Sunbeam Tower Fan
with Remote Control
Instruction Booklet
FA7450 99cm Tower Fan
Please read these instructions carefully
and retain for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sunbeam’s Safety Precautions
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also
exercise care when using an electrical appliance.
Listed below are important precautions for the
safe use of an electrical appliance.
• Do not use an appliance for any purpose
other than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch
any hot surface.
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove
by grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug
when the appliance is not in use and before
cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked
and tested by a qualified technician or
service person.
• Always use your appliance from a power
outlet of the voltage (A.C. only) marked
on the appliance.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage is
suspected, return the appliance to the nearest
Sunbeam Appointed Service Centre
for examination, repair or adjustment.
• For additional protection, Sunbeam
recommend the use of a residual current
device (RCD) with a tripping current not
exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water
or any other liquid unless recommended.
• Appliances are not intended to be operated
by means of an external timer or separate
remote control system.
• This appliance is intended to be used in
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
• Children should be supervised to ensure that
they do not play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while
in use.
If you have any concerns regarding the performance and use of your appliance,
Ensure the above safety precautions are understood.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions For
Your Tower Fan
• Do not use outdoors.
• The fan must not be used if the guards are
damaged in any way.
• Do not run the cord of the fan under
carpeting. Do not cover the cord with throw
rugs, runners or other floor coverings.
Arrange the cord away from traffic areas so
that it will not be tripped over.
• Do not insert or allow foreign objects to
enter any ventilation or exhaust openings
as this may cause electric shock or fire, or
damage to the fan.
• Do not use this fan in the immediate
surrounds of a bath, shower, laundry area
or swimming pool.
• Be sure the fan is placed on a dry, even
surface. Do not use on soft surfaces, such
as beds, where opening may become
blocked.
• Never insert fingers, pencils or any other
objects through the guards whenever the
power plug is connected, especially while
running.
• Avoid touching mobile parts of the fan.
• Do not attempt to move your fan whilst it is
operating. If your fan needs to be moved,
please ensure that it is turned off and you
use the carry handle on top of the tower.
• Keep your fan away from heat sources,
corrosive gases and avoid direct sunlight.
• This fan is only to be used with the base
• When scrapping the fan at the end of its
fitted and in good condition.
useful life, follow local regulations.
• Disconnect the power plug before
dismantling, assembling or before cleaning.
• Always unplug the fan when not in use for
any long length of time.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating Your Tower Fan
1.Always locate your fan on a level surface.
2.Your tower fan should be located in a dry,
cool, well ventilated location. Keep your
fan away from heat sources, corrosive gases
and avoid direct sunlight.
3.Do not attempt to move your tower fan
whilst it is operating. If your fan needs to
be moved, please ensure that it is turned
off and you use the carry handle on top of
the fan.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Of Your Sunbeam
Tower Fan
Carry handle
Convenient carry handle allows you to easily
carry your fan from room to room.
Control Panel
Simply press the on/off button to turn the
unit on. Use the other buttons to select wind
mode, timer, speed and oscillation functions.
Indication Panel
The indication panel allows you to quickly
see which functions have been selected on
your tower fan.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling Your Tower Fan
1.Locate the two halves of the base.
6.Feed the power cord through the two
guides on the bottom of the base; the cord
will then come out through the outer rim.
7.Insert the 4 silicon feet provided into the
holes under the base.
8.Stand the fan upright, it is now ready for
use. See Figure 3.
2.Remove the two butterfly screws from
underneath the tower section of the fan
and set aside.
3.Feed the power cord between the two
halves of the base. See Figure 1.
Figure 3
Figure 1
4.Clip the two halves of the base together,
ensuring the cord remains within the
channel formed when the two halves come
together.
5.Place the two butterfly screws back into
the holes they were removed from and
firmly fasten. See Figure 2.
Figure 2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote control
Oscillation
Operates within 8 metres of the
Tower Fan.
Your tower fan oscillates 70°,
distributing cool air throughout
the room.
Fan speed button
Choose from 3 speed settings,
low medium or high.
Preset/Timer
The preset timer allows you to
set your tower fan to turn on/off
after 1,2,4 or 8 hours.
Wind Mode
You have a choice of 2 Nature or
Sleep airflow types.
When used in nature mode, the
fan speed is randomly adjusted,
giving the feeling of a natural
breeze.
When set to Sleep Mode the
fan speed decreases after 30
minutes from high to medium,
then medium to low. When used
with the timer, will ultimately
switch the unit off.
Using the remote control
Inserting or changing the batteries
1. Point the remote towards the control panel
on the front of the tower to operate.
1. Slide the rear cover off the remote control
unit.
2. Insert the 2 AAA batteries provided with your
tower fan.
3. Replace the rear cover.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Tower Fan
Switching the fan on
Selecting a fan speed setting
1. Place the fan on a level surface.
2. Insert the plug into a 230/240V power outlet
and turn the power on.
Your Sunbeam tower fan has 3 speed settings
as follows:
• low speed
• medium speed
• high speed
“
“
“
” light illuminates
” light illuminates
” light illuminates
3. Press the power button on/off.
4. Press the fan speed button to select
low, medium or high depending on your
preference.
To select a fan speed, simply press the fan
speed button on the tower or the remote. Each
press of the button will increase the fan speed
and then return back to the lowest speed
again.
Switching the fan off
• To switch the fan off, simply press the power
button on/off .
• If you will not be using the fan for a length of
time, it is advisable to turn the power off at
the wall socket and unplug the power cord.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Tower Fan (continued)
Using the oscillation function
Using the preset timer
The 70 degree oscillation function can be used
on any setting.
To set the Timer to turn off
1. Press the on/off button.
1. Turn the unit on and select any fan speed.
2. Press the Preset/Timer button, which
automatically starts at 1hour (1H).
To change the time, press the Preset/Timer
button until the desired time is 1, 2, 4 or 8H.
2. Press the ‘OSC’ button on the tower or the
remote. The fan will begin to oscillate from
side to side.
To stop the fan from oscillating, simply press
the ‘OSC’ button once again.
3. To Turn off the timer, continue pressing the
Preset/Timer button until there is no light
illuminated.
Note: Alternatively, you can press the on/off
switch to turn off the fan and turn back on
again. This also disengages the timer function.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Tower Fan (continued)
To set the Timer to turn on
1. With the fan off, but on at the power outlet
(Standby mode) continuously press the
Preset/Timer button first to select the desired
time.
2. You can also select the wind speed, wind
mode and oscillation options once the preset
time has been selected.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your Tower Fan (continued)
WIND MODES
Nature mode
Sleep mode
Nature mode provides an extra level of comfort
by simulating the natural rise and fall of the
wind over time. You can use this mode on any
fan speed setting.
To use Nature mode:
1. Choose a fan speed.
Sleep mode is identical to Nature mode with
the added advantage that the highest fan
speed gradually decreases over time. This
allows you to turn the fan on a high speed
setting last thing at night, knowing that by the
time you are asleep, the fan has switched itself
down to a slower speed.
2. Press the button on either the tower or the
remote until the light illuminates.
To use Sleep mode:
1. Choose a fan speed.
The fan will now vary its speed every few
seconds between the chosen fan speed, each
lower fan speed, and off. For example, if you
set the fan speed to 2 (medium), the actual
fan speed will alternate between 2, 1 and off.
To cancel Nature mode, press the Wind mode
button on either the tower or the remote until
the light is no longer illuminated.
2. Press the Wind mode button on either the
tower or the remote until Sleep mode is
illuminated.
The fan will now operate in the same manner
as with Nature mode, except that after 30
minutes, the maximum speed will decrease.
Eventually in this mode, the fan switches down
to 1 (low) speed, which alternates between 1
and off.
To cancel Sleep mode, Press the Wind mode
button on either the tower or the remote until
the light is no longer illuminated.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
If your tower fan fails to operate check the
following:
If your remote control fails to operate check
the following:
• Make sure the electrical outlet or circuit
• Ensure that you point the remote towards
breaker is working.
the front of the fan.
• Check for obstructions around the air intake
• Check that the batteries are not worn.
grill.
Replace if necessary.
Care and Cleaning
Ensure that your fan is switched off and
disconnected from the power outlet before
cleaning.
• Carefully wipe your fan using a clean cloth.
Do not use abrasive cleaners or brushes to
clean the appliance as these may scratch
the surface.
• Take care that excessive dust does not build
up in the air-intake and air-outlet grill, and
clean it occasionally using a dry brush or
vacuum cleaner.
• Store the fan in a cool dry place when not in
use, in its original carton if possible.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Year Replacement Guarantee
In the unlikely event that this appliance develops any malfunction
within 2 years of purchase (3 months commercial use) due to
faulty materials or manufacture, we will replace it for you
free of charge.
Should you experience any difficulties with
your appliance, please phone our customer
service line for advice on 1300 881 861 in
Australia, or 0800 786 232 in New Zealand.
Alternatively, you can send a written claim
to Sunbeam at the address listed below.
On receipt of your claim, Sunbeam will
seek to resolve your difficulties or, if the
appliance is defective, advise you on how
to obtain a replacement or refund.
In Australia you are entitled to a
replacement or refund for a major failure and
for compensation for any other reasonably
foreseeable loss or damage. You are also
entitled to have the goods repaired or
replaced if the goods fail to be of acceptable
quality and the failure does not amount to
a major failure.
Should your appliance require repair or
service after the guarantee period, contact
your nearest Sunbeam service centre.
Your Sunbeam 2 Year Replacement
Guarantee naturally does not cover misuse
or negligent handling and normal wear and
tear.
For a complete list of Sunbeam’s authorised
service centres visit our website or call:
Australia
Similarly your 2 Year Replacement Guarantee
does not cover freight or any other costs
incurred in making a claim. Please retain
your receipt as proof of purchase.
1300 881 861
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
The benefits given to you by this guarantee
are in addition to your other rights and
remedies under any laws which relate to the
appliance.
New Zealand
0800 786 232
26 Vestey Drive, Mt Wellington
Auckland, New Zealand
Our goods come with guarantees that cannot
be excluded under the Australian Consumer
Law and under the New Zealand Consumer
Guarantees Act.
Download from Www.Somanuals.com. All Manuals Search And Download.
Need help with your appliance?
Contact our customer service team or visit
our website for information and tips on
getting the most from your appliance.
In Australia
Or call 1300 881 861
In New Zealand
Or call 0800 786 232
is a registered trademark.
Made in China.
Due to minor changes in design or otherwise,
the product may differ from the one shown in this leaflet.
© Copyright. Sunbeam Corporation Limited 2008.
ABN 45 000 006 771
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Unit 3, Building D
26 Vestey Drive
Mt Wellington Auckland
New Zealand
Sunbeam Corporation is a division of GUD Holdings Ltd.
6/11
Download from Www.Somanuals.com. All Manuals Search And Download.
|