Disposal of Old Electrical & Electronic
Equipment
(Applicable in the European Union and
other European countries with separate
collection systems)
Basic Operations
2-691-497-14(1)
Notes
Notes on loading discs
To
Press
If your country or region does not support DAB broadcast, “No
When you turn on the system, the disc is not pulled into the disc slot
until “No Disc” appears in the display. Do not attempt to push in the
disc until “No Disc” appears.
Pause playback
Service” appears.
(pause) on the remote (or
TAPE (pause) on the unit).
To resume play, press the button
again.
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Do not press any button on the unit or the remote during DAB
Automatic Scan. Scanning is interrupted and service list may not be
created properly. In this case, run the DAB Automatic Scan again.
If you move to another area, repeat this procedure to store the
stations for your new area.
Micro HI-FI
If you load a disc that is not playable by this system, it will be ejected
automatically.
Do not load an 8 cm disc with an adaptor. Doing so may cause the
system to malfunction.
When you remove a disc, handle the disc by its edge and pull it
straight out of the disc slot. Do not touch the surface.
Component System
Operating Instructions
Stop playback
(stop) on the remote (or
TAPE (stop) on the unit).
is procedure clears all previously stored presets.
Before unplugging the DAB antenna, make sure the system is turned
off to preserve your own DAB settings.
GB
Rewind or fast
forward
/(rewind/fast forward) .
Note on the jog dial
Only the first 9 characters are displayed when performing the group
search, track search, or file search.
is tuner does not support data services.
Tip
Notes on Repeat Play
If you select “” the tape deck stops automatically aſter repeating
All tracks or files on a disc are played repeatedly up to five times.
Selecting a music source
the sequence five times.
“REP 1” indicates that a single track or file is repeated until you stop
it.
Press the following buttons (or press FUNCTION
repeatedly).
Notes on playing MP3 discs
Applicable accessories: Remote commander
Do not save other types of files or unnecessary groups on a disc that
Changing the display
To change
Information on
the display*
To select
Press
has MP3 files.
CD
CD on the remote.
Groups that have no MP3 files are skipped.
MP3 files are played back in the order that they are recorded onto
the disc.
Note on DualDiscs
Press
Tuner
DAB
Tape
TUNER/BAND .
A DualDisc is a two sided disc product which mates
DVD recorded material on one side with digital
audio material on the other side. However, since the
audio material side does not conform to the Compact
Disc (CD) standard, playback on this product is not
guaranteed.
DISPLAY repeatedly when the
system is on.
e system can only play MP3 files that have a file extension of
“.MP3.”
If there are files on the disc that have the “.MP3” file extension,
but that are not MP3 files, the unit may produce noise or may
malfunction.
DAB on the remote.
CMT-CPZ1DAB
© 2006 Sony Corporation
TAPE on the remote.
Display mode
(See below.)
DISPLAY repeatedly when the
system is off.
Printed in China
Component (connected
using an audio cord)
FUNCTION repeatedly
until “MD” appears.
e maximum number of:
groups is 256 (including the root folder).
MP3 files is 511.
* For example, you can view:
CD/MP3 disc information such as the track or file number, group
name (during normal play), or the total play time (while the player
is stopped)
Music discs encoded with copyright
MP3 files and groups that can be contained on a single disc is 512.
Except for customers in the U.S.A.
and Canada
protection technologies
directory levels (the tree structure of files) is 8.
Compatibility with all MP3 encoding/writing soſtware, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
DAB station information such as the service name, channel label,
preset number, frequency, DLS (Dynamic Label Segment), or
ensemble label
WARNING
Adjusting the sound
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. Recently, various
music discs encoded with copyright protection
technologies are marketed by some record companies.
Please be aware that among those discs, there are some
that do not conform to the CD standard and may not be
playable by this product.
is appliance is classified
as a CLASS 1 LASER
product. is marking
is located on the rear
exterior.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To adjust the volume
e system offers the following display modes.
Press VOLUME +/on the remote (or turn the
Display mode
When the system is off,1)
Notes on playing multisession discs
.
VOLUME control on the unit)
If the disc begins with a CD-DA (or MP3) session, it is recognized as
a CD-DA (or MP3) disc, and other sessions are not played back.
A disc with a mixed CD format is recognized as a CD-DA (audio)
disc.
Clock
e clock is displayed.
To add a sound effect
To reduce the risk of fire, do not cover the ventilation of
the apparatus with newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the apparatus.
Power Saving
e display is turned off to conserve
power. e timer and clock continue
to operate.
Mode2)
To
Press
European model only
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
Generate a more
dynamic sound
(Dynamic Sound
Generator X-tra)
DSGX on the unit.
1) e STANDBY indicator lights up when the system is off.
2) When the system is in Power Saving Mode, the following functions
are unavailable:
setting the clock.
changing the CD power manage function.
To reduce the risk of fire or electric shock, do not place
objects filled with liquids, such as vases, on the apparatus.
Listening to the radio
Before you can receive DAB, you must complete the
DAB Automatic Scan procedure (see “Before using the
system”).
Connect the unit to an easily accessible AC outlet. Should
you notice an abnormality in the unit, disconnect the
main plug from the AC outlet immediately.
Notice for customers: the following
information is only applicable
to equipment sold in countries
Set the sound effect
EQ on the remote
repeatedly to select “BASS”
or “TREBLE,” and then
Notes on the display information
e following are not displayed;
total playing time for a CD-DA disc depending on the play mode.
total playing time for an MP3 disc.
remaining playing time for an MP3 file.
e following are not displayed correctly;
elapsed playing time of an MP3 file encoded using a VBR (variable
bit rate).
Do not install the appliance in a confined space, such as a
bookcase or built-in cabinet.
applying EU Directives
1
Select “DAB,”“FM”or “AM.”
Press TUNER/BAND
press +/on the remote
repeatedly (or turn the BASS
e manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, 108-0075 Japan.
e Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany.
repeatedly. You can also
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or the
like.
or TREBLE control
on the
select DAB directly by pressing DAB
remote.
on the
unit) to adjust the level.
Before using the system
2
3
Select the tuning mode.
Press TUNING MODE
appears.
group and file names that do not follow either the ISO9660 Level
1, Level 2 or Joliet in the expansion format.
repeatedly until “AUTO”
To use the remote
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Slide and remove the battery compartment lid , and
insert the two supplied R6 (size AA) batteries, side
first, matching the polarities shown below.
e following are displayed;
Playing a CD/MP3 disc
ID3 tag information for MP3 files when ID3 version 1 and version
Tune in the desired station.
2 tags are used.
Press +/on the remote (or TUNING +/on the
1
Select the CD function.
up to 124 characters of ID3 tag information using uppercase
letters (A to Z), lower-case letters (a to z), numbers (0 to 9), and
symbols (! " # $ % & ’ ( ) * + , . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~).
up to 16 characters of service name, up to 128 characters of DLS
(Dynamic Label Segment) and up to 16 characters of ensemble
label using uppercase letters (A to Z), lower-case letters (a to z),
numbers (0 to 9), and symbols (! " # $ % & ’ ( ) * + , . / : ; < = > ?
@ [ \ ] ^ _ ` { | } ~).
unit) . Scanning stops automatically when a station
Press CD
Load a disc.
on the remote.
is tuned in, and then “TUNED” and “STEREO” (for
2
stereo programs) appear.
Insert a disc in the disc slot
with the label side up.
Hooking up the system securely
When carrying this system
Use buttons on the unit to perform the following
procedure.
When you tune in a DAB station or an FM station that
provides RDS services, the service name or station
name appears on the display.
Notes on using the remote
Using optional audio components
With normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix different types of
batteries.
Speakers
1
Press (power)
to turn on the system, then
Attach the supplied speaker pads to the bottom of the
speakers to prevent slipping.
To connect an optional headphones
press FUNCTION
function to CD.
repeatedly to switch the
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
To stop automatic scanning (FM/AM bands
only)
Connect headphones to the PHONES jack
unit.
on the
Press (stop)
on the remote.
2
3
4
Make sure that no disc is loaded in the disc slot to
protect the CD mechanism.
To set the clock
3
Start playback.
To connect an optional analog component
To tune in a station with a weak signal (FM/AM
bands only)
If “TUNED” does not appear and the scanning does not
1
Turn on the system.
Connect additional analog component to the ANALOG
Press (play)
on the remote (or CD (play/
Hold down (stop)/CANCEL
and then press
IN jack
on the unit using an audio analog cord (not
Press (power)
.
pause)
on the unit).
DSGX
and
+
until “LOCK”appears.
supplied). Turn down the volume on the system, and
then press FUNCTION
2
Select the clock set mode.
stop, press TUNING MODE
repeatedly until “AUTO”
Unplug the power cord.
To
Press
repeatedly to select “MD”.
Press CLOCK/TIMER SET
on the remote. If the
and “PRESET” disappear, and then press +/on the
remote (or TUNING +/on the unit)
Pause playback
(pause) on the remote (or
CD (play/pause) on the
unit). To resume play, press the
button again.
current mode appears on the display, press /
To connect an optional digital component
repeatedly to
on the remote repeatedly to select “CLOCK SET?”
Connect a component with a digital optical input jack
tune in the desired station.
and then press ENTER
on the remote.
to the CD DIGITAL OUT jack
on the unit using
To reduce static noise on a weak FM stereo
station
Left speaker
Right speaker
AM loop antenna
a digital optical cord (square, not supplied). You can
digitally record from a CD-DA disc onto the connected
component.
3
Set the time.
Stop playback
Remove a disc
(stop) .
Press /
on the remote repeatedly to set
Press FM MODE
on the remote repeatedly until
Press CD (eject) on the
unit.
the hour, and then press ENTER
on the remote.
“MONO” appears to turn off stereo reception.
Note
Use the same procedure to set the minute.
You cannot make a digital recording of copy guarded discs and MP3
tracks using a digital component connected to this system.
Notes on listening to DAB stations
Select a group on an
MP3 disc
e clock settings are lost when you disconnect the
power cord or if a power failure occurs.
+/. Or turn the jog dial
on the unit and press PUSH
ENTER on the unit (turn the
jog dial on the unit during
playback until “GROUP” appears,
and then press PUSH ENTER
on the unit to select the desired
group).
When tuning in a DAB station, it may take a few seconds before you
hear any sound.
Primary service is automatically received when secondary service
To run the DAB Automatic Scan
ends.
When you turn on the system for the first time aſter
you purchase the system, DAB Automatic Scan starts
automatically and creates a list of available services.
If you want to run the DAB Automatic Scan again,
perform the procedure below.
Playing a tape
Select the tape function.
Select a track or file
/(go back/go forward)
. Or turn the jog dial on
the unit and press PUSH ENTER
on the unit. To cancel, press
CANCEL on the unit.
Antennas
1
1
Press DAB AUTO SCAN on the unit.
“DAB Auto Scan? Push ENTER” appears.
Find a location and an orientation that provide
good reception, and then set up the antenna.
Keep the antenna away from the speaker cords and
the power cord to avoid picking up noise.
Power
Press TAPE
Insert a tape.
Press TAPE (eject)
on the remote.
Connect the power cord to a wall socket.
2
2
Press PUSH ENTER on the unit (or ENTER on the
remote) .
If the plug does not fit the wall socket, detach the supplied
plug adaptor (only for models equipped with an adaptor).
on the unit, and load a TYPE
I (normal) tape into the cassette holder with the side
you want to play facing forward. Make sure there is
no slack in the tape to avoid damaging the tape or the
tape deck.
Find a point in a
track or file
With a DAB external antenna (not supplied), you
can obtain higher DAB broadcast sound quality.
We recommend that you use the supplied FM/DAB
lead antenna only temporarily until you install a
DAB external antenna.
Hold down /(rewind/
fast forward) during playback,
and release the button at the
desired point.
Scanning begins. “DAB Auto Scan” appears.
Depending on the DAB services available in your area,
scanning may take a few minutes.
FM/DAB lead antenna
(Extend it horizontally.)
or
FM/DAB lead antenna
Wall socket
3
4
Press DIRECTION
on the unit repeatedly to select
(Extend it horizontally.)
Select Repeat Play
REPEAT on the remote
repeatedly until “REP” or
“REP 1” appears.
“”to play one side. Select “”or “”to play
Before unplugging the DAB antenna, make sure
the system is turned off to preserve your own DAB
settings.
or
both sides.
Start playback.
Connect white side
Connect brown side
When scanning is complete, a list of available services
is created.
Press (play)
on the remote (or TAPE
on the unit). Press the button again to play
the reverse side.
To change the play mode
(play)
Press PLAY MODE
repeatedly while the player is
or
stopped. You can select normal play (“ ” for all MP3
files in the group on the disc), shuffle play (“SHUF” or
“
SHUF*”), or program play (“PGM”).
* When playing a CD-DA disc,
operation as SHUF Play.
(SHUF) Play performs the same
To DAB external antenna
(not supplied)
75-ohm coaxial cable with F male type connector (not supplied)
Download from Www.Somanuals.com. All Manuals Search And Download.
|