Spalding Fitness Equipment M88604C1 User Manual

High End Residential  
In-Ground Basketball System  
Owners Manual  
Customer Service Center  
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.  
Adult Assembly Required.  
This manual, accompanied by sales receipt, should be saved and kept on hand as a convenient reference, as it contains  
important information about your model.  
Write Model Number  
From Box Here:  
WARNING!  
READ AND UNDERSTAND OPERATOR'S  
MANUAL BEFORE USING THIS UNIT.  
FAILURE TO FOLLOW OPERATING  
INSTRUCTIONS COULD RESULT IN  
INJURY OR DAMAGE TO PROPERTY.  
Toll-Free Customer Service Number for U.S: 1-800-334-9111  
08/06  
ID# M88604C1  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
Item Qty. Part No.  
Description  
1
2
3
1
1
1
968880  
908266  
Pole  
Tube, Ground Anchor, Black  
Rim Assembly  
4
1
Net  
5
6
7
8
4
4
4
1
1
3
1
1
1
1
1
1
1
1
26  
1
16  
9*  
2
9
8
1
4*  
2*  
4
2
1
1
2*  
4
205702  
203300  
205700  
204922  
204923  
204993  
516000  
204940  
Nut, Hex, 3/8-16  
Washer, Locking, 3/8  
Bolt, Hex, 3/8-16 x 3.5” Long  
Pin, Hitch  
Pin, Cotter, #8  
Rebar, .5” diameter, 18” Long  
Label, Height Adjustment  
Screw Jack  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
ID# 516000 06/05  
11  
Backboard  
80854501  
204921  
Rod, Threaded Assembly, 5/8-11 x 19.8”, Zinc  
Washer, Barrel  
Cover, Rim  
978881  
988881  
204670A  
202900  
202651  
206340  
220048  
200704  
265575  
215008  
203309  
224728  
204733  
204735  
204741  
204742  
206311  
205830  
Yoke, Upper, Center, Pole  
Yoke, Lower, Center, Pole  
Bushing, Plastic  
Bolt, Hex, 1/2-13 x 5, Zinc  
Washer, Flat, 0.053” I.D., 1.08” O.D., Zinc  
Nut, Lock, Nylon Insert, 1/2-13, Zinc  
Bolt, Hex Head, 1/2”-13 x 6”, Zinc  
Washer, Flat, 0.656” I.D., 1.313” O.D., Zinc  
Nut, Hex, 5/8-11, Zinc  
Nut, Hex, 5/8-11, Grade 8, Black  
Washer, Flat, 3/8”  
Bolt, Hex, 1/2-13 x 9.25, Black Zinc  
Screw, #8, .50 Long  
Height Indicator, Plastic  
Label, Height Indicator, Right  
Label, Height Indicator, Left  
Spacer, .52 I.D. x .75 I.D. x .5” Long, Plastic  
Bolt, Hex, 1/2-13 x 2.5, Zinc  
* You May Have Extra Parts With This Model.  
08/06  
ID# M88604C1  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE IDENTIFIER (BOLTS & SCREWS)  
Item #23 (2)  
Item #20 (1)  
Item #29 (4)  
Item #7 (4)  
Item #28 (2)*  
Item #34 (4)  
HARDWARE IDENTIFIER (NUTS, WASHERS & SPACERS)  
Item #33 (2)*  
Item #6 (4)  
Item #27 (4)*  
Item #21 (16)  
Item #24 (9)  
Item #5 (4)  
Item #22 (9)*  
Item #25 (4)  
Item #26 (1)  
HARDWARE IDENTIFIER (OTHER-NOT ACTUAL SIZE)  
Item #9 (1)  
Item #15 (1)  
Item #19 (26)  
Item #8 (1)  
ID# M88604C1  
08/06  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ensure ground is level with playing surface, then dig pole hole.  
1.  
24" (61 cm)  
48" (121.9 cm)  
WARNING!  
24" (61 cm)  
GROUND SURFACE  
PLAYING SURFACE  
48" (121.9 cm)  
CONTACT UTILITIES  
BEFORE DIGGING.  
Install nuts (25) onto the ground tube bolts as shown.  
2.  
25  
NOTE:  
Nuts on the top of the plate are used  
for leveling the pole after system is  
fully assembled.  
2
08/06  
ID# M88604C1  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fill hole with concrete. Tamp down concrete to release air pockets  
and build drainage hill.  
3.  
DRAINAGE HILL  
1" (2.54 cm)  
PLAYING SURFACE  
SIDE VIEW  
4.  
Insert rebar (10) through holes in ground tube assembly (2) as shown.  
2
10  
10  
10  
ID# M88604C1  
08/06  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insert ground tube assembly (2) into cement as shown. Move assembly around to release any air  
pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure to level  
mounting plate on top of drainage hill. Level mounting plate and square with playing surface. Clean off  
any excess cement on mounting plate at this time and place washers (24) on mounting bolts (19).  
5.  
2
10  
IMPORTANT!  
NOTE ORIENTATION  
10  
Front of mounting  
plate (2) must be  
parallel with playing  
10  
surface.  
24  
24  
24  
PLAYING SURFACE  
24  
PLAYING SURFACE  
IMPORTANT!  
Check leveling of mounting plate  
several times with carpenter’s level  
while concrete is curing.  
IMPORTANT!: WAIT A MINIMUM OF 72 HOURS BEFORE GOING ON  
TO NEXT STEP. CONCRETE MUST CURE. ALLOW ADDITIONAL TIME  
FOR COLD, WET OR HUMID WEATHER.  
08/06  
ID# M88604C1  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insert bushings (19) into areas shown.  
6.  
13  
19  
19  
19  
19  
19  
19  
19  
19  
19  
19  
19  
19  
19  
19  
1
17  
19  
19  
19  
19  
18  
19  
19  
19  
ID# M88604C1  
08/06  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rest top of pole on a piece of scrap wood (not included) and line up holes in pole (1) to holes in  
mounting plate (2) as shown.  
7A.  
1
WARNING!  
PLAYING SURFACE  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SCRAP WOOD  
(NOT INCLUDED)  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
1
2
PLAYING SURFACE  
Insert bolt (23) through holes in plate and pole and secure with nut (22).  
7B.  
1
23  
22  
08/06  
ID# M88604C1  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
8.  
WARNING!  
TWO people are required to lift pole into  
position so that the threaded assembly  
rod (14) can be installed and secured by  
the THIRD person.  
While pole is being supported by TWO  
capable adults, position rod (14) and lock  
into place with hitch pin (8) and cotter pin  
(9).  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
Slide barrel washer (15) onto other end of  
rod (14) and secure with washer (24) and  
nut (26). Tighten nut (26) until it is  
positioned at 3-3/4” from the end of the  
rod (14) as shown (Figure A)  
Completed Assembly  
26  
24  
15  
1
1
14  
9
8
26  
FIGURE  
A.  
14  
ID# M88604C1  
08/06  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.  
While still in forward position, attach both upper  
and lower yokes (17 & 18) to pole as shown.  
WARNING!  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
22  
21  
17  
18  
21  
28  
08/06  
ID# M88604C1  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attach elevator adjustment (12) to  
lower yoke (18).  
10.  
WARNING!  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
22  
21  
18  
19  
12  
19  
21  
20  
ID# M88604C1  
08/06  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attach elevator adjustment (12) to pole bracket.  
11.  
WARNING!  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
21  
21  
23  
22  
33  
33  
12  
08/06  
ID# M88604C1  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attach backboard (13) to upper and lower  
yokes (18 & 17).  
12.  
A.  
Then, hinge board to match up with holes in  
lower yoke (18), FIG. C, and secure with  
hardware as shown in FIG. D.  
B.  
First attach board (13) to upper yoke (17),  
using TWO people to hold the board and  
ONE person to attach hardware (FIG. A).  
Use hardware as shown in FIG. B.  
WARNING!  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
FIG. A  
FIG. C  
FIG. D  
13  
FIG. B  
13  
21  
21  
21  
21  
34  
34  
22  
22  
21  
21  
21  
21  
34  
34  
22  
22  
17  
17  
18  
18  
ID# M88604C1  
08/06  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before starting rim assembly, tighten nut (26) until it is positioned 6-3/4” from  
the end of the rod as shown (Figure A).  
13.  
Remove rim cover (16), attach rim assembly (3) to backboard (13) and  
reattach rim cover (16).  
** For rim assembly, see instructions included with rim.  
IMPORTANT!  
Carefully cut and peel  
protective film away from  
board prior to attaching rim.  
14  
26  
FIGURE  
A.  
5
6
13  
Rim Assembly  
16  
3
Refer To Instructions  
Included With Rim  
Hardware For Rim  
Assembly.  
27  
27  
7
7
08/06  
ID# M88604C1  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14.  
A.  
Set-up For Left Side  
Set-up For Right Side  
Apply height indicator  
labels (32 & 31) to height  
indicators (30).  
30  
30  
10  
10  
9
9
7
8 7  
8
31  
10  
32  
10  
7
9
8
9
8 7  
Attach height indicators to lower yoke in area shown by turning  
screws (29) into place with a phillips-head screwdriver.  
B.  
IMPORTANT!  
10  
29  
9
8
7
NOTE ORIENTATION  
OF HEIGHT  
INDICATORS:  
10’ MARK SHOULD  
FACE AWAY FROM  
BACKBOARD.  
Attach height indicators  
to lower yoke in area  
shown by turning  
screws (29) into place  
with a phillips-head  
screwdriver.  
C.  
10  
9
8
7
29  
Install net (4) to rim as shown.  
15.  
1.  
2.  
4.  
3.  
ID# M88604C1  
08/06  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16.  
Upright pole (1) by tightening nut (26).  
Using 15/16” wrench, turn nut (26) clockwise to  
begin standing pole upright. Continue to turn nut (26)  
until pole has come to rest against washers (24) and  
pole is vertical.  
WARNING!  
THREE CAPABLE ADULTS REQUIRED FOR THIS  
PROCEDURE. TWO PEOPLE ARE REQUIRED TO  
GUIDE AND SUPPORT THE SYSTEM WHILE THE  
THIRD PERSON IS TIGHTENING NUT (26) TO  
RAISE THE SYSTEM UPRIGHT.  
Once pole is in its final position, install washers (24)  
and nuts (25) onto bolts (19) and fully tighten to  
secure pole to anchor plate.  
FAILURE TO FOLLOW THIS WARNING COULD  
RESULT IN SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
1
WARNING!  
NING  
T
R
RESUL  
GE.  
Y
MA  
DAMA  
WA  
ARNINGSTY  
W
OPER  
w
T
H
E
S
E
P
R
W
follo  
and  
FOLLO  
Y
AND/OR  
w
TO  
kno  
er  
s
system.  
y
F
AILURE  
IN  
a
l
l
p
l
a
o
f
t
h
e
SERIOUS INJUR that  
ensure  
e
operation  
pr  
for  
or  
saf  
must  
for  
installation.system  
Owner  
rules  
oper  
o
f
t
h
e
t
these  
ual  
a
n
y
p
a
r
o
r
n
e
t
.
t
y
p
e
man  
d
,
r
i
m
rim  
braces  
dunk  
kboar in  
orming  
bac  
the  
d,  
t
i
n
s
t
r
u
c
t
i
o
n
o
n
suppor  
See  
DO  
HANG  
perf  
om the  
if  
come  
T
fr  
NO  
kboar  
y
w
h
e
n
w
a
y
bac  
a
teeth/face  
e
s
p
e
c
i
a
l
l
face  
l
u
d
i
n
g
y
,
occur  
inc  
During  
pla  
keep  
activities,Serious  
y
er's  
pla  
injur  
y
fr  
om  
y
couldor  
net.  
.
awa  
rim  
on  
pole  
fing  
and  
er  
s
d,  
y
p
l
a
kboar  
bac  
limb,  
o
r
net.  
and  
with  
shake  
hands  
,
c
keep  
system.  
adjust  
hes,  
watc  
c
o
n
t
a
c
t
s
l
i
d
e
height,  
not  
or  
y
Do  
adjusting  
ts.  
move  
jewelr  
,
litter  
to  
(
r
i
n
g
s
,
in  
base  
n
e
t
.
W
h
e
n
p
a
r
.
Grass,  
ving  
not  
w
c
hildren  
entangle  
pole  
mo  
Do  
allo  
pla  
wear  
y
not  
ma  
do  
om  
y
,
fr  
pitting,  
(rust,  
deterioration.  
If  
paint.  
osion  
objects  
y
awa  
or  
During  
klaces,  
ganic  
etc.);  
and  
of  
materialosion  
corr  
e
n
a
m
e
l
nec  
eep  
,
r
e
p
l
a
c
e
or  
signs  
xterior  
c
a
u
s
e
c
o
r
f
r
or  
with  
e
an  
ywhere  
K
with  
c
o
u
l
d
s
y
s
t
e
m
steel  
loose  
etc.  
Chec  
k
pole  
r
e
p
a
i
n
t
o
u
g
h
t
h
e
b
a
l
l
a
s
t
,
r
e
p
a
i
r
and  
thr  
oper  
corr  
and  
pr  
for  
use  
eac  
signs  
osion  
c
hipping)penetrated y.  
has  
h
and  
wear  
rust  
the  
Chec  
immediate  
o
l
re  
bef  
.
pole  
k
system  
for instability  
use  
times.  
excessive  
,
h
eac  
dware  
har  
bef  
ore  
g
u
s
i
n
g
.
b
e
f
equipment.  
ore  
k
ed  
a
t
a
l
l
cap  
s
y
s
t
e
m
d
a
m
a
with  
C
h
e
c
on  
p
l
a
y
vered  
co  
top  
ver  
N
e
p
o
l
e
K
eep  
2/99  
201255  
1-800-558-5234  
THREE CAPABLE ADULTS  
REQUIRED FOR THIS  
PROCEDURE. FAILURE TO  
FOLLOW THIS WARNING  
COULD RESULT IN  
SERIOUS INJURY AND/OR  
PROPERTY DAMAGE.  
26  
1
25  
24  
19  
24  
19  
E
C
YING  
A
PLA  
SURF  
08/06  
ID# M88604C1  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After pole has been secured to the anchor plate (2) loosen nut (26),  
remove cotter pin (9), and pull out pin (8). This will allow the removal  
of the assembly rod (14) which is no longer necessary for the  
remainder of the assembly and installation of system.  
17.  
WARNING!  
ONLY AFTER THE ANCHOR  
PLATE HAS BEEN FULLY  
TIGHTENED: Remove cotter  
pin (9) and pin (8) to remove  
threaded assembly rod  
(14)  
from anchor plate (2).  
26  
24  
15  
14  
9
8
25  
ID# M88604C1  
08/06  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check system leveling. Pole (1)  
should be level in all directions.  
After system is leveled, completely  
tighten all nuts (25).  
18.  
NOTE:  
If adjustment is  
necessary, adjust  
system by rotating  
the nuts (25) between  
anchor plate (2) and  
pole flange.  
1
25  
2
19.  
Apply height adjust ment label (11).  
Adjust system by turning crank until desired height is reached  
per height indicator (30).  
30  
WARNING!  
10 feet  
(3.05 m)  
12  
11  
READ AND UNDERSTAND  
WARNING & HEIGHT  
ADJUSTMENT LABELS  
BEFORE USING THIS UNIT.  
FAILURE TO FOLLOW  
OPERATING INSTRUCTIONS  
COULD RESULT IN INJURY  
OR DAMAGE TO PROPERTY.  
08/06  
ID# M88604C1  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED LIFETIME WARRANTY  
Subject to proper installation and normal use, Spalding®  
warrants, subject to limitations below, to the original retail  
purchaser all structural components of the Spalding®  
system to be free of defects in material and workmanship  
for the duration of ownership by the original retail  
purchaser.  
Merchandise must be shipped prepaid with a copy of proof  
of purchase to our factory for examination to see whether  
it needs to be repaired or replaced. Any labor costs,  
travel expenses and any other charges involved in the  
removal, installation or replacement of the  
defective/repaired parts from/to your Spalding® system  
will be your (the purchaser’s) responsibility. Shipping  
charges for replaced or warranted merchandise being  
sent back to the customer from our factory must be  
prepaid by the customer in advance. If not, the  
replacement shipment will be sent out collect.  
What is Not Covered By This Warranty  
Paint or rusted parts. Paint kits will be available to assist in  
normal maintenance.  
RIM  
HANGING ON THE RIM WILL VOID YOUR WARRANTY.  
Rims are not warranted for any defects other than  
workmanship. Torn back plates, damaged springs, bent  
rings, damaged eye bolts, and torn or distorted rim  
supports result from hanging on the rim and are not  
warranted.  
ID# M88604C1  
08/06  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp All in One Printer AR 5316E User Manual
Snapper Lawn Mower 1691245 User Manual
Sony CD Player 0 CDX 3160 User Manual
Sony CD Player CDP CE500 User Manual
Sony Portable Multimedia Player NWZ W202 User Manual
Sony Power Supply AC E45HG User Manual
Sony Security Camera SNCDH210TW User Manual
Spectra Logic Computer Accessories RXT150 User Manual
Speed Queen Washer Dryer SDE807 User Manual
Stanley Black Decker Tool Storage 36800 User Manual