DIGITAL CAMERA
OWNER’S MANUAL
KT7002
Download from Www.Somanuals.com. All Manuals Search And Download.
2. TABLE OF CONTENTS
1.
2.
3.
4.
5.
WELCOME TO THE WORLD OF HELLO KITTY......................................................................... - 1 -
TABLE OF CONTENTS.................................................................................................................... - 2 -
SYSTEM REQUIREMENTS............................................................................................................. - 3 -
PACKAGE CONTENTS.................................................................................................................... - 3 -
SOFTWARE INSTALLATION .......................................................................................................... - 3 -
HELLO KITTY DIGITAL CAMERA DRIVER, MYDSC2 AND PCCAM ........................................................................................- 3 -
HELLO KITTY STUDIO ..........................................................................................................................................................- 4 -
6.
7.
8.
POWER SOURCES........................................................................................................................... - 4 -
BATTERIES INSTALLATION ...................................................................................................................................................- 4 -
BATTERY GUIDANCE............................................................................................................................................................- 4 -
FUNCTIONS AND CONTROLS ...................................................................................................... - 5 -
HELLO KITTY DIGITAL CAMERA...........................................................................................................................................- 5 -
LCD DISPLAY......................................................................................................................................................................- 5 -
GETTING STARTED......................................................................................................................... - 5 -
GENERAL OPERATION .........................................................................................................................................................- 5 -
TAKING IMAGES ...................................................................................................................................................................- 6 -
TAKING VIDEOS ...................................................................................................................................................................- 6 -
FUNCTIONAL OPERATION ....................................................................................................................................................- 7 -
9.
CONNECTING THE CAMERA TO YOUR COMPUTER.............................................................. - 8 -
10.
UPLOADING IMAGES/VIDEOS TO YOUR COMPUTER............................................................ - 8 -
RUNNING MYDSC2 FOR UPLOADING IMAGES/VIDEOS.........................................................................................................- 8 -
RUNNING PCCAM FOR CREATING LIVE VIDEO CLIPS .........................................................................................................- 9 -
́
11.
HELLO KITTY STUDIO (FOR WINDOWS USER ONLY) .........................................................- 10 -
PHOTO LIBRARY................................................................................................................................................................- 10 -
EDIT CENTER.....................................................................................................................................................................- 10 -
PRINT CENTER ..................................................................................................................................................................- 10 -
SLIDE SHOW......................................................................................................................................................................- 10 -
STORY MAKER...................................................................................................................................................................- 10 -
GAME CENTER ..................................................................................................................................................................- 11 -
12.
13.
14.
15.
16.
CARE AND MAINTENANCE ..........................................................................................................- 11 -
COMPLIANCE WITH FCC REGULATIONS.................................................................................- 11 -
TROUBLESHOOTING GUIDE........................................................................................................- 12 -
TECHNICAL SPECIFICATION .......................................................................................................- 13 -
SERVICE............................................................................................................................................- 13 -
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. SYSTEM REQUIREMENTS
́
For Windows Users
́
́
ò
ò
ò
ò
ò
ò
ò
ò
Compatible with Microsoft Windows 98, ME, 2000 or XP
Intel Pentium III 800MHz or higher
128MB RAM or higher
USB 1.1 Port
80MB Hard disk space free
CD-ROM drive
Color monitor with high color (16-bit) graphic capability or higher
Standard mouse and keyboard
́
́
4. PACKAGE CONTENTS
ò
ò
Hello Kitty Digital Camera
Hello Kitty Studio CD-ROM
(Includes Hello Kitty Camera Driver, MyDsc2, PCCam and Hello Kitty Studio)
ò
ò
ò
ò
Hello Kitty Neck Strap
Owners Manual
USB Cable
Warranty Card
5. SOFTWARE INSTALLATION
́
For Windows Users
Hello Kitty Digital Camera Driver, MyDsc2 and PCCam
ò
MyDsc2
MyDsc2 provides an easy-to-use interface for uploading images and videos from the Hello Kitty Digital
Camera to your computer.
ò
PCCam
PCCam is a powerful video capture program, which provides you a full-featured platform to create your
own digital video!
ò
1.
How to Install Hello Kitty Digital Camera Driver, MyDsc2 and PCCam
Insert the CD-ROM disc into the CD-ROM drive and close the CD-ROM
drawer.
2.
3.
4.
5.
Installation wizard will automatically launch.
Click the “Install Hello Kitty Camera Driver” icon.
Follow the instructions presented on the screen to complete the installation.
Click “Yes, I want to restart my computer now” and “Finish” to restart your computer and wait for
your PC to restart automatically.
Note:
If the setup screen doesn’t appear after loading the CD, then you can
manually start it by double-clicking the “My Computer” icon on your desktop,
then double-clicking the icon for the CD-ROM drive. When the CD-ROM
window opens, double-clicks the “launcher.exe” file.
ò
Uninstalling your Hello Kitty Digital Camera Driver, MyDsc2 and PCCam
To uninstall Hello Kitty Digital Camera Driver, MyDsc2 and PCCam, click the “Start Menu” on your
Windows desktop, choose “MyDsc2” folder under Program and choose “Uninstall”. Follow the onscreen
instructions.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
́
For Windows Users
Hello Kitty Studio
ò
Hello Kitty Studio
Hello Kitty Studio is designed for your complete Hello Kitty experience, you can print, email and share
your Hello Kitty digital creations!
ò
1.
How to Install Hello Kitty Studio
Insert the CD-ROM disc into the CD-ROM drive and close the
CD-ROM drawer.
2.
3.
4.
Installation wizard will automatically launch.
Click the “Install Hello Kitty Studio Photo Fun and Games” icon.
Follow the instructions presented on the screen to complete the
installation.
5.
Click “OK” to complete the installation wizard.
ò
1.
2.
3.
4.
5.
Uninstalling your Hello Kitty Studio
Re-insert the CD-ROM disc into the CD-ROM drive and close the CD-ROM drawer.
Installation wizard will automatically launch.
Click the “Uninstall Hello Kitty Studio Photo Fun and Games” icon.
Follow the instructions presented on the screen to uninstall the Hello Kitty Studio.
Click “OK” to complete the uninstalling wizard.
6. POWER SOURCES
Batteries Installation
1.
2.
Press in and slide out the battery compartment door.
Following the polarity diagram inside the battery compartment, install 2 “AAA” size (UM-4)
batteries.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
3.
Push down and slide closed the battery compartment door
Note:
To avoid losing images when changing the batteries, please make sure all your images and videos have
been uploaded to your PC before changing the batteries. You can also replace the batteries when the
camera is plugged into your PC via the USB cable. The computer must be turned on if you choose to
replace the batteries using this option.
Battery Guidance
WARNINGS!
• Batteries should only be replaced by an adult.
• Alkaline, standard (carbon-zinc) and other non-rechargeable batteries must not be recharged.
• Rechargeable batteries must be removed from the camera before being charged.
• Rechargeable batteries must only to be charged under adult supervision.
• Never mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only use batteries recommended by the manufacturer.
• Batteries must be inserted with the correct polarity.
• Exhausted batteries are to be removed from the camera.
• The supply terminals must not to be short-circuited.
• Do not dispose of the batteries in ›re. Batteries may explode or leak.
• Batteries should be removed from the camera when not in use.
These instructions should be retained for future reference.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7. FUNCTIONS AND CONTROLS
Hello Kitty Digital Camera
7
6
5
4
3
2
1
6
8
12
11
3
10
9
1.
Buzzer
7.
USB Cable Port
Lens
Shutter Indicator
Flash
Neck Strap Holder
Battery Compartment
2.
3.
4.
5.
6.
LCD Display
8.
Shutter Button
Flash Indicator
Mode/Power Button
Viewfinder
9.
10.
11.
12.
LCD Display
2b
2c
2d
2e
2a.
2b.
2c.
2d.
2e.
2f.
2g.
2h.
2i.
High Resolution
Low Resolution
Delete Last
2a
2f
Delete All
Continuous Shot
USB Connection
Self-Timer
Video Capture
Battery Indicator
Mode Operation
3-Digit Icon
2g
2h
2k
2j.
2k.
2i
2j
8. GETTING STARTED
General Operation
ò
Power On
Press Mode/Power button (#5) to power on the camera.
LCD display (#2) will show
images currently stored.
(#2a) and
(#2i), the 3-Digit Icon (#2k) will show the total number of
ò
Power Off
In Normal Shot Mode, press Mode/Power button (#5) 1 time to choose Power Off Mode. The 3-Digit Icon
(#2k) will show
. Press the Shutter button (#3) again to turn off the camera.
The camera will automatically turn off after 30 seconds of inactivity.
Note:
When the camera is OFF the LCD Display (#2) will be blank, but a constant trickle of power from the
battery will keep images and video stored in memory.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ò
Mode Selection
Every time the Mode/Power button (#5) is pressed, the corresponding mode appears in the LCD display
(#2), in the following sequence:
Normal Shot
Power Off*
Flash On/Off*
Self-Timer Shot
AVI Video
Continuous Shot
Delete All Images
Flash Auto*
Mode/Power
Power Frequency
Image Compression
Image Resolution
Delete Single Image
*Note:
Power Off, Flash On/Off and Flash Auto Modes are disabled when using the USB cable.
Taking Images
ò
Normal Shot Mode
The camera will be in Normal Shot Mode when first turned ON. It will also return to Normal Shot Mode
after inactivity for 5 seconds.
Frame your subject using the viewfinder (#6).
Press the Shutter button (#3) to take a picture. The buzzer (#1) will beep and Shutter Indicator (#9) will
blink. One beep sound indicates that the image was taken successfully and the 3-Digit Icon (#2k) will
count up by one.
Note:
Two beep sounds indicates the camera was unable to take a picture and the Shutter Indicator (#9) will
not blink. There may be insufficient light to take the image or the camera memory is full.
When the camera memory is full, the 3-Digit Icon (#2k) will display
and flash for 3 seconds.
ò
Self-Timer Shot Mode
In Normal Shot Mode, press Mode/Power button (#5) 3 times to choose Self-Timer Shot Mode. The LCD
display (#2) will show (#2g). The self-timer will delay for 10 seconds.
Frame your subject using the viewfinder (#6).
Press Shutter button (#3) to take a picture. The buzzer (#1) and Shutter Indicator (#9) will beep and flash
repeatedly for 10 seconds during the count down. A long-beep tone after the last beep indicates the
image was taken successfully.
ò
Continuous Shot Mode
In Normal Shot Mode, press Mode/Power button (#5) 5 times to choose Continuous Shot Mode. The
LCD display (#2) will show
Shutter button (#3) is pressed.
(#2e). The camera will take 3 consecutive pictures at a time when the
Frame your subject using the viewfinder (#6).
Press the Shutter button (#3) to take a picture. The buzzer (#1) and Shutter Indicator (#9) will beep and
blink repeatedly 3 times. Each time indicates a successful picture has been taken.
Taking Videos
ò
AVI Video Mode
In Normal Shot Mode, press Mode/Power button (#5) 4 times to choose AVI Video Mode. LCD display
(#2) will show (#2h).
Frame your subject using the viewfinder (#6).
Press and hold the Shutter button (#3) to capture videos. The buzzer (#1) will continuously sound until
the shutter button (#3) is released, or the camera memory is full. In both cases the camera will stop
capturing video. The 3-Digit Icon (#2k) will count up by one when complete.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Functional Operation
ò
Deleting a Single Image
In Normal Shot Mode, press Mode/Power button (#5) 7 times to choose Delete Single Image Mode. LCD
Display (#2) will show
(#2c).
Press Shutter button (#3) to delete the last image, the 3-Digit Icon (#2k) will count down by one when the
process is completed.
ò
Deleting All Images
In Normal Shot Mode, press Mode/Power button (#5) 6 times to choose Delete All Images Mode. LCD
Display (#2) will show
(#2d).
Press the Shutter button (#3) once, the 3-Digit Icon (#2k) will flash for 5 seconds. Press the Shutter
button (#3) again within the 5 seconds to delete all the stored images in memory. The 3-Digit Icon (#2k)
will show
.
ò
Image Resolution
There are 2 selectable image resolutions available: High ( ) or Low.(
In Normal Shot Mode, press Mode/Power button (#5) 8 times to choose Image Resolution Mode. LCD
)
Display (#2) will show
image resolution.
(#2j), and either
(#2a) or
(#2b) will flash to indicate the current
Press Shutter button (#3) again to select another resolution setting.
Image Compression
ò
There are 2 selectable image compression methods: Compressed ( ) or Non-Compressed ( ).
In Normal Shot Mode, press Mode/Power button (#5) 9 times to choose the desired Image Compression
Mode. The LCD Display (#2) will show
(#2j), the 3-Digit Icon (#2k) will show either
or
, which
indicates the current image compression method.
Press the Shutter button (#3) again to select another image compression method.
ò
Power Frequency
There are 2 power frequencies selectable: 50 or 60.
In Normal Shot Mode, press Mode/Power button (#5) 10 times to choose Power Frequency Mode. LCD
Display (#2) will show
(#2j), the 3-Digit Icon (#2k) will show either 50 or 60, which indicates the
current power frequency setting.
Press the Shutter button (#3) again to select a different power frequency setting.
ò
Flash On/Off
In Normal Shot Mode, press Mode/Power button (#5) 2 times to choose Flash On/Off Mode. The 3-Digit
Icon (#2k) will show either
(Flash OFF) or
(Flash ON), which indicates the current Flash setting.
Press the Shutter button (#3) again to select another setting.
Note:
Flash (#10) will be turned OFF each time the camera is powered on. Turn it on manually whenever
necessary.
Please wait for the Flash Indicator (#4) to light before taking any photos requiring a Flash.
When the battery power becomes too low to charge the flash, the camera will automatically turn the
Flash (#10) OFF.
ò
Flash Auto
In Normal Shot Mode, press Mode/Power button (#5) 11 times to choose Flash Auto Mode. The LCD
Display (#2) will show (#2j), the 3-Digit Icon (#2k) will show either (Flash forced on) or
(Flash auto), which indicates the current setting.
In Flash Forced On Mode, the Flash (#10) will flash every time pictures are taken. In Flash Auto Mode
the flash will only be on if the camera senses more light is needed in order to take the photo.
Press the Shutter button (#3) again to select another setting.
Note:
The Flash Indicator (#4) must be lit prior to taking photos in either setting for the Flash to work properly.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9. CONNECTING THE CAMERA TO YOUR COMPUTER
The USB cable allows you to upload images and videos from your Hello Kitty Digital Camera to your
computer. One end of the cable connects to the USB port (#7) on the side of the Hello Kitty Digital
Camera, while other end connects to your computer’s USB port. When the Hello Kitty Digital Camera is
connected to your computer, it will draw power from the USB cable and preserve the cameras battery life.
The USB port can be found on the front or back panel of your computer. Look for this symbol
to the connection port. (Also see your computers operating manual for the location of your USB
connection port.)
next
10. UPLOADING IMAGES/VIDEOS TO YOUR COMPUTER
́
For Windows Users
Running MyDsc2 for Uploading Images/Videos
1.
2.
Connect your Hello Kitty Digital Camera to your computer via the USB Cable.
Run the MyDsc2 application.
Select the MyDsc2 icon from the MyDsc2 program group on Windows Start Menu or double-click
the MyDsc2 shortcut icon inside the MyDsc2 folder on the Desktop.
ò
To Upload Images/Videos
To upload images/videos to your computer, click the “Upload Photos” Icon
Note: When uploading images/videos, the LCD display will show (#2f)
.
ò
To View Images/Videos
The MyDsc2 application shows 12 images/videos on each page, click
Right-click on an image to preview.
or
to view other pages.
ò
To Edit Images
To edit an image, click the “Edit Image” Icon
.
ò
To Save Images/Videos
Select the images/videos by left-clicking the images/videos you wanted, or by clicking the “Select All
Photos in This Page” Icon
to select all images on the current page.
to save your selected images.
Click the “Save Photos” Icon
Uploaded Image
Uploaded Video
Minimize the MyDsc2
Close the MyDsc2
“Upload Photos” Icon
Select next page
“Edit Images” Icon
Select next page
“Save Photos” Icon
“Select All Photos in This Page” Icon
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
́
For Windows Users
Running PCCam for Creating Live Video Clips
1.
2.
Connect your Hello Kitty Digital Camera to your computer via the USB Cable.
Run the PCCam application.
Select the PCCam icon from the MyDsc2 program group on Windows Start Menu or double-click
the PCCam shortcut icon inside the MyDsc2 folder
on the Desktop.
Title Bar
Preview Scene
ò
To Preview a Scene
To preview your scene, click “Preview” under the
“Options” Title Bar.
ò
To Adjust Resolution
There are 3 selectable resolutions: 160x120, 320x240 and 640x480
To adjust resolution, click the “Video Capture Pin” under the “Options” Title Bar.
ò
To Adjust Frame Rate
To adjust frame rate (number of frame per second) and time limit (time to capture your video clip) of your
live video clip, click “Set Frame Rate” and “Set Time Limit” under “Capture” Title Bar.
Click “Use Frame Rate” to apply preset frame rate.
For example:
Set 10fps to capture 10 frames of video at every
second.
Click “Use Time Limit” to apply preset time limit.
For example:
Set 10s to capture 10 seconds of video.
Note:
The camera supports a maximum of 10fps at 640x480 resolution and 20fps for 320x240 and 160x120
resolutions.
ò
Miscellaneous Settings
To set a default path and filename of your video clip, click “Set Capture File” under the “File” Title Bar.
e.g. To set default path and filename as C:\Documents and Settings\User\Desktop\MyVideo.avi
To adjust the video imaging properties, click “Video Capture Filter” under “Options” Title Bar.
ò
To Capture Live Video
To start capturing, click “Start Capture” under the “Capture” Title Bar, then click “OK” for the pop-up
messenger.
To stop the video capture, click “Stop Capture” under the “Capture” Title Bar.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
́
11. HELLO KITTY STUDIO (FOR WINDOWS USER ONLY)
Photo Library
Use the photo library to manage your photos. Use the import buttons
to select and import photos into the Hello Kitty Studio program.
When photos are imported, they are organized by category. The
categories correspond to the name of the folder where the original
photo resides.
Once photos are imported, you can select one or more photos for
editing or printing.
Edit Center
Use any of the 18 editing tools to modify your photo. Then save your
edited photo for future use in the Hello Kitty Studio.
Note:
Your original photo will not be altered when you use the edit center.
Print Center
Select one or more photos from the Photo Library, then go to the
print center to print or export them.
Hello Kitty Studio offers several printing formats and print options
including layouts, image names and photo frames.
Use the export option in the print center to save a copy of the photo
to your computer in .jpg or .pdf format. Choose the reduced option to
create a smaller file that works better with e-mail.
Slide Show
Select a category of Hello Kitty Studio photos for a slide show. Page
through the photos one by one, or select the auto-play option to
display the photos automatically.
Story Maker
Create a story using your Hello Kitty Studio photos. Then save your
story or export it to your computer as a .jpg or .pdf file. Choose from
5 colorful Hello Kitty templates.
Download from Www.Somanuals.co-m1.0A-ll Manuals Search And Download.
Game Center
Play 5 great games that use your photos in the game!
Choose from Pixel Paddle, Photo Jigsaw, Click Flip,
Shutter Bug or Photo Tiles.
12. CARE AND MAINTENANCE
Your Hello Kitty Digital Camera should only be operated within the following environmental conditions:
• 41 – 104o Fahrenheit; 5 – 40o Celsius.
• 20% - 85% relative humidity, non-condensing.
Battery life or image quality may be affected outside these conditions.
Camera Cautions:
ò
ò
ò
ò
ò
Never immerse any part of the camera or its components into any fluid or liquid.
Disconnect the camera from your computer before cleaning it.
Remove dust or stains with a soft cloth dampened with water or neutral detergent.
Do not place hot items on the surface of the camera.
Do not attempt to open or disassemble the camera. This will affect any warranty claim.
13. COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation. Warning: Changes or medications
to this unit not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded cable must be used with this unit to ensure compliance with the Class B FCC limits.
Under the environment with electrostatic discharge, the product may malfunction and require user to
reset the product.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
14. TROUBLESHOOTING GUIDE
The troubleshooting guide is designed to help you. If problems continue, please contact your local
customer support hot-line. See your registration card for hotline contact details.
́
For Windows Users
Symptom
Problem
Solution
I
receive an error message Hello Kitty Digital Camera Shut down all other applications and attempt to
when I am installing the Hello Driver does not load.
Kitty Digital Camera Driver.
re-install the driver, or download the updated driver
from
and install the updated driver.
Check the USB controller in your BIOS if they are
activated. If these do not work contact your national
Customer Support representative.
MyDsc2 folder is not found in The installer for the Hello Kitty Install the software, restart your PC, and then
the Programs menu after
have installed the driver.
I
Digital Camera Driver requires connect the Hello Kitty Digital Camera to the PC via
the Hello Kitty Digital Camera the USB port, the software folder will appear in the
be connected to the PC (via Program menu.
the USB) after the software
has been installed & the PC
restarted.
All the images I have taken do You have lost power to your Hello Kitty Digital Camera by either:
not appear on the Hello Kitty
Insufficient battery power
Upload all images to your PC as soon as possible.
(Please refer to Battery Guidance section in User’s
Manual.)
Digital Camera.
Removing the battery without If you need to change batteries and save the images
being connected to your PC in your camera’s memory, you need to be connected
(turned on) via the USB cable. to a PC via the USB cable, and make sure the PC is
ON. The camera will now be powered by the USB
cable while you insert fresh batteries.
I cannot upload images to the Connection failure
PC
Check that all cable connections are secured and
that both plugs are fully inserted.
I pressed shutter button but no The Hello Kitty Digital Camera Wait for the Flash Indicator to turn on and then take
response after I turned on the is charging the flash unit another picture.
flash.
The Battery Indicator is This
flashing. insufficient power.
cannot run the MyDsc2 Conflict with another camera If you have any other camera installed on your
and/or processing the image.
means there is You need to change the batteries.
I
Application.
driver capture device.
computer, remove the camera and its driver
completely from your system to avoid conflict with
another camera or capture device.
My CD Installation wizard The auto installation ›le is Go to the computer desktop. Right click on “My
does not work.
switched to off.
or
Computer”. Click “Properties”. Select “Device
Manager”. Double click on “CD-ROM”, double click
The CD-ROM is disconnected. on “CD-R” (normally the manufacturer’s name).
Click on “Settings”. Ensure “Auto insert notification”
is ticked and the “disconnect” is ticked. If you
change the settings the computer will ask you to
restart your PC. Click “Yes”.
́
(Only for Windows 98 and ME user)
Please also refer to the help files & User Guides that accompany the enclosed applications.
For further information and updated software support (driver and application program), please
visit the following website:
Download from Www.Somanuals.co-m1.2A-ll Manuals Search And Download.
15. TECHNICAL SPECIFICATION
ò
ò
Memory: 8MB SDRAM
Still Image Resolution:
High Resolution:
640 x 480 pixels (VGA)
320 x 240 pixels (QVGA)
Low Resolution:
ò
ò
Image Performance for Video:
High Resolution:
Low Resolution:
7-10 fps (frame per second)
15-20 fps
Image Capacity*:
Non-compressed: VGA
QVGA
VGA
QVGA
- Approx. 24 Images
- Approx. 93 Images
- Approx. 84 Images
- Approx. 179 Images
Compressed:
ò
ò
ò
Video Clips: unlimited when connected to the computer via video capture software.
Self-Timer: Electronic self-timer with 10 seconds delay.
File Format (For Windows Users):
́
Still Image:
JPEG format
Video Image:
AVI format
ò
ò
ò
ò
ò
Interface: USB v1.1
External Connector: USB
Auto Power Off: 30 seconds after inactivity
Power Supply: USB Port, 2 x AAA (UM-4) Batteries (Not Included)
Operating System:
́
́
́
For Windows Users: Microsoft Windows 98, Me, 2000 or XP
*Note: Scene complexity affects an image’s file size. The number of images you can store on the camera
may vary.
16. SERVICE
Please refer to the instructions on the enclosed warranty card for returning your unit for service. When
returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible
battery leakage. We are not responsible for batteries returned with the product or for the cost of
replacement.
Distributes by:
Spectra Merchandising International, Inc.
4230 North Normandy Avenue
Chicago, IL 60634, U.S.A.
Please have model number ready, for Customer Service, call 1-800-777-5331
Printed in China
© 1976, 2004 Sanrio Co., Ltd.
Download from Www.Somanuals.co-m1.3A-ll Manuals Search And Download.
|