Owner’s Manual
DVD Recorder with Video Cassette Recorder
CWR20V4
OPEN/CLOSE
REW
F.FWD STOP/EJECT PLAY
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
RECORD
POWER
VCR
SELECT
DVD
S-VIDEO
VIDEO
L
-
AUDIO
-
R
INSTRUCTIONS EN FRANÇAIS INCLUSES
Supplied Accessory
• Remote control
(NB108UD)
with two AA batteries
• RF cable
WPZ0901TM002)
• Audio/Video cables
(WPZ0102TM015 or
WPZ0102LTE01)
• Owner’s Manual
(1VMN20316)
• Quick Use Guide
(1VMN20195)
(
Owner's Manual
If you need additional operating assistance after reading this owner’s manual or to
order replacement accessories, please call
TOLL FREE : 1-800-605-8453
or visit our web site at http://www.funai-corp.com
Before you use this unit , you need to complete connections. Refer to
“Connections” on pages 13-15.
To record a program easily, refer to “Easy DVD recording” on pages 16-17
after connections are completed.
(You CANNOT record on any copyright protected DVD disc with this unit.)
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Precautions (cont’d)
Important Safeguards
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
porting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of anten-
na-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig.A)
2. Retain Instructions-The safety and operating instructions should
be retained for future reference.
3. HeedWarnings -All warnings on the appliance and in the oper-
ating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions should
be followed.
FIGURE A
ANTENNA
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
LEAD
WIRE
5. Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
EXCEPTION:A product that is meant for uninterrupted ser-
vice and, that for some specific reason, such as the possibility
of the loss of an authorization code for a CATV converter, is
not intended to be unplugged by the user for cleaning or any
other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in
item 5.
6.Attachments - Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
7.Water and Moisture- Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this product on an unstable cart,
stand,tripod,bracket,or table.The product may fall,causing seri-
ous injury to a child or adult, and serious damage to the appli-
ance. Use only with a cart, stand, tripod, bracket, or table rec-
ommended by the manufacturer, or sold
with the product. Any mounting of the
appliance should follow the manufacturer's
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. Lightning - For added protection for this product during a light-
ning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
15. Power Lines -An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or cir-
cuits.When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or cir-
cuits as contact with them might be fatal.
16. Overloading - Do not overload wall outlets and extension cords
as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind into
this product through any openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
18. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to qualified service per-
sonnel.
19. Damage Requiring Service - Unplug this product from the wall
outlet and refer servicing to qualified service personnel under
the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the oper-
ating instructions.Adjust only those controls that are covered by
the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive
work by a qualified technician to restore the product to its nor-
mal operation.
instructions and should use a mounting
accessory recommended by the manufac-
turer. An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn.
9.Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered.The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
10. Power Sources -This product should be operated only from the
type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home,consult your
appliance dealer or local power company. For products intend-
ed to operate from battery power,or other sources,refer to the
operating instructions.
11. Grounding or Polarization - This product is equipped with a
polarized alternating-current line plug (a plug having one blade
wider than the other).This plug will fit into the power outlet
only one way.This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polar-
ized plug.
12. Power Cord Protection - Power supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them,paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit
from the appliance.
e.If the product has been dropped or damaged in any way.
f.When the product exhibits a distinct change in performance this
indicates a need for service.
20. Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, elec-
tric shock or other hazards.
21. Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22. Heat -This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
13. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code,ANSI/NFPA No.70,provides infor-
mation with regard to proper grounding of the mast and sup-
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Precautions (cont’d)
Installation Location
Maintenance
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do not
place anything directly on top of the unit. Do not place
the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat.Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes on the
sides of the unit.Avoid locations subject to strong vibra-
tion or strong magnetic fields.
SERVICING
• Please refer to relevant topics on the Troubleshooting
Guide on pages 97-99 before return the product.
• When this unit becomes inoperative, do not try to cor-
rect the problem by yourself.There are no user-service-
able parts inside.Turn off, unplug the power plug, and
please call our help line mentioned on the front page to
locate an Authorized Service Center.
Avoid the Hazards of Electrical Shock and Fire
CLEANINGTHE CABINET
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug the
power cord immediately and take the unit to our
Authorized Service Center for servicing.
• Do not put your fingers or objects into the unit cassette
holder.
CLEANING DISCS
• When a disc becomes dirty, clean it with a cleaning
cloth.Wipe the disc from the center out. Do not wipe in
a circular motion.
Moisture Condensation Warning
• Do not use solvents such as benzine, thinner, commer-
cially available cleaners, detergent, abrasive cleaning
agents or antistatic spray intended for analogue records.
Moisture condensation may occur inside the unit when it is
moved from a cold place to a warm place, or after heating
a cold room or under conditions of high humidity. Do not
use this unit at least for 2 hours until its inside gets dry.
CLEANINGTHE DISC LENS
• If this unit still does not perform properly although you
refer to the relevant sections and to “TROUBLESHOOT-
ING GUIDE” in this Owner’s Manual, the laser optical pick-
up unit may be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the laser opti-
cal pickup unit.
About Copyright
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This product incorporates copyright protection technolo-
gy that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise autho-
rized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
DISC HANDLING
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
Symbol in this owner's manual
Many functions of this unit are depending on the disc type
or the recording mode.
To specify for what disc type or recording mode each
function is, we put the following symbols at the beginning
of each item to operate.
AUTO HEAD CLEANING
• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulat-
ed on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in the unit may need to be cleaned.
Symbol
Description
Available to DVDVideo discs
DVD-V
Available to DVD-RW inVideo mode
Available to DVD-RW inVR mode
Available to DVD-R discs
DVD-RW
DVD-RW
DVD-R
CCDD
1. Please visit your local Audio/Video store and purchase a
good qualityVHSVideo Head Cleaner.
2. If aVideo Head Cleaner does not solve the problem,
please call our help line mentioned on the front page to
locate an Authorized Service Center.
Available to Audio CDs
Available to CD-R/RW discs with
MP3 files
Available toVHS tapes
MP3
VCR
Use only cassettes marked
.
NOTES:
Indicates that you need to select the DVD
mode by pressing DVD button on the
remote control before proceeding next step.
DVD
VCR
First:
(Press:)
• Remember to read the instructions along with the video
head cleaner before use.
• Clean video heads only when problems occur.
Indicates that you need to select theVCR
mode by pressingVCR button on the
remote control before proceeding next step.
First:
(Press:)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Table of contents
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .52
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Repeat/Random/Program play . . . . . . . . . . . . . .54
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Selecting the format of audio and video . . . . . .56
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .56
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .57
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .58
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .58
Before you start . . . . . . . . . . . . . . . . . . .2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Functional overview . . . . . . . . . . . . . . . . . . . . . . .7
Installing batteries in the remote control . . . . . . . . . .9
Using a remote control . . . . . . . . . . . . . . . . . . . . . . .9
VCR/DVD recorder switching . . . . . . . . . . . . . . . . . . .9
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . . .9
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connections . . . . . . . . . . . . . . . . . . . . .13
Connection to aTV . . . . . . . . . . . . . . . . . . . . . . .13
Connection to a cable box or satellite box . . . .14
Editing . . . . . . . . . . . . . . . . . . . . . . . . .59
Information on disc editing . . . . . . . . . . . . . . . . .59
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .59
Editing discs inVideo mode . . . . . . . . . . . . . . . . . . .59
Connection to an Audio System . . . . . . . . . . . . .15
Getting started . . . . . . . . . . . . . . . . . . .16
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .16
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .18
Getting channels automatically . . . . . . . . . . . . . . . . .18
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .19
Selecting theTV stereo or SAP . . . . . . . . . . . . .20
Editing discs inVR mode . . . . . . . . . . . . . . . . . . . . .60
Editing DVD-RW discs inVideo mode . . . . . . . .61
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .62
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .21
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .22
Setting the daylight saving time . . . . . . . . . . . . . . . .24
Selecting theTV aspect ratio . . . . . . . . . . . . . . .25
Setting or clearing chapter markers . . . . . . . . . . . . .64
Editing DVD-RW discs inVR mode (Original) . .65
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .66
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .67
Setting or clearing chapter markers . . . . . . . . . . . . .69
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .70
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .72
Recording . . . . . . . . . . . . . . . . . . . . . . .26
Information on DVD recording . . . . . . . . . . . . . .26
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Restrictions on recording . . . . . . . . . . . . . . . . . . . .26
Information on copy control . . . . . . . . . . . . . . . . . .27
Making discs playable in other DVD player (Finalize) 27
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .28
Settings for the recording format to a blank disc . . .28
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31
Checking the recording picture quality . . . . . . . . . .32
One-touch timer recording . . . . . . . . . . . . . . . .33
Releasing titles from protecting . . . . . . . . . . . . . . . .73
Editing DVD-RW discs inVR mode (Playlist) . . .74
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .75
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .76
Setting or clearing chapter markers . . . . . . . . . . . . .78
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .79
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .81
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .83
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36
Settings for an external source . . . . . . . . . . . . . .37
Connection to an external source . . . . . . . . . . . . . .37
Recording from an external source . . . . . . . . . . . . .38
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .84
Changing the SETUP menu . . . . . . . . .85
Tour of the SETUP menu . . . . . . . . . . . . . . . . . .85
Settings for Language . . . . . . . . . . . . . . . . . . . . .86
Settings for Display . . . . . . . . . . . . . . . . . . . . . . .88
Settings for Audio . . . . . . . . . . . . . . . . . . . . . . . .90
Settings for Parental lock level . . . . . . . . . . . . . .92
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .41
Setting a disc to protect . . . . . . . . . . . . . . . . . . .42
Playing discs . . . . . . . . . . . . . . . . . . . . .43
Information on DVD play . . . . . . . . . . . . . . . . . .43
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playing discs using the disc menu . . . . . . . . . . . . . . .46
Playing discs using the title menu . . . . . . . . . . . . . . .47
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .48
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .48
Skipping TV commercials during playback . . . . . . . . .49
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .50
Slow forward / Slow reverse play . . . . . . . . . . . . . . .50
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
VCR functions . . . . . . . . . . . . . . . . . . .94
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Recording and One-touch timer recording . . . .94
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
One-touch timer recording . . . . . . . . . . . . . . . . . . . .95
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Other operations . . . . . . . . . . . . . . . . . . . . . . . .96
Others . . . . . . . . . . . . . . . . . . . . . . . . .97
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .97
RF converter output . . . . . . . . . . . . . . . . . . . . .100
Language code . . . . . . . . . . . . . . . . . . . . . . . . .101
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Français . . . . . . . . . . . . . . . . . . . . . . .104
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Features
Followings are what you can do with this unit.
Recording
Play
DVD mode VCR mode
DVD mode
This unit is compatible with both DVD-RW, which is
rewritable repeatedly and DVD-R, which is available for
recording once.Also, this unit allows to record to the
video cassette tape. You can choose either one for your
convenience.
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital, you are allowed to experience the
theater surround sound from discs with surround sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using search func-
tion. Search for a desired point on a disc by title, chapter or time.
Up to 8 programs recording:
You can program the unit to record up to 8 programs, up
to a year in advance. Daily or weekly program recordings
are also available.
Start to play from Original and Playlist (VR mode):
Title playing is available from either an Original list or Playlist.
One-touch timer recording:
Easily you can set a recording time as you prefer. Every
time the REC/OTR button on the remote control or the
RECORD button on the front panel pressed during
recording, the recording time will be increased by 30 min-
utes up to 8 hours.The recording automatically stops
when the recording time you set is reached.
VCR mode
Quick search for what you want to watch:
You can easily find the part you want to watch using Index
search/Time search functions.An index mark will be assigned at
the beginning of each recording you make. For Time search func-
tion, you can go to a specific point on a tape by entering the
exact amount of time you wish to skip.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a video-
tape to a DVD disc.This function will be possible only if
the DVD disc and the videotape are not copy protected.
Editing
DVD mode
DVD mode
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
REC MONITOR:
You can confirm the picture quality for recording in the
current recording speed which you set.
If you want to change the recording speed, press REC
SPEED button to set the desired recording mode.
Making your own Playlist:
With the original remains as it is, you can edit titles on
Playlist variously as you prefer.
Putting names on titles.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Deleting parts of titles, etc.
AutomaticTitle menu making:
The unit makes title menus automatically when finalizing
the disc which are recorded inVideo mode.
Protecting titles:
To avoid erasing titles, the protect function is useful when
it is ON in the original list.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
Compatibility
DVD mode
Available for playing discs recorded inVideo mode
on a regular DVD player (Video mode):
Discs recorded in theVideo mode can be played on regular
DVD players, including computer DVD drives compatible with
DVD-Video playback*.You will need to finalize the discs
recorded inVideo mode to play in other DVD players.
* DVD-Video Format (Video mode) is a new format for recording on DVD-
R/RW discs that was approved by the DVD Forum in 2000.Adoption of this for-
mat is optional for manufactures of DVD playback devices, and there are DVD-
Video players, DVD-ROM drives or other DVD playback devices that do not
play DVD-R/RW discs recorded in the DVD-Video Format.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview
1
2
3
4
5
Front Panel
OPEN/CLOSE
REW
F.FWD STOP/EJECT PLAY
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
RECORD
POWER
VCR
SELECT
DVD
S-VIDEO
VIDEO
L
-
AUDIO
-
R
22 20 18
21 19 17
16
15 14 13 1211 10 9
8
7
6
12. DVD SELECT indicator
1. POWER button / indicator (DVD/VCR)
This indicator appears when the DVD output mode is selected.
13. VCR SELECT indicator
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode, and turn the unit on.
This indicator appears when theVCR output mode is selected.
14. DUBBING button (DVD/VCR)
Press to startVCR to DVD (DVD toVCR) duplication
which you set in the SETUP menu.
15. CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
16. Display (DVD/VCR)
Lights up when power is on.
2. Cassette compartment (VCR)
Insert a tape here.
3. A OPEN/CLOSE button (DVD)
Press to open or close the disc tray.
Refer to “Guide to Displays on the front panel” on page 12.
17. Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
4. SELECT button (DVD/VCR)
Press to select the component you wish to operate.
5. Disc tray (DVD)
Place a disc when open.
18. RECORD button (VCR)
6. AUDIO (L/R) input jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
7. VIDEO input jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
8. S-VIDEO input jack (LINE2) (DVD only)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
Press once to start a recording. Press repeatedly to
start a One-Touch Recording.
19. PLAY button (VCR)
Press to start playback.
20. STOP/EJECT button (VCR)
EJECTbutton-Press to remove the tape from the unit.
STOP button-Press to stop the tape motion.
Press to cancel the proceeding timer recording inVCR.
21. F.FWD button (VCR)
9. RECORD button (DVD)
Press once to start recording.
Press repeatedly to start a One-Touch Recording.
10. PLAY button (DVD)
Press to rapidly advance the tape, or view the picture
rapidly in forward during playback. (Forward Search)
22. REW button (VCR)
Press to start or resume play.
11. STOP button (DVD)
Press to rewind the tape, or to view the picture rapidly
in reverse during the playback mode. (Rewind Search)
Press to stop playback or recording.
Press to cancel the proceeding timer recording in DVD.
1
2 3 4 5
6
Rear Panel
DVD
AUDIO S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT OUT
AUDIO IN AUDIO OUT ANTENNA
IN
Y
L
L
L
CB
R
R
COAXIAL
IN
VIDEO IN VIDEO OUT
OUT
R
CR
OUT
•
These jacks are
useful only in
DVD mode.
1211 10
9 8
7
1. AC Power Cord (DVD/VCR)
8. VIDEO OUT jack (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
2. S-VIDEO IN jack (LINE1) (DVD only)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
Use to connect a TV monitor,AV receiver or other
equipment with a standard video cable.
9. VIDEO IN jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
3. COMPONENTVIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables.
10. S-VIDEO OUT jack (DVD only)
Use to connect the S-Video input of a TV monitor,AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor,AV receiver or other
equipment with standard audio cables.
4. AUDIO IN (L/R) jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
5. AUDIO OUT (L/R) jacks (DVD/VCR)
Use to connect a TV monitor,AV receiver or other
equipment with standard audio cables.
12. DIGITAL AUDIO OUT (COAXIAL) jack
(DVD only)
6. TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
Use to connect an AV receiver, Dolby Digital
decorder or other equipment with a coaxial digital
input jack with a digital coaxial cable.
7. TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma-
nent damage to the unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Remote Control
a One-Touch Recording.
7. SETUP button (DVD/VCR)
Press to display the setup menu.
8. REC MONITOR button (DVD)
19. SLOW button (VCR)
During playback, press to
view the video tape in slow
motion.
14
15
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
.@/:
1
16
ABC
2
DEF
3
Press to check the video to be 20. PAUSE F button
CH
GHI
4
JKL
5
MNO
6
17
recorded before attempting.
9. MENU/LIST button (DVD)
Press to display the Disc menu.
To change ORIGINAL and
PLAYLIST on the TV screen.
(VR mode only)
(DVD/VCR)
2
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Press to pause play or
recording.
18
19
SPACE
0
21. DVD button
DISPLAY
VCR
DVD
PAUSE
20
22
3
5
Press to activate the remote
control in DVD mode. (Refer
to page 9.)
4
7
21
23
PLAY
10. TOP MENU button (DVD)
Press to display the top menu.
11. CLEAR/C-RESET button
(DVD/VCR)
STOP
24
26
Press to select the DVD out-
put mode.
REC/OTR
SETUP
TIMER PROG.
25
27
28
29
6
8
ENTER
SKIP
REC MONITOR
22. PLAY B button
(DVD/VCR)
MENU/LIST TOP MENU
RETURN
SKIP
• DVD mode
9
10
12
CLEAR/C-RESET ZOOM
SEARCH
Press to clear the password once
entered or to cancel the pro-
gramming for CD or to clear the
selecting marker number in the
marker setup mode or to clear
the program once entered in the
timer recording setting mode,etc.
•VCR mode
Press to start or resume play.
23. D button (DVD/VCR)
• DVD mode
11
CM SKIP
MODE
30
13
During playback, press to play
fast forward.
Or during playback is paused,
press to play slow forward.
•VCR mode
Press to reset the tape counter.
12. SEARCH MODE button (VCR)
To call up the index or time
search menu.
Press to rapidly advance the
tape, or view the picture
rapidly in forward during play-
back.
1. POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode. Press
to cancel the timer standby
mode, and turn the unit on.
2. Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title/chap-
ter/track on display or a TV
channel.
13. CM SKIP button (DVD)
During playback, press to skip
the 30 seconds.
24. STOP C button
(DVD/VCR)
Press to stop playback or
recording.
25. TIMER PROG. button
(DVD/VCR)
14. REC SPEED button
(DVD/VCR)
Press to switch the recording
speed.
Press to display the timer
program setting menu.
26. ENTER button
(DVD/VCR)
15. OPEN/CLOSE A button (DVD)
Press to open or close the
disc tray.
Or press to enter values for the
settings in the SETUP menu.
3. DISPLAY button (DVD/VCR)
Press to display or change the
on-screen display.
16. AUDIO button (VCR)
During playback a HiFi video
tape, press to change the
AUDIO OUT setting “HIFI”
and “MONO”.
Press to confirm or select
menu items.
27. K / L / { / B buttons
(DVD/VCR)
4. VCR button
Press to select items or settings.
Press to activate the remote
control inVCR mode. (Refer
to page 9.)
17. CH K / L buttons (DVD/VCR)
• DVD mode
28. RETURN
button
(DVD/VCR)
Press to change the channel
up and down.
Press to return to the previ-
ously displayed menu screen.
29. ZOOM button (DVD)
During playback, press to
enlarge the picture on the
screen.
Press to select theVCR out-
put mode.
•VCR mode
5. E button (DVD/VCR)
• DVD mode
Press to change the channel
up and down.
During playback, press to play
fast reverse.
Press to adjust the tracking
during playback or in slow
motion of the tape.Also while
playback is in still mode,
adjust the picture blurred ver-
tically.
30. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Or during playback is paused,
press to play reverse step by step.
SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or during playback is paused,
press to play slow reverse.
•VCR mode
Press to rewind the tape, or
to view the picture rapidly in
reverse during the playback
mode.
18. VIDEO/TV button (DVD/VCR)
Press to selectVIDEO or TV
position.
6. REC/OTR button (DVD/VCR)
Press once to start a record-
ing. Press repeatedly to start
Or during playback is paused,
press to play forward step by step.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Installing batteries in the remote control Using a remote control
Install two AA batteries (supplied) matching the
polarity indicated inside battery compartment of the
remote control.
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor on the
unit.
1
3
2
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
Note
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of battery together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery com-
partment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction's rules that apply in your country
or area.
Within about
23feet (7m)
60˚
Remote
R
E
C
P
A
U
SE
k
control
RE
V
h
H
SK
IP
PL
B
A
Y
T
OR
O
P
ST
OP
G
IG
M
C
IN EN
AL U/
FW
g
D
K
EN
P
LA EN
U
IS
M
TE
R
Y
L
T
• Do not recharge, short-circuit, heat, burn or disas-
semble batteries.
VCR/DVD recorder Switching
Because this product is a combination of aVCR and a DVD recorder, you must select first which com-
ponent you wish to operate with the SELECT button.
SELECT button
VCR MODE
OPEN/CLOSE
Press theVCR button on the remote control.
(Verify that theVCR SELECT indicator is lit.)
REW
F
.FWD STOP/EJECT PLA
Y
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
RECORD
POWER
OPEN/CLOSE
POWER
REC SPEED AUDIO
VCR
SELECT
DVD
S-VIDEO
VIDEO
L
-
AUDIO
-
R
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DVD MODE
VCR button
DVD button
DISPLAY
VCR
DVD
PAUSE
Press the DVD button on the remote control.
(Verify that the DVD SELECT indicator is lit.)
PLAY
STOP
VCR
DVD
SELECT
REC/OTR
SETUP
TIMER PROG.
DVD SELECT
indicator
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
VCR SELECT
indicator
Note
CM SKIP
MODE
• Pressing only the SELECT button on the
front panel DOES NOT switch the mode of
the remote control.You MUST select the
correct mode on the remote control.
• Pressing the SETUP or theTIMER PROG.
button switches the unit to the DVD
mode.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Guide to On Screen Menu
The unit uses the following types of display for most operations. SETUP/DISC/CD menu,Title list, and DIS-
PLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some disc
information for checking the status of the disc.
SETUP/DISC/CD menu
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing K / L /
{ / B buttons.Then, press ENTER button to display each menu.
These provides entries to all main functions of the unit.
“DISC” is available only when a DVD-R/RW
disc is inserted into the unit. When playing
back a DVD-Video disc (commercially avail-
“CD” is available only when
an Audio CD disc or a CD-
R/RW disc with MP3 files is
“SETUP” is available only in
the Stop mode.
able), a new DVD-R disc or the finalized DVD- inserted into the unit.
R disc, you cannot select “DISC”.
Setup Menu
Setup
Disc Setting
CD Playback Mode
CD Playback Mode
Disc
Edit
Random Play
Program Play
Format
Finalize
1
2
5
3
6
Disc Protect OFF ON
1 2 3 4
1 2
4
Playback Setting
1. Playback:
1. Edit:
1. Random Play:
To set up the unit to play discs as
you prefer.
2. Recording:
To set up the unit to record to
discs or tapes as you prefer.
3. Display:
Turns on a title list, (when a disc
withVR mode is inserted,
'Original' or 'PlayList' is available),
which shows the recorded titles
on the disc.
To set the random play program-
ming.
2. Program Play(Audio CD
only):
To set the program playing.
2. Format:
To set up the OSD screen as you
prefer.
4. SelectVideo:
To choose a line input to record
to DVD discs from other video
equipment.
Allows you to erase all of the
recorded content on the disc.
The disc will be completely blank.
3. Finalize:
Allows you to finalize a disc
recorded titles.
5. Clock:
To set up the clock of the unit as
you need.
4. Disc Protect (VR mode
only) :
Allows you to protect a disc from
accidental editing or recording.
6. Channel:
To make the channel setting of
the unit as you prefer.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
DISPLAY menu
1. Indicates a disc type and a
format mode.
Note:
: Search
DVD mode
DVD
: Audio
First:
In some descriptions on this
manual, only one disc type is
indicated as an example.
2. Indicates a recording mode
and possible recording time
left.
: Subtitle
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
: Angle (exceptVR mode)
: Repeat
: Marker
: Noise Reduction
: Zoom
3. Indicates a current channel
number.
Details are on page 41.
4. Indicates a title number, chap-
ter number, and the time
elapsed of disc play.
5. Each icon means:
2
4
1
DVD-RW
1
1
00:00:00
Video mode
SP 1:25 Rem.
CH 1
5
3
VCR mode
1. Playback status of the current
tape.
VCR
First:
2. Indicates a current channel
number and an audio status of
the program.
Press DISPLAY button to call up
the display menu.
3. Indicates a recording speed
only five seconds.
1
2
4. Indicates a Tape Counter.
5. Audio status of the current
tape.
CH21
SP
0:00:00
HIFI
3
4
5
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
Functional overview (cont’d)
Guide to Displays on the front panel
4
2
1
6
3
5
1. Current status of the unit
: Appears when a disc or a
tape play is paused.
: Appears when playing a
disc or a tape.
2. Disc type and Current
3. Recording speed
Indicates the recording speed of
the disc.
4. Title/Track and Chapter
mark
status of the unit
:
Appears when an audio CD
or a disc with MP3 files is
inserted in the disc tray.
Appears when a DVD disc
is inserted in the disc tray.
Appears when the timer
recording is proceeding in
DVD.
: Appears when the timer
programming has been
set and is proceeding.
: Appears during recording
process.
:
: Appears when indicating
a title/track number.
: Appears when indicating
a chapter number.
:
Appears when DVD is in
the timer recording stand-
by mode.
5. Displays the following
• Playing time / remaining time
• Current title / chapter / track
number
• Recording time
• Clock
• Channel number
Appears during repeat
play.
:
:
Appears when a tape is in
the unit.
Appears when a DVD-R disc
is inserted in the disc tray.
:
Appears when a DVD-
RW disc is inserted in
the disc tray.
Appears when the timer
recording is proceeding in
VCR.
• VCR tape counter
• OTR remaining time
:
6.
: Appears in the after-
noon with the clock
displaying.
Appears whenVCR is in
the timer recording stand-
by mode.
:
Appears duringVCR to DVD
duplication process.
:
Appears during DVD toVCR
duplication process.
1. Appears when the disc tray is
Display message
opening.
1
3
4
2. Appears when the disc tray is
closing.
3. Appears when a disc is loading
in the disc tray.
2
4. Appears when recording data
is writing on to the disc.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to aTV
Antenna
Antenna
(Back ofTV)
Cable
Signal
Cable
Signal
(Back ofTV)
3
or
or
Connect
RF Cable
(supplied)
1
DVD
AUDIO S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT OUT
AUDIO IN AUDIO OUT ANTENNA
Disconnect
IN
Y
L
L
L
CB
R
R
COAXIAL
IN
VIDEO IN VIDEO OUT
OUT
2
R
CR
OUT
Connect
(Back of this unit)
4
Plug in the AC power cord of this unit.
Make one of the following connections, depending on the capabilities of your existing equipment.
Method 1
Method 2
Method 3
Good picture
Basic Audio
Better picture
Best picture
TV
COMPONENT
AUDIO IN
VIDEO IN
VIDEO IN
S-VIDEO IN
Y
CB
CR
Video
cable
(supplied)
Audio cable
(supplied)
S-Video
cable
(commercially
Component
Video cables
(commercially
available)
available)
This unit
DVD
COMPONENT
DVD
DVD/VCR
DVD/VCR
VIDEO OUT
AUDIO OUT
S-VIDEO
Y
L
DVD
S-VIDEO
DVD/VCR
COMPONENT
VIDEO OUT
AUDIO
OUT
AUDIO IN AUDIO OUT ANTENNA
IN
Y
L
L
C
B
R
R
L
C
B
R
R
R
IN
VIDEO IN VIDEO OUT
OUT
R
C
VIDEO OUT
OUT
C
OUT
or
DVD
COMPONENTVIDEO OUT
VIDEO OUT
S-VIDEO OUT
AUDIO
OUT
DVD
AUDIO S-VIDEO
COMPONENT
VIDEO OUT
DIGITAL
AUDIO OUT OUT
Y
L
L
C
B
R
COAXIAL
IN
R
C
OUT
R
•
These jacks are
useful only in DVD
mode.
AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to aVCR, pictures may be distorted
due to the copy protection system.
• Method 2 and method 3 are only useful in DVD mode.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to a cable box or satellite box
(Back of this unit)
Connection A
(Cable box or
Satellite box)
OUT
DVD/VCR
ANTENNA
IN
IN
OUT
E
RF Cable
Cable
Signal
(supplied)
(Back ofTV)
Select this connection when you want to view or record a scrambled channel.With this connection, channels
cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable
box or the satellite box.
• While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1) Turn on this unit by pressing POWER button.The “POWER” indicator on the front panel will appear.
Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of
the cable box or satellite box).
• If noise appears on the TV screen, pressVIDEO/TV button on the remote control.
• If you use the channel 4, you need to change this unit’s RF output to channel 4. Refer to “RF converter
output” on page 100.
2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3) At the cable box or satellite box, select the channel you want to view or record.
(Back of this unit)
Connection B
DVD/VCR
ANTENNA
IN
(Cable box or
Satellite box)
Cable
Signal
OUT
E
IN
OUT
(Back ofTV)
RF Cable
RF Cable (supplied)
Select this connection when you want to change channels on this unit.With this connection, you may watch
one channel while recording another.
•You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output chan-
nel.)
• Refer to “RF converter output” on page 100.
2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.
3) Turn on this unit by pressing POWER button. The “POWER” indicator on the front panel will appear.
Then, select the channel you want to view or record.
• If noise appears on the TV screen, pressVIDEO/TV button on the remote control.
To playback a DVD disc or a tape
Before trying to playback DVD or tape, you MUST follow the steps 1) to 2) above.
• Refer to “Playback” on pages 44-45, 94.
To view one channel while recording another
1) While you are recording on this unit, pressVIDEO/TV button.
2) At the cable box or satellite box, select the channel you want to view.
Note to the Cable TV System Installer :
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the
cable ground shall be connected to the grounding system of the building, as close to the point of cable
entry as possible.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to an Audio System
• When you change the connections, all devices should be turned off.
• Refer to each owner’s manual for further information on other devices.
Method 1
Method 2
Stereo system
Dolby Digital decoder,
MD deck or DAT deck
Analog audio
input jacks
AUDIO
COAXIAL
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
This unit
DVD
DVD/VCR
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
AUDIO OUT
L
AUDIO OUT
R
COAXIAL
or
DVD
AUDIO
OUT
L
R
(usefull only in
DVD mode)
Note
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder, and set “Dolby Digital”
to “Stream” for the “Digital Out” setting in the
SETUP menu. (Refer to pages 90-91.)
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set
“Dolby Digital” to “PCM” for the “Digital Out” set-
ting in the SETUP menu. Playing a DVD using incor-
rect settings may generate noise distortion, and may
also damage the speakers. (Refer to pages 90-91.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 90-91.)
• By hooking this unit up to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital 5.1 channel surround sound as heard in the
movie theaters.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Easy DVD recording
The following will help you to understand easily how to record to DVD discs.
Note:
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.
Step 1: Choose a disc type
Step 2:
Insert a blank
disc
Step 3:
There are several types of recordable
DVD discs to choose from. Choose a
recordable DVD disc type based on
your playing/recording/editing require-
ments. See “DVD disc type” below.
This unit can record on the follow-
ing type of discs only.
Select the
Recording speed
Turn on the unit
1
2
3
To select the DVD
mode
1
Open the disc tray
Close the disc tray
To select the record-
ing speed
2
Remote Control
(or)
1
2
2
/CLOSE
POWER
OPEN/CLOSE
POWER
REC SPEED
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
.@/:
1
ABC
2
DEF
3
* This unit cannot record on the fol-
lowing discs.
• DVD-R GeneralVer 2.0 / 8x
• DVD-RWVer 1.2 / 2-4x CPRM com-
patible
For example, when you want to
record repeatedly on the same
disc, or when you want to edit the
disc after recording, select the
rewritable DVD-RW type disc.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
1
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
SP 2:01 Rem.
Loading
When you want to save recordings
without any alteration, a non-
rewritable DVD-R can be your
choice.
This operation
may take a while
to be recognized.
DVD disc types
Format the disc
Insert the disc in the unit.
Then, format the disc from
SETUP menu.Video format
(Video mode) orVideo
recording format (VR mode)
will be available depending on
the disc type inserted.
This is necessary to pre-
pare the disc for record-
ing. Details are on pages
28-30.
*When you format, the entire
contents on that disc will be
erased.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Easy DVD recording (Cont’d)
Step 4:
Select the
desired channel
Step 5:
Step 6:
Record to DVD
discs
Stop the Record
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SPACE
0
SLOW
1
2
3
CH
GHI
4
JKL
5
MNO
6
DISPLAY
VCR
DVD
PAUSE
OPEN/CLOSE
POWER
REC SPEED AUDIO
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
PLAY
.@/:
1
ABC
2
DEF
3
SPACE
0
STOP
CH
GHI
4
JKL
5
MNO
6
DISPLAY
VCR
DVD
PAUSE
REC/OTR
SETUP
TIME
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
ENTER
REC MONITOR
PLA
SPACE
0
DISPLAY
VCR
DVD
PAUSE
REC/OT
SETUP
TIMER PROG.
RETURN
58%
Writing to Disc
ENTER
REC MONITOR
PLAY
MENU/LIST TOP MENU
STOP
CH 1
This operation may take
a while to be completed.
I
Hint 1: Play the recorded contents
You can select the title you want to play from a displayed menu,
and immediately start to play. Recorded contents are very accessi-
ble on a disc, the procedure is simple really as you choose a title
on a chapter from the menu screen.
Start Rec.
Stop/Start
Stop Rec.
Title 1
Title 2
What are titles and chapters?
The contents of DVD disc are generally divided into titles.Titles
may be further subdivided into chapters.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Hint 2: Edit the recorded disc
You will find editing discs very easy.This unit offers convenient edit functions, which are possible only with
DVD-R/RW discs.
You can edit the following from a title list.
• Putting names on titles
• Setting pictures for thumbnails (VR mode)
• Setting/clearing chapter markers
• Deleting parts of titles (VR mode)
Title Delete :This deletes an entire scene permanently from the disc.
Scene Delete :This allows a user to edit within a specific scene (ex. commercials).
Original and Playlist (VR mode)
You can edit the recordings in Playlist without changing the original recordings.Any Playlist does not take
up much disc space.
What “Original” or “Playlist” is for?
Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on the disc.
• Playlist content refers to the edited version of the disc; how the Original content is to be played.
Finalizing a Disc
• This will permit a disc that is recorded on our unit to be played back on a different DVD
player- without finalization it will not be playable on another player.
•
After finalizing a disc if the recording was in video mode, you can not edit any information that
is on that disc.
• If you have recorded inVR mode on DVD-RW disc then editing is still permitted after finalizing.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Channel setting
All channels are stored in the unit
when purchased.We recommend
that you program available chan-
nels in your area using “Auto
Preset” in the Channel Preset of
the SETUP menu.
4
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select SETUP using { /
B
1
.@/:
1
ABC
2
DEF
3
buttons, then press ENTER
button.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SETUP menu will appear.
SPACE
0
Getting channels auto-
matically
DISPLAY
VCR
DVD
PAUSE
Setup
PLAY
STOP
1
3
7
REC/OTR
SETUP
TIMER PROG.
Press POWER button to turn
on the unit.
ENTER
SKIP
REC MONITOR
Playback Setting
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
2
CM SKIP
MODE
5
Turn theTV on and be sure
to select the input to which
the unit is connected.
Select “Channel” using K /
L
/
{ / B buttons, then press
To select a channel
ENTER button.
You can select a channel by
Channel Preset menu will appear.
directly entering channel using
the Number buttons on the
remote control.
Setup > Channel Preset VCR DVD
Auto Preset
Notes for using the
Number buttons:
Manual Preset
TV Audio Select
Stereo
• When selecting cable channels
which are higher than 99,
enter channel numbers as a
three-digit number.(For exam-
ple: 117, press 1,1,7)
•You must precede single-digit
channel numbers with a zero
(For example: 02, 03, 04 and
so on).
6
3
Select “Auto Preset” using
K
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
/
L buttons, then press
ENTER button.
The unit will start getting chan-
nels available in your area.
•
You can select the line input
mode (“L1” or “L2”).To select
“L1” by pressing [0],[0],[1].To
select “L2” by pressing
CH 18
[0],[0],[2].Details are on page 38.
Auto Presetting Now
Note
• If the auto presetting is can-
celled during presetting, some
channels not yet preset may
not be received.
Setup Menu
• The selection will depend on
how you receive the TV chan-
nels.
To cancel the auto preset-
ting during scanning:
Press RETURN button or
SETUP button to cancel.
7
Press SETUP button to exit.
•You can select only the channels
memorized in this unit by using
the CHANNEL buttons.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Channel setting (cont’d)
Adding/deleting channels
4
The channels you no longer
Select “Manual Preset” using
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
OPEN/CLOSE
POWER
REC SPEED AUDIO
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Setup > Channel Preset > Manual Preset
1
SPACE
0
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
DISPLAY
VCR
DVD
PAUSE
CH2
Add
Delete
PLAY
STOP
1
7
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
5
CM SKIP
MODE
Select the channel number to
add or delete.
Setup Menu
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
2
Select SETUP using { /
B
Setup > Channel Preset > Manual Preset
buttons, then press ENTER
button.
SETUP menu will appear.
CH18
Add
Delete
Setup
6
Playback Setting
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
3
The channel number will be
added or deleted from the chan-
nel memory.Then a next channel
number will appear so that you
can continue adding or deleting
channels.
Select “Channel” using K /
L
/
{ / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset VCR DVD
Auto Preset
Manual Preset
7
TV Audio Select
Stereo
Press SETUP button to exit.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Selecting theTV stereo or SAP
You can select a sound channel to
output from TV. “Stereo” has
been selected as the default.
4
Select “TV Audio Select”
OPEN/CLOSE
POWER
REC SPEED AUDIO
using K / L buttons, then
press ENTER button.
Option window will appear.
1
.@/:
1
ABC
2
DEF
3
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Setup > Channel Preset VCR DVD
SPACE
0
Auto Preset
DISPLAY
VCR
DVD
PAUSE
Manual Preset
TV Audio Select
Stereo
SAP
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
1
6
ENTER
SKIP
REC MONITOR
2
3
4
5
MENU/LIST TOP MENU
RETURN
SKIP
Setup Menu
CLEAR/C-RESET ZOOM
SEARCH
5
CM SKIP
MODE
Select “Stereo” or “SAP”
using K / L buttons, then
press ENTER button.
2
Select SETUP using { /
buttons, then press ENTER
button.
B
Stereo:
Outputs main-audio.
SAP:
SETUP menu will appear.
(Secondary Audio Program)
Outputs sub-audio.
Refer to the item in “Glossary”
on page 102 for more informa-
tion.
Setup
Playback Setting
6
Press SETUP button to exit.
Notes onTV channel audio
• When you record a TV program which has Stereo and Secondary
Audio Programs on a DVD-RW/R or a tape, you have to select the
TV channel audio (Stereo or SAP) beforehand. Only the selected
channel audio will be recorded. Refer to the following table to
check an appropriate setting.
3
Select “Channel” using K /
L
/
{ / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Selected
Broadcast
Disc/tape
Audio
Setup > Channel Preset VCR DVD
audio
audio
recording
output
Auto Preset
Stereo
SAP
STEREO+SAP STEREO
STEREO
MONO+SAP
MONO
STEREO+SAP SAP
STEREO
STEREO
MONO
MONO
SAP
Manual Preset
TV Audio Select
Stereo
STEREO
MONO
MONO
STEREO
MONO+SAP
MONO
STEREO
SAP
MONO
STEREO
SAP
MONO
• As can be seen in the above table, if your TV channel audio is set to
SAP and the recorded TV program has Stereo and Secondary Audio
Programs, you can only view the program in the sub-audio.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Clock setting
Set the clock before you try the
timer recording. If a Public
Broadcasting Station (PBS) is available
in your area, follow Auto Clock
Setting below. If not, follow Manual
Clock Setting on pages 22-23.
4
Select “Auto Clock Setting”
using K / L buttons, then
press ENTER button.
OPEN/CLOSE
POWER
REC SPEED AUDIO
7
.@/:
1
ABC
2
DEF
3
Option window will appear.
CH
GHI
4
JKL
5
MNO
6
Auto Clock Setting
Make sure
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
VCR DVD
Setup > Clock
SPACE
0
• The antenna/cable TV connec-
tions are correct.
• If this unit is connected to a
Cable Box or Satellite Box, select
the local PBS station on them to
set the clock automatically.
Clock Setting
OFF
DISPLAY
VCR
DVD
PAUSE
Auto Clock Setting
Auto
Daylight Saving Time
Manual
PLAY
STOP
1
6
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
3
4
5
1
MENU/LIST TOP MENU
RETURN
SKIP
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
CLEAR/C-RESET ZOOM
SEARCH
5
CM SKIP
MODE
• If you do not know your
PBS channel number, select
“Auto” using K / L buttons,
then press ENTER button.
• If you know your PBS chan-
nel number, select “Manual”
using K / L buttons, then
press ENTER button.
Setup Menu
VCR DVD
Setup > Clock
Clock Setting
OFF
Set Channel No.
Auto Clock Setting
2
CH1
Daylight Saving Time
Manual
Select SETUP using { /
B
but-
tons, then press ENTER button.
SETUP menu will appear.
Setup
Enter your PBS channel
number using Number or
K
/
L buttons, then press
ENTER button.
Playback Setting
6
Note
Press SETUP button to exit.
• The clock may set itself auto-
matically after you connect the
antenna/cable signal to this
unit and plug in the power
cord. In this case, the current
time will appear on the display
of the front panel.
• If the current time is not dis-
played or the displayed clock
is not correct, set the clock
manually.
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
7
Press POWER button to turn
off the unit.
Clock menu will appear.
This unit will search for the time
only when the power is off. Leave
it off for several minutes to give
this unit time to set the clock on
the display of the front panel.
Setup > Clock
VCR DVD
Clock Setting
Auto Clock Setting
Daylight Saving Time
Auto
ON
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Clock setting (cont’d)
Manual Clock Setting
4
Select “Clock Setting” using
1
OPEN/CLOSE
POWER
REC SPEED AUDIO
K / L buttons, then press
ENTER button.
A clock setting window will
appear.
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
VCR DVD
Setup > Clock
DISPLAY
VCR
DVD
PAUSE
Clock Setting
Auto Clock Setting
Auto
ON
Daylight Saving Time
PLAY
- - - / - - / - - - - ( - - - )
- - : - -
STOP
1
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
Setup Menu
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
Press ENTER button again.
Default date will appear.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
2
Select SETUP using { /
B
5
buttons, then press ENTER
button.
SETUP menu will appear.
Enter the date (month / day /
year) using K / L buttons.
Press { / B buttons to move
the cursor.
Setup
VCR DVD
Setup > Clock
Clock Setting
Auto Clock Setting
Auto
ON
Daylight Saving Time
JAN / 12 / 2004 (MON)
12 : 00AM
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
6
Enter the time (hour /
minute) using K / L buttons.
Press { / B buttons to move
the cursor.
Clock menu will appear.
Setup > Clock
VCR DVD
Clock Setting
Auto Clock Setting
Daylight Saving Time
Auto
ON
VCR DVD
Setup > Clock
Clock Setting
Auto Clock Setting
Auto
ON
Daylight Saving Time
JAN / 12 / 2004 (MON)
09 : 24 AM
Note
•
Your clock setting will be lost if
either there is a power failure
or this unit has been unplugged
for more than 30 seconds
when you set the clock manu-
ally.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Clock setting (cont’d)
7
8
Press SETUP button to exit.
Although seconds are not displayed,
they begin counting from zero.
Press K / L buttons to select
AM or PM, then press ENTER
button.
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
Clock menu will appear, then the
settings will be activated.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
Setup > Clock
VCR DVD
DISPLAY
VCR
DVD
PAUSE
Clock Setting
Auto Clock Setting
Daylight Saving Time
Auto
ON
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
8
ENTER
SKIP
REC MONITOR
7
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
When “Auto Clock Setting” is selected to “Auto” or
“Manual”, change it to “OFF” as following steps.
Repeat steps (1) to (3) in “Manual Clock Setting”.
STOP
REC/OTR
SETUP
TIMER PROG.
6
ENTER
SKIP
REC MONITOR
4
5
4
5
MENU/LIST TOP MENU
RETURN
SKIP
Select “Auto Clock Setting”
Select “OFF” using K / L
buttons, then press ENTER
button.
CLEAR/C-RESET ZOOM
SEARCH
using K / L buttons, then
press ENTER button.
CM SKIP
MODE
Option window will appear.
6
VCR DVD
Setup > Clock
Clock Setting
OFF
Press SETUP button to exit.
Auto Clock Setting
Auto
Daylight Saving Time
Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Clock setting (cont’d)
Setting the daylight sav-
ing time
4
When Daylight Saving Time is
ON, the unit clock will automati-
cally move forward one hour on
the first Sunday in April and move
back one hour on the last Sunday
in October.
Select “Daylight Saving
OPEN/CLOSE
POWER
REC SPEED AUDIO
Time” using K / L buttons,
then press ENTER button.
Daylight Saving Time options will
appear.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
VCR DVD
Setup > Clock
DISPLAY
VCR
DVD
PAUSE
Clock Setting
1
Auto Clock Setting
Auto
ON
Daylight Saving Time
PLAY
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
OFF
STOP
1
6
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
3
4
5
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
5
Select “ON” or “OFF” using
K / L buttons, then press
ENTER button.
Choose “ON” when currently
observing the daylight saving time.
Setup Menu
2
6
Select SETUP using { /
B
Press SETUP button to exit.
buttons, then press ENTER
button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Clock” using K / L /
{ / B buttons, then press
ENTER button.
Clock menu will appear.
Setup > Clock
VCR DVD
Clock Setting
Auto Clock Setting
Daylight Saving Time
Auto
ON
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Selecting theTV aspect ratio
You can select the TV aspect ratio
Playback menu will appear.
to match the formats of what you
are playing with the unit and your
TV screen (4:3 standard or 16:9
widescreen TV).
“4:3 Letter Box” has been select-
ed as the default.
DVD
Setup > Playback
TV Aspect
4:3 Letter Box
All
Parental Lock
OPEN/CLOSE
POWER
REC SPEED AUDIO
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Dynamic Range Control
Fast Forward with Audio
ON
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
OFF
SPACE
0
1
DISPLAY
VCR
DVD
PAUSE
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
PLAY
Select “TV Aspect” using K /
L buttons, then press ENTER
button.
STOP
REC/OTR
SETUP
TIMER PROG.
1
6
ENTER
SKIP
REC MONITOR
2
3
4
5
Option window will appear.
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
DVD
Setup > Playback
CM SKIP
MODE
TV Aspect
4:3 Letter Box
Parental Lock
4:3 Pan & Scan
16:9 Wide
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Original
OFF
Setup Menu
Dynamic Range Control
Fast Forward with Audio
ON
OFF
2
Refer to the Note on this
page.
Select SETUP using { /
B
buttons, then press ENTER
button.
5
SETUP menu will appear.
Select a desired option using
K / L buttons, then press
ENTER button.
Setup
6
Press SETUP button to exit.
Playback Setting
3
Select “Playback” using K /
L
/
{ / B buttons, then press
ENTER button.
Note
If you have a standardTV:
Select “4:3 Letter Box”, so that
black bars appear on the top
and bottom of the screen.
Select “4:3 Pan & Scan” for a
full height picture with both
sides trimmed.
If you have a widescreenTV:
Select “16:9 Wide”.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Information on DVD recording
Information
Recording speed
You can select a recording speed among 6 options,
and the recording time will depend on the record-
ing speed you select as follows.
This unit can record to DVD-R and DVD-RW discs.
When recording, you will need to select a recording
format betweenVideo mode andVR mode depend-
ing on the disc format.The disc format for DVD-R
is always “Video format,” so a recording format will
be “Video mode”.
On the other hand, when recording to DVD-RW, a
recording format will be “Video mode” or “VR
mode” because a disc format is available between
“Video Recording format” and “Video format” for
DVD-RW.
Recording Recording
Video/Sound Quality
speed
time *
XP (1H)
60 min
SP (2H)
LP (4H)
EP (6H)
120 min
240 min
360 min
Logo
Attributes
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB)
SLP (8H) 480 min
DVD-RW
SEP (10H) 600 min
12cm, single-sided, single layer disc
Approx. max. recording time (SEP mode):
600 minutes (4.7GB)
*This table is designed for a new single-sided 12cm
disc as the standard.The recording time are esti-
mates and actual recording time may differ.
*The audio and video quality is getting poorer as
the recording time becomes longer.
DVD-R
This unit cannot record on the following discs.
• DVD-R GeneralVer 2.0/8x
• DVD-RWVer 1.2/2-4x CPRM compatible
Restrictions on recording
AboutVideo mode andVR (Video Recording)
mode
You cannot record copy-protected video using this
unit. Copy-protected video includes DVD-Video
discs and some satellite broadcasts.
If copy-protected material is encountered during a
recording, recording will pause or stop automatically
and an error message will be displayed on-screen.
Video that is “copy-once only” can only be recorded
using a DVD-RW disc inVR mode with CPRM (see
below).
Video mode is the same recording format as DVD-
Video discs purchased locally, so that you can play in
most DVD players.To play in other DVD players,
you will need to finalize (see page 41). Unless final-
ized, you can play, record additionally or edit discs
recorded inVideo mode with this unit.
VR (Video Recording) mode is a basic recording
format for DVD-RW.You can record and edit
repeatedly.
When recording a TV broadcast or through an
external input, you can display copy control informa-
tion on screen.
DVD players with
are capable of playing
DVD-RW recorded inVR mode.
What is “CPRM”?
CPRM is a copy protection system with scram-
ble system regarding the recording of “copy
once” broadcast programs. CPRM stands for
Content Protection for Recordable Media.
This unit is CPRM compatible, which means
that you can record copy-once broadcast pro-
grams, but you cannot then make a copy of
those recordings. CPRM recordings can only be
made on DVD-RW discs formatted inVR
mode, and CPRM recordings can only be played
on players that are specifically compatible with
CPRM.
Disc type Disc format Functions
Video mode
Video
Playing, limited recording,
limited editing
DVD-RW
VR mode
VR
Playing, recording,
Original/Playlist editing
DVD-RW
DVD-RW
Video mode
Playing, limited recording,
limited editing
DVD-R
DVD-R
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Information on DVD recording (cont’d)
Information on copy control
Making discs playable in other DVD
player (Finalize)
Some satellite broadcasts include copy-protected
information. For recording these, refer to the fol-
lowing.
After recording, you must finalize a disc in order to
play on any other unit. (Refer to page 44.)
Copy-
prohibited
Disc type / format
Copy-free Copy-once
Playable
ver.1.1
VR
DVD-RW
OPEN/CLOSE
REW
F
.
F
W
D
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
RECORD
POWER
ver.1.1 CPRM compatible
VCR
SELECT
DVD
S-VIDEO
VIDEO
L
-
AUDIO
-
R
ver.1.1
This Unit
DVD player
Video
DVD-RW
ver.1.1 CPRM compatible
Not Playable
ver.2.0
DVD-R
Recordable
Not Recordable
After finalizing:
• Once DVD-R/RW (Video mode) is finalized, you
cannot record additionally or edit.
• Even if DVD-RW (VR mode) is finalized, you can
record additionally to or edit.
• When DVD-R/RW (Video mode) is finalized, title
menu will be created automatically.
Note
• The audio and video quality gets poorer as the
Recording time becomes longer.
•
This unit cannot record CD-R or CD-RW discs.
• DVD-R/RW and CD-R/RW discs recorded on a
personal computer or a DVD or CD recorder
may not play if the disc is damaged or dirty or if
there is dirt or condensation on the unit’s lens.
• If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play because
of the settings of the application software used
to create the disc. (Check with the software pub-
lisher for more detailed information.)
To play in other DVD players, finalize discs record-
ed on this unit with the following condition.
Disc type
Mode
DVD-R
ver.2.0
Video mode
DVD-RW
Video mode
VR mode
ver.1.1
ver.1.1 CPRM compatible
• Discs recorded inVideo mode on this unit can-
not record additionally using other DVD
recorders.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Formatting a disc
Settings for the recording format to a blank disc
Video
DVD-RW
VR
DVD-RW
3
When inserting a blank disc, the
unit starts to initialize the blank
disc.
After that,You can record to the
disc with the recording format
selected in SETUP menu.
You are allowed to set a specified
time for chapter marks.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Recording menu will appear.
SPACE
0
DVD
Setup > Recording
DISPLAY
VCR
DVD
PAUSE
DVD-RW Recording Format
Auto Chapter
Video mode
10 minutes
PLAY
Timer Programming
Dubbing Mode
VCR DVD
STOP
1
REC/OTR
SETUP
TIMER PROG.
1
ENTER
SKIP
REC MONITOR
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
2
3
4
5
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
Select “DVD-RW Recording
Format” using K / L buttons,
then press ENTER button.
Option window will appear.
DVD
Setup > Recording
Setup Menu
Video mode
DVD-RW Recording Form
Auto Chapter
VR mode
Timer Programming
Dubbing Mode
VCR DVD
2
Video mode
DVD Player Compatibility mode.
VR mode
Select SETUP using { /
B
Editing possibility mode.
buttons, then press ENTER
button.
SETUP menu will appear.
Note
Video mode has been selected as
the default.
• The recording format setting
is effective only for DVD-RW
discs.You cannot change the
recording format on a DVD-R
disc. DVD-R discs will always
be inVideo mode.
Setup
5
Select “Video mode” or “VR
mode” using K / L buttons,
then press ENTER button.
The recording mode will be set.
•
You cannot mix two for-
mats on one DVD-RW disc.
When you load a disc once
recording before, the
Playback Setting
recording format cannot be
changed even if you change
it in SETUP menu.
• When inserting a blank
DVD+R or DVD+RW disc,
the error message ("Disc
Error") will appear.This unit is
not compatible with a
DVD+R/RW disc.
• PLAYLIST will be created
automatically when recording
on DVD-RW inVR mode.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Formatting a disc (cont’d)
6
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Auto Chapter” using
.@/:
1
ABC
2
DEF
3
K / L buttons, then press
ENTER button.
CH
GHI
4
JKL
5
MNO
6
Option window will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DVD
Setup > Recording
DISPLAY
VCR
DVD
PAUSE
DVD-RW Recording Forma
Auto Chapter
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Timer Programming
Dubbing Mode
PLAY
STOP
60 minutes
REC/OTR
SETUP
TIMER PROG.
8
ENTER
SKIP
REC MONITOR
6
7
MENU/LIST TOP MENU
RETURN
SKIP
“10 minutes” has been selected as
the default.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
7
Select a desired time option
using K / L buttons, then
press ENTER button.
Chapter marks will be put as you
specified.
8
Press SETUP button to exit
SETUP menu.
Note
• The time for chapter marks is
not accurate inVideo mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Formatting a disc (cont’d)
Reformatting a disc
Video
DVD-RW
VR
DVD-RW
4
If you are using a DVD-RW disc,
by default it will beVideo mode.
You can change this toVR mode
from SETUP menu.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Option window will appear.
SPACE
0
1
Disc
DISPLAY
VCR
DVD
PAUSE
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Edit
Format
PLAY
Finalize
Disc Protect OFF ON
STOP
Yes
No
REC/OTR
SETUP
TIMER PROG.
Are you sure?
ENTER
SKIP
REC MONITOR
1
Yes
No
2
3
4
5
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
*VR mode only
CM SKIP
MODE
5
Setup Menu
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Formatting will start.
2
Select “DISC” using { / B but-
tons, then press ENTER button.
DISC menu will appear.
Disc
Edit
58%
Format
Formatting
Finalize
Disc Protect OFF ON
6
Formatting is complete.
*VR mode only
100% will be indicated.
3
Select “Format” using K /
L
buttons, then press ENTER
button.
Option window will appear.
100%
Formatting
Disc
Edit
This operation may take a
while to be completed.
Format
Finalize
Note
Disc Protect OFF ON
• When you reformat the disc,
the contents of the disc will
be erased.
Yes
No
• If you want to cancel format
at step 5, select “No”.
*VR mode only
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Basic recording
Video
DVD-RW
VR
DVD-RW
DVD-R
4
Follow the steps below to record
TV programs.
OPEN/CLOSE
POWER
REC SPEED AUDIO
2
4
Select a desired channel to
DVD
.@/:
1
ABC
2
DEF
3
record using CH K / L but-
tons or number buttons.
First:
CH
GHI
4
JKL
5
MNO
6
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
1
SPACE
0
Turn on the unit and load a
recordable disc.
CH 1
DISPLAY
VCR
DVD
PAUSE
5
Make sure that the TV input is set
on the unit.
PLAY
STOP
6
REC/OTR
SETUP
TIMER PROG.
This operation may take a
while to be recognized.
ENTER
SKIP
REC MONITOR
5
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
5
2
CM SKIP
MODE
Press REC/OTR button to
start recording.
Select a recording speed
using REC SPEED button.
I mark will be displayed for 5
seconds.
SP 2:01 Rem.
I
Refer to “Recording speed” on
page 26.
To pause the recording, press
Note
PAUSE F button. Press REC/OTR
button or PAUSE F button to
restart the recording.
• Recording starts immediately
and continues until the disc
becomes full or you stop
recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
3
Make sure that the recording
format is set to the desired
mode.
6
Refer to “Formatting a disc” on
pages 28-30.
Press STOP C button to stop
the recording.
When a DVD-RW disc is
loaded:
This operation may take a
while to be completed.
•
You cannot mix two for-
mats on one DVD-RW disc.
When you load a disc once
recorded before, the
You can chooseVideo mode or
VR mode from SETUP menu.
“Video mode” has been selected
as the default. Refer to “Settings
for the recording format to a
blank disc” on pages 28-29.
recording format cannot be
changed even if you change
it in SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Basic recording (cont’d)
Checking the recording picture quality
Video
DVD-RW
VR
DVD-RW
DVD-R
OPEN/CLOSE
POWER
1
REC SPEED AUDIO
2
You can confirm the recording pic-
ture quality with the recording
speed you have selected before
attempting to record to a DVD disc.
.@/:
1
ABC
2
DEF
3
Press REC MONITOR button
again to exit.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DVD
First:
DISPLAY
VCR
DVD
PAUSE
PLAY
1
STOP
While the unit is in STOP or
REC with a DVD disc to
record inserted, press REC
MONITOR button.
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
1
2
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
The TV program will be on the
screen in the recording picture
quality with the recording speed
you have selected.
CM SKIP
MODE
CH 18
Rec Monitor
XP
If you want to change the
recording speed, press REC
SPEED button repeatedly.
The recording speed will be
changed as you press the button
as shown. Refer to “Recording
speed” on page 26.
• You cannot change the record-
ing speed during recording.
XP
SP
LP
SEP
SLP
EP
Note
• You cannot check the record-
ing sound quality with the
Rec monitor function.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
One-touch timer recording
Video
DVD-RW
VR
DVD-RW
DVD-R
4
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc you
are recording onto has enough
space for the time you set.
When the recording finishes the
recorder automatically goes into
standby.
OPEN/CLOSE
POWER
REC SPEED AUDIO
2
Select a desired channel to
.@/:
1
ABC
2
DEF
3
record using CH K / L but-
tons or number buttons.
CH
GHI
4
JKL
5
MNO
6
4
5
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
5
DISPLAY
VCR
DVD
PAUSE
Press REC/OTR button, then
press REC/OTR button
repeatedly until a desired
recording time (30 minutes
to 8 hours) appears on theTV
screen.
DVD
PLAY
First:
STOP
REC/OTR
SETUP
TIMER PROG.
1
5
ENTER
SKIP
REC MONITOR
Turn on the unit and load a
recordable disc.
MENU/LIST TOP MENU
RETURN
SKIP
Recording will start.
CLEAR/C-RESET ZOOM
SEARCH
Make sure that the TV input is set
on the unit.
CM SKIP
MODE
This operation may take a
while to be recognized.
0:30
I
2
Select a recording speed
using REC SPEED button.
Refer to "Recording speed" on
page 26.
0:30
(Normal Recording) 1:00
8:00
7:30
3
When reaches the specified time,
the unit will be turned off auto-
matically.
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 28-30.
Note
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
• The unit will be turned off
automatically under the con-
ditions following.
1)No space remained on the
disc.
2)When a power failure
occurs.
• If OTR is finished in DVD
during playback or REC mode
inVCR, the DVD will be in
STOP mode and theVCR
keeps the current mode.
When a DVD-RW disc is
loaded:
This operation may take a
while to be completed.
You can chooseVideo mode or
VR mode from SETUP menu.
"Video mode" has been selected
as the default. Refer to pages 28-
29 "Settings for the recording for-
mat to a blank disc."
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timer recording
Video
DVD-RW
VR
DVD-RW
DVD-R
VCR
You can choose the timer
programming menu by press-
ing TIMER PROG. button. In
this case, continue with step 5.
4
Select “Timer Programming”
You can program the unit to record
up to 8 programs, up to a year in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
tape with a safety tab.
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
PEN/CLOSE
POWER
REC SPEED AUD
.@/:
1
ABC
2
DEF
3
Setup > Recording > Timer Programming
CH
GHI
4
JKL
5
MNO
6
DVD
Date
- - -
Start
End
CH
Speed
VCR
PQRS
7
TUV
8
WXYZ
9
IDEO/TV
SLOW
- - -
- - -
SPACE
0
1
DISPLAY
VCR
DVD
AUSE
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
5
PLAY
STOP
Select the program which is
1
REC/OTR
SETUP
TIMER PROG.
not set up using K / L but-
tons, then press ENTER but-
ton.
ENTER
SKIP
REC MONITOR
2
3
4
5
6
7
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
6
Enter the date using K /
L
buttons, then press B button.
Setup Menu
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH
Speed
VCR
2
JAN / 01 - - : - -AM - - : - -AM CH8 DVD
- - -
- - -
- - -
Select SETUP using { /
buttons, then press ENTER
button.
B
e.g. January 1st
SETUP menu will appear.
JAN/01
When pressing L button at the
current date, timer recording
mode will change as follows.
L
Setup
Daily
L
MON-SAT
L
MON-FRI
L
SAT
L
Playback Setting
FRI
L
Note
3
L
• If you have not set the
clock yet:
SUN
L
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 21 or
“Manual Clock Setting” on
page 22 before making a
timer programming.
• Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
DEC/31
Recording menu will appear.
7
DVD
Setup > Recording
Enter the time to start and
to end using K / L buttons,
then press B button.
DVD-RW Recording Format
Auto Chapter
Video mode
10 minutes
Timer Programming
Dubbing Mode
VCR DVD
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH
Speed
VCR
JAN/12 10 :00PM - - : - -AM CH8 DVD
- - -
- - -
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timer recording (cont’d)
OPEN/CLOSE
POWER
REC SPEED AUDIO
8
10
12
Select the channel number to
record using K / L buttons,
then press B button.
Select a recording speed
using K / L buttons.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH
Speed
VCR
Setup > Recording > Timer Programming
SPACE
0
JAN/12 10:00PM 10:30PM CH8 DVD 1H
- - -
DVD
Date
Start
End
CH
Speed
VCR
DISPLAY
VCR
DVD
PAUSE
JAN/12 10:00PM 10:30PM CH8 DVD
- - -
Refer to “Recording speed” on page
26 for DVD or page 94 forVCR.
To record from external input, L1
or L2.
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
11
8
9
ENTER
SKIP
REC MONITOR
Press ENTER button when all
information required is
entered.
Select a recording media
using K / L buttons, then
press B button.
9
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
10
11
CM SKIP
MODE
Your program setting will be
stored.
• To set another program, repeat
steps 5 to 11.
Setup > Recording > Timer Programming
DVD
Date
Start
End
CH
Speed
VCR
JAN/12 10:00PM 10:30PM CH8 DVD
- - -
Note
• After step 12, the unit will be
turned on automatically 2
minutes (ForVCR recording,
10 seconds) in advance of the
recording time to start and
waits to start.Then the
• To record on to a tape, selectVCR.
• To record on to a disc, select DVD.
• To exit, press SETUP button.
12
Press POWER button to turn off.
indicator will appear on the
front display.
recording will start at the
recording time you set.
Checking, canceling, or correcting the timer programming
information
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
6
.@/:
1
ABC
2
DEF
3
1
4
CH
GHI
4
JKL
5
MNO
6
Press POWER button so that
To clear the timer programming,
select your desired program
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
indicator disappear from
the front display.
using K / L buttons, then press
CLEAR/C-RESET button.
SPACE
0
DISPLAY
VCR
DVD
PAUSE
2
To correct the timer program-
ming, select your desired pro-
PressTIMER PROG. button.
PLAY
Timer Programming list will appear.
STOP
2
5
4
gram using K / L buttons, then
press ENTER button.
Next, correct the timer programming
using K/L/{/B buttons.
Finally, press ENTER button again.
REC/OTR
SETUP
TIMER PROG.
Setup > Recording > Timer Programming
ENTER
SKIP
REC MONITOR
DVD
Date
Start
End
CH
Speed
VCR
JAN/12 10:00PM 10:30PM CH8 DVD 1H
- - -
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
4
3
CM SKIP
MODE
Check the information on the
list you will need.
5
Note
PressTIMER PROG. button to exit.
• Press TIMER PROG. button to
check the timer programming
in process.
When the timer recording is
proceeding, that program will
be red highlighted. In this case,
you cannot select any other
program.
6
Press POWER button to return
to the timer standby mode.
To stop the timer recording in process
On the front panel of the main unit, press STOP C button to stop the
disc recording or STOP/EJECT
C
A to stop the tape recording. STOP
C
button on the remote control is not effective.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timer recording (cont’d)
Hints for timer recording
•
If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.
Please insert a recordable disc.
• If a tape with a record tab is not in the cassette compartment, theVCR indicator on the front panel flashes and timer
recording cannot be performed. Please insert a recordable tape.
• When all the timer recording is completed, the
indicator flashes.To play or eject the recorded disc (or the tape),
press POWER button first, and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT C A) button.
• The timer recording is not performed in DVD andVCR at the same time. If you set two programmings with the same
channel and time both in DVD andVCR, the programming that has priority will be recorded.
•
During timer recording or timer standby (
indicator is on the front display), any operations on the unit will not be
indicator disappears).
available.To make these operations available, cancel the timer recording or timer standby first (
• To cancel the timer standby mode, press POWER button.
• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc
reaches at the end during the recording, the unit turns itself off.
•
•
When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year.
If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording
standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.
• If a videotape ends during timer recording, the unit will stop, eject the videotape, and turn itself off.
• When two or more programmings are overlapped,“Overlap” will be displayed.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming set previously has priority.
A timer recording of lower priority will be canceled, start from the middle or stop on the way.
Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. B) has priority.
When the starting time is the same:
A program set previously (PROG.A) has priority.
ex.1
ex. 2
PROG.A
PROG. B
PROG.A
PROG. B
PROG. C
Actual
recording
Actual
recording
PROG.A
PROG. B
PROG.A
PROG. B
When the recording time is entirely overlapped:
PROG. A will not be recorded.
When the recording time is partially overlapped:
PROG.A will start after PROG. B is complete to be recorded.
PROG. A
PROG.A
PROG. B
PROG. B
Actual
Actual
recording
PROG. B
PROG. B
PROG.A
recording
Note for DVD timer recording
Example:
• When the recording time
of two programs are over-
lapped or the End time of
a program and the Start
time of another is the
same, the first 20-90 sec-
onds of the subsequent
program will be cut off.
When the end time of the programming currently
being recorded and the starting time of the one to be recorded
sequentially are same:
PROG.A
PROG. B
Actual
PROG.A
PROG. B
recording
The first 20-90 seconds will be cut off.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Settings for an external source
Connection to an external source
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).
S-VIDEO input is useful only in DVD mode.
Use commercially available S-Video orVideo cable and an Audio cable for this connection.
OUTPUT
VIDEO AUDIO
OUTPUT
Another source
S -VIDEO
VIDEO AUDIO
S-VIDEO
(VCR camcorder etc.)
R
L
L
R
or
or
S-Video
cable
Video
cable
Audio
cable
S-Video
cable
Video
Audio
cable
cable
DVD
S-VIDEO
DVD/VCR
AUDIO IN
L
R
or
IN
VIDEO IN
S-VIDEO
VIDEO
L
-
AUDIO
-
R
To LINE 2 IN
To LINE 1 IN
OPEN/CLOSE
DUBBING
DVD
AUDIO S-VIDEO
D/VCR
COMPONENT
VIDEO OUT
DIG
AUDIO IN DIO OUT ANTENN
AUDIO OOUT
IN
REW
F
.FWD STOP/EJECT PLA
Y
RECORD
CHANNEL
SELECT
STOP
PLAY
RECORD
POWER
Y
L
L
L
CB
R
R
COAXIAL
IN
VIDEO IN VIDEO OUT
OUT
VCR
SELECT
DVD
R
CR
OUT
S-VIDEO
VIDEO
L
-
AUDIO
-
R
Front of this unit
Rear of this unit
1. Press SETUP button to display SETUP/DISC 1. Press SETUP button to display SETUP/DISC
menu.
menu.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
2. Select “SETUP” using { / B buttons, then
press ENTER button.
3. Select “SelectVideo” using K / L / { / B but- 3. Select “SelectVideo” using K / L / { / B but-
tons, then press ENTER button.
tons, then press ENTER button.
DVD
DVD
Setup > Select Video
Setup > Select Video
L1 (Rear)
L2 (Front)
L1 (Rear)
L2 (Front)
Video In
Video In
Video In
Video In
4. Select “L2 (Front)” using K / L buttons, then 4. Select “L1 (Rear)” using K / L buttons, then
press ENTER button.
press ENTER button.
DVD
DVD
Setup > Select Video
Setup > Select Video
L1 (Rear)
L2 (Front)
L1 (Rear)
L2 (Front)
Video In
S-Video In
Video In
S-Video In
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO input, select“S-Video In”.
If you want to useVIDEO input (Composite), select
“Video In”.
5. Select the input jack type to connect using
K / L buttons, then press ENTER button.
If you want to use S-VIDEO IN, select“S-Video In”.
If you want to useVIDEO IN (Composite), select
“Video In”.
DVD
DVD
Setup > Select Video
Setup > Select Video
L1 (Rear)
L2 (Front)
L1 (Rear)
L2 (Front)
Video In
S-Video In
Video In
S-Video In
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Settings for an external source (cont’d)
Recording from an external source
Video
DVD-RW
VR
DVD-RW
DVD-R
VCR
Before recording from an external source, see the instruction for the connection on page 37.
1. Turn theTV and the unit on, and be sure to select the input
of theTV to which the unit is connected.
OPEN/CLOSE
4
1
POWER
REC SPEED AUDIO
2
7
.@/:
1
ABC
2
DEF
3
DVD
CH
GHI
4
JKL
5
MNO
6
2. When you want to record to the disc: Press:
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
SPACE
0
3
DISPLAY
VCR
DVD
PAUSE
This operation may take a while to be recognized.
VCR
PLAY
When you want to record to the tape: Press:
Insert the tape with a safety tab into the cassette compart-
ment.
STOP
REC/OTR
SETUP
TIMER PROG.
5
ENTER
SKIP
REC MONITOR
3. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select “L1” position by
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L but-
tons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 26 for DVD or page 94 forVCR.
XP
SP
LP
EP
SP
SLP
SEP
SLP
DVD mode
VCR mode
5. Press REC/OTR button on the unit to start recording.
6. Press PLAY button on the external source to record from.
7. For disc:
Press STOP C button on the unit to stop recording.
This operation may take a while to be completed.
For tape:
Press STOP/EJECT
ing.
C
A button on the unit to stop record-
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Dubbing Mode
Video
DVD-RW
VR
DVD-RW
DVD-R
VCR
2
Select SETUP using { /
B
You can copy a DVD disc to a
videotape or copy a videotape to
a DVD disc.This function will be
possible only if the DVD disc or
the tape is not copy protected.
Before starting this function, pre-
pare for the recording on the
DVD-R/RW disc or the videotape.
Refer to pages 31-32, 94.
buttons, then press ENTER
button.
SETUP menu will appear.
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Setup
SPACE
0
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
Playback Setting
1
REC/OTR
SETUP
TIMER PROG.
Make sure:
ENTER
SKIP
REC MONITOR
• Insert a disc and a tape with a
safety tab.
Note for recording to a tape:
• The tape's record tab is intact.
• The videotape is long enough to
record the DVD disc.
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
3
CLEAR/C-RESET ZOOM
SEARCH
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
CM SKIP
MODE
Recording menu will appear.
Note for recording to a disc:
• The DVD disc is satisfied with
the recording status. Refer to
pages 26-27.
DVD
Setup > Recording
DVD-RW Recording Format
Auto Chapter
Video mode
10 minutes
Timer Programming
Dubbing Mode
VCR DVD
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
4
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
Note
Setup > Recording
VCR DVD
For VCR to DVD duplication:
Setup Menu
DVD-RW Recording Format
Auto Chapter
Video mode
OFF
• After startVCR to DVD dupli-
cation, the picture may be dis-
torted because of the auto
tracking function.
Timer Programming
Dubbing Mode
VCR DVD
This in not a malfunction. Be
advised that playback the tape
until the picture is stabilized,
then set the starting point
which you wish to start
recording, and startVCR to
DVD duplication.
Instructions continue on the next page.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Dubbing Mode (cont’d)
VCR to DVD
DVD toVCR
OPEN/CLOSE
POWER
REC SPEED AUDIO
5
5
.@/:
1
ABC
2
DEF
3
Select “VCR ⇒ DVD” using
K
Select “VCR ⇐ DVD” using
K
CH
GHI
4
JKL
5
MNO
6
/
L buttons, then press
/
L buttons, then press
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
ENTER button.
ENTER button.
SPACE
0
7
DISPLAY
VCR
DVD
PAUSE
Setup > Recording
VCR DVD
Setup > Recording
VCR DVD
DVD-RW Recording Format
Auto Chapter
DVD-RW Recording Format
Auto Chapter
Video mode
OFF
Video mode
OFF
PLAY
Timer Programming
Dubbing Mode
Timer Programming
Dubbing Mode
STOP
9
5
VCRDVD
VCR DVD
VCRDVD
VCR DVD
6
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
6
6
Press SETUP button to exit
SETUP menu.
Press SETUP button to exit
SETUP menu.
Make sure to select a recording
speed using REC SPEED button.
VCR
Press:
VCR
Press:
Make sure to select a recording
speed using REC SPEED button.
7-a
7-b
DVD
Press:
7-a
OPEN/CLOSE
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
REW
F.FWD STOP/EJECT PLAY
RECORD
CHANNEL
DUBBING
SELECT
STOP
PLAY
R
POWER
7-b
VCR
SELECT
DVD
Press PLAY B button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
9-a
8
9-b
8
Press DUBBING button on
the front of the unit.
Note
8
VCR to DVD duplication will start.
• When you turn off the unit
after set the Dubbing Mode
Press DUBBING button on
the front of the unit.
DVD toVCR duplication will start.
to
, the setting
9-a
will be set to
automatically.
• Dubbing Mode is available
only if the tape or disc is not
copy protected.
• You cannot change the output
mode duringVCR to DVD or
DVD toVCR duplication.
Press STOP C button on the
unit or STOP C button on
the remote control to stop
the recording.
9-b
Press STOP/EJECT
ton on the unit or STOP
button on the remote control
to stop the recording.
C
A but-
C
For VCR to DVD duplication:
• The playback sound mode is
followed by the setting of
VCR playback sound mode on
page 96. Set the playback
sound mode to which you
wish to record to the DVD.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Finalizing the discs
1
2
3
CH
GHI
4
JKL
5
MNO
6
Video
DVD-RW
VR
DVD-RW
DVD-R
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
You will need to finalize the discs
recorded inVideo mode to play in
other DVD players.
Disc
SPACE
0
Edit
DISPLAY
VCR
DVD
PAUSE
Format
Finalize
Finalizing may take several min-
utes up to an hour. (A disc
Disc Protect OFF ON
PLAY
Yes
No
STOP
4
REC/OTR
SETUP
TIMER PROG.
recorded inVideo mode can take
up to 15 minutes.A disc recorded
inVR mode can take up to 60
minutes.) A shorter recording
period on the disc will require a
longer time period for finalization.
Do not unplug the power cord
during finalization.
ENTER
SKIP
REC MONITOR
1
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
*VR mode only
CLEAR/C-RESET ZOOM
SEARCH
4
CM SKIP
MODE
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Note
Details are on pages 26-27.
Finalizing will start.
• Finalizing discs inVideo mode
automatically create title
menus.
1
• Once you have finalized a disc
recorded inVideo mode, you
cannot edit or record any-
thing else on that disc.
Discs recorded inVR mode
can still be recorded and edit-
ed on this unit even after
finalized.
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
58%
Finalizing
To cancel finalizing, press STOP
button.
C
• When you insert a DVD-RW
disc finalized with this unit,
“Undo Finalize” will appear
instead of “Finalize”.
Do you want to cancel?
Setup Menu
Yes
No
Disc
Edit
58%
Format
2
Finalizing
Undo Finalize
Select “DISC” using { /
B
To release the finalizing for
the disc, select “Undo
Finalize” at step 3.
Select “Yes”, then press
ENTER button.
Finalizing is cancelled, then the
unit will be in stop mode.
buttons, then press ENTER
button.
DISC menu will appear.
• If
appear when pressing
STOP button at step 4, you
cannot cancel finalizing
because the finalizing has
been in certain progress.
• When selecting “No” at step
4 and press ENTER or
RETURN button, finalizing will
be continued.
Disc
Edit
5
Format
Finalize
Finalizing is complete.
Disc Protect OFF ON
• You cannot cancel finalizing
the DVD-R disc once it has
started.
*DO NOT power off during
finalizing, this will result in
malfunction.
*VR mode only
3
100%
Finalizing
Select “Finalize” using K /
buttons, then press ENTER
button.
L
This operation may take a
while to be completed.
Option window will appear.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Setting a disc to protect
VR
DVD-RW
3
To prevent accidental recording,
editing or erasing the titles, you
can protect them from DISC
menu.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Disc Protect OFF ➔
.@/:
1
ABC
2
DEF
3
ON” using K / L buttons,
then press ENTER button.
Option window will appear.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
1
Disc
DISPLAY
VCR
DVD
PAUSE
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
Edit
Format
Finalize
PLAY
Disc Protect OFF ON
STOP
Yes
No
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
1
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Setup Menu
A disc will be protected.
2
Select “DISC” using { /
B
buttons, then press ENTER
button.
DISC menu will appear.
58%
Note
Writing to Disc
Disc
• The Disc Protect setting is
available only when a disc
withVR mode is inserted.
• You can select only Disc
Protect Menu when a pro-
tected disc is inserted.
Edit
Format
This operation may take a
while to be completed.
Finalize
Disc Protect OFF ON
To cancel the disc protect:
• When you insert a disc pro-
tected with this unit,“Disc
Protect ON → OFF” will
appear instead of “OFF →
ON”.
Disc
Edit
Format
Finalize
Disc Protect ON
Yes
OFF
No
To release the protect for the
disc, select “Disc Protect ON
→ OFF” at step 3, then select
“Yes”.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Information on DVD play
Before you attempt to play DVD discs, read the following information.
Playable discs
Region codes
This unit is compatible to play the following discs.
To play a DVD, make sure that it meets the require-
ments for Region Codes and Color Systems as
described below. Discs that have the following logos
will play on the unit. Other Disc types are not guar-
anteed to play.
This unit has been designed to play DVD discs with
Region One (1). DVDs must be labeled for ALL
regions or for Region 1 in order to play on the unit.
You cannot play DVDs that are labeled for other
regions. Look for the symbols below on your DVDs.
If these region symbols do not appear on your
DVD, you cannot play the DVD in this unit.
Disc
Logo
DVDVIDEO
The number inside the globe refers to region of the
world. Region 1 represents the United States,
Canada, Bermuda, the U.S.Virgin Islands and small
regions near Australia.
DVD-RW (VIDEO/VR FORMAT)
DVD-R (VIDEO FORMAT)
A DVD labeled for a specific region can only play on
the unit with the same region code.
CD-DA (AUDIO CD)
Hint for DVD playback
The contents of DVD disc are generally divided into
titles.Titles may be further subdivided into chapters.
CD-R (CD-DA FORMAT, MP3 files)
CD-RW (CD-DA FORMAT, MP3 files)
Color systems
Start Rec.
Stop/Start
Stop Rec.
Title 1
Title 2
DVDs are recorded in different color systems
throughout the world.The most common color sys-
tems are NTSC (which is used primarily in the
United States and Canada), PAL and SECAM.
This unit uses NTSC, so DVDs you play must be
recorded in the NTSC system.You cannot play
DVDs recorded in other color system.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Guide to displays
DVD
1. Indicates a disc type and a
First:
: Search
format mode.
: Audio
2. Indicates a recording speed
and possible recording time
left.
3. Indicates a current channel
number and an audio status of
the program.
4. Indicates a title number, chap-
ter number and the time
elapsed of disc play.
Press DISPLAY button to call up
the display menu.This menu will
give you the information on the
playing disc. Some operations are
available while disc is playing.
: Subtitle
: Angle (exceptVR mode)
: Repeat
: Marker
4
1
: Noise Reduction
: Zoom
DVD-RW
1
1
00:00:00
Video mode
SP 1:25 Rem.
CH 1
2
3
5. Each icon means:
5
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback
Playback
VR mode:
Video
DVD-RW
VR
DVD-RW
DVD-R
OPEN/CLOSE
POWER
REC SPEED AUDIO
Original
2
6
1
6
.@/:
1
ABC
2
DEF
3
1
2
3
1
CH
GHI
4
JKL
5
MNO
6
JAN/1 12:00AM
4
JAN/1 1:00AM
5
JAN/1 2:00AM
Press POWER button, then
press DVD button.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
When you are playing a DVD, turn
the TV on and be sure to select
the input to which the unit is con-
nected.
JAN/1 3:00AM
JAN/1 4:00AM
DISPLAY
VCR
DVD
PAUSE
PLAY
MENU / LIST button
STOP
REC/OTR
SETUP
TIMER PROG.
Playlist
ENTER
SKIP
REC MONITOR
1
2
3
2
MENU/LIST TOP MENU
RETURN
SKIP
5
4
4
JAN/1 12:00AM
4
JAN/1 1:00AM
5
JAN/1 2:00AM
Press OPEN/CLOSE A but-
ton to open the disc tray.
The disc tray will open.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
JAN/1 3:00AM
JAN/1 4:00AM
3
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
5
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playback will start.
6
disc
tray
guide
Press STOP C button to stop
playback.
Note
• For DVD-R (Video mode)
To eject the disc, press
and DVD-RW (Video mode)
discs which are already final-
ized, a title list will be dis-
played instead of thumbnails.
This operation may take a
while to be recognized.
OPEN/CLOSE A button to open
the disc tray, then remove the disc
before turning off the unit.
4
PressTOP MENU button to
display the title menu.
You can change “Original” or
“Playlist” of VR mode using
MENU / LIST button.
Title Menu
1
2
3
4
5
6
7
8
JAN/1 12:24AM CH96 XP
Video mode:
Title List
1
2
3
• You can resume play from
where you stopped playing
the disc. (Resume play)
Refer to page 46 for details
about resume play.
JAN/1 12:00AM
4
JAN/1 1:00AM
5
JAN/1 2:00AM
JAN/1 3:00AM
JAN/1 4:00AM
• Some discs may start playing
automatically.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback (cont’d)
DVD-V
CD
MP3
4
Press PLAY B button to start
playing.
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
2
1
.@/:
1
ABC
2
DEF
3
Press POWER button, then
press DVD button.
Playback will start.
CH
GHI
4
JKL
5
MNO
6
When you are playing a DVD or
an audio CD, turn the TV on and
be sure to select the input to
which the unit is connected.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
If you are playing a DVD-Video
disc, a menu may appear.
Refer to pages 46-47 for details
about a disc menu.
SPACE
0
DISPLAY
VCR
DVD
PAUSE
PLAY
4
5
STOP
2
5
Press OPEN/CLOSE A but-
ton to open the disc tray.
The disc tray will open.
REC/OTR
SETUP
TIMER PROG.
Press STOP C button to stop
ENTER
SKIP
REC MONITOR
playing.
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
3
CM SKIP
MODE
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
Note
• Some discs may start playing
automatically.
For MP3 playback
• When selecting a folder, press
PLAY B, ENTER or B button
to go to the lower hierarchy.
• Press s button or RETURN
button to the previous hierarchy.
• Press STOP C button to return
to the first item.
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
.@/:
1
ABC
2
DEF
3
In stop mode, pressTOP MENU
button to call up the MP3 menu.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
List of MP3 Files
DISC NAME
SPACE
0
DISPLAY
VCR
DVD
PAUSE
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
PLAY
STOP
2
2
2
1
2
FILE NAME 1
FILE NAME 2
•
•
Folders are accompanied by
MP3 files are accompanied by
icon.
icon.
REC/OTR
SETUP
TIMER PROG.
1/2
ENTER
SKIP
REC MONITOR
Reproduction will start from the
selected track and go to the
next one in turn.
The system can recognize up to 255
groups (or folders) and up to 255 tracks.
The name of group and track can
be displayed in up to 32 charac-
ters. Unrecognizable characters
will be replaced with asterisks.
MENU/LIST TOP MENU
RETURN
SKIP
• To exit the menu, press TOP
MENU button again.
CLEAR/C-RESET ZOOM
SEARCH
1
CM SKIP
MODE
•
•
2
K
L
Press
/
buttons to select a
Note
desired folder (group) or track,
then press ENTER button.
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT deck.
• Files whole extension is other
than “.mp3 (MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the
• If there are no files in the folder,
“No Files” will be displayed.
When selecting track:
Playback will start.
This unit recommends the files
recorded under the following cir-
cumstances:
Sampling frequency: 44.1kHz or 48kHz.
Constant bit rate: 112kbps - 320kbps.
When selecting the folder:
The files in folder will appear.
Press K or L button to select the
track you want, then press ENTER
button.
•
•
recording status.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback (cont’d)
Playing discs using the disc menu
DVD-V
2
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the play-
back. For example, the menu may
offer choices for subtitle lan-
guages, special features, or chapter
selection.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
.@/:
1
ABC
2
DEF
3
2
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
Sometimes these are displayed
automatically when you start play-
back, otherwise only appear when
you press MENU / LIST button.
MENU / LIST button:
PLAY
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
STOP
REC/OTR
SETUP
TIMER PROG.
1
2
3
DVD
ENTER
SKIP
REC MONITOR
First:
2
MENU/LIST TOP MENU
RETURN
SKIP
K / L / { / B buttons:
Moves the cursor around screen.
CLEAR/C-RESET ZOOM
SEARCH
1
CM SKIP
MODE
Press MENU / LIST button.
The DVD main menu will appear.
Enter button:
Selects the currently highlighted
menu option.
If the feature is not available,
may appear on the TV screen.
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
button after.)
3
Press MENU / LIST button to
exit the menu.
Note
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Basic playback (cont’d)
Playing discs using the title menu
DVD-V
2
Some DVDs have a title menu,
which lists the titles available on
them. It helps you to start play-
back at a specific title.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a title to play using the
.@/:
1
ABC
2
DEF
3
K / L / { / B buttons, then
press ENTER button.
Playback will begin at the title you
selected.
CH
GHI
4
JKL
5
MNO
6
2
DVD
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
First:
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
TOP MENU button:
Displays the ‘Title menu’ of a
DVD disc which varies with the
disc.
PressTOP MENU button.
PLAY
The title menu will appear.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
If the feature is not available,
may appear on the TV screen.
2
K / L / { / B buttons:
MENU/LIST TOP MENU
RETURN
SKIP
1
2
3
Moves the cursor around screen.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). (Press ENTER
button after.)
3
PressTOP MENU button to
exit the title menu.
Note
• The TOP MENU button will
not always active with all
DVDs.
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Special playback
Resume play
Video
DVD-RW
DVD-V
VR
DVD-R
OPEN/CLOSE
POWER
2
REC SPEED AUDIO
CD
MP3
DVD-RW
Press PLAY B button.
In a few seconds, playback will
resume from the point at which it
stopped last.You can resume play
at the same point even if you turn
off the unit.
.@/:
1
ABC
2
DEF
3
You can resume play from where
you stopped playing the disc last.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
1
DISPLAY
VCR
DVD
PAUSE
During playback, press STOP
PLAY
2
1
2
C button.
The resume message will appear.
Screen:
To cancel the resume play and
start playing the disc from the
beginning, press STOP C button
the second time while the play-
back is stopped.
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Note
Resume ON
• For MP3 files, playback will
resume from the beginning of
the track at which playback
was stopped.
Fast forward / Fast reverse
Video
VR
OPEN/CLOSE
POWER
REC SPEED AUDIO
DVD-V
DVD-R
CD
MP3
DVD-RW
DVD-RW
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
During playback, press D or E button.
SPACE
0
Every time you press D or E button, approximate speed will be
changed as follows. (For DVD discs, the sound will be output during
playback in fast forward of x2 only if you set “Fast Forward with Audio”
to “ON” for the “Playback” setting in the SETUP menu.)
DISPLAY
VCR
DVD
PAUSE
PLAY
1
1
STOP
1
REC/OTR
SETUP
TIMER PROG.
RETURN
g
g
g
g
g
g
ENTER
REC MONITOR
Normal
speed
x40
x20
x5
x2
x20
x40
MENU/LIST TOP MENU
h
h
h
h
h
h
playback
Note
For Audio CDs, approximate speed is fixed at x8 with sound.
For MP3 files, approximate speed is fixed at x16.
To return to the normal playback, press PLAY B button.
• Forward/reverse speed will be
indicated with icons as fol-
lows.
Forward (Approx. Speed)
x2:
x20:
x40:
Reverse (Approx. Speed)
x5:
x20:
x40:
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Special playback (cont’d)
SkippingTV commercials during play
Video
DVD-RW
VR
DVD-RW
e.g. Press CM SKIP button once
DVD-R
7
8
9
SPACE
0
SLOW
You can skip TV commercials by
pressing CM SKIP button, so that
you can enjoy the recorded pro-
grams without interrupting.
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
CM Skip
30 sec.
ENTER
SKIP
REC MONITOR
1
MENU/LIST TOP MENU
RETURN
SKIP
During playback, press CM
SKIP button.
CLEAR/C-RESET ZOOM
SEARCH
(forwarding 30 seconds.)
CM SKIP
MODE
Normal playback will start at 30
seconds ahead from the point you
press CM SKIP button.
Every time you press CM SKIP
button, searching point will be
extended by 30 seconds ahead.
You can press up to 6 times (180
seconds).
1
B
Playback will restart automatically.
Pause
Video
DVD-RW
DVD-V
VR
DVD-R
CD
2
MP3
DVD-RW
OPEN/CLOSE
POWER
REC SPEED AUDIO
Press PLAY B button to
.@/:
1
resume play.
ABC
2
DEF
3
1
CH
GHI
4
JKL
5
MNO
6
During playback, press
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
PAUSE F button.
Playback will pause and sound will
be muted.
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
PLAY
2
STOP
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Special playback (cont’d)
Step by step playback
Video
DVD-V
VR
DVD-R
DVD-RW
SPACE
0
SLOW
2
DISPLAY
VCR
DVD
PAUSE
DVD-RW
1
3
Press SKIP G button
repeatedly.
PLAY
1
STOP
The playback will advance one
frame (or step) at a time when
you press the skip button with
the sound muted.
During playback, press
REC/OTR
SETUP
TIMER PROG.
PAUSE F button.
Playback will pause and sound will
be muted.
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
2
To play step by step back-
ward:
CM SKIP
MODE
Press SKIP H button repeatedly.
Every time you press the button,
the playback will go backward by
one frame.
3
Press PLAY B button to
resume play.
Slow forward / Slow reverse play
Video
DVD-RW
VR
DVD-RW
DVD-V
DVD-R
1
OPEN/CLOSE
POWER
REC SPEED AUDIO
During playback, press PAUSE k button, then press D or
E
.@/:
1
ABC
2
DEF
3
button.
CH
GHI
4
JKL
5
MNO
6
Every time you press D or E button, approximate speed will be
changed as follows. (The sound will remain mute.)
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
g
h
g
h
g
h
g
h
g
h
g
h
1
1
1
Pause
x1/4
x1/8
x1/16
x1/16
x1/8
x1/2
PLAY
STOP
1
REC/OTR
SETUP
TIMER PROG.
RETURN
To return to the normal playback, press PLAY B button.
ENTER
REC MONITOR
MENU/LIST TOP MENU
Note
• Forward/reverse speed will be
indicated with icons as fol-
lows.
Forward (Approx. Speed)
x1/16:
x1/8:
x1/2:
Reverse (Approx. Speed)
x1/16:
x1/8:
x1/4:
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Special playback (cont’d)
Zoom
STOP
REC/OTR
SETUP
TIMER PROG.
Video
DVD-RW
DVD-V
DVD-R
ENTER
SKIP
REC MONITOR
2
2
3
VR
DVD-RW
MENU/LIST TOP MENU
RETURN
SKIP
Select a desired zoom factor
to zoom using { / B buttons,
then press ENTER button.
The zoom area will be displayed.
CLEAR/C-RESET ZOOM
SEARCH
1
CM SKIP
MODE
1
During playback, press
ZOOM button.
Zoom menu will appear.
Screen:
DVD-Video
1
1
01:23:45
x1.2
x1.5
x2.0
Note
• When selecting a smaller factor
than the current one, the zoom
area will not be displayed.
• To remove the zoom menu, press
ZOOM button again at step 1.
• To cancel the zoom function,
select x1.0 using { / B buttons,
then press ENTER button.
3
B
Select a desired zoom position
There are four options
using K / L / { / B buttons, then
press ENTER button.
The zoom play will start.
(x1.0,x1.2,x1.5 and x2.0), these
are displayed excluding the cur-
rent zoom rate.
Marker Setup
OPEN/CLOSE
POWER
REC SPEED AUDIO
Video
DVD-RW
Screen for DVD:
.@/:
1
ABC
2
DEF
3
DVD-V
VR
DVD-R
CH
GHI
4
JKL
5
MNO
6
DVD-Video
1
1
01:23:45
CD
DVD-RW
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
1
2
3
4
5
6
This feature allows you to assign
a specific point on a disc to be
called back later.
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
PLAY
1
STOP
During playback, press DIS-
PLAY button.
REC/OTR
SETUP
TIMER PROG.
Screen for CD:
ENTER
SKIP
REC MONITOR
2
3
4
The display menu will appear.
Screen:
MENU/LIST TOP MENU
RETURN
SKIP
Audio CD
1
01:23:45
CLEAR/C-RESET ZOOM
SEARCH
1
2
3
4
5
6
CM SKIP
MODE
DVD-Video
1
1
01:23:45
Note
• To clear a marker, select the
marker number to be cleared,
then press CLEAR/C-RESET
button.
• All markers will be erased
when you operate these opera-
tions listed below.
– Opening the disc tray.
– Turning off the power.
– Recording to a recordable
disc.
3
Select a desired marker num-
ber using { / B buttons.
When reaches the desired
point, press ENTER button.
2
Select
icon using { /
B
buttons, then press ENTER
button.
Marker setup menu will appear.
4
To return to the marker later,
select the desired marker
number using { / B buttons,
then press ENTER button.
–
Changing the mode between
Original and Playlist. (VR mode)
•You can mark up to 6 points.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Search
Title/Chapter search
Video
DVD-RW
DVD-V
VR
DVD-R
DVD-RW
OPEN/CLOSE
POWER
REC SPEED AUDIO
Using SKIP H / G buttons
Using DISPLAY button
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
1
1
2
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
During playback, press SKIP
During playback, press DIS-
PLAY button.
SPACE
0
G button to skip the cur-
rent title or chapter and
move to the next.
The title or chapter will move
forward by one at a time.
DISPLAY
VCR
DVD
PAUSE
The display menu will appear.
Screen:
PLAY
STOP
DVD-Video
1
1
01:23:45
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
To go back to the previous title
2
1
MENU/LIST TOP MENU
RETURN
SKIP
or chapter, press SKIP H but-
ton.The title or chapter will move
backward one title at a time.
CLEAR/C-RESET ZOOM
SEARCH
2
Select
CM SKIP
MODE
icon using { /
B
buttons, then press ENTER
button.
‘T’ for title will be highlighted.
Title:
Enter a desired title number
to search using K / L buttons
or number buttons, then
press ENTER button.
Title search will start.
Chapter:
To move to ‘C’ for chapter, press
B button.
Enter a desired chapter num-
ber to search using K / L but-
tons or number buttons, then
press ENTER button.
Chapter search will start.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Search (cont’d)
Track search
CD
MP3
Using SKIP H / G buttons
Using DISPLAY button
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
.@/:
1
ABC
2
DEF
3
1
During playback, press SKIP
CH
GHI
4
JKL
5
MNO
6
During playback, press DIS-
PLAY button.
G button to skip the cur-
rent track and move to the
next.
The track will move forward one
at a time.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
The display menu will appear.
Screen:
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
Audio CD
1
01:23:45
PLAY
STOP
To go back to the previous track,
REC/OTR
SETUP
TIMER PROG.
2
3
1
ENTER
SKIP
press SKIP H button.The track
will move backward one at a time.
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
2
Select
CLEAR/C-RESET ZOOM
SEARCH
icon using { /
B
CM SKIP
MODE
buttons, then press ENTER
button.
‘T’ for track will be highlighted.
3
Enter a desired track number
to search using K / L buttons
or number buttons, then
press ENTER button.
Track search will start.
Time search
OPEN/CLOSE
POWER
REC SPEED AUDIO
Video
DVD-RW
DVD-V
VR
DVD-R
CD
.@/:
1
ABC
2
DEF
3
2
CH
GHI
4
JKL
5
MNO
6
DVD-RW
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Select
icon using { /
B
1
buttons, then press ENTER
button.
‘T’ for title or track will be high-
lighted.
SPACE
0
During playback, press DIS-
PLAY button.
DISPLAY
VCR
DVD
PAUSE
1
PLAY
The display menu will appear.
Screen for DVD:
STOP
To move to the clock icon, press
REC/OTR
SETUP
TIMER PROG.
B button.
DVD-Video
1
1
01:23:45
ENTER
SKIP
REC MONITOR
2
3
MENU/LIST TOP MENU
RETURN
SKIP
3
CLEAR/C-RESET ZOOM
SEARCH
Enter a desired time to
CM SKIP
MODE
Screen for CD:
search using K / L buttons or
number buttons, then press
ENTER button.
Note
Audio CD
1
01:23:45
• Time search function is avail-
able only in the same track or
title.
Time search will start.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Repeat/Random/Program play
Repeat play
OPEN/CLOSE
POWER
Video
DVD-RW
REC SPEED AUDIO
Title:
DVD-V
VR
DVD-R
CD
The current title will be played
repeatedly. (DVD only)
.@/:
1
ABC
2
DEF
3
MP3
DVD-RW
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Chapter:
The current chapter will be played
repeatedly. (DVD only)
1
SPACE
0
During playback, press DIS-
PLAY button.
DISPLAY
VCR
DVD
PAUSE
The display menu will appear.
1
PLAY
All:
DVD-Video
1
1
01:23:45
STOP
The current disc will be played
repeatedly. (CD, MP3, DVD-RW
(VR mode) only)
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
3
MENU/LIST TOP MENU
RETURN
SKIP
A-B:
CLEAR/C-RESET ZOOM
SEARCH
The A-B point will be played
repeatedly.
CM SKIP
MODE
2
Select
icon using
{
/
B
but-
tons, then press ENTER button.
When pressing ENTER button
while A-B is highlighted, the start-
ing point (A) will be decided.
Repeat menu will appear.
Screen:
Press ENTER button again to
select the ending point (B).
DVD-Video
1
1
01:23:45
OFF
Title
Chapter
A-B
Note
Track:
• The A-B Repeat playback can
only be set with in the cur-
rent title (for DVDs), or cur-
rent track (for Audio CDs).
• To cancel the repeat playback,
select OFF at step 2.
• You cannot select “Group”
during the random playback
of MP3 files.
The current track will be played
repeatedly. (CD, MP3 only)
Group:
3
The current group will be played
repeatedly. (MP3 only)
Select a desired option to
repeat using K / L buttons,
then press ENTER button.
The selected repeat play will start.
Random play
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
CD
MP3
SPACE
0
With this function, you can play a
disc randomly instead of playing in
the original order.
2
Select “CD” using { / B but-
tons, then press ENTER but-
ton.
DISPLAY
VCR
DVD
PAUSE
DVD
First:
PLAY
CD Playback Mode menu will
STOP
appear.
REC/OTR
SETUP
TIMER PROG.
1
1
ENTER
SKIP
REC MONITOR
Press SETUP button to dis-
play SETUP/CD menu.
SETUP/CD menu will appear.
CD Playback Mode
MENU/LIST TOP MENU
RETURN
SKIP
2
3
Random Play
Program Play
CLEAR/C-RESET ZOOM
SEARCH
Screen:
CM SKIP
MODE
3
Note
Select “Random Play” using
K / L buttons, then press
ENTER button.
• To cancel random playback,
press STOP C button twice
during random playback.
Random playback will start.
Setup Menu
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Repeat/Random/Program play (cont’d)
Program play
CD
3
You can program the disc to play
in your desired order.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Program Play” using
DVD
.@/:
1
ABC
2
DEF
3
K / L buttons, then press
ENTER button.
Program play list will appear.
First:
CH
GHI
4
JKL
5
MNO
6
4
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
1
SPACE
0
CD Playback Mode > Program Play
Press SETUP button to dis-
play SETUP/CD menu.
SETUP/CD menu will appear.
Screen:
DISPLAY
VCR
DVD
PAUSE
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
PLAY
5
STOP
REC/OTR
SETUP
TIMER PROG.
1
ENTER
SKIP
REC MONITOR
Total
00:00:00
MENU/LIST TOP MENU
RETURN
SKIP
2
3
4
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
Select a desired track using
L buttons, then press
K
Setup Menu
/
ENTER button or B button.
A cursor will move to the next.
2
CD Playback Mode > Program Play
Select “CD” using { / B but-
tons, then press ENTER but-
ton.
07 - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - -
CD Playback Mode menu will
appear.
Total
00:04:30
CD Playback Mode
Random Play
Program Play
5
Press PLAY B button to start
program playback.
Program playback will start.
Note
• To erase tracks you selected,
press CLEAR/C-RESET but-
ton.
• You can make program set-
tings up to 50.
• To cancel program playback,
press STOP C button twice
during program playback.
• You may also select a desired
track using Number buttons
at step 4.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Selecting the format of audio and video
You can select an audio and video format as you prefer depending on
the contents of the disc you are playing.
Switching audio soundtrack
VR
DVD-V
DVD-RW
<DVD-RWVR mode>
When playing a DVD-Video disc
recorded with two or more
soundtracks (these are often in
different languages), you can
switch between them anytime
during playback.
On DVD-RW discs recorded in
VR mode, you can switch to main
(L), sub audio (R) or a mix of
both (L/R).
DVD-RW
VR Original
1
1
00:00:00
1 Dolby Digital Dual L/R
2 Dolby Digital 2ch ----
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
3
PLAY
Select a desired audio sound-
1
STOP
track using K / L buttons,
then press ENTER button.
<DVD-Video>
REC/OTR
SETUP
TIMER PROG.
During playback, press DIS-
PLAY button.
ENTER
SKIP
REC MONITOR
The display menu will appear.
Screen:
MENU/LIST TOP MENU
RETURN
SKIP
2
3
4
Audio soundtrack will switch.
CLEAR/C-RESET ZOOM
SEARCH
<DVD-RWVR mode>
Audio channel menu will appear.
Follow step 4.
CM SKIP
MODE
DVD-Video
1
1
01:23:45
DVD-RW
VR Original
1
1
00:00:00
1 Dolby Digital Dual
2 Dolby Digital 2ch
L/R
L
R
2
Select
icon using { /
B
buttons, then press ENTER
button.
Audio menu will appear.
<DVD-Video>
4
Note
Select a desired audio chan-
•
•
•
Some discs will only allow
you to change the sound-
track from the disc’s menu.
Press TOP MENU button or
MENU / LIST button to dis-
play the disc’s menu.
On DVD-RW discs recorded
inVR mode that may have
both a main and a sub audio
channel, you can switch to
main (L), sub audio (R) or a
mix of both (L/R).
This unit CANNOT record
in both stereo and SAP
(Secondary Audio Program)
at the same time.
nel using K / L buttons, then
press ENTER button.
Audio channel will switch.
DVD-Video
1
1
00:00:00
1 Dolby Digital 5.1ch English
2 Dolby Digital 2ch Japanese
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Selecting the format of audio and video (cont’d)
CD
MP3
2
When playing Audio CDs or MP3
files you can switch between
stereo, just the left channel or
just the right channel.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select
icon using { / B
.@/:
1
ABC
2
DEF
3
buttons, then press ENTER
button.
Audio menu will appear.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
1
DISPLAY
VCR
DVD
PAUSE
During playback, press DIS-
PLAY button.
1
3
PLAY
Select a desired audio chan-
The display menu will appear.
Screen:
STOP
nel using K / L buttons, then
press ENTER button.
Audio channel will switch.
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
Audio CD
1
00:00:00
MENU/LIST TOP MENU
RETURN
SKIP
2
3
Audio CD
1
00:00:00
CLEAR/C-RESET ZOOM
SEARCH
L/R
L
CM SKIP
MODE
R
Switching subtitles
VR
DVD-V
DVD-RW
2
Many DVDVideo discs have subti-
tles in one or more languages –
the case usually tells you which
subtitle languages are available.
You can switch subtitle languages
anytime during playback.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select
icon using { / B
.@/:
1
buttons, then press ENTER
button.
Subtitle menu will appear.
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DVD-Video
1
1
00:00:00
DISPLAY
VCR
DVD
PAUSE
1
OFF
1English
2Japanese
1
During playback, press DIS-
PLAY button.
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
The display menu will appear.
Screen:
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
2
3
DVD-Video
1
1
01:23:45
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
3
Select a desired subtitle lan-
guage using K / L buttons,
then press ENTER button.
Subtitle will be displayed in the
selected language.
Note
• Some discs will only allow
you to change the subtitle
from the disc’s menu. Press
TOP MENU button or MENU
/ LIST button to display the
disc’s menu.
When selecting “OFF,” subtitle will
disappear.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
Selecting the format of audio and video (cont’d)
Switching camera angles
DVD-V
2
Some DVDVideo discs feature
scenes shot from two or more
angles–check the case for details:
it should be marked with an angle
icon if it contains multi-angle
scenes.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select
icon using { /
B
.@/:
1
ABC
2
DEF
3
buttons, then press ENTER
button.
Angle will switch each you press
ENTER button.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
1
During playback, press DIS-
PLAY button.
PLAY
STOP
The display menu will appear.
Screen:
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
MENU/LIST TOP MENU
RETURN
SKIP
DVD-Video
1
1
01:23:45
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Angle icon appears when a switch-
ing camera angle is available.
Reducing block noise
Video
DVD-V
VR
DVD-R
DVD-RW
OPEN/CLOSE
POWER
REC SPEED AUDIO
DVD-Video
1
1
00:00:00
.@/:
1
ABC
2
DEF
3
DVD-RW
OFF
Type 1
Type 2
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
1
SPACE
0
During playback, press DIS-
PLAY button.
DISPLAY
VCR
DVD
PAUSE
1
The display menu will appear.
Screen:
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
3
DVD-Video
1
1
01:23:45
ENTER
SKIP
REC MONITOR
Select a desired option using
2
3
MENU/LIST TOP MENU
RETURN
SKIP
K / L buttons, then press
ENTER button.
Your setting will be activated.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
This function reduces noise in the
playback picture.When playing
back discs recorded in long time
mode such as SLP or SEP mode,
select "Type 1" or "Type 2".
("Type 2" is more effective.)
When playing back discs with a
few noises such as DVD-Video
discs, select "OFF".
2
Select
icon using { /
B
buttons, then press ENTER
button.
NR menu will appear.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Information on disc editing
Guide to a title list
Editing discs inVideo mode
Title list allows you to check the titles recorded on
the disc easily.You can choose a title to play from this
screen and easily edit the titles as you prefer.
You can edit discs inVideo mode for the following items.
Be sure that once you edit titles, they will not remain as
recorded originally.
• Deleting titles (Refer to page 61)
• Putting names on titles (Refer to pages 62-63)
• Setting or clearing chapter markers (Refer to page 64)
Disc > Edit > Original
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
6
Note
•
Once a disc is finalized, then editing the disc or
recording to the disc will not be available.
(Except DVD-RW discs inVR mode.)
A playlist is not available with the DVD-R discs
and DVD-RW discs inVideo mode.
JAN/1 6:00AM
JAN/1 4:00AM
JAN/1 5:00AM
1
2
7
•
Disc > Edit > Original
Title Delete
Scene Delete
1
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
JAN/1 1:00AM CH12 XP
0:01:25
8 3
6
5
4
1. Titles recorded on the disc can be selected to
edit by pressing ENTER button with the cursor
on the title.
2. Protect icon, which appears when the title has
been protected.
3. The selected title thumbnails from the title list.
4. The menus in here for editing titles as you pre-
fer. The available menus depends on the disc
type and the format type.
5. The details of the title, which can be changed to
the title name you will edit.
6. Time status bar of the title.
7. The arrow icon, which means the title list
includes a next or a previous page. Press B or
{ button by following direction of the icon.
8. Playback status of the current disc.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Information on disc editing (cont’d)
Editing discs inVR mode
For discs inVR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Editing original titles
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 65)
• Deleting parts of titles (Refer to pages 66-67)
• Putting names on titles (Refer to pages 67-68)
• Setting or clearing chapter markers (Refer to
pages 69-70)
Editing playlists
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 74)
• Deleting parts of titles (Refer to pages 75-76)
• Putting names on titles (Refer to pages 76-77)
• Setting or clearing chapter markers (Refer to
pages 78-79)
• Setting pictures for thumbnails (Refer to pages
70-71)
• Setting titles to protect (Refer to page 72)
• Releasing titles from protecting (Refer to page 73)
• Setting pictures for thumbnails (Refer to pages
79-80)
• Adding titles to a playlist (Refer to page 81)
• Deleting a playlist (Refer to page 82)
Note
•
Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer. (Refer to pages 74-82)
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVideo mode
Deleting titles
Video
DVD-RW
3
You can delete titles which you
do not need anymore.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
When the last title in the title list
inVideo mode is deleted, the disc
space to record will be increased.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Edit menu will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
Disc > Edit
DISPLAY
VCR
DVD
PAUSE
Title Delete
1
Edit Title Name
Chapter Mark
DVD
PLAY
First:
STOP
REC/OTR
SETUP
TIMER PROG.
1
6
JAN/ 1 1:00AM CH12 XP
1
ENTER
SKIP
REC MONITOR
0:01:25
1
2
3
4
5
Press SETUP button. Select
MENU/LIST TOP MENU
RETURN
SKIP
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
Select “Title Delete” using
K
Disc
/
L buttons, then press
Edit
ENTER button.
Format
Finalize
Option window will appear.
Disc > Edit
Title Delete
1
Edit Title Name
Chapter Mark
Yes
JAN/ 1 1:00AM CH12 XP
No
2
0:01:25
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
5
Titlelist will appear.
Screen:
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Disc > Edit
1
12
3
Title will be deleted.
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Disc > Edit
Title Delete
1
Edit Title Name
Chapter Mark
JAN/1 4:00AM
JAN/1 5:00AM
Yes
No
JAN/ 1 1:00AM CH12 XP
Writing to Disc
This operation may take a
while to be completed.
6
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVideo mode (cont’d)
Putting names on titles
Video
DVD-RW
4
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “EditTitle Name”
.@/:
1
ABC
2
DEF
3
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
5
1
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
DVD
First:
SPACE
0
DISPLAY
VCR
DVD
PAUSE
Disc > Edit > Edit Title Name
A B C
1
1
PLAY
a b c
1 2 3
@ ! ?
Press SETUP button. Select
STOP
REC/OTR
SETUP
TIMER PROG.
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ENTER
SKIP
REC MONITOR
JAN/ 1 1:00AM CH12 XP
0:01:25
1
2
3
4
5
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
Disc
CM SKIP
MODE
Edit
Format
Finalize
5
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Disc > Edit > Edit Title Name
A B C
1
2
[
]
Guide to edit title name
a b c
1 2 3
@ ! ?
[
[
]
Step1 : Select a desired character set using
K
L
Select “Edit” using K / L but-
tons, then press ENTER button.
Titlelist will appear.
/
buttons, then press
ENTER button.
A B C
a b c
1 2 3
@ ! ?
JAN/ 1 1:00AM CH12 XP
0:01:25
Screen:
]
Step2 : Press Number buttons following by the list
below.
Select
ABC
abc
123
@ ! ?
Disc > Edit
Press
area for entering title names
<space>
<space>
0
<space>
0
1
12
3
! ” # $ %
& ‘ ( ) *
+ , - . / : ;
< = > ?
@ [ ] ^
_ { | }
When you finish entering a title
name, press ENTER button.
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
1
(*1)
(*1)
1
2
3
4
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
JAN/1 4:00AM
JAN/1 5:00AM
GHI
ghi
JKL
jkl
5
6
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
7
8
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
wxyz
9
1
*1 Press
button, character set will be changed
to the " @ " mode automatically.
!?
to
2
9
*2 Press
buttons, character set will
Edit menu will appear.
be changed to the previous input mode
automatically.
• To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
Disc > Edit
Title Delete
1
• To go on to the next entering area for letters,
Edit Title Name
Chapter Mark
B
press
button.
• You can enter up to 30 letters.
JAN/ 1 1:00AM CH12 XP
0:01:25
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVideo mode (cont’d)
6
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
The name you entered will be
activated for the title.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
Disc > Edit > Edit Title Name
A B C
a b c
1 2 3
@ ! ?
1
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
7
Yes
No
ENTER
SKIP
REC MONITOR
abc
6
MENU/LIST TOP MENU
RETURN
SKIP
Writing to Disc
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
This operation may take a
while to be completed.
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVideo mode (cont’d)
Setting or clearing chapter markers
Video
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
Disc > Edit
OPEN/CLOSE
POWER
REC SPEED AUDIO
Title Delete
Edit Title Name
Chapter Mark
1
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
You can set chapter markers at a
specified time you selected for
titles with more than 5 minutes.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
JAN/ 1 1:00AM CH12 XP
SPACE
0
0:01:25
DISPLAY
VCR
DVD
PAUSE
DVD
First:
PLAY
4
STOP
1
1
7
REC/OTR
SETUP
TIMER PROG.
Select “Chapter Mark” using
1
2
3
4
5
6
Press SETUP button. Select
ENTER
SKIP
REC MONITOR
K / L buttons, then press
ENTER button.
Option window will appear.
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Disc > Edit
Title D
OFF
Disc
1
Edit Ti
5 minutes
Chapte
Edit
10 minutes
15 minutes
30 minutes
60 minutes
Format
Finalize
JAN/ 1 1:00AM CH12 XP
0:01:25
5
2
Select a desired time using
K
/
L buttons, then press
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
ENTER button.
Option window will appear.
Titlelist will appear.
Screen:
Disc > Edit
Title D
OFF
5 minutes
Chapte
10 minutes
1
Edit Ti
Disc > Edit
15 minutes
30 minutes
60 minutes
1
12
3
Yes
JAN/ 1 1:00AM CH12 XP
No
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
0:01:25
Note
JAN/1 4:00AM
JAN/1 5:00AM
• You cannot select a time for
putting markers beyond a
length of a title.
• When recording at the
recording speed other than
XP or SEP, the length of chap-
ters may be slightly longer or
shorter than the one speci-
fied at the step 5.
6
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Chapter markers will be added at
the specified time points.
Edit menu will appear.
7
• A chapter marker may be
delayed according to the
recording content.
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original)
Deleting titles
VR
DVD-RW
4
When a title is deleted from an
original list inVR mode, the disc
space to record will be increased.
Be advised that the titles once
deleted cannot be brought back
to the disc.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Original menu will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DVD
Disc > Edit > Original
First:
DISPLAY
VCR
DVD
PAUSE
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
Press SETUP button. Select
1
7
JAN/ 1 1:00AM CH12 XP
1
2
3
4
5
6
ENTER
SKIP
REC MONITOR
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
0:01:25
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
5
Disc
Edit
Select “Title Delete” using
K
Format
/
L buttons, then press
Finalize
Disc Protect OFF ON
ENTER button.
Option window will appear.
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
2
Yes
JAN/ 1 1:00AM CH12 XP
No
Select “Edit” using K / L but-
tons, then press ENTER button.
Original/PlayList menu will appear.
0:01:25
Disc > Edit
6
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Title will be deleted.
Original
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF ON
3
Select “Original” using { /
buttons, then press ENTER
button.
B
Yes
No
JAN/ 1 1:00AM CH12 XP
Writing to Disc
Original list will appear.
This operation may take a
while to be completed.
Disc > Edit > Original
1
2
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
JAN/1 4:00AM
JAN/1 5:00AM
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
Deleting parts of titles
VR
DVD-RW
4
You can delete part of a title, the
disc space to record will be
increased.
Be advised that the parts once
deleted cannot be brought back
to the disc.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Original menu will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DVD
Disc > Edit > Original
First:
DISPLAY
VCR
DVD
PAUSE
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
Press SETUP button. Select
1
JAN/ 1 1:00AM CH12 XP
1
2
3
4
5
6
ENTER
SKIP
REC MONITOR
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
0:01:25
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
5
Disc
Edit
Select “Scene Delete” using
Format
K / L buttons, then press
ENTER button.
Option window will appear.
Finalize
Disc Protect OFF ON
Disc > Edit > Original
Title Delete
1
Scene Delete
Start
Edit Titl
End
Chapte
Preview
Index P
2
Delete
Protect
Select “Edit” using K / L but-
tons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
JAN/ 1 1:00AM CH12 XP
0:00:55
Disc > Edit
6
Press ENTER button to
decide a start point, then
press ENTER button to
decide an end point.
A cursor will move to “Preview.”
You can check a preview.
Original
3
Select “Original” using { /
buttons, then press ENTER
button.
B
<Preview>
Start point End point
Original list will appear.
Before
editing
Disc > Edit > Original
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Edited
JAN/1 4:00AM
JAN/1 5:00AM
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
OPEN/CLOSE
POWER
REC SPEED AUDIO
7
8
.@/:
1
ABC
2
DEF
3
Select “Delete” using K /
L
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
CH
GHI
4
JKL
5
MNO
6
buttons, then press ENTER
button.
Option window will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
Part of a title will be deleted.
DISPLAY
VCR
DVD
PAUSE
Disc > Edit > Original
Disc > Edit > Original
PLAY
Title Delete
Title Delete
1
1
Scene Dt
Scene De
Start
Start
STOP
Edit Titl
End
Edit Titl
End
Chapte
Chapte
Preview
Preview
REC/OTR
SETUP
TIMER PROG.
9
Index P
Index P
Delete
Delete
Protect
Protect
ENTER
SKIP
REC MONITOR
Yes
JAN/ 1 1:00AM CH12 XP
No
Yes
No
7
8
JAN/ 1 1:00AM CH12 XP
Writing to Disc
MENU/LIST TOP MENU
RETURN
SKIP
0:01:25
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
This operation may take a
while to be completed.
Note
• You cannot select “Scene
9
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Putting names on titles
VR
DVD-RW
2
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
Original/PlayList menu will appear.
Screen:
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
DVD
First:
SPACE
0
DISPLAY
VCR
DVD
PAUSE
Disc > Edit
1
PLAY
Press SETUP button. Select
STOP
REC/OTR
SETUP
TIMER PROG.
1
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ENTER
SKIP
REC MONITOR
1
2
MENU/LIST TOP MENU
RETURN
SKIP
Original
CLEAR/C-RESET ZOOM
SEARCH
Disc
CM SKIP
MODE
Edit
Format
Finalize
Disc Protect OFF ON
Instructions continue to the next page.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
3
6
OPEN/CLOSE
POWER
REC SPEED AUDIO
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Select “Original” using { /
buttons, then press ENTER
button.
B
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
6
8
Original list will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
Disc > Edit > Original
Disc > Edit > Original > Edit Title Name
DISPLAY
VCR
DVD
PAUSE
A B C
a b c
1 2 3
@ ! ?
1
1
2
3
PLAY
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
STOP
REC/OTR
SETUP
TIMER PROG.
JAN/ 1 1:00AM CH12 XP
ENTER
SKIP
REC MONITOR
JAN/1 4:00AM
JAN/1 5:00AM
0:01:25
3
4
5
6
7
MENU/LIST TOP MENU
RETURN
SKIP
area for entering title names
When you finish entering a title
name, press ENTER button.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
7
Original menu will appear.
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Disc > Edit > Original
Title Delete
1
The name you entered will be
activated for the title.
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
[
]
Guide to edit title name
Step1 : Select a desired character set using
[
]
K
L
/
buttons, then press
ENTER button.
A B C
a b c
1 2 3
@ ! ?
Disc > Edit > Original > Edit Title Name
JAN/ 1 1:00AM CH12 XP
A B C
a b c
1 2 3
@ ! ?
1
0:01:25
[
]
Step2 : Press Number buttons following by the list
below.
Select
ABC
abc
123
@ ! ?
Yes
No
Press
abc
5
<space>
<space>
0
<space>
0
Writing to Disc
! ” # $ %
& ‘ ( ) *
+ , - . / : ;
< = > ?
@ [ ] ^
_ { | }
Select “EditTitle Name”
1
(*1)
(*1)
1
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
This operation may take a
while to be completed.
2
3
4
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
GHI
ghi
JKL
jkl
5
6
8
Disc > Edit > Original > Edit Title Name
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
A B C
1
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
7
8
a b c
1 2 3
@ ! ?
wxyz
9
1
*1 Press
button, character set will be changed
to the " @ " mode automatically.
buttons, character set will
be changed to the previous input mode
!?
JAN/ 1 1:00AM CH12 XP
0:01:25
2
9
*2 Press
to
automatically.
• To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
• To go on to the next entering area for letters,
B
press
button.
• You can enter up to 30 letters.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
Disc > Edit > Original
OPEN/CLOSE
POWER
REC SPEED AUDIO
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the original list comes
to 999 in total, you cannot add
any more chapter markers.
1
2
3
.@/:
1
ABC
2
DEF
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
JAN/1 4:00AM
JAN/1 5:00AM
DISPLAY
VCR
DVD
PAUSE
PLAY
4
STOP
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
DVD
REC/OTR
SETUP
TIMER PROG.
1
First:
ENTER
SKIP
REC MONITOR
1
MENU/LIST TOP MENU
RETURN
SKIP
Original menu will appear.
1
2
3
4
5
6
CLEAR/C-RESET ZOOM
SEARCH
Press SETUP button. Select
CM SKIP
MODE
Disc > Edit > Original
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Disc
JAN/ 1 1:00AM CH12 XP
Edit
0:01:25
Format
Finalize
Disc Protect OFF ON
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Add
Chapte
Chapter 1/1
Original/PlayList menu will appear.
Screen:
Delete
Index P
Protect OFF ON
JAN/ 1 1:00AM CH12 XP
Disc > Edit
0:01:25
6
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Original
3
Select “Original” using { /
buttons, then press ENTER
button.
B
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Add
Chapte
Chapter 1/1
Original list will appear.
Delete
Index P
Protect OFF ON
F
Yes
No
JAN/ 1 1:00AM CH12 XP
0:01:25
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
<Delete>:
<Delete>:
The chapter marker which you
selected will be deleted.
Disc > Edit > Original
OPEN/CLOSE
POWER
REC SPEED AUDIO
Title Delete
1
Scene Delete
Edit Title Name
Chapte
.@/:
1
ABC
2
DEF
3
Add
Delete
Chapter 2/2
CH
GHI
4
JKL
5
MNO
6
Index P
Disc > Edit > Original
Protect OFF ON
F
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Yes
No
Title Delete
1
Scene Delete
Edit Title Name
JAN/ 1 1:00AM CH12 XP
SPACE
0
Add
Chapte
Chapter 2/2
0:01:25
Delete
Index P
DISPLAY
VCR
DVD
PAUSE
Protect OFF ON
Yes
No
•You cannot delete the first
chapter marker of each title.
JAN/ 1 1:00AM CH12 XP
Writing to Disc
PLAY
STOP
8
REC/OTR
SETUP
TIMER PROG.
7
ENTER
SKIP
REC MONITOR
This operation may take a
while to be completed.
Select “Yes” using { / B but-
tons, then press ENTER button.
<Add>:
7
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
A chapter marker will be added.
8
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Add
Chapte
Chapter 1/1
Delete
Index P
Protect OFF ON
Yes
No
JAN/ 1 1:00AM CH12 XP
Writing to Disc
This operation may take a
while to be completed.
Setting pictures for thumbnails
VR
DVD-RW
2
OPEN/CLOSE
POWER
You can set a picture to each title for
REC SPEED AUDIO
a thumbnail. It helps you to remem-
ber the contents of the title you are
playing.The beginning picture has
been selected as the default.
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Original/PlayList menu will appear.
Screen:
SPACE
0
DVD
First:
DISPLAY
VCR
DVD
PAUSE
Disc > Edit
PLAY
1
STOP
Press SETUP button. Select
REC/OTR
SETUP
TIMER PROG.
1
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ENTER
SKIP
REC MONITOR
1
2
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
Original
CM SKIP
MODE
Disc
Edit
Format
Note
Finalize
Disc Protect OFF ON
• If a selected picture for a
thumbnail is deleted by delet-
ing a part of a title, a default
picture will be selected.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
3
6
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Original” using { /
buttons, then press ENTER
button.
B
Select “Yes” using { / B but-
.@/:
1
ABC
2
DEF
3
tons, then press ENTER but-
ton.
A picture for thumbnail will be
set.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Original list will appear.
SPACE
0
Disc > Edit > Original
DISPLAY
VCR
DVD
PAUSE
1
2
3
Disc > Edit > Original
5
Title Delete
1
PLAY
Scene Delete
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
STOP
REC/OTR
SETUP
TIMER PROG.
7
5
ENTER
SKIP
REC MONITOR
Yes
JAN/ 1 1:00AM CH12 XP
Writing to Disc
No
JAN/1 4:00AM
JAN/1 5:00AM
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
This operation may take a
while to be completed.
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
7
Original menu will appear.
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
JAN/ 1 1:00AM CH12 XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, E, D, PLAY
B
and PAUSE F buttons to
decide the picture you want
to select as a thumbnail.Then
press ENTER button.
Option window will appear.
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
F
Yes
No
JAN/ 1 1:00AM CH12 XP
0:01:25
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
Setting titles to protect
VR
DVD-RW
4
To prevent accidental editing or
erasing the titles, you can protect
them from the original menu.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
DVD
First:
Original menu will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
Disc > Edit > Original
1
DISPLAY
VCR
DVD
PAUSE
Title Delete
1
Press SETUP button. Select
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
PLAY
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
STOP
1
7
REC/OTR
SETUP
TIMER PROG.
JAN/ 1 1:00AM CH12 XP
ENTER
SKIP
REC MONITOR
0:01:25
1
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
Disc
Edit
CLEAR/C-RESET ZOOM
SEARCH
Format
5
CM SKIP
MODE
Finalize
Select “Protect OFF ➔ ON”
using K / L buttons, then
press ENTER button.
Disc Protect OFF ON
Option window will appear.
Disc > Edit > Original
Title Delete
1
2
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Yes
JAN/ 1 1:00AM CH12 XP
No
Original/PlayList menu will appear.
Screen:
0:01:25
Disc > Edit
6
Select “Yes” using { / B but-
tons, then press ENTER button.
Disc > Edit > Original
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF ON
Original
Yes
No
3
JAN/ 1 1:00AM CH12 XP
Writing to Disc
Select “Original” using { /
buttons, then press ENTER
button.
B
This operation may take a
while to be completed.
Original list will appear.
Disc > Edit > Original
7
1
2
3
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
JAN/1 4:00AM
JAN/1 5:00AM
To protect a whole disc
(DVD-RWVR mode Only):
Select “Disc Protect” from Disc
menu, then select “Yes”.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Original) (cont’d)
Releasing titles from protecting
VR
DVD-RW
4
You are allowed to release the
titles protecting feature once pro-
tected.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
DVD
First:
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Original menu will appear.
SPACE
0
1
Disc > Edit > Original
DISPLAY
VCR
DVD
PAUSE
Title Delete
2
Press SETUP button. Select
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
PLAY
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
STOP
REC/OTR
SETUP
TIMER PROG.
1
7
JAN/ 1 2:00AM CH12 XP
ENTER
SKIP
REC MONITOR
0:01:25
1
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
Disc
Edit
CLEAR/C-RESET ZOOM
SEARCH
“Protect ON → OFF” is selected.
Format
CM SKIP
MODE
Finalize
Disc Protect OFF ON
5
Press ENTER button.
Option window will appear.
Disc > Edit > Original
2
Title Delete
2
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
B
Yes
JAN/ 1 2:00AM CH12 XP
No
0:01:25
Disc > Edit
6
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Original
Disc > Edit > Original
Title Delete
2
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON OFF
3
Yes
No
Select “Original” using { /
buttons, then press ENTER
button.
B
JAN/ 1 2:00AM CH12 XP
Writing to Disc
Original list will appear.
This operation may take a
while to be completed.
Disc > Edit > Original
1
2
3
7
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
JAN/1 4:00AM
JAN/1 5:00AM
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist)
Deleting titles
VR
DVD-RW
4
InVR mode, even when a title is
deleted from a Playlist, the original
title will remain in an Original list.
The disc space to record will not
be increased.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Playlist menu will appear.
DVD
SPACE
0
First:
Disc > Edit > Playlist
DISPLAY
VCR
DVD
PAUSE
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
1
PLAY
STOP
Press SETUP button. Select
REC/OTR
SETUP
TIMER PROG.
1
7
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12 XP
ENTER
SKIP
REC MONITOR
0:01:25
1
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
Disc
CM SKIP
MODE
5
Edit
Format
Select “Title Delete” using
K
Finalize
/
L buttons, then press
Disc Protect OFF ON
ENTER button.
Option window will appear.
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
2
Yes
JAN/ 1 1:00AM CH12 XP
No
Select “Edit” using K / L but-
tons, then press ENTER button.
Original/PlayList menu will appear.
0:01:25
Disc > Edit
6
Select “Yes” using { / B but-
tons, then press ENTER button.
Title will be deleted.
Original
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
3
Yes
No
Select “PlayList” using { /
buttons, then press ENTER
button.
B
JAN/ 1 1:00AM CH12 XP
Writing to Disc
Playlist will appear.
This operation may take a
while to be completed.
Disc > Edit > Playlist
1
2
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
7
Add New
Title
Delete
Playlist
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
JAN/1 4:00AM
JAN/1 5:00AM
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
Deleting parts of titles
VR
DVD-RW
4
You can delete part of a title.
Even when a title is deleted from
the playlist, the original title will
remain.
The disc space to record will not
be increased.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Playlist menu will appear.
SPACE
0
DVD
Disc > Edit > Playlist
DISPLAY
VCR
DVD
PAUSE
First:
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
PLAY
1
STOP
REC/OTR
SETUP
TIMER PROG.
1
Press SETUP button. Select
JAN/ 1 1:00AM CH12 XP
ENTER
SKIP
REC MONITOR
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
0:01:25
1
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
5
Disc
Edit
Select “Scene Delete” using
Format
K / L buttons, then press
ENTER button.
Finalize
Disc Protect OFF ON
Option window will appear.
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Start
Edit Titl
End
Chapte
Preview
Index P
2
Delete
Select “Edit” using K / L but-
tons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
JAN/ 1 1:00AM CH12 XP
0:00:55
Disc > Edit
6
Press ENTER button to
decide a start point, then
press ENTER button to
decide an end point.
A cursor will move to “Preview”.
You can check a preview.
Original
3
Select “PlayList” using { /
buttons, then press ENTER
button.
B
<Preview>
Start point End point
Playlist will appear.
Before
editing
Disc > Edit > Playlist
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Add New
Title
Edited
Delete
Playlist
JAN/1 4:00AM
JAN/1 5:00AM
Instructions continue to the next page.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
.@/:
1
ABC
2
DEF
3
Part of a title will be deleted.
CH
GHI
4
JKL
5
MNO
6
7
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Disc > Edit > Playlist
Title Delete
1
Select “Delete” using K /
L
SPACE
0
Scene Delete
Start
Edit Titl
End
buttons, then press ENTER
button.
DISPLAY
VCR
DVD
PAUSE
Chapte
Preview
Index P
Delete
Yes
JAN/ 1 1:00AM CH12 XP
Writing to Disc
No
PLAY
Option window will appear.
STOP
REC/OTR
SETUP
TIMER PROG.
Disc > Edit > Playlist
9
Title Delete
1
ENTER
SKIP
REC MONITOR
Scene Dt
Start
Edit Titl
End
This operation may take a
while to be completed.
MENU/LIST TOP MENU
RETURN
SKIP
7
8
Chapte
Preview
Index P
Delete
CLEAR/C-RESET ZOOM
SEARCH
Yes
JAN/ 1 1:00AM CH12 XP
No
CM SKIP
MODE
0:01:25
9
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Note
8
• You cannot select “Scene
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
Putting names on titles
VR
Original/PlayList menu will appear.
Screen:
DVD-RW
You can put title names on the
titles and change the names from
this menu.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Disc > Edit
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
The names you put on the titles
will be displayed on a titlelist.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
DVD
SPACE
0
First:
DISPLAY
VCR
DVD
PAUSE
Original
1
PLAY
STOP
Press SETUP button. Select
REC/OTR
SETUP
TIMER PROG.
3
1
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ENTER
SKIP
REC MONITOR
Select “PlayList” using { /
buttons, then press ENTER
button.
B
MENU/LIST TOP MENU
RETURN
SKIP
1
2
3
CLEAR/C-RESET ZOOM
SEARCH
Disc
CM SKIP
MODE
Playlist will appear.
Edit
Format
Disc > Edit > Playlist
Finalize
Disc Protect OFF ON
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Add New
Title
Delete
Playlist
JAN/1 4:00AM
JAN/1 5:00AM
2
Select “Edit” using K / L but-
tons, then press ENTER button.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
4
7
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select a desired title using K / Select “Yes” using { / B but-
.@/:
1
ABC
2
DEF
3
tons, then press ENTER but-
ton.
The name you entered will be
activated for the title.
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
CH
GHI
4
JKL
5
MNO
6
6
8
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
Disc > Edit > Playlist
DISPLAY
VCR
DVD
PAUSE
Title Delete
1
Disc > Edit > Playlist > Edit Title Name
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
A B C
1
PLAY
a b c
1 2 3
@ ! ?
STOP
REC/OTR
SETUP
TIMER PROG.
JAN/ 1 1:00AM CH12 XP
ENTER
SKIP
REC MONITOR
Yes
No
0:01:25
4
5
6
7
abc
MENU/LIST TOP MENU
RETURN
SKIP
Writing to Disc
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
This operation may take a
while to be completed.
5
Select “EditTitle Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
8
After writing to disc is com-
pleted, press SETUP to exit
DISC menu.
Disc > Edit > Playlist > Edit Title Name
A B C
a b c
1 2 3
@ ! ?
1
[
]
Guide to edit title name
[
[
]
Step1 : Select a desired character set using K L
/
buttons, then press
ENTER button.
A B C
a b c
1 2 3
@ ! ?
JAN/ 1 1:00AM CH12 XP
]
Step2 : Press Number buttons following by the list
0:01:25
below.
Select
ABC
abc
123
@ ! ?
Press
<space>
<space>
0
<space>
0
! ” # $ %
& ‘ ( ) *
+ , - . / : ;
< = > ?
@ [ ] ^
_ { | }
6
1
(*1)
(*1)
1
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
2
3
4
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
GHI
ghi
JKL
jkl
5
6
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
Disc > Edit > Playlist > Edit Title Name
7
8
A B C
a b c
1 2 3
@ ! ?
1
wxyz
9
1
*1 Press
button, character set will be changed
to the " @ " mode automatically.
!?
2
9
JAN/ 1 1:00AM CH12 XP
*2 Press
to
buttons, character set will
be changed to the previous input mode
automatically.
0:01:25
• To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
area for entering title names
• To go on to the next entering area for letters,
B
press
button.
• You can enter up to 30 letters.
When you finish entering a title
name, press ENTER button.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
Setting or clearing chapter markers
VR
DVD-RW
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
Disc > Edit > Playlist
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
2
3
.@/:
1
ABC
2
DEF
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
CH
GHI
4
JKL
5
MNO
6
Add New
Title
Delete
Playlist
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
JAN/1 4:00AM
JAN/1 5:00AM
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add any
more chapter markers.
DISPLAY
VCR
DVD
PAUSE
PLAY
4
STOP
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
REC/OTR
SETUP
TIMER PROG.
DVD
1
First:
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
1
2
3
4
5
6
Playlist menu will appear.
1
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Press SETUP button. Select
Disc > Edit > Playlist
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Disc
JAN/ 1 1:00AM CH12 XP
Edit
0:01:25
Format
Finalize
Disc Protect OFF ON
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Add
Chapter 1/1
Chapte
Original/PlayList menu will appear.
Screen:
Delete
Index P
JAN/ 1 1:00AM CH12 XP
0:01:25
6
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
Option window will appear.
<Add>:
Disc Setting
3
Select “PlayList” using { /
buttons, then press ENTER
button.
B
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Add
Chapter 1/1
Chapte
Playlist will appear.
Delete
Index P
F
Yes
No
JAN/ 1 1:00AM CH12 XP
0:01:25
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
<Delete>:
<Delete>:
The chapter marker which you
selected will be deleted.
Disc > Edit > Playlist
Title Delete
OPEN/CLOSE
POWER
1
REC SPEED AUDIO
Scene Delete
Edit Title Name
Add
Chapter 2/2
Chapte
.@/:
1
ABC
2
DEF
3
Delete
Index P
Disc > Edit > Playlist
CH
GHI
4
JKL
5
MNO
6
F
Yes
No
Title Delete
1
Scene Delete
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
JAN/ 1 1:00AM CH12 XP
Edit Title Name
Add
Chapter 2/2
Chapte
0:01:25
SPACE
0
Delete
Index P
DISPLAY
VCR
DVD
PAUSE
Yes
No
•You cannot delete the first
chapter of each title.
JAN/ 1 1:00AM CH12 XP
Writing to Disc
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
7
8
This operation may take a
while to be completed.
ENTER
SKIP
REC MONITOR
S
elect “Yes” using { / B but-
7
MENU/LIST TOP MENU
RETURN
SKIP
tons, then press ENTER button.
<Add>:
A chapter marker will be added.
CLEAR/C-RESET ZOOM
SEARCH
8
CM SKIP
MODE
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Add
Chapter 1/1
Chapte
Delete
Index P
Yes
No
JAN/ 1 1:00AM CH12 XP
Writing to Disc
This operation may take a
while to be completed.
Setting pictures for thumbnails
VR
OPEN/CLOSE
POWER
REC SPEED AUDIO
DVD-RW
2
You can set a picture to each title
for a thumbnail. It helps you to
remember the contents of the
title you are playing.The begin-
ning picture has been selected as
the default.
.@/:
1
ABC
2
DEF
3
CH
Select “Edit” using K / L but-
GHI
4
JKL
5
MNO
6
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
DVD
First:
PLAY
Disc > Edit
STOP
REC/OTR
SETUP
TIMER PROG.
1
1
ENTER
SKIP
REC MONITOR
Press SETUP button. Select
1
2
MENU/LIST TOP MENU
RETURN
SKIP
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Original
Note
Disc
Edit
• If a selected picture for a
Format
thumbnail is deleted by delet-
ing a part of a title, a default
picture will be selected.
Finalize
Disc Protect OFF ON
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
3
6
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “PlayList” using { /
buttons, then press ENTER
button.
B
Select “Yes” using { / B but-
.@/:
1
ABC
2
DEF
3
tons, then press ENTER but-
ton.
A picture for thumbnail will be
set.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Playlist will appear.
SPACE
0
Disc > Edit > Playlist
DISPLAY
VCR
DVD
PAUSE
1
2
3
Disc > Edit > Playlist
5
Title Delete
1
PLAY
Scene Delete
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Edit Title Name
Chapter Mark
Index Picture Set
STOP
Add New
Title
Delete
Playlist
REC/OTR
SETUP
TIMER PROG.
7
5
ENTER
SKIP
REC MONITOR
Yes
JAN/ 1 1:00AM CH12 XP
Writing to Disc
No
JAN/1 4:00AM
JAN/1 5:00AM
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
4
This operation may take a
while to be completed.
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
7
Playlist menu will appear.
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
JAN/ 1 1:00AM CH12 XP
0:01:25
5
Select “Index Picture Set”
using K / L buttons. Use SKIP
H / G, E, D, PLAY
B
and PAUSE F buttons to
decide the picture you want
to select as a thumbnail.Then
press ENTER button.
Option window will appear.
Disc > Edit > Playlist
Title Delete
1
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
F
Yes
No
JAN/ 1 1:00AM CH12 XP
0:01:25
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
Adding titles to a Playlist
VR
DVD-RW
4
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Add NewTitle” using
.@/:
1
ABC
2
DEF
3
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
DVD
First:
SPACE
0
Disc > Edit > Playlist > Add New Title
DISPLAY
VCR
DVD
PAUSE
1
1
2
3
PLAY
Press SETUP button. Select
JAN/10 10:30AM
JAN/12 5:00PM
JAN/12 8:00PM
STOP
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
REC/OTR
SETUP
TIMER PROG.
1
6
ENTER
SKIP
REC MONITOR
1
2
3
4
5
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
Disc
Edit
CM SKIP
MODE
Format
5
Finalize
Disc Protect OFF ON
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Disc > Edit > Playlist > Add New Title
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
58%
Writing to Disc
Original/PlayList menu will appear.
Screen:
Disc > Edit > Playlist
Disc > Edit
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
6
JAN/1 4:00AM
JAN/1 5:00AM
JAN/12 8:00PM
Original
6
3
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Select “PlayList” using { /
buttons, then press ENTER
button.
B
Playlist will appear.
To delete a title from Playlist,
refer to “Deleting titles” on page
74.
To delete a Playlist, refer to
“Deleting a Playlist” on page 82.
Disc > Edit > Playlist
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Add New
Title
Delete
Playlist
JAN/1 4:00AM
JAN/1 5:00AM
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-RW discs inVR mode (Playlist) (cont’d)
Deleting a Playlist
VR
DVD-RW
4
A Playlist can be deleted if no
longer needed.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “Delete Playlist” using
.@/:
1
ABC
2
DEF
3
DVD
K / L / { / B buttons, then
press ENTER button.
Option window will appear.
First:
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
1
SPACE
0
Disc > Edit > Playlist
Press SETUP button. Select
DISPLAY
VCR
DVD
PAUSE
1
2
3
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
PLAY
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
STOP
Add New
Title
REC/OTR
SETUP
TIMER PROG.
1
Delete
Playlist
ENTER
SKIP
REC MONITOR
Disc
Yes
No
JAN/1 4:00AM
JAN/1 5:00AM
1
2
3
4
5
Edit
MENU/LIST TOP MENU
RETURN
SKIP
Format
CLEAR/C-RESET ZOOM
SEARCH
Finalize
Disc Protect OFF ON
CM SKIP
MODE
5
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Playlist will be erased.
After writing to disc is completed,
the unit will be in stop mode.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
Disc > Edit
Original
3
Select “PlayList” using { /
buttons, then press ENTER
button.
B
Playlist will appear.
Disc > Edit > Playlist
1
12
3
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
Add New
Title
Delete
Playlist
Note
• Deleting a Playlist will not
JAN/1 4:00AM
JAN/1 5:00AM
increase the available record-
ing time on disc.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-R discs
Deleting titles
DVD-R
Disc > Edit
You can delete titles which you
do not need, however the disc
space to record on the disc will
not be changed.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
Title Delete
Edit Title Name
Chapter Mark
1
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
JAN/ 1 1:00AM CH12 XP
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
0:01:25
SPACE
0
DISPLAY
VCR
DVD
PAUSE
You cannot select “Chapter Mark”.
DVD
First:
PLAY
STOP
4
REC/OTR
SETUP
TIMER PROG.
1
6
1
Select “Title Delete” using
K
ENTER
SKIP
REC MONITOR
Press SETUP button. Select
/
L buttons, then press
MENU/LIST TOP MENU
RETURN
SKIP
1
2
3
4
5
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
ENTER button.
CLEAR/C-RESET ZOOM
SEARCH
Option window will appear.
CM SKIP
MODE
Disc > Edit
Title Delete
1
Disc
Edit Title Name
Chapter Mark
Edit
Format
Finalize
Yes
JAN/ 1 1:00AM CH12 XP
No
0:01:25
5
2
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Title will be deleted.
Titlelist will appear.
Screen:
Disc > Edit
Title Delete
1
Edit Title Name
Chapter Mark
Disc > Edit
1
2
3
Yes
No
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
JAN/ 1 1:00AM CH12 XP
Writing to Disc
JAN/1 4:00AM
JAN/1 5:00AM
This operation may take a
while to be completed.
3
6
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
Edit menu will appear.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing DVD-R discs (cont’d)
Putting names on titles
DVD-R
4
You can put names on the titles
and change the names from this
menu.
The names you put on the titles
will be displayed on a titlelist.
OPEN/CLOSE
POWER
REC SPEED AUDIO
Select “EditTitle Name”
using K / L buttons, then
press ENTER button.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
5
A window for entering a title
name will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
DVD
SPACE
0
First:
Disc > Edit > Edit Title Name
DISPLAY
VCR
DVD
PAUSE
A B C
a b c
1 2 3
@ ! ?
1
1
PLAY
STOP
Press SETUP button. Select
REC/OTR
SETUP
TIMER PROG.
1
7
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
JAN/ 1 1:00AM CH12 XP
ENTER
SKIP
REC MONITOR
0:01:25
1
2
3
4
5
6
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
Disc
CM SKIP
MODE
5
Edit
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
Format
Finalize
Disc > Edit > Edit Title Name
A B C
a b c
1 2 3
@ ! ?
1
2
[
]
Guide to edit title name
Select “Edit” using K /
L
but-
[
]
Step1 : Select a desired character set using
K
L
JAN/ 1 1:00AM CH12 XP
/
tons, then press ENTER button.
Titlelist will appear.
Screen:
buttons, then press
ENTER button.
A B C
a b c
1 2 3
@ ! ?
0:01:25
area for entering title names
When you finish entering a title
name, press ENTER button.
[
]
Step2 : Press Number buttons following by the list
below.
Select
Disc > Edit
ABC
abc
123
@ ! ?
Press
1
12
3
<space>
<space>
0
<space>
0
! ” # $ %
& ‘ ( ) *
+ , - . / : ;
< = > ?
@ [ ] ^
_ { | }
6
JAN/1 1:00AM
4
JAN/1 2:00AM
5
JAN/1 3:00AM
1
(*1)
(*1)
1
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
JAN/1 4:00AM
JAN/1 5:00AM
2
3
4
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
(*2)
GHI
ghi
Disc > Edit > Edit Title Name
JKL
jkl
5
6
3
A B C
a b c
1 2 3
@ ! ?
1
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
7
8
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
wxyz
9
Yes
No
1
*1 Press
button, character set will be changed
abc
to the " @ " mode automatically.
!?
to
Edit menu will appear.
Writing to Disc
2
9
*2 Press
buttons, character set will
be changed to the previous input mode
automatically.
Disc > Edit
• To delete letters, press CLEAR/C-RESET button
repeatedly. Holding CLEAR/C-CRESET button
to delete all letters.
This operation may take a
while to be completed.
Title Delete
1
Edit Title Name
Chapter Mark
• To go on to the next entering area for letters,
B
press
button.
• You can enter up to 30 letters.
7
JAN/ 1 1:00AM CH12 XP
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
0:01:25
You cannot select “Chapter Mark”.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Tour of the SETUP menu
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
SETUP menu
Items (highlight is the default)
Contents
1.Language setting
Pages 86-87
English
French
Spanish
Disc Menu Language
Set the language for disc menu.
Original
English
French
Audio Language
Subtitle Language
Set the language for audio.
Set the language for subtitle.
OFF
English
French
100%
OSD Background
Transparency
Set the background transparency of OSD
screen.
2.Display setting
Pages 88-89
35%
25%
OSD Background
Color
1
2
3
Set the OSD screen color.
1 (Green), 2 (Blue), 3 (Red)
OSD Language
English
Français
Español
Set the language for OSD
(On Screen Display).
Screen Saver
OFF
5 minutes
10minutes
Set the time to work the screen saver on
the screen.
PCM
Digital Out
3.Audio setting
Pages 90-91
Set whether the sound recorded in 96kHz
will be down sampled in 48kHz.
Auto
48kHz
96kHz
Dolby Digital
Set the type of sound signal which outputs
from the digital audio output jack.
PCM
Stream
Compressing the range of sound volume.
Dynamic Range
Control
ON
OFF
Outputting the sound during play in fast
forward.
Fast Forward with
Audio
ON
OFF
4.Parental setting
Pages 92-93
ALL
level 8 to 1
Set the parental level of your DVD discs.
Parental Lock
Enter the current
four-digit password
Set and change the password.
(Change password)
Note
• If you change the setting in SETUP
menu, the information of contents
stays on even when the power is
switched off.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Language
Press STOP button if you are playing a disc.
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
.@/:
1
ABC
2
DEF
3
4
Press SETUP button to display SETUP/DISC menu.
CH
GHI
4
JKL
5
MNO
6
SETUP/DISC menu will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
1
5
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
Setup Menu
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
2
CM SKIP
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { /
B
buttons, then press
ENTER button.
Option window will appear.
DVD
Setup > Playback
TV Aspect
4:3 Letter Box
All
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Dynamic Range Control
Fast Forward with Audio
ON
OFF
4
Select a desired item using K / L buttons, then press
Note
ENTER button.
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Language (cont’d)
Disc Menu Language (Default : English)
Set the language for Disc Menu.
•
Select a setting using K /
buttons, then press ENTER
button.
L
DVD
Setup > Playback
DVD
Setup > Playback
TV Aspect
4:3 Letter Box
All
TV Aspect
4:3 Letter Box
All
Parental Lock
Parental Lock
Your setting will be activated.
English
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
French
Spanish
Other
Dynamic Range Control
Fast Forward with Audio
ON
Dynamic Range Control
Fast Forward with Audio
ON
OFF
OFF
Audio Language (Default : Original)
Set the Audio language.
•
Select a setting using K /
buttons, then press ENTER
button.
L
DVD
DVD
Setup > Playback
Setup > Playback
TV Aspect
TV Aspect
4:3 Letter Box
All
4:3 Letter Box
All
Parental Lock
Parental Lock
Original
Your setting will be activated.
English
Original
OFF
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
French
Spanish
Other
Dynamic Range Control
Fast Forward with Audio
ON
Dynamic Range Control
Fast Forward with Audio
ON
OFF
OFF
Subtitle Language (Default : OFF)
Set the subtitle language.
•
Select a setting using K /
buttons, then press ENTER
button.
L
DVD
DVD
Setup > Playback
Setup > Playback
TV Aspect
TV Aspect
4:3 Letter Box
All
4:3 Letter Box
All
Parental Lock
Parental Lock
OFF
Your setting will be activated.
English
Original
OFF
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
French
Other
Spanish
Dynamic Range Control
Fast Forward with Audio
ON
Dynamic Range Control
Fast Forward with Audio
ON
OFF
OFF
If “Other” is selected, press 4-digit code using number buttons.
All
English
•
When you finish entering
the code, press ENTER
button. Refer to the lan-
guage code table on page
101.
age
French
Spanish
e
Other
Code Input
- - - -
Control
ON
5
Press SETUP button to exit SETUP menu.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Display
Press STOP button if you are playing a disc.
OPEN/CLOSE
POWER
REC SPEED AUDIO
1
.@/:
1
ABC
2
DEF
3
Press SETUP button to display SETUP/DISC menu.
CH
GHI
4
JKL
5
MNO
6
SETUP/DISC menu will appear.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
PLAY
STOP
1
5
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
Setup Menu
REC MONITOR
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
2
CM SKIP
MODE
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Display” using K / L / { /
B
buttons, then press
ENTER button.
Option window will appear.
DVD
Setup > Display
OSD Background Transparency
OSD Background Color
OSD Language
35%
1
English
10 minutes
Screen Saver
4
Select a desired item using K / L buttons, then press
ENTER button.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Display (cont’d)
OSD BackgroundTransparency (Default : 35%)
Set the background transparency of OSD screen.
You can choose one among 0% through 100%.
•
Select a setting using K /
buttons, then press ENTER
button.
L
DVD
Setup > Display
DVD
Setup > Display
OSD Background Transparency
OSD Background Color
OSD Language
35%
100%
OSD Background Transparency
OSD Background Color
OSD Language
85%
70%
1
Your setting will be activated.
English
10 minutes
50%
Screen Saver
Screen Saver
s
35%
25%
10%
0%
OSD Background Color (Default : 1 Green)
Set the OSD screen color.
You can choose one among 1(Green), 2(Blue), and 3(Red).
•
Select a setting using K /
buttons, then press ENTER
button.
L
DVD
Setup > Display
DVD
Setup > Display
OSD Background Transparency
OSD Background Color
OSD Language
35%
OSD Background Transparency
OSD Background Color
OSD Language
35%
1
2
1
Your setting will be activated.
English
10 minutes
3
Screen Saver
Screen Saver
10 minutes
OSD Language (Default : English)
Set the language for OSD.
•
Select a setting using K /
buttons, then press ENTER
button.
L
Setup > Display
VCR DVD
Setup > Display
VCR DVD
OSD Background Transparency
OSD Background Color
OSD Language
35%
OSD Background Transparency
OSD Background Color
OSD Language
35%
1
1
Your setting will be activated.
English
English
10 minutes
Français
Screen Saver
Screen Saver
es
Español
Screen Saver (Default : 10 minutes)
Set the time to work the screen saver function on the screen.
•
Select a setting using K /
buttons, then press ENTER
button.
L
DVD
Setup > Display
DVD
Setup > Display
OSD Background Transparency
OSD Background Color
OSD Language
35%
OSD Background Transparency
OSD Background Color
OSD Language
35%
1
1
OFF
Your setting will be activated.
English
10 minutes
5 minutes
Screen Saver
Screen Saver
10 minutes
s
15 minutes
30 minutes
5
Press SETUP button to exit SETUP menu.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Audio
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Press STOP button if you are playing a disc.
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
1
SPACE
0
Press SETUP button to display SETUP/DISC menu.
DISPLAY
VCR
DVD
PAUSE
SETUP/DISC menu will appear.
PLAY
STOP
1
5
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
Setup Menu
CM SKIP
MODE
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { /
B
buttons, then press
ENTER button.
Option window will appear.
DVD
Setup > Playback
TV Aspect
4:3 Letter Box
All
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Dynamic Range Control
Fast Forward with Audio
ON
OFF
4
Select a desired item using K / L buttons, then press
ENTER button.
Note
• Dynamic Range Control func-
tion is available only on the
discs which are recorded in
the Dolby Digital format.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Audio (cont’d)
Digital Out
Set the digital audio output.
•
Select a setting using K /
L
buttons, then press ENTER
button.
DVD
Setup > Playback
DVD
Setup > Playback
TV Aspect
4:3 Letter Box
All
TV Aspect
4:3 Letter Box
All
Parental Lock
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Option window will appear.
Proceed to steps A or B.
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
PCM
Dynamic Range Control
Fast Forward with Audio
Dynamic Range Control
Fast Forward with Audio
ON
Dolby Digital
OFF
OFF
Settings for PCM (Default :Auto)
A
•
Select a setting using K / L buttons, then
press ENTER button.
Original
OFF
Note
When playing disc with
copyright protection
• If you select “Auto”, the
sound will be down sam-
pled at 48kHz.
Your setting will be activated.
Auto
: Select “Auto” usually.
PCAuto
48kHz : If your amplifier/decoder is NOT com-
patible with 96kHz PCM, select “48kHz”.
96kHz sound will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible
with 96kHz PCM, select “96kHz”. 96kHz
sound will be output.
48kHz
ntrol
udio
Dol
96kHz
•
If you select “96kHz”, no
digital sound will be output.
Select “Auto”, so that out-
putting 48kHz digital sound.
Settings for Dolby Digital (Default : Stream)
B
OFF
PCM
• Select a setting using K / L buttons, then press ENTER button.
Your setting will be activated.
PCM : Convert the Dolby Digital into PCM(2 channel).
When your amplifier/decorder is NOT compatible with Dolby Digital,
set to “PCM”.
ntrol
udio
Do
PCM
Stream
Stream : Outputs a Dolby Digital signals.
When your amplifier/decorder is compatible with Dolby Digital, set to
“Stream”.
Dynamic Range Control (Default : ON)
Set to ON to compress the range between soft and loud sounds.
DVD
Setup > Playback
DVD
Setup > Playback
•
Select a setting using K /
buttons, then press ENTER
button.
L
TV Aspect
4:3 Letter Box
All
TV Aspect
4:3 Letter Box
All
Parental Lock
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Your setting will be activated.
ON
O
Dynamic Range Control
Fast Forward with Audio
ON
Dynamic Range Control
Fast Forward with Audio
OFF
OFF
OFF
Fast Forward with Audio (Default : OFF)
Set to ON to output the sound during playback in fast forward of x2.
DVD
Setup > Playback
DVD
Setup > Playback
•
Select a setting using K /
buttons, then press ENTER
button.
L
TV Aspect
4:3 Letter Box
All
TV Aspect
4:3 Letter Box
All
Parental Lock
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Your setting will be activated.
Dynamic Range Control
Fast Forward with Audio
ON
Dynamic Range Control
Fast Forward with Audio
ON
ON
OFF
O
OFF
5
Press SETUP button to exit SETUP menu.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Parental lock level
Some DVD-Video discs feature a Parental Lock level. Playback
will stop if the ratings exceed the levels you set, it will require
you to enter a password before the disc will playback.This fea-
ture prevents your children from viewing inappropriate materi-
als.
OPEN/CLOSE
POWER
REC SPEED AUDIO
.@/:
1
ABC
2
DEF
3
4
CH
GHI
4
JKL
5
MNO
6
Press STOP button if you are playing a disc.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
1
PLAY
Press SETUP button to display SETUP/DISC menu.
STOP
SETUP/DISC menu will appear.
1
5
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
2
3
4
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
CM SKIP
MODE
Setup Menu
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
Setup
Playback Setting
3
Select “Playback” using K / L / { /
B
buttons, then press
ENTER button.
Option window will appear.
DVD
Setup > Playback
Note
TV Aspect
4:3 Letter Box
All
Parental Lock
• Parental lock function may
not be available to some
discs.
• With some DVDs, it may be
difficult to find if they are
compatible with parental lock.
Be sure to check if the
parental lock function oper-
ates in the way that you have
set.
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Dynamic Range Control
Fast Forward with Audio
ON
OFF
4
Select “Parental Lock” using K / L buttons, then press
ENTER button.
• Record the password in case
you forget it.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the SETUP menu
Settings for Parental lock level (cont’d)
Parental Lock (Default :All)
Set the Parental Lock level.
•
Change the parental level
using K / L buttons, then
press ENTER button.
DVD
Setup > Playback
DVD
Setup > Playback
TV Aspect
4:3 Letter Box
All
TV Aspect
etter Box
All
Parental Lock
8
7
6
5
4
3
Parental Lock
Option window will appear.
Proceed to steps A or B.
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
English
Original
OFF
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
lish
inal
2
Dynamic Range Control
Fast Forward with Audio
ON
Dynamic Range Control
Fast Forward with Audio
1
OFF
OFF
A password has not been set yet
A
•
Select “Yes” using s /
B
DVD
Setup > Playback
DVD
Setup > Playback
buttons, then enter a new
password using Number
buttons.
TV Aspect
Change Password?
Yes
TV Aspect
Password
Yes
No
- - - -
8
Parental Lock
Parental Lock
7
7
6
5
4
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
ish
6
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
ish
inal
inal
5
4
3
Your setting will be activated.
3
2
2
Dynamic Range Control
Fast Forward with Audio
1
Dynamic Range Control
Fast Forward with Audio
1
OFF
OFF
• If you select “No”, proceed
to Step 5.
A password has been set already
Change the password
B
DVD
DVD
Setup > Playback
Setup > Playback
DVD
Setup > Playback
TV Aspect
TV Aspect
etter Box
All
Change Password?
TV Aspect
Password
Yes
Yes
No
- - - -
Password
Parental Lock
Parental Lock
Parental Lock
* * * *
7
7
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
ish
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
ish
6
Disc Menu Language
Audio Language
ish
6
6
inal
nal
nal
5
5
5
4
4
4
Subtitle Language
Digital Out
3
3
3
2
2
2
Dynamic Range Control
Fast Forward with Audio
1
Dynamic Range Control
Fast Forward with Audio
1
Dynamic Range Control
Fast Forward with Audio
1
OFF
OFF
OFF
• If you select “No”, proceed
to Step 5.
•
Enter the current password
using Number buttons.
•
Select “Yes” using s /
B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
Note
• Press CLEAR/C-RESET but-
ton to erase numbers entered
incorrectly.
• When you forget the pass-
word or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
5
Press SETUP button to exit SETUP menu.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR functions
Playback
VCR
OPEN/CLOSE
POWER
REC SPEED AUDIO
3
1
1
.@/:
1
ABC
2
DEF
3
During playback, press
CH
GHI
4
JKL
5
MNO
6
Press POWER button on the
remote control or the front
panel of the unit.
PAUSE F button.
Playback will pause and sound will
be muted.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
When you are playing a tape, turn
the TV on and be sure to select
the input to which the unit is con-
nected.
DISPLAY
VCR
DVD
PAUSE
3
5
4
PLAY
2
4
STOP
Press PLAY B button to
REC/OTR
SETUP
TIMER PROG.
VCR
resume play.
Press:
Note
5
2
• When a tape without record
tab is inserted, the unit will
start playback automatically.
• Tracking will be automatically
adjusted upon playback.To
adjust the tracking manually,
press the CHANNEL K/L
buttons on the front panel of
the unit or CHK/CHL but-
tons on the remote control.
Insert a prerecorded tape,
Press STOP C button to stop
playback.
then press PLAY B button to
begin playback.
6
Press STOP/EJECT
C
A but-
ton on the front panel of the
unit to eject the tape.
Recording and One-touch timer recording
PQRS
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Recording
7
SPACE
0
VCR
First:
VCR
DISPLAY
VCR
DVD
PAUSE
1
2
Before recording, make sure:
PLAY
•
The desired channel is selected
by pressing Number buttons on
the remote control or CHAN-
1
STOP
Press REC/OTR button to
begin the recording.
REC/OTR
SETUP
TIMER PROG.
1
ENTER
REC MONITOR
NEL K/L buttons on the front
panel of the unit.
To temporarily stop recording or
to resume it, press PAUSE F but-
ton.After the unit has been in
Pause mode for 5 minutes, it will
stop automatically to protect the
tape and the video head from
damage.
Note
•
•
There is a tape with a record tab
in the unit.
• To view one channel while
recording another
The desired recording speed is
selected in SP (standard play) or
SLP (super long play) mode by
pressing REC SPEED button on
the remote control.
1) While you are recording on
the unit, pressVIDEO/TV but-
ton.
2) At the cable box or satel-
lite box, select the channel
you want to view.
If you have connected the unit to
a cable box or satellite box, refer
to “Connection to a Cable Box
or Satellite Box” section on page
14.
If OTR is finished inVCR during
playback or REC mode in DVD, the
VCR will be in STOP mode and the
DVD keeps the current mode.
2
Recording speed:
Tape speed
Type of tape
SP mode
Recording/PlaybackTime
Press STOP button when the
recording is completed.
T60
T120
2hours
6hours
T160
2-2/3hours
8hours
1hour
3hours
SLP mode
Accidental erasure prevention
To prevent accidental recording
on a recorded cassette, remove
its record tab.To record on it
later, cover the hole with cello-
phane tape.
•
•
Stereo or SAP is selected.
Refer to page 34 for instructions
on timer recording.
Record tab
•
94
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR functions
Recording and One-touch timer recording (cont’d)
One-touch timer recording
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
VCR
SPACE
0
This feature allows you to set the
recording length simply by pressing
REC/OTR button on the remote
control or the front panel of the unit.
DISPLAY
VCR
DVD
PAUSE
(0:30)
(1:00)
(Normal recording)
(8:00)
(7:30)
PLAY
STOP
When one-touch timer recording
is finished, the unit will turn off
automatically.
1
REC/OTR
SETUP
TIMER PROG.
RETURN
VCR
First:
1
ENTER
REC MONITOR
MENU/LIST TOP MENU
1
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
Note
During normal recording,
press REC/OTR button to
begin one-touch timer
recording.
• The remaining recording time
will appear on the display
panel during an OTR. Press
DISPLAY button to see it on
the TV screen.
You can select a fixed recording
time by pressing the REC/OTR
button repeatedly.
•You cannot pause an OTR.
Search
Index search
OPEN/CLOSE
POWER
REC SPEED AUDIO
VCR
.@/:
1
ABC
2
DEF
3
3
An index mark will be assigned at
the beginning of each recordings
you make.You may skip to a specif-
ic marked point by following the
steps below.
CH
GHI
4
JKL
5
MNO
6
2
1
Press g/h buttons to
start index search.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press h button.
After index search, theVCR will
play the tape automatically.
CURRENT PROGRAM
DISPLAY
VCR
DVD
PAUSE
3
VCR
First:
PLAY
STOP
REC/OTR
SETUP
TIMER PROG.
1
ENTER
SKIP
REC MONITOR
Press SEARCH MODE button
so that the index search
menu appears.
MENU/LIST TOP MENU
RETURN
SKIP
Beginning
of tape
End
of tape
CLEAR/C-RESET ZOOM
SEARCH
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
CM SKIP
MODE
2
INDEX MARK
Enter the number of record-
ings you wish to skip using
Number buttons with in 30
seconds.
Note
INDEX SEARCH
03
• Every time a tape is recorded,
an index mark is written on
the tape.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR functions
Search (cont’d)
Time search
VCR
TIME SEARCH
2:50
OPEN/CLOSE
POWER
REC SPEED AUDIO
This feature allows you to go to a
specific point on a tape by entering
the exact amount of time you wish
to skip in order to reach the point.
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
2
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
VCR
First:
DISPLAY
VCR
DVD
PAUSE
3
3
PLAY
1
Press g/h buttons to
start time search.
If you want to go in the forward
STOP
Press SEARCH MODE button
repeatedly so that theTime
search menu appears.
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
direction, press
If you want to go in the reverse
direction, press button.
g
button.
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
h
2
CM SKIP
MODE
After time search, the unit will play
the tape automatically.
Enter your desired time to
skip using Number buttons
with in 30 seconds.
Note
• These functions are not avail-
able during recording.
• Press STOP button to stop the
search.
•
If the end of the tape is reached
during a Search, this unit will cancel
the search and rewind the tape.
Other operations
VCR
VCR
First:
To cue or review picture during playback (Picture Search):
Press g/h buttons during playback.
Press it again and the unit will search in super high speed. (in the SLP
mode only)
To freeze the picture onTV screen during playback (Still mode):
Note
Press PAUSE F button. Each time you press the button, the picture will
be forwarded by one frame.
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the tape and the video head.
• To return to playback from
the Picture Search/Still/Slow
mode, press PLAY button.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Press CLEAR/C-RESET button.
To playback in slow motion:
Your Selection
HIFI
MONO
Monaural
L+R
Press SLOW
button during playback or the still mode.
L-channel
R-channel
Type of recorded tape
If the noise bars appear on the TV screen, you can reduce it by pressing
non Hi-Fi tapes
Monaural
Monaural
CHANNEL K/L or CHK/CHL buttons.
Hi-Fi tapes
recorded in
Hi-Fi stereo
L
R
Hi-Fi tapes
recorded main
audio program
When you playback a tape recorded in Hi-Fi stereo:
Main audio
program
Main audio
program
Main audio
program
Press AUDIO button on the remote control to select Hi-Fi or MONO
Hi-Fi tapes
recorded second
audio program
Second audio Second audio Second audio
program program program
for playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting
Before requesting service for this unit, check the table below for a possible cause of the problem you are
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and
restore proper operation.
Symptom
Power
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
Picture
There is no picture.
• Re-connect the connecting cord securely.
• The connecting cords are damaged.
• The Setup Display appears. Press SETUP or RETURN button
to turn off the display.
• Check the connection to yourTV (page 13).
• Check the RF output channel when you view aTV program
using RF connection.
• Switch the input selector on yourTV (such as to "LINE1") so
that the signal from this unit appears on theTV screen.
Picture noise appears.
• The disc is dirty or flawed.
• Head cleaning forVCR may be necessary.
Refer to “AUTO HEAD CLEANING”.
•
If the picture output signal from the unit passes through yourVCR
to get to yourTV, or if you are connected to a combination
TV/VIDEO player, the copy-protection signal applied to some DVD
programs could affect picture quality. If you still experience this
problem even when you connect the unit directly to yourTV, try
connecting the unit to yourTV's S-VIDEO input.
• Adjust tracking control for better picture by pressing
CHANNEL (o /p) buttons on this unit or CH (o /p)
buttons while you are playing a video tape.
TV program reception does not fill the
screen.
• Try to set the channels with "Auto Preset" in SETUP menu
(page 18).
•
Select a channel of anyTV program using the CH
o
/
p
buttons.
• PressVIDEO/TV button if necessary.
TV program pictures are distorted.
TV channels cannot be changed.
• AdjustTV antenna.
• Adjust the picture (see theTV's instruction manual).
• Place the unit andTV farther apart.
• Place theTV and any bunched antenna cables farther apart.
• Switch the input toTV.
• Connect the antenna cable correctly (page 13).
The playback picture orTV program from • If the playback picture output from a DVD player,VCR, or tuner
the equipment connected through the
unit is distorted.
goes through the unit before reaching yourTV, the copy-
protection signal applied to some programs could affect picture
quality. Disconnect the playback equipment in question and
connect it directly to yourTV.
Sound
There is no sound.
• The disc is dirty or flawed.
• Re-connect all connections securely.
• The connecting cord is damaged.
• Check the connections to the amplifier input.
• The input source setting on the amplifier is incorrect.
• The unit is in pause mode or in Slow-motion Play mode.
• The unit is in fast forward or fast reverse mode.
•
If the audio signal does not come through the DIGITAL AUDIO OUT
(COAXIAL) jack, check the Audio Setup settings (pages 90-91).
• The disc is dirty or flawed.
Sound is noisy.
• When playing a DTS-CD, noise may come from the speakers.
This unit is not compatible with DTS-CD.
No DTS sound is output
• This unit is not compatible with DTS sound.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (cont’d)
Remedy
Symptom
Playback
• No disc is inserted.
The disc does not play.
• A blank disc is inserted.
• No cassette tape is inserted.
•
The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play certain discs (such as a CD-ROM) (page
43).
• The region code on the DVDVIDEO does not match the unit
(page 43).
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on at least for 2 hours until the moisture
evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot
play the disc if it was not finalized (page 41).
The disc does not start playback from the • Resume play was activated (page 48). Press STOP C button
beginning.
twice.
• You have inserted a disc whoseTitle menu or DVD menu
automatically appears on theTV screen when it is first insert.
The unit starts playing from the disc
automatically.
• The DVDVIDEO features an auto playback function.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
•
Depending on the disc, you may not be able to do some of the
operations above. See the instruction manual supplied with the disc.
• Multilingual tracks are not recorded on the DVDVIDEO,
DVD-R or DVD-RW being played.
• The DVDVIDEO prohibits the changing of the language for the
sound track.
• Try changing the language using the DVDVIDEO's menu.
The language for the sound track cannot
be changed.
The subtitle language cannot be changed
or turned off.
• Multilingual subtitle are not recorded on the DVDVIDEO.
• The DVDVIDEO prohibits changing of the subtitles.
• Try changing the subtitle using the DVDVIDEO's menu.
• Multi-angles are not recorded on the DVDVIDEO being played.
• You are trying to change the angles when
appear on theTV screen (page 58).
• The DVDVIDEO prohibits changing angles.
• Try changing the angle using the DVDVIDEO's menu.
The angles cannot be changed.
icon does not
Recording/Timer recording/Editing
The channel cannot be changed from the
channel you are recording.
• Set theTV's input to "TV."
Recording does not start immediately
after you press REC/OTR button.
• An unused DVD-R or DVD-RW was inserted. It takes a while
for the unit to automatically format a DVD-RW.
• Make sure the tape has a safety tab when you record to a
cassette tape. If needed, cover the hole with cellophane tape.
•There was a power failure during recording.
• The units internal clock stopped due to a power failure that
lasted for more than 30 seconds.
Nothing was recorded even though you
set the timer setting correctly.
Reset the clock (pages 22-23).
• Disconnect the AC power cord from the AC outlet, and
connect it again.
•
The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that was set
later or has priority.
Recording does not stop immediately
after you press STOP C button.
• It will take a few seconds for the unit to input disc data before
recording can stop.
Timer recording is not complete or did
not start from the beginning.
• The timer setting overlapped with another setting that was set
later or has priority (page 36).
• Disc space was not enough.
•
Make sure indicator appears on the front display of this unit. If not,
press POWER button.
Timer recording is impossible.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (cont’d)
Remedy
Symptom
Remote control
The remote control does not function.
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Turn on the unit.
•
•
The remote control is not pointed at the remote sensor on the unit.
Press the DVD orVCR button, whichever you need.Then, try again.
• Check if a cassette tape is in this unit.
Others
The unit does not operate properly.
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
"Repairing" appears on the display.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the DVD recorder on again.
It may take several minutes up to about four hours.
Repairing
Error message
Cause
Solution
Disc Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
Unplayable disc is inserted
in the unit.
Insert the standardized disc which
bear the marks on page 43.
Region Error
Playback is not authorized
in the region of the DVD-Video
disc which you inserted in the unit.
Insert the DVD-Video disc with
region codes 1 or ALL.
--- Please eject the disc. ---
Playback is not authorized in your
region.
Parental Lock On
--- Please eject the disc. ---
The current selected parental level
Prohibits playback.
The current selected parental
level in the SETUP Menu
prohibits playback.
Check the "Parental Lock" setting
(pages 92-93).
Recording Error
The recording function encountered
the copy prohibited program.
You cannot record copy prohibited
programs.
This program is not allowed
to be recorded.
Recording Error
This program is not
recordable inVideo mode.
You are trying to record the copy-
once program onto the DVD-RW
disc inVideo mode.
Set "DVD-RW Recording Format"
to "VR mode" (page 28).
Recording Error
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements (pages 26-42).
Can not record on this disc.
Recording Error
You are trying to record the copy-
once program onto the DVD-RW
disc which is not compatible with
CPRM.
Insert the DVD-RW disc
(ver.1.1 compatible with CPRM).
This program is not allowed to
be recorded on this disc.
Recording Error
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Release the disc protect setting
in the Disc Setting menu (page 42).
This disc is protected and not
recordable.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Troubleshooting (cont’d)
Cause
Error message
Solution
Recording Error
Disc is full.
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
(No area for new recording)
Recording Error
You are trying to record onto the
disc on which the number of
recording titles comes up to the
maximum (99).
Delete unnecessary titles
(pages 61, 65, 74).
You cannot record more
than 99 titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more the
999 chapters on one disc.
You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (999).
Delete unnecessary chapter
markers (pages 69, 78).
(The maximum is 999)
Recording Error
This disc has no space to write
the Control Information when
recording or deleting contents.
Delete unnecessary titles
(pages 61, 65, 74).
You cannot record on this disc
as Control Information is full.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.
Recording Error
This disc's working area for
recording is full.
Insert a new disc.
You cannot record on the
disc as Power Calibration
Area is full.
When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
Recording Error
You are trying to record onto
the disc already finalized.
Release the finalizing for this disc
(page 41).
This disc is already finalized.
* If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description for calling our help line mentioned on the front page to locate an Authorized service center.
RF converter output
You can watch the TV programs with the tuner of
1
2
3
CH
GHI
4
JKL
5
MNO
6
the unit. (Usually channel 3 or 4 of the TV is available
for the RF converter setting.) Be sure to connect the
unit to a TV using the RF cable. Refer to page 13.
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
OPEN/CLOSE
POWER
SPACE
0
REC SPEED AUDIO
DISPLAY
VCR
DVD
PAUSE
.@/:
1
ABC
2
DEF
3
CH
GHI
4
JKL
5
MNO
6
for more than
3 seconds
1
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
2
Select channel 3 on yourTV.
SPACE
0
• Be sure that the unit is in DVD mode.
DISPLAY
VCR
DVD
PAUSE
3 seconds
PLAY
(
(
(
)
2
RF on CH3
STOP
PressVIDEO/TV button on the remote control.
• If noise appears, change the RF output channel of
the unit to CH 4 by pressingVIDEO/TV button
for 3 seconds.The RF output channel will alter-
nates between CH3 and CH4 as follows.
3 seconds
3 seconds
3 seconds
REC/OTR
SETUP
TIMER PROG.
ENTER
SKIP
REC MONITOR
)
RF on CH4
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
)
RF on CH3
CM SKIP
MODE
•
Changing the RF output channel is available only
when the unit is in DVD mode.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Language code
Language
Code
Language
Code
Language
Code
(Afan) Oromo
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
6159
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
Hindi
5455
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6247
6265
5247
6258
6266
6367
6459
6461
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Yiddish
Yoruba
Zulu
Hebrew
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Glossary
Dolby Digital
Analog audio
Regions code
An electrical signal that directly
represents sound. Compare this
to digital audio which can be an
electrical signal, but is an indirect
representation of sound. See also
Digital audio.
The system to compress digital
sound developed by Dolby
Laboratories. It offers you sound
of stereo(2ch) or multi-channel
audio (up to 5.1ch).
Regions associate discs and play-
ers with particular areas of the
world.This unit will only play discs
that have compatible region
codes.You can find the region
code of your unit by looking on
the rear panel. Some discs are
compatible with more than one
region (or all regions).
MP3 (MPEG Audio Layer 3)
Aspect ratio
MP3 is a method of compressing
files.You can copy MP3 files on
The width of a TV screen relative
to its height. Conventional TVs are CD-R/RW discs from the comput-
4:3 (in other words, the screen is
almost square); widescreen models
are 16:9 (the screen is almost
twice as wide as it is high).
Sampling frequency
er and play the files on this unit.
The rate which sound is measured
by a specified interval to turn into
digital audio data.The numbers of
sampling in one second defines as
sampling frequency.The higher the
rate, the better the sound quality
as possible as it is.
Finalize
To make DVD discs, which have
done recording, possible to play in
DVD players.With this unit, it is
possible to finalize DVD-R/DVD-
RW discs.
Chapter
Just as a book is split up into sev-
eral chapters, a title on a DVD
disc is usually divided into chap-
ters. See also Title.
SAP
PCM
(Secondary Audio Program)
(Pulse Code Modulation)
Component video output
Sub-audio channel which is deliv-
ered separately from main-audio
channel.This audio channel is used
as an alternate in bilingual broad-
casting.
The most common system of
encoding digital audio, found on
CDs and DAT. Excellent quality,
but requires a lot of data com-
pared to formats such as Dolby
Digital and MPEG audio. For com-
patibility with digital audio
recorders (CD, MD and DAT) and
AV amplifiers with digital inputs,
this unit can convert Dolby Digital
and MPEG audio to PCM. See also
Digital audio.
Each signal of luminance(Y) and
component(PB/CB, PR/CR) is inde-
pendent to output so that you can
experience picture color as it is.
CPRM
(Content Protection for
Recordable Media)
S-Video output
It delivers independently each sig-
nal of color(C) and luminance(Y)
to TV as video signals, so that
higher-quality picture will be
gained.
CPRM is a copy protection sys-
tem with scramble system regard-
ing the recording of “copy-once”
broadcast programs (e.g. some
satellite broadcasts).
Title (DVD only)
Playlist
A collection of chapters on DVD
disc. See also chapter.
Digital audio
From this list you can play con-
tents of a disc as your desired
order or in sequence.Also it is
allowed to search a specific scene
directly.
An indirect representation of
Track
sound by numbers. During record-
ing, the sound is measured at dis-
crete intervals (44, 100 times a
second for CD audio) by an ana-
log-to-digital converter, generating
a stream of numbers. On playback,
a digital-to-analog converter gen-
erates an analog signal based on
these numbers. See also Sampling
frequency and Analog audio.
Audio CDs use tracks to divide
up the content of a disc.The DVD
equivalent is called a chapter. See
also Chapter.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Specifications
General
System
DVD-Video, DVD-R/RW, CD-DA, CD-R/RW,
Video CassetteTape
Four heads
VCR video heads
Power requirements
Power consumption
Weight
AC120V, 60 Hz
37W (standby: 4.3W)
9.5 lbs ( 4.3 kg )
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
17 3/16" x 3 15/16" x 10 5/16" (435 x 100 x 261 mm)
41Fº to 104Fº (5ºC to 40ºC)
5% to 85% (no condensation)
NTSC
Tuner
Receivable channels
VHF
2-13ch
UHF
CATV
14-69ch
C1-C125ch
RF Converter
Converter output
Built-inVHF converter
VHF channel 3 or 4
Note:
The specifications and design of this product are subject to change without notice.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Français
Enregistrement simple de DVD
Ce qui suit permettra de comprendre facilement comment enregistrer sur des disques DVD.
Remarque :
Vérifier la présence de piles dans la télécommande et le raccordement correct de cet appareil et du téléviseur.
Étape 1 :
Étape 2 :
Étape 3 :
Choisir un type de disque
Insérer un
Sélectionner la vitesse
d’enregistrement
Il y a plusieurs types de disques DVD
disque vierge
Mettre l’appareil sous ten-
enregistrables. Choisir un type de disque
DVD enregistrable sur la base de ses propres
besoins de lecture/enregistrement/montage.
Voir “Types de disque DVD” au bas de cette
page pour les détails sur les différences entre
les divers genres de supports compatibles.
Cet appareil peut enregistrer sur les
types de disques suivants.
1
2
sion.
Pour sélectionner le
mode DVD
1
Ouvrir le tiroir à
disque.
Fermer le tiroir à
Pour sélectionner la
vitesse d’enregistrement
3
disque.
2
Télécommande
1
2
2
CLOSE
POWER
OPEN/CLOSE
POWER
REC SPEED A
REC SPEED AUDIO
(ou)
.@/:
1
ABC
2
DEF
3
.@/:
1
DEF
CH
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Cet appareil ne peut pas enregistrer sur
les disques suivants.
SPACE
0
DISPLAY
VCR
DVD
US
• DVD-RWVer 1.2/2-4x compatible
CPRM
1
PLAY
• DVD-R ordinaireVer 2.0/8x
STOP
OPEN/CLOSE
POWER
REC/OTR
SETUP
TIMER PROG.
REC SPEED AUDIO
Par exemple, pour enregistrer à
répétition sur le même disque, ou
pour éditer le disque après l’enre-
gistrement, sélectionner un disque
de type DVD-RW réinscriptible.
.@/:
1
ABC
2
DEF
3
SP 2:01 Rem.
Loading
Pour sauvegarder des enregistre-
ments sans aucune modification,
un DVD-R non-inscriptible peut
faire l’affaire.
La reconnaissance de
cette opération peut
exiger un certain temps.
Formatage du disque
Insérer le disque dans
l’appareil. Puis, formater le
disque au menu
Types de disques DVD
CONFIGURER. Le format
Vidéo (modeVidéo) ou le
format d’enregistrement
vidéo (modeVR) sera
disponible selon le type de
disque inséré. Cela est
nécessaire pour préparer le
disque pour l’enregistre-
ment.Voir les détails aux
pages 28-30.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Français
Enregistrement simple de DVD (suite)
Étape 4 :
Étape 5 :
Étape 6 :
Sélectionner la
chaîne souhaitée
Enregistrer sur
des disques DVD
Arrêter l’enregistrement.
PQRS
TUV
WXYZ
VIDEO/TV
7
8
9
SPACE
0
SLOW
1
2
3
CH
GHI
4
JKL
5
MNO
6
DISPLAY
VCR
DVD
PAUSE
OPEN/CLOSE
POWER
REC SPEED AUDIO
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
.@/:
1
ABC
2
DEF
3
PLAY
SPACE
0
CH
STOP
GHI
4
JKL
5
MNO
6
DISPLAY
VCR
DVD
PAUSE
REC/OTR
SETUP
TIME
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
ENTER
REC MONITOR
SPACE
0
PLA
DISPLAY
VCR
DVD
PAUSE
REC/OT
SETUP
TIMER PROG.
RETURN
58%
ENTER
REC MONITOR
Writing to Disc
PLAY
STOP
MENU/LIST TOP MENU
CH 1
Cette opération peut
I
demander un certain temps.
Conseil 1: Lire le contenu enregistré
Le titre à lire peut être sélectionné au menu affiché, et la lecture
peut commencer immédiatement. Le contenu enregistré est très
accessible sur un disque, la procédure est vraiment simple,
comme si on choisissait un titre de chapitre à l’écran de menu.
Démarrer enr.
Arrêt/Démarrer
Titre 2
Arrêter enr.
Titre 1
Qu’est-ce que titres et chapitres?
Les matériaux du disque DVD sont généralement divisés en
plusieurs titres. Les titres peuvent encore être subdivisés en
chapitres.
Chapitre 1 Chapitre 2 Chapitre 3 Chapitre 1 Chapitre 2
Conseil 2: Monter le disque enregistré
Le montage des disques est très simple; cet appareil offre des fonctions de montage pratiques, utilisables seule-
ment avec les disques DVD-R/RW.
Ce qui suit peut être monté à partir d’une liste de titres.
• Dénomination de titres
• Réglage d’images pour les images miniatures (modeVR)
• Réglage/suppression de marques de chapitres
• Suppression de parties de titres (modeVR)
Suppression de titre : Supprime de façon permanente toute une scène du disque.
Suppression de scène : Permet à l’utilisateur le montage à l’intérieur d’une scène spécifique (par ex. publicité).
Original et Playlist (modeVR)
Il est possible de monter les enregistrements dans la Playlist sans changer les enregistrements originaux. Une
Playlist n’utilise pas beaucoup d’espace du disque.
À quoi servent “Original” ou “Playlist”?
Dans ce manuel, Original et Playlist seront utilisés pour référer aux matériaux réels et à la version montée.
•
Les matériaux Original réfèrent à ce qui est réellement enregistré sur le disque.
• Les matériaux Playlist réfèrent à la version montée du disque; comment les matériaux Original
seront lus.
Finalisation d’un disque
• Permet la lecture d’un disque enregistré sur cet appareil sur un lecteur de DVD différent
– sans finalisation, la lecture sur un autre lecteur est impossible.
• Après la finalisation d’un disque, si l’enregistrement a été fait en mode vidéo, il sera
imposible de monter toute information sur ce disque.
• En cas d’enregistrement en modeVR sur un disque DVD-RW, le montage est encore pos-
sible après la finalisation.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Français
Lecture avec magnétoscope
VCR
OPEN/CLOSE
POWER
REC SPEED AUDIO
3
1
1
Pendant la lecture, appuyer
.@/:
1
ABC
2
DEF
3
Appuyer sur la touche
POWER sur la télécommande
ou sur le panneau avant de
l’appareil.
CH
sur la touche PAUSE F.
L’appareil passera en pause et le
son sera assourdi.
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
SPACE
0
DISPLAY
VCR
DVD
PAUSE
Pour lire une cassette, allumer le
téléviseur et bien sélectionner
l’entrée à laquelle l’appareil est
raccordé.
3
5
4
PLAY
2
4
Appuyer sur la touche
STOP
PLAY B pour reprendre la
lecture.
REC/OTR
SETUP
TIMER PROG.
VCR
Appuyer sur :
ENTER
REC MONITOR
5
2
Remarques
Insérer une cassette
Appuyer sur la touche STOP
pour arrêter la lecture.
C
• Quand une cassette sans
ergot d’enregistrement est
insérée, l’appareil démarre
automatiquement la lecture.
préenregistrée, puis appuyer
sur la touche PLAY B pour
démarrer la lecture.
6
•
L’alignement sera automatiquement
ajusté à la lecture. Pour ajuster
Appuyer sur la touche
STOP/EJECT
panneau avant de l’appareil
pour éjecter la cassette.
C
A sur le
manuellement l’alignement, appuyer
sur les touches CHANNEL
sur le panneau avant de l’appareil
K/L
ou sur les touches CH
la télécommande.
K/CH
L
de
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Français
Enregistrement avec magnétoscope
Enregistrement
VCR
D’abord:
CH
GHI
4
JKL
5
MNO
6
VCR
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
Avant l’enregistrement, vérifier que :
• La chaîne souhaitée est
sélectionnée en appuyant sur les
touches numériques de la
SPACE
0
1
DISPLAY
VCR
DVD
PAUSE
Appuyer sur la touche
REC/OTR pour démarrer
l’enregistrement.
1
2
PLAY
télécommande ou sur les touches
STOP
Pour temporairement arrêter l’enre-
gistrement ou le reprendre, appuyer
CHANNEL K/L sur le panneau
REC/OTR
SETUP
TIMER PROG.
avant de l’appareil
.
1
ENTER
REC MONITOR
• Il y a une cassette avec ergot
d’enregistrement dans l’appareil.
• La vitesse d’enregistrement
souhaitée (SP – lecture standard
ou SLP – lecture super longue)
peut être sélectionnée en
sur la touche PAUSE
F. Après être
resté en mode de pause 5 minutes,
l’appareil s’arrête automatiquement
pour protéger la cassette et la tête
vidéo contre les dommages.
Remarques
•
Pour visionner une chaîne pendant
l’enregistrement d’une autre
1) Pendant l’enregistrement sur
cet appareil, appuyer sur la
toucheVIDEO/TV.
2) Sur la boîte de câblovision ou
la boîte satellite, sélectionner la
chaîne à visualiser.
Si cet appareil est raccordé à une
boîte de câblovision ou une boîte
satellite, se reporter à la section
“Connection to a cable box or
satellite box” à la page 14.
appuyant sur la touche REC
SPEED sur la télécommande.
Vitesse d’enregistrement :
2
Appuyer sur la touche STOP quand
l’enregistrement est terminé.
Vitesse
de la bande
Durée de
l’enregistrement/lecture
Tipe de cassette
Mode SP
T60
T120
2 heures 2-2/3 heures
6 heures 8 heures
T160
Prévention de l’effacement accidentel
Pour prévenir l’enregistrement acciden-
tel sur une cassette enregistrée, briser
son ergot d’enregistrement. Pour réen-
registrer dessus par la suite, couvrir le
1 heure
3 heures
Mode SLP
•
Stéréo ou SAP est sélectionné :
trou de ruban adhésif.
Ergot d'enregistrement
Enregistrement avec minuterie par simple pression
(OTR)
VCR
Quand l’enregistrement avec
Cette fonction permet de régler la
minuterie par simple pression est
OPEN/CLOSE
POWER
REC SPEED AUDIO
longueur d’enregistrement en
terminé, l’appareil se met
.@/:
1
ABC
2
DEF
3
appuyant sur la touche REC/OTR
automatiquement hors tension.
CH
GHI
4
JKL
5
MNO
6
de la télécommande ou sur le
PQRS
7
TUV
8
WXYZ
9
VIDEO/TV
SLOW
panneau avant de l’appareil.
Pour annuler l’enregistrement avec
SPACE
0
VCR
D’abord :
minuterie par simple pression
pendant le temps spécifié, appuyer
sur la touche STOP C.
DISPLAY
VCR
DVD
PAUSE
PLAY
1
STOP
1
Pendant l’enregistrement normal,
appuyez sur la touche REC/OTR
pour commencer l’enregistrement
avec minuterie par simple pression.
Pour sélectionner un temps
d’enregsitrement fixe, appuyez
plusieurs fois sur la touche
REC/OTR.
Remarques
REC/OTR
SETUP
TIMER PROG.
• La durée restante pour l’enre-
gistrement apparaît sur l’affichage
de panneau avant pendant l’enre-
gistrement par l’OTR.
1
ENTER
SKIP
REC MONITOR
MENU/LIST TOP MENU
RETURN
SKIP
CLEAR/C-RESET ZOOM
SEARCH
•
Une pause n’est pas possible pour
l’enregistrement par l’OTR.
CM SKIP
MODE
•
Si un enregistrement par l’OTR est
términé dans le magnétscope tan-
dis que le DVD est en mode de
lecture ou d’enregistrement, le
magnétoscope entrera en mode
d’arrêt et le DVD restera dans le
mode actuel.
(0:30)
(1:00)
(Enregistrement
normal)
(8:00)
(7:30)
107
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNAI CORPORATION
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of
original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original
retail purchase.
LABOR:
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SER-
VICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was
attempted by AUTHORIZED SERVICE FACILITY. This FUNAI CORPORATION Limited warranty does not apply to any the
product not purchased and used in CANADA.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover
damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP.,
or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper main-
tenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or
other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL),
ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILI-
TY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE
WARRANTY OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY
FUNAI AND ITS REPRESENTATIVES IN CANADA.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AUTHORIZED SERVICE FACILITY.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AUTHORIZED SERVICE FACILITY.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE
CHARGED.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-
OUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE FACILITY or general service procedure, please contact to us:
FUNAI CORPORATION
Customer Service
100 North Street; Teterboro, NJ 07608 , USA
Tel: 1-800-605-8453
http://www.funai-corp.com
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
1VMN20316 / E9501CD ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
|