DVR4-1100™
4CH Digital Video Recorder
SW242-LP4 / SW242-LPN
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5.10 Miscellaneous Menu - Password Change ....................... 9
5.11 Miscellaneous Menu - Color Set..................................... 9
5.12 Miscellaneous Menu - Time Set.................................... 10
5.13 Hard Disk Set.......................................................................................10
5.14 Motion Set..............................................................................................11
5.15 Video Mode...........................................................................................12
5.16 Factory Reset........................................................................................12
6. Recording
6.1
6.2
6.3
Start Recording....................................................................................12
Stop Recording....................................................................................13
Recording Time on Hard Drive ..................................................13
7. Playback.............................................................................. 14
8. USB Programming............................................................. 15
8.1 PC Viewer Program........................................................ 15
8.2 Program Buttons ............................................................ 15
8.3 PC Backup ...............................................................................................16
9. Specifications...................................................................... 17
10. Appendix
10.1 System Connection Diagram......................................... 18
10.2 DVR Accessories (included)......................................... 18
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 1: DVR Features
z 4 Channel BNC Camera Input
z 1 Channel BNC Video Output
z Video Source Option: NTSC / PAL
z Motion Detection with Sensitivity and Area Settings
z Time Schedule Recording / Motion Triggered Recording
z One ATA-100 Hard Disk Interface
z USB 2.0 Back up to computer
z With Remote Control & Removable Hard Drive Tray
Chapter 2: Layout
2.1 Front Panel
IR Receiver
Removable HDD Tray
HDD Lock
Stop
CH1
CH2
CH3
CH4
Quad
Channel #1
Channel #2
Channel #3
Channel #4
Quad View
Rewind
Stop recording / playing back
Record
REC
Menu/Esc
SEL/Edit
Up
Enter / exit setup menu
Select / modify item
Move up / left cursor
Move down / right cursor
Power indicator
REW
Down
Pause
Play
PWR
HDD
Pause
Play recorded video
Forward
Hard disk drive indicator
FWD
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
2.2 Rear Panel
1 BNC video output
4 BNC video inputs
Fan
Power Supply Input
Grounding Terminal
USB Port is located on the right side of the case.
2.3 Remote Controller
CH1
CH2
CH3
CH4
Quad
Select or enlarge Channel #1
Select or enlarge Channel #2
Select or enlarge Channel #3
Select or enlarge Channel #4
Quad View
Rewind
Play recording list
Forward
Record
Pause
Stop recording / playing back
Enter or exit setup menu
Move up / left cursor
Select / modify item
Move down / right cursor
Menu
SEL
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 3: Installation
3.1 Installing Hard Drive
1. Unplug the power supply. Don’t install or uninstall HDD when DVR is on!!
2. Slide the HDD tray out of DVR body carefully.
3. Connect the power cord and data cable to hard disk drive.
Make sure the HDD is set to be MASTER according to the hard drive manual.
The 4 pin connection is the DC power cable for HDD, and the wider cable is the standard
hard drive IDE type connection.
4. Insert the HDD tray into DVR body tightly.
5. Lock the HDD tray.
Lock the caddy by turning the key clockwise.
If you need to unlock the tray, turn the key anti-clockwise.
CAUTION:
1. If you do NOT lock the HDD tray, the DVR system might not function properly.
2. Do not remove the HDD tray while the DVR is on!
3.2 Connecting Camera and Monitor
There are 4 camera inputs and 1 video output with BNC connectors (Refer to
2.2 Rear Panel).
3.3 Connecting Power Supply
Please only use the power adapter supplied with the DVR. The standard power
supplied to the DVR is DC 12 Voltage, 3 Amperes.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 4: System Boot
4.1 Detecting Installed Hard Drive
After connecting the power, the system
will boot-up and detect the installed hard
drive.
Checking HDD ……
MASTER…
On the screen it will show the hard drive
information.
4.2 Recovering Lost Data
RECOVER HDD?
04811-101735
A power error can cause data to be lost,
and the DVR system will automatically
recover lost data after power is reconnected.
(SELECT)YES/(MENU)NO
4.3 Restore Recording Feature
If a power error occurs during
recording process, the system will
automatically resume recording after
power is reconnected.
Power Error Detected
Restore Hard Disk (Master) OK
Restore REC Mode…………OK
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
4.4 Main Screen
While the DVR is running, the
10%
monitor will display the view from the
cameras as following:
Upper left: Percentage of used hard drive
space
Middle: Channel name (CH1 through
CH4)
1
3
2
4
Bottom right: Date and Time
Bottom left: System status. (Refer to 6.1
Start Recording)
EACH REC [M] <T> 2008/08/08
Chapter 5: DVR Setup
＞
5.1 Setup Menu
Menu Directory
CAMERA SELECT
RECORD SELECT
RESOLUTION
RECORD FRAME
RECORD QUALITY
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
MOTION SET
MAIN
MENU
AUTO RECORD
PASSWORD ENABLE
PASSWORD CHANGE
COLOR SET
TIME SET
VIDEO MODE
FACTORY RESET
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
MAIN MENU
CAMERA SELECT
1 2 3 4
1 2 3 4
EACH
25
[
Menu]: enter system menu
RECORD SELECT
RESOLUTION
RECORD FRAME
RECORD QUALITY
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
MOTION SET
HIGH
[ Up] and [ Down]: move the cursor
[ SEL]: select/modify settings
VIDEO MODE
FACTORY RESET
PAL
[
Menu]: press again to exit
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
5.2 Camera Select
The DVR system can display 4
cameras feed in one picture (Quad Mode).
You can configure which camera is
displayed.
Press [ SEL] to modify setting, or
press [CH1], [CH2], [CH3] and [CH4] to
set each channel separately.
If a channel is disabled, the system will display “OFF” on the monitor,
meanwhile, this channel won’t be selected to record. (Refer to 5.3 Record Select)
5.3 Record Select
Configure which channel is allowed to record.
Note: If no channels are selected, an error message will appear briefly on the
screen when record is selected.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
5.4 Resolution
There are two modes of resolution for video recording:
EACH Mode:
The DVR compresses and records each video channel separately so you can
enlarge a single channel to full screen display and still be recording on all channels.
You can also record on specific channels, for example, you can turn off the record
function of CH1 and CH2 and then the system will only record video on CH3 and
CH4.
Press [CH1], [CH2], [CH3], and [CH4] enlarge relative channel to full screen
display.
In EACH Mode you can use the Auto Switch Function.
Auto Switch Function:
When the system is in live mode or recording mode, press the [QUAD] button
and hold for three (3) seconds to make each video channel enlarge to full screen.
The full screen will be displayed for three (3) seconds, including Quad view.
The switch will lasts until any button is pushed.
For example, [ Stop] will stop the switch and may stop the recording
depending on Record Schedule Settings (5.7 Schedule Set).
QUAD Mode:
The DVR will compress and record all 4 video channels into one file, therefore,
you cannot enlarge a single channel to full screen in play back mode or live
monitoring mode.
Auto Switch Function is not available in QUAD Mode.
5.5 Record Frame
Record frame will affect the movement of objects in recorded video. More
frames per second gives smoother movement and uses more hard disk space.
System default value is 30fps (frames per second) for NTSC (PAL is 25fps),
which means the system will record 30 frames per second shared by all cameras.
You can set frame rate for NTSC to 30,15,10,7,5,4,3,2,1 frames per second (PAL is
25,12,8,6,4,3,2,1)
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
5.6 Record Quality
There are three levels of recording quality: High, Normal, and Low.
Higher quality uses more hard drive space.
Record frame rate, record quality and available hard drive space will affect the
total recording time of the DVR system.
5.7 Schedule Set
You can set video recording method by Time and Motion Detection Triggered
Recording.
“-” No Recording
SCHEDULE SET
“T” Time (System Default)
TTTMMMTTTTTTMMTTTTT--MMT
│
│
│
│
│
│
│
│
│
“M” Motion Detection Triggered
[ Up] and [ Down]: To move the cursor
[ SEL]: To modify record method
Numbers along bottom indicate the 24
hours of a day
0
3
6
9
12 15 18 21 24
PRESS (UP，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
For example:
If you want to record by motion detecton during 3 to 6 o’clock, please set the
time points (3, 4, 5, 6) from to be “M”; if you want to continuous record during 7 to
12 o’clock, please set the time points (7, 8, 9, 10, 11, 12) to be “T”.
Both of the two record methods need to be triggered by pressing [ REC]
button. After pressing [ REC] button, if the schedule is set to be “T” at that time,
DVR will start to record immediately; if the schedule is set to be “M”, DVR will
not start record until a motion is captured and detected by system.
Force Record：
When DVR is set to record by motion detection, DVR will not record if there is
no motion. If you want to record immediately, please press [ REC] button and hold
for 3 to 5 seconds, DVR will start force record.
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
5.8 Miscellaneous Menu-Auto Record
When the function is set to be “ON”, DVR will be awaked to record
automatically by record schedule if DVR is without any manual operations in five
(5) minutes.
When you choose “OFF”, DVR will not record until you press the [ REC]
button.
5.9 Miscellaneous Menu-Password Enable
When this option is set to be “ON”, you will be required to enter the password
if you want to stop recording or enter menu.
System default password: Press [CH1] button six (6) times.
5.10 Miscellaneous Menu-Password Change
All keys can be used as password
PASSWORD : - - - - - -
PASSWORD : - - - - - -
PASSWORD : - - - - - -
CURRENT
NEW
key except the [ Menu] key,
which is used to exit.
CONFIRM
If you forget your password,
please refer to 5.16 Factory Reset.
5.11 Miscellaneous Menu-Color Set
HUE: 0-99
SATURATION: 0-99
CONTRAST: 0-99
BRIGHTNESS: 0-99
HUE
50
50
50
50
HUE
50
50
50
50
SATURATION
CONTRAST
BRIGHTNES
SATURATION
CONTRAST
BRIGHTNES
[ Up] and [ Down]: move the cursor
[REW]: Increase value
[FWD]: Reduce value
HUE
50
HUE
50
50
50
50
SATURATION
CONTRAST
BRIGHTNES
50
50
50
SATURATION
CONTRAST
BRIGHTNES
[CH1-CH4, QUAD]: Select channel
(CH1-CH4,QUAD)SELECT CHANNEL
(<.>)MOVE (<<.>>) ADJUST (MENU)EXIT
[
Menu]: Exit
5.12 Miscellaneous Menu-Time Set
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
TIME SET
Configure system date and time:
∨
2008/08/08 20:08:08
[ Up] and [ Down]: move the cursor
[ SEL]: modify the value
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
[
Menu]: exit and save
5.13 Hard Disk Set
OVERWRITE ENABLED:
HARD DISK SET
If you choose “YES”, recording
continues and overwrites previous
recordings when the hard drive is full.
If you choose “NO", the
recording process will stop when the
hard drive is full.
OVERWRITE ENABLED
HDD SIZE
HDD USED
[YES]
120042MB
80865MB 77%
HDD FORMAT
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
HDD SIZE:
Indicates the total capacity of the hard drive installed in the DVR.
HDD USED:
Indicates the space used in the hard drive and the percentage of hard drive space
being used.
HDD FORMAT:
If you format the hard drive, it will erase all the data in the hard drive.
You need to input your password when you want to format the HDD.
Note: When you install a new hard drive in the DVR, please use this function to
format the hard drive.
MOTION RECORD TIME:
5.14 Motion Set
This number indicates how many
seconds the motion detection recording
- 10 -
lasts after the DVR has been triggered by
Download from Www.Somanuals.com. mAll oMatniuoanls.Search And Download.
User’s Manual
MOTION SET
MOTION RECORD TIME:
MOTION ALARM TIME:
10
OFF
MOTION SET
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU)
TO EXIT
MOTION SET:
SENSITIVITY:
MOTION DETECTION SET
Use [ Up] and [ Down] button to
select the channel you want to modify,
press [ SEL] to adjust sensitivity of
motion detection on each channel.
High (1----------9, OFF) Low
>CHANNEL
CHANNEL
CHANNEL
CHANNEL
1
2
3
4
SENSITIVITY
SENSITIVITY
SENSITIVITY
SENSITIVITY
4
4
4
4
CHANNEL
CHANNEL
CHANNEL
CHANNEL
1
2
3
4
AREA SET
AREA SET
AREA SET
AREA SET
When it’s “OFF”, the channel cannot
be triggered by motion.
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
AREA SET:
Use [ Up] and [ Down] button to select the channel you want to modify, press
[ SEL] button to enter the sensitive area of each camera. The picture of the
selected channel is divided into 144(12*12) blocks, press [REW] to move left,
press [FWD] to move right, press[ Up] and [ Down] to move the cursor up and
down, press [ SEL] to set the block active or not.
When the block is transparent, it’s active to record. When the block is covered
by shadow, it is not active, and motion in this area will NOT be detected.
Make sure Record Schedule is set to Motion for the times required.
5.15 Video Mode
Select NTSC or PAL video system.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
5.16 Factory Reset
Press [ SEL] button to reload factory defaults, then the DVR will reboot, all
custom settings (including password) will be restore to default.
Caution: There is no confirming dialog box for this selection after you
press [ SEL] button, please be prudent!
If you forget your password, please keep the system on main screen, and then
press [Pause] button for ten (10) times, the DVR will reset the system. Then the
default password is: [CH1] button six (6) times.
If the DVR is recording, please unplug the power supply and uninstall the HDD,
then connect power to boot DVR and press [Pause] button for ten (10) times.
Chapter 6: Recording
6.1 Start Recording
1
10%
3
R
R
R
R
1
3
2
4
2
4
8
6
5
7
EACH REC [M] (T) 2008/07/01 16:22:30
Press [ REC] to start recording (as set in 5.7 Schedule Set).
DVR will display system information on screen.
1. Hard Drive Usage (Displayed as a percentage)
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
2. Recording symbol (channel is currently recording)
3. Channel Name
4. Record Resolution (QUAD or EACH)
5. Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
6. HDD Info. ([M] Master Hard disk)
7. Record Schedule: (T) Continuous (M) Motion Detection (-) No Recording
8. The date and time on the DVR
6.2 Stop Recording
Press [ Stop] button to stop recording. If you have already activated the
password protection, you need to input the password.
6.3 Recording Time on Hard Drive
Estimated record time based on a 120GB Hard Drive (Quad Mode) in hours:
System
NTSC
Quality
HIGH
Frame Rate
20 K Bytes
15 K Bytes
12 K Bytes
30
58
78
97
15
117
155
194
7
1
251
332
416
1748
2330
2913
NORMAL
LOW
System
PAL
Quality
HIGH
Frame Rate
20 K Bytes
15 K Bytes
12 K Bytes
25
70
12
6
1
146
194
243
291
388
485
1748
2330
2913
NORMAL
LOW
93
117
You can calculate and estimate record hours by below formula:
120 (G Byte) × 1024 (M Byte) × 1024 (K Byte)
Divided by:
15 (Kbyte/frame) × 7 (frame/sec.) × 60 (sec.) x 60 (min.)
Estimated time would be 332 Hours.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 7: Playback
Press [ Play] button to play the latest recording.
During playback, press the [ Menu] button to list all recorded video clips
from the hard drive. Newest video will be listed at the top.
Press [ Up] and [ Down] to move the cursor and select an event, press
[ Play] button to start playback.
1. Starting time of the event
2. TIME: continuous record
3. MOTION: Motion Triggered event
5. “*” marks un-played video recording
4. FORCE: Force Record event
You can also play recorded video by searching exact date and time as following
steps:
1. Press [FWD] button to change the select mode
2. Press [ Up] and [ Down] button to select date starting time or ending time
3. Press [ SEL] to edit time value
4. Press [ Play] to play the video
2008 /0 1 / 0 8
08 : 30 : 3 2 --- 2008/0 1 / 0 8
Search Date and Time
- 14 -
16 : 00 : 05
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 8: USB Programming
Through connecting DVR and PC, you can use PC Viewer software to play
back and backup DVR recorded video.
8.1 PC Viewer Program
1. Put the USB Driver Program CD into your CD-ROM Drive
2. Open CD directory
3. Double click on the “PCViewerInstall.exe” file to install the PC Viewer software
4. Run the installed PC Viewer program
PC Viewer will detect the hard drive installed inside DVR automatically when
you connect the USB cable from DVR to PC.
8.2 Program buttons
1
2
3
4
5
6
7
8
15
10 11 12 13 14
16
17
18
9
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Item
Remark
1. DVR event list
2. Capture picture
3. Save video clip
5. Load video file saved in PC
6. DVR Mode*
Open event list recorded in DVR
Save an image of current frame
Save DVR’s video clip to PC in .mys/.avi file
Load .mys file saved in PC
To switch working mode between PC viewer
7. PC Mode*
mode and DVR viewer mode
CH1, CH2, CH3, CH4, QUAD
8. Channel selection keys
9. Playing scroll bar
10. Fast backward
11. Previous frame
12. Play backward
13. Pause
Play backward with fast speed
Move to previous frame
Play backward with normal speed
Pause playing
14. Play
Play forward with normal speed
Move to next frame
15. Next frame
16. Fast forward
17. Volume scroll bar
18. Exit
Play forward with fast speed
Not available for this model
Exit PC Viewer
‘ DVR Mode: play video clip save in DVR’s HDD.
‘ PC Mode: play video clip (.mys file) save in PC
8.3 PC Backup
Press
button to open the DVR recorded event list, and then select an
to start backup. The video file you want to save in PC can be
event, press
“.avi” file or “.mys” file.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 9: Specifications
ITEM
DESCRIPTION
NOTE
Video Format
NTSC / PAL
Operation System
Camera Input Channel
None
Stand-alone
4 channel Composite BNC
Video Output Channel
Display Frame Rate
1 channel Composite BNC
NTSC
120 frames/second
4×30 frames/second
4×25 frames/second
Quad Mode
PAL
100 frames /second
Max.30 fps (Quad)
Max.25 fps (Quad)
Each Channel =
NTSC
PAL
Recording Frame Rate
Quad Mode
NTSC
PAL
Max. 30 frames/s (Total)
Max. 25 frames/s (Total)
Recording Frame Rate
(Each Mode)
30 fps ÷ Number of Cameras
Each Channel =
25 fps ÷ Number of Cameras
Record Mode
Continuous, Time Schedule, Motion Triggered.
NTSC: 720×480
Display
PAL: 720×576
Resolution
Quad: 640×224 (total)
NTSC: 320×112, 640×224
Record
PAL : 320×136, 640×272
Each: 640×224
Low : 12K Byte
Normal: 15K Byte
High : 20K Byte
ATA -100 Interface
Video Co
Motion-JPEG
mpression Format
(12-20K bytes/frame)
HDD Support
Over 500G Byte
120GB Hard drive @ 7 frames per second @ Normal Quality
(120×1024×1024 Kbyte) ÷ ( 7×15×60×60 ) = 332 Hours
Estimated Record Length
USB
For PC playback & backup
Included
USB 2.0
Remote Control
Time、Date、Event
Method
Search
Full Screen
Dimension ( L × W × H )
YES
250 × 235 × 38mm
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
Chapter 10: Appendix
System Connection Diagram
10.1
DVR Accessories (included)
10.2
Power Cord
Power Adaptor
User’s Manual
The shape of the plug might
be different from different
countries or regions.
CD-ROM
Remote Controller
USB Cable
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|