Sylvania TV DVD Combo 6520FDG User Manual

20 inch COLOR TV/DVD  
Owner’s Manual  
6520FDG  
FEATURES  
• Auto Channel Programming  
• Screen Saver  
• Auto Power Off  
• Parental Lock  
• Resume Play  
• Closed Caption Decoder  
• Virtual Surround  
SUPPLIED ACCESSORIES  
This unit comes with the following accessories. Please confirm that  
all the accessories are included.  
Owner's Manual  
P Remote Control  
P AA batteries x 2  
P Owner’s Manual  
(NF100UD)  
(1EMN21313)  
INSTRUCCIONES EN ESPAÑOL INCLUDAS  
PLEASE READ BEFORE USING THIS EQUIPMENT  
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING  
AFTER READING OWNER’S MANUAL,  
PLEASE CALL TOLL FREE 1-800-968-3429 OR VISIT OUR WEB SITE AT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Lightning - For added protection for this unit receiver during  
a lightning storm, or when it is left unattended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent  
damage to the unit due to lightning and power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other elec-  
tric light or power circuits, or where it can fall into such power  
lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such  
power lines or circuits as contact with them might be fatal.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this unit through openings as they may touch dangerous  
voltage points or short out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the unit.  
18. Servicing - Do not attempt to service this unit yourself as  
opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified ser-  
vice personnel.  
a. When the power-supply cord or plug is damaged or frayed.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operat-  
ing instructions. Adjust only those controls that are covered  
by the operating instructions, as improper adjustment of  
other controls may result in damage and will often require  
extensive work by a qualified technician to restore the unit to  
its normal operation.  
e. If the unit has been dropped or damaged in any way.  
f. When the unit exhibits a distinct change in performance, this  
indicates a need for service.  
20. Replacement Parts - When replacement parts are required,  
be sure the service technician has used replacement parts  
specified by the manufacturer that have the same character-  
istics as the original part. Unauthorized substitutions may  
result in fire, electric shock, injury to persons or other haz-  
ards.  
21. Safety Check - Upon completion of any service or repairs to  
this unit, ask the service technician to perform routine safety  
checks to determine that the unit is in proper operating con-  
dition.  
22. Heat - This unit product should be situated away from heat  
sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
19. Damage Requiring Service - Unplug this unit from the wall  
outlet and refer servicing to qualified service personnel  
under the following conditions:  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.  
This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-  
tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is  
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse  
engineering or disassembly is prohibited.  
RADIO-TV INTERFERENCE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-  
ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,  
if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-  
nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-  
ment does cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
1) Reorient or relocate the receiving antenna.  
2) Increase the separation between the equipment and receiver.  
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
4) Consult the dealer or an experienced radio/TV technician for help.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to  
this equipment may cause harmful interference unless the modifications are expressly approved in the  
owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or  
modification is made.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
LASER SAFETY  
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service  
this device, due to possible eye injury.  
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.  
DO NOT STARE INTO BEAM.  
LOCATION: INSIDE, NEAR THE DECK MECHANISM.  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY  
INSERT.  
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE  
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER  
JUSQU'AU FOND.  
Note to CATV system installer:  
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-  
lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system  
of the building as close to the point of cable entry as practical.  
LOCATION  
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place  
for its installation:  
• Shield it from direct sunlight and keep it away from sources of intense heat.  
• Avoid dusty or humid places.  
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the  
top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.  
• Install unit in a horizontal position.  
• Avoid locations subject to strong vibration.  
• Do not place the unit near strong magnetic fields.  
• Avoid moving unit to locations where temperature differences are extreme.  
• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.  
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.  
• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our  
Authorized Service Center for servicing.  
• Do not put your fingers or objects into the unit disc loading tray.  
• Do not place anything directly on top of the unit.  
MOISTURE WARNING  
• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or  
after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist  
unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the  
unit on and leave it at least 2 hours to dry out.  
NOTE ABOUT RECYCLING  
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-  
tions concerning chemical wastes.  
Manufactured under license from Dolby Laboratories.  
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.  
The serial number of this product may be found on the back of the unit. No other unit has the same serial  
number as yours. You should record the number and other vital information here and retain this book as a  
permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ABLE OF CONTENTS  
T
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2  
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2  
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5  
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5  
PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6  
ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6  
CONNECTING TO AN EXTERNAL DEVICE (FRONT) . .6  
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR) .7  
INSTALLING THE BATTERIES IN REMOTE CONTROL .7  
OPERATING CONTROLS AND FUNCTIONS . . .8  
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .15  
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15  
DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .15  
SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .16  
FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .16  
AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .17  
ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .18  
V.S.S (Virtual Surround System) . . . . . . . . . . . . . .18  
SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .18  
REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .19  
PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .20  
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .20  
ON-SCREEN INFORMATION . . . . . . . . . . . . . .20  
CHANGING THE DVD SET UP ITEMS . . . . . . .21  
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .21  
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .24  
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .26  
APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .27  
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .27  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .28  
TV SECTION  
TV OPERATION AND SETTINGS . . . . . . . . . . . .9  
INITIAL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9  
SLEEP TIMER / PICTURE CONTROL . . . . . . . . . .10  
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .10  
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .11  
ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11  
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12  
DVD SECTION  
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .14  
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .14  
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .14  
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .29  
WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER  
SYMBOLS USED IN THIS MANUAL  
The following symbols below appear in some headings and notes in this manual, with the following meanings.  
Description refers to TV operation  
(in the TV mode).  
Description refers to playback of  
audio CDs (in the DVD mode).  
TV  
TV  
Description refers to playback of  
DVD video discs (in the DVD mode).  
Description refers to the items  
to be set by the QUICK mode  
(in the DVD mode).  
QUICK  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
REPARATION FOR USE  
P
ANTENNA/CABLE CONNECTIONS  
Plug the incoming cable into the ANT. jack on the rear of the unit.  
If your cable service supplies you with a converter box or if you use a satellite system, connect the box with  
this unit as shown below.  
Cable  
TV signal  
Antenna  
or  
Rear of the unit  
ANT.  
COAXIAL  
Incoming cable from home  
Antenna / Cable Company  
(No Cable Box)  
ANT.  
Cable Box or Satellite Box*  
*NOTE  
OUT  
OR  
IN  
(DO NOT DISCONNECT FROM BOX)  
Some cable TV systems use scrambled  
signals and require a special converter to  
receive these channels. Consult your local  
cable company.  
Incoming cable from Cable Company  
or Satellite Antenna  
NOTE:  
Bent pin  
For your safety and to  
avoid damages to the unit,  
unplug the antenna cable  
from the ANT. jack before  
moving the unit.  
Before plugging the antenna into  
the ANT. jack of the unit, check  
that the pin is not bent. If it is bent,  
straighten the pin as illustrated,  
then plug the pin into the ANT. jack  
of the unit.  
Cable  
Plug  
(Needs to be  
straightened)  
(Straight pin)  
CONNECTING TO AN EXTERNAL DEVICE (FRONT)  
When you watch a program recorded on another source (VCR or video camera), use the  
AUDIO/VIDEO input jacks on the front of the unit.  
AUX  
Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO  
jacks of this unit.  
Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.  
POWER  
OPEN / CLOSE  
VIDEO  
L
-
AUDIO  
-
R
HEADPHONE  
VOLUME  
CH.  
SELECT  
STOP  
PLAY  
ex.  
VCR or video camera, etc.  
To the Audio output jacks  
[Front of the unit]  
Audio Cable  
(commercially available)  
OPEN / CLOSE  
(OUT)  
(OUT)  
(IN)  
HEADPHONE  
VIDEO  
L
-
AUDIO  
-
R
(IN)  
To the Video output jack  
Video Cable  
(commercially available)  
NOTE:  
When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR  
(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)  
You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier  
equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-  
channel surround format in this unit, connect to a Dolby Digital decoder.  
Use an audio coaxial digital cable (commercially available) for the audio connections.  
ANT.  
COAXIAL  
(OUT)  
COAXIAL  
To COAXIAL jack  
(DVD AUDIO OUT only)  
Dolby Digital  
decoder  
or  
To Coaxial digital  
Audio input jack  
(IN)  
Audio coaxial  
digital cable  
(commercially  
available)  
ex.  
MD deck,  
DAT deck, etc.  
To Coaxial digital  
Audio input jack  
(IN)  
NOTES:  
• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an  
MD or DAT deck.  
• Be sure to turn off the power to all devices in the system before connecting another device.  
• Refer to the Owner's Manuals for the devices to be connected to the unit.  
To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-  
nect to a Dolby Digital decoder, set to "BITSTREAM". (Refer to "AUDIO SETTING" on page 22.) Playing a unit using  
incorrect settings may generate noise distortion and may also damage the speakers.  
INSTALLING THE BATTERIES IN REMOTE CONTROL  
1) Open the battery compartment cover by pressing  
[BATTERY PRECAUTIONS]  
the cover on the remote unit in the direction of  
the arrow.  
2) Insert 2 “AA” penlight batteries into the battery  
compartment in the direction indicated by the  
polarity (+/-) markings.  
Be sure to follow the correct polarity as indicat-  
ed in the battery compartment. Reversed batter-  
ies may cause damage to the device.  
Do not mix different types of batteries together  
(e.g. Alkaline and Carbon-Zinc) or old batteries  
with fresh ones.  
3) Replace the cover.  
If the device is not to be used for a long period  
of time, remove the batteries to prevent damage  
or injury from possible battery leakage.  
1
2
3
Do not try to recharge batteries not intended to  
be recharged; they can overheat and rupture.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PERATING CONTROLS AND FUNCTIONS  
O
- FRONT PANEL -  
POWER  
OPEN / CLOSE  
VIDEO  
L
-
AUDIO  
-
R
HEADPHONE  
VOLUME  
CH.  
STOP  
PLAY  
SELECT  
1
2
3
4 5 6 7  
8 9 10 11  
- REMOTE CONTROL -  
[REMOTE CONTROL]  
12 POWER Button [TV P.9 / DVD P.15]  
13 PICTURE/SLEEP Button [TV P.10]  
14 Number Buttons [TV P.9 / DVD P.18]  
15 DISPLAY Button [DVD P.20]  
16 SKIP H / G Buttons [DVD P.18]  
17 PLAY B Button [TV P.9 / DVD P.15]  
18 PAUSE F Button [DVD P.15]  
19 TITLE Button [DVD P.15]  
20 CLEAR Button [TV P.10 / DVD P.18]  
21 MODE Button [DVD P.16]  
22 OPEN/CLOSE A Button [DVD P.15]  
23 SELECT Button [TV P.9]  
OPEN/  
CLOSE  
POWER  
PICTURE/  
SLEEP  
SELECT  
22  
23  
12  
13  
1
4
3
6
9
2
5
8
0
14  
CH.  
24  
7
VOL.  
DISPLAY  
+100  
25  
26  
27  
28  
+10  
15  
SKIP  
SET-UP  
MUTE  
16  
17  
PLAY  
FWD  
REV  
K
L
24 CH.  
/
Buttons [TV P.9]  
Buttons [TV P.9]  
STOP  
29  
X
Y
25 VOL.  
/
SLOW  
PAUSE  
CLEAR  
MODE  
TITLE  
DISC MENU  
26 MUTE Button [TV P.9]  
18  
19  
20  
30  
31  
32  
ENTER  
27 SET-UP Button [TV P.10 / DVD P.21]  
28 REV E Button [DVD P.15]  
FWD D Button [DVD P.15]  
RETURN  
33  
21  
29 STOP C Button [DVD P.15]  
30 DISC MENU Button [DVD P.15]  
31 ENTER Button [TV P.10 / DVD P.17]  
K
L
32  
/
/{ / B Buttons [TV P.10 / DVD P.15]  
[FRONT PANEL]  
33 RETURN Button [DVD P.17]  
01 POWER Button [TV P.9 / DVD P.15]  
02 Disc loading tray  
NOTES:  
X
Y
03 VOLUME  
/
Buttons [P.9]  
• We do not recommend the use of universal remote con-  
trols as it does not control all the functions. Note that  
the code number given by universal remote controls  
may not program to this unit. For more details, contact  
the manufacturer of the universal remote control.  
K
04 CHANNEL SELECT Button [TV P.9]  
05 STOP C Button [DVD P.15]  
06 PLAY B Button [TV P.9 / DVD P.15]  
07 Remote sensor window  
• Unless stated, all operations described are based on  
remote control use. Some operations can be carried  
out using the menu bar on the TV screen.  
08 OPEN/CLOSE A Button [DVD P.15]  
09 VIDEO input Jack [P.6]  
10 AUDIO L/R input Jacks [P.6]  
11 HEADPHONE Jack  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
TV SECTION  
V OPERATION AND SETTINGS  
T
INITIAL SET UP  
WATCHING A TV PROGRAM  
TV  
TV  
When you turn on the power for the first time, 
TV  
TV  
1 Press [POWER] to turn on the unit.  
the INITIAL LANGUAGE screen is displayed.  
Select the language for screen display and perform  
auto programming of the channels.  
NOTES:  
-
HELPFUL HINTS  
-
1.PLEASE CHECK TO SEE IF  
THE ANTENNA/CABLE/  
SATELLITE IS  
PROPERLY CONNECTED.  
2.DID YOU PERFORM  
If the TV screen shows snow  
noise and there is no operation  
for more than 10 seconds,  
“AUTO CH PROGRAMMING”?  
3.PLEASE REFER TO FRONT  
PAGE OF THE OWNER’S  
MANUAL OR REAR PANEL  
FOR SUPPORT LINE  
1 After antenna or cable connection is  
completed, connect the power cord into  
a standard AC outlet.  
“HELPFUL HINTS” appears.  
INFORMATION.  
• Make sure if the antenna or cable is connected  
properly. (Refer to “ANTENNA/CABLE CONNEC-  
TIONS on page 6.)  
2 Press [POWER] to turn on the unit.  
• Set the“AUTO CH PROGRAMMING” in the  
CHANNEL SET UP. (Refer to “CHANNEL SET UP”  
on page 11.)  
• If those setting do not work properly, please  
call our help line on the front page of this owner’s  
manual.  
3 Press one of the keys listed  
SELECT LANGUAGE  
below to select the language  
ENGLISH  
Y
NEXT:PRESS VOL  
H
H
H
of on-screen menu.  
• ENGLISH: [VOL.  
• ESPAÑOL: [VOL.  
ESPAÑOL  
DESPUÉS:PRESIONE VOL  
FRANÇAIS  
APRÈS:PRESSEZ CH.  
X
K
Y
X
]
]
K
L
] or the Number buttons to  
2 Use [CH.  
/
]
select your desired channel number.  
K
• FRANÇIAS: [CH.  
To use the number buttons  
•Single digit channels: (Ex. 02, 03, 04 and so on)  
Press [0] first to select a single digit channel.  
4 Confirm the antenna (or cable)  
– INITIAL SETUP –  
connection and press [PLAY B].  
PLEASE CONNECT ANTENNA  
OR CABLE OR SATELLITE  
TO THIS UNIT.  
THEN PRESS PLAY,  
IN ORDER TO PERFORM  
“AUTO CH PROGRAMMING”  
Two digit channels: (Ex. 12, 38, 95 ...)  
Press two digits directly.  
• The tuner scans and memori-  
zes all active channels in  
your area.  
Tree digit channels: (Ex. 115, 125 ...)  
Press [+100] first, then press the last two digits.  
5 When the scanning is comple-  
ted, the tuner stops on the  
lowest memorized channel.  
CH 15  
X
Y
] to adjust the volume.  
3 Use [VOL.  
/
(Example)  
Press [MUTE] to instantly  
mute the sound. Press it again  
to restore the previous sound  
level.  
VOLUME 20  
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
NOTES:  
You can exit the INITIAL SETUP menu by pressing  
[SET-UP]. If the button is pressed during channel  
scanning, the tuner stops scanning and the lowest  
memorized channel is displayed.  
NOTE:  
• Even if you turn off the unit in the DVD mode, the unit  
will be in the TV mode when you turn it on again.  
The INITIAL SETUP menu is displayed every time  
you turn on the unit unless the scanning is com-  
pleted.  
TO WATCH CABLE OR SATELLITE CHANNEL  
• In case no channel can be  
received by the channel scanning,  
"NO TV SIGNALS" is displayed on  
the screen. Turn off the unit and  
check the antenna connection,  
then follow steps 1 to 5 again.  
If the unit is connected to a cable box or satellite  
box, use [CH. K / L] to select CH3 or CH4 accord-  
ing to the output channel setting of the device and  
select desired channel on that device.  
NO TV SIGNALS  
TO WATCH EXTERNAL INPUT  
You can change the setting after completing INI-  
TIAL SET UP by LANGUAGE menu or CHANNEL  
SET UP menu. (Refer to "ON-SCREEN MENU LAN-  
GUAGE" or "CHANNEL SET UP" on page 11).  
When an external equipment is  
connected to the front AUDIO/  
AUX  
VIDEO input jacks, press  
[SELECT] or [CH. K / L] repeat-  
edly until "AUX" appears on the  
screen.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
TV SECTION  
TV OPERATION AND SETTINGS  
SLEEP TIMER / PICTURE CONTROL  
CLOSED CAPTION SYSTEM  
You can set Sleep Timer and picture  
adjustment with [PICTURE / SLEEP].  
TV  
TV  
TV  
TV  
You can view specially labeled (cc) TV pro-  
grams, movies, news and pre-recorded tapes with  
either a dialogue caption or text display.  
• The menu changes as described below every time  
you press [PICTURE / SLEEP].  
1 Press [SET-UP].  
- TV SETUP -  
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE [ENGLISH]  
CAPTION [OFF]  
Sleep Timer  
BRIGHT  
CONTRAST  
COLOR  
Use [K / L] to point to  
"CAPTION".  
B
SHARPNESS  
TINT  
- TV SETUP -  
2 Press [ENTER] repeatedly to  
select your desired caption  
mode.  
SLEEP TIMER SETTING  
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE [ENGLISH]  
CAPTION [CAPTION1]  
The Sleep Timer function is used to turn off the  
unit without pressing [POWER] after a desired time.  
B
CAPTION mode: You can watch dramas, movies and  
news while captioning the dialogues and the contents  
of news.  
1 Press [PICTURE / SLEEP] to  
SLEEP 0 MINUTE  
C
C
C
C
C
C
C
C
C
C
C
C
display the Sleep Timer menu.  
TEXT mode: You can watch half screen text informa-  
2 Within 10 seconds, set your desired sleep time  
tion if you want.  
using [s / B].  
*"CAPTION2" is usually used for a second language (if  
available).  
[B]...Increase by 10 min. (Up to 120 min.)  
[s]...Decrease by 10 min.  
3 Press [SET-UP] to exit the menu.  
NOTE:  
NOTES:  
To cancel the Sleep Timer, use [CLEAR] or [s / B]  
• Even if any power failure, the unit will retain its mem-  
ory for this feature.  
to set the time to "0".  
• Some programs are not broadcasted with closed  
captions. The unit is designed to provide error-free  
closed captions with high quality antenna, cable and  
VCR signals. Conversely, poor quality signals are  
likely to result in caption errors or no captions at all.  
3 To confirm the remainder time to shutdown,  
press [PICTURE / SLEEP].  
PICTURE CONTROL  
• Common signal conditions which may cause caption  
errors are listed below:  
The picture controls are preset to factory defaults,  
but you can change them to your desired setting.  
- Weak snowy reception on TV screen  
- Multiplex signal reception displaying picture  
ghosts or airplane flutter  
1 Press [PICTURE / SLEEP]  
BRIGHT  
P
P
P
P
P
P
P
C
P
P
P
P
P
P
P +  
repeatedly until desired control  
is displayed.  
• If the unit displays a black box  
on the TV screen, this means  
that the unit is set to the TEXT  
mode. To clear screen, select  
"CAPTION1", "CAPTION2" or  
"OFF".  
2 Use [s / B] to adjust to your desired level within  
5 seconds.  
BRIGHT  
to decrease brightness to increase brightness  
TO CANCEL THE CLOSED CAPTION SYSTEM  
CONTRAST to decrease contrast to increase contrast  
COLOR  
TINT  
SHARPNESS to soft  
to pale  
to brilliant  
to green  
to clear  
1 Press [SET-UP]. Use [K / L] to point to  
to purple  
"CAPTION".  
2 Press [ENTER] repeatedly to select "OFF".  
• Even if any power failure occurs, the unit will  
retain its memory for this feature.  
3 Press [SET-UP] to exit the menu.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
CHANNEL SET UP  
• Refer to page 9 on how to use the Number but-  
tons.  
Channel presetting is necessary at the start or 
TV  
TV  
in case you moved the TV to a different area.  
4 Press [ENTER] repeatedly. The channel number  
changes to red (deleted) or blue (added) every  
time you press the button.  
AUTO CHANNEL PROGRAMMING  
1 Press [SET-UP].  
- TV SETUP -  
To delete or add another channel, repeat steps 3  
to 4.  
B
CHANNEL SET UP  
V-CHIP SET UP  
Use [K / L] to point to  
LANGUAGE [ENGLISH]  
CAPTION [OFF]  
"CHANNEL SET UP", then  
press [ENTER].  
5 Press [SET-UP] to exit the menu.  
NOTE:  
2 Use [K / L] to point to "AUTO  
CH PROGRAMMING", then  
press [ENTER].  
– CHANNEL SET UP –  
To confirm that channel(s) has (have) been deleted  
or added, select it (them) using [CH. K / L].  
ADD/DELETE CH (CATV)  
AUTO CH PROGRAMMING  
B
The tuner scans and memorizes
channels in your area.  
ON-SCREEN MENU LANGUAGE  
3 When the scanning is comple-  
CH 15  
TV  
TV  
You can select the language of on-screen  
menu among English, Spanish and French.  
ted, the lowest memorized  
channel is displayed.  
(Example)  
If "NO TV SIGNALS" appears  
on the TV screen, check the  
antenna connection and try  
again.  
1 Press [SET-UP].  
- TV SETUP -  
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE [ENGLISH]  
CAPTION [OFF]  
Use [K / L] to point to  
NO TV SIGNALS  
B
"LANGUAGE".  
NOTES:  
• The unit may recognize CATV channels to be TV  
channels if reception condition is poor. In this case,  
check the antenna connection and try "AUTO CH  
PROGRAMMING" again.  
2 Press [ENTER] repeatedly to select "ENGLISH",  
"ESPAÑOL" or "FRANÇAIS".  
3 Press [SET-UP] to exit the menu.  
Auto channel programming is NOT necessary  
when connected to a cable box or satellite box.  
Just select the channel for cable box or satellite  
input (ex. CH3 or CH4) on the unit, then select  
your desired channel on the cable box or satellite  
box.  
NOTES:  
• This function effects only the language on the screen  
menu and not the audio source.  
• If for some reason the menu is already in Spanish or  
French, press [SET-UP], using [K / L] point to  
"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",  
then press [ENTER] repeatedly to select desired lan-  
guage, then press [SET-UP].  
ADDING/DELETING CHANNELS  
You can add channels that was not memorized due  
to the bad reception status and also delete chan-  
nels you no longer receive or seldom watch.  
- TV SETUP -  
1 Press [SET-UP].  
B
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE [ENGLISH]  
CAPTION [OFF]  
Use [  
K / L] to point to  
"CHANNEL SET UP", then  
press [ENTER].  
– CHANNEL SET UP –  
2 Use [K / L] to point to  
"ADD/DELETE CH", then  
press [ENTER].  
B
ADD/DELETE CH (CATV)  
AUTO CH PROGRAMMING  
3 Use the Number buttons or  
[CH. K / L] to select your  
desired channel number.  
(You can also use [K / L] to  
enter it.)  
08  
ADD / DELETE  
(Example: CH8)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
TV SECTION  
TV OPERATION AND SETTINGS  
A
TV RATING SET UP  
V-CHIP SET UP  
4 Use [K / L] to select a rating  
TV  
TV  
This feature enables parents to prevent their  
children from watching inappropriate material on  
TV. When you try to access a blocked program,  
“PROTECTED PROGRAM by ...message appears  
on the TV screen.  
B
TV–Y  
TV–Y7  
TV–G  
TV–PG (  
TV–14  
TV–MA(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
that you wish to block.  
(
)
)
)
)
Press [ENTER] repeatedly to  
set it to "BLOCK" or "VIEW".  
(
Selection Rating Category Explanations  
TV-Y  
NOTE:  
Appropriate for all children  
Appropriate for children seven and older  
General Audience  
Parental Guidance suggested  
Unsuitable for children under 14  
Mature audience only  
To change the rating, the TV  
must be turned to an unprotect-  
ed program. If the screen on the  
right is displayed, change the  
channel to a station that is not  
protected.  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
PROTECTED PROGRAM  
by TV-Y  
1 Press [SET-UP].  
NOTES:  
- TV SETUP -  
• When you select a rating and set  
it to "BLOCK", the higher ratings  
will be blocked automatically.  
The lower ratings will be avail-  
able for viewing.  
Use [K / L] to select  
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE [ENGLISH]  
CAPTION [OFF]  
B
TV–Y  
TV–Y7  
TV–G  
TV–PG (DLSV)  
TV–14 (DLSV)  
TV–MA ( LSV)  
[VIEW]  
"V-CHIP SET UP", then press  
[ENTER].  
(
)
[VIEW]  
B
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
2 Use the Number buttons to  
ACCESS CODE  
• When you set the lowest rating to  
"VIEW", all other ratings will be automatically avail-  
able for viewing.  
enter the access code.  
_
_
_
_
• For the first time set-up or in  
the event the unit has lost  
power, enter the default code of 0000.  
5 The TV-Y7, TV-PG, TV-14 and  
TV-MA ratings have the option  
TV–Y  
TV–Y7  
TV–G  
TV–PG (  
TV–14  
TV–MA(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
3 Use [K / L] to select an item,  
B
(
)
– V-CHIP SET UP –  
of sub rating categories.  
Use [  
K / L] to select a rating  
with sub-ratings, then press  
)
)
)
then press [ENTER].  
Refer to the pages below to  
set up each item.  
(
B TV RATING  
MPAA RATING  
CHANGE CODE  
[ENTER] twice.  
• TV RATING :  
• MPAA RATING :  
• CHANGE CODE:  
P12 A  
P13 B  
P13  
6 Use [K / L] to select a sub-  
rating, then press [ENTER] to  
set it to "BLOCK" or "VIEW".  
TV–PG  
[BLOCK]  
C
B
D
L
S
V
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
NOTE:  
• The blocked sub-ratings will  
appear next to the rating cate-  
gory in the "TV RATING" menu.  
TV–Y  
TV–Y7  
TV–G  
TV–PG (DLSV)  
TV–14 (DLSV)  
TV–MA ( LSV)  
[VIEW]  
(
)
[VIEW]  
[VIEW]  
B
[BLOCK]  
[BLOCK]  
[BLOCK]  
Selection Rating Category Explanations  
TV-Y7  
FV  
Fantasy Violence  
TV-PG, TV-14, TV-MA  
D
L
Suggestive Dialog (TV-PG, TV-14 only)  
Coarse Language  
S
V
Sexual Situation  
Violence  
7 Press [SET-UP] to exit the menu.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
B
MPAA RATING SET UP  
4 Use [K / L] to point to your  
desired item, then press  
[ENTER] to select "BLOCK"  
or "VIEW".  
G
[VIEW]  
PG  
[VIEW]  
PG–13  
R
NC–17  
X
[VIEW]  
B
[BLOCK]  
[BLOCK]  
[BLOCK]  
Selection Rating Category Explanations  
G
General Audience  
PG  
PG-13  
R
Parental Guidance suggested.  
Unsuitable for children under 13  
Restricted; under 17 requires acco-  
mpanying parent or adult guardian  
No one under 17 admitted  
NC-17  
X
Mature audience only  
5 Press [SET-UP] to exit the menu.  
C
CHANGE ACCESS CODE  
4 Use the Number buttons to  
enter your desired access  
code in the "NEW CODE",  
then enter the same code in  
the "CONFIRM CODE". When  
completed, the menu will  
NEW CODE  
X X X X  
CONFIRM CODE  
_
_
_
_
return to "V-CHIP SET UP".  
5 Press [SET-UP] to exit the menu.  
NOTE:  
Your personal access code will be erased and will  
return to the default (0000) when a power failure  
occurs or when you turn off the power using a wall  
switch. If you forget the code, unplug the power cord  
for 10 seconds to restore the access code to 0000.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DVD SECTION  
BOUT THE DISCS  
A
PLAYABLE DISCS  
Playable  
discs  
Region Recorded Disc  
Mark (logo)  
Disc types  
code  
signals size  
DVD-Video  
*1,2,4,6,10,11  
or  
Digital  
12 cm  
Example  
DVD-RW  
DVD-R  
Title 1  
Title 2  
video  
or  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1  
Chapter 2  
-
-
(MPEG2)  
8 cm  
*1,3,4,5,6,  
7,9,10  
DVD+RW  
DVD+R  
*1,3,4,5,6,8,9,10  
Audio CD  
*4,6,10  
Example  
12 cm  
or  
8 cm  
Digital  
audio  
-
CD-RW  
CD-R  
Track 1  
Track 2  
Track 5  
Track 6  
Track 3  
Track 4  
*4,5,6,9,10  
is a trademark of DVD Format/Logo Licensing Corporation.  
If you cannot play back a disc which bears one of the marks above, check the following notes.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot  
be played back.  
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.  
*3: Discs recorded in the VR (Video Recording) format cannot be played back.  
*4: Scratched or stained discs may not be played back.  
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the  
recorder or special properties of discs.  
*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may  
not play them back. Even if they are played back, the sound or video quality will be compromised.  
*7:You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD  
recorder. However, depending on the recording status of a disc, the disc may not be played back at all  
or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc  
with the DVD recorder. Refer to the manual accompanying the DVD recorder.  
*8: Only the discs recorded in the video format and finalized can be played back.  
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not  
be played back at all or normally (the picture or sound may not be smooth, etc.).  
*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may  
not play back properly.  
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read  
it correctly.  
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region  
format can only be played back on unit with the same region code.  
UNPLAYABLE DISCS  
NEVER play back the following discs. Otherwise, malfunction may result!  
DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /  
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3  
The sound MAY NOT be heard: Super Audio CD  
NOTE:  
Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio  
CD layer cannot be delivered.  
Any other discs without compatibility indications  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
LAYING A DISC  
P
FAST FORWARD / FAST REVERSE  
BASIC PLAYBACK  
• During playback, press  
[FWD D] for fast forward or  
[REV E] for fast reverse.  
1 Press [POWER] to turn on the  
unit.  
• Every time you press the button,  
playback speeds up and the level  
of the speed appears on the  
screen.  
D1  
2 Press [OPEN/CLOSE A].  
3 Place the disc in the tray, with  
the label facing up.  
NOTES:  
• For DVDs, fast forward/reverse speed is different  
depending on the disc. Approximate speed is 1 (×2),  
2 (×8), 3 (×20), 4 (×50) and 5 (×100).  
4 Press [PLAY B].  
• The tray will close automatically and playback will  
start. When you play back a DVD which features a  
title menu, it may appear on the screen.  
• For Audio CDs approximate speed is 1 (×2), 2 (×8)  
and 3 (×30).  
To return to normal playback, press [PLAY B].  
NOTES:  
• Closing the disc tray manually or by pressing  
[OPEN/CLOSE A] also starts playback.  
SLOW FORWARD / SLOW REVERSE  
• With DVDs that use titles for playback program signals,  
playback may start from the second title or it may skip  
these titles.  
• During playback, press [PAUSE F].  
• Press [FWD D] for slow forward or  
[REV E] for slow reverse.  
5 To freeze the picture, press [PAUSE F] during  
• Every time you press the button,  
1
playback.  
playback is slowed down and the  
level of the speed appears on the  
screen.  
NOTE:  
• The sound will be muted in pause mode.  
NOTE:  
6 Press [STOP C] to stop  
• Slow forward / reverse speed varies with the disc.  
Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).  
playback temporarily.  
Resume ON  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
• Press [PLAY B] to resume  
the playback.  
To return to normal playback, press [PLAY B].  
To cancel resume and stop the  
disc, [STOP C] again.  
DISC MENU / TITLE MENU  
DVD may contain menus to navigate the  
disc and access special features.  
NOTES:  
• The resume information stays on even if the unit is  
turned off.  
• A "prohibited icon" may appear  
at the top-right on the TV screen  
during operation. This means  
1 Press [DISC MENU] or [TITLE].  
• The DVD main menu / the title menu will appear.  
You can call up the menu even during playback.  
that the operation is not available on the disc.  
STEP BY STEP PLAYBACK  
K
L
2 Use [  
/
/
s / B] to select an item, and press  
[ENTER].  
• During playback, press [PAUSE F].  
You can advance the picture frame by  
frame by pressing [PAUSE F] repeatedly.  
NOTES:  
• If disc menu is available on the disc, audio language,  
subtitle options, chapters for the title and other  
options will appear for selection.  
To return to normal playback, press [PLAY B].  
• Contents of menu and corresponding menu opera-  
tions may vary between discs. Refer to the manual  
accompanying the disc for details.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DVD SECTION  
PECIAL PLAYBACK FUNCTIONS & SETTINGS  
S
FUNCTION TABLE  
Setting menu switches as below every time you press [MODE] during playback.  
See the reference page for how to set each menu. Some functions are not available in specific  
modes, but this is not a malfunction.  
DVD-V  
CD  
Press [MODE]  
Press [MODE]  
AUDIO STREAM 1  
...  
AUDIO STREAM 8  
STEREO  
L-ch  
R-ch  
AUDIO MENU (P.17)  
AUDIO MENU (P.17)  
V.S.S MENU (P.18)  
SEARCH MENU (P.18)  
REPEAT MENU (P.19)  
A-B REPEAT MENU (P.19)  
MENU OFF  
OFF  
OFF  
1
2
SUBTITLE MENU (P.17)  
SUBTITLE STREAM 1  
....  
SUBTITLE STREAM 32  
TRACK SEARCH  
TIME SEARCH  
MARKER SEARCH  
ANGLE 1  
....  
ANGLE 8  
ANGLE MENU (P.17)  
(If available)  
OFF  
TRACK  
ALL  
OFF  
ZOOM MENU (P.17)  
ZOOM 1 (×1.3)  
ZOOM 2 (×2.0)  
ZOOM 3 (×4.0)  
OFF  
A-  
A-B  
OFF  
ON  
BLACK LEVEL MENU (P.18)  
V.S.S MENU (P.18)  
OFF  
1
2
SEARCH MENU (P.18)  
CHAPTER SEARCH  
TITLE SEARCH  
TIME SEARCH  
MARKER SEARCH  
OFF  
CHAPTER  
TITLE  
REPEAT MENU (P.19)  
A-B REPEAT MENU (P.19)  
MENU OFF  
OFF  
A-  
A-B  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ANGLE MENU  
AUDIO MENU  
Some DVD discs contain scenes which  
have been shot from various angles and  
you can change them as you like.  
AUDIO LANGUAGE  
You can select audio language during DVD playback  
(if multi languages are available).  
1 During playback, press  
1 / 8 (ANGLE)  
[MODE] repeatedly until  
1.ENG Dolby D 3/2.1ch 48k/3  
1 Press [MODE] during playback.  
ANGLE menu appears.  
2 Use [K / L] to select your desired angle.  
K
L
] to select your desired language.  
2 Use [  
/
3 Press [RETURN] to exit the menu.  
NOTES:  
• This function may not work on some DVDs with mul-  
tiple audio languages. In this case, set it on the disc  
menu. (Operation varies depending on discs. Refer to  
the manual of the disc.)  
NOTE:  
• If multiple angle function is not available, this menu  
does not appear on the screen.  
• When "NOT AVAILABLE" appears  
(
)
NOT AVAILABLE AUDIO  
on the TV screen, it means this  
function is not available on the  
disc.  
ZOOM  
The Zoom function allows you to enlarge  
the video image and to pan through the  
enlarged image.  
3 Press [RETURN] to exit the menu.  
STEREO SOUND MODE  
1 During playback, press  
You can select sound output mode during CD  
playback.  
OFF (ZOOM)  
[MODE] repeatedly until  
ZOOM menu appears.  
STEREO (AUDIO)  
1 Press [MODE] during  
2 Press [ENTER] repeatedly to select the required  
playback.  
zoom factor.  
2 Use [K / L] to select the sound mode.  
• STEREO: stereo sound with left and right channels  
OFF  
ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)  
OFF (ZOOM)  
ZOOM1  
ZOOM2  
ZOOM3  
L-ch:  
R-ch:  
left channel sound only  
right channel sound only  
3 Press [RETURN] to exit the menu.  
3 Use [K / L / s / B] to move the zoomed picture  
across the screen.  
SUBTITLE LANGUAGE  
You can select a language for subtitles  
during DVD playback (if available).  
4 Press [RETURN] to exit.  
• The zoomed position guide  
appears on the right corner  
of the TV screen in the zoom mode.  
1 During playback, press  
[MODE] repeatedly until  
SUBTITLE menu appears.  
1.ENG/6 (SUBTITLE)  
NOTES:  
• Zooming function does not work while disc menu is shown.  
• Zooming function is not available on some discs.  
• It may take several seconds to slide the zoomed picture.  
• The picture may be distorted if you operate other  
functions (ex. pause, fast forward etc.) repeatedly in  
the zoom mode.  
2 Use [K / L] to select your desired subtitle lan-  
guage. To cancel subtitles, select "OFF".  
3 Press [RETURN] to exit the menu.  
To cancel the zoom mode, repeat steps 1-2 and  
press [ENTER] until "OFF" appears.  
NOTES:  
• This function may not work on some DVDs with mul-  
tiple subtitle languages. In this case, set it on the disc  
menu. (Operation varies depending on discs. Refer to  
the manual of the disc.)  
• If the selected language does not have 3-letter code,  
"---" will be displayed on the screen. (Refer to  
LANGUAGE CODE LIST on page 27.)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DVD SECTION  
SPECIAL PLAYBACK FUNCTIONS & SETTINGS  
BLACK LEVEL MENU  
SEARCH MENU  
You can adjust the Black Level to make the  
black parts of the picture brighter.  
You can begin playback at a specific track, title,  
chapter or from a specific point on a disc.  
1 During playback, press  
TRACK SEARCH  
OFF (BLACK LEVEL)  
[MODE] repeatedly until  
BLACK LEVEL menu  
appears.  
1 During playback, press [MODE]  
__/12 (SEARCH)  
repeatedly until SEARCH  
menu appears.  
K
L
] to select "ON" or "OFF".  
2 Use [  
/
2 Within 60 seconds, use the Number buttons to  
select the desired track number. Playback will  
start from the selected track.  
• ON: Makes the dark parts brighter.  
OFF: Shows the original picture as recorded.  
(Initial setting)  
NOTES:  
3 Press [RETURN] to exit the menu.  
• For single digit press [0] first, if the total track of the  
disc is 10 tracks or more.  
NOTE:  
You can also skip tracks by using [SKIP H / G],  
or entering the desired track number with  
the Number buttons.  
• The setting will be saved even if the unit is turned off.  
3 Press [RETURN] to exit the menu.  
V.S.S (Virtual Surround System)  
You can enjoy surround-sound effect  
over two speakers on this unit.  
CHAPTER SEARCH  
1 During playback, press  
__/21 (SEARCH)  
1 During playback, press  
OFF (V.S.S.)  
[MODE] repeatedly until  
[MODE] repeatedly until  
SEARCH menu appears.  
V.S.S menu appears.  
2 Use the Number buttons to enter the desired  
chapter number. Playback will start at the selected  
chapter.  
2 Use [K / L] to select the desired sound effect.  
• 1:  
2:  
Natural effect  
Emphasized effect  
• Press [CLEAR] to erase the incorrect input.  
OFF: No effect (Initial setting)  
• For single digit press [0] first, if the total number of  
chapters of the disc is 10 or more.  
3 Press [RETURN] to exit the menu.  
NOTES:  
3 Press [RETURN] to exit the menu.  
• When playing back 96kHz with Virtual Surround func-  
tion, the sound will be down sampled at 48kHz and  
output as digital audio.  
NOTE:  
You can also skip chapters by using [SKIP H / G],  
or entering the desired chapter number with  
the Number buttons.  
(for CD play only)  
• Virtual Surround System will be effective only when  
you set the sound mode to "STEREO". (Refer to  
"STEREO SOUND MODE" on page 17.)  
TITLE SEARCH  
1 During playback, press [MODE] repeatedly until  
SEARCH menu appears.  
K
L
] to display  
_/2 (SEARCH)  
2 Use [  
/
TITLE SEARCH menu.  
3 Use the Number buttons to enter the desired title  
number. Playback will start at the selected title.  
• Press [CLEAR] to erase the incorrect input.  
• For single digit press [0] first, if the total number of  
titles of the disc is 10 or more.  
4 Press [RETURN] to exit the menu.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
REPEAT PLAYBACK  
TIME SEARCH  
1 During playback, press [MODE] repeatedly until  
REPEAT TRACK  
SEARCH menu appears.  
1 During playback, press  
[MODE] repeatedly until  
REPEAT menu appears.  
OFF (REPEAT)  
TOTAL  
0:0 _:_ _  
0:04:23  
K
L
] repeatedly to  
2 Use [  
/
display TIME SEARCH menu.  
2 Use [K / L] to select your desired repeat mode.  
• OFF: Repeat function off  
TRACK: Current track repeat  
ALL: All track repeat  
NOTE:  
3 Within 60 seconds, use the Number buttons to  
enter a desired disc time. Playback will start at  
the specified time.  
• Press [CLEAR] to erase the incorrect input.  
• When there is no need to enter a number, "0"  
appears automatically.  
• Repeat Track setting will be cleared when moving to  
other track.  
4 Press [RETURN] to exit.  
3 Press [RETURN] to exit the menu.  
MARKER SEARCH  
REPEAT TITLE / CHAPTER  
You can set markers to memorize your favorite  
places on a disc.  
1 During playback, press  
OFF (REPEAT)  
[MODE] repeatedly until  
1 During playback, press [MODE] repeatedly until  
REPEAT menu appears.  
SEARCH menu appears.  
2 Use [K / L] to select your desired repeat mode.  
2 Use [K / L] repeatedly to  
1
2
3
4
5
6
7
8
9
10 AC  
• OFF:  
Repeat function off  
__ __:__:__  
display MARKER SEARCH  
menu.  
CHAPTER: Current chapter repeat  
<Example: CD>  
TITLE:  
Current title repeat  
3 Use [s / B] to select a marker number among  
NOTES:  
1 to 10.  
• Repeat Title/Chapter is not available in some scenes.  
• The REPEAT setting will be cleared when moving to  
other title or chapter.  
4 When the track (or title) reaches your desired  
point, press [ENTER] to set a marker.  
3 Press [RETURN] to exit the menu.  
• The track (or title) number and  
elapsed playing time will appear  
on the TV screen.  
2
3
4
5
6
7
8
9
10 AC  
1
00:15:30  
REPEAT A-B  
OFF (A-B REPEAT)  
A- (A-B REPEAT)  
A-B (A-B REPEAT)  
A
A
A
B
B
B
1 Press [MODE] repeatedly until  
5 You can play from the desired point by selecting  
the marker number by using [s / B] and then  
pressing [ENTER].  
A-B REPEAT menu appears.  
2 Press [ENTER] at your desired  
starting point (A).  
6 To clear a marker, select the marker number and  
press [CLEAR]. To clear all markers at once,  
select "AC" with [s / B] and press [ENTER].  
To cancel it, press [CLEAR].  
3 Press [ENTER] again at your  
desired ending point (B).  
NOTE:  
The repeat sequence begins.  
• The following operation will also erase all markers:  
– Opening the disc tray  
Turning off the power  
– Pressing [SELECT]  
4 To exit the sequence, follow step 1 and press  
[ENTER] repeatedly until "OFF" appears and  
press [RETURN] to exit the menu.  
7 Press [RETURN] to exit the menu.  
NOTES:  
• The A-B repeat section can be set only within the cur-  
rent title (for DVDs) or current track (for Audio CDs).  
• A-B repeat is not available with some scenes in DVD.  
• A-B repeat playback is not available during other  
repeat playback.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DVD SECTION  
SPECIAL PLAYBACK FUNCTIONS & SETTINGS  
PROGRAMMED PLAYBACK  
You can determine the playing order of tracks.  
5 Press [STOP C] to temporarily stop the playback.  
You can resume the playback by pressing  
[PLAY B].  
1
In the stop mode, press [MODE].  
Press [STOP C] twice to cancel the pro-  
grammed playback.  
PROGRAM  
CD-DA  
TOTAL 0:00:00  
• The PROGRAM screen appears.  
1
2
3
4
5
6
7
3:40  
4:30  
5:00  
3:10  
5:10  
1:30  
2:30  
NOTE:  
ENTER  
1/4  
1/1  
PLAY  
1
3:40  
CLEAR  
• REPEAT setting is available during programmed  
playback. (Refer to "REPEAT TRACK" on page 19.)  
K
L
] to select a track,  
2 Use [  
/
PROGRAM  
CD-DA  
TOTAL 0:14:25  
then press [ENTER].  
RANDOM PLAYBACK  
1
2
3
4
5
6
7
3:40  
1
3
3:40  
5:00  
4:30  
5:00  
3:10  
5:10  
1:30  
2:30  
10 1:30  
12 2:45  
6
1:30  
NOTES:  
• Up to 99 tracks can be entered.  
This function shuffles the playing order of  
tracks.  
ENTER  
1/4  
1/1  
PLAY  
6
1:30  
CLEAR  
• Press [CLEAR] to erase the  
most recently entered track.  
1 In the stop mode, press  
RANDOM  
CD-DA  
TOTAL 0:45:55  
[MODE] twice.  
• If you enter more than 8 tracks, you can change  
pages of the program list with [SKIP H / G].  
To erase all tracks in the program at once, select "ALL  
CLEAR" at the bottom of the track list.  
RANDOM PROGRAM  
no indication  
-
-
-
-
• The RANDOM screen appears.  
PLAY  
3 Repeat step 2 until you select all the tracks you  
2 Press [PLAY B] to start random playback.  
want to play in the program.  
NOTE:  
• REPEAT setting is available during random playback.  
(Refer to "REPEAT TRACK" on page 19.)  
4 Press [PLAY B] to play the programmed tracks.  
3 Press [STOP C] to stop random playback.  
N-SCREEN INFORMATION  
O
You can check the information about the current disc by pressing [DISPLAY].  
For DVD-Videos  
For Audio CDs  
1 Press [DISPLAY] during playback to show cur-  
1 Press [DISPLAY] during playback to show the  
rent Chapter.  
current Track.  
• The elapsed and remaining  
playing time of the current  
chapter will be displayed.  
• The elapsed and remaining  
playing time of the current  
track will be displayed.  
4/12 0:03:21 - 0:02:15  
T
9/49  
0:00:00 -0:03:30  
2 Press [DISPLAY] again to show current Title.  
2 Press [DISPLAY] again to show current Total  
Track.  
• The elapsed and remaining  
1/3 0:00:00 - 1:23:45  
4/12 0:13:45 - 0:45:40  
T
playing time of the current title  
will be displayed.  
• The elapsed and remaining  
playing time of the total track  
will be displayed.  
PROGRAM  
B
3 Press [DISPLAY] again.  
• The bit rate and the current  
repeat setting will be displayed.  
T
L1  
When in the PROGRAM  
or RANDOM mode.  
• If you are playing a dual layered disc, the layer  
number will also be displayed  
(L0: Layer 0 is playing. L1: Layer 1 is playing).  
3 Press [DISPLAY] again to exit.  
4 Press [DISPLAY] again to exit.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
HANGING THE DVD SET UP ITEMS  
C
You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.  
The set up items are shown in the diagram below.  
Press [SET-UP] twice  
QUICK  
CUSTOM  
INITIALIZE  
AUDIO  
SUBTITLE  
LANGUAGE (P.21)  
DISC MENU  
TV MODE  
STILL MODE  
TV MODE  
DISPLAY (P.22)  
AUDIO (P.22)  
DRC  
DOWN SAMPLING  
DOLBY DIGITAL  
DOLBY DIGITAL  
PARENTAL LEVEL  
PASSWORD CHANGE  
PARENTAL (P.22)  
OTHERS (P.23)  
ANGLE ICON  
AUTO POWER OFF  
CUSTOM MENU  
1 In the stop mode, press  
[SET-UP] twice to display the  
DVD SETUP menu.  
SETUP  
A
LANGUAGE SETTING  
QUICK  
CUSTOM  
INITIALIZE  
SETUP  
LANGUAGE  
4 Use [K / L] to select the  
desired item, then press  
[ENTER].  
AUDIO  
SUBTITLE  
DISC MENU  
ORIGINAL  
OFF  
ENGLISH  
NOTES:  
• Pressing [SET-UP] once will  
show TV SETUP menu partly.  
K
L
SET:ENTER  
SELECT:  
/
EXIT:SETUP CANCEL:RETURN  
• AUDIO:  
Sets the audio language.  
• If the menu does not appear, press [STOP C] first.  
Make sure the unit is in DVD mode before setting.  
• SUBTITLE: Sets the subtitle language.  
• DISC MENU: Sets the language for DVD menu.  
5 Use [K / L] to select your desired language  
2 Use [K / L] to select "CUSTOM", then press  
from the list, then press [ENTER].  
[ENTER].  
SETUP  
CUSTOM  
6 Press [SET-UP] to exit the menu.  
3 Use [K / L] to select the  
desired item, then press  
[ENTER].  
LANGUAGE  
DISPLAY  
AUDIO  
PARENTAL  
OTHERS  
NOTES:  
SETUP  
LANGUAGE  
• If your desired language is not  
on the list, select "OTHER" and  
enter the code of the language.  
(Refer to "LANGUAGE CODE  
LIST" on page 27.)  
LANGUAGE CODE  
Refer to the pages below for  
continuation to set up each item.  
Please enter a 4-digit language code.  
• LANGUAGE setting: P21  
• DISPLAY setting:  
• AUDIO setting:  
PARENTAL setting: P22  
• OTHERS setting: P23  
A
B
C
D
E
P22  
P22  
• This feature may not be valid due to default setting  
of the disc. In this case, press [MODE] to select the  
language. (Refer to "AUDIO MENU" on page 17.)  
• If you select a language that is not supported by the  
disc, subtitle will be "OFF" automatically and the  
default language of the disc will be selected.  
To change the language for the on-screen menus,  
call up the TV SETUP menu by pressing  
[SET-UP] once and set the language. (Refer to "ON-  
SCREEN MENU LANGUAGE" on page 11.)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
DVD SECTION  
CHANGING THE DVD SET UP ITEMS  
B
C
DISPLAY SETTING  
AUDIO SETTING  
4 Use [K / L] to select an item,  
SETUP  
DISPLAY  
Choose the appropriate Audio settings for your  
equipment as it only affects during the playback of  
DVD discs.  
then press [ENTER].  
TV MODE  
STILL MODE  
4:3 LETTER BOX  
AUTO  
QUICK  
• TV MODE:  
K
L
] to select an item,  
4 Use [  
/
SETUP  
AUDIO  
You can change certain aspects of the DVD display  
screens and on-screen messages on the TV screen.  
then press [ENTER] repeated-  
ly until your desired setting  
appears.  
DRC  
DOWN SAMPLING  
DOLBY DIGITAL  
ON  
ON  
BITSTREAM  
• 4:3 LETTER BOX (default):  
To show black bars on top and  
bottom of the screen.  
• 4:3 PAN & SCAN:  
To show a full height picture with both sides  
trimmed.  
SETUP  
DISPLAY  
TV MODE  
4:3 LETTER BOX  
4:3 PAN & SCAN  
• DRC (Dynamic Range Control):  
• ON : To compress the range of soft to loud sound.  
(default)  
• OFF : Output the original sound.  
NOTE:  
• DOWN SAMPLING:  
• ON : Output in 48kHz. (default)  
• OFF : Output the original sound.  
You can access this setting directly by selecting  
"QUICK" at step 2 on page 21.  
• STILL MODE:  
This function allows you to adjust picture resolution  
and quality in the still mode.  
NOTE:  
• When playing a disc with copyright protection, the  
sound will be output at 48kHz even if the setting is  
"OFF".  
SETUP  
DISPLAY  
STILL MODE  
AUTO  
FIELD  
FRAME  
• AUTO (default):  
Automatically select the best  
QUICK  
• DOLBY DIGITAL:  
• BITSTREAM: Output a Dolby Digital signal.  
(default)  
resolution setting (FRAME or FIELD) based on  
the data characteristics of the pictures.  
• FIELD:  
Select "FIELD" when the pictures are still unstable  
even if "AUTO" is selected. FIELD stabilizes the  
pictures, although the picture quality may become  
coarse due to the limited amount of data.  
• FRAME:  
Select "FRAME" to display relatively motionless  
pictures in higher resolution. FRAME improves  
the picture quality, although it may unstabilize the  
pictures due to simultaneous output of two field  
data.  
• PCM:  
Convert the Dolby Digital to PCM.  
(2 channel stereo)  
NOTES:  
You can access this setting directly by selecting  
"QUICK" at step 2 on page 21.  
• Set to "BITSTREAM" when the unit is connected to  
a Dolby Digital Decoder.  
5 Press [SET-UP] to exit the menu.  
5 Press [SET-UP] to exit the menu.  
D
PARENTAL SETTING  
This feature allows you to set the rating level of your  
DVD discs. Playback will stop if the disc ratings  
exceed the level you set.  
PARENTAL LEVEL  
4 Enter four-digit password with  
SETUP  
PARENTAL  
PASSWORD  
the Number buttons, then  
Please enter a 4-digit password.  
press [ENTER].  
NOTE:  
• Enter any 4 digits (except for 4737) to set the pass-  
word for the first time, and record it for your memory.  
5 Use [K / L] to select  
SETUP  
PARENTAL  
"PARENTAL LEVEL", then  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
press [ENTER].  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
E
OTHER SETTING  
SETUP  
PARENTAL  
6 Use [K / L] to select the  
desired level, then press  
[ENTER].  
PARENTAL LEVEL  
K
L
] to select an item,  
4 Use [  
/
SETUP  
OTHERS  
ALL  
8 [ADULT]  
7 [NC-17]  
6 [R]  
ANGLE ICON  
AUTO POWER OFF  
ON  
ON  
then press [ENTER] repeated-  
ly to set the feature "ON" or  
"OFF".  
7 Press [SET-UP] to exit the menu.  
• ANGLE ICON:  
CONTROL LEVELS  
• ON: To show the angle icon when multiple  
camera angles are available during DVD  
playback. (default)  
ALL: All parental locks are cancelled.  
8 [ADULT]: DVD software of any grade  
(adult/general/children) can be played back.  
• OFF: To keep angle icon from the display.  
7 to 2: Only DVD software intended for general  
use and children can be played back.  
• AUTO POWER OFF:  
• ON: To activate screen saver program and turn  
off the unit automatically. (default)  
1 [KID SAFE]: Only DVD software intended for  
children can be played back, with those intended  
for adult and general use prohibited.  
• OFF: To deactivate Auto Power Off function.  
NOTE:  
• The screen saver program starts when there is no  
input from the unit for 5 minutes in the stop mode.  
After the screen saver program is activated for 15  
minutes, the power is automatically turned off.  
NOTE:  
• With some DVDs, it may be difficult to find if they are  
compatible with parental lock. Be sure to check if the  
parental lock function operates in the way that you  
have set.  
5 Press [SET-UP] to exit the menu.  
PASSWORD CHANGE  
SETUP  
PARENTAL  
4 Enter current password with  
the Number buttons, then  
press [ENTER].  
PASSWORD  
Enter current password.  
INITIALIZE  
This allows you to return all items of  
SETUP  
PARENTAL  
5 Use [K / L] to select  
"PASSWORD CHANGE", then  
press [ENTER].  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
SETUP menu (except for PARENTAL  
setting and menu language) to their default settings.  
SETUP  
PASSWORD  
Please enter a 4-digit password.  
PARENTAL  
6 Enter four-digit password with  
the Number buttons, then  
press [ENTER].  
1 In the stop mode, press [SET-UP] twice to  
display the DVD SETUP menu.  
1
2
3
4
Don't forget the password.  
Press 'ENTER' to activate password.  
SETUP  
2 Use [K / L] to select  
QUICK  
"INITIALIZE", then press  
CUSTOM  
7 Press [SET-UP] to exit the menu.  
INITIALIZE  
[ENTER].  
NOTE:  
• If you forget the current password, enter 4737 first,  
then enter your new password.  
The former password will be cleared and parental  
level will be set to "ALL" (default).  
3 Use [K / L] to select "YES",  
SETUP  
INITIALIZE  
then press [ENTER] twice.  
To cancel the initialization,  
select "NO".  
Initialize?  
NO  
YES  
4 Press [SET-UP] to exit the menu.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
ROUBLESHOOTING GUIDE  
T
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following  
guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a perfor-  
mance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It  
could save your time and money.  
SYMPTOM  
No power  
POSSIBLE REMEDY  
Make sure the power plug is connected to an AC outlet.  
(In case of power failure) Check the breaker.  
PAGE  
9
--  
No operation by remote control  
7
Check if the batteries are weak or inserted incorrectly.  
Replace weak batteries and insert with their polarities  
(+/- signs) as indicated.  
--  
Aim the remote control at the remote sensor and operate  
within 23 feet (7 m) of the unit.  
--  
26  
9
Remove all obstacles to clear the path of the infrared signal.  
Check the infrared signal output.  
Select the correct mode to operate by pressing [SELECT].  
The operable range from the unit is 10 feet (3 m) within 15˚.  
--  
Poor or no picture  
6
Check if antenna or cable is connected properly.  
Check for the broken pin or wire of antenna cable.  
Check for source of reception disturbance.  
--  
--  
9
11  
--  
10  
--  
Press [SELECT] to select the correct mode.  
Perform channel scanning to memorize available TV channels.  
Try another channel. If OK, then possible station problem.  
Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).  
Check for magnetism from nearby appliances and try  
degaussing.  
X
Y
].  
Poor or no sound  
--  
--  
Adjust volume control using [  
/
VOL.  
Try another channel. If OK, then possible station problem.  
Misspelling in captions  
--  
--  
Error committed by the closed captioning production company.  
Possible in a live broadcast. Not in case of a prerecorded pro-  
gram.  
Text is not shown in its entirety  
or a delay occurs from what is  
being said  
--  
A few seconds of delay is common for live broadcast.  
If a dialogue exceeds the display capacity (220 words per  
minute), selective editing is used so that the captions remain  
up-to-date with the current TV screen dialogue.  
Captions scrambled with white  
boxes  
--  
--  
Caused by interferences of building, power lines, thunder-  
storms, etc.  
No captions in a program which  
must contain closed caption  
The broadcast may use a time compression process to speed  
up the program. The decoder cannot read the compressed  
information and captions will be lost.  
No captions in a pre-recorded  
videotape with indicated closed  
captions included  
--  
Possibility of a illegal copy or an erroneous copying process  
accidentally performed by the fabricator.  
Black box in the TV screen  
10  
You are in TEXT mode. Select CAPTION mode or "OFF".  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
SYMPTOM  
No picture  
POSSIBLE REMEDY  
This unit cannot play DVD-RAM/CD-i/Photo CD/Video  
CD/DVD with region codes other than "1" and "ALL".  
PAGE  
14  
Disc cannot be played  
No sound  
Clean the disc.  
Place the disc correctly, with the label side up.  
Cancel the parental setting or change the control level.  
26  
15  
22  
Correct the audio output settings.  
Confirm the power and audio settings of external audio com-  
ponent.  
22  
--  
No DTS audio is output  
Distorted picture  
This unit does not support DTS audio. This is not a malfunc-  
tion.  
--  
During the playback of a 2-layered disc, pictures may stop for --  
a moment. This happens while the 1st layer is being switched  
to the 2nd layer. This is not a malfunction.  
This happens right after fast forwarding or rewinding.  
--  
Audio or subtitle language does The selected language is not available for audio or subtitle on  
21  
not match the setting  
the DVD.  
The camera angle cannot be  
changed  
The DVD does not contain sequences recorded from different  
camera angles.  
17  
21  
15  
--  
Audio or subtitle language can-  
not be changed  
The DVD does not contain audio source or subtitles in the  
selected language.  
"Prohibited icon" appears on the That operation is not available by the unit or the disc.  
screen  
CD/DVD sound dropout  
No CD/DVD reproduction  
DVD picture poor  
Scratched disc. Replace with an unscratched one.  
NOTES:  
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s  
Manual for details on correct operations.  
• Playback from a desired track and random playback are not available during playback.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
AINTENANCE  
M
DEGAUSSING  
IR SIGNAL CHECK  
A degaussing circuit in this unit clears up color  
errors on the TV screen. Color errors occur when  
there is any excess magnetism close to the unit.  
This circuit is designed to operate once when the  
unit is first plugged in. If you see minor color  
errors on the screen, unplug the unit for approx-  
imately 30 minutes. When you plug the unit again,  
the degaussing circuit will operate to clear errors.  
Take this step any time the TV screen is accidental-  
ly magnetized or when you move the unit.  
Use the AM radio or the digital camera to check if  
the remote control properly sends out the infrared  
signal. It will help to define the cause of malfunction.  
Using AM radio  
Tune the AM radio to no broadcasting band.  
Press any button on remote control toward  
the radio. If the radio receives the signal  
from remote control properly, the sound will  
flutter.  
Using digital camera  
(including built-in camera of cellular  
phone)  
• Press and hold any button on remote control  
toward a digital camera. The remote control is  
working if you confirm infrared light through the  
digital camera.  
IF THE LASER OPTICAL PICKUP UNIT IS  
DIRTY  
• If the unit still does not perform properly when it is  
operated, while referring to the relevant sections  
and to “TROUBLESHOOTING GUIDE” in this  
Owner’s Manual, the laser optical pickup unit may  
be dirty. Consult your dealer or an Authorized  
Service Center for inspection and cleaning of the  
laser optical pickup unit.  
DISC HANDLING  
• Handle the discs so that fingerprints and dust do  
not adhere to the surfaces of the discs.  
CABINET CLEANING  
• Always store the disc in its protective case when it  
is not used.  
• Wipe the front panel and other exterior surfaces of  
the unit with a soft cloth immersed in lukewarm  
water and wrung dry.  
To clean-off, use a soft cloth.  
• Do not use a hard cloth since this  
will mar the disc.  
• Never use a solvent or alcohol. Do not spray  
insecticide liquid near the unit. Such chemicals  
may cause damage and discoloration to the  
exposed surfaces.  
• Wipe the disc in a straight line from center to edge.  
• Never wipe with a circular motion.  
• Do not use detergent or abrasive clean-  
ing agents.  
SERVICING  
• Should your unit become inoperative, do not try to  
correct the problem by yourself. There are no  
user-serviceable parts inside. Turn off, unplug the  
power cord and please call our help line men-  
tioned on the front page, to locate an Authorized  
Service Center.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PPENDIX  
A
CABLE CHANNEL DESIGNATIONS  
If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels  
with letters or letter-number combinations. Please check with your local cable company. The following is a  
chart of common cable channel designations.  
CATV channel  
TV Display  
5A  
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
10  
10  
11  
11  
12  
12  
13  
13  
A
B
14  
15  
CATV channel  
TV Display  
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
CATV channel  
TV Display  
R
S
T
U
V
W
W+1  
37  
W+2  
38  
W+3  
39  
W+4  
40  
W+5  
41  
W+6  
42  
W+7  
43  
W+8  
44  
W+9  
45  
31  
32  
33  
34  
35  
36  
CATV channel  
TV Display  
W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24  
46 47 48 49 50 51 52 53 54 55 56 57 58 59 60  
W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39  
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75  
W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54  
CATV channel  
TV Display  
CATV channel  
TV Display  
76  
W+55 W+56 W+57 W+58  
91 92 93 94  
77  
78  
79  
80  
81  
82  
83  
84  
85  
W+59 W+60 W+61 W+62 W+63 W+64  
100 101 102 103 104 105  
86  
87  
88  
89  
90  
A-5  
95  
A-4  
96  
A-3  
97  
A-2  
98  
A-1  
99  
CATV channel  
TV Display  
CATV channel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79  
TV Display  
106  
W+80 W+81 W+82 W+83 W+84  
121 122 123 124 125  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
117  
118  
119  
120  
CATV channel  
TV Display  
LANGUAGE CODE LIST  
Language  
Code Language  
German [GER]  
Code  
Language  
Code Language  
Code  
A-B  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
Mongolian  
Nauru  
Nepali  
5960  
6047  
6051  
Somali  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
C-E  
Cambodian  
Catalan  
Chinese [CHI]  
Corsican  
Croatian  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
F-H  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Spanish [SPA]  
Sundanese  
Swahili  
Norwegian [NOR] 6061  
O-R  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Occitan  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish [POL]  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
Hebrew  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Hindi  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Portuguese [POR] 6266  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
Quechua  
6367  
Rhaeto-Romance 6459  
Irish [IRI]  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
6461  
6467  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
U-Z  
Kashmiri  
Kazakh  
Ukrainian  
Urdu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean [KOR]  
Kurdish  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
Singhalese  
Siswat  
Slovak  
Slovenian  
Faroese  
Fiji  
Finnish [FIN]  
French [FRE]  
Frisian  
Galician  
Georgian  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
If you choose a language that has a 3 letter language  
code, the code will be displayed every time you change  
the AUDIO or SUBTITLE language setting. If you  
choose any other languages, '---' will be displayed  
instead. (3 letter language code is written in bracket.)  
Marathi  
Moldavian  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
PECIFICATIONS  
S
GENERAL SPECIFICATIONS  
OTHER SPECIFICATIONS  
Terminals  
TV  
CRT:  
Antenna input:  
VHF/UHF/CATV  
20 inch in-line gun,  
75 ohm unbalanced  
(F-type)  
RCA connector × 1  
RCA connector × 2  
1/8" stereo (3.5 mm)  
90˚ deflection tube  
NTSC-M  
§15.119/FCC  
Television system:  
Closed caption system:  
Tuner channel  
TV  
Video input:  
Audio L/R input:  
Headphone:  
Coaxial digital  
audio output:  
VHF Low:  
VHF High:  
UHF:  
CATV  
VHF:  
MID band:  
SUPER band:  
HYPER band:  
#2~#6  
#7~#13  
#14~#69  
One pin jack,  
500 m Vpp (75 ohm)  
Digital encoded  
infrared light system  
5°C to 40°C  
(41°F~104°F)  
AC 120 V, 60 Hz  
80 W  
Remote control:  
5A  
Operating temperature:  
Power requirements:  
Power consumption  
(Maximum):  
A5~A1, A~I  
J~W  
W+1~W+84  
DVD  
Product type:  
Discs:  
Picture tube:  
Dimensions:  
20"  
DVD Player  
DVD video, Audio CD  
NTSC color  
H: 18" (457mm)  
W: 20-3/16" (512mm)  
D: 19-7/8" (505mm)  
Output signal format:  
Weight:  
45.2 lbs. (20.5kg)  
ELECTRICAL SPECIFICATIONS  
Sound output:  
2 speakers, 1W, 8 ohm  
• Designs and specifications are subject to change without notice.  
• If there is a discrepancy between languages, the default language will be English.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
NDICE DE CONTENIDO  
Í
PREPARATIVOS PARA EL USO . . . . . . . . . . . .29  
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .29  
CONEXIÓN A UN DISPOSITIVO EXTERNO  
SECCIÓN DVD  
(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL  
(TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .33  
MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .33  
SECCIÓN TV  
FUNCIONAMIENTO Y AJUSTES DEL  
TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . .31  
INSTALACIÓN INICIAL . . . . . . . . . . . . . . . . . . . . .31  
PARA VER UN PROGRAMA DE TELEVISIÓN . . . .31  
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .32  
IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .32  
REPARATIVOS PARA EL USO  
P
CONEXIONES DE ANTENA/CABLE  
Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.  
Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte  
la caja con esta unidad, como se indica a continuación.  
Cable  
Señal de TV  
Antena  
o
ANT.  
COAXIAL  
Cable entrante desde antena  
casera/empresa de cable (sin  
caja de cable)  
Parte trasera de la  
unidad  
ANT.  
Caja de cable o caja de satélite*  
O
OUT  
IN  
*NOTA  
(NO DESCONECTAR DE LA CAJA)  
Algunos sistemas de TV por cable utilizan  
señales cifradas y requieren un convertidor  
especial para recibir estos canales.  
Cable entrante desde empresa de cable  
o antena de satélite  
Consulte con su empresa de cable local.  
NOTA:  
Para su seguridad y  
Patilla doblada  
Antes de enchufar la antena en la  
toma ANT. de la unidad, compruebe  
que la patilla no está doblada. Si  
está doblada, enderece la patilla  
como se indica en la ilustración y  
enchufe la patilla a la toma ANT. de  
la unidad.  
para evitar daños en la  
unidad, desenchufe el  
cable de la antena de la  
toma ANT. antes de  
mover la unidad.  
Cable  
Enchufe  
(Debe ser  
enderezada)  
(Patilla recta)  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES  
PREPARATIVOS PARA EL USO  
CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)  
Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice  
las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.  
Conecte las tomas de salida de Audio/Vídeo de otra fuente a las tomas AUDIO L/R y  
VIDEO de esta unidad.  
AUX  
A continuación, utilice [SELECT] o [CH.  
K
/
L
] hasta que aparezca "AUX" en la pantalla.  
POWER  
OPEN / CLOSE  
VIDEO  
L
-
AUDIO  
-
R
HEADPHONE  
VOLUME  
CH.  
STOP  
PLAY  
SELECT  
Por ejemplo,  
videograbadora o  
videocámara, etc.  
A las tomas de salida de audio  
Parte frontal de la  
unidad  
(ENTRADA)  
Cable de audio  
(disponible en el mercado)  
OPEN / CLOSE  
(SALIDA)  
(SALIDA)  
VIDEO  
L
-
AUDIO  
-
R
HEADPHONE  
(ENTRADA)  
A la toma de salida de vídeo  
Cable de vídeo (disponible en el mercado)  
NOTA:  
Cuando conecte una VIDEOGRABADORA monoaural (otra fuente) a esta unidad, conecte la toma de salida de audio de  
la videograbadora monoaural (otra fuente) a la toma AUDIO L de esta unidad. El sonido saldrá igualmente por ambos  
canales L y R (izquierdo y derecho).  
CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA)  
Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.  
Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para  
reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conéctela a un  
decodificador Dolby Digital.  
Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.  
ANT.  
COAXIAL  
COAXIAL  
A la toma COAXIAL  
(Solamente DVD  
AUDIO OUT)  
(SALIDA)  
Decodificador  
Dolby Digital  
A la toma de entrada de  
o
audio coaxial digital  
(ENTRADA)  
Cable de audio coaxial  
digital (disponible en el  
mercado)  
Platina MD,  
platina DAT, etc.  
A la toma de entrada de  
audio coaxial digital  
(ENTRADA)  
NOTAS:  
• La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado como sonido  
digital por una platina MD o DAT.  
• Asegúrese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.  
• Consulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.  
• Para conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de  
ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM" (consulte "AUDIO SETTING" en  
página 22). Utilizar una unidad con unos ajustes incorrectos puede generar distorsión de ruido y puede asimismo dañar  
los altavoces.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES  
SECCIÓN TV  
UNCIONAMIENTO Y AJUSTES DEL TELEVISOR  
F
PARA VER UN PROGRAMA DE TELEVISIÓN  
INSTALACIÓN INICIAL  
TV  
TV  
Cuando se enciende la unidad por primera  
vez, se muestra la pantalla de IDIOMA  
TV  
TV  
1 Presione [POWER] para encender la  
unidad.  
INICIAL. Seleccione el idioma de visualización de  
pantalla y ejecute la autoprogramación del canal.  
NOTES:  
-
SUGERENCIAS ÚTILES  
-
1.VERIFIQUE ANTENA/CABLE/  
SATÉLITE ESTÁ BIEN  
CONECTADO.  
2.VERIFIQUE  
“AUTOPROGRAMACIÓN DE CA.”  
ESTÁ BIEN AJUSTADO.  
3.LEA LA PÁGINA FRONTAL  
DEL MANUAL DEL USUARIO  
O
NO.TEL.DE AYUDA  
CLIENTES.  
Si la pantalla del televisor  
muestre interferencias “de nieve”  
y no funcione bien durante más  
de 10 segundos, aparecerá  
“SUGERENCIAS ÚTILES”.  
•Compruebe si la antena o el cable están conectados  
correctamente. (Consulte “CONEXIONES DE  
ANTENA/CABLE” en página 29).  
• Ajuste “AUTOPROGRAMACIÓN DE CA.en el menú  
de AJUSTE DE CANAL. (Consulte “AJUSTE DE  
CANALen página 32).  
• Si pese a todo esos ajustes no funcionan  
correctamente, llame a nuestro teléfono de asistencia  
(en la página frontal en este manual del usuario).  
1 Después de finalizar la conexión de la  
antena o del cable, conecte el cable de  
alimentación a una toma estándar de CA.  
PANEL TRASERO PARA EL  
A
LOS  
2 Presione [POWER] para encender la unidad.  
3 Presione cualquier tecla para  
SELECT LANGUAGE  
seleccionar el idioma del menú  
ENGLISH  
de pantalla.  
Y
H
X
H
K
H
NEXT:PRESS VOL  
ESPAÑOL  
DESPUÉS:PRESIONE VOL  
Y
X
• ENGLISH: [VOL.  
• ESPAÑOL: [VOL.  
• FRANÇAIS: [CH.  
]
]
FRANÇAIS  
APRÈS:PRESSEZ CH.  
K
L
] o los botones numéricos  
2 Utilice [CH.  
/
K
]
para seleccionar el número de canal deseado.  
4 Confirme la conexión de la  
antena (o del cable) y presione  
[PLAY B].  
Para utilizar los botones numéricos  
•Canales de un dígito: (Ej.: 02, 03, 04, etc.)  
Presione primero [0] para seleccionar un canal de un  
dígito.  
•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)  
Presione dos dígitos directamente.  
•Canales de tres dígitos: (Ej. 115, 125 ...)  
Presione primero [+100], y luego presione los últimos  
dos dígitos.  
– INSTALACIÓN INICIAL –  
CONECTE LA ANTENA O  
CABLE O SATÈLITE EN  
ESTA UNIDAD.  
PRESIONE PLAY,  
PARA REALIZAR EL  
“AUTOPROGRAMACIÓN  
DE CA.”.  
• El sintonizador explora y  
memoriza todos los canales  
activos de su zona.  
5 Cuando la exploración ha  
finalizado, el sintonizador se  
detiene en el canal  
CA 15  
3 Utilice [VOL. X / Y] para ajustar el volumen.  
(Ejemplo)  
memorizado más bajo.  
Presione [MUTE] para  
silenciar al instante el sonido.  
Presione de nuevo para  
restaurar el nivel de sonido anterior.  
NOTAS:  
VOLUMEN 20  
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
• Puede salir del menú INSTALACIÓN INICIAL  
presionando [SET-UP]. Si el botón se presiona durante  
la exploración de canales, el sintonizador interrumpe la  
exploración y se muestra el canal memorizado más bajo.  
NOTA:  
El menú INSTALACIÓN INICIAL se muestra cada  
vez que usted enciende la unidad a menos que la  
exploración se haya finalizado.  
• Incluso aunque apague la unidad en el modo DVD,  
la unidad estará en el modo TV cuando vuelva a  
encenderse.  
• En caso de que no pueda  
recibirse ningún canal mediante la  
PARA VER UN CANAL DE CABLE O SATÉLITE  
exploración de canales, “NO HAY  
SEÑAL DE TV” aparece en  
pantalla. Apague la unidad y  
compruebe la conexión de la  
NO HAY SEÑAL DE TV  
Si la unidad está conectada a una caja de cable o de  
satélite, utilice [CH. K / L] para seleccionar CA3 o  
CA4 según el ajuste de canal de salida del dispositivo  
y seleccionar el canal deseado en dicho dispositivo.  
antena; a continuación, siga los pasos 1 a 5 otra vez.  
Puede cambiar el después de finalizar la INSTALACIÓN  
INICIAL mediante el menú IDIOMA o el menú AJUSTE DE  
CANAL. (Consulte “IDIOMA DE MENÚ DE PANTALLA” o  
“AJUSTE DE CANALen página 32).  
PARA VER UNA ENTRADA EXTERNA  
Cuando un equipo externo esté  
AUX  
conectado a las tomas de entrada  
frontales AUDIO/VIDEO, presione  
[SELECT] o [CH. K / L]  
repetidamente hasta que aparezca  
"AUX" en la pantalla.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES  
SECCIÓN TV  
FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR  
AJUSTE DE CANAL  
IDIOMA DE MENÚ DE PANTALLA  
TV  
TV  
TV  
TV  
Es necesario preseleccionar el canal al  
principio o en caso de haber movido el  
televisor a una zona distinta.  
Puede seleccionar el idioma del menú  
de pantalla entre inglés, español y  
francés.  
- TV PREP. -  
1 Presione [SET-UP].  
AUTOPROGRAMACIÓN DEL CANAL  
AJUSTE DE CANAL  
AJUSTE DE V-CHIP  
IDIOMA [ESPAÑOL]  
TÍTULO [OFF]  
Utilice [K / L] para ir hasta  
B
- TV PREP. -  
1 Presione [SET-UP].  
"IDIOMA".  
B
AJUSTE DE CANAL  
AJUSTE DE V-CHIP  
IDIOMA [ESPAÑOL]  
TÍTULO [OFF]  
Utilice [K / L] para ir hasta  
"AJUSTE DE CANAL", y  
presione [ENTER].  
2 Presione [ENTER] repetidamente para  
seleccionar "ENGLISH", "ESPAÑOL" o  
"FRANÇAIS".  
2 Utilice [K / L] para ir hasta  
"AUTOPROGRAMACIÓN DE  
CA.", y presione [ENTER].  
– AJUSTE DE CANAL –  
AGREGAR / BORRAR (CATV)  
AUTOPROGRAMACIÓN DE CA.  
3 Presione [SET-UP] para salir del menú.  
B
NOTAS:  
El sintonizador explora y memoriza todos los  
canales activos de su zona.  
• Esta función afecta solamente al idioma del menú de  
pantalla y no a la fuente de sonido.  
• Si por alguna razón el menú ya está en inglés o en  
francés, presione [SET-UP] y mediante [K / L] vaya  
a "LANGUAGE [ENGLISH]" o "LANGAGE [FRANÇAIS]",  
y presione [ENTER] repetidamente para seleccionar  
el idioma deseado, y presione  
CA 15  
3 Cuando la exploración ha  
finalizado, se muestra el canal  
memorizado más bajo.  
(Ejemplo)  
Si en la pantalla del televisor  
aparece "NO HAY SEÑAL DE  
TV", compruebe la conexión  
de la antena y vuelva a  
intentar.  
[SET-UP].  
NO HAY SEÑAL DE TV  
NOTAS:  
• La unidad puede reconocer canales de CATV como  
canales de TV si el estado de la recepción es  
deficiente. En tal caso, compruebe la conexión de la  
antena y vuelva a intentar "AUTOPROGRAMACIÓN  
DE CA.".  
La autoprogramación del canal NO es necesaria  
cuando está conectado a una caja de cable o de  
satélite. Simplemente seleccione el canal para  
entrada de caja de cable o de satélite (ej. CA3 o  
CA4) en la unidad, y seleccione el canal deseado  
en la caja de cable o de satélite.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES  
SECCIÓN DVD  
AVANCE RÁPIDO / RETROCESO RÁPIDO  
REPRODUCCIÓN BÁSICA  
• Durante la reproducción, mantenga  
presionado [FWD D] para avance  
rápido o [REV E] para retroceso rápido.  
• Cada vez que mantenga  
1 Presione [POWER] para  
encender la unidad.  
D1  
2 Presione [OPEN/CLOSE A].  
presionado el botón, la  
reproducción se acelera y el  
nivel de velocidad aparece en la pantalla.  
3 Coloque el disco en la  
bandeja, con la etiqueta hacia  
arriba.  
NOTAS:  
En los discos DVD, la velocidad de avance/retroceso  
rápido es diferente según el disco. La velocidad  
aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).  
• En discos de CD de audio la velocidad aproximada  
es 1 (×2), 2 (×8) y 3 (×30).  
4 Presione [PLAY B].  
• La bandeja se cerrará automáticamente y se  
empezará la reproducción. Cuando reproduzca un  
DVD que incluya un menú de títulos, este menú  
puede aparecer en pantalla.  
Para volver a la reproducción normal, presione [PLAY  
B
].  
AVANCE LENTO / RETROCESO LENTO  
Durante la reproducción, presione [PAUSE  
F
].  
NOTAS:  
• Mantenga presionado [FWD D] para  
avance lento o [REV E] para retroceso lento.  
• Cada vez que mantenga  
• Cerrar la bandeja del disco manualmente o  
presionando [OPEN/CLOSE A] también inicia la  
reproducción.  
1
• Con discos DVD que utilicen títulos para señales de  
programa de reproducción, la reproducción puede  
comenzar desde el segundo título o puede omitir  
dichos títulos.  
presionado el botón, la  
reproducción se ralentiza y el  
nivel de velocidad aparece en la pantalla.  
NOTA:  
• La velocidad de avance/retroceso lento varía según  
el disco. La velocidad aproximada es 1 (1/16), 2 (1/8)  
y 3 (1/2).  
5 Para congelar la imagen, presione [PAUSE F]  
durante la reproducción.  
NOTA:  
• Para volver a la reproducción normal, presione  
[PLAY B].  
• El sonido se silenciará en modo de pausa.  
6 Presione [STOP C] para  
REANUDACIÓN ACTIVADA  
interrumpir temporalmente la  
Presione 'PLAY' para reproducir  
desde aquí.  
Para reproducir desde el inicio,  
primero presione 'STOP' y luego  
'PLAY'.  
MENÚ DE DISCO/MENÚ DE TÍTULO  
reproducción.  
• Presione [PLAY B] para  
reanudar la reproducción.  
Un DVD puede contener menús para explorar  
el disco y acceder a funciones especiales.  
• Para cancelar la reanudación y parar el disco,  
presione [STOP C] de nuevo.  
1 Presione [DISC MENU] o [TITLE].  
Aparecerá el menú principal/menú de título del DVD.  
Puede activar el menú incluso durante la reproducción.  
NOTAS:  
• La información de reanudación se conserva aunque  
se apague la unidad.  
K
L
s
B
] para seleccionar un  
2 Utilice [  
/
/
/
• Puede aparecer un "icono  
prohibido" en la zona superior  
derecha de la pantalla del  
televisor durante la operación. Esto significa que la  
operación no está disponible en el disco.  
elemento y presione [ENTER].  
NOTAS:  
• SI el disco tiene un menú de disco, aparecerán  
distintas opciones de selección: idioma de sonido,  
subtítulos, capítulos del título y otras.  
• El contenido del menú y las correspondientes  
operaciones de menú pueden variar según los  
discos. Para más detalles, consulte el manual que  
acompaña el disco.  
REPRODUCCIÓN PASO A PASO  
• Durante la reproducción, presione  
[PAUSE F].  
Puede avanzar la imagen fotograma a fotograma  
presionando repetidamente [PAUSE F].  
• Para volver a la reproducción normal, presione  
[PLAY B].  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ES  
MEMO  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or work-  
manship as follows:  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year  
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are  
excluded from this warranty.  
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the  
date of original retail purchase.  
LIMITS AND EXCLUSIONS:  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE  
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER  
WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,  
missing or if service was attempted by an unauthorized service center. This limited warranty does not  
apply to any product not purchased and used in the United States.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal  
use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alter-  
ations or product not supplied by FUNAI CORP., or damage which results from accident, misuse, abuse,  
mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as  
hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of  
God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR  
ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED  
BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU  
OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE  
PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS  
REPRESENTATIVES IN THE UNITED STATES.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SER-  
VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHO-  
RIZED SERVICE CENTER.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY HAVE OTHER RIGHTS  
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE  
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT  
FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITH-  
OUT PRIOR NOTICE.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,  
please contact us at:  
FUNAI CORPORATION  
Customer Service  
Tel :1-800-968-3429  
19900 Van Ness Avenue, Torrance, CA 90501  
Printed in Malaysia  
1EMN21313  
T9200UA★★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser TV Mount MZT 14 User Manual
Sharp Microwave Oven R 85ST AA User Manual
Shuttle Computer Group Server KD21 User Manual
Sony MP3 Player Accessories RM V310 User Manual
Sony Stereo Receiver DAV SC8 User Manual
Speco Technologies Security Camera CVC 1705 User Manual
Spin Master Handheld Game System Captain Bones Gold User Manual
Stiga Lawn Mower 13 2533 11 User Manual
Sunbeam Slow Cooker MU4000 User Manual
Swann Security Camera SW212 MXB User Manual