Owner’s Manual
Please read before using this unit.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
DVD/CD Player
Table of Contents
DVL245G
Precautions
Laser Safety ...................................................................2
■ Important Safeguards ..................................................3
Location and Handling....................................................4
Avoid the Hazards of Electrical Shock and Fire.............4
Warning of Dew Formation.............................................4
About Copyright..............................................................4
Symbols Used in This Manual........................................4
Maintenance ...................................................................4
■ About the Media............................................................5
Playable Media...............................................................5
Unplayable Media...........................................................5
Supplied Accessories
Remote control
(NB080UD) with
two AA batteries
Audio/Video cables Owner’s Manual
(WPZ0102TM015/ (1VMN22542)
WPZ0102LTE01)
Owner's Manual
Setup
■ Connections..................................................................6
Connection to a TV.........................................................6
Connection to an Audio System.....................................7
Rear Terminals...............................................................7
■ About the Remote Control...........................................8
Remote Control ..............................................................8
Installing the Batteries for the Remote Control ..............8
Connecting to RF Modulator
If your TV has AUDIO/VIDEO input jacks, see the section
“Connections” on page 6. If not, it is still possible to
connect this unit to your TV by using a STEREO AUDIO/
VIDEO RF modulator (commercially available). In this
case, follow the instructions below.
1) Connect the AUDIO/VIDEO output jacks of this unit to the
AUDIO/VIDEO input jacks of your RF modulator by
Audio / Video cables.
2) The antenna input jack of your TV may have been already
occupied. If so, disconnect the RF cable from your TV,
and then connect the RF cable to your RF modulator
(usually marked “ANT IN”).
ꢀ) Connect your RF modulator to your TV by another RF
cable.
4) Set your RF modulator’s channel ꢀ/4 switch to either ꢀ or
4, whichever the TV channel is least used in your area. If
your RF modulator has a modulator/antenna switch, set it
according to your RF modulator’s manual.
Functions
■ Playback........................................................................9
■ On-Screen Display......................................................10
■ Search Function .........................................................10
Using Track Search......................................................10
Using Title / Chapter Search ........................................10
Using Time Search.......................................................11
Marker Setup................................................................11
■ Repeat / Random / Programmed Playback..............12
Repeat Playback ..........................................................12
Repeat A-B Playback ...................................................12
Random Playback ........................................................12
Programmed Playback .................................................12
■ Special Settings..........................................................13
Subtitle Language.........................................................1ꢀ
Audio Language ...........................................................1ꢀ
Camera Angles.............................................................1ꢀ
Black Level Setting.......................................................1ꢀ
Stereo Sound Mode......................................................1ꢀ
Virtual Surround............................................................1ꢀ
■ DVD Setup...................................................................14
LANGUAGE Setting .....................................................14
DISPLAY Setting ..........................................................15
AUDIO Setting..............................................................15
PARENTAL Setting ......................................................16
OTHERS Setting ..........................................................16
Reset to the Default Setting
5) Turn on your TV and choose the same channel as you
set the RF modulator’s channel ꢀ/4 switch to. For more
details, follow the instructions supplied with the RF modu-
lator.
If your TV does not have AUDIO / VIDEO input jack.
(Back of this unit)
Antenna
Cable
Signal
L
AUDIO OUT
DIGITA
AUDIO O
(Back of TV)
COAXIAL
R
VIDEO
OUT
S-VIDEO
OUT
STEREO AUDIO / VIDEO RF Modulator
(commercially available)
AC 120V ANT IN CHANNEL TO TV VIDEO
AUDIO
1
3
4
R
L
Audio/Video
Cables
(Supplied)
Antenna in jack
RF Cable (Not supplied)
2
3
Hint
(except for PARENTAL Setting)...................................17
• The quality of picture may become poor if the unit is con-
nected to an RF modulator.
Information
■ Troubleshooting Guide..............................................17
■ Specifications .............................................................18
■ Language Code List...................................................18
■ Limited Warranty ........................................................
■ Español........................................................................19
If you need additional operating assistance
after reading this owner’s manual, please call
TOLL FREE : 1-800-968-3429
or visit our web site at
18
■ Quick Use Guide.........................................Back Cover
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instruc-
tions should be read before the product is operated.
2) Retain Instructions - The safety and operating instruc-
tions should be retained for future reference.
ꢀ) Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6) Attachments - Do not use attachments not recom-
mended by the product manufacturer as they may cause
hazards.
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact
with them might be fatal.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry - Never push objects of any kind
into this product through openings as they may touch
dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any
kind on the product.
7) Water and Moisture - Do not use this product near water
- for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub; in a wet basement; or near a swimming
pool; and the like.
18) Servicing - Do not attempt to service this product your-
self as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing
to qualified service personnel.
19) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
8) Accessories - Do not place this
product on an unstable cart, stand,
tripod, bracket, or table. The product
may fall, causing serious injury to a
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into
the product.
child or adult, and serious damage
to the product. Use only with a cart,
stand, tripod, bracket, or table recom-
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to its nor-
mal operation.
e) If the product has been dropped or damaged in any
way.
f) When the product exhibits a distinct change in perfor-
mance - this indicates a need for service.
mended by the manufacturer, or sold
with the product. Any mounting of the
product should follow the manufacturer’s instructions,
and should use a mounting accessory recommended by
the manufacturer.
9) A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to overturn.
10) Ventilation - Slots and openings in the cabinet are pro-
vided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these
openings must not be blocked or covered. The open-
ings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer's instructions have been adhered to.
11) Power Sources - This product should be operated only
from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your product dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instruc-
tions.
20) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is in
proper operating condition.
22) Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
12) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
1ꢀ) Power-Cord Protection - Power-supply cords should
be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the product.
14) Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet.
This will prevent damage to the product due to lightning
and power-line surges.
15) Power lines - An outside antenna system should not be
EN
-ꢀ-
Download from Www.Somanuals.com. All Manuals Search And Download.
Location and Handling
Symbols Used in This Manual
• Do not stand this unit up vertically. Install this unit in a
horizontal and stable position. Do not place anything
directly on top of this unit. Do not place this unit directly
on top of the TV.
The following symbols appear in some headings in this
manual.
• Depending on the TV, noise or disturbance of the
picture and/or sound may be generated if this unit
is placed too close to your TV. In this case, please
ensure enough space between your TV and this unit.
• Do not cover or place this unit in enclosed spaces to
prevent excessive temperature build up.
: Description refers to playback of DVD-Video discs.
: Description refers to playback of Audio CDs.
Maintenance
• Do not place this unit in direct sunlight, or near heat
sources.
SERVICING
• Depending on the environment, the temperature of this
unit may increase slightly. This is not a malfunction.
• Keep this unit away from strong magnetic objects.
• Do not place any object containing water or other liq-
uids on this unit. In the event that liquid should enter
the cabinet, unplug this unit and contact the retailer or
an Authorized Service Center immediately.
• Do not remove this unit cabinet. Touching parts inside
the cabinet could result in electric shock and/or dam-
age to this unit. For service and adjustment inside the
cabinet, call a qualified dealer or an Authorized Service
Center.
•
Please refer to relevant topics on the “Troubleshooting
Guide” on page 17 before returning the unit.
• If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn off, unplug the power plug, and please call
our help line mentioned on the front page to locate an
Authorized Service Center.
CLEANING THE CABINET
• Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
• Be sure to remove disc and unplug the AC power cord
from the output before carrying this unit.
CLEANING DISCS
Avoid the Hazards of Electrical Shock and Fire
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a cir-
cular motion.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or
antistatic spray intended for analog records.
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it
from AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
CLEANING THE DISC LENS
• If this unit still does not perform properly although you refer
to the relevant sections and to “Troubleshooting Guide” in
this Owner’s Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup unit.
Warning of Dew Formation
Moisture may form inside this unit under the following condi-
tions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When this unit is suddenly moved from a cold to warm
environment.
If moisture forms inside this unit, it may not operate
properly or damage the disc. In such case, turn on the
power and wait for more than 2 hours for the moisture to
evaporate.
DISC HANDLING
• When you handle a disc hold it by its edge and try not to
touch the surface of the disc.
• Always store a disc in its protective case when it is not
used.
About Copyright
Unauthorized copying, broadcasting, public performance and
lending of discs are prohibited.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual prop-
erty rights. Use of this copyright protection technology must
be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is pro-
hibited.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
EN
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Media
Playable Media
Playable
Mark (logo)
discs
Recorded
signals
Disc
size
Region code
Disc types
DVD-Video
*1, 2, 4, 6
or
DVD-R
DVD-RW
*1, ꢀ, 4, 5, 6,
7, 9, 10
Example
12 cm
or
8 cm
Title 1
Title 2
Digital video
(MPEG2)
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1
Chapter 2
DVD+R
DVD+RW
*1, ꢀ, 4, 5, 6,
8, 9, 10
Audio CD
*4, 6
Example
12 cm
or
8 cm
Digital audio
Track 1
Track 2
Track 5
Track 6
Track 3
Track 4
CD-R
CD-RW
*4, 5, 6,
9, 10
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot
be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s produc-
ers.
*ꢀ: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use non-standardized discs, this unit may
not play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD
recorder. However, depending on the recording status of a disc, the disc may not be played back at all
or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc with
the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot
be played back. Depending on the recording status of a disc, the disc may not be played back at all. The
picture or sound may not be smooth, etc.
*9: If the recorded portion of the disc is too small (smaller than 55mm across), it may not be played back.
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read
it correctly.
Unplayable Media
• NEVER play back the following discs. Otherwise, malfunction may result!
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL / DTS-CD / DVD-ROM
for personal computers / CD-ROM for personal computers
•
On the following disc, the sound MAY NOT be heard.
Super Audio CD
NOTE:
Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
•
Any other discs without compatibility indications
EN
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Connecting to
RF Modulator” on the front page.
Connection to a TV
Method 1
Method 2
Basic Audio
Good picture
Better picture
TV
AUDIO IN
L
R
VIDEO IN
S-VIDEO IN
S-Video
cable
(commercially
available)
Audio cable
(supplied)
Video cable
(supplied)
This unit
L
AUDIO OUT
L
AUDIO OUT
DIGITAL
AUDIO OUT
COAXIAL
R
V
O
R
S-VIDEO
OUT
VIDEO
OUT
AUDIO OUT
(Analog)
VIDEO OUT
S-VIDEO OUT
Hint
• Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
After you have completed connections;
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input chan-
nel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual
accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral:
Curtis Mathis:
GE:
Hitachi:
JVC:
AUX
Panasonic:
RCA:
Samsung:
Sanyo:
Sharp:
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ
TV/VIDEO
VIDEO
LINE1, LINE2, 00, 90, 91, 92, 9ꢀ
INPUT, TV/VCR, 00, 90, 91, 92, 9ꢀ
INPUT, AUX
VIDEO, VIDEO1, VIDEO2, VIDEOꢀ
00
Kenwood:
LXI-Series:
Magnavox:
AUX
00
AUX CHANNEL
Sony:
Toshiba:
Zenith:
VIDEO1, VIDEO2, VIDEOꢀ
TV/GAME
00
EN
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Audio System
Playing 2 channel audio
Playing Dolby Digital
(Multi-channel audio)
Stereo system
Dolby Digital decoder,
MD deck or DAT deck
Analog audio
input jacks
L
R
COAXIAL
Digital audio
input jack
AUDIO
Audio cable
(supplied)
Audio Coaxial
Digital cable
(commercially
available)
L
This unit
AUDIO OUT
DIGITAL
AUDIO OUT
DIGITAL
AUDIO OUT
AUDIO OUT
(Analog)
R
COAXIAL
Hint
SETUP > QUICK>
Setting
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.
Connection
DOLBY DIGITAL
Connecting to a Dolby Digital decod-
er for Dolby Digital audio output.
BITSTREAM
Connecting to the other equipment
(an MD deck or DAT deck etc.)
without Dolby Digital decoder.
PCM
* To complete these settings, refer to pages 14-15.
Hint
• The audio source on a disc in a Dolby Digital Multi-channel Surround format
cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy
high-quality Dolby Digital Multi-channel Surround sound as heard in the movie
theaters.
• Playing a DVD using incorrect settings may generate noise distortion and may
also damage the speakers.
Rear Terminals
AUDIO OUT (analog) jacks
Connect the supplied audio cable (red/white) here through the
audio in jacks of a TV or other audio equipment.
L
VIDEO OUT jack
Connect the supplied video cable (yellow) here through the video
in jack of a TV.
AUDIO OUT
DIGITAL
AUDIO OUT
S-VIDEO OUT jack
Connect an optional S-Video cable here through the S-video in
jack of a TV.
S-VIDEO
OUT
COAXIAL
VIDEO
OUT
R
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio cable here through the
coaxial digital audio in jack of a decoder or audio receiver.
EN
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Remote Control
Remote Control
Disc
Button
(Alphabetical order)
1
4
7
2
5
8
0
3
6
• To select chapter or title • To select track
directly. directly.
9
OPEN/CLOSE
POWER
+10
SEARCH
MODE
DISPLAY
• To move the cursor and • To move the cursor
AUDIO
SUBTITLE
ANGLE
REPEAT
1
4
2
5
8
0
3
6
ENTER
determine its position.
and determine its
position.
7
9
CLEAR
+10
A-B
•
To repeat between your
chosen point of A and B.
•
To repeat between your
chosen point A and B.
-
A
B
SKIP
PAUSE
SLOW
ANGLE
AUDIO
• To select camera
angles on a disc.
PLAY
------
REV
FWD
STOP
TOP MENU
• To select audio lan-
guage on a disc.
• To select STEREO,
L-ch or R-ch.
SETUP
MODE
ZOOM
MENU
ENTER
• To clear the markers.
• To clear the numbers.
• To cancel the point for
A-B repeat.
• To clear the markers.
To remove status
number in program input.
• To clear the numbers
entered incorrectly.
• To cancel the point
for A-B repeat.
RETURN
•
CLEAR
DISPLAY
• To display the current
disc mode.
• To display the current
disc mode.
• To search forward/back- • To search forward/
ward through a disc.
• To begin slow forward/
reverse playback in the
pause mode.
backward through
a disc.
Installing the Batteries for the Remote Control
REV
FWD
Install two AA batteries (supplied) matching the polarity indicated inside battery
compartment of the remote control.
MENU
• To call up the Menu on
a disc.
------
1
2
3
• To set black level on/off. • To arrange the
• To set virtual surround
on/off.
playing order or play
randomly.
MODE
• To set virtual sur-
round on/off.
Keep in mind the following when using the remote control:
OPEN/CLOSE
• To open or close the
disc tray.
• To open or close the
disc tray.
•
Make sure that there is no obstacle between the remote control and the
remote sensor on the unit.
• The maximum operable ranges from the unit are as follows.
• To pause disc playback. • To pause disc play-
-Line of sight:
-Either side of the center:
-Above:
approx. 2ꢀ feet (7m)
PAUSE
• To advance playback
one frame at a time.
back.
approx. 16 feet (5m) within ꢀ0°
approx. 16 feet (5m) within 15°
approx. 10 feet (ꢀm) within ꢀ0°
-Below:
• To begin disc playback. • To begin disc play-
back.
PLAY
POWER
• To turn the unit on/off.
• To turn the unit on/off.
REPEAT
• To play a chapter or title • To play a track or disc
repeatedly.
repeatedly.
RETURN
• To return to the previ-
ous operation in menu.
• To return to the previ-
ous operation menu.
Hint
• To search chapter, title
or time.
• To set or search the
markers.
• To search tracks.
• To search time.
• To set or search the
markers.
SEARCH
MODE
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
SETUP
• To call up the DVD
setup menu.
• To call up the DVD
setup menu.
SKIP
• To skip chapters or
titles.
• To skip tracks.
• To stop playback.
• To stop playback.
STOP
SUBTITLE
• To select subtitles on
a disc.
------
------
------
TOP MENU
• To call up the Top Menu
on a disc.
ZOOM
• To magnify part of a
picture. (x2/x4)
EN
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
Functions
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Before: Turn on the TV, amplifier and any other
OPEN/CLOSE
PLAY
STOP POWER
equipment which are connected to this unit.
Make sure the TV and audio receiver (commer-
cially available) are set to the correct channel.
2
3 4 1
2
Press [POWER] to turn on
1
Lights up when power is on.
the DVD/CD Player.
OPEN/CLOSE
POWER
SEARCH
MODE
DISPLAY
Hint
Press [OPEN / CLOSE A]
and insert a disc with label
facing up.
2
1
2
AUDIO
SUBTITLE
ANGLE
REPEAT
• A “prohibited icon” may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or ꢀ due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a
moment. This happens while the 1st layer is being switched to the 2nd
layer. This is not a malfunction.
1
4
2
5
8
0
3
6
Press [PLAY B ] to start
playback.
3
4
7
9
CLEAR
+10
-
A
B
SKIP
PAUSE
SLOW
Press [STOP C ] to stop
playback.
TIP:
PLAY
3
4
You can change the On-Screen language in “PLAYER MENU” set-
REV
FWD
ting. (Refer to page 14.)
STOP
TOP MENU
SETUP
MODE
MENU
2
Fast Forward / Reverse Search
ENTER
DVD menu
Use [FWD g] or [REV h] repeatedly dur-
ing playback to select the required forward or
reverse speed.
E
1
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
To continue playback, press [PLAY B].
Calling Up a Menu Screen during Playback
Hint
• For DVDs, fast forward or reverse search speed is different depending on the
disc. Approximate speed is 1(x2), 2(x8), ꢀ(x20), 4(x50) and 5(x100).
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
• For Audio CDs, approximate speed is 1(x2), 2(x8) and ꢀ(xꢀ0).
Hint
Slow Forward / Reverse
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Press [FWD g] or [REV h] repeatedly in
the pause mode to select the required forward
or reverse speed.
1
Resume ON
To continue playback, press [PLAY B].
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Press 'PLAY' to play from here.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Hint
• Slow forward or reverse speed is different depending on the disc. Approximate
speed is 1(1/16), 2(1/8) and ꢀ(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the slow
playback mode are blurred. (Refer to pages 14-15.)
Hint
Zoom
• To cancel resume, press [STOP C] one more time in the stop
mode.
• The resume information will be kept even when unit is in standby
mode.
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
x2
x4
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
ꢀ) To exit zoom function, press [ZOOM] repeatedly to select OFF.
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
To continue playback, press [PLAY B].
Hint
• The picture may be distorted when you press [PAUSE k] or [REV h]
repeatedly in the zoom mode.
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
•
In the zoom mode, it automatically changes
x2(x4) to the zoomed position guide.
EN
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display
You can check the information about the current disc by pressing [DISPLAY] on the remote control.
Angle icon appears in a case multi-
angle is available on the DVD.
DISPLAY
DISPLAY
1
2
Current playback status
Current playback status
4/12 0:03:21 - 0:02:15
T
11/16 0:00:00 - 0:03:30
1
2
Remaining time of the current track
Elapsed time of the current track
TR (Track):
Current track number / Total tracks
Remaining time of the current
chapter
Elapsed time of the current chapter
CH (Chapter):
Current chapter number / Total
chapters
DISPLAY
DISPLAY
ALL:
4/12 0:13:45 - 0:45:40
Current track number / Total tracks
T
1/3 0:00:00 - 1:23:45
Current repeat setting appears only
when the repeat setting is active.
T: Track repeat
Remaining time of the current title
Elapsed time of the current title
A: All Tracks repeat
B: A-B repeat
TT(Title):
Current title number / Total titles
A
DISPLAY
Remaining time of the entire disc
Elapsed time of the entire disc
T
L1
3
DISPLAY
Layer numbers, appears only when
playing a two-layered Disc.
L0: Layer 0 is playing
L1: Layer 1 is playing
3
Current repeat setting appears only
when the repeat setting is active.
C: Chapter repeat
Hint
T: Title repeat
A
B: A-B repeat
• When you are playing a disc in PROGRAM or RANDOM mode,
BIT RATE: The amount of audio and
video data currently being read.
PROGRAM (or RANDOM) will be displayed instead of
.
2
DISPLAY
4
Search Function
SEARCH MODE does not work during the Programmed or Random Playback.
Using Track Search
Using Title / Chapter Search
1
Press track number, using the Number buttons.
1
Press [SEARCH MODE]
once for the chapter
search.
2
Press title / chapter number,
using the Number buttons
within ꢀ0 seconds.
1
4
7
2
5
8
0
3
6
/29
Press twice for the title
search.
SEARCH
MODE
1
4
7
2
5
8
0
3
9
+10
6
9
• For single digit tracks (1-9), press a single number (e.g. track ꢀ, press [3]).
• To play track 26, press [+10], [2], [6] of the Number buttons.
PLAY
+10
Using [SEARCH MODE]
/12
/12
1
Press [SEARCH MODE].
2
Press track number, using
the Number buttons within
ꢀ0 seconds.
Using [SKIP H , G]]
1
4
7
2
5
8
0
3
SEARCH
MODE
Current Chapter
(CH)
1] Use [SKIP H ,,,, G] to search
6
title / chapter during playback.
9
CH 1 CH 2 CH ꢀ CH 4
+10
SKIP
SKIP
SKIP
or
SKIP
/29
Current Title
(TT)
/29
PLAY
TT 1 TT2 TTꢀ TT4
SKIP
Using [SKIP H , G]
(If the disc has no chapters)
1
Using [SKIP H, G] to search track.
Hint
Current Track
(TR)
SKIP
• Depending on the disc being played, this function can also be per-
formed by directly entering the desired chapter number with
the Number buttons. Refer to the manual accompanying the disc.
TR 1 TR 2 TR ꢀ TR 4
PLAY
SKIP
SKIP
EN
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
Search Function
Using Time Search
Marker Setup
This feature allows you to assign a specific point on a disc to be
called back later.
1
Press [SEARCH MODE]
repeatedly until the Time
Search display appears
during playback.
2
Press the desired time
location on the disc, using
the Number buttons within
ꢀ0 seconds.
To set a marker
1
Press [SEARCH MODE] repeatedly until the marker display
1
4
7
2
5
8
0
3
6
9
appears during playback.
SEARCH
MODE
SEARCH
MODE
PLAY
PLAY
2
Use [s / B] to select the
markers.
3
Press [ENTER] to set the
markers.
TOTAL
1:29:00
TOTAL
1:29:00
ENTER
ENTER
Hint
• When there is no need to enter a number, “0” appears automati-
cally.
For example, “0 : 0-: --” appears in the Time Search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
To return to the marker later
1
Press [SEARCH MODE] repeatedly until the marker display
appears.
SEARCH
MODE
2
Use [s / B] to select
markers.
3
Playback will restart from
the specific point which
you have set as the
desired marker.
ENTER
ENTER
To exit the marker display
1
Press [RETURN
] to exit the marker display.
RETURN
Hint
• Opening the disc tray or putting unit in standby mode will erase all markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to the
marker later” will also erase all markers.
• To clear a marker, select the marker to be cleared at step 2 in the section “To
set a marker” or “To return to the marker later,” and then press [CLEAR].
• The marker display will disappear in about ꢀ0 seconds when there is no out-
put.
EN
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat / Random / Programmed Playback
Repeat Playback
Random Playback
This function shuffles the playing order of
tracks instead of playback in the sequence.
Repeat function is available only during playback.
1
Press [MODE] twice when
2
Press [PLAY B] to start
any track is not in playback.
random playback.
1
Press [REPEAT] during playback.
MODE
STOP
PLAY
REPEAT
PLAY
RANDOM
CD-DA
TOTAL 0:45:55
<Example: DVD>
RANDOM PROGRAM
--no indication--
Each time you press [REPEAT], repeat function changes as
example below.
Hint
OFF
(repeat off)
• To repeat the current track in the random selections, press
[REPEAT] repeatedly until “ TRACK” appears during playback.
• To repeat the entire random selections, press [REPEAT] repeatedly
until “ ALL” appears during playback.
CHAPTER
TITLE
(current chapter repeat)
(current title repeat)
• During random playback, you cannot go back to the previous track.
Programmed Playback
OFF
(repeat off)
You may determine the order in which tracks will
play.
TRACK
ALL
(current track repeat)
(entire disc repeat)
1
Press [MODE] once when
any track is not in playback.
2
Use [K / L] at your desired
track, then press [ENTER].
Up to 99 tracks can be
ordered.
If eight or more tracks are in
a program, use
Hint
[SKIP H, G] to see all
the tracks.
• Repeat setting will be cleared when moving to another title, chap-
ter, or track.
MODE
• Repeat playback may not function with some discs or during
repeat A-B playback.
ENTER
ENTER
STOP
Repeat A-B Playback
TOTAL
0:50:20
CD-DA
TOTAL 0:00:00
1
5
3:30
5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
Repeat function is available only during playback.
1/4
1
Press [A-B] at your desired 2 Press [A-B] at your desired
starting point (A). ending point (B).
3
Press [PLAY B]
to start the program.
A-B
A-B
PLAY
PLAY
A-
A-B
Hint
• Press [CLEAR] at step 2 to erase the most recently entered track.
• Point B should be in the same
title or track as point A.
• To erase all programmed tracks at once, select “ALL CLEAR’’ and
press [ENTER] at step 2.
Hint
• While a program is being played back, [STOP C] works as follows;
Press [STOP C] and [PLAY B] next, so that the programmed playback
restarts.
• To exit the sequence, press [A-B] so that “OFF” appears.
• To cancel point A, press [CLEAR] at step 1.
Press [STOP C] twice and [PLAY B] next, so that playback restarts from
the first track in the original order. However, your programmed playback can be
restarted when you follow the above steps. (Your programs are still stored until
either the disc tray is open or power is turned off.)
• This function does not work in the other repeat modes.
• To repeat the current track in the program, press [REPEAT] repeat-
edly until “
• To repeat the entire program, press [REPEAT] repeatedly until
ALL’’ appears during playback.
TRACK’’ appears during playback.
“
EN
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Settings
Subtitle Language
1
Press [ANGLE] during playback.
1 / 8
ANGLE
This unit allows you to select a subtitle language
(if available) during DVD playback.
PLAY
OFF (no subtitles)
1
Press [SUBTITLE] during
Black Level Setting
playback.
SUBTITLE
ENG (English subtitles)
FRE (French subtitles)
Adjust the Black Level Setting to make the dark
areas of the TV picture brighter.
PLAY
1.ENG/6
1
2
Press [MODE] during playback.
ON
MODE
PLAY
To set subtitle ON/OFF
Each time you press [SUBTITLE], subtitle language chang-
es as example above.
Press [ENTER] to adjust the
Black Level Setting.
3
Press [RETURN
to exit the Black Level
Setting.
]
1
Press [SUBTITLE] during
playback.
2
Press [B] to set ON or
OFF.
OFF
ENTER
ENTER
SUBTITLE
RETURN
PLAY
ON: Makes the dark areas brighter.
OFF: Shows the original picture as
1.ENG/6
recorded.
OFF
Stereo Sound Mode
Hint
• If your language is not shown after pressing [SUBTITLE] several
times, the disc may not have that language. However, some discs
allow subtitle language setting on the disc menu. (Operation varies
depending on the disc, so refer to the manual along with the disc.)
This unit allows you to select a sound mode dur-
ing CD playback.
STEREO
1
Press [AUDIO] during CD
playback.
(right and left channels
are active)
• When “NOT AVAILABLE” appears on the TV screen, it means no
subtitle is recorded on the scene.
• If you choose a language that has a three-letter-language code, the
code will be displayed every time you change the subtitle language
setting. If you choose any other languages, ‘---’ will be displayed
instead. (Refer to page 18.)
AUDIO
L-ch
(left channel is active)
PLAY
R-ch
(right channel is active)
STEREO
• Some discs will only allow you to change the subtitle from the menu.
Refer to the manual accompanying the discs for details.
Each time you press [AUDIO], sound
mode changes as example above.
Hint
Audio Language
• Virtual Surround cannot be changed when the sound mode is set to either
L-ch or R-ch.
This unit allows you to select an audio language (if
multiple languages are available) during DVD playback.
Virtual Surround
ENG (English audio)
1
Press [AUDIO] during DVD
playback.
You can enjoy stereophonic virtual world
on your existing 2 channel stereo system.
AUDIO
SPA (Spanish audio)
PLAY
1
3
Press [MODE] twice (once
2
Press [ENTER] for the
desired effect.
FRE (French audio)
for CD) during playback.
1.ENG Dolby D 3/2.1ch 48k/3
MODE
ENTER
PLAY
Each time you press [AUDIO], audio language changes as
example above.
1
OFF
Hint
• Some discs will only allow you to change the audio setting from the menu.
Refer to the manual accompanying the discs for details.
1: Natural effect
2: Emphasized effect
OFF: No effects (original sound)
•
When “OFF” appears on the TV screen, it means audio language is not available.
• If your language is not shown after pressing [AUDIO] several times, the disc
may not have that language. However, some disc allow audio language setting
on the disc menu. (Operation varies depending on the disc, so refer to the
manual along with the disc.)
Press [RETURN
] to exit the Virtual Surround Setting.
RETURN
Camera Angles
Hint
For CD playback only
• The setting will be kept even if the unit is turned off.
• On Audio CD’s, Virtual Surround will not be effective if the sound mode is set
to something other than “STEREO”. Refer to “Stereo Sound Mode”.
• Turn down the level or select “OFF” if the sound is distorted.
• When playing back 96kHz with Virtual Surround function, the sound will be
down sampled at 48kHz and output as digital audio.
Some DVD discs may contain scenes which have
been shot simultaneously from various angles.
You can change the camera angle if the angle
icon appears on the screen. If the “ANGLE ICON” setting is
“OFF” in the OTHERS menu, the angle icon will not appear.
(Refer to pages 14-16.)
EN
-1ꢀ-
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup
QUICK SETUP Menu
You can select the “PLAYER MENU”, “TV ASPECT” or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.
1 Press [SETUP] in the stop mode.
2
Select the desired item.
SETUP
ENTER
STOP
<SETUP MENU>
ENTER
Confirm that “QUICK” is selected.
SETUP
QUICK
ENGLISH
Step 5
Step 5
Step 5
P14 A
P15 B
P15 C
SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
4:3 LETTER BOX
BITSTREAM
QUICK
CUSTOM
INITIALIZE
ENTER
Refer to the sections “PLAYER MENU”, “TV ASPECT” or
“DOLBY DIGITAL” on page 14 or 15.
CUSTOM Menu
You can change the settings of the unit.
QUICK
•
on pages 14-15 indicates DVD Setup menus also accessible from the QUICK SETUP menu.
1 Press [SETUP] in the stop mode.
2
Select “CUSTOM”.
3
Select the desired item.
SETUP
ENTER
ENTER
STOP
ENTER
<SETUP MENU>
ENTER
SETUP
CUSTOM
SETUP
SETUP
LANGUAGE
DISPLAY
AUDIO
PARENTAL
OTHERS
QUICK
CUSTOM
INITIALIZE
QUICK
CUSTOM
INITIALIZE
LANGUAGE menu
DISPLAY menu
AUDIO menu
PARENTAL menu
OTHERS menu
SETUP
SETUP
DRC
AUDIO
SETUP
PARENTAL
OTHERS
SETUP
DISPLAY
SETUP
LANGUAGE
PASSWORD
ON
ANGLE ICON
ON
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
AUDIO
ORIGINAL
Please enter a 4-digit password.
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
AUTO POWER OFF ON
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
ENGLISH
page 14
page 15
page 15
page 16
page 16
A
B
C
D
E
LANGUAGE Setting
A
Follow steps 1 to ꢀ in the “CUSTOM Menu” section above.
4
Select the desired item.
5
Select the desired language.
6
To exit the menu
ENTER
ENTER
SETUP
ENTER
ENTER
Hint
AUDIO
AUDIO *1 *2
(Default: ORIGINAL)
Sets the audio language.
ORIGINAL
ENGLISH
FRENCH
*1
• Language options are not available with
some discs.
LANGUAGE menu
SUBTITLE
OFF
ENGLISH
FRENCH
• If OTHER is selected in the AUDIO,
SUBTITLE or DISC MENU screen, press a
four-digit number to enter the code for the
desired language. (Refer to the language
code list on page 18.)
• Only the languages supported by the disc
can be selected.
SUBTITLE: *1 *2
(Default: OFF)
Sets the subtitle language.
SETUP
LANGUAGE
AUDIO
ORIGINAL
SUBTITLE
DISC MENU
PLAYER MENU
OFF
ENGLISH
ENGLISH
DISC MENU: *1
(Default: ENGLISH)
Sets the language in DVD
menu.
PLAYER MENU:
(Default: ENGLISH)
Sets the language for the
On-Screen Display.
DISC MENU
ENGLISH
FRENCH
SPANISH
*2
QUICK
• Language setting for Audio and Subtitle are
not available with some discs. Then press
[AUDIO] and [SUBTITLE]. Details are on
page 1ꢀ.
PLAYER MENU
ENGLISH
FRANÇAIS
ESPAÑOL
EN
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Setting
B
You can change the display functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 14.
5
4
Select the desired item.
6
To exit the menu
QUICK
SETUP
TV ASPECT:
Select the
desired
setting.
(Default: 4:3 LETTER BOX)
See Hint on the right.
ENTER
ENTER
TV ASPECT
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
Hint
TV ASPECT:
ENTER
• Select “4:ꢀ LETTER BOX”, so
that black bars may appear
on the top and bottom of the
screen.
• Select “4:ꢀ PAN & SCAN” for
a full height picture with both
sides adjusted.
• Select “16:9 WIDE” if a wide-
screen TV is connected to this
unit.
DISPLAY menu
ENTER
SETUP
DISPLAY
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
STILL MODE:
(Default: AUTO)
See Hint on the right.
Select the
desired
setting.
STILL MODE
ENTER
TV ASPECT
STILL MODE
4:3 LETTER BOX
AUTO
AUTO
FIELD
FRAME
ENTER
STILL MODE:
• Select “AUTO” usually.
ENTER
• If you select “FIELD”, the
picture in the still mode will be
stabilized.
• If you select “AUTO”, automat-
ically select the best resolution
setting (FRAME or FIELD)
based on the data characteris-
tics of the pictures. (default)
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
• An individual picture on
the TV screen is called as
“frame”, which consists of
two separate images called a
“field”.
• Some pictures may be blurred
if you select “AUTO” in the
still mode due to their data
characteristics.
AUDIO Setting
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to
ꢀ in the “CUSTOM Menu” section on page 14.
5
4
Select the desired item.
6
To exit the menu
SETUP
DRC (Dynamic Range Control):
(Default: ON)
ENTER
Set to “ON” to compress the range between soft and loud sounds.
Hint
DRC:
DRC
DOWN SAMPLING ON
DOLBY DIGITAL
ON
OFF
ON
BITSTREAM ENTER BITSTREAM
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
AUDIO menu
SETUP
DRC
AUDIO
DOWN SAMPLING:
(Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
ON
DOWN SAMPLING:
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
• When playing back a 96kHz
disc with the copyright protec-
tion, or when Virtual Surround
is set to “1” or “2”, the sound
will be down sampled at
DRC
ON
ON
OFF
BITSTREAM
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
ENTER
48kHz and output as digital
Audio even if the “DOWN
SAMPLING” is set to “OFF”.
QUICK
DOLBY DIGITAL:
• This function is available
only on digital outputting of
a disc recorded in 96kHz.
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs a Dolby Digital Signals.
• PCM: convert the Dolby Digital into PCM (2 channel).
DRC
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ON
ON
ON
PCM
ENTER
EN
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
PARENTAL Setting
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be acceptable.)
This feature prevents your children from viewing inappropriate materials.
Parental Levels
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you
set. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 14.
7 To exit the menu
4
Enter your desired four-digit
password.
5
Select “PARENTAL
LEVEL”.
6
Select the desired level.
SETUP
1
4
7
2
5
8
0
3
6
9
ENTER
ENTER
ENTER
ENTER
ENTER
PARENTAL LEVEL
PASSWORD CHANGE
ALL
PARENTAL LEVEL
ALL
8 [ADULT]
7 [NC-17]
6 [R]
PARENTAL menu
SETUP
PARENTAL
CONTROL LEVELS
PASSWORD
• ALL:
All parental locks are cancelled.
DVD softwares of any grades (adult / general / children) can be played back.
Please enter a 4-digit password.
• Level 8:
• Levels 7 to 2: Only DVD softwares intended for general use and children can be played back.
• Level 1:
Only DVD softwares intended for children can be played back, with those
intended for adult and general use prohibited.
TIPS FOR LEVELS
or
• 8 [ADULT]:
• 7 [NC-17]:
• 6 [R]:
DVD software of any grades (adult/general/children) can be played back.
No one under 17 admitted
If you have set a password
already, enter the current
four-digit password.
Restricted; under 17 requires accompanying parent or adult guardian
Parental Guidance Recommended
Unsuitable for children under 1ꢀ
Parental Guidance suggested
• 5 [PGR]:
• 4 [PG1ꢀ]:
• ꢀ [PG]:
SETUP
PARENTAL
• 2 [G]:
General Audience
PASSWORD
• 1 [KID SAFE]: Suitable for children
Enter current password.
Hint
• DVD-Video discs may not respond to the Parental Lock settings. Make sure this function works with your
DVD-Video discs.
To Change the Password for Parental Controls
You can change your password for parental controls. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 14.
4
Enter the current four-digit
password.
5
Select “PASSWORD
CHANGE”.
6
Enter your new four-digit
password (except for
47ꢀ7).
7 To exit the menu
SETUP
ENTER
ENTER
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
ENTER
Hint
Record the password in
case you forget it.
• If you forget the password,
enter [4], [7], [3], [7] at
step 4, then enter your new
password. Password will
be cleared and Parental
Levels will be set to “ALL”.
PARENTAL LEVEL
PASSWORD CHANGE
ALL
•
PARENTAL menu
SETUP
PASSWORD
PARENTAL
SETUP
PASSWORD
Please enter a 4-digit password.
PARENTAL
Enter current password.
OTHERS Setting
E
You can change the other functions. Follow steps 1 to ꢀ in the “CUSTOM Menu” section on page 14.
ANGLE ICON:
(Default: ON)
Set to “ON” to show the angle icon when multiple camera
angles are available during DVD playback.
6
To exit the menu
4
Select the desired item.
5
SETUP
ENTER
OFF
ON
ANGLE ICON
AUTO POWER OFF ON
ON
ENTER
AUTO POWER OFF:
(Default: ON)
Set to “ON” to turn this unit off automatically after
ꢀ0 minutes of no use.
OTHERS menu
SETUP
OTHERS
ANGLE ICON
ON
AUTO POWER OFF
ON
ANGLE ICON
ON
ON
AUTO POWER OFF ON
OFF
ENTER
EN
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset to the Default Setting (except for PARENTAL Setting)
4 To exit the
1 Press [SETUP].
2 Select “INITIALIZE”.
3 Select “YES”.
menu
SETUP
STOP
ENTER
ENTER
SETUP
ENTER
ENTER
SETUP menu
SETUP
SETUP
INITIALIZE
Press twice. Hint
SETUP
QUICK
CUSTOM
INITIALIZE
Initialize?
NO
YES
QUICK
CUSTOM
INITIALIZE
• When you cancel
to initialize at step
ꢀ, select “NO”.
Information
Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit consulting the follow-
ing checklist.
Problem
Solution
No power
–Check if the AC power cord is properly connected.
–Unplug the outlet once, and wait for 5-10 seconds and then plug it in again.
No sound or picture
Distorted picture
–Check if the TV is switched on.
–Check the video connection.
–Check the VIDEO/AUDIO cable connections to the TV.
(See page 6.)
–Sometimes a small amount of picture distortion may appear.
This is not a malfunction.
–Connect the unit directly to the TV.
Completely distorted picture or black/white
picture with DVD
–Connect the unit directly to the TV.
–Make sure the disc is compatible with the unit.
No sound or distorted sound
–Adjust the volume.
–Check that the speakers are connected correctly.
No audio at digital output
No DTS audio is output.
–Check the digital connections.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–This unit does not support DTS audio.
–This is not a malfunction.
Picture freezes momentarily during
playback.
–Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.
Disc can’t be played.
–Clean the disc.
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–Cancel the parental lock or change the control level.
–Insert a correct disc that plays on this unit.
–Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.
No return to start-up screen when disc is
removed.
–Reset the unit by switching the unit off, then on again.
The unit does not respond to the remote
control.
–Aim the remote control directly at the sensor on the front of the unit.
–Reduce the distance to the unit.
–Replace the batteries in the remote control.
–Re-insert the batteries with their polarities (+/– signs) as indicated.
–Tune your radio to an empty AM station so that you hear a lot of noises. Then, turn the volume up. If you hear some signal
sound from the radio by pressing buttons on the remote control, the remote control is working.
Buttons do not work or the unit stops
responding.
–To completely reset the unit, unplug the AC cord from the AC outlet for 5-10 seconds.
–Operations may not be permitted by the disc. Refer to the instructions of the disc.
–Use a commonly available cleaning CD / DVD to clean the lens before sending the unit for repair.
The unit does not respond to some
operating commands during playback.
The unit cannot read CDs / DVDs.
Angle does not switch.
–The angle cannot be switched for DVDs which do not contain multiple angles. In some cases multiple angles are only
recorded for specific scenes.
The password for rating level has been
forgotten.
–Enter the default password “47ꢀ7”, then your forgotten password will be cleared.
NOTES:
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual for more details on
correct operations.
• Playback from a desired track and random playback are not available during program playback.
• Some functions are prohibited on some discs.
EN
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Output signal format:
NTSC color
Operating temperature:
41°F (5°C) to 104°F (40°C)
Dimensions:
• Designs and specifications are subject
to change without notice.
• If there is a discrepancy between
languages, the default language will
be English.
Power source:
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption:
10 W (standby: 0.8 W)
W : 9 5/8 ”
H : 2 ”
D : 9 11/16 ”
(245 mm)
(52 mm)
(246 mm)
Weight :
Approx. 1.9 lbs (0.9 kg)
Language Code List
Language
Code
Language
Code
Language
Code
Language
Code
A-B
French [FRE]
Frisian
5264
5271
5ꢀ58
5747
5051
5158
5758
5ꢀ60
5ꢀ67
5447
5569
5455
5467
Macedonian
Malagasy
Malay
5957
595ꢀ
5965
5958
5966
5955
5964
5961
5960
6047
6051
6061
Siswat
Slovak
Slovenian
Somali
6565
6557
6558
6561
5165
6567
6569
6568
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
4748
4747
4752
656ꢀ
4759
4764
5471
4765
4771
4772
4847
5167
4860
5072
4854
4855
4864
485ꢀ
5971
4851
Galician
Georgian
German [GER]
Greek [GRE]
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian [HUN]
I-K
Icelandic [ICE]
Indonesian
Interlingua
Interlingue
Inupiak
Malayalam
Maltese
Maori
Spanish [SPA]
Sundanese
Swahili
Marathi
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Moldavian
Mongolian
Nauru
Swedish [SWE]
T
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Tsonga
Turkish [TUR]
Turkmen
Twi
6658
665ꢀ
6647
6666
6651
6654
4861
6655
6661
6665
6664
6657
6669
Nepali
Norwegian [NOR]
O-R
Occitan
Basque
Bengali;Bangla
Bhutani
Bihari
6149
6164
6159
6247
6265
5247
6258
6266
6ꢀ67
6459
6461
6467
5565
5560
5547
5551
5557
5ꢀ47
5566
5647
5669
5760
5765
5757
6469
5771
6460
5761
5767
Oriya
Oromo (Afan)
Panjabi
Pashto;Pushto
Persian
Polish [POL]
Portuguese [POR]
Quechua
Rhaeto-Romance
Romanian [RUM]
Russian [RUS]
S
Samoan
Sangho
Sanskrit
Bislama
Breton
Bulgarian
Burmese
Byelorussian
Irish [IRI]
Italian [ITA]
Japanese [JPN]
Javanese
Kannada
Kashmiri
C-E
Cambodian
Catalan
Chinese [CHI]
Corsican
Croatian
Czech [CZE]
Danish [DAN]
Dutch [DUT]
English [ENG]
Esperanto
Estonian
5759
4947
7254
4961
5464
4965
5047
6058
5160
5161
5166
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6757
6764
6772
6855
6861
4971
6961
7054
5655
7161
7267
Kazakh
Kinyarwanda
Kirghiz
Kirundi
6559
655ꢀ
6547
5ꢀ50
6564
6554
6566
6660
6560
6550
6555
Korean [KOR]
Kurdish
Scots Gaelic
Serbian
Serbo-Croatian
Sesotho
L-N
Laothian
Latin
Latvian;Lettish
Lingala
Lithuanian
5861
5847
5868
5860
5866
F-H
Setswana
Shona
Sindhi
Faroese
Fiji
Finnish [FIN]
5261
5256
5255
Singhalese
If you choose a Language that has a ꢀ letter language code, the code will be displayed every time you change the Audio or Subtitle language
setting on page 1ꢀ. If you choose any other languages, ‘---’ will be displayed instead. (ꢀ letter language code is written in bracket.)
Limited Warranty
FUNAI CORP. will repair this product, free of charge in the USA in
the event of defect in materials or workmanship as follows:
DURATION:
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR
OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER
PARTS: FUNAI CORP. will provide parts to replace defective parts WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER
without charge for one (1) year from the date of original
retail purchase. Certain parts are excluded from this
warranty.
LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES
INCLUDING THE WARRANTY OF MERCHANTABILITY, AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE
UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS
MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO
AN AUTHORIZED SERVICE CENTER.
LABOR: FUNAI CORP. will provide the labor without charge for a
period of ninety (90) days from the date of original retail
purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A pur-
chase receipt or other proof of original retail purchase will be required
together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the
product are altered, replaced, defaced, missing or if service was
attempted by an unauthorized service center. This limited warranty
does not apply to any product not purchased and used in the United
States.
This product is produced for home use and this warranty only covers
failures due to defects in material or workmanship which occurs dur-
ing normal use. It does not cover damage which occurs in shipment,
or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident,
misuse, abuse, mishandling, misapplication, alteration, faulty instal-
lation, improper maintenance, commercial use such as hotel, rental
or office use of this product or damage which results from fire, flood,
lightning or other acts of God.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO
STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU
ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF
THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN
OF THIS PRODUCT WITHOUT PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for gen-
eral service inquiries, please contact us at:
FUNAI CORPORATION
Customer Service
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY
ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC
PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL
IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT
Tel :1-800-968-3429
19900 Van Ness Avenue, Torrance, CA 90501
EN
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
Control remoto
5
Español
Disco
Botón
(Orden alfabético)
Conexiones
1
1
4
7
2
5
8
0
3
6
• Para seleccionar
directamente el capítulo
o título.
• Para seleccionar
directamente la canción.
Si su televisor tiene entradas de AUDIO/VIDEO vea la
sección “Connection to a TV” en la página 6 en el Manual
de Manejo. En caso contrario, vea la sección “Connecting
to RF Modulator” en la página del frente en el Manual de
Manejo.
9
+10
• Para mover el cursor y
determinar la posición.
• Para mover el cursor y
determinar la posición.
ENTER
Instalación de las pilas en el control remoto
2
1
2
3
A-B
• Para repetir entre su punto
A y B seleccionado.
•
Para repetir entre su
punto A y B seleccionado.
ANGLE
AUDIO
•
Para seleccionar los ángulos
de cámara en un disco.
------
• Para seleccionar idiomas
de audio en un disco.
• Para seleccionar
ESTÉREO, L-ch o R-ch.
Para cambiar el idioma en la pantalla
3
1
•
Para borrar los marcadores.
• Para borrar los
marcadores.
• Para eliminar el Nº de
estado en la entrada de
programa.
• Para borrar los números
mal entrados.
• Para borrar el punto para la
repetición A-B.
Confirme que ha seleccionado “QUICK”.
POWER
SETUP
STOP
CLEAR
• Para borrar los números
mal entrados.
SETUP
• Para borrar el punto para
la repetición A-B.
QUICK
CUSTOM
INITIALIZE
DISPLAY
• Para mostrar el modo de
disco actual.
• Para mostrar el modo de
disco actual.
ENTER
• Para buscar en avance/ret-
roceso por un disco.
• Para buscar en avance/
retroceso por un disco.
REV
FWD
•
Para empezar la reproducción
en avance lento/retroceso
durante el modo de pausa.
2
3
Confirme que ha seleccionado “PLAYER MENU”.
SETUP
QUICK
MENU
• Para llamar el Menú en un
disco.
------
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
ENGLISH
4:3 LETTER BOX
BITSTREAM
• Para activar/desactivar el
nivel del negro.
• Para activar/desactivar el
ambiental virtual.
• Para disponer el orden
de reproducción o la
reproducción aleatoria.
• Para activar/desactivar el
ambiental virtual.
MODE
ENTER
OPEN/CLOSE
• Para abrir o cerrar la
bandeja del disco.
• Para abrir o cerrar la
bandeja del disco.
Seleccione el idioma deseado para las indicaciones en la pan-
talla.
PLAYER MENU
ENGLISH
FRANÇAIS
ENTER
• Para hacer una pausa en la • Para hacer una pausa
PAUSE
reproducción.
en la reproducción del
disco.
ESPAÑOL
• Para avanzar la reproduc-
ción un cuadro cada vez.
• Para empezar la reproduc-
ción del disco.
• Para empezar la
reproducción del disco.
ENTER
PLAY
POWER
• Para encender o apagar la
unidad.
• Para encender o apagar
la unidad.
4
Para salir del menú
SETUP
• Para reproducir
repetidamente un capítulo
o título.
• Para reproducir
repetidamente una
canción o disco.
REPEAT
• Para volver a la operación
anterior en el menú.
• Para volver a la
operación anterior en el
menú.
RETURN
Reproducción
4
• Para buscar un capítulo,
título o tiempo.
• Para colocar o buscar los
marcadores.
•
Para buscar una canción.
SEARCH
MODE
• Para buscar el tiempo.
• Para colocar o buscar los
marcadores.
Antes.
¡
Encienda el televisor, amplificador y otros equipos conectados a esta unidad.
Asegúrese que el televisor y el sintonizador de audio (de venta en los comer-
cios) están en el canal correcto.
SETUP
• Para llamar el menú de
ajustes de DVD.
• Para llamar el menú de
ajustes de DVD.
SKIP
• Para saltar capítulos o
titulo.
• Para saltar canciones.
1
3
2
Ponga un disco
con la etiqueta
hacia arriba.
POWER
OPEN/CLOSE
SEARCH
MODE
DISPLAY
OPEN/CLOSE
POWER
• Para parar la reproducción.
• Para parar la
reproducción.
STOP
1
3
1
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
1
4
2
5
8
0
3
6
SUBTITLE
• Para seleccionar subtítulos
en un disco.
7
9
------
------
------
CLEAR
+10
PAUSE
SLOW
SKIP
TOP MENU
• Para llamar el menú inicial
en un disco.
PLAY
Para empezar la 4 Para parar la
REV
FWD
STOP
TOP MENU
reproducción
reproducción
4
SETUP
MODE
ZOOM
MENU
ZOOM
• Para ampliar la imagen de
vídeo en DVD. (x2 / x4)
ENTER
STOP
RETURN
PLAY
ES
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
5
Quick Use Guide
Disc
Button
Connections
1
(Alphabetical order)
1
4
7
2
5
8
0
3
6
• To select chapter or title • To select track
directly. directly.
If your TV has AUDIO/VIDEO input jacks, see the section
“Connection to a TV” on page 6 of the Owner’s Manual. If
not, see the section “Connecting to RF Modulator” on the
front page of the Owner’s Manual.
9
+10
• To move the cursor and • To move the cursor
ENTER
determine its position.
and determine its
position.
Installing the Batteries for the Remote Control
2
1
2
3
A-B
•
To repeat between your
chosen point of A and B.
•
To repeat between your
chosen point A and B.
ANGLE
AUDIO
• To select camera
angles on a disc.
------
• To select audio lan-
guage on a disc.
• To select STEREO,
L-ch or R-ch.
To Change the On-Screen Language
3
1
• To clear the markers.
• To clear the numbers.
• To cancel the point for
A-B repeat.
• To clear the markers.
Confirm that “QUICK” is selected.
•
To remove status
POWER
number in program input.
SETUP
CLEAR
STOP
• To clear the numbers
entered incorrectly.
• To cancel the point
for A-B repeat.
SETUP
QUICK
CUSTOM
INITIALIZE
DISPLAY
• To display the current
disc mode.
• To display the current
disc mode.
• To search forward/back- • To search forward/
ENTER
ward through a disc.
• To begin slow forward/
reverse playback in the
pause mode.
backward through
a disc.
REV
FWD
2
3
Confirm that “PLAYER MENU” is selected.
MENU
• To call up the Menu on
a disc.
SETUP
QUICK
ENGLISH
4:3 LETTER BOX
BITSTREAM
------
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
• To set black level on/off. • To arrange the
• To set virtual surround
on/off.
playing order or play
randomly.
• To set virtual sur-
round on/off.
MODE
ENTER
OPEN/CLOSE
• To open or close the
disc tray.
• To open or close the
disc tray.
Select the desired language for the On-Screen Display.
PLAYER MENU
ENTER
• To pause disc playback. • To pause disc play-
ENGLISH
FRANÇAIS
ESPAÑOL
PAUSE
• To advance playback
one frame at a time.
back.
• To begin disc playback. • To begin disc play-
back.
PLAY
ENTER
POWER
• To turn the unit on/off.
• To turn the unit on/off.
4
To exit the menu
SETUP
REPEAT
• To play a chapter or title • To play a track or disc
repeatedly.
repeatedly.
RETURN
• To return to the previ-
ous operation in menu.
• To return to the previ-
ous operation menu.
Playback
4
• To search chapter, title
or time.
• To set or search the
markers.
• To search tracks.
• To search time.
• To set or search the
markers.
SEARCH
MODE
Before:
SETUP
Turn on the TV, amplifier and any other equipment which are connected to this
unit. Make sure the TV and audio receiver (commercially available) are set to
the correct channel.
• To call up the DVD
setup menu.
• To call up the DVD
setup menu.
SKIP
• To skip chapters or
titles.
• To skip tracks.
POWER
OPEN/CLOSE
1
3
2
Insert a disc
with label fac-
ing up.
SEARCH
MODE
DISPLAY
1
3
1
• To stop playback.
• To stop playback.
STOP
AUDIO
SUBTITLE
ANGLE
REPEAT
A-B
OPEN/CLOSE
POWER
1
4
2
5
8
0
3
6
SUBTITLE
7
9
• To select subtitles on
a disc.
CLEAR
------
------
------
+10
PAUSE
SLOW
SKIP
TOP MENU
• To call up the Top Menu
on a disc.
PLAY
REV
FWD
STOP
TOP MENU
To start
playback
4
To stop
playback
4
SETUP
MODE
ZOOM
MENU
ZOOM
ENTER
• To magnify part of a
picture. (x2/x4)
RETURN
STOP
PLAY
Printed in China
1VMN22542 / E6AC0UD ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|