HDD & DVD Player / Recorder
with Digital Tuner
Owner’s Manual
H2160SL9
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR
VISIT OUR WEB SITE AT http://www.sylvania-ce.com
© 2008 Funai Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Basic Connection
1) Disconnect the power cord of your TV from the AC outlet.
2) Make the basic connection as illustrated below.
HDD & DVD PLAYER / RECORDER
WITH DIGITAL TUNER
standard picture
good picture
better picture
COMPONENT
VIDEO IN
S-VIDEO IN
VHF / UHF
antenna
VIDEO
IN
TV
Y
(Green)
H2160SL9
PB/CB
(Blue)
or
PR/CR
(Red)
RCA audio cable
Playable/Recordable Discs and Files
cable TV
company
RF coaxial cable
Discs for Recording, Playing back
RCA video
S-video
cable
component
video cable
rear of your TV
cable
Disc type
Logo
DVD-RW
DVD-R
HDD
and
or
or
ANT. IN
L
R
AUDIO IN
rear of this unit
(Green)
Y
Automatically formatted
in video mode
_
VIDEO VIDEO
IN
OUT
Format Can be formatted in VR or video mode
VIDEO
OUT
Y
(Blue)
(Red)
L
L
L
Video Mode
VR Mode
OUT
O
Maximum record
time
480 min (12cm)
144 min (8cm)
480 min (12cm)
144 min (8cm)
480 min (12cm)
144 min (8cm)
240 hrs
(with SLP mode)
S-VIDEO
R
R
RF coaxial cable
IN
R
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-
(
)
L1
AUDIO OUT
Ver.2.0
COMPONENT
VIDEO OUTPUT
Ver.1.1,1.2
Ver.1.1/2× CPRM compatible
Ver.1.2/4× CPRM compatible
this unit
VIDEO OUT
S-VIDEO OUT
Recordable/playable
versions
Ver.2.0/4×
Ver.2.0/8×
Ver2.0/16×
_
_
Supplied cables used in this connection are as follows:
Playable on most DVD
players.
Playable on most DVD
players.
Finalization necessary.
(title menu will be
created)
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Playable only on VR
mode compatible unit.
Finalization
Compatibility Finalization necessary.
(title menu will be
Please purchase the rest of the necessary cables at your local store.
recommended.
created)
3) Plug in the power cords of the devices to the AC outlet.
Discs for playing back
Disc Type
Logo
DVD-VIDEO
CD-DA
CD-RW
CD-R
Connection to a TV with an HDMI™ Compatible Port
A simple 1-cable connection with a device having an HDMI
(high-definition multimedia interface) connector allows digital
transfer of both digital video signals and multi-channel audio
signals.
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The output
mode changes as follows every time [HDMI] is pressed.
is a trademark of DVD Format/Logo
Licensing Corporation.
Files for playing back
MP3
Front Panel Display
Video Output Signal
480 Progressive
Type of title
Media
JPEG
TV
CD-RW/-R
CD-RW/-R
DVD players with
DVD-RW recorded in VR mode.
are capable of playing
HDMI IN
Press [HDMI]
720 Progressive
1080 interlaced
1080 Progressive
• Following discs are recommended for good
recording quality and are proven to be
compatible with this unit. However, depending
on the media condition the unit may not read the
disc properly.
Unplayable Discs
The following discs will not play back on this unit.
Press [HDMI]
Press [HDMI]
Press [HDMI]
HDMI cable
• CD-ROM
• Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD) • DVD-ROM
Verbatim
JVC
Maxell
DVD-R 8x,
DVD-RW 4x
DVD-R 8x/16x
DVD-RW 2x
• DVD-audio
• DVD contains MP3 or JPEG files
• DVD-RW/-R recorded in non compatible recording format
• Blu-ray Disc
• Super Video CD
On the following disc, the sound may not be heard.
• Unfinalized disc
this unit
• HD DVD
Performance of any other discs are not
guaranteed.
HDMI OUT
• The HDMI mode that is not supported by display device
will be skipped.
When connecting with an HDMI cable, the audio signal will be
output as the digital audio signal simultaneously, so you do
not need the analog audio connection described on page 20.
• Super audio CD - Only the sound on the CD layer can be heard. The sound on
the high-density super audio CD layer cannot be heard.
Region Codes
The number inside the globe refers to region of the world.
This unit can play DVD that are labeled for ALL regions or
for Region 1.
Cables not included.
Please purchase the necessary cables at your local store.
Printed in China
1VMN24834 / E2M20UD_QG ★★★★★
Follow to the back side of this sheet.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Basic Dubbing
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
You need to follow these steps when you turn on this unit for the first time.
Preparing for dubbing (HDD to DVD):
• Insert a recordable DVD.
Initial Setting
CH
GHI
JKL
MNO
WXYZ
Press [POWER].
Turn on the TV. Select the input to which the unit is
connected.
1
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
PQRS
TUV
OSD Language
.@/:
GHI
JKL
TUV
English
Français
Español
1
1
CH
WXYZ
CLEAR
SETUP
DIO PEAT
HDMI
HDD to DVD
Use [K / L] to select your desired language, then press
2
PQRS
Initial Setting
2
ENU/LIST
TOP MENU
[ENTER] to set language.
to
9
Channel Preset
SETUP
AUDIO REPEAT
HDMI
Make sure the antenna is
connected to “ANTENNA IN” jack.
ENTER
Use [K / L] to select the type of broadcasting signal,
3
DISPLAY
SKIP
RETURN
SKIP
Air
Cable
2
NU/LIST
TOP MENU
DVD to HDD
then press [ENTER].
to
VARIABLE
REPLAY
4
SKIP
The unit will start getting channels available in your area.
Use [K / L] to select “DVD HDD”, then press [ENTER].
ENTER
PLAY
DISPLAY
SKIP
RETURN
SKIP
B
X
13/08
STOP
PAUSE
Press [ENTER], then use [{ / B] to select an item to
4
VARIABLE
REPLAY
SKIP
set, and use [K / L] to select the contents to suit your
DUBBING
HDD
VD
HDD
DVD
preference, then press [ENTER].
9
TIMER PROG.
REC MODE
3000 MB
Dubbing List
Add
Delete All
Dubbing Start
1/1
One-touch Dubbing...
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
6
Repeat steps 4 to 5 until you register all the
With one-touch dubbing, you can start dubbing right
away with just one touch.
titles to be dubbed.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
To dub the contents in a DVD which is finalized on
other unit, use this function.
During playback of the title you want to dub, press
[DUBBING].
If you are playing back a DVD, DVD to HDD dubbing
will start right away.
1
CH
7
After adding all the titles you want, use [K / L]
to select “Dubbing Start” in the dubbing menu,
then press [ENTER].
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPE
HDD
DVD
3
If you are playing back HDD, HDD to DVD dubbing
will start right away.
MENU/LIST
TOP MENU
• The dubbing will start from the beginning of the title
being played back.
8
Use [s / B] to select a
Please select REC MODE.
SP LP EP
High
XP
SLP
Auto
desired recording mode,
then press [ENTER].
ENTER
• The unit will dub only the title being played back.
• When dubbing from HDD to DVD or VR mode DVD-RW
to HDD, recording mode will automatically be set to
“High” whenever the conditions are met. (See page 58.)
• If the high speed dubbing is not available, the title
will be dubbed in normal speed with the recording
mode of the title.
Dubbing Titles
500 MB
3000 MB
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
PLAY
9
Use [K / L] to select “Yes”, then press [ENTER].
5
BX13/08
STOP
DVD
Dubbing will start.
To stop the dubbing in progress:
Press [STOP C] on the front panel.
DUBBING
To stop the dubbing in progress, press [STOP C] on the front panel.
HDD
Press [DTV/TV] to select analog TV or digital TV, then use
TIMER PROG.
REC MODE REC/OTR
[CH
/
] or [the Number buttons] and [-] (for digital TV
channels) to select a desired channel to record.
2
4
If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in
disc, press [DVD] first.
PLAY
OPEN/
CLOSE
Press [OPEN/CLOSE A] to open the
1
disc tray. Place the disc properly. Press
[OPEN/CLOSE A] again to close the disc
tray.
STOP
Press [STOP C] once to
3
* Make sure the disc is compatible with this
unit. (Refer to pages 10-11 in the owner's
manual for the list of compatible discs.)
stop playback temporarily.
• Refer to “Resume Playback” on page 67.
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
FCC WARNING
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority
to operate this apparatus if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful
interference to radio or television reception, which can be determined by turning the apparatus off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the apparatus and receiver.
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
LASER SAFETY
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
To Avoid the Hazards of Electrical Shock and Fire
Supplied Accessories
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from an AC outlet. Grasp it by the plug.
remote control (NB345UD) with batteries (AAx2)
• Do not put your fingers or objects into the unit.
Location and Handling
• Do not install the unit in direct sunlight, near strong
magnetic fields, or in a place subject to dust or strong
vibration.
• Avoid a place with drastic temperature changes.
• Install the unit in a horizontal and stable position.
Do not place anything directly on top or bottom of
the unit. Depending on your external devices, noise
or disturbance of the picture and/or sound may be
generated if the unit is placed too close to them. In this
case, please ensure enough space between the external
devices and the unit.
RF coaxial cable (WPZ0901TM002 / WPZ0901TM005)
• Depending on the environment, the temperature of this
unit may increase slightly. This is not a malfunction.
RCA audio/video cables (WPZ0102TM018/WPZ0102LTE01)
Dew Condensation Warning
• Dew condensation may form inside the unit in the
following conditions. If so, do not use this unit at least
for a few hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
owner’s manual (1VMN24833)
• This unit’s packaging materials are recyclable
and can be reused. Please dispose of any
materials in accordance with your local
recycling regulations.
OWNER’S MANUAL
• Batteries should never be thrown away or
incinerated but disposed of in accordance with your
local regulations concerning chemical wastes.
Notice for Progressive Scan Output
quick guide (1VMN24834)
• Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In case of picture problems with 525(480) progressive
scan output, it is recommended that the user switch
the connection to the ‘standard definition’ output. If
there are questions regarding your TV set compatibility
with this 525p(480p) DVD player, please contact our
customer service center.
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
Maintenance
Servicing
IR signal check
• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 105-109 before returning the product.
• If this unit becomes inoperative, do not try to correct
the problem by yourself. There are no user-serviceable
parts inside. Turn off, unplug the power plug and
please call our help line mentioned on the front page
to locate an Authorized Service Center.
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with
AM radio or a digital camera (including built-in camera
of cellular phone). It will help to define the cause of
malfunction.
•
•
With an AM radio:
Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.
Cleaning the cabinet
• Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing
alcohol, spirits, ammonia or abrasive.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
With a digital camera (including built-in camera of
cellular phone):
Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.
Cleaning the disc lens
• If this unit still does not perform properly
“Kodak Picture CD COMPATIBLE”
is a trademark of Eastman Kodak
Company.
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the laser
optical pickup unit may be dirty. Consult your dealer
or an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is
not used.
“Dolby® Digital Stereo Creator enables consumers to cre-
ate stereo DVD-Videos with stunning Dolby Digital sound
tracks at home. The technology, when utilized instead of
PCM recording, also saves recordable disc space, allow-
ing for higher video resolution or extended recording
time on each DVD. DVDs mastered using Dolby Digital
Stereo Creator will play back on all DVD-Video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.
HDD handling
• HDD is a precision apparatus that is susceptible
to vibration, strong impact or dirt. Depending on
the installation environment or handling, the unit
may become partially damaged or in the worst
case, recording or replaying may not be available.
Especially while the HDD is in motion, do not subject
it to vibration or strong impact or pull out the power
plug. And if a power failure occurs, the content of the
recording / replaying program may be lost.
HDMI, the HDMI logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
• HDD rotates at high speed when in operation. Be sure
that rotation has stopped and then move the unit
without subjecting it to strong impact or vibration.
© 2008 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is
strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without
the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective
owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or
right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is
strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Introduction
Disc Management
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .9
FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 12
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FORMATTING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Choosing the Recording Format of a Brand-New
DVD-RW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Reformatting a Disc Manually . . . . . . . . . . . . . . . . . . . . . 40
SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 41
PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 42
Auto Finalizing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Finalizing a Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connections
Recording
ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . 17
RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . 18
CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . 19
CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . 20
CONNECTION TO A TV WITH AN HDMI™
INFORMATION ON RECORDING . . . . . . . . . . . . . . . . . . 44
Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Restrictions on Recording . . . . . . . . . . . . . . . . . . . . . . . . . 44
SETTINGS FOR A RECORDING . . . . . . . . . . . . . . . . . . . . 45
Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Recording the DTV Closed Caption . . . . . . . . . . . . . . . . 45
BASIC RECORDING &
COMPATIBLE PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 22
ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 46
AUTOSTART RECORDING . . . . . . . . . . . . . . . . . . . . . . . . 48
TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 52
SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 53
Connection to an External Device. . . . . . . . . . . . . . . . . . 53
Recording from an External Device . . . . . . . . . . . . . . . . 54
DV DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Guide to DV and On-Screen Display . . . . . . . . . . . . . . . 55
DVC to HDD/DVD Dubbing. . . . . . . . . . . . . . . . . . . . . . . . 56
DUBBING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Information on Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Before Starting Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Selected Title Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
One-Title Dubbing between HDD and DVD . . . . . . . . 61
Basic Setup
BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Guide to On-Screen Displays and Menus. . . . . . . . . . . 23
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Switching HDD / DVD Mode. . . . . . . . . . . . . . . . . . . . . . . 26
INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
CHANNEL SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Auto Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Adding/Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . . 29
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Switching Analog Mode / Digital Mode . . . . . . . . . . . . 33
Channel Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Playback
Editing
INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 62
Structure of Disc Contents. . . . . . . . . . . . . . . . . . . . . . . . . 62
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 64
Playing Back an Audio CD and a CD-RW/-R with
INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . 76
Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
About Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
DELETING TITLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Deleting Selected Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
CREATING/DELETING PLAYLIST . . . . . . . . . . . . . . . . . . 80
Adding Titles to a Playlist. . . . . . . . . . . . . . . . . . . . . . . . . . 80
Erasing All Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
EDITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Adding or Deleting Chapter Markers Manually . . . . . 84
Deleting a Part of a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Dividing a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Combining Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Setting or Releasing the Title Protection . . . . . . . . . . . 89
Setting or Clearing All Chapter Marks at Once. . . . . . 90
Deleting All Titles in HDD. . . . . . . . . . . . . . . . . . . . . . . . . . 91
MP3/JPEG Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Using the Title/Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . 66
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 67
Variable Skip / Variable Replay. . . . . . . . . . . . . . . . . . . . . 67
Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Step by Step Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 68
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Chasing Playback during Recording . . . . . . . . . . . . . . . 69
Simultaneous Playback and Recording. . . . . . . . . . . . . 69
Playing Back the Autostart Recording . . . . . . . . . . . . . 70
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Title/Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
REPEAT/RANDOM/PROGRAM PLAYBACK/
Function Setup
LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . . 92
GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
SLIDE SHOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Program Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
SPECIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 74
Switching Virtual Surround System . . . . . . . . . . . . . . . . 75
Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 75
Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Others
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . 108
LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Español
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
This unit not only plays back DVD and CD but also offers features for you to record on HDD and DVD and edit them after that.
The following features are offered with this unit.
Recording
Dubbing
This unit is compatible with recording on HDD, DVD-RW
which are recordable repeatedly and DVD-R which accept
the additional recordings until the disc becomes full but
not overwritable. You can choose either one for your
convenience.
With this unit, you can enjoy bi-directional dubbing
between HDD and DVD.
HDD
DVD
High speed dubbing:
With this function you can dub a title much faster than
the normal speed dubbing without changing the quality
of the picture and sound.
HDD
DVD
Up to 36 program recording:
You can program the unit to record up to 36 programs,
within one month in advance. Daily or weekly program
recordings are also available.
Auto recording mode dubbing:
When dubbing, if you set the recording mode to “Auto”,
the recording mode will automatically be adjusted so the
titles will fit nicely in the remaining space of the disc.
One-touch timer recording (OTR):
You can easily set a recording time as you prefer.
Every time [REC/OTR] is pressed during recording, the
recording time will be increased by 30 minutes up to
8 hours. The recording automatically stops when the
recording time you set is reached.
DV dubbing:
This function helps you to easily dub the contents of the
DVC (digital video camcorder) to HDD/DVD.
Automatic chapter mark setting:
Chapter marks will be put on recordings as you set
before attempting to record.
Playback
HDD
DVD
Automatic playlist making:
Theater surround sound in your home:
The unit creates a playlist automatically after recording.
When connecting the unit to an amplifier or a decoder
which is compatible with Dolby Digital, you can
experience the theater surround sound from discs with
surround sound system.
Left channel stereo recording:
This unit can record the sound of the left channel
monaural input as left and right channels automatically
(the input from the L2 jacks only).
Quick search for what you want to watch:
You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by
title, chapter/track or time.
HDD
Autostart recording:
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD. By using this
function, you can pause or go back the TV program you
are currently watching, and you can also start recording
the whole TV program even at the middle of the TV
Variable skip:
You can skip forward a certain time, which is specified
in “Playback” menu in advance, with one-touch while
playback.
Variable replay:
program.
DVD
You can skip back a certain time, which is specified
in “Playback” menu in advance, with one-touch while
playback.
Automatic title menu making:
The unit creates title menu automatically when finalizing
discs.
Virtual surround system:
You can enjoy stereophonic space through your existing
Automatic title finalizing:
2 channel stereo system.
You can finalize discs automatically after finishing all
timer recordings or at the end of the disc space if you set
this in the main menu.
HDD
Chasing playback during recording and simultaneous
playback and recording:
You can play back the already recorded part of the
current recording or another title during recording.
Alternate recording:
If there is no recordable disc in the unit, if the disc does
not have enough space to complete the recording, or if
the material is “copy-once” program and prohibited to
be recorded on a DVD in the unit, the unit will detect it
and automatically record to the HDD even when DVD is
selected as the recording media.
DVD
Playing back MP3/JPEG/Kodak Picture CD files:
You can enjoy MP3/JPEG/Kodak Picture CD files which are
recorded on CD-RW/-R.
This feature is available only for timer recording. Not
available for one-touch timer recording.
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Editing
Symbols Used in this Owner’s Manual
HDD
DVD
To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.
Deleting titles:
You can delete titles which you do not need anymore.
Setting or clearing chapter marks:
You can set or clear chapter marks on titles.
Symbol Description
For Recording, Playing Back, and Editing
Deleting parts of titles:
Description refers to (internal) HDD
You can delete a specific part of a title.
Dividing or combining titles:
You can divide or combine a title.
Description refers to DVD-RW in video mode
Editing title names:
You can change the title name you prefer.
Description refers to DVD-RW in VR mode
Description refers to DVD-R in video mode
For Playback only
Compatibility
Available for playing back discs on a regular DVD
player:
Description refers to DVD-video
Recorded discs can be played back on regular DVD
players, including computer DVD drives compatible with
DVD-video playback.
Description refers to audio CD
Description refers to CD-RW/-R with MP3 files
Description refers to CD-RW/-R with JPEG files
(Kodak Picture CD files included)
Others
HDD
DVD
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Progressive scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television signals.
HDMI (High-Definition Multimedia Interface)
You can enjoy clearer audio/video output when
connecting this unit to a display device with an HDMI-
compatible port.
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Discs for Recording, Playing back
Disc type
Logo
DVD-RW
DVD-R
HDD
Can be formatted in VR or video
mode
Automatically
formatted in video mode
_
Format
Video Mode
VR Mode
Icon
Maximum record 480 min (12cm) 480 min (12cm)
480 min (12cm)
144 min (8cm)
240 hrs
(with SLP mode)
time 144 min (8cm)
144 min (8cm)
Ver.2.0
Ver.1.1,1.2
Recordable/playable
Ver.2.0/4×
Ver.2.0/8×
Ver2.0/16×
_
Ver.1.1/2× CPRM compatible
versions
Ver.1.2/4× CPRM compatible
Playable on
Playable only
most DVD
on VR mode
players.
Playable on most DVD
players.
Finalization necessary.
(title menu will be
created)
compatible
_
Compatibility Finalization
necessary.
unit.
Finalization
recommended.
(title menu will
be created)
Recording Features
Record TV
✓
✓
✓
✓
✓
✓
programs
Reuse by deleting
the current
contents
✓
✓
Record 16:9 size
pictures
✓
✓
✓
✓
✓
Record copy-once
programs
✓*
Create chapters
at fixed intervals
(auto chapter)
✓
✓
✓
✓
Editing Features
Scene delete
Playlist Original
Playlist
Original
✓
✓
✓
✓
Edit title name
✓
✓
✓
✓
✓
✓
✓
Create chapters
wherever you like
(chapter mark)
✓
✓
✓
✓
Divide a title
Combine titles
Delete a title
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Deleting selected
titles
✓
Create a playlist
Protect a title
✓
✓
✓
✓
✓: Available
Gray: Not available
*CPRM compatible disc only.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Discs for playing back
DVD-VIDEO
Disc Type
Logo
CD-DA
CD-RW
CD-R
Icon
Files for playing back
MP3
Type of title
Icon
JPEG
Media
CD-RW/-R
CD-RW/-R
is a trademark of DVD Format/Logo Licensing Corporation. Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
Unplayable Discs
However, depending on the media condition, the unit
may not read the disc properly.
The following discs will not play back on this unit.
• CD-ROM • Compact Disc-Interactive (CD-I)
• Video Single Disc (VSD) • DVD-ROM
Verbatim DVD-R 8x, DVD-RW 2x
JVC
Maxell
DVD-RW 4x
DVD-R 8x/16x
Performance of any other discs are not guaranteed.
• DVD-audio
• Unfinalized disc
• DVD contains MP3 or JPEG files
• DVD-RW/-R recorded in non compatible recording format
DVD players with
recorded in VR mode.
are capable of playing DVD-RW
• Blu-ray Disc
• HD DVD
• Super Video CD
On the following disc, the sound may not be heard.
• Super audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density super audio CD
layer cannot be heard.
Color Systems
DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.
Region Codes
This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you
cannot play back the DVD in this unit.
The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel
1
2*
3
4
5
6* 7
DV-IN
14
13
12 11
10 9 8
( ) The unit can also be turned on by pressing these buttons.
*
1. Disc tray
10.AUDIO input jacks (L2)
Place a disc when the disc tray is opened.
2. A OPEN/CLOSE button*
Press to open or close the disc tray.
3. HDD button
Use to connect external device with an RCA audio
cable.
11.VIDEO input jack (L2)
Use to connect external device with an RCA video
cable.
Press to select the HDD output mode.
4. DVD button
12.S-VIDEO input jack (L2)
Use to connect the S-video output of external device
with an S-video cable.
Press to select the DVD output mode.
5. C STOP button
13.Infrared sensor window
Press to stop playback or recording.
6. B PLAY button*
Receive signals from your remote control so that you
can control the unit from a distance.
14.Display
Press to start or resume playback.
7. I REC/OTR button
Refer to “Front Panel Display” on page 16.
Press once to start a recording. Press repeatedly to
start one-touch timer recording.
8. y POWER button
Press to turn the unit on and off.
9. DV-IN jack (L3)
Use to connect the DV output of external device with
a DV cable.
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Rear Panel
4
1
2
3
5
VIDEO VIDEO
IN OUT
Y
IN
L
L
OUT
R
R
IN
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
12 11 10 9
8
7
6
1. ANTENNA IN jack
8. COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with a component video cable.
9. AUDIO OUT jacks
Use to connect an antenna.
2. VIDEO IN jack (L1)
Use to connect external device with an RCA video
cable.
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
10.S-VIDEO IN jack (L1)
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
Use to connect the S-video output of external device
with an S-video cable.
4. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
11.AUDIO IN jacks (L1)
Use to connect external device with an RCA audio
cable.
5. AC Power Cord
Connect to a standard AC outlet to supply power to
this unit.
12.ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
6. COAXIAL DIGITAL AUDIO OUTPUT jack
Use to connect an AV receiver, Dolby Digital decoder,
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
7. S-VIDEO OUT jack
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
• This unit does not have the RF modulator.
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Remote Control
Installing the Batteries in the Remote Control
Using a Remote Control
Install the batteries (AAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the followings when using the remote
control:
Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.
•
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
Open the cover.
1
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight: approx. 23 feet (7m)
- Either side of the center:
Insert batteries.
approx. 16 feet (5m) within 30°
- Above: approx. 16 feet (5m) within 15°
- Below: approx. 10 feet (3m) within 30°
2
30˚
30˚
16feet (5m)
23feet (7m)
16feet (5m)
Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.
17
1
2
Close the cover.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
18*
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
3
CH
19
3
4
PQRS
WXYZ
CLEAR
20
21
SETUP
AUDIO REPEAT
HDMI
5
6
22
27
MENU/LIST
TOP MENU
7
8
9
23
Caution:
ENTER
24
25
Never throw batteries into a fire.
Note:
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
• Be sure to use AA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace
batteries with new ones.
10
11
26
28
29
PLAY
12
13*
BX1.3/0.8
STOP
PAUSE
DVD
14
DUBBING
30
32
34
HDD
15
16
31
33
TIMER PROG.
REC MODE REC/OTR
• When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.
• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
( ) The unit can also be turned on by pressing these buttons.
*
1. DTV/TV button
Press to switch between digital TV (DTV) mode and
analog TV (TV) mode.
17.INPUT SELECT button
Press to select the appropriate input.
18.OPEN/CLOSE A button*
2. POWER button
Press to open or close the disc tray.
Press to turn the unit on and off.
3. Number/Character buttons
• Press to select channel numbers.
• Press to select a title/chapter/track/file on display.
• Press to enter values for the settings in the main
menu.
19.CH
/
buttons
Press to change the channel up and down.
20.CLEAR button
Press to clear the password once entered, to clear
the marker settings or to cancel the programming
for CD, etc.
• Press to enter title names.
21.HDMI button
4. Confirm ( − ) button
Analog mode:
Press to confirm the channel selection made by
[the Number buttons].
Digital mode:
Press to confirm the major / minor channel
selection made by [the Number buttons].
5. SETUP button
Press to set the HDMI connector’s video signal
output mode .
22.REPEAT button
Press to display the repeat menu.
23.TOP MENU button
Press to display the title list.
24.ENTER button
Press to confirm or select menu items.
• Press to display the main menu.
• During HDD or DVD playback, press and hold for
more than 3 seconds to switch the progressive
scanning mode to the interlace mode.
6. AUDIO button
• Press to switch the audio language for digital TV.
• Press to display the audio menu during playback.
7. MENU/LIST button
Press to display the disc menu. To change original
and playlist on the TV screen.
8. Cursor K / L / { / B buttons
Press to select items or settings.
9. DISPLAY button
25.RETURN
button
Press to return to the previous displayed menu
screen.
26.SKIP G button
• During playback, press to skip to the next chapter,
track or file.
• When playback is in pause, press repeatedly to
forward the playback step by step.
27.VARIABLE SKIP
Press to skip by the amount of time set in advance.
28.FWD D button
button
• During playback, press to fast forward playback.
• When playback is in pause, press to slow forward
playback.
Press to display the display menu on or off.
10.SKIP H button
29.PAUSE F button
Press to pause playback or recording.
30.STOP C button
• During playback, press to return to the beginning of
the current chapter, track or file.
• When playback is in pause, press repeatedly to
reverse the playback step by step.
11.VARIABLE REPLAY button
Press to replay by the amount of time set in advance.
12.REV E button
• Press to stop playback or recording.
• Press to exit from the title list.
31.DVD button
Press to activate DVD.
32.HDD button
Press to activate HDD.
33.REC/OTR button
• During playback, press to fast reverse playback.
• When playback is in pause, press to slow reverse
playback.
• Press once to start a recording.
• Press repeatedly to start the one-touch timer
recording.
13.PLAY B button*
Press to start playback or resume playback.
14.Bx1.3/0.8 button
During playback, press to play back in a slightly
faster/slower while keeping the sound output.
15.DUBBING button
34.REC MODE button
Press to switch the recording mode.
• During playback, press to start dubbing right away.
• In stop mode, press to display “Dubbing” menu.
16.TIMER PROG. button
Press to display the timer programming list.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
Front Panel Display
2
3
DTV BS CS
DR
CD
1
PM
VCR
4
DB
5
1.
4. Current status of the unit
5. Displays the following
: Appears in the afternoon
with the clock display.
• Elapsed playback time
• Current title / chapter / track
number
• Recording time / remaining time
• Clock
• Channel number
• Remaining time for one-touch
timer recording
• Selected HDMI output mode
: Appears when playback is
paused.
PM
2.
: Appears when playing back
an HDD or a disc.
: Appears when the channel
is in DTV mode.
: Appears when the timer
programming or OTR has
been set and is proceeding.
: Flashes when timer
programming was not
executed because of some
error.
3. Title / track and chapter mark
: Appears when indicating a
title / track number.
: Appears when indicating a
chapter number.
: Appears during recording
process.
: Flashes when a recording
pauses.
: Appears when a disc is in
this unit.
: Appears during dubbing.
DB
Display Message
Appears when the disc tray is
opening.
Appears when HDMI output
mode (480p) is selected.
Appears when HDMI output
mode (720p) is selected.
Appears when the disc tray is
closing.
Appears when a disc is loaded
on the disc tray.
Appears when HDMI output
mode (1080i) is selected.
Appears when data is being
recorded on a disc.
Appears when HDMI output
mode (1080p) is selected.
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA CABLE CONNECTION
This section describes how to connect your unit to an antenna, cable box, etc.
Disconnect the power cord of your TV from the AC outlet.
1
2
Disconnect RF coaxial cable from antenna input jack of your TV.
rear of your TV
VHF / UHF
antenna
2
1
disconnect
disconnect
or
ANT. IN
RF coaxial cable
cable TV
company
Connect cables to the unit.
Make the basic connection as illustrated below.
3
VHF / UHF
antenna
rear of this unit
VIDEO VIDEO
IN
OUT
L
L
R
R
IN
AUDIO IN
(L1)
S-VIDEO AUDIO OUT
RF coaxial
cable
IN
VIDEO
OUT
or
L
cable TV
company
OUT
rear of your TV
RCA video
cable
R
ANTENNA
AUDIO OUT
This connection is for
TV loop through only
RCA audio
cable
RF coaxial cable
ANT. IN
R
L
AUDIO IN VIDEO IN
Plug in the power cord of this unit and your TV to the AC outlet.
4
rear of your TV
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
connect
*Once connections are completed, turn on the TV and
initial setting begin.
Channel scanning is necessary for the unit to memorize
all available channels in your area.
(Refer to “INITIAL SETTING” on page 27.)
rear of this unit
Note
• For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack
before moving the unit.
• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be
more effective than set-top versions.
• RF output is for tuner pass through only. HDD/DVD playback through the RF is not possible.
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
RF MODULATOR CONNECTION
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF
modulator. In this case, follow the instructions below.
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area.
If your RF modulator has a Modulator/Antenna switch, set it according to the manual supplied with the RF
modulator.
4) Plug in the power cords of the devices to the AC outlet.
5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch.
For more details, follow the manual supplied with the RF modulator.
VHF / UHF
antenna
rear of this unit
VIDEO VIDEO
Y
IN
OUT
IN
L
OUT
R
IN
S-VIDEO AUDIO OUT
COAXIAL
AUDIO IN
(L1)
ANTENNA
RF coaxial
cable
IN
VIDEO
OUT
RCA video
cable
or
L
cable TV
company
OUT
rear of your TV
R
ANTENNA
AUDIO OUT
RCA audio cable
ANT. IN
rear of your RF modulator
(not supplied)
RF coaxial cable
RF coaxial cable
3
4
R
L
ANT. IN CHANNEL
AUDIO IN VIDEO IN TO TV
Set channel 3 or 4
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• The quality of picture may become poor if this unit is connected to an RF modulator.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A CABLE / SATELLITE BOX
1) Disconnect the power cords of the devices from the AC outlet.
2) Make the connection as illustrated below.
3) Plug in the power cords of the devices to the AC outlet.
e.g.)
rear of your TV
satellite
dish
This connection is for
TV loop through only
VIDEO IN AUDIO IN
R
L
or
ANT. IN
cable TV
company
RCA audio
cable
RF coaxial
cable
RCA video
cable
rear of this unit
RF coaxial cable
VIDEO VIDEO
Y
IN
OUT
IN
L
OUT
R
R
IN
S-VIDEO AUDIO OUT
OUT
COAXIAL
AUDIO IN
ANTENNA
S-VIDEO
(
)
L1
RF coaxial cable
IN
ANT. IN RF OUT
VIDEO VIDEO
IN
OUT
Y
OUT
cable/satellite
box
L
L
VIDEO
OUT
S-VIDEO
OUT
AUDIO OUT
R
L
ANTENNA
R
R
IN
OUT
S-VIDEO
AUDIO IN
S-VIDEO AUDIO OUT
(
)
L1
or
RCA video cable
RCA audio cable
S-video cable
Supplied cables used in this connection are as follows:
• RF coaxial cable x 1
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
Note
• Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.
• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUTPUT
jacks, or HDMI OUT jack (no AUDIO OUT jack connection required) for connecting to your TV.
With this setup:
• You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the
cable/satellite box is turned on.
• You cannot record one channel while watching another channel.
Note to CATV system installer
• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A TV
Make one of the following connections, depending on the capabilities of your display device.
Method 1
Method 2
Method 3
analog audio
standard picture
good picture
better picture
TV
VIDEO
IN
COMPONENT
VIDEO IN
S-VIDEO IN
AUDIO IN
Y
(Green)
R
L
PB/CB
(Blue)
PR/CR
(Red)
RCA
video cable
S-video cable
RCA
audio cable
component
video cable
and
or
or
(Green)
VIDEO
OUT
Y
VIDEO
OUT
this unit
L
L
(Blue)
(Red)
VIDEO VIDEO
IN
OUT
IN
L
L
OUT
OUT
S-VIDEO
R
R
IN
AUDIO IN
R
ANTENNA
S-VIDEO AUDIO OUT
(
)
L1
R
AUDIO OUT
AUDIO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
COMPONENT
VIDEO OUTPUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.
After you have completed the connections
• Switch the input selector on your TV to an appropriate external input channel. Press a button on the TV’s original
remote control that selects an external input channel until the DVD recorder’s opening picture appears. Check your
TV owner’s manual for details.
Note
• Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
• Progressive signal does not output from the VIDEO OUT or S-VIDEO OUT jack.
To set progressive scan mode, refer to page 102
• This unit is compatible with the progressive scan system. The feature provides you the higher quality images than the
traditional output system. To utilize this feature, you must set “Progressive” to “ON”.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT
A simple 1-cable connection with a device having an
HDMI (high-definition multimedia interface) connector
HDMI Mode and Actual Output Signals
Press [HDMI] to select the HDMI output mode. The
output mode changes as follows every time [HDMI] is
pressed.
allows digital transfer of both digital video signals and
multi-channel audio signals.
TV
HDMI IN
Front Panel Display Video Output Signal
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
HDMI cable
1080 interlaced
Press [HDMI]
this unit
1080 Progressive
Press [HDMI]
HDMI OUT
When connecting with an HDMI cable, the audio signal
will be output as the digital audio signal simultaneously,
so you do not need the analog audio connection
described on page 20.
• The HDMI mode that is not supported by display
device will be skipped.
Cables not included.
Please purchase the necessary cables at your local
store.
Actual Output Modes by Media
Audio recording format of the disc
Dolby Digital setting of this unit
Actual output
2channel PCM
Dolby Digital
PCM
Dolby Digital
Stream
DVD-video
PCM
LPCM
2channel PCM
Stream
For audio CD and MP3 files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select
“Stream” in “Dolby Digital” setting (Refer to page 97).
Copyright protection system
To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital
content protection system). HDCP is copy protection technology that comprises data encryption and authentication
of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device
(or AV amplifier) for more information.
*HDMI: High Definition Multimedia Interface
Note
• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate
properly with this unit.
• When using an HDCP-incompatible display device, the image will not be viewed properly.
• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however,
this unit cannot be controlled by another device via the HDMI connector.
• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit
length) maybe limited by the device that is connected.
• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output connector.
• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI-
DVI converter cable, the signals are output in digital RGB.
• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.
Please check and set the HDMI setting again.
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTION TO AN AUDIO SYSTEM
• When you change the connections, all devices should be turned off.
• Refer to the owner’s manual accompanying external devices for more information.
Playing Back 2 Channel Analog Audio
stereo system
Playing Back Multi Channel Digital Audio
Dolby Digital decoder
COAXIAL
AUDIO IN
audio
R
L
digital audio
coaxial input jack
analog audio
input jacks
RCA audio cable
digital audio coaxial cable
VIDEO
OUT
L
VIDEO VIDEO
Y
VIDEO VIDEO
IN OUT
IN
OUT
IN
IN
L
L
L
L
this unit
OUT
OUT
R
R
R
R
IN
OUT
IN
COAXIAL
AUDIO IN
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
ANTENNA
S-VIDEO AUDIO OUT
( )
L1
(
)
L1
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
R
AUDIO OUT
AUDIO OUT
DIGITAL AUDIO OUTPUT
*MD deck or DAT deck can be also connected through coaxial jack.
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Multi Channel Digital Audio Setting
Setting
Setup >General Setting >Playback >Audio Out >
Connection
Dolby Digital
If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder.
Stream
Connecting to an MD deck or DAT deck.
If not connected to any external devices.
PCM
PCM
* To complete these settings, refer to page 97.
Note
• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.
• Playing back a HDD/DVD using incorrect settings may generate noise distortion and may also damage the
speakers.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference.
Guide to On-Screen Displays and Menus
The on-screen display changes in the following order
DTV Program Guide
as you press [DISPLAY].
1
2
3
4
5
6
7
8
OFF
PROGRAM TITLE NAME
123-45
WLIW-DT
ENGLISH
90
TV-PG
INFORMATION-1
INFORMATION-2
INFORMATION-3
INFORMATION-4
INFORMATION-5
INFORMATION-6
DTV Program Guide (only in DTV mode)
Autostart Recording Information
(only in HDD mode with no titles are playing back)
Disc Information/Menu
1. Program title (max. 2 lines displayed)
2. Closed Caption (Indicates that the program being
broadcast is available with closed captioning.)
3. Signal strength (Indicates the signal strength of the
current channel.)
4. Program guide (max. 6 lines displayed)
5. Channel number
Title Name Information
(only when HDD, VR mode DVD-RW or
unfinalized Video mode DVD-RW/-R is in playback)
or
File Name Information
(only when a CD with MP3/JPEG/Kodak Picture CD files
6. Broadcast station
is in playback)
7. Audio language (“Other” is displayed when the
audio language cannot be acquired, or the acquired
languages are other than English, Spanish or French.)
8. Program rating
MP3 Tag Information
(only when a MP3 file is in playback)
Note
HDMI Information
• When the program guide is displayed in more than 6
lines, use [K / L] to scroll.
(only for the images output through the HDMI output)
• “No description provided.” is displayed when the
program guide is not provided.
Autostart Recording Information
7
2:59:44 / 3:31:31
ORG
CH 10
5
6
7:10AM
10:42AM
41
4
10:10AM
42 43
1. Starting time of the autostart recording
2. Status of the time autostart recording
Live: Indicates when watching live TV
B
: Indicates when playing back the autostart recording.
3. The time that the picture currently displayed on the
screen is broadcasted
4. Current time
5. The progress of the autostart recording
6. Current point of the playback of the autostart recording
7. Elapsed time of the playback of the autostart recording
/ total time of the autostart recording
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Title/File Name Information
Title name information
Title Name
My Title
File name information
File Name
My File
MP3 Tag Information
• If you press [DISPLAY] one more time, album name
will be displayed.
Album Name
• If there is no artist, track or album name, “Not Available”
will be displayed.
HDMI Information
1
2
Video Info.
Audio Info.
:
:
480p
Bitstream
/
YCbCr
3
4
*1. Indicates the resolution of the HDMI output image.
*2. Indicates the HDMI video format.
*3. Indicates the HDMI audio format.
4. Indicates current disc status.
* “- - -” will be displayed, when it does not have any
information.
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Main Menu
Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [ENTER] to display the
menu. These menus provide entries to all main functions
of the unit.
1. General Setting:
To go to general setting menu.
2. Timer Programming:
To program a timer recording.
3. Title List:
To call up the title list.
4. DVD Menu:
To set up the DVD setting.
5. HDD Menu:
To set up the HDD setting.
6. Dubbing:
Setup
General Setting
1
Timer Programming
2
Title List
DVD Menu
• To dub the content of the HDD to DVD or vice versa.
• “Dubbing” is available only when a recordable disc is
loaded.
HDD Menu
45
Dubbing
46
CD Playback Mode
47
7. CD Playback Mode:
To set up the CD playback setting.
• “CD Playback Mode” is available only when an audio
CD, a CD-RW/-R with MP3/JPEG/Kodak Picture CD files
is inserted into the unit.
General Setting
1. Playback:
To set up the unit to play back discs as you prefer.
2. Display:
To set up the OSD screen as you prefer.
3. Video:
To set up the video setting.
4. Recording:
To set up the unit to record to discs as you prefer.
5. Clock:
To set up the clock of the unit as you need.
6. Channel:
General Setting
1
2
3
4
5
26
37
48
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
To adjust the channel setting of the unit as you prefer.
7. HDMI:
To set up the HDMI connection setting.
8. Reset All:
To reset the setting to the factory default.
DVD Menu / HDD Menu / Dubbing / CD Playback Mode
1. Format (DVD-RW only):
<DVD Menu menu>
DVD Menu
Allows you to format the disc.
2. Finalize:
1
2
3
4
Format
Finalize
Allows you to finalize a disc containing recorded titles.
3. Disc Protect (VR mode DVD-RW only):
Allows you to protect a disc from accidental editing or
recording.
Disc Protect OFF
Delete All Playlists
ON
4. Delete All Playlists (VR mode DVD-RW only):
Allows you to delete playlist.
5. Random Play:
<CD Playback Mode menu>
CD Playback Mode
15
26
37
Allows you to activate the random playback feature.
6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.
7. Slide Show: (JPEG/Kodak Picture CD files only)
Allows you to select the display time of the slide show
mode.
Random Play
Program Play
Slide Show
<HDD Menu>
HDD Menu
8. Delete All Titles:
18
29
10
1
Delete All Titles
Delete All Unprotected Titles
Delete All Playlists
Allows you to delete all titles, including the protected
titles, in the HDD title list.
9. Delete All Unprotected Titles:
Allows you to delete all unprotected titles in the HDD
title list.
10. Delete All Playlists:
Allows you to delete all Playlists for HDD.
11. HDD DVD:
<Dubbing menu>
Dubbing
1
1
1
HDD
DVD
DVD
HDD
122
Allows you to dub from HDD to DVD.
12. DVD HDD:
Allows you to dub from DVD to HDD.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU START
Switching HDD / DVD Mode
Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode)
you wish to operate.
HDD mode
DVD mode
Press [HDD] to activate the HDD component.
Press [DVD] to activate the DVD component.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
DVD button
HDD button
REPLAY
SKIP
PLAY
HDD button
DVD button
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTING
Turn on this unit for the first time, you need to follow these steps.
Press [POWER].
Before:
1
2
Turn on the TV. Select the input to
which the unit is connected.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [K / L] to select your desired
language, then press [ENTER] to set
language.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
Initial Setting
PQRS
WXYZ
CLEAR
OSD Language
English
Français
Español
SETUP
AUDIO REPEAT
HDMI
Use [K / L] to select the desired
channel preset type then press
[ENTER].
MENU/LIST
TOP MENU
3
Initial Setting
ENTER
DISPLAY
SKIP
RETURN
SKIP
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
VARIABLE
REPLAY
SKIP
Air
Cable
PLAY
The unit will start getting channels available in
your area.
Air:
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
(When using antenna)
The channels broadcasted in TV and DTV are
automatically scanned and memorized. Only the
receivable channels in the area where this TV is
used will be memorized.
TIMER PROG.
REC MODE REC/OTR
Cable:
(When using basic cable)
The channels broadcasted in CATV are
automatically scanned and memorized.
CH
1
Auto Presetting Now
Press [ENTER] to activate “Clock
Setting”.
Initial Setting
Input Mode Names for Common TV Brands (Example)
4
5
Admiral AUX
Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
Curtis
LINE1, LINE2,
00, 90, 91, 92, 93
Clock Setting
Mathis
00, 90, 91, 92, 93
- - -
/
- -
/
- - - - ( - - - )
- - - - - -
:
GE
INPUT, TV/VCR, Samsung TV/VIDEO
00, 90, 91, 92, 93
Proceed to step 5 in “Manual Clock
Setting” on page 32.
• If a PBS (public broadcasting station) is
available in your area, press [RETURN
[SETUP] to exit, then follow “Auto Clock
Setting” on page 31.
Hitachi
JVC
INPUT, AUX
VIDEO, VIDEO 1, Sharp
VIDEO 2, VIDEO 3
Sanyo
VIDEO
00
Kenwood AUX
Sony
VIDEO1, VIDEO2,
VIDEO3
] or
LXI-Series 00
Magnavox AUX CHANNEL
Toshiba
Zenith
TV/GAME
00
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
If you have changed antenna connection, we recommend that you program channels available in your area with the
following procedures.
Auto Channel Scan
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
1
2
3
4
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Channel”, then
press [ENTER].
“Channel” menu will appear.
CH
PQRS
WXYZ
CLEAR
Use [K / L] to select “Auto Preset”,
then press [ENTER].
SETUP
AUDIO REPEAT
HDMI
Use [K / L] to select the type of
broadcasting signal, then press
[ENTER].
MENU/LIST
TOP MENU
ENTER
General Setting
DISPLAY
SKIP
RETURN
SKIP
Playback
Display
Video
Recording
Clock
Channel
HDMI
Auto Preset
set
lect
Auto Preset
VARIABLE
REPLAY
SKIP
Air
Cable
Cable (Extended Scan)
PLAY
Reset All
B
X
1.3/0.8
STOP
PAUSE
DVD
The unit will start getting channels available in
your area.
Air:
DUBBING
HDD
(When using antenna)
TIMER PROG.
REC MODE REC/OTR
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable:
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Extended Scan):
(When using basic cable)
The channels broadcasted in analog CATV and
digital CATV are automatically scanned and
memorized.
To cancel the auto channel preset during
scanning:
Press [RETURN
] or [SETUP] to cancel.
When scanning is over, press [SETUP]
to exit.
5
Note
• If the auto channel preset is canceled during
presetting, some channels not yet preset may not be
received.
To cycle through only the memorized channels, use
[CH
/
].
To select a channel directly (including the ones not
memorized), use [the Number buttons] and [-] (for
digital TV channels).
• The selection will depend on how you receive the TV
channels.
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
Adding/Deleting Channels
You may want to add or delete TV channels if your
channel lineup changes or if you no longer watch some
channels.
Adding channels is only available for the analog TV
channels.
Press [DTV/TV] to select the mode
(DTV or TV) to/from which you want
to add or delete channels.
1
2
3
4
Make sure
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
• You perform “Auto Channel Scan” before adding or
deleting the channels.
Use [K / L] to select “Channel”, then
press [ENTER].
“Channel” menu will appear.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “Manual Preset”,
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
then press [ENTER].
“Manual Preset” menu will appear.
• If you are adding or deleting analog TV
CH
PQRS
WXYZ
CLEAR
channels, go to
continue.
on page 30 to
ANALOG
• If you are deleting digital TV channels, go to
on page 30 to continue
DIGITAL
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
PLAY
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Instructions continue on the next page.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANNEL SETTING
ANALOG
DIGITAL
Select the channel number to add or
delete.
Select the channel number to delete.
• Only the major channel is displayed in “Manual
Preset” menu. (The channel number displayed
in the parenthesis is a virtual channel number)
• Use [CH
/
] to cycle through only the
5
5
6
memorized channels.
• Use [CH
/
] to cycle through only the
• Use [{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected,
“Delete” is checked and highlighted as a
default.
memorized channels.
• You cannot use [{ / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
Use [K / L] to select “Delete”, then
press [ENTER]. Then select the next
channel to delete.
Use [K / L] to select “Add” or
“Delete”, then press [ENTER].
Manual Preset
6
7
• If the setting is complete, press [RETURN
]
to activate “Manual Preset”.
CH
2
Manual Preset
Add
Delete
(
CH - - -
)
DTV
Add
2
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
Delete
Your setting will be activated.
Press [SETUP] to exit.
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
Press [SETUP] to exit.
7
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area,
follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 32.
Auto Clock Setting
This unit can set the time and date automatically by
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
referring to a PBS station.
Make sure
• The antenna/cable TV connections are correct.
• Channels are set. (Refer to pages 28-30.)
• If this unit is connected to a cable/satellite box,
select the local PBS station on them to set the clock
automatically.
1
2
3
4
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
Use [K / L] to select “Auto Clock
Setting”, then press [ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Auto”, then
press [ENTER].
CH
General Setting
PQRS
WXYZ
CLEAR
Playback
Display
Video
Recording
Clock
Channel
HDMI
Clock Setting
Auto Clock Settng
Auto Clock Setting
ime
OFF
Auto
Manual
SETUP
AUDIO REPEAT
HDMI
Reset All
MENU/LIST
TOP MENU
Press [SETUP] to exit.
ENTER
5
6
DISPLAY
SKIP
RETURN
SKIP
Press [POWER] to turn off the unit.
This unit will search for the time only when the
power is off. Leave it off for several minutes to
give this unit time to set the clock.
VARIABLE
REPLAY
SKIP
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
If the unit chooses an incorrect PBS channel, set the PBS
channel manually by following the steps below.
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Select “Manual” at step 4, then press
[ENTER].
1
2
Use [the Number buttons] or [K / L]
to enter your PBS channel number,
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Clock Setting
g
Auto Clock Setting
Note
ime
Set Channel No.
• The unit receives the clock data at 12:00 a.m/p.m
from the PBS channel when the power is off.
CH
1
Reset All
• The clock may set itself automatically after this unit
receive the antenna/cable signal and plug in the
power cord.
• Only the analog PBS channel signal is effective for
auto clock setting.
Press [SETUP] to exit and turn off the
unit.
3
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CLOCK
Manual Clock Setting
Daylight Saving Time
When “Daylight Saving Time” is “ON”, the unit clock will
automatically adjust the time in order to fit the daylight
saving time.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
“ON (MAR - NOV)” has been selected as the default.
1
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
2
3
4
1
2
3
4
Use [K / L] to select “Clock Setting”,
then press [ENTER].
Use [K / L] to select “Clock”, then
press [ENTER].
“Clock” menu will appear.
Use [K / L] to select calendar or time,
then press [ENTER].
Use [K / L] to select “Daylight Saving
Time”, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Clock Setting
Auto Clock Setting
g Time
Clock Setting
Use [K / L] to select “ON (MAR -
NOV)”, “ON (APR - OCT)” or “OFF”,
then press [ENTER].
JAN / 01 / 2008 ( TUE )
12 : 00 AM
Reset All
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Clock Setting
tCSetting
Daylight Saving Time
ng Time
ON (MAR - NOV)
ON (APR - OCT)
OFF
Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[ENTER].
Reset All
5
ON (MAR - NOV):
General Setting
Move forward one hour on the second Sunday in
March and move back one hour on the first
Sunday in November.
Playback
Display
Video
Recording
Clock
Channel
HDMI
Clock Setting
Auo lock Seting
g Time
Clock Setting
JAN / 01 / 2008 ( TUE )
12 : 00 AM
ON (APR - OCT):
Move forward one hour on the first Sunday in
April and move back one hour on the last
Sunday in October.
Reset All
Your setting will be activated.
The clock start counting when you press
[ENTER].
Press [SETUP] to exit.
5
Press [SETUP] to exit.
6
Note
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2007
up to 2057.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Switching Analog Mode /
Channel Selection
Digital Mode
Select channels by using [CH
buttons] on remote control.
/
] or [the Number
You can easily switch between the analog TV (NTSC) and
digital TV (ATSC) with the remote control.
[CH
Use [CH
/
]
/
] to change the channel.
Press [DTV/TV] on the remote control.
[the Number buttons]
• The analog mode and digital mode switch alternately.
Press the channel number with [the Number buttons] to
select a channel you want to watch.
<Analog TV channels>
Enter the channel number with [the Number buttons] to
select a channel you want to watch.
For 1-digit number
Note
• When you switch from the analog mode to the
digital mode, it may take awhile until the digital
channel selection is completed. The following screen
is displayed while switching the mode.
e.g.) 2 ch:
[0] + [2], [2] + [-] or
[2] + leave it for 2 seconds.
For 2-digit number
DTV 2-1
e.g.) 25ch:
[2] + [5]
<Digital TV channels>
Now Scanning
Enter the major and minor channel number with [the
Number buttons] to select a channel you want to watch.
For 1-digit number
e.g.) 2-2 ch:
major channel
minor channel
[0] + [2] or [2] + [-]
[0] + [2], [2] + [-] or
[2] + leave it for 2 seconds.
For 2-digit number
e.g.) 35-16ch:
major channel
minor channel
[3] + [5]
[1] + [6]
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Note
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
About minor-channel broadcasting:
There may be different programs being broadcast on
minor channels through a single channel from ATSC. You
can watch each minor channel program being broadcast
by selecting one of the minor channels.
NTSC
ATSC
18:00
18:30
19:00
19:30
20:00
Smallest Smallest
CH
DTV4-1
CH
DTV4-1 DTV4-2 DTV4-3
CH4
Smallest
CH
DTV4-1
DTV4-3
Smallest
CH
DTV4-1 DTV4-2
: change automatically
: change manually by using [CH
/
]
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
This section describes how to switch the TV audio.
When you record a TV program, only output sound channel will be recorded.
Selecting TV Audio
Digital TV
Press [AUDIO] to cycle through
available audio languages.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
English 1/2
1
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
PQRS
WXYZ
CLEAR
• When you press [AUDIO], selected language
will be displayed on the TV screen.
SETUP
AUDIO REPEAT
HDMI
• Every time you press [AUDIO], the language
will be switched.
e.g.) English 1/3 → Spanish 2/3 → Other 3/3
MENU/LIST
TOP MENU
• Available languages differ depending on the
broadcast.
ENTER
• The information display will automatically
disappear.
• When you record digital TV broadcasting, the
audio language you have selected will be
recorded.
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
PLAY
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Note
• The timer recording for digital TV cannot record any
audio language other than English.
• [AUDIO] does not control external device audio.
• When there is only one audio channel on the
broadcast, pressing [AUDIO] does not display
anything.
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Selecting TV Audio (cont’d)
Analog TV
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
INPUT
OPEN/
1
2
3
4
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “Channel”, then
press [ENTER].
“Channel” menu will appear.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
PQRS
WXYZ
CLEAR
Use [K / L] to select “TV Audio
Select”, then press [ENTER].
SETUP
AUDIO REPEAT
HDMI
Use [K / L] to select “Stereo” or
“SAP”, then press [ENTER].
MENU/LIST
TOP MENU
General Setting
Playback
Display
Video
Recording
Clock
Auto Preset
Manual Preset
TV Audio Select
TV Audio Select
ENTER
DISPLAY
SKIP
RETURN
SKIP
Stereo
SAP
Channel
HDMI
VARIABLE
Reset All
REPLAY
SKIP
Stereo:
PLAY
Outputs main-audio.
SAP (secondary audio program):
Outputs sub-audio.
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
Press [SETUP] to exit.
TIMER PROG.
REC MODE REC/OTR
5
Note on recording analog TV channel audio
• When you record an analog TV program available in
second audio or stereo, you have to select either
“Stereo” or “SAP” in “Channel” menu beforehand.
Refer to the following table to check an appropriate
setting.
Selected
audio
Broadcast
audio
Disc
Audio
recording
output
Stereo
STEREO+SAP
STEREO
STEREO
STEREO
MONO
MONO
SAP
STEREO
STEREO
MONO
MONO
SAP
MONO+SAP
MONO
SAP
STEREO+SAP
STEREO
STEREO
SAP
STEREO
SAP
MONO+SAP
MONO
MONO
MONO
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
DTV Closed Caption
Digital TV
Apart from closed captions, Digital TV has its own closed captions called DTV CC. Use this menu to change the settings
for DTV CC.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
INPUT
OPEN/
1
2
3
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Display”, then
press [ENTER].
CH
PQRS
WXYZ
CLEAR
Use [K / L] to select “DTV CC”, then
press [ENTER].
General Setting
SETUP
AUDIO REPEAT
HDMI
Playback
Display
Video
Recording
Clock
OSD Language
Screen Saver
FL Dimmer
DTV CC
MENU/LIST
TOP MENU
Channel
HDMI
CC Style
V-Chip
Reset All
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
Use [K / L] to select “Caption Service”,
then press [ENTER].
PLAY
4
5
General Setting
B
X
1.3/0.8
STOP
PAUSE
DVD
Playback
Display
Video
OSD Language
Screen Saver
i
Recording
Clock
Channel
HDMI
DTV CC
DUBBING
HDD
Caption Service
Recording
Reset All
TIMER PROG.
REC MODE REC/OTR
Use [K / L] to the desired DTV closed
caption, then press [ENTER].
General Setting
Playback
Display
Video
CaptionServiceuage
er
OFF
Recording
Clock
Channel
HDMI
Service1
Service2
Service3
Service4
Service5
Service6
Reset All
OFF:
Select if you do not want DTV CC. This is the
default.
Service 1 to Service 6:
Select one of these before changing any other
item in the closed caption menu. Choose
“Service 1” under normal circumstances.
Press [SETUP] to exit.
6
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Closed Caption Style
Digital TV
Digital TV can also change the style of its closed caption such as font, color or size, etc.
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
INPUT
OPEN/
1
2
3
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “Display”, then
press [ENTER].
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
PQRS
WXYZ
CLEAR
Use [K / L] to select “CC Style”, then
press [ENTER].
General Setting
SETUP
AUDIO REPEAT
HDMI
Playback
Display
Video
Recording
Clock
OSD Language
Screen Saver
FL Dimmer
DTV CC
MENU/LIST
TOP MENU
Channel
HDMI
CC Style
V-Chip
Reset All
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
Use [K / L] to select “User Setting”,
then press [ENTER].
General Setting
REPLAY
SKIP
PLAY
4
5
CC Style
Playback
B
X
1.3/0.8
STOP
PAUSE
DVD
Display
Video
Recording
Clock
Channel
HDMI
Reset All
age
User Setting
er
Font Size
Font Style
Font Opacity
DUBBING
HDD
Font Color
Edge Type
Edge Color
Back Opacity
Back Color
TIMER PROG.
REC MODE REC/OTR
Use [K / L] to select “ON”, then press
[ENTER].
General Setting
CC Style
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
age
User Setting
er
User Setting
ON
OFF
Edge Type
Edge Color
Back Opacity
Back Color
Instructions continue on the next page.
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SETTINGS
Use [K / L] to select the item and
switch the setting for each item you
want to set, then press [ENTER].
• When “User Setting” is set to “ON”, you can set
the following items. CC style set by “User
Setting” will be displayed.
<Edge Type>
Edge type of the displayed caption can be
switched as below.
6
General Setting
CC Style
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Edge Typeage
er
None
Raised
• The setting description for each item is shown
below.
Depressed
Uniform
L.Shadow
R.Shadow
Back Opacity
Back Color
<Font Size>
Font size of the displayed caption can be
switched as below.
<Edge Color>
General Setting
Edge color of the displayed caption can be
switched as below.
CC Style
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
ge
User Setting
r
Font Size
General Setting
Large
EdgeColor
Playback
Middle
Display
Video
Recording
Clock
Channel
HDMI
Reset All
age
Small
White
er
Black
Edge Color
Back Opacity
Back Color
Red
Green
Blue
Yellow
Magenta
Cyan
Back Color
<Font Style>
Font style of the displayed caption can be
switched as below.
<Back Opacity>
General Setting
Background opacity of the displayed caption can
be switched as below.
FontStyle
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
ge
Style1
r
Style2
General Setting
Style3
Style4
CC Style
Playback
Style5
age
Style6
Display
Video
Recording
Clock
Channel
HDMI
Reset All
UserSetting
er
Style7
Style8
Back Color
Back Opacity
Solid
Transparent
Translucent
Flash
Back Opacity
Back Color
<Font Opacity>
Font opacity of the displayed caption can be
switched as below.
<Back Color>
General Setting
Background color of the displayed caption can
be switched as below.
CC Style
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
ge
User Setting
r
Font Opacity
General Setting
Solid
BackColor
Playback
Transparent
Translucent
Display
Video
Recording
Clock
Channel
HDMI
Reset All
age
White
Flash
er
Black
Back Opacity
Back Color
Red
Green
Blue
Yellow
Magenta
Cyan
Back Color
<Font Color>
Font color of the displayed caption can be
switched as below.
General Setting
Press [SETUP] to exit.
Font Color
Playback
Display
Video
ge
White
r
Black
Recording
Clock
Channel
HDMI
Red
7
Green
Blue
Yellow
Reset All
Magenta
Cyan
Back Color
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
When inserting a brand-new DVD-RW, the unit automatically starts to initialize the disc. DVD-RW will be formatted
either video or VR mode according to the recording format mode setting of the unit. Before inserting a brand-new
DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it
has been used.
Press [SETUP].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
1
2
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “DVD Menu”,
then press [ENTER].
CH
Setup
General Setting
Timer Programming
Title List
PQRS
WXYZ
CLEAR
DVD Menu
HDD Menu
Dubbing
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
Use [K / L] to select “Format”, then
press [ENTER].
ENTER
DISPLAY
SKIP
RETURN
SKIP
3
4
DVD Menu
Format
Finalize
VARIABLE
REPLAY
SKIP
PLAY
Use [K / L] to select “Format Mode”,
then press [ENTER].
BX1.3/0.8
STOP
PAUSE
DVD
DUBBING
DVD Menu
HDD
Format
Finalize
Start
TIMER PROG.
REC MODE REC/OTR
Format Mode
Use [K / L] to select “Video mode” or
“VR mode”, then press [ENTER].
5
6
7
Press [SETUP] to exit.
Insert a brand-new disc.
Formatting will start.
Note
Formatting
90%
• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R.
Formatting is completed.
“100%” is indicated.
• You cannot mix two formats on one DVD-RW. If you
insert a disc that has been recorded before, the
recording format cannot be changed even if you
change it in the main menu.
8
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
FORMATTING A DISC
Reformatting a Disc Manually
If you are using a DVD-RW, you can format the disc by performing “Format”. You can format DVD-RW for either video
mode recording or VR mode recording.
Insert a recordable disc.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Press [SETUP].
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
1
2
CH
Use [K / L] to select “DVD Menu”,
then press [ENTER].
PQRS
WXYZ
CLEAR
Setup
General Setting
Timer Programming
Title List
SETUP
AUDIO REPEAT
HDMI
DVD Menu
HDD Menu
MENU/LIST
TOP MENU
Dubbing
ENTER
DISPLAY
SKIP
RETURN
SKIP
Use [K / L] to select “Format”, then
press [ENTER].
VARIABLE
REPLAY
SKIP
e.g.) VR mode DVD-RW
3
4
PLAY
DVD Menu
Format
Finalize
BX1.3/0.8
STOP
PAUSE
DVD
Disc Protect OFF
ON
Delete All Playlists
DUBBING
HDD
Use [K / L] to select “Start”, then
press [ENTER].
TIMER PROG.
REC MODE REC/OTR
DVD Menu
Format
Finalize
Start
Disc Protect OFF
Delete All Playlists
ON
Format Mode
Selection menu will appear and prompt you to
confirm.
Use [K / L] to select “Yes”, then press
[ENTER].
Formatting will start.
If you want to cancel formatting, select “No”.
5
DVD Menu
Format
Finalize
Start
Disc Protect OFF
Delete All Playl
ode
Are you sure?
Yes
No
Note
• When you reformat the disc, the contents of the disc
are erased.
• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 39.)
Formatting is completed.
“100%” is indicated.
6
Formatting
100%
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING A DISC TO PROTECT
To prevent accidental recording, editing or erasing the
titles, you can protect them from “DVD Menu” menu.
Press [SETUP].
1
2
3
Use [K / L] to select “DVD Menu”,
then press [ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Disc Protect
OFF ON”, then press [ENTER].
CH
DVD Menu
PQRS
WXYZ
CLEAR
Format
Finalize
Disc Protect OFF
ON
Delete All Playlists
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
Use [K / L] to select “Yes”, then press
[ENTER].
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
4
DVD Menu
REPLAY
SKIP
Format
Finalize
PLAY
Disc Protect OFF
Delete All Playl
Protect this disc?
Yes
No
BX1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
A disc will be protected.
This operation may take
awhile to be completed.
Note
To cancel the disc protect:
• When you insert a disc protected with this unit,
“Disc Protect ON OFF” will appear instead of “OFF
ON”.
DVD Menu
Format
Finalize
Disc Protect ON
OFF
Delete All Playlists
To release the protection for the disc, select “Disc
Protect ON OFF” at step 3, then follow rest of the
procedures.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Auto Finalizing
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.
1
2
3
4
Use [K / L] to select “Recording”,
then press [ENTER].
“Recording” menu will appear.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “Auto Finalize”,
then press [ENTER].
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
Use [K / L] to select “Disc Full” or
“End of Timer Rec”, then press
[ENTER].
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Auto Chapter
MENU/LIST
TOP MENU
Auto Finalize
Disc Full
End of Timer Rec
Reset All
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
Use [K / L] to select “ON”, then press
[ENTER].
PLAY
5
General Setting
B
X
1.3/0.8
STOP
PAUSE
DVD
Playback
Display
Video
Recording
Clock
Channel
HDMI
Auto Chapter
DUBBING
HDD
DiscFull
ON
OFF
TIMER PROG.
REC MODE REC/OTR
Reset All
General Setting
Playback
Display
Video
Recording
Clock
Auto Chapter
EndofTimerRec
ON
OFF
Channel
HDMI
Reset All
Your setting will be activated.
Press [SETUP] to exit.
6
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING THE DISCS IN OTHER DVD PLAYERS
Finalizing a Disc
Press [SETUP].
You will need to finalize discs to play back on other DVD
players.
Finalizing may take several minutes up to an hour.
Since the process of the finalization fills empty space of
the disc, a shorter recording period on the disc will
require a longer time period for finalization. Do not
unplug the power cord during finalization.
1
2
3
4
Use [K / L] to select “DVD Menu”,
then press [ENTER].
“DVD Menu“ menu will appear.
Use [K / L] to select “Finalize”, then
press [ENTER].
PQRS
TUV
WXYZ
CLEAR
Use [K / L] to select “Yes”, then press
[ENTER].
e.g.) VR mode DVD-RW
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
DVD Menu
Format
Finalize
ENTER
Disc Protect OFF
Delete All Playl
Finalize disc?
DISPLAY
SKIP
RETURN
SKIP
Yes
No
VARIABLE
REPLAY
SKIP
Finalizing will start.
PLAY
B
X
1.3/0.8
STOP
PAUSE
DVD
Finalizing
90%
DUBBING
HDD
This operation may take
awhile to be completed.
TIMER PROG.
REC MODE REC/OTR
Finalizing is completed.
5
Note
• Finalizing a disc in video mode automatically creates
a title menu.
To cancel finalizing...
(DVD-RW only)
Press [STOP C] during the finalizing is in progress. Use
[K / L] to select “Yes”, then press [ENTER]. Finalizing is
canceled and the unit switches to stop mode.
• Even after DVD-RW in VR mode is finalized, you can
still record or edit. After you finalize DVD-RW in video
mode or DVD-R, you cannot edit or record anything
else on that disc.
• If you insert a DVD-RW finalized with this unit, “Undo
Finalize” will appear instead of “Finalize” at step 3.
• To release the finalization of the DVD-RW disc, select
“Undo Finalize” at step 3.
Do you want to cancel ?
Yes
No
DVD Menu
Format
Undo Finalize
Disc Protect OFF
Delete All Playlists
ON
Finalizing
5%
If “ ” appears when [STOP C] is pressed, you cannot
cancel finalizing because the finalizing has already
reached a critical point in its process.
If “No” is selected and [ENTER] or [RETURN
pressed, finalizing is continued.
] is
• DO NOT power off during finalizing. This may result
in a malfunction.
You cannot cancel finalizing DVD-R once it has started.
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON RECORDING
Recording Mode
Restrictions on Recording
You can select a recording mode among 5 options, and
the recording time will depend on the recording mode
you select as follows.
You cannot record copy-protected program using this
unit. Copy-protected video signal is included in DVD-
videos, some satellite broadcasts, some pay-per-view
stations and some “premium” stations.
If copy-protected material is detected, recording will
pause or stop automatically and an error message
appears on the screen.
Recording time
Video/
Sound
Quality
Recording
mode
DVD
12cm
DVD
8cm
HDD
“Copy-once only” video can only be recorded to CPRM
compatible DVD-RW formatted in VR mode or internal
HDD.
XP
SP
60 min 18 min
120 min 36 min
30 hrs
60 hrs
LP
240 min 72 min 120 hrs
360 min 108 min 180 hrs
480 min 144 min 240 hrs
What is “CPRM”?
EP
CPRM is a copy protection system with scramble system
regarding the recording of “copy-once” broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This unit is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
make another copy of those recordings. CPRM recordings
can only be made on CPRM compatible DVD-RW format-
ted in VR mode, and CPRM recordings can only be played
back on DVD players that are specifically compatible with
CPRM.
SLP
• The recording times listed above are estimates and are
for reference purposes only. Actual recording times may
vary.
• The audio and video quality of content being recorded
may differ depending on the recording mode/recording
time chosen.
Note
• This unit cannot record to CD-RW or CD-R.
Making discs playable in other DVD players (Finalize)
For DVD-RW/-R, it is necessary to finalize the disc after
recording, in order to play back the disc on other DVD
players. (Refer to pages 42-43.) When video mode DVD-
RW/-R are finalized, a title menu is created. You cannot
finalize discs in other DVD recorders.
• All high definition pictures will be down converted to
the standard definition pictures when they are
recorded on this unit.
• DVD-RW/-R and CD-RW/-R recorded on a personal
computer or a DVD or CD recorder may not be
played back if the disc is damaged or dirty or if there
is condensation on the player’s lens.
• If you record a disc using a personal computer, even
if it is recorded in a compatible format it may not be
played back because of the settings of the
application software used to create the disc. (Check
with the software publisher for more detailed
information.)
• Discs recorded in video mode on this unit cannot
record additional information using other DVD
recorders.
About HDD
HDD is a special device which has high recording density
and is suited for long-time recording or high-speed
cueing but by contrast, has many factors which can cause
breakage. Use HDD on the premise that you should dub
the recorded program to a DVD disc to protect your
precious videos.
HDD is a temporary storage location:
HDD is not a permanent storage location of the recorded
contents. Be sure to use it as a temporary storage location
until you watch the program once, edit them, or dub
them to a DVD disc.
• Since the recording is made by the VBR (variable bit
rate) method, depending on the picture you are
recording, the actual remaining time for recording
may be a little shorter than the remaining time
displayed on the TV screen.
Be sure to dub (back up) data promptly if you find
abnormalities in HDD:
If there is mechanical trouble with the HDD, grinding or
other sounds may be heard or blocky noise may appear
on the image. If you continue to use as it is, deterioration
may continue and eventually the HDD may not be used
at all. If you notice these symptoms of a failing HDD,
promptly dub the data to a DVD disc.
When an HDD fails, recovery of recorded content (data)
may be impossible.
About the remaining capacity of HDD recording time:
In recording to HDD, the Remaining Capacity Display
may differ from the actual recordable time as this unit
adopts Variable Bit Rate encoding, which varies the
recording (storage) amount of data in conformity with
the information amount of video. Before recording to
the HDD, ensure there is sufficient space on the HDD
by deleting unnecessary titles in advance. (Remaining
capacity will not increase if you only delete Playlists.)
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR A RECORDING
Setting for Auto Chapter
Recording the DTV Closed Caption
You can set a specified time for chapter marks.
You can record the DTV Closed Caption as the part of the
image for the recording program and see the recorded
closed caption even with the TV that is not closed caption
compliant.
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
1) Press [SETUP] and use [K / L] to select “General
Setting”, then press [ENTER].
2) Use [K / L] to select “Recording”, then press [ENTER].
“Recording” menu will appear.
2) Use [K / L] to select “Display”, then press [ENTER].
3) Use [K / L] to select “Auto Chapter”, then press
[ENTER].
3) Use [K / L] to select “DTV CC”, then press [ENTER].
4) Use [K / L] to select a desired time option, then
press [ENTER].
4) Use [K / L] to select “Recording”, then press [ENTER].
• If the “Caption Service” is set to “OFF”, you cannot
select “Recording”.
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Auto Chapter
5) Use [K / L] to select “ON”, then press [ENTER].
Auto Chapter
OFF
General Setting
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Playback
Display
Video
Recording
Clock
Channel
HDMI
OSD Language
Screen Saver
Recording
D
ON
C
5) Press [SETUP] to exit.
OFF
R
Reset All
Note
• The interval for auto chapter may be up to two
minutes different from the time option you set.
6) Press [SETUP] to exit.
• A blank chapter may be created depending on the
remaining time of the disc.
Note
• If the “Caption Service” is set to “OFF”, the caption
will not be recorded.
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [POWER] to turn on the unit.
Follow the steps to record TV programs.
Turn on the TV and be sure to select the input to
which the unit is connected.
If you are recording to the HDD, press [HDD],
then proceed to step 5.
If you are recording to a disc, press [DVD].
1
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Press [OPEN/CLOSE A] to open the
disc tray.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
2
3
CH
Place the disc on the disc tray with its
label facing up. Be sure to align the
disc with the disc tray guide.
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
Align the disc to
the disc tray guide.
ENTER
DISPLAY
SKIP
RETURN
SKIP
Press [OPEN/CLOSE A] to close the
disc tray.
VARIABLE
REPLAY
SKIP
4
5
PLAY
B
X
1.3/0.8
STOP
PAUSE
DVD
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 44.
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
DVD SP
1:53
Press [DTV/TV] to select analog TV or
digital TV, then use [CH ] or
/
6
[the Number buttons] and [-] (for
digital TV channels) to select a
desired channel to record.
Refer to “Switching Analog Mode/Digital Mode”
and “Channel Selection“ on page 33.
CH 12
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
Press [REC/OTR] to start recording.
Press [STOP C] to stop recording.
The recorded title will be included in the title list.
(Refer to “Guide to a Title List” on page 76.)
The “I HDD” or “I DVD” mark will be displayed
on the TV screen briefly.
7
8
I DVD
Wait for a moment
90%
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC/OTR] again to restart
recording.
This operation may take
awhile to be completed.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC/OTR] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
I
0:30
0:30
(normal recording)
1:00
8:00
7:30
• To change the recording length during one-touch
timer recording, press [REC/OTR] repeatedly until the
desired length appears.
• To cancel one-touch timer recording within the
specified time, press [STOP C].
Note
• When you press [REC/OTR], recording starts immediately and continues until the HDD or disc is full, record 12
hours to HDD or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program onto HDD / DVD-RW/-R, you have to select the TV channel audio beforehand. Only
the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more details.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD
recording. And then follow the normal playback procedure.
• If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD]
or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power (One-touch timer recording will be canceled.).
- Using [REC/OTR] on the remote control.
• You cannot use the pause function during one-touch timer recording.
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOSTART RECORDING
The autostart recording will be stopped, cleared in
following cases:
- Turning off the power
- Start recording
- Editing titles or goes into editing menu
- Deleting tiles (DVD only)
- Start dubbing
- Changing input channels
- Using any functions in “DVD Menu” or “HDD Menu”
- Selecting following menus:
“General Setting” ➔ “Display” ➔ “V-Chip” ➔ “Downloadable Rating”
“General Setting” ➔ “Channel” ➔ “Auto Preset”
“General Setting” ➔ “Channel” ➔ “Manual Preset”
• The autostart recording will automatically resume for
new recording
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD (Autostart
recording). By using this function, you can pause or go
back the TV program you are currently watching, and you
can also start recording the whole TV program even at
the middle of the TV program. The temporary recording
can be made up to 6 hours of time range. If the recording
exceeds 6 hours, earliest recording will be overwritten.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
For how to playback the autostart recording, refer to
“Playing back the Autostart Recording” on page 70.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
Recording the Contents of the Autostart Recording
PQRS
WXYZ
CLEAR
When watching TV program through
this unit’s tuner, use
1
2
[SKIP H], [REV E] or
SETUP
AUDIO REPEAT
HDMI
[VARIABLE REPLAY ] to locate your
desired point to start recording.
• If you press [DISPLAY], the autostart recording
information will appear. Refer to page 23.
MENU/LIST
TOP MENU
ENTER
Press [REC/OTR] to start recording.
DISPLAY
SKIP
RETURN
SKIP
2:59:44 / 3:31:31
ORG
VARIABLE
REPLAY
SKIP
CH 10
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
7:10AM
10:42AM
10:10AM
DUBBING
HDD
From the selected point, the contents of the
autostart recording become a recording title in
the HDD while the unit continues to record the
current content of the channel.
TIMER PROG.
REC MODE REC/OTR
Press [STOP C] twice to stop
recording.
Note
3
1/100
1/
1
0:00:34 / 0:32:34
ORG
• In the autostart recording, when you display the DTV
program information, the information will be
recorded as the part of the picture.
CH 10
• When you record the contents of the autostart
recording, the recording mode is always SP.
• If there is not enough recordable space on HDD to
record from the selected point to current point, you
cannot record the content of autostart recording.
HDD
HDD SP
1:53
• When you record the content of the autostart
recording, the recording mode will be SP.
The recording stops and new autostart recording
begins.
• When you are recording the contents of the autostart
recording, if you record the part that is copy-protected,
“Copy guard detected.” appears and you are not able to
watch the part.
• If you press [STOP C] once, the image on the
TV screen goes back to current content of the
channel while the recording continues.
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Guide to Timer Programming Display
You can program the unit to record up to 36 programs
within one month in advance. Daily or weekly program
recordings are also available.
3
1
2
Timer Programming
JAN/ 2/08 12:00 AM 125-01 SP
SP (1:00)
Date
TUE JAN/01 10:00AM
End CH
Before recording, make sure
Start
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
JAN/02 12:00AM 1:00AM DTV 125- 1
New Program
1/1
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
4
5
1. Title of a Timer Program (Contains date, time, channel,
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
recording mode of the program)
2. Current date and time
3. Recording mode and length of the recording
4. Timer program list
CH
PQRS
WXYZ
CLEAR
5. Total number of pages and current page (6 pages maximum)
Press [TIMER PROG.].
SETUP
AUDIO REPEAT
HDMI
1
MENU/LIST
TOP MENU
Use [K / L] to select “New Program”,
then press [ENTER].
2
ENTER
Timer Programming
DISPLAY
SKIP
RETURN
SKIP
TUE JAN/01 10:00AM
Date
Start
End
CH
VARIABLE
New Program
REPLAY
SKIP
PLAY
1/1
B
X
1.3/0.8
STOP
PAUSE
DVD
• If there are 6 or more programs, use
[SKIP j / i] to change pages.
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Use [K / L] to enter the date, then
press [B].
3
Timer Programming
TUE JAN/01 10:00AM
Date
Date
Start
Start
End
CH
End
JAN/02
CH
DTV125- 1
- - : - -
REC To
HDD
- - : - -
Mode
SP
SP
2 : 00
1/1
JAN/01
Daily
When pressing [L] at
the current date, the
date will change as
follows.
Note
MON-SAT
MON-FRI
SAT
• If you have not set the clock yet:
“Manual Clock Setting” menu will appear instead of
the timer programming list at step 1. Continue with
the step 4 in “Manual Clock Setting” on page 32
before setting a timer programming.
e.g.) January 1st
FRI
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
SUN
• You cannot make a program whose recording time
exceeds 12 hours.
JAN/31
Instructions continue on the next page.
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Use [K / L / { / B] or [the Number
Use [K / L] to select a recording
buttons] to enter the start and end
mode.
Start
Date
JAN/02
CH
End
1 : 00AM
Mode
SP
4
5
time, then press [B].
7
12 : 00AM
REC To
HDD
Date
JAN/02
CH
Start
12 : 00AM
REC To
HDD
End
- - : - -
Mode
SP
DTV125- 1
SP
1 : 00
DTV125- 1
1/1
SP
2 : 00
1/1
Refer to “Recording Mode” on page 44.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
• You cannot make a program whose recording
time exceeds 12 hours.
Date
JAN/02
CH
Start
12 : 00AM
REC To
HDD
End
1 : 00AM
Mode
SP
Use [K / L] to select analog (“- - -”) /
digital (“DTV”) mode or external
DTV125- 1
input (L1 / L2), then press [B].
SP
1 : 00
Date
JAN/02
CH
Start
12 : 00AM
REC To
HDD
End
1 : 00AM
Mode
SP
Auto recording mode select (DVD only)...
L1
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
SP
1 : 00
1/1
automatically to complete recording the program.
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] to select the channel number to
Date
JAN/02
CH
Start
12 : 00AM
REC To
DVD
End
1 : 00AM
Mode
record.
DTV125- 1
Auto
Auto
1 : 00
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 51
for more details.
• “Auto” is only available for one program in the timer
program list.
e.g.) analog mode
Alternate recording (DVD only)...
Date
JAN/02
CH
Start
12 : 00AM
REC To
HDD
End
1 : 00AM
Mode
SP
If there is no recordable disc in the unit, if the disc does not
have enough space to complete the recording, or if the
material is “copy-once” program and prohibited to be
recorded on a DVD in the unit, the unit will detect it and
automatically record to the HDD even when DVD is
selected as the recording media. If the available space on
the HDD is less than that of DVD, the unit will not
perform the alternate recording. This feature is available
only for timer recording. Not available for one-touch
timer recording.
10
SP
1 : 00
1/1
e.g.) digital mode
Date
JAN/02
CH
Start
End
1 : 00AM
Mode
SP
12 : 00AM
REC To
HDD
DTV125- 1
SP
1 : 00
1/1
Press [ENTER] when all items are
entered.
Use [K / L] to select the recording
media (“HDD” or “DVD”), then press
[B].
Your program setting will be stored.
8
• To set another program, repeat steps 2 to 8.
• To exit, press [TIMER PROG.] or [SETUP].
6
e.g.) recording to HDD
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 51.
Date
JAN/02
CH
Start
12 : 00AM
REC To
HDD
End
1 : 00AM
Mode
SP
DTV125- 1
SP
1 : 00
1/1
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
How to select a channel number for the timer recording
Analog TV
For channel number 2-6, press [B] or [ – ] to decide the channels. For other channels (7-69), the
channel will be decided as soon as you enter the channel number.
Analog CATV
Digital TV
For channel number 1-12, press [B] or [ – ] to decide the channels. For other channels (13-125),
the channel will be decided as soon as you enter the channel number.
For major channel number 1-9, press [B] or [ – ] to decide the major channels. For other major
channels (10-99), the major channel will be decided as soon as you enter the major channel number.
Digital CATV
minor channels
For major channel number 1-13, press [B] or [ – ] to decide the major channels. For other major
channels (14-135), the major channel will be decided as soon as you enter the major channel number.
For channel number 1-9, press [B] or [ – ] to decide the channels. For other channels (10-99), the
channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”: [0]+[5]
• For selecting the channels with [K / L], you need to press [B] or [ – ] to decide the channel number.
• For selecting the minor channels with [K / L], please make sure the minor channel you are selecting is existing.
[K / L] does not skip the non-existed minor channels.
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
1) Press [POWER].
Timer Programming
2) Press [TIMER PROG.].
TUE JAN/01 10:00AM
Date
Start
End
CH
3) Check the information on the list you want to edit.
E40 JAN/02 12:00AM 1:00AM DTV 125- 1
New Program
Timer Programming
JAN/ 2/08 12:00 AM 125-01 SP
SP (1:00)
TUE JAN/01 10:00AM
Date
Start
End CH
1/1
JAN/02 12:00AM 1:00AM DTV 125- 1
New Program
Each error number means:
E1-22 Recording error other than below
E37-39
1/1
E25-26 Copy prohibited program
4-A) To delete the timer program:
E30
E40
Disc full
1 Use [K / L] to select the program you want to
delete, then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
Some portion has not been recorded because of
program overlapping. Recording did not start at the
start time.
E41
E47
E49
Power failed
3 Use [K / L] to select “Yes”, then press [ENTER].
Already 600 titles recorded on the HDD
4-B) To correct the timer program:
There was no disc space on the HDD at the starting
time for the HDD timer recording.
1 Use [K / L] to select the program you want to
correct, then press [ENTER].
2 Use [K / L] to select “Program Change”, then
press [ENTER].
E50
HDD recording is canceled due to the insufficiency of
the disc space on the HDD.
• E23-24, E27-29, E31-36, E42-46 and E48 are not
displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
3 Correct the timer program by using
[K / L / { / B], then press [ENTER].
5) Press [TIMER PROG.] to exit.
To stop the timer recording in progress
Press [C STOP] on the front panel of the unit or press
and hold [STOP C] on the remote control for 2
seconds.
Note
• Press [TIMER PROG.] to check the timer recording in
progress.
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING
Hints for Timer Recording
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• When recording to a DVD, if a disc is not inserted, the
unit will perform the alternate recording to the HDD
(refer to page 50).
• You cannot change the audio language for the timer
recording of digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours
cannot be made.
• It is prohibited to turn off the unit from 4 minutes before
the programmed starting time.
• When a timer recording is completed, the unit will ask
you whether to turn off the unit if there is no timer
recording which starts within 5 minutes, except under
conditions listed below.
• It is prohibited to change channel from 15 seconds
before the programmed starting time.
• [REC/OTR] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes
before the starting time during regular or one-touch
timer recording, the recording in progress will be
stopped.
• Playback of DVD/CD is prohibited from 2 minutes before
the programmed starting time when the recording
media is DVD. If it comes to 2 minutes before the
programmed starting time during DVD/CD playback, the
playback will be stopped.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned off automatically if you select
“Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted and be cleared for redoing.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
you press [ENTER] at step 8 on page 50.
The Priority of Overlapped Settings
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
When the starting time is the same:
A program set previously (PROG. A) has priority.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
Note for DVD recording
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
program will be displayed with errors number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
PROG. A
PROG. B
The first 2 minutes (at the longest) will be cut off.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Connection to an External Device
Connect the external device properly to the unit by using input jacks either L2 and L3 (Front) or L1 (Rear).
When connecting an external device of monaural output to this unit, use AUDIO L jack of L1 (Rear) or L2 (Front).
Use S-video or the RCA audio/video cables for this connection.
When connecting a DVC (digital video camcorder), use DV-IN jack of L3 (Front).
or
VIDEO
OUT
AUDIO OUT
S-VIDEO
OUT
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
DV-OUT
R
L
L
R
external device
(camcorder, VCR etc.)
S-video
cable
RCA
RCA
DV cable
(4-pin)
RCA
RCA
or
S-video
cable
video
cable
audio
cable
video
cable
audio
cable
or
VIDEO EO
IN
UT
Y
P
B/CB
L
L
S-VIDEO
VIDEO
AUDIO
DV-IN
R
R
P
R/CR
IN
OUT
or
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO AUDIO OUT
S-VIDEO
(
)
L1
L2
to L2 & L3 IN
L3
L1
to L1 IN
VIDEO VIDEO
IN OUT
Y
IN
L
L
OUT
R
R
IN
OUT
COAXIAL
DV-IN
AUDIO IN
(L1)
ANTENNA
S-VIDEO AUDIO OUT
S-VIDEO
front of this unit
rear of this unit
Use [K / L] to select “Select Video”,
Supplied cables used in this connection are as follows:
then press [ENTER].
• RCA audio cable (L/R) x 1
• RCA video cable x 1
4
5
Please purchase the rest of the necessary cables at your
local store.
Use [K / L] to select desired external
input position, then press [ENTER].
CLEAR
General Setting
SETUP
AUDIO REPEAT
HDMI
Playback
Display
Video
Progressive
TV Aspect
Recording
Clock
Channel
HDMI
leo
Select Video
MENU/LIST
TOP MENU
L1 (Rear)
L2 (Front)
Reset All
ENTER
DISPLAY
SKIP
RETURN
SKIP
Use [K / L] to select the input jack
VARIABLE
type to connect, then press [ENTER].
If you want to use VIDEO IN jack, select “Video
In”.
If you want to use S-VIDEO IN jack, select
“S-Video In”.
REPLAY
SKIP
6
7
Press [SETUP].
General Setting
Playback
Display
Video
Progressive
TV Aspect
1
2
3
Recording
Clock
Channel
HDMI
L2 (Front)
Video In
Use [K / L] to select “General
Setting”, then press [ENTER].
S-Video In
Reset All
Use [K / L] to select “Video”, then
press [ENTER].
Press [SETUP] to exit.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
Turn on the TV and press
[POWER], and be sure to select the
input of the TV to which the unit is
connected.
If you are recording to the HDD,
press [HDD], then proceed to step 4.
If you are recording to a disc, press
[DVD].
Before recording from an external device, refer to the
instructions for the connection on page 53.
1
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
Press [OPEN/CLOSE A] to open the
disc tray. Place the disc to record on
properly.
PQRS
WXYZ
CLEAR
2
3
SETUP
AUDIO REPEAT
HDMI
Press [OPEN/CLOSE A] to close the
disc tray.
MENU/LIST
TOP MENU
It takes awhile to load
the disc.
ENTER
DISPLAY
SKIP
RETURN
SKIP
Select the input of the unit to which
the external device is connected. (L1,
L2 or L3)
• To use the input jacks on the rear of this unit;
Select “L1” by using [INPUT SELECT] or
VARIABLE
REPLAY
SKIP
4
PLAY
[CH
/
].
B
X
1.3/0.8
STOP
PAUSE
DVD
• To use the input jacks on the front of this unit;
Select “L2” or “DV“ by using
DUBBING
HDD
[INPUT SELECT] or [CH
• You can also select “L1” or “L2” by using
[the Number buttons].
- For L1, press [0], [0], [1].
- For L2, press [0], [0], [2].
/
].
TIMER PROG.
REC MODE REC/OTR
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 44.
5
6
7
8
2 3
Press [I REC/OTR] on the front panel
to start recording.
Start playback on the external device
to record from.
8 6 1
Press [C STOP] on the front panel to
stop recording.
This operation may take
awhile to be completed.
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
Guide to DV and On-Screen Display
This function helps you to easily dub the contents of the DVC (digital video camcorder) to HDD or DVD.
You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or
reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is
compliance with the IEEE1394 standards. When you connect to DV-IN jack on the front of this unit, select “DV” position
by using [INPUT SELECT] or [CH
/
] on the remote control and press [DISPLAY] to show the DV dubbing
information for the operation of your DVC.
When the DVC is
in video mode...
When the DVC is not
in camera mode...
1
1/
1
1/
1
1/
1
1/
1
-
RW VR ORG
-RW VR ORG
The menu changes according to
what mode of DVC.
Switch the mode on the DVC to
playback mode for the dubbing
information.
Control
DV Audio
Start Rec
DVD
Stereo1
DV
DV
5
2
AB-1234
0:12:34
AB-1234
0:12:34
DVD SP
1:00
DVD SP
1:00
3
4
7
6
The following instructions are described with the operations using the remote control of this unit.
1. DV icon
6. Product name of your DVC
2. Indicator of active device
• When the “Control” is
• If the unit cannot recognize the
input signal from the DVC or the
unknown product, “No Device” or
“****” will appear instead.
7. Status of the current operation
and the time counter
highlighted, press [ENTER] to
display the item selection. Use
[K / L] to select the device you
wish to operate, then press
[ENTER] to activate.
• Select “HDD” / “DVD” to control
this unit.
Each icon means (Available icons
may vary depending on the DVC):
DVC is in stop mode.
DVC is in playback mode.
DVC is in pause mode.
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
• Select “DVC” to control your DVC.
3. Recording audio mode
• Other than the DVC is in stop
mode, the “DV Audio” can be
selected. Press [ENTER] to display
the item selection and then use
[K / L] to select the audio you
wish to output. Press [ENTER]
again to activate.
• Select “Stereo1” to dub the stereo
sound.
• Select “Stereo2” to dub the sound
with after recording sound.
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is in recording.
• Select “Mix” to dub the stereo1
and stereo2.
4. Indicator of dubbing function
DVC is in recording pause
mode.
DVC is slow forwarding.
(faster than above)
DVC is slow forwarding.
(faster than above)
• When the unit is ready for
dubbing, “Start Rec” will appear.
• When the unit is in dubbing,
“Pause Rec” will appear.
5. Channel position
• When you select “DV” by using
[INPUT SELECT] or
[CH
/
], “DV” will appear.
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
DVC to HDD/DVD Dubbing
Preparing for DV dubbing (DVC to HDD):
• Make sure your DVC is in video mode.
Preparing for DV dubbing (DVC to DVD):
• Insert a recordable DVD.
Before recording from DVC, see page 53 for connection
instructions.
• Make sure your DVC is in video mode.
INPUT
OPEN/
Use [INPUT SELECT] or [CH
/
] to
POWER DTV/TV SELECT CLOSE
select “DV”.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
1
CH
DV
AB-1234
0:00:00
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
Press [REC MODE] to select a
recording mode.
(Refer to page 44.)
2
ENTER
DISPLAY
SKIP
RETURN
SKIP
Press [DISPLAY].
VARIABLE
REPLAY
SKIP
3
PLAY
Press [ENTER] to display the item
selection. Use [K / L] to select “DVC”,
then press [ENTER].
BX1.3/0.8
STOP
PAUSE
DVD
4
DUBBING
HDD
1/
1
1/
1
-RW VR ORG
TIMER PROG.
REC MODE REC/OTR
Control
DVD
DV
DV Audio
Start Rec
Stereo1
AB-1234
0:12:34
DVD XP
1:00
Press [PLAY B] to find where you
wish to start dubbing. Then, press
[STOP C] where you wish to start
dubbing.
5
6
7
Use [K / L] to select “Start Rec”, then
press [ENTER].
The dubbing will start.
To stop dubbing;
Use [K / L] to select “Control”, then
press [ENTER].
Use [K / L] to select “HDD” / “DVD”,
then press [ENTER].
Then press [STOP C].
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DV DUBBING
Note for DV dubbing
• If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point.
When you press [ENTER] at step 6, then, it will start dubbing when it comes to the paused point.
• The unit does not send out the output signal to DVC.
• For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit.
• Do not connect more than 1 DVC.
• The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
• If no video signal is detected from the DVC during DVC to HDD or DVD dubbing, the recording will be paused and
“I” will flash on the TV screen. The recording will resume when the unit detects the video signal again.
• When the DVC is in camera mode, refer to “Guide to DV and On-Screen Display” on page 55.
• Date / time and cassette memory data will not be recorded.
• Pictures with a copy-guard signal cannot be recorded.
• A DV terminal is a terminal that can use the transmission mode conforming to the IEEE 1394 standards called “Fire
Wire”. It serves as the interface that connects the PC and peripheral device such as “i.Link” (registered trademark of
SONY). It enables digital dubbing between DV devices with little degradation.
• You cannot dub from DVC to both HDD and DVD at the same time.
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
Information on Dubbing
Note on dubbing
• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
be changed). During high speed dubbing, the
playback picture will not appear.
You can dub the contents of the HDD to DVD or vice
verse. Before you start dubbing, refer to pages 10-11 to
see the recording compatibility.
• Dubbing of a copy-once programs are only available
when you dub HDD to DVD-RW disc with Content
Protection for Recordable Media (CPRM) formatted in
VR mode, and in this case, the programs does not
remain on the HDD.
• If you stop the dubbing halfway, the contents will be
dubbed up to the point where you stop the dubbing
(except for the high speed dubbing). With high
speed dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [C STOP] on
the front panel or press [STOP C] for 2 seconds on
the remote control. If you stop the high speed
dubbing or stop the dubbing a copy-once programs,
confirmation message appears. Select “Yes” using
[K / L], then press [ENTER] to proceed.
Guide to Dubbing Menu Display
HDD
DVD
1
3000 MB
3
4
5
Dubbing List
Add
Delete All
Dubbing Start
2
1/1
1 Dubbing direction
2 Dubbing menu
3 Remaining recordable space
4 Dubbing list
5 Current page number / total number of pages
Other recording modes
Recording Mode for Dubbing
“High”
Refer to page 44 for the information on other recording
modes.
This unit is compatible with the high speed dubbing from
HDD to DVD or from VR mode DVD-RW to HDD.
Before Starting Dubbing
With the high speed dubbing you can dub a title much
faster than the normal speed dubbing without changing
the quality of the picture and sound. (e.g. If you dub a
title recorded in SLP mode to DVD-R, dubbing speed will
be 32 times faster than the normal dubbing.) To perform
the high speed dubbing, set the recording mode to
“High”.
• Duration of high speed dubbing will vary depending on
the recording mode or the title amount.
• High speed dubbing is not available when;
- recording mode is set to other than “High”.
- dubbing from a video mode DVD-RW/-R to the HDD.
- there is not enough space in the disc or HDD.
HDD to DVD / DVD to HDD
You can copy the contents between HDD and DVD.
Limitation (DVD to HDD):
• If a copy control signal is detected during dubbing,
the dubbing will be stopped.
Preparing for dubbing (HDD to DVD):
• Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
• Discs dubbed with other devices may not be dubbed.
• High speed dubbing of an HDD title which has bilingual
audio is only available to VR mode DVD-RW disc.
“Auto”
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available automatically.
• The recording may be cut short when the available
recording space of the disc is too limited.
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
Selected Title Dubbing
Press [SETUP] in stop mode.
1
2
Use [K / L] to select “Dubbing”, then
press [ENTER].
Setup
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
General Setting
Timer Programming
Title List
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
DVD Menu
HDD Menu
CH
Dubbing
PQRS
WXYZ
CLEAR
HDD to DVD
SETUP
AUDIO REPEAT
HDMI
Use [K / L] to select “HDD DVD”,
then press [ENTER].
DVD to HDD
3
4
MENU/LIST
TOP MENU
ENTER
Use [K / L] to select “DVD HDD”,
then press [ENTER].
e.g.) HDD ➔ DVD
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
Dubbing
HDD
DVD
DVD
HDD
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Use [K / L] to select “Add”, then
press [ENTER].
HDD
DVD
3000 MB
Dubbing List
Add
Delete All
Dubbing Start
1/1
• If you have registered any dubbing before,
they will be listed in the dubbing title list.
Note
• Dubbing will be cancelled 2 minutes before starting
timer recording.
Instructions continue on the next page.
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
DUBBING
Use [K / L / s / B] to select a desired
Use [s / B] to select a desired
title, then press [ENTER].
e.g.) HDD Original
recording mode, then press [ENTER].
e.g.) HDD ➔ DVD
5
6
8
HDD
DVD
Title List
ORG
ABCDE
12:00AM (10:00:00) JAN/ 1/08
CH10 SP
1
2
3
6
Please select REC MODE.
SP LP EP
High
XP
SLP
Auto
Dubbing Titles
500 MB
4
5
3000 MB
1 / 6
Confirmation message will appear.
The title is now registered in the dubbing list.
• When dubbing from HDD to DVD or from VR
mode DVD-RW to HDD, you can select “High”
to perform the high speed dubbing (refer to
“Recording Mode for Dubbing” on page 58 for
more details).
Repeat steps 4 to 5 until you register
all the titles to be dubbed.
To delete a title:
1 Go to the dubbing list, then use [K / L] to
select a title. Then press [ENTER].
2 Use [K / L] to select “Delete”, then press
[ENTER].
3 Use [K / L] to select “Yes”, then press
[ENTER].
Use [K / L] to select “Yes”, then press
[ENTER].
9
Start Dubbing?
Yes
No
To move a title:
If dubbing continues when timer recording
starts, the next display will appear.
1 Go to the dubbing list, then use [K / L] to
select a title. Then press [ENTER].
2 Use [K / L] to select “Move”, then press
[ENTER].
3 Use [K / L] to select a desired insert point,
then press [ENTER].
There areTimer Programming
Start Dubbing?
Yes
No
Dubbing will start.
• It may take awhile to prepare for the dubbing.
To stop the dubbing in progress:
To erase all the titles in the dubbing title list:
1 Use [K / L] to select “Delete All” in the
dubbing menu, then press [ENTER].
2 Use [K / L] to select “Yes”, then press
[ENTER].
Final confirmation message will appear.
3 Use [K / L] to select “Yes”, then press
[ENTER].
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
One-touch Dubbing...
With one-touch dubbing, you can start dubbing right
away with just one touch.
To dub the contents in a DVD which is finalized on
other unit, use this function.
• To go back and forth between dubbing menu
and dubbing list, use [s / B].
During playback of the title you want to dub, press
[DUBBING].
If you are playing back a DVD, DVD to HDD dubbing
will start right away.
If you are playing back HDD, HDD to DVD dubbing will
start right away.
After adding all the titles you want,
use [K / L] to select “Dubbing Start”
in the dubbing menu, then press
[ENTER].
7
• The dubbing will start from the beginning of the title
being played back.
• The unit will dub only the title being played back.
• When dubbing from HDD to DVD or VR mode DVD-RW
to HDD, recording mode will automatically be set to
“High” whenever the conditions are met. (See page 58.)
• If the high speed dubbing is not available, the title
will be dubbed in normal speed with the recording
mode of the title.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
60 EN
DUBBING
One-Title Dubbing between HDD and DVD
If you are dubbing a title in the HDD, press [HDD] first.
If you are dubbing a title in a disc, press [DVD] first.
This function lets you select one specific title from the
title list for dubbing.
Press [TOP MENU].
1
Use [K / L / s / B] to select a desired
title to dub, then press [ENTER].
2
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Dubbing”, then
press [ENTER].
e.g.) HDD Playlist
CH
3
Resume Playback
Play From Start
Edit
Title Delete
Delete Plural Titles
Dubbing
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
Use [K / L] to select “Yes”, then press
[ENTER].
ENTER
Start Dubbing?
4
DISPLAY
SKIP
RETURN
SKIP
Yes
No
VARIABLE
REPLAY
SKIP
Dubbing of the selected title will start.
To stop the dubbing in progress:
Press [C STOP] on the front panel.
Press [STOP C] for 2 seconds on the remote
control.
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON PLAYBACK
Structure of Disc Contents
The contents of HDD/DVD are generally divided into titles, and the titles are subdivided into chapters.
Audio CDs are divided into tracks.
Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files.
Title:
Divided contents of a DVD-video. Roughly
corresponds to a story title in short stories.
HDD/DVD-video
Title 2
Title 1
Chapter: Divided contents of a title. This corresponds to
a chapter in a story.
Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3
Track:
Divided contents of an audio CD.
Folder:
Divided contents of a MP3/JPEG data disc.
Consists of the number of files.
Audio CD
Each title, chapter, or track, folder or file is assigned a
number, which is called “title number”, “chapter number”,
“track number”, “folder number” or “file number”
respectively.
Track 1 Track 2 Track 3 Track 4 Track 5
Some discs may not have these numbers.
MP3/JPEG
folder 1
file 1 file 2
folder 2
file 2
file 1
file 3
62 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Direct Playback
If you are playing back the titles in HDD, press [HDD]
first, then proceed to step 3.
If you are playing back the titles in DVD, press [DVD] first.
Press [OPEN/CLOSE A] to open the
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
disc tray and insert your disc with its
1
2
label facing up.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
PQRS
WXYZ
CLEAR
Align the disc to
the disc tray guide.
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
Press [PLAY B] to start playback.
If you are playing back a DVD-video, a menu
may appear.
PLAY
3
4
Refer to “Using the Title/Disc Menu” on page 66.
B
X1.3/0.8
STOP
PAUSE
DVD
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 67.
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Note
• Some discs may start playback automatically.
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playback from the Title List
If you are playing back the titles in HDD, press [HDD]
first, then proceed to step 2.
If you are playing back the titles in DVD, press [DVD] first.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Follow steps 1 to 2 in “Direct
Playback” on page 63.
1
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
For HDD, press [TOP MENU] to call up
the title list. For DVD, the title list will
automatically appear when you
insert a disc. Otherwise, press
PQRS
WXYZ
CLEAR
2
SETUP
AUDIO REPEAT
HDMI
[TOP MENU] or [MENU/LIST].
• To exit the title list, press [STOP C].
• To resume the title list, press [TOP MENU].
MENU/LIST
TOP MENU
Use [K / L / { / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
ENTER
DISPLAY
SKIP
RETURN
SKIP
3
Title List
ORG
VARIABLE
REPLAY
SKIP
JAN/ 1/08 12:00AM CH10 SP
12:00AM (0:12:00) JAN/ 1/08
CH10 SP
1
2
3
6
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
4
5
DUBBING
HDD
1 / 6
TIMER PROG.
REC MODE REC/OTR
Use [K / L] to select “Play From
Start”, then press [ENTER].
4
5
Title List
ORG
JAN/ 1/08 12:00AM CH10 SP
12:00AM (0:12:00) JAN/ 1/08
CH10 SP
1
4
2
3
6
Play From Start
Edit
Title Delete
Add To Playlist
Dubbing
1 / 6
Playback will start.
• For title in the HDD, you can also select
“Resume Playback” to play from the resume
points.
Press [STOP C] once to stop playback
temporarily.
• Refer to “Resume Playback” on page 67.
To eject the disc, press [OPEN/CLOSE A] to
open the disc tray, then remove the disc before
turning off the unit.
Note
• Some discs may start playback automatically.
• You can also start playback by pressing [PLAY B]
instead of [ENTER] at step 4.
• At step 3, you can press [SKIP G], or press [B]
when the title on the lower right of the title list is
highlighted to display the next page, and press
[SKIP H], or press [{] when the title on the upper
left of the title list is highlighted to display the
previous page.
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG Files
Press [DVD] first.
Follow the step 1 in “Direct Playback”
1
2
on page 63.
INPUT
OPEN/
Press [OPEN/CLOSE A] to close the
disc tray.
It may take awhile to load
the disc completely.
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
File list will appear automatically.
• To exit the file list, press [STOP C].
• To resume the file list, press [TOP MENU].
PQRS
WXYZ
CLEAR
Use [K / L] to select a desired folder
SETUP
AUDIO REPEAT
HDMI
or track/file, then press [ENTER].
3
File List
MENU/LIST
TOP MENU
DISC NAME
A
B
1
2
3
4
5
6
JPEG file1
JPEG file2
MP3 file1
MP3 file2
MP3 file3
MP3 file4
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
1/ 2
PLAY
When selecting track/file:
Playback will start.
B
X
1.3/0.8
STOP
PAUSE
DVD
When selecting folder:
The files in the folder will appear.
DUBBING
HDD
Use [K / L] to select the file or folder you want to play
back, then press [ENTER].
TIMER PROG.
REC MODE REC/OTR
• Press [PLAY B], [ENTER] or [B] to move to any lower
hierarchies.
• Press [s] or [RETURN
hierarchy.
] to move back to the previous
Hints for audio CD tracks and MP3/JPEG files:
• Folders are shown by
• Audio CD tracks are shown by
.
.
3
• MP3 files are shown by
• JPEG files are shown by
.
.
• The system can recognize up to 255 folders and, up to
99 tracks/999 files.
• Letters of a file/folder name overflowing the given space
will be displayed as “…”.
•
If there are no files in the folder, “No Files” will be displayed.
Note
It is recommended that files to be played back in this
unit are recorded under the following specifications:
• The audio source of MP3 files cannot be recorded as
digital sound by an MD or DAT deck.
<MP3>
• Files whose extension is other than “.mp3(MP3)” or
“.jpg / .jpeg(JPEG)” will not be listed.
• Sampling frequency
• Constant bit rate
: 44.1 kHz or 48 kHz.
: 112 kbps - 320 kbps
• Some unplayable folders or files may be listed due to
the recording status.
• High-resolution JPEG files take longer to be displayed.
• Progressive JPEG files (JPEG files saved in progressive
format) cannot be played back on this unit.
<JPEG>
• Upper limit
• Lower limit
: 6,300 x 5,100 dots.
: 32 x 32 dots.
• File size of image maximum : 12 MB.
• The JPEG pictures can also rotate by using [s / B].
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC PLAYBACK
Playing Back an Audio CD and a
CD-RW/-R with MP3/JPEG Files (cont’d)
Using the Title/Disc Menu
Kodak Picture CD
DVD may contain a title list, which describes the contents
of the disc, or a disc menu, which guides you through the
available functions in the disc.
The Picture CD is a service to convert photographs taken
by a conventional film camera into digital data and write
the data on a CD. You can enjoy picture images on the TV
set by playing back the Picture CDs.
For details of Kodak Picture CD, contact a shop that
provides developing service of Kodak Inc.
1)Press [TOP MENU] or [MENU/LIST] to call up the title
list or disc menu.
2)Use [K / L / { / B] to make a selection, and then
press [ENTER] to enable your selection.
1)Press [TOP MENU].
Picture CD
Image 1
3)Press [STOP C] to exit the disc menu.
1
4
2
5
3
6
Note
• You can select a numbered menu with [the Number
buttons] also.
• Menus vary among discs. Refer to the information
accompanying the disc for details.
1 / 2
• [MENU/LIST] or [TOP MENU] will not always be
effective for all DVDs.
• To exit the Picture CD thumbnail List, press [TOP
MENU] again or press [STOP C].
Arrow icons mean the title list includes a next or
previous page. Use [{ / B] in the direction of the
icon you wish to follow. You can also quick review the
six thumbnails at once between the first and last
pages by pressing [SKIP H / G].
Pause
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Use [K / L / { / B] to select a desired track to be
played back, then press [PLAY B] or [ENTER].
An image will be played back from the selected track
and go to the next one in turn.
3)Press [STOP C] to stop playback.
Notes on JPEG and Kodak Picture CD:
• After track is displayed for 5 seconds or 10 seconds
(set in the “Slide Show” on page 73) the display
moves to the next track.
F
During JPEG or Kodak Picture CD playback, press [B]
or [{] to rotate a picture 90 degrees clockwise or
counterclockwise respectively.
2)Press [PLAY B] to return to normal playback.
Note
(Not available when the display menu appears.)
• For DVD, set “Still Mode” to “Field” in “Playback”
menu if pictures in the pause mode are blurred.
(Refer to page 98.)
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Resume Playback
Variable Skip / Variable Replay
You can play back from where you stopped playing back
the disc last.
During playback, you can skip forward or backward by
the amount of time you set in “Playback” menu. To set
1)During playback, press [STOP C].
The resume message will appear.
the time amount, refer to “
page 98.
Variable Skip / Replay” on
8
Resume ON
During playback, press [VARIABLE SKIP ] if you
want to skip forward. Press [VARIABLE REPLAY ] if
you want to skip backward.
2)Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn off the unit.
Rapid Playback
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP C] again
while the playback is stopped.
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
Note
• For MP3/JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
• For HDD, you can set a resume point per every title.
• For title in the HDD, you can also play from the
resume point by selecting “Resume Playback” at step
4 of “Playback from the Title List” on page 64.
1)During playback, press [Bx1.3/0.8].
Press [Bx1.3/0.8] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B
:
Fast Forward / Fast Reverse Playback
Press [Bx1.3/0.8] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B
:
B :
Press [Bx1.3/0.8] thrice to play back in
normal speed.
No effects.
1)During playback, press [FWD D] or [REV E].
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows.
2)Press [PLAY B] to return to normal playback.
Fast forward or fast reverse playback across titles (for
DVD), or files (for MP3 files) is not possible.
Note
• Audio (language) setting cannot be changed while
using this mode.
FWD
FWD
FWD
FWD
FWD
FWD
normal
speed
REV
REV
REV
REV
REV
REV
40x
20x
5x
2x
20x
40x
• This feature may not work at some point in a disc.
• Audio is LPCM (2 channel) during rapid playback.
playback
For audio CD, MP3 files, approximate speed is fixed at
8x with sound.
2)Press [PLAY B] to return to normal playback.
Step by Step Playback
Note
• Forward/reverse speed will be indicated with icons
as follows.
1)During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2)Press [SKIP i ] repeatedly.
Playback will advance one frame at a time when you
press [SKIP i ] with the sound muted.
To play back step by step backward:
Press [SKIP j ] repeatedly.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [SKIP j ] / [SKIP i ] to reverse/
advance continuously.
3)Press [PLAY B] to return to normal playback.
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Slow Forward / Slow Reverse Playback
Zoom
1)During playback, press [DISPLAY].
1)During playback, press [PAUSE F]. Then press
[FWD D] or [REV E].
2)Use [{ / B] to select
, then press [ENTER] within
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows. (The
sound will remain muted.)
1 second, or wait for 1 second to display the
selection menu.
e.g.) DVD-video
FWD
FWD
FWD
FWD
FWD
FWD
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
REV
REV
REV
REV
REV
REV
pause
1/4x
1/8x
1/16x
1/16x
1/8x
1/3x
2)Press [PLAY B] to return to normal playback.
Note
3)Use [K / L] to select a desired zoom factor to zoom,
then press [ENTER].
• Forward/reverse speed will be indicated with icons
as follows.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
forward (approx. speed)
1/16x:
1/8x:
× 1.2
× 1.5
× 2.0
1/3x:
reverse (approx. speed)
Zoom menu will appear.
There are four options
(x1.0, x1.2, x1.5 and x2.0), these are displayed
excluding the current zoom rate.
1/16x:
1/8x:
1/4x:
Zoom area will be displayed.
4)Use [K / L / { / B] to select a desired zoom
position, then press [ENTER].
Zoom playback will start.
Note
• When selecting a smaller factor than the current one,
the zoom area will not be displayed.
• To exit the zoom menu, press [DISPLAY] repeatedly.
• To cancel the zoom function, select “x1.0” using
[K / L], then press [ENTER] at step 3.
• You cannot slide the zoomed picture on some JPEG
files.
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Marker Setting
Chasing Playback during Recording
This feature allows you to assign a specific point on a disc
to be called back later.
You can play back a title being recorded from the
beginning while recording continues.
1)During playback, press [DISPLAY].
1)During recording, press [PLAY B].
Playback of the title you are recording will start from
the beginning.
2)Use [{ / B] to select
, then press [ENTER] within
1 second, or wait for 1 second to display the marker
list.
e.g.) DVD-video
• Elapsed playback time will be displayed in the front
panel display.
2)Press [STOP C] once to stop playback.
The front panel display will switch back to show the
elapsed recording time.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
If you press [STOP C] twice, it will stop the recording.
3)Use [K / L] to select a desired marker number.
When it reaches the desired point, press [ENTER].
Note
• You can also use the special playback functions such
as [REV E], [FWD D] etc. during chasing playback
mode.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1
• [REC/OTR] is invalid during chasing playback.
2
3
4
5
6
• You can no longer fast forward the playback when it
comes to a few seconds before the current recording
point.
Simultaneous Playback and Recording
The title (track) number and the time will be displayed.
4)To return to the marker:
Use [K / L] to select the desired marker number,
then press [ENTER].
With regard to HDD, you can continue recording a
program while playing back another title in the same
component (HDD).
To do so, press [TOP MENU] during recording and select
a title you like to play back, and then press [PLAY B].
(You can also start the playback from the title list menu.)
Note
• To clear a marker, select the marker number to be
cleared, then press [CLEAR].
To playback a title being recorded while continuing
to record, refer to “Chasing Playback during
Recording” on this page (available only with HDD).
• All markers are erased when you perform the
following operations.
- Opening the disc tray (CD/DVD only)
- Turning off the power (CD/DVD only)
- Making additional recording on the disc (DVD only)
- Editing any title (DVD only)
- Dividing the title (HDD only)
- Combining the title (HDD only)
- Deleting a scene of the title (HDD only)
- Changing the mode between Original and Playlist.
(VR mode DVD-RW disc only)
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK
Playing Back the Autostart Recording
By playing back the autostart recording, you can pause
or go back the TV program you are currently watching.
For the autostart recording refer to “AUTOSTART
RECORDING” on page 48.
To pause and resume the TV program:
1)When watching TV program through this unit’s
tuner, press [PAUSE F].
TV program will be paused and sound will be muted.
2)Press [PLAY B] to resume the TV program you were
watching from where you have paused.
To go back the TV program:
When watching TV program through this unit’s
tuner, press [SKIP H], [REV E] or
[VARIABLE REPLAY ].
• While playing back the autostart recording, pressing
[SKIP H] or [SKIP G] skips playback point 5
minutes backward or forward.
To go back to the specific time:
1)When watching TV program through this unit’s
tuner, press [DISPLAY], then press [ENTER].
2)Use [K / L / { / B] or [the Number buttons] to
enter a desired time, then press [ENTER].
• While playing back the autostart recording, press
[STOP C] to cancel the playback.
• When watching TV program or while playing back the
autostart recording, press [DIPLAY] once to display
the autostart recording information. Refer to
“Autostart Recording Information” on page 23.
• Noise reduction, zoom and virtual surround functions
are available while playing back the autostart
recording.
Note
• While playing back the autostart recording, you
cannot change the channels.
• While playing back the autostart recording, you
cannot change the DTV audio language.
• If you change to DVD mode or if the timer recording
starts while playing back the autostart recording, the
playback will be stopped.
• When this unit turns on for the timer recordings, the
autostart recording will not be performed.
• For the contents of the autostart recording, you
cannot change the TV audio.
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH
Title/Chapter Search
Track Search
Using [SKIP j ] / [SKIP i ]
Using [SKIP j ] / [SKIP i ]
1)During playback, press [SKIP i] to skip the
current track/file and move to the next.
The track/file will move forward one at a time.
To go back to the beginning of the current track/file,
press [SKIP j ].
Press it twice in quick successions to go to the previous
track/file. The track/file will move backward one at a time.
1)During playback, press [SKIP i ] to skip the
current title or chapter and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title will
be skipped.
To go back to the beginning of the current title or
chapter, press [SKIP j ].
Using [DISPLAY]
Press it twice in quick successions to go to the previous
title or chapter. The title or chapter will move
backward one title at a time.
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [ENTER].
e.g.) audio CD
Note
• With regard to HDD, chapter search using
[SKIP j / i] is available only within the same
title.
1/
5
0:00:15 / 0:05:00
CD
e.g.) MP3 files
Using [DISPLAY]
1/
5
0:00:15
1)During playback, press [DISPLAY].
MP3
2)Use [{ / B] to select
e.g.) DVD-video
, then press [ENTER].
The number next to
will be highlighted.
3)Use [K / L] or [the Number buttons] to enter a desired
track/file number to search, then press [ENTER].
After the search, playback will start automatically.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Note
• During CD playback, you can enter a track number
directly using [the Number buttons] for track search
without displaying the menu.
The number next to
3)Title:
will be highlighted.
Use [K / L] or [the Number buttons] to enter a
desired title number to search, then press [ENTER].
Title search will start.
Time Search
Chapter:
Press [B] to move to the number next to
chapter.
for
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
e.g.) DVD-video
, then press [ENTER].
Use [K / L] or [the Number buttons] to enter a
desired chapter number to search, then press
[ENTER].
1/
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
After the search, playback will start automatically.
Note
e.g.) audio CD
• In search mode display, total numbers of each search
contents (title/chapter/time) are shown as a
denominator.
5
0:00:15 / 0:05:00
CD
The number next to
To move to the number next to
will be highlighted.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
, press [B].
When time search is not available,
counter are not displayed.
3)Use [K / L / { / B] or [the Number buttons] to
enter a desired time to search, then press [ENTER].
and time
total number
of titles
total time
of the title
total number
of chapters
After the search, playback will start automatically.
Note
• Time search is available only in the same track, file or title.
EN 71
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Note
Repeat Playback
• Point B for the repeat A-B playback should be set
within the same title or track of point A.
Available repeat function may vary depending the discs.
• To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be canceled when you
stop playback.
1)During playback, press [DISPLAY] or [REPEAT].
• If you press [REPEAT], skip to step3.
• You cannot select “Group” during the random
playback of MP3/JPEG files.
• Chapter/Track repeat will be canceled whenever a
Chapter/Track is skipped forward or backward.
• During the A-B repeat, if you reaches the point A
with any reverse playback, the reverse playback will
be canceled and the A-B repeat playback resumes
from point A.
2)Use [{ / B] to select
1 second, or wait for 1 second to display the
selection menu.
, then press [ENTER] within
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired option to repeat,
then press [ENTER].
e.g.) DVD-video
Random Playback
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Title
Chapter
A – B
You can play back a disc randomly instead of playing
back in the original order.
1)Press [SETUP] in stop mode.
e.g.) audio CD
2)Use [K / L] to select “CD Playback Mode”, then press
1/
5
0:00:15 / 0:05:00
[ENTER].
CD
“CD Playback Mode” menu will appear.
3)Use [K / L] to select “Random Play”, then press
[ENTER].
OFF
Track
All
A-B
Random playback will start.
e.g.) audio CD
e.g.) MP3/JPEG files
1/
5
0:00:15
MP3
1/
5
0:00:15 / 0:05:00
CD
OFF
Track
All
Random
Group
The selected repeat playback will start.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Note
Repeat
Title
• To cancel random playback, press [STOP C] twice
during random playback. “OFF” appears on the
display menu.
• During random playback, search function using
is not available.
Title:
The current title will be played back repeatedly.
Chapter:
The current chapter will be played back repeatedly.
All:
The current disc will be played back repeatedly.
A-B:
Desired section can be played back repeatedly.
1) Use [K / L] to select “A-B”, then press [ENTER].
2) Press [ENTER] at the desired starting point A.
3) Press [ENTER] at the desired ending point B.
Track:
The current track or file will be played back repeatedly.
Group:
The current folder will be played back repeatedly.
72 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
Program Playback
Slide Show
You can program the disc to play back in your desired
order.
You can select the display time between 5 seconds and
10 seconds.
1)Press [SETUP] in stop mode.
1)Follow steps 1 and 2 in “Program Playback” on the
left.
2)Use [K / L] to select “CD Playback Mode”, then press
[ENTER].
2)Use [K / L] to select “Slide Show”, then press
“CD Playback Mode” menu will appear.
[ENTER].
3)Use [K / L] to select “Program Play”, then press
[ENTER].
3)Use [K / L] to select the display time, then press
[ENTER].
4)Use [K / L] to select a desired track, then press
4)Press [SETUP] to exit.
[ENTER] or [B].
Note
CD Playback Mode
Program Play
• Large-size JPEG files take a few moments to be
displayed.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:00:00
Repeat this step until you program all the desired
tracks.
5)Press [PLAY B].
CD Playback Mode
Program Play
09 04 10 06 --
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Total 0:31:07
Program playback will start.
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using
[the Number buttons] at step 4.
• During program playback, search function using
is not available.
EN 73
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL SETTINGS
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.
Switching Subtitles
Switching Audio Soundtrack
DVD-video may have subtitles in one or more languages.
Available subtitle languages can be found on the disc
case. You can switch subtitle languages during playback.
When playing back a DVD-video recorded with 2 or more
soundtracks (these are often in different languages), you
can switch between them during playback.
When playing back the titles in HDD or VR mode DVD-RW
discs recorded with bilingual audio, you can switch “L/
R”(stereo), “L”(left) or “R”(right).
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
1 second, or wait for 1 second to display the
selection menu.
, then press [ENTER] within
1)During playback, press [DISPLAY] or [AUDIO].
If you press [AUDIO], skip to step 3.
e.g.) DVD-video
2)Use [{ / B] to select
1 second, or wait for 1 second to display the
selection menu.
, then press [ENTER] within
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired audio soundtrack or
audio channel, then press [ENTER].
For HDD, DVD-video, VR mode DVD-RW
• Audio soundtrack will switch.
e.g.) DVD-video
3)Use [K / L] to select a desired subtitle language,
then press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
1.English
1.Dolby Digital 2ch English
2.Dolby Digital 5.1ch English
Subtitle will be displayed in the selected language.
When “OFF” is selected, subtitle will disappear.
• If the title contains both main and sub audio, you can
further select “L“ (main), “R“ (sub), “L/R“ (mixed of
main and sub).
For audio CD
• Audio channel will switch.
e.g.) audio CD
Note
• Some discs will only allow you to change the subtitle
from the disc menu. Press [MENU/LIST] or [TOP
MENU] to display the disc menu.
• If a 4-digit language code appears in the subtitle
menu, refer to the “LANGUAGE CODE” on page 110.
1/
5
0:00:15 / 0:05:00
CD
1. L/R
2. L
3. R
Note
• Some discs will only allow you to change the
soundtrack from the disc menu. Press [MENU/LIST]
or [TOP MENU] to display the disc menu.
74 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL SETTINGS
Switching Virtual Surround System
Switching Camera Angles
Some DVD-video have scenes shot from two or more
angles. Angle information should be on the disc case if
the disc contains multi-angle scenes.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1)During playback, press [DISPLAY].
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
, then press [ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
2)Use [{ / B] to select
1 second, or wait for 1 second to display the
selection menu.
, then press [ENTER] within
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
Angle icon appears when a switching camera angle is available.
3)Use [K / L] to select “OFF”, “Type 1” or “Type 2”,
then press [ENTER].
Angle will switch each time you press [ENTER].
Note
e.g.) DVD-video
• Angle icon does not appear on the TV screen if you
set “Angle Icon” to “OFF” in “Playback” menu.
Refer to page 98.
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Reducing Block Noise
OFF
: no effect
Type 1 : natural effect
Type 2 : emphasized effect
1)During playback, press [DISPLAY].
2)Use [{ / B] to select
1 second, or wait for 1 second to display the
selection menu.
, then press [ENTER] within
Note
• Select “OFF” if sound is distorted.
• The setting will be kept when the unit is turned off.
e.g.) DVD-video
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
3)Use [K / L] to select a desired option, then press
[ENTER].
1/
5
1/
5
0:01:00 / 1:23:45
DVD Video
OFF
Type 1
Type 2
Your setting will be activated.
This function reduces noise in the playback picture. If
noises appear on the TV screen during playing back
discs recorded in long time recording mode such as EP
or SLP, select “Type 1” or “Type 2”.
(“Type 2” is more effective.)
When playing back discs with a few noises such as
DVD-video, select “OFF”.
EN 75
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON EDITING
Guide to a Title List
Title list allows you to check the titles recorded on the
disc easily. You can choose a title to play back from this
list and easily edit the titles as you prefer.
1. Title name
2. Title information: Displays various information on
the selected title.
3. Title list: List of titles recorded on the HDD or disc.
Each title is indicated by its index picture. Index picture
for the selected title can be seen in motion. Following
icons may be displayed on the index picture.
• For the titles being blocked by the v-chip system
(except the downloaded ratings), “BLOCK” will be
displayed and you cannot watch the contents.
• If the title contains any part that is copy-protected,
the index picture will be black.
Press [HDD] or [DVD], then press [TOP MENU].
6
1
2
Title List
ORG
ABCDE
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
1
2
3
6
4
5
*
:
Indicating the title has never been played back yet.
: Indicating the title is protected.
* : Indicating the title is a copy-protected title.
: Indicating the title is a copy-once program.
1 / 6
*
1
4
3
5
4
I * : If you call up the title list while recording, “I”
will be displayed on the index picture of the
title currently being recorded.
Edit
ORG
* : Only available for HDD titles.
Scene Delete
Edit Title Name
Chapter Mark
Protect
2
4. Arrow: Indicating there is a previous / next page.
5. Title list page number: Current page / total pages.
6. Title list icon: Indicating a type of the displayed title list.
: HDD (Original) mode
: VR (Original) mode
: Video mode
: HDD (Playlist) mode
: VR (Playlist) mode
ORG
ORG
Video
PL
JAN/31/08 11:00PM CH13 LP
PL
0 : 00 : 59
7. Submenu: Submenus for the selected menu are
11 10
9
8
7
displayed here.
8. Title name (editable): If you do not name the title,
the recorded date, time, channel and the recording
mode are displayed here.
9. Progress bar: Indicating the progress of the playback.
10. Preview window: Preview of the selected title is
displayed here.
11. Playback status: Indicating the current playback
status of the selected title.
Press [RETURN
] to exit the title list.
About Editing
You will find editing discs is easy. This unit offers
convenient edit functions.
Available editing functions
• Assigning a name to a title
• Dividing a title
What “Original” or “Playlist” is for?
Throughout this manual, you will find original and playlist
which refer to the actual content and the edited version.
• Original content refers to what’s actually recorded on
the HDD and VR mode DVD-RW.
• Playlist content refers to the edited version of the HDD
and VR mode DVD-RW; how the original content is to be
played back.
• Combining titles
• Adding titles to a playlist
• Erasing all playlist
• Setting or releasing the title protection
• Adding or deleting chapter marks
• Deleting titles or parts of titles
(Possible editing functions depend on the recording
format and editing method.)
Finalizing a disc
• This will allow a disc that is recorded on this unit to be
played back on other DVD player — without finalization
it will not be playable on other DVD player.
• After finalizing video mode DVD-RW/-R, you cannot edit
any information that is on that disc.
Original and playlist
• If you have recorded in VR mode DVD-RW, then editing
is still permitted after finalizing.
For HDD and VR mode DVD-RW, you can edit the
recordings in playlist without changing the original
recordings. Playlist does not take up much disc space.
After you make a recording to HDD and VR mode
DVD-RW, a playlist will be created automatically.
Using these editing functions to modify copyrighted
content for any purpose other than your private viewing
may be prohibited under the Copyright Laws of the
United States and other countries, and may subject you
to civil and criminal liability.
76 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING TITLES
Notes for deleting titles
After the disc is fully recorded:
DVD-RW
DVD-R
• When a title is deleted from
DVD-RW in VR mode, the
recordable disc space will
be increased.
• When the last title is deleted from
DVD-RW in video mode, the recordable
space will be increased.
• When a title is deleted from
DVD-R, the recordable space
will NOT be increased.
The Full-Recorded disc
The Full-Recorded disc
The Full-Recorded disc
Delete!
Delete!
Delete!
Delete!
Deleted title
cannot create
the space.
You cannot
record
a new title.
You cannot
record
a new title.
You can record
a new title.
You can record
a new title.
Once all editings are made, press [RETURN
] in several times to exit the editing mode. “Writing to Disc” appears
momentarily. It also appears when pressing [AOPEN/CLOSE] or [POWER] before exiting the editing mode after
editing.
EN 77
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING TITLES
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back to the disc.
Be sure to read “Notes for deleting titles” on page 77
before you delete the title.
In stop mode, press [TOP MENU].
Title list, original or playlist will appear.
• For HDD and VR mode DVD-RW, press
1
2
[MENU/LIST] to switch between “Original” and
“Playlist”.
Use [K / L/s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Title List
ORG
CH
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
1
2
3
6
PQRS
WXYZ
CLEAR
4
5
SETUP
AUDIO REPEAT
HDMI
1 / 2
MENU/LIST
TOP MENU
Use [K / L] to select “Title Delete”,
then press [ENTER].
ENTER
3
4
Title List
ORG
DISPLAY
SKIP
RETURN
SKIP
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
1
4
2
3
6
VARIABLE
REPLAY
SKIP
Play From Start
Edit
Title Delete
PLAY
Add To Playlist
Dubbing
BX1.3/0.8
STOP
PAUSE
DVD
1 / 2
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Use [K / L] to select “Yes”, then press
[ENTER].
Title List
ORG
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
1
4
2
3
6
Delete this title?
Yes
No
1 / 2
After that, “Are you sure?” will appear, select
“Yes” and then press [ENTER].
Title will be deleted.
Press [RETURN ] or [STOP C] to
exit.
Data will be written onto the disc momentarily.
5
Writing to Disc
90%
This operation may take
awhile to be completed.
78 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING TITLES
Deleting Selected Titles
Use [K / L] to select “Delete Plural
Titles”, then press [ENTER].
You can delete titles which you do not need anymore.
Please be advised that the titles once deleted cannot be
brought back.
3
4
Resume Playback
Play From Start
Edit
Title Delete
Delete Plural Titles
Dubbing
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L / { / B] to select the title
you want to delete, then press
[ENTER].
CH
PQRS
WXYZ
CLEAR
Title List
PL
Title 1
12:00AM (1:00:00) JAN/ 1/08
CH10 SP
1
4
2
3
6
SETUP
AUDIO REPEAT
HDMI
5
MENU/LIST
TOP MENU
1 / 1
ENTER
Trash mark will appear indicating the title is
marked for deletion.
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
Repeat step 4 until you select all the
titles you want to delete.
REPLAY
SKIP
PLAY
5
Title List
PL
Title 1
12:00AM (1:00:00) JAN/ 1/08
CH10 SP
B
X
1.3/0.8
STOP
PAUSE
DVD
1
4
2
3
6
DUBBING
HDD
5
TIMER PROG.
REC MODE REC/OTR
1 / 1
To remove the trash mark from the title:
Select the title with the trash mark, then press
[ENTER].
Press [CLEAR].
Confirmation message will appear.
Press [HDD], then press [TOP MENU].
6
7
1
2
Use [K / L] to select “Yes”, then press
[ENTER].
Use [K / L / { / B] to select any title,
then press [ENTER].
e.g.) HDD Playlist
Title List
PL
Title 1
12:00AM (1:00:00) JAN/ 1/08
CH10 SP
1
4
2
3
Title List
PL
Title 1
12:00AM (1:00:00) JAN/ 1/08
CH10 SP
1
2
3
6
1 / 1
4
5
Final confirmation message will appear. Select
“Yes”, then press [ENTER].
1 / 1
Titles are now deleted.
EN 79
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING/DELETING PLAYLIST
Adding Titles to a Playlist
Follow the step 1 in “DELETING
TITLES” on page 78 to display the
original.
Original
Original
For HDD and VR mode DVD-RW, you can create the
playlist as you wish.
You can add up to 600(HDD) or 99(VR mode DVD-RW)
titles to a playlist.
1
2
3
Use [K / L/s / B] to select the
desired title, then press [ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “Add To
Playlist”, then press [ENTER].
e.g.) VR mode DVD-RW original
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
Title List
ORG
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
PQRS
WXYZ
CLEAR
1
2
3
6
Play From Start
Edit
Title Delete
4
Add To Playlist
Dubbing
SETUP
AUDIO REPEAT
HDMI
1 / 2
MENU/LIST
TOP MENU
Use [K / L] to select “Yes”, then press
[ENTER].
ENTER
4
5
Title List
DISPLAY
SKIP
RETURN
SKIP
ORG
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
VARIABLE
1
4
2
3
6
REPLAY
SKIP
Create a Playlist ?
PLAY
Yes
No
BX1.3/0.8
STOP
PAUSE
DVD
1 / 2
DUBBING
HDD
The title is added to playlist.
TIMER PROG.
REC MODE REC/OTR
Press [RETURN ] or [STOP C] to
exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Note
• To delete a title from the playlist, refer to “DELETING
TITLES” on pages 77-79.
• To delete all titles in the playlist, refer to “Erasing All
Playlist” on page 81.
• For VR mode DVD-RW, when a playlist contains 99
titles or 999 chapters, “Add to Playlist” cannot be
selected.
• For HDD, when a playlist contains 600 titles, “Add to
Playlist” cannot be selected.
80 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CREATING/DELETING PLAYLIST
Erasing All Playlist
Press [SETUP].
Main menu will appear.
Playlist
Playlist
A playlist can be deleted if it is no longer needed.
1
2
3
Use [K / L] to select “DVD Menu” (for
DVD) or “HDD Menu” (for HDD), then
press [ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Delete All
Playlist”, then press [ENTER].
e.g.) DVD
CH
DVD Menu
PQRS
WXYZ
CLEAR
Format
Finalize
Disc Protect OFF
ON
Delete All Playlists
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
Use [K / L] to select “Yes”, then press
[ENTER].
DISPLAY
SKIP
RETURN
SKIP
4
DVD Menu
VARIABLE
REPLAY
SKIP
Format
Finalize
Disc Protect OFF
Delete All Playl
Delete entire playlist?
PLAY
Yes
No
BX1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
“Are you sure?” will appear.
Use [K / L] to select “Yes” and then press
[ENTER].
DVD Menu
Format
Finalize
Disc Protect OF
Delete All Playl
Areyousure?
Yes
No
Playlist is deleted.
For DVD, data will be written onto the disc
momentarily.
This operation may take
awhile to be completed.
Note
• Deleting a playlist will not increase the available
recording time on the disc.
EN 81
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Putting Names on Titles
Use [K / L] to select “Edit Title
Name”, then press [ENTER].
You can put a name on the disc and change it from this
menu.
4
5
Edit
ORG
CLEAR
Scene Delete
1
Edit Title Name
Chapter Mark
Protect
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
ENTER
DISPLAY
SKIP
RETURN
SKIP
To enter a title name, follow the
steps of “Guide to Edit Title Name”
on page 83.
VARIABLE
REPLAY
SKIP
PLAY
Edit - Edit Title Name
ORG
A
a
B
b
2
!
C
c
3
?
1
BX1.3/0.8
STOP
PAUSE
DVD
character set
1
@
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
M
1 : 25 : 47
area for entering title names
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
When you finish entering a title name, press
[ENTER].
In stop mode, press [TOP MENU].
Use [K / L] to select “Yes”, then press
[ENTER].
Title list, original or playlist will appear.
• For HDD and VR mode DVD-RW, press
1
2
6
7
[MENU/LIST] to switch between “Original” and
Edit - Edit Title Name
ORG
“Playlist”.
Yes
1
No
Use [K / L/s / B] to select a desired
title, then press [ENTER].
e.g.) VR mode DVD-RW original
MY FAVORITE
Title List
ORG
1 : 25 : 47
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
The name you entered will be activated for the title.
1
2
3
6
Press [RETURN ] and then
4
5
[RETURN ] or [STOP C] to exit.
For DVD, data will be written onto the disc
momentarily.
1 / 2
This operation may take
awhile to be completed.
Use [K / L] to select “Edit”, then press
[ENTER].
3
Title List
ORG
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
1
4
2
3
6
Play From Start
Edit
Title Delete
Add To Playlist
Dubbing
1 / 2
82 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Putting Names on Titles (cont’d)
Guide to Edit Title Name
1)Use [K / L] to select a desired character set, then
press [ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
2)Follow the list below, use [the Number buttons]
repeatedly until the desired letter appears.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Select
ABC
abc
123
@ ! ?
Press
CH
<space>
<space>
<space>
0
PQRS
WXYZ
CLEAR
! ”# $ % & ’( )
+ , - . / : ; < = >
*
(*1)
(*1)
1
? @ [ ] ^ _ { | }
SETUP
AUDIO REPEAT
HDMI
(*2)
ABC
DEF
abc
def
2
3
4
5
6
7
8
9
(*2)
MENU/LIST
TOP MENU
(*2)
GHI
ghi
ENTER
(*2)
JKL
jkl
DISPLAY
SKIP
RETURN
SKIP
(*2)
MNO
PQRS
TUV
WXYZ
mno
pqrs
tuv
VARIABLE
REPLAY
SKIP
(*2)
PLAY
(*2)
BX1.3/0.8
STOP
PAUSE
DVD
(*2)
wxyz
DUBBING
HDD
*1 Press
, character set will be changed to the “ @!? ”
mode automatically.
to
TIMER PROG.
REC MODE REC/OTR
*2 Press
, character set will be changed to the
previous input mode automatically.
• To delete letters, press [CLEAR] repeatedly.
Press and hold [CLEAR] to delete all letters.
• Use [s / B] to move the cursor to the left and right.
• You can enter up to 30 letters.
Note
• Undefined letters in a title name are shown by “*”. If
you delete them, adjoining letters may change to “*”
or other.
EN 83
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Adding or Deleting Chapter Markers Manually
Follow steps 1 to 3 in “Putting Names
on Titles” on page 82 to display “Edit”
menu.
You can put chapter marks in each title. Once a chapter is
marked, you can use it for the chapter search feature.
1
2
3
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Submenu will appear.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [SKIP H / G], [REV E],
[FWD D], [VARIABLE SKIP ],
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
[VARIABLE REPLAY ], [PLAY B] and
[PAUSE F] to find the point where
you will create a new chapter mark.
Or, use [SKIP H / G] to find a
chapter mark that you wish to delete.
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
Use [K / L] to select “Add” or
“Delete”, then press [ENTER].
e.g.) VR mode DVD-RW original
MENU/LIST
TOP MENU
4
5
Edit - Chapter Mark
ORG
ENTER
Add
1
Delete
DISPLAY
SKIP
RETURN
SKIP
Chapter
2 / 3
VARIABLE
REPLAY
SKIP
PLAY
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
BX1.3/0.8
STOP
PAUSE
DVD
Use [K / L] to select “Yes”, then press
[ENTER].
If you select “Add” at step 4, a new chapter mark
will be added, and if you select “Delete” at step
4, the chapter mark will be deleted.
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
e.g.) Add
Edit - Chapter Mark - Add
ORG
Yes
1
No
Chapter
2 / 3
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
A new chapter mark will be added.
Press [RETURN ].
Note
6
7
• Maximum numbers of chapter for each media:
HDD : 99 chapters per title
Press [RETURN ] again and then
VR mode DVD : 999 chapters per entire original
and playlist
• Besides the above-mentioned, for DVD, it is not likely
to be able to add according to recorded time and
number of chapters.
[RETURN ] or [STOP C] to exit.
For DVD, data will be written onto the disc
momentarily.
This operation may take
awhile to be completed.
84 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting a Part of a Title
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 82 to
display “Edit” menu.
You can delete a specific part of a title.
Even when parts of title are deleted from the playlist, the
original title will remain as it is.
1
2
Use [K / L] to select “Scene Delete”,
then press [ENTER].
e.g.) VR mode DVD-RW playlist.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Edit
PL
CH
Scene Delete
1
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
PQRS
WXYZ
CLEAR
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
PLAY
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Note
• When a scene is deleted from an original, the playlist
related to the original will be deleted.
• For VR mode DVD-RW, you cannot select “Scene
Delete” if the number of chapter marks in the original
or playlist is 999. (Depends on the content, there is a
case that you cannot select “Scene Delete” before
the number of chapter marks reaches 999.)
• The recordable disc space will not increase even after
deleting a part of a title on the playlist.
Instructions continue on the next page.
EN 85
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting a Part of a Title (cont’d)
Use [K / L] to select “Delete” then
press [ENTER].
Use [SKIP H / G], [REV E],
[FWD D], [VARIABLE SKIP ],
4
5
3
[VARIABLE REPLAY ], [PLAY B] and
[PAUSE F] to find the start point,
then press [ENTER].
Edit - Scene Delete
PL
Start
1
End
Preview
Delete
Edit - Scene Delete
PL
Start
1
End
JAN/ 1/08 12:00AM CH10 LP
1 : 47 : 00
Preview
Delete
Use [K / L] to select “Yes” then press
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
[ENTER].
“Are you sure?” will appear. Select “Yes” using
Then use [SKIP H / G], [REV E],
[FWD D], [VARIABLE SKIP ],
[VARIABLE REPLAY ], [PLAY B] and
[PAUSE F] again to move to the end
point, and press [ENTER].
[K / L] and then press [ENTER].
Edit - Scene Delete
PL
Are you sure?
1
Yes
No
Edit - Scene Delete
PL
Start
1
JAN/ 1/08 12:00AM CH10 LP
1 : 50 : 00
End
Preview
Delete
The part of the title is deleted.
JAN/ 1/08 12:00AM CH10 LP
1 : 45 : 00
Press [RETURN ] and then
[RETURN ] or [STOP C] to exit.
The cursor will move to “Preview”.
For DVD, data will be written onto the disc
momentarily.
6
The bar at the bottom of the screen indicates the
total and the elapsed time of the title, and the
area selected for deletion is indicated in red.
You can check the preview by pressing [ENTER].
• Before and after 5 seconds of the deleted point
will be playback for preview.
This operation may take
awhile to be completed.
start point end point
Before
editing
Edited
86 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Dividing a Title
Playlist
Use [K / L] to select “Edit”, then
press [ENTER].
e.g.) VR mode DVD-RW playlist
You can divide one title into two new titles.
3
Title List
PL
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:00:00) JAN/ 1/08
CH10 LP
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
1
2
3
Play From Start
Edit
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Title Delete
Dubbing
4
6
CH
1 / 2
PQRS
WXYZ
CLEAR
Use [SKIP H], [SKIP G], [REV E],
[FWD D], [PAUSE F],
SETUP
AUDIO REPEAT
HDMI
4
[VARIABLE SKIP ],
[VARIABLE REPLAY ] and [PLAY B]
to decide the point at which you will
divide the title.
MENU/LIST
TOP MENU
ENTER
DISPLAY
SKIP
RETURN
SKIP
Use [K / L] to select “Title Dividing”,
then press [ENTER].
VARIABLE
REPLAY
SKIP
5
6
PLAY
Use [K / L] to select “Yes”, then press
[ENTER].
BX1.3/0.8
STOP
PAUSE
DVD
Edit - Title Dividing
PL
DUBBING
HDD
Yes
1
No
TIMER PROG.
REC MODE REC/OTR
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
If you edit the HDD, press [HDD] first.
If you edit a disc, press [DVD] first.
The title will be divided into two new titles.
Both title names are identical.
In stop mode, press [TOP MENU].
• For VR mode DVD-RW, press [MENU/LIST] to
Press [RETURN ] or [STOP C] to
exit.
select “Playlist”.
1
7
For DVD, data will be written onto the disc
momentarily.
Use [K / L/s / B] to select a desired
title, then press [ENTER].
Writing to Disc
90%
2
This operation may take
awhile to be completed.
Note
• You cannot divide a title of the disc when the
number of recording titles reaches the maximum of
600 (HDD), 99 (-RW), and the number of recording
chapters reaches the maximum of 999 (-RW).
• If there is not enough recordable space is left in HDD,
you can not divide a title of the HDD original.
EN 87
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Combining Titles
Use [K / L] to select “Title
Playlist
Playlist
Combining”, then press [ENTER].
You can combine two titles into a single title.
e.g.) VR mode DVD-RW playlist
2
Edit
PL
Scene Delete
1
Edit Title Name
Chapter Mark
Title Dividing
Title Combining
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
CH
Title combining setting window will appear.
Selected title grays out, and the frame of the
next title becomes yellow.
PQRS
WXYZ
CLEAR
Edit - Title Combining
PL
JAN/31/08 11:00PM CH13 LP
11:00PM (0:30:00) JAN/31/08
SETUP
AUDIO REPEAT
HDMI
CH13 LP
1
2
3
6
MENU/LIST
TOP MENU
1 +
4
5
ENTER
1 / 6
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
Use [K / L / { / B] to select another
REPLAY
SKIP
title to combine, then press [ENTER].
PLAY
Selection menu will appear.
3
4
BX1.3/0.8
STOP
PAUSE
DVD
Use [K / L] to select “Yes”, then press
[ENTER].
DUBBING
HDD
Edit - Title Combining
PL
JAN/31/08 11:00PM CH13 LP
TIMER PROG.
REC MODE REC/OTR
11:00PM (0:30:00) JAN/31/08
CH13 LP
1
2
3
6
1 + 2
Combine selected titles?
Yes
No
1 / 6
The two titles will combine into a single title.
Title List
PL
JAN/ 1/08 12:00AM CH10 LP
12:00AM (2:30:00) JAN/ 1/08
CH10 LP
1
2
3
6
4
5
Follow the steps 1 to 3 in “Dividing a
Title” on page 87 to display “Edit”
menu.
1 / 6
1
Press [RETURN ] or [STOP C] to
exit.
Note
For DVD, data will be written onto the disc
momentarily.
5
• You cannot select the same title twice and combine
it into a single title.
• If either one of the two original titles is deleted, the
combined new title is also deleted.
This operation may take
awhile to be completed.
88 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Setting or Releasing the Title Protection
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 82 to
display “Edit” menu.
Original
Original
To prevent the accidental editing, or erasing of the titles,
you can protect them in “Edit” menu.
You can cancel the title protection feature after it is
applied.
1
2
Use [K / L] to select “Protect”, then
press [ENTER].
e.g.) VR mode DVD-RW original
Edit
ORG
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Scene Delete
1
Edit Title Name
Chapter Mark
Protect
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
PQRS
WXYZ
CLEAR
• If the title is protected,
original list.
will appear in the
SETUP
AUDIO REPEAT
HDMI
Confirm the indication
“OFF ON”. Press [ENTER] again.
MENU/LIST
TOP MENU
• If the title is already protected, “ON OFF” will
appear. If you press [ENTER], the title will be
released from protection.
3
4
ENTER
DISPLAY
SKIP
RETURN
SKIP
Edit - Protect
ORG
OFF
ON
1
VARIABLE
REPLAY
SKIP
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
JAN/ 1/08 12:00AM CH10 LP
1 : 25 : 47
DUBBING
HDD
•
will appear on the title in the original list.
TIMER PROG.
REC MODE REC/OTR
Press [RETURN ] and then
[RETURN ] or [STOP C] to exit.
For DVD, data will be written onto the disc
momentarily.
This operation may take
awhile to be completed.
To protect a whole disc
(VR mode DVD-RW only):
Select “Disc Protect OFF ON” from the DVD
Menu, then select “Yes”.
Refer to “SETTING A DISC TO PROTECT” on
page 41.
EN 89
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Setting or Clearing All Chapter Marks at Once
Follow the steps 1 to 3 in “Putting
Names on Titles” on page 82 to
display “Edit” menu.
For titles in video mode DVD, you can set or edit chapter
at every time interval. You can clear the chapter mark too.
1
2
You can specify the interval of chapter marks for titles last
more than 5 minutes.
Use [K / L] to select “Chapter Mark”,
then press [ENTER].
Edit
Video
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Edit Title Name
1
Chapter Mark
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
JAN/ 1/08 12:00AM CH8 LP
1 : 25 : 47
PQRS
WXYZ
CLEAR
Use [K / L] to select the desired
interval, then press [ENTER].
SETUP
AUDIO REPEAT
HDMI
3
Edit - Chapter Mark
Video
MENU/LIST
TOP MENU
OFF
1
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
ENTER
DISPLAY
SKIP
RETURN
SKIP
JAN/ 1/08 12:00AM CH8 LP
1 : 25 : 47
VARIABLE
REPLAY
SKIP
PLAY
Use [K / L] to select “Yes”, then press
[ENTER].
Chapter marks are added.
If you select “OFF” at step 3, all the chapter
marks are erased.
B
X
1.3/0.8
STOP
PAUSE
DVD
4
5
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
Press [RETURN ] and then
[RETURN ] or [STOP C] to exit.
Data will be written onto the disc momentarily.
This operation may take
awhile to be completed.
Note
• You cannot select a chapter mark interval that
exceeds the length of a title.
• The length of chapters may slightly deviate from the
one specified at the step 3.
• A chapter mark may be delayed depending on the
recording content.
• Maximum number of chapter for video mode DVD is
99 chapters per title.
• The interval for auto chapter may be up to two
minutes different from the time option you set.
• You cannot add any chapters to the titles dubbed
from HDD to video mode DVD-RW by the high speed
dubbing.
90 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Deleting All Titles in HDD
Press [STOP C] if you are playing back an HDD or a disc.
Press [SETUP].
INPUT
OPEN/
1
2
3
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “HDD Menu”,
then press [ENTER].
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
PQRS
WXYZ
CLEAR
Use [K / L] to select the desired type
of deletion, then press [ENTER].
Select “Delete All Titles” if you want to delete all
titles including the ones protected.
Select “Delete All Unprotected Titles” if you want
to delete only the unprotected titles.
Select “Delete All Playlists” if you want to delete
all Playlists.
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
HDD Menu
ENTER
Delete All Titles
Delete All Unprotected Titles
Delete All Playlists
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
REPLAY
SKIP
PLAY
B
X
1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
Use [K / L] to select “Yes”, then press
[ENTER].
TIMER PROG.
REC MODE REC/OTR
4
Delete entire titles?
Yes
No
Final confirmation message will appear. Select
“Yes”, then press [ENTER].
Titles are now deleted.
EN 91
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Setup
Playback
Items (highlight is the default)
Parental Lock
→ page 96
Contents
Set the parental level for DVD playback.
OFF
level 8 [Adult] to
1 [Kid Safe]
Audio Out Dynamic Range Control
→ page 97
Compressing the range of sound volume.
ON
OFF
PCM
Set whether the sound recorded in 96kHz will be
down sampled in 48kHz.
48kHz
96kHz
PCM
Dolby Digital
Set the type of sound signal which outputs from
the digital audio output jack.
Stream
Disc Menu Language
→ page 97
Set the language for disc menu language.
English
French
Spanish
Other
Audio Language
→ page 97
Set the language for audio.
Original
English
French
Spanish
Other
Subtitle Language
→ page 98
Set the language for subtitles.
OFF
English
French
Spanish
Other
Angle Icon
Set whether to display the angle icon or not.
Set the type of still image in pausing playback.
ON
OFF
→ page 98
Still Mode
→ page 98
Auto
Field
Frame
Variable Skip / Replay
→ page 98
Variable Skip
5 seconds
Set the amount of skip time when you press
[VARIABLE SKIP ].
15 seconds
30 seconds
1 minute
5 minutes
Variable Replay
5 seconds
Set the amount of rewind time when you press
[VARIABLE REPLAY ].
15 seconds
30 seconds
1 minute
5 minutes
Display
OSD Language
Set the language for OSD (on-screen display).
Set the idling time before the screen saver starts.
English
Français
Español
OFF
5minutes
→ page 99
Screen Saver
→ page 99
10minutes
15minutes
30miniutes
FL Dimmer
Auto
Bright
Dark
Set the brightness of the front panel display.
Set the type of the DTV closed caption.
→ page 99
DTV CC
Caption Service
→ page 36
OFF
Service1
Service2
Service3
Service4
Service5
Service6
Recording
→ page 45
ON
OFF
Set whether to record the DTV closed caption or
not.
92 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
Setup
Display
Items (highlight is the default)
CC Style
Contents
User Setting
→ page 37
ON
Set the CC style setting whether or not is effective.
OFF
Font Size
Large
Middle
Small
Set font size of the displayed caption.
Set font style of the displayed caption.
→ page 38
Font Style
→ page 38
Style1
Style2
Style3
Style4
Style5
Style6
Style7
Style8
Font Opacity
Set the font opacity of the displayed caption.
Set the font color of the displayed caption.
Solid
→ page 38
Transparent
Translucent
Flash
Font Color
→ page 38
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Edge Type
Set edge type of the displayed caption.
Set edge color of the displayed caption.
None
Raised
Depressed
Uniform
L.Shadow
R.Shadow
→ page 38
Edge Color
→ page 38
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
Back Opacity
Set back opacity of the displayed caption.
Set back color of the displayed caption.
Solid
→ page 38
Transparent
Translucent
Flash
Back Color
→ page 38
White
Black
Red
Green
Blue
Yellow
Magenta
Cyan
V-Chip
MPAA Rating
→ page 100
X
Set the viewing limitation according to US movie
ratings.
NC-17
R
PG-13
PG
G
NR
TV Rating
→ page 100
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
Set the viewing limitation according to US TV
program ratings.
NR
Canadian French Rating 18 ans+
Set the viewing limitation according to Canadian
French language Ratings.
→ page 100
16 ans+
13 ans+
8 ans+
G
E
EN 93
Download from Www.Somanuals.com. All Manuals Search And Download.
LIST OF THE DEFAULT SETTINGS
Setup
Display
Items (highlight is the default)
V-Chip
Contents
Canadian English Rating 18+
Set the viewing limitation according to Canadian
English language Ratings.
→ page 101
14+
PG
G
C8+
C
E
Downloadable Rating
→ page 101
BLOCK SETTING
CLEAR
DOWNLOADABLE RATING
To set the rating.
Clear the downloadable rating information and its
setting.
Change Password
→ page 101
Change the password.
Video
Progressive
→ page 102
ON
OFF
Set to the progressive scan mode (set to "ON") or
to the interlace scan mode (set to "OFF").
TV Aspect
→ page 102
Set a picture size according to aspect ratio of your
TV.
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Select Video L1(Rear)
Set the video input type for the external input.
Insert chapter marks at even time interval.
Video In
S-Video In
→ page 53
L2(Front)
Video In
S-Video In
OFF
5 minutes
Recording
Auto Chapter
→ page 45
10 minutes
15 minutes
30 minutes
60 minutes
Auto
Finalize
→ page 42
Disc Full
ON
OFF
ON
Set the unit to finalize the disc automatically.
End of Timer Rec
OFF
Clock
Set the clock.
Clock Setting → page 32
Auto Clock Setting
→ page 31
OFF
Auto
Set the clock automatically.
Manual
Daylight Saving Time
→ page 32
Set the clock for the daylight saving time.
ON(MAR-NOV)
ON(APR-OCT)
OFF
Channel
HDMI
Auto Preset
Air
Tune the channels automatically.
Tune the channels manually.
Set the analog TV audio type for output and video
mode.
→ page 28
Cable
Cable (Extended Scan)
Manual Preset → pages 29-30
TV Audio Select
→ page 35
Stereo
SAP
Format
→ page 103
Set the color space for the HDMI output.
RGB
YCbCr
HDMI Audio
→ page 103
Set whether to output the HDMI audio signal or
not.
ON
OFF
RGB Range
→ page 103
Set the black-white contrast level for HDMI RGB
output.
Normal
Enhanced
Reset All
→ page 104
Yes
No
Set to the default setting.
Note
• Your change to each settings stays on even when the power is off.
• An item which is not currently available is grayed in the settings.
94 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback
Press [STOP C] if you are playing back an HDD or a disc.
Press [SETUP] and use [K / L] to
select “General Setting“, then press
[ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
1
2
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Use [K / L] to select “Playback”, then
press [ENTER].
CH
PQRS
WXYZ
CLEAR
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
Use [K / L] to select a desired item,
then press [ENTER].
DISPLAY
SKIP
RETURN
SKIP
VARIABLE
3
REPLAY
SKIP
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
1
2
3
4
5
6
7
8
PLAY
BX1.3/0.8
STOP
PAUSE
DVD
Still Mode
Variable Skip / Replay
DUBBING
HDD
Submenu will appear.
TIMER PROG.
REC MODE REC/OTR
Refer
set the selected item.
to
on pages 96 to 98 and
1
8
4
5
When you finish with the setting,
press [SETUP] to exit.
EN 95
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback (cont’d)
Parental Lock (Default: OFF)
A password has not been set yet.
1
A
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from
viewing inappropriate material.
Use [K / L] to select “Yes”, then press [ENTER]. Use
[the Number buttons] to enter a new password except
for 4737, then press [ENTER].
General Setting
General Setting
Parental Lock
ck
Parental Lock
ck
Playback
Display
Video
Recording
Clock
Channel
HDMI
Playback
Display
Video
Recording
Clock
Channel
HDMI
OFF
OFF
Use [K / L] to select the desired level, then press
[ENTER].
8 [Adult]
Change Password?
uage
anguage
Password Input
Yes
e
No
4 [PG 13]
Reset All
Reset All
3 [PG]
3 [PG]
General Setting
Yes
ip / Replay
p / Replay
2 [G]
2 [G]
1 [Kid Safe]
1 [Kid Safe]
Parental Lock
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
ck
OFF
8 [Adult]
Language
7 [NC 17]
uage
6 [R]
Your setting will be activated.
A password has been set already.
guage
5 [PG R]
4 [PG 13]
3 [PG]
p / Replay
2 [G]
B
1 [Kid Safe]
• Use [the Number buttons] to enter the current
password.
If a password has not been set yet, proceed to
If a password has been set already, proceed to
.
.
A
B
General Setting
Parental Lock
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
ck
OFF
8 [Adult]
anguage
RATING EXPLANATIONS
• OFF : Parental Control is inactive; all discs can play.
Password Input
3 [PG]
ip / Replay
2 [G]
• 8 [Adult]: DVD software of any grades (adult/general/
children) can be played back.
1 [Kid Safe]
• 7 [NC 17]: No one under 17 admitted.
• 6 [R]: Restricted; under 17 requires accompanying
parent or adult guardian.
• 5 [PG R]: Parental Guidance Recommended.
• 4 [PG 13]: Unsuitable for children under 13.
• 3 [PG]: Parental Guidance suggested.
• 2 [G]: General Audience.
Your setting will be activated.
• If you want to change password, use [K / L] to select
“Yes” then press [ENTER]. Use [the Number buttons]
to enter a new password, then press [ENTER].
<change the password>
General Setting
General Setting
Parental Lock
ck
Parental Lock
ck
Playback
Display
Video
Recording
Clock
Channel
HDMI
Playback
Display
Video
Recording
Clock
Channel
HDMI
• 1 [Kid Safe]: Suitable for children.
OFF
OFF
8 [Adult]
Change Password?
uage
anuage
Password Input
Yes
e
No
4 [PG 13]
Note
Reset All
3 [PG]
Reset All
3 [PG]
Yes
ip / Replay
p / Replay
2 [G]
2 [G]
• Parental lock function may not be available to some
discs.
1 [Kid Safe]
1 [Kid Safe]
• With some DVD, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you
have set.
Your setting will be activated.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• Record the password in case you forget it.
• When you forget the password or you want to clear
all settings in “Parental Lock” menu, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared and parental levels
will be set to “OFF”.
• If there is a DVD in the unit when you set up the
parental lock, press [OPEN/CLOSE A] to activate the
parental lock level.
96 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback (cont’d)
Audio Out
Settings for Dolby Digital (Default : Stream)
2
C
Choose the appropriate audio setting for your external device.
Use [K / L] to select a setting, then press [ENTER].
It will only affect a disc playback.
General Setting
Playback
Display
Video
Recording
Clock
Use [K
/
L
] to select a desired item, then press [ENTER].
Parental Lock
Audio Out
General Setting
ge
Dolby Digital
D
PCM
P
Playback
Display
Video
Recording
Clock
Channel
HDMI
Channel
HDMI
Reset All
Stream
D
Parental Lock
Still Mode
Variable Skip / Replay
Audio Out
ge
A
B
C
Dynamic Range Control
PCM
Dolby Digital
Reset All
Still Mode
Variable Skip / Replay
Your setting will be activated.
PCM
: Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to “PCM”.
Dynamic Range Control (Default : ON)
A
Stream : Outputs Dolby Digital signals.
Set to “ON” to compress the range between soft and loud sounds.
Use [K / L] to select a setting, then press [ENTER].
When your amplifier/decoder is compatible
with Dolby Digital, set to “Stream”.
General Setting
Disc Menu Language (Default : English)
3
Playback
Display
Video
Recording
Clock
Channel
HDMI
Parental Lock
ge
Set the language for disc menu.
Use [K / L] to select a language, then press [ENTER].
Audio Out
Dynamic Range Control
D
P
D
ON
OFF
Reset All
Still Mode
General Setting
Variable Skip / Replay
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Parental Lock
guage
Disc Menu Language
English
ge
French
age
Your setting will be activated.
Spanish
Other
Variable Skip / Replay
Note
• Dynamic range control function is available only on
the discs which are recorded in the Dolby Digital
format.
Your setting will be activated.
Audio Language (Default : Original)
4
Settings for PCM (Default : 48kHz)
B
Set the audio language.
Use [K / L] to select a language, then press [ENTER].
Use [K / L] to select a setting, then press [ENTER].
General Setting
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Playback
Display
Video
Recording
Clock
Channel
HDMI
Parental Lock
Parental Lock
Audio Out
PCM
ge
Audio Language
D
guage
Original
48kHz
P
ge
English
96kHz
D
age
French
Still Mode
Variable Skip / Replay
Reset All
Spanish
Reset All
Replay
Other
Your setting will be activated.
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select “48kHz”. 96kHz sound
will be output in 48kHz.
• When “Original” is selected, the audio language will be
in the disc’s default language.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select “96kHz”. 96kHz sound will
be output.
Note
When playing back disc with copyright protection
• Even if you select “96kHz”, the sound will be down
sampled at 48kHz.
EN 97
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Playback (cont’d)
Subtitle Language (Default : OFF)
Still Mode (Default : Auto)
5
7
Set the subtitle language.
Select “Auto” usually.
Use [K / L] to select a language, then press [ENTER].
Use [K / L] to select a setting, then press [ENTER].
General Setting
General Setting
Playback
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Parental Lock
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Parental Lock
guage
ge
age
Subtitle Language
Still Mode
guage
e
OFF
English
Auto
Field
Frame
age
French
Spanish
Still Mode
Variable Skip / Replay
Other
Replay
Your setting will be activated.
If “Other” is selected for
Your setting will be activated.
Auto
: Optimum resolution setting (“Field” or
to
, press 4-digit code
3
5
“Frame”) will be selected.
using [the Number buttons].
Field
: Images in the still mode will be stabilized.
Frame : Images in the still mode will be highly defined.
Code Input
-
-
-
-
Note
•
Frame is one completed video image made up of two
fields (There are 30 frames per second of NTSC video).
• When you finish entering the code, press [ENTER].
Refer to the language code table on page 110.
Note
Variable Skip / Replay
8
• Only the languages supported by the disc can be
selected.
Assign [VARIABLE SKIP ] or [VARIABLE REPLAY ] to
skip or rewind by a certain amount of time when they are
pressed.
• Audio language setting may not be available to
some discs.
• You can also change or switch off the subtitles on a
DVD from the disc menu if it is available.
Use [K / L] to select a desired item, then press
[ENTER].
• Press [CLEAR] to erase numbers entered incorrectly.
Variable Skip
Variable Replay
A
B
Angle Icon (Default : ON)
6
Refer to the explanations below and set the selected item.
Set to “ON” to show the angle icon during the playback.
Use [K / L] to select a setting, then press [ENTER].
Variable Skip (Default: 30 seconds)
A
Sets the amount of skip time for [VARIABLE SKIP ].
General Setting
Variable Skip
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Parental Lock
Audio Out
guage
e
age
5
seconds
15 seconds
30 seconds
1
5
Angle Icon
ON
OFF
minute
minutes
Still Mode
Variable Skip / Replay
Variable Replay (Default: 30 seconds)
B
Your setting will be activated.
Sets the amount of rewind time for [VARIABLE REPLAY ].
Variable Replay
5
seconds
15 seconds
30 seconds
1
5
minute
minutes
98 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Display
OSD Language (Default : English)
1
Set the language for the on-screen display.
INPUT
OPEN/
Use [K / L] to select a language, then press [ENTER].
POWER DTV/TV SELECT CLOSE
General Setting
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
Playback
Display
Video
Recording
Clock
Channel
HDMI
OSD Language
OSD Language
English
CH
Français
Español
PQRS
WXYZ
CLEAR
Reset All
SETUP
AUDIO REPEAT
HDMI
Your setting will be activated.
Screen Saver (Default : 10 minutes)
MENU/LIST
TOP MENU
2
Set the time to activate the screen saver function on the
TV screen.
Use [K / L] to select a setting, then press [ENTER].
ENTER
DISPLAY
SKIP
RETURN
SKIP
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
VARIABLE
OSD Language
REPLAY
SKIP
Screen Saver
OFF
PLAY
5 minutes
10 minutes
15 minutes
30 minutes
Reset All
BX1.3/0.8
STOP
PAUSE
DVD
DUBBING
HDD
Your setting will be activated.
TIMER PROG.
REC MODE REC/OTR
FL Dimmer (Default: Bright)
3
Set the front panel display brightness.
Use [K / L] to select a setting, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
OSD Language
FL Dimmer
Press [STOP C] if you are playing back an HDD or a disc.
Auto
Bright
Dark
Reset All
Press [SETUP] and use [K / L] to
select “General Setting”, then press
1
2
3
[ENTER].
You can choose one from “Auto”, “Bright” or “Dark”.
If “Auto” is selected, the display gets dark when the
power is off.
Use [K / L] to select “Display”, then
press [ENTER].
DTV CC
4
Refer to “DTV Closed Caption” and “Recording the DTV
Closed Caption” on page 36 and 45.
Use [K / L] to select a desired item,
then press [ENTER].
CC Style
5
OSD Language
Screen Saver
FL Dimmer
DTV CC
CC Style
V-Chip
1
2
3
4
5
6
Refer to “Closed Caption Style“ on pages 37-38.
Submenu will appear.
EN 99
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Display (cont’d)
V-Chip
MPAA Rating
6
A
With the v-chip system in this unit, you can set the
viewing limitation for the analog/digital TV programs
received from the tuner or recorded on DVDs to prevent
your children from watching inappropriate programs. If
the unit detects a blocked program, a restriction message
appears and you are not allowed to view or record the
program.
TV Rating
B
C
D
Canadian French Rating
Canadian English Rating
You can set the viewing limitation according to MPAA
rating (US movie ratings), TV Rating (US TV program
ratings), Canadian French Rating (Canadian French
language Ratings), Canadian English Rating (Canadian
English language Ratings).
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use [the
Number buttons] to set the access password, then
press [ENTER]. The number you entered will be stored
as the access password.
1) Use [K / L] to select the desired rating, then press
[ENTER] repeatedly to switch between view and
block. When it is blocked a key icon will appear.
General Setting
e.g.) MPAA rating
Playback
Display
Video
Recording
Clock
Channel
HDMI
OSD Language
Screen Saver
FL Dimmer
General Setting
Password Input
Playback
Display
Video
Recording
Clock
Channel
HDMI
OSD Language
Screen Saver
MPAA Rating
V-Ch
Reset All
X
MP
NC-17
TV
R
Caning
PG-13
Reset All
Canting
PG
Dowg
G
Cha
NR
2) Use [K / L] to select a desired item, then press
[ENTER].
[MPAA Rating]
Rating
General Setting
Category
Playback
Display
Video
Recording
Clock
Channel
HDMI
OSD Language
Screen Saver
X
Mature audience only
higher
V-Chip
NC-17
No one under 17 admitted
A
B
C
D
E
MPAA Rating
TV Rating
Canadian French Rating
Canadian English Rating
Downloadable Rating
Change Password
Restricted; under 17 requires
accompanying parent or adult guardian
Reset All
R
F
PG-13
PG
Unsuitable for children under 13
Parental guidance suggested
General audience
G
NR
No rating
lower
[TV Rating]
Rating
TV-MA
TV-14
TV-PG
TV-G
Category
Mature audience only
higher
Unsuitable for children under 14
Parental guidance suggested
General audience
TV-Y7
TV-Y
Appropriate for all children 7 and older
Appropriate for all children
No rating
NR
lower
[Canadian French Rating]
Rating
Category
18 ans+
16 ans+
13 ans+
8 ans+
G
Adult audience only
higher
Unsuitable for ages under 16
Unsuitable for ages under 13
Unsuitable for ages under 8
General audience
E
Exempt program
lower
100 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Display (cont’d)
[Canadian English Rating]
Rating
Downloadable Rating
E
Category
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
This feature is available only after the digital TV
ratings have been downloaded
• The ratings can be downloaded by the unit
automatically if it is available in your area.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
18+
14+
PG
G
Adult audience only
higher
Unsuitable for ages under 14
Parental guidance suggested
General audience
C8+
C
For children over 8
For all children
E
Exempt program
lower
As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you
can further set the sub ratings to block specific
elements of programming. Press [K / L/ { / B] to select
the desired rating or sub rating, then press [ENTER]
repeatedly to switch between view and block. Sub
rating status will appear on the side of the main rating.
Downloadable Rating is currently
not available.
• This message will also appear when you try to access
“DOWNLOADABLE RATING“ after you have cleared the
downloadable rating information, and the new
information has not been downloaded.
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
TV Rating
To set the rating:
FV
V
S
L
D
TV-MA
Use [K / L] to select “BLOCK SETTING” then press
[ENTER] to show the various types of ratings. Use [K / L]
to select a desired rating to set, then press [ENTER] to
show the levels for the rating. Use [K / L] to select a level,
then press [ENTER] to switch “VIEW” or “BLOCK”. If you
set one level to “BLOCK”, all the higher levels will be
turned to “BLOCK” automatically.
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
NR
Sub Rating
Category
Rating
TV-Y7
FV
V
Fantasy Violence
Violence
Note
• Depending on the type of rating system, you may set
the levels individually.
• The downloaded rating does not block the DVD
contents.
TV-PG
TV-14
TV-MA
S
Sexual Situation
Coarse Language
Suggestive Dialogue
L
D
TV-PG, TV-14
To clear the downloadable rating information and its
setting:
Use [K / L] to select “CLEAR DOWNLOADABLE RATING”,
then press [ENTER].
Note
• Changing the main rating to block or view
automatically changes all its sub ratings to the same
(block or view).
Change Password
F
Change the current password.
Use [the Number Buttons] to enter new access
password.
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• When you forgot the access password, enter 4,7,3,7
using [the Number buttons] in password input
window. Password will be cleared.
Press [SETUP] to exit.
4
EN 101
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Video
Progressive (Default : OFF)
1
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
1) Use [K / L] to select “ON“, then press [ENTER].
CH
General Setting
Playback
PQRS
WXYZ
CLEAR
Display
Video
Recording
Clock
Channel
HDMI
Progressive
Progressive
ON
OFF
SETUP
AUDIO REPEAT
HDMI
2) Use [{ / B] to select “Yes“, then press [ENTER].
General Setting
MENU/LIST
TOP MENU
P
Activating progressive scan:
D
Check your TV has progressive scan
V
and connect with component video cable.
R
C
ENTER
C
NOTE :
H
R
If there is no picture or picture is
distorted after selecting “Yes”,
DISPLAY
SKIP
RETURN
SKIP
Wait about 15 seconds for auto recovery.
Activate?
Yes
No
VARIABLE
REPLAY
SKIP
3) Use [K / L] to select “Yes“ within 15 seconds, then
press [ENTER].
PLAY
Your setting will be activated.
B
X
1.3/0.8
STOP
PAUSE
DVD
Note
DUBBING
HDD
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to “Method 3” on page 20 or page 21.) If not, use
the RCA video cable and set the progressive scan to “OFF”.
Press [STOP C] if you are playing back an HDD or a disc.
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during HDD/DVD
playback. The “Progressive” setting will be “OFF”.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
Press [SETUP] and use [K / L] to
select “General Setting”, then press
[ENTER].
1
2
3
Use [K / L] to select “Video”, then
press [ENTER].
TV Aspect (Default: 4:3 Letter Box)
2
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [K / L] to select a desired item,
then press [ENTER].
Use [K / L] to select a desired option, then press [ENTER].
1
2
3
Progressive
TV Aspect
Select Video
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Progressive
Submenu will appear.
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
Refer
the selected item.
to
on this page and set
1
2
Reset All
If you have a standard TV:
4
5
• For
, refer to “Connection to an External
3
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
Device“ on page 53.
When you finish with the setting,
press [SETUP] to exit.
102 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
HDMI
Format (Default : RGB)
1
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [K / L] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr, HDMI signal is output as RGB regardless of the
setting.
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
General Setting
PQRS
WXYZ
CLEAR
Playback
Display
Video
Recording
Clock
Channel
HDMI
Format
Format
RGB
YCbCr
SETUP
AUDIO REPEAT
HDMI
Reset All
MENU/LIST
TOP MENU
Your setting will be activated.
ENTER
HDMI Audio (Default : ON)
2
DISPLAY
SKIP
RETURN
SKIP
If you do not want to output the audio through HDMI
(when you digitally output the audio through the
COAXIAL DIGITAL AUDIO OUTPUT jack to your audio
system, etc.), you can set the HDMI audio output off.
VARIABLE
REPLAY
SKIP
PLAY
Use [K / L] to select a setting, then press [ENTER].
• Set to “OFF” when the HDMI sound is not output.
General Setting
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
then press [ENTER].
Playback
Display
Video
Recording
Clock
Channel
HDMI
Format
HDMI Audio
1
2
ON
OFF
Reset All
Use [K / L] to select “HDMI”, then
press [ENTER].
General Setting
Your setting will be activated.
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
RGB Range (Default : Normal)
3
You can adjust the RGB range to make the dark areas of
the HDMI images brighter.
Use [K / L] to select a setting, then press [ENTER].
• Select “Enhanced“ if the black-white contrast is not clear.
• This setting is effective only for HDMI RGB output.
• You cannot select HDMI when an HDMI cable is
not connected and the items are shown in grey
color.
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Format
RGB Range
Normal
Enhanced
Use [K / L] to select a desired item,
then press [ENTER].
Reset All
3
4
Format
HDMI Audio
RGB Range
1
2
3
Your setting will be activated.
When you finish with the setting,
press [SETUP] to exit.
EN 103
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SETTING
Reset All
Reset the setting to default.
Press [SETUP] in stop mode and use
[K / L] to select “General Setting”,
1
2
then press [ENTER].
INPUT
OPEN/
POWER DTV/TV SELECT CLOSE
Use [K / L] to select “Reset All”, then
press [ENTER].
.@/:
GHI
ABC
JKL
TUV
DEF
MNO
CH
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
PQRS
WXYZ
CLEAR
SETUP
AUDIO REPEAT
HDMI
MENU/LIST
TOP MENU
ENTER
Select “Yes” using [K / L] , then press
[ENTER].
DISPLAY
SKIP
RETURN
SKIP
3
General Setting
VARIABLE
REPLAY
SKIP
Playback
Display
Video
Reset to factory default?
PLAY
Recording
Clock
Channel
HDMI
Yes
No
BX1.3/0.8
STOP
PAUSE
DVD
Reset All
DUBBING
HDD
TIMER PROG.
REC MODE REC/OTR
“Are you sure?” will appear. Select “Yes” using
[K / L] and then press [ENTER].
Your setting will be initialized.
Note
• The settings listed below will remain unchanged
even after resetting to the factory default.
- Clock setting
- Channel setting
- OSD language setting
- Parental lock setting
- V-Chip setting
- Timer programs
104 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.
Symptom
Remedy
The power does not turn on.
• Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
The unit turns on automatically
without any operation.
• The unit turns on automatically 2 seconds before the timer recording.
The unit does not function.
• “ ” or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted.
No picture, sound or menu appears on • Check if the connections are made securely and correctly.
the screen.
• Check if the cables are damaged.
• Check if a correct external input channel is selected on your TV. (Refer to
page 27.)
• Check if you have completed the channel setting. (Refer to pages 28 to 30.)
Clock setting and channel setting
cannot be performed.
• If a recording is in progress, these operations cannot be performed.
The unit does not operate properly.
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates. (Refer to
page 4.)
The clock display does not appear in
the front panel display.
• Check that the AC power cord is connected securely.
• (In case of power failure) Check the breaker and clock setting.
When you forget the password for
parental lock.
• Please cancel the password and the set level. (Refer to page 96.)
No analog TV closed captions are
output.
• If you are using HDMI connection to watch the TV programs through
this unit’s tuner, analog TV closed caption cannot be output. Try using
other connection.
DV signal cannot be input.
• Before connection, turn on the power supplies for both this unit and the
DVC, and make sure that these units have stopped.
• Only a “DVC-SD” signal can be input from the DVC to this unit. Other
types of signals are not supported.
• Do not connect any device other than the DVC. Even if a recorder or PC
with another DV terminal is connected, the DV function will not operate.
• If the DVC is not recognized after connection, turn off the power supply
for the unit and re-connect the DVC.
The DVC cannot be operated with this • Signal input or DVC operation from this unit may be disabled
unit.
depending on the type of DVC.
• If a DVC signal cannot be input, use an external input (L1/L2) for analog
connection via audio/video cables.
• DVC control may be disabled depending on the type of DVC, even in a
mode other than camera mode. In this case, switch to HDD/DVD control
and execute the normal recording procedure while operating the DVC.
Certain functions of the DVC cannot
operate.
• Some functions may not operate depending on the type of DVC. For
example, if the DVC does not support slow playback mode, the slow
playback function is disabled.
• With L3(DV-IN), the disc display menu does not appear unless disc
playback is executed.
DV audio signal cannot be switched.
No image from HDMI connection.
• For recording with the DVC, the recording audio signal can be set to 12
bits or 16 bits. However, when 16-bit recording mode is selected, audio
signal cannot be switched. To record an audio signal, set it to 12 bits.
• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
EN 105
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TV channels cannot be changed.
• Check if the connections are made securely and correctly.
• Check if the cables are damaged.
• Try channel setting by following the steps on pages 28 to 31.
Only specific channels do not appear. • The channels may be set to be skipped. (Refer to pages 29-30.)
The external input channels (such as
L1, L2 or L3) cannot be skipped.
• This unit does not skip the external input channels. This is not a
malfunction.
The image from the external device • Try pressing [INPUT SELECT] repeatedly.
cannot be displayed.
• Turn on all connected devices.
• Check if the connections are made securely and correctly.
Some part of the recorded content • When you record the copy-protected programs, part of the recorded
has no image and sound.
Recording is impossible.
content may has no image and sound.
• It is prohibited to make a recording from 2 minutes before the
programmed start time of a timer recording.
• This unit cannot record programs that contain copy protection signal.
This is not a malfunction.
• The space of the recording media may be used up. Try deleting
unnecessary titles, or exchange it with the recordable media.
• The maximum number of titles or chapters has exceeded. Delete the
unnecessary titles to make enough space or insert a new recordable media.
• Check if the connections are made securely and correctly.
• Check the external input channel.
Timer recording cannot be
performed.
• The internal clock of the unit may have been stopped due to a power
failure that lasted for more than 30 seconds. Reset the clock. (Refer to
pages 31 to 32.)
The picture of the autostart
recording disappears.
• The contents of the autostart recording will be cleared in some cases
(Changing input channel etc.). Refer to page 48.
When playing back the title
recorded from the autostart
recording, the DTV program
information is displayed and it
cannot be disappeared.
• In the autostart recording, when you display the DTV program
information, the information will be recorded as the part of the picture.
“Repairing” appears on the TV
screen.
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
Repairing
In a case you intend to cancel the
repairing process.
• If you intend to cancel the repairing process, press [A OPEN/CLOSE]
on the front panel, then select “Yes” and press [ENTER]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Do you want to cancel a repairing
process? When selecting “Yes”,
the disc may not be usable.
Yes
No
Repairing
Recording is impossible.
• Check if the disc is protected or finalized. Undo the protection or the
finalization.
• Video mode DVD-RW once formatted on other unit cannot be recorded
on this unit unless all the contents in the disc are erased.
• Check if the connections are made securely and correctly.
Writing to Disc
100%
The indication
• “
” may remain on screen for the
Writing to Disc
100%
“
”
maximum of 20 seconds even after it reached 100%. This is not a
malfunction.
does not disappear.
106 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TV aspect ratio does not match
your TV screen.
• Check the TV Aspect Ratio. (Refer to page 102.)
• A different aspect ratio will be used when the aspect ratio specified by
the disc is not supported by this unit.
Playback picture is distorted.
Color of the picture is abnormal.
• During fast forward or fast reverse, playback picture may be distorted.
This is not a malfunction.
• Connect to TV directly. When you connect this unit with the television
via VCR or other devices, the picture may be distorted due to the copy-
protection signal.
• Check if the cables are damaged.
• Keep the equipment which may cause electrical disturbances, such as a
cellular phone, away.
There is no sound, or no subtitle.
• Turn on all connected devices.
• Check if the external input channel is set correctly.
• Check if the connections are made securely and correctly.
• If using the HDMI connection, sound is not output when “HDMI Audio”
is set to “OFF”.
• Check the RCA audio cable connection. If you are using HDMI-DVI
conversion cable, you must connect the RCA audio cable, too.
• If using the HDMI connection, check whether the output format of this
unit (HDMI FORMAT) matches the supported input format of other
connected device.
Playback does not start from the
beginning.
• Resume function may be activated. Refer to page 67 to cancel the
resume point.
Playback image freezes for a
second.
• During the playback of 2 layered disc, picture may freeze for a moment
when the 1st layer switches to the 2nd layer. This is not a malfunction.
Playback cannot be performed.
• Check if the playable disc is inserted.
• Check if the disc is loaded correctly with the labeled side facing up.
• Discs made on other devices or on personal computers cannot be
played back on this unit unless it is finalized on the device.
Even if it is finalized, the performance of those discs are not guaranteed
on this unit.
• The disc may be dirty or flawed. Clean the disc.
• Check if all the connections are made correctly.
• Check the parental lock setting. (Refer to page 96.)
• Playback of DVD is prohibited from 2 minutes before the programmed
start time of a timer recording when the recording media is DVD.
There is no sound, or no subtitle.
• Check if the “Audio Out” is set correctly. (Refer to page 97.)
• There is a possibility that the selected subtitle language is not
supported by the disc.
Digital audio setting cannot be
changed to main audio (L), sub
audio (R) or combination of both.
• If the audio source is in the Dolby Digital format, set the Dolby Digital
Setting to “PCM” in “Playback” menu. (Refer to page 97.)
Audio language or the subtitle
language of the DVD cannot be
changed.
• Multilingual subtitles are not supported by the disc.
• Some audio languages or the subtitle languages can be changed only
from the disc menu. Please refer to the disc’s manual.
Camera angles cannot be changed. • Even though the multi-angle feature is supported by the disc, that does
not mean all the scenes are shot from multi-angles. Changing angles are
available only for those scenes shot from the multi-angle.
The disc cannot be played back on • Some DVD players do not play back the disc made on other recorder.
other player even though it is
finalized properly.
Refer to the manual of the unit.
EN 107
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Titles cannot be edited or deleted. • The titles or the disc itself may be protected. Cancel the protection by
following the steps on page 89 for title protection and page 41 for disc
protection.
Dubbing cannot be executed.
• When the number of the titles or the chapters exceeds the maximum
recordable number, the dubbing will not be executed.
Titles cannot be edited or deleted. • The titles in the DVD-R cannot be edited or deleted if they are finalized.
If it is video mode DVD-RW, undo the finalization by following the steps
on page 43.
The capacity of the disc doesn’t
increase even if the recorded
program is deleted.
• With video mode DVD-RW, the disc space will increase only when the
last title is deleted. With DVD-R, deleting a title will not increase the disc
space.
Dubbing cannot be executed.
Check if the disc is compatible for recording (refer to pages 10-11).
The remote control does not function. • No batteries in the remote or the batteries may be weak. Replace the
batteries.
• Make sure there is no obstacle between the remote and the unit.
• Try getting closer to the unit. (Refer to page 14.)
• If above solutions do not solve the problem, please call an Authorized
Service Center.
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only HDD/DVD.
– Can I play back DVD-video that is bought in another
country?
Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
No, you cannot control the unit by PC.
– Can I program a timer recording with cable/satellite
box?
Yes, you can. Select “L1” or “L2” as your recording
channel, and leave the cable / satellite box on (pages 19,
53-54).
– Can I record one channel while watching another
channel using a cable / satellite box?
It depends on your connection configurations. For
more details, please kindly contact your cable / satellite
provider.
– Can I connect this unit directly to a TV which only has
an antenna in jack using an RF coaxial cable?
No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 18). This unit does not have an RF modulator.
– Can I change the channels on the cable / satellite box
using the remote control of this unit?
No. Changing the channels on the cable / satellite box
using this unit’s remote control is not possible. You
need to use the remote control supplied with the cable /
satellite box to change the channels on the cable / satellite
box.
108 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Error message
Cause
Solution
Disc Error
• Unplayable disc is inserted in the unit.
• The disc is upside down.
• Insert the standardized disc which have
the marks on pages 10-11.
— Please eject the disc. —
Playback feature may not be available on this disc.
•
Insert the disc with the labeled side facing up.
Region Error
— Please eject the disc. —
Playback is not authorized in your region.
• Playback is not authorized in the region
of the DVD-video which you inserted in
the unit.
• Insert the DVD-video with region codes
1 or ALL.
Parental Lock On
The current selected parental level
prohibits playback.
• The current selected parental level
prohibits playback.
• Check “Parental Lock” setting in
“Playback” menu (page 96).
Recording Error
This program is not allowed to be recorded.
• You are trying to record the copy
prohibited program.
• You cannot record copy prohibited
programs.
Recording Error
This program is not recordable in Video
mode.
• You are trying to record the copy-once
program onto the DVD-RW in Video
mode.
• Set “Format Mode” to “VR mode”
(pages 39-40).
Recording Error
Can not record on this disc.
• You are trying to record onto the disc
which is unrecordable, or the disc status
is unable to record.
• Insert the recordable disc, and ensure
the disc status satisfies the recording
requirements (pages 10-11).
• Clean the disc with a cleaning cloth.
• Replace the disc.
• The disc is dirty.
• The disc is damaged.
Recording Error
This program is not allowed to be
recorded on this disc.
• You are trying to record the copy-once
program onto the DVD-RW disc which
is not compatible with CPRM.
• Insert the DVD-RW disc in VR mode
(ver.1.1 or 1.2 compatible with CPRM).
Recording Error
This disc is protected and not recordable.
•
You are trying to record onto the protected
disc which is set in “DVD Menu” menu.
• Release the disc protect setting in “DVD
Menu” menu (page 41).
Recording Error
• You are trying to record onto the disc
which has no space for recording.
• Insert the recordable disc with enough
recording space.
Disc is full.
(No area for new recording)
Recording Error
•
•
•
You are trying to record onto the DVD-
RW/-R on which the number of recording
titles comes up to the maximum (99).
• Delete unnecessary titles (pages 77-79).
You cannot record more than 99 titles on one disc.
(The maximum is 99)
Recording Error
You cannot record more than 999 chapters on one disc.
(The maximum is 999)
You are trying to record onto the VR mode
DVD-RW on which the number of recording
chapters comes up to the maximum (999).
• Delete unnecessary chapter marks
(page 84).
Recording Error
You cannot record on this disc as Control
Information is full.
This disc has no space to write the Control
• Delete unnecessary titles
(pages 77-79).
Information when recording or deleting contents.
When editing has been repeatedly performed,
the control Information area may come up to be
full even the recording area has enough space.
Recording Error
You cannot record on this disc as Power
Calibration Area is full.
•
•
When recordings are performed
• Insert a new disc.
repeatedly onto an unstable disc, this
area may come up to be full.
Every time you insert a disc for recording,
the disc’s working area will be taken up.
And if you repeat this frequently, it will
be used up sooner and you may not be
able to record full 99 titles.
Recording Error
This disc is already finalized.
• You are trying to record onto the disc
already finalized.
• Undo the finalizing for this disc
(page 43).
Recording Error
You cannot record more than 600 titles
on HDD. (The maximum is 600).
• You are trying to record onto the HDD
when total title number is already at its
limit.
• Delete unnecessary titles (pages 77-79).
Recording Error
• The internal HDD is dirty or damaged.
• Contact the customer service center.
• Delete unnecessary titles (pages 77-79).
Cannot record on this HDD.
Recording Error
HDD is full.
(No area for new recording)
• There is not enough space on the
internal HDD.
* If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the
error description for calling our help line to locate an Authorized Service Center.
EN 109
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE
Language
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Code
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
5261
5256
5255
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
Language
Hungarian
Icelandic
Indonesian
Interlingua
Interlingue
Inupiak
Code
5467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
5861
5847
5868
5860
5866
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
Language
Russian
Samoan
Sangho
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
Setswana
Shona
Code
6467
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
6565
6557
6558
6561
5165
6567
6569
6568
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Korean
Kurdish
Laothian
Latin
Latvian; Lettish
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Occitan
Oriya
Oromo (Afan)
Panjabi
Pashto; Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Romanian
Sindhi
Singhalese
Siswat
Slovak
Slovenian
Somali
Spanish
Sundanese
Swahili
Swedish
Tagalog
Tajik
Basque
Bengali;Bangla
Bhutani
Bihari
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Frisian
Uzbek
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Hebrew
Hindi
110 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
GLOSSARY
Analog Audio
PCM (pulse code modulation)
An electrical signal that directly represents sound.
The most common system of encoding digital audio,
Compare this to digital audio which can be an electrical
found on CD and DAT. Excellent quality, but requires a
signal, but is an indirect representation of sound. See also lot of data compared to formats such as Dolby Digital
“Digital Audio”.
and MPEG audio. For compatibility with digital audio
recorders (CD, MD and DAT) and AV amplifiers with
digital inputs, this unit can convert Dolby Digital and
MPEG audio to PCM. See also “Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen
is almost square); widescreen models are 16:9 (the TV
screen is almost twice as wide as it is high).
Progressive Scan (480p)
A type of display that does not split each frame into
fields, and instead scans directly through all the scanlines
of each frame in order. Progressive scan provides less
flickering and higher image resolution than traditional
(480i) TV signals. Refer to page 102 for instructions on
selective progressive scan mode.
Chapter (HDD/DVD)
Just as a book is split up into several chapters, a title on a
HDD/DVD is usually divided into chapters. See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/
CR) is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (480p),
you can experience higher-density picture than that in
interlace (480i).
Region Code
Regions associate discs and players with particular areas
of the world. This unit will only play back discs that have
compatible region codes. You can find the region code
of your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Digital Audio
Sampling Frequency
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-
to-digital converter, generating a stream of numbers.
On playback, a digital-to-analog converter generates
an analog signal based on these numbers. See also
“Sampling Frequency” and “Analog Audio”.
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling
in one second defines as sampling frequency. The higher
the rate, the better the sound quality.
SAP (secondary audio program)
Sub-audio channel which is delivered separately from
main-audio channel. This audio channel is used as an
alternate in bilingual broadcasting.
Dolby® Digital
The system to compress digital sound developed by
Dolby Laboratories. It offers you sound of stereo(2ch) or
multi channel audio.
S-Video Output
It delivers independently each signal of color(C) and
luminance(Y) to TV as video signals, so that higher-quality
picture will be gained.
Finalize
To make DVD, which have been recorded on, possible to
play back in DVD players.
Title (HDD/DVD)
A collection of chapters on HDD/DVD. See also “Chapter”.
HDMI™ (high definition multimedia interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with Audio CD use tracks to divide up the content of a disc.
one cable connection.
Track
The DVD equivalent is called a chapter. See also “Chapter”.
JPEG (joint photographic experts group)
Video mode
JPEG is a method of compressing still image files. You can Video mode is the same recording format as used on
copy JPEG files on CD-RW/-R from a computer and play
back the files on this unit.
the DVD videos you purchase in local shops. You can
play back the discs recorded in this format in most DVD
players, however it offers only limited editing. You will
need to finalize discs recorded in video mode before
playing them back on other unit.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R from the computer and play back the
files on this unit.
VR mode
A basic recording format for DVD-RW. VR mode offers
advanced editing, however it is playable only on VR
mode compatible unit. Finalization is recommended
before playing them back on other unit.
EN 111
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
• This model complies with the below specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added in the future.
General
System
HDD, DVD-RW/-R, DVD-video, CD-DA, CD-RW/-R
AC120 V, 60 Hz
33 W (standby: 5.7 W)
Power requirements
Power consumption
Weight
7.5 lbs ( 3.4 kg )
Dimensions (width x height x depth)
Operating temperature
Operating humidity
TV format
16.6” x 2.4” x 11.5” (420 x 59 x 290 mm)
41 °F to 104 °F (5 °C to 40 °C)
Less than 80% (no condensation)
ATSC / NTSC-M TV standard
Recording
Recording format
VR (video recording) format
Video format
Recording discs
DVD-Rewritable/-Recordable
Video recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
13.5 MHz
MPEG
48 kHz
Dolby Digital
Tuner
Tuning system
Channel frequency synthesized tuning system
Channel coverage (ATSC / NTSC)
Terrestrial
CATV
VHF 2~13, UHF 14~69
2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A-1, 5A
Input / Output
VHF/UHF antenna input/output terminal
VHF/UHF set 75Ω
Video input
Input level
Jacks
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
RCA jack
Video output
Output level
Jack
S-video input
Y (luminance) - Input level
C (color) - Input level
Jacks
Output 1 (rear)
1 Vp-p (75Ω)
RCA jack
Input 1 (rear), 2 (front)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
S-video output
Y (luminance) - Output level
C (color) - Output level
Jack
Component video output
Output level
Jacks
Output 1 (rear)
1 Vp-p (75Ω)
286 mVp-p (75Ω)
4 pin mini DIN
Output 1 (rear)
Y: 1.0 Vp-p (75Ω), PB/CB, PR/CR: 0.7 Vp-p (75Ω)
RCA jacks
HDMI output
Jack
HDMI jack
Audio input
During audio input
Jacks
Audio output
During audio output
Jacks
Input 1 (rear), 2 (front) L/R
2 V rms (input impedance: more than 22 kΩ)
RCA jacks
Output 1 L/R (rear)
2 V rms (output impedance: less than 1 kΩ)
RCA jacks
Digital audio output
Output level
Jack
DV input
Jack
Output 1 (rear) COAXIAL
500 mVp-p (75Ω)
RCA jack
IEEE 1394
DV input jack (4 pin)
112 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Discos grabables y reproducibles
Tipo de disco
Logotipo
DVD-RW
DVD-R
HDD
Formateado
automáticamente en
modo de video
Puede formatearse en modo VR o modo de
video
_
Formato
Modo de video
Modo VR
Icono
Tiempo máximo de
grabación
480 min (12cm)
144 min (8cm)
480 min (12cm)
144 min (8cm)
480 min (12cm)
144 min (8cm)
240 hrs
(con el modo SLP)
Versione 2.0
Versione 1.1,1.2
Versione 1.1/2× CPRM compatible
Versione 1.2/4× CPRM compatible
Versiones grabables/
reproducibles
Versione 2.0/4×
Versione 2.0/8×
Versione 2.0/16×
_
Se puede reproducir
Se puede reproducir Se puede reproducir
en la mayoría de los
reproductores de
DVD. Es necesario
finalizar. (se creará el
menú de títulos)
sólo en unidades
compatibles con
el modo VR. Se
en la mayoría de los
_
Compatibilidad
reproductores de DVD.
Es necesario finalizar. (se
recomienda finalizar. creará el menú de títulos)
Discos reproducibles
Tipo de disco
Logotipo
DVD-VIDEO
CD-DA
CD-RW
CD-R
Icono
Archivos reproducibles
MP3
Título de disco
Icono
JPEG
Medio
CD-RW/-R
CD-RW/-R
es una marca registrada de DVD Format/Logo Licensing Corporation.
Discos no Reproducibles
Códigos de Región
En este aparato no se podrán reproducir los siguientes discos.
Este equipo ha sido diseñado para reproducir
discos DVD rotulados para la región 1. Para poder
ser reproducidos en el equipo los DVD deben
estar rotulados para ALL las regiones o para la
región 1. No se pueden reproducir DVD que
estén rotulados para otras regiones. Busque los
símbolos a la derecha de su DVD. Si en su DVD no
aparecen estos símbolos regionales, el mismo no
se podrá reproducir en este aparato.
• CD-ROM
• Disco compacto interactivo (CD-I)
• Disco simple de video (VSD)
• DVD-ROM
• Audio en DVD
• Disco sin finalizar
• El DVD contiene archivos MP3, WMA o JPEG
• DVD-RW/-R grabado en formato de grabación no compatible
• Discos Blu-ray
• HD DVD
El número presente en el interior el globo se refiere a una
región del mundo.
• CD de super video
En el siguiente disco, es posible que no se escuche el sonido.
• Super audio CD - Sólo se podrá escuchar el sonido de la
capa del CD. No se podrá escuchar el sonido de la capa de
alta densidad de un super audio CD.
Un DVD rotulado para una región específica puede
reproducirse únicamente en equipos con el mismo código
de región.
Los siguientes discos se recomiendan para obtener una
buena calidad de grabación y han sido comprobados como
compatibles con este aparato. Sin embargo, según sea la
condición del medio el equipo podría no leer el disco
correctamente.
Sistemas de Color
Los discos DVD son grabados en el mundo en distintos
sistemas de color. El sistema de color más común es el NTSC
(que es utilizado principalmente en los Estados Unidos y
Canadá).
Este equipo utiliza NTSC, de modo que los discos DVD que
reproduzca deben estar grabados en el sistema NTSC. Usted
no puede reproducir discos DVD grabados en otros sistemas
de color.
Verbatim
JVC
Maxell
DVD-R 8x, DVD-RW 2x
DVD-RW 4x
DVD-R 8x/16x
El comportamiento de cualquier otro disco no está
garantizado.
Los reproductores de DVD con
DVD-RW grabados en modo VR.
pueden reproducir
ES 113
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Conexión Básica
1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA.
2) Efectúe la conexión como se ilustra abajo.
imagen normal
imagen buena
imagen mejor
COMPONENT
VIDEO IN
antena de
VHF / UHF
S-VIDEO IN
VIDEO
IN
TV
Y
(Verde)
PB/CB
(Azul)
o
PR/CR
(Rojo)
cable RCA de audio
empresa de
TV por cable
cable coaxial RF
cable de
vídeo en
componentes
cable RCA
de vídeo
cable
S-video
parte trasera del televisor
y
o
o
ANT. IN
L
R
AUDIO IN
parte trasera de la unidad
(Verde)
Y
VIDEO VIDEO
VIDEO
OUT
Y
IN
OUT
(Azul)
(Rojo)
L
L
L
OUT
S-VIDEO
R
R
IN
cable coaxial RF
R
AUDIO IN
ANTENNA
S-VIDEO AUDIO OUT
S-
(
)
L1
AUDIO OUT
COMPONENT
VIDEO OUTPUT
esta unidad
VIDEO OUT
S-VIDEO OUT
Cables suministrados:
• cable coaxial RF x 1
• cable RCA de audio (L/R) x 1
• cable RCA de vídeo x 1
Por favor, compre el resto de los cables necesarios en su tienda local.
3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA.
Conexión a un Televisor con un Puerto Compatible con HDMI™
Conectar esta unidad a un dispositivo con un toma HDMI
(Interface de Multimedios de Alta Definición) que utilice
un solo cable hace posible la transferencia digital tanto
de señales de imagen digital como de señales de sonido
con múltiples canales.
Modo HDMI y señales efectivas de salida
Presione [HDMI] para seleccionar el modo de salida
HDMI. Cada vez que se presiona [HDMI] el modo de
salida varía como sigue.
Pantalla del
panel frontal
Señal de salida
de video
HDMI IN
TV
Progresivo de 480
Progresivo de 720
1080 entrelazado
Progresivo de 1080
Presione [HDMI]
Presione [HDMI]
Presione [HDMI]
Presione [HDMI]
cable HDMI
esta unidad
HDMI OUT
Cuando se conecta con un cable HDMI la señal de audio
será hecha salir simultáneamente como señal audio
digital, de modo que usted no necesitará la conexión de
audio analógico descripta en la página 20.
• El modo HDMI que no esté admitido por el
dispositivo de exhibición será pasado por alto.
Cables no incluidos.
Adquiera los cables necesarios en una tienda de su
zona.
114 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Configuración Inicial
Grabación Básica
Si usted está reproduciendo los títulos de una unidad de disco
rígido, presione primero [HDD] y luego continúe al paso 2.
Si usted está reproduciendo los títulos de un DVD,
presione primero [DVD].
Cuando usted encienda este aparato por primera vez
necesita seguir estos pasos.
Presione [POWER].
Encienda el televisor. Seleccione la entrada a
Presione [OPEN/CLOSE A]
para abrir la bandeja de
la cual está conectado el aparato.
1
2
discos e insertar su disco
1
con el rótulo aupntando
hacia arriba. Presione de
nuevo [OPEN/CLOSE A]
para cerrar la bandeja de discos.
* Asegúrese de que el disco sea compatible con
este aparato. (Para obtener la lista de discos
compatibles consulte la página 31.)
Utilice [K / L] para seleccionar su
idioma deseado, y luego presione
[ENTER] para establecerlo.
Initial Setting
OSD Language
English
Français
Español
Para seleccionar un modo de
grabación presione [REC MODE].
Calidad del video
Modo de
2
3
4
Tiempo de grabación
y el sonido
grabación
Disco de 8 cm Disco de 12 cm HDD (interno)
18 min
36 min
72 min
108 min
144 min
60 min
120 min
240 min
360 min
480 min
30 hrs
60 hrs
120 hrs
180 hrs
240 hrs
XP
SP
LP
EP
SLP
Buena
Utilice [K / L] para seleccionar el tipo
de presintonía del canal deseado, y a
continuación, presione [ENTER].
Ajuste inicial
Deficiente
3
Presione [DTV/TV] para seleccionar TV
analógica o TV digital, y a
continuación, utilice [CH
/
] o [los
Ajuste de Canal
botones numéricos] y [-] (para canales
de TV digital) para seleccionar un
canal que desea grabar.
Consulte “Switching Analog Mode/Digital Mode”
y “Channel Selection” en la página 33.
Verificar que la antena esté
conectada a la toma "ANTENNA IN".
Aire
Cable
La unidad comenzará a recibir los canales
disponibles en su zona.
Presione [REC/OTR] para iniciar la
grabación.
Presione [ENTER] para activar
“Ajste Manual de Reloj”.
Para configurar la grabación a un toque
con temporizador (OTR)...
4
5
Esta es una manera sencilla de configurar el tiempo de
grabación en bloques de 30 minutos.
Utilice [{ / B] para seleccionar un
elemento a configurar, y utilice
[K / L] para seleccionar el contenido
de su preferencia, y luego presione
[ENTER].
Presione [REC/OTR] repetidamente hasta que aparezca
en la pantalla del televisor la longitud deseada de
grabación (30 minutos a 8 horas).
Comenzará la grabación a un toque con temporizador.
I
0:30
Ajuste inicial
0:30
1:00
(grabación normal)
8:00
Ajste Manual de Reloj
7:30
ENE / 01 / 2008 ( MAR )
12 : 00 AM
Para cambiar la duración de la grabación durante la
grabación a un toque con temporizador:
Presione
[REC/OTR] repetidamente hasta que aparezca
la duración deseada.
Para cancelar la grabación a un toque con
temporizador dentro del tiempo especificado:
Presione [STOP C].
Para de tener la grabación presione
[STOP C].
5
ES 115
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Copiado Básica
Preparación para el copiado (unidad de disco rígido a DVD):
• Inserte un DVD grabable.
Preparación para el copiado (DVD a unidad de disco rígido):
• Inserte un disco a ser copiado.
Presione [SETUP] en el modo de
detención.
Utilice [s / B] para seleccionar un
modo de grabación deseado, y luego
presione [ENTER].
1
2
3
8
HDD
DVD
Utilice [K / L] para seleccionar
“Doblaje”, y luego presione [ENTER].
Seleccione REC MODE.
SP LP EP
Alto
XP
SLP
Auto
Doblando títulos
500 MB
3000 MB
Unidad de disco rígido a DVD
Utilice [K / L] para seleccionar
“HDD DVD”, y luego presione
[ENTER].
Utilice [K / L] para seleccionar “Sí”, y
luego presione [ENTER].
El copiado comenzará.
Para detener el copiado en curso:
Presione [C STOP] en el panel frontal.
Presione [STOP C] en el control remoto durante
DVD a Unidad de disco rígido
Utilice [K / L] para seleccionar
“DVD HDD”, y luego presione
[ENTER].
9
2 segundos.
Utilice [K / L] para seleccionar
“Añadir”, y luego presione [ENTER].
Copiado a un toque......
4
Con el copiado a un toque, usted puede comenzar a
copiar de inmediato con sólo un toque.
Para copiar el contenido de un DVD que está finalizado
en otro equipo, utilice esta función.
Durante la reproducción del título que desea
copiar, presione [DUBBING].
HDD
DVD
3000 MB
Lista doblaje
Añadir
Borrar todo
Inic de doblaje
Si usted está reproduciendo un DVD, el copiado del DVD
a la unidad de disco rígido comenzará de inmediato.
1/1
Si usted está reproduciendo una unidad de disco rígido,
el copiado de la unidad de disco rígido al DVD
comenzará de inmediato.
• El copiado comenzará desde el comienzo del título que
está siendo reproducido.
Utilice [K / L / s / B] para
seleccionar un título deseado, y
luego presione [ENTER].
El título estará ahora registrado en la lista de
títulos copiados.
5
6
7
• El aparato sólo copiará el título que está siendo
reproducido.
• Cuando se copia de una unidad de disco rígido a un
DVD o desde un DVD-RW modo VR a un disco rígido, el
modo de grabación será configurado automáticamente
a “Alto” cada vez que se satisfagan las condiciones.
(Consulte la página 58.)
• Si no está disponible la copia en alta velocidad, el
título se copiará a la velocidad normal con el modo de
grabación del título.
Para detener el copiado en curso:
Presione [C STOP] en el panel frontal.
Presione [STOP C] en el control remoto durante 2
segundos.
Repita los pasos 4 y 5 hasta que
registre todos los títulos a ser
copiados.
Luego de añadir todos los títulos que
desea, utilice [K / L] para seleccionar
“Inic de doblaje” en el menú de
copiado, y luego presione [ENTER].
116 ES
Download from Www.Somanuals.com. All Manuals Search And Download.
ESPAÑOL
Reproducción Directa
Si usted está reproduciendo los títulos de una unidad de
disco rígido, presione primero [HDD] y luego continúe al
paso 2.
Si usted está reproduciendo los títulos de un DVD,
presione primero [DVD].
Presione [OPEN/CLOSE A]
para abrir la bandeja de
discos e insertar su disco
1
con el rótulo aupntando
hacia arriba. Presione de
nuevo [OPEN/CLOSE A]
para cerrar la bandeja de discos.
* Asegúrese de que el disco sea compatible con
este aparato. (Para obtener la lista de discos
compatibles consulte las páginas 10-11.)
Para iniciar una reproducción
presione [PLAY B].
2
Para detener momentáneamente la
reproducción presione [STOP C] una
3
vez.
• Consulte “Resume Playback” en la página 67.
ES 117
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date
of original retail purchase. Certain parts are excluded from this warranty.
LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of
original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE
UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any
product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling,
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or
office use of this product, or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI
CORP. will not reimburse you for any service done by unauthorized service providers without prior written
approval.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please
contact us at:
FUNAI CORPORATION
Customer Service
Tel: 1-800-968-3429
http://www.sylvania-ce.com
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
E2M20UD
1VMN24833 ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sharp Projector XG C435X L User Manual
Silex technology Network Card SX 510 User Manual
Sony Cassette Player 30TW User Manual
Sony Cell Phone D6502 User Manual
Sony Ericsson Cell Phone Accessories MCA 25 User Manual
Sony MP3 Player ZS H10CP User Manual
Sony Security Camera SNTRS1U User Manual
Sunbeam Iron 122015 User Manual
Sylvania DVD VCR Combo DVC800C User Manual
T Mobile Cell Phone t mobile dash User Manual