3-867-450-13(1)
Compact
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the system. Record the serial
number in the space provided below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No.
Serial No.
CMT-EX1
©1999 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Getting Started
Optional Components
Step 1: Hooking up the system ................ 4
Step 2: Setting the time ............................ 6
Step 3: Presetting radio stations ............... 7
Saving the power in standby mode ........... 8
Connecting audio components ................ 20
Listening to the sound of connected
components ....................................... 21
Recording a CD on an MD/a tape ........... 22
Connecting external antennas ................. 22
Basic Operations
Additional Information
Playing a CD ............................................. 9
Listening to the radio .............................. 10
Precautions .............................................. 23
Troubleshooting ...................................... 24
Specifications .......................................... 26
Index ...........................................back cover
The CD Player
Playing the CD tracks in random order
–– Shuffle Play ................................. 12
Programing the CD tracks
–– Program Play ............................... 13
Playing the CD tracks repeatedly
–– Repeat Play .................................. 14
Using the CD display .............................. 15
Other Features
Generating a more dynamic sound.......... 16
Selecting the surround effect................... 16
Using the Radio Data System (RDS)
(European model only) ..................... 17
Falling asleep to music
— Sleep Timer ................................. 17
Waking up to music
— Daily Timer ................................. 18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Hooking up the system
Perform the following procedures 1to 5to hook up your system using the supplied cords and
accessories.
The front cover is made of tempered glass. Please remember to handle this unit carefully.
AM loop antenna
Rear cover
Right speaker
Left speaker
1 4
3
2
5
1 Remove the rear cover.
2 Connect the speakers.
Connect the speaker cords to the SPEAKER
terminals as shown below.
Insert this portion
lined
clear
Push in on the tabs
and pull up the cover
Notes
• Keep the speaker cords away from the antenna to
prevent noise.
• Be sure to connect both left and right speakers.
Otherwise, the sound will not be heard.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect the AM antenna.
Note on the glass cover of CD
player
The CD player cover is made of tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more weight
than ordinary glass. This glass, however, may
shatter if it receives a sharp blow or if it is
scratched.
Set up the AM loop antenna, then connect it.
Connect the white cord to the U terminal,
and the red cord to the other terminal.
To level the speakers
Attach the supplied speaker legs to the rear of the
speaker bottoms to level the speakers.
AM loop
antenna
Note
Keep the antenna away from the speaker cords to
prevent noise.
4 Reinstall the rear cover.
Put the wires through the hole at the bottom
of the rear cover.
Inserting two R6 (size AA)
batteries into the remote
e
E
E
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
5 Connect the AC power cord to a wall
outlet after you complete all the
connections.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
To connect optional component
See “Optional Components” on page 20.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press +/– to set the hour then press
ENTER.
Step 2: Setting the time
The minute indication flashes.
You must set the time before you can use the
timer functions.
The clock is on a 24-hour system for the European
model, and a 12-hour system for other models.
The 24-hour system model is used for illustration
purpose.
4 Press +/– to set the minute then press
ENTER.
Set the time before turning the power on.
The clock starts.
To change the time
DISPLAY
You can change the preset time while the power is
on.
2,3,4
1 Press TIMER SET.
2 Press +/– repeatedly until “CLOCK SET”
appears then press ENTER.
3 Repeat steps 2 to 4.
To show the time
You can display the clock any time.
1
2,3,4
Press DISPLAY repeatedly until the clock display
appears.
Tips
• If you have made a mistake, start over from step 1.
• The built-in clock shows the time in the display
while the power is off.
• The upper dot flashes for the first half of a minute
(0 to 29 seconds), and the lower dot flashes for the
last half of a minute (30 to 59 seconds).
1 Press TIMER SET while the power is
off.
The day indication flashes after “CLOCK
SET” flashing.
2 Press +/– to set the day then press
ENTER.
The hour indication flashes.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press MEMORY.
Step 3: Presetting radio
stations
A preset number flashes.
Proceed to step 6 while the preset number is
flashing. If the unit is not operated for more
than 16 seconds, the preset number
disappears and the unit returns to the status
of step 3. If this happens, start over from
step 4.
You can preset the following number of stations:
– 20 for FM, 10 for AM.
6 Press +/– to select the preset number
1
4,6
you want then press ENTER.
The station is stored.
Select 1 to 20 for FM, and select 1 to 10 for
AM.
2
3,4
7 Repeat steps 2 to 6 to preset other
5
6
stations.
To tune in the station manually
1 Press TUNING MODE repeatedly until
“MANUAL” appears in step 3.
2 Press +/– (or TUNING +/– on the unit)
repeatedly to tune in the station and continue
from step 5.
1 Press ?/1 to turn on the system.
2 Press TUNER/BAND repeatedly until
the band you want appears in the
display.
To change the preset number
Start over from step 2.
Each time you press the button, the band
changes as follows:
continued
FM y AM
3 Press TUNING MODE repeatedly until
“AUTO” appears.
4 Press +/– (or TUNING +/– on the unit).
The frequency indication changes and
scanning stops when the system tunes in a
station. “TUNED” and “STEREO” (for a
stereo program) appear. When you want to
stop scanning, press TUNING MODE.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Presetting radio stations
(continued)
Saving the power in
standby mode
To change the AM tuning
interval (except for European
model)
The AM tuning interval is factory-set to
9 kHz (10 kHz in some areas). To change the AM
tuning interval, tune in any AM station first, then
turn off the power. While holding down the
TUNING + button, turn the power back on. When
you change the interval, all the AM preset stations
are erased. To reset the interval, repeat the same
procedure.
You can lower the power consumption to a
minimum (Power Saving Mode) and save energy
in the standby mode.
DISPLAY
Tips
• When a new station is memorized, the station
formerly memorized at that preset number is erased.
• The preset stations are retained for a week even if
you disconnect the AC power cord or if a power
failure occurs.
• If noise is heard while listening to an FM station,
remove the FM antenna from the rear panel and
place the antenna outside the cabinet.
, Press DISPLAY when the power is off.
The unit switches to the Power Saving Mode
and the clock display disappears.
The system turns on/off by pressing ?/1.
To cancel the Power Saving
Mode
Press DISPLAY.
The clock display appears.
Notes
• When the Daily Timer is set, you cannot switch to
the Power Saving Mode.
• When the Daily Timer is set in the Power Saving
Mode, the Power Saving Mode does not function
until the timer is canceled.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
1 Touch Z (or press OPEN/CLOSE on
Playing a CD
To turn on the system, press ?/1.
"/1 (Power)
the remote) to raise the disc tray.
2 Place a CD vertically in the tray.
1,2
With the label side front.
When you play a 8 cm CD,
use the optional adaptor.
?/1
Z
NX
x
.m M>
x
./>
m/M
VOL –/+
3
OPEN/
CLOSE
"/1 (Power)
To lower the disc tray, touch Z(or press
OPEN/CLOSE on the remote) again.
S
s
CD H
3 Press NX (or CD H on the remote).
l/L
j/J
Play starts.
VOL +/–
continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a CD (continued)
Listening to the radio
To
Do this
Preset radio stations in the tuner’s memory first
(see page 7). To turn on the system, press "/1.
Stop play
Press x.
Pause
Press NX (or S on the
remote). Press again to
resume play.
"/1
(Power)
Select a track
Press ./> repeatedly
until you find the desired
track.
Find a point in
a track
Press and hold m/M
during play, and release it at
the desired point.
Remove CD
Adjust the volume
Tips
Touch Z (or press OPEN/
CLOSE on the remote).
Press VOL +/–.
?/1
Z
• You can switch from another source to the CD
player and start playing a CD by pressing NX (or
CD H on the remote) (Automatic Source
Selection).
NX
x
.m M>
• If you press NX (or CD H on the remote) while
the power is off, the power turns on and play starts
automatically (One Touch Play).
• If you touch Z while the power is off, the power
turns on, the function switches to CD, then the disc
tray rises automatically.
TUNER/
BAND
./>
TUNING –/+
VOL –/+
• To listen through the headphones, connect the
headphones to the PHONES jack on the rear panel.
"/1 (Power)
Notes
• Do not forcibly press the disc down with your
finger, as this may cause CD player trouble.
Furthermore, do not obstruct the ejecting CD. Be
sure to touch Z (or press OPEN/CLOSE on the
remote) to lower the disc tray.
• Do not push strongly on Z, as this may damage the
player.
• The disc tray will not operate if you touch Z while
wearing gloves. Touch Z with bare hands or press
OPEN/CLOSE on the remote.
1
3
STEREO/
MONO
2
VOL +/–
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the Automatic Tuning
Press TUNING MODE.
1 Press TUNER/BAND repeatedly until
the band you want appears.
Tips
Each time you press the button, the band
changes as follows:
• You can switch from another source to the tuner by
pressing TUNER/BAND (Automatic Source
Selection).
FM yAM
• If you press TUNER/BAND while the power is off,
the power turns on and the system tunes in the last
received station automatically (One Touch play).
• To improve broadcast reception, reorient the
supplied antennas or connect an optional external
antenna.
• When an FM program has static noise, press
STEREO/MONO until “MONO” appears. There
will be no stereo effect, but the reception will
improve. Press again to restore the stereo effect.
AUTO
TUNED STEREO
MHz
2 Press TUNING MODE repeatedly until
“PRESET” appears.
PRESET
MHz
TUNED STEREO
3 Press l/L to select the desired
station’s preset number.
PRESET
MHz
TUNED STEREO
To
Do this
Turn off the radio
Press "/1 to turn off the
system.
Adjust the volume
Press VOL +/–.
To listen to non-preset radio
stations
•
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then press
+/– (or TUNING +/– on the unit) repeatedly to
tune in the desired station (Manual Tuning).
•
Press TUNING MODE repeatedly until
“AUTO” appears in step 2, then press
+/– (or TUNING +/– on the unit). The
frequency indication changes and scanning
stops when the system tunes in a station
(Automatic Tuning).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The CD Player
To cancel Shuffle Play
Press CD PLAY MODE repeatedly until “SHUF”
and “PGM” disappear from the display. The tracks
continue playing in their original order.
Playing the CD tracks in
random order
–– Sh u ffle Pla y
Tips
You can play all the tracks on a CD in random
order.
• If you press CD PLAY MODE repeatedly until
“SHUF” appears during normal play, all the tracks
are played in random order.
• To skip a track, press L.
Press l to go back to the beginning of the
current track. However, you cannot go back to the
previous track.
3
1
2
l/L
1 Press FUNCTION repeatedly until
“CD” appears.
2 Press CD PLAY MODE repeatedly
until “SHUF” appears.
SHUF
3 Press CD H.
Shuffle Play starts. “;” appears, and all the
tracks play in random order.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press CD H.
Programing the CD
tracks
All the tracks play in the order you selected.
–– Pro g ra m Pla y
To cancel Program Play
Press CD PLAY MODE repeatedly until “PGM”
and “SHUF” disappear from the display.
You can make a program up to 24 tracks in the
order you want them to be played.
To change the program
You can change the program before you start
playback.
s
5
To
Do this
3
Clear the entire
program
Do steps 1 and 2, then
press s in stop mode.
1
2
3
Do step 3.
Add a track to the
program
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
CD H.
• When the total playing time has exceeded
100 minutes, the time is not displayed and the total
number of programed tracks is displayed.
• If you try to add more than the maximum number of
tracks possible, “STEP FULL” appears.
1 Press FUNCTION repeatedly until
“CD” appears.
2 Press CD PLAY MODE repeatedly
until “PGM” appears.
3 Press l/L until the desired track
number appears, then press ENTER.
4 To program additional tracks, repeat
step 3.
Each time you program, the total time of the
program and the last selected track number
are displayed. You can make a program up to
24 tracks.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel Repeat Play
Press REPEAT until “REP” or “REP 1”
disappears from the display.
Playing the CD tracks
repeatedly
–– Re p e a t Pla y
You can repeat a CD in normal play, Shuffle Play
and Program Play.
1
2
1 Press FUNCTION repeatedly until
“CD” appears.
2 Press REPEAT during play until “REP”
or “REP 1” appears.
REP
REP: For all the tracks on the CD;
Play mode
Repeat
Normal
All the tracks in their original
order
Shuffle
All the tracks in random order
(page 12)
Program
(page 13)
All the programed tracks in
order
REP 1* : For a single track only.
* You cannot repeat only one track during
Shuffle Play and Program Play.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the remaining time
Using the CD display
, Press DISPLAY repeatedly during play.
You can check the total number of tracks, the total
playing time, and the remaining time of the track
or the CD.
Each time you press the button, the display
changes as follows:
t The track number and the elapsed time of the
When a CD TEXT disc is loaded, you can check
the information stored on the CD, such as the titles
or artist names.
current track
r
The track number and the remaining time of
the current track
DISPLAY
r
The remaining time of the CD
r
The track name of the current track*
FUNCTION
r
Clock
* With CD TEXT discs only.
Checking the total playing
time
1 Press FUNCTION repeatedly until
“CD” appears.
2 While the disc is stopped, press
DISPLAY repeatedly.
Each time you press the button, the display
changes as follows:
t The total number of tracks and the total
playing time (The number of programed
tracks then total playing time of the program
when programed)
r
The disc title*
r
Artist name*
r
Clock
* With CD TEXT discs only.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
Generating a more
dynamic sound
Selecting the surround
effect
The Dynamic Sound Generator (DSG)
automatically enhances your music to produce a
more powerful sound.
You can enjoy the encompassing effects of
surround sound.
DSG
SURROUND
, Press SURROUND.
, Press DSG.
Each time you press the button, the display
Each time you press the button, the display
changes as follows:
changes as follows:
SURR ON y SURR OFF
t DSG 1 t DSG 2 t DSG OFF
When SURROUND is ON, “SURR” lights
up in the display.
When DSG is ON, “DSG” lights up in the
display.
To cancel SURROUND
Press SURROUND to turn off “SURR.”
To cancel DSG
Press DSG repeatedly to turn off “DSG.”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data
System (RDS)
(European model only)
Falling asleep to music
— Sle e p Tim e r
You can set the system to turn off after a certain
amount of time, so that you can fall asleep to
music. You can set the timer in 10 minutes
increments.
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal.
Note
RDS may not work properly if the station you have
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they all provide the same types of services. If you
are not familiar with the RDS system, check with
your local radio stations for details on RDS services
in your area.
SLEEP
Receiving RDS broadcasts
, Press SLEEP repeatedly to select a
desired time.
, Simply select a station from the FM
Each time you press the button, the minute
display (the amount of time after which the
system turns off) changes as follows:
band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
t AUTO t 90MIN t 80MIN
OFF T 10MIN...70MIN T
After a few seconds, the previous display
appears. “SLEEP” lights up in the display.
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
When you choose “AUTO,” the system turns
off after the CD finishes playback (up to 100
minutes). The system also turns off when
you manually stop playing the CD.
Station name* y Frequency
* If the RDS broadcast is not properly received, the
station name may not appear in the display.
continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Falling asleep to music
(continued)
Waking up to music
— Da ily Tim e r
To check the remaining time
Press SLEEP once.
You can wake up to music at a preset time. Make
sure you have set the clock (see page 6).
To change the remaining time
Press SLEEP repeatedly to select the time you
want.
To wake up to the radio, preset the radio stations
first (see page 7).
To cancel the Sleep Timer
function
Press SLEEP repeatedly until “OFF” appears.
8
4-7
Tip
You can use the Sleep Timer, even if you have not set
the clock.
Note
4-7
When the Sleep Timer is used, you cannot use the
Daily Timer.
2
3
TIMER
SELECT
1 Prepare the music source you want to
play.
•
•
•
CD: Place a CD. To start from a specific
track, make a program (see page 13).
Radio: Tune in a preset radio station
(see page 10).
Tape: Make the same setting on the timer
of the component connected to the TAPE
jacks.
2 Press VOL +/– to adjust the sound
volume.
3 Press TIMER SET.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the setting
4 Press +/– repeatedly until “TIMER
SET” appears then press ENTER.
The hour indication flashes.
Start over from step 1.
To check the setting / To use the
timer
Press TIMER SELECT to indicate “DAILY”. The
start time, followed by the stop time, the music
source appears, then the original display appears.
5 Set the time to start playback.
Press +/– to set the hour, then press ENTER.
The minute indication flashes.
To cancel the timer
Press TIMER SELECT to indicate “TIMER
OFF”.
Press +/– to set the minute, then press
ENTER.
The hour indication flashes again.
Tip
To reset the Daily Timer with the same settings, press
TIMER SELECT repeatedly until “DAILY” appears
in the display and then turn off the system. It is not
necessary to set the start and stop times every time.
6 Set the time to stop playback following
the procedure in step 5.
The music source indication flashes.
7 Press +/– repeatedly until the music
source you want appears.
The indication changes as follows:
t TUNER y TAPE* T
t CD PLAY T
If you press ENTER, the start time, followed
by the stop time, the music source appears,
then the original display appears. “DAILY”
lights up in the display.
* Select “TAPE” to use an optional component
connected to the TAPE jacks as the music
source.
8 Press ?/1 to turn off the system.
The Daily Timer is set. At the selected time,
the system turns on automatically and the
assigned music source begins playback.
When the time is over, the system turns off
and resets the Daily Timer.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Components
Connecting an MD deck or a
tape deck for analog
recording
Connecting audio
components
Make sure to match the color of the plugs and the
connectors.
To listen to the sound of the connected MD deck
or tape deck, press FUNCTION repeatedly until
“TAPE” appears.
To enhance your system, you can connect optional
components. Refer to the instructions of each
component.
To connect optional components, remove the small
rear cover first.
To the audio output of an
MD deck or a tape deck
Connecting an MD deck for
digital recording
You can record from CD into the MD deck
digitally by connecting an optional cable (not
supplied).
To the audio input of an MD
deck or a tape deck
To the DIGITAL IN jack of the MD deck
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting headphones
Listening to the sound
of connected
Connect headphones to the PHONES jack.
components
?/1 (Power)
2
PHONES jack
1 Prepare the audio components.
2 Press FUNCTION repeatedly until
“TAPE” appears.
Each time you press the button, the function
display changes as follows:
t TUNER t TAPE t CD
To attenuate the distortion from
the connected components
You can change the audio input level for the
TAPE input jacks between two levels.
If the sound from a connected component is
distorted, reduce the input level.
1 Press FUNCTION repeatedly until “TAPE”
appears.
2 Press ?/1 to turn off the system.
3 While holding down x on the unit, press ?/1
on the unit to turn on the system.
“ATT ON” appears in the display.
When the volume is too low, do steps 1 to 3 again
to reset to the original level.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a CD on an
MD/a tape
Connecting external
antennas
For the operations of the connected components,
refer to the instructions of each component.
Remove the rear cover and connect an external
antenna to improve the reception. Refer to the
instructions of each component.
FM antenna
Connect an optional FM external antenna.
You can also use the TV antenna instead.
4
2
1 Prepare the recording component for
75-ohm coaxial cable
(not supplied)
recording.
AM antenna
Connect a 6- to 15- meter (20- to 50- feet)
insulated wire to the AM antenna terminal.
2 Press FUNCTION repeatedly until
“CD” appears.
Leave the supplied AM loop antenna connected.
3 Start recording.
4 Press CD H.
Play starts.
Insulated wire
(not supplied)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Important
If you connect an external antenna, connect the
ground wire and the AM antenna to the U terminal.
To prevent a gas explosion, do not connect the ground
wire to a gas pipe.
Precautions
The nameplate is located on the bottom exterior.
On safety
• The glass over the display window on the cover is
made of tempered glass.
Under normal conditions, this tempered glass is
more shock resistant and able to bear more weight
than ordinary glass. This glass, however, may
shatter if it receives a sharp blow or if it is
scratched.
• The system is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the system itself has been turned off.
• Unplug the system from the wall outlet if it is not to
be used for an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
system, unplug the system and have it checked by
qualified personnel before operating it any further.
• The AC power cord must be changed only at the
qualified service shop.
• When you connect the AC power cord to the wall
outlet (mains), even though the power is off, the
system begins charging for remote and timer
functions. Therefore the surface of this unit
becomes warm, this is normal.
On placement
• Make sure the system fan is on during use. Place the
system in a location with adequate air circulation,
and do not place anything on the system.
• Place the system in a location with adequate
ventilation to prevent heat build up.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Subject to vibrations
— Subject to direct sunlight.
On installing
When you move the system, remove the CD.
continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions (continued)
On operation
Troubleshooting
If you have any problem using this system, use the
following checklist.
If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player. Should this occur, the system will not operate
properly. Remove the CD and leave the system turned
on for about 2 hours until the moisture evaporates.
First, check that the AC power cord is connected
firmly and that the speakers are connected
correctly and firmly.
Should any problem persist, consult your nearest
Sony dealer.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
General
On the speaker system
This speaker system is magnetically shielded and can
be used near TV sets. However, the picture on certain
TV sets may become magnetically distorted. In such a
case, turn off the power of the TV set once, and after
15 to 30 minutes turn it on again.
If there seems to be no improvement, locate the
speaker system further away from the TV set. Also,
be sure not to place objects in which magnets are
attached or used near the TV set, such as audio racks,
TV stands and toys. These may cause magnetic
distortion to the picture due to their interaction with
the system.
There is no sound.
• Press VOL +.
• Make sure the headphones are not connected.
• Check the speaker connections.
There is severe hum or noise.
• A TV or VCR is placed too close to the
system. Move the system away from the TV
or VCR.
“0:00” (or “0:00AM”) flashes in the
display.
• A power failure occurred. Set the clock and
timer settings again.
Notes on CDs
• Do not use a CD with tape, stickers, or paste on it as
this may damage the player.
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out. Do not use
solvents such as benzine, thinner, commercially
available cleaners, or antistatic spray intended for
vinyl LPs.
• Do not expose the CD to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
The timer does not function.
• Set the clock correctly.
The remote does not function.
• There is an obstacle between the remote and
the system.
• The remote is not pointing in the direction of
the system’s sensor.
• The batteries have run down. Replace the
batteries.
• Do not place the system in locations where it
is near an electric inverter system.
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Player
Tuner
The CD cannot be read.
• The CD was not placed in the disc tray
properly. Place a CD vertically in the tray.
Severe hum or noise (“TUNED” or
“STEREO” flashes in the display).
• Remove the FM antenna from the rear panel
and place the antenna outside the cabinet.
Adjust the antenna.
The CD will not eject.
• The CD has tape, stickers, or paste on it.
• The signal strength is too weak. Connect an
external antenna.
The CD will not play.
• Make sure the antenna is connected properly.
• The AM antenna wire is detached from the
stand.
• The CD is dirty. Clean the CD with a
cleaning cloth.
• The face of the CD is scratched. Exchange the
CD.
A stereo FM program is not received in
stereo.
• Press STEREO/MONO so “STEREO”
appears.
• The CD is facing the wrong way.
• Moisture condensation has built up. Remove
the CD and leave the system turned on for
about 2 hours until the moisture evaporates.
Play does not start from the first track.
• The player is in program or shuffle mode.
Press CD PLAY MODE repeatedly until
“SHUF” and “PGM” disappear.
If other problems not described
above occur, reset the system
as follows:
“- OVER -” is displayed.
1 Unplug the AC power cord.
• By pressing M, the last track on the disc has
been exceeded. Press and hold (or press
repeatedly) m or . to return to a track
where playback can begin.
2 Hold down ?/1, then plug the AC power cord
into the wall outlet again.
The system is reset to the factory settings. All the
settings you made, such as the preset stations,
clock, and timer are cleared. You should set them
again.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
System
Compact disc and digital audio
system
Specifications
Laser
Semiconductor laser (λ=780 nm)
Emission duration: continuous
Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the objective lens
surface on the Optical Pick-up
Block with 7 mm aperture.
Amplifier section
Laser output
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
Frequency response
20 Hz – 20,000 Hz
With 4 ohm loads both channels driven, from 70 –
20,000 Hz; rated 10 watts per channel minimum RMS
power, with no more than 0.9% total harmonic
distortion from 250 milliwatts to rated output.
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
(50 kHz step)
FM wire antenna
75 ohms unbalanced
10.7 MHz
Canadian model:
Continuous RMS power output (Reference)
Antenna
Antenna terminals
Intermediate frequency
15 + 15 watts
(4 ohms at 1 kHz, 10% THD)
European model:
DIN power output (Rated)
AM tuner section
Tuning range
12 + 12 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD)
Music power output (Reference)
15 + 15 watts
European model:
531 – 1,602 kHz
(with the interval set at 9 kHz)
531 – 1,602 kHz
Other models:
(with the interval set at 9 kHz)
530 – 1,710 kHz
Other models:
DIN power output (Rated)
(with the interval set at 10 kHz)
AM loop antenna
Antenna
12 + 12 watts
(4 ohms at 1 kHz, DIN, 240 V)
External antenna terminals
450 kHz
Intermediate frequency
12 + 12 watts
(4 ohms at 1 kHz, DIN, 220 V)
Continuous RMS power output (Reference)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD,
240 V)
15 + 15 watts
(4 ohms at 1 kHz, 10% THD,
220 V)
Inputs
TAPE IN: voltage 250 mV,
impedance 47 kilohms
Outputs
TAPE OUT: voltage 250 mV,
impedance 1 kilohms
CD OUT: Optical
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker
Speaker system
Speaker units
2-way, bass-reflex type
Woofer:
9 cm (3 5/8 in) dia., cone type
Tweeter:
2 cm (13/16 in) dia., balanced drive
Impedance
Dimensions
4 ohms
130 × 216 × 183 mm
(5 1/8 × 8 5/8 × 7 1/4 in)
(w/h/d, incl. projecting parts and
controls)
Mass
Approx 1.8 kg (3 lb 15 oz.) net per
speaker
General
Power requirements
North American model: 120 V AC, 60 Hz
European model:
Other models:
Power consumption
Dimensions
230 V AC, 50/60 Hz
110 – 240 V AC, 50/60 Hz
40 W
170 × 217 × 200 mm
(6 3/4 × 8 5/8 × 7 7/8 in)
(w/h/d, incl. projecting parts and
controls)
Mass
Supplied accessories
Approx. 3.0 kg (6 lb 10 oz.)
Remote commander (1)
Batteries (2)
AM loop antenna (1)
FM wire antenna (1)
Speaker cords (2)
Speaker legs (4)
Designs and specifications are subject to change
without notice.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
L
R
Index
Listening to
Radio stations
presetting 7
the radio 10
the sound of connected
components 21
tuning in 10
A
RDS 17
Recording a CD 22
Repeat Play 14
Resetting the system 25
Adjusting
M
the sound 16
the volume 10, 11
Antennas 5, 22
Manual Tuning 7, 11
Automatic Source Selection
10, 11
S
N
Setting the time 6
Shuffle Play 12
Sleep Timer 17
Speakers 4
Automatic Tuning 7, 11
Normal Play 9
B
O
Batteries 5
Surround effect 16
One Touch Play 10, 11
C
T, U, V, W, X, Y, Z
P, Q
CD player 9, 12
Clock setting 6
Timer
Playing
a CD 9
falling asleep to music 17
waking up to music 18
Troubleshooting 24
Tuner 7, 10
Connecting. See Hooking up
tracks in random order
(Shuffle Play) 12
tracks in the desired order
(Program Play) 13
D, E, F, G
Tuning interval 8
Daily Timer 18
Display 6, 15
tracks repeatedly (Repeat
Play) 14
DSG (Dynamic Sound
Generator) 16
Power Saving Mode 8
Precautions 23
Presetting radio stations 7
Program Play 13
H, I, J, K
Hooking up
optional components 20
the antennas 5, 22
the speaker 4
Sony Corporation
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|