Sylvania DVD VCR Combo DVC860E User Manual

Owner's Manual

Please read before using this equipment.

DVD/CD Player with Video Cassette Recorder

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

DVC860E

Table of Contents

Precautions

Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ Important Safegards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4

Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4

About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbol Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setup

■ About the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6

Connection to a TV (for VIDEO) . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8

■ VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

■ Preset for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10

Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Supplied Accessory

• Remote control

(NB101UD/

• RF cable (?????)

NB151UD) with

two AA batteries

VCR Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . 11

■ Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ On-Screen Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Hint for Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ MTS System (Multi-Channel Television Sound) . . . . . . . . . . . 13

■ Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Time Search / Index Search / Auto Repeat . . . . . . . . . . . . . . . . 14

• Audio/Video cables • Owner’s Manual

(?????)

(0VMN0?????)

DVD Functions

Owner's Manual

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ The On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17

■ Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

■ Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18

Repeat Playback / Repeat A-B Playback /

Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18

■ Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Audio Language / Subtitle Language / Camera Angle /

Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . 19

■ DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

To return the All Selections of SET UP (except PARENTAL) to the Default Setting. . . 22

If you need additional operating assistance after

reading this owner’s manual or to order replace-

ment accessories, please call

TOLL FREE : 1-800-968-3429

or visit our web site at http://www.funai-corp.com

Information

■ Troubleshootinh Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Español

■

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Basic TV Connection

(Back of

Cable

Signal

Antenna

Cable

Signal

Antenna

DVD/VCR)

(Back of TV)

outlets

(Back of TV)

ANT-IN

Plug in

ANT-OUT

Disconnect

From

Connect

DVD/VCR

Connect

From

RF Cable (supplied)

Download from Www.Somanuals.com. All Manuals Search And Download.

Please refer to "Connections" on page 5.

Important Safeguards

1. Read Instructions - All the safety and operating instruc-

tions should be read before the appliance is operated.

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

FIGURE A

ANTENNA

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

LEAD

WIRE

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

cleaners. Use

damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the

possibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference

to unplugging the appliance in the cleaning description

otherwise required in item 5.

6. Attachments - Do not use attachments not recommended

by the video product manufacturer as they may cause haz-

ards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swim-

ming pool, and the like.

8. Accessories - Do not place this video product on an unsta-

ble cart, stand, tripod, bracket, or table. The video product

may fall, causing serious injury to a child or adult, and seri-

ous damage to the appliance. Use only with a cart, stand,

tripod, bracket, or table recommended by the manufactur-

er, or sold with the video product. Any mounting of the

appliance should follow the manufactur-

er's instructions and should use a

mounting accessory recommended by

the manufacturer. An appliance and cart

combination should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provid-

ed for ventilation and to ensure reliable operation of the

video product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

14. Lightning - For added protection for this video product dur-

ing a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall out-

let and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touch-

ing such power lines or circuits as contact with them might

be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this video product through any openings as they may

touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

19. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the mark-

ing label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience recepta-

cles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any

way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are

required, be sure the service technician has used replace-

ment parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

22. Heat - This video product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation Location

Symbol Used in This Manual

The following symbols appear in some head-

ings and notes in this manual.

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do

not place anything directly on top of the unit. Do not

place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid

places. Avoid places with insufficient ventilation for

proper heat dissipation. Do not block the ventilation

holes on the sides of the unit. Avoid locations sub-

ject to strong vibration or strong magnetic fields.

VCR

Description refers to playback of video cassette tapes.

DVD-V

: Description refers to playback of DVD-Video discs.

: Description refers to playback of Audio CDs.

MP3

Avoid the Hazards of Electrical Shock and Fire

: Description refers to playback of MP3 files.

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

Note to CATV system installer

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in par-

ticular, specifies that the cable ground should be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

• Do not put your fingers or objects into the DVD/VCR

cassette holder.

Moisture Condensation Warning

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. Do not use this unit at least for 2 hours

until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

This product incorporates copyright protection tech-

nology that is protected by method claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse aengineering or disassembly is

prohibited.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-

marks of Dolby Laboratories.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

About the Discs

Playable Discs

Recorded

signals

Playable

Mark (logo)

discs

Disc size

Disc types

Region code

DVD-Video

*1,2,4

DVD-R

Example

12 cm

8cm

Title 1

Title 2

DVD-RW

Digital video

(MPEG2)

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1

Chapter 2

* 1,3,4,5

DVD+R

DVD+RW

*1,3,4,5

Audio CD

* 4

Example

12 cm

Digital audio

Track 1

Track 2

Track 5

Track 6

Track 3

Track 4

8cm

MP3

12 cm

8cm

Example

CD-R

Digital audio

Group 1

Group 2

CD-RW

MP3

Track 1

Track 3

Track 2

Track 5

* 4,5

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL or SECAM

cannot be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the discs’ producers.

*3: Only the discs which have been recorded in the video format and finalized can be played back.

Discs unfinalized or recorded in the video recording format cannot be played back.

Depending on the recording status of a disc, the disc may not be played back at all or normally

(the picture or sound may be not be smooth, etc.).

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

Unplayable Discs

On the following discs, only the sound can be heard (picture cannot be viewed).

CDV

CD-G

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM

CD-I

Photo CD

Video CD.

DVD with region codes other than 1 or ALL.

DTS-CD

DVD-ROM for personal compurters.

CD-ROM for personal computers.

SACD

Any other discs without compatibility indications.

Connections

Please refer to “Basic TV Connection” on cover page before you use this unit.

RF Output Channel

If channel 3 is already occupied for broadcasting,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Press the PLAY button once.

Hint

• The RF output channel may

not change when you adjust

tracking during playback. In

this case, stop the playback,

and start the playback again.

After that, press the PLAY

button on the DVD/VCR for 3

seconds again.

4) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.

•

The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.

• When a picture does not appear on the TV screen, repeat step [4].

5) Press the STOP button to stop playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Hint for Cable Box or Satellite Box

(Back of DVD/VCR)

Connection B

Connection A

(Cable box or

Satellite box)

ANT-IN

(Cable box or

Satellite box)

ANT-OUT

Cable

Signal

ANT-OUT

OUT

RF Cable

(supplied)

Cable

Signal

(Back of TV)

RF Cable (supplied)

RF Cable

Select this connection when you want to view or record a scram- Select this connection when you want to change channels on the

bled channel. With this connection, channels cannot be changed DVD/VCR. With this connection, you may watch one channel

on the DVD/VCR. You can view or record ONLY the channels you while recording another.

have selected on the cable box or the satellite box.

• While you are recording, only the recorded channel can be

viewed.

To select channels of the cable box or satellite box

1) Turn on the DVD/VCR by pressing the POWER button, and

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

1) At the cable box or satellite box, select channel 3 or 4 (the

same channel as the DVD/VCR’s RF output channel.)

• Refer to “RF Output Channel”.

then, press the VCR/TV button.The “POWER” and “VCR” indi- 2) At the TV, select the same channel as the output channel (3 or

cators on the front panel will light on. Then, press the CHAN- 4) of the cable box or satellite box.

NEL buttons to select channel 3 or 4 (the same channel as the 3) Turn on the DVD/VCR by pressing the POWER button, and

output channel of the cable b ox or satellite box).

• If you use the channel 4, you need to change the DVD/VCR’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as you

have selected at step 1).

3) At the cable box or satellite box, select the channel you want to

view or record.

then, press the VCR/TV button. The “POWER” and “VCR” indi-

cators on the front panel will light on. Then, select the channel

you want to view or record.

To play back a tape

Follow the steps 1) to 2) above. Then, play back a tape.

• Refer to “Playback” on page 11.

To view one channel while recording another

1) While you are recording on the DVD/VCR, press the VCR/TV but-

ton so that the “VCR” indicator disappears on the DVD/VCR.

2) At the cable box or satellite box, select the channel you want to view.

Connection to an Audio System

Method 1

Method 2

Dolby Digital decoder

Stereo system

Analog audio

input jacks

COAXIAL

AUDIO

Digital audio

input jacks

Audio cable

(supplied)

Audio Coaxial

Digital cable

(commercially

available)

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD

AUDIO S-VIDEO

OUT OUT

COMPONENT

DIGITAL

VIDEO OUT

AUDIO OUT

VIDEO OUT

VIDEO IN

P^B

COAXIAL

DVD/VCR

DIGITAL

AUDIO OUT

P^R

DVD

AUDIO S-VIDEO

OUT OUT

COMPONENT

VIDEO OUT

(Analog)

AUDIO OUT

DIGITAL

AUDIO OUT

P^B

COAXIAL

P^R

WARNING!

Note

Set “DOLBY DIGITAL” to “OFF” on the AUDIO menu (refer to

pages 20-21.) Otherwise, you may generate noise distortion

and/or damage the speakers.

• Set “DOLBY DIGITAL” to “ON” on the AUDIO menu for

Dolby Digital sounds (refer to pages 20-21.)

• The audio source in a 5.1 channel Dolby Digital surround

format cannot be recorded in the same format by an MD or

DAT deck.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV (for VIDEO)

Method 1

Method 2

Method 3

Basic Audio

Good picture

Better picture

Best picture

COMPONENT

VIDEO IN

S-VIDEO IN

VIDEO IN

S-Video

cable

(commercially

Video

cable

(supplied)

Audio cable

(supplied)

Component

Video cables

(commercially

available)

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD

AUDIO S-VIDEO

OUT OUT

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

COMPONENT

VIDEO OUT

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

DIGITAL

AUDIO OUT

DVD

DVD/VCR

AUDIO OUT AUDIO IN

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

AUDIO OUT

OUT

ANT-IN

P^B/

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

P^B/

CB/

P^R/

COAXIAL

VIDEO OUT

VIDEO IN

VIDEO OUT

VIDEO IN

P^R/

DVD

AUDIO S-VIDEO

OUT OUT

Video out

S-Video out

Component Video out

COM

VIDE

DIGITAL

AUDIO OUT

COAXIAL

Analog Audio out

Notes

•

Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

The video signal is not output from the VIDEO OUT jack when connecting with S-VIDEO OUT or COMPONENT VIDEO OUT jacks.

If your TV is compatible with progressive scanning (480p);

Connect the TV to the COMPONENT VIDEO OUT jacks of this unit, and set to the progressive scanning mode by

pressing the PLAY button for more than 5 seconds on the front of the DVD/VCR. “P-SCAN” will appear on display

of the DVD/VCR.

[DVD/VCR]

OUTPUT

VCR

DVD

STOP

PLAY

To set to the interlace mode, press the PLAY button for more than 5 seconds on the front of the DVD/VCR.

“P-SCAN” will disappear on display of the DVD/VCR.

When the progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO

more than

5 seconds

OUT jacks.

If your TV is not compatible with progressive scanning;

Keep this unit to the interlace mode (Make sure that “P-SCAN” on display of the DVD/VCR lights off).

Front & Rear Terminals

DVD ANALOG AUDIO OUT

jacks

Connect the supplied audio

cables here through the Audio

In jacks of a television or other

audio equipment (DVD only).

DVD/VCR AUDIO OUT jacks

AUDIO IN jacks

Connect the supplied audio

Connect audio cables coming

cables here through the Audio from the audio out jacks of a

In jacks of a television or other camcorder, another VCR, or an

audio equipment.

ANT IN jack

Connect your antenna

or cable box here.

audio source here.

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

ANT-IN

COMPONENT

VIDEO OUT

COAXIAL jack

DIGITAL

AUDIO OUT

Connect an optional coaxial

digital audio cable here

through the Coaxial Digital

Audio In jack of a decoder or

audio receiver.

DVD

AUDIO S-VIDEO

DVD/VCR

AUDIO OUT AUDIO IN

VCR

COMPONENT

VIDEO OUT

DIGITAL

OUT

ANT-IN

AUDIO OUT

R ^L

P^B

ANT-OUT

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

COAXIAL

VIDEO OUT

VIDEO IN

P^R

S-VIDEO OUT jack

ANT OUT jack

VIDEO IN jack

COMPONENT VIDEO

OUT jacks

DVD/VCR VIDEO OUT jack

Connect an optional

S-Video cable here

through the S-Video

In jack of a television.

(DVD only)

Connect the RF

cable (supplied)

to the antenna

input jack on

your TV.

Connect a cable com-

ing from the video out

jack of a camcorder,

another VCR, or an

audio-visual source

(laser disc player, video

disc player, etc.) here.

Connect the yellow video

Connect optional component cable (supplied) here

video cables here through

the component Video In

jacks of a television.

through the TV’s Video In

jack.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Remote Control and Front Panel

VCR mode

DVD mode

Disc/Tape

₍B_Au_lpt_ht_ao_bn_{etical order)}

Remote Controls

DVD-V

MP3

VCR

•To select chapter directly.

•To select track directly.

•To select channel.

OPEN/CLOSE

+1 0

POWER

/EJECT

SPEED

AUDIO

•To search forward/backward

•To forward/backward a tape.

through a disc.

SKIP/CH.

• To select an item

VCR/TV

SLOW

on the VCR Menu.

ENTER

•To move the cursor and

• To advance to the next

VCR Menu.

determine its position.

VCR

+1 0

DVD

• To return to the

DISPLAY

PAUSE

previous VCR Menu.

A-B

•To repeat between your

chosen point A and B.

PLAY

ANGLE

AUDIO

•To select camera angles on

STOP

a disc.

REC/OTR

•To select audio languages on •To select STEREO,

ENTER

a disc.

L-CH or R-CH.

SETUP TOP MENU

RETURN

•To clear the markers.

CLEAR/

C. RESET

•To clear the markers.

•To clear the numbers

entered incorrectly.

•To remove status No.

MODE

CLEAR/

C. RESET

MODE

ZOOM

•To reset the tape counter.

in program input.

•To clear the numbers

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

entered incorrectly.

DISPLAY

DVD

•To display the current disc

•To display the current time,

mode.

tape counter, and channel.

• To select the DVD output

mode.

• To activate the remote control

in DVD mode.

MODE

•To call up the Menu

•To call up the VCR Menu.

on a disc.

•To set black level on/off.

•To arrange the playing

•To set virtual surround on/off. order or play randomly.

Installing the Batteries

for the Remote Control

OPEN/CLOSE

/EJECT

•To open or close the disc

•To eject the video cassette

tray.

from the VCR.

• To pause tape playback or

recording.

PAUSE

•To pause disc playback.

•To advance playback

one frame at a time.

Install two AA batteries

• To pause disc playback.

•To advance playback

one frame at a time.

(supplied) matching the polarity indi-

cated inside battery compartment of

the remote control.

• To begin tape playback.

•To turn the unit on or off.

• To start a recording.

• To begin disc playback.

PLAY

POWER

•To turn the unit on or off.

REC/OTR

REPEAT

RETURN

•To play a chapter or title

•To play a track or disc

repeatedly.

•To return to the previous

operation on the DVD setup

menu.

•To search chapter, title or time.•To search track or time.

MODE

•To rapidly return to

a location of disc.

•To rapidly return to

a location of disc.

•Search the markers.

•To select the recording speed.

•Search the markers.

SETUP

•To call up the DVD setup

menu.

SKIP/CH.

• To skip chapters.

• To skip tracks.

• To change channels.

SLOW

• To view the tape

in slow motion.

SPEED

STOP

Keep in mind the following when using

the remote control:

• Make sure that there is no obsta-

cle between the remote and the

remote sensor on the unit.

• Use within the operating range

and angle, as shown.

•To display the current time,

tape counter, and channel.

• To stop playback.

• To stop playback or recording.

SUBTITLE

T-SET

•To put the VCR into standby

•To select subtitles on a disc.

mode for a timer recording.

TOP MENU

VCR

•To call up the Top Menu

on a disc.

• To select the VCR output

mode.

• To activate the remote control

in VCR mode.

VCR/TV

ZOOM

• To select VCR or TV position.

•To magnify the part of picture.

(x2/x4)

Remote

control

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Display

DVD-V

OPEN/CLOSE

Lights up when a disc

is on the tray.

Lights up when repeat-

track function is on.

OUTPUT

Lights up when the

A-B repeat function

is on.

POWER

VCR

DVD

REW

F.FWD STOP/EJECT PLAY

REC/OTR

STOP

PLAY

Lights up when

repeat-chapter

function is on.

CHANNEL

DVD

Lights up when the

progressive scan

system is activated.

Lights up when

repeat-group

function is on.

repeat function is on.

Lights up when

repeat-title

function is on.

GROUP

P.SCAN

DVD

Lights up when

the ALL repeat

function is on.

No disc inserted

/ can not read disc

Lights up when a

CD is on the tray.

Lights up when the

inserted disc comes

to a pause.

Opening the tray

Closing the tray

Loading the disc

Displays how long the current title

or track has been played back. When

a chapter or track is switched, the

number of a new title, chapter or

track is displayed.

Lights up when the inserted

disc is being played back.

VCR

Lights up

Lights up when

the timer recording or an

OTR recording has been set.

Lights up when

the DVD/VCR is

in VCR mode.

when a tape is

DVD

in the DVD/VCR.

When a disc is being

play back

Lights up during

playback when

the repeat function

is on.

Lights up during a recording.

Flashes when a recording

is paused.

VCR

REC

Lights up when

the playback is

in still or slow mode.

Lights up when

current time is P.M.

Works as a tape counter(hour,minute,second).

Also displays a channel number,

tape speed, remaining time for OTR or

current time.

Lights up when the inserted

cassette is being played

back.

VCR/DVD Switching

Because this product is a combination of a VCR and a DVD player, you must select first which

component you wish to operate with the OUTPUT button.

VCR MODE

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

OUTPUT

POWER

VCR

DVD

Press the VCR button on the remote control.

REW

.FWD STOP/EJECT PLA

REC/OTR

STOP

PLAY

CHANNEL

DVD

(Verify that the VCR OUTPUT light is lit.)

SKIP/CH.

VCR/TV

SLOW

DVD MODE

VCR

+1 0

DVD

VCR button

DVD button

DISPLAY

PAUSE

Press the DVD button on the remote control.

OUTPUT

PLAY

(Verify that the DVD OUTPUT light is lit.)

STOP

VCR

DVD

REC/OTR

Note

DVD OUTPUT light

ENTER

• Pressing only the OUTPUT button on the front

panel DOES NOT switch the mode of the

remote control. You MUST select the correct

mode on the remote control, too.

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

ZOOM

OUTPUT button

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

VCR OUTPUT light

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Preset for Use

Turn on the unit for the first

time

To Preset the Channel Again

1) Press the MENU button until the main

CLOCK SET

MONTH DAY YEAR

0 3 1 5 MON 2 0 0 4

menu appears.

VCR

HOUR MINUTE AM/PM

– – – – – –

2) Select "CHANNEL SET UP" by pressing

the K or L button. Then, press the B but-

ton.

VCR

Select the current year

3) Select "AUTO SET UP" by pressing the

K or L button. Then, press the B button.

After scanning, the tuner stops on the low-

est memorized channel.

Turn on the TV and set it

to channel 3.

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section.

To Change the On-Screen Language

1) Press the MENU button until the main

CLOCK SET

MONTH DAY YEAR

menu appears.

0 3 1 5 MON 2 0 0 4

POWER

Remote Control TV Screen

2) Select "LANGUAGE SELECT" by press-

ing the K or L button. Then, press the B

button.

HOUR MINUTE AM/PM

0 5 – – – –

LANGUAGE SELECT

3) Select "ENGLISH" , "FRANCAIS" or

"ESPAÑOL" by pressing the K or L but-

ton. Then, press the CLEAR/C.RESET

button.

Select the current hour

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

Hint

CLOCK SET

MONTH DAY YEAR

• If you accidentally select Spanish or

French and need English: Press the

MENU button and choose SELEC.

0 3 1 5 MON 2 0 0 4

IDIOMA, or SELECTION LANGUE. Press

the B button, and select ENGLISH. Finally,

press the CLEAR/C.RESET button.

HOUR MINUTE AM/PM

0 5 4 0 – –

CH 01

AUTO SET UP

Select the current minute

Clock Set Up

VCR

Do you connect the cable from the cable box or

the satellite box to the DVD/VCR’s ANT IN jack?

YES

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

CLOCK SET

MONTH DAY YEAR

0 3 1 5 MON 2 0 0 4

Yes Press the MENU

HOUR MINUTE AM/PM

[ON]

button to exit

0 5

4 0

P M AM

B PM

• Refer to “Hint for Cable Box

or Satellite Box” section on

• If the clock is not set, the

CLOCK SET screen

appears when you press

the MENU button. In this

case, go to step [2].

Select “AM” or “PM”

page 6.

No Please wait for a few minutes.

After scanning...

• The tuner stops on the lowest memorized

channel.

• You can select only the channels memo-

rized in this unit by using the CHANNEL

buttons.

• If "AUTO SET UP" appears on the TV

screen again, check the cable connections.

Then, press the B button once again.

To exit the CLOCK SET

screen.

CLOCK SET

MONTH DAY

0 3 – –

YEAR

– – – –

HOUR MINUTE AM/PM

– – – – – –

Hint

Select the current month

• Repeat these steps only if either there

was a power failure or this unit has been

unplugged for more than 30 seconds.

• To go back one step, press the s button

(during the steps [2] to [7].)

•

Your clock setting will be lost if either there

is a power failure or this unit has been

unplugged for more than 30 seconds.

To Select a Channel

You can select a channel by directly

entering channel using the Number but-

tons on the remote control.

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

– – – –

Notes for using the Number buttons:

• When selecting cable channels which

are higher than 99, enter channel

numbers as a three-digit number.(For

example: 117, press 1,1,7)

HOUR MINUTE AM/PM

– – – – – –

Select the current day

• You must precede single-digit channel

numbers with a zero (For example:

02, 03, 04 and so on).

–

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Function

Playback

Before: Turn on the TV and set it

to channel 3.

Hint

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

• If channel 3 is already occupied for

broadcasting, see “RF Output

Channel” section.

• When a tape with-

out record tab is

inserted, the

OPEN/CLOSE

SKIP/CH.

VCR

DVD/VCR will start

playback automati-

cally.

• Tracking will be

automatically

adjusted upon play-

back. To adjust the

tracking manually,

press the CHAN-

NEL buttons.

VCR/TV

SLOW

POWER

VCR

REW

F.FWD STOP/EJECT PLAY

REC/OTR

CHANNEL

VCR

+1 0

DVD

Remote Control TV Screen

DISPLAY

PAUSE

PLAY

PLAYB

PLAY

STOP

3 2

REC/OTR

OPEN/CLOSE

/EJECT

STOP

EJECT A

Recording & OTR (One Touch Recording)

Before:

Turn on the TV and set it to

Hint

• To view one chan-

nel while recording

another

channel 3.

• If channel 3 is already occupied for

broadcasting, see “RF Output Channel” section.

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

VCR

1) While you are

recording on the

DVD/VCR, press

the VCR/TV button

so that the “VCR”

indicator disappears

on the DVD/VCR.

2) At the cable box

or satellite box,

VCR

OPEN/CLOS

SKIP/CH.

Remote Control TV Screen

VCR/TV

SLOW

POWER

REW

F.FWD STOP/EJECT PLAY

REC/OTR

CHANNEL

SKIP/CH.

VCR

+1 0

DVD

DISPLAY

PAUSE

CH12

+1 0

PLAY

• Select the

desired channel

select the channel

you want to view.

with tab

STOP

REC/OTR

• If you have connect-

ed the DVD/VCR to

a cable box or satel-

lite box, refer to

“Hint for Cable Box

or Satellite Box”

section on page 6.

• Select the desired tape

speed

ENTER

SPEED

SETUP TOP MENU

RETURN

Tape Speed

Recording/Playback Time

Type of tape

SP mode

SLP mode

T60

T120

2hours

6hour

T160

2-2/3hours

8hour

1hour

3hour

Accidental erasure prevention

REC/OTR

To prevent accidental recording on a record-

ed cassette, remove its record tab. To record

on it later, cover the hole with cellophane

tape.

REC

You can select a fixed recording time by press-

ing the REC/OTR button repeatedly.

Record tab

REC

OTR(0:30)

OTR(1:00).....

(Normal recording)

You can not copy a DVD to a videotape.

OTR(8:00)

OTR(7:30)

To stop recording temporarily (Pause mode)

OPEN/CLOSE

/EJECT

STOP

EJECT A

Press the PAUSE/STILL button.

STOP

• During the rec-pause mode, five

marks appear on the TV

mark represents one minute.

• Press it again to resume recording.

screen. Each

Other Operations

To cue or review picture during playback

(Picture Search)

Counter Reset

Hint

Press the CLEAR/C.RESET button.

•

Still/Slow/Pause

mode will be

Press the F.FWD or REW button.

To play back in slow motion

• Press it again and the DVD/VCR will search in

super high speed. (in the LP/SLP modes only)

automatically

cancelled after 5

minutes to pre-

vent damage to

the tape and the

video head.

Press the SLOW button during playback or the still

mode.

To freeze the picture on TV screen during play-

• If the noise bars appear on the TV screen, you can

reduce it by pressing the CHANNEL buttons.

back (Still mode)

Press the PAUSE/STILL button. Each time you

press the button, the picture will be forwarded by

one frame.

• To return to

playback from

the Picture

Search/Still/

Slow mode,

press the PLAY

button.

Auto Rewind

When a tape reaches its end during playback, fast-for-

ward, or recording (except timer recording and One

Touch Recording), the tape will automatically rewind

to the beginning. After rewinding finishes, the

• If the picture begins to vibrate vertically during the

still mode, stabilize the picture by pressing the

CHANNEL buttons.

• If the picture is distorted or rolling vertically, adjust

the vertical hold control on your TV, if equipped.

DVD/VCR will eject the tape and turn itself to off.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Operations

VCR

SKIP/CH.

To call up the main menu 3 To decide

VCR/TV

SLOW

-MENU-

CHANNEL SET UP

AUTO SET UP

VCR

+1 0

DVD

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

DISPLAY

PAUSE

B MANUAL SET UP

PLAY

STOP

REC/OTR

To select an item

To exit the menu

ENTER

-MENU-

CLEAR/

C. RESET

SETUP TOP MENU

RETURN

TIMER PROGRAMMING

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

MODE

CLEAR/

C. RESET

MODE

ZOOM

SUBTITLE

T-SET

ANGLE

REPEAT

A-B

LANGUAGE SELECT

Recording Features

Timer Recording

•Insert a tape with its record tab into the DVD/VCR.

VCR

ONE TIME PROGRAM

PROGRAM NUMBER

Select the desired start time

VCR

(hour)

DATE

0 5 / 0 3 MON

-MENU-

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

ONE TIME PROGRAM

PROGRAM NUMBER

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

CHANNEL

1 6

DATE

0 5 / 0 3 MON

REC SPEED SP

B SP

SLP

START TIME 0 7 : 3 0 – –

END TIME – – : – – – –

CHANNEL

– –

[ON]

Select the desired recording speed

REC SPEED – –

CLEAR/

C. RESET

Select the minute

SUBTITLE

T-SET

PROGRAM NUMBER

DATE – – / – –

START TIME – – : – – – –

END TIME – – : – – – –

•

indicator on the front panel lights up.

The DVD/VCR will change to the DVD mode.

CHANNEL

– –

REC SPEED – –

Hint

• To go back one step, press the

the steps [3] to [9].)

button (during

Select an empty program

number

ONE TIME PROGRAM

PROGRAM NUMBER

DATE

0 5 / 0 3 MON

To Check, Correct, or Cancel a

Timer Program

START TIME 0 7 : 3 0 PM

END TIME – – : – – – –

CHANNEL

– –

REC SPEED – –

1) Press the SUBTITLE/T-SET button

then, the VCR button on the remote

control.

B PM

PROGRAM NUMBER

B ONCE

DAILY

WEEKLY

Select “AM” or “PM”

2) Select main menu by pressing the

MENU button.

3) Select "TIMER PROGRAMMING"

by pressing the K or L button.

Then, press the B button.

4) Select the program number which

you want to check by pressing the K

or L button. The details of the pro-

gram you selected will appear on

the TV screen.

• Go to the digit you want to change

by pressing the B or s button.

Then, enter correct numbers by

pressing the K or L button.

• You may cancel the entire program

by pressing the s button while the

program number flashes.

Repeat the procedure in steps 5

and 6 to set the end time.

Select “ONCE”, “DAILY”

(Mon-Fri), or “WEEKLY”

Select the desired month

ONE TIME PROGRAM

PROGRAM NUMBER

DATE 0 5 / 0 3 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

PROGRAM NUMBER

DATE

0 5 / 0 3 MON

START TIME – – : – – – –

END TIME – – : – – – –

CHANNEL

1 6

REC SPEED – –

CHANNEL

– –

REC SPEED – –

5) Press the CLEAR/C.RESET button

to exit.

6) Press the SUBTITLE/T-SET button

to return to timer stand-by mode.

Select the desired channel

If you have connected the DVD/VCR to a

cable box or satellite box as the

Connection A on page 6, select the VCR

to channel 3 or 4 (the RF output channel

of the VCR). Then, select the desired

channel at the cable box or satellite box.

Leave the cable box or satellite box on for

timer recording.

•

Select the desired day

• You can program one

year in advance.

To cancel a Timer Recording in

progress

Press the STOP/EJECT button on

the DVD/VCR.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Hint for Timer Recording

• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

• If a tape is not in the DVD/VCR or does not have the record tab, the TIMER indicator flashes and timer recording cannot be performed. Please insert a recordable tape.

• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light flashes. (If the DVD power is off, the VCR will become STAND-

BY status).

• When all timer recordings are finished, the TIMER light will flash.

To use the VCR again as usual, press the SUBTITLE/T-SET button to disable the flashing the TIMER light, then press the VCR/TV button to select the VCR position. Select either VCR or DVD mode,

then continue with the other features as described in this manual.

• When timer recordings are set, the TIMER light will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/T-SET button so that the TIMER light disappears. Press

the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.

If you want to use the DVD player during a VCR timer recording or while the TIMER light is on or flashes.

• You can use the DVD player while the TIMER light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD. Press the DVD button on the remote control to choose

DVD mode, then continue with the other DVD features as described in this manual.You don’t have to set the TIMER off to use the DVD only.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

1) Insert a pre-recorded tape into the playing VCR.

2) Insert a tape with its record tab into the recording

DVD/VCR.

(Back of TV)

3) Press the SPEED button on the remote control

(Back of another source)

(Back of Recording DVD/VCR*)

of the recording DVD/VCR to select the desired

recording speed (SP/SLP).

AUDIO OUT

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD

AU-VIOIDEO

VCR

AUDIO IN

DVD/VCR

AUDIO OUT

COMPONENT

VIDEO OUT

COMPONENT

VIDEO OUT

ANT-IN

DIGITAL

AUDIO OUT

OU UT

ANT-IN

Connect

4) Select the "L1" or "L2" position on the recording

Connect

VIDEO OUT

VIDEO

VIDEO OUT ^IN

ANT-OUT

COAXIAL

VIDEO IN

VIDEO OUT

ANT-OUT

DVD/VCR.

RF cable

(supplied)

*Front input jacks are also available

•

To use the input jacks on the back of the DVD/VCR,

select "L1" position by pressing [0], [0], [1] on the

remote control or the CHANNEL buttons.

Audio/Video cables

(supplied)

• To use the input jacks on the front of the VCR,

select "L2" position by pressing [0], [0], [2] on

the remote control or the CHANNEL buttons.

Hint

• For best results during dubbing, use the VCR’s front panel controls whenever possible.

The remote control might affect another source’s operation.

5) Press the REC/OTR button on the recording

• Always use video-quality shielded cables with RCA-type connectors. Standard audio

cables are not recommended.

• You can use a video disc player, satellite receiver, or other audio/video component with

A/V outputs.

• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

• “L2” input jacks are on the front of this player.

DVD/VCR.

6) Begin playback of the tape in another source

7) To stop recording, press the STOP/EJECT but-

ton on the recording DVD/VCR, then stop play-

back of the tape in another source

MTS System (Multi-Channel Television Sound)

VCR

WhenYou Receive or Record a

VCR

Program Broadcast in MTS

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

• When you receive a broadcast on

the VCR, you can check the type

of the broadcast by pressing the

DISPLAY button.

• When "TV STEREO" or "SAP"

selection is valid, select them by

following steps. This selection is

needed when you record the pro-

gram.

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

B TV STEREO

LANGUAGE SELECT

B AUDIO OUT

TV STEREO

SAP

[ON]

SAP

Select “TV STEREO” or

“SAP”

• SAP means Second Audio

Program (usually second lan-

guage).

To exit the menu.

CLEAR/

C. RESET

AUDIO OUT

B HIFI

MONO

[ON]

When You Play Back a Tape

Recorded in Hi-Fi Stereo

Display on the

TV screen

Type of

broadcast

STEREO/SAP

Selection

Regular

-None-

-Invalid-

(monaural audio)

• If you have connected a stereo TV to

this DVD/VCR, select "STEREO".

• If you have connected a monaural TV

to this DVD/VCR, select "MONO".

Stereo

broadcast

STEREO

Select “HIFI” or “MONO”

TV STEREO

(main audio program)

Bilingual

broadcast

SAP

(second audio program)

TV STEREO

Stereo &

Bilingual

broadcast

(stereo main audio program)

Your Selection

STEREO

SAP

MONO

Monaural

L+R

SAP

L-channel

R-channel

Type of recorded tape

(second audio program)

To exit the menu.

non Hi-Fi tapes

Monaural

CLEAR/

C. RESET

Hi-Fi tapes

recorded in

Hi-Fi stereo

Hi-Fi tapes

recorded main

audio program

Main audio

program

Main audio

program

Main audio

program

Hi-Fi tapes

recorded second

audio program

Second audio Second audio Second audio

program

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Features

Time Search

Index Search

Auto Repeat

You can repeat playback of a

whole tape automatically.

You can specify the time for fast

forwarding or rewinding.

You can specify the number of pro-

grams to be skipped.

• Insert a tape into this unit.

VCR

-MENU-

INDEX SEARCH

TIME SEARCH

– : – –

MODE

– –

TIMER PROGRAMMING

B AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

[ON]

x2 (Twice)

x1 (Once)

Select the desired length of

time for fast forwarding or

rewinding

INDEX SEARCH

0 3

-MENU-

TIME SEARCH

TIMER PROGRAMMING

B AUTO REPEAT [ON]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

2 : 5 0

01 ~ 20

CURRENT PROGRAM

Beginning

End

of tape

[ON]

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

INDEX MARK

0:01~ 9:59

(1 minute~9 hours

and 59 minutes)

AUTO REPEAT B

To rewind

To fast forward

After searching,

To rewind

To fast forward

After searching,

Hint

• To cancel Auto Repeat, follow steps [1]-[2] above.

Then, press the

button, so that [OFF] appears

beside AUTO REPEAT. Press the

CLEAR/C.RESET button to exit.

• If menu remains on the TV screen at step [3],

press the CLEAR/C.RESET button to exit.

PLAYB

Hint

• This unit stores index mark at the beginning of

the recording. There should be time gap between

two index marks for the Index Search.

Hint for Timer Search & Index Search

• These functions are not available during recording.

• Press the STOP button to stop the search.

• If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Function

Playback

Before:

Hint

Turn on the TV and set it to channel 3.

• If channel 3 is already occupied for broad-

casting, see “RF Output Channel” section.

OPEN/CLOSE

/EJECT

POWER

• When you play an MP3

file, details for page 16.

SPEED

AUDIO

Note

• Unless stated, all described

operations are based on

remote control use.

• Some operations can be car-

ried out along the menu bar on

the TV screen.

• A “prohibited icon” may

SKIP/CH.

appear at the

DVD

top-right on

VCR/TV

SLOW

the TV

DVD-V

screen when the opera-

tion is prohibited by the

disc or this unit.

VCR

+1 0

DVD

DISPLAY

PAUSE

OPEN/CLOSE

PLAY

OPEN/CLOSE

/EJECT

• Some DVDs may be

played from title 2 or 3

due to specific pro-

grams.

• During the playback of a

two-layered disc, pic-

tures may stop for a

moment. This happens

while the 1st layer is

being switched to the

2nd layer. This is not a

malfunction.

POWER

STOP

REC/OTR

Remote Control TV Screen

OPEN/CLOSE

STOP

PLAY

OUTPUT

POWER

VCR

DVD

REW

F.FWD STOP/EJECT PLAY

REC/OTR

STOP

PLAY

CHANNEL

DVD

OPEN/CLOSE

/EJECT

4 3

DVD menu

Fast Forward/Reverse Search

DVDs may contain menus to access special features. Press

appropriate Number buttons or use the arrow (K/L/s/B)

buttons to highlight your selection on the DVD main menu

and press the ENTER button to confirm.

DVD-V

MP3

Press the g or h button repeatedly dur-

ing playback to select the required forward or

reverse speed.

To continue playback, press the PLAY

button.

• For DVDs, the speed is: 1(x2), 2(x8), 3(x50), 4(x100).

• For Audio CDs, the speed is fixed at x16.

• For MP3, the speed is fixed at x8.

Calling up a Menu Screen during Playback

• Press the MENU button to call up the DVD menu.

• Press the TOP MENU button to call up the title menu.

Note

• Menu operations may vary depending on the disc. Refer to

the manual accompanying the disc for details.

Slow Forward/Slow Reverse

Resume

DVD-V

MP3

Press the g or h button repeatedly dur-

ing the pause mode to select the required for-

ward or reverse speed: 1(1/16), 2(1/8), 3(1/2).

To continue playback, press the PLAY

button.

Press the STOP button. Resume message will appear on

the TV screen.

Press the PLAY button, play-

back will resume from the

point at which playback was

stopped.

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

Zoom

DVD-V

• To cancel resume, press the

STOP button one more time

during the Stop mode.

1) Press the ZOOM button during playback.

2) Press the ZOOM button repeatedly to select the

required zoom factor: x2, x4 or OFF.

• For MP3, playback will resume from the beginning of the

track at which playback was stopped.

3) Use the arrow (K/L/s/B) buttons to slide the zoomed

picture across the screen.

Paused and Step-by-Step Playback

4) To exit zoom mode, press the ZOOM button to select

“OFF”.

DVD-V

MP3

Press the PAUSE button during playback.

To continue playback, press the PLAY

button.

HINT:

• Zooming function does not work while the disc menu is

showing up.

• x4 zoom is not available on some discs.

DVD-V

The disc goes forward by one frame each time the PAUSE

button is pressed during the pause mode.

To continue playback, press the PLAY button.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 Playback

MP3 is a method of compressing files.You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.

DVD

MP3

STOP

Insert a MP3-format disc, then press

the MENU button to call up the MP3

menu on the TV screen.

Hint

• Some selections may take a while to be recognized.

• After you choose a folder, press the ENTER button to open and see the track selections in the

folder. Press arrow (K/L) buttons to choose a track, and then press

to play.

or the ENTER button

• Press the TOP MENU button to return to the first item.

• Folders are known as Groups; files are known as Tracks.

• MP3 files are accompanied by

icon.

•Press B when you want to go

• A maximum of 255 folders can be recognized.

• A maximum of 512 files can be recognized.

• Up to 8 hierarchies can be created.

to the next hierarchy.

ENTER

•Press s when you want to go

back to the previous hierarchy.

This player recommends the files recorded under the following circumstances:

• Sampling frequency: 44.1kHz or 48kHz

• Constant bit rate: 112kbps ~ 320kbps.

The On-Screen Display

You can check the information about the current disc by pressing the DISPLAY button on the remote control.

DVD

DVD-V

DISPLAY

4/12 0:03:21 - 0:02:15

Remaining time of the current track

Elapsed time of the current track

11/16 0:00:00 - 0:03:30

Remaining time of the current chapter

Elapsed time of the current chapter

TR(Track):

Current track number / Total tracks

DISPLAY

CH(Chapter):

Current chapter number / Total chapters

ALL:

DISPLAY

Current track number / Total tracks

4/12 0:13:45 - 0:45:40

Current repeat setting appears only when

the repeat setting is active

T: Track repeat

1/3 0:00:00 - 1:23:45

A: All Tracks repeat

Remaining time of the current title

Elapsed time of the current title

B: A-B repeat

Remaining time of the current audio CD

Elapsed time of the current audio CD

DISPLAY

TT(Title):

Current title number / Total titles

DISPLAY

DVD

Layer numbers, appears only when playing

a two-layered Disc

MP3

DISPLAY

L0: Layer 0 is playing

L1: Layer 1 is playing

TRACK 01

Current repeat setting appears only when

the repeat setting is active

The name of the file currently in play

will be displayed.

C: Chapter repeat / T: Title repeat /

DISPLAY

B: A-B repeat

TR(Track):

Current Track number / Total Tracks

BIT RATE: The amount of audio and video

data currently being read

1/36 0:01:15

DISPLAY

Current Repeat setting, if active

T: Track repeat

G: Group (folder) repeat

A: Disc repeat

Elapsed playing time of the current track

DISPLAY

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Search Function

Track Search

Title / Chapter Search

Time Search

DVD

MP3

DVD-V

Using the number buttons

Using the SEARCH MODE button

PLAY

TOTAL 1:29:00

MODE

/12

MODE

x repeatedly until this

screen appears

+1 0

x1(Press once) for the chapter search

x2 (Press twice) for the title search

•For single digit tracks (1-9), press a

single number (eg. track 3, press 3).

•To play track 26, press +10, 2, 6 of the

Number buttons.

TOTAL

1:23:45

/12

+1 0

Within 30 seconds

+1 0

Using the SEARCH MODE button

Within 30 seconds

MODE

Using the SKIP

button

PLAY

Current Chapter

(CH)

+1 0

CH 1 CH 2 CH 3 CH 4

Within 30 seconds

SKIP/CH.

SKIP

Using the SKIP

button

PLAY

Current Track

(TR)

TR 1 TR 2 TR 3 TR 4

SKIP/CH.

SKIP

Marker Setup

DVD

To return to the marker

later

To exit the marker screen

DVD-V

This feature allows you to assign a specific

point on a disc to be called back later.

To set a marker

RETURN

PLAY

MODE

x repeatedly until this

screen appears

MODE

x repeatedly until this

screen appears

Notes

¡Opening the disc tray or turning off the

power will erase all markers.

¡Selecting “AC” at step [2] in the sec-

tion “To set a marker” will also erase

all markers.

¡To clear a marker, select the marker to

be cleared at step [2] in the section

“To return to the marker later,” and

then press the CLEAR/C.RESET but-

ton.

ENTER

at the desired marker

•Playback will restart from the specific point

which you set.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat / Random / Programmed Playback

Repeat Playback

Repeat A-B Playback

Programmed Playback

DVD

DVD-V

DVD

MP3

DVD-V

MP3

You may determine the order in which

tracks will play.

PLAY

A-

Repeat function is available only during playback.

A-B

STOP

PLAY

CD-DA

TOTAL 0:00:00

at your desired starting point (A).

ENTER

MODE

REPEAT

A-B

x1 (Press once)

Each time the REPEAT button is pressed...

at your desired end point (B).

DVD-V

CD-DA

TOTAL 0:08:00

3:30

2:30

¡Point B should be in the same title

or track as point A is.

(current chapter repeat)

(current title repeat)

(repeat off)

CHAPTER

10 1:30

ALL CLEAR

ENTER

2/2

3:30

TITLE

¡To exit the sequence, press the A-B

button.

¡To cancel Point A, press the

CLEAR/C.RESET button.

ENTER

Up to 99 programs

OFF

¡This function does not work in the

other repeat modes.

(current track repeat)

(entire disc repeat)

(repeat off)

TRACK

ALL

PLAY

Random Playback

Notes

OFF

¡Press the CLEAR/C.RESET but-

ton at step [2] to erase the most

recently entered program.

¡To erase all programs at once,

select “ALL CLEAR’’ and press

the ENTER button at step [2].

¡While a program is being played

back, the STOP button works as

follows;

This shuffles the playing order of tracks

instead of playback in the sequence.

DVD

MP3

(current track repeat)

(current group repeat)

(entire disc repeat)

(repeat off)

TRACK

GROUP

ALL

RANDOM

STOP

CD-DA

TOTAL 0:45:55

RANDOM PROGRAM

--no indication--

MODE

PLAY

OFF

⇒

Press the STOP button and the

PLAY button next, so that the pro-

grammed playback restarts. (CD

playback restarts from the current

point. MP3 playback restarts from

the beginning of the current track.)

Press the STOP button twice and

the PLAY button next, so that play-

back restarts from the first track in

the original order. However, your

programmed playback can be

restarted when you follow the above

steps. (Your programs are still

stored until either the disc tray is

open or power is turned off.)

x2 (Press twice)

¡Repeat setting will be cleared when

moving to another title, chapter, or

track.

¡Repeat playback are not available

with all discs or during repeat A-B

playback.

PLAY

⇒

Note

¡If you want to repeat the current

track in the random selections,

press the REPEAT button repeat-

edly until

TRACK appears dur-

ing playback. If you want to repeat

the entire random selections,

press the REPEAT button repeat-

edly until

playback.

ALL appears during

¡To repeat the current track in the

program, press the REPEAT but-

ton repeatedly until “

TRACK’’

appears during playback.

¡To repeat the entire program

press the REPEAT button repeat-

edly until “ ALL’’ appears during

playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Settings

Audio Language

Camera Angle

Stereo Sound mode

DVD

DVD-V

This unit allows you to select an audio

language (if multiple languages are

available) during DVD playback.

Some DVD discs may con-

tain scenes which have

been shot simultaneously

from various angles. You can change

the camera angle it the (

appears on the screen.

This unit allows you to select a sound

mode during CD playback (if multi lan-

guage available).

) icon

PLAY

STEREO

1.ENG Dolby D 3/2.1ch 48k/3

AUDIO

PLAY

1 / 8

Each time you press the AUDIO button;

For example

ANGLE

(right and left channels

are active)

(left channel is active)

STEREO

L-CH

(English audio)

(Spanish audio)

ENG

SPA

(right channel is active)

R-CH

Note

▼

¡If the Virtual Surround setting is “1’’ or

“2’’, the sound mode will be fixed to

STEREO, and can not be changed.

(French audio)

FRE

Subtitle Language

Black Level Setting

Virtual Surround

DVD

DVD-V

MP3

DVD-V

DVD

This unit allows you to select a subtitle

language (if available) during DVD play-

back.

Adjust the Black Level Setting to make

the dark areas of the TV picture

brighter.

You can enjoy stereophonic virtual

world on your existing 2 channel stereo

system.

PLAY

1.ENG/6

PLAY

OFF

SUBTITLE

T-SET

MODE

Each time you press the SUBTITLE/T-

SET button, subtitle languages change.

For example

x2 (Press twice)

ENTER

OFF

(English subtitles)

(French subtitles)

ENG

ENTER

FRE

ON: Makes the dark areas brighter.

OFF: Shows the original picture as recorded.

1: Natural effect

2: Emphasized effect

OFF: no effects (original sound)

▼

RETURN

OFF

(no suubtitles)

RETURN

Notes

¡If your language is not shown after

pressing the AUDIO or SUBTITLE/T-

SET button several times, the disc

may not have that language. However,

some discs allow audio language or

subtitle language setting on the disc

menu. (Operation varies depending

on the discs, so refer to the manual

along with the disc.)

Note (for CD play back only)

¡Virtual Surround will not be effective if

the sound mode is set to something

other than STEREO.

¡If you choose a language that has a 3

letter language code, the code will be

displayed every time you change the

subtitle language setting. If you choose

any other languages, ‘---’ will be dis-

played instead. (Refer to page 20.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD

DVD Set Up

QUICK SETUP Menu

You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.

SETUP

STOP

Select the desired item

Confirm that QUICK is selected

ENTER

SETUP

QUICK

ENGLISH

SETUP

P20

P21

(Step 5)

PLAYER MENU

TV ASPECT

QUICK

CUSTOM

INITIALIZE

4:3 LETTER BOX

DOLBY DIGITAL

ENTER

•Refer to “PLAYER MENU”, “TV

ASPECT”, or “DOLBY DIGITAL”

section on page 20, 21.

CUSTOM Menu

You can change the DVD player’s settings.

ENTER

SETUP

STOP

to decide

Select CUSTOM

To select the desired item

ENTER

SETUP

CUSTOM

SETUP

LANGUAGE

DISPLAY

AUDIO

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

PARENTAL

LANGUAGE menu

DISPLAY menu

AUDIO menu

PARENTAL menu

SETUP

LANGUAGE

SETUP

DISPLAY

SETUP

AUDIO

SETUP

PARENTAL

PASSWORD

AUDIO

ORIGINAL

OFF

ENGLISH

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

DRC

Please enter a 4-digit password.

SUBTITLE

DISC MENU

PLAYER MENU

DOWN SAMPLING ON

DOLBY DIGITAL ON

AUTO POWER OFF ON

page 20

page 21

page 22

LANGUAGE Setting

Follow the step 1) to 3) in “CUSTOM Menu” section on page 20.

Select the desired language

Select the desired item

To exit the menu

ENTER

SETUP

ENTER

AUDIO ∗1 ∗2

(Default: ORIGINAL)

Sets the audio language.

AUDIO

Hint

ORIGINAL

ENGLISH

FRENCH

∗1

• Language options are not available with

some discs.

• If OTHER is selected on the AUDIO, SUBTI-

TLE or DISC MENU screen, press four-digit

number to enter the code for the desired lan-

guage. (Refer to the language code list on

page 24.)

• Only the languages supported by the disc

can be selected.

∗2

LANGUAGE menu

SUBTITLE: ∗1 ∗2

(Default: OFF)

Sets the subtitle language.

SUBTITLE

OFF

ENGLISH

FRENCH

SETUP

LANGUAGE

AUDIO

ORIGINAL

SUBTITLE

DISC MENU

PLAYER MENU

OFF

ENGLISH

DISC MENU: ∗1

(Default: ENGLISH)

Sets the language for DVD

menu.

DISC MENU

ENGLISH

FRENCH

SPANISH

• Language Setting for Audio and Subtitle is

not available with some discs. Then use the

AUDIO and the SUBTITLE button. Details

are on page 19.

PLAYER MENU

ENGLISH

FRANCAIS

ESPANOL

QUICK

PLAYER MENU:

(Default: ENGLISH)

Sets the language for the

On-screen display.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY Setting

You can change the display functions. Follow the step 1) to 3) in “CUSTOM Menu” section on page 20.

Select the desired item

6 To exit the menu

SETUP

QUICK

TV ASPECT:

(Default: 4:3 LETTER BOX)

See Hint to the right.

Select the

desired

setting

ENTER

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

4:3 LETTER BOX

4:3 PAN & SCAN

16:9 WIDE

AUTO POWER OFF ON

DISPLAY menu

ENTER

Hint

SETUP

DISPLAY

STILL MODE:

(Default: AUTO)

See Hint to the right.

TV ASPECT:

Select the

desired

setting

• Select “4:3 LETTER BOX”, so

that black bars appear on the

top and bottom of the screen.

• Select “4:3 PAN & SCAN” for

a full height picture with both

sides trimmed.

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

ENTER

AUTO POWER OFF ON

STILL MODE

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

FIELD

FRAME

AUTO

AUTO POWER OFF ON

• Select “16:9 WIDE” if a wide-

screen TV is connected to this

unit.

ENTER

ANGLE ICON:

(Default: ON)

Set to “ON” to show the angle icon when multiple camera

angles are available during DVD playback.

STILL MODE:

• Select “AUTO” usually.

• Select “FIELD” if pictures in

4:3 LETTERBOX

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

still mode are blurred.

AUTO

OFF

• Select “FRAME” for showing

pictures in still mode at high

resolution.

AUTO POWER OFF ON

ENTER

AUTO POWER OFF:

(Default: ON)

Set to “ON” to turn this unit off automatically after

35 minutes of no use.

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

4:3 LETTERBOX

AUTO

AUTO POWER OFF ON

OFF

ENTER

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)

to 3) in “CUSTOM Menu” section on page 20.

6 To exit the menu

Select the desired item

SETUP

DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC

OFF

DOWN SAMPLING ON

DOLBY DIGITAL

ENTER

Hint

AUDIO menu

DOWN SAMPLING:

(Default: ON)

Set to “ON” when outputting in 48 kHz.

SETUP

AUDIO

• When playing disc with copy-

right Protection, the sound will

be down sampled at 48kHz,

even if you set to OFF.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL ON

Set to “OFF” when outputting the original sound.

DRC

DOWN SAMPLING ON

OFF

DOLBY DIGITAL

ENTER

QUICK

DOLBY DIGITAL:

(Default: ON)

Set to “ON” when the unit is connected to a Dolby Digital receiver.

• ON: Outputs a Dolby Digital Signals

• OFF: Convert the Dolby Digital into PCM (2 channel)

DRC

DOWN SAMPLING ON

DOLBY DIGITAL ON

OFF

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL Setting

Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.)

This feature prevents your children from viewing inappropriate materials.

Parental Levels

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.

Follow the step 1) to 3) in “CUSTOM Menu” section on page 20.

To exit

the menu

Enter your desired four-

digit password (except

for 4737)

Select “PARENTAL

LEVEL”

Select the

desired levels

SETUP

ENTER

PARENTAL LEVEL

ALL

PARENTAL LEVEL

CHANGE

ALL

+1 0

7 [NC-17]

6 [R]

PARENTAL menu

SETUP

PARENTAL

Hint

PASSWORD

CONTROL LEVELS

• ALL:

• Levels 8:

Please enter a 4-digit password.

All parental locks are cancelled.

DVD softwares of any grades (adult/general/children) can be played back.

• Levels 7 to 2:

• Level 1:

Only DVD softwares intended for general use and children can be played back.

Only DVD softwares intended for children can be played back, with those intended for adult

and general use prohibited.

Password for Parental Controls

You can change your password for parental controls. Follow the step 1) to 3) in “CUSTOM Menu” section on page 20.

To exit

the menu

Select “CHANGE”

Enter your new

four-digit password

(except for 4737)

Enter your desired four-

digit password (except

for 4737)

SETUP

ENTER

PARENTAL LEVEL

CHANGE

ALL

+1 0

SETUP

PASSWORD

Please enter a 4-digit password.

PARENTAL

PARENTAL menu

SETUP

PARENTAL

PASSWORD

Please enter a 4-digit password.

If you have set a password already,

enter the current four-digit

password.

Hint

• Record the password in case you forget it.

• If you forget the password, press 4, 7, 3, 7 at

step 4, then enter your new password.

SETUP

PARENTAL

• Password will be cleared and parental levels

will be set to ALL.

PASSWORD

Enter current password.

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting

To exit

the menu

SETUP

STOP

SETUP

ENTER

Select “YES”

Select INITIALIZE

(twice)

SETUP

INITIALIZE

SETUP

Hint

• When you cancel

to initialize at step

3,select “NO”.

SETUP

Initialize?

YES

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check the

player consulting the following checklist.

PROBLEM

No power.

CORRECTIVE ACTION

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

The player does not respond to • Check if the power plug is connected to an AC outlet.

the remote control.

• Check the batteries in the remote control.

• Aim the remote control directly at the remote sensor. If necessary, remove all the

obstacles between the sensor and the remote.

• You have to be within 23 feet of the player.

• Check if the right mode is selected. If it’s not in the right mode, press DVD or VCR

buttons, whichever you need, on the remote control.

• Check if a cassette tape is in the VCR.

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-

ume up, then. If you hear some signal sound from the radio in response to your

pressing buttons on the remote, the remote control is working.

Timer recording is impossible. • Make sure the timer recording is set correctly.

• Make sure the power is off.

• Make sure the VCR clock is set correctly.

Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

• Activate the player in VCR mode. Press VCR on the remote control so that the green VCR

OUTPUT light is lit.

Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing CHANNEL

DVD/VCR.

(

)

on the

Cannot view a tape but the

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .

• Make sure the VCR is not in the Menu mode.

audio is OK.

No, or poor, playback picture.

• Change the RF output channel to CH4. Then select the same channel on the TV.

• Fine tune your TV.

TV programs cannot be seen

normally.

• Re-check the ANT. IN and ANT. OUT connections. See page 1,6.

• Press VCR/TV.

• Press VCR on the remote control to activate it in the VCR mode. Check if the green VCR

OUTPUT light is lit. Then, set it to the TV position by pressing VCR/TV.

Video or color fades in and out

when making a copy of a video tape.

•

You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

Cannot remove the tape.

• Check if the player is in the VCR mode. If not, press VCR on the remote control to switch

the mode.

No picture.

• Connect the video cables firmly.

• Insert a correct video disc that plays on this player.

• Press DVD on the remote control. Check if the DVD OUTPUT Light is lit. Then try other

DVD features.

• Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See

page 7.

• Insert the disc.

• Clean the disc.

Disc cannot be played

• Place the disc correctly with the label side up.

• Cancel the parental lock or change the control levels.

• Handle a disc with special care so that it does not have fingerprints, scratches, or

dusts on its surface.

• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

No sound

• Correct the input settings on the audio component.

• This player does not support DTS audio. This is not a malfunction.

• Connect the player directly to the TV.

No DTS audio is output

Distorted picture

•

There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language

does not match the set up.

The camera angle cannot be

changed.

•

The selected language is not available for audio or subtitles on the DVD.

This is not a malfunction.

The DVD does not contain sequences recorded from different camera angles.

This is not a malfunction.

•

Audio or subtitle language

cannot be changed.

• The DVD does not contain audio source or subtitles in the selected language.

This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by the player or the disc.

screen, prohibiting an operation This is not a malfunction.

Notes

Some functions are not available in specific modes, but this is not a malfunction. Read the descrip-

tion in this Owner’s Manual for details on correct operations.

¡Playback from a desired track and random playback are not available during program playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

SERVICING

DISC HANDLING

¡Please refer to relevant topics on the Troubleshooting Guide ¡Handle the discs so that fingerprints and dust do not adhere

on page 23 before return the product. to the surfaces of the discs.

¡When this unit become inoperative, do not try to correct the ¡Always store the disc in its protective case when it is not

problem by yourself. There are no user-serviceable parts

inside. Turn off, unplug the power plug, and please call our

help line mentioned on page 1 to locate an Authorized

Service Center.

used.

AUTO HEAD CLEANING

¡Automatically cleans video heads as you insert or remove a

cassette, so you can see a clear picture.

¡Playback picture may become blurred or interrupted while

the TV program reception is clear. Dirt accumulated on the

video heads after a long period of use, or the usage of rental

or worn tapes can cause this problem. If a streaky or snowy

picture appears during playback, the video heads in your

DVD/VCR may need to be cleaned.

CLEANING THE CABINET

¡Use a soft cloth slightly moistened with a mild detergent

solution. Do not use a solution containing alcohol, spirits,

ammonia or abrasive.

CLEANING DISCS

¡When a disc becomes dirty, clean it with a cleaning cloth.

Wipe the disc from the center out. Do not wipe in a circular

motion.

¡Do not use solvents such as benzine, thinner, commercially

available cleaners, detergent, abrasive cleaning agents or

antistatic spray intended for analogue records.

1. Please visit your local Audio/Video store and purchase a

good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem,

please call our help line mentioned on page 1 to locate an

Authorized Service Center.

NOTES:

¡Remember to read the instructions along with the video

head cleaner before use.

CLEANING THE DISC LENS

¡If this unit still does not perform properly although you refer to

the relevant sections and to “TROUBLESHOOTING GUIDE” in

this Owner’s Manual, the laser optical pickup unit may be dirty.

Consult your dealer or an Authorized Service Center for

inspection and cleaning of the laser optical pickup unit.

¡Clean video heads only when problems occur.

Specifications

Output signal format

NTSC color

Dimensions

W:?”

H :?”

D :?”

(?mm)

Power source

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption

?? W (standby: ??W)

Operating temperature

41°F (5°C) to 104°F (40°C)

Weight

Approx ?lbs (?kg)

•

Designs and specifications are subject to change

without notice.

•

If there is a discrepancy between languages, the

default language will be English.

Language List

Language

Code

Language

French [FRE]

Frisian

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Code

Language

Macedonian

Malagasy

Malay

Code

Language

Siswat

Slovak

Slovenian

Somali

Code

A-B

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

6565

6557

6558

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Malayalam

Maltese

Maori

Spanish [SPA]

Sundanese

Swahili

Marathi

Moldavian

Mongolian

Nauru

Swedish [SWE]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Nepali

Norwegian [NOR]

O-R

Occitan

Bengali;Bangla

Bhutani

Bihari

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

U-Z

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Chinese [CHI]

Corsican

Croatian

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

Czech

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Korean [KOR]

Kurdish

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

5861

5847

5868

5860

5866

F-H

Setswana

Shona

Sindhi

Faroese

Fiji

Finnish [FIN]

5261

5256

5255

Singhalese

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 20. If

you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PAGE FOR SPANISH

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PAGE FOR SPANISH

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PAGE FOR SPANISH

–

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in mate-

rials or workmanship as follows:

DURATION:

PARTS:

LABOR:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year

from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are

excluded from this warranty.

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the

date of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of origi-

nal retail purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,

missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty

does not apply to any product not purchased and used in the United States.

This product is produced for home use and this warranty only covers failures due to defects in material or

workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or fail-

ures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which

results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper

maintenance, commercial use such as hotel, rental or office use of this product or damage which results

from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT

REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR

MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY

THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART

OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST

BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN

THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service pro-

cedure, please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-968-3429

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

0VMN04012 / H9600UD ★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Printed in China

–

Sharp Cash Register XE A403 User Manual
Sherwood Stereo Amplifier AX 4103 User Manual
Snom Telephone VoIP Phone User Manual
Soleus Air Dehumidifier SG DEH 30 2 User Manual
Sony MP3 Player CD WALKMAN User Manual
Sony Speaker XS V1330 User Manual
SOYO Computer Hardware SY 7IZB+ User Manual
Sterling Musical Table 8820025500 CV3 655 User Manual
Subaru Portable Generator RGX3000 User Manual
Tanita Scale BD 815U User Manual