BY
MOTORIZED TREADMILL
OWNER’S MANUAL
IN300T
IN400T
P art No. 22412
Download from Www.Somanuals.com. All Manuals Search And Download.
BY
CONGRATULATIONS ON YOUR
NEW TREADMILL AND WELCOME
TO THE SPIRIT FAMILY!
Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc.
Your new treadmill was manufactured by one of the leading fitness manufacturers in the
world and is backed by one of the most comprehensive warranties available*. Through
your dealer, Spirit will do all we can to make your ownership experience as pleasant as
possible for many years to come.
The local dealership where you purchased this treadmill is your administrator for all
Spirit warranty and service needs. Their responsibility is to provide you with the techni-
cal knowledge and service personnel to make your experience more informed and any
difficulties easier to remedy. Please take a moment at this time to record the name of
the dealer, their telephone number, and the date of purchase below to make any future,
needed contact easy.
WeCONGRATULATIONS ON YOUR appreciate your support and we will always remember
that you are the reason that we are in business.
Please complete and mail your registration card today and enjoy
your new treadmill.
Yours in Health,
Spirit Manufacturing, Inc.
Name of Dealer______________________________________
Telephone Number of Dealer___________________________
Purchase Date_______________________________________
*All claims are based upon published, available data at the time of this manual’s printing. Through our program of constant product improvement, some specifications are
subject to change without notice.
Product Registration
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in the space provided below.
Serial Number________________________________
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to
Spirit Manufacturing, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
WARNING - Read all instructions before using this appliance.
DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill
from the electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons,
install the treadmill on a flat level surface with access to a 120-volt, 20-amp
grounded outlet. DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO
DISABLE THE GROUNDED PLUG BY USING IMPROPER ADAPTERS, OR IN ANY
WAY MODIFY THE CORD SET. A serious shock or fire hazard may result along
with computer malfunctions. See Grounding Instructions, page 3.
■ Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.
■ Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance
between the rear of the treadmill and any fixed object.
■ Keep children away from the treadmill. There are obvious pinch points and other
caution areas that can cause harm.
■ Keep hands away from all moving parts.
■ Never operate the treadmill if it has a damaged cord or plug. If it is not working
properly, call your dealer.
■ Keep the cord away from heated surfaces.
■ Do not operate where aerosol spray products are being used or where oxygen is
being administered.
■ Never drop or insert any object into any openings.
■ Do not use outdoors.
■ To disconnect, turn all controls to the off position, remove tether cord, then remove
plug from outlet.
■ Do not attempt to use your treadmill for any purpose other than for the purpose it is
intended.
■ The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
■ Use handrails provided; they are for your safety.
■ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
to be used on your treadmill. Quality athletic shoes are recommended to avoid leg
fatigue.
Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Electrical Information
WARNING!
■
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.
Route the power cord away from any moving part of the treadmill including the eleva-
tion mechanism and transport wheels.
■
NEVER remove any cover without first disconnecting AC power.
■
If voltage varies by ten percent (10%) or more, the performance of your treadmill may
be affected. Such conditions are not covered under your warranty. If you suspect
your voltage is low, contact your local power company or a licensed electrician for
testing. See Diagnosis Guide, page 15.
■
NEVER expose this treadmill to rain or moisture. This product is NOT designed for
use outdoors, near a pool or spa, or in any other high humidity environment.
■
A red lighted power switch is located on the front base near the power cord. It is not
necessary to trun this switch off except when service issues arise.
Grounding Instructions
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result
in a risk of electric shock. Check with a qualified electrician or serviceman if you
are in doubt as to whether the product is properly grounded. Do not modify the
plug provided with the product - if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that
looks like the plug illustrated in sketch A. A temporary adapter that looks like the
adapter illustrated in sketches B and C may be used to connect this plug to a 2-pole
receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded outlet (sketch A) can
be installed by a qualified electrician. The green colored rigid ear, lug, or the like
extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is used, it must be held in
place by a metal screw.
Grounded Outlet
Adapter
Metal Screw
Tab for
Grounding
Screw
Grounding Pin
Grounded Outlet Box
A
B
C
IN300T
IN400T
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Operation Instructions
■
NEVER operate this treadmill without reading and completely understanding the results
of any operational change you request from the computer.
■
Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The computer will
obey the command gradually.
■
NEVER use your treadmill during an electrical storm. Surges may occur in your house-
hold power supply that could damage treadmill components.
■
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance or
stray from walking in the center of the belt; which may result in serious injury.
■
NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills start
with zero speed and it is unnecessary to straddle the belt during start up. Simply standing
on the belt during slow acceleration is proper after you have learned to operate the unit.
■
Always hold on to a handrail or grab bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control overlays. They are precision set to
function properly with little finger pressure. Pushing harder is not going to make the unit go
faster or slower. If you feel the buttons are not functioning properly with normal pressure
contact your Spirit dealer; adjustments can be made. All buttons should operate and
control treadmill functions without excessive finger effort. Damage to overlay will result if
excessive control pressure continues.
Safety Tether Cord
A safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the treadbelt.
Pulling this safety tether cord will stop treadbelt movement.
To Use:
1. Place magnet into position on the yellow portion of the console control head. Your
treadmill will not start and operate without this. Removing the magnet also secures the
treadmill from unauthorized use.
2. Fasten the plastic clip onto your clothing securely to assure good holding power. Note:
The magnet has strong enough power to minimize accidental, unexpected stopping and
the clip should be attached securely to make certain it does not come off. Be familiar with
its function and limitations.
The treadmill will stop, depending on speed, with a one to two step coast anytime the mag-
net is pulled off the console. Use the red Stop / Pause switch in normal operation.
IN300T
IN400T
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IN300T / 400T Folding Instructions
CAUTION!
You must be able to safely lift 40 lbs. in order to raise / lower and move the treadmill.
To Fold The Treadmill:
Make certain the treadmill is at minimum incline. Lift the treadmill running deck until it
is secured by the locking telescoping tube assembly in center back of base.
To Unfold The Treadmill:
Apply slight forward pressure* on the treadmill running deck with one hand. Lift up on the
orange unlocking lever and slowly lower the running deck to the floor. Do not allow the base
to drop. It becomes heavier at waist level.
*At the rear roller area to relieve pressure on the locking system.
Transport
Do not attempt to move the unit unless it is in the locked position. Be sure the power cord
is secured to avoid possible damage. It may be awkward and difficult to maneuver for
many individuals. Use both hand rails to maneuver the unit to desired position.
5
IN300T / 400T
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Your Treadmill
Note: Refer to upper drawing showing console display layout. IN400T display is shown,
IN300T is similar. You have two option control choices for speed and incline. The right hand
handle bar has a remote speed switch offering the same function as the display control keys.
The left hand handle bar remotely controls incline.
DO NOT S TAND ON THE WAL K ING B E LT WHIL E L E AR NING
TO OP E R ATE YOUR NE W TR E ADMIL L !!
B as ic Operation*:
S TE P 1: Press and release S tart / Dis play On key to wake display up (if not already on).
Note: If installing the tether key, the display is already lit (woke up).
S TE P 2: Press and release S tart / Dis play On key to begin belt movement at .6 mph and
adjust speed with Fas t / S low keys (console or hand rail). You must have belt
movement for Fas t / S low keys to function. You may also select the rapid speed
adjust values 2 thru 10.
S TE P 3: To slow treadbelt push and maintain S low key (console or hand rail) to desired
speed. You may also select the rapid speed adjust values 2 thru 10.
S TE P 4: To stop treadbelt, depress and maintain pressure on the S low key (console or
hand rail) or press and release red S top key.
*Tether cord must be in position. See also page 7, To Turn Treadmill Off, item (1). Display is in
manual mode when 1/4 mile track is displayed.
E laps ed Time F eature:
When display is lit (before belt movement) you may adjust the time up (value will flash) for
countdown to automatic shut off (no belt movement). Use Adjus t Up / Down keys to set to
desired time before belt movement.
P aus e F eature:
S TE P 1: When operating the treadbelt, the pause feature may be utilized by pressing
the red S top key. This will slowly decelerate the treadbelt to zero. Time,
Distance and Calorie will hold while unit is in the pause mode. After 4 minutes
the display will blank out but values are held in memory to resume workout. This
feature can be used in manual or programmable mode.
S TE P 2: To resume your exercise, you must reset desired speed (in manual mode). See
above step 2.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Incline Feature:
ꢀ May be adjusted anytime after belt movement.
ꢀ Press and maintain Adjust ■■ keys (console or hand rail) to achieve desired level of
effort. You may also choose a more rapid increase / decrease by selecting desired
value on left hand (incline).
ꢀ Display will indicate incline percent as adjustments are made.
ꢀ Incline will remain in it’s position when display is turned off.
Dot Matrix Center Display (Manual Operation):
Twenty rows of “dots”(8 high) indicate each segment of a workout. The dots are only to
show an approximate level (speed/incline) of effort. They do not necessarily indicate a
specific value - only an approximate percent to compare levels of intensity.
In Manual Operation the Speed / Incline dot matrix window will build a profile “picture” as
values are changed during a workout. The dot matrix window will show the speed profile
when mph is adjusted. Asmall flashing light (near Speed window) indicates the dot matrix
value is speed. If incline is adjusted (small light is steady), the dot matrix window will
become an incline profile. Only a slight press of the appropriate key is required to change
the dot matrix display from speed to incline (visa-versa). This window will remain a speed
or incline profile based on last adjustment. Only the vertical segment that flashes will be
changed (along with all to the right). This display profile picture is based on a 20 minute
workout. After 20 minutes the dot will adjust “backwards” (to the left).
1/4 Mile Track*:
The 1/4 mile track will be displayed around the dot matrix window. The flashing dot indi-
cates your progress. Once the 1/4 mile is complete this feature will begin again.
*Manual operation only
Reset Feature*:
While in Pause mode, press and maintain the ENTER reset key until the clock, Distance
and Calorie values zero out. You may restart your workout with different values or reset
clock (countdown).
*Manual operation only
Pulse Grip Feature:
The Pulse (Heart Rate) console window will display your current heart rate in beats per
minute during the workout. You must use both stainless steel sensors on the front cross bar
to display your pulse. Pulse value displays anytime the upper display is receiving a Grip
Pulse signal. You may not use the Grip Pulse feature while in Heart Rate Control.
Note: Refer to Important Safety Instructions (page 2) concerning Pulse Grip operation.
Calorie Display:
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions, which
cannot be used for medical purposes. Calories are not calculated while in Heart Rate
Control.
To Turn Treadmill Off (Blank out Display):
Two methods accomplish this: Use either one.
(1) Display will automatically turn off (blank out) after 4 minutes (no key operations) in
Pause / Stop mode. Display will “wake” back up in mode it was in when it auto-
matically blanked out.
(2) Remove tether cord. This clears the display to “wake” back up in Manual mode.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmable Features
The SL Series offers 7 factory preset programs on the IN400T and 10 on the IN300T unit.
Note: You may change any speed / incline level during a workout. It will not be held in memory.
Each preset program (P-1 and up) has a maximum speed and incline level that is dis-
played when a desired workout is chosen. The maximum speed that the particular pro-
gram will achieve will be displayed in the Speed window. Similar with incline.
Also included are two user programs (U-1 / U-2) for custom workouts.
Programmable Operation of Your Treadmill
To Select a Program:
STEP 1: Press and release the START key. Display will light.
STEP 2: Press the PROGRAM key. The Speed window will display the maximum
speed that this program will achieve. The Incline window will display the
maximum incline of this program.
STEP 3: All programs have the workout preset at 20 minutes. You may adjust up from 20
minutes (countdown) using Adjust ■■ keys.
STEP 4: After selecting a program, press and release the START key.
Treadmill will begin to move and workout has begun.
Note: The segment time will always be 1/20th of the session time. Within 5 seconds of the end
of a segment run, a chime will alert a change. This statement applies to both preset and user
programs.
Dot Matrix Display:
Both Incline and Speed profiles will be displayed. However, only one (speed or incline) will
be displayed at a time. Anytime the speed is adjusted the display will illustrate that (speed)
profile. Similar with incline. Only a slight press of the appropriate key is required to
change the dot matrix display from speed to incline (visa-versa). Ared dot just left below
Speed window, will flash if the dot matrix is profiling mph. Asolid red light indicates an
incline profile. This statement also applies to Manual operation.
User Programs:
STEP 1: Select User U-1 or U-2 via the PROGRAM key. Note that the dot matrix display
portion will have a single row of dots at the bottom.
STEP 2: Note the clock (Time) window is flashing. Use the Adjust ■■ keys to adjust up
from 20 minutes (if desired). Press ENTER key. This is a must to continue
even if time is not adjusted.
Note: The time (countdown) value is not held in memory.
STEP 3: Using the Fast / Slow key adjust the speed level to your desired effort. Similar
with incline Adjust ■■ keys.
STEP 4: Press ENTER key. Note the next row of dots will flash. This indicates the next
segment (out of 20) that will be programmed. Repeat step 2 and continue that
procedure until all segments (20) are complete.
STEP 5: Press and release the START key to begin workout.
8
IN300T 400T
Download from Www.Somanuals.com. All Manuals Search And Download.
Target Heart Rate
■ The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of
exercising comfortably. Agreat deal of this success has been promoted by the use of heart
rate monitors. With the proper use of a heart rate monitor, many people find that their
choice of exercise intensity is either too high or too low and exercise is much more enjoy-
able by maintaining their heart rate in the desired benefit range.
■
To determine the
TARGET HEART RATE
TRAINING CHART
200
190
180
170
160
150
140
130
120
110
100
benefit range in which
you wish to train, you
must first determine your
Maximum Heart Rate.
This can be accom-
plished by using the
following formula: 220 -
User’sAge = Maximum
Heart Rate. After calcu-
lating your Maximum
Heart Rate, you can
decide upon which goal
you would like to pursue.
The two most popular
reasons for, or goals of
exercise, are cardiovas-
cular fitness (training for
the heart and lungs) and
weight control. The
20 25 30 35 40 45 50 55 60 65
Age of User
Weight Loss
Cardiovascular
black columns on the
chart above represent the Maximum Heart Rate for a person whose age is listed at the
bottom of each column. The training heart rate for either cardiovascular fitness or weight
loss is represented by two different lines that cut diagonally through the chart. Adefinition
of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is cardiovascular
fitness or if it is weight loss, it can be achieved by training at 90% or 70%, respectively, of
your Maximum Heart Rate on a schedule approved by your physician. Consult your physi-
cian before participating in any exercise program.
■
With all Spirit Heart Rate Control treadmills, you may use the heart rate monitor feature
without using the Heart Rate Control program. This function can be used during manual
mode or during any of the nine different programs. The Heart Rate Control program auto-
matically controls incline and overrides manual adjustment of incline grade.
Note: Refer to Heart Rate Control Operation for computer calculated target heart rate.
CAUTION!
The target value used in H-1 and H-2 programs is a suggestion only for normal, healthy
individuals. Do not exceed your limits! You may not be able to obtain your chosen
target. If in question, enter a higher age value that will set a lower target goal.
IN300T / 400T
09/24/04
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Heart Rate Transmitter
The included chest strap is a special high frequency design to minimize outside noise
interference. It is not compatible with other brands of wrist moniters. The on-board radio
receiver is also not compatible with most transmitter chest straps (Polar for example).
How to wear your wireless chest strap transmitter:
1. Attach the transmitter to the elastic strap using the locking parts.
2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain
comfortable.
3. Position the transmitter with the Spirit logo centered in the middle of your body facing
away from your chest (some people must position the transmitter slightly left of
center). Attach the final end of the elastic strap by inserting the round end and,
using the locking parts, secure the transmitter and strap around your chest.
4. Position the transmitter immediately below the pectoral muscles.
5. Sweat is the best conductor to measure very minute heart beat electrical signals.
However, plain water can also be used to pre-wet the electrodes (2 black square areas
on the reverse side of the belt and either side of transmitter). It’s also recommended
that you wear the transmitter strap a few minutes before your work out. Some users,
because of body chemistry, have a more difficult time in achieving a strong, steady
signal at the beginning. After “warming up”, this problem lessens. As noted, wearing
clothing over the transmitter/strap doesn’t effect performance.
6. Your workout must be within range - distance between transmitter/receiver - to
achieve a strong steady signal. The length of range may vary somewhat but generally
stay close enough to the console to maintain good, strong, reliable readings.
Wearing the transmitter immediately against bare skin assures you of proper
operation. If you wish, you may wear the transmitter over a shirt. To do so, moisten
the areas of the shirt that the electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it
automatically deactivates when it does not receive any activity. Although the transmitter is water resistant,
moisture can have the effect of creating false signals, so you should take precautions to completely dry the
transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement
battery is Panasonic CR2032.
Erratic Operation:
Caution! Do not use this treadmill for Heart Rate Control unless a steady, solid
Actual Heart Rate value is being displayed. High, wild, random numbers being
displayed indicate a problem.
If you are receiving erratic radio signals, the large center display will show ERR. You must
correct the cause of interference to continue.
Areas to look for on interference:
(1) Treadmill not properly grounded - Amust!
(2) Microwave ovens, T.V.’s, small appliances, etc.
(3) Fluorescent lights.
(4) Some household security systems.
(5) Perimeter fence for a pet.
(6) Loose treadmill console / upright.
IN300T /400T
09/24/04
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Control
WARNING!
DO NOT USE THE HEART RATE CONTROL PROGRAM IF YOUR HEART RATE IS
NOT REGISTERING PROPERLY ON THE TREADMILL’S DISPLAY!
Special Operations of Heart Rate Functions:
All Spirit treadmills that are factory equipped with a Heart Rate Control system have many
distinct features both in the Heart Rate Control program and during heart rate monitoring.
This section will give you a more detailed background to use your treadmill in the most
effective manner.
How the Heart Rate Control Program Works:
Heart Rate Control uses your treadmill’s incline system to adjust your heart rate. Increases
and decreases in elevation affect heart rate much more efficiently than changes in speed.
Additionally, changes in incline keep you in control of the machine’s speed instead of the
machine controlling you.
Note: Once you begin the Heart Rate Control mode by pressing the START key, you cannot
make incline adjustments by pressing the “UP” and “DOWN” keys. The computer makes all
incline adjustments for you.
Selecting a Heart Rate Control Program (H-1 to H-3):
You have the option, during the setup mode, to choose either the Weight Control (H-1)
program or the Cardiovascular (H-2) program. Weight Control attempts to maintain your
heart rate at 70% of your Maximum Heart Rate. Cardiovascular attempts to maintain your
heart rate at 90% of your Maximum Heart Rate. Your Maximum Heart Rate is based upon
a formula that subtracts your age from 220. Your age input is performed during the setup
mode.
Note: H-3 program allows you to set the desired target before belt movement regardless of age
input or set percentages.
CAUTION!
The target value used in H-1 and H-2 programs is a suggestion only for normal,
healthy individuals. Do not exceed your limits! You may not be able to obtain your
chosen target. If in question, enter a higher age value that will set a lower target goal.
Program H-3 allows the user to set the desired target and should be used if H-1 / H-2
levels do not match the user’s ability.
IN300T/ 400T
09/24/04
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Control Operation
CAUTION!
Intended for wireless transmitter chest strap only. Do not use Pulse Grip bar for
Heart Rate Control. You must receive a strong / steady value in heart rate window. See
page 10.
STEP 1: Press and release the START key.
STEP 2: Use PROGRAM key to choose one of 3 heart rate control programs (H-1 thru H-3).
STEP 3: If choosing H-1 or H-2 anAge value (30) will appear in Incline window. Use
Adjust ■■ keys to match your age. Press ENTER key. This age input value
will be held in memory.
STEP 4: You may, if desired, adjust the Time (countdown) up from 20:00 minutes.
STEP 5: Press and release START key to begin your workout.
Note: Calorie calculation does not function in Heart Rate Control.
Heart Rate Monitor (Only)
The display will automatically show a heart rate value when receiving a signal input (chest
strap or pulse grip). You may use this feature in Manual mode or any Programmable
workout.
Note: Pulse Grip option is considered a monitor only. Do not use for Heart Rate Control.
IN300T / 400T
09/24/04
12
Download from Www.Somanuals.com. All Manuals Search And Download.
General Maintenance
Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance
is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or
paper towel to wipe the edge of the belt and the area between the belt edge and frame.
Also reach as far as practical directly under the belt edge. This should be done once a
month to extend belt and bed life. Use water only - no cleaners or abrasives. A mild
soap and water solution along with a nylon scrub brush will clean the top of the textured
belt. Allow to dry before using.
Belt Dust - This occurs during normal break-in or until the belt stabilizes. Wiping
excess off with a damp cloth will minimize buildup.
General Cleaning - Dirt, dust, and pet hair can block air inlets and accumulate on the
running belt. On a monthly basis, vacuum underneath your treadmill to prevent
buildup. Once a year, you should remove the black motor hood and vacuum out dirt
that may accumulate. UNPLUG POWER CORD BEFORE THIS TASK.
BELT ADJUSTMENTS:
Treadbelt Tension Adjustment - Belt tension is not critical for most users. It is very
important for joggers and runners in order to provide a smooth, steady running surface.
Adjustment must be made from the right side of the rear roller in order to adjust tension
with the 6 mm Allen wrench provided in the parts package. The adjustment bolt is
located at the end of the right side rail as noted in diagram below.
Belt Tension
Adjustment
Side Only
Tracking
Adjustment
Side Only
Note: Adjustment is thru small hole of end cap.
Tighten the rear roller only enough to prevent slippage at the front roller. Turn the
treadbelt tension adjusting bolt in increments of 1/4 turn and inspect for proper tension.
When an adjustment is made to the belt tension, you must also make a tracking
adjustment to compensate for the change in belt tension. This is accomplished by
turning both the tension and tracking Allen bolts an equal amount. This adjustment
should be made by turning both bolts clockwise by no more than a 1/4 turn at a time.
DO NOT OVERTIGHTEN - Overtightening will cause belt damage and premature
bearing failure.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TREADBELT TRACKING ADJUSTMENT:
The performance of your treadmill is dependent on the frame running on a reasonably
level surface. If the frame is not level, the front and back roller cannot run parallel, and
constant belt adjustment may be necessary.
The treadmill is designed to keep the treadbelt reasonably centered while in use. It is
normal for some belts to vary near a side while the belt is running with no one on it.
After a few minutes of use, the treadbelt should have a tendency to center itself. If,
during use, the belt continues to move toward one side, adjustments are necessary.
TO SET TREADBELT TRACKING:
A 6 mm Allen wrench is provided to adjust the rear roller. Make tracking adjustments
from the left side only. Set belt speed at
CAUTION - KEEP HANDS CLEAR
approximately 2 to 3 mph. A small adjust-
OF MOVING REAR PULLEY!
ment can make a dramatic difference. Turn
the bolt only a 1/4 turn and wait a few minutes
for the belt to adjust itself. Continue to make
1/4 turns until the belt stabilizes in the center
of the running deck.
The belt may require periodic tracking adjust-
ment depending on use and walking/running
Note: Adjustment is thru small hole of end cap.
characteristics. Some users will affect track-
Belt will move in direction of allen wrench.
ing differently. Expect to make adjustments
as required to center the treadbelt. Adjustments will become less of a maintenance
concern as the belt is used. Proper belt tracking is an owner responsibility common
with all treadmills.
ATTENTION:
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING /
TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY.
BELT / DECK LUBRICATION:
Do not relube with other than Spirit lubricant. Spirit provides one application with this
unit. See your Spirit dealer for additional purchases. The use of some other lubricants
may destroy the deck surface or belt and will void warranty. Conditions exist beyond
Spirit’s control on belt / deck cleanliness which relates to friction.
You should apply the enclosed belt lubrication after approximately the first 50 hours of
operation. Use all the contents of one container (no more) and spread lubricant onto
middle portion (away from edges) of the deck (under treadbelt) along it’s width. When
walked on, the belt will make certain an even coat is applied. Lubricant is not harmful
to the skin. Lube will be distributed properly by walking at 2 to 3 mph for 3 to 5 minutes
on all areas of the belt. Use handrails for support. The first few minutes you will be
polishing your deck and lubricating the belt backing. Do not run on a newly lubri-
cated belt until the above break-in procedure is done. If the treadmill belt/deck is
kept reasonably clean it is possible to expect over 1000 hours before additional
relubing is necessary.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Checklist - Diagnosis Guide
Before contacting your dealer for aid, please review the following information. It may
save you both time and expense. This list includes common problems that may not be
covered under the treadmill’s warranty.
PROBLEM
SOLUTION/CAUSE
Tether cord not in position.
Circuit breaker on front grill tripped. Push circuit breaker in until it locks.
Plug is disconnected. Make sure plug is firmly pushed into AC
household wall outlet.
Display does not light
Household circuit breaker may be tripped.
Treadmill defect. Contact your Spirit dealer.
See General Maintenance section under Belt Tracking.
A user may be walking while favoring or putting more weight on either
the left or right foot. If this walking pattern is natural, track the belt
slightly off-center to the side opposite from the belt movement.
Treadbelt does not
stay centered
Treadmill belt hesitates
when walked/run on
See Maintenance section on Treadbelt Tension. Adjust as necessary.
Make certain clock is running. This indicates motor should be
receiving power to operate. Contact your Spirit dealer. Diagnostics
will indicate if warrantable.
Motor is not
responsive / Display
is lit
Possible treadmill defect. Contact your Spirit dealer. Diagnostics
will indicate if warrantable.
Low AC voltage to treadmill. Do not use an extension cord. If an
extension cord is required it should be as short as possible and
heavy duty 16 gauge minimum.
Treadmill will only
achieve approximately
7 mph but shows
higher speed on dis-
play
Low household voltage. Contact an electrician or your Spirit dealer.
A minimum of 110 volt AC current is required.
Treadbelt stops
quickly/suddenly when
tether cord is pulled
High belt/deck friction. See General Maintenance section on lubrication.
High belt/deck friction. See General Maintenance section on lubrication.
Treadmill trips on
board 15 amp circuit
breaker when running/
walking
Computer shuts off
when console is
touched (on a cold day)
while walking/running
Treadmill is not grounded. Static electricity is “crashing” the com-
puter. Refer to Grounding Instructions on page 3.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer’s Limited Warranty
Effective October 15, 2003
TREADMILL WARRANTY
Spirit Manufacturing Inc. warrants all its treadmills’ parts for a period of one (1) year from the date of retail sale, as determined by
sale receipt, or eighteen (18) months from the original factory shipping date, whichever comes first. Spirit’s responsibilities
include providing new or remanufactured parts, at Spirit’s option, and technical support to our independent dealers and servicing
organizations. In the absence of a dealer or service organization, these warranties will be administered by Spirit directly to a
consumer. An extended warranty period applies to the following components:
IN300T Series
10 Years
2 Years
IN400T Series
10 Years
2 Years
2 Years
Lifetime
Drive Motor
Deck Wear
Electronics / Belt / Rollers
Frame Weldments
All Other Components
2 Years
Lifetime
2 Years
2 Years
NORMALRESPONSIBILITIESOFTHECONSUMER
This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original
purchase to validate the manufacturer’s limited warranty.
2. Proper use of the treadmill in accordance with the instructions provided in this manual, including belt tracking.
3. Proper installation by an authorized Spirit servicer in accordance with instructions provided with the treadmill and with all local
electric codes.
4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections
or defects in house wiring.
5. Expenses for making the treadmill accessible for servicing, including any item that was not part of the treadmill at the time it
was shipped from the factory.
6. Damages to the treadmill finish during shipping, installation or following installation.
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL,COLLATERAL,ORINCIDENTALDAMAGESSUCHASPROPERTYDAMAGEANDINCIDENTALEXPENSES
RESULTINGFROMANYBREACHOFTHISWRITTENORANYIMPLIEDWARRANTY.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or
exclusion may not apply to you.
2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or
defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call
reimbursement period, for treadmills not requiring component replacement, or treadmills not in ordinary household use.
3. Damages caused by services performed by persons other than authorized Spirit servicers; use of parts other than original
Spirit parts; or external causes such as alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate
power supply, or acts of God.
4. Products with original serial numbers that have been removed or altered.
5. Products that have been sold, transferred, bartered, or given to a third party.
6. Products that do not have a warranty registration card on file at Spirit Mfg. Spirit reserves the right to request proof of
purchase if no warranty record exists for the product.
7. THISWARRANTYISEXPRESSLYINLIEUOFALLOTHERWARRANTIESEXPRESSEDORIMPLIED, INCLUDINGTHEWARRAN-
TIESOFMERCHANTABILITYAND/ORFITNESSFORAPARTICULARPURPOSE.
SERVICE
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory
shipping as determined by the serial number establishes the warranty period should service be required. If service is performed,
it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have
other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized Spirit dealer. OR
2. Contact your local authorized Spirit service organization.
3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107.
4. If no local service is available, Spirit will repair or replace the parts, at Spirit’s option, within the warranty period at no charge
for parts. All transportation costs, both to our factory and upon return to the owner, are the responsibility of the owner. The
owner is responsible for adequate packaging upon return to Spirit. Spirit is not responsible for damages in shipping. Make all
freight damage claims with the appropriate freight carrier. DO NOTSHIPANY UNITTO OUR FACTORYWITHOUTARETURN
AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused.
5. For any further information, or to contact our service department by mail, send your correspondence to:
Spirit Manufacturing, Inc.
P.O. Box 2037
Jonesboro,AR 72402-2037
Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by
Spirit Manufacturing, Inc. This warranty applies only in the 50 states of the U.S.A. and Canada.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|