Sylvania DVD Recorder DVR90VE User Manual
Owner’s Manual  
DVD Recorder with Video Cassette Recorder  
DVR90VE  
OPEN/CLOSE  
POWER  
REW  
F.FWD STOP/EJECT PLAY  
DUBBING  
STOP  
PLAY  
OUTPUT SELECT  
S-VIDEO  
VIDEO  
L - AUDIO - R  
VCR  
DVD  
CHANNEL  
VCR  
DVD  
RECORD  
RECORD  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
Supplied Accessory  
• Remote control  
(NB108UD)  
with two AA batteries  
• RF cable  
WPZ0901TM002)  
• Audio/Video cables  
(WPZ0102TM015 or  
WPZ0102LTE01)  
• Owner’s Manual  
(0VMN04183)  
• Quick Use Guide  
(1VMN20003)  
(
Owner's Manual  
If you need additional operating assistance after reading this owner’s manual or to  
order replacement accessories, please call  
TOLL FREE : 1-800-968-3429  
or visit our web site at http://www.funai-corp.com  
Before you use this unit , you need to complete connections. Refer to  
“Connections” on pages 13-15.  
To record a program easily, refer to “Easy DVD recording” on pages 16-17  
after connections are completed.  
(You CANNOT record on any copyright protected DVD disc with this unit.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Precautions (cont’d)  
Important Safeguards  
1. Read Instructions - All the safety and operating instructions  
should be read before the appliance is operated.  
porting structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors, location of anten-  
na-discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. (Fig.A)  
2. Retain Instructions-The safety and operating instructions should  
be retained for future reference.  
3. HeedWarnings -All warnings on the appliance and in the oper-  
ating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions should  
be followed.  
FIGURE A  
ANTENNA  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
LEAD  
WIRE  
5. Cleaning - Unplug this product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
EXCEPTION:A product that is meant for uninterrupted ser-  
vice and, that for some specific reason, such as the possibility  
of the loss of an authorization code for a CATV converter, is  
not intended to be unplugged by the user for cleaning or any  
other purpose, may exclude the reference to unplugging the  
appliance in the cleaning description otherwise required in  
item 5.  
6.Attachments - Do not use attachments not recommended by  
the product manufacturer as they may cause hazards.  
7.Water and Moisture- Do not use this product near water, for  
example, near a bath tub, wash bowl, kitchen sink, or laundry  
tub, in a wet basement, or near a swimming pool, and the like.  
8.Accessories - Do not place this product on an unstable cart,  
stand,tripod,bracket,or table.The product may fall,causing seri-  
ous injury to a child or adult, and serious damage to the appli-  
ance. Use only with a cart, stand, tripod, bracket, or table rec-  
ommended by the manufacturer, or sold  
with the product. Any mounting of the  
appliance should follow the manufacturer's  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
14. Lightning - For added protection for this product during a light-  
ning storm, or when it is left unattended and unused for long  
periods of time, unplug it from the wall outlet and disconnect  
the antenna or cable system. This will prevent damage to the  
product due to lightning and power-line surges.  
15. Power Lines -An outside antenna system should not be located  
in the vicinity of overhead power lines or other electric light or  
power circuits, or where it can fall into such power lines or cir-  
cuits.When installing an outside antenna system, extreme care  
should be taken to keep from touching such power lines or cir-  
cuits as contact with them might be fatal.  
16. Overloading - Do not overload wall outlets and extension cords  
as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind into  
this product through any openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
18. Servicing - Do not attempt to service this product yourself as  
opening or removing covers may expose you to dangerous volt-  
age or other hazards. Refer all servicing to qualified service per-  
sonnel.  
19. Damage Requiring Service - Unplug this product from the wall  
outlet and refer servicing to qualified service personnel under  
the following conditions:  
a.When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the oper-  
ating instructions. Adjust only those controls that are covered  
by the operating instructions as an improper adjustment of  
other controls may result in damage and will often require  
extensive work by a qualified technician to restore the product  
to its normal operation.  
instructions and should use a mounting  
accessory recommended by the manufac-  
turer. An appliance and cart combination  
should be moved with care. Quick stops,  
excessive force, and uneven surfaces may  
cause the appliance and cart combination to overturn.  
9.Ventilation - Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the product and  
to protect it from overheating, and these openings must not be  
blocked or covered.The openings should never be blocked by  
placing the product on a bed, sofa, rug, or other similar surface.  
This product should not be placed in a built-in installation such  
as a bookcase or rack unless proper ventilation is provided or  
the manufacturer's instructions have been adhered to.  
10. Power Sources -This product should be operated only from the  
type of power source indicated on the marking label. If you are  
not sure of the type of power supply to your home,consult your  
appliance dealer or local power company. For products intend-  
ed to operate from battery power,or other sources,refer to the  
operating instructions.  
11. Grounding or Polarization - This product is equipped with a  
polarized alternating-current line plug (a plug having one blade  
wider than the other).This plug will fit into the power outlet  
only one way.This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug  
should still fail to fit, contact your electrician to replace your  
obsolete outlet. Do not defeat the safety purpose of the polar-  
ized plug.  
12. Power Cord Protection - Power supply cords should be routed  
so that they are not likely to be walked on or pinched by items  
placed upon or against them,paying particular attention to cords  
at plugs, convenience receptacles, and the point where they exit  
from the appliance.  
e.If the product has been dropped or damaged in any way.  
f.When the product exhibits a distinct change in performance this  
indicates a need for service.  
20. Replacement Parts - When replacement parts are required, be  
sure the service technician has used replacement parts specified  
by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, elec-  
tric shock or other hazards.  
21. Safety Check - Upon completion of any service or repairs to this  
product, ask the service technician to perform safety checks to  
determine that the product is in proper operating condition.  
22. Heat -This product should be situated away from heat sources  
such as radiators, heat registers, stoves, or other products  
(including amplifiers) that produce heat.  
13. Outdoor Antenna Grounding - If an outside antenna or cable  
system is connected to the product, be sure the antenna or  
cable system is grounded so as to provide some protection  
against voltage surges and built-up static charges.Article 810 of  
the National Electrical Code,ANSI/NFPA No.70,provides infor-  
mation with regard to proper grounding of the mast and sup-  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Precautions (cont’d)  
Installation Location  
Symbol  
Description  
Available to DVDVideo discs  
DVD-V  
For safety and optimum performance of this unit:  
• Install the unit in a horizontal and stable position. Do not  
place anything directly on top of the unit. Do not place  
the unit directly on top of the TV.  
• Shield it from direct sunlight and keep it away from  
sources of intense heat. Avoid dusty or humid places.  
Avoid places with insufficient ventilation for proper heat  
dissipation. Do not block the ventilation holes on the  
sides of the unit. Avoid locations subject to strong vibra-  
tion or strong magnetic fields.  
Available to DVD-RW inVideo mode  
Available to DVD-RW inVR mode  
Available to DVD-R discs  
DVD-RW  
DVD-RW  
DVD-R  
CCDD  
Available to Audio CDs  
Available to CD-R/RW discs with  
MP3 files  
Available toVHS tapes  
Use only  
with this unit.  
MP3  
VCR  
cassettes marked  
Indicates that you need to select the DVD  
mode by pressing DVD button on the  
remote control before proceeding next step.  
DVD  
VCR  
First:  
(Press:)  
Avoid the Hazards of Electrical Shock and Fire  
Indicates that you need to select theVCR  
mode by pressingVCR button on the  
remote control before proceeding next step.  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it  
from AC wall outlet. Grasp it by the plug.  
• If by accident water is spilled on this unit, unplug the  
power cord immediately and take the unit to our  
Authorized Service Center for servicing.  
• Do not put your fingers or objects into the unit cassette  
holder.  
First:  
(Press:)  
Maintenance  
SERVICING  
• Please refer to relevant topics on the Troubleshooting  
Guide on pages 97-99 before returning the product.  
• If this unit becomes inoperative, do not try to correct the  
problem by yourself.There are no user-serviceable parts  
inside.Turn off, unplug the power plug, and please call our  
help line mentioned on the front page to locate an  
Authorized Service Center.  
Moisture Condensation Warning  
Moisture condensation may occur inside the unit when it is  
moved from a cold place to a warm place, or after heating  
a cold room or under conditions of high humidity. Do not  
use this unit at least for 2 hours until its inside gets dry.  
CLEANINGTHE CABINET  
•
Use a soft cloth slightly moistened with a mild detergent solution. Do  
not use a solution containing alcohol, spirits, ammonia or abrasive.  
About Copyright  
CLEANING DISCS  
Unauthorized copying, broadcasting, public performance  
and lending of discs are prohibited.  
• When a disc becomes dirty, clean it with a cleaning  
cloth.Wipe the disc from the center out. Do not wipe in  
a circular motion.  
This product incorporates copyright protection technolo-  
gy that is protected by method claims of certain U.S.  
patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use of  
this copyright protection technology must be authorized  
by Macrovision Corporation, and is intended for home and  
other limited viewing uses only unless otherwise autho-  
rized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
• Do not use solvents such as benzine, thinner, commer-  
cially available cleaners, detergent, abrasive cleaning  
agents or antistatic spray intended for analogue records.  
CLEANINGTHE DISC LENS  
•
If this unit still does not perform properly although you refer to  
the relevant sections and to “TROUBLESHOOTING GUIDE”  
in this Owner’s Manual, the laser optical pickup unit may be  
dirty. Consult your dealer or an Authorized Service Center for  
inspection and cleaning of the laser optical pickup unit.  
Notice for progressive scan outputs  
DISC HANDLING  
Consumers should note that not all high definition televi-  
sion sets are fully compatible with this product and may  
cause artifacts to be displayed in the picture. In case of  
525 progressive scan picture problems, it is recommended  
that the user switch the connection to the ‘standard defin-  
ition output. If there are questions regarding our TV set  
compatibility with this model 525p DVD recorder, please  
contact our customer service center.  
• Handle the discs so that fingerprints and dust do not  
adhere to the surfaces of the discs.  
•
Always store the disc in its protective case when it is not used.  
AUTO HEAD CLEANING  
• Automatically cleans video heads as you insert or  
remove a cassette, so you can see a clear picture.  
• Playback picture may become blurred or interrupted  
while the TV program reception is clear. Dirt accumulat-  
ed on the video heads after a long period of use, or the  
usage of rental or worn tapes can cause this problem. If  
a streaky or snowy picture appears during playback, the  
video heads in the unit may need to be cleaned.  
Symbol in this owner's manual  
Many functions of this unit are depending on the disc type  
or the recording mode.  
To specify for what disc type or recording mode each  
function is, we put the following symbols at the beginning  
of each item to operate.  
1. Please visit your local Audio/Video store and purchase a  
good qualityVHSVideo Head Cleaner.  
2. If aVideo Head Cleaner does not solve the problem,  
please call our help line mentioned on the front page to  
locate an Authorized Service Center.  
NOTES:  
• Remember to read the instructions along with the video  
head cleaner before use.  
• Clean video heads only when problems occur.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Table of contents  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .52  
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Repeat/Random/Program play . . . . . . . . . . . . . .54  
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Selecting the format of audio and video . . . . . .56  
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .56  
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .57  
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .58  
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .58  
Before you start . . . . . . . . . . . . . . . . . . .2  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Functional overview . . . . . . . . . . . . . . . . . . . . . . .7  
Installing batteries in the remote control . . . . . . . . . .9  
Using a remote control . . . . . . . . . . . . . . . . . . . . . . .9  
VCR/DVD recorder switching . . . . . . . . . . . . . . . . . . .9  
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . . .9  
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Connections . . . . . . . . . . . . . . . . . . . . .13  
Connection to aTV . . . . . . . . . . . . . . . . . . . . . . .13  
Connection to a cable box or satellite box . . . .14  
Editing . . . . . . . . . . . . . . . . . . . . . . . . .59  
Information on disc editing . . . . . . . . . . . . . . . . .59  
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Editing discs inVideo mode . . . . . . . . . . . . . . . . . . .59  
Connection to an Audio System . . . . . . . . . . . . .15  
Getting started . . . . . . . . . . . . . . . . . . .16  
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .16  
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Getting channels automatically . . . . . . . . . . . . . . . . .18  
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .19  
Selecting theTV stereo or SAP . . . . . . . . . . . . .20  
Editing discs inVR mode . . . . . . . . . . . . . . . . . . . . .60  
Editing DVD-RW discs inVideo mode . . . . . . . .61  
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .62  
Clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .21  
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .22  
Setting the daylight saving time . . . . . . . . . . . . . . . .24  
Selecting theTV aspect ratio . . . . . . . . . . . . . . .25  
Setting or clearing chapter markers . . . . . . . . . . . . .64  
Editing DVD-RW discs inVR mode (Original) . .65  
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .66  
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .67  
Setting or clearing chapter markers . . . . . . . . . . . . .69  
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .70  
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .72  
Recording . . . . . . . . . . . . . . . . . . . . . . .26  
Information on DVD recording . . . . . . . . . . . . . .26  
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Restrictions on recording . . . . . . . . . . . . . . . . . . . .26  
Information on copy control . . . . . . . . . . . . . . . . . .27  
Making discs playable in other DVD player (Finalize) 27  
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .28  
Settings for the recording format to a blank disc . . .28  
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30  
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Checking the recording picture quality . . . . . . . . . .32  
One-touch timer recording . . . . . . . . . . . . . . . .33  
Releasing titles from protecting . . . . . . . . . . . . . . . .73  
Editing DVD-RW discs inVR mode (Playlist) . . .74  
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74  
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .75  
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .76  
Setting or clearing chapter markers . . . . . . . . . . . . .78  
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .79  
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .81  
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .83  
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34  
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36  
Settings for an external source . . . . . . . . . . . . . .37  
Connection to an external source . . . . . . . . . . . . . .37  
Recording from an external source . . . . . . . . . . . . .38  
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .84  
Changing the SETUP menu . . . . . . . . .85  
Tour of the SETUP menu . . . . . . . . . . . . . . . . . .85  
Settings for Language . . . . . . . . . . . . . . . . . . . . .86  
Settings for Display . . . . . . . . . . . . . . . . . . . . . . .88  
Settings for Audio . . . . . . . . . . . . . . . . . . . . . . . .90  
Settings for Parental lock level . . . . . . . . . . . . . .92  
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .41  
Setting a disc to protect . . . . . . . . . . . . . . . . . . .42  
Playing discs . . . . . . . . . . . . . . . . . . . . .43  
Information on DVD play . . . . . . . . . . . . . . . . . .43  
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Playing discs using the disc menu . . . . . . . . . . . . . . .46  
Playing discs using the title menu . . . . . . . . . . . . . . .47  
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .48  
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .48  
Skipping TV commercials during playback . . . . . . . . .49  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .50  
Slow forward / Slow reverse play . . . . . . . . . . . . . . .50  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
VCR functions . . . . . . . . . . . . . . . . . . .94  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94  
Recording and One-touch timer recording . . . .94  
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94  
One-touch timer recording . . . . . . . . . . . . . . . . . . . .95  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96  
Other operations . . . . . . . . . . . . . . . . . . . . . . . .96  
Others . . . . . . . . . . . . . . . . . . . . . . . . .97  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .97  
RF converter output . . . . . . . . . . . . . . . . . . . . .100  
Language code . . . . . . . . . . . . . . . . . . . . . . . . .101  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103  
Español . . . . . . . . . . . . . . . . . . . . . . . .104  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Features  
This unit not only plays DVD’s, CDs andVHS tapes but also offers features for you to record to DVD discs  
and edit them after that.The following features are offered with this unit.  
Recording  
Editing  
DVD mode VCR mode  
DVD mode  
This unit is compatible with both DVD-RW, which is rewritable  
repeatedly, and DVD-R, which is available for recording once.  
Also, this unit allows you to record to the video cassette tape.  
You can choose either one for your convenience.  
Setting/Clearing chapter markers:  
You can easily add chapter markers anywhere in your  
recordings for easy editing. (VR mode)  
Making your own Playlist:  
Up to 8 programs recording:  
With the original remains as it is, you can edit titles on  
Various playlist as you prefer.  
You can program the unit to record up to 8 programs, up  
to a year in advance. Daily or weekly program recordings  
are also available.  
Putting names on titles.  
Setting pictures for thumbnails.  
Setting/clearing chapter markers.  
Deleting parts of titles, etc.  
One-touch timer recording:  
You can easily set a recording time as you prefer. Every  
time the REC/OTR button on the remote control or the  
RECORD button on the front panel pressed during  
recording, the recording time will be increased by 30 min-  
utes up to 8 hours.The recording automatically stops  
when the recording time you set is reached.  
Protecting titles:  
To avoid editing or erasing titles, the protect function is  
useful when it is ON in the original list.  
Compatibility  
DVD mode  
Dubbing mode:  
You can copy a DVD disc to a videotape or copy a video-  
tape to a DVD disc.This function will be possible only if  
the DVD disc is not copy protected.  
Available for playing discs recorded inVideo mode  
on a regular DVD player (Video mode):  
Discs recorded in theVideo mode can be played on regular  
DVD players, including computer DVD drives compatible with  
DVD-Video playback*.You will need to finalize the discs  
recorded inVideo mode to play in other DVD players.  
* DVD-Video Format (Video mode) is a new format for record-  
ing on DVD-R/RW discs that was approved by the DVD Forum  
in 2000.Adoption of this format is optional for manufactures of  
DVD playback devices and there are DVD-Video players, DVD-  
ROM drives or other DVD playback devices that do not play  
DVD-R/RW discs recorded in the DVD-Video Format.  
DVD mode  
REC MONITOR:  
You can confirm the picture quality for recording in the  
current recording speed which you set.  
If you want to change the recording speed, press REC  
SPEED button to set the desired recording mode.  
Automatic Chapter marker setting:  
Chapter markers will be put on recordings as you set in  
SETUP menu before attempting to record.  
AutomaticTitle menu making:  
The unit makes title menus automatically when finalizing  
the disc which are recorded inVideo mode.  
Automatic PLAYLIST making (VR mode):  
A Playlist will be prepared from an Original list, so that  
you can edit titles in a Playlist as you prefer.  
An Original list is kept as it is.  
Others  
Progressive Scan system  
Unlike conventional interlace scanning, the progressive scan  
system provides less flickering and images in higher resolu-  
tion than that of traditional television signals.  
Play  
DVD mode  
Theater surround sound in your home:  
When connecting the unit to an amplifier or a decoder which is  
compatible with Dolby Digital, you are allowed to experience the  
theater surround sound from discs with surround sound system.  
Quick search for what you want to watch:  
You can easily find the part you want to watch using the search func-  
tion. Search for a desired point on a disc by title, chapter, or time.  
Start to play from Original and Playlist (VR mode):  
Title playing is available from either an Original list or Playlist.  
VCR mode  
Quick search for what you want to watch:  
You can easily find the part you want to watch using the Index  
search/Time search functions.An index mark will be assigned at  
the beginning of each recordings you make. For Time search func-  
tion, you can go to a specific point on a tape by entering the  
exact amount of time you wish to skip.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview  
1
2
3
4
5
Front Panel  
OPEN/CLOSE  
POWER  
REW  
F.FWD STOP/EJECT PLAY  
DUBBING  
STOP  
PLAY  
OUTPUT SELECT  
S-VIDEO  
VIDEO  
L
-
AUDIO  
-
R
VCR  
CHANNEL  
DVD  
VCR  
DVD  
RECORD  
RECORD  
22 20 18  
21 19  
16  
15 14 13 1211 109  
8
7
6
12. DVD SELECT indicator  
1. POWER button / indicator (DVD/VCR)  
This indicator appears when the DVD output mode is selected.  
13. VCR SELECT indicator  
Press to turn the unit on and off.  
If timer programmings have been set, press to set the  
unit in timer-standby mode. Press to cancel the timer  
standby mode, then turn the unit on.  
Lights up when power is on.  
This indicator appears when theVCR output mode is selected.  
14. DUBBING button (DVD/VCR)  
Press to startVCR to DVD (DVD toVCR) duplication  
which you set in the SETUP menu.  
15. CHANNEL L / K button (DVD/VCR)  
Press to change the channel up and down.  
16. Display (DVD/VCR)  
2. Cassette compartment (VCR)  
Insert a tape here.  
3. A OPEN/CLOSE button (DVD)  
Press to open or close the disc tray.  
Refer to “Guide to Displays on the front panel” on page 12.  
17. Remote control sensor (DVD/VCR)  
Receive signals from your remote control so that you  
can control the unit from a distance.  
4. OUTPUT SELECT  
{
B button (DVD/VCR)  
Press to select the component you wish to operate.  
5. Disc tray (DVD)  
Place a disc when open.  
18. RECORD button (VCR)  
6. AUDIO INPUT jacks (LINE2) (DVD/VCR)  
Use to connect external equipment with standard audio cables.  
7. VIDEO INPUT jack (LINE2) (DVD/VCR)  
Use to connect external equipment with a standard video cable.  
8. S-VIDEO INPUT jack (LINE2) (DVD only)  
Use to connect the S-Video output of external equip-  
ment with an S-Video cable.  
Press once to start a recording. Press repeatedly to  
start a One-Touch Recording.  
19. PLAY button (VCR)  
Press to start playback.  
20. STOP/EJECT button (VCR)  
EJECTbutton-Press to remove the tape from the unit.  
STOP button-Press to stop the tape motion.  
Press to stop the proceeding timer recording inVCR.  
21. F.FWD button (VCR)  
9. RECORD button (DVD)  
Press to start recording.  
Press repeatedly to start a One-Touch Recording.  
10. PLAY button (DVD)  
Press to rapidly advance the tape, or view the picture  
rapidly in forward during playback. (Forward Search)  
22. REW button (VCR)  
Press to start or resume play.  
11. STOP button (DVD)  
Press to rewind the tape, or to view the picture rapidly  
in reverse during the playback mode. (Rewind Search)  
Press to stop playback or recording.  
Press to stop the proceeding timer recording in DVD.  
1
2 3 4 5  
6
Rear Panel  
DVD  
AUDIO S-VIDEO  
DVD/VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO OUT OUT  
AUDIO IN AUDIO OUT ANTENNA  
IN  
Y
L
L
L
CB  
R
R
COAXIAL  
IN  
VIDEO IN VIDEO OUT  
OUT  
R
CR  
OUT  
•
These jacks are  
useful only in  
DVD mode.  
1211 10  
9 8  
7
1. AC Power Cord (DVD/VCR)  
8. VIDEO OUTPUT jack (DVD/VCR)  
Use to connect a TV monitor,AV receiver or other  
equipment with a standard video cable.  
9. VIDEO INPUT jack (LINE1) (DVD/VCR)  
Use to connect external equipment with a standard  
video cable.  
Connect to a standard AC outlet to supply power to this unit.  
2. S-VIDEO INPUT jack (LINE1) (DVD only)  
Use to connect the S-Video output of external equip-  
ment with an S-Video cable.  
3. COMPONENTVIDEO OUTPUT jacks (DVD only)  
Use to connect a TV monitor with component video  
inputs with component video cables.  
10. S-VIDEO OUTPUT jack (DVD only)  
Use to connect the S-Video input of a TV monitor,AV  
receiver or other equipment with an S-Video cable.  
11. AUDIO OUTPUT jacks (DVD only)  
Use to connect a TV monitor,AV receiver or other  
equipment with standard audio cables.  
4. AUDIO INPUT jacks (LINE1) (DVD/VCR)  
Use to connect external equipment with standard  
audio cables.  
5. AUDIO OUTPUT jacks (DVD/VCR)  
Use to connect a TV monitor,AV receiver or other  
equipment with standard audio cables.  
12. COAXIAL DIGITAL AUDIO OUTPUT jack  
(DVD only)  
6. TV ANTENNA IN jack (DVD/VCR)  
Use to connect an antenna.  
Use to connect an AV receiver, Dolby Digital decoder  
or other equipment with a coaxial digital input with a  
digital coaxial cable.  
7. TV ANTENNA OUT jack (DVD/VCR)  
Use to connect an antenna cable to pass the signal  
from the TV ANTENNA IN to your TV monitor.  
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma-  
nent damage to the unit.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
Remote Control  
7. SETUP button (DVD/VCR)  
Press to display the setup menu.  
During DVD playback, press and  
hold for more than 3 seconds  
to switch to the progressive  
scanning mode or the interlace  
mode.  
18. VIDEO/TV button (DVD/VCR)  
Press to selectVIDEO or TV  
position.  
14  
15  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
19. SLOW button (VCR)  
During playback, press to  
view the video tape in slow  
motion.  
.@/:  
1
16  
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
17  
2
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
18  
19  
SPACE  
0
8. REC MONITOR button (DVD)  
Press to check the video to be  
recorded before attempting.  
9. MENU/LIST button (DVD)  
20. PAUSE F button  
(DVD/VCR)  
DISPLAY  
VCR  
DVD  
PAUSE  
20  
22  
3
5
Press to pause play or  
recording.  
4
7
21  
23  
PLAY  
Press to display the Disc menu. 21. DVD button  
STOP  
24  
26  
Press to change ORIGINAL  
and PLAYLIST on the TV  
screen.  
Press to activate the remote  
REC/OTR  
SETUP  
TIMER PROG.  
25  
27  
28  
29  
6
8
control in DVD mode. (Refer  
to page 9)  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
(VR mode only)  
Press to select the DVD out-  
put mode.  
9
10  
12  
CLEAR/C-RESET ZOOM  
SEARCH  
10. TOP MENU button (DVD)  
Press to display the top menu.  
11. CLEAR/C-RESET button  
(DVD/VCR)  
11  
CM SKIP  
MODE  
22. PLAY B button  
(DVD/VCR)  
30  
13  
Press to start or resume play.  
23. D button (DVD/VCR)  
• DVD mode  
• DVD mode  
Press to clear the password once  
entered, to cancel the program-  
ming for CD, to clear the select-  
ing marker number in the marker  
setup mode or to clear the pro-  
gram once entered in the timer  
recording setting mode,etc.  
•VCR mode  
During playback, press to play  
fast forward.  
•VCR mode  
Press to rapidly advance the  
tape or view the picture  
rapidly in forward during play-  
back.  
1. POWER button (DVD/VCR)  
Press to turn the unit on and off.  
If timer programmings have  
been set, press to set the unit  
in timer-standby mode. Press  
to cancel the timer standby  
mode, then turn the unit on.  
2. Number buttons (DVD/VCR)  
Press to select channel numbers.  
Press to select a title/chap-  
ter/track on display or a TV  
channel.  
Press to reset the tape counter. 24. STOP C button  
12. SEARCH MODE button (VCR)  
Press to call up the index or  
time search menu.  
(DVD/VCR)  
Press to stop playback or  
recording.  
13. CM SKIP button (DVD)  
During playback, press to skip  
30 seconds.  
25. TIMER PROG. button  
(DVD/VCR)  
Press to display the timer  
program setting menu.  
26. ENTER button  
(DVD/VCR)  
14. REC SPEED button  
(DVD/VCR)  
Also press to enter values for  
the settings in the SETUP menu.  
3. DISPLAY button (DVD/VCR)  
Press to display or change the  
on-screen display.  
Press to switch the recording  
speed.  
Press to confirm or select  
menu items.  
15. OPEN/CLOSE A button (DVD)  
Press to open or close the  
disc tray.  
27. K / L / { / B buttons  
(DVD/VCR)  
4. VCR button  
Press to activate the remote  
control inVCR mode. (Refer  
to page 9)  
16. AUDIO button (VCR)  
During playback a HiFi video  
tape, press to change the  
AUDIO OUT setting “HiFi”  
and “MONO”.  
Press to select items or settings.  
28. RETURN  
button  
(DVD/VCR)  
Press to select theVCR out-  
put mode.  
Press to return to the previ-  
ously displayed menu screen.  
29. ZOOM button (DVD)  
During playback, press to  
enlarge the picture on the  
screen.  
5. E button (DVD/VCR)  
• DVD mode  
17. CH K / L buttons (DVD/VCR)  
• DVD mode  
During playback, press to play  
fast reverse or during pause,  
press to play slow reverse.  
•VCR mode  
Press to change the channel  
up and down.  
•VCR mode  
30. SKIP H button (DVD)  
During playback, press to skip to  
the previous chapter or track.  
Also during pause, press to play  
reverse step by step.  
Press to change the channel  
up and down.  
Press to rewind the tape or  
to view the picture rapidly in  
reverse during the playback  
mode.  
Press to adjust the tracking  
during playback or in slow  
motion of the tape. Also  
while playback is in still mode,  
you can adjust the picture  
blurred vertically.  
SKIP G button (DVD)  
During playback, press to skip to  
the next chapter or track.  
Also during pause, press to play  
forward step by step.  
6. REC/OTR button (DVD/VCR)  
Press once to start a record-  
ing. Press repeatedly to start  
a One-Touch Recording.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
Installing batteries in the remote control Using a remote control  
Install two AA batteries (supplied) matching the  
polarity indicated inside battery compartment of the  
remote control.  
Keep in mind the following when using the remote  
control:  
• Make sure that there is no obstacle between the  
remote control and the remote sensor on the  
unit.  
1
3
2
• Use within the operating range and angle as  
shown.  
• Remote operation may become unreliable if strong  
sunlight or fluorescent light is shining on the  
remote sensor of the unit.  
• Remote control for different devices can interfere  
with each other. Avoid using remote control for  
other equipment located close to the unit.  
• Replace the batteries when you notice a fall off in  
the operating range of the remote control.  
Note:  
Incorrect use of batteries can result in hazards such  
as leakage and bursting. Please observe the following:  
• Do not mix new and old batteries together.  
• Do not use different kinds of batteries together,  
although they may look similar, different batteries  
may have different voltages.  
• Make sure that the plus and minus ends of each  
battery match the indications in the battery com-  
partment.  
• Remove batteries from equipment that is not going  
to be used for a month or more.  
• When disposing of used batteries, please comply  
with governmental regulations or environmental  
public instruction rules that apply in your country  
or area.  
PO  
WE  
Within about  
23feet (7m)  
R
RE  
W
F.F  
WD  
S
T
O
P
/
E
J
E
C
T
PL  
AY  
VC  
R
OP  
EN  
/CL  
OS  
RE  
CO  
RD  
E
DU  
BB  
IN  
G
CH  
AN  
NE  
L
ST  
OP  
OU  
TP  
UT  
PL  
AY  
VC  
R
SE  
LE  
CT  
DV  
D
DV  
D
RE  
CO  
RD  
S-V  
IDE  
O
VID  
EO  
L
-
AU  
DIO  
-
R
60˚  
Remote  
control  
R
E
C
P
A
U
SE  
k
RE  
h
V
H
SK  
IP  
PL  
B
A
Y
T
OR  
O
P
IG EN  
G
M
ST  
OP  
IN  
U/  
C
AL  
FW  
g
D
K
EN  
P
LA EN  
U
IS  
M
TE  
R
Y
L
T
• Do not recharge, short-circuit, heat, burn or disas-  
semble batteries.  
VCR/DVD recorder Switching  
Because this product is a combination of aVCR and a DVD recorder, you must select first which com-  
ponent you wish to operate with the OUTPUT SELECT button.  
OUTPUT SELECT button  
VCR MODE  
OPEN/CLOSE  
Press theVCR button on the remote control.  
(Verify that theVCR SELECT indicator is lit.)  
POWER  
REW  
F.FWD STOP/EJECT PLAY  
DUBBING  
STOP  
PLAY  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
OUTPUT SELECT  
S-VIDEO  
VIDEO  
L
-
AUDIO  
-
R
VCR  
CHANNEL  
DVD  
VCR  
DVD  
RECORD  
RECORD  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DVD MODE  
VCR button  
DVD button  
DISPLAY  
VCR  
DVD  
PAUSE  
Press the DVD button on the remote control.  
(Verify that the DVD SELECT indicator is lit.)  
PLAY  
OUTPUT SELECT  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
VCR  
DVD  
DVD SELECT  
indicator  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
VCR SELECT  
indicator  
Note  
CM SKIP  
MODE  
• Pressing only the OUTPUT SELECT button  
on the front panel DOES NOT switch the mode  
of the remote control.You MUST select the cor-  
rect mode on the remote control.  
• Pressing the SETUP or theTIMER PROG.  
button switches the unit to the DVD mode.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
Guide to Displays on screen menu  
This unit uses the following types of display for most operations. SETUP/DISC/CD menu,Title list, and DIS-  
PLAY, which allows you to change the playing status of disc during play. DISPLAY also gives you some disc  
information for checking the status of the disc.  
SETUP/DISC/CD menu  
Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing K / L /  
{ / B buttons.Then, press ENTER button to display each menu.  
This provides entries to all main functions of the unit.  
“DISC” is available only when a DVD-R/RW disc is  
inserted into the unit. When playing back a DVD-  
Video disc (commercially available) or the finalized  
DVD-R disc, you cannot select “DISC”.  
“CD” is available only when an  
Audio CD disc or a CD-R/RW  
disc with MP3 files is inserted  
into the unit.  
“SETUP” is available only in the  
Stop mode.  
Setup Menu  
Setup  
Disc Setting  
CD Playback Mode  
CD Playback Mode  
Disc  
Edit  
Random Play  
Program Play  
Format  
Finalize  
1
2
5
3
6
Disc Protect OFF ON  
1 2 3 4  
1 2  
4
Playback Setting  
1. Playback:  
To set up the unit to play discs as  
you prefer.  
1. Edit:  
1. Random Play:  
To set the random play program-  
ming.  
Turns on a title list, (When a disc  
withVR mode is inserted,  
2. Recording:  
'Original' or 'PlayList' is available.), 2. Program Play(Audio CD  
To set up the unit to record to  
discs as you prefer.  
3. Display:  
which shows the recorded titles  
on the disc.  
2. Format:  
only):  
To set the program playing.  
To set up the OSD screen and the Allows you to erase all of the  
front display of the unit as you  
prefer.  
4. SelectVideo:  
recorded content on the disc.  
The disc will be completely blank.  
3. Finalize:  
To choose a line input to record  
to DVD discs from other video  
equipment.  
Allows you to finalize a disc  
recorded titles.  
4. Disc Protect (VR mode  
only) :  
5. Clock:  
To set up the clock of the unit as  
you need.  
Allows you to protect a disc from  
accidental editing or recording.  
6. Channel:  
To make the channel setting of  
the unit as you prefer.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
DISPLAY menu  
1. Indicates a disc type and a  
format mode.  
2. Indicates a recording mode  
and possible recording time.  
3. Indicates a current channel  
number.  
4. Indicates a title number, chap-  
ter number and the time  
elapsed of disc play.  
: Search  
DVD mode  
DVD  
: Audio  
First:  
: Subtitle  
Press DISPLAY button to call up  
the display menu.This menu will  
give you the information on the  
playing disc. Some operations are  
available while disc is playing.  
: Angle (exceptVR mode)  
: Repeat  
: Marker  
: Noise Reduction  
: Zoom  
5. Each icon means:  
Details are on page 41.  
4
1
DVD-RW  
1
1
00:00:00  
Video mode  
SP 1:25 Rem.  
CH 1  
2
3
5
VCR mode  
1. Playback status of the current  
tape.  
VCR  
First:  
2. Indicates a current channel  
number.  
3. Indicates a recording speed  
only five seconds.  
4. Indicates a Tape Counter.  
5. Audio status of the current  
tape.  
Press DISPLAY button to call up  
the display menu.  
1
2
CH21  
SP  
0:00:00  
HIFI  
3
4
5
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
Functional overview (cont’d)  
Guide to Displays on the front panel  
4
2
1
6
3
7
5
1. Current status of the unit  
: Appears when a disc play  
is paused.  
2. Disc type and Current  
3. Recording speed  
Indicates the recording speed of  
the disc.  
4. Title/Track and Chapter  
mark  
status of the unit  
:
Appears when an audio CD  
or a disc with MP3 files is  
inserted in the disc tray.  
Appears when a DVD disc  
is inserted in the disc tray.  
Appears when the timer  
recording is proceeding in  
DVD.  
: Appears when playing a  
disc.  
: Appears when the timer  
programming has been  
set and is proceeding.  
: Appears during recording  
process.  
:
: Appears when indicating  
a title/track number.  
: Appears when indicating  
a chapter number.  
:
Appears when DVD is in  
the timer recording stand-  
by mode.  
5. Displays the following  
• Playing time / remaining time  
• Current title / chapter / track  
number  
• Recording time  
• Clock  
• Channel number  
Appears during repeat  
play.  
:
:
Appears when a tape is in  
the unit.  
Appears when a DVD-R disc  
is inserted in the disc tray.  
:
Appears when a DVD-  
RW disc is inserted in  
the disc tray.  
Appears when the timer  
recording is proceeding in  
VCR.  
• VCR tape counter  
• OTR remaining time  
:
6.  
: Appears in the after-  
noon with the clock  
displaying.  
Appears whenVCR is in  
the timer recording stand-  
by mode.  
7.  
:
Appears when the pro-  
gressive scan system is  
activated.  
:
Appears duringVCR to DVD  
duplication process.  
:
Appears during DVD toVCR  
duplication process.  
1. Appears when the disc tray is  
Display message  
opening.  
1
3
4
2. Appears when the disc tray is  
closing or close.  
3. Appears when a disc is loading  
in the disc tray.  
2
4. Appears when recording data  
is writing on to the disc.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection to aTV  
(Back ofTV)  
Antenna  
Antenna  
Cable  
Signal  
Cable  
Signal  
(Back ofTV)  
3
or  
or  
Connect  
RF Cable  
(supplied)  
1
DVD  
AUDIO S-VIDEO  
DVD/VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO OUT OUT  
AUDIO IN AUDIO OUT ANTENNA  
Disconnect  
IN  
Y
L
L
L
CB  
R
R
COAXIAL  
IN  
VIDEO IN VIDEO OUT  
OUT  
2
R
CR  
OUT  
Connect  
(Back of this unit)  
4
Plug in the AC power cord of this unit.  
Make one of the following connections, depending on the capabilities of your existing equipment.  
Method 1  
Method 2  
Method 3  
Good picture  
Basic Audio  
Better picture  
Best picture  
TV  
COMPONENT  
VIDEO IN  
AUDIO IN  
VIDEO IN  
S-VIDEO IN  
Y
C
B
C
R
Video  
cable  
(supplied)  
S-Video  
cable  
(commercially  
Audio cable  
(supplied)  
Component  
Video cables  
(commercially  
available)  
available)  
This unit  
DVD  
COMPONENT  
DVD  
DVD/VCR  
DVD/VCR  
VIDEO OUT  
AUDIO OUT  
S-VIDEO  
Y
L
DVD  
S-VIDEO  
DVD/VCR  
COMPONENT  
VIDEO OUT  
AUDIO  
UT OUT  
AUDIO IN AUDIO OUT ANTENNA  
IN  
Y
L
L
C
B
R
R
L
C
B
R
R
R
L
IN  
VIDEO IN VIDEO OUT  
OUT  
R
C
VIDEO OUT  
OUT  
C
OUT  
or  
DVD  
COMPONENTVIDEO OUT  
VIDEO OUT  
S-VIDEO OUT  
AUDIO  
OUT  
DVD  
AUDIO S-VIDEO  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO OUT OUT  
Y
L
L
C
B
R
COAXIAL  
IN  
R
C
OUT  
R
•
These jacks are useful  
only in DVD mode.  
AUDIO OUT  
Note  
• Connect this unit directly to the TV. If the A/V cables are connected to aVCR, pictures may be distorted  
due to the copy protection system.  
• Method 2 and method 3 are only useful in DVD mode.  
STOP  
If yourTV is compatible with 525p (480p) progressive scanning and you want  
to enjoy that high quality picture;  
REC/OTR  
SETUP  
TIMER PROG.  
RETURN  
E
REC MONITOR  
You must select the connection Method 3 above and progressive scanning mode.To set  
the mode, press and hold the SETUP button on the remote control for more than 3 sec-  
onds during DVD playback, so that “P.SCAN” will appear on the display of this unit.  
If yourTV is not compatible with progressive scanning;  
Use this unit in interlace mode. Make sure that no “P.SCAN” is on the display of this unit.  
If not, press and hold the SETUP button on the remote control for more than 3 seconds  
during DVD playback, so that “P.SCAN” on the display of this unit will disappear.  
MENU/LIST TOP MENU  
more than 3 seconds  
during DVD playback  
[Interlace mode]  
[Progressive scanning mode]  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection to a cable box or satellite box  
(Back of this unit)  
Connection A  
(Cable box or  
Satellite box)  
DVD/VCR  
ANTENNA  
IN  
IN  
OUT  
OUT  
E
RF Cable  
Cable  
Signal  
(supplied)  
(Back of TV)  
Select this connection when you want to view or record a scrambled channel.With this connection, channels  
cannot be changed on this unit.You can view or record ONLY the channels you have selected on the cable  
box or the satellite box.  
• While you are recording, only the recorded channel can be viewed.  
To select channels of the cable box or satellite box  
1) Turn on this unit by pressing POWER button.The “POWER” indicator on the front panel will appear.  
Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of  
the cable box or satellite box).  
• If noise appears on the TV screen, pressVIDEO/TV button on the remote control.  
• If you use the channel 4, you will need to change this unit’s RF output to channel 4. Refer to “RF converter  
output” on page 100.  
2) At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).  
3) At the cable box or satellite box, select the channel you want to view or record.  
(Back of this unit)  
Connection B  
DVD/VCR  
ANTENNA  
IN  
(Cable box or  
Satellite box)  
OUT  
E
Cable  
Signal  
IN  
OUT  
(Back of TV)  
RF Cable (supplied)  
RF Cable  
Select this connection when you want to change channels on this unit.With this connection, you may watch  
one channel while recording another.  
•You may not view or record a scrambled channel.  
To select channels of the cable box or satellite box  
1) At the cable box or satellite box, select channel 3 or 4 (the same channel as this unit’s RF output chan-  
nel.)  
• Refer to “RF converter output” on page 100.  
2) At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.  
3) Turn on this unit by pressing POWER button. The “POWER” indicator on the front panel will appear.  
Then, select the channel you want to view or record.  
• If noise appears on the TV screen, pressVIDEO/TV button on the remote control.  
To playback a DVD disc or a tape  
Follow the steps 1) to 2) above, to playback a DVD disc or a tape.  
• Refer to “Playback” on pages 44-45, 94.  
To view one channel while recording another  
1) While you are recording on this unit, pressVIDEO/TV button.  
2) At the cable box or satellite box, select the channel you want to view.  
Note to the Cable TV System Installer :  
This reminder is provided to call the Cable TV system installer’s attention to Article 820-40 of the  
National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the  
cable ground shall be connected to the grounding system of the building, as close to the point of cable  
entry as possible.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connection to an Audio System  
• When you change the connections, all devices should be turned off.  
• Refer to each owner’s manual for further information on other devices.  
Method 1  
Method 2  
Stereo system  
Dolby Digital decoder,  
MD deck or DAT deck  
Analog audio  
input jacks  
AUDIO  
COAXIAL  
Digital audio  
input jack  
Audio Coaxial  
Digital cable  
(commercially  
available)  
Audio cable  
(supplied)  
This unit  
DVD  
DVD/VCR  
DIGITAL  
AUDIO OUT  
DIGITAL  
AUDIO OUT  
AUDIO OUT  
L
AUDIO OUT  
R
COAXIAL  
or  
DVD  
AUDIO  
OUT  
L
R
Note  
• If output is Dolby Digital encoded audio, connect  
to a Dolby Digital decoder, and set “Dolby Digital”  
to “Stream” for the “Digital Out” setting in the  
SETUP menu. (Refer to pages 90-91.)  
• The audio source on a disc in a Dolby Digital 5.1  
channel surround format cannot be recorded as  
digital sound by an MD or DAT deck.  
• Unless connected to a Dolby Digital decoder, set  
“Dolby Digital” to “PCM” for the “Digital Out” set-  
ting in the SETUP menu. Playing a DVD using incor-  
rect settings may generate noise distortion, and may  
also damage the speakers. (Refer to pages 90-91.)  
• Set “Dolby Digital” to “PCM” for the “Digital Out”  
setting in the SETUP menu for connecting to an  
MD deck or DAT deck. (Refer to pages 90-91.)  
• By hooking this unit up to a Multi-channel Dolby  
Digital decoder, you can enjoy high-quality Dolby  
Digital 5.1 channel surround sound as heard in the  
movie theaters.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Easy DVD recording  
The following will help you to understand easily how to record to DVD discs.  
Note:  
Make sure batteries are in the remote control and you have connected this unit and the TV correctly.  
Step 1: Choose a disc type  
Step 2: Insert a blank disc  
Remote Control  
There are several types of DVD disc recordable  
to choose from. Choose an applicable type by  
“DVD disc types” on this page.  
This unit can record on the following type of  
discs.  
Open the  
disc tray  
2
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
1
CH  
GHI  
JKL  
MNO  
Turn on  
the unit  
For example, when you want to record repeated-  
ly on the same disc or when you want to edit the  
disc after recording, select the rewritable DVD-  
RW type disc.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Close the  
disc tray  
3
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
JKL  
MNO  
When you want to save recordings without any  
alteration, a non-rewritable DVD-R can be your  
choice.  
Loading  
This operation may take a  
while to be recognized.  
DVD disc types  
Format the disc  
.
Insert the disc in the unit.  
Then, format the disc from  
SETUP menu.Video format  
(Video mode) orVideo  
: Most suitable.  
You want to  
RecordTV programs  
: Can be used.  
: Some functions are limited.  
: Cannot be used.  
DVD-RW VR  
DVD-RW Video  
DVD-R  
Reuse by deleting unwanted contents  
Edit recorded contents  
recording format (VR mode)  
will be available depending on  
the disc type inserted.This is  
necessary to prepare the disc  
for recording. Details are on  
pages 28-30.  
Edit/Record from connected equipment  
Copy discs for distribution  
*1  
*1  
Play on other DVD equipment  
Features  
Recording  
Rewritable?  
DVD-RW VR  
DVD-RW Video  
DVD-R  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
No  
No  
Yes  
No  
Yes  
No  
Can create chapters at fixed intervals (auto.)  
Can create chapters wherever you like (manual)  
Can record 16:9 size pictures  
Can record Copy-Once programs  
Editing  
Can perform basic edit functions  
Yes  
Yes  
Yes  
No  
Yes  
No  
Can perform advanced edit functions (Playlist edit)  
*1  
DVD-RW (VR mode) can only be played on DVD  
equipment that isVR compatible.  
Note:  
For details of the above functions and implied  
restrictions, see the explanations inside the manual.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Easy DVD recording (Cont’d)  
Step 3: Select the  
Recording  
Step 4: Select the  
desired  
Step 5: Record to  
DVD discs  
speed  
channel  
1
2
3
CH  
GHI  
4
JKL  
5
MNO  
6
To select the DVD mode  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
OPEN/CL
POWER  
REC SPEED AUDIO  
POWER  
REC SPEED 
2
.@/:  
1
ABC  
2
DEF  
3
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
REC/OTR  
SETUP  
TIMER PROG.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
ENTER  
REC MONITOR  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
DISPLAY  
VCR  
DVD  
USE  
1
To select the recording  
speed  
2
SP 2:01 Rem.  
I
CH 1  
Hint 1: Play the recorded contents  
You can select the title you want to play from a displayed menu and immedi-  
ately start to play. Recorded contents are very accessible on a disc, the proce-  
dure is simple really as you choose a  
Step 6: Stop the  
Record  
title on a chapter from the menu  
screen.  
Start Rec.  
Stop/Start  
Stop Rec.  
What are titles and chap-  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
Title 1  
Title 2  
SPACE  
0
SLOW  
ters?  
The contents of DVD disc are generally  
divided into titles.Titles may be further  
subdivided into chapters.  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2  
STOP  
REC/OTR  
SETUP  
TIMER PR
ENTER  
Hint 2: Edit the recorded disc  
You will find editing discs is very easy and the unit offers convenient edit func-  
tions, which are possible only with DVD-R/RW discs.  
You can edit the following from a title list.  
• Putting names on titles  
58%  
Writing to Disc  
• Setting pictures for thumbnails (VR mode)  
• Setting/clearing chapter markers  
• Deleting parts of titles (VR mode)  
Original and Playlist (VR mode)  
You can edit the recordings in Playlist without changing the original record-  
ings.Any Playlist does not take up much disc space.  
What “Original” or “Playlist” is for?  
Throughout this manual, you will find Original and Playlist to refer to the actual  
content and the edited version.  
• Original content refers to what’s actually recorded on the disc.  
• Playlist content refers to the edited version of the disc; how the Original  
content is to be played.  
This operation may  
take a while to be  
completed.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Channel setting  
All channels are stored in the unit  
when purchased.We recommend  
that you get available channels in  
your area stored using “Auto  
Preset” in the Channel Preset of  
the SETUP menu.  
4
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “SETUP” using { /  
buttons, then press ENTER  
button.  
B
1
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SETUP menu will appear.  
SPACE  
0
Getting channels auto-  
matically  
DISPLAY  
VCR  
DVD  
PAUSE  
Setup  
PLAY  
STOP  
1
3
7
REC/OTR  
SETUP  
TIMER PROG.  
Press POWER button to turn  
on the unit.  
ENTER  
SKIP  
REC MONITOR  
Playback Setting  
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
2
CM SKIP  
MODE  
5
Turn theTV on and be sure  
to select the input to which  
the unit is connected.  
Select “Channel” using K /  
L
/
{ / B buttons, then press  
To select a channel  
ENTER button.  
You can select a channel by  
Channel Preset menu will appear.  
directly entering channel using  
the Number buttons on the  
remote control.  
Setup > Channel Preset VCR DVD  
Auto Preset  
Notes for using the  
Number buttons:  
Manual Preset  
TV Audio Select  
Stereo  
• When selecting cable channels  
which are higher than 99,  
enter channel numbers as a  
three-digit number.(For exam-  
ple: 117, press 1,1,7)  
•You must precede single-digit  
channel numbers with a zero  
(For example: 02, 03, 04 and  
so on).  
6
3
Select “Auto Preset” using  
K
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
/
L buttons, then press  
ENTER button.  
The unit will start getting chan-  
nels available in your area.  
•
You can select the line input  
mode (“L1” or “L2”).To select  
“L1” by pressing [0],[0],[1].To  
select “L2” by pressing  
CH 18  
[0],[0],[2].Details are on page 38.  
Auto Presetting Now  
Note  
• If the auto presetting is can-  
celled during presetting, some  
channels not yet preset may  
not be received.  
Setup Menu  
• The selection will depend on  
how you receive the TV chan-  
nels.  
To cancel the auto preset-  
ting during scanning:  
Press RETURN button or  
SETUP button to cancel.  
7
Press SETUP button to exit.  
•You can select only the channels  
memorized in this unit by using  
the CHANNEL buttons.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Channel setting (cont’d)  
Adding/deleting channels  
4
The channels you no longer  
Select “Manual Preset” using  
receive or seldom watch can be  
deleted from the memory.You also  
may add channels into memory.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
K / L buttons, then press  
ENTER button.  
Manual Preset menu will appear.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Setup > Channel Preset > Manual Preset  
1
SPACE  
0
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
DISPLAY  
VCR  
DVD  
PAUSE  
CH2  
Add  
Delete  
PLAY  
STOP  
1
7
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
5
CM SKIP  
MODE  
Select the channel number to  
add or delete.  
Setup Menu  
Press { button to move to a  
lower channel number.  
Press B button to move to a  
higher channel number.  
2
Select “SETUP” using { /  
B
Setup > Channel Preset > Manual Preset  
buttons, then press ENTER  
button.  
SETUP menu will appear.  
CH18  
Add  
Delete  
Setup  
6
Playback Setting  
Select “Add” or “Delete”  
using K / L buttons, then  
press ENTER button.  
3
The channel number will be  
added or deleted from the chan-  
nel memory.The next channel  
number will appear so that you  
can continue adding or deleting  
channels.  
Select “Channel” using K /  
L
/
{ / B buttons, then press  
ENTER button.  
Channel Preset menu will appear.  
Setup > Channel Preset VCR DVD  
Auto Preset  
Manual Preset  
7
TV Audio Select  
Stereo  
Press SETUP button to exit.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Selecting theTV stereo or SAP  
You can select a sound channel to  
output from TV. “Stereo” has  
been selected as the default.  
4
Select “TV Audio Select”  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
1
.@/:  
1
ABC  
2
DEF  
3
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Setup > Channel Preset VCR DVD  
SPACE  
0
Auto Preset  
DISPLAY  
VCR  
DVD  
PAUSE  
Manual Preset  
TV Audio Select  
Stereo  
SAP  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
6
ENTER  
SKIP  
REC MONITOR  
2
3
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
Setup Menu  
CLEAR/C-RESET ZOOM  
SEARCH  
5
CM SKIP  
MODE  
Select “Stereo” or “SAP”  
using K / L buttons, then  
press ENTER button.  
2
Select “SETUP” using { /  
buttons, then press ENTER  
button.  
B
Stereo:  
Outputs main-audio.  
SAP:  
SETUP menu will appear.  
(Secondary Audio Program)  
Outputs sub-audio.  
Refer to the item in “Glossary”  
on page 102 for more informa-  
tion.  
Setup  
Playback Setting  
6
Press SETUP button to exit.  
3
Select “Channel Preset”  
using K / L / { / B buttons,  
then press ENTER button.  
Channel Preset menu will appear.  
Setup > Channel Preset VCR DVD  
Auto Preset  
Manual Preset  
TV Audio Select  
Stereo  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Clock setting  
Set the clock before you try the  
timer recording. If a Public  
Broadcasting Station (PBS) is available  
in your area, follow Auto Clock  
Setting below. If not, follow Manual  
Clock Setting on pages 22-23.  
4
Select “Auto Clock Setting”  
using K / L buttons, then  
press ENTER button.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
7
.@/:  
1
ABC  
2
DEF  
3
Option window will appear.  
CH  
GHI  
4
JKL  
5
MNO  
6
Auto Clock Setting  
Make sure  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
VCR DVD  
Setup > Clock  
SPACE  
0
• The antenna/cable TV connec-  
tions are correct.  
• If this unit is connected to a  
Cable Box or Satellite Box, select  
the local PBS station on them to  
set the clock automatically.  
Clock Setting  
OFF  
DISPLAY  
VCR  
DVD  
PAUSE  
Auto Clock Setting  
Auto  
Daylight Saving Time  
Manual  
PLAY  
STOP  
1
6
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
3
4
5
1
MENU/LIST TOP MENU  
RETURN  
SKIP  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
CLEAR/C-RESET ZOOM  
SEARCH  
5
CM SKIP  
MODE  
• If you do not know your  
PBS channel number, select  
“Auto” using K / L buttons,  
then press ENTER button.  
• If you know your PBS chan-  
nel number, select “Manual”  
using K / L buttons, then  
press ENTER button.  
Setup Menu  
VCR DVD  
Setup > Clock  
Clock Setting  
OFF  
Set Channel No.  
Auto Clock Setting  
2
CH1  
Daylight Saving Time  
Manual  
Select  
“
SETUP  
”
using { /  
B
but-  
tons, then press ENTER button.  
SETUP menu will appear.  
Setup  
Enter your PBS channel  
number using Number or  
K
/
L buttons, then press  
ENTER button.  
Playback Setting  
6
Note  
Press SETUP button to exit.  
3
• The clock may set itself auto-  
matically after you connect the  
antenna/cable signal to this  
unit and plug in the power  
cord. In this case, the current  
time will appear on the display  
of the front panel.  
• If the current time is not dis-  
played or the displayed clock  
is not correct, set the clock  
manually.  
Select “Clock” using K / L / { /  
buttons, then press ENTER button.  
Clock menu will appear.  
B
7
Press POWER button to turn  
off the unit.  
Setup > Clock  
VCR DVD  
This unit will search for the time  
only when the power is off. Leave  
it off for several minutes to give  
this unit time to set the clock on  
the display of the front panel.  
Clock Setting  
Auto Clock Setting  
Daylight Saving Time  
Auto  
ON  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Clock setting (cont’d)  
Manual Clock Setting  
4
Select “Clock Setting” using  
1
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
K / L buttons, then press  
ENTER button.  
A clock setting window will  
appear.  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
VCR DVD  
Setup > Clock  
DISPLAY  
VCR  
DVD  
PAUSE  
Clock Setting  
Auto Clock Setting  
Auto  
ON  
Daylight Saving Time  
PLAY  
- - - / - - / - - - - ( - - - )  
- - : - -  
STOP  
1
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
Setup Menu  
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
Press ENTER button again.  
Default date will appear.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
2
Select “SETUP” using { /  
buttons, then press ENTER  
button.  
B
5
Enter the date (month / day /  
year) using K / L buttons.  
Press { / B buttons to move  
the cursor.  
SETUP menu will appear.  
Setup  
VCR DVD  
Setup > Clock  
Clock Setting  
Auto Clock Setting  
Auto  
ON  
Daylight Saving Time  
JAN / 12 / 2004 (MON)  
12 : 00AM  
Playback Setting  
3
Select “Clock” using K / L /  
{ / B buttons, then press  
ENTER button.  
6
Enter the time (hour /  
minute) using K / L buttons.  
Press { / B buttons to move  
the cursor.  
Clock menu will appear.  
Setup > Clock  
VCR DVD  
Clock Setting  
Auto Clock Setting  
Daylight Saving Time  
Auto  
ON  
VCR DVD  
Setup > Clock  
Clock Setting  
Auto Clock Setting  
Auto  
ON  
Daylight Saving Time  
JAN / 12 / 2004 (MON)  
09 : 24 AM  
Note  
•
Your clock setting will be lost if  
either there is a power failure  
or this unit has been unplugged  
for more than 30 seconds  
when you set the clock manu-  
ally.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Clock setting (cont’d)  
7
8
Press SETUP button to exit.  
Although seconds are not displayed,  
they begin counting from zero.  
Press K / L buttons to select  
AM or PM, then press ENTER  
button.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
Clock menu will appear, then the  
settings will be activated.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
Setup > Clock  
VCR DVD  
DISPLAY  
VCR  
DVD  
PAUSE  
Clock Setting  
Auto Clock Setting  
Daylight Saving Time  
Auto  
ON  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
8
ENTER  
SKIP  
REC MONITOR  
7
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
When “Auto Clock Setting” is selected to “Auto” or  
“Manual”, change it to “OFF” as following steps.  
Repeat steps (1) to (3) in “Manual Clock Setting”.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
6
ENTER  
SKIP  
REC MONITOR  
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
Select “Auto Clock Setting”  
Select “OFF” using K /  
L
CLEAR/C-RESET ZOOM  
SEARCH  
buttons, then press ENTER  
button.  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
CM SKIP  
MODE  
4
5
6
VCR DVD  
Setup > Clock  
Clock Setting  
OFF  
Press SETUP button to exit.  
Auto Clock Setting  
Auto  
Daylight Saving Time  
Manual  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Clock setting (cont’d)  
Setting the daylight sav-  
ing time  
4
When Daylight Saving Time is  
ON, the clock will automatically  
move forward one hour on the  
first Sunday in April and move  
back one hour on the last Sunday  
in October.  
Select “Daylight Saving  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Time” using K / L buttons,  
then press ENTER button.  
Daylight Saving Time options will  
appear.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
VCR DVD  
Setup > Clock  
DISPLAY  
VCR  
DVD  
PAUSE  
1
Clock Setting  
Auto Clock Setting  
Auto  
ON  
OFF  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
Daylight Saving Time  
PLAY  
STOP  
1
6
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
3
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
5
Select “ON” or “OFF” using  
K / L buttons, then press  
ENTER button.  
Setup Menu  
Choose “ON” when currently  
observing the daylight saving time.  
2
6
Select “SETUP” using { /  
B
Press SETUP button to exit.  
buttons, then press ENTER  
button.  
SETUP menu will appear.  
Setup  
Playback Setting  
3
Select “Clock” using K / L /  
{ / B buttons, then press  
ENTER button.  
Clock menu will appear.  
Setup > Clock  
VCR DVD  
Clock Setting  
Auto Clock Setting  
Daylight Saving Time  
Auto  
ON  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Selecting theTV aspect ratio  
You can select the TV aspect ratio  
Playback menu will appear.  
to match the formats of what you  
are playing with the unit and your  
TV screen (4:3 standard or 16:9  
widescreen TV).  
“4:3 Letter Box” has been select-  
ed as the default.  
DVD  
Setup > Playback  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
Dynamic Range Control  
Fast Forward with Audio  
ON  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
OFF  
SPACE  
0
1
DISPLAY  
VCR  
DVD  
PAUSE  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
4
PLAY  
Select “TV Aspect” using K /  
L buttons, then press ENTER  
button.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
6
ENTER  
SKIP  
REC MONITOR  
2
3
4
5
Option window will appear.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
DVD  
Setup > Playback  
CM SKIP  
MODE  
TV Aspect  
4:3 Letter Box  
Parental Lock  
4:3 Pan & Scan  
16:9 Wide  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
Original  
OFF  
Setup Menu  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
2
Refer to the Note on this  
page.  
Select “SETUP” using { /  
B
buttons, then press ENTER  
button.  
5
SETUP menu will appear.  
Select a desired option using  
K / L buttons, then press  
ENTER button.  
Setup  
6
Press SETUP button to exit.  
Playback Setting  
3
Select “Playback” using K /  
L
/
{ / B buttons, then press  
ENTER button.  
Note  
If you have a standardTV:  
Select “4:3 Letter Box”, so that  
black bars appear on the top  
and bottom of the screen.  
Select “4:3 Pan & Scan” for a  
full height picture with both  
sides trimmed.  
If you have a widescreenTV:  
Select “16:9 Wide”.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Information on DVD recording  
Information  
Recording speed  
You can select a recording speed among 6 options,  
and the recording time will depend on the record-  
ing speed you select as follows.  
This unit can record to DVD-R and DVD-RW discs.  
When recording, you will need to select a recording  
format betweenVideo mode andVR mode depend-  
ing on the disc format.The disc format for DVD-R  
is always “Video format,” so a recording format will  
be “Video mode”.  
On the other hand, when recording to DVD-RW, a  
recording format will be “Video mode” or “VR  
mode” because a disc format is available between  
“Video Recording format” and “Video format” for  
DVD-RW.  
Recording Recording  
Video/Sound Quality  
speed  
time *  
XP (1H)  
60 min  
SP (2H)  
LP (4H)  
EP (6H)  
120 min  
240 min  
360 min  
Logo  
Attributes  
12cm, single-sided, single layer disc  
Approx. max. recording time (SEP mode):  
600 minutes (4.7GB)  
SLP (8H) 480 min  
DVD-RW  
SEP (10H) 600 min  
12cm, single-sided, single layer disc  
Approx. max. recording time (SEP mode):  
600 minutes (4.7GB)  
*This table is designed for a new single-sided 12cm  
disc as the standard.The recording time are esti-  
mates and actual recording time may differ.  
*The audio and video quality is getting poorer as  
the recording time becomes longer.  
DVD-R  
AboutVideo mode andVR (Video Recording)  
mode  
Video mode is the same recording format as DVD-  
Video discs purchased locally, so that you can play in  
most DVD players.To play in other DVD players,  
you will need to finalize (see page 39). If not final-  
ized, you can play, record additionally or edit discs  
recorded inVideo mode with this unit.  
VR (Video Recording) mode is a basic recording  
format for DVD-RW.You can record and edit  
repeatedly.  
Restrictions on recording  
You cannot record copy-protected video using this  
unit. Copy-protected video includes DVD-Video  
discs and some satellite broadcasts.  
If copy-protected material is encountered during a  
recording, the unit will pause or stop automatically  
and an error message will be displayed on-screen.  
Video that is “copy-once only” can only be recorded  
using a DVD-RW disc inVR mode with CPRM (see  
below).  
DVD players with  
are capable of playing  
DVD-RW recorded inVR mode.  
When recording a TV broadcast or through an  
external input, you can display copy control informa-  
tion on screen.  
Disc type Disc format Functions  
Video mode  
Video  
Playing, limited recording,  
limited editing  
What is “CPRM”?  
DVD-RW  
CPRM is a copy protection system with scram-  
ble system regarding the recording of “copy  
once” broadcast programs. CPRM stands for  
Content Protection for Recordable Media.  
This unit is CPRM compatible, which means  
that you can record copy-once broadcast pro-  
grams, but you cannot then make a copy of  
those recordings. CPRM recordings can only be  
made on DVD-RW discs formatted inVR  
mode, and CPRM recordings can only be played  
on players that are specifically compatible with  
CPRM.  
VR mode  
VR  
Playing, recording,  
Original/Playlist editing  
DVD-RW  
DVD-R  
DVD-RW  
Video mode  
Playing, limited recording,  
limited editing  
DVD-R  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Information on DVD recording (cont’d)  
Information on copy control  
Making discs playable in other DVD  
player (Finalize)  
Some satellite broadcasts include copy-protected  
information. For recording these, refer to the fol-  
lowing.  
You will need to finalize discs when in the following:  
- when playing DVD-R/RW (Video mode) recorded  
with this unit in other DVD players.  
- when DVD-RW (VR mode) recorded with this  
unit fails to be played in other RW compatible DVD  
players.  
• Once DVD-R/RW (Video mode) is finalized, you  
cannot record additionally or edit.  
• You can record additionally to or edit DVD-RW  
(VR mode), which is finalized with this unit.  
• Be sure to finalize discs recorded with this unit by  
using this unit.  
Disc type/  
format  
Copy-  
prohibited  
Copy-free Copy-once  
VR mode  
DVD-RW  
ver.1.0  
ver.1.1  
ver.1.1 CPRM  
compatible  
Video mode  
DVD-RW  
ver.1.1  
ver.1.1 CPRM  
compatible  
• Title menu will be created automatically in DVD-  
R/RW (Video mode) finalized with this unit.  
To play in other DVD players, finalize discs recorded  
from this unit with the following condition.  
Video mode  
DVD-R  
ver.2.0  
Disc type  
Mode  
Recordable  
DVD-R  
ver.2.0  
Recordable only for DVD-RW ver.1.1 compatible  
Video mode  
with CPRM  
Not Recordable  
DVD-RW  
ver.1.1  
Video mode  
ver.1.1 CPRM compatible  
Note  
• The audio and video quality is getting poorer as  
the Recording time becomes longer.  
• This unit cannot record CD-R or CD-RW discs.  
• DVD-R/RW and CD-R/RW discs recorded using  
a personal computer or a DVD or CD recorder  
may not play if the disc is damaged or dirty, or if  
there is dirt of condensation on the units lens.  
• If you record a disc using a personal computer,  
even if it is recorded in a compatible format,  
there are cases in which it may not play because  
of the settings of the application software used  
to create the disc. (Check with the software pub-  
lisher for more detailed information.)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Formatting a disc  
Settings for the recording format to a blank disc  
Video  
DVD-RW  
VR  
DVD-RW  
3
When inserting a blank disc, the  
unit starts to initialize the blank  
disc.  
After that, you can record to the  
disc with the recording format  
selected in SETUP menu.  
You are allowed to set a specified  
time for chapter marks.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Recording” using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Recording menu will appear.  
SPACE  
0
DVD  
Setup > Recording  
DISPLAY  
VCR  
DVD  
PAUSE  
DVD-RW Recording Format  
Auto Chapter  
Video mode  
10 minutes  
PLAY  
Timer Programming  
Dubbing Mode  
VCR DVD  
STOP  
1
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
SKIP  
REC MONITOR  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
2
3
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
Select “DVD-RW Recording  
Format” using K / L buttons,  
then press ENTER button.  
Option window will appear.  
DVD  
Setup > Recording  
Setup Menu  
Video mode  
DVD-RW Recording Form
Auto Chapter  
VR mode  
Timer Programming  
Dubbing Mode  
VCR DVD  
Video mode  
DVD Player Compatibility mode.  
VR mode  
2
Select “SETUP” using { /  
B
Editing possibility mode.  
buttons, then press ENTER  
button.  
SETUP menu will appear.  
Video mode has been selected as  
the default.  
Setup  
5
Select “Video mode” or “VR  
mode” using K / L buttons,  
then press ENTER button.  
The recording mode will be set.  
Playback Setting  
Note  
• When inserting a blank  
DVD+R or DVD+RW disc,  
the error message ("Disc  
Error") will appear.This unit is  
not compatible with a  
DVD+R/RW disc.  
• If using a DVD-RW (ver 1.0)  
disc, recording will start inVR  
mode even if you choose  
video mode in SETUP menu.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Formatting a disc (cont’d)  
6
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Auto Chapter” using  
.@/:  
1
ABC  
2
DEF  
3
K / L buttons, then press  
ENTER button.  
CH  
GHI  
4
JKL  
5
MNO  
6
Option window will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DVD  
Setup > Recording  
DISPLAY  
VCR  
DVD  
PAUSE  
DVD-RW Recording Forma
Auto Chapter  
OFF  
5 minutes  
10 minutes  
15 minutes  
30 minutes  
Timer Programming  
Dubbing Mode  
PLAY  
STOP  
60 minutes  
REC/OTR  
SETUP  
TIMER PROG.  
8
ENTER  
SKIP  
REC MONITOR  
6
7
MENU/LIST TOP MENU  
RETURN  
SKIP  
“10 minutes” has been selected as  
the default.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
7
Select a desired time option  
using K / L buttons, then  
press ENTER button.  
Chapter marks will be put as you  
specified.  
8
Press SETUP button to exit  
SETUP menu.  
Note  
• The time for chapter marks is  
not accurate inVideo mode.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Formatting a disc (cont’d)  
Reformatting a disc  
Video  
DVD-RW  
VR  
DVD-RW  
4
If you are using a DVD-RW disc,  
by default it will beVideo mode.  
You can change this toVR mode  
from SETUP menu.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Option window will appear.  
SPACE  
0
1
Disc  
DISPLAY  
VCR  
DVD  
PAUSE  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
Edit  
Format  
PLAY  
Finalize  
Disc Protect OFF ON  
STOP  
Yes  
No  
REC/OTR  
SETUP  
TIMER PROG.  
Are you sure?  
ENTER  
SKIP  
REC MONITOR  
1
Yes  
No  
2
3
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
*VR mode only  
CM SKIP  
MODE  
5
Setup Menu  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Formatting will start.  
2
Select “DISC” using { / B but-  
tons, then press ENTER button.  
DISC menu will appear.  
Disc  
Edit  
58%  
Format  
Formatting  
Finalize  
Disc Protect OFF ON  
6
Formatting is complete.  
*VR mode only  
100% will be indicated.  
3
Select “Format” using K /  
L
buttons, then press ENTER  
button.  
Option window will appear.  
100%  
Formatting  
Disc  
Edit  
This operation may take a  
while to be completed.  
Format  
Finalize  
Note  
Disc Protect OFF ON  
• When you reformat the disc,  
the contents of the disc will  
be erased.  
Yes  
No  
• If you want to cancel format  
at step 5, select “No”.  
*VR mode only  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Basic recording  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
4
Follow the steps below to record  
TV programs.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
2
4
Select a desired channel to  
DVD  
.@/:  
1
ABC  
2
DEF  
3
record using CH K / L but-  
tons or number buttons.  
First:  
CH  
GHI  
4
JKL  
5
MNO  
6
4
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
SPACE  
0
Turn on the unit and load a  
recordable disc.  
CH 1  
DISPLAY  
VCR  
DVD  
PAUSE  
5
Make sure that the TV input is set  
on the unit.  
PLAY  
STOP  
6
REC/OTR  
SETUP  
TIMER PROG.  
This operation may take a  
while to be recognized.  
ENTER  
SKIP  
REC MONITOR  
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
5
2
CM SKIP  
MODE  
Press REC/OTR button to  
start recording.  
Select a recording speed  
using REC SPEED button.  
I mark will be displayed for 5  
seconds.  
SP 2:01 Rem.  
I
Refer to “Recording speed” on  
page 26.  
To pause the recording, press  
PAUSE F button. Press REC/OTR  
button to restart the recording.  
Note  
3
• Recording starts immediately  
and continues until the disc is  
full or you stop recording.  
• When the clock setting has  
not been made, the space for  
a date and time of title names  
in the original or playlist will  
be blank.  
• You cannot mix two formats  
on one DVD-RW disc.  
When you load a disc once  
recorded before, the record-  
ing format cannot be changed  
even if you change it in  
Make sure that the recording  
format is set to the desired  
mode.  
6
Press STOP C button to stop  
Refer to “Formatting a disc” on  
pages 28-30.  
the recording.  
This operation may take a  
while to be completed.  
When a DVD-RW disc is  
loaded:  
You can chooseVideo mode or  
VR mode from SETUP menu.  
“Video mode” has been selected  
as the default. Refer to “Settings  
for the recording format to a  
blank disc” on pages 28-29.  
SETUP menu.  
• You cannot change the  
recording speed during the  
REC pause mode.  
• You can change a channel  
during the REC pause mode.  
When a DVD-R disc is loaded:  
DVD-R discs will always be in  
Video mode.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Basic recording (cont’d)  
Checking the recording picture quality  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
OPEN/CLOSE  
POWER  
1
REC SPEED AUDIO  
2
You can confirm the recording pic-  
ture quality with the recording  
speed you have selected before  
attempting to record to a DVD disc.  
.@/:  
1
ABC  
2
DEF  
3
Press REC MONITOR button  
again to exit.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DVD  
First:  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
1
STOP  
While the unit is in STOP or  
REC with a DVD disc to  
record inserted, press REC  
MONITOR button.  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
1
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
The TV program will be on the  
screen in the recording picture  
quality with the recording speed  
you have selected.  
CM SKIP  
MODE  
CH 18  
Rec Monitor  
XP  
If you want to change the  
recording speed, press REC  
SPEED button repeatedly.  
The recording speed will be  
changed as you press the button  
as shown. Refer to “Recording  
speed” on page 26.  
• You cannot change the record-  
ing speed during recording.  
XP  
SP  
LP  
SEP  
SLP  
EP  
Note  
• You cannot check the record-  
ing sound quality with the  
Rec monitor function.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
One-touch timer recording  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
4
This is a simple way to set the  
recording time in blocks of 30  
minutes. Check that the disc you  
are recording onto has enough  
space for the time you set.  
When the recording finishes the  
recorder automatically goes into  
standby.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
2
Select a desired channel to  
.@/:  
1
ABC  
2
DEF  
3
record using CH K / L but-  
tons or number buttons.  
CH  
GHI  
4
JKL  
5
MNO  
6
4
5
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
5
DISPLAY  
VCR  
DVD  
PAUSE  
Press REC/OTR button, then  
press REC/OTR button  
repeatedly until a desired  
recording time (30 minutes  
to 8 hours) appears on theTV  
screen.  
DVD  
PLAY  
First:  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
5
ENTER  
SKIP  
REC MONITOR  
Turn on the unit and load a  
recordable disc.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
Recording will start.  
CLEAR/C-RESET ZOOM  
SEARCH  
Make sure that the TV input is set  
on the unit.  
CM SKIP  
MODE  
This operation may take a  
while to be recognized.  
0:30  
I
2
Select a recording speed  
using REC SPEED button.  
Refer to "Recording speed" on  
page 26.  
0:30  
(Normal Recording) 1:00  
8:00  
7:30  
3
When the unit reaches the speci-  
fied time, it will turn off automati-  
cally.  
Make sure that the recording  
format is set to the desired  
mode.  
Refer to "Formatting a disc" on  
pages 28-30.  
To cancel the one-touch timer  
recording within the specified  
time, press STOP C button.  
When a DVD-RW disc is  
loaded:  
This operation may take a  
while to be completed.  
You can chooseVideo mode or  
VR mode from SETUP menu.  
"Video mode" has been selected  
as the default. Refer to pages 28-  
29 "Settings for the recording for-  
mat to a blank disc."  
Note  
• The unit will turn off auto-  
matically under the conditions  
following.  
1)No space remained on the  
disc.  
2)When a power failure  
occurs.  
• If OTR is finished in DVD  
during playback or REC mode  
inVCR, the DVD will be in  
STOP mode and theVCR  
keeps the current mode.  
When a DVD-R disc is loaded:  
DVD-R discs will always be in  
Video mode.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Timer recording  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
VCR  
You can choose the timer  
programming menu by press-  
ing TIMER PROG. button. In  
this case, continue with step 5.  
4
Select “Timer Programming”  
You can program the unit to record  
up to 8 programs, up to a year in  
advance. Daily or weekly program  
recordings are also available.  
• Be sure to set the clock before  
making a timer programming.  
• Insert a recordable disc or a  
tape with a safety tab.  
using K / L buttons, then  
press ENTER button.  
Timer Programming list will  
appear.  
OPEN/CLOSE  
POWER  
REC SPEED AUD
.@/:  
1
ABC  
2
DEF  
3
Setup > Recording > Timer Programming  
CH  
GHI  
4
JKL  
5
MNO  
6
DVD  
Date  
- - -  
Start  
End  
CH  
Speed  
VCR  
PQRS  
7
TUV  
8
WXYZ  
9
IDEO/TV  
SLOW  
- - -  
- - -  
SPACE  
0
1
DISPLAY  
VCR  
DVD  
AUSE  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
5
PLAY  
STOP  
Select the program which is  
1
REC/OTR  
SETUP  
TIMER PROG.  
not set up using K / L but-  
tons, then press ENTER but-  
ton.  
ENTER  
SKIP  
REC MONITOR  
2
3
4
5
6
7
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
6
Enter the date using K /  
L
buttons, then press B button.  
Setup Menu  
Setup > Recording > Timer Programming  
DVD  
Date  
Start  
End  
CH  
Speed  
VCR  
2
JAN / 01 - - : - -AM - - : - -AM CH8 DVD  
- - -  
- - -  
- - -  
Select “SETUP” using { /  
buttons, then press ENTER  
button.  
B
e.g. January 1st  
SETUP menu will appear.  
JAN/01  
When pressing L button at the  
current date, timer recording  
mode will change as follows.  
L
Setup  
Daily  
L
MON-SAT  
L
MON-FRI  
L
SAT  
L
Playback Setting  
FRI  
L
Note  
3
L
• If you have not set the  
clock yet:  
SUN  
L
Select “Recording” using K /  
L / { / B buttons, then press  
ENTER button.  
A clock setting window will  
appear after step 4. Continue  
with the step 4 in “Auto  
Clock Setting” on page 21 or  
“Manual Clock Setting” on  
page 22 before making a  
timer programming.  
• Press { or B buttons to  
move the cursor to the left  
and the right in the timer  
programming menu.  
DEC/31  
Recording menu will appear.  
7
DVD  
Setup > Recording  
Enter the time to start and  
to end using K / L buttons,  
then press B button.  
DVD-RW Recording Format  
Auto Chapter  
Video mode  
10 minutes  
Timer Programming  
Dubbing Mode  
VCR DVD  
Setup > Recording > Timer Programming  
DVD  
Date  
Start  
End  
CH  
Speed  
VCR  
JAN/12 10 :00PM - - : - -AM CH8 DVD  
- - -  
- - -  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Timer recording (cont’d)  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
8
10  
12  
Select the channel number to  
record using K / L buttons,  
then press B button.  
Select a recording speed  
using K / L buttons.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Setup > Recording > Timer Programming  
DVD  
Date  
Start  
End  
CH  
Speed  
VCR  
Setup > Recording > Timer Programming  
SPACE  
0
JAN/12 10:00PM 10:30PM CH8 DVD 1H  
- - -  
DVD  
Date  
Start  
End  
CH  
Speed  
VCR  
DISPLAY  
VCR  
DVD  
PAUSE  
JAN/12 10:00PM 10:30PM CH8 DVD  
- - -  
Refer to “Recording speed” on page  
26 for DVD or page 94 forVCR.  
To record from external input, L1  
or L2.  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
11  
8
9
ENTER  
SKIP  
REC MONITOR  
Press ENTER button when all  
information required is  
entered.  
Select a recording media  
using K / L buttons, then  
press B button.  
9
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
10  
11  
CM SKIP  
MODE  
Your program setting will be  
stored.  
• To set another program, repeat  
steps 5 to 11.  
Setup > Recording > Timer Programming  
DVD  
Date  
Start  
End  
CH  
Speed  
VCR  
JAN/12 10:00PM 10:30PM CH8 DVD  
- - -  
Note  
• After step 12, the unit will be  
turned on automatically 2  
minutes (ForVCR recording,  
10 seconds) in advance of the  
recording time to start and  
waits to start.Then the  
• To record on to a tape, selectVCR.  
• To record on to a disc, select DVD.  
• To exit, press SETUP button.  
12  
Press POWER button to turn off.  
indicator will appear on the  
front display.  
recording will start at the  
recording time you set.  
Checking, canceling, or correcting the timer programming  
information  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
6
.@/:  
1
ABC  
2
DEF  
3
1
4
CH  
GHI  
4
JKL  
5
MNO  
6
Press POWER button so that  
To clear the timer programming,  
select your desired program  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
indicator disappears from  
the front display.  
using K / L buttons, then press  
CLEAR/C-RESET button.  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
2
To correct the timer program-  
ming, select your desired pro-  
PressTIMER PROG. button.  
PLAY  
Timer Programming list will appear.  
STOP  
2
5
4
gram using K / L buttons, then  
press ENTER button.  
Next, correct the timer programming  
using K/L/{/B buttons.  
Finally, press ENTER button again.  
REC/OTR  
SETUP  
TIMER PROG.  
Setup > Recording > Timer Programming  
ENTER  
SKIP  
REC MONITOR  
DVD  
Date  
Start  
End  
CH  
Speed  
VCR  
JAN/12 10:00PM 10:30PM CH8 DVD 1H  
- - -  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
4
3
CM SKIP  
MODE  
Check the information on the  
list you will need.  
5
Note  
PressTIMER PROG. button to exit.  
• Press TIMER PROG. button to  
check the timer programming  
in process.  
When the timer recording is  
in process, that program will  
be red highlighted. In this case,  
you cannot select any other  
program.  
6
Press POWER button to return  
to the timer standby mode.  
To stop the timer recording in process  
Press STOP C button to stop the disc recording or STOP/EJECT  
stop the tape recording on the front panel of the main unit. STOP C but-  
C
A to  
ton on the remote control is not effective.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Timer recording (cont’d)  
Hints for timer recording  
•
If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.  
• If a disc is not on the tray, the DVD indicator on the front panel flashes and timer recording cannot be performed.  
Please insert a recordable disc.  
• If a tape with a record tab is not in the cassette compartment, theVCR indicator on the front panel flashes and timer  
recording cannot be performed. Please insert a recordable tape.  
• When all the timer recording is completed, the  
press POWER button first and then press PLAY B or OPEN/CLOSE A (or STOP/EJECT  
• The timer recording is not performed in DVD andVCR at the same time. If you set two programmings with the same  
channel and time both in DVD andVCR, the programming that has priority will be recorded.  
indicator flashes.To play or eject the recorded disc (or the tape),  
A) button.  
C
•
During timer recording or timer standby (  
available.To make these operations available, cancel the timer recording or timer standby first (  
indicator is on the front display), any operations on the unit will not be  
indicator disappears).  
• To cancel the timer standby mode, press POWER button.  
The priority of overlapped settings  
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming  
set previously has priority.  
A timer recording of lower priority will be canceled, start from the middle, or stop on the way.  
Check the overlapped timer programmings and change the priority if necessary.  
A programming set previously has priority  
When the starting time is the same:  
A program set previously (PROG.A) has priority.  
When some programming have been  
made at the end time of the  
programming currently being recorded:  
A program set previously (PROG. B) has priority.  
ex.1  
ex. 2  
PROG.A  
PROG. B  
PROG.A  
PROG. B  
PROG. C  
Actual  
recording  
Actual  
recording  
PROG.A  
PROG. B  
PROG.A  
PROG. B  
When the recording time is partially overlapped:  
PROG. A will start after PROG. B is complete to be recorded.  
PROG. A  
PROG. B  
Actual  
recording  
PROG. B  
PROG. A  
When the recording time is entirely overlapped:  
PROG. A will not be recorded.  
PROG. A  
PROG. B  
Actual  
recording  
PROG. B  
When the end time of the programming currently being recorded and the starting time  
of the one to be recorded sequentially are same:  
The first 20-90 seconds of the programming to be recorded sequentially will be cut off.  
PROG.A  
Note:  
After finishing the timer  
recording in DVD, other  
timer programmings  
cannot be performed for  
a while.  
PROG. B  
Actual  
recording  
PROG.A  
PROG. B  
The first 20-90 seconds will be cut off.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Settings for an external source  
Connection to an external source  
Connect the external source properly to the unit by using input jacks either LINE2 (Front) or LINE1 (Rear).  
S-VIDEO input is useful only in DVD mode.  
OUTPUT  
VIDEO AUDIO  
OUTPUT  
Another source  
S -VIDEO  
VIDEO AUDIO  
S-VIDEO  
(VCR camcorder etc.)  
R
L
L
R
or  
or  
S-Video  
cable  
Video  
cable  
Audio  
cable  
S-Video  
cable  
Video  
Audio  
cable  
cable  
DVD  
S-VIDEO  
DVD/VCR  
AUDIO IN  
L
R
or  
IN  
VIDEO IN  
S-VIDEO  
VIDEO  
L
-
AUDIO  
-
R
To LINE 2 IN  
To LINE 1 IN  
OPEN/CLOSE  
DVD  
AUDIO S-VIDEO  
D/VCR  
COMPONENT  
VIDEO OUT  
DIG
AUDIO IN ADIO OUT ANTENN  
AUDIO T OUT  
IN  
Y
L
L
POWER  
REW  
F.FWD STOP/EJECT PLAY  
DUBBING  
STOP  
PLAY  
L
CB  
R
R
OUTPUT SELECT  
S-VIDEO  
VIDEO  
L
-
AUDIO  
-
R
VCR  
CHANNEL  
DVD  
COAXIAL  
IN  
VIDEO IN VIDEO OUT  
OUT  
VCR  
DVD  
R
RECORD  
RECORD  
CR  
OUT  
Front of this unit  
Rear of this unit  
1. Press SETUP button to display SETUP/DISC 1. Press SETUP button to display SETUP/DISC  
menu.  
menu.  
2. Select “SETUP” using { / B buttons, then  
press ENTER button.  
2. Select “SETUP” using { / B buttons, then  
press ENTER button.  
3. Select “SelectVideo”, then press ENTER  
button.  
3. Select “SelectVideo”, then press ENTER  
button.  
DVD  
DVD  
Setup > Select Video  
Setup > Select Video  
L1 (Rear)  
L2 (Front)  
L1 (Rear)  
L2 (Front)  
Video In  
Video In  
Video In  
Video In  
4. Select “L2 (Front)”, then press ENTER but-  
4. Select “L1 (Rear)”, then press ENTER but-  
ton.  
ton.  
DVD  
DVD  
Setup > Select Video  
Setup > Select Video  
L1 (Rear)  
L2 (Front)  
L1 (Rear)  
L2 (Front)  
Video In  
S-Video In  
Video In  
S-Video In  
5. Select the input jack type to connect, then  
press ENTER button.  
5. Select the input jack type to connect, then  
press ENTER button.  
If you want to use S-VIDEO INPUT, select“S-Video In”.  
If you want to useVIDEO INPUT (Composite),  
select “Video In”.  
If you want to use S-VIDEO INPUT, select“S-Video In”.  
If you want to useVIDEO INPUT (Composite),  
select “Video In”.  
DVD  
DVD  
Setup > Select Video  
Setup > Select Video  
L1 (Rear)  
L2 (Front)  
L1 (Rear)  
L2 (Front)  
Video In  
S-Video In  
Video In  
S-Video In  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Settings for an external source (cont’d)  
Recording from an external source  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
VCR  
Before recording from an external source, see the instructions for the connection on page 37.  
1. Turn theTV and the unit on, and be sure to select the input  
of theTV to which the unit is connected.  
OPEN/CLOSE  
4
1
POWER  
REC SPEED AUDIO  
2
7
.@/:  
1
ABC  
2
DEF  
3
DVD  
CH  
GHI  
4
JKL  
5
MNO  
6
2. When you want to record to the disc: Press:  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Press OPEN/CLOSE A button to open the disc tray, then  
place the disc to record properly.  
SPACE  
0
3
DISPLAY  
VCR  
DVD  
PAUSE  
This operation may take a while to be recognized.  
VCR  
PLAY  
When you want to record to a tape: Press:  
Insert the tape with a safety tab into the cassette compart-  
ment.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
5
ENTER  
SKIP  
REC MONITOR  
3. Select the input of the unit which the external equipment is  
connected. (L2 or L1)  
•To use the input jacks on the back of this unit, select “L1” position by  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
pressing [0],[0],[1] on the remote control or the CH K / L buttons.  
•To use the input jacks on the front of this unit, select “L2” position  
by pressing [0],[0],[2] on the remote control or the CH K / L but-  
tons.  
4. Select a recording speed using REC SPEED button. Refer to  
“Recording speed” on page 26 for DVD or page 94 forVCR.  
XP  
SP  
LP  
EP  
SP  
SLP  
SEP  
SLP  
DVD mode  
VCR mode  
5. Press REC/OTR button on the unit to start recording.  
6. Press PLAY button on the external source to record from.  
7. For disc:  
Press STOP C button on the unit to stop recording.  
This operation may take a while to be completed.  
For tape:  
Press STOP/EJECT  
ing.  
C
A button on the unit to stop record-  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Dubbing Mode  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
VCR  
2
Select “SETUP” using { /  
B
You can copy a DVD disc to a  
videotape or copy a videotape to  
a DVD disc.This function will be  
possible only if the DVD disc or  
the tape is not copy protected.  
Before starting this function, pre-  
pare for the recording on the  
DVD-R/RW disc or the videotape.  
Refer to pages 26-42, 94.  
buttons, then press ENTER  
button.  
SETUP menu will appear.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Setup  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
STOP  
Playback Setting  
1
REC/OTR  
SETUP  
TIMER PROG.  
Make sure:  
ENTER  
SKIP  
REC MONITOR  
• Insert a disc and a tape with a  
safety tab.  
Note for recording to a tape:  
• The tape's record tab is intact.  
• The videotape is long enough to  
record the DVD disc.  
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
3
CLEAR/C-RESET ZOOM  
SEARCH  
Select “Recording” using K /  
L / { / B buttons, then press  
ENTER button.  
CM SKIP  
MODE  
Recording menu will appear.  
Note for recording to a disc:  
• The DVD disc is satisfied with  
the recording status. Refer to  
pages 26-42.  
DVD  
Setup > Recording  
DVD-RW Recording Format  
Auto Chapter  
Video mode  
10 minutes  
Timer Programming  
Dubbing Mode  
VCR DVD  
1
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
4
Select “Dubbing Mode” using  
K / L buttons, then press  
ENTER button.  
Option window will appear.  
Note  
Setup > Recording  
VCR DVD  
For VCR to DVD duplication:  
Setup Menu  
DVD-RW Recording Format  
Auto Chapter  
Video mode  
OFF  
• After startingVCR to DVD  
duplication, the picture may be  
distorted because of the auto  
tracking function.  
Timer Programming  
Dubbing Mode  
VCR DVD  
This is not a malfunction. Be  
advised to playback the tape  
until the picture is stabilized,  
then set the starting point  
which you wish to start  
recording, and startVCR to  
DVD duplication.  
Instructions continue on page 40.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Dubbing Mode (cont’d)  
VCR to DVD  
DVD toVCR  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
5-a  
5-b  
.@/:  
1
ABC  
2
DEF  
3
Select “VCR ⇒ DVD” using  
K
Select “VCR ⇐ DVD” using  
K
CH  
GHI  
4
JKL  
5
MNO  
6
7-a  
7-b  
/
L buttons, then press  
/
L buttons, then press  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
ENTER button.  
ENTER button.  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
Setup > Recording  
VCR DVD  
Setup > Recording  
VCR DVD  
DVD-RW Recording Format  
Auto Chapter  
DVD-RW Recording Format  
Auto Chapter  
Video mode  
OFF  
Video mode  
OFF  
9-a  
9-b  
PLAY  
Timer Programming  
Dubbing Mode  
Timer Programming  
Dubbing Mode  
STOP  
VCRDVD
VCR DVD  
VCRDVD
VCR DVD  
6-a  
6-b  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
5-a  
5-b  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
6-a  
6-b  
Press SETUP button to exit  
SETUP menu.  
Press SETUP button to exit  
SETUP menu.  
Make sure to select a recording  
speed using REC SPEED button.  
VCR  
Press:  
VCR  
Press:  
Make sure to select a recording  
speed using REC SPEED button.  
7-a  
7-b  
DVD  
Press:  
7-a  
OPEN/CLOSE  
Press PLAY B button on the  
unit, and then press PAUSE  
button at the point you wish  
to start recording.  
REW  
F.FWD STOP/EJECT PLAY  
RECORD  
CHANNEL  
DUBBING  
SELECT  
STOP  
PLAY  
R
POWER  
7-b  
VCR  
SELECT  
DVD  
Press PLAY B button on the  
unit, and then press PAUSE  
button at the point you wish  
to start recording.  
9-a  
8-a  
8-b  
9-b  
8-a  
Press DUBBING button on  
the front of the unit.  
Note  
8-b  
VCR to DVD duplication will start.  
• When you turn off the unit  
after setting the Dubbing  
Mode to  
Press DUBBING button on  
the front of the unit.  
DVD toVCR duplication will start.  
, the  
9-a  
setting will be set to  
Press STOP C button on the  
unit or STOP C button on  
the remote control to stop  
the recording.  
automatically.  
9-b  
• Dubbing Mode is available  
only if the tape or disc is not  
copy protected.  
• You cannot change the output  
mode duringVCR to DVD or  
DVD toVCR duplication.  
Press STOP/EJECT  
ton on the unit or STOP  
button on the remote control  
to stop the recording.  
C
A but-  
C
For VCR to DVD duplication:  
• The playback sound mode is  
followed by the setting of  
VCR playback sound mode on  
page 96. Set the playback  
sound mode to which you  
wish to record to the DVD.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Finalizing the discs  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
You will need to finalize the discs  
recorded inVideo mode to play in  
other DVD players.  
Disc  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Edit  
Format  
.@/:  
1
ABC  
2
DEF  
3
Finalize  
Finalizing discs inVideo mode  
automatically creates title menus.  
Disc Protect OFF ON  
CH  
GHI  
4
JKL  
5
MNO  
6
Yes  
No  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
*VR mode only  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
PLAY  
4
STOP  
4
REC/OTR  
SETUP  
TIMER PROG.  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
ENTER  
SKIP  
REC MONITOR  
1
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
Finalizing will start.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Setup Menu  
Note  
• Once you have finalized a disc  
recorded inVideo mode, you  
cannot edit or record any-  
thing else on that disc.  
AVR mode disc can still be  
recorded and edited on this  
unit even after finalizing.  
• When you insert a DVD-RW  
disc finalized with this unit,  
“Undo Finalize” will appear  
instead of “Finalize”.  
58%  
Finalizing  
2
To cancel finalizing, press STOP  
button.  
C
Select “DISC” using { /  
B
buttons, then press ENTER  
button.  
DISC menu will appear.  
Video mode:  
Do you want to cancel?  
Yes  
No  
Disc  
Edit  
58%  
Format  
Finalizing  
Disc  
Finalize  
Disc Protect OFF ON  
Edit  
Format  
Select “Yes”, then press  
ENTER button.  
Undo Finalize  
To release the finalizing for  
the disc, select “Undo  
Finalize” at step 3.  
Finalizing is cancelled, then the  
unit will be in stop mode.  
*VR mode only  
• If  
appear when pressing  
3
STOP button, you cannot can-  
cel finalizing because the final-  
izing has been in certain  
progress.  
When selecting “No”, press  
ENTER or RETURN button,  
finalizing will be continued.  
You cannot cancel finalizing  
the DVD-R disc when it has  
been started.  
5
Select “Finalize” using K /  
buttons, then press ENTER  
button.  
L
Finalizing is complete.  
Option window will appear.  
100%  
Finalizing  
This operation may take a  
while to be completed.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Setting a disc to protect  
VR  
DVD-RW  
3
To prevent accidental recording,  
editing, or erasing the titles, you  
can protect them from DISC  
menu.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Disc Protect OFF ➔  
.@/:  
1
ABC  
2
DEF  
3
ON” using K / L buttons,  
then press ENTER button.  
Option window will appear.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
1
Disc  
DISPLAY  
VCR  
DVD  
PAUSE  
Press SETUP button to dis-  
play SETUP/DISC menu.  
SETUP/DISC menu will appear.  
Screen:  
Edit  
Format  
Finalize  
PLAY  
Disc Protect OFF ON  
STOP  
Yes  
No  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
1
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Setup Menu  
A disc will be protected.  
2
Select “DISC” using { /  
B
buttons, then press ENTER  
button.  
DISC menu will appear.  
58%  
Writing to Disc  
Disc  
Edit  
Format  
This operation may take a  
while to be completed.  
Finalize  
Disc Protect OFF ON  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Information on DVD play  
Before you attempt to play DVD discs, read the following information.  
Playable discs  
Region codes  
This unit is compatible to play the following discs.  
To play a DVD, make sure that it meets the require-  
ments for Region Codes and Color Systems as  
described below. Discs that have the following logos  
will play on the unit. Other Disc types are not guar-  
anteed to play.  
This unit has been designed to play DVD discs with  
Region One (1). DVDs must be labeled for ALL  
regions or for Region 1 in order to play on this unit.  
You cannot play DVDs that are labeled for other  
regions. Look for the symbols below on your DVDs.  
If these region symbols do not appear on your  
DVD, you cannot play that DVD in this unit.  
Disc  
Logo  
DVDVIDEO  
The number inside the globe refers to region of the  
world. Region 1 represents the United States,  
Canada, Bermuda, the U.S.Virgin Islands, and small  
regions near Australia.  
DVD-RW (VIDEO/VR FORMAT)  
DVD-R (VIDEO FORMAT)  
A DVD labeled for a specific region can only play on  
the unit with the same region code.  
CD-DA (AUDIO CD)  
Hint for DVD playback  
The contents of DVD disc are generally divided into  
some titles.Titles may be further subdivided into  
chapters.  
CD-R (CD-DA FORMAT, MP3 files)  
CD-RW (CD-DA FORMAT, MP3 files)  
Color systems  
Start Rec.  
Stop/Start  
Stop Rec.  
DVDs are recorded in different color systems  
throughout the world.The most common color sys-  
tems are NTSC (which is used primarily in the  
United States and Canada), PAL, and SECAM.  
This unit uses NTSC, so DVDs you play must be  
recorded in the NTSC system.You cannot play  
DVDs recorded in other color systems.  
Title 1  
Title 2  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2  
Guide to displays  
DVD  
1. Indicates a disc type and a  
First:  
: Search  
format mode.  
: Audio  
2. Indicates a recording speed  
and possible recording time.  
3. Indicates a current channel  
number.  
4. Indicates a title number, chap-  
ter number, and the time  
elapsed of disc play.  
Press DISPLAY button to call up  
the display menu.This menu will  
give you the information on the  
playing disc. Some operations are  
available while disc is playing.  
: Subtitle  
: Angle (exceptVR mode)  
: Repeat  
: Marker  
4
1
: Noise Reduction  
: Zoom  
DVD-RW  
1
1
00:00:00  
5. Each icon means:  
Video mode  
SP 1:25 Rem.  
CH 1  
2
3
5
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Basic playback  
Playback  
VR mode:  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-R  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Original  
2
6
1
6
.@/:  
1
ABC  
2
DEF  
3
1
2  
3
1
CH  
GHI  
4
JKL  
5
MNO  
6
JAN/1 12:00AM  
4
JAN/1 1:00AM  
5
JAN/1 2:00AM  
Press POWER button, then  
press DVD button.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
When you are playing a DVD, turn  
the TV on and be sure to select  
the input to which the unit is con-  
nected.  
JAN/1 3:00AM  
JAN/1 4:00AM  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
MENU / LIST button  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
Playlist  
ENTER  
SKIP  
REC MONITOR  
1
12  
3
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
5
4
4
JAN/1 12:00AM  
4
JAN/1 1:00AM  
5
JAN/1 2:00AM  
Press OPEN/CLOSE A but-  
ton to open the disc tray.  
The disc tray will open.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
JAN/1 3:00AM  
JAN/1 4:00AM  
3
Place the disc onto the disc  
tray with its label facing up  
and make sure to align the  
disc to the disc tray guide.  
5
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
Playback will start.  
6
disc  
tray  
guide  
Press STOP C button to stop  
playback.  
Note  
• For DVD-R (Video mode)  
To eject the disc, press  
and DVD-RW (Video mode)  
discs which are already final-  
ized, a title list will be dis-  
played instead of thumbnails.  
This operation may take a  
while to be recognized.  
OPEN/CLOSE A button to open  
the disc tray, then remove the disc  
before turning the unit off.  
4
PressTOP MENU button to  
display the title menu.  
You can change “Original” or  
“Playlist” of VR mode using  
MENU / LIST button.  
Title Menu  
1
2
3
4
5
6
7
8
JAN/1 12:24AM CH96 XP  
Video mode:  
Title List  
1
12  
3
• You can resume play from  
where you stopped playing  
the disc. (Resume play)  
Refer to page 46 for details  
about resume play.  
JAN/1 12:00AM  
4
JAN/1 1:00AM  
5
JAN/1 2:00AM  
JAN/1 3:00AM  
JAN/1 4:00AM  
• Some discs may start playing  
automatically.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Basic playback (cont’d)  
DVD-V  
CD  
MP3  
4
Press PLAY B button to start  
playing.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
2
1
.@/:  
1
ABC  
2
DEF  
3
Press POWER button, then  
press DVD button.  
Playback will start.  
CH  
GHI  
4
JKL  
5
MNO  
6
When you are playing a DVD or  
an audio CD, turn the TV on and  
be sure to select the input to  
which the unit is connected.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
If you are playing a DVD-Video  
disc, a menu may appear.  
Refer to pages 46-47 for details  
about a disc menu.  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
4
5
STOP  
2
5
Press OPEN/CLOSE A but-  
ton to open the disc tray.  
The disc tray will open.  
REC/OTR  
SETUP  
TIMER PROG.  
Press STOP C button to stop  
ENTER  
SKIP  
REC MONITOR  
playing.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
3
CM SKIP  
MODE  
Place the disc onto the disc  
tray with its label facing up  
and make sure to align the  
disc to the disc tray guide.  
Note  
• Some discs may start playing  
automatically.  
For MP3 playback  
• Press s button or RETURN  
button to go to the previous  
hierarchy.  
• Press STOP C button to return  
to the first item.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
.@/:  
1
ABC  
2
DEF  
3
In stop mode, pressTOP MENU  
button to call up the MP3 menu.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
List of MP3 Files  
DISC NAME  
SPACE  
0
Hints for MP3 files:  
DISPLAY  
VCR  
DVD  
PAUSE  
• Folders are known as Groups,  
files are known as Tracks.  
FOLDER NAME 1  
FOLDER NAME 2  
FOLDER NAME 3  
FOLDER NAME 4  
FOLDER NAME 5  
FOLDER NAME 6  
PLAY  
•
Folders are accompanied by  
icon.  
STOP  
2
2
2
REC/OTR  
SETUP  
TIMER PROG.  
1
2
FILE NAME 1  
FILE NAME 2  
•
MP3 files are accompanied by  
icon.  
1/2  
Reproduction will start from the  
selected track and go to the  
next one in turn.  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
• To exit the menu, press TOP  
MENU button again.  
CLEAR/C-RESET ZOOM  
SEARCH  
1
•
•
The system can recognize up to 255  
groups (or folders) and up to 255 tracks.  
The name of the group and track  
can be displayed in up to 32 char-  
acters. Unrecognizable characters  
will be replaced with asterisks.  
CM SKIP  
MODE  
2
K
L
Press  
/
buttons to select a  
Note  
desired folder (group) or track,  
then press ENTER button.  
• The audio source of MP3 files  
cannot be recorded as digital  
sound by an MD or DAT deck.  
• Files whole extension other  
than “.mp3 (MP3)” will not be  
listed in the MP3 menu.  
• Some unplayable folders or  
tracks may be listed in the  
MP3 menu due to the  
• If there are no files in the folder,  
“No Files” will be displayed.  
When selecting track:  
Playback will start.  
This unit recommends the files  
recorded under the following cir-  
cumstances:  
•
•
When selecting the folder:  
The files in the folder will appear.  
Press K or L button to select the  
track or folder you want, then  
press ENTER button.  
Sampling frequency: 44.1kHz or 48kHz.  
Constant bit rate: 112kbps - 320kbps.  
recording status.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Basic playback (cont’d)  
Playing discs using the disc menu  
DVD-V  
2
A DVD disc contains a disc menu  
that describes the contents or  
allows you to customize the play-  
back. For example, the menu may  
offer choices for subtitle lan-  
guages, special features, or chapter  
selection.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select an item using K / L /  
{ / B buttons, then press  
ENTER button to confirm.  
Continue this step to set up all  
the features you want or to start  
playing the disc from the menu.  
.@/:  
1
ABC  
2
DEF  
3
2
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
Sometimes these are displayed  
automatically when you start play-  
back, otherwise only appear when  
you press MENU / LIST button.  
MENU / LIST button:  
PLAY  
Displays a DVD disc menu which  
varies with the disc and may be  
the same as the ‘Title menu.’  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
2
3
DVD  
ENTER  
SKIP  
REC MONITOR  
First:  
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
K / L / { / B buttons:  
Moves the cursor around screen.  
CLEAR/C-RESET ZOOM  
SEARCH  
1
CM SKIP  
MODE  
Press MENU / LIST button.  
The DVD main menu will appear.  
Enter button:  
Selects the currently highlighted  
menu option.  
If the feature is not available,  
may appear on the TV screen.  
Number buttons:  
Selects a numbered menu option  
(some discs only). Press ENTER  
button after.  
3
Press MENU / LIST button to  
exit the menu.  
Note  
• Menus vary among discs.  
Refer to the information  
accompanying the disc for  
details.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Basic playback (cont’d)  
Playing discs using the title menu  
DVD-V  
2
Some DVDs have a title menu,  
which lists the titles available on  
them. It helps you to start play-  
back at a specific title.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a title to play using the  
.@/:  
1
ABC  
2
DEF  
3
K / L / { / B buttons, then  
press ENTER button.  
Playback will begin at the title you  
selected.  
CH  
GHI  
4
JKL  
5
MNO  
6
2
DVD  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
First:  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
TOP MENU button:  
Displays the ‘Title menu’ of a  
DVD disc which varies with the  
disc.  
PressTOP MENU button.  
PLAY  
The title menu will appear.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
If the feature is not available,  
may appear on the TV screen.  
2
K / L / { / B buttons:  
MENU/LIST TOP MENU  
RETURN  
SKIP  
1
2
3
Moves the cursor around screen.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Enter button:  
Selects the current highlighted  
menu option.  
Number buttons:  
Selects a numbered menu option  
(some discs only). Press ENTER  
button after.  
3
PressTOP MENU button to  
exit the title menu.  
Note  
• The TOP MENU button will  
not always be active with all  
DVDs.  
• Menus vary among discs.  
Refer to the information  
accompanying the disc for  
details.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback  
Resume play  
Video  
DVD-RW  
DVD-V  
VR  
DVD-R  
OPEN/CLOSE  
POWER  
2
REC SPEED AUDIO  
CD  
MP3  
DVD-RW  
Press PLAY B button.  
In a few seconds, playback will  
resume from the point at which it  
stopped last.You can resume play  
at the same point even if you turn  
off the unit.  
.@/:  
1
ABC  
2
DEF  
3
You can resume play from where  
you stopped playing the disc last.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
1
DISPLAY  
VCR  
DVD  
PAUSE  
During playback, press STOP  
PLAY  
2
1
2
C button.  
The resume message will appear.  
Screen:  
To cancel the resume play and  
start playing the disc from the  
beginning, press STOP C button  
the second time while the play-  
back is stopped.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Note  
Resume ON  
• For MP3 files, playback will  
resume from the beginning of  
the track at which playback  
was stopped.  
Fast forward / Fast reverse  
Video  
VR  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
DVD-V  
DVD-R  
CD  
MP3  
DVD-RW  
DVD-RW  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
1
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
During playback, press D or E button.  
SPACE  
0
Every time you press D or E button, approximate speed will be  
DISPLAY  
VCR  
DVD  
PAUSE  
changed as follows.  
PLAY  
1
1
g
h
g
h
g
h
g
h
g
h
g
h
STOP  
1
Normal  
speed  
REC/OTR  
SETUP  
TIMER PROG.  
RETURN  
x40  
x20  
x5  
x2  
x20  
x40  
playback  
ENTER  
REC MONITOR  
MENU/LIST TOP MENU  
For Audio CDs, approximate speed is fixed at x8 with sound.  
For MP3 files, approximate speed is fixed at x8.  
To return to the normal playback, press PLAY B button.  
Note  
• Forward/reverse speed will be  
indicated with icons as fol-  
lows.  
Forward (Approx. Speed)  
x2:  
x20:  
x40:  
Reverse (Approx. Speed)  
x5:  
x20:  
x40:  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback (cont’d)  
SkippingTV commercials during play  
Video  
DVD-RW  
VR  
DVD-RW  
e.g. Press CM SKIP button once  
DVD-R  
7
8
9
SPACE  
0
SLOW  
You can skip TV commercials by  
pressing CM SKIP button, so that  
you can enjoy the recorded pro-  
grams without interrupting.  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
CM Skip  
30 sec.  
ENTER  
SKIP  
REC MONITOR  
1
MENU/LIST TOP MENU  
RETURN  
SKIP  
During playback, press CM  
SKIP button.  
CLEAR/C-RESET ZOOM  
SEARCH  
(forwarding 30 seconds.)  
CM SKIP  
MODE  
Normal playback will start at 30  
seconds ahead from the point you  
press CM SKIP button.  
Every time you press CM SKIP  
button, the searching point will be  
extended by 30 seconds ahead.  
You can press up to 6 times (180  
seconds).  
1
B
Playback will restart automatically.  
Pause  
Video  
DVD-RW  
DVD-V  
VR  
DVD-R  
CD  
2
MP3  
DVD-RW  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Press PLAY B button to  
.@/:  
1
resume play.  
ABC  
2
DEF  
3
1
CH  
GHI  
4
JKL  
5
MNO  
6
During playback, press  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
PAUSE F button.  
Playback will pause and sound will  
be muted.  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
PLAY  
2
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback (cont’d)  
Step by step playback  
Video  
DVD-V  
VR  
DVD-R  
DVD-RW  
SPACE  
0
SLOW  
2
DISPLAY  
VCR  
DVD  
PAUSE  
DVD-RW  
1
3
Press SKIP G button  
repeatedly.  
PLAY  
1
STOP  
The playback will advance one  
frame (or step) at a time when  
you press the skip button with  
the sound muted.  
During playback, press  
REC/OTR  
SETUP  
TIMER PROG.  
PAUSE F button.  
Playback will pause and sound will  
be muted.  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
2
To play step by step back-  
ward:  
CM SKIP  
MODE  
Press SKIP H button repeatedly.  
Every time you press the button,  
the playback will go backward by  
one frame.  
3
Press PLAY B button to  
resume play.  
Slow forward / Slow reverse play  
Video  
DVD-RW  
VR  
DVD-RW  
DVD-V  
DVD-R  
1
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
During playback, press PAUSE k button, then press D or  
E
.@/:  
1
ABC  
2
DEF  
3
button.  
CH  
GHI  
4
JKL  
5
MNO  
6
Every time you press D or E button, approximate speed will be  
changed as follows.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
g
h
g
h
g
h
g
h
g
h
g
h
1
1
1
Pause  
x1/4  
x1/8  
x1/16  
x1/16  
x1/8  
x1/2  
PLAY  
STOP  
1
REC/OTR  
SETUP  
TIMER PROG.  
RETURN  
To return to the normal playback, press PLAY B button.  
ENTER  
REC MONITOR  
MENU/LIST TOP MENU  
Note  
• Forward/reverse speed will be  
indicated with icons as fol-  
lows.  
Forward (Approx. Speed)  
x1/16:  
x1/8:  
x1/2:  
Reverse (Approx. Speed)  
x1/16:  
x1/8:  
x1/4:  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Special playback (cont’d)  
Zoom  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
Video  
DVD-RW  
DVD-V  
DVD-R  
ENTER  
SKIP  
REC MONITOR  
2
2
3
VR  
DVD-RW  
MENU/LIST TOP MENU  
RETURN  
SKIP  
Select a desired zoom factor  
to zoom using { / B buttons,  
then press ENTER button.  
The zoom area will be displayed.  
CLEAR/C-RESET ZOOM  
SEARCH  
1
CM SKIP  
MODE  
1
During playback, press  
ZOOM button.  
Zoom menu will appear.  
Screen:  
DVD-Video  
1
1
01:23:45  
x1.2  
x1.5  
x2.0  
Note  
• When selecting a smaller factor  
than the current one, the zoom  
area will not be displayed.  
• To remove the zoom menu, press  
ZOOM button again at step 1.  
• To cancel the zoom function,  
select x1.0 using { / B buttons,  
then press ENTER button.  
3
B
Select a desired zoom position  
There are four options  
using K / L / { / B buttons, then  
press ENTER button.  
The zoom play will start.  
(x1.0,x1.2,x1.5 and x2.0), these  
are displayed excluding the cur-  
rent zoom rate.  
Marker Setup  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Video  
DVD-RW  
Screen for DVD:  
.@/:  
1
ABC  
2
DEF  
3
DVD-V  
VR  
DVD-R  
CH  
GHI  
4
JKL  
5
MNO  
6
DVD-Video  
1
1
01:23:45  
CD  
DVD-RW  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
2
3
4
5
6
This feature allows you to assign  
a specific point on a disc to be  
called back later.  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
PLAY  
1
STOP  
During playback, press DIS-  
PLAY button.  
REC/OTR  
SETUP  
TIMER PROG.  
Screen for CD:  
ENTER  
SKIP  
REC MONITOR  
2
3
4
The display menu will appear.  
Screen:  
MENU/LIST TOP MENU  
RETURN  
SKIP  
Audio CD  
1
01:23:45  
CLEAR/C-RESET ZOOM  
SEARCH  
1
2
3
4
5
6
CM SKIP  
MODE  
DVD-Video  
1
1
01:23:45  
Note  
• To clear a marker, select the  
marker number to be cleared,  
then press CLEAR/C-RESET  
button.  
• All markers will be erased  
when you operate these opera-  
tions listed below.  
– Opening the disc tray.  
– Turning off the power.  
– Recording to a recordable  
disc.  
3
Select a desired marker num-  
ber using { / B buttons.  
2
When it reaches the desired  
point, press ENTER button.  
Select  
icon using { /  
B
buttons, then press ENTER  
button.  
Marker setup menu will appear.  
4
To return to the marker later,  
select the desired marker  
number using { / B buttons,  
then press ENTER button.  
–
Changing the mode between  
Original and Playlist.(VR mode)  
•You can mark up to 6 points.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Search  
Title/Chapter search  
Video  
DVD-RW  
DVD-V  
VR  
DVD-R  
DVD-RW  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Using SKIP H / G buttons  
Using DISPLAY button  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
1
1
2
1
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
During playback, press SKIP  
During playback, press DIS-  
PLAY button.  
SPACE  
0
G button to skip the cur-  
rent title or chapter and  
move to the next.  
The title or chapter will move  
forward one at a time.  
DISPLAY  
VCR  
DVD  
PAUSE  
The display menu will appear.  
Screen:  
PLAY  
STOP  
DVD-Video  
1
1
01:23:45  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
To go back to the previous title  
2
1
MENU/LIST TOP MENU  
RETURN  
SKIP  
or chapter, press SKIP H but-  
ton.The title or chapter will move  
backward one title at a time.  
CLEAR/C-RESET ZOOM  
SEARCH  
2
Select  
CM SKIP  
MODE  
icon using { /  
B
buttons, then press ENTER  
button.  
‘T’ for title will be highlighted.  
Title:  
Enter a desired title number  
to search using K / L buttons  
or number buttons, then  
press ENTER button.  
Title search will start.  
Chapter:  
To move to ‘C’ for chapter, press  
B button.  
Enter a desired chapter num-  
ber to search using K / L but-  
tons or number buttons, then  
press ENTER button.  
Chapter search will start.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Search (cont’d)  
Track search  
CD  
MP3  
Using SKIP H / G buttons  
Using DISPLAY button  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
.@/:  
1
ABC  
2
DEF  
3
1
During playback, press SKIP  
CH  
GHI  
4
JKL  
5
MNO  
6
During playback, press DIS-  
PLAY button.  
G button to skip the cur-  
rent track and move to the  
next.  
The track will move forward one  
track at a time.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
The display menu will appear.  
Screen:  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
Audio CD  
1
01:23:45  
PLAY  
STOP  
To go back to the previous track,  
REC/OTR  
SETUP  
TIMER PROG.  
2
3
1
ENTER  
SKIP  
press SKIP H button.The track  
will move backward by one at a  
time.  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
2
Select  
CLEAR/C-RESET ZOOM  
SEARCH  
icon using { /  
B
CM SKIP  
MODE  
buttons, then press ENTER  
button.  
‘T’ for track will be highlighted.  
3
Enter a desired track number  
to search using K / L buttons  
or number buttons, then  
press ENTER button.  
Track search will start.  
Time search  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Video  
DVD-RW  
DVD-V  
VR  
DVD-R  
CD  
.@/:  
1
ABC  
2
DEF  
3
2
CH  
GHI  
4
JKL  
5
MNO  
6
DVD-RW  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Select  
icon using { /  
B
1
buttons, then press ENTER  
button.  
‘T’ for title or track will be high-  
lighted.  
SPACE  
0
During playback, press DIS-  
PLAY button.  
DISPLAY  
VCR  
DVD  
PAUSE  
1
PLAY  
The display menu will appear.  
Screen for DVD:  
STOP  
To move to the clock icon, press  
REC/OTR  
SETUP  
TIMER PROG.  
B button.  
DVD-Video  
1
1
01:23:45  
ENTER  
SKIP  
REC MONITOR  
2
3
MENU/LIST TOP MENU  
RETURN  
SKIP  
3
CLEAR/C-RESET ZOOM  
SEARCH  
Enter a desired time to  
CM SKIP  
MODE  
Screen for CD:  
search using K / L buttons or  
number buttons, then press  
ENTER button.  
Note  
Audio CD  
1
01:23:45  
• Time search function is avail-  
able only in the same track or  
title.  
Time search will start.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Repeat/Random/Program play  
Repeat play  
OPEN/CLOSE  
POWER  
Video  
DVD-RW  
REC SPEED AUDIO  
Title:  
DVD-V  
VR  
DVD-R  
CD  
The current title will be played  
repeatedly. (DVD only)  
.@/:  
1
ABC  
2
DEF  
3
MP3  
DVD-RW  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Chapter:  
The current chapter will be played  
repeatedly. (DVD only)  
1
SPACE  
0
During playback, press DIS-  
PLAY button.  
DISPLAY  
VCR  
DVD  
PAUSE  
The display menu will appear.  
1
PLAY  
All:  
DVD-Video  
1
1
01:23:45  
STOP  
The current disc will be played  
repeatedly. CD, MP3 and DVD-  
RW (VR mode only)  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
3
MENU/LIST TOP MENU  
RETURN  
SKIP  
A-B:  
CLEAR/C-RESET ZOOM  
SEARCH  
The A-B point will be played  
repeatedly.  
CM SKIP  
MODE  
2
Select  
icon using  
{
/
B
but-  
tons, then press ENTER button.  
When pressing ENTER button  
while A-B is highlighted, the start-  
ing point (A) will be decided.  
Repeat menu will appear.  
Screen:  
Press ENTER button again to  
select the ending point (B).  
DVD-Video  
1
1
01:23:45  
OFF  
Title  
Chapter  
A-B  
Note  
Track:  
• The A-B Repeat playback can  
only be set within the current  
title (for DVDs), or current  
track (for Audio CDs).  
• To cancel the repeat playback,  
select OFF at step 2.  
• You cannot select “Group”  
during the random playback  
of MP3 files.  
The current track will be played  
repeatedly. (CD, MP3 only)  
Group:  
3
The current group will be played  
repeatedly. (MP3 only)  
Select a desired option to  
repeat using K / L buttons,  
then press ENTER button.  
The selected repeat play will start.  
Random play  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
CD  
MP3  
SPACE  
0
With this function, you can play a  
disc randomly instead of playing it  
in the original order.  
2
Select “CD” using { / B but-  
tons, then press ENTER but-  
ton.  
DISPLAY  
VCR  
DVD  
PAUSE  
DVD  
First:  
PLAY  
CD Playback Mode menu will  
STOP  
appear.  
REC/OTR  
SETUP  
TIMER PROG.  
1
1
ENTER  
SKIP  
REC MONITOR  
Press SETUP button to dis-  
play SETUP/CD menu.  
SETUP/CD menu will appear.  
CD Playback Mode  
MENU/LIST TOP MENU  
RETURN  
SKIP  
2
3
Random Play  
Program Play  
CLEAR/C-RESET ZOOM  
SEARCH  
Screen:  
CM SKIP  
MODE  
3
Note  
Select “Random Play” using  
K / L buttons, then press  
ENTER button.  
• To cancel random playback,  
press STOP C button twice  
during random playback.  
Random playback will start.  
Setup Menu  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Repeat/Random/Program play (cont’d)  
Program play  
CD  
3
You can program the disc to play  
in your desired order.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Program Play” using  
DVD  
.@/:  
1
ABC  
2
DEF  
3
K / L buttons, then press  
ENTER button.  
Program play list will appear.  
First:  
CH  
GHI  
4
JKL  
5
MNO  
6
4
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
SPACE  
0
CD Playback Mode > Program Play  
Press SETUP button to dis-  
play SETUP/CD menu.  
SETUP/CD menu will appear.  
Screen:  
DISPLAY  
VCR  
DVD  
PAUSE  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
PLAY  
5
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
SKIP  
REC MONITOR  
Total  
00:00:00  
MENU/LIST TOP MENU  
RETURN  
SKIP  
2
3
4
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
Select a desired track using  
L buttons, then press  
K
Setup Menu  
/
ENTER button or B button.  
A cursor will move to the next.  
2
CD Playback Mode > Program Play  
Select “CD” using { / B but-  
tons, then press ENTER but-  
ton.  
07 - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
- - - - - - - - - - - - - - - - - - - -  
CD Playback Mode menu will  
appear.  
Total  
00:04:30  
CD Playback Mode  
Random Play  
Program Play  
5
Press PLAY B button to start  
program playback.  
Program playback will start.  
Note  
• To erase tracks you selected,  
press CLEAR/C-RESET but-  
ton.  
• You can make program set-  
tings up to 50.  
• To cancel program playback,  
press STOP C button twice  
during program playback.  
• You may also select a desired  
track using Number buttons  
at step 4.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Selecting the format of audio and video  
You can select an audio or video format as you prefer depending on  
the contents of the disc you are playing.  
Switching audio soundtrack  
VR  
DVD-V  
DVD-RW  
<DVD-RWVR mode>  
When playing a DVD-Video disc  
recorded with two or more  
soundtracks (these are often in  
different languages), you can  
switch between them anytime  
during playback.  
On DVD-RW discs recorded in  
VR mode, you can switch to main  
(L), sub audio (R) or a mix of  
both (L/R).  
DVD-RW  
VR Original  
1
1
00:00:00  
1 Dolby Digital Dual L/R  
2 Dolby Digital 2ch ----  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
3
PLAY  
Select a desired audio sound-  
1
STOP  
track using K / L buttons,  
then press ENTER button.  
<DVD-Video>  
Audio soundtrack will switch.  
<DVD-RWVR mode>  
REC/OTR  
SETUP  
TIMER PROG.  
During playback, press DIS-  
PLAY button.  
ENTER  
SKIP  
REC MONITOR  
The display menu will appear.  
Screen:  
MENU/LIST TOP MENU  
RETURN  
SKIP  
2
3
4
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
DVD-Video  
1
1
01:23:45  
DVD-RW  
VR Original  
1
1
00:00:00  
1 Dolby Digital Dual  
2 Dolby Digital 2ch  
L/R  
L
R
2
4
Select  
icon using { /  
B
Select a desired audio chan-  
buttons, then press ENTER  
button.  
Audio menu will appear.  
<DVD-Video>  
nel using K / L buttons, then  
press ENTER button.  
Audio channel will switch.  
Note  
•
•
•
Some discs will only allow  
you to change the sound-  
track from the disc’s menu.  
Press TOP MENU button or  
MENU / LIST button to dis-  
play the disc’s menu.  
On DVD-RW discs recorded  
inVR mode that may have  
both a main and a sub audio  
channel, you can switch to  
main (L), sub audio (R), or a  
mix of both (L/R).  
This unit CANNOT record  
in both stereo and SAP  
(Secondary Audio Program)  
at the same time.  
DVD-Video  
1
1
00:00:00  
1 Dolby Digital 5.1ch English  
2 Dolby Digital 2ch Japanese  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Selecting the format of audio and video (cont’d)  
CD  
MP3  
2
When playing Audio CDs or MP3  
files you can switch between  
stereo, just the left channel or  
just the right channel.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select  
icon using { /  
B
.@/:  
1
ABC  
2
DEF  
3
buttons, then press ENTER  
button.  
Audio menu will appear.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
1
DISPLAY  
VCR  
DVD  
PAUSE  
During playback, press DIS-  
PLAY button.  
1
3
PLAY  
Select a desired audio chan-  
The display menu will appear.  
Screen:  
STOP  
nel using K / L buttons, then  
press ENTER button.  
Audio channel will switch.  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
Audio CD  
1
00:00:00  
MENU/LIST TOP MENU  
RETURN  
SKIP  
2
3
Audio CD  
1
00:00:00  
CLEAR/C-RESET ZOOM  
SEARCH  
L/R  
L
CM SKIP  
MODE  
R
Switching subtitles  
VR  
DVD-V  
DVD-RW  
2
Many DVDVideo discs have subti-  
tles in one or more languages.  
The case usually tells you which  
subtitle languages are available.  
You can switch subtitle languages  
anytime during playback.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select  
icon using { /  
B
.@/:  
1
buttons, then press ENTER  
button.  
Subtitle menu will appear.  
ABC  
2
DEF  
3
1
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DVD-Video  
1
1
00:00:00  
DISPLAY  
VCR  
DVD  
PAUSE  
1
OFF  
1English  
2Japanese  
During playback, press DIS-  
PLAY button.  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
The display menu will appear.  
Screen:  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
2
3
DVD-Video  
1
1
01:23:45  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
3
Select a desired subtitle lan-  
guage using K / L buttons,  
then press ENTER button.  
Subtitle will be displayed in the  
selected language.  
Note  
• Some discs will only allow  
you to change the subtitle  
from the disc’s menu. Press  
TOP MENU button or MENU  
/ LIST button to display the  
disc’s menu.  
When selecting “OFF,” subtitle will  
disappear.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs  
Selecting the format of audio and video (cont’d)  
Switching camera angles  
DVD-V  
2
Some DVDVideo discs feature  
scenes shot from two or more  
angles, check the case for details:  
it should be marked with an angle  
icon if it contains multi-angle  
scenes.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select  
icon using { /  
B
.@/:  
1
ABC  
2
DEF  
3
buttons, then press ENTER  
button.  
Angle will switch each time you  
press ENTER button.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
1
During playback, press DIS-  
PLAY button.  
PLAY  
STOP  
The display menu will appear.  
Screen:  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
DVD-Video  
1
1
01:23:45  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Angle icon appears when a switch-  
ing camera angle is available.  
Reducing block noise  
Video  
DVD-V  
VR  
DVD-R  
DVD-RW  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
DVD-Video  
1
1
00:00:00  
.@/:  
1
ABC  
2
DEF  
3
DVD-RW  
OFF  
Type 1  
Type 2  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
SPACE  
0
During playback, press DIS-  
PLAY button.  
DISPLAY  
VCR  
DVD  
PAUSE  
1
The display menu will appear.  
Screen:  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
3
DVD-Video  
1
1
01:23:45  
ENTER  
SKIP  
REC MONITOR  
Select a desired option using  
2
3
MENU/LIST TOP MENU  
RETURN  
SKIP  
K / L buttons, then press  
ENTER button.  
Your setting will be activated.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
This function reduces noise in the  
playback picture.When playing  
back discs recorded in long time  
mode such as SLP or SEP mode,  
select "Type 1" or "Type 2".  
("Type 2" is more effective.)  
When playing back discs with a  
few noises such as DVD-Video  
discs, select "OFF".  
2
Select  
icon using { /  
B
buttons, then press ENTER  
button.  
NR menu will appear.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Information on disc editing  
Guide to a title list  
Editing discs inVideo mode  
Title list allows you to check the titles recorded on  
the disc easily.You can choose a title to play from this  
screen and easily edit the titles as you prefer.  
You can edit discs inVideo mode for the following items.  
Be sure that once you edit titles, they will not remain as  
recorded originally.  
• Deleting titles (Refer to page 61)  
• Putting names on titles (Refer to pages 62-63)  
• Setting or clearing chapter markers (Refer to page 64)  
Disc > Edit > Original  
1
2  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
6
Note  
•
Once a disc is finalized, editing the disc or  
recording to the disc will not be available.  
(Except DVD-RW discs inVR mode.)  
A playlist is not available with the DVD-R discs  
and DVD-RW discs inVideo mode.  
JAN/1 6:00AM  
JAN/1 4:00AM  
JAN/1 5:00AM  
1
2
7
•
Disc > Edit > Original  
Title Delete  
Scene Delete  
1
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
JAN/1 1:00AM CH12 XP  
0:01:25  
8 3  
6
5
4
1. Titles recorded on the disc can be selected to  
edit by pressing ENTER button with the cursor  
on the title.  
2. Protect icon, which appears when the title has  
been protected.  
3. The selected title thumbnails from the title list.  
4. The menus in here for editing titles as you pre-  
fer. The available menus depends on the disc  
type and the format type.  
5. The details of the title, which can be changed to  
the title name you will edit.  
6. Time status bar of the title.  
7. The arrow icon, which means the title list  
includes a next or a previous page. Press B or  
{ button by following direction of the icon.  
8. Playback status of the current disc.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Information on disc editing (cont’d)  
Editing discs inVR mode  
For discs inVR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the  
original.  
Editing original titles  
The following items can be used to edit the original  
titles.  
• Deleting titles (Refer to page 65)  
• Deleting parts of titles (Refer to pages 66-67)  
• Putting names on titles (Refer to pages 67-68)  
• Setting or clearing chapter markers (Refer to  
pages 69-70)  
Editing playlists  
You can create a playlist from original titles, so that  
you can edit as you prefer without losing original  
titles.  
The following items you can edit with a playlist.  
• Deleting titles (Refer to page 74)  
• Deleting parts of titles (Refer to pages 75-76)  
• Putting names on titles (Refer to pages 76-77)  
• Setting or clearing chapter markers (Refer to  
pages 78-79)  
• Setting pictures for thumbnails (Refer to pages  
70-71)  
• Setting titles to protect (Refer to page 72)  
• Releasing titles from protecting (Refer to page 73)  
• Setting pictures for thumbnails (Refer to pages  
79-80)  
• Adding titles to a playlist (Refer to page 81)  
• Deleting a playlist (Refer to page 82)  
Note  
•
Original titles once edited will not remain as recorded originally.When you want to leave the original as  
it is, edit the playlist as you prefer. (Refer to pages 74-82)  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVideo mode  
Deleting titles  
Video  
DVD-RW  
3
You can delete titles which you  
do not need anymore.  
Be sure to know that the titles  
once deleted cannot be brought  
back to the disc.  
When the last title in the title list  
inVideo mode is deleted, the disc  
space to record will be increased.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
Edit menu will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
Disc > Edit  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
Edit Title Name  
Chapter Mark  
DVD  
PLAY  
First:  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
6
JAN/ 1 1:00AM CH12 XP  
1
ENTER  
SKIP  
REC MONITOR  
0:01:25  
1
2
3
4
5
Press SETUP button. Select  
MENU/LIST TOP MENU  
RETURN  
SKIP  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
Select “Title Delete” using  
K
Disc  
/
L buttons, then press  
Edit  
ENTER button.  
Format  
Finalize  
Option window will appear.  
Disc > Edit  
Title Delete  
1
Edit Title Name  
Chapter Mark  
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
2
0:01:25  
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
5
Titlelist will appear.  
Screen:  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Disc > Edit  
1
12  
3
Title will be deleted.  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Disc > Edit  
Title Delete  
1
Edit Title Name  
Chapter Mark  
JAN/1 4:00AM  
JAN/1 5:00AM  
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
This operation may take a  
while to be completed.  
6
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVideo mode (cont’d)  
Putting names on titles  
Video  
DVD-RW  
4
You can put title names on the  
titles and change the names from  
this menu.  
The names you put on the titles  
will be displayed on a titlelist.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “EditTitle Name”  
.@/:  
1
ABC  
2
DEF  
3
using K / L buttons, then  
press ENTER button.  
A window for entering a title  
name will appear.  
5
1
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
DVD  
First:  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
Disc > Edit > Edit Title Name  
A B C  
1
1
PLAY  
a b c  
1 2 3  
@ ! ?  
Press SETUP button. Select  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
ENTER  
SKIP  
REC MONITOR  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
1
2
3
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
Disc  
CM SKIP  
MODE  
Edit  
Format  
Finalize  
5
To enter a title name, follow  
the steps of "Guide to edit  
title name" on this page.  
character set  
Disc > Edit > Edit Title Name  
A B C  
1
2
[
]
Guide to edit title name  
a b c  
1 2 3  
@ ! ?  
[
[
]
Step1 : Select a desired character set using  
K
L
Select “Edit” using K / L but-  
tons, then press ENTER button.  
Titlelist will appear.  
/
buttons, then press  
ENTER button.  
A B C  
a b c  
1 2 3  
@ ! ?  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
Screen:  
]
Step2 : Press Number buttons following by the list  
below.  
Select  
ABC  
abc  
123  
@ ! ?  
Disc > Edit  
Press  
area for entering title names  
<space>  
<space>  
0
<space>  
0
1
12  
3
” # $ %  
& ‘ ( ) *  
+ , - . / : ;  
< = > ?  
@ [ ] ^  
_ { | } !  
When you finish entering a title  
name, press ENTER button.  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
1
1
2
3
4
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
JAN/1 4:00AM  
JAN/1 5:00AM  
GHI  
ghi  
JKL  
jkl  
5
6
MNO  
PQRS  
TUV  
WXYZ  
mno  
pqrs  
tuv  
7
8
3
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
wxyz  
9
1
* Press  
button, character set will be changed  
!?  
to the " @ " mode automatically.  
Edit menu will appear.  
・To delete letters, press CLEAR/C-RESET button  
repeatedly. Holding CLEAR/C-CRESET button  
to delete all letters.  
・To go on to the next entering area for letters,  
Disc > Edit  
B
　press  
button.  
・You can enter up to 30 letters.  
Title Delete  
1
Edit Title Name  
Chapter Mark  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVideo mode (cont’d)  
6
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
The name you entered will be  
activated for the title.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
Disc > Edit > Edit Title Name  
A B C  
a b c  
1 2 3  
@ ! ?  
1
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
7
Yes  
No  
ENTER  
SKIP  
REC MONITOR  
abc  
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
Writing to Disc  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
This operation may take a  
while to be completed.  
7
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVideo mode (cont’d)  
Setting or clearing chapter markers  
Video  
DVD-RW  
You can put chapter markers in  
each title. Once a chapter is  
marked, you can use it for the  
chapter search feature.  
Disc > Edit  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Title Delete  
Edit Title Name  
Chapter Mark  
1
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
You can set chapter markers at a  
specified time you selected for  
titles with more than 5 minutes.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
JAN/ 1 1:00AM CH12 XP  
SPACE  
0
0:01:25  
DISPLAY  
VCR  
DVD  
PAUSE  
DVD  
First:  
PLAY  
4
STOP  
1
1
7
REC/OTR  
SETUP  
TIMER PROG.  
Select “Chapter Mark” using  
1
2
3
4
5
6
Press SETUP button. Select  
ENTER  
SKIP  
REC MONITOR  
K / L buttons, then press  
ENTER button.  
Option window will appear.  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Disc > Edit  
Title D
OFF  
Disc  
1
Edit Tit
5 minutes  
Chapte
Edit  
10 minutes  
15 minutes  
30 minutes  
60 minutes  
Format  
Finalize  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
5
2
Select a desired time using  
K
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
/
L buttons, then press  
ENTER button.  
Option window will appear.  
Titlelist will appear.  
Screen:  
Disc > Edit  
Title D
OFF  
5 minutes  
Chapte
10 minutes  
1
Edit Tit
Disc > Edit  
15 minutes  
30 minutes  
60 minutes  
1
12  
3
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
0:01:25  
JAN/1 4:00AM  
JAN/1 5:00AM  
6
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
3
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
Note  
A chapter marker will be added.  
• You cannot select a time for  
putting markers beyond a  
length of a title.  
• A chapter marker may be  
delayed according to the  
recording content.  
Edit menu will appear.  
7
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original)  
Deleting titles  
VR  
DVD-RW  
4
When a title is deleted from an  
original list inVR mode, the disc  
space to record will be increased.  
Be advised that the titles once  
deleted cannot be brought back  
to the disc.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
Original menu will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DVD  
Disc > Edit > Original  
First:  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
PLAY  
1
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
Press SETUP button. Select  
1
7
JAN/ 1 1:00AM CH12 XP  
1
2
3
4
5
6
ENTER  
SKIP  
REC MONITOR  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
0:01:25  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
5
Disc  
Edit  
Select “Title Delete” using  
K
Format  
/
L buttons, then press  
Finalize  
Disc Protect OFF ON  
ENTER button.  
Option window will appear.  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture  
Protect OFF ON  
2
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
Select “Edit” using K / L but-  
tons, then press ENTER button.  
Original/PlayList menu will appear.  
Screen:  
0:01:25  
Disc > Edit  
6
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Title will be deleted.  
Original  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture  
Protect OFF ON  
3
Yes  
No  
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
Original list will appear.  
This operation may take a  
while to be completed.  
Disc > Edit > Original  
1
12  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
7
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
JAN/1 4:00AM  
JAN/1 5:00AM  
65  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
Deleting parts of titles  
VR  
DVD-RW  
4
You can delete part of a title, the  
disc space to record will be  
increased.  
Be advised that the parts once  
deleted cannot be brought back  
to the disc.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
Original menu will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DVD  
Disc > Edit > Original  
First:  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
PLAY  
1
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
Press SETUP button. Select  
1
JAN/ 1 1:00AM CH12 XP  
1
2
3
4
5
6
ENTER  
SKIP  
REC MONITOR  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
0:01:25  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
5
Disc  
Edit  
Select “Scene Delete” using  
Format  
K / L buttons, then press  
ENTER button.  
Option window will appear.  
Finalize  
Disc Protect OFF ON  
Disc > Edit > Original  
Title Delete  
1
Scene D
Start  
Edit Titl
End  
Chapte
Preview  
Index P
2
Delete  
Protect
Select “Edit” using K / L but-  
tons, then press ENTER button.  
Original/PlayList menu will appear.  
Screen:  
JAN/ 1 1:00AM CH12 XP  
0:00:55  
Disc > Edit  
6
Press ENTER button to  
decide a start point, then  
press ENTER button to  
decide an end point.  
A cursor will move to “Preview.”  
You can check a preview.  
Original  
3
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
<Preview>  
Start point End point  
Original list will appear.  
Before  
editing  
Disc > Edit > Original  
1
12  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Edited  
JAN/1 4:00AM  
JAN/1 5:00AM  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
7
8
.@/:  
1
ABC  
2
DEF  
3
Select “Delete” using K /  
L
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
CH  
GHI  
4
JKL  
5
MNO  
6
buttons, then press ENTER  
button.  
Option window will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
Part of a title will be deleted.  
DISPLAY  
VCR  
DVD  
PAUSE  
Disc > Edit > Original  
Disc > Edit > Original  
PLAY  
Title Delete  
Title Delete  
1
1
Scene Delete  
Scene Delete  
Start  
Start  
STOP  
Edit Titl
End  
Edit Titl
End  
Chapte
Chapte
Preview  
Preview  
REC/OTR  
SETUP  
TIMER PROG.  
9
Index P
Index P
Delete  
Delete  
Protect
Protect
ENTER  
SKIP  
REC MONITOR  
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
Yes  
No  
7
8
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
MENU/LIST TOP MENU  
RETURN  
SKIP  
0:01:25  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
This operation may take a  
while to be completed.  
Note  
• You cannot select “Scene  
9
Delete” when the number of  
chapter markers in the original  
or playlist is more than 900.  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Putting names on titles  
VR  
DVD-RW  
2
You can put title names on the  
titles and change the names from  
this menu.  
The names you put on the titles  
will be displayed on a titlelist.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
Original/PlayList menu will appear.  
Screen:  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
DVD  
First:  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
Disc > Edit  
1
PLAY  
Press SETUP button. Select  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
ENTER  
SKIP  
REC MONITOR  
1
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
Original  
CLEAR/C-RESET ZOOM  
SEARCH  
Disc  
CM SKIP  
MODE  
Edit  
Format  
Finalize  
Disc Protect OFF ON  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
3
6
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
To enter a title name, follow  
the steps of "Guide to edit  
title name" on this page.  
character set  
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
6
8
Original list will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
Disc > Edit > Original  
Disc > Edit > Original > Edit Title Name  
DISPLAY  
VCR  
DVD  
PAUSE  
A B C  
a b c  
1 2 3  
@ ! ?  
1
1
12  
3
PLAY  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
JAN/ 1 1:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
JAN/1 4:00AM  
JAN/1 5:00AM  
0:01:25  
3
4
5
6
7
MENU/LIST TOP MENU  
RETURN  
SKIP  
area for entering title names  
When you finish entering a title  
name, press ENTER button.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
7
Original menu will appear.  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Disc > Edit > Original  
Title Delete  
1
The name you entered will be  
activated for the title.  
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
[
]
Guide to edit title name  
Step1 : Select a desired character set using  
[
]
K
L
/
buttons, then press  
ENTER button.  
A B C  
a b c  
1 2 3  
@ ! ?  
Disc > Edit > Original > Edit Title Name  
JAN/ 1 1:00AM CH12 XP  
A B C  
a b c  
1 2 3  
@ ! ?  
1
0:01:25  
[
]
Step2 : Press Number buttons following by the list  
below.  
Select  
ABC  
abc  
123  
@ ! ?  
Yes  
No  
Press  
abc  
5
<space>  
<space>  
0
<space>  
0
Writing to Disc  
” # $ %  
& ‘ ( ) *  
+ , - . / : ;  
< = > ?  
@ [ ] ^  
_ { | } !  
Select “EditTitle Name”  
1
1
using K / L buttons, then  
press ENTER button.  
A window for entering a title  
name will appear.  
This operation may take a  
while to be completed.  
2
3
4
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
GHI  
ghi  
JKL  
jkl  
5
6
8
Disc > Edit > Original > Edit Title Name  
MNO  
PQRS  
TUV  
WXYZ  
mno  
pqrs  
tuv  
A B C  
1
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
7
8
a b c  
1 2 3  
@ ! ?  
wxyz  
9
1
* Press  
button, character set will be changed  
to the " @ " mode automatically.  
!?  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
・To delete letters, press CLEAR/C-RESET button  
repeatedly. Holding CLEAR/C-CRESET button  
to delete all letters.  
・To go on to the next entering area for letters,  
B
　press  
button.  
・You can enter up to 30 letters.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
Setting or clearing chapter markers  
VR  
DVD-RW  
You can put chapter markers in  
Disc > Edit > Original  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
each title. Once a chapter is  
marked, you can use it for the  
chapter search feature.  
You can put a chapter marker  
anywhere you want.  
When the number of chapter  
markers in the original list comes  
to 999 in total, you cannot add  
any more chapter markers.  
1
2  
3
.@/:  
1
ABC  
2
DEF  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
JAN/1 4:00AM  
JAN/1 5:00AM  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
4
STOP  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
DVD  
REC/OTR  
SETUP  
TIMER PROG.  
1
First:  
ENTER  
SKIP  
REC MONITOR  
1
MENU/LIST TOP MENU  
RETURN  
SKIP  
Original menu will appear.  
1
2
3
4
5
6
CLEAR/C-RESET ZOOM  
SEARCH  
Press SETUP button. Select  
CM SKIP  
MODE  
Disc > Edit > Original  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
Disc  
JAN/ 1 1:00AM CH12 XP  
Edit  
0:01:25  
Format  
Finalize  
Disc Protect OFF ON  
5
Select “Chapter Mark” using  
K / L buttons, then press  
ENTER button.  
Option window will appear.  
2
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Add  
Chapte
Chapter 1/1  
Original/PlayList menu will appear.  
Screen:  
Delete  
Index P
Protect OFF ON  
JAN/ 1 1:00AM CH12 XP  
Disc > Edit  
0:01:25  
6
Select “Add” or “Delete”  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
<Add>:  
Original  
3
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Add  
Chapte
Chapter 1/1  
Original list will appear.  
Delete  
Index P
Protect OFF ON  
F
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
<Delete>:  
The chapter marker which you  
selected will be deleted.  
<Delete>:  
Disc > Edit > Original  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapte
.@/:  
1
ABC  
2
DEF  
3
Add  
Delete  
Chapter 2/2  
CH  
GHI  
4
JKL  
5
MNO  
6
Index P
Disc > Edit > Original  
Protect OFF ON  
F
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Yes  
No  
Title Delete  
1
Scene Delete  
Edit Title Name  
JAN/ 1 1:00AM CH12 XP  
SPACE  
0
Add  
Chapte
Chapter 2/2  
0:01:25  
Delete  
Index P
DISPLAY  
VCR  
DVD  
PAUSE  
Protect OFF ON  
Yes  
No  
•You cannot delete the first  
chapter marker of each title.  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
PLAY  
STOP  
8
REC/OTR  
SETUP  
TIMER PROG.  
7
ENTER  
SKIP  
REC MONITOR  
This operation may take a  
while to be completed.  
Select “Yes” using { / B but-  
tons, then press ENTER button.  
A chapter marker will be added.  
<Add>:  
7
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
8
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Add  
Chapte
Chapter 1/1  
Delete  
Index P
Protect OFF ON  
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
This operation may take a  
while to be completed.  
Setting pictures for thumbnails  
VR  
DVD-RW  
2
OPEN/CLOSE  
POWER  
You can set a picture to each title for  
REC SPEED AUDIO  
a thumbnail. It helps you to remem-  
ber the contents of the title you are  
playing.The beginning picture has  
been selected as the default.  
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Original/PlayList menu will appear.  
Screen:  
SPACE  
0
DVD  
First:  
DISPLAY  
VCR  
DVD  
PAUSE  
Disc > Edit  
PLAY  
1
STOP  
Press SETUP button. Select  
REC/OTR  
SETUP  
TIMER PROG.  
1
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
ENTER  
SKIP  
REC MONITOR  
1
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
Original  
CM SKIP  
MODE  
Disc  
Edit  
Format  
Note  
Finalize  
Disc Protect OFF ON  
• If a selected picture for a  
thumbnail is deleted by delet-  
ing a part of a title, a default  
picture will be selected.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
3
6
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
Select “Yes” using { / B but-  
.@/:  
1
ABC  
2
DEF  
3
tons, then press ENTER but-  
ton.  
A picture for thumbnail will be  
set.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Original list will appear.  
SPACE  
0
Disc > Edit > Original  
DISPLAY  
VCR  
DVD  
PAUSE  
1
12  
3
Disc > Edit > Original  
Title Delete  
1
PLAY  
Scene Delete  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
7
ENTER  
SKIP  
REC MONITOR  
Yes  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
No  
JAN/1 4:00AM  
JAN/1 5:00AM  
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
This operation may take a  
while to be completed.  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
7
Original menu will appear.  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
5
Select “Index Picture Set”  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
F
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
Setting titles to protect  
VR  
DVD-RW  
4
To prevent accidental editing or  
erasing the titles, you can protect  
them from the original menu.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
DVD  
First:  
Original menu will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
Disc > Edit > Original  
1
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
Press SETUP button. Select  
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
PLAY  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
STOP  
1
7
REC/OTR  
SETUP  
TIMER PROG.  
JAN/ 1 1:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
0:01:25  
1
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
Disc  
Edit  
CLEAR/C-RESET ZOOM  
SEARCH  
Format  
5
CM SKIP  
MODE  
Finalize  
Select “Protect OFF ➔ ON”  
using K / L buttons, then  
press ENTER button.  
Disc Protect OFF ON  
Option window will appear.  
Disc > Edit > Original  
Title Delete  
1
2
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
Original/PlayList menu will appear.  
Screen:  
0:01:25  
Disc > Edit  
6
Select “Yes” using { / B but-  
tons, then press ENTER button.  
Disc > Edit > Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect OFF ON  
Original  
Yes  
No  
3
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
This operation may take a  
while to be completed.  
Original list will appear.  
Disc > Edit > Original  
7
1
2  
3
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
JAN/1 4:00AM  
JAN/1 5:00AM  
To protect a whole disc  
(DVD-RWVR mode Only):  
Select “Disc Protect” from Disc  
menu, then select “Yes”.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Original) (cont’d)  
Releasing titles from protecting  
VR  
DVD-RW  
4
You are allowed to release the  
titles protecting feature once pro-  
tected.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
DVD  
First:  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Original menu will appear.  
SPACE  
0
1
Disc Edit > Original  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
2
Press SETUP button. Select  
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect ON OFF  
PLAY  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
7
JAN/ 1 2:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
0:01:25  
1
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
Disc  
Edit  
CLEAR/C-RESET ZOOM  
SEARCH  
Format  
CM SKIP  
MODE  
Finalize  
Disc Protect OFF ON  
5
Select “Protect ON ➔ OFF”  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
2
Disc Edit > Original  
Title Delete  
2
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
Original/PlayList menu will appear.  
Screen:  
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect ON OFF  
B
Yes  
JAN/ 1 2:00AM CH12 XP  
No  
0:01:25  
Disc > Edit  
6
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Original  
Disc Edit > Original  
Title Delete  
2
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Protect ON OFF  
3
Select “Original” using { /  
buttons, then press ENTER  
button.  
B
Yes  
No  
JAN/ 1 2:00AM CH12 XP  
Writing to Disc  
Original list will appear.  
This operation may take a  
while to be completed.  
Disc > Edit > Original  
1
2  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
7
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
JAN/1 4:00AM  
JAN/1 5:00AM  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist)  
Deleting titles  
VR  
DVD-RW  
4
InVR mode, even when a title is  
deleted from a Playlist, the original  
title will remain in an Original list.  
The disc space to record will not  
be increased.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Playlist menu will appear.  
DVD  
SPACE  
0
First:  
Disc > Edit > Playlist  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
1
PLAY  
STOP  
Press SETUP button. Select  
REC/OTR  
SETUP  
TIMER PROG.  
1
7
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
JAN/ 1 1:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
0:01:25  
1
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
Disc  
CM SKIP  
MODE  
5
Edit  
Format  
Select “Title Delete” using  
K
Finalize  
/
L buttons, then press  
Disc Protect OFF ON  
ENTER button.  
Option window will appear.  
Disc > Edit > Playlist  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
2
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
Select “Edit” using K / L but-  
tons, then press ENTER button.  
Original/PlayList menu will appear.  
Screen:  
0:01:25  
Disc > Edit  
6
Select “Yes” using { / B but-  
tons, then press ENTER button.  
Title will be deleted.  
Disc > Edit > Playlist  
Original  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
3
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
This operation may take a  
while to be completed.  
Playlist will appear.  
Disc > Edit > Playlist  
1
12  
3
7
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Add New  
Title  
Delete  
Playlist  
JAN/1 4:00AM  
JAN/1 5:00AM  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
Deleting parts of titles  
VR  
DVD-RW  
4
You can delete a specific part of a  
title.  
Even when a title is deleted from  
the playlist, the original title will  
remain.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Playlist menu will appear.  
The disc space to record will not  
be increased.  
SPACE  
0
Disc > Edit > Playlist  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
DVD  
First:  
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
1
JAN/ 1 1:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
Press SETUP button. Select  
0:01:25  
1
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
5
Select “Scene Delete” using  
K / L buttons, then press  
ENTER button.  
Disc  
Edit  
Format  
Finalize  
Disc Protect OFF ON  
Option window will appear.  
Disc > Edit > Playlist  
Title Delete  
1
Scene D
Start  
Edit Titl
End  
Chapte
Preview  
Index P
Delete  
2
JAN/ 1 1:00AM CH12 XP  
Select “Edit” using K / L but-  
tons, then press ENTER button.  
Original/PlayList menu will appear.  
Screen:  
0:00:55  
6
Disc > Edit  
Press ENTER button to  
decide a start point, then  
press ENTER button to  
decide an end point.  
A cursor will move to “Preview”.  
You can check a preview.  
Original  
3
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
<Preview>  
Start point End point  
Playlist will appear.  
Before  
editing  
Disc > Edit > Playlist  
1
2  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Edited  
Add New  
Title  
Delete  
Playlist  
JAN/1 4:00AM  
JAN/1 5:00AM  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
.@/:  
1
ABC  
2
DEF  
3
Part of a title will be deleted.  
CH  
GHI  
4
JKL  
5
MNO  
6
7
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Disc > Edit > Playlist  
Title Delete  
1
Select “Delete” using K /  
L
SPACE  
0
Scene De
Start  
Edit Titl
End  
buttons, then press ENTER  
button.  
DISPLAY  
VCR  
DVD  
PAUSE  
Chapte
Preview  
Index P
Delete  
Yes  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
No  
PLAY  
Option window will appear.  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
Disc > Edit > Playlist  
9
Title Delete  
1
ENTER  
SKIP  
REC MONITOR  
Scene Delete  
Start  
Edit Titl
End  
This operation may take a  
while to be completed.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
7
8
Chapte
Preview  
Index P
Delete  
CLEAR/C-RESET ZOOM  
SEARCH  
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
CM SKIP  
MODE  
0:01:25  
9
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Note  
8
• You cannot select “Scene  
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Delete” when the number of  
chapter markers in the original  
or playlist is more than 900.  
Putting names on titles  
VR  
Original/PlayList menu will appear.  
Screen:  
DVD-RW  
You can put names on the titles  
and change the names from this  
menu.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Disc > Edit  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
The names you put on the titles  
will be displayed on a titlelist.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
DVD  
SPACE  
0
First:  
DISPLAY  
VCR  
DVD  
PAUSE  
Original  
1
PLAY  
STOP  
Press SETUP button. Select  
REC/OTR  
SETUP  
TIMER PROG.  
3
1
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
ENTER  
SKIP  
REC MONITOR  
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
MENU/LIST TOP MENU  
RETURN  
SKIP  
1
2
3
CLEAR/C-RESET ZOOM  
SEARCH  
Disc  
CM SKIP  
MODE  
Playlist will appear.  
Edit  
Format  
Disc > Edit > Playlist  
Finalize  
Disc Protect OFF ON  
1
2  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Add New  
Title  
Delete  
Playlist  
JAN/1 4:00AM  
JAN/1 5:00AM  
2
Select “Edit” using K / L but-  
tons, then press ENTER button.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
4
7
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select a desired title using K / Select “Yes” using { / B but-  
.@/:  
1
ABC  
2
DEF  
3
tons, then press ENTER but-  
ton.  
The name you entered will be  
activated for the title.  
L / { / B buttons, then press  
ENTER button.  
Playlist menu will appear.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
Disc > Edit > Playlist  
DISPLAY  
VCR  
DVD  
PAUSE  
Title Delete  
1
Disc > Edit > Playlist > Edit Title Name  
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
A B C  
1
PLAY  
a b c  
1 2 3  
@ ! ?  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
8
JAN/ 1 1:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
Yes  
No  
0:01:25  
4
5
6
7
abc  
MENU/LIST TOP MENU  
RETURN  
SKIP  
Writing to Disc  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
This operation may take a  
while to be completed.  
5
Select “EditTitle Name”  
using K / L buttons, then  
press ENTER button.  
A window for entering a title  
name will appear.  
8
After writing to disc is com-  
pleted, press SETUP to exit  
DISC menu.  
Disc > Edit > Playlist > Edit Title Name  
A B C  
a b c  
1 2 3  
@ ! ?  
1
[
]
Guide to edit title name  
[
[
]
Step1 : Select a desired character set using  
K
L
/
buttons, then press  
ENTER button.  
A B C  
a b c  
1 2 3  
@ ! ?  
JAN/ 1 1:00AM CH12 XP  
]
Step2 : Press Number buttons following by the list  
0:01:25  
below.  
Select  
ABC  
abc  
123  
@ ! ?  
Press  
<space>  
<space>  
0
<space>  
0
” # $ %  
& ‘ ( ) *  
+ , - . / : ;  
< = > ?  
@ [ ] ^  
_ { | } !  
6
1
1
To enter a title name, follow  
the steps of "Guide to edit  
title name" on this page.  
character set  
2
3
4
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
GHI  
ghi  
JKL  
jkl  
5
6
MNO  
PQRS  
TUV  
WXYZ  
mno  
pqrs  
tuv  
Disc > Edit > Playlist > Edit Title Name  
7
8
A B C  
a b c  
1 2 3  
@ ! ?  
1
wxyz  
9
1
* Press  
button, character set will be changed  
!?  
to the " @ " mode automatically.  
JAN/ 1 1:00AM CH12 XP  
・To delete letters, press CLEAR/C-RESET button  
repeatedly. Holding CLEAR/C-CRESET button  
to delete all letters.  
0:01:25  
・To go on to the next entering area for letters,  
area for entering title names  
B
　press  
button.  
・You can enter up to 30 letters.  
When you finish entering a title  
name, press ENTER button.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
Setting or clearing chapter markers  
VR  
DVD-RW  
You can put chapter markers in  
each title. Once a chapter is  
marked, you can use it for the  
chapter search feature.  
You can put a chapter marker  
anywhere you want.  
Disc > Edit > Playlist  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
2  
3
.@/:  
1
ABC  
2
DEF  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
CH  
GHI  
4
JKL  
5
MNO  
6
Add New  
Title  
Delete  
Playlist  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
JAN/1 4:00AM  
JAN/1 5:00AM  
When the number of chapter  
markers in the playlist comes to  
999 in total, you cannot add any  
more chapter markers.  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
4
STOP  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
REC/OTR  
SETUP  
TIMER PROG.  
DVD  
1
First:  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
1
2
3
4
5
6
Playlist menu will appear.  
1
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Press SETUP button. Select  
Disc > Edit > Playlist  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
Disc  
JAN/ 1 1:00AM CH12 XP  
Edit  
0:01:25  
Format  
Finalize  
Disc Protect OFF ON  
5
Select “Chapter Mark” using  
K / L buttons, then press  
ENTER button.  
Option window will appear.  
2
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
Disc > Edit > Playlist  
Title Delete  
1
Scene Delete  
Edit Title Name  
Add  
Chapter 1/1  
Chapte
Original/PlayList menu will appear.  
Screen:  
Delete  
Index P
JAN/ 1 1:00AM CH12 XP  
0:01:25  
6
Select “Add” or “Delete”  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
<Add>:  
Disc Setting  
3
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
Disc > Edit > Playlist  
Title Delete  
1
Scene Delete  
Edit Title Name  
Add  
Chapter 1/1  
Chapte
Playlist will appear.  
Delete  
Index P
F
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
<Delete>:  
The chapter marker which you  
selected will be deleted.  
<Delete>:  
Disc > Edit > Playlist  
Title Delete  
OPEN/CLOSE  
POWER  
1
REC SPEED AUDIO  
Scene Delete  
Edit Title Name  
Add  
Chapter 2/2  
Chapte
.@/:  
1
ABC  
2
DEF  
3
Delete  
Index P
Disc > Edit > Playlist  
CH  
GHI  
4
JKL  
5
MNO  
6
F
Yes  
No  
Title Delete  
1
Scene Delete  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
JAN/ 1 1:00AM CH12 XP  
Edit Title Name  
Add  
Chapter 2/2  
Chapte
0:01:25  
SPACE  
0
Delete  
Index P
DISPLAY  
VCR  
DVD  
PAUSE  
Yes  
No  
•You cannot delete the first  
chapter of each title.  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
7
8
This operation may take a  
while to be completed.  
ENTER  
SKIP  
REC MONITOR  
S
elect “Yes” using { / B but-  
7
MENU/LIST TOP MENU  
RETURN  
SKIP  
tons, then press ENTER button.  
A chapter marker will be added.  
<Add>:  
CLEAR/C-RESET ZOOM  
SEARCH  
8
CM SKIP  
MODE  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Disc > Edit > Playlist  
Title Delete  
1
Scene Delete  
Edit Title Name  
Add  
Chapter 1/1  
Chapte
Delete  
Index P
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
This operation may take a  
while to be completed.  
Setting pictures for thumbnails  
VR  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
DVD-RW  
2
You can set a picture to each title  
for a thumbnail. It helps you to  
remember the contents of the  
title you are playing.The begin-  
ning picture has been selected as  
the default.  
.@/:  
1
ABC  
2
DEF  
3
CH  
Select “Edit” using K / L but-  
GHI  
4
JKL  
5
MNO  
6
tons, then press ENTER but-  
ton.  
Original/PlayList menu will appear.  
Screen:  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
DVD  
First:  
PLAY  
Disc > Edit  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
1
ENTER  
SKIP  
REC MONITOR  
Press SETUP button. Select  
1
2
MENU/LIST TOP MENU  
RETURN  
SKIP  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Original  
Note  
Disc  
Edit  
• If a selected picture for a  
Format  
thumbnail is deleted by delet-  
ing a part of a title, a default  
picture will be selected.  
Finalize  
Disc Protect OFF ON  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
3
6
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
Select “Yes” using { / B but-  
.@/:  
1
ABC  
2
DEF  
3
tons, then press ENTER but-  
ton.  
A picture for thumbnail will be  
set.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Playlist will appear.  
SPACE  
0
Disc > Edit > Playlist  
DISPLAY  
VCR  
DVD  
PAUSE  
1
12  
3
Disc > Edit > Playlist  
Title Delete  
1
PLAY  
Scene Delete  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Edit Title Name  
Chapter Mark  
Index Picture Set  
STOP  
Add New  
Title  
Delete  
Playlist  
REC/OTR  
SETUP  
TIMER PROG.  
7
ENTER  
SKIP  
REC MONITOR  
Yes  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
No  
JAN/1 4:00AM  
JAN/1 5:00AM  
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
4
This operation may take a  
while to be completed.  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
7
Playlist menu will appear.  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Disc > Edit > Playlist  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
5
Select “Index Picture Set”  
using K / L buttons, then  
press ENTER button.  
Option window will appear.  
Disc > Edit > Playlist  
Title Delete  
1
Scene Delete  
Edit Title Name  
Chapter Mark  
Index Picture Set  
F
Yes  
No  
JAN/ 1 1:00AM CH12 XP  
0:01:25  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
Adding titles to a Playlist  
VR  
DVD-RW  
4
You can add or delete a title in  
the playlist as you prefer.  
You can add titles to a Playlist up  
to 99.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Add NewTitle” using  
.@/:  
1
ABC  
2
DEF  
3
K / L / { / B buttons, then  
press ENTER button.  
Original list will appear.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
DVD  
First:  
SPACE  
0
Disc > Edit > Playlist > Add New Title  
DISPLAY  
VCR  
DVD  
PAUSE  
1
1
12  
3
PLAY  
Press SETUP button. Select  
JAN/10 10:30AM  
JAN/12 5:00PM  
JAN/12 8:00PM  
STOP  
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
REC/OTR  
SETUP  
TIMER PROG.  
1
6
ENTER  
SKIP  
REC MONITOR  
1
2
3
4
5
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
Disc  
Edit  
CM SKIP  
MODE  
Format  
5
Finalize  
Disc Protect OFF ON  
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
Disc > Edit > Playlist > Add New Title  
2
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
58%  
Writing to Disc  
Original/PlayList menu will appear.  
Screen:  
Disc > Edit > Playlist  
Disc > Edit  
1
2  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
6
JAN/1 4:00AM  
JAN/1 5:00AM  
JAN/12 8:00PM  
Original  
6
3
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
Playlist will appear.  
To delete a title from Playlist,  
refer to “Deleting titles” on page  
74.  
To delete a Playlist, refer to  
“Deleting a Playlist” on page 82.  
Disc > Edit > Playlist  
1
12  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Add New  
Title  
Delete  
Playlist  
JAN/1 4:00AM  
JAN/1 5:00AM  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-RW discs inVR mode (Playlist) (cont’d)  
Deleting a Playlist  
VR  
DVD-RW  
4
A Playlist can be deleted if no  
longer needed.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “Delete Playlist” using  
.@/:  
1
ABC  
2
DEF  
3
DVD  
K / L / { / B buttons, then  
press ENTER button.  
Option window will appear.  
First:  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
SPACE  
0
Disc > Edit > Playlist  
Press SETUP button. Select  
DISPLAY  
VCR  
DVD  
PAUSE  
1
12  
3
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
PLAY  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
STOP  
Add New  
Title  
REC/OTR  
SETUP  
TIMER PROG.  
1
6
Delete  
Playlist  
ENTER  
SKIP  
REC MONITOR  
Disc  
Yes  
No  
JAN/1 4:00AM  
JAN/1 5:00AM  
1
2
3
4
5
Edit  
MENU/LIST TOP MENU  
RETURN  
SKIP  
Format  
CLEAR/C-RESET ZOOM  
SEARCH  
Finalize  
Disc Protect OFF ON  
CM SKIP  
MODE  
5
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
A Playlist will be erased.  
2
Disc > Edit > Playlist  
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
Add New  
Title  
Delete  
Playlist  
Original/PlayList menu will appear.  
Screen:  
Disc > Edit  
6
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Original  
3
Select “PlayList” using { /  
buttons, then press ENTER  
button.  
B
Playlist will appear.  
Disc > Edit > Playlist  
1
12  
3
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
Add New  
Title  
Delete  
Playlist  
Note  
• Deleting a Playlist will not  
JAN/1 4:00AM  
JAN/1 5:00AM  
increase the available record-  
ing time on disc.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-R discs  
Deleting titles  
DVD-R  
Disc > Edit  
You can delete titles which you  
do not need, however the disc  
space to record on the disc will  
not be changed.  
Be sure to know that the titles  
once deleted cannot be brought  
back to the disc.  
Title Delete  
Edit Title Name  
Chapter Mark  
1
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
JAN/ 1 1:00AM CH12 XP  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
0:01:25  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
You cannot select “Chapter Mark”.  
DVD  
First:  
PLAY  
STOP  
4
REC/OTR  
SETUP  
TIMER PROG.  
1
6
1
Select “Title Delete” using  
K
ENTER  
SKIP  
REC MONITOR  
Press SETUP button. Select  
/
L buttons, then press  
MENU/LIST TOP MENU  
RETURN  
SKIP  
1
2
3
4
5
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
ENTER button.  
CLEAR/C-RESET ZOOM  
SEARCH  
Option window will appear.  
CM SKIP  
MODE  
Disc > Edit  
Title Delete  
1
Disc  
Edit Title Name  
Chapter Mark  
Edit  
Format  
Finalize  
Yes  
JAN/ 1 1:00AM CH12 XP  
No  
0:01:25  
5
2
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
Select “Edit” using K / L but-  
tons, then press ENTER but-  
ton.  
Title will be deleted.  
Titlelist will appear.  
Screen:  
Disc > Edit  
Title Delete  
1
Edit Title Name  
Chapter Mark  
Disc > Edit  
1
12  
3
Yes  
No  
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
JAN/ 1 1:00AM CH12 XP  
Writing to Disc  
JAN/1 4:00AM  
JAN/1 5:00AM  
This operation may take a  
while to be completed.  
3
6
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
Edit menu will appear.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing  
Editing DVD-R discs (cont’d)  
Putting names on titles  
DVD-R  
4
You can put names on the titles  
and change the names from this  
menu.  
The names you put on the titles  
will be displayed on a titlelist.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Select “EditTitle Name”  
using K / L buttons, then  
press ENTER button.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
5
A window for entering a title  
name will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
DVD  
SPACE  
0
First:  
Disc > Edit > Edit Title Name  
DISPLAY  
VCR  
DVD  
PAUSE  
A B C  
a b c  
1 2 3  
@ ! ?  
1
1
PLAY  
STOP  
Press SETUP button. Select  
REC/OTR  
SETUP  
TIMER PROG.  
1
7
“DISC” using { / B buttons,  
then press ENTER button.  
DISC menu will appear.  
JAN/ 1 1:00AM CH12 XP  
ENTER  
SKIP  
REC MONITOR  
0:01:25  
1
2
3
4
5
6
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
Disc  
CM SKIP  
MODE  
5
Edit  
To enter a title name, follow  
the steps of "Guide to edit  
title name" on this page.  
character set  
Format  
Finalize  
Disc > Edit > Edit Title Name  
A B C  
a b c  
1 2 3  
@ ! ?  
1
2
[
]
Guide to edit title name  
Select “Edit” using K /  
L
but-  
[
]
Step1 : Select a desired character set using  
K
L
JAN/ 1 1:00AM CH12 XP  
/
tons, then press ENTER button.  
Titlelist will appear.  
Screen:  
buttons, then press  
ENTER button.  
A B C  
a b c  
1 2 3  
@ ! ?  
0:01:25  
area for entering title names  
When you finish entering a title  
name, press ENTER button.  
[
]
Step2 : Press Number buttons following by the list  
below.  
Select  
Disc > Edit  
ABC  
abc  
123  
@ ! ?  
Press  
1
2  
3
<space>  
<space>  
0
<space>  
0
” # $ %  
& ‘ ( ) *  
+ , - . / : ;  
< = > ?  
@ [ ] ^  
_ { | } !  
6
JAN/1 1:00AM  
4
JAN/1 2:00AM  
5
JAN/1 3:00AM  
1
1
Select “Yes” using { / B but-  
tons, then press ENTER but-  
ton.  
JAN/1 4:00AM  
JAN/1 5:00AM  
2
3
4
ABC  
DEF  
abc  
def  
2
3
4
5
6
7
8
9
GHI  
ghi  
Disc > Edit > Edit Title Name  
JKL  
jkl  
5
6
3
A B C  
a b c  
1 2 3  
@ ! ?  
1
MNO  
PQRS  
TUV  
WXYZ  
mno  
pqrs  
tuv  
7
8
Select a desired title using K /  
L / { / B buttons, then press  
ENTER button.  
wxyz  
9
Yes  
No  
1
* Press  
button, character set will be changed  
abc  
to the " @ " mode automatically.  
!?  
Edit menu will appear.  
Writing to Disc  
・To delete letters, press CLEAR/C-RESET button  
repeatedly. Holding CLEAR/C-CRESET button  
to delete all letters.  
Disc > Edit  
This operation may take a  
while to be completed.  
・To go on to the next entering area for letters,  
Title Delete  
Edit Title Name  
Chapter Mark  
1
B
　press  
button.  
・You can enter up to 30 letters.  
7
JAN/ 1 1:00AM CH12 XP  
After writing to disc is com-  
pleted, press SETUP button  
to exit DISC menu.  
0:01:25  
You cannot select “Chapter Mark”.  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Tour of the SETUP menu  
The following table is the contents which you can set and the default settings.  
Refer to the following table for useful operation.  
SETUP menu  
Items (highlight is the default)  
Contents  
1.Language setting  
Pages 86-87  
English  
French  
Spanish  
Disc Menu Language  
Set the language for disc menu.  
Original  
English  
French  
Audio Language  
Subtitle Language  
Set the language for audio.  
Set the language for subtitle.  
OFF  
English  
French  
100%  
OSD Background  
Transparency  
Set the background transparency of OSD  
screen.  
2.Display setting  
Pages 88-89  
35%  
25%  
OSD Background  
Color  
1
2
3
Set the OSD screen color.  
1 (Green), 2 (Blue), 3 (Red)  
OSD Language  
English  
Français  
Español  
Set the language for OSD  
(On Screen Display).  
Screen Saver  
OFF  
5 minutes  
10minutes  
Set the time to work the screen saver on  
the screen.  
PCM  
Digital Out  
3.Audio setting  
Pages 90-91  
Set whether the sound recorded in 96kHz  
will be down sampled in 48kHz.  
Auto  
48kHz  
96kHz  
Dolby Digital  
Set the type of sound signal which outputs  
from the digital audio output jack.  
PCM  
Stream  
Compressing the range of sound volume.  
Dynamic Range  
Control  
ON  
OFF  
Outputting the sound during play in fast  
forward.  
Fast Forward with  
Audio  
ON  
OFF  
4.Parental setting  
Pages 92-93  
ALL  
level 8 to 1  
Set the parental level of your DVD discs.  
Parental Lock  
Enter the current  
four-digit password  
Set and change the password.  
(Change password)  
Note  
• If you change the setting in SETUP  
menu, the information of contents  
stays on even when the power is  
switched off.  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Language  
Press STOP button if you are playing a disc.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
.@/:  
1
ABC  
2
DEF  
3
4
Press SETUP button to display SETUP/DISC menu.  
CH  
GHI  
4
JKL  
5
MNO  
6
SETUP/DISC menu will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
STOP  
1
5
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
Setup Menu  
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
2
CM SKIP  
MODE  
Select “SETUP” using { / B buttons, then press  
ENTER button.  
SETUP menu will appear.  
Setup  
Playback Setting  
3
Select “Playback” using K / L / { /  
B
buttons, then press  
ENTER button.  
Option window will appear.  
DVD  
Setup > Playback  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
4
Select a desired item using K / L buttons, then press  
Note  
ENTER button.  
• Only the languages supported  
by the disc can be selected.  
• Audio Language setting may  
not be available to some  
discs.  
• You can change or switch off  
the subtitles on a DVD disc  
also from the disc menu if it  
is available.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Language (cont’d)  
Disc Menu Language (Default : English)  
Set the language for Disc Menu.  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
DVD  
Setup > Playback  
DVD  
Setup > Playback  
TV Aspect  
4:3 Letter Box  
All  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
Parental Lock  
Your setting will be activated.  
English  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
French  
Spanish  
Other  
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
OFF  
Audio Language (Default : Original)  
Set the Audio language.  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
DVD  
DVD  
Setup > Playback  
Setup > Playback  
TV Aspect  
TV Aspect  
4:3 Letter Box  
All  
4:3 Letter Box  
All  
Parental Lock  
Parental Lock  
Original  
Your setting will be activated.  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
French  
Spanish  
Other  
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
OFF  
Subtitle Language (Default : OFF)  
Set the subtitle language.  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
DVD  
DVD  
Setup > Playback  
Setup > Playback  
TV Aspect  
TV Aspect  
4:3 Letter Box  
All  
4:3 Letter Box  
All  
Parental Lock  
Parental Lock  
OFF  
Your setting will be activated.  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
French  
Other  
Spanish  
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
OFF  
If “Other” is selected, press 4-digit code using number buttons.  
All  
English  
•
When you finish entering  
the code, press ENTER  
button. Refer to the lan-  
guage code table on page  
101.  
age  
French  
Spanish  
e
Other  
Code Input  
- - - -  
Control  
Audio  
ON  
OFF  
5
Press SETUP button to exit SETUP menu.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Display  
Press STOP button if you are playing a disc.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
.@/:  
1
ABC  
2
DEF  
3
Press SETUP button to display SETUP/DISC menu.  
CH  
GHI  
4
JKL  
5
MNO  
6
SETUP/DISC menu will appear.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
STOP  
1
5
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
Setup Menu  
REC MONITOR  
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
2
CM SKIP  
MODE  
Select “SETUP” using { / B buttons, then press  
ENTER button.  
SETUP menu will appear.  
Setup  
Playback Setting  
3
Select “Display” using K / L / { /  
B
buttons, then press  
ENTER button.  
Option window will appear.  
DVD  
Setup > Display  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
1
English  
10 minutes  
Screen Saver  
4
Select a desired item using K / L buttons, then press  
ENTER button.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Display (cont’d)  
OSD BackgroundTransparency (Default : 35%)  
Set the background transparency of OSD screen.  
You can choose one among 0% through 100%.  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
DVD  
Setup > Display  
DVD  
Setup > Display  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
100%  
OSD Background Transparency  
OSD Background Color  
OSD Language  
85%  
70%  
1
Your setting will be activated.  
English  
10 minutes  
50%  
Screen Saver  
Screen Saver  
s  
35%  
25%  
10%  
0%  
OSD Background Color (Default : 1 Green)  
Set the OSD screen color.  
You can choose one among 1(Green), 2(Blue), and 3(Red).  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
DVD  
Setup > Display  
DVD  
Setup > Display  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
1  
2
1
Your setting will be activated.  
English  
10 minutes  
3
Screen Saver  
Screen Saver  
10 minutes  
OSD Language (Default : English)  
Set the language for OSD.  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
Setup > Display  
VCR DVD  
Setup > Display  
VCR DVD  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
1
1
Your setting will be activated.  
English  
English  
10 minutes  
Français  
Screen Saver  
Screen Saver  
s  
Español  
Screen Saver (Default : 10 minutes)  
Set the time to work the screen saver function on the screen.  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
DVD  
Setup > Display  
DVD  
Setup > Display  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
OSD Background Transparency  
OSD Background Color  
OSD Language  
35%  
1
1
OFF  
Your setting will be activated.  
English  
10 minutes  
5 minutes  
Screen Saver  
Screen Saver  
10 minutes  
s  
15 minutes  
30 minutes  
5
Press SETUP button to exit SETUP menu.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Audio  
Choose the appropriate Audio settings for your equipment as  
it will only affect DVD discs during playback.  
Press STOP button if you are playing a disc.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
1
SPACE  
0
Press SETUP button to display SETUP/DISC menu.  
DISPLAY  
VCR  
DVD  
PAUSE  
SETUP/DISC menu will appear.  
PLAY  
STOP  
1
5
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
Setup Menu  
CM SKIP  
MODE  
2
Select “SETUP” using { / B buttons, then press  
ENTER button.  
SETUP menu will appear.  
Setup  
Playback Setting  
3
Select “Playback” using K / L / { /  
B
buttons, then press  
ENTER button.  
Option window will appear.  
DVD  
Setup > Playback  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
4
Select a desired item using K / L buttons, then press  
ENTER button.  
Note  
• Dynamic Range Control func-  
tion is available only on the  
discs which are recorded in  
the Dolby Digital format.  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Audio (cont’d)  
Digital Out  
Set the digital audio output.  
•
Select a setting using K /  
L
buttons, then press ENTER  
button.  
DVD  
Setup > Playback  
DVD  
Setup > Playback  
TV Aspect  
4:3 Letter Box  
All  
TV Aspect  
4:3 Letter Box  
All  
Option window will appear.  
Proceed to steps A or B.  
Parental Lock  
Parental Lock  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
PCM  
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
Dolby Digital  
OFF  
OFF  
Settings for Dolby Digital (Default : Stream)  
A
•
Select a setting using K / L buttons, then  
Original  
OFF  
Note  
press ENTER button.  
When playing a DVD-RW  
disc recorded inVR mode  
• If the audio source on a disc is  
Dolby Digital format, set “Dolby  
Digital” to “PCM” so that you  
can switch to main (L), sub  
Your setting will be activated.  
PCM : Convert the Dolby Digital into PCM  
(2 channel).  
When your amplifier/decoder is NOT com-  
patible with Dolby Digital, set to “PCM”.  
Stream : Outputs a Dolby Digital signals.  
When your amplifier/decoder is compati-  
ble with Dolby Digital, set to “Stream”.  
PCM  
Do
PCM  
ntrol  
udio  
Stream  
audio (R), or a mix of both (L/R)  
with your amplifier/decoder.  
Settings for PCM (Default :Auto)  
B
•
Select a setting using K / L buttons, then  
press ENTER button.  
Original  
OFF  
Note  
When playing disc with copy-  
right protection  
Your setting will be activated.  
Auto  
: Select “Auto” usually.  
• If you select “Auto”, the sound  
will be down sampled at 48kHz.  
• If you select “96kHz”, no digital  
sound will be output. Select  
“Auto”, so that outputting  
48kHz digital sound.  
PCAuto  
48kHz : If your amplifier/decoder is NOT com-  
patible with 96kHz PCM, select “48kHz”.  
96kHz sound will be output in 48kHz.  
96kHz : If your amplifier/decoder is compatible  
with 96kHz PCM, select “96kHz”. 96kHz  
sound will be output.  
48kHz  
ntrol  
udio  
Dol
96kHz  
Dynamic Range Control (Default : ON)  
Set to ON to compress the range between soft and loud sounds.  
DVD  
Setup > Playback  
DVD  
Setup > Playback  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
TV Aspect  
4:3 Letter Box  
All  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
Parental Lock  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Your setting will be activated.  
ON  
O
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
OFF  
OFF  
OFF  
Fast Forward with Audio (Default : OFF)  
Set to ON to output the sound during playback in fast forward of x2.  
DVD  
Setup > Playback  
DVD  
Setup > Playback  
•
Select a setting using K /  
buttons, then press ENTER  
button.  
L
TV Aspect  
4:3 Letter Box  
All  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
Parental Lock  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Your setting will be activated.  
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
ON  
ON  
OFF  
O
OFF  
5
Press SETUP button to exit SETUP menu.  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Parental lock level  
Some DVD-Video discs feature a Parental Lock level. Playback  
will stop if the ratings exceed the levels you set, it will require  
you to enter a password before the disc will playback.This fea-  
ture prevents your children from viewing inappropriate materi-  
al.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
4
CH  
GHI  
4
JKL  
5
MNO  
6
Press STOP button if you are playing a disc.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
PLAY  
Press SETUP button to display SETUP/DISC menu.  
STOP  
SETUP/DISC menu will appear.  
1
5
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
SKIP  
REC MONITOR  
2
3
4
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Setup Menu  
2
Select “SETUP” using { / B buttons, then press  
ENTER button.  
SETUP menu will appear.  
Setup  
Playback Setting  
3
Select “Playback” using K / L / { /  
B
buttons, then press  
ENTER button.  
Option window will appear.  
DVD  
Setup > Playback  
Note  
TV Aspect  
4:3 Letter Box  
All  
Parental Lock  
• Parental lock function may  
not be available to some  
discs.  
• With some DVDs, it may be  
difficult to find if they are  
compatible with parental lock.  
Be sure to check if the  
parental lock function oper-  
ates in the way that you have  
set.  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Dynamic Range Control  
Fast Forward with Audio  
ON  
OFF  
4
Select “Parental Lock” using K / L buttons, then press  
ENTER button.  
• Record the password in case  
you forget it.  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the SETUP menu  
Settings for Parental lock level (cont’d)  
Parental Lock (Default :All)  
Set the Parental Lock level.  
•
Change the parental level  
using K / L buttons, then  
press ENTER button.  
DVD  
Setup > Playback  
DVD  
Setup > Playback  
TV Aspect  
4:3 Letter Box  
All  
TV Aspect  
etter Box  
All  
Parental Lock  
8
7
6
5
4
3
Parental Lock  
Option window will appear.  
Proceed to steps A or B.  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
English  
Original  
OFF  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
ish  
inal  
2
Dynamic Range Control  
Fast Forward with Audio  
ON  
Dynamic Range Control  
Fast Forward with Audio  
1
OFF  
OFF  
A password has not been set yet  
A
•
Select “Yes” using s /  
B
DVD  
Setup > Playback  
DVD  
Setup > Playback  
buttons, then enter a new  
password using Number  
buttons.  
TV Aspect  
Change Password?  
Yes  
TV Aspect  
Password  
Yes  
No  
- - - -  
Parental Lock  
Parental Lock  
7
7
6
5
4
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
ish  
6
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
ish  
nal  
nal  
5
4
3
Your setting will be activated.  
3
2
2
Dynamic Range Control  
Fast Forward with Audio  
1
Dynamic Range Control  
Fast Forward with Audio  
1
OFF  
OFF  
• If you select “No”, proceed  
to Step 5.  
A password has been set already  
Change the password  
B
DVD  
DVD  
Setup > Playback  
Setup > Playback  
DVD  
Setup > Playback  
TV Aspect  
TV Aspect  
etter Box  
All  
Change Password?  
TV Aspect  
Password  
Yes  
Yes  
No  
- - - -  
Password  
Parental Lock  
Parental Lock  
Parental Lock  
* * * *  
7
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
ish  
Disc Menu Language  
Audio Language  
Subtitle Language  
Digital Out  
lish  
6
Disc Menu Language  
Audio Language  
ish  
6
6
nal  
inal  
inal  
5
5
5
4
4
4
Subtitle Language  
Digital Out  
3
3
3
2
2
2
Dynamic Range Control  
Fast Forward with Audio  
1
Dynamic Range Control  
Fast Forward with Audio  
1
Dynamic Range Control  
Fast Forward with Audio  
1
OFF  
OFF  
OFF  
• If you select “No”, proceed  
to Step 5.  
•
Enter the current password  
using Number buttons.  
•
Select “Yes” using s /  
B
buttons, then enter a new  
password using Number  
buttons.  
Your setting will be activated.  
Note  
• Press CLEAR/C-RESET but-  
ton to erase numbers entered  
incorrectly.  
• When you forget the pass-  
word or you want to clear all  
settings in Parental lock, enter  
4,7,3,7 using Number buttons  
in option window. Password  
will be cleared and parental  
levels will be set to All.  
5
Press SETUP button to exit SETUP menu.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR functions  
Playback  
VCR  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
3
1
1
.@/:  
1
ABC  
2
DEF  
3
During playback, press  
CH  
GHI  
4
JKL  
5
MNO  
6
Press POWER button on the  
remote control or the front  
panel of the unit.  
PAUSE F button.  
Playback will pause and sound will  
be muted.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
When you are playing a tape, turn  
the TV on and be sure to select  
the input to which the unit is con-  
nected.  
DISPLAY  
VCR  
DVD  
PAUSE  
3
5
4
PLAY  
2
4
STOP  
Press PLAY B button to  
REC/OTR  
SETUP  
TIMER PROG.  
VCR  
resume play.  
Press:  
Note  
5
2
• When a tape without record  
tab is inserted, the unit will  
start playback automatically.  
• Tracking will be automatically  
adjusted upon playback.To  
adjust the tracking manually,  
press the CHANNEL K/L  
buttons on the front panel of  
the unit or CHK/CHL but-  
tons on the remote control.  
Insert a prerecorded tape,  
Press STOP C button to stop  
playback.  
then press PLAY B button to  
begin playback.  
6
Press STOP/EJECT  
C
A but-  
ton on the front panel of the  
unit to eject the tape.  
Recording and One-touch timer recording  
PQRS  
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
Recording  
7
SPACE  
0
VCR  
First:  
VCR  
DISPLAY  
VCR  
DVD  
PAUSE  
1
2
Before recording, make sure:  
PLAY  
•
The desired channel is selected  
by pressing the number buttons  
on the remote control or  
1
STOP  
Press REC/OTR button to  
begin the recording.  
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
REC MONITOR  
CHANNEL K/L buttons on the  
front panel of the unit.  
To temporarily stop recording or  
to resume it, press PAUSE F but-  
ton. After the unit has been in  
Pause mode for 5 minutes, it will  
stop automatically to protect the  
tape and the video head from  
damage.  
Note  
•
•
There is a tape with a record tab  
in the unit.  
• To view one channel while  
recording another  
The desired recording speed is  
selected in SP (standard play) or  
SLP (super long play) mode by  
pressing REC SPEED button on  
the remote control.  
1) While you are recording on  
the unit, pressVIDEO/TV but-  
ton.  
2) At the cable box or satel-  
lite box, select the channel  
you want to view.  
If you have connected the unit to  
a cable box or satellite box, refer  
to “Connection to a Cable Box  
or Satellite Box” section on page  
14.  
If OTR is finished inVCR during  
playback or REC mode in DVD, the  
VCR will be in STOP mode and the  
DVD keeps the current mode.  
2
Recording speed:  
Tape speed  
Type of tape  
SP mode  
Recording/PlaybackTime  
Press STOP button when the  
recording is completed.  
T60  
T120  
2hours  
6hours  
T160  
2-2/3hours  
8hours  
1hour  
3hours  
SLP mode  
Accidental erasure prevention  
To prevent accidental recording  
on a recorded cassette, remove  
its record tab.To record on it  
later, cover the hole with cello-  
phane tape.  
•
Stereo or SAP is selected.  
Record tab  
•
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR functions  
Recording and One-touch timer recording (cont’d)  
One-touch timer recording  
VCR  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
This feature allows you to set the  
recording length simply by pressing  
REC/OTR button on the remote  
control or the front panel of the unit.  
(0:30)  
(1:00)  
(Normal recording)  
(8:00)  
.@/:  
1
ABC  
2
DEF  
3
(7:30)  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
When one-touch timer recording  
is finished, the unit will turn off  
automatically.  
SPACE  
0
VCR  
First:  
DISPLAY  
VCR  
DVD  
PAUSE  
1
PLAY  
To cancel the one-touch timer  
recording within the specified  
time, press STOP C button.  
STOP  
During normal recording,  
press REC/OTR button to  
begin one-touch timer  
recording.  
1
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
You can select a fixed recording  
time by pressing the REC/OTR  
button repeatedly.  
CM SKIP  
MODE  
Search  
Index search  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
VCR  
.@/:  
1
ABC  
2
DEF  
3
3
An index mark will be assigned at  
the beginning of each recording  
you make.You may skip to a specif-  
ic marked point by following the  
steps below.  
CH  
GHI  
4
JKL  
5
MNO  
6
2
1
Press g/h buttons to  
start index search.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
If you want to go in the forward  
direction, press g button.  
If you want to go in the reverse  
direction, press h button.  
After index search, theVCR will  
play the tape automatically.  
DISPLAY  
VCR  
DVD  
PAUSE  
3
VCR  
First:  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
SKIP  
REC MONITOR  
Press SEARCH MODE button  
so that the index search  
menu appears.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
2
Enter the number of record-  
ings you wish to skip using  
Number buttons with in 30  
seconds.  
Note  
INDEX SEARCH  
03  
• Every time a tape is recorded,  
an index mark is written on  
the tape.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR functions  
Search (cont’d)  
Time search  
VCR  
TIME SEARCH  
2:50  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
This feature allows you to go to a  
specific point on a tape by entering  
the exact amount of time you wish  
to skip in order to reach the  
point.  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
2
1
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
VCR  
First:  
3
3
PLAY  
Press g/h buttons to  
start time search.  
STOP  
1
REC/OTR  
SETUP  
TIMER PROG.  
Press SEARCH MODE button  
repeatedly so that theTime  
search menu appears.  
If you want to go in the forward  
ENTER  
SKIP  
REC MONITOR  
direction, press  
If you want to go in the reverse  
direction, press button.  
After time search, the unit will play  
the tape automatically.  
g
button.  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
h
CM SKIP  
MODE  
2
Enter your desired time to  
skip using Number buttons  
with in 30 seconds.  
Note  
• These functions are not avail-  
able during recording.  
• Press STOP button to stop the  
search.  
•
If the end of the tape is reached  
during a Search, this unit will cancel  
the search and rewind the tape.  
Other operations  
VCR  
VCR  
First:  
To cue or review picture during playback (Picture Search):  
Press g/h buttons during playback.  
Press it again and the unit will search in super high speed. (in the SLP  
mode only)  
To freeze the picture onTV screen during playback (Still mode):  
Note  
Press PAUSE F button. Each time you press the button, the picture will  
be forwarded by one frame.  
• Still/Slow/Pause mode will be  
automatically cancelled after 5  
minutes to prevent damage to  
the tape and the video head.  
• To return to playback from  
the Picture Search/Still/Slow  
mode, press PLAY button.  
If the picture begins to vibrate vertically during the still mode, stabilize  
the picture by pressing the CHANNEL K/L or CHK/CHL buttons.  
If the picture is distorted or rolling vertically, adjust the vertical hold  
control on your TV, if equipped.  
Counter Reset:  
Press CLEAR/C-RESET button.  
To playback in slow motion:  
Your Selection  
Hi-Fi  
R-channel  
MONO  
Monaural  
L+R  
Press SLOW  
button during playback or the still mode.  
L-channel  
Type of recorded tape  
If the noise bars appear on the TV screen, you can reduce it by pressing  
non Hi-Fi tapes  
Monaural  
Monaural  
CHANNEL K/L or CHK/CHL buttons.  
Hi-Fi tapes  
recorded in  
Hi-Fi stereo  
L
R
Hi-Fi tapes  
recorded main  
audio program  
When you playback a tape recorded in Hi-Fi stereo:  
Main audio  
program  
Main audio  
program  
Main audio  
program  
Press AUDIO button on the remote control to select Hi-Fi or MONO  
Hi-Fi tapes  
recorded second  
audio program  
Second audio Second audio Second audio  
program program program  
for playback sound mode.  
• If you have connected a stereo TV to this unit, select “Hi-Fi”.  
• If you have connected a monaural TV to this unit, select “MONO”.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting  
Before requesting service for this unit, check the table below for a possible cause of the problem you are  
experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and  
restore proper operation.  
Symptom  
Power  
Remedy  
The power does not turn on.  
• Check that the AC power cord is connected securely.  
Picture  
• Re-connect the connecting cord securely.  
• The connecting cords are damaged.  
There is no picture.  
• The Setup Display appears. Press RETURN  
off the display.  
button to turn  
• Check the connection to yourTV (page 13).  
• Check the RF output channel when you view aTV program  
using RF connection.  
• Check if the INTERLACE/PROGRESSIVE mode is set correctly  
according to yourTV. See page 13.  
• Switch the input selector on yourTV (such as to "LINE1") so  
that the signal from this unit appears on theTV screen.  
• The disc is dirty or flawed.  
Picture noise appears.  
• Head cleaning forVCR may be necessary.  
Refer to “AUTO HEAD CLEANING”.  
•
If the picture output signal from the unit passes through yourVCR  
to get to yourTV, or if you are connected to a combination  
TV/VIDEO player, the copy-protection signal applied to some DVD  
programs could affect picture quality. If you still experience this  
problem even when you connect the unit directly to yourTV, try  
connecting the unit to yourTV's S-VIDEO input.  
• Adjust tracking control for better picture by pressing  
CHANNEL (o /p) buttons on this unit or CH (o /p)  
buttons while you are playing a video tape.  
• Try to set the channels with "Auto Preset" in SETUP menu  
(page 18).  
TV program reception does not fill the  
screen.  
•
Select a channel of anyTV program using the CH  
o
/
p
buttons.  
• PressVIDEO/TV button if necessary.  
• AdjustTV antenna.  
TV program pictures are distorted.  
• Adjust the picture (see theTV's instruction manual).  
• Place the unit andTV farther apart.  
• Place theTV and any bunched antenna cables farther apart.  
• Switch the input toTV.  
• Connect the antenna cable correctly (page 13).  
TV channels cannot be changed.  
• If the playback picture output from a DVD player,VCR, or tuner  
goes through the unit before reaching yourTV, the copy-  
protection signal applied to some programs could affect picture  
quality. Disconnect the playback equipment in question and  
connect it directly to yourTV.  
The playback picture orTV program from  
the equipment connected through the  
unit is distorted.  
Sound  
There is no sound.  
• The disc is dirty or flawed.  
• Re-connect all connections securely.  
• The connecting cord is damaged.  
• Check the connections to the amplifier input.  
• The input source setting on the amplifier is incorrect.  
• The unit is in pause mode or in Slow-motion Play mode.  
• The unit is in fast forward or fast reverse mode.  
• If the audio signal does not come through the DIGITAL OUT  
(COAXIAL) jack, check the Audio Setup settings (pages 90-91).  
• The disc is dirty or flawed.  
• When playing a DTS-CD, noise may come from the speakers.  
This unit is not compatible with DTS-CD.  
Sound is noisy.  
• This unit is not compatible with DTS sound.  
No DTS sound is output  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting (cont’d)  
Remedy  
Symptom  
Playback  
• No disc is inserted.  
The disc does not play.  
• A blank disc is inserted.  
• No cassette tape is inserted.  
•
The disc is upside down. Insert the disc with the labeled side facing up.  
• The disc is not correctly inserted.  
• The unit cannot play certain discs (such as a CD-ROM) (page  
43).  
• The region code on the DVDVIDEO does not match the unit  
(page 43).  
• Moisture has condensed inside the unit. Remove the disc and  
leave the unit turned on for about half an hour until the  
moisture evaporates (page 4).  
• If the disc was recorded on another recorder, the unit cannot  
play the disc if it was not finalized (page 41).  
The disc does not start playback from the • Resume play was activated (page 48). Press STOP C button  
beginning.  
twice.  
• You have inserted a disc whoseTitle menu or DVD menu  
automatically appears on theTV screen when it is first insert.  
The unit starts playing from the disc  
automatically.  
• The DVDVIDEO features an auto playback function.  
Some functions such as Stop, Search, or  
Slow-motion Play cannot be performed.  
•
Depending on the disc, you may not be able to do some of the  
operations above. See the instruction manual supplied with the disc.  
• Multilingual tracks are not recorded on the DVDVIDEO,  
DVD-R or DVD-RW being played.  
• The DVDVIDEO prohibits the changing of the language for the  
sound track.  
• Try changing the language using the DVDVIDEO's menu.  
The language for the sound track cannot  
be changed.  
The subtitle language cannot be changed  
or turned off.  
• Multilingual subtitle are not recorded on the DVDVIDEO.  
• The DVDVIDEO prohibits changing of the subtitles.  
• Try changing the subtitle using the DVDVIDEO's menu.  
• Multi-angles are not recorded on the DVDVIDEO being played.  
• You are trying to change the angles when  
appear on theTV screen (page 58).  
• The DVDVIDEO prohibits changing angles.  
• Try changing the angle using the DVDVIDEO's menu.  
The angles cannot be changed.  
icon does not  
Recording/Timer recording/Editing  
The channel cannot be changed from the  
channel you are recording.  
• Set theTV's input to "TV."  
Recording does not start immediately  
after you press REC/OTR button.  
• An unused DVD-R or DVD-RW was inserted. It takes a while  
for the unit to automatically format a DVD-RW.  
• Make sure the tape has a safety tab when you record to a  
cassette tape. If needed, cover the hole with cellophane tape.  
•There was a power failure during recording.  
• The units internal clock stopped due to a power failure that  
lasted for more than 30 seconds.  
Nothing was recorded even though you  
set the timer setting correctly.  
Reset the clock (pages 22-23).  
• Disconnect the AC power cord from the AC outlet, and  
connect it again.  
•
The program contains copy protection signals that restricts copying.  
• The timer setting overlapped with another setting that was set  
later or has priority.  
Recording does not stop immediately  
after you press STOP C button.  
• It will take a few seconds for the unit to input disc data before  
recording can stop.  
Timer recording is not complete or did  
not start from the beginning.  
• The timer setting overlapped with another setting that was set  
later or has priority (page 36).  
• Disc space was not enough.  
Timer recording is impossible.  
•
Make sure indicator appears on the front display of this unit. If not,  
press POWER button.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Troubleshooting (cont’d)  
Remedy  
Symptom  
Remote control  
The remote does not function.  
• Batteries are weak.  
• There are obstacles between the remote and the unit.  
• The remote is far from the unit.  
• There are no batteries in the remote.  
• Turn on the unit.  
• The remote is not pointed at the remote sensor on the unit.  
•
Press the DVD orVCR button, whichever you need.Then, try again.  
• Check if a cassette tape is in this unit.  
Others  
The unit does not operate properly.  
• When static electricity, etc., causes the unit to operate  
abnormally, unplug the unit and then plug it in again.  
The disc tray does not open when you  
press OPEN/CLOSE A button.  
• It may take a few seconds for the disc tray to open after you  
have recorded or edited a disc.  
• This is because the unit is adding disc data to the disc.  
Error message  
Cause  
Solution  
Disc Error  
--- Please eject the disc. ---  
Playback feature may not be  
available on this Disc.  
Unplayable disc is inserted  
in the unit.  
Insert the standardized disc which  
bear the marks on page 43.  
Region Error  
Playback is not authorized  
in the region of the DVD-Video  
disc which you inserted in the unit.  
Insert the DVD-Video disc with  
region codes 1 or ALL.  
--- Please eject the disc. ---  
Playback is not authorized in your  
region.  
Parental Lock On  
--- Please eject the disc. ---  
The current selected parental level  
Prohibits playback.  
The current selected parental  
level in the SETUP Menu  
prohibits playback.  
Check the "Parental Lock" setting  
(pages 92-93).  
Recording Error  
The recording function encountered  
the copy prohibited program.  
You cannot record copy prohibited  
programs.  
This program is not allowed  
to be recorded.  
Recording Error  
This program is not  
recordable inVideo mode.  
You are trying to record the copy-  
once program onto the DVD-RW  
disc inVideo mode.  
Set "DVD-RW Recording Format"  
to "VR mode" (page 28).  
Recording Error  
You are trying to record onto the  
disc which is unrecordable, or the  
disc status is unable to record.  
Insert the recordable disc, and  
ensure the disc status is satisfied  
with recording (pages 26-42).  
Can not record on this disc.  
Recording Error  
You are trying to record the copy-  
once program onto the DVD-RW  
disc which is not compatible with  
CPRM.  
Insert the DVD-RW disc  
(ver.1.1 compatible with CPRM).  
This program is not allowed to  
be recorded on this disc.  
Recording Error  
You are trying to record on to the  
protected disc which is set in the  
Disc Setting Menu.  
Release the disc protect setting  
in the Disc Setting menu (page 42).  
This disc is protected and not  
recordable.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
RF converter output  
You can watch the TV programs with the tuner of the  
unit. (Usually channel 3 or 4 of the TV is available for  
the RF converter setting.) Be sure to connect the  
unit to a TV using the RF cable. Refer to page 13.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
2  
1
SPACE  
0
Select channel 3 on yourTV.  
DISPLAY  
VCR  
DVD  
PAUSE  
• Be sure that the unit is in DVD mode.  
PLAY  
STOP  
2
REC/OTR  
SETUP  
TIMER PROG.  
PressVIDEO/TV button on the remote con-  
trol.  
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
• If noise appears, change the RF output channel of  
the unit to CH 4 by pressingVIDEO/TV button for  
3 seconds.The RF output channel will alternate  
between CH3 and CH4 as follows.  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
1
2
3
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
for more than  
3 seconds  
3 seconds  
(
(
(
)
RF ON CH4  
3 seconds  
)
RF ON CH3  
3 seconds  
)
RF ON CH4  
3 seconds  
•
Changing the RF output channel is available only  
when the unit is in DVD mode.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Language code  
Language  
Code  
Language  
Code  
Language  
Code  
(Afan) Oromo  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
6159  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
Hindi  
5455  
5467  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
5861  
5847  
5868  
5860  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6149  
6164  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
Russian  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
Singhalese  
Siswat  
Slovak  
Slovenian  
Somali  
Spanish  
Sundanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
6467  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean  
Kurdish  
Laothian  
Latin  
Latvian; Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Occitan  
Oriya  
Panjabi  
Pashto; Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance  
Romanian  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Yiddish  
Yoruba  
Zulu  
Hebrew  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Glossary  
Digital audio  
Analog audio  
Playlist  
An electrical signal that directly  
represents sound. Compare this  
to digital audio which can be an  
electrical signal, but is an indirect  
representation of sound. See also  
Digital audio.  
An indirect representation of  
sound by numbers. During record- tents of a disc as your desired  
From this list you can play con-  
ing, the sound is measured at dis-  
crete intervals (44, 100 times a  
second for CD audio) by an ana-  
log-to-digital converter, generating  
a stream of numbers. On playback,  
a digital-to-analog converter gen-  
erates an analog signal based on  
these numbers. See also Sampling  
frequency and Analog audio.  
order or in sequence.Also it is  
allowed to search a specific scene  
directly.  
Regions code  
Aspect ratio  
Regions associate discs and play-  
ers with particular areas of the  
world.This unit will only play discs  
that have compatible region  
codes.You can find the region  
code of your unit by looking on  
the rear panel. Some discs are  
compatible with more than one  
region (or all regions).  
The width of a TV screen relative  
to its height. Conventional TVs are  
4:3 (in other words, the screen is  
almost square); widescreen models  
are 16:9 (the screen is almost  
twice as wide as it is high).  
Dolby Digital  
The system to compress digital  
sound developed by Dolby  
Laboratories. It offers you sound  
of stereo(2ch) or multi-channel  
audio (up to 5.1ch).  
Chapter  
Just as a book is split up into sev-  
eral chapters, a title on a DVD  
disc is usually divided into chap-  
ters. See also Title.  
Sampling frequency  
The rate which sound is measured  
by a specified interval to turn into  
digital audio data.The numbers of  
sampling in one second defines as  
MP3 (MPEG Audio Layer 3)  
MP3 is a method of compressing  
files.You can copy MP3 files on  
CD-R/RW discs from the comput- sampling frequency.The higher the  
Component video output  
Each signal of luminance(Y) and  
component(PB/CB, PR/CR) is inde-  
pendent to output so that you can  
experience picture color as it is.  
Also, due to compatibility with  
er and play the files on this unit.  
rate, the better the sound quality  
as possible as it is.  
Finalize  
SAP  
To make DVD discs, which have  
(Secondary Audio Program)  
progressive video (525p/480p), you been recorded on, possible to play  
can experience higher-density pic-  
ture than that in interlace  
(525i/480i).  
in DVD players.With this unit, it is Sub-audio channel which is deliv-  
possible to finalize DVD-R/DVD-  
RW discs.  
ered separately from main-audio  
channel.This audio channel is used  
as an alternate in bilingual broad-  
casting.  
CPRM  
(Content Protection for  
Recordable Media)  
PCM  
(Pulse Code Modulation)  
S-Video output  
The most common system of  
encoding digital audio, found on  
CDs and DAT. Excellent quality,  
but requires a lot of data com-  
pared to formats such as Dolby  
Digital and MPEG audio. For com-  
patibility with digital audio  
CPRM is a copy protection sys-  
tem with scramble system regard-  
ing the recording of “copy-once”  
broadcast programs (e.g. some  
satellite broadcasts).  
It delivers independently each sig-  
nal of color(C) and luminance(Y)  
to TV as video signals, so that  
higher-quality picture will be  
gained.  
Title (DVD only)  
recorders (CD, MD and DAT) and  
AV amplifiers with digital inputs,  
this unit can convert Dolby Digital  
and MPEG audio to PCM. See also  
Digital audio.  
A collection of chapters on DVD  
disc. See also chapter.  
Track  
Audio CDs use tracks to divide  
up the content of a disc.The DVD  
equivalent is called a chapter. See  
also Chapter.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
Specifications  
General  
System  
DVD-Video, DVD-R/RW,Audio CD,Video CassetteTape  
VCR video heads  
Power requirements  
Power consumption  
Weight  
Four heads  
AC120V, 60 Hz  
37W (standby: 4.3W)  
9.5 lbs ( 4.3 kg )  
Dimensions (width x height x depth)  
Operating temperature  
Operating humidity  
TV format  
17 1/8" x 3 15/16" x 10 1/4" (435 x 100 x 261 mm)  
41Fº to 104Fº (5ºC to 40ºC)  
5% to 85% (no condensation)  
NTSC  
Tuner  
Receivable channels  
VHF  
2-13ch  
UHF  
CATV  
14-69ch  
C1-C125ch  
RF Converter  
Converter output  
Built-inVHF converter  
VHF channel 3 or 4  
Note:  
The specifications and design of this product are subject to change without notice.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Fácil grabación de DVD  
Estas instrucciones le ayudarán a entender fácilmente cómo grabar discos DVD.  
Nota:  
Asegúrese que las pilas están en el mando a distancia y que ha conectado correctamente esta unidad y el TV.  
Paso 1: Elija un tipo de disco  
Paso 2:Coloque un disco en blanco  
Mando a distancia  
Hay varias tipos de discos DVD grabables a su  
elección. Elija el tipo según "Tipos de disco DVD"  
en esta página.  
Este grabador de DVD puede grabar en los sigu-  
ientes tipos de disco.  
2
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Para abrir  
.@/:  
1
ABC  
2
DEF  
3
1
Para  
CH  
GHI  
JKL  
MNO  
encender  
Por ejemplo, cuando desea grabar repetidamente  
en el mismo disco o cuando desea editar el disco  
después de grabar, seleccione el disco de tipo  
regrabable DVD-RW.  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
Para cerrar  
3
.@/:  
1
ABC  
2
DEF  
3
CH  
GHI  
JKL  
MNO  
Cuando desea guardar grabaciones sin alterarlos,  
un DVD no regrabable DVD-R puede ser más  
conveniente.  
Cargando  
Esta operación puede  
demorar en reconocerse.  
Tipos de disco DVD  
Formato del disco  
.
Coloque el disco en el  
: Más adecuado  
: Puede utilizar  
:
Algunas funciones son limitadas  
: No puede utilizar  
DVD-RW Video  
DVD-R  
grabador. Haga el formato del  
disco del menú SETUP, exis-  
ten los formatos de video  
(modo deVideo) o de  
grabación de video (modo  
VR) según el tipo de disco  
colocado. Esto es necesario  
para preparar el disco para  
grabación.Vea los detalles en  
las páginas 28-30.  
Desea  
Grabar programas deTV  
DVD-RW VR  
Volver a utilizar borrando partes no deseadas  
Editar las grabaciones  
Editar/grabar de equipos conectados  
Copiar discos para distribución  
Reproducir en otro equipo de DVD  
*1  
*1  
Detalles  
Grabación  
¿Regrabable?  
DVD-RW VR  
DVD-RW Video  
DVD-R  
Sí  
Sí  
Sí  
Sí  
Sí  
Sí  
Sí  
No  
Sí  
Puede crear capítulos a intervalos fijos (auto.)  
Puede crear capítulos donde desee (manual)  
Puede grabar imágenes de tamaño 16:9  
No  
Sí  
No  
Sí  
Puede grabar un programa de Copia-una-vez  
No  
No  
Edición  
Puede hacer funciones de edición básica  
Sí  
Sí  
Sí  
Sí  
Puede hacer funciones de edición avanzadas (edición de lista a reproducir)  
No  
No  
*1  
El DVD-RW (modoVR) sólo puede reproducirse  
en equipos de DV compatibles conVR.  
Nota:  
Para más detalles sobre las funciones anteriores y las  
limitaciones implícitas, lea las explicaciones en este manual.  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Fácil grabación de DVD (cont.)  
Paso 3: Seleccione la  
velocidad de  
Paso 4: Seleccione  
el canal  
Paso 5: Grabe en  
discos  
grabación  
Para seleccionar el  
deseado  
DVD  
PQRS  
7
TUV  
WXYZ  
VIDEO/TV  
8
9
1
SPACE  
0
SLOW  
modo DVD  
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
DISPLAY  
VCR  
DVD  
PAUSE  
.@/:  
1
ABC  
2
DEF  
3
GHI  
4
JKL  
5
MNO  
6
E  
POWER  
2
REC SPEEDIO  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
REC/OT
SETUP  
TIMER PROG.  
RETURN  
.@/:  
1
SPACE  
0
ABC  
2
DEF  
3
ENTER  
REC MONITOR  
CH  
GHI  
4
JKL  
5
MNO  
6
DISPLAY  
VCR  
DVD  
PAUSE  
MENU/LIST TOP MENU  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/T
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
1
CH 1  
Para seleccionar la  
2
velocidad de grabación  
SP 2:01 Rem.  
I
Sugerencia 1: Reproduzca el contenido grabado  
Puede seleccionar el título que desea reproducir de un menú indicado y empiece  
a reproducir inmediatamente. Las grabaciones pueden verse fácilmente en un  
disco, el procedimiento es simple ya que  
Paso 6: Pare la  
grabación  
Parada grab.  
sólo tiene que elegir el título en un capí-  
Inicio de grab.  
Parada/inicio  
tulo de la pantalla del menú.  
¿Qué son títulos y capítulos?  
La grabaciones del disco DVD se divi-  
den generalmente en títulos. Los títulos  
pueden subdividirse en capítulos.  
SPACE  
0
SLOW  
Título 1  
Título 2  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
STOP  
Capítulo 1 Capítulo 2 Capítulo 3 Capítulo 1 Capítulo 2  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
REC MONITOR  
Sugerencia 2: Edite el disco grabado  
La edición de discos puede ser muy fácil y el grabador de DVD ofrece conve-  
nientes funciones de edición posibles sólo con los DVD-R/RW.  
Puede editar lo siguiente de la lista de títulos.  
58%  
Escrit de datos  
• Poniendo nombres en títulos  
• Seleccionando imágenes para índices (modoVR)  
• Seleccionando/borrando marcadores de capítulos  
• Borrando partes de títulos (modoVR)  
Original y Playlist (modoVR)  
Puede editar las grabaciones en la lista a reproducir sin cambiar las grabaciones  
originales. Cualquier lista a reproducir no ocupa mucho espacio en el disco.  
¿Qué significa "Original" o "Playlist"?  
A lo largo de este manual encontrará Original y Playlist que se refieren a las  
grabaciones reales y la versión editada.  
• La grabación Original se refiere a la grabación real en el disco.  
• El Playlist se refiere a la versión editada del disco; cómo se va a reproducir  
la versión Original.  
Esta operación puede  
demorar en comple-  
tarse.  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Reproducción con videograbadora  
VCR  
3
OPEN/CLOSE  
POWER  
REC SPEED AUDIO  
1
Durante la reproducción, pre-  
1
.@/:  
1
ABC  
2
DEF  
3
Presione el botón POWER en  
el mando a distancia o el  
panel frontal de la unidad.  
Cuando reproduzca una cinta,  
conecte el TV y asegúrese de  
seleccionar la entrada donde se  
conecta la unidad.  
sione el botón PAUSE F.  
Se hará una pausa de reproduc-  
ción y se silenciará el sonido.  
CH  
GHI  
4
JKL  
5
MNO  
6
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
SPACE  
0
DISPLAY  
VCR  
DVD  
PAUSE  
4
3
5
PLAY  
Presione el botón PLAY  
B
2
4
STOP  
VCR  
para continuar la reproduc-  
ción.  
Presione:  
REC/OTR  
SETUP  
TIMER PROG.  
ENTER  
REC MONITOR  
2
5
Coloque una cinta pregraba-  
da y presione el botón PLAY  
Nota  
Presione el botón STOP  
C
para detener la reproducción.  
B para empezar la reproduc-  
• Cuando se coloca una cinta  
ción.  
sin la lengüeta de grabación, la  
unidad empezará a reproducir  
automáticamente.  
6
Presione el botón  
• El seguimiento se ajustará  
automáticamente para la  
reproducción. Para ajustar  
manualmente el seguimiento,  
presione los botones CHAN-  
NEL K/L en el panel frontal  
de la unidad o los botones  
CHK/CHL en el mando a  
distancia.  
STOP/EJECT  
frontal de la unidad para  
expulsar la cinta.  
C
A en el panel  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Grabación y grabación con temporizador de un toque (VCR)  
Grabación  
CH  
GHI  
4
JKL  
5
MNO  
6
VCR  
Primero:  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
VCR  
SPACE  
0
Antes de grabar, asegúrese de que:  
DISPLAY  
VCR  
DVD  
PAUSE  
•
Se seleccionó el canal deseado  
presionando los botones numéri-  
cos en el mando a distancia o  
botones CHANNEL K/L en el  
panel frontal de la unidad.  
Hay una cinta con la lengüeta  
para grabación intacta en la  
unidad.  
Se seleccionó la velocidad de  
grabación deseada en SP (repro-  
ducción estándar) o SLP (repro-  
ducción de super larga duración)  
presionando el botón REC  
SPEED en el mando a distancia.  
1
1
2
Presione el botón REC/OTR  
para empezar la grabación.  
Para detener temporalmente la  
grabación o continuarla, presione  
PLAY  
STOP  
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
REC MONITOR  
•
•
el botón PAUSE F. Después de  
que la unidad haya estado en el  
modo de pausa durante 5 minu-  
tos, se detendrá automáticamente  
para proteger al cinta y el cabezal  
de video contra cambios.  
Nota  
• Para ver un canal mientras  
graba en otro  
1) Mientras está grabando en  
la unidad, presione el botón  
VIDEO/OTR.  
2) En la caja de cable o caja  
de satélite, seleccione el canal  
que desea ver.  
Si se conectó la unidad a una  
caja de cable o caja de satélite,  
consulte la sección de  
"Conexión a una caja de cable  
o caja de satélite" en la página  
14.  
Si se termina el OTR en la  
videograbadora durante el  
modo de reproducción o REC  
en DVD, la videograbadora  
estará en el modo STOP y la  
DVD se mantiene en el modo  
actual.  
2
Velocidad de grabación:  
Presione el botón STOP  
cuando se complete la  
grabación.  
Velocidad  
de la cinta  
Tiempo de  
grabación/reproducción  
Tipo de cinta  
Modo SP  
T60  
T120  
T160  
1 hora  
2 horas 2-2/3 horas  
Modo SLP  
3 horas  
6 horas  
8 horas  
Prevención contra borrado accidental  
Para evitar una grabación por  
accidente en un casete grabado,  
rompa la lengüeta de grabación.  
Para volver a grabar posterior-  
•
Se selecciona Estéreo o SAP.  
Lengüeta de  
grabación  
mente, cubra el orificio con  
cinta adhesiva.  
•
Grabación con temporizador de un toque  
VCR  
OPEN/CLOSE  
POWER  
Esta función permite seleccionar  
la longitud de la grabación simple-  
mente presionando el botón  
REC/OTR en el mando a distancia  
REC SPEED AUDIO  
(0:30)  
(1:00)  
(Canal a grabar)  
.@/:  
1
ABC  
2
DEF  
3
(8:00)  
(7:30)  
CH  
GHI  
4
JKL  
5
MNO  
6
Cuando termina la grabación con  
temporizador de un toque, la  
unidad se desconectará automáti-  
camente.  
PQRS  
7
TUV  
8
WXYZ  
9
VIDEO/TV  
SLOW  
o en el panel frontal de la unidad.  
SPACE  
0
VCR  
Primero:  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
1
Para cancelar la grabación con  
temporizador de un toque dentro  
del tiempo especificado, presione  
el botón STOP C.  
STOP  
1
Durante la grabación normal,  
presione el botón REC/OTR  
para empezar la grabación  
con temporizador de un  
toque.  
REC/OTR  
SETUP  
TIMER PROG.  
1
ENTER  
SKIP  
REC MONITOR  
MENU/LIST TOP MENU  
RETURN  
SKIP  
CLEAR/C-RESET ZOOM  
SEARCH  
CM SKIP  
MODE  
Puede seleccionar un tiempo de  
grabación determinado presionan-  
do repetidamente el botón  
REC/OTR.  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in mate-  
rials or workmanship as follows:  
DURATION:  
PARTS:  
LABOR:  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year  
from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are  
excluded from this warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the  
date of original retail purchase.  
LIMITS AND EXCLUSIONS:  
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of origi-  
nal retail purchase will be required together with the product to obtain service under this warranty.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,  
missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty  
does not apply to any product not purchased and used in the United States.  
This product is produced for home use and this warranty only covers failures due to defects in material or  
workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or fail-  
ures which are caused by repairs, alterations or product not supplied by FUNAI CORP., or damage which  
results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper  
maintenance, commercial use such as hotel, rental or office use of this product or damage which results  
from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT  
REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR  
MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY  
THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF  
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART  
OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS  
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST  
BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID WHEN  
THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY.  
IMPORTANT:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS  
THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE  
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT  
FUNAI CORP.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
To locate your nearest SYLVANIA Authorized Service Center or for general service pro-  
cedure, please call 1-800-968-3429 or write to the following:  
FUNAI CORPORATION, INC.  
SERVICE CENTER  
19900 Van Ness Avenue, Torrance, CA 90501  
Tel :1-800-968-3429  
http://www.funai-corp.com  
Head Office: 100 North Street, Teterboro, NJ 07608  
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.  
0VMN04183 / E9410UD ★★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in China  

Shark Vacuum Cleaner EP730 User Manual
Sharp Flat Panel Television LC 46D62U User Manual
Sharp VCR VC H705X User Manual
Sony Music Mixer UP 20 series User Manual
Sony Speaker XSL101P5S User Manual
Sylvania Computer Monitor 6842PF M User Manual
Sylvania Speaker System SR 748 User Manual
Tally Genicom Printer T2145 User Manual
Tanaka Brush Cutter TBC 200 User Manual
Tanaka Trimmer TBC 280 User Manual