Owner’s Manual
Recording function
• This unit can record only on the DVR.
• The DVR with 80 GB hard disc allows you to record up to 34 hours.
DVR (HDD) with DVD Player
CSHP80G
REC/OTR
PAUSE
STOP
PLAY
OPEN/CLOSE
DVR
DVD
POWER
CHANNEL
SuppliedAccessories
•
Remote control (NB310UD) with • RF cable
twoAA batteries (WPZ090
•
Audio /Video cables
(WPZ0102TM015)
• Owner’s Manual
VMN2270
1TM002)
(
1
1)
Owner’s Manual
Please use RF cable andAudio /Video cables to connect toTV.
*
Please read before using this equipment.
If you need additional operating assistance after reading this owner’s
manual or to order replacement accessories, please call
TOLL FREE:1-800-605-8453
Before you use this unit , you need to complete connections. Refer to
‘Connections’ on pages 16–18.
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Precautions (Cont’d)
IMPORTANT SAFEGUARDS
1. Read Instructions -All the safety and operating
instructions should be read before the appliance is
operated.
2. Retain Instructions-The safety and operating instructions
should be retained for future reference.
Code, ANSI / NFPA No.70, provides information with
regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.(Fig.A)
3. HeedWarnings -All warnings on the appliance and in the
operating instructions should be adhered to.
FIGURE A
4. Follow Instructions -All operating and use instructions
should be followed.
5. Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
ANTENNA
LEAD
WIRE
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
GROUND
CLAMP
ANTENNA
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user
for cleaning or any other purpose, may exclude the
reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as they may
cause hazards.
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. Lightning - For added protection for this product during
a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and
power-line surges.
7. Water and Moisture- Do not use this product near water,
for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming
pool, and the like.
8. Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only with a cart, stand,
tripod, bracket,or table recommended by the
manufacturer,or sold with the product. Any mounting of
the appliance should follow the
15. Power Lines -An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
manufacturer's instructions and should
use a mounting accessory
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
recommended by the manufacturer.
17. Object and Liquid Entry - Never push objects of any kind
into this product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the product.
18. Servicing - Do not attempt to service this product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19. Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating, and
these openings must not be blocked or covered. The
openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have been
adhered to.
10. Power Sources -This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from
battery power,or other sources, refer to the operating
instructions.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the product to its normal operation.
11. Grounding or Polarization -This product is equipped with
a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit,
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance this indicates a need for service.
20. Replacement Parts -When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
21. Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform
safety checks to determine that the product is in proper
operating condition.
contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the
appliance.
22. Heat -This product should be situated away from heat
sources such as radiators, heat registers,stoves,or other
products (including amplifiers) that produce heat.
13. OutdoorAntenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up
EN
3
static charges. Article 810 of the National Electrical
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Precautions (Cont’d)
Installation Location
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not
place the unit directly on top of theTV.
• Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the
sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it fromAC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Moisture CondensationWarning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after
heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its
inside gets dry.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by U.S.patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision,
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
Notice for progressive scan outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture.In case of picture problems with 525p progressive scan outputs,it
is recommended that the user switch the connection to the‘standard definition’ output.If there are questions
regarding yourTV set compatibility with this model 525p DVD player,please contact our customer service
center.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Table of Contents
Before you start . . . . . . . . . . . . . . . . . . . . . .2 DVR (Editing) . . . . . . . . . . . . . . . . . . . . . . .48
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Laser Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Information on Recording (DVR) . . . . . . . . . . . . . . . .8
Information on Playback . . . . . . . . . . . . . . . . . . . . . . .9
Functional overview . . . . . . . . . . . . . . . . . . . . . . . . . .10
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
On-Screen Display for DVR Mode . . . . . . . . . . . . . . . . . .14
On-Screen Display for DVD Mode . . . . . . . . . . . . . . . . .15
DeletingTitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Deleting SelectedTitles . . . . . . . . . . . . . . . . . . . . . . . . . .48
Deleting allTitles in DVR . . . . . . . . . . . . . . . . . . . . . . . . .49
Protecting / Undo ProtectingTitles . . . . . . . . . . . . .50
DVR (Other Setups) . . . . . . . . . . . . . . . . .51
Tour of the Setup Menus . . . . . . . . . . . . . . . . . . . . . .51
Playback Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
TVAspect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Audio Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Recording Setting (Auto Chapter) . . . . . . . . . . . . .54
Reset to Factory Default . . . . . . . . . . . . . . . . . . . . . .55
DVD (Disc Playback) . . . . . . . . . . . . . . . . .56
About the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Disc Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Title Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Step-by-Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Special Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Fast Forward / Fast Reverse . . . . . . . . . . . . . . . . . . . . . . .61
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . . .62
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Playing back MP3 /WMA Discs . . . . . . . . . . . . . . . . . . . .64
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Using SKIP H / G . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Using SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Using SKIP H / G . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Using SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Repeat / Random / Programmed Playback . . . . . . .69
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
RepeatA-B Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
To set subtitle ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . .73
Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
CameraAngles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Black Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Stereo Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Virtual Surround . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Connections . . . . . . . . . . . . . . . . . . . . . . . .16
Connection to aTV . . . . . . . . . . . . . . . . . . . . . . . . . .16
Connection to a Cable Box or Satellite Box . . . . .17
Connection to anAudio System . . . . . . . . . . . . . . . .18
DVR (Initial Setups) . . . . . . . . . . . . . . . . . .19
OSD Language Setting . . . . . . . . . . . . . . . . . . . . . . .19
Turn on the Unit for the FirstTime . . . . . . . . . . . . . . . .19
To change the On-Screen Language . . . . . . . . . . . . . . . . .19
Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Getting ChannelsAutomatically . . . . . . . . . . . . . . . . . . .20
Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . .21
Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Setting Daylight SavingTime . . . . . . . . . . . . . . . . . . . . . . .24
TVAudio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
DVR (Recording) . . . . . . . . . . . . . . . . . . . .26
Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
OneTouch Recording (OTR) . . . . . . . . . . . . . . . . . . .27
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Editing theTimer Programming Information . . . . . . . . .30
Hints forTimer Recording . . . . . . . . . . . . . . . . . . . . . . . .31
Recording & Playback Navigator . . . . . . . . . . . . . . .32
Guide to the Programmed Recordings Screen . . . . . . . .32
Programming a Recording with
the Recording & Playback Navigator . . . . . . . . . . . . . . . .33
To Change or Cancel the Program . . . . . . . . . . . . . . . . .33
Playback and Edit with Programmed Recordings . . . . . .33
Settings for the External Devices . . . . . . . . . . . . . . .34
Dubbing from the External Devices . . . . . . . . . . . .35
DVR (Playback) . . . . . . . . . . . . . . . . . . . . .36
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Playback from theTitle List . . . . . . . . . . . . . . . . . . . . . . .36
Playback from theTitle List Menu . . . . . . . . . . . . . . . . . .37
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Special Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . . . . . .38
Slow forward / Slow reverse . . . . . . . . . . . . . . . . . . . . . .38
Time Shift Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Simultaneous Playback and Recording . . . . . . . . . . . . . .39
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Step-by-Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Using SKIP H / G . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Using DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Series Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Selecting a Format ofAudio andVideo . . . . . . . . . .46
Audio Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Visual Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . .47
DVD (Setups) . . . . . . . . . . . . . . . . . . . . . . .79
DVD SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . .80
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
PARENTAL Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Language Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
FrequentlyAsked Questions . . . . . . . . . . . . . . . . . . .94
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
LIMITEDWARRANTY . . . . . . . . . . . . . . . . . . . . . . .96
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Features
The following features are available with this unit.
DVR
DVD
Recording
This unit only allows you to record on the DVR.
Playback
Progressive Scan System [ Page 16]
Unlike the standard definition output system (interlace
scanning),the progressive scan system provides less
flickering and higher resolution images than the traditional
scanning system does.
80GB Hard Disc (DVR) [ Pages 26~35]
This unit is equipped with a DVR with 80 GB hard disc
which allows you to record up to 34 hours.
Recording and Playback Navigator
[
Pages 32~33]
Dolby Digital Sound [ Page 82]
You can easily program recording or call and replay a title
which is recorded in the past on the calendar.
By hooking this player up to a Multi - Channel Dolby
Digital decoder,you can enjoy high-quality Dolby Digital
Multi - Channel surround sound as heard in the movie
theaters.
OneTouch Recording (OTR)
[
Page 27]
This feature allows you to start the recording right away
with just one-touch. And each press of REC / OTR
increases the recording time by 30 minutes.
Pause/Step-by-Step Playback/Fast Forward/Fast
Reverse/Slow Forward/Slow Reverse
[
Pages 60~62]
Various playback modes are available including still
pictures,fast forward/reverse,slow motion and step
frames.
Timer programming up to 32 programs
[
Page 28~31]
You can program the unit to record up to 32 programs
within a one-month period. Daily or weekly repeating
programs can also be programmed.
Random Playback (forAudio CD,MP3 andWMA)
[
Page 71]
This player can shuffle the order of tracks to play them in
random order.
Automatic Chapter Marker [ Page 54]
Each recorded title is automatically marked with chapter
marks.
Program Playback (forAudio CD,MP3 andWMA)
[
Page 72]
Playback
Simultaneous Recording [ Page 39]
You can record on the DVR during DVD playback.
You can program the order of tracks to play them in any
desired order.
DVD menus in a desired language [ Page 80]
You can display DVD menus in a desired language,if
available on a DVD.
Theater-quality Sound at Home [ Page 18]
When connecting the unit to an amplifier or a decoder
that is compatible with Dolby Digital, you can experience
a theater-quality sound environment.
Time Shift Playback [ Page 39]
You can play back from the top of the DVR Recording title
while recording without waiting for the recording to end.
Series Search [ Page 44]
You can search for the group of titles made with the same
PeriodicalTimer Recordings.
Editing
DeletingTitles [ Pages 48~49]
You can delete titles you no longer need.
ProtectingTitles [ Page 50]
You can prevent accidental title erasing.
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Features (Cont’d)
Symbols Used in this Manual
The available functions depend on the type of disc. To
specify disc type for each function, we put the following
symbols at the beginning of each function description.
Auto Power Off [ Page 85]
The power turns off automatically if there is no activity at
the player or its remote for more than 30 minutes.
Symbol
Description
Subtitles in a desired language [ Page 80]
You can select a desired language for the display subtitles,
if that language is available on a disc.
Available to DVR (internal HDD)
Available to DVD discs
DVR
DVD
CCDD
Selecting a camera angle [ Page 75]
You can select the desired audio language and sound
mode,if different languages and modes are available on a
disc.
Available to Audio CDs
Available to CD-RW / R discs with
MP3 files
MP3
Choices for audio setting and sound mode
[
Page 82]
Available to CD-RW / R discs with
WMA files
WMA
When connecting the unit to an amplifier or a decoder
that is compatible with Dolby Digital, you can experience
a theater-quality sound environment.
Windows Media and theWindows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
This unit is not compatible with Multiple Bit
Rate (MBR: a file that contains the same
content encoded at several different
bit rates).
Parental lock [ Page 83]
You can set the control level to limit playback of discs
which may not be suitable for children.
Automatic detection of discs [ Page 85]
This player automatically detects if a loaded disc is DVD-
Video, Audio CD,MP3 orWMA.
“WMA” (Windows MediaAudio) is a new audio
®
developed by Microsoft in the United States ofAmerica.
Playing an MP3 /WMA disc [ Page 64]
You can enjoy MP3 /WMA files which are recorded on
CD-RW/R.
Direct Search [ Pages 65~68]
You can search the desired title,chapter,marker and track
with the numeric buttons during playback or in stop
mode.
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Information on Recording (DVR)
About DVR (HDD)
Restrictions on recording
DVR is a special component which has high recording
density and is suited for long-time recording or high-speed
cueing but by contrast,has many factors which can cause
breakage.Use DVR on the premise that you should dub the
recorded programs to a DVD disc or a videotape to protect
your precious videos.
You cannot record copy protected discs or tapes using this
unit.Copy protected material includes DVD-Video and
some satellite broadcasts.
If copy protected material is encountered during a
recording,recording will be paused or stop automatically
and an error message will be displayed on-screen.
Copy-once programs can be recorded on the DVR
DVR is a temporary storage location.
DVR is not a permanent storage location of the recorded
contents.Be sure to use it as a temporary storage location
until you watch the programs once dub them to a DVD disc
or a videotape.
Maximum Recordable numbers of title /
chapters
DVR: 300 titles
999 chapters per title
Information on copy control
Some satellite broadcasts include copy-protected
information.For their recording,refer to the following.
Be sure to dub (back up) data promptly if you
find abnormalities in DVR.
If there is mechanical trouble with the DVR,grinding or
other sounds may be heard or blocky noise may appear on
the image.If you continue to use as it is,deterioration may
continue and eventually the DVR may not be used at all.If
you notice these symptoms of a failing DVR,promptly dub
the data to a DVD disc or a videotape.
When an DVR fails,recovery of recorded content (data)
may be impossible.
About the remaining capacity of DVR
recording time:
In recording to DVR,the Remaining Capacity Display may
differ from the actual recordable time as this unit adopts
Variable Bit Rate encoding,which varies the recording
(storage) amount of data in conformity with the information
amount of video.Before recording to the DVR,ensure there
is sufficient space on the DVR by deleting unnecessary titles
in advance.
Recording speed
This unit is equipped with a DVR with 80 GB hard
disc which allows you to record up to 34 hours.
You can not select a recording speed.
* The recording time is an estimate and actual recording
time may differ.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Information on Playback
Before you play back DVD discs,read the following
information.
Region codes
This unit has been designed to play back DVD discs with
Region One (1). DVDs must be labeled forALL regions or
for Region 1. You cannot play back DVDs labeled for other
regions. Look for the symbols below on your DVDs. If
these region symbols are not on your DVD,you cannot play
back the DVD on this unit.
Playable discs
This unit is compatible with the discs mentioned on
page 56.
To play back a DVD,make sure that it meets the
requirements for region codes and color systems described
in this section. Discs with the following logos can be played
back on the unit. Playback of other disc types is not
guaranteed.
Color systems
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only be played back
on the unit with the same region code.
DVDs are recorded in different color systems throughout
the world. The most common color system is NTSC (which
is used primarily in the United States and Canada).
This unit uses NTSC,you must use DVDs recorded in the
NTSC system. You cannot play back DVDs recorded in
other color systems.
Play the recorded contents
You can select the title you want to play from theTitle List.TheTitle List can easily be accessed by pressing TOP MENU.
The recorded titles can also be called up by pressing PROGRAM RECORDINGS (DVR only).
Start Rec.
Stop/Start
Stop Rec.
What are titles and chapters?
The contents on the DVR / DVD are generally divided into titles. Titles may be
further divided into chapters.
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Note
• DVD-RW/R discs and CD-RW/R discs recorded on a personal computer or a DVD or CD recorder may not be
played back if the disc is damaged or dirty or if there is dirt of condensation on the player’s lens.
• If you record on a disc using a personal computer, there are cases in which it may not be played back because of the
settings of the application software used to create the disc, even if it is recorded in a compatible format. (Check
with the software publisher for more detailed information.)
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Functional Overview
The unit can also be turned on by pressing these buttons.
*
Front Panel
Rear Panel
1
2
3
4
5
6
7*
8
9
10*
11
REC/OTR
PAUSE
STOP
PLAY
OPEN/CLOSE
DVR
DVD
POWER
CHANNEL
16
15
14
13 12
17
18
19 20
21
22 23 24
COMPONENT
VIDEO OUTPUT
VIDEO OUT
Y
VIDEO IN
IN
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
S-VIDEO
PB/
CB
L
L
L
R
PR/
CR
OUT
ANTENNA
R
R
2
1
COAXIAL
AUDIO IN
OUT
AUDIO OUT
26
25
1 POWER indicator:Lights up when the power is on.
2 DVR indicator:Lights up when DVR mode is selected.
17 AC Power Cord:Connect to a standardAC outlet to
supply power to this unit.
18 COAXIAL DIGITALAUDIO OUT:Connect anAV
receiver, Dolby Digital decoder or other equipment
with a coaxial digital input jack with an audio coaxial
digital cable.
3 DVD indicator:Lights up when DVD mode is
selected.
4
I REC / OTR :Press once to start a basic recording.
Press repeatedly to start an OTR (OneTouch
Recording). Each press increases the recording time by
30 minutes up to eight hours.
19 VIDEO OUT:Connect the video input of aTV
monitor, AV receiver, or other equipment here using
the supplied video cable.
5
6
7
F PAUSE :Press to pause playback or recording.
20 COMPONENTVIDEO OUT:Connect the
component video input of aTV monitor, AV receiver,
or other equipment here using a commercially available
component video cable.(DVD mode only)
C STOP :Press to stop playback or recording.
B PLAY * :Press to start or resume playback.Press and
hold for 5 seconds to set the Progressive Scan mode on /
off.(DVD mode only)
21 S-VIDEO OUT:Connect the S-Video input of aTV
monitor, AV receiver, or other equipment here using a
commercially available S-Video cable.
8 Remote control sensor:Receives signals from the
remote control.
9 Display:Shows information and messages.
10 A OPEN / CLOSE * :Press to open / close the disc
22 VIDEO IN(LINE1) :Connect the video output of an
external device here using the supplied video cable.
tray.
23 TVANTENNA IN:Use to connect an antenna.
11 Disc tray:Place a DVD here.
24 TVANTENNA OUT:Use to connect an antenna
cable to pass the signal from theTVANTENNA IN to
yourTV monitor.
12 D/ G (SKIP/FWD) :During playback,press to skip to
the next title,chapter,or track. During playback,press and
hold for 2 seconds for fast forward.When playback is
paused,press and hold for 2 seconds for slow forward
and press repeatedly for step by step playback.
25 AUDIO IN(LINE1) :Connect an external equipment
here using a supplied audio cables.
26 AUDIO OUT :Connect the audio input of aTV
monitor, AV receiver, or other equipment here using
the supplied audio (L / R) cables.
13 H /E (SKIP/REV) :During playback,press to skip
to the previous title,chapter,or track
During playback,press and hold for 2 seconds for fast reverse.
When playback is paused,press and hold for 2 seconds for slow
reverse and press repeatedly for step by step playback.
Note: Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
14 CHANNEL K / L:Press to change the channel.
15 Device select button :Press to switch the device
mode between DVR and DVD.
16 POWER:Press to turn the unit on / off. The red LED
is lit when the power is on.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Functional Overview (Cont’d)
Front Panel Display
4
2
3
TIME
P-SCAN
1
PM
SHIFT
5
6
DVR
CD
7
1 PM : Appears in the afternoon with the Clock Display.
2 TIME SHIFT(DVR) :
5
I DVR :Lights up during recording with DVR.
6 Disc type and current status of the unit
: Appears when an audio CD or the other disc
Appears during theTime Shift Playback.
CD
3 Title /Track and Chapter mark
is on the disc tray.
: Appears when indicating a title / track number.
: Appears when indicating a chapter number.
4 Current status of the unit
7 Displays the following
• Played-back time
• Current title / chapter / track number
• Recording time
• Clock
• Channel number
• Remaining time for a OneTouch Recording
: Appears whenTimer Recording is in standby,
or is proceeding.
Disappears when all theTimer Recordings are
finished.
P-SCAN :
Appears when the picture output is progressive scan.
(DVD mode only)
Display message
Appears when the unit is
turning on.
Appears when the unit is
turning off.
Appears when the disc tray is
opening.
Appears when a disc is loaded on
the disc tray.
Appears when the disc tray is
closing.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Functional Overview (Cont’d)
Remote Control
12 SKIP H:(DVR) Press to skip to the chapter.
Or when playback is paused, press to play back in
reverse step by step.
(DVD) Press to skip to the previous title,chapter or
track.
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
1
2
33*
31
32
1
4
2
5
8
0
3
6
13 PLAY B* :Press to start or resume playback.
3
14 REV E:During playback, press to play back in fast
reverse. Or when playback is paused, press to play
back in slow reverse.
15 STOP C:(DVR) Press to stop playback or recording.
(DVD) Press to stop playback.
16 REC / OTR:(DVR)
PROGRAM
RECORDINGS
7
9
30
29
28
26
CLEAR
+10
MODE
AUDIO
4
ZOOM SUB TITLE ANGLE
27
25
5
6
MENU
TOP MENU
7
8
Press once to start a basic recording. Press repeatedly
to set a OneTouch Recording.
ENTER
9
DISPLAY
RETURN
24
22
10
11
17 SEARCH:(DVD) Press to access the search menu.
18 REPEAT:(DVD) Press to access the repeat function.
19 A-B:(DVD) Press to access the repeatA-B function.
20 PAUSE F:(DVR) Press to pause playback or basic
recording.
23
21
SKIP
REV
DVR
DVD
SKIP
FWD
12
13*
PLAY
STOP
14
15
REC/OTR
PAUSE
A-B
20
18
16
17
SEARCH REPEAT
(DVD) Press to pause playback.
19
21 FWD D:During playback, press to play back in fast
forward.Or when playback is paused, press to play
back in slow forward.
22 SKIP G: (DVR) Press to skip to the chapter.
Or when playback is paused, press to play back in
forward step by step.
(DVD) Press to skip to the next title, chapter or
track.
23 DVD:(DVD) Press to activate the remote control and
The unit can also be turned on by pressing these
buttons.
*
switches the unit in DVD mode (refer to page 13).
24 RETURN
:Press to return to the previously
displayed screen.
1 POWER:Turns the unit on / off.
25 TOP MENU:Press to call up theTitle menu.
2 SET UP:Press to display the Setup menu.
26 ANGLE:(DVD) Press to select camera angles on a disc.
27 AUDIO:(DVD) Press to select audio languages on a disc.
28 MODE:(DVD) Press to set the black level and virtual
surround on / off.
3 Number Buttons:
Press to select channel number.
Press to select a title / chapter / track on display.
Press to enter setting values.
Press to start the index / time search.
(CD / MP3 /WMA) Press to set the virtual surround
on / off. Press to access the program / random play screen.
4 CLEAR:(DVR) Press to clear the program once
entered in theTimer Recording setting mode
.
29 +10:(DVD) Press to enter the desired numbers which
(DVD) Press to clear the password entered or the
program once entered,etc.
are higher than 9.
30 PROGRAM RECORDINGS:(DVR) Press to call up
5 ZOOM:(DVD) Press to access the zoom function.
6 SUBTITLE:(DVD) Press to access the subtitle menu.
7 MENU: (DVD) Displays the Disc menu.
the Programmed Recordings Screen.
31 CHANNEL
/
:Press to change the channel up /
down.
8 ENTER:Press to confirm or select menu items.
32 TIMER PROG.:(DVR) Press to access the timer
program menu.
9
/
/
/
:Selects items or settings.
33 OPEN / CLOSE A* :(DVD) Press to open / close
10 DISPLAY:Displays the on-screen menu.
the disc tray.
11 DVR:(DVR) Press to activate the remote control and
switches the unit in DVR mode (refer to page 13).
Note
• Buttons indicated in blue effects only DVR mode.
• Buttons indicated in orange effects only DVD mode.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Functional Overview (Cont’d)
Installing batteries in the remote control
IR signal check
Install twoAA-size batteries (supplied), matching their
polarity to those indicated inside the battery compartment
of the remote control.
Use theAM radio or the digital camera to check if the
remote control properly sends out the infrared signal.It will
help to define the cause of malfunction.
UsingAM radio
1
3
2
Tune theAM radio to no broadcasting band.
Press any button on the remote control
toward the radio.If the radio receives the
signal from the remote control properly,the
sound will flutter.
Battery use and care
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please follow the instruction below:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries may
have different voltages.
Using digital camera
(including built-in camera of cellular phone)
Press and hold any button on the remote
control toward a digital camera.The remote
control is working if you confirm infrared light
through the digital camera.
• Make sure that the plus and minus ends of each battery
match the indications in the battery compartment.
• Remove batteries from equipment that is not going to
be used for a month or more.
Switching DVR / DVD
Because this product is a combination of a DVR and DVD
Player, you must select first which component you wish to
operate.
• When disposing of used batteries, please comply with
governmental regulations or public rules for
environmental protection that apply in your country or
area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
DVR mode
Press DVR on the remote control.
(Verify that the DVR indicator is lit.)
Using a remote control
DVD mode
Press DVD on the remote control.
(Verify that the DVD indicator is lit.)
Keep in mind the following when using the remote control:
• Make sure that there is no obstacle between the
remote control and the remote sensor of the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light shines on the remote
sensor of the unit.
Device Select button
TIMER
POWER
PROG. OPEN/CLOSE
SET UP
1
4
2
5
8
0
3
CHANNEL
• Remote control for different devices can interfere with
each other. Avoid using remote controls for other
equipment located close to the unit.
6
REC/OTR
P
A
USE
STOP
PLAY
OPEN/CLOSE
POWER
DVR
DVD
PROGRAM
RECORDINGS
CHANNEL
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
• Replace the batteries when you notice a fall-off of the
operating range of the remote control.
• The maximum operable ranges (approximate) from the
unit are as follows.
DVD button
DVR button
ENTER
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
DVR
DVD
REC/OTR
PAUSE
A-B
- Straight line:
23 feet (7 m)
SEARCH REPEAT
DVD indicator
DVR indicator
- Either side of center: 16 feet (5 m) within 30°
-Above:
- Below:
16 feet (5 m) within 15°
10 feet (3 m) within 30°
16feet (5m)
(15°)
REC/OTR
PAUSE
STOP
PLAY
OPEN/CLOSE
DVR
DVD
POWER
CHANNEL
23feet
(7m)
16feet (5m)
(30°)
16feet (5m)
(30°)
10feet (3m)
(30°)
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Functional Overview (Cont’d)
On-Screen Display for DVR Mode
General Information:
Setup Menu:
Press DVR first.
Press DVR first.
In stop mode,press DISPLAY once to show the general
Press SET UP to display “Easy Setting Menu” or
“Advanced Menu”. Choose either menu using
then press ENTER.
information.
/
,
DVR MODE
T
1 / 1
C
1 / 1 0:00:04 CH 12
M
3
4
(
“Easy Setting Menu” consists of those frequently needed.
Resume
*1
*
You can make all required settings using “Advanced Menu”.)
Example :Advanced Menu
Advanced Menu
DVR
20:56
CH 12
Erase All in DVR
DVR Menu
2
Initial Setup
Timer Program
Easy Setting Menu
Each section includes the information as listed below:
1
2
Resume Playback status
Recording status
• Recording channel number
• Remained time of the DVR
3
4
Current audio status
Current channel number
Using
/
,select a menu,then press ENTER.
These information will appear during playback or
when the resume playback point is memorized.
*
Display Menu:
Advanced Menu
During playback in DVR mode,press DISPLAY once to
show the information on the current operation status.
Press DISPLAY one more time to show the icons for the
available features.
OSD Language
DVR Menu
Clock Setting
Initial Setup
Channel Setting
Playback
Timer Program
DVR MODE
T
8 / 8
C
1 / 4 0:00:04/ 1:30:00
2
3
Record
DVR Play
FEB/ 2 8:53 CH12
Easy Setting Menu
Reset to factory default
Using
/
,select an Item to set,then press ENTER.
Sub menu or option window will appear.
1
Press DISPLAY.
Advanced Menu
OSD Language
DVR Menu
Clock Setting
DVR MODE
T
8 / 8
C
1 / 4 0:00:04/ 1:30:00
OSD Language
Initial S
l Setting
English
?
NR
4
Fraçais
SEARCH
k
Timer P
Español
Record
Easy Setting Menu
Reset to factory default
Each section includes the information as listed below:
1
2
Playback status icon
• Current title number / total number of the titles
Using
press ENTER.
/
/
/
, make your desirable selection,then
•
Current chapter number / total number of the chapters
• Elapsed playback time of the current title / total
time of the title
Note
3
4
• Playback status
• Name of the current title
Icons for the available features:
• This is an example screen only for explanation.
Displayed items varies depending on the actual mode.
•
•
The information will not appear, when there is no title
recorded in the DVR.
Closed Caption andV-Chip will not be displayed while
the Display Information is shown on the screen.
: Search
:Audio
: Repeat
• The Setup Menu in DVR mode will automatically
disappear without any operation during 5 minutes.
: Noise Reduction
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BeforeYou Start
Functional Overview (Cont’d)
On-Screen Display for DVD Mode
Display Menu:
Note for WMA files:
Press DVD first.
1
1-A
1-B
will be displayed after
and
.
Press DISPLAY repeatedly to see the information you
need. The information will change in the order described in
the example below every time you press DISPLAY.
TITLE NAME
1-A
Title name based on tag
information currently in play will be
displayed.
Angle icon appears only when
available on the DVD
Current playback status
ARTIST NAME
1-B
11/16 0:00:00 - 0:03:30
1
Artist name based on tag
information currently in play will be
displayed.
Remaining time of the current chapter
Elapsed time of the current chapter
Setup Menu:
CH(Chapter):
Current chapter number / Total chapters
Press DVD first.
Press SET UP to display SETUP Menu. Choose QUICK
SETUP Menu or CUSTOM Menu using , then press
ENTER to display it. These menus allow you to perform all
1/3 0:00:00 - 1:23:45
2
/
Remaining time of the current title
Elapsed time of the current title
main functions and change setting for them.
TT(Title):
Current title number / Total titles
Example : DVD (CUSTOM Menu)
T
L1
Layer numbers, appears only when
playing a two-layered disc
L0: Layer 0 is playing
3
QUICK SETUP
L1: Layer 1 is playing
PLAYER MENU
TV ASPECT
ENGLISH
4:3 LETTER BOX
BITSTREAM
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat
DOLBY DIGITAL
T:Title repeat
Using
/
,select a menu,then press ENTER.
BIT RATE:The amount of audio and video
data currently being read
Example :Audio CD
Current playback status
4/12 0:03:21 - 0:02:15
T
1
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
LANGUAGE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
ALL:
Current track number / Total tracks
ENTER
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears only
2
when the repeat setting is active
Using
/
,select an Item to set,then press ENTER.
T
:Track repeat
: Disc repeat
Sub menu or option window will appear.
A
Remaining time of the entire disc
Elapsed time of the entire disc
Note for Audio CD:
• When you are playing a disc in PROGRAM or RANDOM mode,
2
PROGRAM (or RANDOM) will be displayed instead of
.
LANGUAGE
Example : MP3 / WMA
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
Current playback status
SUBTITLE
DISC MENU
PLAYER MENU
TRACK 01
1
The name of the file currently in
play will be displayed.
ENTER
Using
ENTER.
/
, make your desirable selection,then press
TR(Track):
Current track number / Total tracks
1/36 0:01:15
T
2
3
Current repeat setting, if active
: LANGUAGE menu
: DISPLAY menu
:AUDIO menu
T :Track repeat
G : Group (folder) repeat
A : Disc repeat
Elapsed playing time of the current
track
PROGRAM
RANDOM
: PARENTAL menu
: OTHERS menu
or
(Only when you are playing a disc in PROGRAM or RANDOM mode.)
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to aTV
Antenna
Antenna
(Back of TV)
Cable
TV signal
Cable
TV signal
(Back ofTV)
3
4
Plug in the AC power
cord of this unit.
or
or
Connect
RF cable
(supplied)
1
COMPONENT
T
Y
VIDEO OUTPUT
VIDEO IN
IN
Disconnect
S-VIDEO
PB/
CB
L
Note
L
• You can connect to TV
with A/V cables and RF
cable.
R
2
PR/
CR
OUT
ANTENNA
R
1
AUDIO IN
OUT
O
OUT
Connect
(Back of this unit)
Choose one of the following connections,depending on the capabilities of the equipment you possess.
Basic Audio Connection
Video Connections
Method 1
Method 2
Method 3
Good picture
Basic Audio
Better picture
Best picture
(Compatible
with the
TV
COMPONENT
VIDEO IN
Progressive
Scan mode)
AUDIO IN
VIDEO IN
S-VIDEO IN
Y
CB
CR
Audio cable
(supplied)
Video
cable
(supplied)
S-Video
cable
(commercially
available)
Component
video cable
(commercially
available)
This unit
COMPONENT
VIDEO OUTPUT
S-VIDEO
VIDEO OUT
VIDEO OUT
Y
VIDEO OUT
PB/
CB
AUDIO OUTPUT
BITSTREAM
L
L
L
L
L
L
R
R
2
1
COAXIAL
AUDIO OUT
OUT
PR/
CR
R
R
R
R
2
1
2
1
AUDIO OUT
AUDIO OUT
COMPONENT
VIDEO OUT
VIDEO OUT
S-VIDEO OUT
AUDIO OUT
Note
• Connect this unit directly to the TV.
• You will not be able to hear all of the sound being output by this unit if you use the video/audio cables
(supplied) to a monauralTV that has only one audio input jack.
• Be sure that the colors of the jacks and plugs match up when connecting the cable.
• If your TV is compatible with the Progressive Scan System, and you want to utilize its feature, use the
COMPONENTVIDEO OUT connection. If you use any other connection such as VIDEO OUT or S-VIDEO OUT,
the picture will not be output in the Progressive Scan mode but in the standard output mode (Interlace).
If yourTV is compatible with 525p (480p) progressive scanning and you want to enjoy the high quality picture;
You must select the connection Method 3 to utilize the progressive scanning mode.To set the mode on/off, press and
hold B PLAY on the front panel for more than 5 seconds so that “P-SCAN” will appear on the Front Panel Display.
(The progressive scanning is not available in the DVR mode.)
yourTV is not compatible with Progressive Scan
If
;
Use this unit in the interlace mode. Make sure that no “P-SCAN” is on the Front Panel Display. If “P-SCAN” is on
the Front Panel Display, press and hold B PLAY on the front panel for more than 5 seconds to turn it off.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to aTV (Cont’d)
After you have completed connections
Turn yourTV to the appropriate external input channel (usually near channel 0) in order to view the pictures output
from this unit on theTV. To find the external input channel press the channel button on yourTV’s remote repeatedly until
the picture appears.External input channels may vary depending on the connection you made.Check yourTV owner’s
manual for details.
Input Mode Names for CommonTV Brands (Example)
Admiral
Curtis Mathis
GE
AUX
Panasonic
TV/VIDEO
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT,TV /VCR, 00, 90, 91, 92, 93
INPUT,AUX
RCA
INPUT,TV /VCR, 00, 90, 91, 92, 93
Samsung
Sanyo
TV/VIDEO
Hitachi
VIDEO
JVC
VIDEO,VIDEO1,VIDEO2,VIDEO3
AUX
Sharp
00
Kenwood
LXI-Series
Magnavox
Sony
VIDEO1,VIDEO2,VIDEO3
00
Toshiba
Zenith
TV / GAME
00
AUX CHANNEL
Connection to a Cable Box or Satellite Box
(Back of this unit)
(Cable box or
Satellite box)
EO IN
IN
CableTV signal
IN
OUT
E
RF cable
(supplied)
R
OUT
ANTEA
AUDIO IN
(Back of TV)
This connection allows you to view or record a scrambled channel. With this connection,channels cannot be changed on
this unit. You can view or record ONLY the channels you have selected on the cable box or the satellite box.
• Read the instruction manual of the cable box or the satellite box also.
Note to the CableTV System Installer:
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding–in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to anAudio System
• When you change the connections,all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Method 2
Stereo system
Dolby Digital decoder,
MD deck or DAT deck
Analog audio
input jacks
AUDIO
COAXIAL
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
This unit
DIGITAL
AUDIO OUT
VIDEO OUT
COAXIAL
L
L
AUDIO OUT
For DVR mode:
R
R
2
1
AUDIO OUT
SETUP >Initial Setup >Playback >Audio Out >
Setting
Connection
Dolby Digital
Stream
If output is Dolby Digital
encoded audio,connect to a
Dolby Digital decoder.
Unless connected to a Dolby
Digital decoder.
PCM
PCM
Connecting to an MD deck or
DAT deck.
For DVD mode:
SETUP >QUICK >DOLBY DIGITAL >
Setting
Connection
DOLBY DIGITAL
If output is Dolby Digital
encoded audio,connect to a
Dolby Digital decoder.
BITSTREAM
PCM
Unless connected to a Dolby
Digital decoder.
PCM
Connecting to an MD deck or
DAT deck.
*To complete these settings.(See page 53 for DVR and 82
for DVD.)
Note
• By connecting this unit to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital Multi-channel surround sound as heard in the
movie theaters.
• The audio source on a disc in a Dolby Digital Multi-
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may
generate noise distortion and may also damage the
speakers.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
OSD Language Setting
Turn on the Unit for the FirstTime
Right after the purchase of the unit,do the initial setting by
taking the following procedures.
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press POWER.
1
2
Turn on theTV. Select the appropriate external input
channel. (See page 17.)
1
4
2
5
8
0
3
6
CHANNEL
MODE
PROGRAM
RECORDINGS
TV's remote
control
7
9
*This button can
CLEAR
+10
MODE
AUDIO
be labeled as
INPUT,AUX, etc.
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using
/
,select a desired language.
3
4
OSD Lannguage
English
ENTER
Fraçais
Español
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
Press ENTER to startAuto Setups.
PLAY
STOP
To change the On-Screen Language
REC/OTR
PAUSE
A-B
Press DVR first,then press SET UP.
1
SEARCH REPEAT
“Easy Setting Menu” or “Advanced Menu” will appear.
Advanced Menu
Erase All in DVR
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Using
/
,select “Initial Setup”. Press ENTER.
2
Advanced Menu
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Record
Reset to factory default
Using
Press ENTER.
/
,select “OSD Language”.
3
4
OSD Language Menu will appear.
Using
/
,select a language. Press ENTER.
Your setting is now activated.
• The default setting is “English”.
Press SET UP to exit.
5
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
Channel Setting
Getting ChannelsAutomatically
W
henever you move to a new area,we recommend you to
TIMER
PROG.
do this again to get available channels in your area.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
Press SET UP.
1
“Easy Setting Menu” or “Advanced Menu” will appear.
PROGRAM
RECORDINGS
Advanced Menu
7
9
Erase All in DVR
DVR Menu
CLEAR
+10
MODE
AUDIO
Initial Setup
Timer Program
Easy Setting Menu
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
ENTER
Using
Press ENTER.
/
,select “Initial Setup”.
2
DISPLAY
RETURN
Advanced Menu
SKIP
REV
DVR
DVD
SKIP
FWD
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
PLAY
STOP
REC/OTR
PAUSE
A-B
Timer Program
Easy Setting Menu
Record
SEARCH REPEAT
Reset to factory default
Using
Press ENTER.
/
,select “Channel Setting”.
3
4
Channel Setting Menu will appear.
Channel Setting
Auto Preset
Manual Preset
TV Audio Select
Using
/
,select “Auto Preset”. Press ENTER.
The unit will start getting channels available in your
area.
Auto Preset
Wait for several minutes for channel scanning to be
completed.
Note
• If the auto presetting is canceled during presetting,
some of the channels not yet preset may not be
received.
After Auto Preset has stopped:
• Use CHANNEL
/
or the Number
Buttons to change the channel.
• When you use the Number Buttons, press 0
first for a single digit number.
• The selection will depend on how you receive the TV
channels.
• To cancel the Auto Preset during scanning, press
RETURN
.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
Channel Setting (Cont’d)
Adding / Deleting Channels
Using
Press ENTER.
/
,select “Add” or“Delete”.
6
The channels you no longer receive or seldom watch can be
deleted from the memory. You can also add channels
manually into the memory.
The channel number will be added or deleted from
the channel memory. Then, the next channel
number will appear so that you can continue adding
or deleting channels.
Press SET UP.
1
“Easy Setting Menu” or “Advanced Menu” will appear.
CH 1
Add
Advanced Menu
Delete
Erase All in DVR
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Press SET UP to exit.
7
Using
/
,select “Initial Setup”.
Note
2
Press ENTER.
• External input channels (“L1”) cannot be skipped.
• You cannot change the channel while the unit (DVR)
is in the basic recording, OTR or Timer Recording
mode.
Advanced Menu
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Record
Reset to factory default
Using
Press ENTER.
/
,select “Channel Setting”.
3
4
5
Channel Setting Menu will appear.
Channel Setting
Auto Preset
Manual Preset
TV Audio Select
Using
Press ENTER.
/
,select “Manual Preset”.
Option window will appear.
CH 1
Add
Delete
Using
delete.
/
/
,select the channel number to add or
or CHANNEL to change the
•
Use
/
channels one by one, or use the Number Buttons
to select the channel directly
.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
Clock Setting
Set the clock before you tryTimer Recording. If Public
Broadcasting Service (PBS) is available in your area,follow
theAuto Clock Setting below. If not,refer to‘Manual Clock
Setting’ on page 23.
Make sure the antenna / cableTV connections are correct.
• You cannot set the clock while the unit is in the basic
recording,OTR orTimer Recording mode.
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
1
4
2
5
8
0
3
6
Auto Clock Setting
If this unit is connected to a Cable Box or Satellite Box,
select the local PBS station to set the clock automatically.
Press DVR first.
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Press SET UP.
1
“Easy Setting Menu” or “Advanced Menu” will appear.
MENU
TOP MENU
Advanced Menu
Erase All in DVR
DVR Menu
ENTER
Initial Setup
Timer Program
Easy Setting Menu
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
Using
/
,select “Initial Setup”. Press ENTER.
2
Advanced Menu
SEARCH REPEAT
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
Record
Reset to factory default
Using
Press ENTER.
/
,select “Clock Setting”.
3
4
Clock Setting Menu will appear.
Clock Setting
Clock Setting
Auto Clock Setting
Daylight Saving Time
Using
Press ENTER.
/
,select “Auto Clock Setting”.
Option window will appear.
Auto Cloock Setting
Off
Auto
Manual
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
Clock Setting (Cont’d)
Manual Clock Setting
If you do not know the PBS channel number
in your area :
5
Press SET UP.
1
Using ,select “Auto”. Press ENTER.
/
“Easy Setting Menu” or “Advanced Menu” will appear.
Your setting is now activated.
Advanced Menu
Erase All in DVR
DVR Menu
If you know the PBS channel number
in your area :
Initial Setup
Timer Program
Easy Setting Menu
Using
/
, select “Manual”. Press ENTER.
Input window will appear.
Set Channnel No.
CH 1
Using
/
,select “Initial Setup”. Press ENTER.
2
Advanced Menu
Using the Number Buttons or
PBS channel number. Press ENTER.
Your setting is now activated.
/
, enter the
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
Timer Program
Easy Setting Menu
If you want to set the clock manually and to
cancel the Auto Clock Setting :
Record
Reset to factory default
Using
/
, select “Off”. Press ENTER.
The Auto Clock Setting will be canceled.
Using
Press ENTER.
/
,select “Clock Setting”.
3
4
• The default setting is “Auto”.
Clock Setting Menu will appear.
Press SET UP to exit.
6
7
Clock Setting
Clock Setting
Press POWER to turn off the unit.
Auto Clock Setting
Daylight Saving Time
This unit will search for the clock time only when
the power is off. Leave it off for several minutes to
give the unit a time to set the clock.
Using
Press ENTER.
/
,select “Clock Setting”.
Clock Setting Window will appear.
Note
• The clock may set itself automatically after you
connect the antenna / cable signal to this unit and
plug in the power cord. In this case, the current time
will appear on the Front Panel Display.
Clock Setting
JAN
/
1
/
2006 (Sun)
-- : -- AM
• If the current time is not displayed or the displayed
clock time is not correct, set the clock manually.
Using
using
time.
/
/
,move to the item you want to set and
,change the setting the current date and
5
6
When all the information is entered,press ENTER.
Your setting is now activated.
Although seconds are not displayed, they will be
counted from zero.
Press SET UP to exit.
7
Note
• Your clock setting will be lost if either there is a
power failure or this unit has been unplugged for
more than 30 seconds.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
Clock Setting (Cont’d)
Setting Daylight SavingTime
When Daylight SavingTime is on,the clock will automatically
move forward one hour at 2:00AM on the first Sunday in
April and move back one hour at 2:00AM on the last Sunday
in October.
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
CHANNEL
Press SET UP.
1
“Easy Setting Menu” or “Advanced Menu” will appear.
PROGRAM
RECORDINGS
7
9
Advanced Menu
CLEAR
+10
MODE
AUDIO
Erase All in DVR
DVR Menu
ZOOM SUB TITLE ANGLE
Initial Setup
Timer Program
Easy Setting Menu
MENU
TOP MENU
ENTER
DISPLAY
RETURN
Using
/
,select “Initial Setup”. Press ENTER.
2
Advanced Menu
SKIP
REV
DVR
DVD
SKIP
FWD
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
PLAY
STOP
REC/OTR
PAUSE
A-B
Timer Program
Easy Setting Menu
Record
SEARCH REPEAT
Reset to factory default
Using
Press ENTER.
/
,select “Clock Setting”.
3
4
Clock Setting Menu will appear.
Clock Setting
Clock Setting
Auto Clock Setting
Daylight Saving Time
Using
Press ENTER.
/
,select “Daylight SavingTime”.
Option window will appear.
Daylight Saving Time
On
Off
Using
/
,select “On” to activate the Daylight
5
6
SavingTime. Press ENTER.
If you do not want to use the Daylight Saving Time
feature select “Off”.
• The default setting is “On”.
Press SET UP to exit.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Initial Setups)
TVAudio Setting
You can select an audio channel to output fromTV.
Press DVR first.
Follow steps 1 to 4 on page 20 to display the Setup
Menu.
TIMER
PROG.
1
POWER
OPEN/CLOSE
CHANNEL
SET UP
Using
/
,select “Channel Setting”.
2
1
4
2
5
8
0
3
6
Press ENTER.
Channel Setting Menu will appear.
PROGRAM
Channel Setting
Auto Preset
RECORDINGS
7
9
Manual Preset
TV Audio Select
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Using
Press ENTER.
/
,select “TVAudio Select”.
3
4
MENU
TOP MENU
Option window will appear.
TV Audio Select
Stereo
ENTER
SAP
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
Using
Press ENTER.
/
,select “Stereo” or “SAP”.
PLAY
STOP
Stereo:
Outputs main-audio.
REC/OTR
PAUSE
A-B
SAP (Secondary Audio Program):
Outputs sub-audio.
SEARCH REPEAT
Refer to the item in ‘Glossary’ on page 91 for more
information.
• The default setting is “Stereo”.
Press SET UP to exit.
5
Notes onTV channel audio
•
If you want to record a TV program available in second
audio or stereo on DVR, you have to select either
“Stereo” or “SAP” beforehand. Refer to the following
table to check the appropriate setting.
Broadcast audio
Selected DVR
Main-audio Sub-audio audio
recording
channel
STEREO
STEREO
MONO
MONO
STEREO
STEREO
MONO
MONO
channel
SAP
NONE
SAP
NONE
SAP
NONE
SAP
Note
STEREO
STEREO
MONO
MONO
SAP
STEREO
SAP
MONO
• This unit CANNOT record in both STEREO and SAP
(Secondary Audio Program) at the same time.
Stereo
SAP
SAP (SecondaryAudio Program);
• SAP is the Secondary Audio Program which is usually
used as an alternate in bilingual broadcasting, such as
a broadcasting in Spanish.The SAP signal is delivered
using the sub-audio channel.While the main-audio
channel has 2 channels for L & R, the sub-audio
channel has only 1 channel.Therefore, the SAP will
always be broadcasted in monaural sound (outputting
the same sound from the left and the right speakers).
NONE
• You can only play back the disc in second audio if a
TV program is available in second audio and you set
TV Audio Select to SAP.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Basic Recording
DVR
Follow steps below to recordTV programs.
Press DVR first.
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Turn on the TV. Select the appropriate external input
channel. (See page 17.)
1
2
1
4
2
5
8
0
3
6
Using CHANNEL
/
,or the Number
PROGRAM
Buttons,select a desired channel to record.
RECORDINGS
7
9
CH
8
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Press REC / OTR to start recording.
3
MENU
TOP MENU
The information will be displayed for 5 seconds.
ENTER
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
DVR Rec
20:56
0:06:50
CH8
I
PLAY
STOP
REC/OTR
PAUSE
A-B
Press PAUSE F to pause recording.
Press REC / OTR or PAUSE F to resume
recording.
SEARCH REPEAT
Press STOP C to stop recording.
4
Note
• This unit is equipped with a DVR with 80 GB hard
disc which allows you to record up to 34 hours.
You can not select a recording speed.
• Recording starts immediately after you press
REC / OTR and continues until the DVR is full or
you stop recording.
• When the Clock Setting has not been made, the
space for a date and time of title names in the Title
List will be blank.
• When you record aTV program broadcasted
in both Stereo and SAP-audio on the DVR, you
have to select theTV channel audio (Stereo or
SAP) beforehand. Only the selected channel
audio will be recorded. Refer to ‘TV Audio
Setting’ on page 25 for more details.
• Up to 300 titles can be recorded on the DVR.
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
OneTouch Recording (OTR)
When OTR ends,the unit will turn off automatically
DVR
5
except under conditions listed below.
- If aTimer Recording is programmed to start in 5
minutes.
This is a simple way to set the recording time in blocks of
30 minutes.
Press DVR first.
- During playback of DVR.
-While displaying menus or information on the
screen.
Preparing for OTR:
• Check that the DVR has enough recordable space for
the time you set.
-When DVD mode is selected.
• To cancel the OTR in progress,press STOP C.
Turn on the TV. Select the appropriate external input
channel. (See page 17.)
1
Using CHANNEL
Buttons,select a desired channel to record.
/
or the Number
2
3
Note
• The remaining recording time will be displayed on the
Front Panel Display during a One Touch Recording.
Press DISPLAY to see it on the TV screen.
• You cannot pause a One Touch Recording.
• When a power failure occurs, the unit will turn off
automatically in DVR mode.
Press REC / OTR.
Recording will start.
DVR Rec
20:56
0:06:50
CH8
I
Press REC / OTR repeatedly to change the recording
time.
4
DVR Rec
20:56
0:06:50
CH8
I
OTR (0:30)
0:30
(Normal Recording) 1:00
8:00
7:30
The recording time will be extended by 30 minutes
every time you press REC / OTR.
• The maximum recording time is 8 hours.
• With OTR, the recording time that exceeds the
remaining time will not be displayed.
• To change the recording time during the
One Touch Recording, Press REC / OTR
repeatedly.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Timer Recording
DVR
You can program the unit to record up to 32 programs within a
TIMER
PROG.
month in advance.Daily or weekly recordings are also available.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Preparing forTimer recording:
• Be sure to set the clock before programming aTimer
Recording.Refer to‘Clock Setting’ on pages 22-24.
• Check that the DVR has enough recordable space for
the time you set.
1
4
2
5
8
0
3
6
PROGRAM
RECORDINGS
Press DVR first.
7
9
CLEAR
+10
MODE
AUDIO
Press TIMER PROG..
1
Timer Programming List will appear.
ZOOM SUB TITLE ANGLE
1/ 1
TIMER PROGRAMMING
MENU
TOP MENU
Fri FEB/ 3
Date
9:10AM
Start Time
New Program
DVR
End Time
20:38
CH
ENTER
•
You can access this screen from the Setup Menu also.
DISPLAY
RETURN
Using ,select a line indicated “New
Program”. Press ENTER.
/
SKIP
REV
DVR
DVD
SKIP
FWD
2
PLAY
STOP
Timer Programming Window will appear.
4
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Date
FEB /
Start Time
CH
8
End Time
3
9
00
Fri
:
AM
10
:
00 AM
DVR
21:06
1
2
3
5
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Timer Recording (Cont’d)
1 Recording Date:
To exit,press TIMER PROG..
5
When pressing
will change as follows.To go backward, press
at the current date, the setting
•
If you turn the unit off, it automatically turns on and starts
recording 3 minutes before the Timer Recording begins,
and when the recording is completed, you will be asked
whether to turn off the unit.The unit will be turned off
automatically if you select “Yes” or if you do not reply
in 1 minute.
.
e.g.: January 1st
JAN / 01
Mon-Sun
Mon-Sat
Mon-Fri
Sat
•
To stop the recording in progress, press STOP C and
hold it for 2 seconds, or press STOP C on the front
panel.
Note
Fri
• If you have not set the clock yet:
The Clock Setting Window will appear at step 1
instead of Timer Programming List. Continue with
step 4 in ‘Auto Clock Setting’ on page 22 or ‘Manual
Clock Setting’ on page 23 before setting a Timer
Recording.
• After step 5, you can use DVD mode as usual.
• If the starting time and the end time are the same, it
will be recognized as 24 hours recording.
• If the starting time you entered is already in the past,
the recording will start as soon as you activate the
Timer Recording by pressing ENTER at step 4.
Sun
JAN / 31
2 Start Time:
3 EndTime:
4 Recording Channel:
To record from the external input,select “L1”.
(Using camcorder,or other source.)
5 Available recording time left on the DVR.
•
If the Timer Recording you want to make starts at 11:00
PM, for example, and ends at 1:00 AM next day, enter
the date of the starting time, then enter the starting
time as 11:00 PM and end time as 1:00 AM.
• If there are more than one program, the recording
time of the programs other than the one being
edited currently will not be counted in the
calculation of the total remaining time on the DVR.
Using
/
,select an item to set and using
3
4
/
,set the contents to suit your preference.
• Pressing RETURN
information entered.
will resets all the
Press ENTER when all the information is entered.
will appear in the Front Panel Display indicating
one or moreTimer Recordings are in standby.
• To set another program, repeat steps 2 to 4.
•
When programs are overlapped, a warning message
will appear. For details on overlapped Timer
Programmings, refer to ‘Hints for Timer Recording’
on page 31.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Timer Recording (Cont’d)
Editing theTimer Programming
Information
TIMER
PROG.
Press DVR first.
POWER
OPEN/CLOSE
SET UP
PressTIMER PROG..
1
2
Timer Programming List will appear.
1
4
2
5
8
0
3
6
CHANNEL
1/ 1
TIMER PROGRAMMING
Fri FEB/ 3
9:10AM
Start Time
DVR
End Time
20:38
CH
PROGRAM
RECORDINGS
Date
7
9
Fri FEB/ 3
Fri FEB/ 3
Fri FEB/ 3
9:00AM
9:30AM
10:30AM
10:00AM
10:30AM
11:00AM
8
6
4
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Using
/
,select the program you want to edit.
Press ENTER.
MENU
TOP MENU
Editing Menu will appear.
Program Change
ENTER
Delete
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
To change the setting of a program:
3
PLAY
STOP
1. Using
/
, select “Program Change”, then
press ENTER.
Timer ProgrammingWindow will appear.
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Date
FEB /
Start Time
CH
8
End Time
10
00 AM
3
9
00
Fri
:
AM
:
DVR
20:06
2. Using
/
, move to the item you want to
change, then press
/
to change the setting.
Then, press ENTER.
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Timer Recording (Cont’d)
To delete a program from the list:
1. Using , select “Delete”, then press
ENTER.
Hints forTimer Recording
The priority of overlapped settings
When the timer programmings are overlapped,you will
receive a warning message.
If this happens,check the timer programming and change the
programming as necessary.Otherwise,the unit will prioritize
recording as described below.
/
Confirmation window will appear.
Delete this Timer Program?
Yes
No
Same start time and different end time:
The program set first has the priority.
You can access this screen by pressing CLEAR
instead of ENTER at step 2.
PROG. 1
PROG. 2
2. Using
the title.
/
, select “Yes” if you want to delete
Then, press ENTER.
Actual
recording
PROG. 1
PROG. 2
The first 15 seconds (at the longest) will be cut off.
PressTIMER PROG. to exit.
4
Different start time and different end time:
A program with the earlier start time has the priority.
Note
• As to the timer program in progress (which is shown
in red in the Timer Programming List), you only can
edit the end time.The changes made during recording
will be recognized as only specific to that recording
in progress and it will not affect the daily or the
Weekly Recording Setting.
PROG. 1
PROG. 2
PROG. 3
PROG. 3
PROG. 2
Actual
PROG. 1
recording
The first 15 seconds (at the longest) will be cut off.
Recording time is entirely overlapped:
PROG.2 will not be recorded.
PROG. 1
PROG. 2
Actual
recording
PROG. 1
End time of Program 1 is the same as the
start time of Program 2:
PROG. 1
PROG. 2
Actual
PROG. 1
PROG. 2
recording
The last 30 seconds (at the longest) will be cut off.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Recording & Playback Navigator
Guide to the Programmed
Recordings Screen
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
DVR
With the Recording & Playback Navigator,you can easily
program theTimer Recordings for the DVR by using the
calendar displayed on the screen. Also the recorded titles
(programs) can be played back or edited just by selecting the
titles on the display.
• When you press PROGRAM RECORDINGS,the
Programmed Recordings Screen will be displayed on the
TV screen.
1
4
2
5
8
0
3
6
CHANNEL
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Programmed Recordings Screen
PROGRAMMED RECORDINGS
Completed
Scheduled
ENTER
6:00AM - 7:00AM
CH 4
1
2
DISPLAY
RETURN
Previous Recordings
Scheduled Recordings
SKIP
REV
DVR
DVD
SKIP
FWD
SAT SUN MON TUE WED THU FRI
SUN MON TUE WED THU FRI SAT
TODAY
AM
CH
2
4
PLAY
STOP
5
6
7
8
9
CH
8
A
CH
B
4
REC/OTR
PAUSE
A-B
CH
6
SEARCH REPEAT
3
4
1 Preview window:
Playback the preview of recorded programs.
2 Information:
Shows the information on the selected program.
3 Previous recordings:
When the normal recording /Timer Recording has
started,the cell turns blue and the channel number will be
Note
A
displayed.(e.g.
)
• With the Recording & Playback Navigator, you can
program Timer Recordings up to one week ahead.
The recordings programmed for the days more than
one week ahead will not be displayed in the
Programmed Recordings Screen.
4 Scheduled Recordings:
When a programming is completed,the cell turns pink and
B
the channel number will be displayed.(e.g.
)
• You can program more than 1 Timer Recordings in
one cell, but only the timer program that has the
earlier starting time will be displayed in the
Programmed Recordings Screen.
Programmed Recordings Screen shows a two-week calendar.
(One week prior to and one week after the current day.)
• Programmed Recordings can be programmed in this
screen for programs broadcasted during next week.
• If more than one week has passed since recording,the
recorded programs cannot be replayed or edited with
Programmed Recordings.
• To see all the programs entered in a cell, press
REV
h or FWD g.
• If power is failed or unplugged from the outlet, some
information in the Programmed Recordings Screen
may be lost.
• The screen describes each day as a day of the week,
other thanTODAY.
• Only the titles in the DVR can be played back using
the Recording & Playback Navigator.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Recording & Playback Navigator (Cont’d)
Programming a Recording with
the
To change the program
3
Using
/
, select “Program Change”, then
Recording & Playback
Navigator
press ENTER.
Timer Programming Window will appear.
Correct the information, then press ENTER.
Press PROGRAM RECORDINGS.
1
To cancel the program
The Programmed Recordings Screen will appear.
Using
press ENTER.
/
, select “Timer Program”, then
Using ,select the desired cell.
/
/
/
2
Timer Programming List will appear.
Press CLEAR .
• For example, to record from 4:00 pm in two days
from the present day, choose the cell as follows.
Confirmation window will appear. Select “Yes”,
ordings
Scheduled Recordings
THU FRI
SUN MON TUE WED THU FRI SAT
TODAY
using
To program a newTimer Recording
Using , select “New Program”, then
/
and press ENTER.
PM
3
4
5
/
press ENTER.
Cell
Present day
Tomorrow
Day after tomorrow
Press TIMER PROG. to exit.
4
There are two ways to program a recording.
1) Direct Program---Press CHANNEL
/
or
the Number Buttons to select a channel. Press
ENTER.The cell turns pink indicating that the
timer programming is now set in that cell.
Press PROGRAM RECORDINGS to exit.
Playback and Edit with
Programmed Recordings
Press PROGRAM RECORDINGS.
1
2) Detailed Program---Press ENTER
“New Program” will appear.With “New
Program” selected, press ENTER again.
Timer Programming Window will appear.
The Programmed Recordings Screen will appear.
Using
/
/
/
,select the recorded program.
2
3
The recorded program plays back in the preview
window.
Date
FEB /
Start Time
00
CH
8
End Time
10
00 AM
3
9
Fri
:
AM
:
Press ENTER to call up the menu window.
DVR
29:06
Play From Start
Resume Play
Enter the necessary information by following the
instructions described in ‘Timer Recording’ on pages
28-31.
Previous Recordings
To Change or Cancel the
Program
Using
Press ENTER.
/
,select “Play From Start”.
4
Repeat steps 1-2 above.
The recorded program is played back.
1
2
If you want to resume playback from the last
viewed point:
Select “Resume Play”.
Press ENTER to call up the menu window.
Refer to ‘Resume Playback’ on page 37.
Program Change
Timer Program
New Program
To display aTitle List:
Select “Previous Recordings”.
Refer to ‘Playback from the Title List’ on page 37.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Settings for the External Devices
Connect the external source properly to the unit by using input jack,LINE1 (Rear).
When connecting an external equipment of monaural output to this unit,useAUDIO L jack of LINE 1 (Rear).
Use commercially available Video cable and anAudio cable for this type of connection.
OUTPUT
Another source
VIDEO AUDIO
(VCR camcorder etc.)
L
R
Video
cable
Audio
cable
VIDEO IN
L
R
To LINE 1 IN
AUDIO IN
COMPONENT
VIDEO OUTPU
VIDEO OUT
Y
VIDEO IN
IN
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
S-VIDEO
PB/
CB
L
L
L
R
PR/
CR
OUT
ANTENNA
R
R
2
1
COAXIAL
AUDIO IN
OUT
AUDIO OUT
Rear of this unit
Note
• After all the connections are completed, set the DVR
to the external input channel (“L1”) using
CHANNEL
/
.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Recording)
Dubbing from the External Devices
DVR
Before recording from the external device, connect the
TIMER
PROG.
external device correctly by following the direction on page
POWER
OPEN/CLOSE
SET UP
34, and turn the power of the unit and the external device
on.
1
4
2
5
8
0
3
6
Turn on the TV. Select the appropriate external input
channel. (See page 16.)
1
CHANNEL
PROGRAM
RECORDINGS
Press DVR.
2
3
7
9
CLEAR
+10
MODE
AUDIO
Select the appropriate external input channel of this
unit by using CHANNEL
/
to set the channel
ZOOM SUB TITLE ANGLE
to “L1”.
MENU
TOP MENU
Press REC/OTR on the unit to start recording.
4
5
Press PLAY button on the external device to
record from.
ENTER
DISPLAY
RETURN
For DVR:
6
SKIP
REV
DVR
DVD
SKIP
FWD
Press C STOP on the front panel (this unit) first to
stop recording.
PLAY
STOP
This operation may take a
while to be completed.
REC/OTR
PAUSE
A-B
Then, stop the external device.
SEARCH REPEAT
REC/OTR
REC/OTR
PAUSE
STOP
PLAY
OPEN/CLOSE
DVR
DVD
POWER
CHANNEL
C STOP
Note
• To avoid mistakes, it is recommended to use the
buttons on the front panel to operate.
• Read also the instructions for the external device
thoroughly.
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Basic Playback
Direct Playback
TIMER
PROG.
DVR
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
Turn on theTV. Select the appropriate external input
channel. (See page 17.)
1
2
PROGRAM
RECORDINGS
7
9
Press PLAY B to start playback.
CLEAR
+10
MODE
AUDIO
Playback of the last title will start.
• The playback may start from a resume point.
ZOOM SUB TITLE ANGLE
(See page 37.)
MENU
TOP MENU
Press STOP C to stop playback.
3
ENTER
DISPLAY
RETURN
Playback from theTitle List
SKIP
REV
DVR
DVD
SKIP
FWD
DVR
PLAY
STOP
Press DVR first.
REC/OTR
PAUSE
A-B
PressTOP MENU.
1
Title List will appear.
SEARCH REPEAT
PREVIOUS RECORDINGS
1
2
APR/01 12:15PM CH12
CH12
1
2
5
3
6
APR/01/06
12:15PM
MAY/01/06
12:15PM
JUN/04/06
10:00AM
4
JUN/15/06
11:05AM
JUL/05/06
11:40PM
JUL/18/06
10:00AM
• To exit theTitle List,press TOP MENU.
Using
/
/
/
,select a desired title,then press
2
3
PLAY B.
Playback will start.
• Use
one,and use FWD D / REV E to jump to the
next / previousTitle List page.
• For DVR, playback will start from the resume
point. If you want to start it from the beginning,
use the Title List Menu.
/
/
/
to move among the titles one by
Press STOP C to stop playback.
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Basic Playback (Cont’d)
Playback from theTitle List Menu Resume Playback
DVR
DVR
Press DVR first.
You can resume playback from where you stopped last time.
PressTOP MENU.
Press DVR first.
1
Title List will appear.
During playback,press STOP C.
1
PREVIOUS RECORDINGS
Pressing STOP C twice will cancel the Resume
1
2
APR/01 12:15PM CH12
CH12
function.
1
2
5
3
6
APR/01/06
12:15PM
MAY/01/06
12:15PM
JUN/04/06
10:00AM
Press PLAY B.
2
4
Within a few seconds, playback will resume from the
point at which it stopped last. Resume function
stays in effect even if you turn off the power.
JUN/15/06
11:05AM
JUL/05/06
11:40PM
JUL/18/06
10:00AM
• To exit theTitle List,press TOP MENU.
You can set a resume point per every title.
• If you play back from theTitle List Menu,you can choose
“Play From Start” or “Resume Play”.Otherwise
the playback will start from the resume point of the last
played title.
Using
ENTER.
/
/
/
,select a desired title,then press
2
Title List Menu will appear.
PREVIOUS RECORDINGS
• Press STOP C twice at step 1 if you do not want to
set a resume point. In this case, next time you press
PLAY B, the playback will start from the beginning
of the last title in the Title List.
1
2
APR/01 12:15PM CH12
CH12
1
4
2
3
6
Play From Start
Resume Play
APR/01/06
12:15PM
JUN/04/06
10:00AM
Protect
Delete
Search
JUN/15/06
11:05AM
JUL/05/05
11:40PM
JUL/18/06
10:00AM
• Use
/
/
/
to move among the titles one by
one,and use FWD D / REV E to jump to the
next / previousTitle List Page.
Using
/
,select “Play From Start” if you want
3
4
to play the title from the beginning .
Select “Resume Play” if you want to play the title
from the point where it is stopped last time.
Press ENTER.
Playback will start.
Press STOP C to stop the playback.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Special Playback
Fast forward / Fast reverse
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
During playback,press FWD D or REV E.
1
Every time you press FWD D or REV E,
approximate speed will change as follows.
PROGRAM
RECORDINGS
The sound will remain muted.
7
9
CLEAR
+10
MODE
AUDIO
press button
-3
-2
-1
0
+1
+2
+3
: +1
: -1
ZOOM SUB TITLE ANGLE
speed
(DVR)
Normal
speed
x40
x20
x1
x1.5
x20
x40
MENU
TOP MENU
OSD
indication
N/A
ENTER
DISPLAY
RETURN
• To return to the normal playback, press PLAY B.
• Fast forward or fast reverse playback across titles
is not possible.
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
Slow forward / Slow reverse
SEARCH REPEAT
DVR
Press DVR first.
During playback,press PAUSE k.
1
Press FWD D or REV E.
2
Every time you press FWD D or REV E,
approximate speed will change as follows.
The sound will remain muted.
press button
-3
-2
-1
0
+1
+2
+3
: +1
: -1
speed
(DVR)
Normal
speed
x1/4
x1/8
x1/16
x1/16
x1/8
x1/2
OSD
indication
N/A
• To return to the normal playback,press PLAY B.
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Special Playback (Cont’d)
Time Shift Playback
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
You can playback a title being recorded from the beginning
while recording continues.
1
4
2
5
8
0
3
6
CHANNEL
Press DVR first.
PROGRAM
Press PLAY B during recording.
RECORDINGS
1
7
9
Playback of the title you are recording will start
from the beginning.
CLEAR
+10
MODE
AUDIO
• Elapsed playback time will be displayed in the Front
ZOOM SUB TITLE ANGLE
Panel Display.
MENU
TOP MENU
To stop the playback,press STOP C ONCE.
2
• The Front Panel Display will switch back to show
the elapsed recording time.
ENTER
IMPORTANT: If you press STOP C twice, it will
DISPLAY
RETURN
stop the recording.
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
Simultaneous Playback and
Recording
REC/OTR
PAUSE
A-B
SEARCH REPEAT
DVR
You can record a title on the DVR during a DVD playback.
To do so,simply select the DVD mode for the playback by
pressing DVD during DVR recording,then follow the
normal procedure of playback.
You can also playback a title in the same device (DVR).
To do so,pressTOP MENU during recording and select a
title you like to play,and then press PLAY B.
To playback a title being recorded while continuing to
record,refer to‘Time Shift Playback’ on this page.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Special Playback (Cont’d)
Pause
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
During playback,press PAUSE F.
1
CHANNEL
Playback will pause and sound will be muted.
PROGRAM
RECORDINGS
7
9
F
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Press PLAY B to resume play.
2
MENU
TOP MENU
Step-by-Step Playback
DVR
ENTER
DISPLAY
RETURN
Press DVR first.
SKIP
REV
DVR
DVD
SKIP
FWD
During playback,press PAUSE F.
1
PLAY
STOP
Playback will pause and the sound will be muted.
REC/OTR
PAUSE
A-B
F
SEARCH REPEAT
Press SKIP H or G repeatedly.
2
Every time you press SKIP H or G, the playback
will go backward or forward one frame at a time.
Press PLAY B to resume normal playback.
3
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Special Playback (Cont’d)
Repeat Playback
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
During playback,press DISPLAY twice.
1
CHANNEL
Icons for the available features will appear.
PROGRAM
RECORDINGS
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
7
9
?
NR
CLEAR
+10
MODE
AUDIO
SEARCH
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using
/
,select
icon. Press ENTER.
2
Option window will appear.
ENTER
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
DISPLAY
RETURN
?
NR
Off
SKIP
REV
DVR
DVD
SKIP
FWD
Program
Chapter
PLAY
STOP
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Using
/
,select a desired option for repeat
playback. Press ENTER.
3
The selected repeat playback will start.
Program:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
Note
• To cancel the repeat playback, select “Off” at step 3.
The Repeat Setting will be also cleared when you
stop playback.
• Repeat playback is not available during Time Shift
playback.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Search
Title / Chapter Search
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
Using SKIP H /
G
PROGRAM
During playback,press SKIP G to skip to the next
RECORDINGS
1
chapter.
7
9
CLEAR
+10
MODE
AUDIO
Press SKIP H once to skip back to the beginning
of the current chapter. Press SKIP H twice to
skip back to the previous chapter.
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using DISPLAY
ENTER
During playback,press DISPLAY twice.
1
2
DISPLAY
RETURN
Icons for the available features will appear.
SKIP
REV
DVR
DVD
SKIP
FWD
?
Using
/
,select
icon. Press ENTER.
T
The title number next to
will be highlighted.
PLAY
STOP
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
REC/OTR
PAUSE
A-B
?
NR
SEARCH
SEARCH REPEAT
Title:
Using
/
or the Number Buttons,enter a desired
title number to search. Then,press ENTER.
Title Search will start.
Chapter:
C
Using ,move to the number next to
for chapter.
Using or the Number Buttons,enter a desired
/
chapter number to search. Then,press ENTER.
Chapter Search will start.
Note
• In Search Mode Display, total numbers of each search
contents (title / chapter / time) are shown as a
denominator.
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
?
NR
SEARCH
Current title number /
Total number of titles
Elapsed time of the
current title /
Total time of the
current title
Current chapter number /
Total number of chapters
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Search (Cont’d)
Time Search
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
During playback,press DISPLAY twice.
1
2
Icons for the available features will appear.
PROGRAM
RECORDINGS
?
Using
/
,select
icon. Press ENTER.
7
9
CLEAR
+10
MODE
AUDIO
The number next to
T
will be highlighted.
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
ZOOM SUB TITLE ANGLE
?
NR
MENU
TOP MENU
SEARCH
ENTER
Move the cursor to the elapsed time counter using
Elapsed time counter
.
DISPLAY
RETURN
3
4
SKIP
REV
DVR
DVD
SKIP
FWD
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
PLAY
STOP
?
NR
REC/OTR
PAUSE
A-B
SEARCH
SEARCH REPEAT
Using
/
or the Number Buttons,enter a
desired time to search. Press ENTER.
Time Search will start.
Note
• Time Search is available only within the same title.
• Time Search is available only during playback.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Search (Cont’d)
Series Search
DVR
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
You can search for the group of titles made with the same
PeriodicalTimer Recordings.We refer to such a group of titles
as“series”.
1
4
2
5
8
0
3
6
Press DVR first.
Press TOP MENU.
Title List will appear.
1
PROGRAM
RECORDINGS
7
9
PREVIOUS RECORDINGS
CLEAR
+10
MODE
AUDIO
1
2
APR/01 12:15PM CH12
CH12
1
2
5
3
6
ZOOM SUB TITLE ANGLE
APR/01/06
12:15PM
MAY/01/06
12:15PM
JUN/04/06
10:00AM
4
MENU
TOP MENU
JUN/15/06
11:05AM
JUL/05/06
11:40PM
JUL/18/06
10:00AM
ENTER
DISPLAY
RETURN
Using
/
/
/
,select any title that belongs to
2
3
the series you want to search and press ENTER.
Title List Menu will appear.
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
Play From Start
Resume Play
Protect
REC/OTR
PAUSE
A-B
Delete
SEARCH REPEAT
Search
Using
Series List will appear.
/
, select “Search”.Press ENTER.
Select Series
Mon 10:00AM CH 8
001
002 Mon-Sun 10::00AM CH 8
No Series
1/1
Highlight will be on the series that contains the
selected title.
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Search (Cont’d)
Using
ENTER.
/
,select the desired series.Press
4
5
Title List of the selected series will appear.
PREVIOUS RECORDINGS
1
2
JUL/18 10:00AM CH12
CH12
6
8
9
JUL/18/06
10:00AM
JUL/25/06
10:00AM
AUG/01/06
10:00AM
12
16
20
AUG/08/06
10:00AM
AUG/15/06
10:00AM
AUG/22/06
10:00AM
Using
/
/
/
,select a desired title to play,
then press PLAY B.Or press ENTER to call up the
Title List Menu and select your desired playback style.
To show the regularTitle List,select “DisplayAll
Program” from theTitle List Menu.Then press
ENTER.
1
Select Series
001
Mon 10:00AM CH 8
2
3
002 Mon-Sun 10:00AM CH 8
No Series
1/1
4
1
2
Series List
• Up to 8 series can be displayed on 1 page.
• The series that contains the oldest title comes first on
the list.
Information on the series.
• Type of the Periodical Recording (ex.every Monday),
start time,and the recording channel.(In the example
here,the information tells you this series is recorded
on every Monday,starting at 10:00AM on channel 8.)
No Series
• All recordings which are not periodical fall into this
category.
• “No Series” will always be at the last on the list.
Current page /Total number of pages.
• Up to 38 pages (300 series) are available.
3
4
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Selecting a Format ofAudio andVideo
Audio Status
DVR
TIMER
POWER
OPEN/CLOSE
PROG.
SET UP
This feature allows you to check the current audio status.
It only affects during the playback of DVR.
1
4
2
5
8
0
3
6
CHANNEL
Press DVR first.
PROGRAM
RECORDINGS
During playback,press DISPLAY twice.
7
9
1
Icons for the available features will appear.
CLEAR
+10
MODE
AUDIO
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
ZOOM SUB TITLE ANGLE
?
NR
SEARCH
MENU
TOP MENU
ENTER
Using
/
,select
and press ENTER.
2
DISPLAY
RETURN
Current audio status will appear.
SKIP
REV
DVR
DVD
SKIP
FWD
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
?
NR
PLAY
STOP
REC/OTR
PAUSE
A-B
1. Dolby Digital 2 ch
SEARCH REPEAT
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Playback)
Selecting a Format ofAudio andVideo (Cont’d)
Visual Noise Reduction
DVR
TIMER
POWER
OPEN/CLOSE
PROG.
SET UP
This feature allows you to reduce visual noise during playback.
Press DVR first.
1
4
2
5
8
0
3
6
CHANNEL
During playback,press DISPLAY twice.
1
Icons for the available features will appear.
PROGRAM
RECORDINGS
7
9
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
CLEAR
+10
MODE
AUDIO
?
NR
SEARCH
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
NR
Using
/
,select
icon. Press ENTER.
2
ENTER
Option window will appear.
DISPLAY
RETURN
DVR MODE
T
1 / 1
C
1 / 1 0:00:04/ 1:30:00
?
NR
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
Off
Type1
Type2
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Off
: No effect.
Type1 : Reduces the visual noise of the playback
image.
Type2 : Same as type 1, only more effective.
Using
/
,select a desired option. Press ENTER.
3
Your setting is now activated.
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Editing)
DeletingTitles
Deleting SelectedTitles
DVR
TIMER
PROG.
You can delete titles which you do not need anymore.
Be advised that the titles once deleted cannot be recovered.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVR first.
1
4
2
5
8
0
3
6
Press TOP MENU.
Title List will appear.
1
PROGRAM
RECORDINGS
7
9
PREVIOUS RECORDINGS
CLEAR
+10
MODE
AUDIO
1
2
APR/01 12:15PM CH12
CH12
1
2
5
3
6
ZOOM SUB TITLE ANGLE
APR/01/06
12:15PM
MAY/01/06
12:15PM
JUN/04/06
10:00AM
MENU
TOP MENU
4
JUN/15/06
11:05AM
JUL/05/06
11:40PM
JUL/18/06
10:00AM
ENTER
DISPLAY
RETURN
Using
Press ENTER.
Title List Menu will appear.
/
/
/
,select a desired title to delete.
2
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
PREVIOUS RECORDINGS
1
2
JUN/04 10:00AM CH12
CH12
REC/OTR
PAUSE
A-B
1
4
2
3
6
Play From Start
Resume Play
SEARCH REPEAT
APR/01/06
12:15PM
JUN/04/06
10:00AM
Protect
Delete
Search
JUN/15/06
11:05AM
JUL/05/05
11:40PM
JUL/18/06
10:00AM
Using
/
,select “Delete”.Press ENTER.
3
Confirmation window will appear.
PREVIOUS RECORDINGS
1
2
APR/01 12:15PM CH12
CH12
1
2
3
6
Play From Start
APR/01/06
12:15PM
Delete
Yes
th
i
s
p
r
ogram?
JUN/04/06
10:00AM
Search
No
4
JUN/15/06
11:05AM
JUL/05/05
11:40PM
JUL/18/06
10:00AM
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Editing)
DeletingTitles (Cont’d)
Deleting allTitles in DVR
Using
/
,select “Yes”.Press ENTER.
4
Final confirmation window will appear.
DVR
PREVIOUS RECORDINGS
Press DVR first.
1
2
APR/01 12:15PM CH12
CH12
1
2
3
6
Press SET UP.
Play From Start
1
APR/01/06
12:15PM
JUN/04/06
10:00AM
Advanced Menu
Are you sure?
No
Yes
4
Erase All in DVR
DVR Menu
Search
JUN/15/06
11:05AM
JUL/05/05
11:40PM
JUL/18/06
10:00AM
Initial Setup
Timer Program
Easy Setting Menu
Using
/
,select “Yes”.Press ENTER.
5
6
The selected title is now deleted.
PREVIOUS RECORDINGS
1
2
JUN/15 11:05AM CH12
CH12
Using
Press ENTER.
/
,select “DVR Menu”.
2
1
2
5
3
6
Advanced Menu
APR/01/06
12:15PM
MAY/01/06
12:15PM
JUN/15/06
11:05AM
Erase All in DVR
4
DVR Menu
Initial Setup
JUL/05/06
11:40PM
JUL/18/06
10:00AM
JUN/20/06
11:30AM
Timer Program
Easy Setting Menu
Press TOP MENU to exit.
Press ENTER again.
Note
3
4
5
Confirmation window will appear.
• Deleting titles will increase the recordable DVR
space.
Delete all programs?
Yes
No
Using
/
,select “Yes”.Press ENTER.
Final confirmation window will appear.
Are you sure?
Yes
No
Using
/
,select “Yes”. Press ENTER.
All titles are erased.
Note
• Protected title will not be deleted, even if you
select “Erase All in DVR”.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Editing)
Protecting / Undo ProtectingTitles
DVR
To prevent accidental title erasing,you can protect the
contents in theTitle List.
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press DVR first.
PressTOP MENU.
1
4
2
5
8
0
3
6
1
CHANNEL
Title List will appear.
PREVIOUS RECORDINGS
PROGRAM
RECORDINGS
1
2
APR/01 12:15PM CH12
CH12
7
9
1
2
5
3
6
CLEAR
+10
MODE
AUDIO
APR/01/06
12:15PM
MAY/01/06
12:15PM
JUN/04/06
10:00AM
ZOOM SUB TITLE ANGLE
4
JUN/15/06
11:05AM
JUL/05/06
11:40PM
JUL/18/06
10:00AM
MENU
TOP MENU
ENTER
Using
Press ENTER.
/
/
/
,select a desired title to protect.
2
DISPLAY
RETURN
Title List Menu will appear.
SKIP
REV
DVR
DVD
SKIP
FWD
PREVIOUS RECORDINGS
JUN/04 10:00AM CH12
1
2
CH12
PLAY
STOP
1
2
3
6
Play From Start
Resume Play
Protect
REC/OTR
PAUSE
A-B
APR/01/06
12:15PM
JUN/04/06
10:00AM
4
Delete
Search
SEARCH REPEAT
JUN/15/06
11:05AM
JUL/05/05
11:40PM
JUL/18/06
10:00AM
Using
/
,select “Protect”.Press ENTER.
3
4
The key icon will appear at the upper left corner of
the thumbnail.
If the title has already been protected
“Undo Protect” will be listed in the Title List
Menu instead of “Protect”.To cancel the
protection, select “Undo Protect” and press
ENTER.The key icon will disappear.
PressTOP MENU to exit.
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Other Setups)
Tour of the Setup Menus
The following table shows the items which you can change the setting and their default settings. Refer to the following table
for your convenience.
Setting menu
OSD Language
Items
Page 19
Selection (highlight is the default) Contents
English
Set the language for OSD (On Screen Display).
Français
Español
Clock Setting
Manual Clock Setting
Auto Clock Setting
Pages 22-23
Page 23
Off
Auto
Manual
On
Daylight SavingTime
Page 24
Off
Channel Setting
Playback
Auto Preset
Manual Preset
TVAudio Select
Page 25
Pages 20-21
Page 21
Stereo
SAP
TVAspect
4 :3 Letter Box
4 :3 Pan & Scan
16 :9Wide
Dolby Digital
PCM
Page 53
Audio Out
Page 53
Set the type of sound signal output from the
digital audio output jack.
Stream
Record
Auto Chapter
Page 54
Off
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Reset to Factory Default
Page 55
Note
• If you change the settings in the Setup Menus, the information of the contents remain memorized even after the
power is turned off.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Other Setups)
Playback Setting
Press DVR first.
TIMER
PROG.
Press SET UP.
POWER
OPEN/CLOSE
CHANNEL
SET UP
1
“Easy Setting Menu” or “Advanced Menu” will appear.
If “Advanced Menu” is displayed, proceed to step 3.
1
4
2
5
8
0
3
6
Easy Setting Menu
Erase All in DVR
DVR Menu
PROGRAM
RECORDINGS
Initial Setup
Timer Program
Advanced Menu
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using
Press ENTER.
/
,select “Advanced Menu”.
2
3
ENTER
Using
Press ENTER.
/
,select “Initial Setup”.
DISPLAY
RETURN
Advanced Menu
SKIP
REV
DVR
DVD
SKIP
FWD
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
PLAY
STOP
REC/OTR
PAUSE
A-B
Timer Program
Easy Setting Menu
Record
SEARCH REPEAT
Reset to factory default
Using
/
,select “Playback”. Press ENTER.
4
Playback Menu will appear.
Advanced Menu
OSD Language
DVR Menu
Clock Setting
Playback el Setting
Initial Setup
TV Aspect
Timer ProgrAudioOut ck
Record
Easy Setting Menu
Reset to factory default
Using
Press ENTER.
/
,select a desired item to set.
5
Menu or option window will appear.
Referring to the page 53,set the
selected item.
6
7
When you finish with the setting, press SET UP to exit.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Other Setups)
Playback Setting (Cont’d)
TVAspect
You can select theTV aspect ratio to match the formats of
what you are playing back on the unit and yourTV screen
(4:3 standard or 16:9 widescreenTV).
Audio Out
You can set the digital audio output.
(Follow steps 1 to 4 on page 52.)
Using
/
, select “Audio Out”.
(Follow steps 1 to 4 on page 52.)
Press ENTER.
Menu window will appear.
Using
/
, select “TV Aspect”.
Press ENTER.
Menu window will appear.
Audio Out
Dolby Digital
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
• Using
Press ENTER.
/
,select a desired item to set.
Menu or Option window will appear.
Referring to the explanations below,set the selected item.
• Using
Press ENTER.
/
,select a desired setting.
Your setting is now activated.
Dolby Digital (Default:Stream)
Dolby Digital
4:3 Letter Box:
Stream
PCM
For full-length picture with black bars on
the top and bottom of the screen
• Using
Press ENTER.
Your setting is now activated.
/
,select a desired setting.
4:3 Pan & Scan:
For a full-height picture with both sides
trimmed
16:9Wide:
PCM:
Convert the Dolby Digital into “PCM”
(2 channel).
For a widescreenTV
When your amplifier / decoder is NOT
compatible with Dolby Digital,set to PCM.
Stream: Outputs Dolby Digital signals.
When your amplifier / decoder is
compatible with Dolby Digital,set to
“Stream”.
Note
• If the audio on DVR is recorded in Dolby Digital
format, set Dolby Digital to PCM so that you can
switch to main audio (L), sub audio (R), or a mix of
both (L / R) with your amplifier / decoder.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Other Setups)
Recording Setting (Auto Chapter)
You can sort out the recording by inserting chapter marks
every set time interval.
Press DVR first.
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press SET UP.
1
“Easy Setting Menu” or “Advanced Menu” will appear.
If “Advanced Menu” is displayed,proceed to step 3.
1
4
2
5
8
0
3
6
Easy Setting Menu
CHANNEL
Erase All in DVR
DVR Menu
PROGRAM
RECORDINGS
Initial Setup
Timer Program
Advanced Menu
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using
Press ENTER.
/
,select “Advanced Menu”.
2
3
ENTER
Using ,select “Initial Setup”.Press ENTER.
/
DISPLAY
RETURN
Advanced Menu
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
Timer Program
Easy Setting Menu
Record
REC/OTR
PAUSE
A-B
Reset to factory default
SEARCH REPEAT
Using
/
,select “Record”. Press ENTER.
4
5
Record Menu will appear.
Advanced Menu
OSD Language
Clock Setting
DVR Menu
Initial Setup
ReCcohrdannel Setting
Auto Chapter
ck
Timer Program
Record
Easy Setting Menu
Reset to factory default
Press ENTER again
Option window will appear.
.
Auto Chapter
Off
5 minutes
10 minutes
Display
15 minutes
30 minutes
60 minutes
Using
Press ENTER.
/
,select desired time option.
6
7
Your setting is now activated.
• The default setting is “10 minutes”.
Note
Press SET UP to exit.
• Depending the recording time, a chapter with no
image may be created at the end.
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVR (Other Setups)
Reset to Factory Default
Resets the settings to the factory default (refer to the
‘Note’ on this page for the exceptions).
Press DVR first.
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press SET UP.
1
“Easy Setting Menu” or “Advanced Menu” will appear.
1
4
2
5
8
0
3
6
If “Advanced Menu” is displayed, proceed to step 3.
CHANNEL
Easy Setting Menu
Erase All in DVR
DVR Menu
PROGRAM
RECORDINGS
7
9
Initial Setup
Timer Program
Advanced Menu
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using
Press ENTER.
/
,select “Advanced Menu”.
2
3
ENTER
DISPLAY
RETURN
Using
Press ENTER.
/
,select “Initial Setup”.
SKIP
REV
DVR
DVD
SKIP
FWD
Advanced Menu
PLAY
STOP
OSD Language
Clock Setting
Channel Setting
Playback
DVR Menu
Initial Setup
REC/OTR
PAUSE
A-B
Timer Program
Easy Setting Menu
SEARCH REPEAT
Record
Reset to factory default
Using
Press ENTER.
/
,select “Reset to factory default”.
4
5
Confirmation window will appear.
Reset to factory default OK?
Yes
No
Using
/
,select “Yes”. Press ENTER.
Final confirmation window will appear.
Are you sure?
Yes
No
Using
/
,select “Yes”. Press ENTER.
6
7
All setting are now reset to the factory default.
Note
Press SET UP to exit.
• The settings listed below will remain unchanged
even after resetting to the factory default.
- OSD Language Setting
- Channel Setting
- Clock Setting
- DVR Timer Programs
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
About the Discs
Playable Discs
Recorded
signals
Playable
discs
Disc size
Region code
Disc types
Mark (logo)
DVD-Video
or
* 1, 2, 4, 6, 10
5 inch
(12 cm)
or
3 inch
(8 cm)
DVD-RW
DVD-R
Example
Title 1
Title 2
Digital video
(MPEG2)
-
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
* 1, 3, 4, 5,
6, 7, 9, 10
DVD+RW
DVD+R
-
-
* 1, 3, 4, 5,
6, 8, 9, 10
Audio CD
MP3/WMA
Audio CD
* 4, 6, 10
Example
Digital audio
5 inch
(12 cm)
or
3 inch
(8 cm)
Track 1
Track 2
Track 5
Track 6
Track 3
Track 4
CD-RW
CD-R
* 4, 5, 6,
9, 10
Digital audio
or
MP3/
WMA *11
Example
-
Group 1
Group 2
Track 1
Track 3
Track 2
Track 4
Track 5
Track 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played
back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in theVR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or
special properties of discs.
*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them
back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-RW/R disc recorded in the video format on our brand’s DVD recorder. However,
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying
the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back
at all or normally (the picture or sound may not be smooth, etc.).
*9: If there is too much recording space left on a disc (less than 2 3/16 inches (55 mm) across), it may not play back
properly.
*10: Do not glue paper or put stickers on to the disc.These may damage the disc and the unit may not read it correctly.
*11:This unit cannot playback the disc contents protected by Windows Media Digital Rights Management (DRM).
Unplayable Discs
• NEVER play back the following discs.Otherwise,malfunction may result!
DVD-RAM / CD-i / Photo CD /Video CD / DVD with region codes other than 1 or ALL
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
• On the following disc,the sound MAY NOT be heard.
Super Audio CD / DVD-Audio
NOTE: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
• Any other discs without compatibility indications
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Playback
Basic Playback
MP3
DVD
CD
WMA
TIMER
PROG.
Before:Turn on the TV, this unit, the amplifier and
any other equipment which are connected to this
unit. Make sure the TV is set to the correct channel.
POWER
OPEN/CLOSE
CHANNEL
SET UP
1
4
2
5
8
0
3
6
Press DVD first.
Press OPEN / CLOSE A.
1
PROGRAM
RECORDINGS
The disc tray will open.
7
9
CLEAR
+10
MODE
AUDIO
Insert your disc with its label facing up. Align the disc
to the disc tray guide.
2
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
ENTER
disc
tray
DISPLAY
RETURN
guide
SKIP
REV
DVR
DVD
SKIP
FWD
Press OPEN / CLOSE A to close the disc tray.
PLAY
STOP
3
This operation may take a
while to be recognized.
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Press PLAY B .
4
Playback will start.
Press STOP C to stop playback.
5
To eject the disc,press OPEN / CLOSE A to open the
disc tray,then remove the disc before turning off the unit.
Note
General Features
DVD may contain menus to navigate the disc and access
special features.Press the appropriate Numeric buttons or
• For playing back an MP3/WMA file, see page 64.
• A “prohibited icon” may appear at the top-right on
the TV screen when the operation is
use
/
/
/
to highlight your selection in the DVD
prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3 due
to specific programs.
main menu and press ENTER to confirm.
• During the playback of a two-layered disc, pictures
may stop for a moment.This happens while the 1st
layer is being switched to the 2nd layer.This is not a
malfunction.
TIP:
You can change the On-Screen language in “PLAYER
MENU” setting. (Refer to pages 79, 80.)
• Don't leave the disc exiting halfway from the slot.
Tracking will be automatically adjusted upon playback.
• The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
• When you play back a DVD with a title menu
recorded, it may appear on the screen. In this case,
refer to “Title Menus” on page 58.
Menu operations may vary depending on
the disc.Refer to the manual accompanying
the disc for more details.
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Playback (Cont’d)
Disc Menus
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVD first.
1
4
2
5
8
0
3
6
Press MENU.
1
•The DVD menu will appear.
PROGRAM
RECORDINGS
If the feature is not available,
on theTV screen.
symbol may appear
7
9
2
3
CLEAR
+10
MODE
AUDIO
If disc menu is available on the disc,audio language,
subtitle options,chapters for the title and other
options will appear for selection.
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Press
/
/
/
to select an item,and the
4
ENTER button to confirm selection.
ENTER
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
Title Menus
DVD
SEARCH REPEAT
Press DVD first.
Press TOP MENU.
1
•The title menu will appear.
If the feature is not available,
on theTV screen.
symbol may appear
2
3
Press
ENTER to confirm selection.
• Playback will begin at the selected title.
/
/
/
to select an item,and the
Note
• Contents of menus and corresponding menu
operations may vary between discs.
Refer to the manual accompanying the disc for
details.
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Playback (Cont’d)
Resume Playback
MP3
DVD
CD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
You can resume playback from where you stopped last time.
1
4
2
5
8
0
3
6
Press DVD first.
During playback,press STOP C.
1
PROGRAM
RECORDINGS
Resume message will appear.
Example: DVD and CD
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Resume ON
MENU
TOP MENU
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
ENTER
DISPLAY
RETURN
• Pressing STOP C twice will cancel the Resume
function.
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
Press PLAY B.
2
Within a few seconds, playback will resume from the
point at which it stopped last. Resume function
stays in effect even if you turn off the power.
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Note
• For MP3/WMA, playback will resume from the
beginning of the track at which playback was
stopped.
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Playback (Cont’d)
Pause
MP3
DVD
CD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVD first.
1
4
2
5
8
0
3
6
During playback,press PAUSE F.
1
Playback will pause and sound will be muted.
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Press PLAY B to resume play.
2
MENU
TOP MENU
Step-by-Step Playback
DVD
ENTER
DISPLAY
RETURN
Press DVD first.
SKIP
REV
DVR
DVD
SKIP
FWD
The disc goes forward by one frame each time
PAUSE F is pressed in the pause mode.
To continue playback,press PLAY B.
1
PLAY
STOP
REC/OTR
PAUSE
A-B
The sound will be muted.
SEARCH REPEAT
Note
• On DVDs, set “STILL MODE” to “FIELD” in the
Display menu if pictures in the pause mode are
blurred. (Refer to page 81.)
• During paused and step-by-step playback, sound will
be muted.
• Playback will be paused and sound will be muted.
60 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Playback
Fast Forward / Fast Reverse
MP3
DVD
CD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVD first.
1
4
2
5
8
0
3
6
During playback,press FWD D or REV E.
1
Every time you press FWD D or REV E,
approximate speed will change as follows.
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
press button
: +1
: -1
-5
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
ZOOM SUB TITLE ANGLE
speed
(DVD)
Normal
speed
x100 x50 x20
x8
x8
x8
x2
x2
x2
x8
x8
x8
x20 x50 x100
speed
(CD)
Normal
speed
MENU
TOP MENU
- -
- -
x30
x2
x2
x30
- -
- -
speed
(MP3,WMA)
Normal
speed
x30
x2
x30
OSD
indication
ENTER
E
E
E
E
E
N/A
D
D
D
D
D
5
4
3
2
1
1
2
3
4
5
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
Press PLAY B to continue playback.
2
PLAY
STOP
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Note
• For DVDs, fast forward or reverse search speed is
different depending on the disc.
• If you are using H/E , D/G on the front panel,
press and hold it for than 2 sec (the longer you hold
it, the faster the speed will be).When you reach the
desired speed, release the button.
• On DVDs, set “STILL MODE” to “FIELD” in the
DISPLAY menu if pictures during fast forward and
reverse search are blurred. (Refer to page 81.)
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Playback (Cont’d)
Slow Forward / Slow Reverse
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press DVD first.
During playback,press PAUSE k.
1
4
2
5
8
0
3
6
1
2
CHANNEL
Press FWD D or REV E.
PROGRAM
RECORDINGS
Every time you press FWD D or REV E,
approximate speed will change as follows.
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
press button
-3
x1/2
3
-2
x1/8
2
-1
x1/16
1
0
+1
x1/16
1
+2
x1/8
2
+3
x1/2
3
: +1
: -1
MENU
TOP MENU
speed
(DVD)
Normal
speed
OSD
indication
N/A
ENTER
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
Press PLAY B to continue playback.
2
PLAY
STOP
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Note
• Slow forward or reverse speed is different, depending
on the disc.
• Set “STILL MODE” to “FIELD” in the Display menu if
pictures in the slow playback mode are blurred.
(Refer to page 81.)
• If you are using H/E , D/G on the front panel,
press and hold it for than 2 sec(the longer you hold
it, the slower the speed will be).When you reach the
desired speed, release the button.
62 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Playback (Cont’d)
Zoom
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Press DVD first.
1
4
2
5
8
0
3
6
During playback,press ZOOM.
CHANNEL
1
2
Icons for the available features will appear.
PROGRAM
RECORDINGS
7
9
Press ZOOM repeatedly to select the required zoom
factor:x2,x4 or OFF.
CLEAR
+10
MODE
AUDIO
Option window will appear.
ZOOM SUB TITLE ANGLE
x2
x4
MENU
TOP MENU
ENTER
Using
the screen.
/
/
/
,slide the zoomed picture across
3
4
DISPLAY
RETURN
During zoomed playback,the position guide box
appears at the bottom-right on theTV screen.The
position of the blue box inside the blue box indicates
the position of the zoomed image within the overall
picture.To remove the box or show it,press ENTER.
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
To exit zoom mode,press ZOOM repeatedly to
select OFF.
SEARCH REPEAT
Note
• Zooming function does not work while the disc
menu is showing up.
• x4 zoom is not available on some discs.
• It may take several seconds to slide the zoomed
picture.
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Playback (Cont’d)
Playing back MP3 /WMA Discs
TIMER
PROG.
MP3
WMA
POWER
OPEN/CLOSE
SET UP
MP3/WMA are methods of compressing files.You can copy
MP3/WMA files on CD-RW/Rs from the computer and play
the files on this unit.
1
4
2
5
8
0
3
6
CHANNEL
Press DVD first.
PROGRAM
RECORDINGS
7
9
Insert an MP3/WMA-format disc,then press
MENU to call up the MP3 /WMA List.
1
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
FILE LIST
DISC NAME
FOLDER
MP3
3
WMA
folder name 1
folder name 2
folder name 3
folder name 4
MENU
TOP MENU
3
file name 1
3
file name 2
file name 3
ENTER
PLAY
1/
2
ENTER
folder name 1
DISPLAY
RETURN
• To exit the menu, press MENU again.
SKIP
REV
DVR
DVD
SKIP
FWD
Using
/
to select a desired folder (group) or
PLAY
STOP
2
track. Press ENTER or PLAY B.
REC/OTR
PAUSE
A-B
When a track is selected:
Playback will start.
SEARCH REPEAT
When a folder is selected:
The files and the folders will appear.
Using
(except for the top hierarchy).
Using to select a track or a folder you want,then
/
to go to the next or previous hierarchy
/
press ENTER.
Hints for MP3 /WMA files:
• Some selections may take a while to be recognized.
• Press TOP MENU to return to the first item.
• Folders are known as Groups;files are known asTracks.
3
• MP3 files are accompanied by icon.
•WMA files are accompanied by icon.
• Folders are accompanied by icon.
•A maximum of 255 folders can be recognized.
•A maximum of 999 files can be recognized.
• Up to 8 hierarchies can be created.This unit
recommends the files recorded under the following
circumstances:
• Sampling frequency:44.1kHz or 48kHz (MP3/WMA)
• Constant bit rate:32kbps ~ 320kbps (MP3) 48kbps ~
192kbps (WMA)
• For MP3/WMA file recorded inVariable Bit Rate(VBR),
the unit may not display the actual elapsed time.
Note
• The audio source of MP3 / WMA files cannot be
recorded as digital sound by an MD or DAT deck.
• Files that bear an extension other than .mp3 or .wma
(MP3 / WMA) will not appear in the MP3 / WMA
Menu.
•
Copyright protectedWMA files will not play on this unit.
•The name of group and track can be displayed in up to 25
characters.Unrecognizable characters will be replaced
with asterisks.The ninth and deeper hierarchies cannot
be displayed.
• Some unplayable folders or tracks may appear in the
MP3 / WMA Menu depending on their recording
status.
• Unplayable groups and tracks may be displayed depending
on the recording conditions.
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Search
Track Search
CD
MP3
TIMER
PROG.
WMA
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVD first.
Using SKIP H / G
1
4
2
5
8
0
3
6
During playback,press SKIP i to skip to the
next track.
1
PROGRAM
RECORDINGS
Press SKIP j once to skip back to the beginning
of the current track.
7
9
CLEAR
+10
MODE
AUDIO
Press SKIP j twice to skip back to the previous track.
ZOOM SUB TITLE ANGLE
Current Track
(TR)
MENU
TOP MENU
TR 1 TR 2 TR 3 TR 4
SKIP
SKIP
ENTER
Using SEARCH
DISPLAY
RETURN
During playback,press SEARCH.
1
SKIP
REV
DVR
DVD
SKIP
FWD
Option window will appear.
PLAY
STOP
/29
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Select track number by using the Number Buttons
within 30 seconds.
2
Track Search will start.
• Press CLEAR to erase the incorrect input.
•
+10 is also available for discs with more than 9 tracks.
Note
•
Track number will appear briefly on the front panel display.
• If SKIP H / G are pressed while the playback is
paused, the playback will be paused again after
skipping to the next track.
•
SKIP H / G are not available when playback is stopped.
• Track Search is not available on some discs.
• For CDs and MP3/WMA,Track Search is not available
during Programmed or Random Playback.
• For discs with less than 10 tracks, press the track
number directly.
•
•
•
For discs with more than 9 and less than 100 tracks (total
track number is 2 digit), to play a single digit track press 0
first.Then enter the track number. (e.g. for track 3, press
0, 3).To play a double-digit track, press the track number.
For discs with more than 99 tracks, to play a single or a
double-digit track, press 0 first, then the track number(e.g.
for track 3, press 0, 0, 3, and for track 26, press 0, 2, 6).To
play a triple-digit track, press the track number.
+10 can also bring theTrack Search display, except for the disc
with less than 10 tracks. For such a disc, track search can be
done by just pressing the track number.
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Search (Cont’d)
Title / Chapter Search
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
Press DVD first.
Using SKIP H /
G
1
4
2
5
8
0
3
6
During playback,press SKIP G to skip to the next
title or chapter.
1
PROGRAM
Press SKIP H once to skip back to the beginning
of the current title or chapter.
Press SKIP H twice to skip back to the previous
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
title or chapter.
ZOOM SUB TITLE ANGLE
Current Chapter
(CH)
MENU
TOP MENU
CH 1 CH 2 CH 3 CH 4
SKIP
SKIP
SKIP
or
ENTER
Current Title
(TT)
DISPLAY
RETURN
TT 1 TT2 TT3 TT4
SKIP
REV
DVR
DVD
SKIP
FWD
SKIP
PLAY
STOP
(If the disc has only 1 chapter)
REC/OTR
PAUSE
A-B
Using SEARCH
SEARCH REPEAT
During playback,press SEARCH repeatedly until the
Title / Chapter Search display appears.
1
2
/12
Enter the desired title / chapter number by using the
Number Buttons within 30 seconds.
Title Search and Chapter Search will start.
• Press CLEAR to erase the incorrect input.
Note
• Depending on the disc being played, this function can
also be performed by directly entering the desired
chapter number with the Number buttons. Refer
to the manual accompanying the disc.
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Search (Cont’d)
Time Search
CD
DVD
Press DVD first.
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
During playback,press SEARCH repeatedly until the
Time Search display appears.
1
1
4
2
5
8
0
3
6
TOTAL
1:29:00
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Select a desired disc time by using the Number
Buttons within 30 seconds.
2
MENU
TOP MENU
Time Search will start.
• Press CLEAR to erase the incorrect input.
ENTER
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Note
• When there is no need to enter a number,“0”
appears automatically.
For example,“0 : 0 _ : _ _” appears in the Time
Search display if the total time of the title or track is
less than 10 minutes.
• Time Search is not available on some discs.
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Search (Cont’d)
Marker Setup
CD
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
This feature allows you to assign a specific point on a
disc to be called back later.
Press DVD first.
1
4
2
5
8
0
3
6
During playback,press SEARCH repeatedly until the
marker display appears.
1
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Using
/
,select a desired marker number.
2
3
When it reaches the desired point,press ENTER.
ENTER
The title (track) number and the time will appear.
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
To return to the marker later:
• Playback will restart from the specific point which
you set.
SEARCH REPEAT
To exit the marker menu,press RETURN
.
Note
• The Marker display will disappear in about 30
seconds when there is no output.
• To clear a marker, select the marker to be cleared at
step 2, and then press CLEAR.
• Removing the disc or turning off the power will erase
all markers.
• Selecting “AC” at step 2 will also erase all markers.
• You can mark up to 10 points.
• Marker Setup is not available on some discs.
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Repeat / Random / Programmed Playback
Repeat Playback
CD
MP3
DVD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Repeat function is available only during playback.
Press DVD first.
1
4
2
5
8
0
3
6
During playback,press REPEAT.
CHANNEL
1
Option window will appear.
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Each time you press REPEAT, repeat function
changes as example below.
MENU
TOP MENU
Hints for DVD Repeat:
• Repeat Chapter /Title is not available with some scenes.
• Repeat Playback does not function during repeatA-B
playback.
• The Repeat Chapter /Title setting will be cleared when
moving to other title or chapter.
ENTER
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
Example: DVD
PLAY
STOP
(repeat off)
OFF
REC/OTR
PAUSE
A-B
(current chapter repeat)
(current title repeat)
CHAPTER
TITLE
SEARCH REPEAT
Hints for CD Repeat:
• Repeat playback does not function during repeatA-B
playback.
• The RepeatTrack setting will be cleared when moving to
other track.
Example: CD
(repeat off)
OFF
(current track repeat)
(entire disc repeat)
TRACK
ALL
Hints for MP3 andWMA Repeat:
• Repeat setting will be cleared when moving to another
track or group.
• Repeat playback may not function with some discs.
Example: MP3,WMA
(repeat off)
OFF
(current track repeat)
(current group repeat)
(entire disc repeat)
TRACK
GROUP
ALL
Note
• Repeat setting will be cleared when moving to
another title, chapter, track or group.
• Repeat playback may not function with some discs or
during repeat A-B playback.
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Repeat / Random / Programmed Playback (Cont’d)
RepeatA-B Playback
TIMER
DVD
CD
POWER
OPEN/CLOSE
PROG.
SET UP
The part between the pointA and B will be played back
repeatedly.
1
4
2
5
8
0
3
6
Press DVD first.
CHANNEL
Play back the title up to the point where you want to
set point “A”.Then,press A-B.
PROGRAM
1
RECORDINGS
7
9
Option window will appear.
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
A-
MENU
TOP MENU
ENTER
Play back the title up to the point where you want to
set point “B”.Then,press A-B.
2
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
A-B
PLAY
STOP
REC/OTR
PAUSE
A-B
TheA-B Repeat Playback is now activated.
SEARCH REPEAT
Note
• To exit the sequence, press A-B so that “ OFF”
appears.
• To cancel Point A, press CLEAR at step 1.
• This function does not work in the other repeat
modes.
• The Repeat A-B section can only be set within the
current title (for DVDs), or the current track (Audio
CDs).
• Repeat A-B is not available with some scenes in DVD.
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Repeat / Random / Programmed Playback (Cont’d)
Random Playback
MP3
CD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
This function shuffles the playing order of tracks instead of
playback in the sequence.
1
4
2
5
8
0
3
6
Press DVD first.
CHANNEL
In stop mode,press MODE repeatedly until Random
Screen appears.
1
PROGRAM
RECORDINGS
7
9
Example: CD
CLEAR
+10
MODE
AUDIO
RANDOM
ZOOM SUB TITLE ANGLE
CD-DA
TOTAL 0:45:55
MENU
TOP MENU
RANDOM PROGRAM
--no indication--
PLAY
ENTER
DISPLAY
RETURN
Press PLAY B.
2
SKIP
REV
DVR
DVD
SKIP
FWD
Random Playback will start.
PLAY
STOP
B
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Note
• To repeat the current track in the random selections,
press REPEAT repeatedly until“ TRACK” appears
during playback.
• To repeat the entire random selections,press
REPEAT repeatedly until“ ALL” appears during
playback.
• You cannot go back to the previous track during
Random Playback.
EN 71
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Repeat / Random / Programmed Playback (Cont’d)
Programmed Playback
MP3
CD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
You may determine the order in which tracks will play.
Press DVD first.
1
4
2
5
8
0
3
6
In stop mode,press MODE.
Program screen will appear.
1
CHANNEL
Example: CD
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
CD-DA
TOTAL 0:00:00
ZOOM SUB TITLE ANGLE
ENTER
MENU
TOP MENU
ENTER
Using
/
,enter a desired track. Press ENTER.
DISPLAY
RETURN
2
SKIP
REV
DVR
DVD
SKIP
FWD
TOTAL 1:03:30
1
5
3:30
5:10
PLAY
STOP
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
REC/OTR
PAUSE
A-B
1/4
SEARCH REPEAT
• Up to 99 tracks can be programmed.
• If eight or more racks are in the program, use
SKIP H, SKIP G to see all the tracks.
• If a folder is selected:
Press to go to the next hierarchy.
Press to go back to the previous hierarchy
(except when you are already in the top
hierarchy).
Note
• Press CLEAR at step 2 to erase the most recently
entered track.
• To erase all programmed tracks at once, select “ALL
CLEAR’’ and press ENTER at step 2.
Press PLAY B.
3
Program Playback will start.
• While a program is being played back, STOP
C
works as follows;
• Press STOP C and PLAY B next, so that the
programmed playback restarts. (CD playback restarts
from the current point. MP3/WMA playback restarts
from the beginning of the current track.)
• Press STOP C twice and PLAY B next, so that
playback restarts from the first track in the original
order. However, your programmed playback can be
restarted when you follow the above steps. (Your
programs are still stored until either the disc is
removed or power is turned off.)
• To repeat the current track in the program, press
REPEAT repeatedly until “ TRACK’’ appears
during playback.
• To repeat the entire program, press REPEAT
repeatedly until “ ALL’’ appears during playback.
72 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Settings
Subtitle Language
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
This unit allows you to select a subtitle language (if available)
during DVD playback.
Press DVD first.
1
4
2
5
8
0
3
6
During playback,press SUBTITLE.
1
PROGRAM
Option window will appear.
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
OFF
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Each time you press SUBTITLE, subtitle language
changes as example below.
ENTER
(no subtitles)
OFF
DISPLAY
RETURN
(English subtitles)
ENG
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
(French subtitles)
FRE
REC/OTR
PAUSE
A-B
To set subtitle ON/OFF
SEARCH REPEAT
DVD
During playback,press SUBTITLE,and then
.
/
1
OFF
Note
• If your language is not shown after pressing
SUBTITLE several times, the disc may not have that
language. However, some discs allow audio subtitle
language setting on the disc menu. (Operation varies
depending on the disc, so refer to the manual along
with the disc.)
• When “NOT AVAILABLE” appears on the TV screen,
it means no subtitle is recorded on the scene.
• If you choose a language that has a three-letter-
language code, the code will be displayed every time
you change the subtitle language setting. If you
choose any other languages,‘---’ will be displayed
instead. (Refer to page 92.)
• Some discs will only allow you to change the subtitle
from the disc menu. Refer to the manual
accompanying the discs for details.
EN 73
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Settings (Cont’d)
Audio Language
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
This unit allows you to select an audio language (if multiple
languages are available on disc) during DVD playback.
Press DVD first.
1
4
2
5
8
0
3
6
CHANNEL
During playback,pressAUDIO.
1
PROGRAM
Option window will appear.
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
1.ENG Dolby D 3/2.1ch 48k/3
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Each time you press AUDIO, audio language
changes as example below.
ENTER
(English audio)
(Spanish audio)
ENG
SPA
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
(French audio)
FRE
REC/OTR
PAUSE
A-B
SEARCH REPEAT
Note
• Some discs will only allow you to change the audio
setting from the disc menu. Refer to the manual
accompanying the discs for details.
• If your language is not shown after pressing AUDIO
several times, the disc may not have that language.
However, some discs allow you to change audio
language setting in the disc menu. (Operation varies
with the disc, so refer to the manual included in the
disc.)
• If you choose a language that has a three-letter-
language code, the code will be displayed every time
you change the subtitle language setting. If you
choose any other languages,‘---’ will be displayed
instead. (Refer to page 92.)
74 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Settings (Cont’d)
CameraAngles
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Some DVD discs may contain scenes which have been shot
simultaneously from various angles.You can change the
camera angle if the (
“ANGLE ICON” setting is“OFF” in the OTHERS menu,the
) icon appears on the screen.If the
1
4
2
5
8
0
3
6
CHANNEL
(
) icon will not appear.(Refer to page 85.)
Example: DVD
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Press DVD first.
During playback,pressANGLE.
MENU
TOP MENU
1
Option window will appear.
ENTER
DISPLAY
RETURN
1 / 8
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
SEARCH REPEAT
EN 75
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Settings (Cont’d)
Black Level Setting
DVD
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
Adjust the Black Level Setting to make the dark areas
of theTV picture brighter.
Press DVD first.
1
4
2
5
8
0
3
6
CHANNEL
During playback,press MODE.
1
PROGRAM
RECORDINGS
Option window will appear.
7
9
CLEAR
+10
MODE
AUDIO
OFF
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Press
/
or ENTER to select a desired setting.
2
3
ENTER
DISPLAY
RETURN
ON
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
REC/OTR
PAUSE
A-B
To exit the black level setting menu,
press RETURN
SEARCH REPEAT
.
Note
• The setting will be saved even if the unit is turned off
or stopped playback.
76 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Settings (Cont’d)
Stereo Sound Mode
CD
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
This unit allows you to select a sound mode during CD
playback.
Press DVD first.
1
4
2
5
8
0
3
6
CHANNEL
During playback,pressAUDIO.
1
PROGRAM
Option window will appear.
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
STEREO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Each time you press AUDIO, sound mode changes
as example below.
(right and left channels
are active)
ENTER
STEREO
DISPLAY
RETURN
(left channel is active)
(right channel is active)
L-ch
R-ch
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
SEARCH REPEAT
EN 77
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Disc Playback)
Special Settings (Cont’d)
Virtual Surround
MP3
DVD
CD
WMA
TIMER
PROG.
POWER
OPEN/CLOSE
SET UP
You can enjoy stereophonic virtual world on your
existing 2 channel stereo system.
1
4
2
5
8
0
3
6
Press DVD first.
CHANNEL
During playback,press MODE repeatedly until the
1
PROGRAM
Virtual Surround icon
appears.
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
OFF
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
Press
/
or ENTER to select a desired setting.
2
3
ENTER
1
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
OFF: No effects (original sound)
1: Natural effect
PLAY
STOP
REC/OTR
PAUSE
A-B
2: Emphasized effect
SEARCH REPEAT
To exit the virtual surround setting menu,
press RETURN
.
Note
For CD play back only
• Virtual Surround will not be effective if the sound
mode is set to something other than STEREO. Refer
to “Stereo Sound mode”.
• When playing back a 96kHz withVirtual Surround
function, the sound will be down sampling at 48kHz
and output as digital audio.
78 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP
Press DVD first.
Press SET UP to display SETUP Menu. Choose QUICK Menu,CUSTOM Menu or INITIALIZE Menu using
/
, then press
ENTER to display it. These menus allow you to perform all main functions and change setting for them.
QUICK Menu
You can select the “PLAYER MENU”,“TV ASPECT” or “DOLBY DIGITAL”on the QUICK menu quickly.
1
2
STOP
SET UP
or
Select the desired item.
<SETUP MENU>
Confirm that “QUICK” is selected.
ENTER
QUICK SETUP
P80 A Step 5
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
QUICK SETUP
4:3 LETTER BOX
BITSTREAM
P81
Step 5
Step 5
B
C
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
P82
ENTER
ENTER
•
Refer to the sections “PLAYER MENU”,
“TV ASPECT” or “DOLBY DIGITAL”
on pages 80-82.
CUSTOM Menu
You can change the settings of the unit.
QUICK
Items with
are also accessible from the QUICK menu.
STOP
SET UP
2
1
3
or
or
ENTER
<SETUP MENU>
Select the desired item.
Select “CUSTOM”.
ENTER
LANGUAGE
QUICK SETUP
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
SUBTITLE
DISC MENU
PLAYER MENU
ENTER
O
DISPLAY menu
PARENTAL menu
OTHERS menu
AUDIO menu
LANGUAGE menu
DISPLAY
AUDIO
OTHERS
LANGUAGE
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
DRC
ON
ANGLE ICON
AUTO POWER OFF ON
ON
PARENTAL LEVEL ALL
SUBTITLE
DISC MENU
PLAYER MENU
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
ENTER
ENTER
ENTER
ENTER
page 85
page 80
page 81
page 82
page 83
A
B
C
D
E
INITIALIZE Menu
You can reset the default setting of the unit. (Except PARENTAL Setting.)
To exit the
menu.
4
1
2
3
STOP
SET UP
or
or
SET UP
Select “YES”.
ENTER
ENTER
Select “INITIALIZE”.
<SETUP MENU>
INITIALIZE
Press
twice.
Note
QUICK SETUP
QUICK SETUP
Initialize?
NO
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
•
When you cancel
to initialize at step
3, select “NO”.
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
YES
ENTER
EN 79
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP (Cont’d)
A LANGUAGE Setting
Follow steps 1 to 3 in the“CUSTOM Menu” section
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
on page 79.
Using
/
,select a desired item.Press ENTER.
4
1
4
2
5
8
0
3
6
LANGUAGE
PROGRAM
RECORDINGS
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
SUBTITLE
DISC MENU
PLAYER MENU
7
9
CLEAR
+10
MODE
AUDIO
ENTER
ZOOM SUB TITLE ANGLE
LANGUAGE items will appear.
Using ,select a desired language.
MENU
TOP MENU
/
5
Press ENTER.
ENTER
DISPLAY
RETURN
AUDIO *1 *2 (Default: ORIGINAL)
Sets the audio language.
SKIP
REV
DVR
DVD
SKIP
FWD
AUDIO
ORIGINAL
ENGLISH
FRENCH
PLAY
STOP
REC/OTR
PAUSE
A-B
SUBTITLE: *1 *2 (Default: OFF)
Sets the subtitle language.
SEARCH REPEAT
SUBTITLE
OFF
ENGLISH
FRENCH
DISC MENU: *1 (Default: ENGLISH)
Sets the language in DVD menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
QUICK
PLAYER MENU:
(Default: ENGLISH)
Sets the language for the On-Screen Display.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
Note
*1
• Language options are not available with some discs.
• If OTHER is selected in the AUDIO, SUBTITLE or
DISC MENU screen, press four-digit number to enter
the code for the desired language. (Refer to the
language code list on page 92.)
To exit the menu,press SET UP.
6
• Only the languages supported by the disc can be
selected.
*2
• Language setting for Audio and Subtitle are not
available with some discs.Then press SUBTITLE or
AUDIO. Details are on pages 73-74.
80 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP (Cont’d)
B DISPLAY Setting
You can change the display functions.Follow steps 1 to
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
3 in the“CUSTOM Menu” section on page 79.
Using
/
,select a desired item.Press ENTER.
4
1
4
2
5
8
0
3
6
PROGRAM
RECORDINGS
DISPLAY
7
9
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
CLEAR
+10
MODE
AUDIO
ENTER
ZOOM SUB TITLE ANGLE
DISPLAY items will appear.
MENU
TOP MENU
Using
Press ENTER.
/
,select a desired setting.
5
ENTER
QUICK
TV ASPECT:
(Default: 4:3 LETTER BOX)
DISPLAY
RETURN
TV ASPECT
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
REC/OTR
PAUSE
A-B
• Select “4:3 LETTER BOX”, so that black bars may
appear on the top and bottom of the screen.
• Select “4:3 PAN & SCAN” for a full height picture
with both sides adjusted.
• Select “16:9 WIDE” if a wide-screen TV is
connected to this unit.
SEARCH REPEAT
STILL MODE: (Default:AUTO)
STILL MODE
TV ASPECT
STILL MODE
4:3 LETTERBOX
AUTO
AUTO
FIELD
FRAME
• Select “AUTO” usually.
• If you select AUTO, automatically select the best
resolution setting (FRAME or FIELD) based on the
data characteristics of the pictures. (default)
• If you select “FIELD”, the picture in the still mode
will be stabilized.
• If you select “FRAME”, the picture in the still mode
will be highly defined.
• An individual picture on TV screen is called a
“frame”, which consists of two separate images
called a “field”.
• Some pictures may be blurred at if you select
“AUTO” in the still mode due to their data
characteristics.
To exit the menu,press SET UP.
6
EN 81
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP (Cont’d)
C AUDIO Setting
Choose the appropriate audio settings for your
equipment.It only affects during the playback of
DVD discs. Follow steps 1 to 3 in the“CUSTOM
Menu” section on page 79.
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
1
4
2
5
8
0
3
6
Using
/
,select a desired item.
4
PROGRAM
RECORDINGS
7
9
AUDIO
CLEAR
+10
MODE
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
ZOOM SUB TITLE ANGLE
ENTER
MENU
TOP MENU
AUDIO items will appear.
Press ENTER to change the setting.
5
ENTER
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft
and loud sounds.
DISPLAY
RETURN
SKIP
REV
DVR
DVD
SKIP
FWD
DRC
ON
OFF
PLAY
STOP
DOWN SAMPLING ON
ON
DOLBY DIGITAL
BITSTREAM
BITSTREAM
REC/OTR
PAUSE
A-B
SEARCH REPEAT
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC
ON
ON
DOWN SAMPLING ON
OFF
DOLBY DIGITAL
BITSTREAM
BITSTREAM
QUICK
DOLBY DIGITAL:
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to
a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2
channel).
DRC
ON
ON
ON
PCM
Note
DOWN SAMPLING ON
DOLBY DIGITAL
DRC:
BITSTREAM
• This function is available only on the discs which are
recorded in the Dolby Digital format.
DOWN SAMPLING:
• When playing disc with copyright Protection, the
sound will be down sampled at 48kHz, even if you set
to “OFF”.
To exit the menu,press SET UP.
6
• This function is available only on digital
outputting of a disc recorded in 96kHz.
82 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP (Cont’d)
D PARENTAL Setting
Parental Control limits the disc viewing that exceed your
settings.(An incorrect password will be not acceptable.)
This feature prevents your children from viewing
inappropriate materials.
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
1
4
2
5
8
0
3
6
Parental Levels
Parental Level allows you to set the rating levels of
your DVD discs.Playback will stop if the ratings
exceed the levels you set.Follow steps 1 to 3 in the
“CUSTOM Menu” section on page 79.
PROGRAM
RECORDINGS
7
9
CLEAR
+10
MODE
AUDIO
If a password is not yet set,enter your desired
password (except for 4737) using the Number
Button.Press ENTER.
4
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
ENTER
PASSWORD
DISPLAY
RETURN
ENTER
SKIP
REV
DVR
DVD
SKIP
FWD
If a password is already set, enter the current
four-digit password using the Number Button.
Press ENTER.
PLAY
STOP
PARENTAL menu will appear.
REC/OTR
PAUSE
A-B
Using
/
,select“PARENTAL LEVEL”.
5
6
SEARCH REPEAT
Press ENTER.
PARENTAL LEVEL
PASSWORD CHANGE
ALL
Using
/
,select desired level.
Press ENTER.
PARENTAL LEVEL
ALL
8
7 [NC-17]
6 [R]
CONTROL LEVELS
• ALL:
• Level 8:
All parental locks are canceled.
DVD softwares of any grades
(adult/general/children) can be played back.
• Levels 7 to 2: Only DVD softwares intended for general
use and children can be played back.
• Level 1:
Only DVD softwares intended for children
can be played back, with those intended for
adult and general use prohibited.
TIPS FOR LEVELS
• 7 [NC-17]: No one under 17 admitted
• 6 [R]:
Restricted; under 17 requires
accompanying parent or adult guardian
Unsuitable for children under 13
Parental Guidance suggested
General Audience
• 4 [PG13]:
• 3 [PG]:
• 1 [G]:
Note
• DVD-Video discs may not respond to the parental
lock settings. Make sure this function works with
your DVD-Video discs.
To exit the menu,press SET UP.
7
EN 83
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP (Cont’d)
D PARENTAL Setting (Cont’d)
TIMER
PROG.
To Change the Password for
Parental Controls
POWER
OPEN/CLOSE
CHANNEL
SET UP
You can change your password for parental controls.
Follow steps 1 to 3 in the“CUSTOM Menu” section
on page 79.
1
4
2
5
8
0
3
6
Using the Number Button,enter your current
PROGRAM
4
RECORDINGS
password.
7
9
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
MENU
TOP MENU
ENTER
PARENTAL menu will appear.
ENTER
Using
Press ENTER.
/
,select“PASSWORD CHANGE”.
5
6
DISPLAY
RETURN
PARENTAL LEVEL
ALL
SKIP
REV
DVR
DVD
SKIP
FWD
PASSWORD CHANGE
PLAY
STOP
REC/OTR
PAUSE
A-B
Using the Number Button,enter your new four-
digit password (except for 4737).Press ENTER.
SEARCH REPEAT
PASSWORD
ENTER
To exit the menu,press SET UP.
7
Note
• Record the password in case you forget it.
• If you forget the password, press [4], [7], [3], [7] at
step 4, then enter your new password. Password will
be cleared and parental levels will be set to “ALL”.
84 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD (Setups)
DVD SETUP (Cont’d)
E OTHERS Setting
You can change other functions.Select“OTHERS” at
TIMER
PROG.
POWER
OPEN/CLOSE
CHANNEL
SET UP
step 3 in the“CUSTOM Menu” section on page 79.
Using
/
,select a desired item.
4
1
4
2
5
8
0
3
6
OTHERS
PROGRAM
RECORDINGS
ANGLE ICON
ON
AUTO POWER OFF ON
7
9
ENTER
CLEAR
+10
MODE
AUDIO
ZOOM SUB TITLE ANGLE
Press ENTER to change the setting.
5
MENU
TOP MENU
ANGLE ICON: (Default: ON)
Set to “ON” to show the angle icon when multiple
camera angles are available during DVD playback.
ENTER
DISPLAY
RETURN
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
SKIP
REV
DVR
DVD
SKIP
FWD
PLAY
STOP
AUTO POWER OFF: (Default: ON)
Set to “ON” to turn the DVD device off
automatically after 30 minutes of no use.
REC/OTR
PAUSE
A-B
SEARCH REPEAT
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
To exit the menu,press SET UP.
6
EN 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting
Before requesting service for this unit,check the table below for a possible cause of the problem you are experiencing. Some
simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
General Operation
Error message
Cause & Solution
• The operation is not available.
Error
• The operation is not available since aTimer Recording will start soon.
Timer program starts soon.
Discs
Error message
Cause & Solution
Disc Error
• Invalid disc is inserted. Please insert a disc supported by this unit.
(See page 56.)
--Please eject the disc.--
Playback feature may not
be available on this disc.
Region Error
• A disc with the invalid region code is inserted.
This unit only supports the discs with region code 1 or ALL.
--Please eject the disc.--
Playback is not authorized
in your region.
Timer Recording / Recording & Navigator
Error message
Cause & Solution
Error
• The entry for theTimer Recording is invalid.The recording duration must
be in 24 hour period.The end time must be later than the present time,
and the start time must be before 1-1-2055. Re-program theTimer
Recording correctly. (See pages 28-31.)
Prohibited timer program.
Error
• The maximum number of timer programs is exceeded.
Delete unnecessary timer programs. (See pages 28-31.)
Cannot register timer program.
Playback / Editing
Error message
Cause & Solution
Parental Lock On
• The current Parental Lock setting prohibits the playback.
Change the Parental Level. (See page 83-84.)
The current selected parental level
prohibits playback.
86 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (Cont’d)
Symptom
The power does not turn on.
Solution
• Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
The unit turns on automatically without
any operation.
• The unit turns on automatically 3 minutes before theTimer
P
O
W
E
Recording.
The OSD Language Setting Menu appears • Finish up the Language Setting procedure by selecting a
every time the power turns on.
language in the OSD Language Setting Menu. Press ENTER to
activate the setting.
R
The power turns off automatically .
• The power turns off automatically when abnormality is
detected on the disc. Press POWER or OPEN / CLOSE
A
to open the disc tray, and before it is opened completely, press
the button again.Then take out the disc.
• The power turns off automatically when an OTR is completed.
Symptom
Solution
The unit does not function.
•
or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted
No picture, sound or menu appears on
the screen.
• Check if the connections are made securely and correctly.
• Check if the cables are not damaged.
G
E
• Check if a correct external input channel is selected on your
TV. (See page 17.)
N
E
• Check if you have completed the Channel Setting.
R
A
L
No picture or menu appears on the
screen in the DVR mode.
• COMPONENT VIDEO OUT connection is not available in the
DVR mode. Use other connection such asVIDEO OUT or
S-VIDEO OUT.
Clock Setting and Channel Setting cannot • If aTimer Recording is in standby or if a recording is in
be performed.
progress, these operations cannot be performed. Delete timer
programs or stop the recording.
The unit does not operate properly.
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on until the moisture evaporates.
(See page 4.)
EN 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (Cont’d)
Symptom
TV channels cannot be changed.
Solution
• Check if the connections are made securely and correctly.
C
H
A
N
N
E
• Check if the cables are not damaged.
• Try Channel Setting by following the steps on page 20-21.
Only specific channels do not appear.
• The channels may be set to be skipped.
The external input channels (such as
L1) cannot be skipped.
•
This unit does not skip the external input channels.
This is not a malfunction.
L
Symptom
Solution
Recording is impossible.
•
This unit cannot record a program that contains copy protection
signal.This is not a malfunction.
• The space of the DVR may be used up.Try deleting unnecessary
titles from theTitle List.
• The maximum number of titles has exceeded. Delete the
unnecessary titles to make the total numbers of titles less than
300.
R
E
C
O
R
D
I
• Check if the connections are made securely and correctly.
• This unit cannot record any type of discs.
Recording on the DVD disc is impossible.
N
G
The image from the external device
cannot be displayed or recorded.
•
Turn on the all connected devices.
• Check if the connections are made securely and correctly.
• The internal clock of the unit may have been stopped due to a
power failure that lasted for more than 30 seconds. Reset the
clock. (See pages 29-31.)
Timer Recording cannot be performed.
88 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (Cont’d)
Symptom
Disc Playback cannot be performed.
Solution
• Check if the playable disc is inserted.
• Check if the disc is loaded correctly with the labeled
side facing up.
• Discs made on other devices or on personal computers cannot
be played back on this unit unless it is finalized on the device.
Even if it is finalized, the performance of those discs are not
guaranteed on this unit.
• The disc may be dirty or flawed. Clean the disc.
• Check if all the connections are made correctly.
• Check if the setting for the Progressive Scan is correct.
(See page 16.)
• Check the Parental Lock Setting. (See pages 83-84.)
Playback does not start from
the beginning.
• Resume function may be activated. See page 37, 59 to cancel
the resume point.
• Check theTV Aspect Ratio. (See pages 53, 81.)
• A different aspect ratio will be used when the aspect ratio
specified by the disc is not supported by this unit.
TV aspect ratio does not match
for yourTV screen.
P
L
A
Y
B
A
C
K
Playback picture is distorted.
Color of the picture is abnormal.
•
During fast forward or fast reverse, playback picture may be
distorted.This is not a malfunction.
• Connect toTV directly.When you connect this unit with the
television viaVCR or other devices, the picture may be
distorted due to the copy-protection signal.
• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances,
such as a cellular phone, away.
There is no sound, or no subtitle.
•
•
Turn on all connected devices.
Check if the external input channel is set correctly.
• Check if the connections are made securely and correctly.
•
•
Check if the Audio Out Setting is set correctly. (See pages 53, 82)
There is a possibility that the selected subtitle language is not
supported by the disc.
Audio Out Setting can not be changed.
• If the audio source is in the Dolby Digital format, set the Dolby
Digital Setting to “PCM” in the Setup Menu. (See pages 53, 82)
Audio Language or the Subtitle Language
of the DVD can not be changed.
• Multilingual subtitles are not supported by the disc.
•
Some audio languages or the subtitle languages can be changed only
from the Disc Menu. Please refer to the disc’s manual.
Camera angles can not be changed.
• Even though the multi-angle feature is supported by the disc,
that does not mean all the scenes are shot from multi-angles.
Changing angles are available only for those scenes shot from
the multi-angle.
EN 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (Cont’d)
Symptom
Solution
E
D
I
Titles can not be edited or deleted.
• The titles itself may be protected. Cancel the protection by
following the steps on page 48.
T
I
N
G
Symptom
No operation by remote control
Solution
R
E
M
O
T
E
• Check if the batteries are weak or inserted incorrectly.
Replace weak batteries and insert with their polarities
-
(+/ signs) as indicated.
• Aim the remote control at the remote sensor and operate
within 23 feet (7 m) of the unit.
• Remove all obstacles to clear the path of the infrared signal.
• Refer to the infrared signal. (See page 13.)
• Select the correct mode to operate by pressing DVR or DVD.
• The operable range from the unit is 10 feet (3m) within 15˚.
C
O
N
T
R
O
L
Pressing SET UP does not do anything.
• While the Programmed Recordings Screen, or theTitle List is
displayed or while the disc is loading, SET UP does not
respond.
Symptom
Solution
O
T
H
E
R
S
• Check that the AC power cord is connected securely.
The Clock display does not appear
in the Front Panel Display.
• (In case of power failure) Check the breaker and Clock Setting.
When you forget the password
for Parental Lock.
• Please cancel the password and the set level. (See pages 83-84.)
* If you are still having trouble with this unit after checking‘Troubleshooting’,write down the error code and the error
description,and call our helpline mentioned on the front page to locate anAuthorized Service Center.
90 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Glossary
Analog audio
Dolby Digital
Sampling frequency
An electrical signal that directly represents
sound. In contrast,digital audio which can be
an electrical signal,but is an indirect
representation of sound. See also Digital
audio.
The system developed by Dolby
Laboratories to compress digital sound.
It offers you sound of stereo (2ch) or
multi-channel audio.
The rate which sound is measured by a
specified interval to turn it into digital
audio data. The numbers of sampling in
one second defines as sampling
frequency. The higher the rate,the
better the sound quality is.
Finalize
Aspect ratio
To make recorded contents on DVD
discs possible to be played back on DVD
players.
SAP (SecondaryAudio Program)
The width of aTV screen relative to its
height. ConventionalTVs are 4:3 (in other
words,the screen is almost square);
widescreen models are 16:9 (the screen is
almost twice as wide as it is high).
Sub-audio channel which is delivered
separately from main-audio channel. This
audio channel is used as an alternate in
bilingual broadcasting.
MP3 (MPEGAudio Layer 3)
MP3 is a method of compressing files.
You can copy MP3 files on CD-RW / R
discs from the computer and play back
the files on this unit.
Chapter
S-Video output
Just as a book is split up into several
chapters,a title on a DVD disc is usually
divided into chapters. See alsoTitle.
It delivers independently each signal of
color(C) and luminance(Y) toTV as video
signals,so that higher-quality picture will
be materialized.
PCM (Pulse Code Modulation)
PCM is a format that converts audio
into digital data. It is mainly used for
Audio CDs and DAT. This unit can play
back sounds as realistic as possible by
converting even compressed Dolby
Digital and MPEG audio to PCM.
Component video output
Title (DVD only)
A collection of chapters on DVD disc.
See also chapter.
This is a video signal format that conveys
each of three principal colors of light (red,
blue and green) through different signal
lines. This allows the viewers to
Track
experience picture colors as original as it
is. There are several signal formats,
Progressive scan (480p)
Audio CDs use tracks to divide the
content of a disc. The DVD equivalent is
A type of display that does not split
includingY / PB / PR andY / CB / CR
.
each frame into fields,and instead scans called a chapter. See also Chapter.
Digital audio
directly through all the scanlines of
WMA
An indirect representation of sound by
numbers. During recording,the sound
is measured at discrete intervals (44,
100 times a second for CD audio) by
an analog-to-digital converter,
generating a stream of numbers. On
playback,a digital-to-analog converter
generates an analog signal based on
these numbers. See also Sampling
frequency andAnalog audio.
each frame in order.Progressive scan
WMA is the audio file compressing
technology developed by Microsoft.
You can copyWMA files on CD-RW /
R discs from a computer and play them
back on this unit.
provides less flickering and higher
image resolution than traditional (480i)
TV signals.
See page 16 for instructions on
selective Progressive Scan mode.
Regions code
Regions associate discs and players with
particular areas of the world. This unit
will only play back discs that have
compatible region codes. You can find the
region code of your unit by looking at the
rear panel. Some discs are compatible
with more than one region (or all
regions).
EN 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Language Code
Language
Code
Language
Code
Language
Code
Language
Code
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish [SPA]
Sundanese
Swahili
Swedish [SWE]
Tagalog
Tajik
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Marathi
Moldavian
Mongolian
Nauru
Nepali
Hungarian [HUN] 5467
Icelandic
Norwegian [NOR] 6061
Occitan
Oromo (Afan)
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese [POR] 6266
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Tamil
Tatar
Telugu
Thai
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
6149
6159
6164
6247
6265
5247
6258
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean [KOR]
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Breton
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
Faroese
6367
6459
6461
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
Yiddish
Yoruba
Zulu
Fiji
Finnish [FIN]
92 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Maintenance
SERVICING
• Please refer to relevant topics on the‘Troubleshooting’ on pages 86–90 before returning the product.
• If this unit becomes inoperative,do not try to correct the problem by yourself. There are no user-serviceable parts
inside. Turn off,unplug the power plug and please call our help line mentioned on the front page to locate anAuthorized
Service Center.
CLEANINGTHE CABINET
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
DVR
DVR HANDLING
• DVR is a precision apparatus that is susceptible to vibration, strong impact or dirt.
Depending on the installation environment or handling, the unit may become partially damaged or in the worst case,
recording or replaying may not be available.Especially while the DVR is in motion, do not subject it to vibration or
strong impact or pull out the power plug. And if a power failure occurs the content of the recording/replaying
program may be lost.
DVR
MOVING THE UNIT
• DVR rotates at high speed when in operation. Be sure that rotation has stopped and then move the unit without
subjecting it to strong impact or vibration.
DVD
CLEANING DISCS
•When a disc becomes dirty,clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine,thinner,commercially available cleaners, detergent,abrasive cleaning agents or
antistatic spray intended for analog records.
DVD
CLEANINGTHE DISC LENS
• If this unit still does not perform properly although you refer to the relevant sections and to‘Troubleshooting’ in this
Owner’s Manual,the laser optical pickup unit may be dirty. Consult your dealer or anAuthorized Service Center for
inspection and cleaning of the laser optical pickup unit.
DVD
DISC HANDLING
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
•Always store the disc in its protective case when it is not used.
EN 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
FrequentlyAsked Questions
–– Can I play back DVD-Video that is bought in another country?
Possible only if the region code of the disc is 1 orALL.
–– Is this unit JPEG compatible?
No.
–– Can I connect the unit to my PC?
No,you cannot control the unit by PCs.
Specification
General
System
Dimensions
DVR, DVD Player
(width x height x depth)
17 3/16" x 2 3/4" x 11 11/16"
(435 x 69.5 x 296 mm)
41ºF to 104ºF (5ºC to 40ºC)
less than 80% (non condensing)
NTSC
DVR
Internal 3.5 inch HDD 80 GB
AC120V, 60 Hz
30W (standby: 2.5W)
8.2 lbs ( 3.7 kg )
Operating temperature
Operating humidity
TV format
Power requirements
Power consumption
Weight
Recording
Audio recording format
Video recording format
Sampling frequency
Compression format
13.5MHz
48kHz
Dolby Digital
Sampling frequency
Compression format
MPEG
Tuner
Receivable channels
VHF
UHF
CATV
2-13ch
14-69ch
C1-C125ch
Input/Output
Video output
Output level
Jacks
Input 1 (rear)
1Vp-p (75Ω)
RCA jack
Video input
Input level
Jacks
1Vp-p (75Ω)
RCA jack
S-Video output
Y (Iuminance)
- Output level
C (color)
Component video output
Output level
Y: 1.0Vp-p (75Ω),
B/CB, PR/CR: 0.7Vp-p (75Ω)
P
1Vp-p (75Ω)
Jacks
RCA jacks
- Output level
Jack
286 mVp-p (75Ω)
4 pin mini DIN
Audio input
During audio input
Jacks
Digital audio output
Output level
Jack
Input 1 (rear)
2V rms (47kΩ)
RCA jacks
500 mVp-p (75Ω)
RCA jack
Audio output
During audio output
Jacks
Output 1,2 L/R
2V rms (47kΩ)
RCA jacks
VHF/UHF antenna
input/output terminal
VHF/UHF set 75Ω
Note
The specifications and design of this product are subject to change without notice.
94 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Memo
EN 95
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or
workmanship as follows :
DURATION :
PARTS :
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from
the date of original retail purchase. Certain parts are excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LABOR :
LIMITS AND EXCLUSIONS :
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or
if service was attempted by AN UNAUTHORIZED SERVICE CENTER. This limited warranty does not apply to
any product not purchased and used in CANADA.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP. or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN CANADA.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE
CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED
SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS
COSTS WILL BE CHARGED.
ATTENTION :
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR
NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS :
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER.
FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
Tel: 1-800-605-8453
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
1VMN22701 / E41A1CD #####
Download from Www.Somanuals.com. All Manuals Search And Download.
|