is the percentage of fat in your body. Until now, your absolute weight has
determined whether or not you were considered overweight or obese. In recent years, the definition
of obesity has been refined to mean the presence of excess body fat. Obesity has been linked to
conditions such as high blood pressure, heart disease, diabetes, cancer, and other disabling conditions.
1, 2
Body Fat Ranges for Standard Adults
Underfat
Healthy
Overfat
Obese
1 Based on NIH/WHO BMI Guidelines.
Female 20–39
Age 40–59
60–79
2 As reported by Gallagher, et al,
at NY Obesity Research Center.
To determine the percentage of body fat
that is appropriate for your body,
consult your physician.
0%
10%
20%
30%
40%
Male 20–39
Age 40–59
60–79
Underfat
Healthy
Overfat
Obese
The BIA Method
Tanita Scale plus Body Fat Monitors use the BIA (Bioelectrical Impedance Analysis) technique. In this
method, a safe low-level electrical signal is passed through the body. It is difficult for the signal to flow
through fat in the human body, but easy to flow through moisture in the muscle and other body
tissues. The difficulty with which a signal flows through a substance is called impedance. So the
amount of fat in the body can be accurately estimated by measuring the impedance. The signal used is
very low, making it safe and imperceptible.
Tanita’s patented “foot-pad”
design sends a safe,
low-level electrical signal
through the body to determine
its composition.
The illustration on the left shows how the signal travels through the body.
Body Fat Percentage Fluctuations in a Day
Hydration levels in the body may affect body fat readings. Readings are usually highest in the early
waking hours, since the body tends to be dehydrated after a long night’s sleep. For the most accurate
reading, a person should take a body fat percentage reading at a consistent time of day under
consistent conditions.
Besides this basic cycle of fluctuations in the daily body fat readings, variations may be caused by
hydration changes in the body due to eating, drinking, menstruation, illness, exercising, and bathing.
Daily body fat readings are unique to each person, and depend upon one’s lifestyle, job and activities.
Advantages of Tanita Scale plus Body Fat Monitors
Previously, body fat percentage was determined by measuring the thickness of subcutaneous fat by
pinching it with calipers, or by laying a person on a scanning bed and passing a current from hand to
foot. However, these methods had problems—professional skills are required, the procedures take
time and are often invasive, and measurement values vary. Currently, the gold standard methods of fat
percentage measurement are the underwater weighing method and DEXA (dual energy x-ray
absorptiometry).
Tanita’s BIA method uses equations derived from large, multi-ethnic population studies to predict body
composition. Readings taken with Tanita Scale plus Body Fat Monitors correlate highly with both DEXA
(Tanita’s reference model) and Hydrodensitometry.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT DESCRIPTION
1.
Measuring Platform
1. Display Screen
2. Set Button
2.
3. Up/Down (Select) Buttons
4. Ball-of-Foot Electrodes
5. Heel Electrodes
3.
6. Personal Keys
4.
5.
7. Weight-Only Key
Use for weight measurement only.
6.
7.
6.
Accessories
8.
9.
8. AA-Size Batteries (4)
9. Support Feet (4)
Only needed if unit is placed on carpet.
Do not use these feet on hard flooring.
Athlete (556 only)
Height
Male
Female
BF-556
Daily Calorie Intake
Body Fat Range
Indicator Bars
Body Fat Range Indicators
Guest Mode/Down
Indicator Button
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BF-555/556 Scale plus Body Fat Monitor
PREPARATIONS BEFORE USE
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied
AA-batteries as indicated.
Open as shown.
Note: Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly positioned the
fluid may leak and damage floors. If you do not intend to use this unit for a long period of time, it is
advisable to remove the batteries before storage.
Direction of the batteries.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure safe
and accurate measurement.
Note: To avoid possible injury, do not step on the edge of the platform.
Attaching the Support Feet (Carpet Use Only)
Insert the support feet into the holes at the four corners on the bottom of the measuring platform.
Note: Do not use the monitor on any carpeting that is more than 0.8" (20 mm) in thickness, and do not use
the support feet on hard, uncarpeted surfaces, as the unit may tip over.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology. To keep the unit in the best
condition, follow these instructions carefully:
• Do not attempt to disassemble the measuring platform.
• Store the unit horizontally, and place it so that the Personal Keys will not be
pressed accidentally.
• Avoid excessive impact or vibration to the unit.
• Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme
temperature change.
• Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a
cloth first) to keep them shiny; avoid soaps.
If you need assistance, please call our toll-free customer service number at 1-800-TANITA-8 (United States
and Canada only) or visit www.tanita.com.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT FEATURES
• Tanita Scale plus Body Fat Monitors allow you to measure both weight and body fat percentage
simultaneously and easily, simply by stepping on the unit.
• Your Scale plus Body Fat Monitor is calibrated for Adults or Children (age 7–17), Male or Female.
• In addition, the BF-556 is calibrated for Adult Athlete mode.
• Personal data (Age, Female/Male, Height, Activity Level, etc.) can be preset and stored in
memory for up to four people.
• Unique Healthy Range Indicator Bar automatically displays where your body fat percentage falls
within the Body Fat Ranges chart (p.2).
• Daily Calorie Intake (DCI) feature displays an estimate of how many calories you can consume
within the next 24 hours to maintain your current weight.
• Guest feature allows you to take readings without reprogramming one of the Personal Keys.
• Weight-Only Key provides quick weight readings.
• The unit emits a helpful “beep” when activated, and also at various stages in the programming
and measuring processes. Listen for these sounds which will prompt you to step on the unit,
look at your readings, or confirm a setting.
Automatic Shut-Down Function
The automatic shut-down function shuts off the power automatically in the following cases:
• If you interrupt the measurement process. The power will shut down automatically
within 10 to 20 seconds, depending upon the type of operation.
• If an extraordinary weight is applied to the platform.
• If you make a mistake during measurement or a key or button operation.
• During programming, if you do not touch any of the keys or buttons within 60 seconds.
• After you have completed the measuring process.
Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Data in Memory” (p.6)
SWITCHING THE WEIGHT MODE (lb kg st-lb)
Your Scale plus Body Fat Monitor can measure weight in three different modes: lb (pounds),
kg (kilograms), or st-lb (British stone-pounds). The default setting (the setting at which Tanita products
are shipped) is lb. If you would like to change that setting, or if at any point another setting has been
inadvertently entered, follow these steps:
Press the Set and Up buttons simultaneously. Release the buttons, the display will flash. Press the Up
button to cycle through each weight mode until just the mode that you require is displayed. Then press
the Set button. The unit will beep twice in short succession, and the display screen will flash to confirm
your selection and store it in memory.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically
set to feet and inches. Similarly, if kilograms is selected, height will be automatically set to centimeters.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BF-555/556 Scale plus Body Fat Monitor
SETTING AND STORING DATA IN MEMORY
The body fat monitoring function can be operated only if data has been preprogrammed into the unit.
1. Turn on the Power
Press the Set button to turn on the unit (once programmed, tapping a Personal Key turns on the unit).
The unit will beep to confirm activation, the Personal Key numbers (1, 2, 3, 4) will be displayed, arrow
icon will appear in the upper right corner, and the display will flash.
Note:
will appear in the upper right hand
corner indicating when the Up/Down buttons
should be used during programming.
Note: If you don’t operate the unit for sixty seconds after the unit has been turned on, the unit will turn off
automatically.
2. Select a Personal Key
Press the Up button to select a Personal Key (pressing once will activate key number 1, pressing twice
will activate key number 2, etc.). Once you reach the Personal Key number you wish to use, press the Set
button. (During programming, the unit will beep once each time you press the Set button.)
3. Set Age
The display defaults to Age 30 (range of user age is between 7–99). An arrow icon appears in the upper
left corner to indicate Age setting. Use the Up/Down buttons to scroll through numbers. When you reach
your age, press the Set button. The unit will beep once to confirm.
4. Select Female or Male
Use the Up/Down buttons to select Female ( ) or Male ( ), then press the Set button.
The unit will beep once to confirm.
BF-556 Select Athlete Mode
Use the Up/Down buttons to scroll through Female ( ) or Male ( ), Female Athlete or Male Athlete. As
you scroll, arrows will point to the gender icons first and then to the both the gender icon and the athlete
icon ( ) simultaneously. When you reach the user mode that best suits you, press the Set button. (See
p.1 for Tanita’s definition of “athlete.”)
5. Specify the Height
The display defaults to 5' 7.0" (170 cm) (range of user is from 3' 4.0"–7' 3.0" or 100 cm–220 cm). Use
the Up/Down buttons to specify Height and then press the Set button. The unit will beep once to confirm.
Note: Height is set in feet and inches if Weight Mode is set to lb or st-lb, or in centimeters if weight is set to kg.
Note: Height is set in increments of 0.5" (or 1 cm).
6. Select Activity Level
To use the DCI (Daily Calorie Intake) feature properly, you need to set the Activity Level.
Use the Up button to specify Activity Level. Press the Set button to confirm.
Level 1 = Inactive lifestyles (little or no exercise)
Level 2 = Moderately active lifestyles (occasional, low intensity exercise)
Level 3 = Active lifestyles (exercises regularly)
Note: As you enter data, or while the display
flashes the personal settings, check for mistakes,
such as an incorrect height setting, etc. If you find
that you have made a mistake, tap the Weight-Only
Key while the display is flashing. The unit will
automatically shut off and cancel any data that you
entered at that time.
Level 4 = Adult involved in intense physical activity (see p.1 for Tanita’s definition of Athlete)
BF-556: If the Personal Key is set in Athlete Mode, it will automatically set the Activity Level to Level 4.
The unit will beep twice and the display will flash all data (Age, Female/Male, Height, Activity Level, etc.)
three times to confirm the programming. The power will then shut down automatically.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TAKING WEIGHT AND BODY FAT READINGS
After programming your personal data you are ready to take a reading.
Select Personal Key and Step On
Using your toe, tap your preprogrammed Personal Key. (Release the key within 3 seconds or the
display will show “Err”.) The unit will beep and the display will show the programmed data. The unit
will beep again and the display will show “0.0”. Now step onto the platform.
Note: If you step onto the platform before “0.0” appears, you will not obtain a reading. Furthermore, if you do
not step onto the measuring platform within about 60 seconds after “0.0” appears, the power is shut-off
automatically.
Get Your Readings
Your weight will be shown first. Continue to stand erect on the platform. "54321" will appear on the
display and disappear one by one. Your body fat percentage and Body Fat Range will appear on the
display screen. The display will then flash your weight, body fat percentage, and DCI alternately five times.
Note: Even if you step off the platform after all the
results are displayed, the alternating display of body
weight, body fat percentage, and DCI will be repeated
five times. The unit will then shut down automatically.
Calculating body
fat percentage
Step on platform
Body fat range
animation
Weight and body
fat percentage
Body fat range
indicatior bar
Daily Calorie
Intake reading
Weight reading
Getting Accurate Readings
To get the most accurate, absolute values, readings should be taken without clothing and under
consistent conditions of hydration. If you do not undress, always remove your socks or stockings,
and be sure the soles of your feet are clean before stepping on the measuring platform. Stand erect
on the platform.
Be sure that your heels are correctly aligned with the electrodes on the measuring platform. Don’t
worry if your feet appear too large for the unit—accurate readings can still be obtained if your toes
overhang the platform.
Heels centered
on electrodes
Toes may overhang
measuring platform
It is best to take readings at the same time of day. Try to wait about three hours after rising, eating, or
hard exercise before taking measurements. While readings taken under other conditions may not have
the same absolute values, they are accurate for determining the percentage of change as long as the
readings are taken in a consistent manner. To monitor progress, compare weight and body fat
percentage taken under the same conditions over a period of time.
Note: An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent
or you are in a sitting position.
UNDERSTANDING YOUR READINGS
Healthy Range Indicator Bar (Standard Adults Only)
Your Scale plus Body Fat Monitor automatically compares your body fat reading to the Healthy Body
Fat Range chart.
Note: If you select Athlete mode on the BF-556,
the unit will not display the Healthy Range Indicator
Bar. The Healthy Body Fat Ranges are based on
Standard (sedentary to moderately active) Adults
and therefore do not apply to athletic adults.
Following your body fat percentage reading, four black squares will appear along the bottom of the
display indentifying where you fall within the Body Fat Ranges for your age and gender, as well as
telling you where in that range your percentage falls (i.e. low, middle or high end). For example, if you
are a female, age 20–39 and your reading is 22.5%, the squares will appear above the “0” or Healthy
Range area, and the square second from the left end (or middle) will appear highlighted. For more
about the Healthy Range, see p.2.
Note: Athletes may have a lower body fat range
based on their particular sport or activity.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BF-555/556 Scale plus Body Fat Monitor
– Underfat; below the healthy body fat range. Increased risk for health problems.
Healthy; within the healthy body fat percentage range for your age/gender.
0
+ Overfat; above the healthy range. Increased risk for obesity-related health problems.
++ Obese; high above the healthy body fat range. Greatly increased risk of obesity-related
Under
Healthy
Over
Obese
health problems.
BF-555: Only Adults 18 and over will receive a Healthy Range Indication. Because of the dynamic
physiological changes occurring throughout childhood, a Healthy Range for children has
not been established. Please consult your pediatrician for health advice regarding your child.
Daily Calorie Intake (DCI)
Having pre-programmed your personal information, your Scale plus Body Fat Monitor can estimate how
many calories you can consume within the next 24 hours to maintain your current weight and body fat
percentage. Therefore, if you would like to lose weight, consume less calories than the amount shown.
ADDITIONAL PROGRAMMING FEATURES
Programming the Guest Mode
The Guest mode allows you to use the unit without losing the information already assigned to a
Personal Key.
To program the Guest mode, use the G (Down) button to turn on the power. Then follow steps 3 through
6 in “Setting and Storing Data in Memory” (p.6). The unit will beep twice and the display will show
“0.0”. Step onto the platform. Next follow the directions for “Get Your Readings” (p.7).
Note: If you step onto the platform before “0.0” appears the display will show “Err” and you will not obtain a reading.
Reprogramming a Personal Key
From time to time, you may need to adjust the data stored in a Personal Key, for example, your age or
height (or for the BF-556, to change between Athlete and Standard Adult Modes).
To add a new user and erase the data of a previous user, or to change already stored data repeat Steps 1
though 6 of “Setting and Storing Data in Memory” (p.6). The display will then flash all the new data to
confirm programming and the unit will shut off automatically.
Taking Weight Measurement Only
Select Weight-Only Key
Using your toe, tap the Weight-only key, “88888” will appear. After 2 or 3 seconds, “0.0” will appear in
the display. When “0.0” appears in the display, step onto the platform. The body weight value will
appear. If you remain on the platform, the display will flash for about 30 seconds, and then the power
will automatically turn off. If you step off the platform, the weight will continue to show for about 5
seconds, then “0.0” will appear and the unit will shut off automatically.
REPLACING THE BATTERIES
When the batteries run low, the “Lo” message will appear on the display window. When this message
appears, be sure to replace the batteries immediately, since weak batteries will affect the accuracy of your
measurements. Change all the batteries at the same time with new AA-size batteries. The unit comes
with trial batteries—their service life may be short.
Note: Your settings will not be erased from the memory when you remove the batteries.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the following problems occur... then...
AGE
SET
AGE
SET
“st-lb” or “kg” appears while taking a weight measurement.
The unit’s Weight Mode has been set to measure your weight in units of stone-pounds or kilograms.
Refer to the “Switching the Weight Mode” (lb, kg, or st-lb) on p.5 if you would like to change the
setting back to pounds (lb).
“Lo” appears on the display, or all data appears and
immediately disappears.
Batteries are low. Replace batteries immediately.
The display shows “
” and goes off when a Personal Key
- - - - -
is pressed.
No data (Age, Female/Male, Height, Activity Level—and BF-556 Athlete/Standard Adult) has been
stored in memory for that key. Preprogram with personal data (p.6).
The display reads “Err ” or “
shuts off while measuring.
” appears or the power
- - - - -
Be sure that you have selected the correct user mode (Age, Female/Male, Height, Activity Level—and
BF-556 Athlete/Standard Adult). Make sure socks or stockings are removed, and the soles of your feet
are clean and properly aligned with the guides on the measuring platform. Consider whether or not you
have selected the correct Personal Key and make sure that you wait for “0.0” to appear before stepping
on the platform. Step off and repeat steps on p.7.
“OL” appears while measuring.
Reading cannot be obtained if the weight capacity (300 lb/136 kg/21 st-6 lb) is exceeded.
Note: If body fat percentage is more than 75%, readings cannot be obtained from the unit.
The body fat percentage measurement does not appear after the
weight is measured.
Vibration will interfere with measurement of the fat percentage. Be sure to stand erect and still on the
measuring platform. Do not bend your knees. Be sure that shoes and socks are removed and check
foot alignment. Step off and repeat steps on p.7.
Scale underweighs.
If weight reading is significantly less than normal, carpet support feet may have been incorrectly
installed. Remove support feet and weigh on a hard, level surface. Refer to p.4 for proper installation
of support feet.
If you need assistance, please call our toll-free customer service number at 1-800-TANITA-8
(United States and Canada only) or visit www.tanita.com.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BF-555/556 Scale plus Body Fat Monitor
TANITA PRODUCTS LIMITED WARRANTY
Not Valid Without Proof of Purchase
Your Tanita product is warranted to the original consumer only, for three (3) years, to be free from defects in materials and
workmanship under normal use. This product is designed for personal use only. Tanita Corporation of America reserves
the right to nullify the warranty agreement should the product be used in a commercial environment. This warranty applies
only to products purchased from authorized Tanita dealers and is void if the product has been tampered with or mistreated,
or if the defect is related to servicing or parts not supplied by us. Our obligation under this warranty is limited solely to the
charge of repairing the product, plus the cost of parts or, at the option of Tanita, replacing the product with an equivalent
model. There are no express or implied warranties except as listed above. Tanita is not liable for incidental or
consequential damages for failure or malfunction of the product and any recovery may not be greater than
the purchase price paid for this product. Some states do not allow limitation on how long an implied warranty lasts, or
the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This
warranty gives you specific legal rights and you may also have other rights which vary from state to state. No person is
authorized to change the terms of this warranty.
If Product Is Defective or Needs Repair
Do not return this product to the place of purchase; doing so may delay the processing of your warranty claim.
Call Tanita at1-800-TANITA-8 to receive a Return Authorization Number before returning this product. Include $12.50 for
handling, return postage and insurance to the facility listed below. Proof of purchase must accompany the product.
Because of possible loss, we recommend insuring your product, return receipt requested, when using the mail. If you do not
receive a receipt within a reasonable time, start a tracer through the originating post office. It is important that you pack the
product carefully prior to shipment to prevent damage in transit and that you include a letter describing in detail the specific
condition requiring adjustment or repair.
Tanita Products Limited After Warranty
All terms and conditions apply as specified above in the original Tanita Limited Warranty except for the cost of labor and parts:
• Minimum charge for After Warranty labor is $30 per hour, plus the cost of parts.
• You will be notified by mail or telephone of the total cost to repair your product to working condition, so prepayment can
be arranged.
• Your approval is required before any repair work can be performed on your product.
Please complete the following information and retain for your records.
Model:
Date Purchased:
/
/
Purchased From:
Address:
Please send all returns to:
Tanita Corporation
2625 S. Clearbrook Drive
Arlington Heights, IL 60005 USA
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
BF-555/556
Caractéristiques
BF-555/556
Detalles Técnicos
BF-555/556
Weight Capacity
Charges admises
Capacidad de Peso
300 lb (136 kg) (21 st-6 lb)
300 lb (136 kg) (21 st-6 lb)
300 lb (136 kg) (21 st-6 lb)
Weight Increments
Gradation
Incrementos de Peso
0.2 lb (0.1 kg) (0.2 lb)
0,2 lb (0,1 kg) (0,2 lb)
0.2 lb (0.1 kg) (0.2 lb)
Body Fat Increments
Précision du pourcentage de graisse
Incrementos de Grasa Corporal
0.1%
0,1 %
0.1%
Power Supply
Alimentation
Suministro de Energía
4 AA batteries (included)
4 piles AA, incluses
4 baterías de tamaño – que se incluyen
Power Consumption
Consommation d’énergie
Consumo de Energía
60 mA maximum
60 mA au maximum
60 mA máximo
Measuring Current
Courant émis
Corriente Medidora
50 kHz 500 µA
50 kHz 500 µA
50 kHz 500 µA
UPC No
UPC No
UPC No
BF-555-LG (Light Gray) 742496–855503
BF-556-G (Gray) 742496-855602
BF-555-LG (Light Gray) 742496–855503
BF-556-G (Gray) 742496-855602
BF-555-LG (Light Gray) 742496–855503
BF-556-G (Gray) 742496-855602
After sales service
Service après-vente
Servicios de posventa
Please contact the store where you bought this
monitor for any inquiry regarding operation
or trouble, request for repair and/or placement
of an order for parts or products. Or call
1-800-TANITA-8 (USA and Canada only).
Veuillez communiquer avec le magasin où vous
avez acheté votre balance si vous souhaitez
obtenir des renseignements sur son
fonctionnement ou sur la façon de résoudre
certains ennuis, ou encore pour obtenir des
réparations ou commander des pièces ou des
produits. Ou composez le 1-800-TANITA-8
(États-Unis et Canada seulement).
Póngase en contacto con el almacén en el cual
usted compró este monitor, en relación con
cualquier pregunta sobre la operación o problema,
solicitud de reparación y/o para hacer un pedido
de piezas o productos. O llame al teléfono 1-800-
826-4828 (sólo si usted llama desde EE. UU. o
Canadá).
©2001 Tanita Corporation 6/01 HDI
Tanita Corporation of Japan
14-2, 1-Chome, Maeno-Cho
Itabashi-Ku, Tokyo, Japan, 174-8630
Tel: 03-3968-2123
Tanita Corporation of America Inc.
2625 South Clearbrook Drive
Arlington Heights, IL 60005, USA
Tel: 847-640-9241 Fax: 847-640-9261
Toll Free: 1-800-TANITA-8
www.tanita.com
Fax: 03-3967-3766
ISO 9001 Certified
e-mail: 4health@tanita.com
Tanita France S.A.
Villa Labrouste
68 Boulevard Bourdon
92200 Neuilly-Sur-Seine, France
Tel: 01 55 24 99 99 Fax: 01 55 24 98 68
Tanita Health Equipment H.K. Ltd.
Unit 301-303 3/F Wing On Plaza
62 Mody Road, Tsimshatsui East
Kowloon, Hong Kong
Tanita Europe GmbH
Dresdener Strasse 25
D-71065 Sindelfingen, Germany
Tel: 07031-6189-6
Tanita UK Ltd.
The Barn, Philpots Close, Yiewsley,
West Drayton, Middlesex, UB7 7RY, UK
Tel: 01895-438577
Tel: 852-2838-7111 Fax: 852-2838-8667
Fax: 07031-6189-71
Fax: 01895-438511
Download from Www.Somanuals.com. All Manuals Search And Download.
|