3-858-651-11 (1)
Vid e o Ca sse t t e
Re co rd e r
Operating Instructions
SLV-X717ME/PS/SG
SLV-X817ME/PS/SG
PAL NTSC
PAL NTSC
©1996 by Sony Corporation
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b le o f co n t e n t s
Ge t t in g St a rt e d
4
5
6
8
Step 1: Unpacking
Step 2: Setting up the remote commander
Step 3: Connecting the VCR
Step 4: Tuning your TV to the VCR
10 Step 5: Selecting a language
11 Step 6: Setting the clock
13 Step 7: Tuning the VCR
Ba sic Op e ra t io n s
Ad d it io n a l In fo rm a t io n
18 Playing a tape
38 Troubleshooting
22 Recording TV programmes
40 Specifications
25 Recording TV programmes using
41 Index to parts and controls
the timer
Back cover
Index
Ad d it io n a l Op e ra t io n s
28 Playing/ searching at various
speeds
30 Recording TV programmes using
the quick timer
31 Checking/ changing/ cancelling
timer settings
32 Recording stereo programmes
33 Adjusting the picture
34 Changing menu options
35 Editing with another VCR
37 Audio dubbing
Introduction
3
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
St e p 1
Un p a ckin g
Check that you have received the following items with the VCR:
• Remote commander
• Plug adaptor (SLV-X717ME/ SG and
SLV-X817ME/ SG only)
• R6 (Size AA) batteries
• Aerial cable
Ch e ckin g yo u r m o d e l n a m e
The instructions in this manual are for the 6 models : SLV-X717ME,
X717PS, X717SG, X817ME, X817PS, and X817SG. Check your model
number by looking at the rear panel of your VCR. The SLV-X817ME
is the model used for illustration purposes. Any difference in
operation is clearly indicated in the text, for example, “SLV-X717ME
only.”
4
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 2
Se t t in g u p t h e re m o t e co m m a n d e r
In se rt in g t h e b a t t e rie s
Insert two R6 (size AA) batteries by
matching the + and – on the
batteries to the diagram inside the
battery compartment.
Usin g t h e re m o t e co m m a n d e r
You can use this remote
commander to operate this
Remote sensor
VCR and a Sony TV. Buttons
on the remote commander
marked with a dot (• ) can be
used to operate your Sony TV.
TV / VIDEO
1
2
3
To operate
the VCR
Set TV / VIDEO to
VIDEO and point at the remote sensor on the VCR
TV and point at the remote sensor on the TV
a Sony TV
Notes
•
The TV/ VIDEO button selects an input source of the TV from aerial in or line in.
The button does not control this VCR.
•
•
With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove
the batteries to avoid possible damage from battery leakage.
•
•
Do not use a new battery with an old one.
Do not mix different types of batteries.
5
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 3
Co n n e ct in g t h e VCR
AERIAL IN
AERIAL OUT
Mains
lead
to mains
AERIAL IN
Aerial cable
(supplied)
: Signal flow
1
2
3
Disconnect the aerial input cable from
your TV and connect it to AERIAL IN on
the rear panel of the VCR.
AERIAL
IN
OUT
AERIAL
IN
OUT
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
Connect the mains lead to the mains.
6
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
For SLV-X717
This VCR
Ad d it io n a l co n n e ct io n s
To a TV that has phono type
audio/video input jacks
TV
AUDIO VIDEO
LINE-1 IN
This additional connection
improves picture and sound quality.
Connect the TV as shown on the
right.
LINE OUT
IN
VIDEO
AUDIO
If you want to use the Trinitron TV
Synchro Play function (see page 21),
this connection is necessary. (If your
TV has two or more inputs, connect
the audio/ video cable to the VIDEO
IN 1 jacks.)
Audio/video cable
(not supplied)
For SLV-X817
This VCR
TV
AUDIO VIDEO
LINE-1 IN
LINE OUT
IN
VIDEO
AUDIO
Audio/video cable
(not supplied)
This VCR
Stereo system
To a stereo system (SLV-X817 only)
You can improve sound quality by
connecting a stereo system as
shown below.
AUDIO VIDEO
AUX IN
LINE-1 IN
LINE OUT
Audio cable (not supplied)
7
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 4
Tu n in g yo u r TV t o t h e VCR
If you have connected your VCR to the TV using the audio/ video cable, skip
this step.
ON/STANDBY
PROGRAM +/–
RF CHANNEL
1
2
ON/STANDBY
Press ON/ STANDBY to turn on the VCR.
Press RF CHANNEL on the VCR.
RF
CHANNEL
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
RF
3
4
Turn on your TV and select a programme position for the VCR
picture.
This channel will now be referred to as the video channel.
Press RF CHANNEL.
RF
CHANNEL
The TV system indicator appears in the display window.
PROGRAM
Press PROGRAM +/ – (repeatedly) to select the correct TV system.
If you watch the system B/ G, select “G.” If you watch the system
D/ K, select “K.”
RFG
8
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Tune the TV to the same channel as that
shown in the display window so that
the picture on the right appears on the
TV screen.
SONY VIDEO CASSETTE
RECORDER
Refer to your TV manual for tuning
instructions.
If the picture does not appear clearly,
see “To obtain a clear picture from the
VCR” below.
Press RF CHANNEL.
RF
CHANNEL
You have now tuned your TV to the VCR. From now on, whenever
you want to play a tape, set the TV to the video channel.
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/ – on the VCR. If
the TV screen changes to a different programme each time you press
PROGRAM +/ –, the TV tuning is correct.
To obtain a clear picture from the VCR
If the picture does not appear clearly in step 5 above, go to step 6 to finish
this procedure once. Then start from step 2. After pressing RF CHANNEL
in step 2 to display the RF channel, press PROGRAM +/ – so that another RF
channel appears. Then tune the TV to the new RF channel until a clear
picture appears.
Note
•
If you set the wrong TV system you may have no sound or sound may be distorted.
9
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 5
Se le ct in g a
la n g u a g e
MENU
EXECUTE
CURSOR
> / . / ? / /
You can change the on-screen language
from English to Chinese or Arabic.
Before you start...
1
4
7
2
5
8
3
6
9
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• MENU
1
Press MENU.
MENU
TIMER SET / CHECK
SET UP MENU
TUNER PRESET
CLOCK SET
LANGUAGE /
/
SELECT : [
]
SET
: [ EXECUTE ]
2
Press CURSOR >/ . to move the cursor
(z) to LANGUAGE and press EXECUTE.
LANGUAGE /
• ENGLISH
/
•
CURSOR
• EXECUTE
SELECT
END
:
:
[ V v ]
[ EXECUTE ]
3
Press CURSOR >/ . to flash the desired
language, then press EXECUTE.
LANGUAGE /
/
•
CURSOR
ENGLISH
•
• EXECUTE
:
:
[ V v ]
[ EXECUTE ]
10 Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 6
Se t t in g t h e clo ck
MENU
You must set the time and date on the
VCR to be able to use the timer
recording features properly. You can set
the VCR clock using the on-screen
display.
EXECUTE
CURSOR
> / . / ? / /
1
4
7
2
5
8
3
6
9
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
• MENU
1
Press MENU.
MENU
TIMER SET / CHECK
SET UP MENU
TUNER PRESET
CLOCK SET
LANGUAGE /
/
SELECT : [
]
SET
: [ EXECUTE ]
2
3
Press CURSOR >/ . to move the cursor
(z) to CLOCK SET, then press EXECUTE.
CLOCK SET
1 . 1 . 1997 WED
0 : 00
•
CURSOR
• EXECUTE
SELECT : [
]
]
[
SET
END
:
: [ EXECUTE ]
Press CURSOR >/ . to set the date.
CLOCK SET
25 . 1 . 1997 SAT
0 : 00
•
CURSOR
The day of the week is set automatically.
SELECT : [
]
]
[
SET
END
:
: [ EXECUTE ]
4
Press CURSOR / to flash the month and
set the month using CURSOR >/ ..
CLOCK SET
25 . 12 . 1997 THU
0 : 00
•
CURSOR
SELECT : [
]
]
SET
END
: [
: [ EXECUTE ]
continued
11
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 6 : Se t t in g t h e clo ck (co n t in u e d )
5
6
Set the year, hour and minutes in
sequence, using CURSOR / to flash the
item to be set, and CURSOR >/ . to select
the digits.
CLOCK SET
25 . 12 . 1997 THU 15 : 30
•
CURSOR
SELECT : [
]
]
SET
END
: [
: [ EXECUTE ]
• EXECUTE
Press EXECUTE to start the clock.
Tip
•
To change the digits during setting, press CURSOR ? to return to the item to be
changed, and select the digits using CURSOR >/ ..
Note
The menu disappears automatically if you don’t proceed for more than a few
minutes.
•
12 Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 7
Tu n in g t h e VCR
MENU
First, we recommend that you preset the
receivable channels in your area using
automatic presetting. Then, if some
channels could not be preset
EXECUTE
CURSOR
> / . / ? / /
automatically, you can preset them
manually; if there are any unwanted
channels among the preset ones, you can
disable the channels.
1
4
7
2
5
8
0
3
6
9
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Pre se t t in g a ll re ce iva b le ch a n n e ls a u t o m a t ica lly
• MENU
1
Press MENU.
MENU
TIMER SET / CHECK
SET UP MENU
TUNER PRESET
CLOCK SET
LANGUAGE /
/
SELECT : [
]
SET
: [ EXECUTE ]
2
Press CURSOR >/ . to move the cursor
(z) to TUNER PRESET, then press
EXECUTE.
TUNER PRESET
PROG 1
NORM CATV
1
•
CURSOR
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
• ON
OFF
FINE TUNING
• EXECUTE
SELECT : [
SET : [
]
]
continued
13
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 7 : Tu n in g t h e VCR (co n t in u e d )
3
4
Press CURSOR >/ ./ ?/ / to m ove the
cursor (z) to NORMAL/ CATV, then select
NORM.
TUNER PRESET
PROG 1
NORM CATV
1
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
•
CURSOR
• ON
OFF
To preset CATV channels, select CATV.
FINE TUNING
SELECT : [
SET : [
]
]
Press CURSOR >/ . to move the cursor
(z) to AUTO PRESET, then press
EXECUTE.
TUNER PRESET
PROG 1
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
NORM CATV
•
CURSOR
1
• ON
OFF
FINE TUNING
All receivable channels are preset in
numerical sequence. When no more
receivable channels can be found,
presetting stops and the picture from the
lowest numbered channel is displayed on
the TV screen.
• EXECUTE
PLEASE WAIT
14 Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre se t t in g ch a n n e ls
m a n u a lly
MENU
EXECUTE
CURSOR
> / . / ? / /
1
4
7
2
5
8
0
3
6
9
PROG+/–
• MENU
1
2
Press MENU.
MENU
TIMER SET / CHECK
SET UP MENU
TUNER PRESET
CLOCK SET
LANGUAGE /
/
SELECT : [
SET
]
: [ EXECUTE ]
Press CURSOR >/ . to move the cursor
(z) to TUNER PRESET, then press
EXECUTE.
TUNER PRESET
PROG10
NORM CATV
21
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
•
CURSOR
• ON
OFF
FINE TUNING
• EXECUTE
SELECT : [
SET : [
]
]
3
Press CURSOR >/ ./ ?/ / to m ove the
cursor (z) to NORMAL/ CATV, then select
NORM.
TUNER PRESET
PROG10
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
NORM CATV
•
CURSOR
21
• ON
OFF
To preset CATV channels, select CATV.
FINE TUNING
SELECT : [
SET : [
]
]
continued
15
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 7 : Tu n in g t h e VCR (co n t in u e d )
4
5
Press CURSOR >/ . to move the cursor
(z) to CHANNEL SET.
TUNER PRESET
PROG10
NORM CATV
21
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
•
CURSOR
• ON
OFF
FINE TUNING
SELECT : [
SET : [
]
]
• PROG
Press PROG +/ – to select the programme
position.
Selected programme
position
TUNER PRESET
PROG14
NORM CATV
21
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
• ON
OFF
FINE TUNING
SELECT : [
SET : [
]
]
6
Press CURSOR / repeatedly until the
channel you want is displayed. Pressing
CURSOR ? goes back to the previous
channels.
TUNER PRESET
PROG14
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
NORM CATV
•
CURSOR
35
• ON
OFF
FINE TUNING
The channels are scanned in the following
order:
SELECT : [
SET : [
]
]
Channel coverage
System D/K
System B/G
VHF
R1–R12
R21–R69
—
E2–E12
UHF
E21–E69
CATV (TV distribution)
S1–S41, S01–S05
If you know the number of the channel you want, press the
programme number buttons. For example, for channel 5, first press
“0” and then press “5.”
7
8
To allocate another channel to another programme position, repeat
steps 4 to 6.
• EXECUTE
Press EXECUTE.
16 Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Disa b lin g u n w a n t e d p ro g ra m m e p o sit io n s
After tuning the TV channels, you can disable unused programme positions.
The disabled positions will be skipped later when you press the PROG +/ –
buttons.
1
2
3
Press MENU, then select TUNER PRESET and press EXECUTE.
Select CHANNEL SET.
Press PROG +/ – until the programme position you want to disable
appears beside “PROG” on the TV screen.
4
Press programme number button “0” twice to display the number “0”
beside CHANNEL SET.
5
6
Repeat steps 3 and 4 for other positions you want to disable.
Press EXECUTE.
If t h e p ict u re is n o t cle a r
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
Press PROG +/ – to select the programme position for which you cannot
obtain a clear picture.
2
3
Press MENU, then select TUNER PRESET and press EXECUTE.
Select FINE TUNING. The fine tuning meter appears.
TUNER PRESET
PROG14
NORM CATV
35
Selected programme
position
NORMAL / CATV
AUTO PRESET
CHANNEL SET
AFT
•
• ON
OFF
FINE TUNING
SET
: [
]
4
Press CURSOR ?/ / to get a clearer picture, then press EXECUTE.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Note
•
The menu disappears automatically if you don’t proceed for more than a few
minutes.
17
Getting Started
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Pla yin g a t a p e
6 EJECT
TRINITRON
TV SYNCHRO
PLAY
1
4
7
2
5
8
0
3
6
9
DISPLAY
COUNTER
RESET
SLV-X717
REPLAY
P PAUSE
3/# SEARCH
COUNTER
RESET
COLOR
SYSTEM
·
P LAY
)
F F
p STOP
REW
SLV-X817
0
COUNTER
RESET
COLOR
SYSTEM
1
2
Turn on your TV and set it to the video channel.
Insert a tape.
The VCR turns on and starts playing
automatically if you insert a tape with its
safety tab removed.
18 Basic Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press · PLAY.
PLAY
When the tape reaches the end, it will rewind automatically.
Additional tasks
To
Press
Stop play
p STOP
P PAUSE
Pause play
Resume play after pause P PAUSE or · PLAY
Search forward
) FF or # SEARCH d uring playback
Search backward
Fast-forward the tape
Rewind the tape
Eject the tape
0 REW or 3 SEARCH during playback
) FF d u ring stop
0 REW d u ring stop
6 EJECT
Replaying a recently w atched scene
You can immediately rewind and playback the scene you want to watch
again.
During playback, press REPLAY up to four times. The VCR rewinds the
tape 10 seconds for each press of the button, and restarts playback.
To set the colour system
If streaks appear during playback, press COLOR SYSTEM on the VCR to
conform to the system that the tape was recorded in. (Normally, the color
system is correctly set whenever the tape is inserted.)
If your tape w as
recorded in
Press COLOR SYSTEM until the indication below
appears in the display w indow.
PAL
PAL
NTSC
NTSC
PAL
MESECAM
continued
Basic Operations 19
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Pla yin g a t a p e (co n t in u e d )
To play an NTSC-recorded tape
Set NTSC PB at the rear of the VCR according to the colour system of your
TV.
If your TV is
PAL
Set NTSC PB to
ON PAL TV
NTSC 4.43
NTSC 4.43
NTSC 3.58
NTSC 3.58
To use the time counter
At the point on the tape that you want to find later, press COUNTER RESET.
The counter in the display window resets to “0H00M00S.” Search for the
point afterwards by referring to the counter.
H
M
S
To display the counter on the TV screen, press DISPLAY.
Notes
•
•
•
The counter resets to “0H00M00S” whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
If a tape has portions recorded in both PAL and NTSC systems, the time counter
reading will not be correct. This is due to the difference between the counting
cycles of the two video systems.
•
Depending on your TV, the following may occur while playing an NTSC-recorded
tape:
– the picture is black and white
– the picture shakes
– no picture appears on the TV screen
– black streaks appear horizontally on the TV screen
– the colour density increases or decreases.
20 Basic Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Tu rn in g o n t h e VCR a n d TV, a n d st a rt in g p la yb a ck
a u t o m a t ica lly (Trin it ro n TV Syn ch ro Pla y)
You can only use this function if your TV is made by Sony (Trinitron TV).
How to connect to use this function
Connect the VCR and TV with the audio/ video cable (see “To a TV that has
phono type audio/ video input jacks” on page 7.) Be sure to connect the
audio/ video cable to the VIDEO IN 1 jacks on the TV if the TV has two
inputs or more. The TV must be placed where it will respond to the remote
commander while you are pointing it at the VCR.
Operation
Make sure that the TV’s power is in standby mode.
Press TRINITRON TV SYNCHRO PLAY and hold the remote commander in
place for about two seconds.
The VCR and TV turn on, and the TV is set to VCR reception. If there is a
tape in the VCR, playback starts automatically.
Notes
•
If the Trinitron TV Synchro Play function does not work properly:
– Wait a few moments, and press the button again.
– Replace both of the batteries with new ones, and press the button again.
Note that this function may not operate some Sony TVs because of the remote
commander’s signal limitations.
•
Do not press TRINITRON TV SYNCHRO PLAY while playing back a video tape. If
you do so, the TV’s input source will momentarily switch to the TV’s tuner.
Basic Operations 21
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co rd in g TV
p ro g ra m m e s
1
4
7
2
5
8
0
3
6
9
TAPE SPEED
PROG +/–
r REC
1
2
Turn on your TV and set it to the video channel.
Insert a tape with its safety tab in place.
22 Basic Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
• PROG
3
4
Press PROG +/ – to select the programme position you want to
record.
SP
TAPE
SPEED
Press TAPE SPEED to select the tape speed, SP or LP.
LP provides recording time twice as long as SP, however, SP
produces better picture and audio quality.
LP
REC
5
Press r REC to start recording.
To stop recording
Press p STOP.
To check the remaining tape length
Press DISPLAY during playback or recording. The white bar indicates the
approximate length of tape remaining.
S
E
Remaining tape length
Time counter
0 : 00 : 22
To w atch another TV programme w hile recording
1
If the TV is connected to the VCR using an audio/ video cable, set the
TV to TV input. If the TV is connected to the VCR using only the aerial
cable, skip this step.
2
Select another programme position on the TV.
continued
Basic Operations 23
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co rd in g TV p ro g ra m m e s (co n t in u e d )
To save a recording
To prevent accidental erasure, break off the
safety tab as illustrated. To record on a tape
again, cover the tab hole with adhesive
tape.
Safety tab
To record NTSC colour system programmes
NTSC colour signals can be recorded on this VCR.
For tape speed, select SP or EP in step 4.
EP provides recording time three times as long as SP, however, SP produces
better picture quality.
When playing back, the VCR automatically detects the tape speed.
Tips
•
To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press the ? (ten’s digit) button
followed by the number buttons.
•
•
•
You can select a video source from the LINE-1 IN or LINE-2 IN jacks using INPUT
SELECT.
The display appears on the TV screen indicating information about the tape, but the
information won’t be recorded on the tape.
If you don’t want to watch TV while recording, you can turn off the TV.
Notes
•
•
The display does not appear during still (pause) mode or slow-motion playback.
The display will not appear while playing an NTSC-recorded tape.
24 Basic Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co rd in g TV
p ro g ra m m e s
u sin g t h e t im e r
u
(on/standby)
MENU
EXECUTE
CURSOR
> / . / ? / /
You can preset up to eight programmes
at a time.
INPUT
SELECT
Before you start…
• Check that the VCR clock is set to the
correct time.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
1
4
7
2
5
8
0
3
6
9
• Turn on your TV and set it to the
video channel.
• MENU
1
Press MENU and select TIMER SET/
CHECK, then press EXECUTE.
TIMER SET / CHECK 25 . 12 TH
DATE
–– . –
–– . –
–– . –
–– . –
–– . –
–– . –
–– . –
–– . –
START
– : ––
– : ––
– : ––
– : ––
– : ––
– : ––
– : ––
– : ––
STOP PROG
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
–
–
–
–
–
–
–
–
•
CURSOR
• EXECUTE
continued
Basic Operations 25
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co rd in g TV p ro g ra m m e s u sin g t h e t im e r (co n t in u e d )
2
Set the date, start and stop times,
programme position, and tape speed:
TIMER SET / CHECK 25 . 12 TH
DATE
25 . 12 TH
–– . –
–– . –
–– . –
–– . –
–– . –
–– . –
–– . –
START
– : ––
– : ––
– : ––
– : ––
– : ––
– : ––
– : ––
– : ––
STOP PROG
– : –– –– SP
•
CURSOR
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
–
–
–
–
–
–
–
1 Press CURSOR / to flash each item in
turn.
2 Press CURSOR >/ . to set each item.
To correct a setting, press CURSOR ? to
return to that setting and reset.
To record the same programme every day or the same day every
week, press CURSOR . while the date is flashing. For details, see
“Daily/ weekly recording” on page 27.
To record from a source connected to the LINE-1 IN or LINE-2 IN
jacks, press INPUT SELECT to display “L1” or “L2” in the “PROG”
position.
3
Press CURSOR / to confirm the setting.
•
CURSOR
The cursor (z) appears at the beginning of the line. To enter another
setting, move the cursor to the next line and repeat step 2.
• EXECUTE
4
5
Press EXECUTE.
•
Press u to turn off the VCR.
The TIMER indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
To stop recording
To stop the VCR while recording, press p STOP.
26 Basic Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press u. The TIMER
indicator turns off and the VCR switches on. Remember to press u to reset
the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV program.
Daily/w eekly recording
In step 2 above, press CURSOR . to select the recording pattern. Each time
you press CURSOR ., the indication changes as shown below. Press
CURSOR > to change the indication in reverse order.
the current date n SU-SA n MO-SA n MO-FR n EVERY SA .....
n EVERY MO n EVERY SU n 1 month later n (dates count dow n)
n the current date
Tips
•
To set the programme position, you can also use the PROG +/ – or programme
number buttons.
•
•
To set the tape speed, you can also use TAPE SPEED.
To record NTSC signals, set the tape speed to SP or EP. To set the EP mode, display
“LP” in the tape speed position.
Note
• “TIMER” flashes in the display window when you press u with no tape inserted.
Basic Operations 27
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operations
Pla yin g /se a rch in g
a t va rio u s sp e e d s
1
4
7
2
5
8
0
3
6
9
SLV-X717
0
REW
)
F F
·
P LA Y
& SLOW
FRAM E
7
3 / #
SEARCH
·
P LA Y
SLV-X817
)
F F
·
P LA Y
) # F F
0 3 R E W
0
REW
Playback options
Operation
Du ring stop , p ress ) FF or 0 REW.
Fast-forward/ rewind
View the picture during fast- During fast-forward, hold ) FF down. During rewind, hold
forward or rewind
0 REW d ow n .
Play at high speed
During playback or pause, press # SEARCH or 3 SEARCH. To
change direction, press the other one.
Play in slow motion
Play frame by frame
During playback or pause, press & SLOW.
During pause, press 7 FRAME. Hold the button down to play
one frame each second.
Rewind and start play
During stop, hold 0 REW down on the VCR, and press
· PLAY on the VCR.
To resume normal playback
Press · PLAY.
28 Additional Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e CLICK SHUTTLE
rin g (SLV-X717 o n ly)
CLICK SHUTTLE ring
With the CLICK SHUTTLE ring,
you can operate a variety of
playback options.
During playback or pause, turn the
CLICK SHUTTLE ring clockwise or
anticlockwise. Each change in the
CLICK SHUTTLE ring position changes the playback mode, and the
corresponding mark appears on the TV screen for a few seconds in the
following way if the on-screen display function is on:
Normal speed
Slow motion
Double speed
High speed
Playback mode
X 2
Mark on the TV
screen
pause
Slow motion in
reverse
High speed in
reverse
Double speed in
reverse
Normal speed in
reverse
– X 2
– X 1
Tip
•
Adjust the picture using TRACKING +/ – on the VCR if:
– streaks appear while playing in slow motion
– bands appear at the top or bottom while pausing
– the picture shakes while pausing.
Notes
•
•
•
The playback sound is muted during these operations.
In LP mode, noise may appear or there may be no colour.
If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.
Additional Operations 29
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co rd in g TV
p ro g ra m m e s
u sin g t h e q u ick
t im e r
After starting recording in the normal
way, you can have the VCR stop
recording automatically after a specified
duration.
1
4
7
2
5
8
0
3
6
9
QUICK
TIMER
1
2
While recording, press QUICK TIMER once.
Press QUICK TIMER repeatedly to set the duration.
Each press advances the time in increments of 30 minutes.
0:00
0:30
1:00
10:30
11:00
The duration decreases minute by minute to 0:00, then the VCR stops
recording and turns off automatically.
To extend the duration
Press QUICK TIMER repeatedly to set to the new duration.
To stop recording
To stop the VCR while recording, press p STOP.
Tip
•
You can also set the quick timer and start recording during the stop mode.
30 Additional Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch e ckin g /
ch a n g in g /
ca n ce llin g t im e r
se t t in g s
u
(on/standby)
MENU
EXECUTE
CURSOR
> / . / ? / /
Before you start…
• Turn on your TV and set it to the
video channel.
1
4
7
2
5
8
0
3
6
9
TIMER CLEAR
1
2
Press u to turn on the VCR.
Press MENU and select TIMER SET/ CHECK:
TIMER SET / CHECK 25 . 12 TH
DATE
START
STOP PROG
8 : 00
0 : 00 50 LP
0 : 12 13 : 00 27 LP
EVERY SU 23 : 00 0 : 00 L2 SP
6 . 1 TU
7 : 00
6
SP
• If you want to change a setting, go on to the
next step.
8 . 1 TH 21 : 00
MO SA
–
–– . –
–– . –
–– . –
–– . –
– : ––
– : ––
– : ––
– : ––
– : –– ––
– : –– ––
– : –– ––
– : –– ––
–
–
–
–
• If you do not need to change the settings,
press EXECUTE, then turn off the VCR to
return to recording standby.
3
4
Press CURSOR >/ . to select the setting you want to change or cancel:
• To change the setting, press CURSOR ?/ / to flash the item you
want to change, and press CURSOR >/ . to reset it. Then, press
CURSOR / repeatedly until the cursor (z) appears at the beginning
of the line.
• To cancel the setting, press TIMER CLEAR.
Press EXECUTE.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
Programme 1
20 seconds
Programme 2
Will be cut off
Programme 1
20 seconds w ill be cut off
Programme 2
Additional Operations 31
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Re co rd in g st e re o p ro g ra m m e s
(SLV-X817 o n ly)
The VCR can only record stereo and bilingual programmes through the line
input. When stereo or bilingual sound is input through the line input,
“STEREO” appears on the screen and in the display window. You cannot
select the sound to listen.
Se le ct in g t h e so u n d d u rin g p la yb a ck
Press AUDIO MONITOR to select the sound you want.
To listen to
On-screen display
Display w indow
Stereo/ main and sub
STEREO
STEREO
(left and right channels)
LCH
Left channel/ main
Right channel/ sub
Standard sound*
STEREO
RCH
STEREO
No indicator
No indicator
* The mixed sound of left and right channels (monaural)
Ho w so u n d is re co rd e d o n a vid e o t a p e
The VCR records sound onto two separate tracks. Hi-fi audio is recorded
onto the main track along with the picture. Monaural sound is recorded
onto the normal audio track along the edge of the tape.
Stereo
Mixed left/right
Bilingual
Mixed left/right
channels
channels
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound (left/
right channels)
Main (left channel)
Sub (right channel)
Notes
•
•
To listen to playback sounds in stereo, you must use the AUDIO OUT connections.
When you play a tape recorded in monaural, the sound is heard in monaural
regardless of the AUDIO MONITOR setting.
•
If the AUDIO MONITOR button does not function, check that AUDIO MIX in the
SET UP MENU is set to OFF. For details, see page 34.
32 Additional Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e p ict u re
Ad ju st in g t h e t ra ckin g
Although the VCR automatically adjusts the tracking when playing a tape
(the tracking indicator
flashes in the display window, then goes off),
distortion may occur if the tape was recorded in poor condition. If so,
manually adjust the tracking.
Press the TRACKING +/ – buttons on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two buttons (The
indicator lights up.) To resume automatic
NORMAL TRACKING
tracking adjustment, eject the tape and restart it.
Tracking meter
Ab o u t Ad a p t ive Pict u re Co n t ro l
(APC)
Adaptive Picture Control (APC) automatically
SET UP MENU
improves recording and playback quality by
AUDIO MIX
APC
ON • OFF
• ON OFF
adjusting the VCR to the condition of the video
heads and tape. To maintain better picture quality,
we recommend that you set APC to ON in the SET
UP MENU (with the APC indicator in the display
window lit).
SELECT : [
]
]
SET
: [
APC playback
The APC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with APC.
APC recording
Whenever you insert a tape and first start recording, the VCR adjusts to the
tape using the APC function (the APC indicator flashes rapidly). This
adjustment is retained until the tape is ejected.
To deactivate the APC
Press MENU and select SET UP MENU, then set APC to OFF. The APC
indicator in the display window goes off.
Note
•
There is a delay of a few seconds before the VCR actually starts recording while the
VCR analyses the tape. To avoid the delay, first set the VCR to recording pause (the
APC indicator flashes slowly) and press r REC to have the VCR analyse the tape
(the APC indicator flashes rapidly). After the APC indicator stops flashing, press
P PAUSE to start recording immediately. If you want to start recording quickly
without using the APC function, first set the VCR to recording pause (the APC
indicator flashes slowly) and press P PAUSE to start recording.
Additional Operations 33
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g m e n u o p t io n s
1
Press MENU, then select SET UP MENU.
SET UP MENU
AUDIO MIX
APC
ON • OFF
• ON OFF
SELECT
SET
:
:
[ V v ]
[ Bb ]
2
3
Press CURSOR >/ . to select the option to
change, then press CURSOR ?/ / to
change the setting.
Press EXECUTE to return to the original
screen.
Menu choices
Initial settings are indicated in bold print.
Menu option Set this option to
AUDIO MIX
(SLV-X817 only) The AUDIO MONITOR button will not function.
OFF to listen to hi-fi and normal audio tracks separately. Select the
ON to listen to the hi-fi and normal audio tracks at the same time.
sound using the AUDIO MONITOR button.
ON to switch on the APC (Adaptive Picture Control) function and
APC
improve picture quality, OFF to switch off APC.
34 Additional Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ed it in g w it h a n o t h e r VCR
Ho w t o co n n e ct t o re co rd o n t h is VCR
This VCR (Recorder)
TV
LINE-2 IN
Other VCR (Player)
LINE OUT
VMC-810MS audio/video cable (not supplied)
: Signal flow
Notes
•
(SLV-X717 only)
Use commercially available connecting cable like the Sony VMC-710M/ 720M.
If the other VCR has the AUDIO L and R jacks, use a connecting cable like the Sony
VMC-910MS.
•
•
Make sure you connect the plugs to jacks of the same colour.
If the other VCR is a monaural type, connect the audio plug to the AUDIO L (white)
jack. The sound is recorded on both right and left channels. When connecting to
the AUDIO R (red) jack, the sound is recorded only on the right channel.
If you connected this VCR to both the LINE IN and LINE OUT jacks of the other
VCR, select the input correctly to prevent a humming noise.
•
•
You can also use the LINE-1 IN jacks instead.
continued
Additional Operations 35
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ed it in g w it h a n o t h e r VCR (co n t in u e d )
Op e ra t io n
P PAUSE
(w h e n re co rd in g o n t h is VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display “L2”
in the display window.
r REC
• Press TAPE SPEED to select the tape speed (SP or LP for the PAL
system, and SP or EP for the NTSC system).
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
3
4
Press r REC on this VCR and set it to recording pause.
To start editing, press the P PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the p STOP buttons on both VCRs.
Tips
•
•
To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.
To cut out unwanted scenes while editing, press P PAUSE on this VCR when an
unwanted scene begins. When it ends, press P PAUSE again to resume recording.
Note
If you start recording following the procedure above, the VCR won’t start recording
•
with the APC function. To record a tape with the APC function, press r REC again
during recording pause in step 3 so that the VCR analyses the tape. Then when you
start recording in step 4, press P PAUSE after the APC indicator stops flashing. If
you press P PAUSE before the APC indicator stops flashing, the APC function is
cancelled.
36 Additional Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Au d io d u b b in g
AUDIO
DUB
You can replace the original sound with
the desired one later. Connection is the
same as that in “Editing with another
VCR” on page 35.
1
4
7
2
5
8
0
3
6
9
COUNTER
RESET
For SLV-X817
The monaural sound previously recorded
is replaced while the original hi-fi sound
remains unchanged. Use this feature to
add commentary to a tape that you have
recorded with a camcorder.
Before you start dubbing
• Turn on your TV and set it to the video
channel.
P PAUSE
• Press INPUT SELECT to display “L2” in
the display window.
1
2
Insert a source tape into the playback VCR or the stereo system. Search
for the point to start playback and set it to playback pause.
Insert a prerecorded tape into this (recording) VCR. Search for the end
of the scene to be replaced and press P PAUSE.
Make sure that the tape has its safety tab in place.
3
4
Press COUNTER RESET on this VCR to reset the counter to
“0H00M00S.”
Rewind the prerecorded tape to the beginning of the scene to be
replaced.
The VCR pauses.
5
6
Press AUDIO DUB.
The audio dubbing indicator
appears in the display window.
To start dubbing, press the P PAUSE buttons on this VCR and the other
VCR (or stereo system) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops
automatically.
To stop w hile editing
Press the p STOP buttons on this VCR and the other VCR (or stereo system).
To listen to both the hi-fi and normal audio (SLV-X817 only)
Set AUDIO MIX to ON in the SET UP MENU (page 34). Use this feature to
listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button dose not function. Remember to
reset AUDIO MIX to OFF after playing the tape.
Additional Operations 37
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Tro u b le sh o o t in g
If you have any questions or problems not covered below, please consult your
nearest Sony service facility.
Symptom
Remedy
The ON/ STANDBY switch
does not function.
•
Connect the mains lead to mains securely.
The power is turned on but the
VCR does not operate.
•
Moisture condensation occurs. Turn the power off,
unplug the mains lead, and leave the VCR to dry for
over an hour.
•
•
The clock stops if the VCR is disconnected from the
mains for more than an hour. Reset the clock (and
timer).
The clock has stopped and
“–:– –” lights in the display
window.
The playback picture does not
appear on the TV screen.
Make sure the TV is set to the video channel. If you
are using a monitor, set it to video input.
The picture is not clear.
•
•
Adjust the tracking with the TRACKING +/ – buttons.
Make sure the colour system is correctly set to the
system that the tape was recorded in.
•
The video heads are dirty (see below). Clean the video
heads using the Sony V-25CL video head cleaning
cassette. If this cleaning cassette is not available in
your area, have the heads cleaned at your nearest Sony
service facility (a standard service charge will be
required). Do not use a commercially available wet-
type cleaning cassette, as it may damage the video
heads.
•
•
The video heads may have to be replaced. Consult
your local Sony service facility for more information.
The picture rolls vertically
during picture search.
Adjust the vertical hold control on the TV or monitor.
The picture has no sound.
•
•
The tape is defective. Use a new tape.
The sound is unstable or has an
echo.
When you play a tape with the same sound recorded
on both the hi-fi and normal sound tracks, make sure
the AUDIO MIX option in the SET UP MENU is set to
OFF. (SLV-X817 only)
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & w hite
screen appears)
terminal
initial
38
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
No TV programmes appear
on the TV screen.
•
Make sure the TV is set to the video channel. If you
are using a monitor, set it to video input.
TV reception is poor.
•
•
Adjust the TV aerial.
Make sure the TV system is correctly set for your TV.
The tape starts playing as soon
as it is inserted.
•
The safety tab has been removed. To record on this
tape, cover the tab hole.
•
Check that the safety tab has not been removed.
The tape is ejected when you
press r REC.
•
•
Make sure the tape is not at its end.
Nothing happens when you
press r REC.
Select the correct source with the INPUT SELECT
buttons. Select a programme position when recording
TV programmes; select “L1” or “L2”when recording
from other equipment.
•
•
•
•
•
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a programme has been set for timer
recording.
The timer does not operate.
•
•
Make sure your timer settings have not already passed
the current time.
The clock stops if the VCR is disconnected from the
mains for more than an hour. Reset the clock and
timer.
No tape can be inserted.
•
Check that a tape isn’t already in the tape
compartment.
•
•
•
Make sure you are pointing the remote commander at
the remote sensor on the VCR.
Replace all the batteries in the remote commander with
new ones if they are weak.
Make sure the TV / VIDEO remote control switch is
set correctly.
The remote commander does
not function.
The tracking indicator does not
appear on the screen.
•
•
The recording condition of the tape is very poor and
tracking cannot be adjusted, or the NTSC system is
being used.
Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.
The VCR needs to be cleaned.
39
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Sp e cifica t io n s
Syst e m
Su p p lie d a cce sso rie s
Channel coverage
Remote commander (1)
R6 (Size AA) batteries (2)
Aerial cable (1)
Plug adaptor (1) (SLV-X717ME/ SG and SLV-
X817ME/ SG only)
VHF R1 to R12, E2 to E12
UHF E21 to E69, R21 to R69
CATV S01 to S05, S1 to S41
RF output signal
UHF channels 21 to 69
Aerial out
Design and specifications are subject to change
without notice.
75-ohm asymmetrical aerial socket
In p u t s a n d o u t p u t s
LINE-1 IN and LINE-2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO IN,
phono jack (1 each) (SLV-X717)
phono jack (2 each) (SLV-X817)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms,
unbalanced, sync negative
AUDIO OUT,
phono jack (1) (SLV-X717)
phono jack (2) (SLV-X817)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Ge n e ra l
Power requirements
110 – 240 V AC, 50/ 60 Hz
Power consumption
19 W
Operating temperature
5°C to 40°C
Storage temperature
–20°C to 60°C
Dimensions
Approx. 430 x 109 x 308 mm (w/ h/ d)
including projecting parts and controls
Mass
Approx. 4.5 kg
40
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x t o p a rt s a n d co n t ro ls
Refer to the pages indicated in parentheses ( ) for details.
Fro n t p a n e l (SLV-X717)
1
2
3
ON/ STANDBY switch/ indicator (8)
Tape compartment
0
p STOP button (19, 23)
! ¡ P PAUSE button (19, 36)
!™ RF CHANNEL button (8)
! £ COLOR SYSTEM button (19)
! ¢ TAPE SPEED button (23)
PROGRAM/ TRACKING +/ –
buttons (8, 33)
4
5
6
7
8
9
6 EJECT button (19)
0 REW button (19, 28)
) FF bu tton (19)
!
INPUT SELECT button (24, 26)
! § LINE-2 IN AUDIO/ VIDEO jacks
(35)
CLICK SHUTTLE ring (29)
· PLAY button (19, 28)
r REC button (23)
! ¶ COUNTER RESET button (20)
! • Remote sensor (5)
continued
41
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x t o p a rt s a n d co n t ro ls (co n t in u e d )
Fro n t p a n e l (SLV-X817)
1
2
3
ON/ STANDBY switch/ indicator (8)
Tape compartment
0
P PAUSE button (19, 36)
! ¡ RF CHANNEL button (8)
!™ COLOR SYSTEM button (19)
! £ TAPE SPEED button (23)
! ¢ INPUT SELECT button (24, 26)
PROGRAM/ TRACKING +/ –
buttons (8, 33)
4
5
6
7
8
9
6 EJECT button (19)
03 REW bu tton (19, 28)
· PLAY button (19, 28)
FF #) bu tton (19)
r REC button (23)
!
LINE-2 IN AUDIO L/ R/ VIDEO
jacks (35)
! § COUNTER RESET button (20)
! ¶ Remote sensor (5)
p STOP button (19, 23)
42
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
Disp la y w in d o w
APC
PALNTSC
M
RFGK
STEREO
SP
EP
LP
H
S
1
2
3
4
TIMER indicator (26)
8
9
0
RF indicator (8)
REC (Recording) indicator
Tape speed indicators (23)
APC indicator (33)
TV system indicator (8)
Line/ programme position indicator
(8, 23)
! ¡ Time counter/ clock (20)
5
6
(Tracking) indicator (33)
!™ Tape indicator
Colour system indicators (19)
(Audio dubbing) indicator (37)
! £ STEREO indicator (SLV-X817 only)
(32)
7
Re a r p a n e l
4
5
6
AERIAL OUT connector (6)
NTSC PB switch (20)
1
2
Mains lead (6)
LINE-1 IN AUDIO L/ R/ VIDEO
jacks (SLV-X817 only) (35)
LINE OUT AUDIO L/ R/ VIDEO
jacks (SLV-X817 only) (7)
LINE-1 IN AUDIO/ VIDEO jacks
(SLV-X717 only) (35)
LINE OUT AUDIO/ VIDEO jacks
(SLV-X717 only) (7)
3
AERIAL IN connector (6)
continued
43
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x t o p a rt s a n d co n t ro ls (co n t in u e d )
Re m o t e co m m a n d e r
1
TV / VIDEO remote control switch
(5)
2
3
6 EJECT button (19)
Menu operation buttons (10)
MENU button
CU RSO R >/ ./ ?/ / b u tton s
EXECUTE button
4
AUDIO DUB button (37)
1
4
7
2
5
8
0
3
6
9
5
TRINITRON TV SYNCHRO PLAY
button (21)
6
7
8
9
DISPLAY button (20, 23)
COUNTER RESET button (20)
TIMER CLEAR button (31)
QUICK TIMER button (30)
! º TAPE SPEED button (23)
! ¡ r REC button (23)
!™ & SLOW button (28)
! £ 7 FRAME button (28)
! ¢ REPLAY button (19)
44
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
!
u (on/ standby) switch (8, 26)
! § AUDIO MONITOR button (32)
(This button doesn’t work for SLV-
X717)
! ¶ TV/ VIDEO button (for TV) (5)
! • INPUT SELECT button (24, 26)
! ª Program m e nu m ber/ ? (ten’s
digit) buttons (24)
1
4
7
2
5
8
0
3
6
9
@º PROG +/ – buttons (16, 23)
@¡ VOL +/ – buttons (for TV)
@™ P PAUSE button (19)
@£ 3/# SEARCH buttons (19, 28)
@¢ · PLAY bu tton (19)
@ ) FF bu tton (19, 28)
@§ p STOP button (19, 23)
@¶ 0 REW button (19, 28)
45
Additional Information
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
A, B
Accessories supplied
H, I, J, K
Hi-fi audio track 32
S
4
Safety tab 24
Adjusting
Searching at various
speeds 28
SP mode 23
picture 17, 29, 33
tracking 29, 33
L
Language selection 10
Aerial hookup
6
LP mode 23
T, U, V, W, X, Y, Z
AFT (Auto Fine Tuning) 17
Timer recording 25
APC (Adaptive Picture
Control) 33
Audio dubbing 37
M
cancelling timer
settings 31
Monitoring during
playback 32
AV connection
7
changing timer
settings 31
checking timer
settings 31
N, O
Normal audio track 32
NTSC-recorded tapes 20
C
Cancelling timer settings 31
daily/ weekly
recording 27
Changing timer settings 31
Cleaning the video
heads 38
P
overlapping timer
recordings 31
Picture adjustment. See
Adjusting
Playback 18
Clock setting 11
Colour system
Tracking adjustment. See
Adjusting
compatible colour
Trinitron TV synchro
play 21
at various speeds 28
frame-by-frame 28
slow motion 28
systems
setting 19
Connecting
2
Tuning the VCR 13
Tuning your TV to the VCR
8
Presetting channels 13
the VCR and your TV
6
to a TV with audio/
TV system
8
Q
video jacks
7
Quick timer 30
Counter 20
R
D
Recording 22
Disabling programme
position 17
saving 24
Dubbing. See Editing
while watching another
programme 23
Remote commander
5
E, F, G
Editing 35
EP mode 24, 27, 36
Sony Corporation
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
|