VM-1401C
14” Color Monitor with Audio
Our high performance 14” color monitor offers
420 lines of resolution. It features one camera
input, 1 audio input, a hi/lo impedance switch, up
front controls, and a composite video with loop
through. The monitor provides crisp, clear images
that allow you to observe details even in smaller
video inset boxes common on quad and multiplex-
er displays. It is UL and CSA listed.
Specifications
Resolution
Horizontal
420 lines
Vertical
380 lines
Linearity Horizontal
Linearity Vertical
Front Control
10% maximum
10%
Power switch On/Off rocker switch
Color/Contrast/Bright/Tint (NTSC only):
rotary control - Volume: rotary switch
96~256 Vac, 50Hz/60Hz
40W
Electrical Input Voltage
Power Consumption
Input Signal
0.5 to 2.0 Vp-p composite video,
negative synchronization Y:1.0 Vp-p, C:0.7 VP-p
75 ohms or high (switchable)
6 MHz
Input Impedance
Bandwidth
Video Gain
30 db
Operation System
NTSC
525 lines, 60 fields/sec
625 lines, 50 fields/sec
PAL
Connections
Video (In/Out)
Audio (In/Out)
Audio Input Signal
Audio Amplifier
Environmental Operation Temperature
Storage Temperature
General Construction
Dimensions
BNC x 2, S-VHS x 1
RCA Jack x 2
10~150m Vp-p
1W/8 ohm (Incl. a speaker)
14 to 122˚F
-4 to 158˚F (30-90%RH)
Steel cabinet with plastic front panel
12.5”L x 14”W x 12.6”H
20 lbs.
Weight (per unit)
Certifications
UL, CE, CSA FDA, FCC, CUL, TUV
Specifications subject to change
For more information contact us at:
Toll Free: 1-800-D6o4w5n-lo5a5d1f6romInWMwewt.rSoomNaYnu: a6l3s.1co-m95. A7l-l8M7a0n0uaFlsaSxe:a6rc3h1A-9nd57D-o9w1n4lo2ado. r 631-957-3880
|