Users Guide & Installation
Handbook
Stoves
SEH600iTCX
Part No 082753602 Date 19/03/2013
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
BefoRe UsInG tHe pRoDUct
appliance. Cleaning and
Make sure that you have removed all
packaging and wrapping. Some of the
items inside this appliance may have
additional wrapping.
user maintenance shall
not be made by children
without supervision.
GeneRal
WaRnInG! -
WaRnInG! - The
Unattended cooking on
a hob with fat or oil can
be dangerous and may
result in fire.
appliance and its
accessible parts become
hot during use. Care
should be taken to
NEVEr try to extinguish
a fire with water, but
switch off the appliance
and then cover the flame
with a lid or damp cloth.
WaRnInG! - Danger of
fire: Do not store items
on the cooking surfaces.
Never leave any cook
zone on without a pan
covering it. This causes a
fire hazard.
WaRnInG! - Servicing
should be carried out
only by authorised
personnel.
avoid touching heating
elements. Children less
than 8 years of age shall
be kept away unless
continously supervised.
This appliance can
be used by children
aged from 8 years and
above and persons with
reduced physical sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision
or instruction concerning
the use of the appliance
in a safe way and
WaRnInG! - The
appliance must never be
disconnected from the
understand the hazards
involved. Children
shall not play with the
mains supply
5.160
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
during use, as this will
seriously affect the
safety and performance,
particularly in relation
to surface temperatures
becoming hot and gas
operated parts not
correctly fitted.
WaRnInG! - There is
a risk of electric shock,
so always make sure
you have turned off
and unplugged your
appliance before
working efficiently. The
cooling fan (if fitted) is
designed to run on after
the control knob has
been switched off.
starting. Always allow
the product to cool down
before you change a
bulb.
WaRnInG! - Do not
modify the outer panels
of this appliance in any
way.
WaRnInG! - This
appliance must be
earthed.
WaRnInG! - The top
element gets extremely
hot when in use, so take
care to avoid touching it.
WaRnInG! -
Do not spray aerosols
in the vicinity of this
appliance while it is in
operation.
WaRnInG! - Do not
store or use flammable
liquids or items in the
vicinity of this appliance.
WaRnInG! -
Do not modify this
appliance.
electRIc InDUctIon HoB
WaRnInG:-
WaRnInG! - Do not
Unattended cooking on
a hob can be dangerous
and may result in fire.
5.160
operate the appliance
without the glass panel
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
NEVEr try to extinguish
do not rely upon the
automatic pan detection
system as your means
of switching “off” the
a fire with water, but
switch off the appliance
and then cover flame
e.g. with a lid or a damp appliance.
cloth.
This induction hob
complies with the
Danger of fire: do not
store items on the
cooking surface.
applicable EMC and EMF
standards. Therefore it
should not interfere with
other electronic units.
Persons fitted with a
pacemaker or any other
electrical implant should
clarify with their doctor
or the producer of the
implant, whether there
implant is adequate and
fail-safe.
If the surface is cracked,
broken or shattered,
switch off the appliance
to avoid the possibility of
electric shock and call for
a service engineer’s visit.
Metallic objects such as
knives, forks, spoons and
lids should not be placed
on the hob surface since
they can get hot.
the pacemaker
must be designed
in compliance with
the appropriate
Ensure you switch off
the appropriate cook
zone individually or (by
the central on/off key if
touch control) when you
have finished cooking,
regulations.
caution: This appliance
is for cooking purposes
5.160
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
only. It must not be used If you use a griddle plate
for other purposes, for
example room heating.
ensure it is completely
cool before attempting
to lift it from the hob as
residual heat may cause
burns, Always use oven
gloves to protect your
hands.
The appliance has a
glass hob top, make
sure you do not drag
pans across the ceramic
surface as this will
lead to scratches and
damage.
Do not use the hob
surface as a chopping
board or food
preparation area as this
may lead to it becoming
damaged.
Induction Hob
Parts of the appliance
may become hot while
in use. Always make
sure that children
are supervised when
they are near to the
appliance.
Always position pans
over the centre of the
cook zone, and turn
the handles to a safe
position so they cannot
be accidentally knocked
or grabbed.
Do not leave pans on
the hob when you’re not
around - take them off
the cook zone if you
have to leave the kitchen
even if you think it will
only be for a moment,
while you answer the
door or phone.
The glass ceramic can
get hot whilst cooking;
even though the cook
zone itself does not
generate heat. The heat
generated is conducted
back from the hot pans.
5.160
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
oil can be dangerous and may result in a
Keep electrical leads
from trailing over or
going near the hob.
fire. NEVER try to extinguish a fire with
water, but switch off the appliance and
then cover flame e.g. with a lid or a fire
blanket.
WARNING - If a pan catches fire:
The appliance must
never be disconnected
from the mains supply
during use as this will
seriously affect the
safety and performance,
particularly in relation
to surface temperatures
becoming hot and
component parts not
working efficiently. The
cooling fan (if fitted) is
designed to run on after
the control has been
switched off.
•
Do not move it - it is likely to be
extremely hot
•
Turn off the heat if it’s safe to do so
- but never lean over a pan to reach
the controls.
•
•
If you have a fire blanket, put it over
the pan.
If you have put the fire out, leave the
pan to cool completely.
Deep-fat frying presents more
dangers in your kitchen.
•
Never fill a chip pan (or other deep-
fat fryer) more than one-third full of
oil
•
Do not use a fire extinguisher
on a pan of oil - the force of the
extinguisher can spread the fire and
create a fireball.
If you have an electrical fire in the
kitchen:
•
•
•
Pull the plug out, or switch off the
power at the fuse box - this may be
enough to stop the fire immediately
Smother the fire with a fire blanket,
or use a dry powder or carbon dioxide
extinguisher
fire safety advice
Most kitchen fires occur when people are
distracted or leave things unattended, so
remember:
Never use water on an electrical or
cooking oil fire.
If you’re called away from the cooker - by
the phone or someone at the door, either
take pans off the heat, or switch off your
hob.
DIsposal
packaging Material
The packaging materials used with this
appliance can be recycled.
Don’t let yourself be distracted while
cooking.
Please dispose of the packaging materials
in the appropriate container at your local
waste disposal facilities.
If you do have a fire in the kitchen, don’t
take any risks - get everyone out of your
home and call the Fire Brigade.
Unattended cooking on a hob with fat or
5.160
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
old appliances
The Symbol
on the product or on
its packaging indicates that this product
may not be treated as household waste.
Instead it should be taken to the appli-
cable collection point for the recycling of
electrical and electronic equipment.
You will by ensuring the appliance is cor-
rectly disposed of help prevent potential
negative consequences for the environ-
ment and human health.
For additional details regarding the recy-
cling of this product please contact your
local government office, your household
waste disposal service or the retailer
where you purchased the product.
5.160
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB - InDUctIon
touch controls
Feature
Symbol
Description
Induction power is the most efficient means
of cooking food on a hob, providing fast heat
up and boiling times
Eco Power
Slide your finger down the stylish & accurate
Power Slider or simply touch the control at
the exact power level you require
Power Slide Control
Digital Display
Secret till “lit” display
No. of Power
levels
11
Precise & repeatable control settings
The central on/off switch enables all of the
cooking zones to be switched off simultane-
ously
Central on/off
Switch
Keep Warm/low
Temperature
Holds the pan temp at approx 65 oC - ideal
for melting chocolate
With this button you can pause all cooking
settings with one touch (cuts power)
Pause
Easily recall your hob settings with this func-
tion
recall
Automatically heats up & then turns down
power to a lower setting
Auto Heat Up
Temporarily boost the power to a cook zone
by a massive 60%
Power Boost
Minute Minder
Yes
Yes
Need to time an egg - use this function
Timer Auto Switch
Off (4 zones)
All four cook zones can be simultaneously
timed to turn off automatically
Allows the lH cook zones to be linked
creating one large oval cook zone - ideal for
griddle plates & large pans
Griddle Zone
Indicates if the correct pans are being used
and helps save energy
Pan Detection
The hob is equipped with additional safety
systems which help to prevent cookware from
overheating
overheat Pan
Detection
Yes
Child lock
Prevents unintentional operation of the hob
This feature not only warns of hot surfaces
but also indicates residual heat which can be
used as a temporary warm zone
residual Heat
Indicators
rest assured this hob will eventually turn
itself off if left on
Holiday Shutdown
Yes
Yes
Flush Fitting or
Surface Mount
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
touch controls
selecting and activating a cook zone.
1) Select the required cook zone.
2) Select the required power setting (0-9).
notes:-
The touch controls for your induction have
been designed to provide you with finger
tip control of your hob, providing accurate
and repeatable power settings for cooking
and an easy clean surface that can be
easily wiped over.
Setting U (between setting 0 and 1) pro-
vides a gentle low temp power setting.
(See the special features section for fur-
ther details).
When a cook zone is activated the power
setting is displayed for each zone individu-
ally.
Modifying the power setting whilst
cooking
Using the touch controls
The cook zone and timer displays function
as the touch controls, To select a cook
zone or the timer, simply touch the display
area, use the flat of your finger, not the
tip, The controls respond to touch, so you
don’t need to apply any pressure.
1) Select the required cook zone.
2) Adjust the power setting
turning off individual cooking zones.
1) Select the required cook zone that you
want to turn off.
once you have selected the cook zone or
the timer, you have 10 seconds to set it
(while the red lED at the bottom right of
the display is on). If the red LED goes out
before you have made and adjustment,
simply re-select the cook zone or timer by
touching the display again.
2) Decrease the power setting until the
display shows 0. If the cook zone surface
is hot to touch, H will replace 0 in the
display.
Always ensure the control area is clean,
dry and free from of any objects (e.g.
utensils, tea towels and cloths), spillages
and water may make the controls difficult
to operate.
Basic Hob function
Turning on the hob.
1) turn on the hob,
Using the on/off button.
note:-
a) “CL” (cleared) in the timer display
means the timer is not set.
b) If you do not select a cooking zone
within 20 seconds, the hob will automati-
cally switch off.
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
specIal HoB fUnctIons
pause key
central on/off switch
Warning!
Don’t leave pans on the hob when you’re
not around - take them off the heat if you
have to leave the kitchen (even if you
think it will only be for a moment, while
you answer the door or phone) or you can
use the Pause Key.
The Pause key is ideal for unexpected
interruptions when cooking. With this
button you can pause all cooking settings
(Cuts power) with one touch.
The central on/off switch enables all of
the cooking zones to be switched off
simultaneously at a touch of a button, so
when you have finished cooking or are
called away from the kitchen for any rea-
son you can rest assured that everything
is under control and safe.
to operate
1) Select the on/off key. The key needs to
be pressed for at least 1 second to acti-
vate, this is to ensure that the hob cannot
be activated unintentionally.
to operate
1) Press the pause key.
note:-
note:
All cook zones functions will pause (no
power) and will be displayed for each
cook zone.
All other keys only need to be pressed for
0.3 seconds to be activated/deactivated.
2) To restart press the pause button and
note:
touch anywhere along the slider control.
“H” will appear on any cook zone display
that is still hot to touch. (see Hob Hot
Lights for description of feature).
Note:- All cook zones will automatically
resume to the previous settings.
Recall
low temperature setting
oops! Have you switched off your hob
accidentally. Easily recall you hob settings
with this function
(Keep Warm)
This handy little function provides a really
low, steady heat, which is lower than
a simmer. Its perfect for keeping food
warm, defrosting foods or even just melt-
ing chocolate without the need for a Bain
Marie. Holds the temperature of the pan
to approx 65oC.
to operate:
If the pause led is active when you
switch back on, select the pause but-
ton and touch anywhere along the slider
control.
note:- all cook zones will automatically
resume to the previous settings
to operate
1) Turn on the hob.
2) Select the required cook zone.
3) Select power setting “U” in between
power setting “0” and “1”.
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
auto Heat Up
end of auto Heat period
Helps to take the worry out of pans
boiling over and burning food! No need
to stand over the pan, allows you to do
other tasks whilst maintaining control over
the pan.
Initially, while the cook zone is at the
highest setting, “A” will flash alternately
with your selected lower setting. Then,
when the period of highest setting is over,
“A” will stop flashing and the cook zone
will automatically reduce the heat to your
preset lower setting.
The Auto Heat Up delivers power full
power (9) to the zone for a fixed period
of time before automatically turning back
down to the desired setting.
The Auto Heat Up has been tuned to
provide the best heat up period for each
setting.
auto
Heat up
(mins)
power
setting
suggested food
type
low
Temp “u”
Melting chocolate
N/A
1
1
2.5
4
Milk, Soup, Stews,
2
Vegetables
3
4
5
rice, Potatoes, Pasta
5
7
6
2
Frying, Fish Fingers,
Pancakes, Steaks
7
8
3
4
9
N/A
N/A
N/A
N/A
Boost
Average Auto Heat up time is 3 minutes
to operate:
1) Select a cooking zone.
2) Select heat setting 9.
3) Remove finger and retouch setting 9
position,“A” and setting “9” will flash alter-
nately in the cook zone display.
4) Adjust the power setting to the desired
(lower) setting that you want the cook
zone to automatically adjust to (1-8).
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
power Boost
Minute Minder
rev up your hob with this feature, tempo-
rarily boost the power to a cook zone by a
massive 60%
The minute minder buzzes when the time
set has expired. Does not switch off any
zone.
The power boost is a function that can
be used to temporally boost the normal
maximum power for a cook zone by bor-
rowing the available power from a “paired
zone”.
to operate:
1) Turn on the hob, using the on/off key.
2) Select the timer “cl” (do not activate
any cook zone).
All the cook zones have this function apart
from the “Griddle Zone ” function.
3) Set the right hand digit up to 9 minutes
(Single Minutes Units) and wait a couple
of seconds.
The hob is split into “two paired areas”.
LH Area (LHF and LHR Cook Zone) and
RH Area (RHF and RHR Cook Zone). Only
one cook zone per area can be boosted at
anyone time.
4) The display will now indicate for you to
set the left hand digit, up to 90 minutes
(10 Minute Units).
5) The timer is now set and begins count-
ing down. (No zone indicator light should
be set).
Maximum
cook
Zone
normal
Max power
Boosted
power kW
permisable
setting on
paired Zone
6) You can now use the hob as normal.
lHF
lHr
rHF
rHr
1.85
1.85
1.40
2.30
3.00
3.00
2.20
3.70
9 (LHR)
8 (LHF)
8 (RHR)
6 (RHF)
When the time is up.
1) The corresponding indicator in the tim-
er display will flash, the timer will beep.
2) Touch any control to stop the beeping.
note: The Power Boost function will only
operate for a limited time and is also
under thermal control this means the
power boost will deactivate automatically
if the product is hot this is to protect the
internal electronic components of the hob
or to prevent the cookware from over-
heating.
to operate:
1) Select the required cook zone.
2) Select the Power boost key
(Letter “P” appears in cook zone display).
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
timer auto switch off
When the time is up
1) The corresponding indicator in the
timer display will flash, the timer will
beep, and the cook zone will automatically
turn off, (The cook zone will display H if
the surface is hot).
The timer can be set to automatically turn
off a cooking zone.
All four cook zones can be simultaneously
timed to turn off automatically.
Cook zones can be set for a maximum
time of 99 minutes.
2) Touch any control to stop the beeping.
additional timer information
Warning!
To modify or cancel a timer setting follow
Never leave the hob unattended when in
use, even when you have set the timer to
turn off the cook zone.
steps 1) to 5) above.
To set the timer for additional zones fol-
low steps 1) to 5) above.
to operate.
If multiple zones have been set for timed
operation , the timer display will always
display the time for the cook zone with
the shortest time remaining.
1) Select the cook zone to be timed,
ensure power level is already set before
selecting timer.
To check the timer setting for a different
cook zone, simply select the required cook
zone, the remaining time will briefly ap-
pear in the timer display.
2) Select the timer, the flashing indicator
on the timer display means the timer is
ready to be set for that particular zone.
3) Set the right hand digit up to 9 minutes
(Single Minutes Units) and wait a couple
of seconds.
4) The display will now indicate for you to
set the left hand digit, up to 90 minutes
(10 Minute Units), and wait a couple of
seconds. Skip this step if you want set
the timer for less than 10 mins, leave the
timer for a few seconds at it will automati-
cally set and start counting down.
5) The timer indicator in the timer display
stops flashing and remain lit, the timer is
now set and begins counting down.
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
Griddle Zone with Bridge function
G riddle Z one
Flexibility is what counts.
The lH zones can be used as two sepa-
rate round cooking zones which can be
controlled individually or they can be
bridged to provide a large oval zone that
can be controlled via one setting.
large pans and griddle plates can be
placed across the two zones.
to operate:
1)Simultaneously select the LHF & LHR
cook zones (“n” will appear in the lHr
cook zone display).
2)The power setting is controlled via LHF
cook zone (0-9).
3)To cancel the bridge function, simulta-
neously select the lHF & lHr cook zones
(“n” will disappear from the lHr cook
zone display). The LHF & LHR zones can
now be operated independently.
Keep Warm
The Keep Warm setting is found between
power setting 0 and 1 indicated by the
symbol :-
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
pans and cookware for induction
pans unsuitable for Induction:
hobs.
Pans made of copper, stainless steel, alu-
minium, oven proof glass, wood, ceramic
and terracotta.
Pans and Cookware for induction cooking
zones must be made of ferrous mate-
rial such as cast iron and have magnetic
properties. The base must also be of the
correct diameter.
overheat pan protection
The hob is equipped with additional safety
systems that help to prevent cookware
from overheating, providing an additional
level of safety not available on conven-
tional hobs such as gas and ceramic hobs.
It’s important that good quality flat bot-
tomed pans are used.
If a pan creates a large air gap over the
middle of the cooking zone, the accuracy
of the temperature sensing can be af-
fected.
Helps reduce the risk of fire through mis-
use use of hob.
If there is an overheat situation the hob
will display the appropriate code detailed
in the “hob status codes table”.
Always ensure that pan bases are dry
before using them on the hob.
Get a magnet, if a magnet doesn’t stick to
your pan, it is not suitable for use on the
induction hob.
approx surface
Intelligent hob
Glass temperature
safety system
(oc)
Beware:- Not all induction pans are of
the same quality due to their construc-
tion. Pans that use enamelled/laminated/
encapsulated bases can be difficult to de-
tect, especially small pans (e.g milk pans)
reduces Power
200
250
Boost setting to
level 9
reduces power to
60% of power level
setting
This problem is not with induction hob but
with the pan type, they can have bases
which are magnetic but are not thick
enough! If you experience problems
with small pans we recommend that you
to try a larger pan or a pan of a different
construction. Solid cast iron pans give the
best performance.
Switches cook zone
off
270
285
Switches whole ap-
pliance off
note:-
The safety temperature control of the
pans is only possible with quality flat bot-
tomed pans suitable for induction cook-
ing; Poor quality pans can create air gaps
between the glass and the pan, which
affects the accuracy of the temperature
control.
smallest Recco-
Induction cook
mended Diameter
Zone
(mm)
lHF
lHr
rHr
rHF
150
150
150
120
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
child lock “l”
to de-activate the child lock:
This feature is to help prevent accidental
switching on of the hob, especially by
young children.
1) Select the On/Off Key. (L will be dis-
played on all Cook Zones).
2) Simultaneously touch the RHF cook
zone and the Power Boost keys, the hob
should beep.
to activate:
1) Select the On/Off Key.
3) Remove fingers and touch the Power
boost key again. (The hob should switch
off).
2) Simultaneously touch the RHF cook
zone and the Power Boost keys, the hob
should beep.
4) When you now switch on the hob “0”
will be displayed in all cook zone displays,
the hob can now be used normally.
3) Remove fingers and touch the RHF
cook zone again. (l should appear in all
the cook zone displays).
Residual Heat Indicators “H”
4) Switch off the hob.
If when the cook zone is switched off the
glass surface is above 60oC, “H” will be
displayed in the cook zone display until
the glass surface drops below approx
55oC.
When you now switch on the hob “l” will
appear in all the cook zone displays. The
child lock feature will be permanently acti-
vated, to de-activate follow the procedure
below.
This feature not only warns you against
hot surfaces but also indicates that there
is residual heat which can be used as
temporary warm zone.
to operate the hob with child lock
activated:
1) Select the On/Off Key. (L will be dis-
played on all Cook Zones).
note:
2) Simultaneously touch the RHF cook
zone and the power boost button, (l will
disappear from all cook zones).
The cook zone itself does not heat up, but
the ceramic glass does get hot because
of the hot pan conducting heat back onto
the hob glass.
3) The hob can now be used normally.
auto stand by
The Hob will automatically switch off if
left (with pan) on for an extended period
of time.
Max operating
power Rating
time (h)
1-2
6
3-4
5
4
5
6-9
1.5
Power Boost
10 mins
Download from Www.Somanuals.com. All Manuals Search And Download.
UsInG tHe HoB
tRoUBlesHootInG
the fan keeps working for a few
minutes after the hob has been
turned off.
The hob produces a smell the first
few times it is used.
This cools down the electronics.
Heat a pan full of water on each zone for
half an hour.
the hob won’t work. the indicators
don’t come on
pans make a noise during cooking
The electricity supply is not reaching the
appliance (faulty supply or connection);
Check the fuses and the cut-out switch.
refer to Troubleshooting chart and if
problems persist call, the customer ser-
vice hot line for further assistance.
This is caused by vibration due to the pas-
sage of energy from the hob to the pan.
on a high setting this is quite normal for
certain types of saucepan. It will not dam-
age the hob.
the hob makes a slight clicking
sound
This is caused by the distribution of power
between two heating zones on the same
side of the hob.
Hob status
Hob status Description
codes
action
l
Cannot operate hob (L) displayed by control
Child lock has been activated, deactivatie child lock
Allow appliance to cool, power boost will be avail-
No Power Boost
able when the appliance is cool.
eR21
U400
e2
Hob cuts off after programme setting
Appliance not working (Cable connection fault)
Induction coil overheating (hot pan)
Fan blocked to appliance
The appliances has overheated allow to cool.
Check mains cable connection & terminal at the
terminal block are wired correctly
remove pans and allow to cool
Check installation allows for free air flow, clean fan
inlets at the rear/underside of the appliance.
e8
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING
electRIc HoB
•
You can restore the hotplates by us-
ing a solid plate cleaner but take care
to avoid the red spots on elements.
ceramic glass hobs
•
The ceramic hob top can be cleaned
using a clean, damp cloth or kitchen
paper. Do not use a used dishcloth
or sponge as they can leave a film of
detergent on the surface which can
lead to discoloration. Please ensure
that the elements are cooled fully to
avoid steam burns.
•
To prime: Switch on each element in
turn for a short while (with no pan on
it) at a medium - high setting. This
will harden and burn off the coating.
•
To season: Heat the element for 30
seconds at a medium setting then
switch off. Use a minimum amount
of unsalted vegetable oil, on a dry
cloth or paper towel, and apply a thin
coat of oil to the element surface.
Wipe off the excess and heat the ele-
ment for one minute.
•
You can use a specialist ceramic
cleaner to restore the surface, but
use sparingly to avoid coating the
hob top too thickly. Too much cream
cleaner will lead to discolouration.
Use a dry, clean cloth to polish the
surface.
•
•
•
For stubborn marks, a specialist hob
scraper can be used.
Do not use steam cleaners or high-
pressure cleaning equipment.
regular cleaning will prevent any
salts or minerals from accumulating
on your hob and discolouring the
glass.
•
•
Wipe any spillage as soon as pos-
sible.
Clean the hob top as regularly as
possible, this will prevent any build
up of grease which may be a fire
hazard.
solid plate hobs
•
Prime and Season - this helps main-
tain the finish of the elements.
•
Use a damp, clean cloth to wipe the
solid plate, making sure that you
follow the circular grooves and avoid
damaging the red spots. Make sure
that you allow the hotplate to dry
before use by switching on the ele-
ments at a low heat.
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
General information
Installing the hob over a unit with a
drawer or door
Installation should only be carried out by
a qualified installer or engineer.
Air outlet is underneath work surface.
Please keep to the following points most-
carefully;
If necessary, remove the front crosspiece
of the unit.
Although every care has been taken to
ensure this appliance has no burrs, or
sharp edges, we recommend that you
wear protective gloves when install-
ing and moving this appliance. This will
prevent
Suitable protection to prevent obstruction
of the air inlet to the fans must be
provided.
We recommend that you install this appli-
ance in a work top which is a
minimum 38mm deep.
injury.
The hob should not be fitted above a
washing machine, a fridge or a freezer.
The hob can be fitted into a work top
less than 38mm deep, but the 20mm gap
between hob base and appliance must be
maintained.
Wall surfaces above the work surface and
in the immediate vicinity of the cooking
hob must be heat resistant.
laminated surfaces and the adhesive
used for fixing them must be heat resis-
tant in order to avoid any damage.
The space for air circulation, located
underneath and at the back of the hob
improves its reliability by ensuring that it
will cool down, efficiently.
Installations should be carried out in line
with the National regulations applicable
with this product type.
choosing your installation
Make sure that the air inlets through the
ventilator grids underneath the hob are
never blocked.
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
Installation above an oven
refer to the manufacturer’s instructions
for clearances above the oven.
We recommend a 9mm gap between the
bottom of the hob and appliance, should
the work surface be less than 38mm
deep.
In the case of a pyrolytic oven
If installing the hob above a pyrolytic
oven, additional provision for air
circulation / ventilation may be required.
Due to the excessive temperatures at-
tained during pyrolysis, using the hob at
the same time may cause the thermal
safety device within the hob to operate.
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
clearances and dimensions – re-
quirements
1. No shelf or overhang of combustible
material should be closer than 650mm
above the hob.
2. There must be a minimum clearance
of 50mm between the edges of the hob
and any side walls; this clearance must
be maintained up to 420mm above the
worktop.
3. There must be a minimum clearance of
50mm between the rear edge of the hob
and the rear wall. This clearance must
be maintained up to 650mm above the
worktop.
4. When installing an extractor hood
above the hob, refer to their Manufac-
turer’s instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
Fitting into worktop
Cut a hole in the work surface to the
required size. See table for relevant
dimensions.
A clearance of at least 50mm should be
maintained between the cutout and any
rear or side wall.
The worktop must be of heat-resistant
material or covered with heat-resistant
material.
Recessed Method (selected models)
recess the work top to the appropriate
depth (Approx 5mm) and shape to fit the
hob (add 1mm to overall glass size.
protecting the cut-out;
The types of chipboard used for work
surfaces swell relatively quickly in contact
with humidity.
Apply the self adhesive seal to the
underside of the hob glass. For best
results, the seal should be adhered along
each joint in turn, as close to the edge
as possible, and trimmed at each corner,
taking care to ensure a neat join. Insert
the hob into the recess, ensuring that the
foam seal is sitting correctly.
Apply a special varnish or adhesive to
the cut edge to protect it from steam or
condensation which may form under the
work surface under the hob.
This hob can be installed conventionally
(glass above the work top) or recessed into
the work top for a flush fit.
locate and attach the securing clamps to
the front and rear underside of the hob,
using the screws provided. Tighten the
screws so that the hob is pulled down
firmly against the worktop, thus ensuring
a good seal.
conventional Installation
Apply the self adhesive seal to the
underside edges of the hob glass. For best
results, the seal should be adhered along
each side in turn, as close to the edge as
possible, and trimmed at each corner, tak-
ing care to ensure a neat join.
You may want to fill any gap between the
hob top glass and the work top surface
with silicone sealant. DO NOT fit silicone
sealant under the glass hob instead of
foam seal.
Place the hob in the aperture, checking the
hob glass is covering the work top along all
four sides.
Set the front edge of the appliance parallel
with the front of the work top.
locate and attach the securing clamps
as required, Tighten the screws so that
the hob is pulled down firmly against the
worktop, thus ensuring a good seal.
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
fixing Brackets
Installation advice - cabinetry
Dealing with sides, cross-rails and
back-panels in cabinetry
Depending on the cabinets, the worktop
thickness and the hob positioning, it is
possible for the hob base and/or the
clamp brackets to interfere with parts of
the cabinet.
Cut away cabinetry and use appropriate
fixing brackets for your installation.
Important:
Clamps may be reversed to fit either
30mm or 40mm deep work top.
Download from Www.Somanuals.com. All Manuals Search And Download.
installation
connect to the electricity supply
(for fixed Wiring only)
Warning: This appliance must be
earthed.
The hob must be installed by a competent
electrician, using a suitable double pole
control unit, with 3mm minimum contact
separation at all poles.
We recommend that the appliance is
connected by a competent person who
is a member of a “Competent Person
Scheme” who will comply with the re-
quired local regulations.
Connection should be made with a
suitable cable. Important: Ensure that
you route all mains electrical cables well
away from any adjacent heat source,
such as an oven or grill.
Strip the wires & connect to the terminal
block as shown in the diagram & table
below.
Fit the cable clamp & secure with the
screw provided.
Close the terminal box, ensuring that the
cover is engaged on the locking tabs.
Download from Www.Somanuals.com. All Manuals Search And Download.
technical data
MaX total power Rating @ 220 - 240V ~ 50Hz = 7.4kW
Individual cook Zone power Ratings
cook Zone
normal power Rating / power Boost
kW
lHF
lHr
rHr
rHF
1.85/3,00
1.85/3.00
2.30/3.70
1.40/2.20
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER CARE
cUstoMeR caRe WeB sHop
range of Bake ware and Cookware essen-
tials including roasting Pans, Cake Tins
Having purchased a superior cooker, hob
or hood from us, you’ll naturally want to
keep it looking great. And who better to
help you care for it than the manufac-
turer?
and Non-Stick Cooking liners.
For all enquires, please visit our Web
call the Spares Sales Team on 0844
815 3745. For countries outside the UK,
please contact your local service agent.
We offer an extensive range of accesso-
ries, components and cleaning products
which, will instantly give your cooker a
good as new look.
In addition to the list of our most popular
products below, we also have an exciting
product De-
Where used
scription
purpose
Enables easier cleaning of your ceramic hob.
Prevents build up of mineral deposits. Best
used with Ceramic Hob Scraper Kit. 300ml
bottle.
All Ceramic glass
Ceramic Hob
hobs including
Cleaner
Induction
All Ceramic glass
Ceramic Hob
Ideal for removing cooked on marks from
ceramic glass hobs Best used with Ceramic
Hob Cleaner
hobs including
Scraper kit
Induction
Sealed Hotplate
Conditioner
All sealed/solid
plate hobs
Restores the sleek matt black finish to solid
hotplates
Multipurpose
Kitchen Cleaner
General kitchen
cleaner
Excellent multipurpose cleaner, For use
around the kitchen. 500ml bottle.
All cooking appli- Cuts through grease & burnt on grime. 500ml
ances. bottle
oven Cleaner
All cooking appli- Chemical free cleaning cloth Ideal for clean-
ances. ing & polishing glass & stainless steel
restor-A-Cloth
Stainless Steel
Cleaner
All stainless steel oil based cleaner. Perfect for removing stub-
parts
born & greasy marks. 300ml bottle.
New filters, help to maintain efficient cooker
hood operation and keep your Kitchen odour
free
rectangular car-
Cooker Hoods
Cooker Hoods
bon filters
New filters, help to maintain efficient cooker
hood operation and keep your Kitchen odour
free
round Carbon
Filters
15.030
Download from Www.Somanuals.com. All Manuals Search And Download.
CcUSsTtOoMEeR CcAaREe
To contact Stoves about your appliance, please call
Warranty Registration
0844 481 0182
to register your appliance
customer care Helpline
0844 815 3740
in case of difficulty within the UK
Alternatively general, spares and service information is available from our website at
Please ensure that you have the product’s model no and serial no available when you
call. These can be found on the silver data label on your product which is located:
ovens
open the door; adjacent to the oven cavity
Inside the base compartment
on the underside of the product
High-level grill products
Hobs
Enter appliance numbers here for future reference:
Model No
Serial No
seRVIce RecoRD
Date of purchase
Installed by
Installation Date
Place of purchase:
Date
Part(s) replaced
Engineer’s name
For customers outside the UK and Northern Ireland, please contact your local supplier.
Glen Dimplex Home Appliances, Stoney lane, Prescot, Merseyside, l35 2XW
Download from Www.Somanuals.com. All Manuals Search And Download.
|