4 Port DVI USB KVM Switch with Audio
and USB 2.0 Hub
SV431DVIUA
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 10/01/2012
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction ...........................................................................................1
Features ........................................................................................................................................................ 1
Before You Begin ....................................................................................................................................... 1
Package Contents ..................................................................................................................................... 1
Installation ..............................................................................................2
Console Connections............................................................................................................................... 2
Connecting Slave Computers............................................................................................................... 3
Operation ................................................................................................4
Rack Mount Kit (Optional) ....................................................................6
Troubleshooting.....................................................................................7
Specifications..........................................................................................8
Technical Support ..................................................................................9
Warranty Information............................................................................9
Instruction Manual
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing a StarTech.com 4 Port StarView DVI USB KVM Switch. This
product offers a cost-effective way to operate up to four computers or servers from a
single keyboard, monitor and mouse peripheral set, while saving valuable deskspace.
Featuring USB peripheral sharing, audio switching and astounding video resolutions of
up to 1920 x 1200 (@60/70Hz), this is the perfect combination of computer control and
multimedia quality.
Features
•
•
•
•
•
Convenient audio selection and video signal adjustment
Allows up to four computers to share up to 4 different USB peripherals
Front panel push buttons provide easy computer selection
Requires no drivers for keyboard or mouse operation
No software requirements
Before You Begin
System Requirements - Console Side
•
•
•
1 x DVI monitor
1 x USB keyboard
1 x USB Mouse
System Requirements - Computer Side
•
•
1 x DVI-I (Single Link) Cable
1 x USB A-B Cable
Package Contents
•
•
•
•
1 x Instruction Manual
1 x DVI USB KVM Switch
1 x Rubber Foot Pad Set
1 x Power Adapter
Instruction Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
PC BIOS Notice: The following BIOS setup changes are necessary for PC users but are not
required for Mac users:
1. In STANDARD CMOS, set HALT ON ERROR to ALL BUT KEYBOARD.
2. In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set the USB
IRQ to ENABLED.
Console Connections
Before installation, please ensure that all devices and computers to be connected to
the KVM Switch have been turned off.
1. Connect the monitor that will be used to the Console DVI port on the rear panel
of SV431DVIUA
2. Connect a USB keyboard and a USB mouse to any two of the Console USB ports as
shown below:
USB Device
USB Device
USB Keyboard
USB Mouse
Instruction Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Slave Computers
There are two options for connecting slave computers to SV431DVIUA:
1. a) Using a Male to Male DVI-D (Single Link) cable, connect the computer’s DVI port
to one of the four available PC ports (PC 1, PC 2, PC 3, PC 4) as shown below.
b) Using a USB A-B Cable, connect the USB port that corresponds with the PC port
used in step 1, to the USB port on the corresponding computer, as shown below.
2. Use a 4-in-1 USB, DVI, Audio and Microphone KVM Switch cable, such as
USBDVI4N1A15 to connect each computer to the desired port. For more
information, please see Accessory Products from StarTech.com.
Male to Male DVI
One USB patch cable
for both keyboard and
mouse
Repeat steps 1a and 1b or and 2 to connect the remaining computers to the available
ports. Devices and computers that are connected to SV431DVIUA can now be
turned on.
Instruction Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Please note: SV431DVIUA can be used with a VGA connection to controlled (slave)
computers, however an adapter must be used to make the connection (please see
Accessory Products from StarTech.com - DVIVGAMF).
Also note: Analog and digital connections cannot be used concurrently. To
successfully connect SV431DVIUA to the slave computers, all connections must be
either digital or analog.
1
2
1. Online/Selected LEDs
When the LED turns green, the computer connected to the corresponding port is
powered-on. When a computer is selected, its corresponding red LED illuminates.
2. Pushbuttons
Each computer has a button associated with it on the front panel for selection. For
example, to switch to computer 2, press the 2 button.
Auto Scan
Auto Scan automatically scans through computers one at a time, in a fixed interval.
Please note: keyboard and mouse are not operable during Auto Scan. To activate
Auto Scan, press down front panel push buttons 3 and 4 simultaneously. The port LED
flashes during Auto Scan. Auto Scan is effective for powered-on computers only. To exit
the Auto Scan mode, just tap any one of the front panel pushbuttons.
Scan Time
This selection sets the scan interval for the Auto Scan feature. The Scan Time options
are 3, 8, 15 and 30 seconds. Please note: Scan Time is automatically set to a default of 3
seconds, in the event that SV431DVIUA loses power. To change the Scan Time interval,
press both front panel buttons 1 and 2 simultaneously. SV431DVIUA will beep 1, 2, 3 or
4 times for scan time of 3, 8, 15 or 30 seconds respectively.
Instruction Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
“FUNC” Button
To adjust the optimal video signal strength corresponding to the length or quality of
DVI cable being used, use the FUNC button in combination with the other front
panel pushbuttons.
1. Press the FUNC button three times. The POWER LED will flash once per second.
2. To adjust equalization of the selected port input video strength, press button 1 once
or twice; SV431DVIUA will beep once (normal) or twice (enhanced) respectively.
To adjust the output current of a selected port, press button 3 once or twice ;
SV431DVIUA will beep once (normal) or twice (enhanced) respectively.
To adjust the output emphasis of the selected port, press button 4 once, twice,
three or four times; SV431DVIUA will beep once (no pre-emphasis), twice (low
preemphasis), three times (medium pre-emphasis), or four times (high pre-
emphasis), respectively.
3. Once you have entered the desired settings, press the FUNC button once to save
and exit function settings.
To select the audio signal from any port of 4 connected computers, press the FUNC
button in combination with the other pushbuttons.
1. Press and hold the FUNC button.
If all four green LEDs illuminate: The audio port and the selected COM port are the
same - this is referred to as “tracking mode”.
If just one green LED illuminates (indicating the selected audio port): The audio port
is different from the selected computer port - this is referred to as
“non-tracking mode”.
2. While still pressing the FUNC button:
Press the button that corresponds numerically with the desired audio port. e.g if
you wish to select the signal from port 3, press the 3 button while still holding the
“FUNC”button.
or
Press buttons 1 and 2 to enter tracking mode.
3. Once you have entered the desired settings, press the FUNC button once to save
and exit function settings
Instruction Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rack Mount Kit (Optional)
The figure below shows how to attach optional mounting brackets and cable support
(SV431RACK) to SV431DVIUA for use with a standard 19”rack cabinet:
To Rack Cabinet Back Post
To Rack Cabinet
Back Post
USB to monitor cables to
the switch
Two screws
secure the
cable support
USB or monitor
cables to a
computer
Instruction Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Causes
Solution
Press any front panel
button to select a
computer, then use the
keyboard and mouse.
In Auto Scan mode, the
keyboard and mouse
are not operable.
Keyboard or mouse does
not work
Re-install device driver.
The device should be
self-powered; add a
power adapter to the
device.
Improper device driver
Device consumes too
much power.
Newly installed USB device
does not work
Improper device
initialization
Be sure the USB cable
is well seated to ensure
communication
Wait at least 5
seconds before
computer switching
to ensure proper USB
communication.
Computer hangs while
switching computers
Device initialization
takes too much time
Turn off device
driver (not keyboard
nor mouse) before
switching.
All PCs are off or only
one PC is turned on.
Scan mode works for
power-on computers
only.
Auto Scan does not switch
PC automatically and
SV431DVIUA beeps
Turn computers on.
To adjust the optimal
video signal strength
corresponding to the
Poor video resolution
Improper video settings length or quality of DVI
cable, press the FUNC
button combined with
the other buttons.
Instruction Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
No. of computer supported
Front Panel Push Button
Hot Plug-and-Play support
Automatic Scan Interval
Cable Length (Max)
4
5
Yes
3, 8, 15, 30 seconds
4.6m(15’) for USB
Computer ON-LINE LED
Computer selected LED
Monitor Type
4
4
DVI
USB Type B x 4
DVI female x 4
Computer peripheral connector
Monitor
USB Type A x 4
DVI female x 1
Console peripheral connector Monitor
Weight (g) (oz.)
900g
31.74oz.
44 x 220 x 130mm
1.7 x 8.7 x 5”
Dimensions
Instruction Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a three year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Download from Www.Somanuals.com. All Manuals Search And Download.
|