Sony Video Game Controller CECHZK1UC User Manual

Part names  
Charging the wireless keypad  
Using the wireless keypad with other products  
To charge the wireless keypad battery, check that the PS3™ system is turned on (power indicator  
is lit solid green), and then connect the keypad to the system using a USB cable. While charging  
the battery, the status indicator, the Caps lock indicator and the touch pad indicator will all flash.  
When charging is complete, these indicators will turn off.  
You can pair and use the wireless keypad with other Bluetooth®-compatible products. For details  
on pairing with another product, refer to the instructions supplied with the product. To set the  
keypad to pairing mode, slide the power switch to "ON" while pressing the blue button.  
Continue pressing the blue button until the keypad is set to pairing mode. When the keypad is  
in pairing mode, the status indicator, the Caps lock indicator and the touch pad indicator will all  
flash alternately. If a pass key is requested, enter the numbers specified by the Bluetooth®-  
compatible product or numbers of your choice (four digits or more) if the product does not  
specify a pass key.  
Blue button  
Status indicator  
Orange button  
POWER switch  
Caps lock indicator  
Hints  
The wireless controller is not charged during the process of charging the keypad.  
Directional keys  
Touch pad indicator  
SELECT button*  
The battery has a limited life span. Battery charge duration will gradually decrease with  
repeated usage and age. Battery life also varies depending on the storage method, usage state,  
environment and other factors.  
START button*  
Hints  
The keypad is not guaranteed to work with all Bluetooth®-compatible products and may not  
work properly with some Bluetooth®-compatible products.  
Wireless Keypad  
Clavier sans fil  
PS button*  
*
If the keypad is charged during use, the status indicator will flash. When charging is complete,  
the status indicator will stop flashing.  
These buttons can only be used  
when the keypad is attached to  
a wireless controller.  
A USB cable can be used to pair the keypad and the PS3™ system only.  
When the keypad is paired with another Bluetooth®-compatible product, the pairing with the  
original product will be cleared. To use the keypad with the original product, you will need to  
pair the devices again.  
Entering text  
Instruction Manual / Mode d’emploi  
You can enter text in the same way as with a standard PC keyboard. To enter an uppercase letter,  
first press the Shift key. To enter keypad characters that are colored blue or orange, first press the  
corresponding blue or orange button. To enter an accented letter, first enter the accent and then  
enter the letter.  
CECHZK1UC  
4-124-373-12(1)  
When disposing of the wireless keypad  
USB connector  
When disposing of the wireless keypad, remove the battery and follow local regulations  
regarding disposing of batteries.  
Clamp  
This character is entered when  
the orange button is pressed.  
This character is entered when  
the blue button is pressed.  
US  
WARNING  
Notice  
Other than when disposing of the keypad, never remove the screws and never remove the  
battery from the keypad.  
This equipment complies with FCC/IC radiation exposure limits set forth for uncontrolled equipment  
and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102  
of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are  
deemed to comply without testing of specific absorption ratio (SAR).  
Preparing for use  
Checking the version of the PS3™ system software  
To use the wireless keypad, the PS3™ system software must be version 2.50 or later. You can  
check the system software version by selecting  
"System Information" on the XMB™ screen of the PS3™ system.  
When the Shift key is pressed, uppercase letters  
(instead of lowercase letters) can be entered.  
1
2
Using a crosshead screwdriver, remove the screws from the keypad  
rear (8 places) and carefully remove the casing.  
This transmitter must not be co-located or operated in conjunction with any other antenna or  
transmitter.  
(Settings)  
(System Settings)  
Hint  
NOTE:  
To continue to enter keypad characters colored blue or orange, you must press the orange or  
blue button before each character you enter.  
Unplug the connector, and then remove the battery.  
Pairing the wireless keypad and the PS3™ system  
Before using the wireless keypad, you must first register or "pair" the keypad and the PS3™  
system. You only need to do this the first time you use the keypad.  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC rules.  
Battery  
These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
− Reorient or relocate the receiving antenna.  
− Increase the separation between the equipment and receiver.  
− Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Commonly used keys  
Enters a tab  
1
2
3
Turn on the PS3™ system.  
Orange button +  
Turns on caps lock  
Slide the power switch of the keypad to "ON".  
Confirms characters that have been typed but not  
entered  
Connect the keypad to the PS3™ system using a USB cable.  
The keypad is now paired with the PS3™ system.  
Connector  
Blue button +  
Blue button +  
Inserts a line break  
− Consult the dealer or an experienced radio/TV technician for help.  
You are cautioned that any changes or modifications not expressly approved by the party responsible for  
compliance could void the users authority to operate the equipment.  
USB cable  
Recycling Lithium-Ion Batteries  
Lithium-Ion batteries are recyclable.  
You can help preserve our environment by returning your used rechargeable  
batteries to the collection and recycling location nearest you.  
Moves the cursor left and right  
Moves the cursor up and down  
Inserts a space  
Check that the system is  
turned on (power indicator is  
lit solid green).  
If you have questions about this product, call our technical support line at 1-800-345-7669, or write to:  
Sony Computer Entertainment America  
Consumer Services/Technical Support  
For more information regarding recycling of rechargeable batteries, call toll free  
PO Box 5888, San Mateo, CA 94402-0888 U.S.A  
Displays the message box of the PS3™ system  
Switches to touch pad mode  
Displays the Friends list  
Declaration of Conformity  
Trade Name :  
Model No. :  
SONY  
CECHZK1UC  
Caution  
Do not handle damaged or leaking Lithium-Ion batteries.  
Hint  
Responsible Party : Sony Electronics Inc.  
Address :  
Telephone No. :  
16530 Via Esprillo, San Diego, CA 92127 U.S.A.  
858-942-2230  
A USB cable is not included. Use the USB cable supplied with the PS3™ system or any Type A -  
Mini-B USB cable to connect or charge the keypad.  
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is  
subject to the following two conditions: (1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause  
undesired operation of this device.  
Turning the wireless keypad on and off  
Using touch pad mode  
Slide the power switch to "ON" to place the wireless keypad in standby mode. When you press  
any character key, the status indicator will light up to indicate that the keypad is ready to use. To  
turn off the keypad, slide the power switch to "OFF".  
When in touch pad mode, the wireless keypad can be used like a mouse. You can use touch pad  
mode for cursor control in the browser. Move your finger over the area used as a touch pad.  
When you press the touch pad button, the touch pad indicator will light up and the keypad will  
switch to touch pad mode.  
This Class B digital apparatus complies with Canadian ICES-003.  
Hint  
Warning  
The area that can be  
used as a touch pad  
If the keypad is not used for a period of time (with the power on), it will switch to standby mode  
and the status indicator will turn off.  
If you come into contact with material from a leaking battery, take the following actions:  
– If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek  
medical attention.  
– If the material comes into contact with the skin or clothes, immediately rinse the affected area with  
clean water. Consult your physician if inflammation or soreness develops.  
Avoid prolonged use of this product. Take a break at about 30 minute intervals.  
Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in  
your hands, wrists or arms during use.  
If the condition persists, discontinue use and consult a doctor.  
This product is intended for use with the hands only.  
Do not allow the battery to come into contact with fire or subject it to extreme temperatures such as  
in direct sunlight, in a vehicle exposed to the sun or near a heat source.  
The pointer moves as  
you move your finger.  
Attaching the wireless keypad to a wireless controller  
When using the wireless keypad with the PS3™ system, you must attach it to a wireless controller.  
These keys operate in the  
same way as the left/right  
buttons on a mouse.  
Touch pad button  
Calibrating the wireless keypad for touch pad mode  
Caution  
Before using touch pad mode for the first time, you must calibrate the keypad. To calibrate the  
keypad, switch it to touch pad mode, and then press and hold down the orange and blue buttons  
at the same time for at least two seconds. The calibration is complete when the touch pad  
indicator flashes once. Do not touch the touch pad area or turn off the keypad during  
calibration.  
Be careful not to pinch your fingers with the clamp when attaching/detaching the wireless keypad to/  
from the wireless controller.  
When disposing of the keypad, carefully follow the precautions listed below:  
− When removing the battery, do so in a location out of the reach of small children to help prevent  
accidental swallowing of small parts such as screws.  
− Be careful not to hurt your nails or fingers when removing the battery.  
Open the clamp.  
 ꢀ  
Place the wireless keypad over the wireless controller as shown in the  
diagram, and then press down firmly to attach the keypad to the controller.  
Hint  
You cannot enter text when the keypad is in touch pad mode. To enter text, press the touch pad  
button again.  
Detaching the wireless keypad  
Open the clamp, and then carefully pull up on the wireless keypad.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Pill Reminder Device EK 2020 D User Manual
Shark Vacuum Cleaner EP733W User Manual
Sony Camcorder HXR NX5N User Manual
Sony Computer Accessories MSPSMS11000 User Manual
Sony Portable CD Player CDX M60UI User Manual
Sony Stereo Receiver 3 289 204 423 User Manual
Spin Master Motorized Toy Car Sky Patrol Helicopter User Manual
Stanton CD Player S550 User Manual
Sunpentown Intl Cooktop SR 1851 User Manual
SVAT Electronics Digital Camera GX5400 User Manual