Sylvania Flat Panel Television LD190552 User Manual

Español

Français

English

19” LCD TV/DVD

LD190SS2

EN Owner's Manual

Need help?

Please call toll free or visit our web site below

FR Manuel du Propriétaire Besoin d’aide?

Appelez notre numéro gratuit ou visitez notre site web à l’adresse

ES Manual del Propietario ¿Necesita ayuda? Llame por favor sin costo ó visite nuestro sitio web en

1-866-321-3927

www.sylvaniaconsumerelectronics.com



MODEL NUMBER

SERIAL NUMBER

Download from Www.Somanuals.com. All Manuals Search And Download.

English

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference

unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an

unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

DECLARATION OF CONFORMITY

Trade Name: SYLVANIA

Responsible Party: FUNAI CORPORATION, Inc.

Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.

Telephone Number: 1-866-321-3927

Model: LD190SS2

This Class B digital apparatus complies with Canadian ICES-003. StandardTelevision Receiving Apparatus, Canada BETS-7/NTMR-7

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Disconnect the mains plug to shut off when find trouble or not in use.The mains plug shall remain readily operable.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this apparatus.

WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or

climbing on it. A falling unit can cause serious injury or even death.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due

to possible eye injury.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result

in hazardous radiation exposure.

CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.

LOCATION: Inside, near the deck mechanism.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy

protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.

Reverse engineering and disassembly are prohibited.

LAMP IN LCD CONTAINS MERCURY,DISPOSEACCORDINGTO LOCAL,STATE OR FEDERAL LAW.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE ABOUT RECYCLING

Trademark Information

•

This unit’s packaging materials are recyclable and

can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or

•

incinerated but disposed of in accordance with

your local regulations concerning chemical wastes.

•

HDMI, the HDMI Logo, and High-Deﬁnition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.

TO AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE

•

Do not handle the AC power cord with wet hands.

Do not pull on the AC power cord when disconnecting it

from an AC outlet. Grasp it by the plug.

•

Do not put your ﬁngers or objects into the unit.

LOCATION AND HANDLING

•

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

•

Do not install the unit in direct sunlight or in a place subject

to dust or strong vibration.

•

Avoid a place with drastic temperature changes.

Install the unit in a horizontal and stable position. Do not place

anything directly on top or bottom of the unit. Depending

on your external devices, noise or disturbance of the picture

and/or sound may be generated if the unit is placed too close

to them. In this case, please ensure enough space between the

external devices and the unit.

•

ENERGY STAR^®is a joint program of the U.S. Environmental

Protection Agency and the U.S. Department of Energy helping

us all save money and protect the environment through

energy efﬁcient products and practices.

•

Depending on the environment, the temperature of this unit

may increase slightly.This is not a malfunction.

Be sure to unplug the AC power cord from the AC outlet

before moving or carrying the unit.

Consumer Notice:

ThisTV has been set to maximize energy efﬁciency while

delivering the best possible picture using the factory installed

home mode settings.

Changing or enabling other features in thisTV (e.g. brightened

backlighting) will possibly increase energy consumption

beyond the original ENERGY STAR^®qualiﬁed limits.

DEW CONDENSATION WARNING

•

Dew condensation may form inside the unit in the following

conditions. If so, do not use this unit at least for a few hours

until its inside gets dry.

-The unit is moved from a cold place to a warm place.

- Under conditions of high humidity.

- After heating a cold room.

•

is a trademark of DVD Format/Logo Licensing

Corporation.

The American Academy of Pediatrics discourages television

viewing for children younger than two years of age.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Child Safety

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

Language Code List

Contents

Important Safety Instructions

Trademark Information

Child Safety

OPERATING DVD

Playable Media

Unplayable Media

Playback

Disc Menu

Resume Playback

Paused and Step-by-step Playback

Fast Forward/Fast Reverse

Slow Forward/Slow Reverse

Zoom

INTRODUCTION

Features

Symbols Used in this Manual

Supplied Accessories

Mounting the Unit onYour Furniture

Tilt Stand

Search Functions

Repeat Playback

Attaching the Base

Installing the Batteries

Remote Control Function

Control Panel

Repeat A-B Playback

Random Playback

Programmed Playback

On-screen Display

Special Settings

Terminals

PREPARATION

Antenna Connection

CONNECTING DEVICES

External Device Connection

Connection to Cable Receiver or Satellite Box

Plug In the AC Power Cord

Initial Setup

USEFULTIPS

Troubleshooting Guide

FAQ

WATCHINGTV

SleepTimer

Switching Each Input Mode

Channel Selection

Still Mode

INFORMATION

Glossary

Maintenance

General Speciﬁcations

Electrical Speciﬁcation

Other Speciﬁcations

Limited Warranty

TV Screen Display Mode

Sound Functions

TV Screen Information

USING FUNCTIONS

Picture

Sound

Channel

Features

Language

DVD

storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial

distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation

to notify any person or organization of such changes.

with the

design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written

consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this

manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse

of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to

the fullest extent of the law.

SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc., used under license.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

•

Resume Playback

Lets you resume playback from the point at which playback was

stopped.

Features

•

Bit Rate Indication

DRC (dynamic range control)

You can control the range of sound volume.

•

DTV/TV/CATV

You can use your remote control to select channels which are

broadcast in digital format and conventional analog format.Also,

cable subscribers can access their cableTV channels.

Accessing from MODE button

•

Information Display (ATSC only)

During playback

You can display the title, contents and other information of the

current DTV program on theTV screen.

•

Subtitles in a Desired Language

You can select a desired language for displaying subtitle, if that

language is available on a DVD-video.

Autoprogram

This unit automatically scans and memorizes channels available in

your area, eliminating difﬁcult setup procedures.

Selecting a Camera Angle

You can select the desired camera angle, if a DVD contains

sequences recorded from different angles.

Child Lock

This feature allows you to block children’s access to inappropriate

programs.

Zoom

Allows you to enlarge the size of picture image.

Closed Caption Decoder

Built-in closed caption decoder displays text for closed caption

supported programs.

•

Black Level Adjustment

Virtual Surround

•

MTS/SAPTuner

Audio can be selected from the remote control.

chapter search/title search/track search/time search

Auto Standby

If there is no input signal and no operation for 15 minutes, the

unit will go into standby mode automatically.

•

Marker

The part on the disc designated by user can be called back.

Repeat

chapter/title/track/all/A-B

•

SleepTimer

You can set the unit to go into standby mode after a speciﬁc

Accessing from MODE button

amount of time.

Choices for On-screen Language

Select your on-screen language:

English, Spanish or French.

Stereo Sound Function

PLL Frequency SynthesizedTuning

Provides free and easy channel selection and lets you tune

directly to any channel using the number and decimal point “•”

buttons on the remote control.

In stop mode

•

Program Playback for audio CD

You can program the order of tracks to play them back in

designated order.

•

Random Playback for audio CD

This unit can shufﬂe the order of tracks to play them back in

randomly.

•

Various Adjustment for Picture and Sound

Customizes image quality suitable for your room and sets your

sound preference.

Accessing from AUDIO button

During playback

fun-Link via HDMI Link (HDMI Cable not Included)

fun-Link allows your other HDMI link devices to be controlled by

the HDMI cable connected to yourTV.

•

Choices for Audio Language and Stereo Sound Function

Select your desired languages or stereo sound function when

different options are available on your disc.

•

HDMI Input

ComponentVideo Input

PC Input

S-Video Input

AV Input

Symbols Used in this Manual

The following is the description for the symbols used in this

Digital Audio Output

Headphone Audio Output

manual. Description refers to:

TV FUNCTIONS

ATSC

NTSC

: DigitalTV operation

DVD

:Analog/CableTV operation

•

Dolby Digital Sound

•

If neither symbol appears, the operation is applicable to

both.

Enjoy Dolby Digital multi-channel surround sound when you

connect the unit to your Dolby Digital decoder.

Still/Fast/Slow/Step Playback

Various playback modes are available including still pictures, fast

forward/reverse, slow motion and step frames.

DVD FUNCTIONS

DVD

: Playback of DVD-video

: Playback of audio CD

DVD Menus in a Desired Language

You can display DVD menus in a desired language, if available on

a DVD-video.

•

If neither symbol appears under the function heading,

operation is applicable to both.

Auto standby

If there is no operation for 20 minutes, the unit will go into

standby mode automatically.

Parental Lock

Block the viewing of a DVD-video unsuitable for children.

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied Accessories

Attaching the Base

You must attach the base to the unit to have it as a table top

unit. Be sure the front and rear of the base match the proper

direction.

Owner’s Manual

Quick Start Guide Registration card

If you have any questions, please visit our website at

www.sylvaniaconsumerelectronics.com

^QS^ut^ickart

Spread a thick and soft cloth over a table as shown at step 2.

Place the main unit face down onto it. Make sure not to

damage the screen.

Installation

Instalación

Insert 2 hooks under the

bottom of the main unit into

base holes. (shown by arrow

➁

TV base and 3 screws

(M4 x 12)

Remote Control

(NF033UD)

Batteries

), then move the base in

the direction as shown by

➀

(AA, 1.5V x 2)

arrow until it stops and the screw holes are aligned.

➁

Make sure not to put the AC power cord between the

base and the unit.

Drive Phillips head screws

into the 3 threaded holes at

the bottom of the base until

they are tight.

Note

• If you lose the screws, please purchase M4×12 Phillips head screws

at your local store.

• If you need to replace these accessories, please refer to the part

No. with the illustrations and call our toll free customer support

line found on the cover of this manual.

To remove the base from this unit

• Unscrew the Phillips head screws in step 3.

After the screws are removed, move the base in the opposite

direction as shown by arrow in step 2, then pull the base up toward

the rear of the unit. Be careful not to drop the base when you

remove it.

When using a universal remote control to operate this unit.

• Make sure the component code on your universal remote control

is set to our brand. Refer to the manual accompanying your

remote control for more details.

• We do not guarantee 100% interoperability with all universal

remote controls.

Note

• When attaching the base, ensure that all screws are tightly fastened.

If the base is not properly attached, it could cause the unit to fall,

resulting in injuries as well as damage to the unit.

• Make sure to use a table which can support the weight of this unit

and is larger than this unit.

Mounting the Unit onYour Furniture

Screw this unit on your furniture tightly using wood screws

• Make sure the table is in a stable location.

• When attaching the base, ensure that FRONT written on the

↑

(not supplied) in the 2 holes at the back of the base as shown.

base is upward. If it’s not upward, the 2 hooks don’t ﬁt in the base.

• Recommended screw dimension : 0.201 x 0.788 inches(5.1 x 20 mm)

rear of this unit

Installing the Batteries

Install the batteries (AA, 1.5V x 2) matching the polarity

indicated inside battery compartment of the remote control.

screw holes

Note

• When you remove this unit make sure to unscrew the wood

screws from your Wood Stand, Furniture and other wood item.

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery

compartment. Reversed batteries may cause damage to the

device.

• Do not mix different types of batteries together (e.g.Alkaline and

Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or

old batteries with fresh ones.

Tilt Stand

You can adjust the stand to

change the angle of the unit

(-2.5° to 10°).

-2.5°

10°

• If the device is not to be used for a long period of time, remove

the batteries to prevent damage or injury from possible battery

leakage.

• Do not try to recharge batteries; they can overheat and rupture.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

13 DISC MENU

14 TITLE

p.29

Remote Control Function

➠

p.29

15 A EJECT

16 AUDIO

p.29

p.7, 15, 32

Digital mode (DTV)

• Press to select the audio language.

Analog mode (TV)

• Press to select the audio mode.

DVD mode

• Press to select the audio language (DVD), or sound

mode (CD).

17 SLEEP

Press to activate the sleep timer.

p.14

➠

18 SCREEN MODE

p.15

➠

Press to select aspect ratio available for theTV screen.

19 INFO

Digital mode (DTV)

p.16, 32

➠

• Press to display the channel information, signal type and

TV setting.

Analog mode (TV)

• Press to display the channel number, signal type andTV

setting.

External input mode

• Press to display the external input mode, signal type

andTV setting.

DVD mode

• Press to display the current status.

1 INPUT SELECT

2 POWER

Press to turn the unit on and go into standby mode.To

completely turn off the unit, you must unplug the AC

power cord.

p.14

➠

p.13

20 CH ▲/▼

21 REV E/FWD D

22 STOP C

p.14

➠

p.29, 30

p.29

3 Number buttons

- (hyphen)

p.14

➠

23 PLAY B

p.29

24 CLEAR

p.30, 31

• Press to shift the subchannel from the main channel.

• Press to clear the numbers entered incorrectly.

• Press to cancel the point A for A-B repeat.

+10 button

• Press to select 10 or higher number of chapters.

• Press to remove the track number in program input

(CD).

4 SETUP

p.17

p.13

p.16

p.14

➠

25 MODE

p.7

➠

5 ENTER

• Press to arrange the playing order or playback

randomly (CD).

6 ▲/▼/◄/►(cursor)

7 BACK

• Press to set the black level (DVD) and the virtual

surround on or off.

• Press to change the camera angle to see the sequence

being played back from different angle (DVD).

8 CH RETURN

Press to return to previously viewed channel.

• Press to search chapter, title (DVD), track (CD) or time.

• Press to set the marker.

• Press to repeat playback chapter, title (DVD), track, disc

(CD) repeatedly or between designated point A and B.

• Press to magnify the part of picture (2x and 4x : DVD).

• Press to select the subtitles on the disc (DVD).

9 VOL. ▲/▼

p.15

p.30

➠

MUTE

11 SKIP H/G

Press to skip forward or backward chapters, titles (DVD)

or tracks (CD).

12 PAUSE F

p.14, 29

➠

TV mode

• Press to pause screen image.

DVD mode

• Press to pause the disc playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control Panel

(power)

p.13

➠

Press to turn the unit on and go into standby mode.To

completely turn off the unit, you must unplug the AC

power cord.

2 B (play)

3 C (stop)

4 A (eject)

5 CH ▲/▼

p.29

p.14

➠

Press to select channels or move up (▲)/down (▼)

through the main menu items.

6 SETUP

7 VOL ▲/▼

p.17

p.15

➠

Press to adjust the volume or move right (▲)/left (▼)

through the main menu items.

8 DVD indicator

Lights up orange when a disc is inserted.

9 STAND BY indicator

Lights up red when the unit goes into standby mode.

10 POWER ON indicator

Lights up green when power is on.

11 Infrared sensor window

Receives infrared rays transmitted from the remote

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Terminals

Side Panel

12 HDMI 2 Input jack

13 S-Video/CompositeVideo/Audio (L/R) Input jacks

p.12, 34

➠

forVIDEO

p.34, 35

➠

14 Headphone Audio Output jack

Headphone connection for personal listening.

TERMINAL

Rear Panel

15 Antenna Input jack

p.12

➠

16 Disc loading slot

17 AC power cord

p.29

HDMI 2

p.12

18 PC (VGA) Input jack

19 HDMI 1 Input jack

p.35

p.12, 34

20 ComponentVideo and Audio (L/R) Input jacks

p.12, 34

➠

21 Digital Audio Output jack

p.35

HEAD PHONE

22 Analog Audio (L/R) Input jack for PC connection

p.35

➠

Mini-plug audio cable connection from PC.

23 Analog Audio (L/R) Input jacks for HDMI 1

p.34

➠

Audio cable connection from a DVI device.

(For HDMI 1 Input jack only)

Note for service terminal

service terminal (service use only)

• Use this terminal only when a software update is necessary.

• User should not connect any devices to the service terminal such

as digital camera, keyboard, mouse, etc. (because these will not

work).

• The software update is, in most cases, handled by an authorized

service person or in some circumstances the user may be asked

to do the software update themselves.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to Cable Receiver or

Satellite Box

PREPARATION

Use an HDMI or component video cables to connect the

HDMI or the ComponentVideo Input jacks of the unit to

the HDMI or the component video output jacks of the cable

receiver/satellite box.

No supplied cables are used with these connections:

• Please purchase the necessary cables at your local store.

If you connect to the unit’s ComponentVideo Input jacks,

connect audio cables to the Audio L/R Input jacks right beside

the ComponentVideo connector.

Before you connect:

Be sure your antenna or other device is connected properly

before plugging in the AC power cord.

component video cables

(red/blue/green) and audio cables

Antenna Connection

Connect the RF coaxial cable on your home outlet to the

(green) (blue) (red)

antenna input jack of this unit.

AUDIO OUT

COMPONENT VIDEO OUT

HDMI OUT

Pb/Cb

Pr/Cr

VHF/UHF

analog

STEREO

PCM

DTV antenna

cable receiver/

satellite box

ANT IN

HDMI cable

RF coaxial cable

satellite dish

RF coaxial cable

cableTV signal

includding PPV

You can also connect this unit to the cable receiver or satellite

box other than the HDMI or the component video output jacks

because they might have different output jacks.

cableTV signal

Required cables and connecting methods of the cable receiver/

satellite box, or the availability channel for the clear QAM may

differ depending on the cable/satellite provider.

Once connections are completed, turn on the unit and begin

initial setup. Channel scanning is necessary for the unit to

memorize all available channels in your area. [Initial Setup]

For more information, please contact your cable/satellite provider.

Note

p.13

➠

• Use an HDMI cable with the HDMI logo (a certiﬁed HDMI cable).

High Speed HDMI cable is recommended for the better

compatibility.

Note

• If you have any question about the DTV’s antenna, visit

www.antennaweb.org for further information.

• Depending on your antenna system, you may need different types

of combiners (mixers) or separators (splitters). Contact your local

electronics store for these items.

• For your safety and to avoid damage to this unit, please unplug the

RF coaxial cable from the antenna input jack before moving the

unit.

• If you did use an antenna to receive analogTV, it should also

work for DTV reception. Outdoor or attic antennas will be more

effective than a set top or inside antenna.

• To switch your reception source easily between antenna and cable,

install an antenna selector.

Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC

outlet after all the necessary connections are made.

Caution:

• Do not connect the AC power cord to a power supply outside

the indicated voltage of this unit (AC 120V).

Connecting the AC power cord to a power supply outside of this

range may result in ﬁre or electrical shocks.

• If you are not receiving a signal from your cable service, contact the

Cable provider.

Note

• Each time you plug in the AC power cord, no operations will be

performed for a few seconds.This is not a malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Use ◄/► to select the desired location setting, then press

ENTER.

These operations are accessible by remote control.

Some may also be accessible by controls on the main unit.

Initial Setup

Select “Retail” or “Home” for your location.

Initial Setup

This section will guide you through the unit’s initial setting

which includes selecting a language for your on-screen menu

and autoprogram, which automatically scans and memorizes

viewable channels.

Home

Retail

Select

ENTER

Enter

Before you begin:

Make sure the unit is connected to antenna or cable.

• Select [Retail] store, the unit will be set up with

predefined setting for retail displays. In this setting, the

power consumption may possibly exceed the limited

requirement of the ENERGY STAR^®qualification.

• Select [Home], the unit is set to maximize the energy

efficiency for home setting and it can be adjusted

through a choice of picture and sound quality according

to your preference.

After making all the necessary connections,

press POWER to turn on the unit.

• It may take a few moments to turn on the unit for the

first time.

• [Initial Setup] menu appears automatically after the

unit is turned on.

• When the initial setup is completed, the lowest

memorized channel with the confirmation message of

the location setting will be displayed on theTV screen.

Use ▲/▼ to select the on-screen language from the

choices (English/Español/Français) on the right side of the

TV screen, then press ENTER.

Note

Use ▲/▼ to select [Antenna] forTV channels or [Cable]

for CATV channels, then press ENTER.

• If you are not receiving a signal from your cable service, contact

the Cable provider.

• If you press POWER or SETUP during autoprogram, this setting

will be canceled.

• The initial autoprogram function can be executed for either

[Antenna] or [Cable] only once.When you change the

Initial Setup

Antenna

Make sure the antenna is connected to ''ANT. IN'' jack.

Cable

Select your signal source.

Skip

connection (Antenna/Cable), set [Autoprogram] again.

• If there is no signal input from the antenna terminal and no

p.19

➠

operation for several seconds after you turn on the unit, helpful

hints appears. Follow the instructions listed on theTV screen.

Antenna

Cable

ANT.IN

Initial Setup

Retry

Later

ENTER

Select

Enter

Back

Skip

No channel is registered.

Try Autoprogram again?

• [Autoprogram] will begin.

Verify that you have a cable connected to the “ANT. IN” jack

on the back of the TV, the channel installation process

searches this connection. If you are using a cable or satellite

box, please confirm the input which you have connected to the

box and press “INPUT SELECT” key on the remote control to

select the appropriate source input.

Initial Setup

Please wait while the system is scanning for channels.

Auto programming may take more than 20 minutes to

complete.

ENTER

Select

Enter

Skip

• You must set [Home] in step 4. Otherwise, [Picture] and [Sound]

settings you adjusted will not be memorized after the unit goes

into standby mode.

Digital channels

Analog channels

0 ch

Skip

After an initial setup is completed...

• If you want to scan the channels automatically again.

[Autoprogram]

p.19

➠

• You can add the desired cable and analog channels

unmemorized by autoprogram.

[Add Channels]

p.20

➠

• If you want to change to another language.

[Language] p.25

➠

• If you want to change the location setting.

[Location] p.24

➠

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHINGTV

SleepTimer

can set the unit to go into standby mode after an incremental period of time.

Press SLEEP repeatedly to change the amount of time (increases

the time by 30 minutes up to 120 minutes).

Sleep

120min.

Press SLEEP once to call up the display for checking the remaining time.

•

To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is

displayed.

Switching Each Input Mode can easily switch with the remote control

betweenTV (ATSC or NTSC) and external devices when they are connected to the unit.

Press INPUT SELECT or CH▲ repeatedly to cycle through the input modes.

Input Select

e.g.)

TTV

eoI1

HDomMI

onent

I1onent

Vi eoI2

11-1

Video

Component

HDMI1

DTV/TV channel

HDMI2

•

Pressing CH▼ reverses the direction of the input modes.

Channel Selection

Select channels by using CH▲/▼ or the Number buttons.

•

To select the memorized channels,

use CH▲/▼ or the Number buttons.

To select the non-memorized channels,

use the Number buttons.

11-1

•

To use the Number buttons

ATSC

When selecting digital channel 11−1

Be sure to press − before entering the subchannel number.

NTSC

When selecting cable or analog channel 11

Press CH RETURN to return to the previously viewed channel.

• [No Signal] will appear on theTV screen after the subchannel

broadcast is over.

Note

• [Audio only program] message will appear on theTV screen, when you

receive only sound signal.

Still Mode can freeze the image shown on theTV screen for 5 minutes.

Press PAUSE F to freeze the image.

Still

•

The sound output will not be paused.

To cancel freeze mode, press any buttons except POWER.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal.And 3 types of display

modes can be selected for PC input signal.

Press SCREEN MODE repeatedly to switch theTV aspect ratio.

Normal displays a 16:9 picture at its original size.

For 16:9 video signal

4:3 displays a 16:9 picture at a 4:3 size; the picture is

shortened horizontally. Sidebars appear on both edges

of the screen.

Movie expand displays a 16:9 picture that is

vertically stretched to ﬁll the screen.This only crops

Movie expand

out the top of the picture.

Normal

4:3

Zoom displays a 16:9 picture at its maximum size

without changing its horizontal and vertical ratio.

Wide displays a horizontally stretched picture.This

crops out the left and right sides of the picture.

Wide

Zoom

Normal displays a 4:3 picture at its original size.

Sidebars appear on both edges of the screen.

For 4:3 video signal

16:9 displays a 4:3 picture at a 16:9 size; the picture is

stretched horizontally to ﬁll the screen.

Movie expand displays a 4:3 picture at a 16:9 size;

the picture is stretched more vertically at the top of

Movie expand

the screen.This crops out the top of the picture.

Normal

16:9

Zoom displays a 4:3 picture at a 16:9 size; at its

maximum size that is more vertically stretched to ﬁll

the screen.This crops out the top and bottom of the

picture.

Wide displays the picture with its center at the

original size and the edges stretched horizontally to ﬁll

the screen.

Wide

Zoom

Normal displays a proportionately stretched picture.

Sidebars appear on both edges of the screen.

For PC input signal

Full displays a picture that is stretched out of

proportion horizontally to ﬁll the screen.

Dot By Dot displays a picture in its original size.

Normal

Full

Dot By Dot

Sound Functions

describe how to change the audio or the audio language as well as the volume.

Volume Adjustment

Use VOL.▲/▼ to adjust the volume.

Volume

Silence Mode

will be displayed for a few seconds when adjusting the volume.

Press MUTE to turn off the sound temporarily.

Mute

will be is displayed for a few seconds.

•

Press MUTE again or VOL.▲/▼ to recover the original

volume.

Switching Audio Mode

ATSC

NTSC

Press AUDIO repeatedly to cycle through the available audio

Press AUDIO to display the currently selected audio mode.

While receiving an MTS broadcast, press repeatedly to cycle

through the available audio channel.

languages.

•

Available languages differ depending on the broadcast.

[Other] is displayed when the audio language cannot be

acquired, or the acquired languages are other than English,

Spanish or French.

SAP / STEREO

e.g.) When all audio are available

11−1

English 1/3

SAP / STEREO

SAP / MONO

SAP / STEREO

STEREO : Outputs stereo-audio

SAP

: Outputs second audio program

MONO : Outputs mono-audio

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Screen Information

You can display the currently selected channel or other

information such as the audio mode on theTV screen.

In the digital mode, the detailed broadcasting information for

the current channel such as program title, program guides are

displayed.

Press INFO.

ATSC

Day of Memories

KABC

11-1

English 1/2

quarter-century ago,which may now qualify as the

good old days of newspapering,run-of-paper sales

accounted for 80 percent of the industry's advertising

revenues.Department stores and supermarket were

1080i HD

16:9

6, 7, 8

Rating

TV: TV-14

NTSC

SAP / STEREO

480i SD 4:3

6, 7, 8

TV-PG DLSV

program title

program guide

(The program guide added to broadcasting

information is displayed to a maximum of 4 lines.)

broadcast station

channel number

audio language (ATSC)/audio mode (NTSC)

[Switching Audio Mode]

effective scanning lines and scan mode

TV format

p.15

➠

program’s image aspect ratio

CC (not available if closed caption is set to [Off])

10 child lock rating

Press INFO or BACK to hide the information.

Note

• When the program guide consists of more than 4 lines, use ▲/▼

to scroll to the next/previous lines.

• [No description provided.] is displayed when the program guide

is not provided.

• While the program guide is displayed, the closed caption function

is interrupted.

• In external input mode, the following screen is displayed;

e.g.) When an external device is connected toVideo Input jack.

Video

480i SD

TV-PG DLSV

• The information display will automatically disappear in 1 minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

USING FUNCTIONS

This section describes the overview of the main menu

displayed when you press SETUP.

The main menu consists of the function setting items below.

Press SETUP to display

the main menu.

Use ▲/▼ to select a desired menu and an item,

then press ENTER to determine the setting.

Picture

Page 18

Picture

Sound

Adjusting the picture mode, or customize the

picture quality as your preference.

Channel

Features

Language

DVD

Sound

Page 18

Adjusting the sound mode, equalizer and some

other sound functions.

Channel

Page 19

Scanning the channels available in your area and

see what the antenna levels are.

Features

Page 20

Adjusting the Closed Caption, parental guide and

some other useful functions.

Language

Page 25

You can choose English, Spanish, or French

as your on-screen language.

DVD

Page 25

You can choose the desired DVD settings.

When the setting is completed, press SETUP to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound

Picture

Sound

Picture

Sound Mode

Equalizer

Standard

TV Speakers

Primary MTS

Ext. Amp

Stereo

Before you begin:

Channel

Features

Language

DVD

You must set [Home] in [Location]. p.24

➠

Otherwise, the settings you adjusted will not be memorized

after the unit goes into standby mode.

Use ▲/▼ to select the item you want to adjust, then press

ENTER.

Adjust the following items.

Picture

Picture Mode

Brightness

Contrast

Personal

Sound Mode

Use ▲/▼ to select the desired setting, then press ENTER.

([Personal], [Standard], [Movie], [Music], and [News])

Sound

Channel

Features

Language

DVD

Color

Tint

Equalizer

Adjust tonal quality for each frequencies.

Sharpness

Color Temperature

Normal

Use ◄/► to select the speciﬁc frequency and use ▲/▼ to

adjust the level, then press ENTER.

Adjust the following items.

TV Speakers

Select the audio output from the unit’s speakers, or not. If your

ampliﬁer is HDMI link function compatible and connected by

an HDMI cable to this unit, some sound operations such as

volume up can be changed by using this unit’s remote control.

Picture Mode

Use ▲/▼ to select the desired setting, then press ENTER.

([Personal], [Standard], [Sports], [Movie], and [Game])

Make sure [fun-Link Control] is set to [On].

p.24

➠

Brightness, Contrast, Color, Tint, Sharpness,

Use ▲/▼ to select the desired option, then press ENTER.

ColorTemperature

You can only adjust the following options when you set to

[Personal] in [Picture Mode].

The sound will be output from the unit’s speakers.

The sound will not be output from the unit’s

speakers.

Off

You can control audio output from your

connected HDMI link devices by using this unit's

remote control.

Use ▲/▼ to select the desired setting, then press ENTER.

Then use ◄/► to adjust the setting.

Ext. Amp

Cursor ◄

Cursor ►

Note

Brightness

Contrast

to decrease brightness to increase brightness

• We do not guarantee 100% interoperability with other brands of

HDMI link compliant devices.

to decrease contrast

to increase contrast

to decrease color

intensity

to increase color

intensity

Color

Primary MTS

You can set the output mode as a default for the sound mode

(NTSC only).

This setting is not interlocked when you change the output

mode by pressing AUDIO. [Sound Functions]

Tint

to add red

to soften

to add green

to sharpen

Sharpness

Color

Temperature

to add warm colors

to add cool colors

p.15

➠

Use ▲/▼ to select the desired option, then press ENTER.

Sound

Stereo

Mono

SAP

Outputs stereo-audio.

Outputs mono-audio.

Before you begin:

Outputs second audio program.

You must set [Home] in [Location]. p.24

➠

Otherwise, the settings you adjusted will not be memorized

after the unit goes into standby mode.

Use ▲/▼ to select the item you want to adjust, then press

ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Note

Channel

• After setting [Autoprogram], using CH ▲/▼ on the remote

control skips unavailable programs automatically.

• If you are not receiving a signal from your cable service, contact

the Cable provider.

• If you press POWER or SETUP during autoprogram, the setting

will be canceled.

Before you begin:

Make sure the unit is connected to antenna or cable.

• Even if [Autoprogram] is completed, the channel setting will be

lost if the AC power cord is unplugged before the unit goes into

standby mode by pressing POWER.

Use ▲/▼ to select the item you want to adjust, then press

ENTER.

• The PIN code will be required once you set a PIN code in the

Channel

Picture

[Child Lock].

p.21

➠

• If you want to change your PIN code, follow the instruction of

[Change PIN].

Autoprogram

p.23

➠

Sound

Channel List

Add Channels

Antenna

Channel

Features

Language

DVD

Channel List

The channels selected here can be skipped when selecting the

channels using CH ▲/▼.

Those channels can still be selected with the Number buttons.

Use ▲/▼ to select [Channel List], then press ENTER.

Use ▲/▼ to select the channel you want to remove, then

press ENTER.

Adjust the following items.

Channel List

Picture

Autoprogram

If you switch wires (e.g. between antenna and CATV) or if you

DTV

6-1

8-1

Sound

move the unit to a different area after the initial setting, or if

you restore the DTV channels you deleted, it is recommended

to use Autoprogram to perform a new channel search.

Highlight channels for

Ch Up / Down key selection.

Channel

Features

Language

DVD

DTV

48-1

Use ▲/▼ to select [Autoprogram], then press ENTER.

67-1

Use ▲/▼ to select an appropriate option, then press

ENTER.

ENTER

Ch Select

Watch/Skip

Back

• The channel display for the removed channel darkens.

You will not be able to select the channel again using

CH ▲/▼.

• To reactivate a removed channel, use ▲/▼ and press

ENTER.The registered channels are highlighted.

• When you remove a main channel, its subchannels are

removed as well.

Autoprogram

Picture

Back

Auto program will rescan all channels.

Auto programming may take more than 20

minutes to complete.

Sound

Antenna

Cable

Select your signal source.

Channel

Features

Language

DVD

Antenna

Note

Cable

ANT.IN

• The channel with the [DTV] indicated on the display is ATSC.

Otherwise the channel is NTSC.

• When connected toVHF/UHF antenna, select [Antenna].

• When connected to CATV, select [Cable].

• [Autoprogram] will begin.

Please wait while the system is scanning for channels.

Auto programming may take more than 20 minutes to

complete.

75%

Digital channels

Analog channels

10 ch

6 ch

Exit

• When the scanning and memorizing are completed, the

lowest memorized channel will be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Add Channels

Features

This function lets you add the channels that were not added

by the autoprogram due to reception conditions at the initial

setting.

Use ▲/▼ to select the item you want to adjust, then press

ENTER.

Use ▲/▼ to select [Add Channels], then press ENTER.

Features

Picture

Use the Number buttons to enter the number of the

channel you want to add, then press ENTER.

Closed Caption

Sound

Child Lock

PC Settings

Channel

Features

Language

DVD

fun-Link (HDMI CEC)

Energy Saving Mode

Location

Add Channels

Picture

Home

Add Channels

Current Software Info

Sound

For analog channels, select a

channel to be added using number

keys.

Channel

For digital channels, you must

perform Autoprogram function.

Adjust the following items.

Features

Language

DVD

Closed Caption

Ch Change

Back

You can view closed captioning (CC) forTV programs,

movies and news. Closed caption refers to text of dialog or

descriptions displayed on-screen.

Note

• If setup completes successfully, [Added to the channel list.] is

displayed.

• If external input is used, it is not possible to register the channel

and [Unavailable] will be displayed on theTV screen.

• By using CH ▲/▼, you can select the memorized channels only.

Use ▲/▼ to select [Closed Caption], then press ENTER.

See the following description for setting each item.

Closed Caption

Picture

Caption Service

Digital Caption Service

Caption Style

Off

Sound

Antenna Conﬁrmation

Channel

Features

Language

DVD

ATSC

This function lets you check the digital signal strength of each

channel.

Use ▲/▼ to select [Antenna], then press ENTER.

Use the Number buttons or CH ▲/▼ to select the

channel for which you want to check the digital signal

strength.

A. Caption Service

Use ▲/▼ to select [Caption Service], then press ENTER.

11-1

Use ▲/▼ to select the desired closed caption, then press

ENTER.

Antenna

Off

Select if you do not want caption service.

Picture

Sound

Back

The primary caption and text services.The

captioning or text is displayed in the same language

CC-1 andT-1 as the program’s dialog (up to 4 lines of script on the

TV screen, where it does not obstruct relevant parts

of the picture).

Channel

Features

Language

DVD

Current 50 Max

Serve as the preferred data channels.

CC-3 andT-3 The captioning or text is often a secondary

language.

Ch Change

Rarely available and broadcasters use them only in

CC-2, CC-4,

special conditions, such as when [CC-1] and [CC-3]

T-2 andT-4

or [T-1] and [T-3] are not available.

Note

• If the channel is set to analog (cable) channel or external input,

you cannot conﬁrm the antenna condition.

• There are 3 display modes according to programs:

Paint-on

mode

Displays input characters on theTV screen

immediately.

Once characters are stored in memory, they are

displayed all at once.

Pop-on mode

Displays the characters continuously by scrolling

(max. 4 lines).

Roll-up mode

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Background

Color

B. Digital Captiioon SSeerrvice

ATSC

Background color and opacity of the

displayed caption can be switched.

Background

Opacity

In addition to the basic closed caption, DTV has its own closed

caption called digital caption service. Use this menu to change

the settings for digital caption service.

Edge Color

EdgeType

Edge color and type of the displayed

caption can be switched.

Edge

Note

Use ▲/▼ to select [Digital Caption Service], then press

ENTER.

• Closed caption will not be displayed when you are using an HDMI

connection.

• To show the closed caption on yourTV screen, broadcast signal

must contain the closed caption data.

• Not allTV programs and commercials have the closed caption or

all types of the closed caption.

• Captions and texts may not exactly match theTV voice.

• Changing channels may delay the closed caption for a few seconds.

• Adjusting or muting the volume may delay the closed caption for

a few seconds.

Use ▲/▼ to select the desired digital caption service, then

press ENTER.

Select if you do not want digital caption

service.

Off

Select one of these before changing any

other item in [Closed Caption] menu.

Choose [CS-1] under normal circumstances.

CS-1 to CS-6

• Abbreviations, symbols and other grammatical shortcuts may be

used in order to keep pace with the on-screen action.This is not

a malfunction.

• The caption or text characters will not be displayed while the

main menu or functions display is shown.

• If a black box appears on theTV screen, this means that the closed

caption is set to the text mode.To clear the box, select [CC-1],

[CC-2], [CC-3], [CC-4] or [Off].

Note

• [Digital Caption Service] that you can switch differs depending on

the broadcast description.

• If the unit receives poor quality television signals, the captions may

contain errors, or there might be no captions at all. Some possible

causes of poor quality signals are:

C. Caption Style

ATSC

- Automobile ignition noise

- Electric motor noise

- Weak signal reception

You can change the caption style such as font, color or size,

etc.

- Multiplex signal reception (ghosts or screen ﬂutter)

- Data dropout and Pixelation (for DTV only)

• The unit retains the closed caption setting if the power fails.

• When the unit receives special effects playback signal (e.g. Search,

Slow and Still) from aVCR’s video output channel (ch3 or ch4),

the unit may not display the correct caption or text.

Use ▲/▼ to select [Caption Style], then press ENTER.

Use ▲/▼ to select [User Setting], then press ENTER.

Use ▲/▼ to select [On], then press ENTER.

Child Lock

Use ▲/▼ to select an item, then press ENTER. Then use

▲/▼ to select the desired setting and press ENTER.

Child lock reads the ratings for programs, then denies access

to the programs which exceed the rating level you set.With

this function, you can block certain programs inappropriate

for children and any channels or external input modes can be

invisible.

Picture display

So, you must bee Philip. Hi!

I’m pleaseed to meet you.

Use ▲/▼ to select [Child Lock], then press ENTER.

Edge

Features

Picture

(Edge Color and EdgeType)

Font

Closed Caption

(Font Style, Font Size, Font Color and Font Opacity or

Transparency)

Sound

Child Lock

PC Settings

Channel

Features

Language

DVD

Background

fun-Link (HDMI CEC)

Energy Saving Mode

Location

(Background Color and Backgroouunndd OOppaacciittyy oorr

Transparency)

Home

Current Software Info

• Review your setting choice made below by looking in

the upper right corner of the displayed setting box (not

all selections show the differences selected).

Font Style

Use the Number buttons to enter the 4-digit number for

your PIN code.

Font Size

Closed captioning font style, size,

color and opacity can be changed.

Font

Font Color

Channel

Features

Enter PIN.

- - - -

Font

Opacity

Download from Www.Somanuals.com. All Manuals Search And Download.

• When you have not set up your PIN code,

Use ▲/▼ to select the desired rating, then press ENTER

repeatedly to switch between [View] and [Block].

enter 0, 0, 0, 0.

• When the PIN code is correct, [Child Lock] menu is

displayed.

See the following description for setting each item.

US Movie Ratings Lock

Picture

Sound

Child Lock

Picture

NC-17

Channel Lock

Channel

PG-13

Sound

US Movie Ratings Lock

US TV Ratings Lock

Canadian English Rating

Canadian French Rating

Region Ratings Lock

Clear Region Ratings Lock

Change PIN

Features

Language

DVD

Channel

Features

Language

DVD

ENTER

Select

View/Block

Back

Rating

Category

Rating

TV-Y7

Channel

Vertical Position

Clock

FantasyViolence

Features

Language

DVD

Violence

Phase

TV-MA

TV-14

TV-PG

Sexual Situation

Coarse Language

Suggestive Dialog

TV-14,TV-PG

Adjust the following items.

Note

• Blocked sub rating will appear beside the main rating category in

[USTV Ratings Lock] menu.

• You cannot block a sub rating (D, L, S orV) if the main rating is set

to [View].

• Changing the category to [Block] or [View] automatically changes

all its sub ratings to the same ([Block] or [View]).

Auto Adjustment

Use ▲/▼ to select [Adjust], then press ENTER.

Auto Adjustment

Picture

Cancel

Adjust

Sound

To automatically synchronize

the phase and clock

on the TV and PC.

D. Change PIN

Although the default PIN code (0000) is supplied with the unit,

you can set your own PIN code.

Channel

Features

Language

DVD

Use ▲/▼ to select [Change PIN], then press ENTER.

Press the Number buttons to enter the new 4-digit PIN

code.

• The horizontal/vertical position, clock and phase of the

PC screen are automatically adjusted.

• Enter PIN code again in [Confirm PIN.] entry field.

Horizontal Position,Vertical Position

Use ◄/► to adjust.

Change PIN

Picture

Sound

Cursor ◄

Cursor ►

Enter PIN.

- - - -

Channel

Horizontal

Position

to move PC screen left to move PC screen right

Confirm PIN.

- - - -

Features

to move PC screen

to move PC screen up

down

Vertical

Position

Language

DVD

PIN Code

Back

Clock, Phase

Use ◄/► to adjust [Clock] setting to stabilize

the PC screen and [Phase] setting to improve the clarity

of the PC screen.

Note

• Make sure new PIN code and conﬁrm PIN code must be exactly

the same. If they are different, the space is cleared for reentering.

• Your PIN code will be erased and returns to the default PIN code

(0000) when a power failure occurs.

• If you forget the PIN code, unplug the AC power cord then wait

for 10 seconds to plug the AC power cord in again.

Cursor ◄

Cursor ►

Clock

Phase

to decrease setting

value

to increase setting

value

The unit will restore the PIN code to 0000 as the factory default.

Note

• You may not obtain an appropriate screen with

[Auto Adjustment] for some signals. In this case, adjust the settings

manually.

• Adjust [Phase] setting after [Clock] setting has been properly

adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Device List

fun-Link (HDMI CEC)

This function lets you see the product model number or name

of connected devices.

This function allows you to operate the linked functions

between our brand devices with a fun-Link feature and this

unit connecting through an HDMI cable.

Use ▲/▼ to select the desired HDMI device listed on theTV

screen, then press ENTER.

Use ▲/▼ to select [fun-Link (HDMI CEC)], then press

ENTER.

Device List

Picture

HDMI1

HDMI2

NB530MGX

fun-Link (HDMI CEC)

Picture

Sound

MBP1100 / F7

fun-Link Control

Auto Device Off

Auto TV On

Channel

Features

Language

DVD

Sound

Channel

Features

Language

DVD

Device List

ENTER

Select

Input Change

Back

Energy Saving Mode

You can set whether the power consumption is saved or not.

Use ▲/▼ to select the desired setting, then press ENTER.

Adjust the following items.

Use ▲/▼ to select [Energy Saving Mode], then press

ENTER.

fun-Link Control

Set the fun-Link [On] or [Off].

The following additional settings will be grayed out when you

set to [Off].

Use ▲/▼ to select the desired mode, then press ENTER.

Reduces the power consumption.

The power consumption may possibly exceed

the limited requirement of the ENERGY STAR^®

qualification.

Use ▲/▼ to select the desired setting, then press ENTER.

Off

Selects if you have connected an external device

that is compatible with the fun-Link function.

Note

Off

Disables all fun-Link.

• You must set [Home] in [Location]. p.24

➠

Otherwise, the settings you adjusted will not be memorized after

the unit goes into standby mode.

Auto Device Off

You can set your device to turn off by interlocking from this

unit’s power.

Location

Use ▲/▼ to select the desired setting, then press ENTER.

When you select [Retail] store, the power consumption may

possibly exceed the limited requirement of the

ENERGY STAR^®qualiﬁcation.

Your connected fun-Link device turns off

automatically when the unit goes into standby

mode.

Your connected fun-Link device stays on even if

the unit goes into standby mode.

Off

Use ▲/▼ to select [Location], then press ENTER.

AutoTV On

Use ▲/▼ to select the desired location, then press

ENTER.

This unit will turn on detected when the power on signal is

sent from your connected fun-Link device.

The unit will be set up with predefined setting

for retail displays. In this setting, the power

Retail

Use ▲/▼ to select the desired setting, then press ENTER.

consumption may possibly exceed the limited

requirement of the ENERGY STAR^®qualification.

This unit turns on automatically when you turn on

your connected fun-Link device.

The unit is set to maximize the energy efficiency

for home setting and it can be adjusted through a

choice of picture and sound quality according to

your preference.

This unit stays the standby mode even if you turn

on your connected fun-Link device.

Home

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Current Software Info

This function shows what version of the software currently

DVD

used.

Settings are only effective when the unit is in DVD mode

and any discs should not be played back.

Use ▲/▼ to select [Current Software Info], then press

ENTER.

Use ◄/►to select a desired setting and an item, then press

ENTER to determine the setting.

Conﬁrm the version of the software currently used.

Current Software Info

Picture

Back

Sound

Release Version:

LANGUAGE

Channel

Features

Language

DVD

XXXXXXX_XXX_X_XXXX

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER/OK

Language

When the setting is completed, press SETUP to exit.

Use ▲/▼ to select [English], [Español] or [Français], then

press ENTER.

DVD Language Setting

You can change the desired language when playing back the disc.

Language

Picture

Select the language for setup display.

English

Español

Use ▲/▼ to select the item you want to adjust, then press

ENTER.

Sound

Channel

Features

Language

DVD

Elija el idioma de ajuste.

Adjust the following items.

Français

(Default: ORIGINAL)

(Default: OFF)

AUDIO *1, *2

Select the desired audio language.

Sélectionner langue écran config.

SUBTITLE *1, *2

Select the desired subtitle language.

Note

(Default: ENGLISH)

DISC MENU *1

• If you need the English menus instead of the Spanish or French

menus, press SETUP. Use ▲/▼ to select [Idioma] or [Langue],

then press ENTER.

Use ▲/▼ to select [English], then press ENTER.

Press SETUP to exit the main menu.

Select the desired language in DVD menu.

Note

• To change the on-screen language, call up [Language] from the

main menu and set the desired language. [Language]

p.25

➠

• Language options are not available with some discs.

• If [OTHER] is selected in [AUDIO], [SUBTITLE] or

[DISC MENU] menu, press 4-digit number to enter the code for

the desired language. [Language Code List]. p.27

➠

• Only the languages supported by the disc can be selected.

• Language setting for Audio and Subtitle are not available with

some discs.

Use MODE to select subtitles available on the DVD.

Use AUDIO to select audio available on the DVD.

• If the DVD’s default settings for audio and subtitle are the same

language, the subtitles may not show unless you turn them on.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Audio Setting

Choose the appropriate audio settings for your equipment. It only

affects during the playback of DVD.

Parental Setting

Parental setting prevents your children from viewing inappropriate

materials. (password protected.) Playback will stop if the ratings

exceed the levels you set.

Use ▲/▼ to select the desired item, then press ENTER.

Use the Number buttons to enter the 4-digit password for

your password, then press ENTER.

AUDIO

PARENTAL

DRC

DOWN SAMPLING ON

DOLBY DIGITAL BITSTREAM

PASSWORD

Please enter a 4-digit password.

ENTER/OK

Adjust the following items.

• If you have set password already, use

the Number buttons to enter the current 4-digit

password.

• You cannot use the default password (4737) to play

back a DVD.

(Default: ON)

DRC (dynamic range control)

This function is available only on the discs which are recorded

in the Dolby Digital format.

Compress the range between soft and loud

sounds.

Use ▲/▼ to select the [PARENTAL LEVEL], then press

ENTER.

OFF

No effects (original sound).

Use ▲/▼ to select the desired item, then press ENTER.

(Default: ON)

DOWN SAMPLING

This function is available only on digital outputting of a disc

recorded in 96kHz.

PARENTAL LEVEL

ALL

All parental locks are cancelled.

When outputting in 48kHz.

All ratings (adult/general/children) can be

played back.

8 [ADULT]

OFF

When outputting the original sound.

Only DVD intended for general use and

children can be played back.

7 [NC-17]-2 [G]

1 [KID SAFE]

Note

• When playing back a 96 kHz disc with the copyright protection

or when [Virtual Surround] is set to [1] or [2], the sound will be

down sampled at 48 kHz even if the [DOWN SAMPLING] is set

Only DVD intended for children can be played

back.

To change the password

to [OFF]. [Virtual Surround].

p.33

➠

At step 2, use ▲/▼ to select [PASSWORD CHANGE]

then press ENTER.

(Default: BITSTREAM)

Set to [BITSTREAM] when this unit is connected to a Dolby

DOLBY DIGITAL

Use the Number buttons to enter the new 4-digit

password.

Digital decoder.

BITSTREAM Outputs Dolby Digital signals.

Note

• DVD-video may not respond to parental lock settings. Make sure

this function works with your DVD-video.

PCM

Converts the Dolby Digital into PCM. (2 channel)

• Record the password in case you forget it.

• If you forget the password, press 4, 7, 3, 7, then enter your new

password. Password will be cleared and parental levels will be set

to [ALL].

• A power failure will not erase your password.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Language Code List

Others

You can change the other functions.

Language

Code

Language

Code

Lithuanian

Macedonian

Malagasy

Malay

5866

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

A-B

Use ▲/▼ to select the desired item, then press ENTER.

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Malayalam

Maltese

Maori

Marathi

OTHERS

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

ANGLE ICON

STILL MODE

AUTO

Nepali

AUTO POWER OFF ON

Norwegian [NOR]

O-R

Basque

ENTER/OK

Bengali;Bangla

Bhutani

Occitan

Oriya

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

Bihari

Bislama

Oromo(Afan)

Panjabi

Breton

Bulgarian

Burmese

Byelorussian

Pashto;Pushto

Persian

Adjust the following items.

Polish [POL]

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

C-E

(Default: ON)

ANGLE ICON

Set to [ON] to show the angle icon when multiple camera

angles are available during DVD playback.

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

Chinese [CHI]

Corsican

Croatian

Czech [CZE]

(Default:AUTO)

STILL MODE

Set the picture quality in the still mode.

If you select [AUTO], it automatically selects the best

resolution setting ([FRAME] or [FIELD]) based on the date

characteristics of the pictures.

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Serbo-Croatian

Sesotho

Setswana

Shona

F-H

FIELD

Faroese

Fiji

5261

5256

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

The picture in the still mode will be stabilized.

FRAME

The picture in the still mode will be highly defined.

Sindhi

Finnish [FIN]

French [FRE]

Frisian

Singhalese

Siswat

(Default: ON)

Slovak

Galician

AUTO POWER OFF

Set to [ON] if there is no operation for 20 minutes, the unit

goes into standby mode.

Slovenian

Somali

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Spanish [SPA]

Sundanese

Swahili

Swedish [SWE]

Gujarati

Hausa

Reset to the Default Setting

You can reset all the settings except for the parental setting and

on-screen menu language.

Hebrew

Tagalog

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Hindi

Tajik

Hungarian [HUN]

I-K

Tamil

Tatar

Telugu

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Use ▲/▼ to select [YES], then press ENTER.

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Turkish [TUR]

Turkmen

Twi

INITIALIZE

Kannada

U-Z

Initialize?

YES

Kashmiri

Ukrainian

Urdu

Uzbek

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Kazakh

Kinyarwanda

Kirghiz

ENTER/OK

Vietnamese

Volapuk

Welsh

Kirundi

Korean [KOR]

Kurdish

Wolof

Xhosa

L-N

Yiddish

Laothian

Latin

Latvian;Lettish

Lingala

5861

5847

5868

5860

Note

Yoruba

Zulu

• When you want to cancel the initialization, select [NO], then press

ENTER.

Note

• If you choose a language that has a 3-letter abbreviation, the code

will be displayed every time you change the audio or subtitle

language setting above. If you choose any other language, [---] will

be displayed instead. (3-letter abbreviation is written in bracket.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Unplayable Media

NEVER play back the following discs. Otherwise, malfunction

may result!

OPERATING DVD

•

3 inches (8 cm) disc

DVD-RAM

DVD-audio

CD-i

Photo CD

Video CD

DVD with region codes other than 1 or ALL

DTS-CD

DVD-ROM for personal computers

CD-ROM for personal computers

The discs with labels, scratches, stains, blemishes, etc.

HD DVD

Blu-ray Disc

DVD or CD contains MP3/JPEG ﬁles

KODAK Picture CD

Playable Media

Recorded

MediaType

Logo

Media Size

Signal

DVD-VIDEO

digital video

(MPEG2)

DVD-RW

On the following disc, the sound MAY NOT be heard.

Super audio CD

•

DVD-R

CD-DA

5 inches

(12 cm)

Any other discs without compatibility indications

Note

• Unﬁnalized discs cannot be played back.

• For DVD-RW/-R, discs recorded in theVR (video recording)

format cannot be played back. Only the ﬁnalized video format

discs can be played back.

• Some discs cannot be played back because of incompatible

recording conditions, characteristics of the recorder or special

properties of discs.

• Only the sound recorded on the normal CD layer can be

delivered.The sound recorded on the high density super audio

CD layer cannot be delivered.

• Do not use a single CD adaptor which makes 3 inches (8 cm) to

5 inches (12 cm) disc.

• You can play back discs with the marks listed in [Playable Media].

If you use non-standardized discs, this unit may not play them back

or the sound and video quality will be compromised.

• If the recorded portion of the disc is too small (less than 2.17

inches (55 mm) across), it may not play back properly.

CD-RW

CD-R

digital audio

Region Codes

This unit has been designed to play back DVD with

region 1. DVD must be labeled for ALL regions or

for region 1 in order to play back on the unit.You

cannot play back DVD that are labeled for other

regions. Look for the symbols on your DVD. If these

region symbols are not on your DVD, you cannot

play back the DVD in this unit.

The number inside the globe refers to region of the world.

A DVD labeled for a speciﬁc region can only be played back

on the unit with the same region code.

Color Systems

DVD is recorded in different color systems throughout the

world.The most common color system is NTSC (which is used

primarily in the United States and Canada).

This unit uses NTSC, so DVD you play back must be recorded

in the NTSC system.You cannot play back DVD recorded in

PAL color systems.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

To display the DVD menu, press DISC MENU and use

▲/▼/◄/► to select an item, then press ENTER (or

PLAY B).

These operations are accessible by remote control. Some

may also be accessible by controls on the main unit.

To display the top menu, press TITLE and use

▲/▼/◄/► to select an item, then press ENTER (or

PLAY B).

Playback

Note

• Menu operations may vary depending on the disc.

Refer to the manual accompanying the disc for more details.

Before you begin:

Turn on the ampliﬁer and any other equipment which is

connected to this unit. Make sure the external audio receiver (not

included) are set to the correct channel.

Resume Playback

Press STOP C during playback. Resume message will appear

on theTV screen.

Press POWER to turn on the unit.

Insert a disc with label facing forward.

Press PLAY B. Playback will resume from the point at which

playback was stopped.

label

Note

CAUTION

•

To cancel resume, press STOP C one more time in the stop mode.

On some discs, STOP C will not work while the resume message

appears. Please wait until the message disappears.

• Do not put coins or

foreign objects into

the disc loading slot.

•

The resume information will be kept even when the unit goes

into standby mode. However, ejecting the disc will cancel the

resume feature. Playback will start at the beginning the next time

you insert the disc.

• In case the DVD was recorded on both sides, make

sure the label of the side you want to play back is facing

forward.

The unit switches to the DVD mode when the unit was in

TV mode and detects the type of disc.

• Press PLAY B if the unit does not go to the DVD mode.

Paused and Step-by-step Playback

The unit starts playback.

• If playback does not start automatically, press PLAY B

again.

Press PAUSE F during playback.

• Playback will be paused and sound will be muted.

Press STOP C to stop playback temporarily.

• If playback remains stopped for 20 minutes, the unit will

go into standby mode automatically when

[AUTO POWER OFF] is set to [ON].

DVD

Each time you press PAUSE F in the pause mode, the disc

goes forward one frame at a time.

To continue playback, press PLAY B.

Press A JECT to eject the disc.

Note

• [

operation is prohibited by the disc or this unit.

• Some DVD may start playback from title 2 or 3 due to speciﬁc

programs.

Note

] may appear at the top-right on theTV screen when the

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

in the pause mode are blurred.

p.27

➠

• During the playback of a 2-layered disc, pictures may stop for a

moment.This happens while the 1st layer is being switched to the

2nd layer.This is not a malfunction.

• When you cannot remove the disc, you may try either following

operations.

Fast Forward/Fast Reverse

- Press and hold A EJECT on the unit for more than 5 seconds.

- Unplug the AC power cord and plug it in again, then press

A EJECT.

Press FWD D or REV E repeatedly during playback to

select the desired forward or reverse speed.

It will take about 10 seconds to eject the disc, while that the unit

will not respond to any key commands.

To continue playback, press PLAY B.

Note

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

in the fast playback mode are blurred.

p.27

➠

Disc Menu

• Fast forward/fast reverse speed varies with disc.Approximate

speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and

1(2x), 2(8x) and 3(30x) on audio CD.

• For DVD, sound will be muted during this function.

• For audio CD, sound will be intermittent during the search.

DVD

Some discs contain disc menus which describe the contents of

the disc or allow you to customize disc playback, or title menu

which lists the titles available on the DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback will start automatically from the chapter, title or

track you selected.

Slow Forward/Slow Reverse

DVD

Note

• Chapter, title or track search can only be performed during

playback or when the unit has kept the resume information. It

cannot be performed in the stop mode.

• The total number of chapters/titles/tracks in your disc; with

less than 10 chapters/titles/tracks, press the chapter/title/track

number directly.To play a double-digit chapter/title/track, press

the chapter/title/track number.

Press FWD D or REV E repeatedly during the paused

mode to select the desired forward or reverse speed.

To continue playback, press PLAY B.

Note

• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures

in the slow playback mode are blurred.

• Slow forward/slow reverse speed varies with disc.Approximate

speed is 1(1/16x), 2(1/8x) and 3(1/2x).

p.27

• Track search is not available for programmed or random playback.

➠

Using SKIP H/G

• The sound will be muted during this function.

During playback, press SKIP H/G repeatedly until a

desired chapter, title or track will be selected.

Zoom

current chapter/track

(CH) (TR)

current title

(TT)

DVD

CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4

TT 1 TT 2 TT 3 TT 4

[SKIP H]

[SKIP G]

[SKIP H]

[SKIP G]

The zoom function allows you to enlarge the video image and

to pan through the enlarged image.

Playback will start automatically from the chapter, title or

track you selected.

During playback, press MODE repeatedly until

] appears.

• The picture becomes twice as large.

Note

[

• SKIP H/G are not available when playback is stopped.

Press ENTER repeatedly to change the zoom factor, [2x]

or [4x].

Time Search

You can select the desired time which the disc is played back

from.

Once a desired zoom factor is set, use ▲/▼/◄/► to slide

the zoomed picture across theTV screen.

To exit zoom, repeat steps 1 to 2 above and press ENTER

repeatedly until [OFF] appears.

During playback, press MODE repeatedly until

]/[ ] appears.

[

Note

• The gray box with an inner blue box that shows during zoomed

playback is the position guide indicates the position of the zoomed

image within the overall image.

Position guide stays on theTV screen until you press ENTER.

Press ENTER one more time to recall the position guide when

disappears.

• Zoom function does not work while the disc menu is displayed.

• 4x zoom is not available on some discs.

• Zoom function is also available during pause mode.

Use ▲/▼ repeatedly until [

] appears.

Press the Number buttons to select your desired time

lapse within 60 seconds.

Note

Playback will start automatically from the time you selected.

• When there is no need to enter a number, [0] appears

automatically. For example, [0: 0_: _ _] appears in the time search

menu if the total time of the title or track is less than 10 minutes.

• Press CLEAR to erase the incorrect input at step 3.

• Time search can only be performed during playback or when the

unit has kept the resume information.

Search Functions

It cannot be performed in the stop mode.

Chapter/Title /Track Search

You can select chapters, titles or tracks on the disc.

Direct Search

Press the Number buttons to select your desired chapter, title

or track.

During playback, press MODE repeatedly until

]/[ ] appears.

• If you want to perform the title search, use

▲/▼ repeatedly until [ ] appears.

[

Note

• To select a single-digit chapter, title or track number, press the

number directly.

• To select double digit chapter, title or track number:

- If the disc contains more than 9 and less than 100 chapter, title

or track, press +10 ﬁrst, then enter the double digit chapter, title

or track number.

Press the Number buttons to select your desired chapter,

title or track within 60 seconds.

To play back a single-digit chapter, title or track when

there are more than 10 chapters, titles or tracks, press

ENTER after entering the chapter, title or track number.

(e.g., for track 26, press +10, 2 and 6)

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Press PLAY B to start random playback.

Repeat Playback

Note

Repeat function is available only during playback.

• To repeat the current track in the random mode, follow the steps

1 and 2 in [Repeat Playback] and select [ TRACK]. p.31

• To repeat the entire random selections, follow the steps 1 and 2 in

[Repeat Playback] and select [ ALL]. p.31

➠

During playback, press MODE repeatedly until [

appears.

]

➠

Press ▲/▼ to change the repeat mode.

DVD

Programmed Playback

OFF

repeat off

CHAPTER

TITLE

current chapter repeat

current title repeat

You may determine the order in which tracks will play back.

In stop mode, press MODE repeatedly until [PROGRAM]

menu appears.

OFF

repeat off

TRACK

ALL

current track repeat

entire disc repeat

Use ▲/▼ to select a desired track, then press ENTER to

store.

• Additional tracks may be on other screens. Use ▲/▼

to go on to the next/previous pages.

Press BACK to exit.

• Repeat this step until you have selected all the tracks

you wish to play back in the program.

• Up to 99 tracks can be ordered.

• If 8 or more tracks were in a program, use

SKIP H/G to see all the tracks.

Repeat A-B Playback

You can repeat playback between A and B on a disc.

Note

Press PLAY B to start programmed playback.

During playback, press MODE repeatedly until

[

] appears.

• Press CLEAR to erase the last track in the program if you make

an error.

• To erase all programmed tracks at once, select [ALL CLEAR] and

Press ENTER at your desired starting point (A).

Press ENTER at your desired ending point (B).

• Point B should be in the same title or track as point A.

• Within a few seconds, the section A-B will begin to play

back repeatedly.

press ENTER at step 2.

• While a program is being played back, STOP C works as follows:

- Pressing STOP C once:The track will be in the resume standby

mode. Next time you press PLAY B, the playback will resume

from the point where it is stopped in the programmed playback.

To cancel repeat A-B playback, press MODE repeatedly

- Pressing STOP C twice: Resume mode will be canceled. Next

time you press PLAY B, playback will restart from the ﬁrst track

in the original order. However, your programmed playback can

be restarted when you follow the above steps. (Your programs

are still stored until either the disc is ejected or the unit goes into

standby mode.)

until [

] appears.

Press ENTER so [OFF] appears.

Note

• Repeat setting (except [ALL]) will be cleared when moving to

another title or chapter, track.

- On some discs, STOP C will not work while the resume message

appears. Please wait until the message disappears.

• During programmed playback, repeat setting will be effective for

the tracks in the program.

• Repeat playback or repeat A-B playback may not available with

some discs.

• Repeat A-B playback does not function during other repeat mode.

• To cancel point A, press CLEAR at step 2 in

[Repeat A-B Playback].

• To repeat the current track in the program, follow the steps 1 and

2 in [Repeat Playback] and select [TRACK].

p.31

➠

• To repeat the entire program, follow the steps 1 and 2 in [Repeat

Playback] and select [ALL]. p.31

➠

• Ejecting the disc or the unit goes into standby mode will erase the

program.

• You cannot use the Number buttons to select another track

during programmed playback. Use SKIP H/G to select other

tracks in the program.

• Stopping playback will cancel repeat A-B playback.

• You cannot combine random playback with programmed playback.

• You cannot alter a programmed order during playback.

• You can start programmed playback only while in [PROGRAM]

menu.

Random Playback

This function shufﬂes the playing order of tracks instead of

playback in the sequence.

In stop mode, press MODE repeatedly until [RANDOM]

menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-screen Display

Special Settings

Subtitle Language

DVD

You can check the information about the current disc by

pressing INFO on the remote control.

This unit allows you to select a subtitle language (if available)

during DVD playback.

remaining time of the current

chapter

DVD

appears only when multi-

angle is available on the DVD

current playback status

During playback, press MODE repeatedly until

] appears.

[

11/16 0:00:00 - 0:03:30

Use ▲/▼ repeatedly until your desired language appears.

elapsed time of the current

chapter

(

)

1.ENG / 6 SUBTITLE

CH (Chapter):

current chapter number /

total chapters

subtitles can be varied on the

displayed number

current subtitles language

1/3 0:00:00 - 1:23:45

Each time you press ▲/▼, the subtitle language changes

as follows.

remaining time of the current title

elapsed time of the current title

OFF

ENG

SPA

no subtitles

TT (Title):

current title number/total titles

layer number, appears only when

playing a 2-layered disc

English audio

Spanish audio

L0 : Layer 0 is playing

L1 : Layer 1 is playing

Press BACK to exit.

current repeat setting appears only

when the repeat setting is active

C : Chapter repeat

Note

• To cancel the subtitle, select [OFF] at step 2.

• If your language is not shown after pressing

▲/▼ several times, the disc may not have that language. However,

some discs allow you to change subtitle languages setting in the

disc menu. (Operation varies depending on the disc, so refer to

the manual along with the disc.)

T : Title repeat

B : A-B repeat

bit rate indication for the amount

of audio and video data currently

being read

• When [NOT AVAILABLE] appears on theTV screen, it means no

subtitle is recorded on the scene.

• If you choose a language that has 3-letter-language code, the code

will be displayed every time you change the subtitle language

setting. If you choose any other languages, [---] will be displayed

elapsed time of the current track

remaining time of the current

track

instead.

p.27

➠

• Ejecting the disc will cancel your subtitle setting.

current playback status

4/12 0:03:21 - 0:02:15

Audio Language

DVD

TR (Track):

current track number/total tracks

ALL:

This unit allows you to select an audio language (if multiple

languages are available) during DVD playback.

current track number/total tracks

4/12 0:13:45 - 0:45:40

current repeat setting appears

only when the repeat setting is

active

T : Track repeat

A : All tracks repeat

During playback, press AUDIO repeatedly until the

desired language appears.

B : A-B repeat

1.ENG Dolby D 3/2.1ch 48k/3

remaining time of the entire disc

elapsed time of the entire disc

audio can be varied on the

displayed number

current audio language

Each time you press AUDIO, the audio language changes

as follows.

Note

• When you are playing back an audio CD in program or random

ENG

SPA

FRE

English audio

Spanish audio

French audio

mode, [

PROGRAM] (or [

RANDOM]) will be displayed

instead of

Download from Www.Somanuals.com. All Manuals Search And Download.

English

STEREO

L-ch

Stereo sound with left and right channels.

Left channel sound only.

Note

• Some discs will only allow you to change the audio setting from

the disc menu. Refer to the manual accompanying the discs for

details.

R-ch

Right channel sound only.

• If your language is not shown after pressing AUDIO several times,

the disc may not have that language.

Note

• Virtual surround cannot be changed when the sound mode is set

to either [L-ch] or [R-ch].

However, some discs allow you to change multiple audio languages

setting in the disc menu. (Operation varies depending on the disc,

so refer to the manual along with the disc.)

• When [NOT AVAILABLE] appears on theTV screen, it means

audio language is not available.

Virtuaal Surround

You can enjoy virtual surround on your 2 channel stereo

system.

Camera Angles

DVD

During playback, press MODE repeatedly until [

appears.

]

Some DVD may contain scenes which have been shot

simultaneously from various angles.You can change the camera

angle if [ ] appears on the screen. If [ANGLE ICON] is set

Press ▲/▼ to select the sound level.

to [OFF] in [OTHERS] menu, [ ] will not appear.

p.27.

Natural effect.

➠

Emphasized effect.

During playback, press MODE repeatedly until [

appears.

]

OFF

No effects (original sound).

Press BACK to exit.

Use ▲/▼ repeatedly until your desired camera angle

appears.

Note

• The setting will be kept even if the unit is turned off.

• For audio CD, virtual surround will not be effective if the sound

mode is set to something other than [STEREO].

(

)

1 / 8 ANGLE

angles can be varied on the

displayed number

[Stereo Sound Mode].

• Turn down the level or select [OFF] if the sound is distorted.

p.33

➠

Press BACK to exit.

Marker Setup

Black Level Setttiinngg

This feature allows you to assign a speciﬁc point on a disc to

DVD

be called back later.

Adjust the black level to make the dark areas of theTV picture

brighter.

To set a marker

During playback, press MODE repeatedly until

]/[ ] appears.

[

During playback, press MODE repeatedly until [

appears.

]

Use ▲/▼ repeatedly until marker search menu appears.

Press ▲/▼ to adjust the black level.

Use ◄/► to select an available marker within 60 seconds.

Makes the dark areas brighter.

When the playback reaches the point at which you want to

set a marker, press ENTER.

OFF

Shows the original picture as recorded.

• Marker is now set.

Note

Press BACK to exit.

To return to the marker later

• The setting will be kept even if the unit goes into standby mode.

Repeat steps 1-2 in [To set a marker]. Use ◄/► to select

the desired marker.

Stereo Sound Mode

Press ENTER at the desired marker to restart playback

from the speciﬁc point which you set.

This unit allows you to select a sound mode during CD

playback.

Note

• Marker search menu will disappear in about 60 seconds when

there is no input.

• You can mark up to 10 points.

• To clear a marker, select the marker to be cleared, and then press

CLEAR.

• Ejecting the disc or turning off the power will erase all markers.

During playback, press AUDIO repeatedly until the

desired sound mode appears.

Each time you press AUDIO, the sound mode changes as

follows.

• Selecting [

] at step 3 in the section [To set a marker] will

also erase all markers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

CONNECTING DEVICES

• Use an HDMI cable with the HDMI logo (a certiﬁed HDMI cable).

High Speed HDMI cable is recommended for the better

compatibility.

For HDMI connection (use HDMI 1 or 2 jack)

• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/60 Hz of

video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select "PCM" for the digital audio of the device you

connected or check the HDMI audio setting.There may be no

audio output if you select "Bitstream", etc.

No supplied cables are used with these connections:

• Please purchase the necessary cables at your local store.

Before you connect:

Be sure other device is connected properly before plugging in

the AC power cord.

• This unit accepts only signals in compliance with EIA861.

For HDMI-DVI connection

• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

• HDMI-DVI connection requires separate audio connections as well

and the audio signals are converted from digital to analog.

• DVI does not display 480i image which is not in compliance with

EIA/CEA-861/861B.

External Device Connection

HDMI Connection

HDMI connection offers the highest picture quality.

HDMI (High-Deﬁnition Multimedia Interface) transports high deﬁnition

digital video and multi-channel digital audio through a single cable.

ComponentVideo Connection

ComponentVideo connection offers better picture quality for

video devices connected to the unit.

If you connect to the unit’s ComponentVideo Input jacks,

connect audio cables to the Audio L/R Input jacks right beside

the ComponentVideo connector.

BD/DVD recorder

with the HHDMI output jack

TITLE

CHAPTER 15

REPEAT A-B

HDMI OUT

component video cables

(red

blue green)

audio cables

HDMI cable

(green) (blue) (red)

AUDIO OUT

COMPONENT VIDEO OUT

Pb/Cb Pr/Cr

HDMI-DVI Connection

TITLE

CHAPTER 15

REPEAT A-B

Use an HDMI-DVI conversion cable to connect the unit to

external video devices equipped with DVI output jack.

(Use HDMI 1 Input jack only and Audio L/R below HDMI 1

Input jack on rear of TV.)

BD/DVD recorder

with tthe component video output jacks

cable receiver or satellite box

with the DDVI output jack

Note

STEREO

PCM

• The unit accepts 480i/480p/720p and 1080i of video signals for

this connection.

AUDIO OUT

DVI OUT

S-Video Connection

S-Video connection offers good picture quality for video

devices connected to the unit.

To HDMI 1 Input

jack only

If you connect to the unit’s S-Video Input jack, connect audio

cables to the Audio L/R jacks below theVideo connector.

HDMI-DVI

conversion cable

audio cables

Download from Www.Somanuals.com. All Manuals Search And Download.

English

BD/DVD recorder, camcorder and

VCR withh the S-VVideo output jack

DIGITAL AUDIO

COAXIAL IN

TITLE

CHAPTER 15

REPEAT A-B

Dolby Digital

decoder

S-VIDEO

OUT

AUDIO OUT

S-Videeo cable

audio cables

digital audio coaxial cable

PC Connection

CompositeVideo Connection

This unit is equipped with a PC input jack. If you connect this

unit to your PC, you can use this unit as a PC monitor.

Use anVGA cable for this connection and it requires stereo

mini plug audio cable as well.

CompositeVideo connection offers standard picture quality

for video devices connected to the unit. If you connect to the

unit’s CompositeVideo Input jack, connect audio cables to

the Audio L/R Input jacks right beside the CompositeVideo

connector.

VGA cable

When the audio jack of the video device is monaural, connect

an audio cable to the Audio L Input jack.

VGA cable should be

with ferrite core.

camcorder

video game

stereo mini plug cable

STAND-BY

STEREO

VCR

VIDEO

OUT

AUDIO OUT

personal computer

The following video signals can be displayed:

Format

VGA

Resolution

Refresh rate

video cable

640

480

SVGA

XGA

800

1,024

1,280

1,360

600

768

60Hz

audio cables

WXGA

Note

• If you connect to the S-Video Input jack and the CompositeVideo

Input jack at the same time, the S-Video connection will have

priority.

Other formats or non-standard signals will not be displayed

correctly.

Note

• Please purchase theVGA cable that has a ferrite core.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your

PC.

Digital Audio Output Connection

(for digital broadcasting and DVD functions only)

If you connect this unit to an external digital audio device, you

can enjoy multi-channel audio like 5.1ch digital broadcasting

sound.

Use a digital audio coaxial cable to connect the unit to

external digital audio devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

USEFULTIPS

Troubleshooting Guide

If the unit does not perform properly when operated as instructed in this manual,

check the following chart and all connections once before calling for service.

Symptom

Remedy

•

Make sure the AC power cord is plugged in.

•

Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into

the AC outlet to ensure that AC outlet operates normally.

No power

•

If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.

•

Press only one button at a time. Do NOT press more than one button at the same time.

Ensure that no buttons on the remote are depressed and move freely.

Control button's do not work.

•

Check whether the connection of the antenna, cable receiver or satellite box is connected

correctly.

Check whether all the cables to the unit are connected to the correct output jack of your device

like BD/DVD recorder.

Power is ON but no screen image.

•

Make sure that the selected input mode is connected to the working input jack.

Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.

Tap any key on the keyboard to wake up your computer.

•

Check if the power is on.

Check if the correct input mode is selected.

Check whether all the cables to the unit are connected to the correct output jack of your device

like BD/DVD recorder.

•

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn

on the unit again.

Check whether the connection of the antenna, cable receiver or satellite box is connected

correctly.

No picture or sound

•

Make sure that the selected input mode is connected to the working input jack.

Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.

Tap any key on the keyboard to wake up your computer.

•

Make sure that the sound is not muted. Press

volume level will appear on theTV screen.

MUTE so that the volume bar and current

Make sure that the volume is NOT set to [ ] or [Mute]. If so, use VOL. ▲/▼ to adjust the desired

volume.

•

View otherTV channels.The problem might be limited to the broadcasting station.

Adjust [Color] in the main menu.

No color

Adjusted [Picture] or [Sound]

settings are not effective every time

the unit is turned on.

•

You must set [Home] in [Location]. p.24

➠

Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.

•

Electrical interference from nearby appliances may affect picture quality.

Adjust [Contrast] and [Brightness] in the main menu.

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

For the best picture quality, watch "High Definition" wide screen programs.

If the HD content is not available, watch "Standard Definition" programs instead.

Sound okay, picture poor

Picture okay, sound poor

•

View otherTV channels.The problem might be limited to the broadcasting station or weak signal

strength.

•

Check if the audio cable is connected in correctly.

You may be getting interference from electrical appliances, automobiles, motorcycles or ﬂuorescent

lights.

Try moving the unit to another location to see if this is the cause of the problem.

You see a distorted picture or hear

an unusual sound.

•

Electrical interference from nearby appliances may affect picture quality.

View otherTV channels.The problem might be limited to the broadcasting station.

Ghosts, lines or streaks in picture

You see "noise" or "trash" on the

screen.

•

When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will

be increased to match the capabilities of the display of the unit.This may cause noise or trash.

Different color marks on theTV

screen

•

View otherTV channels.The problem might be limited to the broadcasting station, missing data or

pixelation.

•

This unit will memorize the volume level froam the last time you adjusted it.

If the volume of the sound from another device is higher or lower, then the loudness will change.

You switch to a different input and

the volume changes.

You switch to a different input and

the screen size changes.

•

This unit will memorize the viewing mode from the last time you used the particular input modes.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

Symptom

Remedy

•

If you are using the unit as a PC monitor, make sure that [Horizontal Position] and

The display image does not cover

the entire screen.

[Vertical Position] in [PC Settings] are set correctly.

•

If you are watchingTV or using the CompositeVideo, ComponentVideo or HDMI with 480i Input,

press SCREEN MODE

repeatedly to switch various screen modes.

Captions are displayed as a white

box. No caption is displayed in

the Closed Caption-supported

program.

•

Interference from buildings or weather conditions may cause captioning to be incomplete.

Broadcasting station may shorten the program to insert advertisement.

The closed caption decoder cannot read the information of the shortened program.

No caption is displayed when

playing back a disc or a cassette

tape containing captions.

•

The disc or cassette tape may be illegally copied, or the caption signal might not have been read

during copying.

Black box is displayed on theTV

screen.

•

The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].

Make sure the disc is compatible with the unit.

Completely distorted picture or

black/white picture with DVD.

Picture freezes momentarily during

playback.

Check the disc for ﬁnger prints/scratches and clean with a soft cloth wiping from center to edge.

•

Clean the disc.

Ensure the disc is correctly inserted.

Check if the disc is defective by trying another disc.

Cancel the parental lock or change the control level.

Insert a correct disc that plays on this unit.

Handle a disc with special care so that it does not have ﬁngerprints, scratches, or dusts on its

surface.

Disc cannot be played.

Buttons do not work or the unit

stops responding.

•

To completely reset the unit, unplug the AC power cord from the power outlet for 5-10 seconds.

Operations may not be permitted by the disc. Refer to the instructions of the disc.

The unit does not respond to

some operating commands during

playback.

•

The angle cannot be switched for DVD which do not contain multiple angles. In some cases

multiple angles are only recorded for speciﬁc scenes.

Angle does not switch.

Playback does not start when the

title is selected.

•

Check the [PARENTAL] setting.

The password for rating level has

been forgotten.

Enter the default password (4737), then your forgotten password will be cleared.

Note

• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a ﬁxed point of blue,

green or red.

This is not to be considered a defect in the LCD screen.

• Some functions are not available in speciﬁc modes, but this is not a malfunction. Read the description in this manual for more details on

correct operations.

• Some functions are prohibited on some discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

FAQ

Question

Answer

•

Check the antenna or cable connection to the main unit.

•

Check the batteries of the remote control.

Check if there is an obstacle between the infrared sensor window and the remote control.

•

Test the signal output. If okay, then possible infrared sensor trouble. [IR Signal Check]

p.39

➠

Aim the remote control directly at the infrared sensor window on the front of the unit.

Reduce the distance to the unit.

My remote control does not work.

What should I do?

Re-insert the batteries with their polarities (+/− signs) as indicated.

When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote

control signal of this unit.

•

Move the infrared-equipped device away from this unit, change the angle of the infrared sensor or

turn off the infrared communication function.

How come the Initial setup

appears every time I turn on this

unit?

•

Connect the RF coaxial cable to the unit directly and run the initial setup.

Make sure to complete the channel scan before the unit goes into standby mode.

•

Make sure [Autoprogram] has been completed.

p.19

➠

Autoprogram must be completed when you set up the unit for the ﬁrst time or move it to a location

where previously unavailable channels are broadcast.

•

The selected channel may not be broadcasting.

When [Autoprogram] is interrupted and not completed, some channels will not be received. Make

Why can I not watch some RF

signalTV programs.

sure to complete the Autoprogram.

p.19

➠

•

The selected channel cannot be viewed by the [Child Lock] setting.

p.21

➠

The unit requires some kind of antenna input.An indoor antenna (VHF/UHF), an external antenna

(VHF/UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the

unit.

•

Check if the correct input mode is selected by pressing INPUT SELECT or using CH ▲/▼.

[Switching Each Input Mode]

p.14

➠

How come there is no image from

the connected external devices?

•

Check the antenna or cable connection to the unit.

When using the ComponentVideo Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/

Cr) connectors are connected to their corresponding colored jacks on the unit.

•

Many digital channels have alternate channel numbers.The unit changes the numbers automatically to

the ones signifying the broadcasting station channel number.These basic numbers used for previous

analog broadcasts. (e.g., input ch#30 auto changes to ch#6.1)

When I enter a channel number, it

changes automatically.

•

Clean the disc.

Ensure the disc is correctly inserted.

Check if the disc is defective by trying another disc.

Cancel the parental lock or change the control level.

Insert a correct disc that plays back on this unit.

Handle a disc with special care so that it does not have ﬁngerprints, scratches or dusts on its surface.

My disc cannot be played back.

Is there any way I can play my disc?

•

Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts.

Most captioning production companies can display a dialog to maximum of 220 words per minute. If

a dialog exceeds that rate, selective editing is used to insure that the captions remain up-to date with

the currentTV screen dialog.

Why are captions not displayed

entirely? Or, captions are delayed

behind the dialog.

•

There is no clock function on this unit.

How can I set the clock ?

I cannot change the [Child Lock]

setting because my PIN code no

longer works.

If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code

is set to the default code “0000”. [Child Lock]

p.21

➠

Download from Www.Somanuals.com. All Manuals Search And Download.

English

INFORMATION

Maintenance

Glossary

ATSC

Cabinet Cleaning

Wipe the front panel and other exterior surfaces of the

unit with a soft cloth.

Never use a solvent or alcohol. Do not spray insecticide

liquid near the unit. Such chemicals may cause damage and

discoloration to the exposed surfaces.

Acronym that stands for AdvancedTelevision Systems Committee and

the name of the digital broadcasting standards.

•

Aspect Ratio

The width of aTV screen relative to its height. ConventionalTVs are 4:3

(in other words, theTV screen is almost square); widescreen models

are 16:9 (theTV screen is almost twice as wide as its height).

(Consumer Electronics Control)

CEC

Panel Cleaning

Wipe the panel of the unit with a soft cloth. Before cleaning

the panel, disconnect the AC power cord.

This allows you to operate the linked functions between our brand

devices with CEC feature and this unit.We do not guarantee 100%

interoperability with other brands of CEC compliant devices.

ComponentVideo

Disc Handling

Handle the discs so that ﬁngerprints and dust do not adhere

to the surfaces of the discs.

This is a video signal format that conveys each of 3 principal colors

of light (red, blue and green) through different signal lines.This allows

the viewers to experience picture colors as original as it is.There are

several signal formats, includingY/Pb/Pr andY/Cb/Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress digital

sound. It offers stereo sound (2ch) or multi-channel audio.

(High-Definition Multimedia Interface)

HDMI

•

Always store the disc in its protective case when it is not

used.

To clean-off, use a soft cloth.

Do not use a hard cloth since this will mar the disc.

Wipe the disc in a straight line form center to edge.

Never wipe with a circular motion.

Interface that supports all uncompressed, digital audio/video formats

including set-top box, BD/DVD recorder or digital television, over a

single cable.

•

(High DefinitionTV)

HDTV

Ultimate digital format that produces high resolution and high picture

quality.

Do not use detergent or abrasive cleaning agents.

NTSC

Acronym that stands for NationalTelevision Systems Committee and

the name of analog broadcasting standards.

Servicing

Should your unit become inoperative, do not try to correct

the problem yourself.There are no user serviceable parts

inside. Call our toll free customer support line found on the

cover of this manual to locate an authorized service center.

Off the air NTSC signals are no longer being sent by major

broadcasting stations in the USA.

PIN code

A stored 4-digit number that allows access to parental control features.

Region Code

If the Laser Optical Pickup Unit is Dirty

Regions associate discs and players with particular areas of the world.

This unit will only play back discs that have compatible region codes.

You can find the region code of your unit by looking on the rear panel.

Some discs are compatible with more than one region (or all regions).

If the unit still does not perform properly when it is operated,

while referring to the relevant sections and to [Troubleshooting

Guide] in this manual, the laser optical pickup unit may be

dirty. Consult your dealer or an Authorized Service Center for

inspection and cleaning of the laser optical pickup unit.

(Secondary Audio Program)

SAP

Second-audio channel delivered separately from main-audio channel.

This audio channel is used as an alternate in bilingual broadcasting.

IR Signal Check

(Standard DefinitionTV)

SDTV

If the remote control is not working properly, you can use a

digital camera (including a cellular phone with built-in camera)

to see if it is sending out an infrared signal.

Standard digital format that is similar to the NTSC picture quality.

S-Video

Offers higher quality images by delivering each signal, color (c) and

luminance (y) independently of each other through a single cable.

With a digital camera

(including built-in cell phone cameras):

Point the Digital Camera towards the remote

control infrared diode at the front of the

remote control. Press any button on the

remote control and look through the camera

display. If the infrared pulsating light appears

through the camera, the remote control is

sending out an IR signal.

Download from Www.Somanuals.com. All Manuals Search And Download.

General Speciﬁcations

Other Speciﬁcations

Terminals

Antenna Input VHF/UHF/CATV

Audio Input

CompositeVideo Input

RCA jack x 1

75Ω unbalanced (F-type)

500mV rms

TV format

Closed Caption system

ATSC/NTSC-MTV standard

RCA jack (L/R) x 6

§15.122/FCC (digital CC)

§15.119/FCC (analog CC)

1V p-p (75Ω)

S-Video Input

Channel coverage (ATSC/NTSC)

Terrestrial DTV (ATSC)

VHF 2~13

Mini DIN 4 pin jack x 1

1V p-p (75Ω)

286mV p-p (75Ω)

ComponentVideo Input

RCA jack x 3

1V p-p (75Ω)

UHF 14~51 each channel has e.g.)

2.1~2.9, 3.1~3.9, etc.

Pb/Cb 700mV p-p (75Ω)

Terrestrial Analog (NTSC)

VHF 2~13

Pr/Cr 700mV p-p (75Ω)

HDMI Input

PC Input

HDMI 19pin x 2

D-Sub 15pin x 1(RGB)

UHF 14~69

Mini jack ø3.5mm x 1(audio)

CATV

2~13,A~W,

W+1~W+94 (analog W+1~W+84),

A-5~A-1, 5A

Digital Audio Output (coaxial)

RCA jack x 1

1/8 inches x 1(3.5mm)

500mV p-p (75Ω)

Headphone

Tuning system

Channel access

Channel frequency synthesized tuning

system

Direct access keyboard,

Programmable scan, and up/down

Remote control

Digital encoded infrared light system

Operating temperature

DVD

41°F (5°C) to 104°F (40°C)

Discs (playback compatibility)

DVD-video, DVD-RW/-R,

audio CD, CD-RW/-R

Power requirements

120V~ AC +/− 10%, 60Hz +/− 0.5%

Frequency response

DVD (linear sound) 20 Hz to 20 kHz (sample rate: 48 kHz)

Power consumption (maximum)

57W

19inches

(18.5 inches measured diagonally)

20 Hz to 44 kHz (sample rate: 96 kHz)

20 Hz to 20 kHz

Signal-to-noise ratio (S/N ratio)

LCD

Dimensions

Width 18.8 inches (477.5mm) 18.8 inches (477.5mm)

Height 13.1 inches (330.4mm) 14.5 inches (365.8mm)

Depth 5.4 inches (134.7mm) 8.3 inches (210.0mm)

90 dB (JEITA)

Total distortion factor

9.15 lbs.

(4.15kg)

9.71 lbs.

(4.40kg)

DVD

1 KHz 0.007% (JEITA)

Weight

Electrical Speciﬁcation

Audio Output

1W, 16Ω x 2

•

Designs and speciﬁcations are subject to change without

notice and without our legal obligation.

If there is a discrepancy between languages, the default

language will be English.

Download from Www.Somanuals.com. All Manuals Search And Download.

English

LIMITED WARRANTY

( )

(

)

NINETY 90 DAY LABOR / ONE 1 YEAR PARTS

WARRANTY COVERAGE:

This warranty obligation is limited to the terms as set forth

below.

mission, or (d) if any serial number has been removed or defaced,

or (e) product, accessories or consumables sold “AS IS” without

warranty of any kind by including refurbished product sold “AS

IS” by some retailers.

WHO IS COVERED:

This product warranty is issued to the original purchaser or the

person receiving the product as a gift against defects in materials

and workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original

sales receipt showing the product name and the purchase date

from an authorized retailer is considered such proof.

This Limited Warranty does not cover:

•

Shipping charges to return defective product.

Labor charges for installation or setup of the product, adjust-

ment of customer controls on the product, and installation or

repair of antenna/signal source systems outside of the product.

Product repair and/or part replacement because of improper

installation or maintenance, connections to improper voltage

supply, power line surge, lightning damage, retained images or

•

WHAT IS COVERED:

This warranty covers new products if a defect in material or

workmanship occurs and a valid claim is received within the

Warranty Period. At its option, the company will either (1)

repair the product at no charge, using new or refurbished

replacement parts, or (2) exchange the product with a product

that is new or which has been manufactured from new, or ser-

viceable used parts and is at least functionally equivalent or most

comparable to the original product in current inventory, or (3)

refund the original purchase price of the product.

tent for extended periods, product cosmetic appearance items

due to normal wear and tear, unauthorized repair or other

cause not within the control of the company.

Damage or claims for products not being available for use, or

for lost data or lost software.

Damage from mishandled shipments or transit accidents when

returning product.

•

Replacement products or parts provided under this warranty are

covered against defects in materials and workmanship from the

date of the replacement or repair for ninety (90) days or for the

remaining portion of the original product’s warranty, whichever

provides longer coverage for you. When a product or part is

exchanged, any replacement item becomes your property and the

replaced item becomes company property. When a refund is

given, your product becomes company property.

it to operate in any country other than the country for which

it was designed, manufactured, approved and/or authorized, or

•

A product used for commercial or institutional purposes

(including but not limited to rental purposes).

can be provided.

Failure to operate per Owner’s Manual.

Note: Any product sold and identified as refurbished or

renewed carries a ninety (90) day limited warranty.

TO OBTAIN ASSISTANCE…

Contact the Customer Care Center at:

1-866-321-3927

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all requirements

can result in delay.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON

THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE

ON THIS PRODUCT IS LIMITED IN DURATION TO THE

DURATION OF THIS WARRANTY.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-

TATIONS:

This Limited Warranty applies only to new company manufac-

to any hardware product or any software, even if packaged or

sold with the product, as manufacturers, suppliers, or publishers

may provide a separate warranty for their own products pack-

aged with the bundled product.

The company is not liable for any damage to or loss of any pro-

grams, data, or other information stored on any media contained

within the product, or other additional product or part not cov-

ered by this warranty. Recovery or reinstallation of programs,

data or other information is not covered under this Limited

Warranty.

Some states do not allow the exclusions or limitation of inciden-

tal or consequential damages, or allow limitations on how long an

implied warranty lasts, so the above limitations or exclusions may

not apply to you.

This warranty does not apply (a) to damage caused by accident,

abuse, misuse, neglect, misapplication, or non-supplied product,

(b) to damage caused by service performed by anyone other than

company approved Authorized Service Location, (c) to a product

FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501

Printed in China

Download from Www.Somanuals.com. All Manuals Search And Download.

Singer Sewing Machine CSP1 User Manual
Sonic Alert Thermometer SBT425SS User Manual
Sony Cell Phone PEG SJ20 User Manual
Sony Home Theater System FST ZX8 User Manual
Sony Indoor Furnishings SU 36F2 User Manual
Sony Personal Computer VPCL14 Series User Manual
Sony Snowshoes SNC RZ30 User Manual
Star Micronics Printer LC 15 User Manual
Sunrise Medical Mobility Aid C001022 User Manual
Swann DVR DVR8 8600 User Manual