Under Cabinet
CD Clock Radio with Remote
MODEL SCR2608
INSERUCTION MANUAL
Operating Instructions
BEFORE OPERATION THIS PRODUCT, READ, UNDERSTAND,
AND FOLLOW THESE INSTRUCTIONS.
Be sure to save this booklet for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Object and Liquid entry-Care should be taken so that objects do not fall and liquids are not spilled into the
housing.
Damage Requiring Service-The appliance should be serviced by qualified service personnel when:
The Power-supply cord or the plug has been damaged; or
Object have fallen or liquid has been spilled into the appliance; or
The appliance has been exposed to rain ; or
The appliance does not appear to operate normally or exhibits a marked changed in performance ;or
The appliance has been dropped or the housing damaged.
•
•
•
•
•
Servicing-The user should not attempt to service the appliance beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.
Do not take the unit apart. The laser beam used in the unit could harm your eyes.
Do not insert pins or other objects inside the unit . This unit is equipped with a safety device which
automatically turns the laser beam off when the disc compartment is opened. If a pin or other metal
objects get inside the unit, this safety device may be deactivated.
Do not drop the unit or subject it to strong shocks. Doing so could result in damage.
Do not place the unit in the following:
Locations where the temperature is high . The unit’s housing may warp or the unit may otherwise be
damaged if it is placed in direct sunlight, near heaters (where the temperature is 1400F/600C or greater) or
in cars with the windows closed.
•
•
•
In humid or dusty locations
In locations exposed to heavy vibrations
On unstable or tilted surfaces.
CAUTION:
*
This product is equipped with a polarized plug (one blade is wider than the other blade) as a safety feature
to reduce the risk of electrical shock. This plug will fit into a polarized outlet only one way. This is a
safety feature. If you are unable to insert the plug into the electrical outlet, try reversing the plug. If the
plug still does not fit, contact a qualified electrician. Never use the plug with an extension cord unless the
plug can be fully inserted into the extension cord. Do not alter the plug. Do not attempt to defeat the
safety purpose of the polarized plug,
*
Use of controls or adjustments or performance of procedures other than those specified herein may result
in hazardous radiation exposure.
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet the safety standards of the Federal Communications Commission(FCC)
and to comply with the safety performance requirements of the U.S. Department of Health and Human Services and with the
Food & Drug Administration(FDA) Radiation performance Standards 21 CFR Subchapter J.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION REQUIRED BY THE FCC
Since the Compact Disc (CD) circuitry may cause interference to other radios nearby, switch this set off when not in use or
move it away from the affected radios.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference; and (2) this device must accept any interference received , including interference that may
cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio elevation reception, which can be determined by turning the
equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures;
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help
LASER SAFETY
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM DESIGNED
WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE. EXPOSURE TO THIS
INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO THE EYES. THIS COMPACT DISC
PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED
SERVICE PERSONNEL. THE LASER MECHANISM IN THE SET CORRESPONDS TO THE
STYLUS (NEEDLE) OF A RECORD PLAYER. ALTHOUGH THIS PRODUCT USES A LASER
PICK-UP LENS, IT IS COMPLETELY SAFE WHEN OPERATED ACCORDING TO THE
MANUFACTURER’S INSTRUCTIONS CONTAINED HEREIN.
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
1. LCD DISPLAY- A (for CD, CLOCK AND RADIO)
2. VOLUME DOWN
13. FAST FORWARD (SKIP >>|) BUTTON
14. REWIND (SKIP |<<) BUTTON
15. STOP/ RADIO BAND BUTTON
16. PLAY/PAUSE BUTTON
3. VOLUME UP
4. CD DRAWER
5. REMOTE SENSOR
17. RADIO BUTTON
6. POWER ON INDICATOR
18. CD BUTTON
7. POWER/ ALARM OFF BUTTON
8. CD DRAWER OPEN/CLOSE BUTTON
9. LCD DISPLAY B (FOR TIMER)
10. MINTUE SET BUTTON (FOR TIMER)
11. HOUR SET BUTTON (FOR TIMER)
12. STEREO/MONO BUTTON (FOR FM RADIO
ONLY)
19. DISPLAY/ALARM SET BUTTON
20. MEMORY/CLOCK ADJUST BUTTON
21. REPEAT/MEMORY. RECALL BUTTON
22. BATTERY DOOR(FOR CLOCK BACK UP)
23. AC POWER CORD
24. POWER WIRE HOLDER
25. FM ANTENNA
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
1. OPEN /CLOSE KEY
10. SNOOZE KEY
2. PLAY/PAUSE KEY
11. ALARM SET KEY
3. FAST FORWARD (SKIP >>|) BUTTON
4. VOLUME UP KEY
12. SLEEP KEY
13. EQUALIZATION PRESET KEY (EQ)
14. REPEAT KEY
5. VOLUME DOWN KEY
6. REWIND (SKIP |<<) BUTTON
7. RANDOM KEY
15. FUNCTION KEY ( to select the CD, Radio function)
16. STOP/RADIO BAND KEY
17. POWER/ ALARM OFF KEY
18. Battery compartment (for Remote control)
8. MUTE KEY
9. CD/ RADIO MEMORY KEY (MEM)
Insert two(2) “AAA”/1.5V(not included) batteries following the polarity as indicated in the compartment to
the right. Alkaline batteries are recommended for long using time.
Note: when planning not to use the remote control for a long time. Remove the batteries in order to avoid the
electrolyte leakage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Under Cabinet Mounting Instructions
z
z
z
z
z
z
z
z
z
Tools Required
Drill and 1/4” Drill Bit
Ruler or Tape Measure
Nail or Awl
Scissors
Screwdriver – Phillips
Countersink (Optional)
Masking Tape
Safety Glasses
Download from Www.Somanuals.com. All Manuals Search And Download.
1 – Mounting template
Parts Packed with your unit
1. Spacers (3pcs of 1/4” , 3pcs of 1/2”, 3pcs of 1”)
2. Washers (3pcs)
3. Phillips head screws (3pcs of 2 3/4”, 3pcs of 1 5/8”)
4. Mounting Template
Before Mounting
Empty contest of the selected cabinet under which the unit will be mounted and thoroughly clean the underside
of the cabinet to remove any grease residue which might be present. We recommend the unit be mounted at the
front edge of the cabinet.
Important: For secure mounting, the screws must go into the radio to a depth of at least 3/8”. If the overall
length from the bottom of the cabinet shelf to the bottom of the over hand is more the 1 3/4”. Then a wood shim
will be necessary. A shim can be made from a sheet of plywood, using the Template to located the central lines
for drilling the 1/4” mounting holes; the shim can be located between the cabinet shelf bottom and spacers.
Make sure the wood is at least as thick as the excess over 1 3/4” if a shim is necessary, longer screws are
required.
Longer screws (Type#10-32) are available at most local hardware stores
Cut out the template on the line indicated. The template size and the screw hold positions are identical to the
top of the Clock radio.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting Procedure
Step 1.
If your cabinet does not have a overhang:
a) Position template in desired location on underside of cabinet, flush with front edge.
b) Then tape template in pace and go to step 2.
If your cabinet have overhang:
a) Measure the thickness of the overhang.
b) Fold front of the template downward along the printed guideline that is closet to the thickness of your
cabinet.
c) Tape fold-down portion to backside of overhand, tape template to cabinet underside.
Note: If your cabinet has glue blocks or other obstructions, cut out corresponding areas on the template to clear
them. Do not cut or cut through the screw holes indicated on the template.
CAUTION: It is recommended that safety glasses be worn while drilling screw holes to prevent the possibility
of eye injury.
Step 2
Drill 1/4” inches diameter holes through the underside of the cabinet bottom shelf using the three points marked
on the template.
Download from Www.Somanuals.com. All Manuals Search And Download.
Helpful Hints:
On wooden cabinets you may want to mark and start the drill holes with a nail or an awl. Be sure to hold the
drill very firmly against the cabinet to reduce “walking” of the drill bit from the markings.
Using masking tape above the hole locations on inside of wooden cabinet shelf to help reduce splintering.
If installing the unit under a wood cabinet, you may wish to countersink the drilled hold for the INSIDE of the
cabinet if a countersink the holes use the supplied washers.
Step 3
Remove template and clean drill shavings from inside and underside of cabinet.
Step 4
If your cabinet does not have an overhang. Go to Step 5.
If your cabinet has an overhang. Select the spacer or combination of spacers that is equal to or longer than the
cabinet overhang.
Step 5.
Insert screws from inside the cabinet. The washers must be used on metal cabinets, and on wood cabinets if you
did not countersink the drilled holes. Position washers, flat side down, and place screws into the holes.
If your cabinet does not have an overhang, go to Step 7.
Step 6.
Hold screw heads down while you push the selected spacers onto the screws under the cabinet. Be sure to push
up spacers until they fully nested (if more then one is in used)
Step 7
Align radio under the screws. Hold the screw holes in the top of the clock radio against the mounting screws
and partially tighten the screws.
Do not fully tighten until all 3 screws have been started. (The top front edge of the clock radio should clear the
overhang.)
Power Wire Holder
It is for rounding the extra power wire after user had plugged the power cord to the electrical outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
FULL LCD DISPLAY
UNIT POWER SUPPLY ( Mains 120V/60Hz)
Connect the power cable plug to the (120V) wall outlet.
Warning:
Before using the unit. Check that the local mains supply is compatible with the HI-FI System (120V 60Hz)
Do not plug or unplug the power cable when your hands wet.
When planning not to use this unit for long periods of time (i.e Vacation etc.) disconnect the plug from the wall
outlet.
When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in order to avoid
shock risks caused by the damaged cable.
Battery Safety Precautions:
●
●
●
Keep batteries away from children and pets.
Do not use rechargeable batteries with this product.
Insert the battery observing the proper polarity (+/-). Failure to properly align the battery polarity can
cause personal injury and/or property damage.
●
Remove spent or discharged batteries from the product. Remove the battery when the product will not
be used for extended periods of time to prevent damage due to rusted or corroded batteries
Never throw batteries into a fire, Do not expose batteries to fire or other heat sources
Battery Disposal: Spent or discharged batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local country solid waste
authority
●
●
●
Follow the battery manufacturer’s safety, usage, and disposal instructions.
Battery Backup:
One DC 9V batteries (not included) may be installed as a backup option to maintain the time if electrical
power fails. In the event of a power outage, the time will not appear on the clock LCD Display, however
the clock will continue to operate and the actual time will be maintained. The Clock LCD Display and
other functions will resume once electrical power is restored if used the backup battery; Remove the
battery if the clock is not used or stored for long periods of time
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK SETTING
1. While in the CD or Radio mode, Press “Display/AL.Set” two time to enter the time mode.
2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to hour adjustment mode( Hour will begin to flash)
3.
Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm -> 9:27am)
4. Press MEMORY/C-ADJ button, enter to minute adjustment mode.( Minute will begin to flash)
d . Press SKIP >>| or SKIP |<< button to desired time. (e.g. 9:27am -> 9:20am) e) and then press MEMORY/C-ADJ button,
finish clock adjustment.
NOTE:
For 12 Hour display, If the time is pm, then PM icon will appear.
And “ AM” will not indicate on the display
Time setting is invalid if the time always flashes.
Download from Www.Somanuals.com. All Manuals Search And Download.
ALARM TIME SETTING
1. While in the CD or Radio mode, Press “Display/AL.Set” one time to enter the alarm time set mode. (The bell icon “
will appear and begin to flash)
”
2. Press and hold MEMORY/C- ADJ button for 2 seconds, enter to alarm hour adjustment mode (Alarm hour will begin
to flash)
3. Press SKIP >>| or SKIP |<< button to desired time. (e.g. 10:27pm -> 9:27am)
Press MEMORY/C-ADJ button, enter to alarm minute adjustment mode. ( Alarm minute will begin to flash)
Press SKIP >>| or SKIP |<< button to desired time. (e.g. 9:27am -> 9:20am) and then press MEMORY/C-ADJ button,
finish clock adjustment.
After setting the alarm time.
TO WAKE UP TO ALARM BUZZER:
a. Press AL.SET KEY (on the remote controller) repeatedly to select Buzzer mode. (“BUZZ” indicator
will appear)
b. The alarm buzzer will sound for 3 minutes at the set alarm time.
c. Press Power/AL.Off button to turn off the alarm when it sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
TO WAKE UP TO CD:
a. Power on the unit by pressing the Power/AL. off button.
b. Open the CD DRAWER and insert a CD (with the label side facing up) into the CD compartment.
c. Close the CD DRAWER.
d. Power off the unit by pressing the Power/AL. off button.
e. Press AL.SET KEY (on the remote controller) repeatedly to select CD mode. (“CD” indicator will
appear and cd indicator will begin to flash)
f. You can use SKIP >>| or SKIP|<< to select the track as be auto-played during the flashing of “cd”
indicator in the display.
g. The CD will sound at the set alarm time playing the track you have selected on the CD.
h. To deactivate the alarm (CD playing); Press either the STOP Button or Press the Power/AL. off button.
TO WAKE UP TO RADIO:
a. Power on the unit by pressing the Power/ AL.off button.
b. Press the RADIO button to select RADIO.
c. Press the STOP/Band button to Select AM or FM .
d. Tuning your favorite radio station and your desired listening level.
e. Press POWER/ AL. OFF button to turn off the unit again.
f. Press AL.SET KEY (on the remote controller) repeatedly to select tuner mode. (“tuner” indicator will
appear )
g. The radio will sound at the set alarm time.
Snooze Function
If you want to snooze a few more minutes press the SNOOZE BUTTON (on the remote control) will deactivate
the sound for 9 minutes.
SLEEP FUNCTION
Sleep time step change for PRESSING AND HOLDING SLEEP KEY (on remote control):
90->80->70->60->50->40->30->20->10->9->8->7->6->5->4->3->2->1->90
Sleep appears in display->sleep function activate
To cancel sleep function, Press sleep key (on remote controller) one more time
Sleep disappears in display-> cancel sleep function
When the SLEEP time expires, the system will automatically turn OFF.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER FUNCTION (0:01 --------19:59)
1. Continue press the HOUR SET button (T/HOUR) adjust the hour of the time. (from 19: --to 0: --)
2. Continue press the MINUTE SET button (T/MIN) adjust the minute of the time. (from --:59 to -- : 00)
3. When the count-down time reach to zero, the system will alarm for 3 minutes
4. To tune off the timer alarm. Simply PRESS and HOLD the Hour set button (T/HOUR) and Minute set
button (T/Minute) for 3-5 seconds the timer will be turn off.
Note: The radio or CD player is muted when alarm turns on
VOLUME
Adjust the VOLUME to the desired level by pressing the VOL. DOWN or VOL. UP button and volume
message will hold 2 seconds on screen after level change.
MUTE
To Mute the volume, Just press the Mute KEY (On the remote controller).
Volume Mute On
Volume Mute Off
Notes:
1) The volume range is [01, 40].
EQUALIZATION PRESETS
While in play mode, pressing the EQ button selects five different types of equalization effects:
Flat, Jazz, Rock, Classic and Popular, Press the EQ button repeatedly to cycle through the presets, the default setting is flat.
LISTENING TO THE RADIO
There is a power switch (POWER/AL. OFF button) to switch on and off the system.
Power on in tuner mode
Power-off (clock display)
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO SECTION
RADIO RECEPTION
NOTE: In Radio operation mode, press Display/AL.Set button to display the clock time.
1. Press Power/AL. off button to turn on the unit.
2. Press RADIO button to select radio.
3. Select AM/FM band by pressing the STOP/BAND button. AM and FM are alternately selected each time when the
STOP/BAND button is pressed.
4. How to use the buttons for radio
a. Manual Tuning
----Higher frequency can be selected by pressing the “SKIP >>|” button
----Lower frequency can be selected by pressing the “SKIP |<<” button
b. Automatic Tuning
-----Press and hold the “SKIP >>|” or “SKIP |<<” button until the display frequency starts run.
-----When a station of sufficient strength has been found. Tuning will stop or you can stop the automatic tuning by pressing
“SKIP >>|” or “SKIP |<<” button again.
-----Repeat until you have found the desired station.
5. Adjust the volume to the desired level. by pressing VOL. UP or VOL. DOWN button.
6. Press the STEREO/MONO button to select Stereo and Mono as desired in case FM band is being selected. (If stereo signal
is too weak , “<<ST>>” icon will not appear, press this button to mono mode, the reception will be improved)
Note:
For better reception, FM wire antenna shall be fully untied and adjusted well.
This unit has a built-in antenna for AM, Locate the unit where you can obtain the best reception.
PRESET TUNING
1. Select the AM/FM band and tune to your desired station according to the normal tuning procedure.
2. Press the MEMORY/C-ADJ button, “P” will appear and flash in the LCD, Then use SKIP >>| or SKIP |<< button to change
the number where the station will be stored. (NO.1 to NO.15)
3. Store the current frequency by pressing MEMORY/C-ADJ button again when you get the desired number. (The “P” still
appears and will not flash.)
4. Repeat the same procedure to set other desired frequencies into Memory No.1 to NO.15
Remarks: A stored frequency can only be erased by storing another frequency in its place.
The unit can be preset up to 30 stations. (15 for AM and 15 for FM)
MEMORY RECALL
To recall the stored frequencies, Enter AM or FM band mode first, press REPEAT/MEM/RCL button first then use SKIP >>| or
SKIP |<< button to select 1 to 15 station as desired.
[NOTE:] As stored frequencies can only be stored for long time with the power
supplying, The station you stored will be lost and can not be recalled in case that you
cut off the AC power
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION OF CD PLAYER
Power ON in CD mode and indicate the total tracks which contain in the disc
If open the CD DRAWER or there is no disc inside the unit, “00” display will be indicated on the display.
PLAYING A CD
1. Turn on the unit by pressing the POWER/ AL. OFF button
2. Press CD button to select CD function.
3. Press Open/Close button to open the CD drawer.
4. Insert a CD with the label facing up.
5. Close the CD Door by pressing Open/Close button.
TOC reading (“- -” indicator will begin to flash)
After TOC reading
6. Press PLAY/PAUSE button to start CD playback from the first track.
7. Press once more PLAY/PAUSE button to momentarily pause
Pausing (“ cd: 1” indicator will begin to flash)
Notes: While in the Pause mode. SKIP |<< scan or SKIP >>| scan can in use to rewind or go to next song.
8. To stop the playback, Press STOP/BAND button .
Download from Www.Somanuals.com. All Manuals Search And Download.
SKIPPING TRACKS
Press during play.
Backward------------SKIP |<< button
Fast Forward------------SKIP >>| button
Press SKIP |<< button twice to skip to the beginning of the previous track.
Press SKIP >>| button once to skip to the beginning of the next track.
SEARCHING TRACKS
Press and hold during play
Backward------------SKIP |<< button
Fast Forward------------SKIP >>| button
PROGRAMMED PLAYBACK
Up to 20 tracks can be programmed in to play in any desired sequence.
1. Turn on the unit by pressing the POWER/ AL. OFF button.
2. Press the CD button to select CD function.
3. Press Open/Close button to open the CD door.
4. Insert a CD with the label facing up
5. Close the CD Door by pressing Open/Close button.
6. In CD stop mode, Press MEMORY/C-ADJ button until “MEMORY” “Cd :01” is displayed in display.
7. Press SKIP >>| button or SKIP |<< button to select a desired track to be memorized.
8. Press MEMORY/C-ADJ button to program the track.
9. Repeat steps 7 and 8 to program tracks.
10. Press PLAY/PAUSE button to start playing.
To cancel program play, Press STOP/BAND button two times.
REPEAT PLAY
To Repeat Single Track
Press REPEAT/MEM/RCL button while the track you want to repeat is playing. The “REPEAT” flashing will
appear in display.
------To repeat another track, Press SKIP >>| button or SKIP |<< button.
------To cancel repeat play, Press REPEAT/MEM/RCL button two times.
To Repeat all the tracks
Press REPEAT/MEM/RCL button twice during play. The “REPEAT” indicator will appear in display steadily.
------All tracks will be played through in sequence and then the sequence will be repeated continuously.
-------To cancel repeat play, press REPEAT/MEM/RCL button one time.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
You experience a problem with this unit check the chart below before calling of service.
SYMPTOM
System will
Not turn on
CAUSE
---AC Cord not connected
properly
SOLUTION
Reinsert the AC cord
---Disc inserted incorrectly
---Defective compact disc
---CD compartment not closed
---Moisture condensation
on disc
---Reinsert disc with label
side facing up
---Try another compact disc
---Close CD compartment
---Wipe disc with soft cloth
---Clean or replace disc
Disc will not
Play
Erratic CD
playback
---Dirty or defective disc
No sound
---Volume set to minimum
---Defective compact disc
----Increase the volume
---Try another compact disc
Noise or Sound ---Station not tuned properly for ---Retune AM or FM broadcast
distorted on radio
AM or FM
station
---Unit is not positioned
correctly
---Rotate unit until best reception
is obtained
CARE AND MAINTENANCE
CARING FOR COMPACT DISCS
---To keep the CD clean, handle it by its edge. Do not touch the surface.
---Do not stick paper or tape onto the CD
---Do not expose the CD to direct sunlight or heat sources such as holt air ducts.
Do not leave the CD in a car parked under direct sunlight.
Cleaning the Unit
---To prevent fire or shock hazard , disconnect your unit from the AC power source when cleaning.
---The finish on your unit may be cleaned with a dust cloth and cared for as other furniture .Use caution when
cleaning and wiping the plastic parts.
---Mild soap and a damp cloth may be used on the front panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
|