4-252-271-12(1)
FM Stereo
FM/AM Receiver
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
STR-DE597
©2004 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
• The instructions in this manual are for model
at the lower right corner of the front panel.
• The instructions in this manual describe the controls
on the receiver. You can also use the controls on the
supplied remote if they have the same or similar
names as those on the receiver. For details on the use
of your remote, see pages 42–45.
About area codes
The area code of the receiver you purchased is
shown on the lower portion of the rear panel (see
the illustration below).
SURROUND BACK
–
+
CENTER
R
FRONT
A
L
+
–
–
+
R
SURROUND
L
AC OUTLET
RS
4-XXX-XXX-XX AA
Area code
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
**“DTS”, “DTS-ES”, “Neo:6” and “DTS 96/24” are
trademarks of Digital Theater Systems, Inc.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Advanced Adjustments and
1: Check how to hookup your
1a: Connecting components with
2: Connecting the antennas...................14
4: Connecting the AC power cord ........17
digital components ......................... 35
Using the Sleep Timer.......................... 40
— MULTI CH IN
(Models of area code CEL, CEK
only)
Using the Radio Data System (RDS)....26
only)
Troubleshooting.................................... 47
Specifications ....................................... 49
List of button locations and reference
pages............................................... 52
Index..................................................... 53
Enjoying Surround Sound
Using only the front speakers ...............30
— AUTO FORMAT DIRECT
Selecting a sound field..........................31
Selecting the surround back decoding
mode ...............................................33
— SURR BACK DECODING
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Steps 1a through 1c beginning on page 7 describe how to hook up your components to this receiver.
Before you begin, refer to “Connectable components” below for the pages which describe how to
connect each component.
After hooking up all your components, proceed to “2: Connecting the antennas” (page 14).
Connectable components
Component to be connected
DVD player
Page
With digital audio outputa)
With multi channel audio outputb)
With analog audio output onlyc)
TV monitor
7–8
10–11
7–8
With component video inputd)
With composite video input only
Satellite tuner
8 or 11
13
With digital audio outputa)
With analog audio output onlyc)
Super Audio CD/CD player
With digital audio outputa)
With multi channel audio outputb)
With analog audio output onlyc)
MD/Tape deck
7–8
7–8
9
10
12
With analog audio output onlyc)
12
10
13
Multi channel decoder
VCR
a)
Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
Model with a MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the
component’s internal multi channel decoder through this receiver.
Model equipped only with AUDIO OUT L/R jacks, etc.
Model with component video (Y, PB/CB/B-Y, PR/CR/R-Y) input jacks.
b)
c)
d)
continued
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Required cords
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cords (A to G) (not supplied).
A Audio cord
E Coaxial digital cord
White (L)
Red (R)
F Monaural audio cord
Black
B Audio/video cord
Yellow (video)
White (L/audio)
Red (R/audio)
Tip
Audio cord A can be torn into two monaural audio
cords F.
C Video cord
Yellow
G Component video cord
(Except for models of area code CEL, CEK)
D Optical digital cord
Green
Blue
Red
Notes
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
• When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the
components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cords, insert the cord plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
.
1a: Connecting components with digital audio output jacks
Hooking up a DVD player or satellite tuner
For details on the required cords (A–G), see page 6.
1 Connect the audio jacks.
DVD player
OUTPUT
AUDIO
OUT
OUTPUT
L
DIGITAL
COAXIAL
R
E
A
DIGITAL
OPTICAL
COMPONENT VID
VIDEO
IN
2
ANTENNA
MONITOR
AM
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITO
OUT
DVD
IN
COAXIAL
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
WOOFER
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
MULTI CH IN
WOOFER
D
A
OUTPUT
DIGITAL
OPTICAL
OUTPUT
AUDIO
OUT
L
R
Satellite tuner
Note
You can also listen to the sound of your TV by connecting your TV’s audio output jacks to the VIDEO 2 AUDIO IN
jacks on the receiver. In this case, do not connect the TV’s video output jack to the VIDEO 2 VIDEO IN jack on the
receiver.
continued
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect the video jacks.
(Except for models of area code CEL, CEK) The following illustration shows how to connect a satellite
tuner and a DVD player with COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks.
Connecting a TV with component video input jacks allows you to enjoy higher quality video.
TV monitor
Satellite tuner
OUTPUT
COMPONENT
R/CR/R–Y B/CB/B–Y
INPUT
COMPONENT
R/CR/R–Y B/CB/B–Y
OUTPUT
VIDEO
INPUT
VIDEO
P
P
Y
P
P
Y
C
G
C
G
DIGITAL
OPTICAL
COMPONENT VIDEO
VIDEO
IN
2
ANTENNA
Y
P
B/CB
MONITOR
/B–Y
AM
P
R/CR
/R–Y
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITOR
OUT
FRONT B
DVD
IN
R
L
COAXIAL
+
+
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
R
L
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
WOOFER
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
SPEA
MULTI CH IN
WOOFER
C
G
OUTPUT
OUTPUT
VIDEO
COMPONENT
P
R/CR/R–Y
PB/CB/B–Y
Y
DVD player
Note
On this receiver, the standard video signals cannot be converted to component video signals (or vice versa).
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up a Super Audio CD/CD player
For details on the required cords (A–G), see page 6.
DIGITAL
OPTICAL
COMPONENT VIDE
VIDEO
IN
2
ANTENNA
MONITOR
AM
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITO
OUT
DVD
IN
COAXIAL
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
WOOFER
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
MULTI CH IN
WOOFER
D
A
DIGITAL
OUTPUT
LINE
OPTICAL
OUT
L
R
Super Audio CD/CD
player
Tip
All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies.
Note
The sound is not output when you play a Super Audio CD on the Super Audio CD player connected to the
SA-CD/CD OPTICAL IN jack on this receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to
the operating instructions supplied with the Super Audio CD player.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1b: Connecting components with multi channel output
jacks
1 Connect the audio jacks.
If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect
it to this receiver’s MULTI CH IN jacks to enjoy the multi channel sound. Alternatively, the multi
channel input jacks can be used to connect an external multi channel decoder.
For details on the required cords (A–G), see page 6.
DIGITAL
OPTICAL
COMPONENT VIDEO
VIDEO
IN
2
ANTENNA
Y
P
B/CB
MONITOR
/B–Y
AM
P
R/CR
/R–Y
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITOR
OUT
FRONT B
DVD
IN
R
L
COAXIAL
+
+
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
R
L
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
WOOFER
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
SPEA
MULTI CH IN
WOOFER
A
A
F
F
FRONT SURROUND CENTER
L
R
SUB
WOOFER
MULTI CH OUT
DVD player,
Super Audio CD player,
Multi channel decoder, etc.
Tip
This connection also allows you to enjoy software with multi channel audio recorded in formats other than the Dolby
Digital and DTS.
Note
When you make connections to the MULTI CH IN jacks, you will need to adjust the level of the surround speakers
and sub woofer using the controls on the connected component.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect the video jacks.
(Except for models of area code CEL, CEK) The following illustration shows how to connect a DVD
player with COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with
component video input jacks allows you to enjoy higher quality video.
DVD player
TV monitor
OUTPUT
COMPONENT
R/CR/R–Y B/CB/B–Y
INPUT
OUTPUT
VIDEO
INPUT
VIDEO
COMPONENT
P
P
Y
P
R/CR/R–Y
PB/CB/B–Y
Y
C
G
C
G
DIGITAL
OPTICAL
COMPONENT VIDEO
VIDEO
IN
2
ANTENNA
Y
P
B/CB
MONITOR
/B–Y
AM
P
R/CR
/R–Y
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITOR
OUT
FRONT B
DVD
IN
R
L
COAXIAL
+
+
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
WOOFER
R
L
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
SPEA
MULTI CH IN
WOOFER
Note
On this receiver, the standard video signals cannot be converted to component video signals (or vice versa).
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1c: Connecting components with only analog audio jacks
Hooking up audio components
For details on the required cords (A–G), see page 6.
DIGITAL
OPTICAL
COMPONENT VID
VIDEO
IN
2
ANTENNA
MONITOR
AM
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITO
OUT
DVD
IN
COAXIAL
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
WOOFER
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
MULTI CH IN
WOOFER
OUT
IN
A
A
A
OUTPUT
LINE
INPUT OUTPUT
LINE LINE
L
L
R
R
Super Audio CD/CD
player
MD/Tape deck
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up video components
If you connect your TV to the MONITOR VIDEO OUT jack, you can watch the video fromthe selected
input (page 22). For details on the required cords (A–G), see page 6.
VCR
OUTPUT
VIDEO
OUT
TV monitor
AUDIO
OUT
INPUT
L
VIDEO
R
B
C
DIGITAL
OPTICAL
COMPONENT VID
VIDEO
IN
2
ANTENNA
MONITOR
AM
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITO
OUT
DVD
IN
COAXIAL
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
WOOFER
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
MULTI CH IN
WOOFER
OUT
IN
B
B
INPUT OUTPUT
VIDEO
IN
VIDEO
OUT
AUDIO
OUT
AUDIO
IN
L
R
VCR
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2: Connecting the antennas
Connect the supplied AM loop antenna and FM wire antenna.
AM loop antenna
(supplied)
FM wire antenna
(supplied)
DIGITAL
OPTICAL
COMPONENT VIDE
VIDEO
IN
2
ANTENNA
MONITOR
AM
VIDEO IN
VIDEO IN
VIDEO OUT VIDEO IN
VIDEO OUT
SA-CD/
CD
IN
DVD
IN
VIDEO
IN
2
MONITO
OUT
DVD
IN
COAXIAL
L
L
L
L
L
AUDIO
OUT
CENTER
R
R
R
R
R
IN
OUT
IN
SUB
WOOFER
AUDIO IN
AUDIO IN
AUDIO OUT AUDIO IN
FRONT
SURROUND
SUB
SA-CD/CD
MD/TAPE
DVD VIDEO
2
VIDEO 1
MULTI CH IN
WOOFER
*
*
The shape of the connector varies depending on the area code.
Notes
• To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3: Connecting speakers
Connect your speakers to the receiver. This receiver allows you to use a 6.1 channel speaker system.
To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a
center speaker, and two surround speakers) and a sub woofer (5.1 channel).
You can enjoy high fidelity reproduction of DVD software recorded in the Surround EX format if you
connect one additional surround back speaker (6.1 channel) (see “Selecting the surround back decoding
mode” on page 33).
Example of 6.1 channel speaker system configuration
Center speaker
Front speaker (Right)
Surround speaker (Right)
Front speaker (Left)
Sub woofer
Surround speaker (Left)
Surround back speaker
Tips
• When you connect 6.1 channel speaker system, place the surround back speaker behind the listening position.
• Since the sub woofer does not emit highly directional signals, you can place it wherever you want.
continued
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Required cords
A Speaker cords (not supplied)
B Monaural audio cord (not supplied)
(+)
Black
(–)
Front speaker
(Right)
Front speaker
(Left)
Surround back
speaker
Center speaker
E
e
E
e
E
e
E
e
A
A
A
A
SURROUND BACK
NENT VIDEO
Y
–
+
P
B/CB
/B–Y
P
R/CR
/R–Y
CENTER
EO
N
2
MONITOR
OUT
FRONT A
FRONT B
R
L
R
L
+
+
+
–
–
+
AUDIO
OUT
SPEAKERS
FRONT B*
R
L
R
SURROUND
L
SUB
AC OUTLET
SPEAKERS
WOOFER
A
A
B
INPUT
AUDIO
IN
E
e
E
e
Surround speaker
(Right)
Surround speaker
(Left)
* If you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals. You can
select the front speakers you want to use with the SPEAKERS (OFF/A/B/A+B) button. For details, see “Selecting
the speaker system” (page 40).
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing initial setup
operations
4: Connecting the AC
power cord
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
Setting the voltage selector
If your receiver has a voltage selector on the rear
panel, check that the voltage selector is set to the
local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord to
a wall outlet.
1
2
Press ?/1 to turn off the receiver.
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
3
Press ENTER.
120V
220V
240V
“CLEARING” appears in the display for a
while, then “CLEARED” appears.
The following are reset to their factory
settings.
VOLTAGE SELECTOR
• All settings in the SET UP, LEVEL,
TONE and CUSTOMIZE menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
Connecting the AC power
cord
Connect the AC power cord to a wall outlet.
• All index names for inputs and preset
stations.
• MASTER VOLUME –/+ is set to “VOL
MIN”.
UND BACK
• Input is set to DVD.
+
b
To a wall
NTER
outlet
L
+
L
AC power cord
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
SW
x
S.W. XXX (SUB WOOFER)
(Sub woofer selection)
5: Setting up the speakers
• YES
If you connect a sub woofer, select “YES”.
• NO
If you did not connect a sub woofer, select
You can use the SET UP menu to set the size,
distance and location of the speakers connected
to this receiver.
“NO”. The front speakers are automatically
setting. This activates the bass redirection
circuitry and outputs the LFE signals from
other speakers.
• In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
1
2
Press ?/1 to turn on the receiver.
Press MAIN MENU repeatedly to select
“
SET UP ”.
3
Press or repeatedly to select the
parameter you want to adjust.
For details, see “Speaker setup parameters”
below.
Note
L
R
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
x
XXXXX (FRONT)
(Front speakers size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
“SMALL”, the center, surround and surround
back speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
4
5
Press + or – repeatedly to select the
setting you want.
The setting is entered automatically.
Note
Press ENTER on the receiver if you select the
setting for “SP. PAT. X –X”.
Repeat steps 3 and 4 until you have set
all of the items that follow.
Speaker setup parameters
The initial settings are underlined.
C
x
XXXXX (CENTER)
x XXXX SET (Speaker easy setup)
(Center speaker size)
• EASY
• LARGE
If you want to set up your speakers
automatically, select “EASY SET”. You can
select a pre-defined speaker pattern (see the
supplied “Easy Setup Guide”).
• NORM
If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the center speaker
to “LARGE”.
If you want to adjust the settings of each
speaker manually, select “NORM SET”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies fromthe front
speakers (if set to “LARGE”) or sub woofer.a)
x SP. PAT. X –X (Speaker setup pattern)
When you select “EASY SET”, select the
speaker setup pattern. Press + or – repeatedly to
select the speaker setup pattern and press
ENTER to enter the selection. Check your
speaker pattern using the supplied “Easy Setup
Guide”.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
“SMALL”.
• NO
If you did not connect a center speaker, select
If the overall sound level is lower than you prefer, set
all speakers to “LARGE”. If there is not enough bass,
you can use the BASS parameter in the TONE menu
to boost the bass levels. To adjust the bass, see
page 37.
“NO”. The sound of the center channel will be
output from the front speakers.b)
SL
SR
x
XXXXX (SURROUND)
(Surround speakers size)
• LARGE
L
R
x
DIST. X.X m (XX ft.)
(Front speaker distance)
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to “LARGE”.
Initial setting: 3.0 m (10 ft.)
Lets you set the distance from your listening position
to the front speakers (A). You can adjust from 1.0
meter to 7.0 meters (3 to 23 feet) in 0.1 meter (1 foot)
steps.
If both front speakers are not placed an equal distance
from your listening position, set the distance to the
closest speaker.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other “LARGE” speakers.
• NO
B
A
A
30˚ 30˚
100˚-120˚
100˚-120˚
If you did not connect surround speakers,
C
C
select “NO”.c)
SB
x
XXX (SURR BACK)
(Surround back speaker selection)
D
• YES
If you connect a surround back speaker, select
“YES”.
• NO
If you did not connect surround back speaker,
select “NO”.
C
x
DIST. X.X m (XX ft.)
(Center speaker distance)
Initial setting: 3.0 m (10 ft.)
Lets you set the distance from your listening position
to the center speaker. Center speaker distance should
be set from a distance equal to the front speaker
distance (A) to a distance 1.5 meters (5 feet) closer to
your listening position (B).
Tips
• a)–c) correspond to the following Dolby Pro Logic
modes
a) NORMAL
b) PHANTOM
c) 3 STEREO
SL
SR
x
DIST. X.X m (XX ft.)
(Surround speaker distance)
• The “LARGE” and “SMALL” settings for each
speaker determine whether the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
However, since bass sounds have a certain amount of
directionality, it is best not to cut them, if possible.
Therefore, even when using small speakers, you can
set them to “LARGE” if you want to output the bass
frequencies from that speaker. On the other hand, if
you are using a large speaker, but prefer not to have
Initial setting: 3.0 m (10 ft.)
Lets you set the distance from your listening position
to the surround speakers. Surround speaker distance
should be set from a distance equal to the front speaker
distance (A) to a distance 4.5 meters (15 feet) closer to
your listening position (C).
If both surround speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
continued
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
SB
SL
SR
x
DIST. X.X m (XX ft.)
x
XXXX/XX
(Surround speaker position)*
Lets you specify the location of your surround speakers
for proper implementation of the surround effects in
the Cinema Studio EX modes (page 31).
Lets you set the distance from your listening position
to the surround back speaker. Surround back speaker
distance should be set from a distance equal to the front
speaker distance (A on page 19) to a distance 4.5
meters (15 feet) closer to your listening position (Don
page 19).
120˚
Tip
100˚
The receiver lets you to input the speaker position in
terms of distance. However, it is not possible to set the
center speaker further thanthe front speakers. Also, the
center speaker cannot be set more than 1.5 meters (5
feet) closer than the front speakers.
A
A
B
B
Likewise, the surround speakers cannot be set further
away from the listening position than the front
speakers. And they can be no more than 4.5 meters (15
feet) closer.
This is because incorrect speaker placement is not
conducive to the enjoyment of surround sound.
Please note that, setting the speaker distance closer than
the actual location of the speakers will cause a delay in
the output of the sound from that speaker. In other
words, the speaker will sound like it is further away.
For example, setting the center speaker distance 1–2
meters (3–6 feet) closer than the actual speaker
position will create a fairly realistic sensation of being
“inside” the screen. If you cannot obtain a satisfactory
surround effect because the surround speakers are too
close, setting the surround speaker distance closer
(shorter) than the actual distance will create a larger
sound stage.
D
D
C
60
C
30
• SIDE/LO
Select if the location of your surround speakers
corresponds to section A and C.
• SIDE/HI
Select if the location of your surround speakers
corresponds to section A and D.
• BEHD/LO
Select if the location of your surround speakers
corresponds to section B and C.
• BEHD/HI
Adjusting these parameter while listening to the sound
often results in much better surround sound. Give it a
try!
Select if the location of your surround speakers
corresponds to section B and D.
* This setup item is not available when the surround
speakers size parameter is set to “NO”.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Surround speaker position is designed specifically for
implementation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so
critical. Those sound fields were designed under the
premise that the surround speakers would be located
behind the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects becomes unclear unless set to
“SIDE/LO” or “SIDE/HI”.
Nevertheless, each listening environment has many
variables, such as wall reflections, and you may obtain
better results using “BEHD/HI” if your speakers are
located high above the listening position, even if they
are to the immediate left and right.
Therefore, although it may result in a setting contrary
to the above explanation, we recommend that you
playback multi channel surround encoded software and
select the setting that provides a good sense of
spaciousness and that best succeeds in forming a
cohesive space between the surround sound from the
surround speakers and the sound of the front speakers.
If you are not sure which sounds best, select
“BEHD/LO” or “BEHD/HI” and then use the speaker
distance parameter and speaker level adjustments to
obtain proper balance.
6: Adjusting the speaker
levels and balance
— TEST TONE
Adjust the speaker levels and balance while
listening to the test tone from your listening
position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
2
Press ?/1 to turn on the receiver.
Press TEST TONE.
“T. TONE” appears in the display and the
test tone is output from each speaker in
sequence.
Front (left) tCenter tFront (right) t
Surround (right) tSurround back t
Surround (left) tSub woofer
3
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu settings,
see page 35.
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/– on the remote or
turn MASTER VOLUME –/+ on the receiver.
• The adjusted value are shown in the display
during adjustment.
4
Press TEST TONE again after
adjustment.
The test tone turns off.
Notes
• The test tone cannot be used when MULTI CH IN
function is used.
• Although these adjustments can also be made via the
front panel using the LEVEL menu (when the test
tone is output, the receiver switches to the LEVEL
menu automatically), we recommend you follow the
procedure described above and adjust the speaker
levels from your listening position using the remote.
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the headphones
Connect the headphones to the PHONES jack.
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
• When the headphones are connected, you can
select only the following sound fields
(page 32).
Amplifier Operation
Selecting the component
1
Press input buttons to select the input.
To select the
Press
VCR
VIDEO 1 or
VIDEO 2
– HP 2CH (HEADPHONE 2CH)
– HP MULTI (HEADPHONE MULTI)
– HP THEA (HEADPHONE THEATER)
Satellite tuner
DVD player
VIDEO 2
DVD
MD or tape deck
MD/TAPE
SA-CD/CD
Super Audio CD or
CD player
Built-in tuner (FM/AM) TUNER FM/AM
The selected input appears in the display.
2
3
Turn on the component and start
playback.
Note
If you select the VCR or DVD player, set the
TV’s video input to match the component you
selected.
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to multi channel
sound
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
antennas to the receiver (see page 14).
— MULTI CH IN
You can select the audio directly from the
components connected to the MULTI CH IN
jacks. This enables you to enjoy high quality
analog inputs such as DVD or Super Audio CD.
When MULTI CH IN is selected, the tone and
sound field cannot be used.
Tip
The tuning scale differs depending on the area code as
shown in the following table. For details on area codes,
see page 3.
Area code
FM
AM
Press MULTI CH IN.
U, CA
100 kHz
10 kHz*
9 kHz
Press again to cancel the MULTI CH IN
function.
CEL, CEK, SP, TW, KR, 50 kHz
AU
E2/E3
AR
50 kHz
50 kHz
9 kHz*
10 kHz
When MULTI CHANNEL
DECODING indicator lights up
* The AM tuning scale can be changed (see page 51).
The MULTI CHANNEL DECODING indicator
lights up when the receiver is decoding multi
channel sources.
However, this indicator does not light up if you
select 2CH STEREO mode.
Automatic tuning
If you do not know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1
Press TUNER FM/AM repeatedly to
select the FM or AM band.
The last received station is tuned in.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
Tip
If “STEREO” flashes in the display and the FM stereo
reception is poor, press FM MODE to change to
monaural (MONO). You will not be able to enjoy the
stereo effect, but the sound will be less distorted. To
return to stereo mode, press FM MODE again.
continued
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct tuning
Storing FM stations
automatically
You can enter the frequency of the station you
want directly. Use the remote for the operation.
— AUTOBETICAL
1
Press TUNER repeatedly to select the
FM or AM band.
(Models of area code CEL, CEK only)
The last received station is tuned in.
This function lets you store up to 30 FM and FM
RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
Tip
You can also use TUNER FM/AM on the
receiver.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 25) .
Use the buttons on the receiver for the operation.
2
3
Press D.TUNING.
Press the numeric buttons to enter the
frequency.
1
2
Press ?/1 to turn off the receiver.
Example 1: FM 102.50 MHz
Press 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Hold down MEMORY and press ?/1 to
turn the receiver back on.
(You do not have to enter the last “0” when
the tuning scale is set to 10 kHz.)
Press 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
“AUTO-BETICAL SELECT” appears in
the display and the receiver scans and stores
all the FM and FM RDS stations in the
broadcast area.
For RDS stations, the tuner first checks for
stations broadcasting the same program,
signal. The selected RDS stations are sorted
alphabetically by their Program Service
name, then assigned a 2-character preset
code. For more details on RDS, see
page 26.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right frequency.
If not, repeat steps 2 and 3. If the entered
numbers still flash, the frequency is not used in
your area.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS station.
When done, “FINISH” appears in the
display momentarily and the receiver
returns to the normal operation.
Notes
• Do not press any button on the receiver or supplied
remote during autobetical operation, except ?/1.
• If you move to another area, repeat this procedure to
store stations in your new area.
• For details on tuning the stored stations, see “Tuning
to preset stations” (page 25).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning to preset stations
Presetting radio stations
1
Press TUNER FM/AM repeatedly to
select the FM or AM band.
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
The last received station is tuned in.
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Presetting radio stations
Each time you press the button, you can
select the preset station as follows:
1
Press TUNER FM/AM repeatedly to
select the FM or AM band.
The last received station is tuned in.
tA1yA2y...yA0yB1yB2y...yB0T
2
3
preset using Automatic Tuning
(page 23) or Direct Tuning (page 24).
tC0y...yC2yC1T
Using the remote
Press MEMORY.
1 Press TUNER repeatedly to select the FM or
“MEMORY” appears in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
AM band.
2 Press CH/PRESET –/+ repeatedly to select
the preset station you want.
4
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select a preset
station number.
To select the preset station
directly
Each time you press the button, you can
select the preset station number as follows:
Press the numeric buttons on the remote.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
tC0y...yC2yC1T
If “MEMORY” goes out before you select
the preset station number, start again from
step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric buttons to select a preset number.
5
Press MEMORY again.
The station is stored to the selected preset
number.
If “MEMORY” goes out before you press
MEMORY, start again from step 3.
6
Repeat steps 2 to 5 to preset another
station.
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If there is an emergency announcement by
government authorities, “ALARM” flashes in the
display.
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS service,
“NO XXXX” (such as “NO TEXT”) appears in the
display.
Using the Radio Data
System (RDS)
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio
Data System), which enables radio stations to
send additional information along with the
regular program signal. You can also display
RDS information.
Description of program types
Notes
Program type
indication
Description
• RDS is operable only for FM stations.
• Not all FMstations provide RDS service, nor do they
provide the same types of services. If you are not
familiar with the RDS services in your area, check
with your local radio stations for details.
NEWS
News programs
AFFAIRS
Topical programs that expand on
current news
INFO
Programs offering information on
a wide spectrum of subjects,
including consumer affairs and
medical advice
Receiving RDS broadcasts
Simply select a station on the FM band
using automatic tuning (page 23), direct
tuning (page 24), or preset tuning
(page 25).
SPORT
Sports programs
EDUCATE
Educational programs, such as
“how-to” and advice programs
DRAMA
Radio plays and serials
When you tune in a station that provides RDS
services, the RDS indicator lights up and the
program service name appears in the display.
CULTURE
Programs about national or
regional culture, such as language
and social concerns
Note
SCIENCE
VARIED
Programs about the natural
sciences and technology
RDS may not work properly if the station you tuned to
is not transmitting the RDS signal properly or if the
signal strength is weak.
Other types of programs such as
celebrity interviews, panel games,
and comedy
POP M
Popular music programs
Rock music programs
Easy Listening
Displaying RDS information
ROCK M
EASY M
LIGHT M
While receiving an RDS station, press
DISPLAY repeatedly.
Instrumental, vocal, and choral
music
Each time you press the button, RDS
information on the display changes cyclically as
follows:
CLASSICS
OTHER M
Performances of major orchestras,
chamber music, opera, etc.
Program Service name tFrequency t
Program Type indicationa) tRadio Text
indicationb) tCurrent Time indication (in 24-
hour system) tSound field currently applied
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
WEATHER
FINANCE
Weather information
a)
Type of program being broadcast (see page 26).
Text messages sent by the RDS station.
b)
Stock market reports and trading,
etc.
CHILDREN
SOCIAL
Programs for children
Programs about people and the
things that affect them
RELIGION
Programs of religious content
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Program type
indication
Description
Changing the display
PHONE IN
TRAVEL
LEISURE
Programs where members of the
public express their views by
phone or in a public forum
Changing the information in
the display
Programs about travel. Not for
announcements that are located by
TP/TA
You can check the sound field etc. by changing
the information in the display.
Programs on recreational
activities such as gardening,
fishing, cooking, etc.
Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will
change cyclically as follows.
JAZZ
Jazz programs
Index name of the input* tSelected input t
Sound field currently applied
COUNTRY
NATION M
Country music programs
Programs featuring the popular
music of the country or region
When the tuner is selected
OLDIES
Programs featuring oldies music
Folk music programs
Program Service name** or preset station name*
tRadio Text indication** tCurrent Time
indication (in 24-hour system)** tSound field
currently applied
FOLK M
DOCUMENT
NONE
Investigative features
Any programs not defined above
* Index name appears only when you have assigned
one to the input or preset station (page 39). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
**During RDS reception only. (Models of area code
CEL, CEK only. See page 26).
Adjusting the brightness of
the display
Press DIMMER repeatedly.
The brightness of the display will change in 3
steps.
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
About the indications in the display
1
2
3
4
5
6
7
;
DIGITAL EX
;PRO LOGIC II DTS-ES
LFE SP A
NEO:6
RDS
STEREO MONO
MEMORY
SW
SP B SLEEP OPT COAX
96/24 D.RANGE
L
C
S
R
SL
SR
qs qa q;
9
8
SB
qd
A SW: Lights up when sub woofer selection is
set to “YES” (page 18) and the audio signal is
output from the SUB WOOFER jack.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 35).
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 23–27 for tuner operations.
D
E
; DIGITAL EX: “; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Dolby Digital EX format.
Note
“RDS” appears for models of area code CEL,
CEK only.
; PRO LOGIC II: “; PRO LOGIC” lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music decoder is
activated. However, both indicators do not
light up if both the center and surround
speakers are set to “NO” and “A.F.D. AUTO”,
“DOLBY PL”, “PLII MOV” or “PLII MUS”
is selected.
I D.RANGE: Lights up when dynamic range
compression is activated (page 36).
J COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
K OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
L SLEEP: Lights up when sleep timer is
activated.
Note
Dolby Pro Logic and Dolby Pro Logic II
decoding do not function for DTS format signals.
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
M Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SB (Surround Back (the
surround back components obtained by 6.1
channel decoding))
Example:
Recording format (Front /Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
L
C
R
SL
SR
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying higher fidelity
sound
Enjoying Surround Sound
Using only the front
speakers
— AUTO FORMAT DIRECT
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
A.F.D. mode
(Display)
Decoding mode
A.F.D. AUTO
(A.F.D. AUTO)
As encoded
Listening to 2 channel stereo
sources (2CH STEREO)
PRO LOGIC
(DOLBY PL)
Dolby Pro Logic
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
PRO LOGIC II MOVIE Dolby Pro Logic II
(PLII MOV)
PRO LOGIC II MUSIC
(PLII MUS)
Press 2CH.
Neo:6 Cinema
(NEO6 CIN)
DTS Neo:6
“2CH ST.” appears in the display and the
receiver switches to the 2CH STEREO mode.
Neo:6 Music
(NEO6 MUS)
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to the 2 channel stereo
sources using the front left/right speakers and a sub
woofer, set to the A.F.D. mode.
Decoding the input audio
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
Press A.F.D. repeatedly to select “A.F.D.
AUTO”.
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying stereo sound in multi
channel (2 channel decoding
mode)
Selecting a sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
This mode lets you specify the type of decoding
for 2 channel audio sources. This receiver can
reproduce 2 channel sound in 5 channels
through Dolby Pro Logic II; 6 channels through
DTS Neo:6 or 4 channels through Dolby Pro
Logic. However, DTS 2CH sources are not
decoded by DTS Neo:6; they are output in 2
channels.
Selecting a sound field for
movies
Press MOVIE repeatedly to select the
sound field you want.
Press A.F.D. repeatedly to select the 2
channel decoding mode.
The selected sound field appears in the display.
The selected type of decoding appears in the
display.
Sound field
Display
CINEMA STUDIO EX A DCS
CINEMA STUDIO EX B DCS
CINEMA STUDIO EX C DCS
C.ST.EX A
C.ST.EX B
C.ST.EX C
x DOLBY PL (PRO LOGIC)
Performs Dolby Pro Logic decoding. The source
recorded in 2 channel is decoded into 4.1 channels.
x PLII MOV (PRO LOGIC II MOVIE)
About DCS (Digital Cinema
Sound)
Performs Dolby Pro Logic II Movie mode decoding.
This setting is ideal for movies encoded in Dolby
Surround. In addition, this mode can reproduce sound
in 5.1 channel when watching videos of overdubbed or
old movies.
Sound fields with DCSmarks use DCS
technology.
DCS is the concept name of the surround
technology for home theater developed by Sony.
DCS uses the DSP (Digital Signal Processor)
technology to reproduce the sound
characteristics of an actual cinema cutting studio
in Hollywood.
When played at home, DCS will create a
powerful theater effect that mimics the artistic
combination of sound and action as envisioned
by the movie director.
x PLII MUS (PRO LOGIC II MUSIC)
Performs Dolby Pro Logic II Music mode decoding.
This setting is ideal for normal stereo sources such as
CDs.
Note
Dolby Pro Logic and Dolby Pro Logic II decoding do
not function for DTS format signals.
x NEO6 CIN (Neo:6 Cinema)
Performs DTS Neo:6 Cinema mode decoding.
x C.ST.EX A (CINEMA STUDIO EX A) DCS
Reproduces the sound characteristics of the Sony
Pictures Entertainment “Cary Grant Theater” cinema
production studio. This is a standard mode, great for
watching most any type of movies.
x NEO6 MUS (Neo:6 Music)
Performs DTS Neo:6 Music mode decoding. This
setting is ideal for normal stereo sources such as CDs.
If you connect a sub woofer
x C.ST.EX B (CINEMA STUDIO EX B) DCS
When the audio signal is 2 channel stereo or if
the source signal does not include a LFE signal,
the receiver generates a low frequency signal for
output to the sub woofer. However the low
frequency signal is not generated when “Neo:6
Cinema” or “Neo:6 Music” is selected.
Reproduces the sound characteristics of the Sony
Pictures Entertainment “Kim Novak Theater” cinema
production studio. This mode is ideal for watching
science-fiction or action movies with lots of sound
effects.
continued
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x C.ST.EX C (CINEMA STUDIO EX C) DCS
x CONCERT (LIVE CONCERT)
Reproduces the sound characteristics of the Sony
Pictures Entertainment scoring stage. This mode is
ideal for watching musicals or films where orchestra
music is featured in the soundtrack.
Reproduces the acoustics of a 300-seat live house.
When the headphones are
connected
You can select only from the following sound
fields.
About CINEMA STUDIO EX modes
CINEMA STUDIO EX modes are suitable for
watching motion picture DVDs (etc.), with
multi channel surround effects. You can
reproduce the sound characteristics of Sony
Pictures Entertainment’s dubbing studio in your
home.
x HP 2CH (HEADPHONE 2CH)
Outputs the sound in 2 channel (stereo). Standard 2
channel stereo sources completely bypass the sound
field processing and multi channel surround formats
are downmixed to 2 channels.
The CINEMA STUDIO EX modes consist of
the following three elements.
• Virtual Multi Dimension
x HP MULTI (HEADPHONE MULTI)
Outputs the front analog signal from MULTI CH IN
jacks.
Creates 5 sets of virtual speakers froma single
pair of actual surround speakers.
x HP THEA (HEADPHONE THEATER)
DCS
• Screen Depth Matching
Allows you to experience a theater-like environment
while listening through a pair of headphones.
Creates the sensation that the sound is coming
from inside the screen like in theaters.
• Cinema Studio Reverberation
Reproduces the type of reverberation found in
theaters.
Note
If you connect a pair of headphones while a sound field
is operating, the system will automatically switch to
HEADPHONE 2CH if using a sound field selected
with the 2CH or A.F.D. button, or to HEADPHONE
THEATER if using a sound field selected with the
MOVIE or MUSIC button.
The CINEMA STUDIO EX modes integrate
these three elements simultaneously.
Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
To turn off the surround effect
Press 2CH to select “2CH ST.” or press A.F.D.
repeatedly to select “A.F.D. AUTO”.
Tips
• The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select HALL for the
SA-CD/CD input, then change to a different input
and then return to SA-CD/CD, HALL will
automatically be applied again.
Selecting a sound field for
music
Press MUSIC repeatedly to select the
sound field you want.
• You can identify the encoding format of DVD
software, etc. by looking at the logo on the package.
The selected sound field appears in the display.
–
–
: Dolby Digital discs
Sound field
HALL
Display
HALL
: Dolby Surround encoded
programs
: DTS Digital Surround encoded programs
–
JAZZ CLUB
LIVE CONCERT
JAZZ
CONCERT
x HALL
Reproduces the acoustics of a classical concert hall.
x JAZZ (JAZZ CLUB)
Reproduces the acoustics of a jazz club.
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• Sound fields do not function for the signals with a
sampling frequency of more than 48 kHz.
• When one of the following sound fields are selected,
no sound is output from the sub woofer if all the
speakers are set to “LARGE” in the SET UP menu.
However, the sound will be output from the sub
woofer if the digital input signal contains LFE (Low
Frequency Effect) signals, or if the front, center, or
surround speakers are set to “SMALL”.
– HALL
Selecting the surround
back decoding mode
— SURR BACK DECODING
This function lets you select the decoding mode
for the surround back signals of the multi
channel input stream.
By decoding the surround back signal of DVD
software (etc.) recorded in Dolby Digital EX,
DTS-ES Matrix, DTS-ES Discrete 6.1, etc.
format, you can enjoy the surround sound
intended by the filmmakers.
– JAZZ CLUB
– LIVE CONCERT
to select the surround back decoding
mode.
“SB XXXX” appears in the display.
For details, see “Howto select the surround back
decoding mode” on page 34.
Tip
You can select the surround back decoding mode using
“SB XXXX” in the CUSTOMIZE menu (page 38).
Note
You can select the surround back decoding mode only
when A.F.D. mode is selected.
continued
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
How to select the surround back decoding mode
You can select the surround back mode you want according to the input stream.
When you select “SB AUTO”
When the input stream contains the 6.1 channel decode flaga), the appropriate decoder is applied to
decode the surround back signal.
Input stream
Output channel
Applied surround back decoder
Dolby Digital 5.1
Dolby Digital EXb)
DTS 5.1
DTS-ES Matrix 6.1c)
DTS-ES Discrete 6.1d)
5.1
6.1
5.1
6.1
6.1
—
Matrix decoder conforms to Dolby Digital EX
—
DTS Matrix decoder
DTS Discrete decoder
When you select “SB MTRX”
Dolby Digital EX is applied to decode the surround back signal regardless of the 6.1 channel decode
flaga) in the input stream. This decoder conforms to Dolby Digital EX and functions the same as the
decoderse) used in movie theaters.
Input stream
Output channel
Applied surround back decoder
Dolby Digital 5.1
Dolby Digital EXb)
DTS 5.1
DTS-ES Matrix 6.1c)
DTS-ES Discrete 6.1d)
6.1
6.1
6.1
6.1
6.1
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
When you select “SB OFF”
Surround back decoding is not performed.
a)
6.1 channel decode flag is the information recorded in software like DVDs.
Dolby Digital DVD that includes a Surround EX flag. The Dolby Corporation web page can help you distinguish
Surround EX films.
Software encoded with a flag to denote it has both Surround EX and 5.1 channel signals.
Software encoded with both 5.1 channel signals and an extension stream designed for returning those signals to
6.1 discrete channels. Discrete 6.1 channel signals are DVD specific signals not used in movie theaters.
This decoder can be used for all 6.1 formats (Dolby Digital EX, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1).
b)
c)
d)
e)
Note
There may be no sound from the surround back speaker in Dolby Digital EX mode. Some discs have no Dolby Digital
EX flag even though the packages have Dolby Digital EX logos. In this case, select “SB MTRX”.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing sound fields
Advanced Adjustments and Settings
By adjusting the LEVEL menu, you can
customize the sound fields to suit your particular
listening situation.
Switching the audio input
mode for digital
components
Note on the displayed items
The setup items you can adjust in each menu vary
depending on the sound field. Certain setup parameters
may be dimmed in the display. This means that the
selected parameter is either unavailable or fixed and
unchangeable.
— INPUT MODE
You can switch the audio input mode for
components which have digital audio input
jacks.
Adjusting the LEVEL menu
1
2
Press input buttons to select the input.
You can adjust the balance and level of each
speaker. These settings are applied to all sound
fields except for effect level parameter. The
effect level parameter settings are stored
individually for each sound field.
Press INPUT MODE repeatedly to
select the audio input mode.
The selected audio input mode appears in
the display.
Audio input modes
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
• AUTO IN
Gives priority to digital signals when there are
both digital and analog connections. If there
are no digital signals, analog is selected.
• COAX IN
Specifies the digital audio signals input to the
DIGITAL COAXIAL input jack.
• OPT IN
Specifies the digital audio signals input to the
DIGITAL OPTICAL input jacks.
• ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
2
3
Press MAIN MENU repeatedly to select
“
LEVEL ”.
Press or
repeatedly to select the
parameter you want to adjust.
For details, see “LEVEL menu parameters”
below.
4
5
While monitoring the sound, press + or
– repeatedly to select the setting you
want.
The setting is entered automatically.
Repeat steps 3 and 4 to adjust the other
parameters.
Note
When signals with a sampling frequency of more than
48 kHz is input, the tone and sound field cannot be
used.
LEVEL menu parameters
The initial setting is underlined.
L
R
x
BAL. L/R XX
(Front speaker balance)
Initial setting: BALANCE (0)
Lets you adjust the balance between front left and right
speakers. You can adjust in the range of BAL. L (+1 to
+8), BALANCE (0), BAL. R (+1 to +8) in 17 steps.
continued
35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x CTR XXX dB
(Center speaker level)
Resetting sound fields to the
initial settings
x SUR.L. XXX dB
(Surround speaker (left) level)
Use the buttons on the receiver for the operation.
x SUR.R. XXX dB
(Surround speaker (right) level)
1
2
Press ?/1 to turn off the power.
While holding down 2CH, press
?/1.
x SB XXX dB
(Surround back speaker level)
“SF. CLR.” appears in the display and all
sound fields are reset to the initial setting.
x S.W. XXX dB
(Sub woofer level)
Initial setting: 0 dB
You can adjust from –10 dB to +10 dB in 1 dB steps.
D.RANGE
x
COMP. XXX
(Dynamic range compressor)
Lets you compress the dynamic range of the sound
track. This may be useful when you want to watch
movies at low volumes late at night.
• OFF
The dynamic range is not compressed.
• STD
The dynamic range is compressed as intended by the
recording engineer.
• MAX
The dynamic range is compressed dramatically.
Tip
Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the dynamic
range information included in the Dolby Digital signal.
We recommend using the “MAX” setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
Note
Dynamic range compression is possible with Dolby
Digital sources only.
x EFCT. XXX (Effect level)
Initial setting: STD
Lets you adjust the “presence” of the surround effect.
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the tone
Advanced settings
You can adjust the tonal quality (bass, treble
level) of the front speakers using the TONE
menu.
Using the CUSTOMIZE menu
to adjust the receiver
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
You can adjust various receiver settings using
the CUSTOMIZE menu.
2
CUSTOM ”.
2
3
Press MAIN MENU repeatedly to select
“
“
TONE ”.
Press or repeatedly to select the
parameter you want to adjust.
Press or
repeatedly to select the
parameter you want to adjust.
For details, see “CUSTOMIZE menu
parameters” below.
For details, see “TONE menu parameters”
below.
3
4
Press + or – repeatedly to select the
setting you want.
4
5
While monitoring the sound, press + or
– repeatedly to select the setting you
want.
The setting is entered automatically.
Repeat steps 2 and 3 to adjust the other
items.
The setting is entered automatically.
Repeat steps 3 and 4 to adjust the other
items.
CUSTOMIZE menu parameters
The initial settings are underlined.
DTS 96/24
Note
You cannot adjust the tone when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz, or when DTS 96/24, DTS-ES Matrix or
DTS Neo:6 decoding is applied.
x
96 XXXX
(DTS 96/24 decoding mode)
• AUTO
When a DTS 96/24 signal is input, it is played back
at 96 kHz sampling frequencies.
• OFF
Even when a DTS 96/24 signal is input, it is played
back at 48 kHz sampling frequencies.
TONE menu parameters
x BASS XX dB
(Front speaker bass level)
x TREB. XX dB
Notes
(Front speaker treble level)
• This parameter is valid only in the A.F.D. mode
(page 30). In other sound fields, this parameter is
always set to “96 OFF”.
Initial setting: 0 dB
You can adjust from –6 dB to +6 dB in 1 dB steps.
• DTS 96/24 decoding is only valid in the A.F.D. mode
(page 30). When the system is set to other sound
fields, standard 48 kHz decoding is used.
• Even when a DTS 96/24 signal is input, standard
48 kHz decoding is used if any speakers are set to
“SMALL” or if the sub woofer is set to “NO”.
continued
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x SB XXXX
x NAME IN
(Surround back decoding mode)
(Naming preset stations and inputs)
You can use the CUSTOMIZE menu to set the
surround back decoding mode (page 33).
For details on each decoding mode, see page 34.
Lets you set the name of preset stations and inputs
selected with input buttons. For details, see “Naming
preset stations and inputs” on page 39.
• AUTO
• MTRX
• OFF
Note
This parameter is valid only in the A.F.D. mode
(page 30).
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for VIDEO 2 and
“DEC. PCM” for DVD and SA-CD/CD.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• You can select the character type as follows by
pressing + or – repeatedly.
Other Operations
Alphabet (upper case) tNumbers tSymbols
• To enter a blank space, press + or – repeatedly
until a blank space appears in the display.
• If you made a mistake, press < or > repeatedly
until the character you want to change flashes,
then press + or – repeatedly to select the correct
character.
Naming preset stations
and inputs
You can enter a name of up to 8 characters for
preset stations and inputs selected with input
buttons, and display it in the receiver’s display.
6
Press ENTER to store the index name.
Note (Models of area code CEL, CEK only)
When you name an RDS station and tune in the station,
the Program Service name appears instead of the name
you entered. (You cannot change the name of a
Program Service name. The name you entered will be
overwritten by the Program Service name.)
1 To index a preset station
Press TUNER FM/AM repeatedly to
select the FM or AM band, then tune in
the preset station you want to create an
index name for (page 25).
To index an input
Press the input button to select the
input you want to create an index name
for.
2
3
4
Press MAIN MENU repeatedly to select
CUSTOM ”.
“
Press or repeatedly to select
“NAME IN”.
Press ENTER.
The cursor flashes and you can select a
character.
5
Use
index name.
or
and + or – to create an
Press + or – repeatedly to select a character,
then press > to move the cursor to the next
position.
39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
Selecting the speaker
system
You can set the receiver to turn off automatically
at a specified time. Use the remote for the
operation.
You can select the front speaker system you
want to use.
Press SLEEP repeatedly while the power is
on.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front speaker
system you want to use.
Each time you press SLEEP, the display changes
cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
The selected speaker system appears in the
display. To turn off the speaker output, press
SPEAKERS (OFF/A/B/A+B) repeatedly until
“SP A” and “SP B” indication turn off.
The speaker system
Tip
To check the remaining time before the receiver turns
off, press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
• SP A
The speakers connected to the SPEAKERS
FRONT A terminals.
• SP B
The speakers connected to the SPEAKERS
FRONT B terminals.
• SP A and SP B
The speakers connected to both the
SPEAKERS FRONT A and B terminals
(parallel connection).
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a video tape
Recording
You can record from a VCR, a TV or a DVD
using the receiver. You can also add audio from
a variety of audio sources when editing a video
tape. See the operating instructions of your VCR
or DVD player if you need help.
Before you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
1
2
Select the program source to be
recorded.
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
3
4
Insert a blank video tape into the VCR
(VIDEO 1) for recording.
1
2
Select the component to be recorded.
Prepare the component for playing.
Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
For example, insert a CD into the CD
player.
3
4
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
Tip
You can record the sound from any audio source onto
a video tape while copying from a video tape or DVD.
Locate the point where you want to start recording
from another audio source, select the program source,
then start playback. The audio from that source will be
recorded onto the audio track of the video tape instead
of the audio from the original medium. To resume
audio recording from the original medium, select the
video source again.
Start recording on the recording deck,
then start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from the MD/TAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1 OUT
jacks.
• Make sure to make both digital and analog
connections to the VIDEO 2 and DVD inputs.
Analog recording is not possible if you make only
digital connections.
• The analog audio signals of the current input are
output from the VIDEO 1 OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output fromVIDEO1 OUT jacks even when MULTI
CH IN is being used. The analog audio signals of the
current or previously used input are output.
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations Using the Remote RM-U306B
You can use the remote RM-U306B to operate
the components in your system.
Remote button
description
Before you use your
remote
AV
?/1
?/1
1
2
3
4
SLEEP
ea
SYSTEM
STANDBY
Inserting batteries into the
remote
VIDEO 1
VIDEO 2
SA-CD
DVD
e;
wl
wk
Insert R6 (size-AA) batteries with the + and –
properly oriented in the battery compartment.
When using the remote, point it at the remote
sensor on the receiver.
MD/TAPE
TUNER
5
TOP MENU
DVD MENU
F
1
2
5
8
0
3
g
G
ENTER
4
6
O
9
wj
wh
f
e
7
SHIFT
E
E
e
D.TUNING
>10
-
ENTER
RETURN
6
7
+
>
–
.
CH/PRESET
TV/VIDEO
wg
wf
ANT
TV/VTR
m
M
D.SKIP
8
9
q;
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace all batteries with new ones.
wd
ws
wa
X
N
x
MOVIE/
MUSIC
2CH
A.F.D.
qa
Notes
TEST TONE
MAIN MENU
MULTI CH
qs
qd
qf
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a
malfunction.
w;
ql
qk
MENU
MUTING
MASTER
VOL
qg
qh
• If you don’t use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
TV VOL
TV CH
qj
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The tables below show the settings of each
button.
Remote
Button
Operations Function
MENU –/+ Receiver
qk
Adjusts or changes the
setting.
Remote
Button
Operations Function
MOVIE/
MUSIC qa
Receiver
Selects the pre-
programmed sound
fields for movie and
music.
A.F.D. ws Receiver
Selects the decoding
mode for audio sound.
ANT
VCR
Selects output signal
from the antenna
terminal: TV signal or
VCR program.
TV/VTR 8
MULTI CH Receiver
qs
Selects MULTI CH IN
source.
MUTING Receiver
qf
Mutes the sound from
the receiver.
AV ?/1 1TV/VCR/
Turns the audio and
videocomponentsonor
CD player/
VCD player/ off.
RETURN VCD player Returns to the previous
LD player/
DVD player/
MD deck/
6
menu.
SA-CD wl Receiver
TolistentoSuper Audio
CD or compact disc.
DAT deck
SHIFT wh Receiver
Selects a memory page
for presetting radio
stations or tuning to
preset stations.
CH/
Receiver
Selects preset stations.
Selects preset channel.
PRESET–/+ TV/VCR/
wg
Satellite tuner
SLEEP ea Receiver
Activates the sleep
function and the
duration which the
receiver turns off
automatically.
D.SKIP 8 CD player/
Skips discs (multi-disc
VCD player/ changer only).
DVD player/
MD deck
D.TUNING Receiver
6
Enters direct tuning
mode.
SYSTEM Receiver/TV/ Turns off the receiver
STANDBY VCR/Satellite and other Sony audio/
DVD 4
Receiver
To watch DVD.
(Press AV tuner/
video components.
?/1 1
CD player/
DVD
DVD player Displays DVD menu.
and?/12VCD player/
at the same LD player/
MENU wj
ENTER 6 TV/VCR/
After selecting a
Satellite tuner/ channel, disc or track
time)
DVD player/
MD deck/
LD player/
MD deck/
using the numeric
buttons, press to enter
DAT deck
TEST
TONE w;
Receiver
Outputs test tone.
DAT deck/ the value.
Tape deck
TOP
MENU wj
DVD player Displays DVD title.
ENTER wj DVD player Enters the selection.
MAIN
MENU qd
Receiver
Selects the menu of the
receiver.
TUNER 5Receiver
To listen to radio
programs.
MASTER
Receiver
Adjusts the master
TV CH
+/– qh
TV
Selects preset TV
channels.
VOL +/– qg
volume of the receiver.
MD/TAPE Receiver
wk
To listen to Minidisc or
audio tape.
TV/VIDEO TV
7
Selects input signal: TV
input or video input.
MENU </> Receiver
Selects a menu item.
TV VOL
+/– qj
TV
Adjusts the volume of
the TV.
ql
continued
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Button
Operations Function
Remote
Button
Operations Function
VIDEO 1 e;Receiver
To watch VCR.
(VTR mode 3)
Nwd
X 9
x q;
VCR/
Starts playback.
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
VIDEO 2 3Receiver
To watch VCR.
(VTR mode 1)
0-9 wj
Receiver
Use with SHIFT to
preset radio station or
tuning to preset stations
and with D.TUNING
for direct tuning.
VCR/
Pauses playback or
recording. (Also starts
recording with
components in
recording standby.)
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
CD player/
VCD player/ 0 selects track 10.
LD player/
MD deck/
DAT deck
Selects track numbers.
TV/VCR/
Satellite tuner numbers.
Selects channel
VCR/
Stops playback.
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
2CH wa
Receiver
Selects 2CH STEREO
mode.
>10 wh
CD player/
VCD player/ over 10.
LD player/
Selects track numbers
MD deck
-/-- wh
TV
Selects the channel
entry mode, either one
or two digit.
Owj
DVD player Returns to the previous
menu or exits the menu.
V/v/B/b DVD player Selects a menu item.
wj
?/1 2
Receiver
Turns the receiver onor
off.
Notes
./> VCR/
Skips tracks.
• When you press the input buttons (VIDEO1, VIDEO
2, DVD), the input mode of the TV might not switch
to the corresponding input mode that you want. In
this case, press the TV/VIDEO button to switch the
input mode of the TV.
wg
CD player/
VCD player/
LD player/
DVD player/
MD deck/
• Some functions explained in this section may not
work depending on the model.
DAT deck/
Tape deck
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
m/M
wf
CD player/
VCD player/ forward or backward
DVD player direction.
Searches tracks in the
VCR/
Fastforwards or
rewinds.
LD player/
MD deck/
DAT deck/
Tape deck
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset a button to its factory
setting
Changing the factory
setting of an input button
Repeat the above procedure.
To reset all the input buttons to
their factory setting
If the factory settings of the input buttons do not
match your system components, you can change
them. For example, if you have a tape deck and
you do not have an MD deck, you can assign the
MD/TAPE button to your tape deck.
Press ?/1, AV ?/1and MASTER VOL –at the
same time.
Note that the settings of the TUNER button
cannot be changed.
1
Hold down the input button whose
input you want to change (for example,
MD/TAPE).
2
Press the corresponding button of the
component you want to assign to the
input button (for example, 4 – Tape
deck).
The following buttons are assigned to select
the input:
To operate
Press
CD player
1
DAT deck
2
MD deck
3
Tape deck A
4
Tape deck B
5
LD player
6
VCR (command mode VTR 1*)
VCR (command mode VTR 2*)
VCR (command mode VTR 3*)
TV
7
8
9
0
DSS (Digital Satellite Receiver)
DVD player
>10
ENTER
.
VCD player
*Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
Now you can use the MD/TAPE button to
control the tape deck.
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any question or problem concerning your
receiver, please consult your nearest Sony dealer.
Additional Information
Precautions
On safety
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
On power sources
• Before operating the receiver, check that the
operating voltage is identical with your local power
supply. The operating voltage is indicated on the
nameplate at the rear of the receiver.
• The receiver is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the receiver itself has been turned off.
• If you are not going to use the receiver for a long
time, be sure to disconnect the receiver from the wall
outlet. To disconnect the AC power cord, grasp the
plug itself; never pull the cord.
• (Models of area code U, CA only)
One blade of the plug is wider than the other for the
purpose of safety and will fit into the wall outlet only
one way. If you are unable toinsert the plugfully into
the outlet, contact your dealer.
• AC power cord must be changed only at the qualified
service shop.
On heat buildup
Although the receiver heats up during operation, this is
not a malfunction. If you continuously use this receiver
at a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
On placement
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
• Use caution when placing the receiver on surfaces
that have been specially treated (with wax, oil,
polish, etc.) as staining or discoloration of the surface
may result.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from digital sources (from
COAXIAL or OPTICAL input jack).
• Check that the INPUT MODE is not set to
“ANALOG” (page 35). Check that the INPUT
MODE is not set to “COAX IN” for the sources
from OPTICAL input jack, or set to “OPT IN” for
the sources from COAXIAL input jack.
• Check that you have not selected “MULTI CH
IN”.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.
There is no sound or only a very low-level
sound no matter which component is
selected.
• Check that the speakers and components are
connected securely and correctly.
• Check that both the receiver and all components
are turned on.
The left and right sounds are unbalanced or
reversed.
• Check that the speakers and components are
connected correctly and securely.
• Adjust balance parameters in the LEVEL menu.
• Check that you have selected the correct
component on the receiver.
• Check that MASTER VOLUME –/+ is not set at
“VOL MIN”.
• Check that the SPEAKERS (OFF/A/B/A+B) is
not set to off (page 40).
There is severe hum or noise.
• Check that the speakers and components are
connected securely.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
• Check that the headphones are not connected.
• Press MUTING on the remote to cancel the
muting function.
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
There is no sound from a specific component.
• Check that the component is connected correctly
to the audio input jacks for that component.
• Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
There is no sound from the surround back
speakers.
• Some discs have no Dolby Digital EX flag even
though the packages have Dolby Digital EX
logos. In this case, select “SB MTRX” (page 38).
sound is heard from the center/surround/
surround back speakers.
• Check that you have selected the correct
component on the receiver.
There is no sound from one of the front
speakers.
• Make sure the sound field function is on (press
A.F.D., MOVIE or MUSIC).
• Connect a pair of headphones to the PHONES
jack to verify that sound is output from the
headphones. If onlyone channel is output fromthe
headphones, the component may not be connected
to the receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both channels are
output from the headphones, the front speaker
may not be connected to the receiver correctly.
Check the connection of the front speaker which is
not outputting any sound.
• Select the CINEMA STUDIO EX mode
(page 31).
• Adjust the speaker level (page 21).
• Make sure the center/surround speakers size
parameter are set to either “SMALL” or
“LARGE” (pages 18 and 19).
• Make sure the surround back speaker selection is
set to “YES” (page 19).
There is no sound from the sub woofer.
• Check that the sub woofer is connected correctly
and securely.
• Make sure the sub woofer selection parameter is
set to “YES” (page 18).
There is no sound from analog 2 channel
sources.
• Check that the INPUT MODE is not set to
“COAX IN” or “OPT IN” (page 35).
• Check that you have not selected “MULTI CH
IN”.
• There is no sound output from the sub woofer
depending on the sound field.
continued
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The surround effect cannot be obtained.
• Make sure the sound field function is on (press
A.F.D., MOVIE or MUSIC).
• Sound fields do not function for the signals with a
sampling frequency of more than 48 kHz.
Radio stations cannot be tuned in.
• Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
• The signal strength of the stations is too weak
tuning.
• Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning).
• No stations have been preset or the preset stations
have been cleared (when tuning by scanning
preset stations). Preset the stations (page 25).
• Press DISPLAY repeatedly so that the frequency
appears in the display.
Dolby Digital or DTS multi channel sound is
not reproduced.
• Check that the playing DVD, etc. is recorded in
Dolby Digital or DTS format.
• When connecting the DVD player, etc. to the
digital input jacks of this receiver, check the audio
setting (settings for the audio output) of the
connected component.
RDS does not work.*
• Make sure that you are tuned to an FM RDS
station.
Recording cannot be done.
• Check that the components are connected
correctly.
• Select a stronger FM station.
• Select the source component with input buttons.
The RDS information that you want does not
appear.*
• Contact the radio station and find out whether they
actually provide the service in question. If so, the
service may be temporarily out of order.
The FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied) to
connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the ground
wire to a gas pipe.
There is no picture or an unclear picture
appears on the TV screen or monitor.
• Select the appropriate input on the receiver.
• Set your TV to the appropriate input mode.
Outdoor FM antenna
• Move your TV away from the audio components.
Receiver
ANTENNA
* Models of area code CEL, CEK only.
Remote control
AM
The remote does not function.
• Point the remote at the remote sensor
Ground wire
(not supplied)
on the
receiver.
• Remove any obstacles in the path between the
remote and the receiver.
• Replace all the batteries in the remote with new
ones, if they are weak.
To ground
• Make sure you select the correct input on the
remote.
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
Specifications
If there is a malfunction, the display shows a
message. You can check the condition of the
receiver by the message. Refer to the following
table to solve the problem.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(Models of area code U only)
DEC. EROR
Appears when the signal which the receiver cannot
decode (ex. DTS-CD) is input when “DEC. XXXX”
is set to “DEC. PCM”. Set to “DEC. AUTO”.
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
PROTECT
Irregular current is output from the speakers. The
receiver will automatically turn off after a few
seconds. Check the speaker connection and turn on
the power again. If this problem persists, consult
your nearest Sony dealer.
Amplifier section
Power Output
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
90 W + 90 W1)
If you are unable to remedy the
problem using the
troubleshooting guide
Reference Power Output1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
FRONT2):
90 W/ch
90 W
90 W/ch
90 W
Clearing the receiver’s memory may remedy the
problem (page 17). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
CENTER2):
SURR2):
SURR BACK2):
(8 ohms 1 kHz, THD 0.7%)
FRONT2):
100 W/ch
100 W
If the problem persist
CENTER2):
SURR2):
100 W/ch
100 W
Consult your nearest Sony dealer.
SURR BACK2):
Reference sections for clearing
the receiver’s memory
Models of area code CEL, CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
To clear
See
All memorized settings
Customized sound fields
page 17
page 36
100 W + 100 W1)
Reference Power Output1)
(8 ohms 1 kHz, THD 0.7%)
FRONT2):
100 W/ch
100 W
CENTER2):
SURR2):
100 W/ch
100 W
SURR BACK2):
Models of area code E2/E3, TW
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
100 W + 100 W1)
Reference Power Output1)
(8 ohms 1 kHz, THD 10%)
FRONT2):
120 W/ch
120 W
120 W/ch
120 W
CENTER2):
SURR2):
SURR BACK2):
continued
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Models of area code SP
1) Measured under the following conditions:
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
Area code
Power requirements
U, CA
120 V AC, 60 Hz
90 W + 90 W1)
Reference Power Output1)
(8 ohms 1 kHz, THD 10%)
FRONT2):
SP, CEL, CEK, AR, KR 230 V AC, 50 Hz
E2/E3, AU
TW
240 V AC, 50 Hz
110 V AC, 60 Hz
115 W/ch
115 W
CENTER2):
SURR2):
115 W/ch
115 W
2) Depending on the sound field settings and the
source, there may be no sound output.
SURR BACK2):
3) Measured under the following conditions:
Models of area code AR, KR
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
Area code
Power requirements
AR, KR
220 V AC, 50 Hz
100 W + 100 W1)
90 W + 90 W3)
Reference Power Output1)
(8 ohms 1 kHz, THD 10%)
FRONT2):
Frequency response
MULTI CH IN, SA-CD/ 10 Hz – 70 kHz
120 W/ch
120 W
CENTER2):
+0.5/–2 dB (with sound
field and tone bypassed)
CD, MD/TAPE, DVD,
VIDEO 1, 2
SURR2):
120 W/ch
120 W
SURR BACK2):
Inputs (Analog)
Models of area code AU
MULTI CH IN, SA-CD/ Sensitivity: 500 mV
CD, MD/TAPE, DVD,
VIDEO 1, 2
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
80 W + 80 W1)
Impedance: 50 kiloohms
S/N4): 96 dB
(A, 500 mV5))
(8 ohms 1 kHz, THD 0.7%)
100 W + 100 W1)
Reference Power Output1)
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
4) INPUT SHORT (with sound field and tone
bypassed).
5) Weighted network, input level.
FRONT2):
80 W/ch
80 W
80 W/ch
80 W
CENTER2):
SURR2):
Inputs (Digital)
SURR BACK2):
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
(8 ohms 1 kHz, THD 0.7%)
FRONT2):
100 W/ch
100 W
CENTER2):
SURR2):
100 W/ch
100 W
VIDEO 2, SA-CD/CD
(Optical)
Sensitivity: –
Impedance: –
S/N: 100 dB
SURR BACK2):
(8 ohms 1 kHz, THD 10%)
FRONT2):
(A, 20 kHz LPF)
120 W/ch
120 W
120 W/ch
120 W
CENTER2):
Outputs (Analog)
SURR2):
SURR BACK2):
MD/TAPE (OUT),
Voltage: 500 mV
VIDEO 1 (AUDIO OUT)
Impedance: 10 kiloohms
SUB WOOFER
Voltage: 2 V
Impedance: 1 kiloohm
Tone
Gain levels
6 dB, 1 dB step
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
FM tuner section
Video section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
Sensitivity
Mono:
Stereo:
Useable sensitivity
S/N
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
Inputs/Outputs
Video:
COMPONENT VIDEO:
(Except for models of area code CEL, CEK)
Y: 1 Vp-p, 75 ohms
PB/CB/B-Y: 0.7 Vp-p,
75 ohms
1 Vp-p, 75 ohms
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
PR/CR/R-Y: 0.7 Vp-p,
75 ohms
Mono:
Stereo:
76 dB
70 dB
80 MHz HD Pass Through
General
Power requirements
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Area code
U, CA
Power requirements
120 V AC, 60 Hz
Separation
Frequency response
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
CEL, CEK
AU
230 V AC, 50/60 Hz
240 V AC, 50 Hz
Selectivity
60 dB at 400 kHz
SP, AR, KR
E2/E3
220 – 230 V AC, 50/60 Hz
120/220/240 V AC, 50/60 Hz
110 V AC, 50/60 Hz
AM tuner section
Tuning range
Models of area code U, CA
TW
With 10-kHz tuning scale: 530 – 1,710 kHz6)
With 9-kHz tuning scale: 531 – 1,710 kHz6)
Models of area code E2/E3
Power consumption
Area code
Power consumption
With 10-kHz tuning scale: 530 – 1,610 kHz6)
With 9-kHz tuning scale: 531 – 1,602 kHz6)
Models of area code CEL, CEK, SP, AU, TW, KR
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code AR
U, CEL, CEK, AU, 220 W
SP, KR, AR, E2/E3
CA
300 VA
500 W
TW
With 10-kHz tuning scale: 530 – 1,610 kHz
Antenna
Intermediate frequency
Usable sensitivity
Loop antenna
450 kHz
50 dB/m (at 1,000 kHz or
999 kHz)
54 dB (at 50 mV/m)
0.5% (50 mV/m, 400 Hz)
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
430 × 157.5 × 312 mm
S/N
(16 7/8 × 6 2/8 × 12 2/8
inches) including
projecting parts and
controls
Harmonic distortion
Selectivity
At 9 kHz:
35 dB
40 dB
At 10 kHz:
Mass (Approx.)
8.0 kg (17 lb 11 oz)
6) You can change the AM tuning scale to 9 kHz or 10
kHz. After tuning in any AM station, turn off the
receiver. While holding down PRESET TUNING +
or TUNING +, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U306B (1)
R6 (size-AA) batteries (2)
For details on the area code of the component you
are using, see page 3.
Design and specifications are subject to change
without notice.
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of button locations and reference pages
Illustration number
How to use this page
r
Use this page to find the location of buttons that are
mentioned in the text.
DISPLAY 3(26, 27, 48)
R
R
Name of button/part Reference page
Main unit
I - O
ALPHABETICAL ORDER
Input buttons w;(22, 35, 38, 39,
48)
51)
SPEAKERS (OFF/A/B/A+B) 2
(16, 40, 47)
SURR BACK DECODING qf
(33)
TUNER FM/AM wa(22, 23, 24,
25, 39)
A - H
31, 32, 47, 48)
DIMMER 4(27)
DISPLAY 3(26, 27, 48)
Display 7(26, 27)
DVD wf(22)
ENTER qg(17, 18, 39)
FM MODE wl(23)
INPUT MODE qj(35)
IR (receptor) 5(42, 48)
MAIN MENU 8(18, 35, 37, 39)
MASTER VOLUME –/+ qh(17,
21, 22, 47)
MD/TAPE wd(22)
MEMORY e;(24, 25)
(31, 32, 47, 48)
MULTI CHANNELDECODING
(indicator) 6(23)
TUNING –/+ wk(23, 51)
VIDEO 2 wg(22)
MULTI CH IN 9(23)
MUSIC(button/indicator) qd(32,
47, 48)
2CH (button/indicator) q;(30,
32, 36)
?/1 (power) 1(17, 18, 24, 36,
51)
</> ql(18, 35, 37, 39)
+/– qk(18, 35, 37, 39)
234 5
6
7 89q;qaqsqdqfqg
1
whwgwfwdwswa
eae;wl
wk wj
w;qlqk qj qh
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
Adjusting
CUSTOMIZE parameters 37
RDS 26
Recording
LEVEL parameters 35
SET UP parameters 18
speaker levels and balance 21
TONE parameters 37
on a video tape 41
on an audio tape or MD 41
Automatic tuning 23
Selecting
component 22
C
front speaker system 40
sound field 31–33
SET UP menu 18
Sleep Timer 40
Changing
display 27
CUSTOMIZE menu 37
customizing 35
D
resetting 36
Digital Cinema Sound 31
Direct tuning 24
selecting 31–33
Speakers
Dual Mono 38
Dubbing. See Recording
adjusting speaker levels and balance 21
connection 15
placement 15
Supplied accessories 51
E
Editing. See Recording
T
Test tone 21
TONE menu 37
Tuning
I
Indexing. See Naming
automatically 23
directly 24
to preset stations 25
L
Labeling. See Naming
LEVEL menu 35
N
Naming 39
P
Preset stations
how to 25
how to tune 25
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|