Owner’s Manual
Please read before using this equipment.
DVD/CD Player with Video Cassette Recorder
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
DVC840E
Table of Contents
Precautions
Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
■ Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4
Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4
About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Notice for progressive scan outputs . . . . . . . . . . . . . . . . . . . . . . 4
Symbol Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setup
■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5
Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8
■ VCR/DVD Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ Preset for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10
Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Supplied Accessory
• Remote control
(NB100UD or NB150UD)
with two AA batteries
• RF cable
(WPZ0901TM002)
VCR Functions
■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . 11
■ Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
■ On-Screen Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
■ Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Hint for Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
■ Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Time Search / Index Search / Auto Repeat . . . . . . . . . . . . . . . . 14
• Audio/Video cables
(WPZ0102TM015 or
WPZ0102LTE01)
• Owner’s Manual
(0VMN04013)
Owner's Manual
DVD Functions
■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
■ MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■ The On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17
■ Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
■ Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18
Repeat Playback / Repeat A-B Playback /
Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18
■ Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Subtitle Language / Audio Language / Camera Angle /
Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . 19
■ DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
To return the All Selections of SET UP (except for PARENTAL) to the Default Setting 22
If you need additional operating assistance after
reading this owner’s manual or to order replace-
ment accessories, please call
TOLL FREE : 1-800-968-3429
Information
■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
■ Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Basic TV Connection
(Back of
Cable
Signal
Antenna
or
Cable
Signal
Antenna
or
DVD/VCR)
(Back of TV)
AC
outlets
(Back of TV)
4
ANT-IN
Plug in
2
ANT-OUT
Disconnect
3
From
Connect
DVD/VCR
Connect
From
TV
RF Cable (supplied)
Please refer to "Connections" on page 5.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
1. Read Instructions - All the safety and operating instruc-
tions should be read before the appliance is operated.
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes, and
requirements for the grounding electrode. (Fig. A)
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
FIGURE A
ANTENNA
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
LEAD
WIRE
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
cleaners. Use
a
damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the
possibility of the loss of an authorization code for a CATV
converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description
otherwise required in item 5.
6. Attachments - Do not use attachments not recommended
by the video product manufacturer as they may cause haz-
ards.
7. Water and Moisture- Do not use this video product near
water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swim-
ming pool, and the like.
8. Accessories - Do not place this video product on an unsta-
ble cart, stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult, and seri-
ous damage to the appliance. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufactur-
er, or sold with the video product. Any mounting of the
appliance should follow the manufactur-
er's instructions and should use a
mounting accessory recommended by
the manufacturer. An appliance and cart
combination should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli-
ance and cart combination to overturn.
9. Ventilation - Slots and openings in the cabinet are provid-
ed for ventilation and to ensure reliable operation of the
video product and to protect it from overheating, and these
openings must not be blocked or covered. The openings
should never be blocked by placing the video product on a
bed, sofa, rug, or other similar surface. This video product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMP
NEC – NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. Lightning - For added protection for this video product dur-
ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall out-
let and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
15. Power Lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touch-
ing such power lines or circuits as contact with them might
be fatal.
16. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
18. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19. Damage Requiring Service - Unplug this video product
from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
video product.
10. Power Sources - This video product should be operated
only from the type of power source indicated on the mark-
ing label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
11. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug.
12. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience recepta-
cles, and the point where they exit from the appliance.
13. Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the video product, be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with regard to
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any
way.
f. When the video product exhibits a distinct change in per-
formance this indicates a need for service.
20. Replacement Parts - When replacement parts are
required, be sure the service technician has used replace-
ment parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other haz-
ards.
21. Safety Check - Upon completion of any service or repairs
to this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
22. Heat - This video product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
EN
–
–
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Location
Maintenance
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.
• Shield it from direct sunlight and keep it away from
sources of intense heat. Avoid dusty or humid
places. Avoid places with insufficient ventilation for
proper heat dissipation. Do not block the ventilation
holes on the sides of the unit. Avoid locations sub-
ject to strong vibration or strong magnetic fields.
SERVICING
¡Please refer to relevant topics on the Troubleshooting
Guide on page 23 before return the product.
¡When this unit become inoperative, do not try to cor-
rect the problem by yourself. There are no user-ser-
viceable parts inside.Turn off, unplug the power plug,
and please call our help line mentioned on the front
page to locate an Authorized Service Center.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild deter-
gent solution. Do not use a solution containing alco-
hol, spirits, ammonia or abrasive.
Avoid the Hazards of Electrical Shock and Fire
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center out. Do not wipe
in a circular motion.
¡
Do not use solvents such as benzine, thinner, commercial-
ly available cleaners, detergent, abrasive cleaning agents
or antistatic spray intended for analogue records.
• Do not put your fingers or objects into the DVD/VCR
cassette holder.
CLEANING THE DISC LENS
¡If this unit still does not perform properly although
you refer to the relevant sections and to “TROU-
BLESHOOTING GUIDE” in this Owner’s Manual, the
laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.
Moisture Condensation Warning
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. Do not use this unit at least for 2 hours
until its inside gets dry.
DISC HANDLING
¡Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
¡Always store the disc in its protective case when it is
not used.
About Copyright
Unauthorized copying, broadcasting, public perfor-
mance and lending of discs are prohibited.
This product incorporates copyright protection tech-
nology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
AUTO HEAD CLEANING
¡Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
¡Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accu-
mulated on the video heads after a long period of
use, or the usage of rental or worn tapes can cause
this problem. If a streaky or snowy picture appears
during playback, the video heads in your DVD/VCR
may need to be cleaned.
1. Please visit your local Audio/Video store and pur-
chase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line mentioned on the front page
to locate an Authorized Service Center.
Notice for progressive scan outputs
Consumers should note that not all high definition televi-
sion sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of
525 progressive scan picture problems, it is recom-
mended that the user switch the connection to the ‘stan-
dard definition’ output. If there are questions regarding
our TV set compatibility with this model 525p DVD play-
er, please contact our customer service center.
NOTES:
¡Remember to read the instructions along with the
video head cleaner before use.
¡Clean video heads only when problems occur.
Note to CATV system installer
Symbol Used in This Manual
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in par-
ticular, specifies that the cable ground should be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
The following symbols appear in some head-
ings and notes in this manual.
: Description refers to playback or recording
of video cassette tapes.
VCR
: Description refers to playback of DVD-Video
discs.
DVD-V
: Description refers to playback of Audio
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
CD
CDs.
: Description refers to playback of MP3 files.
MP3
EN
–
–
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
About the Video Cassettes and Discs
Playable Video Cassettes
Use only cassettes marked
with this unit.
Playable Discs
Recorded
signals
Playable
Mark (logo)
discs
Disc size
Region code
Disc types
DVD-Video
* 1,2,4,6
or
Example
12 cm
or
8cm
Title 1
Title 2
Digital video
(MPEG2)
DVD-R
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
DVD-RW
-
-
* 1,2,3,4,5,6
DVD+R
DVD+RW
* 1,2,3,4,5,6
Digital audio
MP3
Example
Audio CD
* 4,6
Track 1
Track 2
Track 5
Track 6
Track 6
Track 3
Track 4
Track 4
Digital audio 12 cm
-
or
or
Example
CD-R
Group 1
Group 2
MP3
8cm
CD-RW
Track 1
Track 3
Track 2
Track 5
* 4,5,6
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Only the discs which have been recorded in the video format and finalized can be played back.
Discs unfinalized or recorded in the video recording format cannot be played back.
Depending on the recording status of a disc, the disc may not be played back at all or normally
(the picture or sound may be not be smooth, etc.).
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special
properties of discs.
*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.
Even if they are played back, the sound or video quality will be compromised.
Unplayable Discs
¡
On the following discs, only the sound can be heard (picture cannot be viewed).
CDV
CD-G
¡
NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM
CD-I
Photo CD
Video CD
DVD with region codes other than 1 or ALL
DTS-CD
DVD-ROM for personal computers
CD-ROM for personal computers
¡
¡
On the following disc, the sound MAY NOT be heard.
Super Audio CD
Note: Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Any other discs without compatibility indications.
Connections
Please refer to “Basic TV Connection” on the front page before you use this unit.
RF Output Channel
If channel 3 is already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into this unit.
3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.
• If noise appears on the TV screen, press the VCR/TV button on the remote control.
4) Press the PLAY button once.
Hint
• The RF output channel may
not change when you adjust
tracking during playback. In
this case, stop the playback,
and start the playback again.
After that, press the PLAY
button on the DVD/VCR for 3
seconds again.
5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.
•
The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.
• When a picture does not appear on the TV screen, repeat step [4].
6) Press the STOP button to stop playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
–
–
5
Hint for Cable Box or Satellite Box
(Back of DVD/VCR)
(Back of DVD/VCR)
Connection B
Connection A
(Cable box or
Satellite box)
ANT-IN
ANT-IN
(Cable box or
Satellite box)
IN
ANT-OUT
OUT
Cable
Signal
E
ANT-OUT
E
IN
OUT
RF Cable
(supplied)
Cable
Signal
(Back of TV)
(Back of TV)
RF Cable (supplied)
RF Cable
Select this connection when you want to view or record a scram- Select this connection when you want to change channels on the
bled channel. With this connection, channels cannot be changed DVD/VCR. With this connection, you may watch one channel
on the DVD/VCR. You can view or record ONLY the channels you while recording another.
have selected on the cable box or the satellite box.
• While you are recording, only the recorded channel can be
viewed.
To select channels of the cable box or satellite box
1) Turn on the DVD/VCR by pressing the POWER button, and
• You may not view or record a scrambled channel.
To select channels of the cable box or satellite box
1) At the cable box or satellite box, select channel 3 or 4 (the
same channel as the DVD/VCR’s RF output channel.)
• Refer to “RF Output Channel”.
then, press the VCR/TV button.The “POWER” light on the front 2) At the TV, select the same channel as the output channel (3 or
panel will appear. Then, press the CHANNEL buttons to select 4) of the cable box or satellite box.
channel 3 or 4 (the same channel as the output channel of the 3) Turn on the DVD/VCR by pressing the POWER button, and
cable b ox or satellite box).
then, press the VCR/TV button. The “POWER” light on the front
panel will appear. Then, select the channel you want to view or
record.
To play back a tape
Follow the steps 1) to 2) above. Then, play back a tape.
• Refer to “Playback” on page 11.
• If you use the channel 4, you need to change the DVD/VCR’s
RF output to channel 4. Refer to “RF Output Channel”.
2) At the TV, select channel 3 or 4 (the same channel as you
have selected at step 1).
3) At the cable box or satellite box, select the channel you want to
view or record.
To view one channel while recording another
1) While you are recording on the DVD/VCR, press the VCR/TV but-
ton.
2) At the cable box or satellite box, select the channel you want to view.
Connection to an Audio System
Method 1
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Stereo system
Analog audio
input jacks
AUDIO
L
R
COAXIAL
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
Audio cable
(supplied)
DVD/VCR
AUDIO OUT
VCR
DVD
AUDIO S-VIDEO
OUT OUT
COMPONENT
DIGITAL
VIDEO OUT
DVD/VCR
DIGITAL
AUDIO OUT
AUDIO OUT
L
Y
(Analog)
AUDIO IN
VIDEO IN
L
AUDIO OUT
R
C
/
PB
C
B
COAXIAL
VIDEO OUT
R
PR
R
/
or
DVD
Note
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
OUT OUT
AUDIO OUT
• If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder, and set “DOLBY DIGITAL” to “ON” in the
AUDIO menu. (Refer to pages 20-21.)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
Y
L
C
/
/
PB
B
COAXIAL
R
C
PR
R
• Unless connected to a Dolby Digital decoder, set “DOLBY
DIGITAL” to “OFF” in the AUDIO menu. Playing a DVD
using incorrect settings may generate noise distortion, and
may also damage the speakers. (Refer to pages 20-21.)
• Set “DOLBY DIGITAL” to “OFF” in the AUDIO menu for con-
necting to an MD deck or DAT deck. (Refer to pages 20-
21.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality 5.1ch Dolby Digital
surround sound as heard in the movie theaters.
EN
–
–
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to a TV
Method 1
Method 2
Method 3
Basic Audio
Good picture
Better picture
Best picture
COMPONENT
VIDEO IN
TV
AUDIO IN
Y
S-VIDEO IN
VIDEO IN
L
R
CB
CR
S-Video
cable
(commercially
Video
cable
(supplied)
Audio cable
(supplied)
available)
Component
Video cables
(commercially
available)
DVD/VCR
AUDIO OUT
VCR
DVD
AUDIO S-VIDEO
OUT OUT
DVD/VCR
AUDIO OUT
VCR
DVD/VCR
COMPONENT
VIDEO OUT
Y
L
L
DVD
DVD/VCR
AUDIO OUT
VCR
AUDIO IN
VIDEO IN
COMPONENT
VIDEO OUT
AUDIO IN
DIGITAL
AUDIO S-VIDEO
L
AUDIO OUT
OUT
OUT
Y
L
AUDIO IN
VIDEO IN
L
R
C
PB/
R
B
R
CB/
PB
COAXIAL
VIDEO OUT
R
DVD
C
PR/
R
COMPONENT
VIDEO OUT
AUDIO S-VIDEO
VIDEO OUT
VIDEO OUT
VIDEO IN
R
OUT
OUT
Y
CR/
PR
L
C
PB/
B
or
VIDEO OUT
S-VIDEO OUT
DVD
R
N
T
DIGITAL
AUDIO S-VIDEO
OUT
OUT
AUDIO OUT
C
PR/
R
L
COMPONENT VIDEO OUT
C
COAXIAL
R
C
(Analog) AUDIO OUT
Note
•
Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
•
•
When progressive scanning mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
[DVD/VCR]
If your TV is compatible with 525p (480p) progressive scanning and you want to
enjoy that high quality picture;
VCR
DVD PROGRESSIVE SCAN
SKIP H STOP PLAY
G SKIP
You must select the connection Method 3 above and progressive scanning mode. To set the mode,
press and hold the PLAY button on the front panel for more than 5 seconds, so that PROGRESSIVE
SCAN indicator will light up. (The progressive scanning is not available in the VCR mode.)
If your TV is not compatible with progressive scanning;
REV
FWD
more than 5 seconds
[Interlace mode]
Use this unit in interlace mode. Make sure that no “P.SCAN” is on the display of this unit. If not, press
and hold the PLAY button on this unit for more than 5 seconds, so that PROGRESSIVE SCAN indi-
cator will light off.
[Progressive scanning mode]
Front & Rear Terminals
DVD ANALOG AUDIO OUT
jacks
DVD/VCR AUDIO OUT jacks
Connect the supplied audio
cables here through the audio
AUDIO IN jack
Connect audio cable coming
from the audio out jack of a
camcorder, another VCR, or an
audio source here.
ANT IN jack
Connect your antenna
or cable box here.
Connect the supplied audio
cables here through the Audio In jacks of a television or other
In jacks of a television or other audio equipment.
audio equipment. (DVD only)
ANT-IN
DVD
DVD/VCR
AUDIO OUT
VCR
POWER
COAXIAL jack
COMPONENT
VIDEO OUT
DIGITAL
AUDIO S-VIDEO
REW
F.FWD STOP/EJ
/
R
VCR
OUT
OUT
AUDIO OUT
Connect an optional coaxial
digital audio cable here
through the coaxial digital
audio in jack of a decoder or
audio receiver. (DVD only)
ANT-IN
Y
L
DIO IN
O IN
AUDIO IN
VIDEO IN
L
R
ANT-OUT
ANT-OUT
C
PB
/
/
B
COAXIAL
VIDEO OUT
R
[Front of
DVD/VCR]
C
PR
R
[Back of DVD/VCR]
S-VIDEO OUT jack
ANT OUT jack
Connect the
supplied RF
cable to the
antenna input
jack on your TV.
VIDEO IN jack
Connect an optional
S-Video cable here
through the S-video
in jack of a televi-
sion. (DVD only)
COMPONENT VIDEO
OUT jacks
DVD/VCR VIDEO OUT jack
Connect a cable com-
ing from the video out
jack of a camcorder,
another VCR, or an
audio-visual source
(laser disc player, video
disc player, etc.) here.
Connect the supplied yellow
Connect optional component video cable here through
video cables here through
the component video in
jacks of a television.
(DVD only)
the TV’s video in jack.
EN
–
–
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Remote Control and Front Panel
VCR mode
DVD mode
Disc/Tape
(BAulpthtaobnetical order)
Remote Control
DVD-V
CD
MP3
VCR
1
4
7
2
5
8
0
3
•To select channel.
•The +10 button has no effect
in VCR mode.
6
•
To select chapter or title directly. •To select track directly.
9
OPEN/CLOSE
+1 0
POWER
/EJECT
SPEED
AUDIO
•To search forward/backward
through a disc.
•To search forward/backward
•To forward/backward a tape.
1
4
7
2
5
8
3
6
9
•
To begin slow forward/reverse
playback during the pause mode.
through a disc.
SKIP/CH.
• To select an item
VCR/TV
SLOW
on the VCR Menu.
ENTER
•To move the cursor and
•To move the cursor and
• To advance to the next
VCR Menu.
determine its position.
determine its position.
0
VCR
+1 0
DVD
•
To go back one step during
DISPLAY
PAUSE
clock and timer setting.
A-B
•To repeat between your
•To repeat between your
chosen point A and B.
chosen point A and B. (CD)
PLAY
ANGLE
AUDIO
•To select camera angles on
STOP
a disc.
REC/OTR
MENU
•To select audio languages on •To select STEREO,
ENTER
a disc.
L-CH or R-CH. (CD)
•To clear the markers. (CD)
SETUP TOP MENU
RETURN
CLEAR/
C. RESET
•To clear the markers.
•To clear the numbers
entered incorrectly.
•To remove status No.
•To exit the VCR Menu.
SEARCH
MODE
CLEAR/
C. RESET
in program input.
MODE
V.SURR
ANGLE
•To reset the tape counter.
•To clear the numbers
SUBTITLE
T-SET
entered incorrectly.
REPEAT
A-B
DISPLAY
DVD
•To display the current disc
•To display the current disc
•To display the current time,
mode.
mode.
tape counter, and channel.
• To select the DVD output
• To select the DVD output
mode.
mode.
• To activate the remote control • To activate the remote control
in DVD mode.
in DVD mode.
MENU
MODE
•To call up the Menu
•To call up the MP3 menu.
•To call up the VCR Menu.
on a disc.
(MP3)
•To arrange the playing
•To set black level on/off.
order or play randomly.
OPEN/CLOSE
/EJECT
Installing the Batteries
for the Remote Control
•To open or close the disc
•To open or close the disc
•To eject the video cassette
tray.
tray.
from the VCR.
• To pause tape playback or
recording.
•To advance playback
one frame at a time.
PAUSE
•To pause disc playback.
•To advance playback
one frame at a time.
• To pause disc playback.
Install two AA batteries
(supplied) matching the polarity indi-
cated inside battery compartment of
the remote control.
• To begin tape playback.
• To begin disc playback.
• To begin disc playback.
PLAY
POWER
•To turn the unit on or off.
•To turn the unit on or off.
•To turn the unit on or off.
1
2
3
REC/OTR
REPEAT
• To start a recording.
•To play a track or disc
repeatedly. (CD)
•To play a chapter or title
repeatedly.
•To play a track, group or disc
repeatedly. (MP3)
RETURN
•To return to the previous
operation on the DVD setup
menu.
•To return to the previous
operation on the DVD setup
menu.
•To search track.
•
To search chapter, title or time.
•To search time. (CD)
SEARCH
MODE
•To call up the index or time
•To rapidly return to
a location of disc.
•To rapidly return to
search menu.
a location of disc.
•Search the markers.
•Search the markers. (CD)
SETUP
•To call up the DVD setup
•To call up the DVD setup
menu.
menu.
SKIP/CH.
SKIP/CH.
• To change channels.
•
To adjust the tracking manually
during playback.
• To skip chapters.
• To skip tracks.
SLOW
• To view the tape
in slow motion.
SPEED
STOP
Keep in mind the following when using
the remote control:
• Make sure that there is no obsta-
cle between the remote and the
remote sensor on the unit.
• Use within the operating range
and angle, as shown.
•To select the recording speed.
• To stop playback.
• To stop playback.
• To stop playback or recording.
SUBTITLE
T-SET
•To put the VCR into standby
•To select subtitles on a disc.
mode for a timer recording.
•
To return to the top file of the
highest hierarchy in the program
and MP3 menu. (MP3)
TOP MENU
VCR
•To call up the Top Menu
on a disc.
• To select the VCR output
mode.
• To activate the remote control
in VCR mode.
VCR/TV
V.SURR
• To select DVD position or
• To select CD/MP3 position
• To select VCR position or
TV position.
or TV position.
TV position.
•To set virtual surround on/off. •To set virtual surround on/off.
Remote
control
EN
–
–
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Display
Lights up when the progressive scan
system is activated.
Lights up when the inserted
Lights up during a recording.
Flashes when a recording is paused.
disc is being played back.
Flashes when an unaccept-
able disc is installed.
OPEN/CLOSE
OUTPUT
POWER
VCR
DVD PROGRESSIVE SCAN
SKIP STOP PLAY
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
H
G SKIP
CHANNEL
REV
FWD
Lights up when the timer recording
or an OTR recording has been set.
VCR/DVD Switching
Because this product is a combination of a VCR and a DVD player, you must select first which
component you wish to operate with the OUTPUT button.
VCR MODE
OPEN/CLOSE
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
OUTPUT
Press the VCR button on the remote control.
POWER
VCR
DVD PROGRESSIVE SCAN
SKIP STOP PLA
REW
F
.FWD STOP/EJECT PLA
Y
REC/OTR
H
Y
G
SKIP
CHANNEL
/
REV
FWD
(Verify that the VCR OUTPUT light is lit.)
1
4
7
2
5
8
3
6
9
SKIP/CH.
VCR/TV
SLOW
DVD MODE
0
VCR
+1 0
DVD
VCR button
DVD button
DISPLAY
PAUSE
Press the DVD button on the remote control.
OUTPUT
PLAY
(Verify that the DVD OUTPUT light is lit.)
STOP
VCR
DVD
REC/OTR
MENU
Note
ENTER
DVD OUTPUT
light
• Pressing only the OUTPUT button on the front
panel DOES NOT switch the mode of the
remote control. You MUST select the correct
mode on the remote control.
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
V.SURR
ANGLE
SUBTITLE
T-SET
REPEAT
A-B
OUTPUT button
VCR OUTPUT
light
EN
–
–
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset for Use
Turn on the unit for the first
time
To Preset the Channel Again
1) Press the MENU button until the main
4
CLOCK SET
MONTH DAY YEAR
0 3 1 5 2 0 0 4
/
menu appears.
or
VCR
HOUR MINUTE AM/PM
– – – – – –
2) Select "CHANNEL SET UP" by pressing
the K or L button. Then, press the B but-
ton.
:
VCR
1
Select the current year
3) Select "AUTO SET UP" by pressing the
K or L button. Then, press the B button.
After scanning, the tuner stops on the low-
est memorized channel.
Turn on the TV and set it
to channel 3.
• If channel 3 is already occupied for broadcasting,
see“RF Output Channel” section.
To Change the On-Screen Language
1) Press the MENU button until the main
5
6
CLOCK SET
MONTH DAY YEAR
menu appears.
0 3 1 5 MON 2 0 0 4
/
or
POWER
2
Remote Control TV Screen
2) Select "LANGUAGE SELECT" by press-
HOUR MINUTE AM/PM
0 5 – – – –
:
ing the K or L button. Then, press the
B
button.
LANGUAGE SELECT
3) Select "ENGLISH" , "FRANCAIS" or
Select the current hour
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
"ESPAÑOL" by pressing the K or L but-
ton. Then, press the CLEAR/C.RESET
button.
or
Hint
CLOCK SET
MONTH DAY YEAR
• If you accidentally select Spanish or
French and need English: Press the
MENU button and choose SELEC.
0 3 1 5 MON 2 0 0 4
/
or
IDIOMA, or SELECTION LANGUE. Press
the B button, and select ENGLISH. Finally,
press the CLEAR/C.RESET button.
HOUR MINUTE AM/PM
0 5 4 0 – –
3
CH 01
:
AUTO SET UP
Select the current minute
Clock Set Up
VCR
VCR
Do you connect the cable from the cable box or
the satellite box to the DVD/VCR’s ANT IN jack?
YES
-MENU-
1
MENU
7
8
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
CLOCK SET
MONTH DAY YEAR
0 3 1 5 MON 2 0 0 4
/
or
Yes Press the MENU
HOUR MINUTE AM/PM
button to exit
0 5
:
4 0
P M AM
B PM
• Refer to “Hint for Cable Box
or Satellite Box” section on
• If the clock is not set, the
or
NO
Select “AM” or “PM”
CLOCK SET screen
appears when you press
the MENU button. In this
case, go to step [2].
page 6.
No Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized
channel.
• You can select only the channels memo-
rized in this unit by using the CHANNEL
buttons.
• If "AUTO SET UP" appears on the TV
screen again, check the cable connections.
Then, press the B button once again.
To exit the CLOCK SET
screen.
2
CLOCK SET
MONTH DAY
0 3 – –
YEAR
– – – –
or
/
HOUR MINUTE AM/PM
– – – – – –
:
Hint
Hint
Select the current month
• Repeat these steps only if either there
was a power failure or this unit has been
unplugged for more than 30 seconds.
• To go back one step, press the s button
(during the steps [2] to [7].)
•
Your clock setting will be lost if either there
is a power failure or this unit has been
unplugged for more than 30 seconds.
To Select a Channel
You can select a channel by directly
entering channel using the Number but-
tons on the remote control.
3
CLOCK SET
MONTH DAY
0 3 1 5
YEAR
– – – –
/
or
Notes for using the Number buttons:
• When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number.(For
example: 117, press 1,1,7)
HOUR MINUTE AM/PM
– – – – – –
:
Select the current day
• You must precede single-digit channel
numbers with a zero (For example:
02, 03, 04 and so on).
EN
–
–
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Functions
Playback
Before:
1
4
Hint
Turn on the TV and set it to
channel 3.
• If channel 3 is already occupied for broad-
casting, see “RF Output Channel” section.
OPEN/CLOSE
POWER
/EJECT
SPEED
AUDIO
• When a tape with-
out record tab is
inserted, the
1
4
7
2
5
8
3
6
9
OPEN/CLOSE
SKIP/CH.
DVD/VCR will start
playback automati-
cally.
VCR
VCR/TV
SLOW
POWER
V
VCR
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
CHANNEL
0
+1 0
DISPLAY
VCR
DVD
PAUSE
Remote Control TV Screen
• Tracking will be
1
3
2
4
automatically
adjusted upon play-
back. To adjust the
tracking manually,
press the CHAN-
NEL buttons.
PLAY
2
PLAYB
PLAY
STOP
3 2
4
3
REC/OTR
OPEN/CLOSE
/EJECT
STOP
STOP
EJECT
A
Recording & OTR (One Touch Recording)
Before:
Turn on the TV and set it to
3
6
Hint
channel 3.
• To view one chan-
nel while recording
another
1
• If channel 3 is already occupied for
2
broadcasting, see “RF Output Channel” section.
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
VCR
1) While you are
recording on the
DVD/VCR, press
the VCR/TV button.
2) At the cable box
or satellite box,
select the channel
you want to view.
• If you have connect-
ed the DVD/VCR to
a cable box or satel-
lite box, refer to
VCR
1
4
7
2
5
8
3
6
9
OPEN/CLOSE
SKIP/CH.
Remote Control TV Screen
1
2
VCR/TV
SLOW
2
POWER
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
CHANNEL
1
4
7
2
5
8
0
3
6
9
SKIP/CH.
0
VCR
+1 0
DVD
DISPLAY
PAUSE
CH12
PLAY
• Select the
desired channel
5
6
4
with tab
STOP
5
4
REC/OTR
MENU
• Select the desired tape
speed
“Hint for Cable Box
or Satellite Box”
section on page 6.
ENTER
3
4
SP
SPEED
Tape Speed
Recording/Playback Time
Type of tape
SP mode
SLP mode
T60
T120
2hours
6hour
T160
2-2/3hours
8hour
1hour
3hour
Accidental erasure prevention
REC/OTR
To prevent accidental recording on a record-
ed cassette, remove its record tab. To record
on it later, cover the hole with cellophane
tape.
REC
You can select a fixed recording time by press-
ing the REC/OTR button repeatedly.
Record tab
REC
OTR(0:30)
OTR(1:00).....
(Normal recording)
You CAN NOT copy a DVD to a videotape.
OTR(8:00)
OTR(7:30)
To stop recording temporarily (Pause mode)
5
6
OPEN/CLOSE
/EJECT
STOP
EJECT
A
Press the PAUSE/STILL button.
STOP
• During the rec-pause mode, five
C
marks appear on the TV
mark represents one minute.
• Press it again to resume recording.
screen. Each
C
Other Operations
To cue or review picture during playback
(Picture Search)
Counter Reset
Hint
Press the CLEAR/C.RESET button.
•
Still/Slow/Pause
mode will be
Press the F.FWD or REW button.
To play back in slow motion
• Press it again and the DVD/VCR will search in
super high speed. (in the LP/SLP modes only)
automatically
cancelled after 5
minutes to pre-
vent damage to
the tape and the
video head.
Press the SLOW button during playback or the still
mode.
To freeze the picture on TV screen during play-
• If the noise bars appear on the TV screen, you can
reduce it by pressing the CHANNEL buttons.
back (Still mode)
Press the PAUSE/STILL button. Each time you
press the button, the picture will be forwarded by
one frame.
• To return to
playback from
the Picture
Search/Still/
Slow mode,
press the PLAY
button.
Auto Rewind
When a tape reaches its end during playback, fast-for-
ward, or recording (except timer recording and One
Touch Recording), the tape will automatically rewind
to the beginning. After rewinding finishes, the
DVD/VCR will eject the tape.
• If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing the
CHANNEL buttons.
• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
EN
–
–
11
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Operations
VCR
1
4
7
2
5
8
3
6
9
VCR
SKIP/CH.
VCR/TV
SLOW
1
To call up the main menu 3 To decide
-MENU-
MENU
CHANNEL SET UP
AUTO SET UP
0
VCR
+1 0
DVD
DISPLAY
PAUSE
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
B MANUAL SET UP
PLAY
STOP
REC/OTR
MENU
2
3
2
To select an item
4
To exit the menu
ENTER
-MENU-
CLEAR/
C. RESET
1
4
MENU
SETUP TOP MENU
RETURN
or
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
OR
SEARCH
MODE
CLEAR/
C. RESET
MODE
V.SURR
ANGLE
4
SUBTITLE
T-SET
REPEAT
A-B
LANGUAGE SELECT
Recording Features
Timer Recording
•Insert a tape with its record tab into the DVD/VCR.
VCR
ONE TIME PROGRAM
PROGRAM NUMBER
9
5
Select the desired start time
VCR
4
DATE
0 5 / 0 3 MON
(hour)
-MENU-
or
1
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
ONE TIME PROGRAM
PROGRAM NUMBER
B TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
MENU
or
4
CHANNEL
1 6
DATE
0 5 / 0 3 MON
REC SPEED SP
B SP
SLP
START TIME 0 7 : 3 0 – –
END TIME – – : – – – –
LANGUAGE SELECT
CHANNEL
REC SPEED – –
– –
Select the desired recording speed
• To set another program after step [9], press the
B
button. Then, continue with step [2].
CLEAR/
C. RESET
Select the minute
or
2
PROGRAM NUMBER
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
4
SUBTITLE
T-SET
10
or
CHANNEL
– –
REC SPEED – –
• TIMER REC light on the front panel appears.
The DVD/VCR will change to the DVD mode.
Select an empty program
number
Hint
ONE TIME PROGRAM
PROGRAM NUMBER
6
• To go back one step, press the
the steps [3] to [9].)
s
button (during
4
DATE
0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME – – : – – – –
or
CHANNEL
– –
To Check, Correct, or Cancel a
Timer Program
REC SPEED – –
AM
3
4
B PM
PROGRAM NUMBER
4
B ONCE
DAILY
WEEKLY
Select “AM” or “PM”
1) Press the SUBTITLE/T-SET button
then, the VCR button on the remote
control.
or
2) Select main menu by pressing the
MENU button.
7
8
Repeat the procedure in steps 5
and 6 to set the end time.
Select “ONCE”, “DAILY”
(Mon-Fri), or “WEEKLY”
3) Select "TIMER PROGRAMMING"
by pressing the K or L button.
Then, press the B button.
4) Select the program number which
you want to check by pressing the
or L button. The details of the pro-
gram you selected will appear on
the TV screen.
K
Select the desired month
ONE TIME PROGRAM
ONE TIME PROGRAM
or
PROGRAM NUMBER
DATE 0 5 / 0 3 MON
START TIME 0 7 : 3 0 PM
END TIME 0 8 : 3 0 PM
4
PROGRAM NUMBER
4
• Go to the digit you want to change
by pressing the B or s button.
Then, enter correct numbers by
pressing the K or L button.
• You may cancel the entire program
by pressing the s button while the
program number flashes.
5) Press the CLEAR/C.RESET button
to exit.
6) Press the SUBTITLE/T-SET button
to return to timer stand-by mode.
DATE
0 5 / 0 3 MON
START TIME – – : – – – –
END TIME – – : – – – –
or
CHANNEL
1 6
REC SPEED – –
CHANNEL
– –
REC SPEED – –
Select the desired channel
If you have connected the DVD/VCR to a
cable box or satellite box as the
Connection A on page 6, select the VCR
to channel 3 or 4 (the RF output channel
of the VCR). Then, select the desired
channel at the cable box or satellite box.
Leave the cable box or satellite box on for
timer recording.
•
Select the desired day
or
• You can program one
year in advance.
To cancel a Timer Recording in
progress
Press the STOP/EJECT button on
the DVD/VCR.
EN
–
–
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Hint for Timer Recording
• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting
and all timer settings will be lost.
• If a tape is not in the DVD/VCR or does not have the record tab, the TIMER REC light flashes and timer
recording cannot be performed. Please insert a recordable tape.
• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automati-
cally as the TIMER REC light flashes. (If the DVD power is off, the VCR will become STANDBY status).
• When all timer recordings are finished, the TIMER REC light will flash.
• When timer recordings are set, the TIMER REC light will appears. To use the VCR as usual until the time for
the recording, press the SUBTITLE/T-SET button so that the TIMER REC light disappears. Press the VCR/TV
button to choose the VCR position. Select either VCR or DVD mode, then continue with the other features as
described in this manual.
If you want to use the DVD player during a VCR timer recording or while the TIMER REC light is on or
flashes.
• You can use the DVD player while the TIMER REC light is on or flashes, or during a timer recording. Press
the POWER button to turn on the DVD. Press the DVD button on the remote control to choose DVD mode,
then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to
use the DVD only.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
1) Insert a pre-recorded tape into the playing VCR.
(Back of TV)
2) Insert a tape with its record tab into the recording
(Back of another source)
(Back of Recording DVD/VCR*)
DVD/VCR.
3) Press the SPEED button on the remote control
of the recording DVD/VCR to select the desired
recording speed (SP/SLP).
DVD/VCR
AUDIO OUT
VCR
2
AUDIO OUT
I
1
or
ANT-IN
L
Connect
AUDIO IN
Connect
R
R
VIDEO OUT
VIDEO OUT
VIDEO IN
ANT-OUT
4) Select the "L1" or "L2" position on the recording
RF cable
(supplied)
*Front input jacks are also available
DVD/VCR.
Audio/Video cables
(not supplied)
• To use the input jacks on the back of this unit,
select "L1" position by pressing [0], [0], [1] on
the remote control or the CHANNEL buttons.
Hint
• To use the input jacks on the front of this unit,
select "L2" position by pressing [0], [0], [2] on
the remote control or the CHANNEL buttons.
• For best results during dubbing, use the front panel controls whenever
possible. The remote control might affect another source’s operation.
• Always use video-quality shielded cables with RCA-type connectors.
Standard audio cables are not recommended.
• You can use a video disc player, satellite receiver, or other audio/video
component with A/V outputs.
5) Press the REC/OTR button on the recording
DVD/VCR.
6) Begin playback of the tape in another source.
7) To stop recording, press the STOP/EJECT button
on the recording DVD/VCR, then stop playback of
the tape in another source.
• “L1” or “L2” is found before the lowest memorized channel. (Example:
CH02)
• “L2” input jacks are on the front of this DVD/VCR.
EN
–
–
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Features
Time Search
Index Search
Auto Repeat
You can repeat playback of a
whole tape automatically.
You can specify the time for fast
forwarding or rewinding.
You can specify the number of pro-
grams to be skipped.
• Insert a tape into this unit.
• Insert a tape into this unit.
• Insert a tape into this unit.
VCR
VCR
VCR
VCR
VCR
VCR
1
1
MENU
-MENU-
1
INDEX SEARCH
TIME SEARCH
SEARCH
– : – –
MODE
SEARCH
MODE
– –
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
x2 (Twice)
or
x1 (Once)
2
2
Select the desired length of
time for fast forwarding or
rewinding
INDEX SEARCH
0 3
or
-MENU-
2
TIME SEARCH
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
2 : 5 0
or
01 ~ 20
CURRENT PROGRAM
Beginning
LANGUAGE SELECT
End
of tape
of tape
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
INDEX MARK
0:01~ 9:59
(1 minute~9 hours
and 59 minutes)
3
AUTO REPEAT
B
To rewind
To fast forward
After searching,
3
To rewind
To fast forward
After searching,
3
4
Hint
• To cancel Auto Repeat, follow steps [1]-[2] above.
Then, press the
B
button, so that [OFF] appears
beside AUTO REPEAT. Press the
CLEAR/C.RESET button to exit.
• If menu remains on the TV screen at step [3],
press the CLEAR/C.RESET button to exit.
4
PLAYB
PLAYB
Hint
• This unit stores index mark at the beginning of
the recording. There should be time gap between
two index marks for the Index Search.
Hint for Timer Search & Index Search
• These functions are not available during recording.
• Press the STOP button to stop the search.
• If the end of the tape is reached during a Search, this unit will cancel the search and rewind the tape.
EN
–
–
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Functions
Playback
Before: Turn on the TV, amplifier and any other components which
are connected to this unit. Make sure the TV and audio receiver
(commercially available) are set to the correct channel.
Hint
OPEN/CLOSE
/EJECT
POWER
• When you play an MP3
file, details on page 16.
SPEED
AUDIO
1
5
1
1
4
7
2
5
8
3
6
9
• A “prohibited icon” may
SKIP/CH.
(
⇒p.16
)
appear at the
DVD-V
DVD
CD
MP3
top-right on
VCR/TV
SLOW
the TV
screen when the opera-
tion is prohibited by the
disc or this unit.
0
VCR
+1 0
DVD
DISPLAY
PAUSE
1
3
5
2
4
OPEN/CLOSE
/EJECT
POWER
PLAY
3
4
• Some DVDs may be
played from title 2 or 3
due to specific pro-
grams.
• During the playback of a
two-layered disc, pic-
tures may stop for a
moment. This happens
while the 1st layer is
being switched to the
2nd layer. This is not a
malfunction.
STOP
REC/OTR
2
Remote Control TV Screen
OPEN/CLOSE
STOP
PLAY
OUTPUT
POWER
VCR
DVD PROGRESSIVE SCAN
SKIP STOP PLAY
REW
F.FWD STOP/EJECT PLAY
/
REC/OTR
H
G SKIP
CHANNEL
REV
FWD
OPEN/CLOSE
/EJECT
1
5
1
4 3
DVD menu
To use the SKIP/REV, FWD/SKIP buttons on the
Main Unit
DVDs may contain menus to access special features. Press
appropriate Number buttons or use the arrow (K/L/s/B)
buttons to highlight your selection on the DVD main menu
and press the ENTER button to confirm.
DVD-V
CD
MP3
Press once to skip chapters or tracks to a desired point.
Press and hold to change forward or reverse playback
speed.
Calling up a Menu Screen during Playback
• Press the MENU button to call up the DVD menu.
• Press the TOP MENU button to call up the title menu.
Note
Fast Forward/Reverse Search
• Menu operations may vary depending on the disc. Refer to
DVD-V
CD
MP3
the manual accompanying the disc for details.
Press the g or h button repeatedly dur-
ing playback to select the required forward or
reverse speed.
To continue playback, press the PLAY
button.
• For DVDs, fast forward or reverse search speed is different
depending on the disc. Approximate speed is
1(x2),2(x8),3(x50),4(x100).
• For Audio CDs, approximate speed is x16.
• For MP3, approximate speed is x8.
E
1
Resume
DVD-V
CD
MP3
Press the STOP button. Resume message will appear on
the TV screen.
Press the PLAY button, play-
back will resume from the
point at which playback was
stopped.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Slow Forward/Slow Reverse
• To cancel resume, press the
STOP button one more time
during the Stop mode.
DVD-V
• For MP3, playback will resume from the beginning of the
Press the g or h button repeatedly dur-
ing the pause mode to select the required for-
1
track at which playback was stopped.
ward or reverse speed.
To continue playback, press the PLAY
button.
Paused and Step-by-Step Playback
DVD-V
CD
MP3
• Slow forward or reverse speed is different depending on
Press the PAUSE button during playback.
To continue playback, press the PLAY
button.
the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).
Hint
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play-
back mode are blurred. (Refer to pages 20-21.)
DVD-V
The disc goes forward by one frame each time the PAUSE
button is pressed during the pause mode.
To continue playback, press the PLAY button.
Hint
• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause
mode are blurred. (Refer to pages 20-21.)
EN
–
–
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 Playback
MP3 is a method of compressing files.You can copy MP3 files on CD-R/RWs from the computer and play the files on this unit.
DVD
2
MP3
STOP
Insert a MP3-format disc, then press
the MENU button to call up the MP3
menu on the TV screen.
Hint
1
MENU
FILE LIST
• Some selections may take a while to be recognized.
DISC NAME
FOLDER
MP3
• Press the TOP MENU button to return to the first item.
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by
• Folders are accompanied by
folder name
folder name
folder name
folder name
1
2
3
4
file name
file name
file name
1
2
3
3
icon.
ENTER
PLAY
1/2
folder name
1
icon.
• A maximum of 255 folders can be recognized.
• A maximum of 512 files can be recognized.
• Up to 8 hierarchies can be created.
When selecting the folder:
• Press the B button when you
want to go to the next hierar-
chy.
• Press the s button when you
want to go back to the previ-
ous hierarchy.
ENTER
This player recommends the files recorded under the following circumstances:
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 112kbps ~ 320kbps.
The On-Screen Display
You can check the information about the current disc by pressing the DISPLAY button on the remote control.
DVD
DVD
DVD-V
CD
DISPLAY
DISPLAY
Current playback status
4/12 0:03:21 - 0:02:15
T
Remaining time of the current track
Elapsed time of the current track
Current playback status
11/16 0:00:00 - 0:03:30
Remaining time of the current chapter
Elapsed time of the current chapter
TR(Track):
Current track number / Total tracks
DISPLAY
CH(Chapter):
Current chapter number / Total chapters
ALL:
DISPLAY
Current track number / Total tracks
4/12 0:13:45 - 0:45:40
T
Current repeat setting appears only when
the repeat setting is active
T: Track repeat
1/3 0:00:00 - 1:23:45
A: All Tracks repeat
Remaining time of the current title
Elapsed time of the current title
A
B: A-B repeat
Remaining time of the current audio CD
Elapsed time of the current audio CD
DISPLAY
TT(Title):
Current title number / Total titles
DISPLAY
T
L1
DVD
Layer numbers, appears only when playing
a two-layered Disc
MP3
DISPLAY
L0: Layer 0 is playing
Current playback status
L1: Layer 1 is playing
TRACK 01
T
Current repeat setting appears only when
the repeat setting is active
The name of the file currently in play
will be displayed.
C: Chapter repeat / T: Title repeat /
DISPLAY
A
B: A-B repeat
TR(Track):
Current Track number / Total Tracks
BIT RATE: The amount of audio and video
data currently being read
1/36 0:01:15
T
DISPLAY
Current Repeat setting, if active
T: Track repeat
G: Group (folder) repeat
A: Disc repeat
Elapsed playing time of the current track
DISPLAY
EN
–
–
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Function
Track Search
Title / Chapter Search
Time Search
DVD
DVD
DVD
CD
MP3
DVD-V
DVD-V
CD
Using the number buttons
1
Using the SEARCH MODE button
1
2
PLAY
TOTAL 1:29:00
1
1
4
7
2
5
8
0
3
6
SEARCH
MODE
/12
SEARCH
MODE
9
/29
x repeatedly until this
screen appears
+1 0
x1(Press once) for the chapter search
x2 (Press twice) for the title search
1
4
7
2
3
6
9
•For single digit tracks (1-9), press a
single number (eg. track 3, press 3).
•To play track 29, press +10, 2, 9 of the
Number buttons.
TOTAL 1:29:00
5
8
0
2
1
4
7
2
5
8
0
3
6
/12
9
Within 30 seconds
+1 0
Using the SEARCH MODE button
Within 30 seconds
SEARCH
1
• e.g. When there is no need to enter a
number, “0” appears automatically. For
example, “0:0_:_ _” appears in the
Time Search display if the total time
of the disc is less than 10 minutes.
MODE
/29
H
G
Using the SKIP
,
buttons
1
2
1
4
7
2
5
8
0
3
6
PLAY
/29
Current Chapter
(CH)
9
+1 0
CH 1 CH 2 CH 3 CH 4
Within 30 seconds
SKIP/CH.
SKIP
SKIP
H
G
Using the SKIP
,
buttons
Note
1
¡Depending on the disc being played,
this function can also be performed by
directly entering the desired chapter
number with the number buttons.
Refer to the manual accompanying
the disc.
PLAY
Current Track
(TR)
TR 1 TR 2 TR 3 TR 4
SKIP/CH.
SKIP
SKIP
Marker Setup
DVD
To return to the marker
later
To exit the marker screen
DVD-V
CD
This feature allows you to assign a specific
point on a disc to be called back later.
1
1
To set a marker
RETURN
PLAY
1
PLAY
SEARCH
MODE
x repeatedly until this
screen appears
SEARCH
MODE
x repeatedly until this
screen appears
Notes
2
¡Opening the disc tray or turning off the
power will erase all markers.
¡Selecting “AC” at step [2] in the sec-
tion “To set a marker” will also erase
all markers.
or
2
or
¡To clear a marker, select the marker to
be cleared at step [2] in the section
“To return to the marker later,” and
then press the CLEAR/C.RESET but-
ton.
3
ENTER
3
ENTER
at the desired marker
•Playback will restart from the specific point
which you set.
EN
–
–
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Repeat A-B Playback
Programmed Playback
DVD
DVD
DVD-V
DVD
CD
MP3
DVD-V
CD
CD
MP3
You may determine the order in which
tracks will play.
1
PLAY
A-
Repeat function is available only during playback.
1
STOP
1
CD-DA
TOTAL 0:00:00
A-B
PLAY
at your desired starting point (A).
ENTER
MODE
REPEAT
2
x1 (Press once)
A-B
A-B
2
Each time the REPEAT button is pressed...
DVD-V
CD-DA
8 3:30
TOTAL 0:08:00
or
at your desired end point (B).
9 2:30
10 1:30
ALL CLEAR
¡Point B should be in the same title
or track as point A is.
(current chapter repeat)
(current title repeat)
(repeat off)
CHAPTER
ENTER
2/2
8
3:30
TITLE
ENTER
¡To exit the sequence, press the A-B
button.
¡To cancel Point A, press the
CLEAR/C.RESET button.
¡This function does not work in the
other repeat modes.
Up to 99 programs can be
stored.
OFF
While a MP3 folder is open:
• For the next hierarchy,
press the B button.
CD
• For the previous hierarchy,
press the s button.
(current track repeat)
(entire disc repeat)
(repeat off)
TRACK
ALL
3
PLAY
Random Playback
OFF
This shuffles the playing order of tracks
instead of playback in the sequence.
Notes
DVD
MP3
¡Press the CLEAR/C.RESET but-
ton at step [2] to erase the most
recently entered program.
¡To erase all programs at once,
select “ALL CLEAR’’ and press
the ENTER button at step [2].
¡While a program is being played
back, the STOP button works as
follows;
CD
MP3
(current track repeat)
(current group repeat)
(entire disc repeat)
(repeat off)
TRACK
GROUP
ALL
1
RANDOM
STOP
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
MODE
PLAY
OFF
x2 (Press twice)
2
¡Repeat setting will be cleared when
moving to another title, chapter, or
track.
¡Repeat playback are not available
with all discs or during repeat A-B
playback.
⇒
Press the STOP button and the
PLAY button next, so that the pro-
grammed playback restarts. (CD
playback restarts from the current
point. MP3 playback restarts from
the beginning of the current track.)
Press the STOP button twice and
the PLAY button next, so that play-
back restarts from the first track in
the original order. However, your
programmed playback can be
restarted when you follow the above
steps. (Your programs are still
stored until either the disc tray is
open or power is turned off.)
PLAY
Note
¡If you want to repeat the current
track in the random selections,
press the REPEAT button repeat-
⇒
edly until
TRACK appears dur-
ing playback. If you want to repeat
the entire random selections,
press the REPEAT button repeat-
edly until
playback.
ALL appears during
¡To repeat the current track in the
program, press the REPEAT but-
ton repeatedly until “
TRACK’’
appears during playback.
¡To repeat the entire program press
the REPEAT button repeatedly until
“
ALL’’ appears during playback.
EN
–
–
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Subtitle Language
Audio Language
Stereo Sound mode
DVD
DVD
DVD
DVD-V
DVD-V
CD
This unit allows you to select a subtitle
language (if available) during DVD play-
back.
This unit allows you to select an audio
language (if multiple languages are
available) during DVD playback.
This unit allows you to select a sound
mode during CD playback.
1
1
1
PLAY
PLAY
STEREO
PLAY
1.ENG/6
1.ENG Dolby D 3/2.1ch 48k/3
AUDIO
AUDIO
SUBTITLE
T-SET
Each time you press the AUDIO button;
For example
Each time you press the SUBTITLE/T-
SET button, subtitle languages change.
For example
Each time you press the AUDIO button;
(right and left channels
are active)
(left channel is active)
STEREO
L-CH
(English audio)
(Spanish audio)
ENG
(English subtitles)
(French subtitles)
ENG
SPA
FRE
(right channel is active)
R-CH
Note
¡If the Virtual Surround setting is “1’’ or
“2’’, the sound mode will be fixed to
STEREO, and can not be changed.
(French audio)
FRE
OFF
(no subtitles)
Camera Angle
Virtual Surround
DVD
To set subtitle ON/OFF
1
DVD-V
DVD-V
CD
MP3
Some DVD discs may con-
tain scenes which have
DVD
PLAY
1.ENG/6
been shot simultaneously
from various angles. You can change
You can enjoy stereophonic virtual
world on your existing 2 channel stereo
system.
the camera angle if the (
) icon
SUBTITLE
T-SET
appears on the screen. If the “ANGLE
ICON” setting is “OFF” in the Display
1
menu, the (
) icon will not appear.
2
(Refer to pages 20-21.)
PLAY
OFF
OFF
1
PLAY
V.SURR
1 / 8
Notes
¡If your language is not shown after
pressing the AUDIO or SUBTITLE/T-
SET button several times, the disc
may not have that language. However,
some discs allow audio language or
subtitle language setting on the disc
menu. (Operation varies depending
on the discs, so refer to the manual
along with the disc.)
¡When “NOT AVAILABLE” appears on
the TV screen, it means no subtitle is
recorded on the scene.
¡If you choose a language that has a 3
letter language code, the code will be
displayed every time you change the
subtitle language setting. If you choose
any other languages, ‘---’ will be dis-
played instead. (Refer to page 24.)
ANGLE
2
ENTER
1
Black Level Setting
DVD
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
DVD-V
Adjust the Black Level Setting to make
the dark areas of the TV picture brighter.
3
RETURN
1
ON
PLAY
Note (for CD play back only)
¡Virtual Surround will not be effective if
the sound mode is set to something
other than STEREO.
MODE
2
ENTER
OFF
ON: Makes the dark areas brighter.
OFF: Shows the original picture as recorded.
3
RETURN
EN
–
–
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
DVD Set Up
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
or
1
2
SETUP
STOP
Select the desired item
<SETUP MENU>
Confirm that QUICK is selected
ENTER
SETUP
QUICK
ENGLISH
SETUP
A
B
C
P20
P21
P21
(Step 5)
(Step 5)
(Step 5)
PLAYER MENU
TV ASPECT
QUICK
CUSTOM
INITIALIZE
4:3 LETTER BOX
ON
DOLBY DIGITAL
ENTER
•Refer to the sections “PLAYER
MENU”, “TV ASPECT”, or “DOLBY
DIGITAL” section on page 20 or 21.
CUSTOM Menu
You can change the DVD player’s settings.
ENTER
or
or
SETUP
1
2
3
STOP
to decide
Select CUSTOM
To select the desired item
<SETUP MENU>
ENTER
SETUP
CUSTOM
SETUP
SETUP
LANGUAGE
DISPLAY
AUDIO
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
PARENTAL
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
SETUP
LANGUAGE
SETUP
DISPLAY
SETUP
AUDIO
SETUP
PARENTAL
PASSWORD
AUDIO
ORIGINAL
OFF
ENGLISH
ENGLISH
TV ASPECT
STILL MODE
ANGLE ICON
4:3 LETTER BOX
AUTO
ON
DRC
ON
Please enter a 4-digit password.
SUBTITLE
DISC MENU
PLAYER MENU
DOWN SAMPLING ON
DOLBY DIGITAL ON
AUTO POWER OFF ON
page 20
page 21
page 21
page 22
A
B
C
D
LANGUAGE Setting
A
Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.
Select the desired language
Select the desired item
4
5
6
To exit the menu
ENTER
SETUP
ENTER
or
or
AUDIO ∗1 ∗2
(Default: ORIGINAL)
Sets the audio language.
AUDIO
Hint
ORIGINAL
ENGLISH
FRENCH
∗1
• Language options are not available with
some discs.
• If OTHER is selected on the AUDIO, SUBTI-
TLE or DISC MENU screen, press four-digit
number to enter the code for the desired lan-
guage. (Refer to the language code list on
page 24.)
• Only the languages supported by the disc
can be selected.
∗2
LANGUAGE menu
SUBTITLE: ∗1 ∗2
(Default: OFF)
Sets the subtitle language.
SUBTITLE
OFF
ENGLISH
FRENCH
SETUP
LANGUAGE
AUDIO
ORIGINAL
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
ENGLISH
DISC MENU: ∗1
(Default: ENGLISH)
Sets the language for DVD
menu.
DISC MENU
ENGLISH
FRENCH
SPANISH
• Language Setting for Audio and Subtitle is
not available with some discs. Then use the
AUDIO and the SUBTITLE/T-SET button.
Details are on page 19.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
QUICK
PLAYER MENU:
(Default: ENGLISH)
Sets the language for the
On-screen display.
EN
–
–
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Setting
B
You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.
4
5
Select the desired item
6 To exit the menu
SETUP
or
QUICK
TV ASPECT:
(Default: 4:3 LETTER BOX)
See Hint to the right.
Select the
desired
setting
ENTER
TV ASPECT
TV ASPECT
STILL MODE
ANGLE ICON
4:3 LETTER BOX
AUTO
ON
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
or
AUTO POWER OFF ON
DISPLAY menu
ENTER
Hint
SETUP
DISPLAY
STILL MODE:
(Default: AUTO)
See Hint to the right.
TV ASPECT:
Select the
desired
setting
• Select “4:3 LETTER BOX”, so
that black bars appear on the
top and bottom of the screen.
• Select “4:3 PAN & SCAN” for
a full height picture with both
sides trimmed.
TV ASPECT
STILL MODE
ANGLE ICON
4:3 LETTER BOX
AUTO
ON
ENTER
AUTO POWER OFF ON
STILL MODE
TV ASPECT
STILL MODE
ANGLE ICON
4:3 LETTER BOX
AUTO
FIELD
FRAME
or
AUTO
ON
AUTO POWER OFF ON
• Select “16:9 WIDE” if a wide-
screen TV is connected to this
unit.
ENTER
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
STILL MODE:
• Select “AUTO” usually.
• If you select “FIELD”, the pic-
ture in the still mode will be
stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
4:3 LETTER BOX
TV ASPECT
STILL MODE
ANGLE ICON
4:3 LETTER BOX
AUTO
ON
AUTO
OFF
ON
AUTO POWER OFF ON
ENTER
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
35 minutes of no use.
TV ASPECT
STILL MODE
ANGLE ICON
4:3 LETTER BOX
AUTO
ON
4:3 LETTER BOX
AUTO
ON
AUTO POWER OFF ON
OFF
ENTER
AUDIO Setting
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)
to 3) in the “CUSTOM Menu” section on page 20.
5
4
6 To exit the menu
Select the desired item
SETUP
or
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DRC
ON
OFF
ON
ON
DOWN SAMPLING ON
DOLBY DIGITAL
ENTER
ON
Hint
AUDIO menu
DRC:
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48 kHz.
SETUP
AUDIO
• This function is available only
on the discs which are record-
ed in the Dolby Digital format.
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL ON
Set to “OFF” when outputting the original sound.
DOWN SAMPLING:
• When playing disc with copy-
right Protection, the sound will
be down sampled at 48kHz,
even if you set to OFF.
DRC
ON
ON
OFF
ON
DOWN SAMPLING ON
DOLBY DIGITAL
ON
ENTER
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
QUICK
DOLBY DIGITAL:
(Default: ON)
Set to “ON” when the unit is connected to a Dolby Digital receiver.
• ON: Outputs a Dolby Digital Signals
• OFF: Convert the Dolby Digital into PCM (2 channel)
DRC
DOWN SAMPLING ON
DOLBY DIGITAL ON
ON
ON
ON
OFF
ENTER
EN
–
–
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
D
Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.
Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.
To exit
the menu
4
Enter your desired four-
digit password (except
for 4737)
5
6
Select “PARENTAL
LEVEL”
Select the
desired levels
7
SETUP
or
or
1
4
7
2
5
8
0
3
6
9
ENTER
ENTER
ENTER
PARENTAL LEVEL
ALL
PARENTAL LEVEL
CHANGE
ALL
8
7 [NC-17]
6 [R]
PARENTAL menu
SETUP
PARENTAL
PASSWORD
Please enter a 4-digit password.
Hint
CONTROL LEVELS
• ALL:
• Levels 8:
or
All parental locks are cancelled.
DVD softwares of any grades (adult/general/children)
can be played back.
Only DVD softwares intended for general use and chil-
dren can be played back.
Only DVD softwares intended for children can be played
back, with those intended for adult and general use pro-
hibited.
If you have set a password already,
enter the current four-digit
password.
• Levels 7 to 2:
• Level 1:
SETUP
PARENTAL
PASSWORD
Enter current password.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.
To exit
the menu
4
5
6
Select “CHANGE”
Enter your new
four-digit password
(except for 4737)
7
Enter your desired four-
digit password (except
for 4737)
SETUP
or
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
ENTER
ENTER
PARENTAL LEVEL
CHANGE
ALL
Hint
• Record the password in
case you forget it.
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
PARENTAL menu
SETUP
PARENTAL
• If you forget the password,
press 4, 7, 3, 7 at step 4,
then enter your new pass-
word.
PASSWORD
Enter current password.
• Password will be cleared
and parental levels will be
set to ALL.
To return the All Selections of SET UP (except for PARENTAL) to the Default Setting
To exit
the menu
4
1
2
3
or
or
SETUP
STOP
SETUP
ENTER
ENTER
Select “YES”
Select INITIALIZE
<SETUP MENU>
x2
(twice)
SETUP
INITIALIZE
SETUP
Hint
• When you cancel
to initialize at step
3,select “NO”.
SETUP
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
EN
–
–
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
Troubleshooting Guide
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the follow-
ing checklist.
PROBLEM
No power.
CORRECTIVE ACTION
• Make sure the power plug is connected to an AC outlet.
• Make sure the power is turned on.
This unit does not respond to • Check if the power plug is connected to an AC outlet.
the remote control.
D
V
D
• Check the batteries in the remote control.
• Aim the remote control directly at the remote sensor. If necessary, remove all the
obstacles between the sensor and the remote.
• You have to be within 23 feet of this unit.
V
C
R
• Check if the right mode is selected. If it’s not in the right mode, press the DVD or
VCR buttons, whichever you need, on the remote control.
• Check if a cassette tape is in this unit.
• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-
ume up, then. If you hear some signal sound from the radio in response to your
pressing buttons on the remote, the remote control is working.
Timer recording is impossible. • Make sure the timer recording is set correctly.
• Make sure the TIMER REC light appears on the DVD/VCR. If not, press the SUBTI-
TLE/T-SET button.
• Make sure the VCR clock is set correctly.
V
C
R
Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.
• Activate this unit in VCR mode. Press the VCR button on the remote control so that the
green VCR OUTPUT light is lit.
(
)
Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL
buttons
on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control.
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .
• Make sure the VCR is not in the Menu mode.
• Change the RF output channel to CH4. Then select the same channel on the TV.
• Fine tune your TV.
Cannot view a tape but the
audio is OK.
No, or poor, playback picture.
TV programs cannot be seen
normally.
• Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6.
• Press the VCR/TV button.
•
Press the VCR button on the remote control to activate it in the VCR mode. Check if the green
VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.
You cannot copy a copyrighted video tape. You are experiencing copy guard protection.
Video or color fades in and out when
making a copy of a video tape.
•
Cannot remove the tape.
• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control
to switch the mode.
• Connect the video cables firmly.
No picture.
• Insert a correct video disc that plays on this unit.
• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then
try other DVD features.
• Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See
page 7.
• Insert the disc.
• Clean the disc.
D
V
D
.
Disc cannot be played
• Place the disc correctly with the label side up.
• Cancel the parental lock or change the control levels.
• Handle a disc with special care so that it does not have fingerprints, scratches, or
dusts on its surface.
.
• Connect the audio cables firmly.
No sound
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
• Connect this unit directly to the TV.
.
No DTS audio is output
.
Distorted picture
•
There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.
• Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the DVD.
Audio or subtitle language
does not match the set up.
The camera angle cannot be
changed.
T
his is not a malfunction.
• The DVD does not contain sequences recorded from different camera angles.
This is not a malfunction.
Audio or subtitle language
cannot be changed.
• The DVD does not contain audio source or subtitles in the selected language.
This is not a malfunction.
“Prohibited icon” appears on the • That operation is prohibited by this unit or the disc.
screen, prohibiting an operation This is not a malfunction.
The PLAY indicator on the
front panel flashes
• An unacceptable disc is installed.
Insert a playable disc.
•
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s
Manual for details on correct operations.
•
•
Playback from a desired track and random playback are not available during program playback.
Some functions are prohibited on some discs.
EN
–
–
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between lan-
guages, the default language will be
English.
Video Heads :
Operating temperature :
41°F (5°C) to 104°F (40°C)
Dimensions :
W : 17 3/16”(435mm)
H : 3 3/4” (94mm)
D : 9 3/16” (233mm)
Weight :
Four Heads
Output signal format :
NTSC color
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
21 W (standby: 3.6W)
Approx 6lbs (2.7kg)
Language List
Language
Code
Language
French [FRE]
Frisian
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
Kazakh
Kinyarwanda
Kirghiz
Kirundi
Code
Language
Macedonian
Malagasy
Malay
Code
Language
Siswat
Slovak
Slovenian
Somali
Code
A-B
5264
5271
5358
5747
5051
5158
5758
5360
5367
5447
5569
5455
5467
5957
5953
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
4748
4747
4752
6563
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
4853
5971
4851
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Moldavian
Mongolian
Nauru
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
6653
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
O-R
Occitan
Bengali;Bangla
Bhutani
Bihari
6149
6164
6159
6247
6265
5247
6258
6266
6367
6459
6461
6467
5565
5560
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Bislama
Breton
Bulgarian
Burmese
Byelorussian
C-E
Cambodian
Catalan
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Chinese [CHI]
Corsican
Croatian
6559
6553
6547
5350
6564
6554
6566
6660
6560
6550
6555
Czech
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
Korean [KOR]
Kurdish
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If
you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)
LIMITED WARRANTY
FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA
in the event of defect in materials or workmanship as follows:
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO
EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUEN-
TIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF
OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF
ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WAR-
RANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED
BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL
WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A
FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS VALID
WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE
FACILITY.
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts
without charge for one (1) year from the date of original retail
purchase. Two (2) years for Picture Tube. Certain parts are
excluded from this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a peri-
od of ninety (90) days from the date of original retail pur-
chase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase
receipt or other proof of original retail purchase will be required together with
the product to obtain service under this warranty.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU
MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT
ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO
OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE
CONTACT FUNAI CORP.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are
altered, replaced, defaced, missing or if service was attempted by an unau-
thorized service center. This SYLVANIA Limited warranty does not apply to
any product not purchased and used in the United States.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF
THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest SYLVANIA Authorized Service Center or for gen-
eral service procedure, please call 1-800-968-3429 or write to the fol-
lowing:
This product is produced for home use and this warranty only covers failures
due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused
by repairs, alterations or product not supplied by FUNAI CORP., or damage
which results from accident, misuse, abuse, mishandling, misapplication, alter-
ation, faulty installation, improper maintenance, commercial use such as hotel,
rental or office use of this product or damage which results from fire, flood, light-
ning or other acts of God.
FUNAI CORPORATION, INC.
SERVICE CENTER
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-968-3429
Head Office: 100 North Street, Teterboro, NJ 07608
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
EN
–
–
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Conexiones
Activación de la unidad
por primera vez
Ajuste del reloj
1
5
4
VCR
Consulte la "Conexión básica del
televisor" en la página delantera
antes de utilizar esta unidad.
VCR
VCR
-MENU-
1
MENU
VCR
PROGRAMAR
AUTOREPETIR [OFF]
AJUSTE CANAL
B AJUSTE DE RELOJ
SELEC. IDIOMA
Canal de salida RF
Si el canal 3 se está utilizando para
una transmisión.
1)Programe su televisor al canal 4.
2)Inserte una cinta pregrabada en esta
unidad.
3)Pulse el botón OUTPUT en el
DVD/VCR para que se encienda la
luz VCR OUTPUT.
1
Encienda el televisor y sin-
tonice al canal 3.
• Si el canal 3 se está utilizando para una trans-
misión, vea la sección "Canal de salida RF".
•
Si no se ha ajustado el reloj,
aparece la pantalla AJUSTE
DE RELOJ cuando pulse el
botón MENU. En este caso,
vaya al paso (2).
o
• Si aparecen ruidos en la pantalla del
televisor,pulse el botón VCR/TV en
el mando a distancia.
4)Pulse una vez el botón PLAY.
5)Después de unos segundos, pulse el
botón PLAY en el DVD/VCR durante
3 segundos.
• El canal de salida RF cambiará del
canal 3 al canal 4 y podrá ver una
imagen reproducida.
• Cuando no aparezca una imagen en
la pantalla del televisor, repita el
paso (4).
POWER
2
Mando a distancia
Pantalla del televisor
SELEC. IDIOMA
ENGLISH
2
3
4
5
AJUSTE DE RELOJ
MES
0 3
DIA
– –
AÑO
– – – –
o
/
FRANCAIS
o
B ESPAÑOL
[ON]
HORA MINUTO AM/PM
– – – – – –
:
Seleccione el mes actual
AJUSTE DE RELOJ
MES
0 3
DIA
1 5
AÑO
– – – –
3
CA 01
/
6)Pulse el botón STOP para parar la
reproducción.
o
HORA MINUTO AM/PM
– – – – – –
:
AJUSTE AUTO
Instalación de las pilas
del mando a distancia
Seleccione el día actual
2
3
2
1
Conecta el cable de la caja de canales de cable o la
caja de satélite en la toma ANT IN de DVD/VCR?
SI
AJUSTE DE RELOJ
MES
0 3
DIA
1 5
AÑO
2 0 0 4
/
o
HORA MINUTO AM/PM
– – – – – –
Si
Pulse el botón
MENU para salir.
:
Seleccione el año actual
NO
Conmutación VCR/DVD
3
No Espere unos minutos.
Después del escaneo
• El sintonizador se detiene en el canal
memorizado más abajo.
• Puede seleccionar sólo los canales memo-
rizados en esta unidad con los botones
CANAL.
OPEN/CLOSE
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
OUTPUT
POWER
VCR
DVD
P
R
O
G
R
E
S
S
I
V
E
SCAN
REW
F
.
F
W
D
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
REC/OTR
SKIP
H
STOP
PLAY
G
SKIP
CHANNEL
/
AJUSTE DE RELOJ
REV
FWD
1
4
7
2
5
8
3
6
9
SKIP/CH.
MES
0 3
DIA
AÑO
VCR/TV
SLOW
/
1 5 LUN 2 0 0 4
o
0
VCR
+
DVD
1 0
Botón VCR
Botón DVD
DISPLAY
PAUSE
HORA MINUTO AM/PM
0 5 – – – –
OUTPUT
:
PLAY
STOP
VCR
DVD
REC/OTR
MENU
Seleccione la hora actual
ENTER
Luz
DVD OUTPUT
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
V.SURR
ANGLE
SUBTITLE
T
-SET
REPEAT
A-B
Botón OUTPUT
6
AJUSTE DE RELOJ
Luz
VCR OUTPUT
MES
0 3
DIA
AÑO
/
1 5 LUN 2 0 0 4
o
HORA MINUTO AM/PM
0 5 4 0 – –
:
MODO VCR
Seleccione los minutos actuales
AJUSTE DE RELOJ
Pulse el botón VCR en el mando a dis-
tancia.
(Compruebe que está encendida la luz
VCR OUTPUT.)
7
8
MODO DVD
Pulse el botón DVD en el mando a dis-
tancia
(Compruebe que está encendida la luz
DVD OUTPUT.)
MES
0 3
DIA
AÑO
/
1 5 LUN 2 0 0 4
o
HORA MINUTO AM/PM
0 5
:
4 0
P M AM
B PM
Seleccione "AM" o "PM".
Nota
• Si pulsa sólo el botón OUTPUT en el
panel frontal NO conmuta el modo del
mando a distancia. DEBE seleccionar
también el modo correcto en el
mando a distancia.
Para salir de la pantalla AJUSTE DE
RELOJ.
ES
–
–
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Español
Reproducción de la grabadora de vídeo
Reproducción de DVD/CD
6
7
Antes: Encienda el televisor y cambie al canal 3.
• Si el canal 3 se está utilizando para una transmisión, vea la
sección "Canal de salida RF".
Antes: Encienda el televisor, amplificador y otros equipos que puedan estar
conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de
audio (de venta en los comercios) están en el canal correcto.
DVD
VCR
VCR
DVD-V
CD
4
OPEN/CLOSE
/EJECT
OPEN/CLOSE
/EJECT
POWER
POWER
Mando a distancia
Pantalla del televisor
SPEED
AUDIO
SPEED
AUDIO
1
3
2
1
3
2
4
1
5
1
OPEN/CLOSE
/EJECT
POWER
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
REPRODUCIR
B
SKIP/CH.
SKIP/CH.
PLAY
VCR/TV
SLOW
VCR/TV
SLOW
Mando a distancia
Pantalla del televisor
0
VCR
+1 0
DVD
0
VCR
+1 0
DVD
DISPLAY
PAUSE
DISPLAY
PAUSE
STOP
4
PLAY
OPEN/CLOSE
/EJECT
PLAY
PLAY
STOP
PARAR
EXPULSAR
A
STOP
STOP
3
REC/OTR
REC/OTR
OPEN/CLOSE
/EJECT
5
2
3
4
Mando a distancia
8
Modo DVD
Modo de grabadora de vídeo
Disco/cinta
(BOordteónnalfabético)
1
4
7
2
5
8
0
3
•Para seleccionar el canal.
•El botón +10 no tiene efecto
en el modo de grabadora de
vídeo.
6
•
Para seleccionar directamente
el capítulo o el título.
•
Para seleccionar directamente
la canción.
9
+1 0
•
•
Para buscar en avance/retroceso
en un disco.
Para empezar la reproducción en avance/
retroceso lento durante el modo de pausa.
•Para buscar en avance/
retroceso en un disco.
•Para el avance/retroceso
de una cinta.
•
•
•
Para seleccionar un ítem
en el menú de la grabadora
de vídeo.
Para avanzar al siguiente
menú de la grabadora de
vídeo.
Para volver un paso
durante el ajuste del reloj y
temporizador.
ENTER
•Para mover el cursor y
determinar su posición.
•Para mover el curso y
determinar su posición.
OPEN/CLOSE
POWER
/EJECT
SPEED
AUDIO
A-B
•Para repetir entre los puntos
A y B elegidos
•
Para repetir entre los puntos A
y B elegidos (disco compacto)
1
4
7
2
5
8
3
6
9
SKIP/CH.
ANGLE
AUDIO
•Para seleccionar los ángulos
de la cámara en un disco.
VCR/TV
SLOW
•Para seleccionar el idioma de •Para seleccionar ESTÉREO,
audio en un disco.
L-CH o R-CH (disco compacto)
•Para borrar los marcadores.
CLEAR/
C. RESET
0
VCR
+1 0
DVD
(Disco compacto)
•Para salir del menú de la
grabadora de vídeo.
•Para reponer el contador de
cinta.
•Para borrar los marcadores.
•Para borrar los números
entrados incorrectamente.
•Para retirar el Nº de estado
en la entrada de programa.
•Para borrar los números
entrados incorrectamente.
DISPLAY
PAUSE
DISPLAY
DVD
•Para indicar el modo de
disco actual.
•Para indicar el modo de
disco actual.
•Para indicar la hora actual,
contador de cinta y canal.
PLAY
• Para seleccionar el modo
de salida de DVD.
• Para seleccionar el modo de
salida de DVD
STOP
• Para activar el mando a
distancia en el modo DVD.
•Para llamar el menu en un
•
Para activar el mando a
distancia en el modo DVD
REC/OTR
MENU
MENU
MODE
•Para llamar el menú MP3
(MP3)
•Para llamar el menú de la
grabadora de vídeo.
disco.
ENTER
•Para disponer el orden de
reproducción o la
reproducción aleatoria.
•Para activar/desactivar el
nivel del negro.
SETUP TOP MENU
RETURN
OPEN/CLOSE
/EJECT
SEARCH
MODE
CLEAR/
MODE
V.SURR
ANGLE
C. RESET
•Para abrir o cerrar la bandeja •Para abrir o cerrar la bandeja •Para expulsar el videocasete
del disco.
del disco.
de la grabadora de vídeo.
SUBTITLE
T-SET
REPEAT
A-B
•
•
Para hacer una pausa de la
reproducción o grabación de la cinta.
Para avanzar la reproducción
un cuadro a la vez.
•Para hacer una pausa de
reproducción del disco.
•Para avanzar la reproducción
un cuadro a la vez.
PAUSE
• Para hacer una pausa en la
reproducción del disco.
•
Para empezar la reproducción
del disco.
•
Para empezar la reproducción
del disco.
•
Para empezar la reproducción
de la cinta.
PLAY
POWER
•Para activar o desactivar la
unidad.
•Para activar o desactivar la
unidad.
•Para activar o desactivar la
unidad.
REC/OTR
REPEAT
• Para empezar una grabaciòn.
•Para reproducir repetidamente una
Para reproducir repetidamente canción o disco (Disco compacto)
•
un capítulo o título.
•
Para reproducir repetidamente una
canción, grupo o disco (MP3).
•Para volver a la operación
RETURN
•Para volver a la operación
previa en el menú de
programación de DVD.
previa en el menú de
programación de DVD.
Para buscar una canción.
•
•
•
•
•
Para buscar un capítulo, título u hora.
Para volver rápidamente a un
lugar o disco.
Para buscar la hora (Disco compacto)
SEARCH
MODE
•Para llamar el menú de
búsqueda de índice u hora.
Para volver rápidamente a un lugar
o disco.
•
Buscar los marcadores.
•
•Para llamar el menú de
Buscar los marcadores. (Disco compacto)
SETUP
•Para llamar el menú de
programación de DVD.
programación de DVD.
SKIP/CH.
SKIP/CH.
•
Para cambiar de canal.
Para ajustar manualmente el
seguimiento durante la reproducción.
•
• Para saltar capítulos
• Para saltar canciones.
SLOW
• Para ver la cinta en cámara
lenta.
SPEED
STOP
•Para seleccionar la velocidad
de grabación.
• Para parar la reproducción o
grabación.
• Para parar la grabación.
• Para parar la grabación.
SUBTITLE
T-SET
•
Para poner la grabadora de
vídeo en el modo de espera
para una grabación con temporizador.
•Para seleccionar subtítulos
en un disco.
•
Para volver al archivo superior
de la jerarquía más alta en el
programa y menú MP3. (MP3)
TOP MENU
VCR
•Para llamar el menú superior
en un disco.
•
•
Para seleccionar el modo de
salida de la grabadora de vídeo.
Para activar el mando a distancia
en el modo de la grabadora de vídeo.
VCR/TV
V.SURR
•
Para seleccionar la posición
de DVD o posición del televisor.
•
Para seleccionar la posición de
CD/MP3 o la posición del televisor.
•
Para seleccionar la posición de la
grabadora de vídeo o posición del televisor.
•Para activar/desactivar el
envolvente virtual.
•Para activar/desactivar el
envolvente virtual.
ES
–
–
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
Connections
Turn on the unit for the
Clock Set Up
1
5
4
first time
VCR
Please refer to “Basic TV
Connection” on the front page
before you use this unit.
VCR
VCR
-MENU-
1
MENU
VCR
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
RF Output Channel
If channel 3 is already occupied for
broadcasting,
1)Set your TV to channel 4.
2)Insert a pre-recorded tape into this
unit.
3)Press the OUTPUT button on the
DVD/VCR so that the VCR OUTPUT
light is lit.
1
Turn on the TV and set it
to channel 3.
• If channel 3 is already occupied for broadcasting,
see“RF Output Channel” section.
• If the clock is not set, the
CLOCK SET screen
or
appears when you press
the MENU button. In this
case, go to step [2].
• If noise appears on the TV screen
press the VCR/TV button on the
remote control.
,
POWER
2
Remote Control TV Screen
LANGUAGE SELECT
2
3
4
5
4)Press the PLAY button once.
CLOCK SET
B ENGLISH
FRANCAIS
ESPAÑOL
[ON]
5)After a few seconds, press the PLAY
button on the DVD/VCR for 3 sec-
onds.
• The RF output channel will change
to channel 4 from channel 3 and you
will see a playback picture.
• When a picture does not appear on
the TV screen, repeat step [4].
6)Press the STOP button to stop play-
back.
MONTH DAY
0 3 – –
YEAR
– – – –
or
/
or
HOUR MINUTE AM/PM
– – – – – –
:
Select the current month
CLOCK SET
MONTH DAY
0 3 1 5
YEAR
3
CH 01
/
– – – –
or
or
or
HOUR MINUTE AM/PM
– – – – – –
:
Installing the Batteries
for the Remote Control
AUTO SET UP
2
Select the current day
3
2
1
Do you connect the cable from the cable box or
the satellite box to the DVD/VCR’s ANT IN jack?
CLOCK SET
MONTH DAY
0 3 1 5
YEAR
2 0 0 4
YES
/
HOUR MINUTE AM/PM
– – – – – –
Yes Press the MENU
:
VCR/DVD Switching
3
button to exit
Select the current year
NO
OPEN/CLOSE
OPEN/CLOSE
/EJECT
POWER
SPEED
AUDIO
OUTPUT
POWER
VCR
DVD
P
R
O
G
R
E
S
S
I
V
E
SCAN
No Please wait for a few minutes.
After scanning...
REW
F
.
F
W
D
S
T
O
P
/
E
J
E
C
T
P
L
A
Y
REC/OTR
SKIP
H
STOP
PLAY
G
SKIP
CHANNEL
/
REV
FWD
1
4
7
2
5
8
3
6
9
SKIP/CH.
CLOCK SET
VCR/TV
SLOW
MONTH DAY
YEAR
• The tuner stops on the lowest memorized
0
VCR
+
DVD
1 0
VCR button
DVD button
0 3 1 5 MON 2 0 0 4
/
DISPLAY
PAUSE
channel.
OUTPUT
PLAY
STOP
HOUR MINUTE AM/PM
0 5 – – – –
• You can select only the channels memo-
rized in this unit by using the CHANNEL
buttons.
:
VCR
DVD
REC/OTR
MENU
ENTER
DVD OUTPUT
light
Select the current hour
SETUP TOP MENU
RETURN
SEARCH
MODE
CLEAR/
C. RESET
MODE
V.SURR
ANGLE
SUBTITLE
T
-SET
REPEAT
A-B
OUTPUT button
VCR OUTPUT
light
6
CLOCK SET
MONTH DAY
YEAR
0 3 1 5 MON 2 0 0 4
/
or
VCR MODE
HOUR MINUTE AM/PM
0 5 4 0 – –
:
Press the VCR button on the remote
Select the current minute
CLOCK SET
control.
(Verify that the VCR OUTPUT light is lit.)
DVD MODE
Press the DVD button on the remote
control.
7
8
MONTH DAY
YEAR
0 3 1 5 MON 2 0 0 4
/
or
(Verify that the DVD OUTPUT light is lit.)
HOUR MINUTE AM/PM
0 5
:
4 0
P M AM
B PM
Note
Select “AM” or “PM”
• Pressing only the OUTPUT button on
the front panel DOES NOT switch the
mode of the remote control. You
MUST select the correct mode on the
remote control.
To exit the CLOCK SET
screen.
EN
–
–
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Use Guide
VCR Playback
DVD/CD Playback
6
7
Before: Turn on the TV and set it to channel 3.
• If channel 3 is already occupied for broadcasting, see “RF
Output Channel” section.
Before: Turn on the TV, amplifier and any other components which are con-
nected to this unit. Make sure the TV and audio receiver (commercially avail-
able) are set to the correct channel.
DVD
VCR
VCR
DVD-V
CD
4
OPEN/CLOSE
/EJECT
OPEN/CLOSE
/EJECT
POWER
POWER
Remote Control TV Screen
SPEED
AUDIO
SPEED
AUDIO
1
3
2
1
3
2
4
1
5
1
OPEN/CLOSE
/EJECT
POWER
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
PLAYB
SKIP/CH.
SKIP/CH.
PLAY
VCR/TV
SLOW
VCR/TV
SLOW
Remote Control TV Screen
0
VCR
+1 0
DVD
0
VCR
+1 0
DVD
DISPLAY
PAUSE
DISPLAY
PAUSE
STOP
4
PLAY
OPEN/CLOSE
/EJECT
PLAY
PLAY
STOP
STOP
EJECT
A
STOP
STOP
3
REC/OTR
REC/OTR
OPEN/CLOSE
/EJECT
5
2
3
4
Remote Control
8
VCR mode
VCR
DVD mode
Disc/Tape
(BAulpthtaobnetical order)
DVD-V
CD
MP3
1
4
7
2
5
8
0
3
•To select channel.
•The +10 button has no effect
in VCR mode.
6
•
To select chapter or title directly. •To select track directly.
9
+1 0
•To search forward/backward
through a disc.
To begin slow forward/reverse
playback during the pause mode.
•To search forward/backward
through a disc.
•To forward/backward a tape.
•
• To select an item
on the VCR Menu.
• To advance to the next
ENTER
•To move the cursor and
determine its position.
•To move the cursor and
determine its position.
VCR Menu.
To go back one step during
OPEN/CLOSE
/EJECT
POWER
•
SPEED
AUDIO
clock and timer setting.
A-B
•To repeat between your
chosen point A and B.
•To repeat between your
chosen point A and B. (CD)
1
4
7
2
5
8
3
6
9
ANGLE
AUDIO
•To select camera angles on
a disc.
SKIP/CH.
•To select audio languages on •To select STEREO,
a disc.
VCR/TV
SLOW
L-CH or R-CH. (CD)
•To clear the markers. (CD)
•To remove status No.
CLEAR/
C. RESET
•To clear the markers.
•To clear the numbers
entered incorrectly.
•To exit the VCR Menu.
•To reset the tape counter.
in program input.
•To clear the numbers
0
VCR
+1 0
DVD
DISPLAY
PAUSE
entered incorrectly.
•To display the current disc
mode.
• To select the DVD output
DISPLAY
DVD
•To display the current disc
mode.
•To display the current time,
tape counter, and channel.
• To select the DVD output
mode.
PLAY
mode.
• To activate the remote control • To activate the remote control
STOP
in DVD mode.
in DVD mode.
MENU
MODE
REC/OTR
MENU
•To call up the Menu
on a disc.
•To call up the MP3 menu.
(MP3)
•To call up the VCR Menu.
ENTER
•To arrange the playing
order or play randomly.
•To set black level on/off.
SETUP TOP MENU
RETURN
OPEN/CLOSE
/EJECT
•To open or close the disc
tray.
•To open or close the disc
tray.
•To eject the video cassette
from the VCR.
SEARCH
MODE
CLEAR/
MODE
V.SURR
ANGLE
C. RESET
• To pause tape playback or
recording.
•To advance playback
one frame at a time.
PAUSE
•To pause disc playback.
•To advance playback
one frame at a time.
SUBTITLE
T-SET
• To pause disc playback.
REPEAT
A-B
• To begin disc playback.
• To begin disc playback.
• To begin tape playback.
•To turn the unit on or off.
• To start a recording.
PLAY
POWER
•To turn the unit on or off.
•To turn the unit on or off.
REC/OTR
REPEAT
•To play a track or disc
repeatedly. (CD)
•To play a track, group or disc
•To play a chapter or title
repeatedly.
repeatedly. (MP3)
RETURN
•To return to the previous
operation on the DVD setup
menu.
•To return to the previous
operation on the DVD setup
menu.
•To search track.
•
To search chapter, title or time.
•To search time. (CD)
•To rapidly return to
a location of disc.
SEARCH
MODE
•To rapidly return to
a location of disc.
•Search the markers.
•To call up the index or time
search menu.
•Search the markers. (CD)
SETUP
•To call up the DVD setup
menu.
•To call up the DVD setup
menu.
SKIP/CH.
SKIP/CH.
• To change channels.
•
To adjust the tracking manually
during playback.
• To skip chapters.
• To skip tracks.
SLOW
• To view the tape
in slow motion.
SPEED
STOP
•To select the recording speed.
• To stop playback.
• To stop playback.
• To stop playback or recording.
SUBTITLE
T-SET
•To put the VCR into standby
mode for a timer recording.
•To select subtitles on a disc.
•
To return to the top file of the
highest hierarchy in the program
and MP3 menu. (MP3)
TOP MENU
VCR
•To call up the Top Menu
on a disc.
• To select the VCR output
mode.
• To activate the remote control
in VCR mode.
VCR/TV
V.SURR
• To select DVD position or
TV position.
• To select CD/MP3 position
or TV position.
• To select VCR position or
TV position.
•To set virtual surround on/off. •To set virtual surround on/off.
0VMN04013 / H9601UD ★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
|