Sony Universal Remote RCP D50 D51 User Manual

3-776-792-12(1)

Remote Control

Panel

Operating Instructions

Before operating the unit, please read this manual

thoroughly and retain it for future reference.

RCP-D50/D51

 2004 by Sony Corporation

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Overview ............................................................................4

Features ............................................................................... 4

Locations and Functions of Parts ...................................5

Operation Panel ................................................................... 5

Connector Panel ................................................................ 13

Mounting on a Console ..................................................14

Menu Configuration and Basic Menu Operations........ 15

Basic Operating Procedure ................................................ 15

Basic Configuration of Menu Display .............................. 16

Menu Items with the DXC-D50-Series Cameras .............. 20

Menu Items with the DXC-D30/D35-Series Cameras ...... 27

Menu Items with the DXC-637-Series Cameras ............... 34

Menu Items with the CCU-TX50 ...................................... 38

Initial Settings..................................................................45

Setting the Operating Conditions of the RCP-D50/D51 ... 45

Setting the Built-in Clock.................................................. 45

Adjusting the Buzzer Sound.............................................. 46

Adjusting the Brightness of the LEDs............................... 47

Changing the Functions of the Rotary Encoders............... 47

Adjusting the Brightness/Contrast of the LCD ................. 48

Assigning a Function to the ASSIGN Button.................... 48

Specifying the Security Codes .......................................... 49

File Operations ................................................................51

Operating Scene Files........................................................ 53

Transferring Scene Files between the Camera and

a Memory Stick (with the DXC-D50 Series) ............... 54

Operating Setup Files (for DXC-D30/D35 Series only) ... 55

Skin Detail Correction/Skin Matrix Adjustment

(for DXC-D30/D35/D50 Series Only) .....................56

Multi-Camera Control......................................................57

Connections and Preparatons ............................................ 57

Adjusting the Iris/Master Black of Multiple Cameras

at One Time .................................................................. 57

Data Transfer Among Multiple Cameras .......................... 57

Operating Multiple Cameras from One RCP Unit —

Command Link............................................................. 58

Memory Sticks.................................................................59

Using a Memory Stick....................................................... 59

Notes on Memory Stick..................................................... 59

Specifications..................................................................61

Download from Www.Somanuals.com. All Manuals Search And Download.

Overview

The RCP-D50/D51 Remote Control Panel enables

remote operation of the DXC-D50-series, DXC-D30/

D35-series,or DXC-637-series Color Video Cameras.

Confirmation of camera conditions and

operation status

This unit’s LCD panel indicates camera conditions

such as the optical filter position, value, and lens

extender setting. The results of the camera’s self-

diagnosis tests are also displayed on the LCD panel.

The RCP-D50 and RCP-D51 are completely identical

in their functions except with respect to the iris and

master black adjustments.

For the iris and master black adjustments, the RCP-

D50 uses a joystick type control while the RCP-D51

uses rotary knobs.

Signal transmission via a digital line

Between this remote control panel and the camera

control unit, signals are digitally transmitted via a

single connection cable (CCA-7), ensuring a reliable

signal. Operating power is also supplied via the cable.

Features

Optimal control parts arrangement for

basic camera operation

Memory Stick slot

Various data, including scene files, can be stored on a

Memory Stick and reproduced at any time.

This remote control panel is provided with essential

control functions for basic operation of a camera.

The buttons, knobs, and other controls have been

arranged according to their functions and with

consideration to their frequency of use. Indicators and

buttons light or flash to indicate the status of the

system operation. Also, guard frames are provided to

protect against accidental use of those buttons vital to

camera operation. These features ensure easy and

error-free use of this remote control panel.

Touch panel with 3¹/2-inch LCD for various

operations

The control panel has a touch panel that permits

various items to be selected and adjusted on the LCD

in menu format. (The menu items differ among the

cameras to be connected.)

Full control of shooting operations

Video display function

Besides controlling camera adjustments and settings,

this unit can control tripod operations (pan and tilt) and

lens settings (focus and zoom).

The LCD can also display pictures from the connected

camera, permitting you to use it as a convenient video

monitor.

Scene file

Four units mountable on a 19-inch rack

The unit provides memory to hold data on shooting

conditions for 20 different scenes, to enable easy

readjustment of the camera for any memorized scenes.

(When a DXC-D50-series camera is connected, data

are held in memory of the camera.)

Up to four units of this control panel can be mounted

in a line on a 19-inch EIA standard rack.

Coordination of settings among several

cameras

In a system that includes several cameras that are

connected via CCUs, connecting the CCUs allows this

unit to set up all of the cameras into the same color

condition.

Download from Www.Somanuals.com. All Manuals Search And Download.

Locations and Functions of Parts

Operation Panel

1 MASTER and SLAVE buttons

qa ASSIGN button

qs Power and output select buttons

MASTER SLAVE ASSIGN

CAM PW

AUTO SETUP

BARS

2 PREVIEW button

qd AUTO SETUP buttons

3 STANDARD button

SKIN DTL LEVEL START

SET UP

PREVIEW

STANDARD

WHITE BLACK

qf White balance control buttons

4 Camera/CCU function

5600K

AUTO

KNEE

SKIN

DETAIL PRESET

GATE

DETAIL

WHITE

ON/OFF buttons

PAINT1 PAINT2 PAINT3 SCENE OTHERS FUNCTION MONITOR

Menu operation block (page 9)

MONITOR

BRIGHT

CONTRAST

qg MASTER GAMMA knob

qh DETAIL knob

5 WHITE knobs

MASTER

GAMMA

DETAIL

WHITE

6 BLACK/FLARE knobs and

indicator

qj MEMORY STICK slot and

access lamp

BLACK/FLARE

EXT

7 Camera number/tally indication

window

IRIS/M.BLACK

ACTIVE

OPEN

IRIS/M.BLACK

LINK

MASTER

BLACK

SENS

AUTO

Iris/master black control block

(page 10)

RELATIVE

COARSE

OPEN

8 ALARM indicator

ALARM

CALL

9 CALL button

PANEL

ACTIVE

0 PANEL ACTIVE button

IRIS

REMOTE CONTROL PANEL

RCP-D50

BLACK/FLARE

7 Camera number/tally indication

EXT

window

MASTER

BLACK

RELATIVE

IRIS/

M.BLACK

LINK

SENS

OPEN

COARSE

AUTO

Iris/master black control block

(page 12)

IRIS/M.BLACK

ACTIVE

8 ALARM indicator

ALARM

CALL

9 CALL button

PANEL

ACTIVE

0 PANEL ACTIVE button

IRIS

REMOTE CONTROL PANEL

RCP-D51

Download from Www.Somanuals.com. All Manuals Search And Download.

Locations and Functions of Parts

1 MASTER and SLAVE buttons

5 WHITE (white balance manual adjustment)

knobs

Used to manually adjust the white balance.

The left knob is for the R signal and the right knob for

the B signal.

When adjusting the white balance of multiple cameras

in Master/Slave mode, designate the master camera or

the slave cameras. Press and light up the MASTER

button to specify the connected camera for the master.

Press and light up the SLAVE button to specify the

connected camera for the slave. The slave cameras

follow the master camera settings.

6 BLACK/FLARE (black balance/flare balance

manual adjustment) knobs and indicator

Used to manually adjust the black balance (when the

indicator is not lit) or the flare balance (when the

indicator is lit).

If you press a button when lit, it goes dark.

2 PREVIEW button

Press this button to control an external device

connected to the EXT I/O connector on the connector

panel.

For the operational specifications, see “3 EXT I/O

(external input/output) connector (9-pin)” in “Connector

Panel” on page 13.

From the left, the knobs are for R, G, and B signal

adjustment.

Selection between black balance and flare balance is

made using the OTHERS menu.

See “Changing the Functions of the Rotary Encoders” on

page 47.

3 STANDARD button

7 Camera number/tally indication window

The number of the camera being controlled from this

panel is displayed in orange.

When a red tally signal is sent to the camera, the

number is displayed in black and the background of

the number lights in red.

When you press this button, the video camera is

initialized to its standard state and the button lights for

several seconds.

If you press the button while it lights, the video camera

retrieves the state before the button was lit.

When a green tally signal is sent to the camera, the

number is displayed in black and the background of

the number lights in green.

When both the red and green tally signals are

simultaneously sent, the left half of the background

lights in red and the right half lights in green.

4 Camera/CCU function ON/OFF buttons

Various functions of the video camera or the CCU can

be turned on and off from this panel.

8 ALARM indicator

5600K

AUTO

KNEE

SKIN

DETAIL

GATE

Lights when trouble occurs in the camera system and

the self-diagnostic function activates at the video

camera or the CCU.

5600K (valid only with the DXC-D50 series):

5600K electric color temperature conversion

function

9 CALL button

When the camera is connected via a CCU, press to

send a call signal to the video camera, on which the

CALL button lights. The tally lamps on the camera

and the red tally lamp on the CCU light when not lit,

or go dark when lit.

When the CALL button on the video camera is

pressed, the CALL button on this panel lights and a

buzzer sounds.

AUTO KNEE: Auto knee function. When this button

is lit (ON), the knee point is automatically adjusted

according to the light content of the picture.

SKIN DETAIL: Skin detail function

DETAIL GATE: Skin detail gate function. When

this button is lit (ON), the adjustment range of the

skin tone detail is displayed in white on the

monitor screen.

For details on the Skin detail and Skin detail gate, see “Skin

Detail Correction/Skin Matrix Adjustment (for DXC-D30/

D35/D50-Series Only)” on page 56.

Download from Www.Somanuals.com. All Manuals Search And Download.

0 PANEL ACTIVE button

C CLOSE button

Press and light up the button to permit this panel to

control the camera system (Panel active status).

The IRIS/M.BLACK ACTIVE button of the iris/

master black control block also lights.

If you press this button so that it goes dark, the panel

will be locked, preventing accidental misoperation.

If Panel Active Lock with a security code has been

enabled, the PANEL ACTIVE and the IRIS/

M.BLACK ACTIVE buttons are locked by pressing

the PANEL ACTIVE button for more than 2 seconds

in Panel active status.

Press and light the button to close the iris. To release

the close mode, press the button again so that it goes

dark.

The close mode is also released when you press the

STANDARD or IRIS/M.BLACK LINK button, or

operate a scene file.

qd AUTO SETUP buttons

For details on Panel Active Lock, see “Specifying the

Security Codes” on page 49.

AUTO SETUP

SKIN DTL LEVEL START

SET UP

WHITE BLACK

qa ASSIGN button

Various functions can be assigned to this button using

“SW Setting” of the RCP Config menu (No function is

assigned at the factory).

A Auto adjustment item select buttons

Press and light up these buttons to select the items to

be automatically adjusted.

To assign a function, see “Assigning a Function to the

ASSIGN Button” on page 48.

SKIN DTL SETUP: Skin detail

LEVEL: Gamma balance, knee point, master black

level, etc.

qs Power and output select buttons

For details on the Skin detail setup, see “Skin Detail

Correction/Skin Matrix Adjustment (for DXC-D30/D35/D50

Series Only)” on page 56.

B START button

CAM PW

BARS

Press to start automatic adjustment of the selected

items.

The button lights during adjustment and goes dark

when adjustment is completed.

A CAM PW (camera power) button

When the unit is connected to the CCU-TX7, you can

turn the power supply to the video camera ON by

pressing and lighting up this button. (The button

promptly flashes until the camera becomes ready for

transmission.)

C WHITE (white balance) button

Press to automatically adjust the white balance.

The button lights during adjustment and goes dark

when adjustment is completed.

When you press this button again, it starts flashing and

the power supply is turned off.

D BLACK (black balance) button

Press to automatically adjust the black balance and

black set.

The button lights during adjustment and goes dark

when adjustment is completed.

B BARS (color-bar signal) button

Press and light up this button to activate the color-bar

signal generator of the video camera and send the

respective the color-bar signal. When you press this

button again, the button goes dark and the camera

picture is displayed.

Note

If an error occurs during adjustment, the pressed

button flashes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Locations and Functions of Parts

qf White balance control buttons

PRESET

WHITE

PRESET: Press and light this button to retrieve the

preset white balance of the camera.

A (memory A): Press and light this button to retrieve

the white balance stored in memory A of the

camera.

B (memory B) (valid only with the DXC-D50

series): Press and light this button to retrieve the

white balance stored in memory B of the camera.

Note

When the ATW (automatic tracing white balance)

function is active, the white balance control buttons are

not operative.

qg MASTER GAMMA knob

Used to adjust the master gamma.

qh DETAIL knob

Used to adjust the detail level.

qj MEMORY STICK slot and access lamp

Insert a Memory Stick to store setting data, such as

reference files and scene files of the video camera or

CCU.

The access lamp shows the status of the Memory

Stick.

Off: No Memory Stick is inserted.

Lit in green: There is a Memory Stick in the slot. In

this condition, you can safely eject the Memory

Stick.

Lit in red: Data are being read/written. If you eject

the Memory Stick in this condition, the data are

not guaranteed. All the data may be lost.

Note

If “Check Memory Stick” is displayed on the LCD in

the menu operation block, check that the Memory

Stick has sufficient unused storage space or it has been

properly formatted.

For details on Memory Sticks, see page 59.

Download from Www.Somanuals.com. All Manuals Search And Download.

2 MONITOR button

Press this button to display the picture from the

connected camera on the LCD.

Menu operation block

Press the button again to return to the display of this

unit.

With a DXC-D50-series camera connected, eath time

you press the MONITOR button, the camera picture,

the camera picture with characters superimposed, and

the menu display of this unit are displayed in sequence

(When a CCU is used, the camera picture with

characters is not displayed).

PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS

MONITOR

FUNCTION

If no camera picture is displayed with the CCU-TX7

connected, consult your Sony dealer.

3 LCD/touch panel

Normally displays the statuses (see page 16).

When you press a MENU button, the corresponding

menu is displayed to enable you to adjust the displayed

items.

When you press the MONITOR button, the picture

from the camera is displayed.

MONITOR

BRIGHT

CONTRAST

4 Control knobs (rotary encoders)

In Menu mode, adjust the selected items on the touch

panel.

1 MENU buttons

Select the menu mode.

When the picture from the camera is displayed on the

LCD (MONITOR button lit), you can adjust the

picture brightness with the second knob (BRIGHT)

from the left and the picture contrast with the third

knob (CONTRAST) from the left.

If you press and light one of these buttons, the menu

for the selected mode appears on the LCD.

PAINT 1/2/3: Each selects the Paint menu to adjust

various paint items, such as white, black, and flare.

The configuration of the Paint menu depends on

the connected camera. When Paint 4 and Paint 5

are available, you can select them by pressing v or

V on the Paint menu display (see page 16) or the

PAINT 3 button.

SCENE: Selects the File operation menu to register

and retrieve scene files.

OTHERS: Selects the OTHERS menu to set various

settings, such as operational conditions of this

control panel.

FUNCTION: Selects the Function menu to control

various camera and CCU functions.

For the items of each menu, see “Menu Configuration and

Basic Menu Operations” on page 15.

Download from Www.Somanuals.com. All Manuals Search And Download.

Locations and Functions of Parts

Iris/master black control block (RCP-D50)

3 IRIS/M.BLACK LINK button

4 IRIS/M.BLACK ACTIVE button

5 AUTO button

6 f-number display

7 EXT indicator

EXT

IRIS/M.BLACK

ACTIVE

OPEN

IRIS/M.BLACK

LINK

1 MASTER BLACK display

8 SENS control knob

MASTER

BLACK

SENS

AUTO

2 MASTER BLACK RELATIVE

button

9 COARSE control knob

RELATIVE

OPEN

COARSE

0 Master black control ring

qa IRIS control lever

qs Preview switch

IRIS

qd IRIS RELATIVE button

1 MASTER BLACK display

Displays the current master black setting in the range

3 IRIS/M.BLACK LINK (iris/master black

adjustment link) button

from –99 to +99.

Press and light up the button to perform linked

adjustments of iris and master black for several

cameras.

For details, see “Adjusting the Iris/Master Black of Multiple

Cameras at One Time” on page 57.

2 MASTER BLACK RELATIVE button

When the IRIS/M.BLACK ACTIVE button is lit, the

master black adjustment mode can be selected with

this button.

4 IRIS/M.BLACK ACTIVE (iris/master black

active) button

Press and light up this button to enable the iris/master

black control block of the panel.

When the PANEL ACTIVE button is pressed, this

button also lights.

Press and light up the button for Relative mode, or

press and turn it dark for Absolute mode.

When the IRIS/M.BLACK ACTIVE button is not lit,

Relative mode is automatically selected and this button

is not operative.

Note

If you press this button so that it goes dark, the panel

will be locked, preventing accidental misoperation.

When VR STD MODE is set to Absolute with the VR

Setting of the RCP Config menu, Relative mode is not

selected even if you turn the IRIS/M.BLACK

ACTIVE button off. When you turn the IRIS/

M.BLACK ACTIVE button on, the master black value

corresponding to the position of the master black

control ring is restored.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 AUTO button

qd IRIS RELATIVE (iris relative) button

When the IRIS/M.BLACK ACTIVE button is lit, the

iris adjustment mode can be selected with this button.

Press and light up the button for Relative mode or

press so that it goes dark for Absolute mode.

When the IRIS/M.BLACK ACTIVE button is not lit,

Relative mode is automatically selected and this button

is not operative.

Press and light the button to automatically adjust the

iris according to the amount of input light.

When this button is lit, the reference value for

automatic iris adjustment can be set with the iris

control.

If you press the button when lit, it goes dark and

manual iris adjustment is enabled.

Note

6 f-number display

When VR STD MODE is set to Absolute with “VR

Setting” of the RCP Config menu, Relative mode is

not selected even if you turn the IRIS/M.BLACK

ACTIVE button off. When you turn the IRIS/

M.BLACK ACTIVE button on, the iris setting

corresponding to the IRIS lever position is restored.

Displays the f number of the current iris setting. When

the iris is closed, “CL” is displayed.

When the DXC-D50 series is connected, “OP” is

displayed for the maximum f-number value.

7 EXT (lens extender) indicator

Lights when the lens extender is used.

Iris adjustment functions

Relative mode

Absolute mode

8 SENS (sensitivity) control knob

Used for manual iris adjustment in Absolute mode.

This control is not operative when Relative mode is

selected.

(RELATIVE button lit)

(RELATIVE button not lit)

IRIS lever

Adjusts the iris with

Adjusts the iris

within the variable

(RCP-D50)/ relative values from

IRIS control OPEN to CLOSED.^a)range set by the

(RCP-D51)

SENS and COARSE

controls.

See the table “Iris adjustment functions”to the right.

COARSE

control

Adjusts the total

range from OPEN

to CLOSED in relative

values.

Sets the lower limit

for CLOSED.

9 COARSE control knob

Used for manual iris adjustment.

See the table “Iris adjustment functions”to the right.

SENS

control

Does not function.

Sets the upper limit

for OPEN according

to CLOSED value

set by the COARSE

control.

0 Master black control ring

Turn to manually adjust the master black level.

qa IRIS control lever

When the AUTO button is not lit, you can adjust the

a) The adjustable range can be set with “VR Rel. Scale” of

the RCP Config menu.

iris manually by moving the lever.

When the AUTO button is lit, the reference value for

automatic iris adjustment can be set.

See the table “Iris adjustment functions” to the right.

qs Preview switch

Press this switch to control an external device

connected to the EXT I/O connector on the connector

panel.

For the operational specifications, see “3 EXT I/O

(external input/output) connector (9-pin)” in “Connector

Panel” on page 13.

Download from Www.Somanuals.com. All Manuals Search And Download.

Locations and Functions of Parts

Iris/master black control block (RCP-D51)

4 IRIS RELATIVE button

5 IRIS/M.BLACK LINK button

1 MASTER BLACK display

6 f-number display

EXT

7 EXT indicator

2 MASTER BLACK control

8 SENS control knob

9 COARSE control knob

MASTER

BLACK

IRIS/

M.BLACK

LINK

SENS

RELATIVE

OPEN

COARSE

3 IRIS/M.BLACK ACTIVE button

AUTO

IRIS/M.BLACK

ACTIVE

0 IRIS control

qa Iris gauge

IRIS

qs AUTO button

1 MASTER BLACK display

Note

Displays the current master black setting in the range

from –99 to +99.

When VR STD MODE is set to Absolute with “VR

Setting” of the RCP Config menu, Relative mode is

not selected even if you turn the IRIS/M.BLACK

ACTIVE button off. When you turn the IRIS/

M.BLACK ACTIVE button on, the iris setting

corresponding to the position of the IRIS control is

restored.

2 MASTER BLACK control

Manually adjust the master black level.

The setting is displayed in the MASTER BLACK

display.

3 IRIS/M.BLACK ACTIVE (iris/master black

active) button

Press and light up this button to enable the iris/master

black control block of the panel.

When the PANEL ACTIVE button is pressed, this

button also lights.

If you press this button so that it goes dark, the panel

will be locked, preventing accidental misoperation.

5 IRIS/M.BLACK LINK (iris/master black

adjustment link) button

Press and light up the button to perform linked

adjustments of iris and master black for several

cameras.

For details, see “Adjusting the Iris/Master Black of Multiple

Cameras at One Time” on page 57.

6 f-number display

Displays the f number of the current iris setting. When

the iris is closed, “CL” is displayed.

When the DXC-D50 series is connected, “OP” is

displayed for the maximum f-number value.

4 IRIS RELATIVE (iris relative) button

When the IRIS/M.BLACK ACTIVE button is lit, the

iris adjustment mode can be selected with this button.

Press and light up the button for Relative mode or

press so that it goes dark for Absolute mode.

When the IRIS/M.BLACK ACTIVE button is not lit,

Relative mode is automatically selected and this button

is not operative.

7 EXT (lens extender) indicator

Lights when the lens extender is used.

Download from Www.Somanuals.com. All Manuals Search And Download.

8 SENS (sensitivity) control knob

Used for manual iris adjustment in Absolute mode.

This control is not operative when Relative mode is

selected.

Connector Panel

1 MONITOR connector

See the table “Iris adjustment functions”on page 11.

2 CCU/CAMERA connector

3 EXT I/O connector

9 COARSE control knob

Used for manual iris adjustment.

See the table “Iris adjustment functions” on page 11.

CCU/

CAMERA

MONITOR

EXT I/O

0 IRIS control

When the AUTO button is not lit, you can adjust the

iris manually by turning the control.

When the AUTO button is lit, the reference value for

automatic iris adjustment can be set with this control.

1 MONITOR connector (BNC type)

Connect to a video monitor.

See the table “Iris adjustment functions” on page 11.

2 CCU/CAMERA (camera control unit/camera)

connector (10-pin)

Connect to the REMOTE connector of a camera

control unit or a camera.

qa Iris gauge

Turn the gauge to set the line to the most frequently

used iris position, and it can be used as the reference

for manual iris adjustment.

3 EXT I/O (external input/output) connector

(9-pin)

This connector permits you to control an external

device using the PREVIEW button (page 6) or the

preview switch (page 11).

qs AUTO button

Press and light the button to automatically adjust the

iris according to the amount of input light.

When this button is lit, the reference value for

automatic iris adjustment can be set with the iris

control.

Operational specifications

If you press the button when lit, it goes dark and

manual iris adjustment is enabled.

While the PREVIEW button or the preview switch

(RCP-D50 only) is held pressed, pin 1 and pin 2 of the

EXT I/O connector are short-circuited.

Pin assignment of the EXT I/O connector

Caution

When installing this panel, provide a gap of 7 cm (3

inches) or more behind the connector panel to prevent

damage to cables.

Download from Www.Somanuals.com. All Manuals Search And Download.

Mounting on a Console

The RCP-D50/D51 can be mounted on a console as

shown below:

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

The RCP-D50/D51 provides menu operations for

various functions such as adjustments of system

equipment.

When the selected menu is composed of

multiple pages

With the menu that is composed of multiple pages

such as Paint menu, press v or V to flip the pages.

See “Initial display (Paint menu)” on the next page.

Basic Operating Procedure

When a submenu is shown

Press the desired submenu item to change the

display.

See “Submenu” on page 17.

3 Set or adjust the item (parameters).

FUNCTION MONITOR

PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS

• Turn the control knobs (or press the button) to

adjust (or set) the corresponding item

(parameters) to the desired values.

See “Adjustment display” on page 17.

• When a message is displayed, follow the

instruction and press [OK].

When the adjustment is finished

• To adjust another item of the same menu, press the

names of that item.

• To adjust items of another menu, press the

corresponding MENU button.

MONITOR

BRIGHT

CONTRAST

• To release the menu operation mode, press the lit

MENU button.

• You may select Function menu without exiting the

currently selected menu. When you exit Function

menu by either of the following methods, the

previous menu is restored.

– Press the lit FUNCTION button so that it goes dark.

– Press the lit MENU button for the previous menu.

1 To display a menu, press and light one of the

MENU buttons.

The menu operation mode is initiated and the menu

for the pressed button appears on the display.

PAINT 1/2/3: Paint menu

SCENE: Scene file operation menu

OTHERS: OTHERS menu

To monitor the camera picture

Press the MONITOR button.

The picture from the connected camera is displayed on

the LCD.

FUNCTION: Function menu

With a DXC-D50-series camera connected, eath time

you press the MONITOR button, the camera picture,

the camera picture with characters superimposed, and

the menu display of this unit are displayed in

sequence. (When a CCU is used, the camera picture

with characters is not displayed.)

Note

The menu items to be displayed depends on the

connected camera.

2 Select the item to be adjusted.

Press the button that shows the name of the item on

the menu to obtain the corresponding adjustment

display or operation area.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Basic Configuration of Menu Display

Status display

When you do not select any menu or the signal from

the camera, the LCD shows the following status

display:

On the status display, the set value

of each item is only displayed. The

setting is made with the Function

menu or with the corresponding

knob on the operation panel.

The set values of the shutter and master gain

are displayed. You may adjust these items

using the Function menu.

The ND filter number being selected

on the camera is displayed.

Status

Shutter

M. Gain

Filter

12dB

When you select a scene file,

the filename is displayed.

Scene File : 2 DXC-D50

White

You may adjust these items using the

WHITE, MASTER GAMMA, BLACK/

FLARE, and DETAIL knobs, and IRIS

control (or IRIS lever).

Gamma

Detail

Black

Iris

The “Black” columns can be changed to

“Flare” using the OTHERS menu.

Initial display (Paint menu)

When you press and light the PAINT 1 (or PAINT 2,

PAINT 3) button of the menu operation block, the

initial display of the Paint menu is obtained.

Current page number / total number of pages

1 / 5

Clear

To clear the adjusted values

Press either to flip the pages of the

menu.

Gamma

/Knee

White

Black

Flare

The names of the items are

displayed. Press the name

of the item to be adjusted.

The color of the pressed

name area will change, and

the lower half of the panel

will become the adjustment

display (see the next page).

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjustment display (Paint menu)

When you select an item on the initial display of the

Paint menu, the lower half of the panel becomes the

adjustment display for the selected item.

Example: when you select “White” from the PAINT 1 initial display with the DXC-D50 series

connected

The name of the item selected on

the initial display is displayed.

If you press this area after pressing

[Clear], all the adjustment values for

the selected item are initialized to

standard.

Clear

White

1 / 5

Black

Flare

Gamma

/Knee

When you press this, the upper

half of the panel becomes the

monitor output setting display

(see page 19).

Monitor

Select

White

Memory

Preset

Memory

ATW

When there are any ON/OFF

functions related to the adjustment,

the names of the functions are

displayed on this line.

The adjustment parameters

for the selected item and their

adjustment values are

displayed.

You may adjust these items

using the corresponding

control knobs.

If you press a value area after

pressing [Clear], that

adjustment value is initialized

to standard.

Submenu

If the selected item has many parameters, a submenu is

displayed.

Example: when you select “Skin Detail” from the PAINT 2 initial display (Advance mode)

with the DXC-D50 series connected

Clear

2 / 5

Detail

Skin

Detail

Black

Gamma

WF/PIX

Select

Detail 1

Submenu

Level

H/V Ratio Frequency

Press to switch the parameters.

WF/PIX

Select

Detail 2

Crispening Level Dep

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Function menu displays

When you press and light the FUNCTION button of

the menu operation block, the scene file operation

menu display is obtained.

When “Operation” is selected

Example: with the DXC-D50 series connected

The ND filter number being selected

on the camera is displayed.

Filter

Opera-

tion

Lens

/Pan

White

Black

Flare

Monitor

Select

Press one of these buttons

calls the adjustment display of

the corresponding paint item.

The items to be displayed on

this Function menu can be

changed using the OTHERS

menu. (You cannot jump to the

items that are not available on

the connected camera or

disabled.)

When you press this, the upper

half of the panel becomes the

monitor output setting display

(see the next page).

Gamma

/Knee

Detail

CLS

Skin

Detail

Matrix

Shutter

TLCS

Master

Gain

60 50.31

0dB

You may adjust these items using the

corresponding control knobs.

When “SW” is selected

Example: with the DXC-D35 series connected

Filter

Opera-

tion

Lens

/Pan

Current page number /

total number of pages

1 / 2

Skin

Detail

Skin

Gate

Press either to flip the pages of

the menu.

ATW

TLCS

Auto

Knee

Skin

Matrix

Flare

Off

These buttons turn on and off the

corresponding functions.

Any button whose designation includes “Off”

turns the respective function OFF when you

light it. Other buttons turn the respective

functions ON when you light them.

Download from Www.Somanuals.com. All Manuals Search And Download.

Monitor output set display (Expansion menu)

When you press [Monitor Select] on an adjustment

display of the Paint menu, the upper half of the panel

becomes the monitor output setting display.

When the CCU-TX7 is connected, you

can select the WF/PIX output signals.

R/G/B: To independently select the R,

G, or B signal.

Monitor Select

RGB

SEQ

ENC

RGB: To select the R, G, and B signals

in combination.

Monitor

Select

SEQ: Only the WF output is enabled,

and you can monitor the waveforms of

the R, G, and B signals in sequence.

Press again to return to

the previous display.

ENC (encode): The encoded signal is

output.

Scene File operation menu display

When you press and light the SCENE button of the

menu operation block, the Scene File operation menu

display is obtained.

Scene Files

Scene file store button

Store

Scene file recall buttons:

Buttons 1 to 20 can be displayed

by pressing v or V, or turning the

leftmost (Page) control knob.

Scene 1 : STUDIO1

Scene 2 : DXC-D30

Scene 3 : TEST 002

Scene 4 :

Scene :

DXC_D

Filename box:

File list

Enter a filename using the

second (Char) from the right and

the rightmost (Cur) control knob.

Scene 5 :

Page

Char

Cur

For details on the scene file operations, see page 53.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Menu Items with the DXC-D50-Series Cameras

The “Control items” marked with are those assigned

to the control knobs. The other items are operated on

the menu display.

The items displayed differ according to whether the

unit is in Advanced Setting mode or in Normal Setting

mode. The items shaded (

) in the table below are

displayed only in Advanced Setting mode.

Switching between Normal Setting mode and

Advanced Setting mode is performed in RCP Config

(Security → Status) on the OTHERS menu.

Paint menu (with the DXC-D50 series)

Paint menu consists of pages 1 to 5.

Paint 4 and 5 can also be selected in sequence by

pressing the PAINT 3 button.

You can select page 1 through 3 directly by pressing

the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.

Pressing vor V of the page selected with a MENU

button flip pages 1 through 5 in sequence.

Page

Submenu

Control item

White Preset

Memory A

Function

Paint 1

White

To retrieve the white balance settings preset by the camera

To retrieve the white-balance settings stored in Memory A. The

retrieved settings can be adjusted in Auto or Manual mode (the

adjusted values are stored in Memory A).

Memory B

ATW

To retrieve the white-balance settings stored in Memory B. The

retrieved settings can be adjusted in Auto or Manual mode (the

adjusted values are stored in Memory B).

To turn ON/OFF the Auto Tracing White function (which

automatically adjusts the white balance when lighting conditions

change)

• R

• B

To adjust the gain of the R signal in the white when Memory A or

Memory B is pressed

To adjust the gain of the B signal in the white when Memory A or

Memory B is pressed

Black

Flare

• R

To adjust the gain of the R signal in the black

To adjust the gain of the B signal in the black

To adjust the master black

• B

• Master

Flare Off

To turn the flare (black level when flare is generated) correction

function ON/OFF

• R

To adjust the amount of flare correction for the R signal

To adjust the amount of flare correction for the G signal

To adjust the amount of flare correction for the B signal

To turn the Auto Knee circuit ON/OFF

• G

• B

Gamma/Knee

Auto Knee

• Gamma

• Blk Gamma

• Knee Point

To adjust the gamma level

To adjust the black gamma level

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

• Knee Slope

To adjust the knee slope (amount of knee correction)

Download from Www.Somanuals.com. All Manuals Search And Download.

Page

Submenu

Control item

• Level

Function

Paint 2

Detail

Detail 1

To adjust the detail (contour correction) level

• H/V Ratio

To adjust the ratio of V (Vertical) detail to H (Horizontal) detail in

detail correction. As the value becomes larger, the V detail ratio

increases.

• Frequency

• Crispening

• Level Dep

• CCS Level

Detail Gate

Skin DTL

To adjust the boost frequency (thickness of contour lines) for the

detail correction

Detail 2

To adjust the crispening level (appropriate level at which details of

noise signals are removed)

To adjust the level dependence (level at which the detail signal starts

being suppressed)

Cross Color

Skin Detail

To adjust the cross color suppress level to suppress the phenomenon

of color jittering or coloring when a minutely striped pattern is shot

To turn ON/OFF the skin gate area (target color range of skin detail

correction or skin matrix adjustment)

To turn the skin detail function (which suppresses the contour

correction in the selected area) ON/OFF

Auto Skin

The unit will go to Standby mode when this button is pressed, and

will automatically start obtaining the skin gate area data when Start

is pressed.

• Level

To adjust the amount of skin detail correction. As the value becomes

larger, the amount of detail in the skin gate area decreases.

• Phase

• Width

• Sat

To adjust the color phase of the designated area

To adjust the color width of the designated area

To adjust the color saturation of the designated area

To adjust the level of the black R gamma

To adjust the level of the black B gamma

To adjust the master black gamma

Black Gamma

Knee/DL

• R

• B

• Master

Auto Knee

• Point

Paint 3

To turn the auto knee ON/OFF

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

• Slope

• R

To adjust the knee slope (amount of knee correction)

To adjust the level of the R gamma

Gamma

Matrix

• B

To adjust the level of the B gamma

• Master

• Hue

• Sat

To adjust the master gamma

Matrix 1

To adjust the hue of the linear matrix

To adjust the color saturation of the linear matrix

• Matrix

To select the Matrix Adjustment mode

STD: Standard

FL: For shooting under fluorescent light

High Sat: High saturation (increasing the saturation of primary

colors)

Matrix 2

Matrix 3

• R-G/• G-B/• B-R

To adjust the color tone for the R–G, G–B, or B–R elements of the

matrix

• Matrix

To select the Matrix Adjustment mode

• R-B/• G-R/• B-G

To adjust the color tone for the R–B, G–R, or B–G elements of the

matrix

• Matrix

Skin Matrix

• Hue

To select the Matrix Adjustment mode

Skin Matrix

To select the skin matrix function ON/OFF

To adjust the hue of the designated area

To adjust the color saturation of the designated area

• Sat

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Page

Submenu

Control item

Function

Paint 4

White Clip

• Master

To adjust the amount of white clip (the highest white level). As the

value becomes larger, the output level decreases.

TLCS

To turn the TLCS (total level control) function ON/OFF

• AGC/C.Point

To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris

control is switched to AGC (auto gain control)

• AGC/Limit

• AE/C.Point

To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/

18 dB) adjustment

To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris

control is switched to the AE (auto exposure)

• AE/Limit

STD

To set the upper limit value for AE control (100/150/200/250)

To select the standard auto iris mode

Auto Iris

Spot Light

Back Light

TLCS

To select the auto iris mode for shooting spot-lit subjects

To select the auto iris mode for shooting back-lit subjects

To turn the TLCS (total level control) function ON/OFF

To turn the shutter function ON/OFF

CLS/EVS

Shutter

CLS

To turn the CLS (clear scan) function (which reduces noise on the

horizontal scan lines when the monitor screen connected to a PC is

shot) ON/OFF

EVS

To turn the EVS mode (which reduces flicker by increasing the

vertical resolutions) ON/OFF

• Shutter

• CLS

To select the shutter speed

To adjust the CLS frequency

To adjust the low key saturation level

Paint 5

Low Key Sat

Auto Knee

• Level

Adaptive

To turn ON/OFF the function that makes the knee correction slope

smooth to make the gradation natural

Download from Www.Somanuals.com. All Manuals Search And Download.

Function menu (with the DXC-D50 series)

Control item

Jump menu 1

Jump menu 2

Jump menu 3

Jump menu 4

Function

Operation

To jump to the adjustment screen designated for Menu 1 in Menu Set ^a)(Default: White of Paint 1)

To jump to the adjustment screen designated for Menu 2 in Menu Set ^a)(Default:Black of Paint 1)

To jump to the adjustment screen designated for Menu 3 in Menu Set ^a)(Default: Flare of Paint 1)

To jump to the adjustment screen designated for Menu 4 in Menu Set ^a)(Default: Gamma/Knee

of Paint 1)

Jump menu 5

Jump menu 6

To jump to the adjustment screen designated for Menu 5 in Menu Set ^a)(Default: Detail of Paint 2)

To jump to the adjustment screen designated for Menu 6 in Menu Set ^a)(Default: Skin Detail of

Paint 2)

Jump menu 7

To jump to the adjustment screen designated for Menu 7 in Menu Set ^a)(Default: Matrix of Paint

Shutter

To turn the shutter function ON/OFF

• Shutter

CLS

To select the shutter speed

To turn the CLS (clear scan) function ON/OFF

To select the CLS frequency

• CLS

TLCS

To turn the TLCS (total level control) function ON/OFF

To select the master gain value among –3/0/3/6/9/12/18/24/30/36 dB

To turn the color temperature 5600K ON/OFF

To turn the skin detail function ON/OFF

• Master Gain

5600K

Skin Detail

Detail Gate

To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail

correction or the skin matrix adjustment)

ATW

To turn the ATW (auto tracing white balance) function (which automatically adjusts the white

balance when lighting conditions change) ON/OFF

TLCS

To turn the TLCS (total level control) function ON/OFF

To turn the Auto Knee function ON/OFF

To turn the skin matrix function ON/OFF

To turn the flare correction function ON/OFF (OFF while the button is lit)

To turn the option control function 1 ON/OFF

To turn the option control function 2 ON/OFF

To adjust the focus

Auto Knee

Skin Matrix

Flare Off

Option 1

Option 2

• Focus ^c)

• Zoom ^c)

• Pan ^d)

Lens/Pan ^b)

To adjust the zoom

To adjust panning of the tripod head

• Tilt ^d)

To adjust tilting of the tripod head

a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.

b) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.

c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.

d) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

OTHERS menu (with the DXC-D50 series)

2ndary menu Submenu

Control item

Function

Adjusting

White Shading

• R

To adjust the V white shading (vertical variation of the white) of the

R signal

• G

To adjust the V white shading of the G signal

To adjust the V white shading of the B signal

• B

Camera

Config

Camera ID

CAM ID IND

To turn the camera ID display ON/OFF while the camera is in Color

Bars mode

Clock IND

• Char

Switching of the clock indication

Cam: To always display the clock indication

Bars: To display only when the camera color bars are displayed

Off: No clock indication

To select characters when entering a camera ID (alphanumerics,

symbols, and space)

• Cur

To move the cursor when entering a camera ID (eight characters)

To register the entered camera ID

ID SET

Center Marker

Safety Zone

Screen Mode

Req

To turn the center marker ON/OFF

To set the safety zone (90%/80%/OFF)

To select the Screen mode (4:3/16:9)

Screen Mode ^a)

Diag

To request camera’s self-diagnostic data (available only when any

abnormality has been detected during self-diagnosis)

Reset

• Sel

To erase the camera’s self-diagnostic data

To display the data read from the camera in order (No display when

no abnormality has been detected during self-diagnosis)

Bars

Bars Type

To select the type of color-bar signals:

SMPTE(SPLIT)/SNG/FF 75%/FF 100%

File

Scene Trans

CAM->MS

MS->CAM

To transfer a scene file (from the camera to the Memory Stick)

To transfer a scene file (from the Memory Stick to the camera)

To copy the status of the master unit to slave units

To set the volume of the call buzzer

Copy to Slave

RCP Config RCP

Adjusting

Buzzer

• Call

Volume

• Touch

• Switch

To set the responding sound volume of the touch panel

To set the confirmation sound volume of the self-illuminating

switches

• Master

To set the total buzzer sound volume

Call Buzzer

Touch Click

SW Click

All Off

To turn the call buzzer ON/OFF

To turn the responding sound of the touch panel ON/OFF

To turn the confirmation sound of switches ON/OFF

To turn the volume of all the buzzers ON/OFF

To set the brightness of respective LEDs

LED Bright

• Switch

• Tally

• Other

• Master

To set the brightness of the all LEDs of the unit

RE Setting

VR Setting

BLACK/FLARE

To select the function for the BLACK/FLARE knob

Black: Black balance adjustment

Flare: Flare balance adjustment

VR STD Mode

To select the initial settings for IRIS or MASTER BLACK

adjustment mode: Absolute or Relative

VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value

adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest

response position)

a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

2ndary menu Submenu

Control item

Function

RCP Config VR Setting

(cont.)

M. Black VR

(Only available for RCP-D50) To select the response rate of the

MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,

and 1/4, where 1/1 is the quickest response position)

(cont.)

Information

Cable Comp

SW Setting

To display the software version of the unit

Cable Length

To set the length of the remote cable (5 m/25 m/50 m)

• SW Assign/Sel

To allocate a function to the ASSIGN button

No Assign: No assignment

Black/Flare: Switching the function of the BLACK/FLARE knobs

Black Auto: ON/OFF of the auto black (Not operative)

ATW: ON/OFF of the auto tracing white balance

TLCS: ON/OFF of the total level control function

DynaLatitude: ON/OFF of the DynaLatitude function (Not operative)

CAM No.

CAM ID->No.

To switch the display of the camera number/tally indication of the

unit between camera ID and camera number

• No.

To select the camera number to be displayed on the RCP

Date adjustment of the clock built into the unit

Date/Time

Set

Date

• Year

• Month

• Day

Set

Cancel

• Hour

• Minute

• Second

Set

Time

Time adjustment of the clock built into the unit

Cancel

Gain

Comm Link

To turn ON/OFF command link operation (activation of several

cameras at the same time) of the gain

Shutter

To turn ON/OFF command link operation of shutter settings

R/B White

To turn ON/OFF command link operation of the white R/B

adjustment

R/B Black

To turn ON/OFF command link operation of the black R/B

adjustment

R/G/B Flare

Protocol Type ^a)

To turn ON/OFF command link operation of the flare R/G/B

adjustment

Comm Type

To set the connection mode

P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,

CCU-D50, DSR-300/370/390/500/570

P Type 7: When connected to CCU-TX50

a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

2ndary menu Submenu

Control item

Function

RCP Config Security

(cont.)

Engineer Mode

To set whether to display “Status”, “Menu Set”, and “Code No.” or

not (With Engineer Mode ON, all operative menu items are

displayed regardless of the Advance Mode setting.)

Status ^a)

Advance Mode

To switch between the Normal Setting mode and Advanced Setting

mode of the menu

Screen Md Enable

Pan/Tilt Enable

Power On Active

To set whether switching between 4:3 and 16:9 is enabled or not

To set whether panning/tilting adjustment is enabled or not

To specify the Panel Active and Iris/Master Black Active statuses

when the unit is started up

Full Active: To set the unit to the Panel Active status when started up

IRIS/M.Black: To set the unit to the Iris/Master Black Active

status when started up

Lock: To set the unit to the Panel Lock status when started up

Keep state: To set the unit to the previous state when started up

Panel Active Lock

To set whether to use the Panel Active Lock function with a security

code or not.

Disable: Not to use the Panel Active Lock function

Enable: To use the Panel Active Lock function by specifying a

new security code

Enable (Engineer Code): To use the Panel Active Lock function

with the same security code as that for Engineer Mode

Code Change

To change the security code for Panel Active Lock (displayed only

when a security code for Panel Active Lock has been set)

Menu Set ^a)

Code No. ^a)

To select an item to be displayed on the function menu. Select the

number (1-7) using • Cur, and select the item with • Sel: White,

Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black

STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White

Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump

Code No.

To enable/disable the security code setting for Engineer Mode

Code Change

To change the security code for Engineer Mode (displayed only

when a security code for Engineer Mode has been set)

LCD

LCD Brightness/Contrast

• Bright

• Cont

To set the brightness of the LCD of the unit

To set the contrast of the LCD of the unit

LCD Moni. LCD Monitor

• Bright

To set the brightness of the LCD of the unit when displaying the

camera picture

Brightness/Contrast

• Cont

To set the contrast of the LCD of the unit when displaying the

camera picture

Memory Stick Memory Stick

Format

To perform formatting of the Memory Stick

a) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Items with the DXC-D30/D35-Series Cameras

The “Control items” marked with are those assigned

to the control knobs. The other items are operated on

the menu display.

The items displayed differ according to whether the

unit is in Advanced Setting mode or in Normal Setting

mode. The items shaded (

) in the table below are

displayed only in Advanced Setting mode.

Switching between Normal Setting mode and

Advanced Setting mode is performed in RCP Config

(Security → Status) on the OTHERS menu.

Paint menu (with the DXC-D30/D35 series)

Paint menu consists of pages 1 to 4.

Paint 4 can also be selected by pressing the PAINT 3

button.

You can select page 1 through 3 directly by pressing

the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.

Pressing vor V of the page selected with a MENU

button flip pages 1 through 4 in sequence.

Page

Submenu

Control item

White Preset

Auto

Function

Paint 1

White

To retrieve the preset white balance settings in the camera

To select the auto white balance adjustment mode

To select the manual white balance adjustment mode

Manual

ATW

To turn ON/OFF the Auto Tracing White function (which

automatically adjusts the white balance when lighting conditions

change)

• R

• B

To adjust the gain for the R signal in the white when Manual is

pressed

To adjust the gain for the B signal in the white when Manual is

pressed

Black

Auto

To select the auto black balance adjustment mode

To select the manual black balance adjustment mode

To adjust the gain of the R signal in the black

To adjust the gain of the B signal in the black

To adjust the master black

Manual

• R

• B

• Master

Flare Off

Flare

To turn the flare (black level when flare is generated) correction

function ON/OFF

• R

• G

• B

To adjust the amount of flare correction for the R signal

To adjust the amount of flare correction for the G signal

To adjust the amount of flare correction for the B signal

Gamma/Knee

To turn ON/OFF the DynaLatitude function (for automatically

setting the contrast between the bright and dark areas by detecting

the levels of the subject in these areas)

Knee Preset

Auto Knee

• Gamma

To turn ON/OFF the mode that uses the preset knee correction value

To turn the Auto Knee circuit ON/OFF

To adjust the gamma level

• Knee Point

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

• Knee Slope

To adjust the knee slope (amount of knee correction)

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Page

Submenu

Control item

• Level

Function

Paint 2

Detail

Detail 1

To adjust the detail (contour correction) level

• H/V Ratio

To adjust the ratio of V (vertical) detail to H (horizontal) detail in

detail correction. As the value becomes larger, the V detail ratio

increases.

• Frequency

To adjust the boost frequency (thickness of contour lines) for the

detail correction

• V-Limit

To adjust the limit value for vertical detail

Detail 2

• Crispening

To adjust the crispening level (appropriate level at which details of

noise signals are removed)

• Level Dep

• High L.

To adjust the level dependence (level at which the detail signal starts

being suppressed)

To adjust the amount of suppression of highlight detail (detail added

to a high-luminance area)

• AFT GAM

Aperture

To adjust the amount of detail added after gamma correction

To turn the aperture correction ON/OFF

Detail 3

Knee Apert

To turn ON/OFF the detail correction to the level higher than the

knee point

• Aperture

To adjust the amount of aperture correction

• Knee Apert

To adjust the amount of detail correction to the level higher than the

knee point

Cross Color

Skin Detail

Comb Filter R

Comb Filter G

• CCS Level

To turn the red comb filter in the detail circuit ON/OFF. If OFF is

selected, clarity improves, but cross color increases.

To turn the green comb filter in the detail circuit ON/OFF. If OFF is

selected, clarity improves, but cross color increases.

To adjust the cross color suppress level to suppress the phenomenon

of color jittering or coloring when a minutely striped pattern is shot

Skin Detail 1 Detail Gate

Skin DTL

To turn ON/OFF the skin gate area (target color range of skin detail

correction or skin matrix adjustment)

To turn the skin detail function (which suppresses the contour

correction in the selected area) ON/OFF

Auto Skin

The unit will go to Standby mode when this button is pressed, and

will automatically start obtaining the skin gate area data when Start

is pressed.

• Level

• Size

To adjust the amount of skin detail correction. As the value becomes

larger, the amount of detail in the skin gate area decreases.

To adjust the R–Y and B–Y ranges of the skin gate area (for setting

each range to the same value at the same time)

• R-Y

• B-Y

To adjust the R–Y range of the skin gate area

To adjust the B–Y range of the skin gate area

To turn the display of skin gate area ON/OFF

To turn the skin detail function ON/OFF

Skin Detail 2 Skin Gate

Skin DTL

Auto Skin

The unit will go to Standby mode when this button is pressed, and

will automatically start obtaining the skin gate area data when Start

is pressed.

• Level

• Posi

To adjust the skin detail level

To adjust the R–Y and B–Y position of the skin detail gate area (for

setting each range to the same value at the same time)

• R-Y

• B-Y

To adjust the R–Y position of the skin detail gate area

To adjust the B–Y position of the skin detail gate area

Download from Www.Somanuals.com. All Manuals Search And Download.

Page

Submenu

Black

Control item

Function

Paint 2

(cont.)

Black STR

• Level

To adjust the black stretch level

Stretch 1

• Stretch Level/Point 1 To adjust the upper limit of the signal levels that activate the black

stretch function

• Stretch Level/Point 2 To adjust the lower limit of the signal levels that activate the black

stretch function

Black

• Level

To adjust the black stretch level

Stretch 2

• Compress Level/

Point 1

To adjust the upper limit of the signal levels that activate the black

compress function

• Compress Level/

Point 2

To adjust the lower limit of the signal levels that activate the black

compress function

Paint 3

Knee/DL

To turn ON/OFF the DynaLatitude function (for automatically

setting the contrast between the bright and dark areas by detecting

the levels of the subject in these areas)

Knee Preset

Auto Knee

• DL

To turn ON/OFF the mode that uses the preset knee correction value

To turn the Auto Knee function ON/OFF

To select the level of the DynaLatitude effects (Low/STD/High)

• Point

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

• Slope

• Master

Init 3.5

To adjust the knee slope (amount of knee correction)

To adjust the master gamma

Gamma

To set the value of the initial part of the gamma curve for low

brightness to 3.5

Init 4.0

To set the value of the initial part of the gamma curve for low

brightness to 4.0

• R

To adjust the level of the R gamma

To adjust the level of the B gamma

To turn the matrix ON/OFF

• B

Matrix

Matrix 1

Matrix Off

• Hue

To adjust the hue of the linear matrix

To adjust the color saturation of the linear matrix

• Sat

Matrix 2

Matrix 3

• R-G/• G-B/• B-R

To adjust the color tone for the R–G, G–B, or B–R elements of the

matrix

• R-B/• G-R/• B-G

To adjust the color tone for the R–B, G–R, or B–G elements of the

matrix

Skin Matrix

• Hue

To select the skin matrix function ON/OFF

To adjust the hue of the designated area

• Sat

To adjust the color saturation of the designated area

Paint 4

White Clip

TLCS

• Master

To adjust the amount of white clip (the highest white level). As the

value becomes larger, the output level decreases.

TLCS

To turn the TLCS (total level control) function ON/OFF

• AGC/C.Point

To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris

control is switched to AGC (auto gain control)

• AGC/Limit

• AE/C.Point

To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/18

dB) adjustment

To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris

control is switched to the AE (auto exposure)

Auto Iris

STD

To select the standard auto iris mode

Spot Light

Back Light

To select the auto iris mode for shooting spot-lit subjects

To select the auto iris mode for shooting back-lit subjects

To select the intelligent auto iris mode ^a)

a) Only with models with the AI function

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Page

Submenu

Control item

TLCS

Function

Paint 4

(cont.)

CLS/EVS

To turn the TLCS (total level control) function ON/OFF

To turn the shutter function ON/OFF

Shutter

CLS

To turn the CLS (clear scan) function (which reduces noise on the

horizontal scan lines when the monitor screen connected to a PC is

shot) ON/OFF

EVS

To turn the EVS mode (which reduces flicker by increasing the

vertical resolutions) ON/OFF

• Shutter

• CLS

To select the shutter speed

To adjust the CLS frequency

Function menu (with the DXC-D30/D35 series)

Submenu Control item

Jump menu 1

Function

Operation

To jump to the adjustment screen designated for Menu 1 in Menu Set ^a)(Default: White of Paint 1)

To jump to the adjustment screen designated for Menu 2 in Menu Set ^a)(Default:Black of Paint 1)

To jump to the adjustment screen designated for Menu 3 in Menu Set ^a)(Default: Flare of Paint 1)

Jump menu 2

Jump menu 3

Jump menu 4

To jump to the adjustment screen designated for Menu 4 in Menu Set ^a)(Default: Gamma/Knee

of Paint 1)

Jump menu 5

Jump menu 6

To jump to the adjustment screen designated for Menu 5 in Menu Set ^a)(Default: Detail of Paint 2)

To jump to the adjustment screen designated for Menu 6 in Menu Set ^a)(Default: Skin Detail of

Paint 2)

Jump menu 7

To jump to the adjustment screen designated for Menu 7 in Menu Set ^a)(Default: Matrix of Paint

Shutter

• Shutter

CLS

To turn the shutter function ON/OFF

To select the shutter speed

To turn the CLS (clear scan) function ON/OFF

To select the CLS frequency

• CLS

TLCS

To turn the TLCS (total level control) function ON/OFF

To select the master gain value among –3/0/3/6/9/12/18/18+DPR/24/24+DPR/HYPER Gain

To turn the skin detail function ON/OFF

• Master Gain

Page1

Skin Detail

Detail Gate

To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail

correction or the skin matrix adjustment)

ATW

To turn the ATW (auto tracing white balance) function (which automatically adjusts the white

balance when lighting conditions change) ON/OFF

TLCS

To turn the TLCS (total level control) function ON/OFF

To turn the Auto Knee function ON/OFF

Auto Knee

Skin Matrix

Flare Off

To turn the skin matrix function ON/OFF

To turn the flare correction function ON/OFF (OFF while the button is lit)

Page 2

Knee Aperture To turn ON/OFF the detail correction to the level higher than the knee point

Aperture

To turn the aperture correction ON/OFF

To turn ON/OFF the DynaLatitude function (for automatically setting the contrast between the

bright and dark areas by detecting the levels of the subject in these areas)

White Clip Off To turn the white clip function ON/OFF (OFF while the button is lit)

Detail Off

Gamma Off

Matrix Off

To turn the detail adjustment function ON/OFF (OFF while the button is lit)

To turn the gamma adjustment function ON/OFF (OFF while the button is lit)

To turn the linear matrix adjustment function ON/OFF (OFF while the button is lit)

a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Lens/Pan ^a)

Submenu Control item

Option 1

Function

To turn the option control function 1 ON/OFF

To turn the option control function 2 ON/OFF

To adjust the focus

Option 2

• Focus ^b)

• Zoom ^b)

To adjust the zoom

• Pan ^c)

• Tilt ^c)

To adjust panning of the tripod head

To adjust tilting of the tripod head

a) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.

b) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.

c) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.

OTHERS menu (with the DXC-D30/D35 series)

2ndary menu Submenu

Control item

Function

Adjusting

White Shading

• R

To adjust the V white shading (vertical variation of the white) of the

R signal

• G

To adjust the V white shading of the G signal

To adjust the V white shading of the B signal

• B

Camera

Config

Camera ID

CAM ID IND

To turn the camera ID display ON/OFF while the camera is in Color

Bars mode

Clock IND

• Char

Switching of the clock indication

Cam: To always display the clock indication

Bars: To display only when the camera color bars are displayed

Off: No clock indication

To select characters when entering a camera ID (alphanumerics,

symbols, and space)

• Cur

To move the cursor when entering a camera ID (eight characters)

To register the entered camera ID

ID SET

Center Marker

Safety Zone

Screen Mode

Req

To turn the center marker ON/OFF

To set the safety zone (90%/80%/OFF)

To select the Screen mode (4:3/16:9)

Screen Mode ^a)

Diag

To request camera’s self-diagnostic data (available only when any

abnormality has been detected during self-diagnosis)

Reset

• Sel

To erase the camera’s self-diagnostic data

To display the data read from the camera in order (No display when

no abnormality has been detected during self-diagnosis)

Bars

Bars Type

To select the type of color-bar signals:

SMPTE (SPLIT)/SNG/FF 75%/FF 100%

File

Setup File

To store/retrieve a setup file

Copy to Slave

To copy the scene files to slave units

To set the volume of the call buzzer

To set the responding sound volume of the touch panel

RCP Config RCP

Adjusting

Buzzer

Volume

• Call

• Touch

• Switch

To set the confirmation sound volume of the self-illuminating

switches

• Master

To set the total buzzer sound volume

Call Buzzer

Touch Click

SW Click

All Off

To turn the call buzzer ON/OFF

To turn the responding sound of the touch panel ON/OFF

To turn the confirmation sound of switches ON/OFF

To turn the volume of all the buzzers ON/OFF

a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

2ndary menu Submenu

Control item

• Switch

Function

RCP Config RCP

(cont.) Adjusting

LED Bright

To set the brightness of respective LEDs

• Tally

(cont.)

• Other

• Master

To set the brightness of the all LEDs of the unit

RE Setting

BLACK/FLARE

To select the function for the BLACK/FLARE knob

Black: Black balance adjustment

Flare: Flare balance adjustment

VR Setting

VR STD Mode

To select the initial settings for IRIS or MASTER BLACK

Adjustment mode: Absolute or Relative

VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value

adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest

response position)

M. Black VR

(Only available for RCP-D50) To select the response rate of the

MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,

and 1/4, where 1/1 is the quickest response position)

Information

Cable Comp

SW Setting

To display the software version of the unit

Cable Length

To set the length of the remote cable (5 m/25 m/50 m)

• SW Assign/Sel

To allocate a function to the ASSIGN button

No Assign: No assignment

Black/Flare: Switching the function of the BLACK/FLARE knobs

Black Auto: ON/OFF of the auto black

ATW: ON/OFF of the auto tracing white balance

TLCS: ON/OFF of the total level control function

DynaLatitude: ON/OFF of the DynaLatitude function

CAM No.

CAM ID->No.

To switch the display of the camera number/tally indication of the

unit between camera ID and camera number

• No.

To select the camera number to be displayed on the RCP

Date adjustment of the clock built into the unit

Date/Time

Set

Date

• Year

• Month

• Day

Set

Cancel

• Hour

• Minute

• Second

Set

Time

Time adjustment of the clock built into the unit

Cancel

Gain

Comm Link

To turn ON/OFF command link operation (activation of several

cameras at the same time) of the gain

Shutter

To turn ON/OFF command link operation of shutter settings

R/B White

To turn ON/OFF command link operation of the white R/B

adjustment

R/B Black

To turn ON/OFF command link operation of the black R/B

adjustment

R/G/B Flare

Protocol Type ^a)

To turn ON/OFF command link operation of the flare R/G/B

adjustment

Comm Type

To set the connection mode

P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,

CCU-D50, DSR-300/370/390/500/570

P Type 7: When connected to CCU-TX50

a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

2ndary menu Submenu

Control item

Function

RCP Config Security

(cont.)

Engineer Mode

To set whether to display “Status”, “Menu Set”, and “Code No.” or

not (With Engineer Mode ON, all operative menu items are

displayed regardless of the Advance Mode setting.)

Status ^a)

Advance Mode

To switch between the Normal Setting mode and Advanced Setting

mode of the menu

Screen Md Enable

Pan/Tilt Enable

Power On Active

To set whether switching between 4:3 and 16:9 is enabled or not

To set whether panning/tilting adjustment is enabled or not

To specify the Panel Active and Iris/Master Black Active statuses

when the unit is started up

Full Active: To set the unit to the Panel Active status when started up

IRIS/M.Black: To set the unit to the Iris/Master Black Active

status when started up

Lock: To set the unit to the Panel Lock status when started up

Keep state: To set the unit to the previous state when started up

Panel Active Lock

To set whether to use the Panel Active Lock function with a security

code or not.

Disable: Not to use the Panel Active Lock function

Enable: To use the Panel Active Lock function by specifying a

new security code

Enable (Engineer Code): To use the Panel Active Lock function

with the same security code as that for Engineer Mode

Code Change

To change the security code for Panel Active Lock (displayed only

when a security code for Panel Active Lock has been set)

Menu Set ^a)

Code No. ^a)

To select an item to be displayed on the function menu. Select the

number (1-7) using • Cur, and select the item with • Sel: White,

Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black

STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White

Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump

Code No.

To enable/disable the security code setting for Engineer Mode

Code Change

To change the security code for Engineer Mode (displayed only

when a security code for Engineer Mode has been set)

LCD

LCD Brightness/Contrast

• Bright

• Cont

To set the brightness of the LCD of the unit

To set the contrast of the LCD of the unit

LCD Moni. LCD Monitor

• Bright

To set the brightness of the LCD of the unit when displaying the

camera picture

Brightness/Contrast

• Cont

To set the contrast of the LCD of the unit when displaying the

camera picture

Memory Stick Memory Stick

Format

To perform formatting of the Memory Stick

a) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Menu Items with the DXC-637-Series Cameras

The “Control items” marked with are those assigned

to the control knobs. The other items are operated on

the menu display.

The items displayed differ according to whether the

unit is in Advanced Setting mode or in Normal Setting

mode. The items shaded (

) in the table below are

To operate the DXC-637-series cameras from this unit,

it is necessary to connect the camera and this unit via

the CCU-TX7.

displayed only in Advanced Setting mode.

Switching between Normal Setting mode and

Advanced Setting mode is performed in RCP Config

(Security → Status) on the OTHERS menu.

Paint menu (with the DXC-637 series)

Paint menu consists of pages 1 to 3.

Page

Control item

White Preset

Auto

Function

Paint 1

White

To retrieve the preset white balance settings in the camera

To select the auto white balance adjustment mode ^a)

To select the manual white balance adjustment mode ^a)

Manual

ATW

To turn ON/OFF the Auto Tracing White function (which

automatically adjusts the white balance when lighting conditions

change)

• R

• B

To adjust the gain for the R signal in the white when Manual is

pressed

To adjust the gain for the B signal in the white when Manual is

pressed

Black

Auto

To select the auto black balance adjustment mode ^a)

To select the manual black balance adjustment mode ^a)

To adjust the gain of the R signal in the black

To adjust the gain of the B signal in the black

To adjust the master black

Manual

• R

• B

• Master

Knee Preset

Auto Knee

• Knee Point

Gamma/Knee

To turn ON/OFF the mode that uses the preset knee correction value

To turn the Auto Knee circuit ON/OFF

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

Paint 2

Paint 3

Detail

• Level

To adjust the detail (contour correction) level

Knee/DL

Knee Preset

Auto Knee

• Point

To turn ON/OFF the mode that uses the preset knee correction value

To turn the Auto Knee function ON/OFF

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

Matrix

• Matrix

To select the Matrix Adjustment mode

STD: Standard

FL: For shooting under fluorescent light

High Sat: High saturation (increasing the saturation of primary

colors)

a) The Auto/Manual setting for Black is synchronized with that for White.

Download from Www.Somanuals.com. All Manuals Search And Download.

Function menu (with the DXC-637 series)

Control item

Jump menu 1

Jump menu 2

Jump menu 3

Jump menu 4

Function

Operation

To jump to the adjustment screen designated for Menu 1 in Menu Set ^a)(Default: White of Paint 1)

To jump to the adjustment screen designated for Menu 2 in Menu Set ^a)(Default:Black of Paint 1)

To jump to the adjustment screen designated for Menu 3 in Menu Set ^a)(Default: Flare of Paint 1)

To jump to the adjustment screen designated for Menu 4 in Menu Set ^a)(Default: Gamma/Knee

of Paint 1)

Jump menu 5

Jump menu 6

To jump to the adjustment screen designated for Menu 5 in Menu Set ^a)(Default: Detail of Paint 2)

To jump to the adjustment screen designated for Menu 6 in Menu Set ^a)(Default: Skin Detail of

Paint 2)

Jump menu 7

To jump to the adjustment screen designated for Menu 7 in Menu Set ^a)(Default: Matrix of Paint

Shutter

• Shutter

CLS

To turn the shutter function ON/OFF

To select the shutter speed

To turn the CLS (clear scan) function ON/OFF

To select the CLS frequency

• CLS

• Master Gain

ATW

To select the master gain setting from among Hi/Mid/Low

To turn the ATW (auto tracing white balance) function (which automatically adjusts the white

balance when lighting conditions change) ON/OFF

Auto Knee

Option 1

Option 2

• Focus ^c)

• Zoom ^c)

• Pan ^d)

To turn the Auto Knee function ON/OFF

To turn the option control function 1 ON/OFF

To turn the option control function 2 ON/OFF

To adjust the focus

Lens/Pan ^b)

To adjust the zoom

To adjust panning of the tripod head

To adjust tilting of the tripod head

• Tilt ^d)

a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.

b) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.

c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.

d) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

OTHERS menu (with the DXC-637 series)

2ndary menu Submenu

Control item

Function

Camera

Config

Title ID

Title IND

To turn the title display ON/OFF while the camera is in Color Bars

mode

Clock IND

Switching of the clock indication

Cam: To always display the clock indication

Off: No clock indication

File

Copy to Slave

To copy the status of the master unit to slave units

To set the volume of the call buzzer

RCP Config RCP

Adjusting

Buzzer

• Call

Volume

• Touch

• Switch

To set the responding sound volume of the touch panel

To set the confirmation sound volume of the self-illuminating

switches

• Master

To set the total buzzer sound volume

Call Buzzer

Touch Click

SW Click

All Off

To turn the call buzzer ON/OFF

To turn the responding sound of the touch panel ON/OFF

To turn the confirmation sound of switches ON/OFF

To turn the volume of all the buzzers ON/OFF

To set the brightness of respective LEDs

LED Bright

• Switch

• Tally

• Other

• Master

To set the brightness of the all LEDs of the unit

VR Setting

VR STD Mode

To select the initial settings for IRIS or MASTER BLACK

Adjustment mode: Absolute or Relative

VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value

adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest

response position)

M. Black VR

(Only available for RCP-D50) To select the response rate of the

MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,

and 1/4, where 1/1 is the quickest response position)

Information

Cable Comp

SW Setting

To display the software version of the unit

Cable Length

To set the length of the remote cable (5 m/25 m/50 m)

• SW Assign/Sel

To allocate a function to the ASSIGN button

No Assign: No assignment

Black/Flare: Switching the function of the BLACK/FLARE knobs

Black Auto: ON/OFF of the auto black (not operative)

ATW: ON/OFF of the auto tracing white balance

TLCS: ON/OFF of the total level control function (not operative)

DynaLatitude: ON/OFF of the DynaLatitude function (not operative)

CAM No.

• No.

To select the camera number to be displayed on the RCP

Date adjustment of the clock built into the unit

Date/Time Set Date

• Year

• Month

• Day

Set

Cancel

• Hour

• Minute

• Second

Set

Time

Time adjustment of the clock built into the unit

Cancel

Download from Www.Somanuals.com. All Manuals Search And Download.

2ndary menu Submenu

Control item

Function

RCP Config Comm Link

(cont.)

Gain

To turn ON/OFF command link operation (activation of several

cameras at the same time) of the gain

Shutter

To turn ON/OFF command link operation of shutter settings

R/B White

To turn ON/OFF command link operation of the white R/B

adjustment

R/B Black

To turn ON/OFF command link operation of the black R/B

adjustment

R/G/B Flare

Protocol Type ^a)

To turn ON/OFF command link operation of the flare R/G/B

adjustment

Comm Type

Security

To set the connection mode

P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,

CCU-D50, DSR-300/370/390/500/570

P Type 7: When connected to CCU-TX50

Engineer Mode

Status ^b)

To set whether to display “Status”, “Menu Set”, and “Code No.” or

not (With Engineer Mode ON, all operative menu items are

displayed regardless of the Advance Mode setting.)

Advance Mode

To switch between the Normal Setting mode and Advanced Setting

mode of the menu

Screen Md Enable

Pan/Tilt Enable

Power On Active

To set whether switching between 4:3 and 16:9 is enabled or not

To set whether panning/tilting adjustment is enabled or not

To specify the Panel Active and Iris/Master Black Active statuses

when the unit is started up

Full Active: To set the unit to the Panel Active status when started up

IRIS/M.Black: To set the unit to the Iris/Master Black Active

status when started up

Lock: To set the unit to the Panel Lock status when started up

Keep state: To set the unit to the previous state when started up

Panel Active Lock

To set whether to use the Panel Active Lock function with a security

code or not.

Disable: Not to use the Panel Active Lock function

Enable: To use the Panel Active Lock function by specifying a

new security code

Enable (Engineer Code): To use the Panel Active Lock function

with the same security code as that for Engineer Mode

Code Change

To change the security code for Panel Active Lock (displayed only

when a security code for Panel Active Lock has been set)

Menu Set ^b)

Code No. ^b)

To select an item to be displayed on the function menu. Select the

number (1-7) using • Cur, and select the item with • Sel: White,

Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black

STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White

Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump

Code No.

To enable/disable the security code setting for Engineer Mode

Code Change

To change the security code for Engineer Mode (displayed only

when a security code for Engineer Mode has been set)

LCD

LCD Brightness/Contrast

• Bright

• Cont

To set the brightness of the LCD of the unit

To set the contrast of the LCD of the unit

LCD Moni. LCD Monitor

• Bright

To set the brightness of the LCD of the unit when displaying the

camera picture

Brightness/Contrast

• Cont

To set the contrast of the LCD of the unit when displaying the

camera picture

Memory Stick Memory Stick

Format

To perform formatting of the Memory Stick

a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.

b) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Menu Items with the CCU-TX50

The “Control items” marked with are those assigned

to the control knobs. The other items are operated on

the menu display.

The items displayed differ according to whether the

unit is in Advanced Setting mode or in Normal Setting

mode. The items shaded (

) in the table below are

displayed only in Advanced Setting mode.

Switching between Normal Setting mode and

Advanced Setting mode is performed in RCP Config

(Security → Status) on the OTHERS menu.

Paint menu (with the CCU-TX50)

Paint menu consists of pages 1 to 5.

Paint 4 and 5 can also be selected in sequence by

pressing the PAINT 3 button.

You can select page 1 through 3 directly by pressing

the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.

Pressing vor V of the page selected with a MENU

button flip pages 1 through 5 in sequence.

Page

Submenu

Control item

White Preset

Memory A

Function

Paint 1

White

To retrieve the white balance settings preset by the camera

To retrieve the white-balance settings stored in Memory A. The

retrieved settings can be adjusted in Auto or Manual mode (the

adjusted values are stored in Memory A).

Memory B

ATW

To retrieve the white-balance settings stored in Memory B. The

retrieved settings can be adjusted in Auto or Manual mode (the

adjusted values are stored in Memory B).

To turn ON/OFF the Auto Tracing White function (which

automatically adjusts the white balance when lighting conditions

change)

• R

• B

To adjust the gain of the R signal in the white when Memory A or

Memory B is pressed

To adjust the gain of the B signal in the white when Memory A or

Memory B is pressed

Black

Flare

• R

To adjust the gain of the R signal in the black

To adjust the gain of the B signal in the black

To adjust the master black

• B

• Master

Flare Off

To turn the flare (black level when flare is generated) correction

function ON/OFF

• R

To adjust the amount of flare correction for the R signal

To adjust the amount of flare correction for the G signal

To adjust the amount of flare correction for the B signal

To turn the Auto Knee circuit ON/OFF

• G

• B

Gamma/Knee

Auto Knee

• Gamma

• Blk Gamma

• Knee Point

To adjust the gamma level

To adjust the black gamma level

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

• Knee Slope

To adjust the knee slope (amount of knee correction)

Download from Www.Somanuals.com. All Manuals Search And Download.

Page

Submenu

Control item

• Level

Function

Paint 2

Detail

Detail 1

To adjust the detail (contour correction) level

• H/V Ratio

To adjust the ratio of V (Vertical) detail to H (Horizontal) detail in

detail correction. As the value becomes larger, the V detail ratio

increases.

• Frequency

• Crispening

• Level Dep

• CCS Level

Detail Gate

Skin DTL

To adjust the boost frequency (thickness of contour lines) for the

detail correction

Detail 2

To adjust the crispening level (appropriate level at which details of

noise signals are removed)

To adjust the level dependence (level at which the detail signal starts

being suppressed)

Cross Color

Skin Detail

To adjust the cross color suppress level to suppress the phenomenon

of color jittering or coloring when a minutely striped pattern is shot

To turn ON/OFF the skin gate area (target color range of skin detail

correction or skin matrix adjustment)

To turn the skin detail function (which suppresses the contour

correction in the selected area) ON/OFF

Auto Skin

The unit will go to Standby mode when this button is pressed, and

will automatically start obtaining the skin gate area data when Start

is pressed.

• Level

To adjust the amount of skin detail correction. As the value becomes

larger, the amount of detail in the skin gate area decreases.

• Phase

• Width

• Sat

To adjust the color phase of the designated area

To adjust the color width of the designated area

To adjust the color saturation of the designated area

To adjust the level of the black R gamma

To adjust the level of the black B gamma

To adjust the master black gamma

Black Gamma

Knee/DL

• R

• B

• Master

Auto Knee

• Point

Paint 3

To turn the auto knee ON/OFF

To adjust the level at which the knee correction starts. As the value

becomes larger, the start level decreases, which enhances the knee

correction effects.

• Slope

• R

To adjust the knee slope (amount of knee correction)

To adjust the level of the R gamma

Gamma

Matrix

• B

To adjust the level of the B gamma

• Master

• Hue

• Sat

To adjust the master gamma

Matrix 1

To adjust the hue of the linear matrix

To adjust the color saturation of the linear matrix

• Matrix

To select the Matrix Adjustment mode

STD: Standard

FL: For shooting under fluorescent light

High Sat: High saturation (increasing the saturation of primary

colors)

Matrix 2

Matrix 3

• R-G/• G-B/• B-R

To adjust the color tone for the R–G, G–B, or B–R elements of the

matrix

• Matrix

To select the Matrix Adjustment mode

• R-B/• G-R/• B-G

To adjust the color tone for the R–B, G–R, or B–G elements of the

matrix

• Matrix

Skin Matrix

• Hue

To select the Matrix Adjustment mode

Skin Matrix

To select the skin matrix function ON/OFF

To adjust the hue of the designated area

To adjust the color saturation of the designated area

• Sat

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

Page

Submenu

Control item

Function

Paint 4

White Clip

• Master

To adjust the amount of white clip (the highest white level). As the

value becomes larger, the output level decreases.

TLCS

To turn the TLCS (total level control) function ON/OFF

• AGC/C.Point

To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris

control is switched to AGC (auto gain control)

• AGC/Limit

• AE/C.Point

To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/

18 dB) adjustment

To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris

control is switched to the AE (auto exposure)

• AE/Limit

STD

To set the upper limit value for AE control (100/150/200/250)

To select the standard auto iris mode

Auto Iris

Spot Light

Back Light

TLCS

To select the auto iris mode for shooting spot-lit subjects

To select the auto iris mode for shooting back-lit subjects

To turn the TLCS (total level control) function ON/OFF

To turn the shutter function ON/OFF

CLS/EVS

Shutter

CLS

To turn the CLS (clear scan) function (which reduces noise on the

horizontal scan lines when the monitor screen connected to a PC is

shot) ON/OFF

EVS

To turn the EVS mode (which reduces flicker by increasing the

vertical resolutions) ON/OFF

• Shutter

• CLS

To select the shutter speed

To adjust the CLS frequency

To adjust the low key saturation level

Paint 5

Low Key Sat

Auto Knee

• Level

Adaptive

To turn ON/OFF the function that makes the knee correction slope

smooth to make the gradation natural

Download from Www.Somanuals.com. All Manuals Search And Download.

Function menu (with the CCU-TX50)

Control item

Jump menu 1

Jump menu 2

Jump menu 3

Jump menu 4

Function

Operation

To jump to the adjustment screen designated for Menu 1 in Menu Set ^a)(Default: White of Paint 1)

To jump to the adjustment screen designated for Menu 2 in Menu Set ^a)(Default:Black of Paint 1)

To jump to the adjustment screen designated for Menu 3 in Menu Set ^a)(Default: Flare of Paint 1)

To jump to the adjustment screen designated for Menu 4 in Menu Set ^a)(Default: Gamma/Knee

of Paint 1)

Jump menu 5

Jump menu 6

To jump to the adjustment screen designated for Menu 5 in Menu Set ^a)(Default: Detail of Paint 2)

To jump to the adjustment screen designated for Menu 6 in Menu Set ^a)(Default: Skin Detail of

Paint 2)

Jump menu 7

To jump to the adjustment screen designated for Menu 7 in Menu Set ^a)(Default: Matrix of Paint

Shutter

To turn the shutter function ON/OFF

• Shutter

CLS

To select the shutter speed

To turn the CLS (clear scan) function ON/OFF

To select the CLS frequency

• CLS

TLCS

To turn the TLCS (total level control) function ON/OFF

To select the master gain value among –3/0/3/6/9/12/18/24/30/36 dB

To turn the color temperature 5600K ON/OFF

To turn the skin detail function ON/OFF

• Master Gain

5600K

Skin Detail

Detail Gate

To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail

correction or the skin matrix adjustment)

ATW

To turn the ATW (auto tracing white balance) function (which automatically adjusts the white

balance when lighting conditions change) ON/OFF

TLCS

To turn the TLCS (total level control) function ON/OFF

To turn the Auto Knee function ON/OFF

To turn the skin matrix function ON/OFF

To turn the flare correction function ON/OFF (OFF while the button is lit)

To turn the option control function 1 ON/OFF

To turn the option control function 2 ON/OFF

To adjust the focus

Auto Knee

Skin Matrix

Flare Off

Option 1

Option 2

• Focus ^c)

• Zoom ^c)

• Pan ^d)

Lens/Pan ^b)

To adjust the zoom

To adjust panning of the tripod head

• Tilt ^d)

To adjust tilting of the tripod head

a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.

b)The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.

c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.

In addition, special settings must be made on the connected CA-TX50. For details, consult your Sony dealer.

d)To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.

In addition, special settings must be made on the connected CA-TX50. For details, consult your Sony dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

OTHERS menu (with the CCU-TX50)

2ndary menu Submenu

Control item

Function

Adjusting

White Shading

• R

To adjust the V white shading (vertical variation of the white) of the

R signal

• G

To adjust the V white shading of the G signal

To adjust the V white shading of the B signal

To select the Screen mode (4:3/16:9)

• B

Camera

Config

Screen Mode ^a)

Scene Trans

Screen Mode

File

CAM->MS

MS->CAM

• Call

To transfer a scene file (from the camera to the Memory Stick)

To transfer a scene file (from the Memory Stick to the camera)

To set the volume of the call buzzer

RCP Config RCP

Adjusting

Buzzer

Volume

• Touch

To set the responding sound volume of the touch panel

• Switch

To set the confirmation sound volume of the self-illuminating

switches

• Master

To set the total buzzer sound volume

Call Buzzer

Touch Click

SW Click

All Off

To turn the call buzzer ON/OFF

To turn the responding sound of the touch panel ON/OFF

To turn the confirmation sound of switches ON/OFF

To turn the volume of all the buzzers ON/OFF

To set the brightness of respective LEDs

LED Bright

• Switch

• Tally

• Other

• Master

To set the brightness of the all LEDs of the unit

RE Setting

VR Setting

BLACK/FLARE

To select the function for the BLACK/FLARE knob

Black: Black balance adjustment

Flare: Flare balance adjustment

VR STD Mode

To select the initial settings for IRIS or MASTER BLACK

adjustment mode: Absolute or Relative

VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value

adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest

response position)

M. Black VR

(Only available for RCP-D50) To select the response rate of the

MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,

and 1/4, where 1/1 is the quickest response position)

Information

Cable Comp

SW Setting

To display the software version of the unit

Cable Length

To set the length of the remote cable (5 m/25 m/50 m)

• SW Assign/Sel

To allocate a function to the ASSIGN button

No Assign: No assignment

Black/Flare: Switching the function of the BLACK/FLARE knobs

Black Auto: ON/OFF of the auto black (Not operative)

ATW: ON/OFF of the auto tracing white balance

TLCS: ON/OFF of the total level control function

DynaLatitude: ON/OFF of the DynaLatitude function (Not operative)

CCU character: Switching the CCU-TX50 character pages

CAM No.

CAM ID->No.

• No.

To switch the display of the camera number/tally indication of the

unit between camera ID and camera number ^b)

To select the camera number to be displayed on the RCP

a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.

b) Camera ID cannot be displayed when connected to the CCU-TX50.

Download from Www.Somanuals.com. All Manuals Search And Download.

2ndary menu Submenu

Control item

• Year

Function

RCP Config Date/Time

Date

Date adjustment of the clock built into the unit

(cont.)

Set

• Month

• Day

Set

Cancel

Time

• Hour

Time adjustment of the clock built into the unit

• Minute

• Second

Set

Cancel

Comm Type

Security

Protocol Type ^a)

To set the connection mode

P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,

CCU-D50, DSR-300/370/390/500/570

P Type 7: When connected to CCU-TX50

Engineer Mode

Status ^b)

To set whether to display “Status”, “Menu Set”, and “Code No.” or

not (With Engineer Mode ON, all operative menu items are

displayed regardless of the Advance Mode setting.)

Advance Mode

To switch between the Normal Setting mode and Advanced Setting

mode of the menu

Screen Md Enable

Pan/Tilt Enable

Power On Active

To set whether switching between 4:3 and 16:9 is enabled or not

To set whether panning/tilting adjustment is enabled or not

To specify the Panel Active and Iris/Master Black Active statuses

when the unit is started up

Full Active: To set the unit to the Panel Active status when started up

IRIS/M.Black: To set the unit to the Iris/Master Black Active

status when started up

Lock: To set the unit to the Panel Lock status when started up

Keep state: To set the unit to the previous state when started up

Panel Active Lock

To set whether to use the Panel Active Lock function with a security

code or not.

Disable: Not to use the Panel Active Lock function

Enable: To use the Panel Active Lock function by specifying a

new security code

Enable (Engineer Code): To use the Panel Active Lock function

with the same security code as that for Engineer Mode

Code Change

To change the security code for Panel Active Lock (displayed only

when a security code for Panel Active Lock has been set)

Menu Set ^b)

Code No. ^b)

To select an item to be displayed on the function menu. Select the

number (1-7) using • Cur, and select the item with • Sel: White,

Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black

STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White

Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump

Code No.

To enable/disable the security code setting for Engineer Mode

Code Change

To change the security code for Engineer Mode (displayed only

when a security code for Engineer Mode has been set)

a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.

b) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Menu Configuration and Basic Menu Operations

2ndary menu Submenu

Control item

• Bright

Function

LCD

(cont.)

LCD Brightness/Contrast

To set the brightness of the LCD of the unit

To set the contrast of the LCD of the unit

• Cont

LCD Moni. LCD Monitor

Brightness/Contrast

• Bright

To set the brightness of the LCD of the unit when displaying the

camera picture

• Cont

To set the contrast of the LCD of the unit when displaying the

camera picture

Memory Stick Memory Stick

Format

To perform formatting of the Memory Stick

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

RCP Config. Menu

Setting the Operating Conditions

of the RCP-D50/D51

Exit

RCP

Adjusting

Setting

By using the RCP Config menu or LCD setting

display, you can set the built-in clock of the RCP-D50/

D51 and adjust various conditions of the RCP-D50/

D51, such as the sound volume of the warning buzzer

and the brightness of the indicators and LCD.

Cable

Comp

Setting

Camera

No.

Date

Time

Secu-

rity

To obtain the LCD setting display, press [LCD].

Displaying the RCP Config menu/LCD

setting display

The LCD setting display (page 48) appears.

Proceed as follows:

Setting the Built-in Clock

The RCP-D50/D51 has a built-in clock to record the

date and time when scene files are saved to Memory

Sticks.

PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS FUNCTION MONITOR

To set the clock, proceed as follows:

Others Menu

Camera

1 Press the OTHERS button in the Menu operation

block so that the OTHERS menu is displayed on

the LCD, then press [RCP Config] to call the RCP

Config menu.

Adjusting

File

Config

RCP

Config

Memory

Stick

LCD

Moni.

2 Set the menu to Advanced Setting mode.

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

MONITOR

BRIGHT

CONTRAST

The [Status], [Menu Set], and [Code No.]

buttons are displayed.

3)Press [Status].

The Security Status menu appears.

4)Press [Advance Mode].

1 Press to light the OTHERS button of the menu

operation block.

The OTHERS menu appears.

3 Press [Date/Time] on the RCP Config menu.

The current setting is displayed on the Date/Time

Set menu.

2 To display RCP Config menu, press

[RCP Config].

The RCP Config menu appears.

Date Time Set Menu

Exit

2001/11/17

(Sat)

22:12:31

Date

Time

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

4 To set the date:

Adjusting the Buzzer Sound

1)Press and light [Date].

A buzzer sounds on the RCP-D50/D51 when it

receives call signal or a panel control is operated.

When required, you may turn on/off the buzzer or

adjust the sound volume.

Date Time Setting

Exit

2001/11/17

(Sat)

22:12:31

To adjust the buzzer, proceed as follows:

1 Press [RCP Adjusting] on the RCP Config menu.

Date

Year

Time

Set

Day

Cancel

Month

The RCP adjustment menu appears.

2001

Clear

Exit

Buzzer

Volume

LED

Bright

2)Set the Year, Month and Day with the left three

control knobs.

3)Press [Set].

The set date becomes valid.

To restore the previous setting, press [Cancel]

instead of [Set].

5 To set the time:

2 Press and light [Buzzer Volume].

1)Press and light [Time].

The lower half of the display becomes the Buzzer

Volume adjustment display.

Date Time Setting

Exit

Clear

Exit

2001/11/17

(Sat)

22:12:31

Buzzer

Volume

LED

Bright

Date

Hour

Time

Minute

Set

Second

Cancel

Buzzer

Volume

Call

Touch

Click

All

Buzzer

Off

Call

Touch

Switch

Master

2)Set the Hour, Minute and Second with the left

three control knobs.

3)Press [Set] in synchronization with a time

signal.

3 Adjust the levels with the corresponding control

knobs (50 is the standard value with all items).

Call: Sound volume of the buzzer when a call

signal is received

The set time becomes valid.

To resume the previous setting, press [Cancel]

instead of [Set].

Touch: Sound volume of the buzzer when a

button displayed on the menu display is operated

Switch: Sound volume of the buzzer when a

button on the panel is operated

The master volume can be adjusted with the

rightmost control knob (Master).

When the clock setting is completed

Press [Exit] to leave the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

To turn on/off the buzzers independently

Press the corresponding button. When it is lit, the

buzzer is on.

[Call Buzzer]: For the buzzer sound when a call signal

is received

lamps, including the master black indicator and

f-number indicator

The master brightness can be adjusted with the

rightmost control knob (Master).

[Touch Click]: For the buzzer sound when a button

displayed on the menu display is operated

[SW Click]: For the buzzer sound when a button on

the panel is operated

When the adjustment is completed

Press [Exit] to leave the menu.

Changing the Functions of the

Rotary Encoders

To turn off all the buzzers

Press and light [All Off].

You can change the functions of BLACK/FLARE

control knobs.

Proceed as follows:

When the adjustment is completed

Press [Exit] to leave the menu.

1 Press [RE Setting] on the RCP Config menu to

Adjusting the Brightness of the

LEDs

obtain the Rotary Encoder Setting display.

RCP Config Menu

Exit

RE Setting

You can adjust the brightness of the LEDs of the panel

buttons and camera number/tally indication window.

To adjust the brightness, proceed as follows.

Rotary Encoder

Setting

1 Press [RCP Adjusting] on the RCP Config menu to

display the RCP adjustment menu.

BLACK / FLARE

Black

Flare

2 Press and light [LED Bright].

The lower half of the display becomes the LED

Brightness adjustment display.

2 When changing the function of the BLACK/

FLARE control knobs, press [Black] or [Flare] as

desired.

Clear

Exit

Buzzer

Volume

LED

When the adjustment is completed

Press [Exit] to leave the menu.

Bright

LED

Brightness

Switch

Tally

Other

Master

3 Adjust the brightness with the corresponding

control knobs (50 is the standard value with all

items).

Switch: Brightness of the built-in LEDs of the

control buttons

Tally: Brightness of the built-in LEDs of the

camera number/tally indication window

Other: Brightness of the other LED indicators/

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

2 Set the menu to Advanced Setting mode.

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

Adjusting the Brightness/

Contrast of the LCD

You can adjust the brightness and contrast of the

display of the menu control block.

Proceed as follows:

The [Status], [Menu Set], and [Code No.] buttons

are displayed.

3)Press [Status].

1 Press [LCD] on the OTHERS menu to display the

The Security Status menu appears.

4)Press [Advance Mode].

LCD setting display.

Clear

Exit

3 Press [SW Setting] on the RCP Config menu to

obtain the SW Setting display.

LCD Brightness

/Contrast

RCP Config Menu

Exit

SW Setting

Bright

Cont

SW Assign

NoAssign

Black/Flare

BlackAUTO

ATW

TLCS

DynaLatitude

Sel

2 Adjust Bright and Cont (5 is the standard value

with both items).

To adjust the brightness and contrast for

camera pictures

4 Turn the second left control knob (Sel) to highlight

the function to be assigned.

NoAssign (default): No assignment

Black/Flare: Switching the function of the

BLACK/FLARE knobs

1 Press [LCD Moni.] on the OTHERS menu to

display the LCD setting display.

Black AUTO: ON/OFF of the auto black

ATW: ON/OFF of the auto tracing white balance

TLCS: ON/OFF of the total level control function

DynaLatitude: ON/OFF of the DynaLatitude

function

2 Adjust Bright and Cont (5 is the standard value

with both items).

When the adjustment is completed

Press [Exit] to leave the menu.

Note

Some functions may be unoperative, depending on the

connected camera.

Assigning a Function to the

ASSIGN Button

When the assignment is completed

Press [Exit] to leave the menu.

You can assign a function to the ASSIGN button.

Note that the assignable functions depend on the

connected camera.

Proceed as follows:

1 Press the OTHERS button in the Menu operation

block so that the OTHERS menu is displayed on

the LCD, then press [RCP Config] to call the RCP

Config menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

If you enter an incorrect security code, the message

“!!!Code No. NG!!!” is displayed.

Specifying the Security Codes

You can authorize specific persons to set the menu to

Engineer mode, to operate this panel, and to adjust the

iris and master black by specifying a security code.

When you enter the correct security code, the

Security Code setting display is resumed with

highlighted [Enable] and additional [Code

Change].

Locking Engineer mode with a security

code

After this setting, the Security Code input display

appears when you press [Engineer Mode] of the

Security menu.

1 Press the OTHERS button in the Menu operation

block so that the OTHERS menu is displayed on

the LCD, then press [RCP Config] to call the RCP

Config menu.

Releasing the security code lock of

Engineer mode

2 Set the menu to Engineer mode.

1 When a security code for Engineer mode has been

set, operate in the same manner as step 1 through

step 4 in “Locking Engineer mode with a security

code.”

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

The [Status], [Menu Set], and [Code No.] buttons

are displayed.

The Security Code input display appears.

2 Enter the security code and press [Enter].

The security code lock is released.

3 Press [Code No.].

The Security Code setting display appears.

4 Press [Enable].

Locking panel operations, iris/master

black adjustments menu with a security

code (Panel Active Lock)

The Security Code input display now appears and

“Input New Code No.” is displayed.

1 Press the OTHERS button in the Menu operation

block so that the OTHERS menu is displayed on

the LCD, then press [RCP Config] to call the RCP

Config menu.

5 Enter a security code and press [Enter].

Use [0] to [9] to enter the security code (up to 8

digits).

2 Set the menu to Engineer mode.

Asterisks, each representing one digit of the

entered security code, are displayed in the upper

New Code No. box.

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

The [Status], [Menu Set], and [Code No.] buttons

Press [Back Space] to cancel previous input one at

are displayed.

a time.

3 Press [Status].

When you press [Enter], the message “Input Again

to Confirm” is displayed.

The Security Status menu appears.

6 Enter the security code again and press [Enter].

4 Press B to display the second page and press

[Enable].

Asterisks, each representing one digit of the

entered security code, are displayed in the lower

New Code No. box.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Settings

The Security Code input display appears.

(Pressing [Enable $ENG Code%] registers the same

security code as Engineer mode for Panel Active

Lock.)

2 Press B to display the second page and press

[Disable].

The security code is disabled.

5 Operate in the same manner as step 5 and step 6 in

Changing a security code

“Locking Engineer mode with a security code.”

1 Press [Code Change] on the Security Code setting

The Security Status menu is resumed with

highlighted [Enable] and additional [Code

Change].

display.

The Security Code input display appears and the

message “Input Old Code No.” is displayed.

After this setting, when you hold the PANEL ACTIVE

button pressed for more than 2 seconds, the message

“!!Panel Locked!!” is displayed and the panel is

locked.

When the panel is locked, the Security Code input

display appears when you press the PANEL ACTIVE

or IRIS/M. BLACK ACTIVE button.

If the correct security code is not entered, the lock is

not released.

2 Enter the current security code and press [Enter].

Asterisks, each representing one digit of the

entered security code, are displayed in the Old

Code No. box.

When you press [Enter], the message “Input New

Code No.” is displayed.

Notes

3 Enter a new security code and press [Enter].

• If no security code has been set for Engineer mode,

[Enable $ENG Code%] is not displayed.

• When the panel is locked with a security code, the

panel lock is not released even when power to this

unit is shut off.

The message “Input Again to Confirm” is

displayed.

4 Enter the new security code again and press

The panel lock is released when you select Engineer

mode.

[Enter].

• When the panel is locked with a security code, only

Security from RCP Config can be selected in the

OTHERS menu.

The new security code becomes valid.

Note

• If you specify a security code only for Panel Active

Lock without setting a security code for Engineer

mode, Engineer mode is also locked with the security

code for Panel Active Lock when the panel is locked.

If no security code has been set, [Code Change] is not

displayed.

If you forget the specified security code(s)

Disabling the security code for Panel

Active Lock

1 Shut down power to the unit, then reapply power

while holding the MASTER and CLOSE buttons

pressed.

1 When Panel Active Lock has been enabled, operate

in the same manner as step 1 through step 3 in

“Locking panel operations, iris/master black

adjustments menu with a security code (Panel

Active Lock).”

The confirmation display for canceling the

securing code appears.

2 Press [OK].

The Security Code input display appears.

The message “Code No. cleared” is displayed, and

the security code settings are canceled.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Operations

This unit can operate two types of files: scene files and

setup files.

The table below shows the setting items which can be

registered as either of the files.

Setting data of cameras can be registered as scene files

or setup files and recalled as required.

Setup file

Scene file

Setting item

DXC-D30/D35

series only

DXC-D30/D35

series

DXC-D50

series

DXC-637

series

Selecting shooting picture or color bars

Master black

yes

Iris

Auto iris mode

yes

Master gain

TLCS

Upper limit value for AGC

Initial F-stop value for AGC

Initial F-stop value for AE

Shutter/Clear scan

yes

Shutter speed

Clear scan frequency

Filter position

Selecting white balance or black balance adjustment

ATW ON/OFF

yes

R/B white balance adjustment

R/B black balance adjustment

Flare correction ON/OFF

R/G/B flare correction

Detail correction ON/OFF

Detail level

yes

Detail boost frequency

Crispening level

Level dependence value

Detail H/V

V-detail limit value

Highlight detail

After gamma detail

Aperture correction ON/OFF

Aperture correction value

Knee aperture correction ON/OFF

Knee aperture correction value

Cross color suppress value

R/G comb filter ON/OFF

Knee correction mode

Master knee point

yes

Master knee slope

White clip circuit ON/OFF

White clip value

yes

Download from Www.Somanuals.com. All Manuals Search And Download.

File Operations

Setup file

Scene file

Setting item

DXC-D30/D35

series only

DXC-D30/D35

series

DXC-D50

series

DXC-637

series

Gamma correction on/off

Master gamma

yes

R/B gamma

Master black gamma

R/B black gamma

Gamma initial gain

yes

Black stretch level

Upper/lower limit value for black stretch

Upper/lower limit value for black compress

DynaLatitude effect

Matrix adjustment ON/OFF

Saturation/hue

yes

Matrix adjustment mode

Matrix parameter (R-G, R-B, G-R, G-B, B-R, B-G)

Skin detail level

yes

Skin matrix saturation/hue

Skin gate position/size

Position/size of skin gate detect window

EVS

yes

Low Key saturation

Focus/zoom

yes

Pan/tilt

ON/OFFselection of optional control 1 or 2

Download from Www.Somanuals.com. All Manuals Search And Download.

If the scene file button corresponding to the

memory cell in which you wish to store data is not

displayed, press either the v or V button at the

lower-right position. You can change the scene file

buttons by 5, in the order of [1] to [5], [6] to [10],

[11] to [15], and [16] to [20]. You can also change

the buttons one by one. When the knob at the

leftmost position (Page) is turned clockwise,

larger-numbered buttons are displayed one by one.

When the knob is turned counterclockwise,

smaller-numbered buttons are displayed in turn.

Operating Scene Files

Scene files are stored in the memory of this unit (or of

the camera when using the DXC-D50-series camera).

Among the setting items listed in the table on pages 51

and 52, the settings for those items that have “yes” in

the scene-file column can be stored as a scene file. Up

to 20 scene files can be registered and retrieved as

required. To register or retrieve scene files, use the

Scene File Operation menu.

The selected file number is displayed above the

filename input box.

Registering a scene file

Use the Scene File Operation menu for storing a scene

file, in the following manner:

Retrieving a scene file

1 Make the adjustment for the setting items that have

“yes” in the scene-file column in the table on pages

51 and 52, until the values you wish to store are

obtained.

Use the Scene File operation menu for retrieving a

scene file.

1 Press the SCENE button in the menu operation

block to display the Scene File Operation menu on

the LCD.

2 Press the SCENE button in the menu operation

block to display the Scene File operation menu on

the LCD.

2 Press either the v or V button, or turn the knob at

the leftmost position (Page) until the file button

corresponding to the desired file is displayed.

Scene Files

Store

3 Press the button corresponding to the scene file to

be retrieved.

Scene 1 : STUDIO1

Scene 2 : DXC-D30

Scene 3 : TEST 002

Scene 4 :

Scene :

DXC_D

The selected scene file is retrieved, and the settings

of the camera are replaced with the data of the

retrieved file.

Scene 5 :

Page

Char

Cur

3 Press [Store].

4 Enter a filename (up to eight characters) in the

filename input box.

Moving the cursor: Turn the rightmost knob

(Cur) until the cursor comes to the position

where you wish to enter a character.

Selecting a character: Turn the second knob

(Char) from the left until the character which

you wish to enter appears.

5 Press a scene file select button (1 to 20)

corresponding to the memory cell in which you

wish to store the setting data.

Download from Www.Somanuals.com. All Manuals Search And Download.

File Operations

Reading the scene files from a Memory

Stick

Transferring Scene Files between

the Camera and a Memory Stick

(with the DXC-D50 Series)

Proceed as follows:

1 Insert the Memory Stick (see page 59).

When a DXC-D50-series camera is connected, the

registered scene files can be stored as a data block and

can be read when required.

2 Operate in the same manner as when you stored

the files until the Scene File Transfer display

appears.

Storing the scene files on a Memory Stick

3 Press [MS -> CAM].

Proceed as follows:

A confirmation display appears.

1 Insert the Memory Stick (see page 59).

4 Press [Start].

The scene files are transferred from the Memory Stick

2 Press the OTHERS button in the Menu operation

block so that the OTHERS menu is displayed on

the LCD, then press [RCP Config] to call the RCP

Config menu.

to the connected camera.

When the transfer is finished

The termination message “COMPLETED” appears.

3 Set the menu to Advanced Setting mode.

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

The [Status], [Menu Set], and [Code No.]

buttons are displayed.

3)Press [Status].

The Security Status menu appears.

4)Press [Advance Mode].

4 Return to the OTHERS menu, and press [File].

5 Press [File Trans].

The Scene File Transfer display appears.

6 Press [CAM -> MS].

A confirmation display appears.

7 Press [Start].

The registered scene files are transferred to the

Memory Stick.

When the transfer is finished

The termination message “COMPLETED” appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Press [Store].

Operating Setup Files (for DXC-

D30/D35 Series only)

The current settings of the camera are stored as a

setup file with the name entered in Step 4, and that

filename is displayed on the list.

Among the setting items listed in the table on pages 51

and 52, the settings for those items that have “yes” in

the Setup-file column are stored as a setup file in the

memory of the camera. In addition to five files

Retrieving a setup file

(PRESET 1 to PRESET 5) that have already been

registered in the camera, three more files (USER 1 to

USER 3) can be registered and retrieved as required.

1 Call the Setup File operation display, then turn the

knob at the leftmost position (Sel) to select the file

you wish to retrieve from among PRESET 1 to

PRESET 5 (preset files 1–5) and USER 1 to USER

3 (user’s registration files 1–3) from the list.

To register or retrieve setup files, use the Setup File

operation display.

2 Press [Recall].

Registering a setup file

The selected file is retrieved, and the settings of the

camera are replaced with the data of the retrieved

file.

1 Press the OTHERS button in the menu operation

block to display the OTHERS menu on the LCD,

then press [File] to call the File menu.

2 Press [Setup File].

The Setup File operation display appears.

Setup Files

Exit

PRESET 1 : STD

PRESET 2 : HISAT

PRESET 3 : FL

Recall

PRESET 4 : FILMLIKE

PRESET 5 : SVHS/VHS

USER 1 : USER 1

USER 2 : USER 2

USER 3 : USER 3

Sel

DXC_D

Store

Cur

Char

3 Turn the knob at the leftmost position (Sel) to

select a file to which you wish to register data

among USER 1 to USER 3 (user’s registration files

1-3) from the list.

4 Enter a filename (up to eight characters) in the

filename input box.

Moving the cursor: Turn the rightmost knob

(Cur) until the cursor comes to the position

where you wish to enter a character.

Selecting a character: Turn the second knob

(Char) from the right until the character which

you wish to enter appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

Skin Detail Correction/Skin Matrix Adjustment (for

DXC-D30/D35/D50 Series Only)

The skin detail and skin matrix functions can adjust

detail level and matrix (saturation and hue) of a

selected skin gate area (area designated by color

range).

Once a skin gate area has been selected, it can be used

as a target for both skin detail correction and skin

matrix adjustment, and activation of each function can

be performed independently.

If you power off the unit or store the current

settings as a scene file while setting the detail level

to the minimum value, the skin detail function will

be set to off when you power on the unit or recall

the scene file next time.

To store the skin detail settings

Set the SKIN DETAIL button on before powering off

the unit or storing the settings as a scene file. If the

button is off, the skin detail settings will not be stored.

Selecting the skin gate area

Normally, use the SKIN DTL SETUP button of the

AUTO SETUP block to designate the skin gate

position (target color) automatically.

Performing skin matrix adjustment

Follow the procedure described below to adjust the

matrix (saturation and hue) of the skin gate area.

1 Press and light the SKIN DTL SETUP button

1 Select [Skin Matrix] in Paint menu 3.

(ON).

2 Set [Skin Matrix] to ON.

The window which shows the skin gate and target

area appears in the camera’s viewfinder.

You can also see the skin gate with a picture

output from the CCU’s PIX connector.

3 Set the saturation and hue using the leftmost

control knob (Hue) or the second control knob

(Sat) from the left.

2 Press the START button.

Selecting 00 causes the same situation as the skin

matrix function is set off.

The skin gate is designated automatically.

If you power off the unit or store the current

settings as a scene file while selecting 00, the skin

matrix function will be set to off when you power

on the unit or recall the scene file next time.

When using a DXC-D30/D35-series camera, you can

manually adjust the position of the designated skin

gate in Paint menu.

Note

When using the DXC-D30 series, this adjustment is

valid when the matrix adjustment function is active.

Performing skin detail correction

By skin detail correction, you can lower the detail level

of the skin gate area to the detail level outside of the

area.

To store the skin matrix settings

Activate both the matrix adjustment and skin matrix

adjustment functions before powering off the unit or

storing the settings as a scene file. Otherwise, the skin

matrix settings will not be stored.

1 Press and light the SKIN DETAIL button (ON).

2 Select [Skin Detail] in Paint menu 2.

3 Set the detail correction level using the leftmost

control knob (Level).

Setting the level to the max. value (+99): The

detail level of the area is set to the lowest level.

Setting the level to the min. value (0): The detail

level of the area is set to the same level with the

outside of the area. (The same situation as the

skin detail function is set to off.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Multi-Camera Control

Connections and Preparatons

Adjusting the Iris/Master Black

of Multiple Cameras at One Time

In a multi-camera system, connecting all the CCU-

TX7 units via the RS232C connectors allows one RCP

unit selected from all the RCP units in the system to

control the multiple cameras.

If the selected unit is set as the master unit and the rest

are set as slave units, the setting data of the camera

connected to the master unit can be transferred to other

cameras.

For iris and master black adjustments, you can use any

one of the RCP units (whether it is the master unit or a

slave unit) specified with the IRIS/M.BLACK LINK

button.

1 Select the cameras for which you will adjust the

iris or master black by pressing the IRIS/

M.BLACK LINK buttons on the connected RCP

units. (The buttons light when pressed.)

To make connections among the CCU-TX7

units

Connect RS-232C cross (or reverse) cables with D-sub

25-pin plugs (not supplied) to the RS232C connectors

on each CCU to make a daisy chain of the CCUs.

2 Adjust the iris or master black on one RCP unit

whose IRIS/M.BLACK LINK button lights.

For more information about cables which can be used,

consult your Sony dealer.

On the cameras connected to the RCP units whose

IRIS/M.BLACK LINK buttons light, the iris or

master black adjustments are performed by the

same amount and at the same time (on relative

mode).

Notes

• It is impossible to assure that all the cameras can be

set up to the same conditions under the multi-camera

control. Setting purposes and the current condition of

each camera may cause variation of the setting

condition.

Note

The IRIS/M.BLACK LINK function is released while

transferring the scene files.

• In a system which contains more than two types of

cameras, the setting items, adjustment range and

adjustment accuracy available at the multi-camera

operation are determined depending on the efficiency

of the camera connected to the master unit.

• There are two setting modes: Absolute mode and

Relative mode.

Data Transfer Among Multiple

Cameras

The settings made on the master unit can be transferred

to the cameras connected to the slave units, if they can

be registered as a scene file.

• Settings performed on a slave unit are valid only to

the connected camera.

Perform as follows:

Setting a unit to the master unit or a slave

unit

1 Select [File] from the OTHERS menu, and press

[Copy to Slaves].

Note

Perform the following procedure after making sure all

the cameras in the system are powered on. Note that

executing the procedure when there is any cameras

powered off may result in failure.

2 Press [Start].

Data transfer begins.

Meanwhile, on all the linked RCP units (including

units selected as neither the master unit nor slave

units), the message “IN PROGRESS” is displayed on

the LCD and all buttons and knobs are locked.

1 Select one RCP unit for the master unit, and press

the MASTER button. (The button lights when

pressed.)

When the data transfer completes, the message

“COMPLETED” appears on the LCD. The LCD soon

returns to the original status.

2 Select one RCP unit (or more) for a slave unit, and

press the SLAVE button. (The button lights when

pressed.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Multi-Camera Control

Notes

• The command link adjustment of R/G/B flare

correction is available only with the DXC-D30/D35/

D50 series.

• While scene file transfer is in progress on a slave

unit, do not tranfer data from the master unit to the

slave unit. Scene file transfer will fail.

• The master/slave setting is released while transferring

the scene files.

Activating command link adjustments/

settings

1 Press the OTHERS button in the Menu operation

block so that the OTHERS menu is displayed on

the LCD, then press [RCP Config] to call the RCP

Config menu.

Operating Multiple Cameras from

One RCP Unit —Command Link

Command link allows one RCP selected as the master

unit to control the adjustments or settings of the

cameras connected to the slave units.

To perform command link operation, activate the

command link on the Command Link operation

display on the master unit.

2 Set the menu to Advanced Setting mode.

1)Press [Security] on the RCP Config menu.

2)Press and highlight [Engineer Mode].

The [Status], [Menu Set], and [Code No.]

buttons are displayed.

Note

3)Press [Status].

The Command Link operation display can be

displayed from the RCP Config menu only in

Advanced Setting mode.

The Security Status menu appears.

4)Press [Advance Mode].

3 Return to the RCP Config menu, and press

Command Link items

[Comm Link].

• Gain setting (Absolute mode)

• Shutter settings (Absolute mode)

- Shutter on/off

The Command Link Items are displayed.

- Clear scan mode on/off

- EVS function on/off

RCP Config Menu

Exit

Command Link Item

- Shutter speed

- Clear scan frequency

R/B

White

Gain

• R/B manual white balance adjustment (Relative

mode)

R/B

Shutter

Black

• R/B manual black balance adjustment(Relative

mode)

R/G/B

Flare

• R/G/B manual flare correction (Relative mode)

Notes

• Do not perform command link operation in a system

containing multiple cameras of different types. If the

camera connected to a slave unit is different in type

from the camera connected to the master unit,

changing the gain value on the master unit will set the

gain value of the camera connected to the slave unit

to 0 dB or the LOW position. The CLS frequency

does not exceed the limit for the camera.

4 Press and highlight the button for the item for

which you wish to activate the command link.

5 Press [Exit] to leave the menu.

When you adjust the item for which you wish to

activate the command link on the master unit, the

adjustment becomes valid on the cameras

connected to the slave units.

• When adjusting the white balance, black balance and

flare with the command link, select Manual

Adjustment mode for white balance, black balance

and flare also on slave units.

Download from Www.Somanuals.com. All Manuals Search And Download.

Memory Sticks

Using a Memory Stick

Notes on Memory Stick

When a Memory Stick is inserted in the panel, the file

data can be stored on the Memory Stick, which

enables you to share data among RCPs.

On Memory Stick

Memory Stick is a new compact, portable and

versatile IC recording medium with a data capacity

that exceeds that of a floppy disk. Memory Stick is

specially designed for exchanging and sharing digital

data among Memory Stick compatible products.

Because it is removable, Memory Stick can also be

used for external data storage.

Inserting a Memory Stick

Insert a Memory Stick with the label side to the left

into the Memory Stick slot until it clicks and the

access lamp lights in red.

Types of Memory Stick

Label side

There are two types of Memory Stick: “MagicGate

Memory Stick” that are equipped with the MagicGate

Stick.” You can use either type of Memory Stick with

your camera. However, because your camera does not

support the MagicGate standards, data recorded with

your camera is not subject to MagicGate copyright

protection.

Access lamp

Memory Stick

EXT

On MagicGate

MagicGate is copyright-protection technology that

uses encryption technology.

Note

Structure of Memory Stick

Never insert/remove a Memory Stick while the access

lamp is lit in red.

Terminal

To remove a Memory Stick

If you push the inserted Memory Stick, the Memory

Stick will pop out a little. Then pull the Memory

Stick out.

Write-Protect tab

Access lamp

The access lamp shows the status of the Memory

Stick.

Off: No Memory Stick is inserted.

Lit in green: There is a Memory Stick in the slot. In

this condition, you can safely eject the Memory

Stick.

Labeling position

You cannot record or erase data when the write-protect

tab on the Memory Stick is set to LOCK.

Lit in red: Data are being read/written. If you eject

the Memory Stick in this condition, the data are

not guaranteed. All the data may be lost.

We recommend backing up important data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Memory Sticks

Handling of Memory Stick

• Image data may be damaged in the following cases:

– If you remove the Memory Stick, or turn the power

off when the access lamp is lit in red

– If you use a Memory Stick near static electricity or

a magnetic field

We recommend backing up important data.

• Prevent metallic objects or your finger from coming

into contact with the terminal of the connecting

section.

• Do not attach any material other than the supplied

label to the label space.

• Attach the label at the prescribed labeling position.

Make sure the label is attached at the labeling

position properly.

• Do not bend, drop, or apply strong shock to a

Memory Stick.

• Do not disassemble or modify a Memory Stick.

• Do not let the Memory Stick get wet.

• Do not use or keep a Memory Stick in locations that

are:

– Extremely hot such as in a car parked in the sun

– Under direct sunlight

– Very humid or subject to corrosive gases

• When you carry or store a Memory Stick, keep it in

its case.

• Memory Sticks of the sizes that can be used with the

RCP-D50/D51 may not be used with some cameras.

To exchange the setting data with a camera via a

Memory Stick, be sure to use Memory Sticks of a

size that can be used with both the RCP-D50/D51 and

the camera.

Memory Stick and

Corporation.

MagicGate Memory Stick and

are the trademarks of Sony

are the

trademarks of Sony Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

Power requirements 10.5 to 17 V DC

Power consumption 4.5 W

Cable length

50 m (164 feet) max.

(when the CCA-7 cable is used)

Operating temperature

5°C to 40°C (41°F to 104°F)

Dimensions (w/h/d) RCP-D50:

102 × 354 × 126.5 mm

(4 ¹/₈× 14 × 5 inches)

RCP-D51:

102 × 354 × 86.5 mm

(4 ¹/₈× 14 × 3¹/₂inches)

RCP-D50: 1.5 kg (3 lb 5 oz)

RCP-D51: 1.3 kg (2 lb 14 oz)

Mass

Inputs/outputs

CCU/CAMERA

MONITOR

EXT I/O

10-pin multiconnector (1)

BNC type (1)

9-pin D-sub connector (1)

Supplied accessories

Remote cable CCA-7-5 (5 m) (1)

Operating instructions (1 set)

Optional accessories

Remote cable CCA-7-5 (5 m)

Remote cable CCA-7-25 (25 m)

Memory Stick

Design and specifications are subject to change

without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sony Corporation

Download from Www.Somanuals.com. All Manuals Search And Download.

Shindaiwa Trimmer 81646 User Manual
SMSC Switch USB2514i User Manual
Snell Acoustics Speaker 650r User Manual
Sony Camcorder 4 171 501 121 User Manual
Sony Headphones MDR D777LP User Manual
Sony Portable DVD Player D V55 User Manual
Sony Radio Antenna ICF CD2000 User Manual
Sony Stereo System 3 300 703 112 User Manual
Spalding Fitness Equipment M8660411 User Manual
SVAT Electronics Security Camera CV1010 User Manual