4-235-283-13(3)
FM Stereo
FM-AM Receiver
Operating Instructions
STR-VA555ES
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Features ................................................. 4
Receiving Broadcasts
Storing FM stations automatically
Parts Identification
(AUTOBETICAL)* ...................... 43
Direct tuning ........................................ 43
Automatic tuning ................................. 44
Main unit ............................................... 5
Preset tuning ........................................ 44
Using the Radio Data System (RDS)* ... 46
Hooking Up the Components
Required cords....................................... 6
Antenna hookups ................................... 7
Audio component hookups .................... 8
Video component hookups .................... 9
Digital component hookups................. 10
Multi channel input hookups ............... 12
Other hookups ..................................... 13
Other Operations
Naming preset stations and program
sources ........................................... 48
Recording ............................................ 48
Using the Sleep Timer ......................... 49
Adjustments using the SET UP button... 50
CONTROL A1 control system ......... 53
Hooking Up and Setting Up
the Speaker System
Operations using the remote
Speaker system hookup ....................... 16
Performing initial setup operations ..... 18
Multi channel surround setup .............. 19
Checking the connections.................... 25
Before you use your remote ................ 55
Location of parts and basic remote
operations ...................................... 56
Using the lists ...................................... 64
Basic Operations
Additional Information
Selecting the component ..................... 26
Selecting the 7.1 channel mode ........... 28
Listening to the sound in another room .. 29
Changing the display ........................... 29
Precautions .......................................... 76
Troubleshooting................................... 76
Specifications ...................................... 79
Tables of settings using SURROUND,
LEVEL, EQ, and SET UP buttons .. 82
Enjoying Surround Sound
Adjustable parameters for each sound
field ............................................... 85
Selecting a sound field ........................ 30
Understanding the multi channel
* Models of area code CEL only.
surround displays .......................... 35
Customizing sound fields .................... 37
Adjusting the equalizer........................ 41
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
7.1 channel mode
This receiver incorporates a 6 channel amplifier. It can reproduce the sound of movies (etc.)
encoded in 6.1 channel audio through front (L/R), center, surround (L/R), surround back, and sub
woofer speakers. This receiver also lets you enjoy a 7.1 channel mode. The 7.1 channel mode
uses DSP (Digital Signal Processor) technology to reproduce the Surround Back channel in stereo
(L/R) (page 28).
Compatible with a variety of audio formats and modes
This receiver is compatible with the following audio formats.
• Dolby Digital EX (page 34)
• Dolby Pro Logic II (page 38)
• DTS Neo:6 (page 38)
• DTS-ES Matrix 6.1 (page 34)
• DTS-ES Discrete 6.1 (page 34)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
Main unit
1 23 4 56
7
8 9 q;qaqsqd qf qgqhqj qkql
w;
–
+
rf rd
rs
ra
r; ek eh ef es e; wl wk
el ej eg ed ea
wh wgwfwdwswa
wj
2CH qg (30, 32)
2ND ROOM eh (29)
6.1CH indicator ql
FM/AM 7 (43, 44)
FM MODE r; (43, 44)
FUNCTION wd
NIGHT MODE indicator 5
ON SCREEN ef (9)
PHONES jack rf (28)
6.1CH DECODING qk (33, 50)
A.F.D. q; (30, 32)
AUDIO SPLIT wf (26)
CINEMA STUDIO EX qa (30)
(26, 43, 44, 45, 48)
INPUT MODE ws (27)
IR emitter 3
IR receptor 2
Jog dial wl (19, 29, 37, 39, 41,
48, 50)
PRESET TUNING +/– 8 (45)
PTY SELECT +/– (Models of
area code CEL only) ek (46)
RDS/PTY (Models of area code
CEL only) ej (46)
SET UP wh (19, 50)
SLEEP ej (49)
SPEAKERS switch rd (27)
SURROUND es (37)
TUNING +/– ek (44)
VIDEO 3 INPUT jacks ra
?/1 (power) 1 (18, 25, 41, 43)
Cursor buttons (
/
) wk
(19, 37, 39, 41, 48, 50)
Digital Cinema Sound indicator
qh (30)
DIGITAL CONCERT HALL qd
(31)
DIMMER rs (29)
Display 9 (35)
LEVEL e; (39)
MASTER VOLUME w; (25, 27)
MEMORY el (43, 45)
MODE +/– qf (30, 41)
MULTI/2CH ANALOG DIRECT
qj (27, 30, 32, 49)
DISPLAY 4 (29, 46)
DOOR OPEN wg
ENTER wj (18, 48)
EQ ea (41)
MULTI CHANNEL DECODING
indicator qs
MUTING wa (27)
NAME ed (48)
NIGHT MODE 6 (33)
EQUALIZER eg (41)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the Components
Required cords
Before you get started
•
•
•
•
Turn off the power to all components before making any connections.
Do not connect the AC power cord until all of the connections are completed.
Be sure to make connections firmly to avoid hum and noise.
When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on
the components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
•
•
When connecting optical digital cords, take the caps off the connectors and insert the cord plugs straight
in until they click into place.
Do not bend or tie the optical digital cord.
A Audio cord (not supplied)
White (L)
Red (R)
White (L)
Red (R)
B Audio/video cord (not supplied)
Yellow (video)
White (L/audio)
Red (R/audio)
Yellow (video)
White (L/audio)
Red (R/audio)
C Video cord (not supplied)
Yellow (video)
Yellow (video)
Black
D Optical digital cord (not supplied)
Black
E Coaxial digital cord (not supplied)
Yellow
Yellow
F Monaural audio cord (not supplied)
Black
Black
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna hookups
FM wire antenna
(supplied)
AM loop antenna*
(supplied)
ANTENNA 75Ω COAXIAL
FM
U
AM
DIGITAL
COMPONENT VIDEO
MONITOR
TV/SAT DVD/LD
CTRL
A1
VIDEO 2
VIDEO 1
S2 VIDEO S2 VIDEO S2 VIDEO
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
MD/DAT
OPTICAL
IN
OUT
OUT
IN
IN
OUT
OUT
IN
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN
IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
* The shape of the connector varies depending on the
area code.
Notes on antenna hookups
•
To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
•
•
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
as horizontal as possible.
•
Do not use the U SIGNAL GND terminal for
grounding the receiver.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio component hookups
For details on the required cords (A – F), see page 6.
MD or DAT deck
INPUT OUTPUT
LINE
LINE
L
R
Turntable
A
A
A
OUT
IN
ANTENNA 75Ω COAXIAL
FM
U
AM
DIGITAL
COMPONENT VIDEO
MONITOR
S2 VIDEO
OUT
TV/SAT DVD/LD
VIDEO 2
VIDEO 1
CTRL
A1
S2 VIDEO S2 VIDEO
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
IN
IN
OUT
OUT
IN
IN
MD/DAT
OPTICAL
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
OUT
IN
A
A
A
OUTPUT
INPUT OUTPUT
LINE LINE
LINE
L
L
R
R
CD/SACD player
Tape deck
Note on audio component
hookups
If your turntable has a ground wire, connect it
to the U SIGNAL GND terminal.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Video component hookups
DVD or LD player
TV or satellite tuner
OUTPUT
OUTPUT
AUDIO OUT
VIDEO
OUT
AUDIO OUT
L
VIDEO
OUT
L
R
R
B
B
COMPONENT VIDEO
ANTENNA 75Ω COAXIAL
FM
U
AM
DIGITAL
COMPONENT VIDEO
MONITOR
S2 VIDEO S2 VIDEO S2 VIDEO
OUT
CTRL
A1
TV/SAT DVD/LD
VIDEO 2
VIDEO 1
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
IN
IN
OUT
IN
IN
MD/DAT
OPTICAL
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
OUT
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
To the front
panel
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
OUT
IN
OUT
IN
B
C
B
B
B
B
INPUT OUTPUT
INPUT OUTPUT
INPUT
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
IN
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
AUDIO
IN
AUDIO
OUT
L
L
Camcorder
or video
game
R
R
TV monitor*
VCR
VCR
*
You can display the SET UP, SURROUND, LEVEL, EQ parameters and selected sound field by pressing ON
SCREEN.
Tip
Note on video component
hookups
When using the S-video jacks instead of the video
jacks, your monitor must also be connected via an
S-video jack. S-video signals are on a separate bus
from the video signals and will not be output through
the video jacks.
You can connect your TV’s audio output jacks
to the TV/SAT AUDIO IN jacks on the
receiver and apply sound effects to the audio
from the TV. In this case, do not connect the
TV’s video output jack to the TV/SAT VIDEO
IN jack on the receiver. If you are connecting a
separate TV tuner (or satellite tuner), connect
both the audio and video output jacks to the
receiver as shown above.
Notes
• If you make COMPONENT VIDEO connections,
nothing is displayed on the on-screen display.
• On this receiver, the component video signals are
not compatible with S-video signals nor video
signals.
If you have a satellite tuner, DVD player, or
LD player with COMPONENT VIDEO (Y, B-
Y, R-Y) output jacks and a monitor with
COMPONENT VIDEO input jacks, use a
video cord (not supplied) to connect to the
receiver.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital component hookups
Connect the digital output jacks of your DVD player and satellite tuner (etc.) to the receiver’s digital
input jacks to bring the multi channel surround sound of a movie theater into your home. To fully
enjoy multi channel surround sound, five speakers (two front speakers, two surround speakers, and a
center speaker) and a sub woofer are required. For 6.1 channel surround sound, you will also need a
surround back speaker. You can also connect an LD player with an RF OUT jack via an RF
demodulator, like the Sony MOD-RF1 (not supplied).
Tip
You can select the input mode for your digital components. See “INPUT MODE” on page 27.
Note
You cannot connect an LD player’s DOLBY DIGITAL RF OUT jack directly to this unit’s digital input jacks.
You must first convert the RF signal to either an optical or coaxial digital signal. For details, see
“Troubleshooting” on page 76.
TV or satellite
OUTPUT
tuner
VIDEO
OUT
AUDIO
OUT
OUTPUT
L
DIGITAL
OPTICAL
R
D
B
ANTENNA 75Ω COAXIAL
FM
U
AM
DIGITAL
COMPONENT VIDEO
MONITOR
TV/SAT DVD/LD
CTRL
A1
VIDEO 2
VIDEO 1
S2 VIDEO S2 VIDEO S2 VIDEO
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
MD/DAT
OPTICAL
IN
OUT
OUT
IN
IN
OUT
OUT
IN
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
E
D
B
OUTPUT
OUTPUT
OUTPUT
DIGITAL
OPTICAL
DIGITAL
COAXIAL
VIDEO
OUT
AUDIO
OUT
L
R
DVD or LD player
(etc.)*
* Make either coaxial or optical connections. We recommend making coaxial connections instead of optical
connections.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the digital output jacks of your MD or DAT deck to the receiver’s digital input jack and
connect the digital input jacks of your MD or DAT deck to the receiver’s digital output jack. These
connections allow you to make digital recordings of TV broadcasts, etc.
MD or DAT deck
DIGITAL
INPUT OUTPUT
OPTICAL
IN
LINE
LINE
L
OUT
R
D
D
A
A
OUT
IN
OUT
IN
ANTENNA 75Ω COAXIAL
FM
U
AM
DIGITAL
COMPONENT VIDEO
MONITOR
S2 VIDEO S2 VIDEO S2 VIDEO
OUT
CTRL
A1
TV/SAT DVD/LD
VIDEO 2
VIDEO 1
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
IN
IN
OUT
OUT
IN
IN
MD/DAT
OPTICAL
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
Notes
• You cannot make a digital recording of digital multi channel surround signals.
• All the OPTICAL and COAXIAL jacks are compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling
frequencies.
• It is not possible to record analog signals to the components connected to TAPE and VIDEO jacks with only
digital connections. To record analog signals, make analog connections. To record digital signals, make analog
and digital connections.
• The sound is not output when you play a SACD disc on the SACD player connected to the CD/SACD
OPTICAL IN jack on this unit. Connect to the analog input jacks (CD/SACD IN jacks). Refer to the operating
instructions supplied with the SACD player.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi channel input hookups
Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel
input jacks. These connections allow you to enjoy multi channel software encoded in formats other
than Dolby Digital and DTS. If your DVD player is equipped with multi channel output jacks, you
can connect them directly to the receiver to enjoy the sound of the DVD player’s multi channel
decoder. Alternatively, the multi channel input jacks can be used to connect an external multi channel
decoder.
To fully enjoy multi channel surround sound, five speakers (two front speakers, two surround
speakers, and a center speaker) and a sub woofer are required. For 6.1 channel surround sound, you
will also need a surround back speaker. Refer to the operating instructions supplied with your DVD
player, multi channel decoder, etc., for details on the multi channel hookups.
Notes
• When using the connections described below, adjust the level of the surround speakers and sub woofer from the
DVD player or multi channel decoder.
• See page 16 for details on speaker system hookup.
ANTENNA 75Ω COAXIAL
FM
U
AM
DIGITAL
COMPONENT VIDEO
MONITOR
TV/SAT DVD/LD
CTRL
A1
VIDEO 2
VIDEO 1
S2 VIDEO S2 VIDEO S2 VIDEO
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
MD/DAT
OPTICAL
IN
OUT
OUT
IN
IN
OUT
OUT
IN
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
MULTI CHANNEL INPUT 1
A
A
F
F
F
MULTI CHANNEL INPUT 2
FRONT SURROUND SURR BACK CENTER
L
R
SUB
WOOFER
MULTI CH OUT
DVD player,
Multichannel decoder, etc.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Other hookups
CONTROL A1
ANTENNA 75Ω COAXIAL
FM
U
AM
COMPONENT VIDEO
MONITOR
TV/SAT DVD/LD
DIGITAL
CTRL
A1
VIDEO 2
VIDEO 1
S2 VIDEO S2 VIDEO S2 VIDEO
S2 VIDEO
S2 VIDEO
TV/SAT IN DVD/LD IN MONITOR OUT
OUT
IN
IN
OUT
IN
OUT
IN
CD/SACD
OPTICAL
IN
Y
ND/DAT
OPTICAL
OUT
C
B/B-Y
2ND
ROOM
VIDEO
OUT
VIDEO
IN
VIDEO
IN
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
IN
IN
OUT
OUT
IN
IN
MD/DAT
OPTICAL
IN
CR/R-Y
TV/SAT
OPTICAL
IN
VIDEO OUT
AUDIO
OUT
PHONO CD/SACD
IN IN
MD/DAT
IN
TAPE
AUDIO
IN
AUDIO
IN
OUT
OUT
IN
DVD/LD
OPTICAL
IN
L
CD/SACD
COAXIAL
IN
R
SUB WOOFER
FRONT SURROUND CENTER FRONT SURROUND SURR BACK CENTER
FRONT SURROUND SURR BACK
CENTER
DVD/LD
COAXIAL
IN
SIGNAL GND
U
ASSIGNABLE
SUB WOOFER
SUB WOOFER
MULTI CHANNEL INPUT
2
MULTI CHANNEL INPUT 1
PRE OUT
*
2ND ROOM OUT
* This jack is intended only for use in the manufacturing and servicing of the unit.
• If you have a Sony CD changer with a
COMMAND MODE selector
CONTROL A1 hookup
If your CD changer’s COMMAND MODE
selector can be set to CD 1, CD 2, or CD 3,
be sure to set the command mode to “CD 1”
and connect the changer to the CD jacks on
the receiver.
• If you have a CONTROL A1 compatible
Sony CD player, SACD player, tape
deck, or MD deck
Use a CONTROL A1 cord (mini jack) (not
supplied) to connect the CONTROL A1
jack on the CD player, SACD player, tape
deck, or MD deck to the CONTROL A1
jack on the receiver. Refer to “CONTROL
A1 control system” on page 53 and the
operating instructions supplied with your CD
player, SACD player, tape deck, or MD deck
for details.
If, however, you have a Sony CD changer
with VIDEO OUT jacks, set the command
mode to “CD 2” and connect the changer to
the VIDEO 2 jacks on the receiver.
continued
Note
If you make CONTROL A1 connections from
the receiver to an MD deck that is also connected
to a computer, do not operate the receiver while
using the “Sony MD Editor” software. This may
cause a malfunction.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Other hookups (continued)
Connecting the AC power
cord
2ND ROOM hookup
Before connecting the AC power cord of this
receiver to a wall outlet, connect the speaker
system to the receiver (see page 16).
You can use the 2ND ROOM OUT jacks to
output the audio/video signals of the selected
component to a stereo amplifier located in
another room (see page 29).
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
AC OUTLET*
Setting the voltage selector
If your receiver has a voltage selector on the
rear panel, check that the voltage selector is set
to the local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord
to a wall outlet.
AC OUTLET
SPEAKERS
R
SURROUND
L
CENTER
SURR BACK
+
SURR
BACK
R
SURR
BACK
L
–
R
SURROUND
L
CENTER
SURR BACK
VOLTAGE SELECTOR
120V 240V
220V
IMPEDANCE SELECTOR
4
Ω
8
Ω
AC IN terminal
* Except for models of area code CN.
The configuration, shape, and number of AC outlets
vary according to the model and country to which
the receiver is shipped.
Connect the supplied power cord to the AC IN
terminal on this unit.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• (Models of area code E only) Two AC power cords
are supplied. Use either AC power cord that fits
your wall outlet.
• We recommend that you connect this unit directly
to a wall outlet. If you must use a multi-outlet tap,
or extension cord, be sure to use one capable of
handling high current (at least 10 A) or one
designed for office use.
If you connect other audio/video components to
the AC OUTLET(s) on the receiver, the
receiver will supply power to the connected
component(s), allowing you to turn the whole
system on or off when you turn the receiver on
or off.
Caution
Make sure that the total power consumption of the
component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or TVs
to this outlet.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up and Setting Up the Speaker System
Speaker system hookup
Required cords
A Speaker cords (not supplied)
(+)
(+)
(–)
(–)
B Monaural audio cord (not supplied)
Black
Black
C Audio cord (not supplied)
White (L)
Red (R)
White (L)
Red (R)
Surround speaker
(R)
Surround speaker
(L)
Active sub woofer
Surround back
speaker*
INPUT
AUDIO
IN
E
e
e
e
E
E
A
B
A
A
IMPEDANCE USE 4-16Ω
FRONT
R L
AC OUTLET
SPEAKERS
R
SURROUND
L
CENTER
SURR BACK
CTRL
A1
VIDEO 2
S2 VIDEO
VIDEO 1
S2 VIDEO
OUT
IN
OUT
IN
+
+
SURR
BACK
R
SURR
BACK
L
2ND
ROOM
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
IN
IN
OUT
OUT
IN
IN
–
–
VIDEO OUT
AUDIO
OUT
R
FRONT
L
R
SURROUND
L
CENTER
SURR BACK
IMPEDANCE SELECTOR
4
Ω
8
Ω
SUB WOOFER
FRONT SURROUND SURR BACK
CENTER
PRE OUT
IMPEDANCE
SELECTOR
A
A
A
e
e
E
E
e E
Front speaker (R)
Front speaker (L)
Center speaker*
* You can use the connected center and surround back speakers as surround back right and left speakers. (See
“Selecting the 7.1 channel mode” on page 28.) Make sure to connect correctly as indicated on the rear panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• You can connect an active sub woofer to either of the two jacks. The remaining jack can be used to connect a
second active sub woofer. As the active sub woofer does not have the directivity, you can place it wherever you
want.
• To connect certain speakers to another power amplifier, use the PRE OUT jacks. The same signal is output from
both the SPEAKERS jacks and the PRE OUT jacks. For example, if you want to connect just the front speakers
to another amplifier, connect that amplifier to the PRE OUT FRONT L and R jacks.
7.1 channel speaker hookup
Connect the speakers as follows to enjoy 7.1 channel mode using real speakers for all 7.1 channels.
These connections require an additional power amplifier. Connect the additional power amplifier to
the PRE OUT SURR BACK terminals on this receiver. Then connect the surround back (L/R)
speakers to the additional amplifier. For details on the 7.1 channel mode, see page 28.
Surround speaker
(R)
Surround speaker
(L)
Active sub woofer
INPUT
AUDIO
IN
E
e
e
E
A
B
A
IMPEDANCE USE 4-16Ω
AC OUTLET
SPEAKERS
R L
R
FRONT
L
SURROUND
CENTER
SURR BACK
CTRL
A1
VIDEO 2
VIDEO 1
S2 VIDEO
S2 VIDEO
OUT
IN
OUT
IN
+
+
SURR
BACK
R
SURR
BACK
L
2ND
ROOM
VIDEO
AUDIO
VIDEO
AUDIO
OUT
OUT
IN
IN
OUT
OUT
IN
IN
–
–
VIDEO OUT
AUDIO
OUT
R
FRONT
L
R
SURROUND
L
CENTER
SURR BACK
IMPEDANCE SELECTOR
4
Ω
8
Ω
SUB WOOFER
FRONT SURROUND SURR BACK
CENTER
PRE OUT
A
A
A
C
AUDIO IN
e
e
E
E
e E
Stereo amplifier
Front speaker (R)
Front speaker (L)
Center speaker
SPEAKERS
A
A
e
E
e E
Surround back
speaker (R)
Surround back
speaker (L)
continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker system hookup (continued)
Performing initial setup
operations
Speaker impedance
To enjoy multi channel surround, connect front,
center, surround, and surround back speakers
with a nominal impedance of 8 ohms or higher,
and set the IMPEDANCE SELECTOR to
“8Ω”. Check the operating instructions
supplied with your speakers if you’re not sure
of their impedance. (This information is
usually printed on a label on the back of the
speaker.)
Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.
Tip
To check the audio output during settings (to set up
while outputting the sound), check the connection
(see page 25).
You may connect a pair of speakers with a
nominal impedance between 4 and 8 ohms to
all of the speaker terminals. However, even if
one speaker within this range is connected, set
the IMPEDANCE SELECTOR to “4Ω”.
Clearing the receiver’s
memory
Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.
Note
Be sure to turn the power off when setting the
IMPEDANCE SELECTOR.
1 Turn off the receiver.
2 Hold down ?/1 for 5 seconds.
“ENTER to Clear All” appears in the
display.
3 Press ENTER.
After “MEMORY CLEARING...” appears
in the display for a while, “MEMORY
CLEARED!” appears. All of the following
items are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to
their factory settings.
• All index names (of preset stations and
program sources) are cleared.
• All SET UP parameters are reset to
their factory settings.
• The sound field memorized for each
program source and preset stations are
cleared.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
When placing surround speakers behind you
Performing initial setup
operations
B
Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 84. See pages
19–24 for speaker settings and pages 50–52 for
other settings.
A
A
45°
C
C
90°
D
20°
Multi channel surround
setup
Note
Do not place the center speaker farther away from the
listening position than the front speakers.
For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).
Tip
When setting up the surround back speaker, set the
speaker at least 1 meter behind the listening position.
It is recommended to place the speaker at an equal
distance from the surround left and right speakers. If
there is no space behind the listening position, set the
speaker above the listening position by placing it on a
stand or hanging it from the ceiling. To prevent
speaker damage or injury in case the speaker falls,
make sure that it is properly fixed in place.
However, the receiver lets you to place the
center speaker up to 1.5 meters closer (B), the
surround speakers up to 4.5 meters closer (C)
and the surround back speakers up to
4.5 meters closer (D) to the listening position.
The front speakers can be placed from 1.0 to
12.0 meters from the listening position (A).
Specifying the speaker
parameters
You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).
1 Press SET UP.
You can use the center and surround back
speakers as surround back right and left
speakers.
2 Press the cursor buttons ( or ) to
select the parameter you want to
adjust.
3 Turn the jog dial to select the setting
When placing surround speakers to your side
you want.
The setting is entered automatically.
B
4 Repeat steps 2 and 3 until you have set
A
A
all of the parameters that follow.
45°
C
C
continued
90°
D
20°
19
Download from Www.Somanuals.com. All Manuals Search And Download.
x Center speaker size (CENTER)
Multi channel surround setup
(continued)
•
•
•
If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the center speaker to
“LARGE”.
Initial settings
Parameter
Initial setting
FRONT SP
LARGE
CENTER SP
LARGE
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.*1
SURROUND SP
SURR BACK SP
SURR BACK L/R
SUB WOOFER
FRONT
LARGE
LARGE
NO
YES
5.0 meter
5.0 meter
3.5 meter
3.5 meter
5.0 meter
NORMAL
meter
If you do not connect a center speaker, select
“NO”. The sound of the center channel will be
output from the front speakers.*2
CENTER
SURROUND
SURR BACK
SUB WOOFER
S.W PHASE
x Surround speaker size (SURROUND)
•
•
•
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to “LARGE”.
DISTANCE UNIT
SURR POSI.
SIDE
SURR HEIGHT
SURR BACK HGT.
FRONT SP >*
CENTER SP >*
SURROUND SP >*
SURR BACK SP >*
LFE HIGH CUT >
LOW
LOW
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other “LARGE” speakers.
STD (120 Hz)
STD (120 Hz)
STD (120 Hz)
STD (120 Hz)
STD (120 Hz)
If you do not connect surround speakers, select
“NO”.*3
* When the speakers are set to SMALL only.
x Front speaker size (FRONT)
Tip
•
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
*1–*3 correspond to the following Dolby Pro Logic
modes
*1 NORMAL
*2 PHANTOM
*3 3 STEREO
•
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
•
When the front speakers are set to “SMALL”,
the center, surround, and surround back
speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
x Surround back speaker size
x Surround back speaker single or
(SURR BACK)
double (SURR BACK L/R)
•
•
•
If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround back
speaker to “LARGE”.
• When the center speaker is set to “NO” and you
use the center speaker as a surround back right
speaker and use the surround back speaker as a
surround back left speaker, select “YES”.
•
If you use only a surround back speaker, select
“NO”.
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.
If you do not connect a surround back speaker,
select “NO”.
Tip
x Sub woofer selection (SUB WOOFER)
Internally, the LARGE and SMALL settings for each
speaker determine whether or not the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
•
•
If you connect a sub woofer, select “YES”.
If you do not connect a sub woofer, select
“NO”. This activates the bass redirection
circuitry and outputs the LFE signals from other
speakers.
However, since bass sounds have a certain amount of
directionality, it best not to cut them, if possible.
Therefore, even when using small speakers, you can
set them to “LARGE” if you want to output the bass
frequencies from that speaker. On the other hand, if
you are using a large speaker, but prefer not to have
bass frequencies output from that speaker, set it to
“SMALL”.
If the overall sound level is lower than you prefer, set
all speakers to “LARGE”. If there is not enough bass,
you can use the equalizer to boost the bass levels. To
adjust the equalizer, see page 41.
•
In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend setting the sub woofer’s cut off
frequency as high as possible.
x Front speaker distance (FRONT)
Set the distance from your listening position to
the front speakers (A on page 19).
x Center speaker distance (CENTER)
Set the distance from your listening position to
the center speaker. Center speaker distance
should be set from a distance equal to the front
speaker distance (A on page 19) to a distance
1.5 meters closer to your listening position (B
on page 19). When this range is exceeded, the
display blinks. If you make the setting while
the display blinks, you cannot fully enjoy the
surround effect.
continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Multi channel surround setup
(continued)
The receiver allows you to input the speaker position
in terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more that
1.5 meters closer than the front speakers.
Likewise, the surround and surround back speakers
can not be set farther away from the listening position
than the front speakers. And they can be no more than
4.5 meters closer.
This is because incorrect speaker placement is not
conducive to the enjoyment of surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is farther
away.
x Surround speaker distance
(SURROUND)
Set the distance from your listening position to
the surround speakers. Surround speaker
distance should be set from a distance equal to
the front speaker distance (A on page 19) to a
distance 4.5 meters closer to your listening
position (C on page 19). When this range is
exceeded, the display blinks. If you make the
setting while the display blinks, you cannot
fully enjoy the surround effect.
x Surround back speaker distance
For example, setting the center speaker distance
1–2 meters closer than the actual speaker position will
create a fairly realistic sensation of being “inside” the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound
stage.
(SURR BACK)
Set the distance from your listening position to
the surround back speaker(s). Surround back
speaker distance should be set from a distance
equal to the front speaker distance (A on page
19) to a distance 4.5 meters closer to your
listening position (D on page 19). When this
range is exceeded, the display blinks. If you
make the setting while the display blinks, you
cannot fully enjoy the surround effect.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
x Sub woofer phase polarity (S.W
PHASE)
x Sub woofer distance (SUB WOOFER)
Set the distance from your listening position to
the sub woofer.
Set the sub woofer phase polarity. There is
usually no problem when the sub woofer phase
polarity is set to “NORMAL”. However,
depending on the type of front speakers, the
position of the sub woofer, and the cut-off
frequency of the sub woofer, setting the phase
polarity to “REVERSE” may produce better
bass. Besides bass reproduction, the richness
and tightness of the overall sound may also be
affected. While listening from the main
listening position, select the setting that best
suits your environment.
x Distance unit (DISTANCE UNIT)
Lets you select either feet or meters as the unit
of measure for setting distances.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
x Surround speaker position (SURR
x Surround speaker height (SURR
HEIGHT)*/Surround back speaker
height (SURR BACK HGT.)**
POSI.)*
This parameter lets you specify the location of
your surround speakers for proper
implementation of the Digital Cinema Sound
surround modes in the “VIRTUAL” sound
fields. Refer to the illustration below.
This parameter lets you specify the height of
your surround and surround back speaker(s) for
proper implementation of the Digital Cinema
Sound surround modes in the “VIRTUAL”
sound fields. Refer to the illustration below.
•
•
•
Select “SIDE” if the location of your surround
speakers corresponds to section A.
This setting only effects the surround modes in
the “VIRTUAL” sound fields.
Select “MIDDLE” if the location of your
surround speakers corresponds to section B.
Select “BEHIND” if the location of your
surround speakers corresponds to section C.
This parameter is available only when the
surround back speaker size is set to “NO”.
B
A
B
A
60
30
This setting only effects the surround modes in
the “VIRTUAL” sound fields.
*
These parameters are not available when
“Surround speaker size (SURROUND)” is set to
“NO”.
** This parameter is not available when “Surround
back speaker size (SURR BACK)” is set to “NO”.
90°
A
A
60°
30°
B
B
continued
C
C
20°
*
These parameters are not available when
“Surround speaker size (SURROUND)” is set to
“NO”.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
x Surround back speaker crossover
Multi channel surround setup
(continued)
frequency (SURR BACK SP >)
Lets you adjust the surround back speaker bass
crossover frequency when the surround back
speaker is set to “SMALL”.
Tip
The surround/surround back speaker position
parameter is designed specifically for implementation
of the Digital Cinema Sound modes in the
Note
“VIRTUAL” sound fields.
You can set the FRONT, CENTER, SURROUND
and SURR BACK parameters when the speaker size
is set to “SMALL”.
With the Digital Cinema Sound modes, speaker
position is not as critical as other modes. All of the
modes in the “VIRTUAL” sound fields were
designed under the premise that the surround speaker
would be located behind the listening position, but
presentation remains fairly consistent even with the
surround speakers positioned at a rather wide angle.
However, if the speakers are pointing toward the
listener from the immediate left and right of the
listening position, the “VIRTUAL” sound fields will
not be effective unless the surround speaker position
parameter is set to “SIDE”.
x LFE high cut filter (LFE HIGH CUT >)
Lets you select the cut off frequency of the
LFE channel high cut filter. Normally, select
“STD”. When using a passive sub woofer
powered by a separate power amplifier, it may
be better to change the cut off frequency.
Nevertheless, each listening environment has many
variables, like wall reflections, and you may obtain
better results using “BEHIND” or “MIDDLE” if your
speakers are located high above the listening position,
even if they are to the immediate left and right.
Therefore, although it may result in a setting contrary
to the “Surround speaker position” explanation, we
recommend that you playback multi channel surround
encoded software and listen to the effect each setting
has on your listening environment. Choose the setting
that provides a good sense of spaciousness and that
best succeeds in forming a cohesive space between
the surround sound from the surround speakers and
the sound of the front speakers. If you are not sure
which sounds best, select “BEHIND” and then use
the speaker distance parameter and speaker level
adjustments to obtain proper balance.
x Front speaker crossover frequency
(FRONT SP >)
Lets you adjust the front speaker bass crossover
frequency when the front speakers are set to
“SMALL”.
x Center speaker crossover frequency
(CENTER SP >)
Lets you adjust the center speaker bass
crossover frequency when the center speaker is
set to “SMALL”.
x Surround speaker crossover frequency
(SURROUND SP >)
Lets you adjust the surround speaker bass
crossover frequency when the surround
speakers are set to “SMALL”.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Adjusting the speaker level
• The adjusted value are shown in the display during
adjustment.
Use the remote while seated in your listening
position to adjust the level of each speaker.
• Although these adjustments can also be made via
the front panel using the LEVEL menu (when the
test tone is output, the receiver switches to the
LEVEL menu automatically), we recommend you
follow the procedure described above and adjust the
speaker levels from your listening position using the
remote.
Note
The receiver incorporates a new test tone with a
frequency centered at 800 Hz for easier speaker level
adjustment.
• When you select analog audio using the MULTI/
2CH ANALOG DIRECT button, the power of the
digital circuits is turned off.* Therefore, when you
output the test tone in this setting, it requires a few
seconds to output the test tone. However, this is not
a malfunction.
1 Press ?/1 to turn on the receiver.
2 Press TEST TONE on the remote.
You will hear the test tone from each
speaker in sequence.
* When “D.POWER” is set to “AUTO OFF” in the
SET UP menu.
3 Adjust the LEVEL parameters so that
the level of the test tone from each
speaker sounds the same when you are
in your main listening position
(page 39).
Checking the connections
4 Press TEST TONE again to turn off the
After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
test tone.
To output the test tone from a
selected speaker
Use the LEVEL menu to set “TEST TONE” to
“FIX” (page 40). The test tone is output only
from the selected speaker.
1 Press ?/1 to turn on the receiver.
2 Turn on the component that you
connected (e.g., CD player or tape
deck).
For more precise speaker level
adjustment
3 Rotate FUNCTION to select the
component (program source).
You can output the test tone or sound source
from two adjacent speakers to adjust balance,
phase, and equalization. Set the SET UP menu
to test tone (T.TONE) and select the sound to
be output (test tone or sound source) (page 52).
Then, select the test tone parameter from the
the LEVEL menu to select the two speakers
you want to adjust (page 39).
4 Start playing.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 76 and take the
appropriate measures to correct the problem.
Tips
• You can adjust the level of all speakers at the same
time. Turn MASTER VOLUME on the main unit or
press MASTER VOL +/– on the remote.
• You can use the jog dial on the receiver for the
adjustment.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
AUDIO SPLIT
Selecting the component
Press AUDIO SPLIT to assign the audio input
for each function. This function is convenient
when you are using a number of digital
components. You can select the audio input
assigned by this function using INPUT MODE
(page 27).
FUNCTION control
Turn FUNCTION control to select the
component you want to use.
You cannot assign the audio input for TUNER.
To select
Rotate to light
VIDEO 1 or VIDEO 2
VIDEO 3
1 Turn FUNCTION to select the source for
VCR
audio input assignment.
Camcorder or
video game
2 Press AUDIO SPLIT.
3 Turn FUNCTION to select the audio input.
The audio input you can assign differs
depending on the function.
DVD or LD player
TV or satellite tuner
Tape deck
DVD/LD
TV/SAT
TAPE
DVD/LD, CD/SACD
MD or DAT deck
CD/SACD player
Built in tuner
MD/DAT
CD/SACD
TUNER
PHONO
NO ASSIGN t DIGITAL: ONLY COAX t
DIGITAL: ONLY OPT t ONLY ANALOG
INPUT
Turntable
TV/SAT, MD/DAT
NO ASSIGN t DVD/LD (COAXIAL) t
CD/SACD (COAXIAL) t ONLY ANALOG
INPUT
After turning on the component you selected,
select the component and play the program
source.
Analog functions except for PHONO
•
After selecting VCR, camcorder, video game,
DVD player, or LD player, turn on the TV and
set the TV’s video input to match the
component you selected.
NO ASSIGN t DVD/LD (COAXIAL) t
DVD/LD (OPTICAL) t TV/SAT (OPTICAL)
t MD/DAT (OPTICAL) t CD/SACD
(COAXIAL) t CD/SACD (OPTICAL)
PHONO
NO ASSIGN t VIDEO 1 t VIDEO 2 t
VIDEO 3 t DVD/LD (ANALOG) t
TV/SAT (ANALOG) t TAPE t MD/DAT
(ANALOG) t CD/SACD (ANALOG)
4 Press AUDIO SPLIT.
If you do not press AUDIO SPLIT within
8 seconds, the receiver automatically assigns
the selected audio input.
Tips
• If you do not assign, select “NO ASSIGN”.
• If you select “DIGITAL: ONLY COAX” or
“DIGITAL: ONLY OPT” for DVD/LD, only
coaxial or optical digital input is automatically
selected for DVD/LD.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT MODE
MULTI/2CH ANALOG DIRECT
Press INPUT MODE to select the input mode
for your digital components. You can also
select the COAXIAL or OPTICAL audio input
of other functions assigned by AUDIO SPLIT.
Each time you press the button, the input mode
of the currently selected component switches.
Press MULTI/2CH ANALOG DIRECT to
enjoy the audio source connected to the
MULTI CH IN 1 or 2 jacks or analog 2
channel input jacks. Only volume control and
the front speaker balance can be adjusted
when set to 2CH ANALOG DIRECT. When
set to MULTI CH 1 or 2 DIRECT, you can
adjust balance and level of all the speakers.
When this function is on, the surround effects
are turned off.
Select
To
AUTO 2CH
Give priority to the analog
audio signals input to the
AUDIO IN (L/R) jacks
when there is no digital
signals.
Select
To
MULTI CH 1 or 2 Enjoy the audio source
COAXIAL FIXED
OPTICAL FIXED
Specify the digital audio
signals input to the
DIGITAL COAXIAL input
jacks.
DIRECT
connected to the MULTI CH IN
1 or 2 jacks. MULTI CH IN 1
or 2 indicator lights up in the
display. This mode is suitable
for enjoying high quality analog
source.
Specify the digital audio
signals input to the
DIGITAL OPTICAL input
jacks.
2CH ANALOG
DIRECT
Enjoy the audio source
connected to analog 2 channel
jacks. This mode is suitable for
enjoying high quality analog
source.
ANALOG 2CH FIXED Specify the analog audio
signals input to the AUDIO
IN (L/R) jacks.
When the MULTI CH 1 or 2 is assigned to a
specific function using SET UP menu (page
50), the followings are displayed instead of
“AUTO 2CH” and “ANALOG 2CH FIXED”.
SPEAKERS switch
Select
To
ON
Output the sound from the speakers
connected to the SPEAKERS
terminals.
Select
To
AUTO MULTI CH
1 or 2
Give priority to the analog
audio signals input to the
MULTI CH IN 1 or 2 jacks
when there is no digital
signals.
OFF
No speaker output.
MUTING
Press MUTING to mute the sound.
“MUTING” appears in the display when the
sound is muted. The muting function is
canceled when you turn the MASTER
VOLUME clockwise to turn the volume up.
MULTI CH 1 or 2
FIXED
Specify the analog audio
signals input to the MULTI
CH IN 1 or 2 jacks.
continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the component (continued)
To connect the speakers
See page 16.
PHONES
Before using the 7.1 channel mode
Use to connect headphones.
Set “Center speaker size (CENTER)” to “NO”
and set “Surround back speaker single or
double (SURR BACK L/R)” to “YES”. For
details on the setting, see pages 20–21.
When the headphones are connected, selectable
sound fields are HEADPHONE (2CH),
HEADPHONE (DIRECT), and HEADPHONE
THEATER (see page 32).
When connecting an
additional amplifier to
reproduce all 7.1 channels
using real speakers
Note
When “HEADPHONE (MULTI 1)” or
“HEADPHONE (MULTI 2)” appears in the display
while the headphones are connected, only the front L/
R signals of the multi channels are output from the
headphones. Press MULTI/2CH ANALOG DIRECT
to cancel “MULTI CH 1 (or 2) DIRECT” (page 27).
If you have another stereo power amplifier, you
can enjoy the 7.1 channel mode using real
speakers for all 7.1 channels. Connect the
Surround back (L/R) speakers through your
other amplifier.
Selecting the 7.1 channel
mode
STR-VA555ES
L
SW
C
R
The 7.1 channel mode applies DSP (Digital
Signal Processor) technology to 6.1 channel
encoded audio in order to reproduce the
surround back channel in stereo (L/R). There
are two ways to select the 7.1 channel mode.
Make speaker connections and settings as
described below.
PRE OUT
SL
SR
SBL
SBR
Stereo amplifier
To connect the speakers and the
amplifier
See page 17.
When using only the
speakers connected to this
receiver
Before using the 7.1 channel mode
You can enjoy the 7.1 channel mode sound
using only the actual 6.1 channel speakers
connected to this receiver. Select the center
speaker to be used as the surround back right
speaker, and set the surround back speaker to
be used as the surround back left speaker. The
sound of the center channel will be downmixed
to other channels.
Set “Center speaker size (CENTER)” to
“LARGE” or “SMALL” according to the
connected center speaker, then set “Surround
back speaker single or double (SURR BACK
L/R)” to “YES”. For details on the setting, see
pages 20–21.
Note
No sound is output from the SPEAKERS SURR
L
SW
R
BACK terminals.
SL
SR
SBL
SBR
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the sound in
another room
Changing the display
DISPLAY
5
4
6
Press repeatedly to change the information on
the display window.
3
7
1
/
u
2
8
1
9
0
10
A
OFF
B
A
+
B
–
+
–
+
–
+
DIMMER
Press DIMMER repeatedly to adjust the
brightness of the display (5 steps). DIMMER
indicator lights when the dimmer function is
activated.
2ND ROOM OUT
AUDIO IN
Stereo amplifier
SPEAKERS
You can select the analog audio signals for
output to a stereo amplifier in another room.
For details on the connection, see page 13.
1 Press 2ND ROOM.
2 Turn the jog dial to select the analog
audio signals.
The audio source changes cyclically as
follows:
SOURCE* t VIDEO 1 t VIDEO 2 t
VIDEO 3 t DVD/LD t TV/SAT t
TAPE t MD/DAT t CD/SACD t
TUNER
* The audio signals of the current function is
output.
Tips
• When “SOURCE” is selected, the signals input to
the MULTI CH IN jacks are not output from the
2ND ROOM OUT jacks even when MULTI/2CH
ANALOG DIRECT is set to MULTI CH 1 or 2
DIRECT. The analog audio signals of the current
function are output.
• Only signals from components connected to the
analog input jacks are output through the 2ND
ROOM OUT jacks. No signals are output from
components connected to only the digital input
jacks.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Surround Sound
About DCS (Digital Cinema Sound)
You can take advantage of surround sound
simply by selecting one of the receiver’s
pre-programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home. You can also
customize the sound fields to obtain the sound
you want by changing the various surround
parameters.
To fully enjoy surround sound, you must
register the number and location of your
speakers. See “Multi channel surround setup”
starting from page 19 to set the speaker
parameters before enjoying surround sound.
The sound fields with DCS marks use DCS
technology. When these sound fields are
selected, “Digital Cinema Sound” indicator in
the display lights up.
DCS is the concept name of the surround
technology for home theater developed by
Sony. DCS uses the DSP (Digital Signal
Processor) technology to reproduce the sound
characteristics of an actual cinema cutting
studio in Hollywood.
When played at home, DCS will create a
powerful theater effect that mimics the artistic
combination of sound and action as envisioned
by the movie director.
Selecting a sound field
x NORMAL SURROUND
Software with multi channel surround audio
signals is played back according to the way it
was recorded. Software with 2 channel audio
signals is decoded with Dolby Pro Logic to
create surround effects.
You can enjoy surround sound simply by
selecting one of the pre-programmed sound
fields according to the program you want to
listen to.
Press MODE +/– repeatedly to select the
sound field you want.
x CINEMA STUDIO EX A–C1)2) DCS
Uses 3D sound imaging of V. MULTI
The current sound field is indicated in the
display. See pages 30–32 for information on
each sound field.
DIMENSION (page 31) to create 5 sets of
virtual speakers surrounding the listener from a
single pair of actual surround speakers.
Though this receiver incorporates the 6.1
channel amplifier, you can reproduce the 6.1
channel surround sound with the 5.1 channel
speaker settings by creating the virtual
To turn the surround effect off
Press A.F.D., 2CH, or MULTI/2CH ANALOG
DIRECT (page 32).
Tips
surround back speaker through the “VIRTUAL
MATRIX 6.1” playback function (page 33).
• You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo, and Dolby Surround encoded programs are
labeled with the A logo.
• When sound signals with a sampling frequency of
more than 48 kHz are input, the sound signals are
output in stereo automatically, and the sound field is
turned off.
•
CINEMA STUDIO EX A reproduces the sound
characteristics of Sony Pictures Entertainment’s
classic editing studio.
•
CINEMA STUDIO EX B reproduces the sound
characteristics of Sony Pictures Entertainment’s
mixing studio which is one of the most up-to-
date facilities in Hollywood.
• You can change the name of the sound field (see
page 48).
•
CINEMA STUDIO EX C reproduces the sound
characteristics of Sony Pictures Entertainment’s
BGM recording studio.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
x SEMI C.STUDIO EX A–C1) (Semi
x VIRTUAL MULTI REAR1) (Virtual Multi
Cinema Studio EX A–C)DCS
Rear) DCS
Uses 3D sound imaging of V. SEMI M.
DIMENSION to create 5 sets of virtual
speakers surrounding the listener from the
sound of the front speakers (without using
actual surround speakers).
You can reproduce the 6.1 channel surround
sound by creating the virtual surround back
speaker through the “VIRTUAL MATRIX 6.1”
playback function (page 33).
Uses 3D sound imaging to create 3 sets of
virtual surround speakers from 1 set of actual
surround speakers.
x V.SEMI M.DIMENSION1) (Virtual Semi
Multi Dimension) DCS
Uses 3D sound imaging to create virtual
surround speakers from the sound of the front
speakers without using actual surround
speakers. This mode creates 5 sets of virtual
speakers surrounding the listener at a 30° angle
of elevation.
•
SEMI C.STUDIO EX A reproduces the sound
characteristics of Sony Pictures Entertainment’s
classic editing studio.
x VIRTUAL ENHANCED A1) (Virtual
•
SEMI C.STUDIO EX B reproduces the sound
characteristics of Sony Pictures Entertainment’s
mixing studio which is one of the most up-to-
date facilities in Hollywood.
Enhanced Surround A) DCS
Uses 3D sound imaging to create 3 sets of
virtual surround speakers from the sound of the
front speakers without using actual surround
speakers.
•
SEMI C.STUDIO EX C reproduces the sound
characteristics of Sony Pictures Entertainment’s
BGM recording studio.
x VIRTUAL ENHANCED B1) (Virtual
x NIGHT THEATER
Enhanced Surround B) DCS
Allows you to retain a theater like environment
while listening at low volume levels, such as
late at night.
Uses 3D sound imaging to create 1 set of
virtual surround speakers from the sound of the
front speakers without using actual surround
speakers.
x MONO MOVIE
Creates a theater like environment from movies
with monaural soundtracks.
x D.CONCERT HALL A, B2) (Digital
Concert Hall A, B)
Reproduces the acoustics of a concert hall
using multi-speaker system and 3D sound
imaging for software with 2 channel signals
like CDs.
x STEREO MOVIE
Creates a theater like environment from movies
recorded with stereo soundtracks.
x V.MULTI DIMENSION1) (Virtual Multi
•
D.CONCERT HALL A reproduces the sonic
character of the CONCERTGEBOUW in
Amsterdam, which is famous for its large sound
stage due to its reflectivity.
Dimension) DCS
Uses 3D sound imaging to create an array of
virtual surround speakers positioned higher
than the listener from a single pair of actual
surround speakers. This mode creates 5 sets of
virtual speakers surrounding the listener at
approximately a 30° angle of elevation.
•
D.CONCERT HALL B reproduces the sonic
character of the MUSIKVEREIN in Vienna,
which is famous for its hall resonance and
unique reverberative sound.
continued
31
Download from Www.Somanuals.com. All Manuals Search And Download.
1) “VIRTUAL” sound field: Sound field with virtual
speakers. However, setting the SURROUND
menu “VIR. SPEAKERS” parameter to “OFF”
when using “CINEMA STUDIO EX A–C” or
“SEMI C.STUDIO EX A–C” reproduces the
sound characteristics of each cinema production
studio without virtual speakers.
Selecting a sound field (continued)
x CHURCH
Reproduces the acoustics of a stone church.
x OPERA HOUSE
2) You can select directly by pressing the buttons on
the front panel.
Reproduces the acoustics of an opera house.
Notes
x JAZZ CLUB
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
Reproduces the acoustics of a jazz club.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
x DISCO/CLUB
Reproduces the acoustics of a discotheque/
dance club.
Use the buttons on the front panel to operate
the following modes.
x LIVE HOUSE
Reproduces the acoustics of a 300-seat live
house.
A.F.D. (Auto Format Decoding)
Automatically detects the type of audio signal
being input (Dolby Digital, DTS, or standard 2
channel stereo) and performs the proper
decoding if necessary. This mode presents the
sound as it was recorded/encoded, without
adding any effects (ex. reverberation).
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
x ARENA
Reproduces the acoustics of a 1000-seat
concert hall.
x STADIUM
Reproduces the feeling of a large open-air
stadium.
x GAME
Obtains maximum audio impact from video
game software.
2CH (2 Channel)
Outputs the sound from the front left and right
speakers only. Standard 2 channel (stereo)
sources completely bypass the sound field
processing. Multi channel surround formats are
downmixed to 2 channel.
When headphones are connected, you can
select the following sound fields only:
x HEADPHONE (2CH)
There is no sound from the sub woofer.
Outputs the sound in 2 channel (stereo).
Standard 2 channel (stereo) sources completely
bypass the sound field processing. Multi
channel surround formats are downmixed to
2 channel.
MULTI/2CH ANALOG DIRECT (Multi/2ch
Analog Direct)
The analog input signal is not digitally
processed. You can enjoy high quality analog
source. Only volume control and the front
speaker balance can be adjusted when set to
2CH ANALOG DIRECT. When set to MULTI
CH 1 or 2 DIRECT, you can adjust balance and
level of all the speakers. When this function is
on, the equalizer, sound field (etc.) are turned
off.
x HEADPHONE (DIRECT)
Outputs the analog signals without digital
processing by the equalizer, sound field, etc.
x HEADPHONE THEATER
Allows you to experience a theater like
environment while listening through a pair of
headphones.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
NIGHT MODE
About DVD encoding and playback of
Surround EX (6.1 Channel) movies
The Surround EX System used in movie
theaters employs a matrix system to produce
6.1 channels from a 5.1 channel film
soundtrack. The matrix system reproduces the
sountrack as intended by the filmmaker. All
DVD software encoded with Dolby Digital,
DTS-ES Matrix 6.1, and DTS-ES Discrete 6.1
includes the 5.1 channel soundtrack designed
for use in movie theaters. Therefore it is
possible to change the soundtrack to the one
designed for use in movie theaters.
Allows you to retain a theater like environment,
at low volume levels even late at night. Even at
a low volume level, you can clearly hear the
dialogues and adjust the volume in small steps.
This function can be used with other sound
field (pages 30–32).
While this function is on, BASS, TREBLE, and
EFFECT level rises, and D.RANGE COMP. is
automatically set to “MAX”.
This function does not work while MULTI/
2CH ANALOG DIRECT is on.
Note
To enjoy 6.1 channel surround sound
(“VIRTUAL MATRIX 6.1” playback
function)
You can experience 6.1 channel surround
sound as if you are in a real theater.
No sound is output from the sub woofer when
“2CH” is selected. To listen to 2 channel (stereo)
sources using the front left and right speakers and a
sub woofer, select “A.F.D.”.
6.1CH DECODING
Press 6.1CH DECODING to select the
6.1 channel decoding mode. You can use the
SET UP menu to select the parameter
(page 50).
•
If you have a 2.0, 2.1, 3.0, 3.1, 5.0, 5.1 channel
speaker system
Use the “VIRTUAL MATRIX 6.1” playback
function.
This function works only for the multi channel
format [3/2], [3/2+1] or [3/3].
To effectively enjoy “VIRTUAL MATRIX
6.1” playback, use the 6.1CH DECODING
function when you select “CINEMA STUDIO
EX A–C” or “SEMI C.STUDIO EX A–C”. The
sound characteristics of CINEMA STUDIO and
the 3D sound imaging create a virtual surround
back speaker, and you can experience the
surround effect as if you are in a real theater.
You can select AUTO/ON/OFF using the
6.1CH DECODING button.
This function is effective for all the sound
fields.
Note
When you select “A.F.D.”, 6.1CH DECODING
setting automatically switches to “AUTO”, even if
previously set to “ON” or “OFF”in a different sound
field. When you switch back to one of the other sound
fields, 6.1CH DECODING setting returns to its
previous setting (“ON” or “OFF”).
•
If you have a 6.1 channel speaker system
When “NORMAL SURROUND” is selected,
set 6.1CH DECODING to “ON”.
continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a sound field (continued)
About 6.1 channel decoding mode
6.1CH
DECODING
Input
stream
Output
channel
Applied 6.1 channel
decoder
OFF
Dolby Digital
Dolby Digital EX1)
5.1
5.1
5.1
5.1
5.1
5.1
6.1
5.1
6.1
6.1
6.1
6.1
6.1
6.1
6.1
NO
NO
DTS 5.1
NO
DTS-ES Matrix 6.12)
DTS-ES Discrete 6.13)
Dolby Digital
NO
NO
AUTO
NO
Dolby Digital EX
DTS 5.1
Sony DCMD4)
NO
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
Dolby Digital
DTS matrix decoder
DTS discrete decoder
Sony DCMD
Sony DCMD
Sony DCMD
Sony DCMD
Sony DCMD
ON
Dolby Digital EX
DTS 5.1
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
1) Dolby Digital EX
Dolby Digital DVD that includes a Surround EX flag. The Dolby Corporation web page can help you distinguish
Surround EX films. Set 6.1 Channel Decoding to “ON” when enjoying these movies.
2) DTS-ES Matrix 6.1
Software encoded with a flag to denote it has both Surround EX and 5.1 channel signals.
Set 6.1 Channel Decoding to “AUTO” to activate the matrix decoder provided by DTS Corporation. Set to “ON”
to activate Sony DCMD.
3) DTS-ES Discrete 6.1
Software encoded with both 5.1 channel signals and an extension stream designed for returning those signals to 6.1
discrete channels. Discrete 6.1 channel signals are DVD specific signals not used in movie theaters.
Set 6.1 Channel Encoding to “AUTO” to play the discrete 6.1 channel signals. Set 6.1 Channel Decoding to “ON”
to activate Sony DCMD and play 6.1 channel signals equivalent to those that would be used in a movie
theater.
4) Sony DCMD (Digital Cinema Matrix Decoder) system
Sony DCMD is a high fidelity 6.1 channel matrix decoder developed by Sony. This decoder has the same function
as that used in movie theaters. It can be used with all Surround EX formats (Dolby Digital EX, DTS-ES Matrix
6.1, and DTS-ES Discreet 6.1). Sony DCMD conforms to Dolby Digital EX.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the multi channel surround displays
1
2
3
4
5
6
7
SW
L
C
S
R
PRO LOGIC
DIGITAL MULTI CH IN 1 2 D.RANGE RDS MEMORY
COAX SLEEP MONO
a
SL
SR
L.F.E.
OPT
DTS
a
STEREO
EQ
SB
MPEG
qg
qf qd qs qa 09
8
1 SW: Lights up when sub woofer selection is
set to “YES” and the receiver detects that the
disc being played back does not contain the
LFE channel signal. While this indicator
lights up, the receiver creates a sub woofer
signal based on the low frequency
3 PRO LOGIC: Lights up when the receiver
applies Pro Logic processing to 2 channel
signals in order to output the center and
surround channel signals. However, this
indicator also lights when the Pro Logic II
movie/music decoder is in active. However,
this indicator does not light if the center and
surround speakers are set to “NO”, and
“A.F.D.” or “NORMAL SURROUND” is
selected.
components of the front channels.
2 Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters
vary to show how the receiver downmixes the
source sound (based on the speakers settings).
When using sound fields like “D.CONCERT
HALL”, the receiver adds reverberation based
on the source sound.
4 ; DIGITAL: Lights up when a sound field
other than “2CH” is selected and the receiver
is decoding signals recorded in the Dolby
Digital format.
5 MULTI CH IN 1/2: Lights up when MULTI
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SB (Surround Back (the
surround back components obtained by
6.1 matrix decoding))
CH IN 1 or 2 is selected.
6 D.RANGE: Lights up when dynamic range
compression is activated. See page 41 to
adjust the dynamic range compression.
7 Tuner indicators: Light up when using the
receiver to tune in radio stations, etc. See
pages 43–47 for tuner operations.
Example:
8 EQ: Lights up when the equalizer functions.
Recording format (Front/Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D.
9 SLEEP: Lights up when sleep timer is
activated.
0 ;: Lights up when Dolby Digital signals are
L
C
R
input.
SL
SR
continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the multi channel
surround displays (continued)
qa MPEG: Lights up when MPEG signals are
input.
Note
Only the front 2 channels are compatible with
MPEG format. Multi channel surround sound is
downmixed and output from the front 2 channels.
qs DTS: Lights up when DTS signals are input.
When playing a DTS format disc, be sure that
you have made digital connections and that
INPUT MODE is NOT set to ANALOG 2CH
FIXED (see page 27).
qd OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
qf COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
qg L.F.E.: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel. When the sound of the LFE
channel signal is actually being reproduced,
the bars underneath the letters lights up to
indicate the level. Since the LFE signal is not
recorded in all parts of the input signal the bar
indication will fluctuate (and may turn off)
during playback.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
Customizing sound fields
Parameter
Initial setting
2CH DECODING
2CH MODE
(depends on the sound field)
By adjusting the surround parameters and the
equalization of the front, center, surround, and
surround back speakers, you can customize the
sound fields to suit your particular listening
situation.
PRO LOGIC
3
C.WIDTH L__C__R*
DIMENSION F__I__S
*
Midpoint
PANORAMA MODE* OFF
Once you customize a sound field, the changes
are stored in the memory indefinitely. You can
change a customized sound field any time by
making new adjustments to the parameters.
EFFECT LEVEL
WALL S__I__H
REVERB S__I__L
FRONT REVERB
SCREEN DEPTH
VIR.SPEAKERS
SUR.ENHANCER
BASS GAIN
(depends on the sound field)
Midpoint
Midpoint
STD (STANDARD)
MID
See the tables starting from page 85 for the
parameters available in each sound field.
ON
ON
To get the most from multi
channel surround sound
0 dB
BASS FREQ.
250 Hz
0 dB
Position your speakers and do the procedures
described in “Multi channel surround setup”
starting from page 19 before you customize a
sound field.
TREBLE GAIN
TREBLE FREQ.
2.5 kHz
* You can set this parameter only when the 2ch
decode mode is set to “PL II MUSIC”.
Adjusting the surround
parameters
2ch decode type (2CH DECODING)
The SURROUND menu contains parameters
that let you customize various aspects of the
current sound field. The settings are stored
individually for each sound field.
Lets you specify the settings for decoding
Digital PCM, analog input, or the 2 channel
audio signals of [2/0] format sound.
•
•
•
When set to “AUTO”, the receiver performs the
decoding when the Dolby Surround or DTS
Surround encode flag is on.
1 Start playing a program source
encoded with multi channel surround
sound.
When set to “ON”, the receiver performs the
decoding for the 2 channel source, regardless of
the encode flag.
2 Press SURROUND.
The button lights up and the first parameter
is displayed.
When set to “OFF”, the receiver does not
perform the decoding.
3 Press the cursor buttons ( or ) to
select the parameter you want to
adjust.
Note
When “NORMAL SURROUND” is selected, the
receiver is automaticallty set to “ON” setting. When
“A.F.D.” is selected, the receiver automatically set to
“AUTO” setting. In either case, this parameter is not
displayed in the SURROUND menu.
4 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing sound fields (continued)
Center width control (C WIDTH)
You can set this parameter only when 2ch
decode mode is set to “PL II MUSIC”. You can
adjust the distribution of the center channel
signal, generated through the Dolby Surround
Pro Logic II decoding, to the L/R speakers.
2ch decode mode (2CH MODE)
Lets you specify the type of decoding for the 2
channel source. This receiver incorporates with
Dolby Surround Pro Logic II, and DTS Neo:6.
Each of these has movie mode and music
mode, and the receiver can reproduce the 2
channel sound in 5.1 channel through Dolby
Surround Pro Logic II, or 6 channel through
DTS Neo:6.
Dimension control (DIMENSION)
You can set this parameter only when 2ch
decode mode is set to “PL II MUSIC”. You can
adjust the difference between the front channels
and the surround channels.
•
When set to “PRO LOGIC”, the receiver
performs the Pro Logic decoding. The source
recorded in 2 channel is decoded into 4
channels.
Panorama mode (PANORAMA MODE)
You can set this parameter only when 2ch
decode mode is set to “PL II MUSIC”. You can
enjoy the surround sound by spreading the
sound field of front speakers to the left and
right of the listening position.
•
When set to “PL II MOVIE”, the receiver
performs the Pro Logic II movie mode
decoding. This setting is ideal for the movies
encoded in Dolby Surround. Besides, this mode
can reproduce the sound in 5.1 channel when
watching the videos of old movies or in the
dubbed language.
Effect level (EFFECT LEVEL)
Lets you adjust the “presence” of the current
surround effect.
•
You can set to “PL II MUSIC” only when
“NORMAL SURROUND” is selected. When
set to “PL II MUSIC”, the receiver performs the
Pro Logic II music mode decoding. This setting
is ideal for the normal stereo sources, such as
CDs. You can make further adjustments using
center width control, dimension control, and
panorama mode parameters.
Wall type (WALL)
Lets you control the level of the high
frequencies to alter the sonic character of your
listening environment by simulating a softer (S)
or harder (H) wall. The midpoint designates a
neutral wall (made of wood).
Reverberation (REVERB)
•
•
When set to “Neo: Cinema”, the receiver
performs the DTS Neo:6 movie mode decoding.
This setting is ideal for the movies encoded in
DTS Surround.
Lets you control the spacing of the early
reflections to simulate a sonically longer (L) or
shorter (S) room. The midpoint designates a
standard room with no adjustment.
You can set to “Neo: Music” only when
“NORMAL SURROUND” is selected. When
set to “Neo: Music”, the receiver performs the
DTS Neo:6 music mode decoding. This setting
is ideal for the normal stereo sources, such as
CDs.
Note
Dolby Surround Pro Logic II and DTS Neo:6 do not
function for DTS or MPEG format signals.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Front reverberation (FRONT
REVERB)
Bass adjustment (Gain/Frequency)
Unlike the equalizer in the equalizer menu
(which allows you to individually adjust the
overall sound quality of each set of speakers),
these parameters allow you to individually
adjust the tonal quality of each sound field.
This parameter can be used when
“D.CONCERT HALL A, B” is selected. This
parameter lets you adjust the amount of
reverberations to add to the front signals
according to the original reverberations in the
source.
1 Press the cursor buttons ( or
)
repeatedly to select the gain (dB) or
frequency (Hz).
•
•
To increase front reverberations, select “WET”.
To decrease front reverberations, select “DRY”.
2 Turn the jog dial to adjust.
Repeat until you achieve the sound you desire.
Screen depth (SCREEN DEPTH)
In a movie theater, sound seems to come from
inside the image reflected on the movie screen.
This parameter lets you create the same
sensation in your listening room by shifting the
sound of the front speakers “into” the screen.
“DEEP” provides the greatest amount of screen
depth.
Treble adjustment (Gain/Frequency)
Adjust as described in “Bass adjustment”.
Adjusting the level
parameters
The LEVEL menu contains parameters that let
you adjust the balance and volumes of each
speaker. The settings are applied to all sound
fields.
Virtual speakers (VIR. SPEAKERS)
Allows you turn the virtual speakers created by
“CINEMA STUDIO EX A, B, C” and “SEMI
C.STUDIO EX A, B, C” off or on.
1 Start playing a program source
encoded with multi channel surround
sound.
Surround reflection enhancer (SUR.
ENHANCER)
2 Press LEVEL.
This is a setup that adds the effect of a broader
sound obtained from the sound of the surround
channel even when the surround channel sound
is monaural. This setting operates in CINEMA
STUDIO EX A, B, C and SEMI C.STUDIO
EX A, B, C.
The button lights up and the first parameter
is displayed.
3 Press the cursor buttons ( or ) to
select the parameter you want to
adjust.
•
When ON is set, the effect is automatically
applied to sources recorded in Dolby Pro Logic,
Dolby Digital [2/1], [3/1] or dts [2/1], [3/1], etc.
surround channel.
4 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
•
When OFF is set, there is no effect added.
continued
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing sound fields (continued)
Front balance (FRONT)
Lets you adjust the balance between front left
and right speakers.
Initial settings
Surround balance (SURROUND)
Lets you adjust the balance between surround
left and right speakers.
Parameter
Initial setting
OFF
TEST TONE*
PHASE NOISE*
PHASE AUDIO*
FRONT L__I__R
SURROUND L__I__R
SUR.BACK L__I__R
CENTER LEVEL
SURROUND LEVEL
SUR.BACK LEVEL
S.WOOFER LEVEL
LFE MIX LEVEL
D.RANGE COMP.
OFF
Surround back balance (SUR.BACK)
OFF
Lets you adjust the balance between surround
back left and right speakers when surround
back L/R speakers are set to “YES”.
Center
Center
Center
0 dB
Center level (CENTER LEVEL)
Lets you adjust the level of the center speaker.
0 dB
0 dB
Surround level (SURROUND LEVEL)
Lets you adjust the level of the surround left
and right speakers.
0 dB
0 dB
OFF
Surround back level (SURR BACK
LEVEL)
Lets you adjust level of the surround back (left
and right) speaker(s).
* One of these parameters appears depending on the
test tone mode (T.TONE) parameter in the SET UP
menu (page 52).
Test tone (TEST TONE)
Sub woofer level (S. WOOFER LEVEL)
Lets you output the test tone from each speaker
in sequence. When set to “AUTO”, the test
tone is output from each speaker automatically.
When set to “FIX”, you can select the speaker
to output the test tone.
Lets you adjust the level of the sub woofer.
LFE (Low Frequency Effect) mix
level (LFE MIX)
Lets you attenuate the level of the LFE (Low
Frequency Effect) channel output from the sub
woofer without effecting the level of the bass
frequencies sent to the sub woofer from the
front, center or surround channels via the
Dolby Digital or DTS bass redirection
circuitry.
Test tone (PHASE NOISE)
Lets you output the test tone from two adjacent
speakers at a time in sequence.
Test tone (PHASE AUDIO)
Lets you output the source sound instead of the
test tone from two adjacent speakers at a time
in sequence.
•
For LFE mix level, “0 dB” outputs the full LFE
signal at the mix level determined by the
recording engineer.
•
To mute the sound of the LFE channel from the
sub woofer, select “OFF”. However, the low
frequency sounds of the front, center, or
surround speakers are output from the sub
woofer according to the settings made for each
speaker in the speaker setup (page 20–21).
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic range compressor (D.
RANGE COMP.)
Adjusting the equalizer
Lets you compress the dynamic range of the
sound track. This may be useful when you want
to watch movies at low volumes late at night.
We recommend using the “MAX” setting.
The EQ menu lets you adjust the equalization
of the front, center, surround and surround back
speakers individually. The equalizer bank lets
you store up to 5 different equalizer settings.
•
To reproduce the sound track with no
The following menu is only available after
pressing EQUALIZER and selecting one of the
equalizers (EQ PRESET [1]–[5]).
compression, select “OFF”.
•
To reproduce the sound track with the dynamic
range intended by the recording engineer, select
“STD”.
1 Start playing a program source
encoded with multi channel surround
sound.
•
•
To compress the dynamic range in small steps
to achieve the sound you desire, select “0.1”–
“0.9”.
2 Press EQUALIZER repeatedly to select
the equalizer you want to adjust (EQ
PRESET [1]–[5]).
To reproduce a dramatic compression of the
dynamic range, select “MAX”.
Notes
3 Press EQ.
• Dynamic range compression is possible with Dolby
Digital sources only.
• While NIGHT MODE is activated, D.RANGE
COMP. is automatically set to MAX and is not
displayed in the LEVEL menu.
The button lights up and the first parameter
is displayed.
4 Press the cursor buttons ( or ) to
select the parameter you want to
adjust.
Resetting customized sound
fields to the factory settings
5 Turn the jog dial to select the setting
you want.
The setting is entered automatically.
1 If the power is on, press ?/1 to turn off
the power.
MID
TREBLE
BASS
2 Hold down MODE + and press ?/1.
“S.F Initialize” appears in the display and
all sound fields are reset at once.
Bandwidth
Gain
(dB)
Frequency
(Hz)
Frequency Frequency
(Hz) (Hz)
Tip
You can turn off the equalization without erasing the
equalizer. Press EQUALIZER repeatedly to select
“EQ PRESET [OFF]”.
continued
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the equalizer (continued)
Surround speaker bass adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Front speaker bass adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Surround speaker treble adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
Front speaker midrange adjustment
(Gain/Frequency)
Surround back speaker bass
adjustment (Gain/Frequency)
Lets you adjust the gain and frequency of bass.
Lets you adjust the gain and frequency of
midrange.
Front speaker midrange bandwidth
Surround back speaker treble
adjustment (Gain/Frequency)
Lets you adjust the width of the midrange band.
•
“WIDE” provides a wide band centered on the
Lets you adjust the gain and frequency of
treble.
selected frequency, for general adjustments.
•
•
“MIDDLE” provides a normal band.
“NARROW” provides a narrow band centered
on the selected frequency, for specific
adjustments.
Clearing Stored Equalizer Settings
1 Press EQUALIZER repeatedly to select
the equalizer you want to clear (EQ
PRESET [1]–[5]).
Front speaker treble adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
2 Press EQ.
3 Press the cursor buttons (
or
) to
display “PRESET x CLEAR [NO]” (“x”
is the number of the current equalizer
preset).
Center speaker bass adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of bass.
4 Turn the jog dial to display “PRESET x
Center speaker midrange adjustment
(Gain/Frequency)
CLEAR [YES]” and press ENTER.
“Are you sure? [NO]” is displayed.
Lets you adjust the gain and frequency of
midrange.
5 Once again, turn the jog dial to display
“[YES]” and press ENTER.
“PRESET x CLEARED !” is displayed and
the contents of the selected equalizer bank
are restored to the factory presets.
Center speaker midrange bandwidth
Lets you adjust the width of the midrange band.
•
“WIDE” provides a wide band centered on the
selected frequency, for general adjustments.
•
•
“MIDDLE” provides a normal band.
“NARROW” provides a narrow band centered
on the selected frequency, for specific
adjustments.
Center speaker treble adjustment
(Gain/Frequency)
Lets you adjust the gain and frequency of
treble.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Broadcasts
Notes
Before receiving broadcasts, make sure you
have connected FM and AM antennas to the
receiver (see page 7).
• Do not press any button on the receiver or supplied
remote during autobetical operation.
• If you move to another area, repeat this procedure
to store stations in your new area.
• For details on tuning the stored stations, see page
45.
Storing FM stations
automatically
(AUTOBETICAL)
• The FM MODE setting is also stored along with the
station.
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
(Models of area code CEL only)
This function lets you store up to 30 FM and
FM RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
Direct tuning
You can enter a frequency of the station you
want directly by using the numeric buttons on
the supplied remote.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” on page 45.
1 Rotate FUNCTION to select TUNER.
1 Press ?/1 to turn off the receiver.
The last received station is tuned in.
2 Hold down MEMORY and press ?/1 to
2 Press FM/AM to select the FM or AM
turn the receiver back on.
band.
“Autobetical select” appears in the display
and the receiver scans and stores all the FM
and FM RDS stations in the broadcast area.
3 Select TUNER from the FUNCTION list,
then select “DIRECT TUNING” from the
SUB menu (page 62).
For RDS stations, the tuner first checks for
stations broadcasting the same program,
then stores only the one with the clearest
signal. The selected RDS stations are sorted
alphabetically by their Program Service
name, then assigned a 2-character preset
code. For more details on RDS, see page 46.
4 Press the numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
b
b
b
b
1
0
2
5
0
Example 2: AM 1350 kHz
(You don’t have to enter the last “0” when the
tuning scale is set to 10 kHz.)
Regular FM stations are assigned
2-character preset codes and stored after the
RDS station.
b
b
b
1
3
5
0
When done, “Autobetical finish” appears in
the display momentarily and the receiver
returns to the normal operation.
If you cannot tune in a station and the
entered numbers flash
Make sure you’ve entered the right
frequency. If not, repeat steps 3 and 4.
If the entered numbers still flash, the
frequency is not used in your area.
continued
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct tuning (continued)
Automatic tuning
5 If you’ve tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you don’t know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
6 Repeat steps 2 to 5 to receive another
1 Rotate FUNCTION to select TUNER.
station.
The last received station is tuned in.
Tips
2 Press FM/AM to select the FM or AM
• If you do not remember the precise frequency, press
TUNING + or TUNING – after entering the value
close to the frequency you want. The receiver
automatically tunes in the station you want. If the
frequency seems to be higher than the entered
value, press TUNING +, and if the frequency seems
to be lower than the entered value, press
TUNING –.
• If “STEREO” flashes in the display and the FM
stereo reception is poor, press FM MODE to
improve the sound. You will not be able to enjoy
the stereo effect, but the sound will be less
distorted.
band.
3 Press TUNING + or TUNING –.
Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end of
the band
Scanning is repeated in the same direction.
Note
4 To continue scanning, press TUNING +
If “STEREO” does not appear at all when an FM
broadcast is received normally, press FM MODE to
turn on the “STEREO” indication.
or TUNING – again.
Preset tuning
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 2.
After you have tuned in stations using Direct
Tuning or Automatic Tuning, you can preset
them to the receiver. Then you can tune in any
of the stations directly by entering its
2-character preset code using the supplied
remote. Up to 30 FM or AM stations can be
preset. The receiver will also scan all the
stations that you have preset.
Area code
CN, CEL
E
FM
AM
50 kHz
50 kHz
9 kHz
9 kHz*
* The AM tuning scale can be changed (see page 81).
Before tuning to preset stations, be sure to
preset them by performing steps on “Presetting
radio stations” (page 45).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting radio stations
Tuning to preset stations
You can tune the preset stations by either of the
following two ways.
1 Rotate FUNCTION to select TUNER.
The last received station is tuned in.
Scanning the preset stations
2 Tune in the station that you want to
preset using Direct Tuning (page 43) or
Automatic Tuning (page 44).
1 Rotate FUNCTION to select TUNER.
The last received station is tuned in.
3 Press MEMORY.
2 Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
“MEMORY” appears in the display for a
few seconds.
Do steps 4 to 5 before “MEMORY” goes
out.
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
4 Press PRESET TUNING + or PRESET
TUNING – to select a preset number.
nA1˜A2˜...˜A0˜B1˜B2˜...˜B0N
If “MEMORY” goes out before you press
the preset number, start again from step 3.
nC0˜...C2˜C1N
5 Press MEMORY again to store the
station.
Using the preset codes
If “MEMORY” goes out before you can
store the station, start again from step 3.
Use the supplied remote to perform the
following operations. For details on the buttons
used in this section, see page 65.
6 Repeat steps 2 to 5 to preset another
station.
1 Rotate FUNCTION to select TUNER.
The last received station is tuned in.
2 Select the preset station you want from
the list displayed on the supplied
remote.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Using the Radio Data
System (RDS)
• If there is an emergency announcement by
government authorities, “Alarm-Alarm!” flashes in
the display.
• If a station does not provide a particular RDS
service, “No XX” (such as “No Clock Time”)
appears in the display.
• When a station broadcasts radio text data, it is
displayed at the same rate at which it is sent from
the station. Any change in this rate is reflected in
the display rate of the data.
(Models of area code CEL only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can use
the following convenient RDS features:
Scanning preset stations by
program type
– Displaying RDS information
– Scanning preset stations by program type
Note that RDS is operable only for FM
stations.*
You can tune in preset stations according to a
program type that you specify. The receiver
scans for stations in its preset memory
currently broadcasting the specified program
type.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
1 Press RDS PTY.
Receiving RDS broadcasts
2 Press PTY SELECT + or PTY SELECT –
to select the program type.
Simply select a station on the FM band
using direct tuning (page 43), automatic
tuning (page 44), or preset tuning (page
44).
See the table below for the information on
each program type.
3 Press RDS PTY.
When you tune in a station that provides RDS
services, the RDS indicator lights up and the
program station name appears in the display.
While the receiver is scanning stations,
“PTY SEARCH” appears in the display
window.
When the receiver finds a station, the
receiver stops scanning. When the receiver
could not find any preset stations currently
broadcasting the specified program type,
“PTY not found” appears in the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if the
signal strength is weak.
Displaying RDS information
While receiving an RDS station, press
DISPLAY.
PS (Program Station name)a) appears.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
Frequencya) t PTY (Program TYpe)
indicationb) t RT (Radio Text) indicationc) t
CT (Current Time) indication (in 24-hour
system)
a) This information also appears for non-RDS FM
stations.
b) Type of program being broadcast (see page 47).
c) Text messages sent by the RDS station.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of program types
Program type
indication
Description
Program type
indication
Description
Leisure & Hobby Programs on recreational activities
such as gardening, fishing,
News
News programs
cooking, etc.
Current Affairs Topical programs that expand
on current news
Jazz Music
Jazz programs
Country Music
Country music programs
Information
Programs offering information on
a wide spectrum of subjects,
including consumer affairs and
medical advice
National Music Programs featuring the popular
music of the country or region
Oldies Music
Folk Music
Documentary
None
Programs featuring oldies music
Folk music programs
Sport
Sports programs
Investigative features
Education
Educational programs, such as
“how-to” and advice programs
Any programs not defined above
Drama
Radio plays and serials
Cultures
Programs about national or
regional culture, such as language
and social concerns
Science
Programs about the natural
sciences and technology
Varied Speech
Other types of programs such as
celebrity interviews, panel games,
and comedy
Pop Music
Popular music programs
Rock music programs
Rock Music
M.o.R Music
Middle of the Road Music
Light Classics M Instrumental, vocal, and choral
music
Serious Classics Performances of major orchestras,
chamber music, opera, etc.
Other Music
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
Weather & Metr Weather information
Finance Stock market reports and trading,
etc.
Children’s Progs Programs for children
Social Affairs
Programs about people and the
things that affect them
Religion
Phone In
Programs of religious content
Programs where members of the
public express their views by
phone or in a public forum
Travel & Touring Programs about travel. Not for
announcements that are located by
TP/TA.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
3 Create an index name by using the jog
dial and cursor buttons:
Naming preset stations
and program sources
Turn the jog dial to select a character, then
press to move the cursor to the next
position.
You can enter a name of up to 8 characters for
preset stations and program sources. These
names (for example, “VHS”) appear in the
receiver’s display when a station or program
source is selected. Note that no more than one
name can be entered for each preset station or
program source.
This function is useful for distinguishing
components of the same kind. For example,
two VCRs can be specified as “VHS” and
“8mm”, respectively. It is also handy for
identifying components connected to jacks
meant for another type of component, for
example, a second CD player connected to the
MD/DAT jacks.
To insert a space
Turn the jog dial until a blank space appears
in the display .
If you’ve made a mistake
Press or repeatedly until the character
to be changed flashes, then turn the jog dial
to select the right character.
4 Press ENTER.
5 Repeat steps 2 to 4 to assign index
name for another station or program
source.
Note
(Models of area code CEL only)
You cannot change the name of an RDS station.
Besides, you can change the names of the
sound fields up to 18 characters.
Recording
1 To index a preset station
Rotate FUNCTION to select TUNER,
then tune in the preset station you want
to create an index name for.
Before you begin, make sure you’ve connected
all components properly.
The last station you received is tuned in.
If you are not familiar with how to tune in
preset stations, see “Tuning to preset
stations” on page 45.
Recording on an audio tape
or MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating
instructions of your cassette deck or MD deck
if you need help.
To index a program source
Select the program source (component)
to be named.
To change the name of the sound
field
Select the sound field you want to
1 Select the component to be recorded.
2 Prepare the component for playing.
For example, insert a CD into the CD
player.
change the name.
2 Press NAME once to index preset
stations and program sources, press
NAME twice to change the name of the
sound field.
3 Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4 Start recording on the recording deck,
then start playback on the playback
component.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Tip
• You cannot record a digital audio signal using a
component connected to the analog TAPE OUT or
MD/DAT OUT jacks. To record a digital audio
signal, connect a digital component to the
DIGITAL MD/DAT OUT jacks.
• Sound adjustments do not affect the signal output
from the TAPE OUT or MD/DAT OUT jacks.
• The analog audio signals of the current function is
output from the REC OUT jacks. When you use
AUDIO SPLIT to assign a digital audio input (for
example, MD/DAT OPTICAL), the analog audio
signals of the assigned audio (for example, MD/
DAT ANALOG) is output.
• The signals input to the MULTI CH IN jacks are
not output from the REC OUT jacks even when
MULTI/2CH ANALOG DIRECT is set to MULTI
CH 1 or 2 DIRECT. The analog audio signals of the
current function are output.
• No signals are output from DIGITAL OUT jacks
(MD/DAT OPTICAL OUT) when you set MULTI/
2CH ANALOG DIRECT to 2CH ANALOG
DIRECT. The digital circuitry power is cut off to
ensure a superior sound quality.
You can record the sound from any audio source onto
a video tape while copying from a video tape or laser
disc. Locate the point where you want to start
recording from another audio source, select the
program source, then start playback. The audio from
that source will be recorded onto the audio track of
the video tape instead of the audio from the original
medium. To resume audio recording from the original
medium, select the video source again.
Notes
• Make sure to make both digital and analog
connections to the TV/SAT and DVD/LD inputs.
Analog recording is not possible if you make only
digital connections.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources.
• The analog audio signals of the current function is
output from the REC OUT jacks. When you use
AUDIO SPLIT to assign a digital audio input (for
example, MD/DAT OPTICAL), the analog audio
signals of the assigned audio (for example, MD/
DAT ANALOG) is output.
• The signals input to the MULTI CH IN jacks are
not output from the REC OUT jacks even when
MULTI/2CH ANALOG DIRECT is set to MULTI
CH 1 or 2 DIRECT. The analog audio signals of the
current function are output.
Recording on a video tape
You can record from a VCR, a TV, or an LD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or LD player if you
need help.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
1 Select the program source to be
recorded.
Press SLEEP while the power is on.
Each time you press the button, the display
changes cyclically as follows:
2 Prepare the component for playing.
For example, insert the laser disc you want
to record into the LD player.
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
3 Insert a blank video tape into the VCR
(VIDEO 1 or VIDEO 2) for recording.
While using Sleep Timer, “SLEEP” lights up in
the display.
4 Start recording on the recording VCR,
then start playing the video tape or
laser disc you want to record.
Tips
• You can freely specify the time. After pressing
SLEEP, specify the time you want using the jog dial
and cursor buttons ( or ) on the receiver. The
sleep time changes in 1 second intervals. You can
specify up to 5 hours.
• To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
in the display.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
x 6.1ch decoding mode (6.1CH
Adjustments using the
SET UP button
DECODING)
You can set this parameter using 6.1CH
DECODING on the front panel (page 33).
•
When set to “AUTO”, the receiver performs
6.1 channel decoding only if 6.1 channel signals
decode flag is ON.
The SET UP button allows you to make the
following adjustments.
1 Press SET UP.
•
When set to “ON”, the receiver performs
6.1 channel decoding only if the surround
signals are multi channel format [3/2], [3/2+1]
or [3/3] regardless of the 6.1 channel decode
flag.
2 Press the cursor buttons ( or ) to
select the parameter you want to
adjust.
3 Turn the jog dial to select the setting
•
When set to “OFF”, the receiver does not
perform 6.1 channel decoding.
you want.
The setting is entered automatically.
Tip
4 Repeat steps 2 and 3 until you have set
The 6.1 channel decoding flag is the information
recorded on the software (DVD, etc).
all of the parameters that follow.
Initial settings
x Multi channel assignment
(MULTI CH 1 or 2)
Parameter
Initial setting
AUTO
NONE
AUTO OFF
AUTO OFF
ON
Lets you assign a function to MULTI CH 1 or
2. You cannot assign TUNER or PHONO.
6.1CH DECODING
MULTI CH 1 or 2
D.POWER
You cannot assign the same function to both
MULTI CH 1 and 2.
V.POWER
S.FIELD LINK
DECODE FORMAT
AUTO FUNCTION
2 WAY REMOTE
COMMAND MODE
T.TONE
AUTO
ON
ON
AV1
NORMAL
PAL
COLOR SYSTEM
OSD
COLOR
4
OSD H.POSITION
OSD V.POSITION
4
50
Download from Www.Somanuals.com. All Manuals Search And Download.
x Digital power management (D.POWER)
Lets you enjoy the analog source without the
influence of digital circuits.
x Digital input decode mode (DECODE
FORMAT)
Lets you specify the decode type for the signal
input to the digital audio jacks.
•
“AUTO OFF” turns off the power of the
unnecessary digital circuits automatically when
you use analog inputs or functions that bypass
digital processing when MULTI/2CH
•
“AUTO” switches between DTS, Dolby
Digital, or PCM decoding automatically.
•
“PCM” decodes all the input signals as PCM
signals. If a Dolby Digital, DTS, or MPEG
(etc.) signal is input, no sound will be heard.
When set to “AUTO”, and the sound from the
digital audio jacks (for CD, etc.) is interrupted
when playback starts, set to “PCM”.
ANALOG DIRECT function is used.
•
“ALWAYS ON” keeps the power of digital
circuits on. Select if you do not like the time lag
that occurs with the “AUTO OFF” setting when
digital circuits are turned on, etc.
x Video power management (V.POWER)
Lets you enjoy the sound without the influence
of the video circuits.
x CONTROL A1 auto function (AUTO
FUNCTION)
Lets you switch the function of this receiver to
the Sony components connected via CONTROL
A1 cords (see page 13) automatically when the
connected component is set to play mode.
•
“AUTO OFF” turns off the power of video
circuits automatically when it is unnecessary.
•
“ALWAYS ON” keeps the power of video
circuits on. Depending on the monitor, noise
may be produced or the picture may be
continued
distorted when the power of the video circuits is
turned on. In this case, select “ALWAYS ON”.
x Sound field link (S.FIELD LINK)
Lets you apply the last selected sound field to a
program source whenever it is selected. For
example, if you listen to CD with STADIUM
as the sound field, change to a different
program source, then return to CD, STADIUM
will be applied again.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
x Selecting the command mode of the
Adjustments using the SET UP button
(continued)
remote (COMMAND MODE)
Lets you select the command mode of the
remote. Change the command mode when you
use 2 Sony receivers in the same room.
x 2-way remote (2 WAY REMOTE)
This receiver is shipped from the factory with
the 2 way remote control system set to “ON”.
Normally, you can use the receiver as is.
However, if you want to use this receiver
together with another component that is also
compatible with the 2 way remote control
system, be sure to perform the following
operation to limit response to signals sent from
the remote controls.
x Test tone mode (T.TONE)
Lets you select the test tone output mode
(page 25).
•
•
•
“NORMAL” output the test tone from each
speaker in sequence.
“PHASE NOISE” output the test tone from two
adjacent speakers at a time in sequence.
“PHASE AUDIO” output the source sound
instead of the test tone from two adjacent
speakers at a time in sequence.
First select one component for the 2 way
remote control, then set the 2 way remote
control system for the component to “ON”. For
other components, set the 2 way remote control
system to “OFF”. With these settings, the
component for which the 2 way remote control
system is set to “OFF” cannot be used.
Therefore, connect the CONTROL A1 jacks
of both components with monaural (2P) mini-
plug cord.
x Monitor color system (COLOR
SYSTEM)
Lets you select the color system of your TV
monitor.
x Color of the on-screen display (OSD)
Lets you select the color of the on-screen
display.
x OSD horizontal position (OSD
H.POSITION)
Lets you adjust the position of the on-screen
display horizontally.
x OSD vertical position (OSD
V.POSITION)
Lets you adjust the position of the on-screen
display vertically.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL A1 and CONTROL A1
compatibility
CONTROL A1 control
system
The CONTROL A1 control system has been
updated to the CONTROL A1 which is the
standard system in the Sony 300 disc CD changer
and other recent Sony components. Components
with CONTROL A1 jacks are compatible with
components with CONTROL A1 , and can be
connected to each other. Basically, the majority of
the functions available with the CONTROL A1
control system will be available with the
Getting Started
This section explains the basic functions
of the CONTROL A1 Control System.
Certain components have special
CONTROL A1 control system.
functions, like “CD Synchro Dubbing” on
cassette decks, that require CONTROL
A1 connections. For detailed information
regarding specific operations, be sure to
also refer to the Operating Instructions
supplied with your component(s).
However, when making connections between
components with CONTROL A1 jacks and
components with CONTROL A1 jacks, the
number of functions that can be controlled may be
limited depending on the component. For detailed
information, refer to the operating instructions
supplied with the component(s).
The CONTROL A1 Control System was
designed to simplify the operation of audio
systems composed of separate Sony
components. CONTROL A1 connections
provide a path for the transmission of control
signals which enable automatic operation and
control features usually associated with
integrated systems.
Connections
Connect monaural (2P) mini-plug cords in
series to the CONTROL A1 jacks on the
back of each component. You can connect up
to 10 CONTROL A1 compatible components
in any order. However, you can connect only
one of each type of component (i.e., 1 CD
player, 1 MD deck, 1 tape deck and 1 receiver).
Currently, CONTROL A1 connections
between a Sony CD player, amplifier
(receiver), MD deck and cassette deck provide
automatic function selection and synchronized
recording.
(You may be able to connect more than one CD
player or MD deck, depending on the model.
Refer to the operating instructions supplied
with the respective component for details.)
In the future, the CONTROL A1 connection
will work as a multifunction bus allowing you
to control various functions for each
component.
Example
Notes
Amplifier
(Receiver) player deck
CD
MD
Tape
deck
Other
component
• The CONTROL A1 Control System is designed to
maintain upward compatibility as the Control
System is upgraded to handle new functions. In this
case, however, older components will not be
compatible with the new functions.
• Do not operate a 2 way remote control unit when
the CONTROL A1 jacks are connected via a PC
interface kit to a personal computer running “MD
Editor” or similar application. Also, do not operate
the connected component in a manner contrary to
the functions of the application, as this may cause
the application to operate incorrectly.
In the CONTROL A1 control system, the
control signals flow both ways, so there is no
distinction of IN and OUT jacks. If a
component has more than one CONTROL
A1 jack, you can use either one, or connect
different components to each jack.
continued
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
CONTROL A1 control system
(continued)
• You must connect a CONTROL A1 compatible
amplifier (receiver) using a monaural mini-plug
cord in order to take advantage of the automatic
function selection feature.
Jacks and connection examples
CONTROL A1
• This function only works when the components are
connected to the amplifier (or receiver) inputs
according to the names on the function buttons.
Certain receivers allow you to switch the names of
the function buttons. In this case, refer to the
operating instructions supplied with the receiver.
• When recording, do not play any components other
than the recording source. It will cause the
automatic function selection to operate.
CONTROL A1
CD player
Synchronized recording
MD deck
This function lets you conduct synchronized
recording between the selected source and
recorder components.
On CONTROL A1 jacks and
connections
It is possible to make connections between
CONTROL A1 and CONTROL A1 jacks.
For details regarding particular connections or
set up options, refer to the operating
1 Set the function selector on the
amplifier (or receiver) to the source
component.
2 Set the source component to pause
mode (make sure both the N and X
indicators light together).
instructions supplied with the component(s).
3 Set the recorder component to the
About the connecting cord
REC-PAUSE mode.
Some CONTROL A1 compatible components
are supplied with a connecting cord as an
accessory. In this case, use the connecting cord
for your connection.
4 Press PAUSE on the recorder
component.
The source component is released from
the pause mode, and recording begins
shortly thereafter.
When playback ends from the source
component, recording stops.
When using a commercially available cord, use
a monaural (2P) mini-plug cord less than
2 meters long, with no resistance (like the Sony
RK-G69HG).
Notes
• Do not set more than one component to the pause
mode.
Basic Functions
• Certain recorder components may be equipped with
a special synchronized recording function that uses
the CONTROL A1 Control System, like “CD
Synchro Dubbing”. In this case, refer to the
operating instructions supplied with the recorder
component.
The CONTROL A1 functions will operate as
long as the component you want to operate is
turned on, even if all of the other connected
components are not turned on.
Automatic function selection
When you connect a CONTROL A1
compatible Sony amplifier (or receiver) to
other Sony components using monaural mini-
plug cords, the function selector on the
amplifier (or receiver) automatically switches
to the correct input when you press the play
button on one of the connected components.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations using the remote
Understanding the 2 way
remote system
Before you use your
remote
This remote operates under a 2 way remote
system. With the two way remote system, the
component responds to signals sent from the
remote by sending additional signals
(information about the status of the component,
text data, etc.) back to the remote. Thus,
operations are performed as a result of
communication between the remote and the
component.
Inserting batteries into the
remote
Insert three LR6 (size-AA) alkaline batteries
with the + and – properly oriented in the
battery compartment. When using the remote,
point it at the remote sensor
receiver.
on the
Component
Remote
}
]
]
}
}
]
When using a home entertainment system
comprised of several components compatible
with the 2 way remote system, please restrict 2
way remote system operation to a single
component. Normally, turn off the 2 way
remote system on all components except the
receiver.
Tip
Under normal conditions, the batteries should last for
about 3 months. When the remote no longer operates
the receiver, replace all the batteries with new ones.
If you would like to turn off the receiver’s
2 way remote system, set “2-way remote” using
the SET UP button (page 52).
Notes
• Do not leave the remote in an extremely hot or
humid place.
The COMMAND MODE
• Do not use a new battery with old ones.
• Do not mix the alkaline batteries and other kinds of
batteries. This remote is designed for use with the
alkaline batteries only.
• Do not expose the remote sensor of the receiver to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
If the receiver’s COMMAND MODE and the
remote’s COMMAND MODE do not match,
transmission is not possible between the remote
and the receiver. If you have not changed the
COMMAND MODE of the remote and the
receiver after purchase, it is not necessary to set
the COMMAND MODE. For details, see page
75.
continued
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you use your remote
(continued)
Location of parts and
basic remote operations
Setting up the remote
At the time of shipping, the remote has not
been customized to your receiver yet. Before
you use the remote for the first time, do the
procedure below to set up the remote so that
it can control your receiver properly.
1
1 Press ?/1 on the receiver to turn it
on.
AV ?/1
?/1
SYSTEM
STANDBY
2
2 Point the remote towards the receiver
and press SOUND FIELD, FUNCTION,
or SUB.
wj
wh
FUNCTION
SET UP
SOUND FIELD
3
4
and
appear in the display window of
PUSH ENTER
5
the remote while it communicates with the
receiver and identifies the receiver model.
ws
SUB
h
H
When the communication ends, the remote is
customized and provides the operation lists
that match your receiver.
X
x
6
.
>
m
M
CH/PRESET/D.SKIP
–
+
MASTER
VOL
7
8
6.1CH
DECODING
+
wg
wf
MUTING
–
Open up the cover.
v
AV MENU
SUB
ON SCREEN
wd
ws
9
0
NIGHT
DIMMER
+
MODE
+
1
4
2
3
6
9
qa
qd
qg
qj
AUDIO INPUT
SPLIT MODE
qs
qf
qh
–
–
5
8
0
wa
TEST
TONE EQ/TONE
7
MAIN
SHIFT
ENTER MENU SLEEP
EXIT/RETURN
>
10
w;
ql
ENTER/
EXECUTE
qk
56
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Tape/disc operation buttons
The following table shows what
components are operated by each button and
the function of the buttons.
Parts Description
1 Display window
The current status of the selected
component or a list of selectable items
appears here.
Button(s) Function
H
h
Starts play of the playback medium.
Note
Starts play on the reverse side of the
cassette.
Characters other than letters of the alphabet or
numbers may be displayed incorrectly on the
remote, even if they appear correctly in the
display window on the main unit.
X
Pauses play or recording or starts
recording when the component is in
recording standby.
2 ?/1 switch
x
Stops play.
Press to turn the receiver on or off.
./> Skips tracks.
m/M Fastwinds or rewinds.
3 SET UP button
Searches tracks in the forward or
backward direction.
Press to display the set up list. Press again
to revert back to the component
information.
See the table on page 60 for information on
the buttons that you can use to control each
component.
4 FUNCTION button
Press to display the function (component)
list. Press again to revert back to the
component information.
7 CH/PRESET/D.SKIP +/– buttons
Press repeatedly to select a preset station,
channel, track, or a disc.
See the table on page 60 for information on
the buttons you can use to control each
component.
8 MASTER VOL +/– buttons
Press to adjust the volume level of all
speakers at the same time.
If you want to change the contents of the
function list to match your particular
components, do the procedure
9 ON SCREEN button
“Programming the remote” on page 66.
The function of this button is same as the
ON SCREEN button on the receiver. See
page 9.
5 Easy scroll key
While displaying a list, move up or down to
select an item from the list, and then press
to enter the selection.
0 NIGHT MODE button
The function of this button is same as the
NIGHT MODE button on the receiver. See
page 33.
continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
qk Cursor buttons (V/v/B/b)
Location of parts and basic remote
operations (continued)
After pressing MAIN MENU, use the
cursor buttons to make specific settings.
qa DIMMER button
To perform menu operations on the VCR,
DVD player, or SAT tuner, do the
procedure below. If you do not do this, the
cursor buttons merely operate the receiver.
The function of this button is same as the
DIMMER button on the receiver. See page
29.
qs AUDIO SPLIT button
1 Press FUNCTION and move the easy
scroll key to select the VCR, DVD
player, or SAT tuner.
The function of this button is same as the
AUDIO SPLIT button on the receiver. See
page 26.
2 Open up the cover on the remote.
CURSOR TYPE list appears.
qd INPUT MODE button
If the list has disappeared before you go
on to step 3, press any of the cursor
buttons to restore the list.
3 Move the easy scroll key to select the
component that you selected in step 1,
then press the key to enter the selection.
The function of this button is same as the
INPUT MODE button on the receiver. See
page 27.
qf TEST TONE button
Press to output a test tone.
qg EQ/TONE button
ENTER/EXECUTE button
The function of this button is same as the
EQUALIZER button on the receiver. See
page 41.
After pressing AV MENU, use the cursor
buttons to select a menu item, press
ENTER/EXECUTE to enter the selection.
qh MAIN MENU button
Press repeatedly to select a menu,
SURROUND etc.
EXIT/RETURN button
Press to return to the previous menu or exit
the menu while VCR, DVD, or SAT menu
is displayed on the TV screen.
qj SLEEP button
Press repeatedly to activate the sleep
function and select the duration after which
the receiver turns off automatically.
ql ENTER button
After selecting a channel, disc, or track
using the numeric buttons, press this button
to enter the selection. For details, refer to
the operation manual supplied with the
respective components.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
w; SHIFT >10 button
wf MUTING button
If you have selected tuner:
The function of this button is same as the
MUTING button on the receiver. See page
27.
Press repeatedly to select a memory page
for presetting radio stations or tuning to
preset stations.
wg 6.1CH DECODING button
The function of this button is same as the
6.1CH DECODING button on the receiver.
See page 33.
If you selected VCR, TV, tape deck, LD
player, video CD player, MD deck, or CD
player:
Press before inputting a channel, disc, or
track number of eleven or higher. For
details, refer to the operation manual
supplied with the respective components.
wh SOUND FIELD button
Press to display the sound field list. Press
again to revert back to the component
information.
wa Numeric buttons (1 to 0)
wj AV ?/1 switch
Inputs the correponding numeric value. On
some components, pressing 0 selects 10. For
details, refer to the operation manual
supplied with the respective components.
Press to turn on or off the components that
the remote is programmed to operate. For
details on programming procedure, see
“Programming the remote” on page 66.
ws SUB button
If you press the ?/1 switch (2) at the
same time, it will turn off the main
component and other Sony audio/video
components (SYSTEM STANDBY).
While operating a component, press to
display a list of operations that the
corresponding buttons are not found on the
remote. Then move the easy scroll key to
select the operation, and then press the key
to enter the selection. Press again to revert
back to the component information.
See the table on pages 61–62 for
information on the operations that appear
when you press SUB.
Note
The function of the AV ?/1 switch changes
automatically each time you press FUNCTION
(4). Depending on the component, the above
operation may not be possible or may operate
differently than described.
continued
wd AV MENU button
When you have selected the VCR, DVD
player, or SAT tuner, press this button to
display VCR, DVD, or SAT menu on the
TV screen. Then use the cursor buttons to
perform the menu operations (see “qk
Cursor buttons (V/v/B/b)”, “ENTER/
EXECUTE button”, and “EXIT/RETURN
button”).
Note
When you have selected VCR, the remote is set to
control the VCR that corresponds with VCR 1
after you press AV MENU. Before pressing the
button, make sure to set the VCR input mode to
VCR 1.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of parts and basic remote
operations (continued)
Table of buttons used to control each component
When you program the remote to control the following Sony or non-Sony components, you can use
the buttons on the remote that are marked with circles. Note, however, that some buttons may not
operate your component.
Component
VCR TV
LD DVD Video CD CD MD Tape DAT Tuner Cable Satellite Projector
player player player player deck deck deck
(A and B)
box tuner
Button
AV ?/1
SUB1)
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
h
H
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
X
z
x
z
./>
m/M
CH
z2)
z
z
z
z
z
PRESET
D.SKIP +/–3)
Cursor buttons
AV MENU
Numeric buttons
SHIFT
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
>10
z
z
z
z
z
z
z
z
z
ENTER
EXIT
z
z4)
z
z
z
z
RETURN
ENTER/EXECUTE
z
z
z
z
z
z
1) For information on the operations that become available when you press the button, see the table on pages 61–
62.
2) Deck B only.
3) Multi disc changer only.
4) RMS/START.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of operations that
appear when you press the
SUB button
Component Item(s)
Function
LD Player DISPLAY
Selects information
displayed on the TV
screen.
SIDE Aa)
SIDE Ba)
Selects side A of the disc.
Selects side B of the disc.
Press SUB to display a list of operations that
the corresponding buttons are not found on the
remote. The contents of the lists will vary
according to the currently selected component.
The following table shows the items in each list
and the function of each item.
PROGRAM Programs the tracks.
REPEAT
Repeats current track or
programmed tracks.
DVD player DISPLAY
Selects information
displayed on the TV
screen.
Component Item(s)
VCR DISPLAY
Function
Selects information
displayed on the TV
screen.
TITLE
Displays the Title menu.
For details on the menu
operation, see the tip on
page 63.
INPUT
SELECT
Changes the input mode
of the VCR.
SET UP
Displays the Set up
menu. For details on the
menu operation, see the
tip on page 63.
ANT TV/VTR Selects the signal to be
output from the antenna
terminal of the VCR (TV
signal or video signal).
SUBTITLE Changes the Subtitle
CHG. Language.
SUBTITLE Displays the Subtitles.
SP/LP
Selects the playback
speed.
REC
Starts recording.
Mutes the sound.
Raises the volume.
Lowers the volume.
AUDIO
Changes the sounds.
TV
MUTING
VOL +
VOL –
-/--
CHANGE
SEARCH
MODE
Changes the search mode.
Selects the channel of
eleven or higher.
CLEAR
Returns to the
Continuous Play etc.
JUMP
Toggles between the
previous and current
channels.
INDEX +
Selects a index.
INDEX –
DISPLAY
Selects information
displayed on the TV
screen.
continued
TV/VIDEO Changes the input mode
of the TV.
P IN P
Activates the picture-in
picture function.b)
POSITION Changes the position of
the small picture.b)
SWAP
Swaps the small and
large pictures.b)
WIDE
Selects the wide-picture
mode.c)
SUB CH +
Selects preset channels
for the small picture.b)
SUB CH –
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of parts and basic remote
operations (continued)
Component Item(s)
Satellite tuner GUIDE
JUMP
Function
Displays the SAT guide.
Toggles between the
previous and current
channels.
Component Item(s)
Function
VIDEO CD TIME
player
Changes the time
information.
DISPLAY
Selects information
displayed on the TV
screen.
INDEX +
INDEX –
Selects a index.
Selects a disc.d)
Selects a track.d)
FAVORITE Displays the Favorite
Station Guides.
CD Player DISC
TRACK
CATEGORY Displays the Guide
Category list.
CONTINUE Selects Continuous Play.
SHUFFLE Selects Shuffle Play.
PROGRAM Selects Program Play.
INDEX
Displays the Station
Index.
REPEAT
Selects Repeat Play.
-/--
Selects the channel of
eleven or higher.
MD deck
DISPLAY
Changes the information
on the display.
EPG
Displays the EPG
(Electronic Program
Guide).
CONTINUE Selects Continuous Play.
SHUFFLE Selects Shuffle Play.
PROGRAM Selects Program Play.
REPEAT Selects Repeat Play.
MENU(EDIT)/ Selects editing operation
Projector
POWER ON Turn on the projector.
POWER OFF Turn off the projector.
INPUT A
Switch to the input from
INPUT A jacks.
NO
or cancels editing.
INPUT B
Switch to the input from
INPUT B jacks.
YES
Performs editing
operation.
INPUT
VIDEO
Switch to the input from
VIDEO jacks.
CLEAR
Erases a track in the
program etc.
INPUT
SELECT
Switch to the input from
VIDEO IN or S VIDEO
IN jacks.
REC
Pauses for recording.
Tape deck A-REC
B-REC
Makes deck A pause for
recording.
MEMORY
Store the adjusted data in
memory.
Makes deck B pause for
recording.
BRIGHT +
BRIGHT –
CONTRAST
CONTRAST
ZOOM +
ZOOM –
Adjust the brightness.
Adjust the contrast.
DAT deck REC
REPEAT
Pauses for recording.
Starts Repeat Play.
+
CLEAR
Erases a track in the
program etc.
–
Adjust the zoom of the
picture.
Tuner
DIRECT
TUNING
Enters Direct Tuning
mode.
SHIFT +
FM/AM
Selects the FM or AM
band.
Adjust the lens shift of
the picture.
SHIFT –
Cable box
FOCUS +
FOCUS –
Adjust the focus of the
picture.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
a) “SIDE A/B” appears for non-Sony LD players.
b) Only with Sony TVs with the picture-in-picture
function.
c) Only with Sony TVs that supports the wide-picture
mode.
d) Only with the Sony CD changer.
Note
If you have programmed the remote to control non-
Sony components, note the following:
– All the items may not appear when you select a
component.
– All the items displayed may not function.
Tip
Do the following procedure to perform title and set up
menu operations on the DVD player.
1 Select the DVD player from the function list.
2 Press SUB.
3 Move the easy scroll key to select “TITLE” (for the
title menu) or “SET UP” (for the set up menu), then
press the key to enter the selection.
4 Open up the cover on the remote and move the easy
scroll key to select “DVD” from the CURSOR
TYPE list, then press the key to enter the selection.
5 Use the cursor buttons and the ENTER/EXECUTE
button to perform menu operations on the DVD
player.
To exit the menu operation, press SUB, move the
easy scroll key to select “TITLE” or “SET UP”, then
press the key to enter the selection.
To display the DVD menu, use the AV MENU
button. For details, see “wd AV MENU button” on
page 59.
Tip
You can freely assign codes to SUB1 through SUB5.
Select when you transmit learned codes. For details,
see “Learning the commands of your components” on
page 70.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the lists
Chart of lists
See the treelike chart below for the list hierarchy. Details on how to access each list is given from
page 65. Some items have sub-lists that appear when you press SUB (see pages 61–62).
VIDEO1
VIDEO2
VIDEO3
DVD/LD
TV/SAT
TAPE
Deck A/B status information
MD/DAT
CD/SACD
TUNER
Press
FUNCTION
Disc name (memo) list1)
Preset station list
PHONO
USER1
USER2
MACRO1
MACRO2
2ND ROOM
2nd room function list
3rd room function list
3RD ROOM2)
Press
Sound field list
SOUND FIELD
LEVEL list
IR SET list
RECEIVER
IR SET
CATEGORY list
PROGRAM list
MAKER list
MACRO 1/2 list
BUTTON list
CATEGORY list
Press
MAKER list
FUNCTION list
SET UP
LEARNING
FUNCTION list
BUTTON list
FUNCTION
DOWNLOAD
MENU SORT
AUTO POWER
BACK LIGHT
CONTRAST
SOUND FIELD list
TV INPUT list
SOUND FIELD
TUNER INFO
CD DISC NAME
Exit
COMMAND MODE
ALL CLEAR
1) Appears only when the receiver is connected to
CONTROL A1/A1 conpatible CD changer (5, 50, 200,
300 or 400 discs).
2) This function is not available for this receiver.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional procedures after
selecting a component
Selecting a component
Basic procedure for selecting a
component
Do the procedure below to select a component
from the function list.
If you selected tuner
Do the procedure below after you have selected
the tuner.
1 Move the easy scroll key.
1 Press FUNCTION.
The preset station list appears.
The function list appears. The items in the
list correspond with the jacks on the
receiver.
2 Move the easy scroll key to select the
preset station, then press the key to
enter the selection.
MD/DAT
pCD/SACD
TUNER
The current status of the component appears
in the display window.
PHONO
Note
If you have changed the contents of the preset station
memory of the receiver, be sure to download the
preset station memory from the receiver (see page 71)
before you tune in to a preset station.
2 Move the easy scroll key to select a
component from the list, then press the
key to enter the selection.
Information about the component appears in
the display window.
If you selected CD player, tape deck,
or MD deck
Detailed information about the component
appears in the display window of the remote
only if the component is compatible with
A display example
Selected component
Category
<CD/SACD >
CD1
Maker of the
component
Sony
CONTROL A1/A1
.
The information that appears is as follows:
Tips
If you have selected
The following information
appears
• You can modify the category indication. The
category indication tells you what component is
actually connected to the jacks on the receiver. If a
component is connected to jacks for which they are
not originally meant, you can modify the category
indication to match the component. For details, see
“Programming the remote” on page 66.
• You can set the remote to automatically turn on a
component when it is selected from the function
list. For details, see “Using the auto power
function” on page 74.
CD player
The first 12 characters of the
disc memo, track number, and
track text
MD deck
The first 12 characters of the
disc name, track number, and
track name
Tape deck, CD player,
or MD deck
The current deck operation
(N, X or x) to the right of
the component indication
Depending on the component that you selected,
you may have to do an additional procedure, or
you may be able to obtain detailed information
about the component by doing an additional
procedure. For details, see “Additional
procedures after selecting a component” on this
page.
continued
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the lists (continued)
Selecting a sound field
Do the procedure below to select a sound field
from the sound field list.
If you selected a Sony CD changer
1 Move the easy scroll key.
1 Press SOUND FIELD.
The DISC MEMO list appears.
The sound field list appears.
2 Move the easy scroll key to select a
disc, then press the key to enter the
selection.
2 Move the easy scroll key to select the
sound field, then press the key to enter
the selection.
A display example
3 Start playback.
NORMAL SURROUND
C.STUDIO EX A
C.STUDIO EX B
pC.STUDIO EX C
Note
If you have changed the discs in the changer, be sure
to download the CD memos from the receiver (see
page 71) or play the newly inserted disc(s) before you
select a disc from the changer.
To turn off the sound field
If you selected the tape deck
Move the easy scroll key to display the
information about deck A or B.
Move the easy scroll key to select either “2CH
STEREO” or “A.F.D.” in the sound field list in
the display.
Note
Tip
You can sort the sound field (page 73).
When the remote is programmed to control a
non-Sony tape deck, the following may occur:
Programming the remote
– The information about deck B is not displayed and
you cannot switch between tape deck A and B.
– “TAPE A/B” is displayed and tape deck A and B
switch automatically each time you press the easy
scroll key, etc.
You can customize the remote to match the
components connected to your receiver. You
can even program the remote to control non-
Sony components and also Sony components
that the remote is normally unable to control.
If you selected 2ND ROOM
Move the easy scroll key to select the source
for 2nd room, then press the key.
The procedure below uses as an example a case
in which a Kenwood LD player is connected to
the VIDEO 2 jacks on the receiver.
Before you begin note that:
– You cannot change the settings of TUNER and
PHONO.
– The remote can control only components that
accept infrared wireless control signals.
Be sure to turn on the receiver and point
the remote towards the receiver when
performing the following procedure.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press SET UP.
To cancel programming
The set up list appears.
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
pRECEIVER
IR SET
LEARNING
DOWNLOAD
Tip
You can freely assign any component to USER 1 and
2 items in the IR SET list
2 Move the easy scroll key to select “IR
SET”, then press the key to enter the
selection.
1 Do steps 1 and 2 in “Programming the Remote”.
2 Move the easy scroll key to select “USER 1” or
“USER 2,” then press the key to enter the selection.
3 Continue from step 3 in “Programming the Remote”
to select the category and maker of the component.
The IR SET list appears.
<IR SET>
Note
[VIDEO 1 ]
p[VIDEO 2 ]
[VIDEO 3 ]
If you select “IR SET” for a component that already
has a learned button setting, the learned codes for that
component are cleared. Furthermore, if the cleared
learned button is used in a Macro Play setting, the
setting for that button will be changed to “NO SET”.
3 Move the easy scroll key to select the
component (“VIDEO 2”, for example),
then press the key to enter the
selection.
Performing several
commands in sequence
automatically (Macro Play)
The category list appears.
Category?
pVCR
The Macro Play function lets you link several
IR codes in a sequential order as a single
command. The remote provides 2 macro lists
(MACRO 1 and 2). You can specify up to 16
IR codes for each macro list.
T V
L D
4 Move the easy scroll key to select the
category (i.e., the component that is
actually connected to the
Setting the sequence of IR codes
corresponding jacks; in this case,
“LD”), then press the key to enter the
selection.
1 Press SET UP.
The set up list appears.
The maker list appears.
pRECEIVER
IR SET
Maker?
Sony
LEARNING
DOWNLOAD
DENON
pKenwood
2 Move the easy scroll key to select “IR
SET”, then press the key to enter the
selection.
5 Move the easy scroll key to select the
maker of the component (“Kenwood”,
for example), then press the key to
enter the selection.
The IR SET list appears.
<IR SET>
pMACRO1
MACRO2
Exit
When programming the remote to
control Sony component
Select “Sony.”
Programming is now completed.
continued
67
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Move the easy scroll key to select the
IR code for the operation you want to
perform, then press the key to enter the
selection.
Using the lists (continued)
3 Move the easy scroll key to select
“MACRO1” (or “MACRO2”), then press
the key to enter the selection.
The program list reappears.
<MACRO1>
p 1-POWER
2-NO SET
3-NO SET
The program list appears.
<MACRO1>
p 1-NO SET
2-NO SET
3-NO SET
8 Repeat steps 4 through 7 to program
up to 16 IR codes.
4 Move the easy scroll key to select the
macro step number (“1-NO SET” for
example) then press the key to enter
the selection.
When you have finished programming IR
codes, select “Exit” in step 7.
To use learned codes under the
Macro Play function
The category list appears.
1 In step 4, move the easy scroll key to select
“Button”, then press the key to enter selection.
Category?
Common
Button
pVCR
2 Move the easy scroll key to select the button of
the learned codes.
When selecting a button, you can press the
button directly, instead of scrolling down the
list, to jump to the desired button in the list and
transmit the IR code.
5 Move the easy scroll key to select the
component category (“VCR” for
example), then press the key to enter
the selection.
To delay the output of an IR code
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
The maker list appears.
Maker?
pSony VTR1
Sony VTR2
Sony VTR3
2 Move the easy scroll key to select “WAIT
TIME”, then press the key to enter selection.
3 Move the easy scroll key to select the time to
delay the output of an IR code, then press the
key to enter selection. You can specify from 1
to 10 second delay (in 1 second increments).
6 Move the easy scroll key to select the
maker, then press the key to enter the
selection.
The function list appears.
Function?
p*POWER
*PLAY
*STOP
68
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase a programmed IR code
Starting macro play
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
1 Press FUNCTION.
The function list appears.
DVD/LD
pTV/SAT
TAPE
2 Move the easy scroll key to select “NO SET”,
then press the key to enter selection.
To turn off all Sony components
(SYSTEM STANDBY)
1 In step 4, move the easy scroll key to select
“Common”, then press the key to enter
selection.
MD/DAT
2 Move the easy scroll key to select
“MACRO1” or “MACRO2”, then press
the key to enter the selection.
The IR codes appear in the display window
as they are performed.
2 Move the easy scroll key to select “ALL OFF”,
then press the key to enter selection.
However, this function cannot be applied to
some Sony components.
Notes
• Pressing any of the following buttons during a
macro play operation will cancel the macro play
sequence before it is complete.
– AV ?/1
– ?/1
– SYSTEM STANDBY
– SOUND FIELD
To cancel programming
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
Tips
– FUNCTION
• In step 6, when “*” is displayed in front of the
function, the function is pre-programmed.
• In step 3 and 7, when “NO SET” is displayed after
the program number, the codes have not been
programmed.
– SET UP
• When the Macro Play function does not work
properly, set “WAIT TIME” between each
operation.
Note
continued
If you select “IR SET” for a component that already
has a learned button setting, the learned codes for that
component are cleared. Furthermore, if the cleared
learned button is used in a Macro Play setting, the
setting for that button will be changed to “NO SET”.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Point the remote code receiver section
of the commander toward the receiver/
transmitter on the remote control to be
learned.
Using the lists (continued)
Learning the commands of
your components
S
O
U
N
D
F
I
E
L
D
S
E
T
U
P
By using the Learning function, it is possible
for this commander to perform learned
operations.
About 5 cm – 15 cm
5 Move the easy scroll key to select
“Learning Start”, then press the key to
enter the selection.
Setting remote control codes that
are not stored in the commander
When a remote control code is not one of the
presets stored in the commander, it is possible
for the commander to learn the code using the
Learning function.
“Learning Now!!” is displayed.
6 Press the appropriate button on the
remote control to send the remote
control code.
1 Press SET UP and move the easy scroll
key to select “LEARNING”, then press
the key to enter the selection.
Lightly pressing the button once should be
sufficient. In about 3 to 5 seconds, it is
displayed whether learning was successful
or not.
The function list appears.
When the learning completes successfully,
“Learning OK!”, the number of keys, and
the capacity used for learning are displayed.
<LEARNING>
[VIDEO 1 ]
p[VIDEO 2 ]
[VIDEO 3 ]
[VIDEO 2 ]
x(REVERSE)
Learning OK!
2 Move the easy scroll key to select the
function you want to use the Learning
function, then press the key to enter
the selection.
(15/80
20%)
When the learning does not complete
successfully, the cause is displayed.
The button list appears.
[VIDEO 2 ]
* POWER
Learning NG!
(REVERSE)
Information*
p REVERSE
* PLAY
FULL (Keys)
pExit
* FULL (Keys): shortage of buttons
FULL (memory): shortage of memory
ERROR: other causes
3 Move the easy scroll key to select the
button you want to use for the Learning
function, then press the key to enter
the selection.
The learning display appears.
Function
Button
[VIDEO 2 ]
(REVERSE)
p Learning Start
Cancel
70
Download from Www.Somanuals.com. All Manuals Search And Download.
To enter a name for SUB 1–5
1 In step 5, move the easy scroll key to select
“Name”, then press the key to enter selection.
Downloading data from the
Receiver
The remote communicates with the receiver
every time a button is pressed on the remote
and displays the current operation status of the
receiver on the display window. The remote
can also download index names of the program
sources, preset stations, CD disc names
(memos)*, and information indicating the
presence or absence of a CD in each slot of a
CD changer* from the receiver.
2 Use the easy scroll key to create a name (up to
8 characters).
+/–: select a character
</>: move the cursor
Insert: insert a space
Delete: delete a character
To cancel learning
Move the easy scroll key to select “Exit” or
“Cancel” during any step, then press the key to
enter the selection.
* Appears only when you have selected a Sony CD
changer (5, 50, 200, 300, or 400 discs) connected to
the receiver using the CONTROL A1 cable.
To erase the learned code
Be sure to turn on the receiver and point
the remote towards the receiver when
performing the following procedure.
In step 5 above, move the easy scroll key to
select “Clear”, then press the key to enter the
selection. Again, move the easy scroll key to
select “Yes”, then press the key to enter the
selection. The number of buttons and the
capacity used for learning are displayed.
1 Press SET UP.
The set up list appears.
2 Move the easy scroll key to select
“DOWNLOAD”, then press the key to
enter the selection.
Tips
• The marks that are displayed in front of the button
name indicate the following:
x : already learned
The DOWNLOAD list appears.
<DOWNLOAD>
pFUNCTION
SOUND FIELD
TUNER INFO
*: pre-programmed
• In step 3, learned buttons can be selected directly. If
you press the button you want to use for the
Learned function, the list will jump to the same
button.
• The Learned function can be applied to the SUB
menus. SUB 1–5 can be learned.
3 To download index names
Move the easy scroll key to select
“FUNCTION”, then press the key to enter
the selection.
Notes
• You can program up to 80 buttons for the Learned
function. However, in some cases, you may not be
able to program even if you have not programmed
80 buttons.
• If you select “IR SET” for a component that already
has a learned button setting, the learned codes for
that component are cleared. Furthermore, if the
cleared learned button is used in a Macro Play
setting, the setting for that button will be changed to
“NO SET”.
To download sound field names
Move the easy scroll key to select “SOUND
FIELD”, then press the key to enter the
selection.
To download preset stations
Move the easy scroll key to select “TUNER
INFO”, then press the key to enter the
selection.
Using a command that has been
learned
When selecting a learned function, press the
button used to learn that function.
continued
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the lists (continued)
Note on downloading CD disc names
from the CD players
You can download CD disc names (memos) only
from the CONTROL A1/A1 -compatible Sony CD
players. Depending on the CD player setting, it
may take several minutes to download CD disc
names (memos). For faster transmission, make the
following CD player settings.
To download CD disc names (memos)
and information on the presence or
absence of a CD in each slot of a CD
changer
This function is available only when the
category for the CD function in the IR SET
list is set to “CD2” or “CD3”. When the
category is set to “CD1”, CD DISC NAME
does not appear in the DOWNLOAD list.
1 Move the easy scroll key to select “CD
DISC NAME” then press the key to enter
the selection.
When an CONTROL A1/A1 -compatible
Sony CD player is connected to the
receiver
Set the category for the CD function in the IR SET
list to “CD1”. When using the Sony CD changer,
set it to “CD2” (or “CD3”). Be sure to set the
category to only one of “CD1”, “CD2” or “CD3”.
You can check the current category setting by
selecting a component from the function list (see
page 65).
The SORT menu appears in the display.
When multiple CONTROL A1/A1
compatible Sony CD players are connected
to the receiver
-
<SORT? >
pNUMBER
ALPHABET
When you use two CD players, set the
COMMAND MODE selector on the back panel of
the CD players to “CD1” or “CD2,” respectively,
and set the category in the IR SET list to match the
corresponding player’s COMMAND MODE
selector position (see page 66). When you use three
CD players, set the COMMAND MODE selector to
“CD1,” “CD2,” or “CD3,” respectively, and set the
category in the IR SET list to match the
corresponding player’s COMMAND MODE
selector position.
2 Move the easy scroll key to select
“NUMBER” or “ALPHABET”, then press
the key to enter the selection.
The remote starts to download the data.
<LOADING>
[xxx
pCancel
]
When using the Sony CD changer, be sure to set to
“CD2” or “CD3”.
To cancel the downloading process
When setting category for the CD players, do not
skip the number or select the same number to the
multiple players.
Move the easy scroll key to select “Exit” from
the DOWNLOAD list, then press the key to
enter the selection.
When an CONTROL A1/A1 -compatible
Sony CD player and a non-compatible Sony
CD player are connected to the receiver
Set the COMMAND MODE selector on the back
panel of the CONTROL A1/A1 -compatible CD
player to “CD2” and set the category in the IR SET
list for the player to “CD2” (see page 66).
Notes
• If you have changed the discs in the CD changer, be
sure to download the CD disc names (memos) from
the receiver or play the newly inserted disc(s)
before you select a disc from the changer.
Set the COMMAND MODE selector on the back
panel of the non-compatible CD player to “CD1”
and set the category in the IR SET list for the
player to “CD1” (see page 66).
• You can download the data only from the Sony CD
changer (5, 50, 200, 300, or 400 discs) connected to
the receiver using the CONTROL A1 cable.
• CD DISC NAME is available for up to 400 discs.
When using a non-Sony CD player in
conjunction with Sony CD players
Program the remote to control the non-Sony CD
player (see page 66).
See the sections above for settings of the Sony CD
players.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the level
parameters
Other Operations
Sorting the menu
You can arrange the order of sound field list.
1 Press SET UP.
The set up list appears.
1 Press SET UP.
pRECEIVER
IR SET
The set up list appears.
IR SET
LEARNING
DOWNLOAD
LEARNING
DOWNLOAD
pMENU SORT
2 Move the easy scroll key to select
“RECEIVER”, then press the key to
enter the selection.
2 Move the easy scroll key to select
“MENU SORT”, then press the key to
enter the selection.
The RECEIVER list appears.
<RECEIVER>
pLEVEL
Exit
The MENU SORT list appears.
<MENU SORT>
pSOUND FIELD
Exit
3 Move the easy scroll key to select
“LEVEL”, then press the key to enter
the selection.
3 Move the easy scroll key to select
“SOUND FIELD”, then press the key to
enter the selection.
The LEVEL list appears.
<LEVEL>
The sort list appears.
pFRONT BAL
SURR BAL
Sort?
pA.F.D.
SURR BACK BAL
2CH STEREO
MULTI/2CH A.DIR
4 Move the easy scroll key to select the
menu you want to adjust, then press
the key to enter the selection.
4 Move the easy scroll key to select the
menu you want to move, then press the
key to enter selection.
5 To adjust the balance
Move the easy scroll key to select the
channel (L or R) you want to increase the
level, then press the key to enter the
selection.
When you press the key, “p” changes to
“=”.
Sort?
A.F.D.
To adjust the level
=2CH STEREO
MULTI/2CH A.DIR
Move the easy scroll key to select + (to
increase the level) or – (to decrease the
level), then press the key to enter the
selection.
5 Move the easy scroll key to select the
position you want to move the menu to,
then press the key to enter selection.
To cancel adjusting
When you press the key, “=” changes to
“p”.
Move the easy scroll key to select “Exit”
during any step, then press the key to enter the
selection.
Sort?
NORMAL SURROUND
C.STUDIO EX A
p2CH STEREO
continued
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the lists (continued)
Turning the backlight on or off
Each time you press a button on the remote, the
backlight turns on. If you do the procedure
below to turn off the backlight, you can make
the batteries last longer.
Using the auto power function
With the auto power function turned on, the
commander sends numerous codes to the
appropriate Sony AV components when you
select a video function. Automatically, the
components and the TV you have done IR
setting turn on and the TV switches to the
selected input mode. This function works for
Sony components only.
1 Press SET UP.
The set up list appears.
DOWNLOAD
MENU SORT
AUTO POWER
pBACK LIGHT
1 Press SET UP.
2 Move the easy scroll key to select
“BACK LIGHT”, then press the key to
enter the selection.
The set up list appears.
LEARNING
DOWNLOAD
The BACK LIGHT list appears .
MENU SORT
pAUTO POWER
<BACK LIGHT>
pOn
Off
2 Move the easy scroll key to select
“AUTO POWER”, then press the key to
enter the selection.
3 Move the easy scroll key to select “On”
or “Off”, then press the key to enter the
selection.
The AUTO POWER list appears.
<AUTO POWER>
pOn
Adjusting the contrast of the display
You can adjust the contrast of the display.
Off
1 Press SET UP.
3 Move the easy scroll key to select “On”
or “Off”, then press the key to enter the
selection.
The set up list appears.
MENU SORT
AUTO POWER
BACK LIGHT
pCONTRAST
When you select “On”, the TV INPUT list
appears.
<TV INPUT>
pTV-VIDEO1
TV-VIDEO2
TV-VIDEO3
2 Move the easy scroll key to select
“CONTRAST”, then press the key to
enter the selection.
<CONTRAST>
4 Move the easy scroll key to select the
video input of the TV, then press the
key to enter the selection.
p+
-
Notes
• Switching to VIDEO 1–4 input may not be
automatic on all Sony TVs. This is because some
TVs cannot receive remote control codes
immediately after being turned on.
• When you select “(Off)” in step 4, the TV input
does not switch.
3 Move the easy scroll key to select “+”
or “–”, then press the key to enter the
selection.
Each time you press the key, the contrast of
the display changes. To cancel adjusting,
move the easy scroll key to select “Exit”,
then press the key to enter the selection.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the COMMAND MODE
Clearing all the contents of remote’s
memory
You can switch the command mode (AV
SYSTEM1 or AV SYSTEM2) of the remote. If
the command mode of the receiver and the
remote is different, you cannot use the remote
to operate the receiver.
Be sure to turn on the receiver and point
the remote towards the receiver when
performing the following procedure.
1 Press SET UP.
1 Press SET UP.
The set up list appears.
The set up list appears.
BACK LIGHT
CONTRAST
AUTO POWER
BACK LIGHT
CONTRAST
COMMAND MODE
pALL CLEAR
pCOMMAND MODE
2 Move the easy scroll key to select “ALL
CLEAR”, then press the key to enter
the selection.
2 Move the easy scroll key to select
“COMMAND MODE”, then press the key
to enter the selection.
The ALL CLEAR list appears.
The COMMAND MODE list appears.
<ALL CLEAR?>
<COMMAND MODE>
pAV SYSTEM1
AV SYSTEM2
3RD ROOM
Yes
pNo
3 Move the easy scroll key to select
“Yes”, then press the key to enter the
selection.
3 Move the easy scroll key to select “AV
SYSTEM1” or “AV SYSTEM2”, then
press the key to enter the selection.
“CLEAR OK?!” appears.
Tip
<CLEAR OK?!>
When the remote is turned on, the COMMAND
MODE appears in the first line of the display.
Yes
pNo
Note
“3RD ROOM” is not available for this receiver.
4 Move the easy scroll key to select
“Yes” again, then press the key.
All the contents of the remote’s memory (i.e.,
all the programmed data) are cleared.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Precautions
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem. Also, see “Checking the connections”
on page 25 to verify that the connections are
correct. Should any problem persist, consult
your nearest Sony dealer.
On safety
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
On power sources
• Before operating the unit, check that the operating
voltage is identical with your local power supply.
The operating voltage is indicated on the nameplate
at the rear of the receiver.
There is no sound no matter which component
is selected.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the receiver itself has been turned off.
• If you are not going to use the receiver for a long
time, be sure to disconnect the receiver from the
wall outlet. To disconnect the AC power cord,
grasp the plug itself; never pull the cord.
• AC power cord must be changed only at the
qualified service shop.
• Check that both the receiver and all components
are turned on.
• Check that the MASTER VOLUME control is
not set at –∞ dB.
• Check that the SPEAKERS switch is not set to
OFF (see page 27).
• Check that all speaker cords are connected
correctly.
On heat buildup
• Press MUTING to cancel the muting function.
Although the unit heats up during operation, this is
not a malfunction. If you continuously use this unit at
a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
“Not PCM” appears in the display and no sound
is heard.
• Set “DECODE FORMAT” to “AUTO” in the
SET UP menu (page 51).
On placement
There is no sound from a specific component.
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Check that the component is connected correctly
to the audio input jacks for that component.
• Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any question or problem concerning your
receiver, please consult your nearest Sony dealer.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from one of the front
speakers.
There is no sound from the center speaker.
• Make sure the sound field function is on (press
MODE +/–).
• Connect a pair of headphones to the PHONES
jack to verify that sound is output from the
headphones (see page 28).
• Select a sound field containing the word
“CINEMA” or “VIRTUAL” (see pages 30–32).
If only one channel is output from the
headphones, the component may not be
connected to the receiver correctly. Check that
all the cords are fully inserted into the jacks on
both the receiver and the component.
• Adjust the speaker level (see page 25).
• Make sure the center speaker size parameter is
set to either “SMALL” or “LARGE” (see page
20).
There is no sound or only a very low-level sound
is heard from the surround/surround back
speakers.
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection of the
front speaker which is not outputting any sound.
• Make sure the sound field function is on (press
MODE +/–).
There is no sound or only a very low-level sound
is heard.
• Select a sound field containing the word
“CINEMA” or “VIRTUAL” (see pages 30–32).
• Check that the speakers and components are
connected securely.
• Adjust the speaker level (see page 25).
• Make sure the surround/surround back speaker
size parameter is set to either “SMALL” or
“LARGE” (see pages 20–21).
• Check that you have selected the correct
component on the receiver.
• Check that the SPEAKERS switch is set to ON
The surround effect cannot be obtained.
(see page 27).
• Make sure the sound field function is on (press
• Check that the headphones are not connected.
MODE +/–).
• Press MUTING to cancel the muting function.
• Sound fields do not function for the signals with
a sampling frequency of more than 48 kHz.
• The protective device on the receiver has been
activated because of a short circuit. Turn off the
receiver, eliminate the short-circuit problem and
turn on the power again.
• When the INPUT MODE is set to “AUTO
MULTI CH 1 or 2” and no digital signal is input,
or INPUT MODE is set to “MULTI CH 1 or 2
FIXED”, you cannot change the sound field
(page 27).
• When only a very low-level sound is heard,
check to see if NIGHT MODE is activated (see
page 33).
Dolby Digital or DTS multi channel sound is not
reproduced.
The left and right sounds are unbalanced or
reversed.
• Check that the playing DVD, etc. is recorded in
Dolby Digital or DTS format.
• Check that the speakers and components are
connected correctly and securely.
• When connecting the DVD player, etc. to the
digital input jacks of this receiver, check the
audio setting (settings for the audio output) of the
connected component.
• Adjust balance parameters in the LEVEL menu.
There is severe hum or noise.
• Check that the speakers and components are
connected securely.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
continued
• Move your TV away from the audio components.
• Make sure you have grounded U SIGNAL GND
terminal (only when a turntable is connected).
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
Radio stations cannot be tuned in.
• Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
Recording cannot be done.
• Check that the components are connected
correctly.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
• Select the source component with FUNCTION
control.
• Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning).
• When recording from a digital component, make
sure the INPUT MODE is set to ANALOG 2CH
FIXED (see page 27) before recording with a
component connected to the analog MD/DAT or
TAPE terminals.
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations (see
page 45).
• When recording from a digital component, make
sure the INPUT MODE is set to COAXIAL
FIXED or OPTICAL FIXED (see page 27)
before recording with the component connected
to the DIGITAL MD/DAT OUT terminals.
• Press DISPLAY so that the frequency appears in
the display.
RDS does not work.*
• Make sure that you’re tuned to an FM RDS
station.
To connect an LD player via an RF demodulator
• Select a stronger FM station.
• Connect the LD player to the RF demodulator,
then connect the RF demodulator’s optical or
coaxial digital output to the receiver’s DVD/LD
OPTICAL IN or COAXIAL jack. When making
this connection, be sure to set INPUT MODE
manually (see page 27). The receiver may not
operate correctly if INPUT MODE is set to
AUTO 2CH.
The RDS information that you want does not
appear.*
• Contact the radio station and find out whether or
not they actually provide the service in question.
If so, the service may be temporarily out of
order.
There is no picture or an unclear picture appears
on the TV screen or monitor.
For details on DOLBY DIGITAL RF hookups,
see the operating instructions supplied with your
RF demodulator.
• Select the appropriate function on the receiver.
• Set your TV to the appropriate input mode.
• Move your TV away from the audio components.
The FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied) to
connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the
ground wire to a gas pipe.
* Models of area code CEL only.
Outdoor FM antenna
Receiver
ANTENNA 75Ω COAXIAL
FM
U
AM
Ground wire
(not supplied)
To ground
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Specifications
The remote does not function.
• Point the remote at the remote sensor
the receiver.
on
Amplifier section
Models of area code E:
• Remove any obstacles in the path between the
remote and the receiver.
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
100 W + 100 W1)
• Replace all the batteries in the remote with new
ones, if they are weak.
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
90 W + 90 W1)
• If the receiver’s COMMAND MODE and the
remote’s COMMAND MODE do not match,
transmission is not possible between the remote
and the receiver.
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT3): 100 W + 100 W
CENTER3): 100 W
• Make sure you select the correct function on the
remote.
SURR3): 100 W + 100 W
SURR BACK3): 100 W
• When you operate a programmed non-Sony
component, the remote may not function
properly depending on the model and the make
of the component.
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT3): 90 W + 90 W
CENTER3): 90 W
SURR3): 90 W + 90 W
SURR BACK3): 90 W
The component names appearing in the function
list do not correspond to the jacks on the
receiver./The sound field list does not appear.
Models of area code CN, CEL:
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W1)
• The remote has not been initialized. Turn on the
receiver, point the remote at the receiver, and
press SOUND FIELD, FUNCTION, or SUB on
the remote (see page 56).
90 W + 90 W2)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W1)
80 W + 80 W2)
E appears in the display window of the remote.
• The batteries are running out. Replace all the
batteries with new ones.
Reference Power Output1)
(8 ohms 1 kHz, THD 0.7 %)
FRONT3): 100 W + 100 W
The function names that appear in the display
windows of the receiver and the remote are
different.
CENTER3): 100 W
SURR3): 100 W + 100 W
SURR BACK3): 100 W
(4 ohms 1 kHz, THD 0.7 %)
• Select the correct function using the remote.
FRONT3): 90 W + 90 W
CENTER3): 90 W
When the CD player, tape deck, or MD deck is
connected to the receiver via CONTROL A1/A1
jacks, Auto Function does not work properly.
SURR3): 90 W + 90 W
SURR BACK3): 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT3): 90 W + 90 W
• Reprogram the remote (see page 66).
CENTER3): 90 W
SURR3): 90 W + 90 W
SURR BACK3): 90 W
Reference sections for clearing the
memory
(4 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT3): 80 W + 80 W
CENTER3): 80 W
To clear
See
SURR3): 80 W + 80 W
SURR BACK3): 80 W
All memorized settings
Customized sound fields
All the settings in the remote
page 18
page 41
page 75
continued
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Outputs
Specifications (continued)
TAPE, MD/DAT
Voltage: 150 mV
(REC OUT), VIDEO
1, 2 (AUDIO OUT)
Impedance: 22 kilohms
1) Measured under the following conditions:
Area code
E
Power requirements
240 V AC, 50 Hz
230 V AC, 50 Hz
FRONT L/R,
CENTER,
SURROUND L/R,
SURROUND BACK,
SUB WOOFER
Voltage: 2 V
Impedance: 1 kilohms
CN, CEL
2) Measured under the following conditions:
Area code
Power requirements
EQ
BASS:
CN
220 V AC, 50 Hz
99 Hz~1.0 kHz
(21 steps)
3) Depending on the sound field settings and the
source, there may be no sound output.
MID (FRONT L/R, CENTER only):
198 Hz~10 kHz
Frequency response
(36 steps)
TREBLE:
1.0 kHz~10 kHz
(23 steps)
±10 dB, 1 dB step
RIAA equalization curve
±0.5 dB
PHONO
Gain levels:
CD/SACD, TAPE,
10 Hz – 100 kHz
MD/DAT, TV/SAT,
+0.5/–2 dB (with sound
DVD/LD, VIDEO 1, 2, field, equalizer, and bass
FM tuner section
Tuning range
87.5 – 108.0 MHz
3
boost bypassed)
Antenna terminals
75 ohms, unbalanced
Inputs (Analog)
Sensitivity
Mono:
Stereo:
Sensitivity: 2.5 mV
Impedance: 50 kilohms
S/N4): 86 dB (A, 2.5 mV5))
PHONO
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
Sensitivity: 150 mV
Impedance: 50 kilohms
S/N4): 100 dB
(A, 150 mV5))
MULTI CHANNEL
INPUT 1, 2, CD/
SACD, TAPE, MD/
DAT, DVD/LD, TV/
SAT, VIDEO 1, 2, 3
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono:
Stereo:
76 dB
70 dB
Harmonic distortion at 1 kHz
Mono:
Stereo:
0.3%
0.5%
4) INPUT SHORT.
5) Weighted network, input level.
Separation
45 dB at 1 kHz
Inputs (Digital)
CD/SACD, DVD/LD
(Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
(A, 20 kHz LPF)
DVD/LD, TV/SAT,
MD/DAT (Optical)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
80
Download from Www.Somanuals.com. All Manuals Search And Download.
AM tuner section
General
Tuning range
Power requirements
Models of area code E
Area code
Power requirements
With 10-kHz tuning scale: 530 – 1610 kHz6)
With 9-kHz tuning scale: 531 – 1602 kHz6)
Models of area code CN, CEL
With 9-kHz tuning scale: 531 – 1602 kHz
CEL
CN
E
230 V AC, 50/60 Hz
220 – 230 V AC, 50/60 Hz
120/220/240 V AC, 50/60 Hz
Antenna
Loop antenna
Power consumption
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
Area code
CN, CEL
E
Power consumption
390 W
400 W
S/N
54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m,
400 Hz)
Power consumption (during standby mode)
1 W
Selectivity
At 9 kHz:
At 10 kHz:
35 dB
40 dB
AC outlets
Area code
AC outlets
6) You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down TUNING + and press
?/1. All preset stations will be erased when you
change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
CEL
E
1 switched, 100 W MAX
2 switched, 100 W MAX
Dimensions
430 × 175 × 465 mm
including projecting parts
and controls
Video section
Inputs
Video:
Mass (Approx.)
20.0 kg
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
S-video:
Remote commander RM-LJ305 (1)
LR6 (size-AA) batteries (3)
Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
For details on the area code of the component you
are using, see page 2.
Remote control
Remote control system
Design and specifications are subject to change
without notice.
Infrared control
Power requirements 4.5 V DC with three LR6
(size-AA) alkaline
batteries
Dimensions
175 × 62 × 33 mm
Mass (approx.)
135 g excluding batteries
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Tables of settings using SURROUND, LEVEL, EQ, and SET
UP buttons
You can make various settings using the LEVEL, SURROUND, EQ, SET UP buttons, jog dial, and
cursor buttons. The tables below show each of the settings that these buttons can make.
Press
Press
or
to select
Turn jog dial to select
Page
SURROUND
2CH DECODING
2CH MODE
AUTO, ON, OFF
37
PRO LOGIC, PLII MOVIE, PLII MUSIC,
Neo: Cinema, Neo: Music
C.WIDTH L__C__R1)
DIMENSION F__I__S1)
PANORAMA MODE1)
EFFECT LEVEL
WALL S_I_H
(8 steps)
–3 to +3 (1 increment steps)
ON, OFF
0 to 150 % (5 % steps)
–8 to +8 (1 increment steps)
–8 to +8 (1 increment steps)
DRY, WET, STD
REVERB S_I_L
FRONT REVERB
SCREEN DEPTH
VIR.SPEAKERS
SUR.ENHANCER
BASS GAIN
DEEP, MID, OFF
ON, OFF
ON, OFF
–10 dB to +10 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +10 dB (1 dB steps)
1.0 kHz to 10.0 kHz (23 steps)
OFF, AUTO, FIX
BASS FREQ.
TREBLE GAIN
TREBLE FREQ.
TEST TONE2)
LEVEL
39
PHASE NOISE2)
OFF, [L-C], [C-R], [R-SR], [SL-SR], [SR-SBR],
[SBR-SBL], [SBL-SL], [SL-L]
PHASE AUDIO2)
OFF, [L-C], [C-R], [R-SR], [SL-SR], [SR-SBR],
[SBR-SBL], [SBL-SL], [SL-L]
FRONT L_I_R
–8 to +8 (1 increment steps)
SURROUND L_I_R
SUR.BACK L_I_R
CENTER LEVEL
SURROUND LEVEL
SUR.BACK LEVEL
S.WOOFER LEVEL
LFE MIX LEVEL
D.RANGE COMP.
–8 to +8 (1 increment steps)
–8 to +8 (1 increment steps)
(OFF), –20 dB to +10 dB (1 dB steps)
(OFF), –20 dB to +10 dB (1 dB steps)
(OFF), –20 dB to +10 dB (1 dB steps)
(OFF), –20 dB to +10 dB (1 dB steps)
(OFF), –20 dB to 0 dB (1 dB steps)
OFF, 0.1 to 0.9 (0.1 steps), STD, MAX
1) You can set this parameter only when the 2ch decode mode is set to “PL II MUSIC”.
2) One of these parameters appears depending on the T.TONE parameter in the SET UP menu.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
Press
or
to select
Turn jog dial to select
Page
EQ
FRONT BASS GAIN
–10 dB to +10 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +10 dB (1 dB steps)
198 Hz to 10 kHz (37 steps)
WIDE, MID, NARR
41
FRONT BASS FREQUENCY
FRONT MID GAIN
FRONT MID FREQUENCY
FRONT MID BANDWIDTH
FRONT TREBLE GAIN
–10 dB to +10 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
–10 dB to +10 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +10 dB (1 dB steps)
198 Hz to 10 kHz (37 steps)
WIDE, MID, NARR
FRONT TREBLE FREQUENCY
CENTER BASS GAIN
CENTER BASS FREQUENCY
CENTER MID GAIN
CENTER MID FREQUENCY
CENTER MID BANDWIDTH
CENTER TREBLE GAIN
–10 dB to +10 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
–10 dB to +10 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +10 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
–10 dB to +10 dB (1 dB steps)
99 Hz to 1.0 kHz (21 steps)
–10 dB to +10 dB (1 dB steps)
1.0 kHz to 10 kHz (23 steps)
CENTER TREBLE FREQUENCY
SURROUND BASS GAIN
SURROUND BASS FREQUENCY
SURROUND TRE. GAIN
SURROUND TRE. FREQUENCY
SURR BACK BASS GAIN
SURR BACK BASS FREQUENCY
SURR BACK TRE. GAIN
SURR BACK TRE. FREQUENCY
continued
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Tables of settings using SURROUND, LEVEL, EQ, and SET UP buttons
(continued)
Press
Press
or
to select
Turn jog dial to select
LARGE, SMALL
Page
SET UP
FRONT SP
19
CENTER SP
LARGE, SMALL, NO
LARGE, SMALL, NO
LARGE, SMALL, NO
YES, NO
SURROUND SP
SURR BACK SP
SURR BACK L/R
SUB WOOFER
FRONT
YES, NO
1.0 meter to 12.0 meters (0.1 meter steps)
1.0 meter to 12.0 meters (0.1 meter steps)
1.0 meter to 12.0 meters (0.1 meter steps)
1.0 meter to 12.0 meters (0.1 meter steps)
1.0 meter to 12.0 meters (0.1 meter steps)
NORMAL, REVERSE
meter, feet
CENTER
SURROUND
SURR BACK
SUB WOOFER
S.W PHASE
DISTANCE UNIT
SURR POSI.
SIDE, MIDDLE, BEHIND
HIGH, LOW
SURR HEIGHT
SURR BACK HGT.
FRONT SP > 1)
CENTER SP > 1)
SURROUND SP > 1)
SURR BACK SP > 1)
LFE HIGH CUT >
6.1CH DECODING
MULTI CH 1/2
D.POWER
HIGH, LOW
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
40 Hz to 200 Hz (10 Hz steps)
AUTO, ON, OFF
50
NONE, Every function (except for TUNER and PHONO)
AUTO OFF, ALWAYS ON
AUTO OFF, ALWAYS ON
ON, OFF
V.POWER
S.FIELD LINK
DECODE FORMAT
AUTO FUNCTION
2 WAY REMOTE
COMMAND MODE
T.TONE
AUTO, PCM
ON, OFF
ON, OFF
AV1, AV2
NORMAL, PHASE NOISE, PHASE AUDIO
PAL, NTSC
COLOR SYSTEM
OSD
COLOR, MONOCHROME
0 to 64 (1 steps)
OSD H.POSITION
OSD V.POSITION
0 to 32 (1 steps)
1) When the speakers are set to SMALL only.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field
The adjusted SURROUND parameters are stored in each sound field.
The adjusted LEVEL parameters are applied to all the sound fields.
<
SURROUND
>
2CH
2CH
EFFECT
LEVEL
WALL REVERB FRONT SCREEN VIRTUAL
SUR.
BASS/
DECODING MODE
TYPE
TIME REVERB DEPTH SPEAKERS ENHANCER TREBLE
2CH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
A.F.D.
AUTO
ON
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI C.STUDIO EX A
SEMI C.STUDIO EX B
SEMI C.STUDIO EX C
NIGHT THEATER
MONO MOVIE
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
STEREO MOVIE
z
V.MULTI DIMENSION
VIRTUAL MULTI REAR
V.SEMI M.DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
D.CONCERT HALL A
D.CONCERT HALL B
CHURCH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
OPERA HOUSE
z
JAZZ CLUB
z
DISCO/CLUB
z
LIVE HOUSE
z
ARENA
z
STADIUM
z
GAME
z
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE (MULTI 1/2)
HEADPHONE THEATER
MULTI CH IN 1
z
z
z
z
MULTI CH IN 2
2CH ANALOG DIRECT
PCM96K (more than 48 kHz)
continued
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field (continued)
<
LEVEL
>
FRONT
BAL
SURR SURR BACK CENTER SURR SURR BACK S. WOOFER LFE
D.RANGE
COMP
1)
1)
BAL
BAL
LEVEL LEVEL
LEVEL
LEVEL
MIX
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
2CH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI C.STUDIO EX A
SEMI C.STUDIO EX B
SEMI C.STUDIO EX C
NIGHT THEATER
MONO MOVIE
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
STEREO MOVIE
z
V.MULTI DIMENSION
VIRTUAL MULTI REAR
V.SEMI M.DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
D.CONCERT HALL A
D.CONCERT HALL B
CHURCH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z2)
z2)
z2)
z2)
z2)
z
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
z2)
z2)
z2)
z
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE (MULTI 1/2)
HEADPHONE THEATER
MULTI CH IN 1
z
z
z
z
z
z
z
z
z
z
MULTI CH IN 2
2CH ANALOG DIRECT
PCM96K (more than 48 kHz)
1) These parameters may not operate depending on the source or adjustments. For details, see each item in
“Adjusting the level parameters” (page 39).
2) When these sound fields are selected, there is no sound output from the sub woofer if the front speaker size is set
to “LARGE”. However, sound will be output from the sub woofer if the digital input signal contains L.F.E.
signals.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
<
EQ
>
<
FRONT
MID
FREQ
>
BASS
GAIN
BASS
FREQ
MID
GAIN
MID
SLOPE
TREBLE TREBLE
GAIN
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
FREQ
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
2CH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
A.F.D.
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI C.STUDIO EX A
SEMI C.STUDIO EX B
SEMI C.STUDIO EX C
NIGHT THEATER
MONO MOVIE
STEREO MOVIE
V.MULTI DIMENSION
VIRTUAL MULTI REAR
V.SEMI M.DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
D.CONCERT HALL A
D.CONCERT HALL B
CHURCH
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE (MULTI 1/2)
HEADPHONE THEATER
MULTI CH IN 1/2
2CH ANALOG DIRECT
PCM96K (more than 48 kHz)
z
z
z
z
z
z
z
continued
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field (continued)
<
EQ
>
<
CENTER
MID
FREQ
>
BASS
GAIN
BASS
FREQ
MID
GAIN
MID
SLOPE
TREBLE TREBLE
GAIN
FREQ
2CH
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI C.STUDIO EX A
SEMI C.STUDIO EX B
SEMI C.STUDIO EX C
NIGHT THEATER
MONO MOVIE
STEREO MOVIE
V.MULTI DIMENSION
VIRTUAL MULTI REAR
V.SEMI M.DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
D.CONCERT HALL A
D.CONCERT HALL B
CHURCH
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE (MULTI 1/2)
HEADPHONE THEATER
MULTI CH IN 1/2
2CH ANALOG DIRECT
PCM96K (more than 48 kHz)
88
Download from Www.Somanuals.com. All Manuals Search And Download.
<
EQ
>
<
SURROUND/SURROUND BACK
>
BASS
GAIN
BASS
FREQ
TREBLE
GAIN
TREBLE
FREQ
2CH
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORMAL SURROUND
CINEMA STUDIO EX A
CINEMA STUDIO EX B
CINEMA STUDIO EX C
SEMI C.STUDIO EX A
SEMI C.STUDIO EX B
SEMI C.STUDIO EX C
NIGHT THEATER
MONO MOVIE
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
STEREO MOVIE
V.MULTI DIMENSION
VIRTUAL MULTI REAR
V.SEMI M.DIMENSION
VIRTUAL ENHANCED A
VIRTUAL ENHANCED B
D.CONCERT HALL A
D.CONCERT HALL B
CHURCH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
OPERA HOUSE
JAZZ CLUB
DISCO/CLUB
LIVE HOUSE
ARENA
STADIUM
GAME
HEADPHONE (2CH)
HEADPHONE (DIRECT)
HEADPHONE (MULTI 1/2)
HEADPHONE THEATER
MULTI CH IN 1/2
2CH ANALOG DIRECT
PCM96K (more than 48 kHz)
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|