PCI Express to 4 Slot PCI Expansion System
PEX2PCI4
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
MDanouawl Rnevliosioand: 04f/r0o4/m2011Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction .......................................................................................................................................................1
Features...........................................................................................................................................................1
Package Contents.....................................................................................................................................1
Installation............................................................................................................................................................2
Using the PCI Express Adapter (typical) .....................................................................................2
Using the ExpressCard Host Adapter Card ..............................................................................4
Software Installation ...............................................................................................................................5
Specifications.....................................................................................................................................................6
EC2PCI (optional).......................................................................................................................................6
Accessory Products from StarTech.com............................................................................................7
Technical Support...........................................................................................................................................8
Warranty Information....................................................................................................................................8
Instruction Manual
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing a StarTech.com PCI Express to Four Slot PCI Expansion Bay. This
product allows you to add PCI expandability to your computer, using an available PCI Express
or ExpressCard* slot, helping to bridge the gap between older PCI expansion cards and
motherboards with newer interface capabilities.
Features
•
•
•
•
Supports 1x 2.5Gb/s PCI Express Data Transfer Rates
IPCI Slots are fully PCI Bus Rev. 2.3 Compliant
Supports both 5V and 3.3V Add-in Cards
Supports Windows 2000/2003/XP/ 7/Vista™/Mac OS X
Package Contents
•
•
•
•
•
•
•
•
1 x PCI Expansion Bay
1 x PCI Express Host Card
1 x Low Profile Bracket
1 x Data Transfer Cable
1 x Power Adapter
1 x Instruction Manual
1 x Driver CD
1 x Screw Kit
Accessories
*Please note that PEX2PCI4 can be connected to a host computer ExpressCard port, using the
EC2PCI ExpressCard to PCI adapter, in place of the PCI Express Card adapter that is packaged
with PEX2PCI4.
As such, if you wish to connect to the PEX2PCI4 using an ExpressCard connection, EC2PCI is a
required accessory.
Instruction Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
WARNING: PEX2PCI4 uses a DVI interface to connect the the PCI Express and PCI components.
When connecting the PCI expansion board to the PCI Express card, please ensure that the DVI
port provided by PEX2PCI4 is not confused with a DVI port provided by the computer video
card, as this could damage the video card, as well as the PCI Express expansion card and PCI
expansion slot board.
Using the PCI Express Adapter (typical)
The following diagram is a visual depiction of the instructions on the following page, which
account for typical installation of the PEX2PCI4 using the (included) PCI Express Adapter Card.
For details on how to install PEX2PCI4 using the optional (not included) ExpressCard adapter
in place of the PCI Express adapter, please refer to the the section titled Using the ExpressCard
Adapter.
1-5
6
8
Instruction Manual
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Turn OFF the computer power before installation, and remove the chassis cover from the
computer. Similarly, ensure the PEX2PCI4 is not powered at this time.
Since both the PC system and the Expansion Box are self-powered, you need to follow the
correct ON/OFF sequence as follows:
Power Off Sequence: Power off your PC system, then the Expansion Box
Power On Sequence: Power on the Expansion Box first, then power on your PC system.
2. Locate an unused PCI Express slot and remove the corresponding slot cover from rear panel
of the computer chassis. Retain the screw (if applicable) used to hold the slot cover in
place.
3. Align the PCI Express card with the unused PCI Express expansion slot. Applying pressure
evenly across the top edge of the expansion card, firmly but gently insert the card into the
slot, ensuring that the card is properly aligned with the rear panel slot.
4. Secure the card to the motherboard and rear chassis, using the screw removed in step 2.
5. Replace the chassis cover (removed in step 1).
6. Connect the included DVI-like* cable to the DVI-like port provided by the newly installed PCI
Express card. Attach the remaining DVI-like connector provided by the cable to the PCI
Expansion Bay DVI port.
7. Open the top cover of the PEX2PCI4 Expansion Box by removing the screws.
There are four PCI slots in the Expansion Box. Find an unused slot, remove the “blank”PCI
card bracket that was pre-installed from the factory.
Insert the PCI card(s) you wish to install, into the available PCI slots, then replace the top
cover of the Expansion Box.
8. Connect the AC Power Adapter to the power port (situated to the left of the DVI-like input) on
the rear panel of the PEX2PCI4 main unit.
9. Turn on the Expansion Box power using the power switch next to the Expansion Cable, then
power on the PC system.
10. Once the Expansion Box has successfully been connected to the host computer, proceed to
the section titled Software Installation.
Instruction Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the ExpressCard Host Adapter Card
The following diagram is a visual depiction of the instructions on the following page, which
account for installation of the PEX2PCI4 using the (accessory) EC2PCI ExpressCard Adapter (must
be purchased separately).
1. Turn OFF the computer power before installation. Since both the PC system and the
Expansion Box are self-powered, you need to follow the correct ON/OFF sequence as
follows:
Power Off Sequence: Power off your PC system, then the Expansion Box
Power On Sequence: Power on the Expansion Box first, then power on your PC system.
6
3
2
4
Instruction Manual
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Open the top cover of the PEX2PCI4 Expansion Box by removing the screws.
There are four PCI slots in the Expansion Box. Find an unused slot, remove the “blank”PCI
card bracket that was pre-installed from the factory.
Insert the PCI card(s) you wish to install, into the available PCI slots, then replace the top
cover of the Expansion Box.
3. Connect the DVI-like* connector on the EC2PCI ExpressCard Host
Adapter Card to the DVI-like port on the rear panel of the PEX2PCI4
Expansion Box.
4. Connect the AC Power Adapter to the power port (situated to the left
of the DVI-like input) on the rear panel of the PEX2PCI4 main unit.
5. Turn on the Expansion Box power using the power switch next to the
Expansion Cable, then power on the PC system
6. Connect the remaining end of the EC2PCI ExpressCard Host Adapter
Card into the unused ExpressCard expansion slot of the host
computer, then power on the host computer.
Software Installation
If you find the write performance of your PCI Card is not as desired, please install the
ExpressBooster software supplied with your card.
*NOTE: When performing this step, please ensure that the DVI port provided by the PCI Express
expansion card is not confused with a DVI port provided by the computer video card, as this
could damage the video card, as well as the PCI Express expansion card and PCI expansion
slot board.
1. Locate the Setup.exe file found on the driver CD. Assuming that E: is the designation for
your CD/DVD-ROM drive, double-click on E:\Utility\ExpressBooster to launch the setup
program.
2. Follow the setup on-screen instructions; ensure that there is a checkmark next to PCI Express
Card for Desktops/Servers only (leave the “ExpressCard”item un-checked). Proceed with
any further on-screen instructions to complete the installation.
Instruction Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
System requirements
Bus Type
PCI
Connectors
PCI Expansion Box:
1 x DVI D (dual link) Female Connector
PCI Express Card:
1 x DVI D (dual link) female connector
Form Factor
PCI Express (x1)
Power Adapter
OS Support
1 x 12V DC, 3 Amp
Windows 2000/2003/XP/ Vista/7/ Mac OS X
CE, FCC, ROHS
Regulatory Certifications
EC2PCI (optional)
Bus Type
ExpressCard
Connectors
1x DVI D Male Connector
1x ExpressCard Connector
OS Support
Windows 2000/XP/2003/Vista/ Mac OS X and
up
Regulatory Certifications
CE, FCC, ROHS
Instruction Manual
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commit-ment to provide industry-
leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the
periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor
costs only. StarTech.com does not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors,
employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, conse-
quential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to
the use of the product exceed the actual price paid for the product. Some states do not allow the exclu-
sion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old
and new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they
need to go. Just talk to one of our tech advisors or visit our website. You’ll be
connected to the products you need in no time.
and to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
Download from Www.Somanuals.com. All Manuals Search And Download.
|