Owner's
Manual
WARNING
!
!
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number:
Product May Vary Slightly From Pictured.
Model#: 35-1399
CAUTION:
Weight on this product should not exceed 250 lbs.
This Product is Produced Exclusively by
STAMINA PRODUCTS
MADE IN CHINA
2040 N. Alliance, Springfield, MO 65803
Customer Service
2010 Stamina Products, Inc.
2010, 07
©
1 (800) 375-7520
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Us First
1C(8us0t0om)3er7S5e-r7v5ic2e0
THANK YOU FOR PURCHASING THE
1399 Air Rower
To help you get started, we have pre-assembled most of your
1399 Air Rower at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts, you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
TELEPHONE
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the 1399 Air Rower. We
Although Stamina constructs its products with
take great pride in producing this quality product the finest materials and uses the highest standards
and hope it will provide many hours of quality of manufacturing and quality control, there can
exercise to make you feel better, look better, and sometimes be missing parts or incorrectly sized
enjoy life to its fullest.
parts. If you have any questions or problems with
It's a proven fact that a regular exercise program the parts included with your 1399 Air Rower, please
can improve your physical and mental health. do not return the product. Contact us FIRST!
Too often, our busy lifestyles limit our time and
If a part is missing or defective, please call
opportunity to exercise. The 1399 Air Rower us toll free at 1-800-375-7520 (in the U.S.). Our
provides a convenient and simple method to begin Customer Service Staff is available to assist you
your assault on getting your body in shape and from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
achieving a happier and healthier lifestyle.
through Thursday and 8:00 A.M. to 3:00 P.M.
Before reading further, please review the (Central Time) on Friday.
drawing below and familiarize yourself with the
parts that are labeled.
If you would like to contact us online, go to our
Read this manual carefully before using the the Customer Service section.
1399 Air Rower. Be sure to have the name and model number of
the product available when you contact us.
Meter
Handlebar
Left Cover
Pedal Strap
Pedal Cap
Right Cover
Front Stabilizer
Main Frame
Seat
Rail
Front Endcap
Pedal Strap
Pedal Cap
Warning Label
Pull Pins
Oval Endcap
Seat Carriage
Oval Endcap
Rear Stand
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY:
Wrench
Allen Wrench (5mm)
Allen Wrench (6mm)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning and notice labels on the 1399 Air Rower. Please
take a moment to familiarize yourself with all of the warning and notice labels.
Label is larger than actual size
W1 WARNING LABEL(105)
!
WARNING
Failure to comply with these warnings could
result in serious injury or death. All warnings
and instructions are to be read prior to use.
Replace this warning label if damaged,
illegible, or removed.
Keep others including children & pets
away from equipment when in use.
BEFORE BEGINNING THIS OR ANY EXERCISE
PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS
ESPECIALLY IMPORTANT FOR PERSONS OVER
THE AGE OF THIRTY-FIVE OR WITH
PREEXISTING HEALTH PROBLEMS. STAMINA®
ASSUMES NO RESPONSIBILITY FOR PERSONAL
INJURY OR PROPERTY DAMAGE SUSTAINED BY
OR THROUGH THE USE OF THIS PRODUCT.
Make sure all nuts and bolts are securely tightened, and
follow all safety tips and instructions set forth herein. This
product should not be used by persons weighing more than
250 lbs. unless otherwise stated in the front of your manual.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
3/16"
1/4"
5/16"
3/8"
1/2"
INCHES
0
0
1/2
1
1/2
2
1/2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part Number and Description
Qty
22
41
Bolt, Button Head (M8 x 1.25 x 25mm)
Bolt, Button Head (M8 x 1.25 x 15mm)
2
2
33
51
Acorn Nut (M8 x 1.25)
Acorn Nut (M10 x 1.5)
2
1
34
35
Lock Washer (M8)
Arc Washer (M8)
5
2
42
52
Washer (M8)
Washer (M10)
2
1
55
57
Bolt, Button Head (M10 x 1.5 x 100mm)
Bolt, Flat Head (M8 x 1.25 x 15mm)
1
2
59
71
Bolt, Hex Head (M8 x 1.25 x 15mm)
1
2
Carriage Bolt (M8 x 1.25 x 65mm)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at
NOTE: There are some packing parts attached on the 1399 Air Rower. Please follow the steps below
to remove them before any assembly. These parts are only for packing, do not dispose of the
packing materials until assembly is completed.
STEP 1
Remove the CARDBOARD ROLLER from the front of the MAIN FRAME(1) by removing the SCREWS
and WASHERS.
STEP 2
A BUCKLE has been attached to the STRAP(24) to prevent the STRAP(24) from returning into the main
body of the 1399 Air Rower during shipping. Remove the BUCKLE by following these steps:
1. Refer to detail view 1. Pull the STRAP(24) away from the main body about 8 inches. Use one hand to
hold the STRAP(24) at position A while using the other hand to pull the STRAP(24) loop on the top of
the BUCKLE to the position as shown in detail view 2.
2. Refer to detail view 2. Continue to hold the STRAP(24) at position A. Pull the STRAP(24) from
position B until the STRAP(24) is completely removed from the BUCKLE. Make sure the STRAP(24)
isn't twisted and let it return into the main body of the 1399 Air Rower. The STRAP(24) will hold the
HANDLEBAR(16) taut against the MAIN FRAME(1).
1.
2.
Buckle
A
A
Cardboard Roller
Buckle
Buckle
B
Screws
Washers
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 3
Make sure the Wheels on the FRONT STABILIZER(7) face the front. Attach the FRONT STABILIZER(7)
to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(71), ARC WASHERS(M8)(35), LOCK
WASHERS(M8)(34), and ACORN NUTS(M8x1.25)(33).
Wheel
Wheel
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 4
Locate the C Ring(48) on the STOPPER BAR(6). Insert the longer end of the STOPPER BAR(6) through
the MAIN FRAME(1). Secure the STOPPER BAR(6) in position with the SPRING CLIP(46).
STEP 5
There is an “L” decal on the LEFT PEDAL CAP(43L), and an “R” decal on the RIGHT PEDAL CAP(43R).
Insert the PEDAL SHAFT(45) through the holes on the MAIN FRAME(1). Place the LEFT PEDAL
CAP(43L) onto the left end of the PEDAL SHAFT(45) and place the RIGHT PEDAL CAP(43R) onto
the right end of the PEDAL SHAFT(45), and slide them toward the MAIN FRAME(1). Then secure the
PEDAL CAPS(43L, 43R) with WASHERS(M8)(42), LOCK WASHERS(M8)(34), and BUTTON HEAD
BOLTS(M8x1.25x15mm)(41) at both sides of the PEDAL SHAFT(45).
NOTE: You need to use two Allen wrenches to tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(41)
at both ends of the PEDAL SHAFT(45) at the same time.
L
R
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 6
Slide the SEAT(66) onto the RAIL(2). Attach the STOPPER BUMPER(56) to the RAIL(2) with BUTTON
HEAD BOLTS(M8x1.25x25mm)(22).Also, please verify that the other STOPPER BUMPER(56) have already
been assembled at the factory. If it has not been pre-assembled, then please assemble at this time.
STEP 7
Attach the REAR STAND(3) to the RAIL(2) with a HEX BOLT(M8x1.25x15mm)(59) and a LOCK
WASHER(M8)(34) from inside the RAIL(2) and two FLAT HEAD BOLTS(M8x1.25x15mm)(57) from
underneath. Tighten all three bolts only after all three have been started. Press the RAIL CAP(53) into the
back end of the RAIL(2).
(Assembled at the factory)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 8
Attach the RAIL(2) to the MAIN FRAME(1) with BUTTON HEAD BOLT(M10x1.5x100mm)(55),
WASHER(M10)(52), and ACORN NUT(M10x1.5)(51). Lock the RAIL(2) in position with the two LOCKING
PINS(54).
STEP 9
Install twoAAbatteries into the METER(67), the batteries are not included. See page 12 for detailed battery
installation instructions. Connect the SENSOR WIRE(68) to the METER(67). Press the METER(67) into
the opening in the COVERS(10, 84).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
POWER ON : Pull the HANDLEBAR(16) or push the
button.
DIST
TIME
CAL
Automatic shut off after four minutes of
inactivity.
POWER OFF :
FUNCTION BUTTON:
Press to select the function value displays of DISTANCE, TIME,
and CALORIES.
Reset all functions to zero by pressing the button and holding
it down for four seconds.
MODE
FUNCTIONS:
SPEED: Displays the current speed on upper display from zero to 999.9 miles per hour.
SCAN: Lower display automatically scans each function of DISTANCE, TIME, and CALORIES
in sequence every six seconds.
DISTANCE: Displays the distance from zero to 99.9 miles.
TIME: Displays the time from one second up to 99:59 minutes.
CALORIES: Displays the calorie consumption from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the MODE button and hold it down for four seconds to reset all functions
to zero.
AA Batteries
HOW TO INSTALL AND REPLACE BATTERIES:
1. Use your hand or a simple tool to pry the METER(67) from the side
covers.
2. The meter operates with two AA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline battery with
another type of battery.
3. Rechargeable batteries are not recommended.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
1. To store the 1399 Air Rower, simply keep it in a clean dry place.
2. To avoid damage to the electronics, remove the batteries before storing the 1399 Air Rower for one
year or more.
3. Move the 1399 Air Rower with the moving wheels on the FRONT STABILIZER(7). Grasp and lift
the REAR STAND(3) to move the 1399 Air Rower. Do not use the SEAT(66) to move the 1399 Air
Rower. The SEAT(66) will move and the SEAT CARRIAGE(4) may pinch your hand or fingers.
4. Follow this process as described and illustrated to fold the 1399 Air Rower for easy storage.
a. Remove the PULL PINS(54) from the MAIN FRAME(1).
NOTE: Lifting the RAIL(2) slightly will make it easier to remove the PULL PINS(54).
b. Fold the RAIL(2) upward. Secure the RAIL(2) in folded position by inserting a PULL PIN(54) into
the RAIL(2) at position A.
c. Insert another PULL PIN(54) into the lower end of the RAIL(2) at B for storage.
Lifting the
RAIL(2) slightly
A
B
MAINTENANCE
The safety and integrity designed into the 1399 AIR ROWER can only be maintained when the 1399 AIR
ROWER is regularly examined for damage and wear. Special attention should be given to the following:
1. Sit on the SEAT(66) and pull on the HANDLEBAR(16) to verify that the Fan System provides resistance
and the Seat travel is smooth and stable.
2. Clean the roller tracks on the RAIL(2) with an absorbent cloth.
3. Verify that the WARNING LABEL(105) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement WARNING LABEL(105) if it is missing or damaged.
4. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5. Worn or damaged components shall be replaced immediately or the 1399 AIR ROWER removed from
service until repair is made.
6. Only Stamina Products supplied components shall be used to maintain/repair the 1399 AIR ROWER.
7. Keep your 1399 AIR ROWER clean by wiping it off with an absorbent cloth after use.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
three fingers on your wrist and take a six second heartbeat count. Multiply
the results by ten to find your heart rate. For example, if your six second
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
wrist pulse
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP and COOL-DOWN
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm-Up
Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place
Stretching while your muscles are warm after a proper warm-up and again after your
Stretching
strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessens, gradually
try a lower position.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
While sitting on the floor,
have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.
Remember to always check with your physician before starting any exercise program.
The purpose of cooling down is to return the body to its normal, or near normal, resting
Cool-Down
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be
completed after each strength training session.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Rail
Rear Stand
Seat Carriage
Foam Spacer
Stopper Bar
Front Stabilizer
Front Endcap
Screw, Round Head (M4 x 12mm)
Left Cover
Screw, Round Head (M5 x 15mm)
Screw, Round Head (M5 x 25mm)
Screw, Round Head (M5 x 70mm)
Foam Grip
Round Plug (25.4mm)
Handlebar
Sleeve (ø16 x 80mm)
Nylock Nut (M8 x 1.25)
Bearing (698z)
1
1
1
1
3
1
1
2
6
1
6
1
1
2
2
1
1
1
2
1
1
4
1
1
1
3
1
12
1
1
1
8
2
5
2
2
2
1
1
1
2
2
2
2
1
1
2
1
2
1
1
1
1
2
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Strap Roller
Spacer Sleeve (ø8.2 x ø10.5 x 26.2mm)
Bolt, Button Head (M8 x 1.25 x 25mm)
Bolt, Button Head (M8 x 1.25 x 57mm)
Strap
V Belt
Bearing (6000z)
Small Belt Pulley
Screw, Round Head (M5 x 0.8 x 12mm)
Strap Bushing
Fan Plate
Fan Wheel
Nylock Nut (M5 x 0.5)
Acorn Nut (M8 x 1.25)
Lock Washer (M8)
Arc Washer (M8)
Bearing (6903z)
One Way Bearing (HF1716)
Bearing Housing
Inner C Ring (30mm)
Fan Axle
Bolt, Button Head (M8 x 1.25 x 15mm)
Washer (M8 x ø22 x 2mm thick)
Pedal Cap
Pedal Strap
Pedal Shaft
Spring Clip
Bushing (ø13 x ø25.4 x 20mm)
C Ring (12.7mm)
C Ring (10mm)
Foam Pad
Acorn Nut (M10 x 1.5)
Washer (M10)
Rail Cap
Pull Pin
Bolt, Button Head (M10 x 1.5 x 100mm)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
Stopper Bumper
2
2
2
1
6
6
3
3
3
4
1
1
1
1
1
2
5
2
2
2
2
2
4
2
1
1
1
2
1
1
2
2
2
2
2
1
2
1
1
1
1
1
1
1
1
1
2
1
2
1
1
1
2
1
Bolt, Flat Head (M8 x 1.25 x 15mm)
Oval Endcap (30mm x 60mm)
Bolt, Hex Head (M8 x 1.25 x 15mm)
Roller Spacer (ø10.2 x ø16 x 5.5mm)
Roller
Spacer Tube (ø10.2 x ø12 x 66mm)
Nylock Nut (M10 x 1.5 x 7mm Thick)
Bolt, Button Head (M10 x 1.5 x 105mm)
Bolt, Round Head (M6 x 1 x 15mm)
Seat
Meter
Sensor Wire
Screw, Round Head (M5 x 8mm)
Magnet
Carriage Bolt (M8 x 1.25 x 65mm)
Nut (3/8"-26 x 7mm thick)
Rubber Stand
Washer (M6)
Screw, Round Head (M5 x 12mm)
Foam Pad (25 x 25 x 5mm thick)
Nylon Washer (ø17.5 x ø25 x 1 mm thick)
Washer (ø17.2 x ø21 x 1 mm thick)
Nylon Washer (ø10.2 x ø16.5 x 1 mm thick)
Support Plate
C Ring (17mm)
Nylon Washer (ø10.2 x ø16 x 0.5 mm thick)
Protection Cap
Right Cover
Sensor Clip
Flange Nut (3/8"-26)
Eyelet Bolt (M6 x 1 x 35mm)
Tension Bracket
Nut (M6 x 1)
Screw, Round Head (M3 x 12mm)
Spring Box Cover
Thin Nut (3/8"-26, 0.16" thick)
Spring Holder
Spring Core
Set screw (M4 x 0.7 x 6mm)
Spring
Pulley Axle
Spring Box
Belt Pulley
C Ring (9mm)
Washer (ø10.2 x ø13 x 0.5 mm thick)
Screw, Flat Head (M5 x 0.8 x 12mm)
Rubbing Disc
Washer (ø5 x ø11 x 1 mm thick)
Warning Label
Wrench
Allen Wrench (5mm)
Allen Wrench (6mm) w/ Screwdriver
Manual
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL 35-1399
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and three years on
the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL
NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE,
MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY
REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED
BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health
clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the
product's use is in furtherance of a profit making enterprise, and all other use which is not for personal,
family, or household purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to
return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH
OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE
DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR
BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER
DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF
ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY
IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any
implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,
at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed
warranty registration card is not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS
OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY
IMPLIED WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This
warranty gives you specific legal rights, and you may also have other legal rights which vary from state
to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods
to disclaim or limit implied warranties and consequential and incidental damages with respect thereto.
If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages with respect thereto shall be disregarded and shall
be deemed not to have been made to the extent necessary to comply with such legal restriction.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina's Customer Service Department can be
reached by email at [email protected] or toll free at 1-800-375-7520 (in the U.S.).
Should a part be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central
Time, Monday through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering
form below and fax it to (417)889-8064. Our Customer Service Department will be able to assist you with
your problem and the part will be mailed directly to your house.
TELEPHONE
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT : We must have your phone number in order to process the order!
Work Phone #: (
Phone #: (
)
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|