3-095-520-12(1)
Micro HI-FI
Component System
Operating Instructions
CMT-HX9DAB
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Music discs encoded with copyright
protection technologies
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MICROVAULT is a trademark of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and
their logos are trademarks of Sony
Corporation.
U.S. and foreign patents licensed from
Dolby Laboratories.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit
Front panel
Top panel
Continued
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Unit: VOLUME control (page 13,
14, 16, 17)
Remote: VOLUME +/ button
(page 13, 14, 16, 17)
Turn or press to adjust the volume.
AUDIO IN jack (page 17)
Connect to an optional audio
component.
PHONES jack
Connect the headphones.
(open/close) button (page 13)
Press to open or close the disc tray.
(USB) port (page 16, 30)
Connect to an optional USB device
(Digital music player or USB storage
media).
/ (power) button (page 12, 21,
25)
Press to turn on the system.
Playback buttons and function
buttons
Unit: USB (play/pause)
button (page 16)
STANDBY indicator (page 18, 22)
Lights up when the system is turned off.
Press to select the USB function.
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
Remote: USB button (page 16)
Press to select the USB function.
USB MEMORY indicator
Lights up when an optional USB device
(Digital music player or USB storage
media) is connected.
Remote sensor (page 22)
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit: CD (play/pause)
/ (go back/go forward)
button (page 13, 16, 19)
Press to select a track or file.
button (page 13)
Press to select the CD function.
Press to start or pause playback of a disc.
Remote: CD button (page 13)
Press to select the CD function.
Unit: TUNE +/ (tuning) button
(page 14)
Remote: +/ (tuning) button
(page 14, 20)
Press to tune in the desired station.
Remote: (play) button,
(pause) button
Press to start or pause playback.
TUNER/BAND button (page 14)
Press to select the TUNER function.
Press to select FM or AM reception
mode.
+/ (select folder) button
(page 13, 16, 19)
Press to select a folder.
/ (rewind/fast forward)
button (page 13, 16)
Press to find a point in a track or file.
Unit: AUDIO IN button (page 17)
Press to select the AUDIO IN function.
FUNCTION button
Press to select the function.
DAB AUTO SCAN button (page
12)
Press to run the DAB Automatic Scan.
Unit: /CANCEL (stop/cancel)
button (page 13, 14, 16)
Remote: (stop) button (page
13, 14, 16)
Press to stop playback.
Press to cancel search.
Sound buttons (page 18)
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.
SEARCH button (page 13, 16)
Press to enter or exit search mode.
DISPLAY button (page 18)
Press to change the information on the
display.
ENTER button (page 12, 19, 20,
21)
Press to enter the settings.
CLOCK/TIMER SELECT button
(page 21)
CLOCK/TIMER SET button (page
12, 21)
Press to set the clock and the Play Timer.
Continued
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/FM MODE button (page
13, 15, 16)
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
Battery compartment lid
(page 11)
CLEAR button (page 19)
Press to delete a pre-programmed track
or file.
TUNER MEMORY button (page
20)
Press to preset the radio station.
PLAY MODE/TUNING MODE
button (page 13, 14, 16, 19, 20)
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to select the tuning mode.
SLEEP button (page 21)
Press to set the Sleep Timer.
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Play/Pause
Audio format
Tuner reception mode (page 14)
Tuner reception (page 14)
Play mode (page 13, 16)
Timer (page 21)
DSGX (page 18)
DAB service reception
Lights up when secondary service is
received.
Text information
ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
or
DAB external
or
antenna
(not supplied)
Wall socket
Right speaker
Left speaker
or
FM/DAB lead antenna (Extend it horizontally.)
Speakers
Connect white side.
75-ohm coaxial cable with F male type connector
(not supplied)
White side for North American model
Brown side for other regions
AM loop antenna
Power
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
FM/AM antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the remote
DAB antenna
Slide and remove the battery
With a DAB external antenna (not
supplied), you can obtain higher DAB
broadcast sound quality. We recommend
that you use the supplied FM/DAB lead
antenna only temporarily until you install
a DAB external antenna.
compartment lid , and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
When carrying this system
1
2
3
Remove a disc to protect the CD
mechanism.
Press CD
function.
to select the CD
Notes
With normal use, the batteries should last for
Hold down SEARCH
and press
“STANDBY”appears.
on the unit,
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
on the unit until
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
4
After “LOCK”appears, unplug the
power cord.
Speaker pads
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.
Continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To run the DAB Automatic Scan
When you turn on the system for the first
time aſter you purchase the system, DAB
Automatic Scan starts automatically and
creates a list of available services. If you
want to run the DAB Automatic Scan
again, perform the procedure below.
Setting the clock
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
on the
1
Press DAB AUTO SCAN
unit.
“Auto Scan? Push ENTER” appears.
.
Press CLOCK/TIMER SET
.
2
Press ENTER
If the current mode appears on
Scanning begins. “Auto Scan” appears.
Depending on the DAB services
available in your area, scanning may
take a few minutes.
the display, press /
repeatedly to select “CLOCK SET?”
.
and then press ENTER
repeatedly
to set the hour, and then press
3
4
Press /
.
ENTER
When scanning is complete, a list of
available services is created.
Use the same procedure to set
the minutes.
Notes
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
If your country or region does not support
DAB broadcast, “No Service” appears.
Do not press any button on the unit or
the remote during DAB Automatic Scan.
Scanning is interrupted and service list may
not be created properly. In this case, run the
DAB Automatic Scan again.
If you move to another area, repeat this
procedure to store the stations for your new
area.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
is procedure clears all previously stored
presets.
Before unplugging the DAB antenna, make
sure the system is turned off to preserve your
own DAB settings.
is tuner does not support data services.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operation
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press CD
.
Select a folder
on an MP3
disc
Select a track /
or file
+/
.
2
Place a disc.
Press
on the unit, and place
a disc with the label side up on the
disc tray.
.
Select a folder SEARCH . Press
and file on
/
to select
an MP3 disc the desired folder, then
to select
while viewing press ENTER . Press
the folder and /
file names on the desired file, then
.
the display
press ENTER
Find a point in Hold down /
a track or file
during playback, and
To close the disc tray, press
on
release the button at the
desired point.
the unit again.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
3
4
Start playback.
Press (or CD on the unit)
To change the play mode
.
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
(“SHUF” or “
play (“PGM”).
(SHUF)
Play performs the same operation as normal
(shuffle) play.
SHUF*”), or program
*
When playing a CD-DA disc,
Notes on Repeat Play
All tracks or files on a disc are played
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
Continued
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
they are recorded onto the disc.
Listening to the radio
Before you can receive DAB, you
must complete the DAB Automatic
Scan procedure (see “To run the DAB
Automatic Scan” (page 12)).
e system can only play MP3 files that have
a file extension of “.MP3”.
1
2
Select “DAB,”“FM”or “AM.”
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
Press TUNER/BAND
repeatedly.
Select the tuning mode.
Press TUNING MODE
until “AUTO” appears.
repeatedly
MP3 files and folders that can be
3
4
Tune in the desired station.
contained on a single disc is 512.
Press +/ (or TUNE +/ on
folder levels (the tree structure of files) is
8.
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
Notes on playing multisession discs
When you tune in a DAB station or
an FM station that provides RDS
services, the service name or station
name appears on the display.
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
To stop automatic scanning (FM/AM
bands only)
.
Press
To tune in a station with a weak signal
(FM/AM bands only)
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
repeatedly to tune in the desired station.
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To reduce static noise on a weak FM
stereo station
Listening to music of
an USB device
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
You can connect an optional USB device
(Digital music player or USB storage
Notes on listening to DAB stations
When tuning in a DAB station, it may take a
few seconds before you hear any sound.
Primary service is automatically received
when secondary service ends.
media) to the
(USB) port
on the
unit and listen to music stored in the USB
device. See “Playable USB devices” (page
30) for a list of USB devices that can be
connected to this system.
e audio formats that can be played
back by this system are as follows:
ATRAC/MP3*/WMA*/AAC*
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
Continued
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operation
1
2
Select the USB function.
Press USB
.
To
Press
Pause playback (or USB on
Connect an optional USB device
(Digital music player or USB
storage media) to the (USB)
the unit) . To resume
play, press the button
again1).
port
as shown below.
. To resume play,
Stop playback
press (or USB
.
on the unit)
To cancel resume play,
press
again.
Select a folder
Select a file
+/
.
/
.
Select a folder SEARCH . Press
USB device (Digital
music player or USB
storage media)
and file while /
viewing the the desired folder, then
folder and file press ENTER . Press
to select
to select
names on the /
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
system display2) the desired file, then
.
press ENTER
Find a point in Hold down /
a file
during playback,
and release the button
at the desired point.
Select Repeat REPEAT
repeatedly
When the USB device is connected,
the display changes as follows:
Play
until “REP” or “REP1”
appears.
Hold down
the unit in stop mode
until “No Device”
appears, then remove
the USB device.
“Reading”
“ATRAC AD1)” or
“STORAGE DRIVE2)”
Remove the
USB device
on
1)
When connecting a digital music player.
2)
When connecting USB storage media.
e volume label is displayed next if
recorded.
Note
1)
When playing a VBR MP3 file, the system
may resume playback from a different point.
You can search by different information such
as album or genre for digital music players.
It may take about 10 seconds before “Reading”
appears depending on the type of USB device
connected.
2)
3
4
Start playback.
To change the play mode
Press (or USB on the unit)
Press PLAY MODE
repeatedly while
.
the USB device is stopped. You can
select normal play (“ ” for all files in
the folder on the digital music player),
shuffle play (“SHUF” or “ SHUF”), or
program play (“PGM”).
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the USB device
Do not connect the system and the USB
Using optional audio
components
device through a USB hub.
With some connected USB devices, aſter an
operation is performed, there may be a delay
before it is performed by this system.
is system does not necessarily support all
the functions provided in a connected USB
device.
1
Connect additional audio
component to the AUDIO
IN jack
on the unit using
e playback order for the system may differ
from the playback order of the connected
USB device.
an audio analog cord (not
supplied).
Always hold down
and make sure that
“No Device” appears before removing the
USB device. Removing the USB device while
“No Device” is not displayed may corrupt the
data on it or damage the USB device itself.
2
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
.
Do not save other types of files or
unnecessary folders on an USB device that
has audio files.
Folders that have no audio files are skipped.
Files are played back in the order that they
are transferred to the USB device.
e maximum numbers of folders and files
that can be contained on a single USB device
are as follows:
Digital music player: 65,535 groups
(maximum 999 tracks per group)
3
4
5
Select the AUDIO IN function.
Press AUDIO IN
on the unit.
Start playing the connected
component.
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
USB storage media: 999 files
e maximum number of files and folders
may vary depending on the file and folder
structure.
e audio formats that you can listen to with
this system are as follows:
MP3: file extension “.mp3”
Windows Media Audio file: file extension
“.wma”
AAC: file extension “.m4a”
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
Compatibility with all encoding/writing
soſtwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Changing the display
To add a sound effect
To
Change
Press
DISPLAY
repeatedly
To
Press
information on when the system is on.
Generate a
more dynamic
sound
DSGX
on the unit.
the display1)
Check the
DISPLAY
when
clock when the the system is off2). e
(Dynamic
Sound
system is off
clock is displayed for 8
seconds.
Generator
X-tra)
1)
For example, you can view CD/MP3 disc
information or the USB device information,
such as the track or file number or folder
name during normal play, or the total
playing time while the player is stopped. You
can also view DAB station information such
as the service name, channel label, preset
number, frequency, DLS (Dynamic Label
Segment), or ensemble label.
Set the sound EQ
repeatedly
effect
to select “BASS”
or “TREBLE,” and
then press +/
repeatedly to adjust the
level.
2)
e STANDBY indicator
lights up when the system is off.
on the unit
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc and USB device.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
e following are displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters for an MP3 disc).
ID3 tag information for “ATRAC” files
when ID3 version 2 tags are used.
up to 8 characters of service name, up to
128 characters of DLS (Dynamic Label
Segment) and up to 16 characters of
ensemble label.
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press ENTER
to add the track
Other Operations
or file to the program.
CD
Creating your own
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
program
(Program Play)
Use buttons on the remote to create your
own program.
USB
e total program time cannot be
displayed, so “ . ” appears.
1
Select the desired function.
CD
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
Press CD
function.
to select the CD
USB
Press USB
function.
to select the USB
To play your program of tracks
or files, press
.
repeatedly
until “PGM”appears while the
system is stopped.
2
3
Press PLAY MODE
e program remains available until
you open the disc tray or remove
the USB device. To play the same
.
program again, press
Press /
repeatedly
To cancel Program Play
until the desired track or file
number appears.
Press PLAY MODE
repeatedly until
“PGM” disappears while the system is
stopped.
When programming files, press
+/
repeatedly to select the
desired folder, and then select the
desired file.
To delete the last track or file of the
program
Example: When programming tracks
on a CD
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
Note on presetting DAB stations
You can preset a DAB service only when it can
be received.
1
Tune in the desired station (see
“Listening to the radio”(page
14)).
.
2
Press TUNER MEMORY
Preset number
3
Press +/
repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press ENTER
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 DAB, 20
FM and 10 AM stations. e preset
stations are retained for about half a
day even if you disconnect the power
cord or if a power failure occurs.
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select the sound source.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Press /
repeatedly until
the desired sound source appears, and
then press ENTER . e display
shows the timer settings.
Press /
to turn off the
Sleep Timer:
system.
You can fall asleep to music. is
function works even if the clock is not
set.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Press SLEEP
repeatedly.
If you select “AUTO,” the system
automatically turns off aſter the current
disc stops or in 100 minutes.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press
/
repeatedly until “PLAY
Play Timer:
SEL?” appears, and then press ENTER
You can wake up to CD, tuner or optional
USB device at a preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
.
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF?” appears, and then press
.
ENTER
1
Prepare the sound source.
Prepare the sound source, and then
To change the setting
press VOLUME +/
to adjust the
Start over from step 1.
volume.
To start from a specific track or file,
create your own program (page 19).
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
.
2
3
Press CLOCK/TIMER SET
Press /
repeatedly
to select “PLAY SET?,”and then
.
press ENTER
“ON TIME” appears, and the hour
indication flashes.
4
5
Set the time to start playing.
Press /
repeatedly to set
the hour, and then press ENTER
.
e minute indication flashes. Use the
procedure above to set the minutes.
Use the same procedure as in
step 4 to set the time to stop
playing.
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Severe hum or noise.
Move the system away from sources of
Others
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
Troubleshooting
Make sure the power cord and
speaker cords are correctly and firmly
connected.
1
The remote does not function.
Remove any obstacles between the
on
2
Find your problem in the checklist
below, and take the indicated
corrective action.
remote and the remote sensor
the unit, and position the unit away
from fluorescent lights.
If the issue persists, contact your
nearest Sony dealer.
Point the remote at the system’s sensor.
Move the remote closer to the system.
The STANDBY indicator
remains lit
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
after unplugging the power cord.
e STANDBY indicator
may not
turn off immediately aſter unplugging
the power cord. is is not a
malfunction. e indicator will turn off
aſter about 40 seconds.
Are you using only the supplied
speakers?
CD/MP3 player
Is anything blocking the ventilation
holes on the top or back of the
system?
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Aſter the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Play does not start from the first
track.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Connect only the supplied speakers.
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting playback takes more time
than usual.
e following discs take a longer time
to start playback.
The sound is distorted.
e bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.
a disc recorded with a complicated
There is noise or the sound skips.
Turn off the system, then reconnect the
USB device.
tree structure.
a disc recorded in multisession
mode.
a disc that has not been finalized (a
disc to which data can be added).
e music data itself contains noise.
Noise may have been introduced
when creating music data due to the
conditions of the computer. Create the
music data again.
When using the USB storage media,
copy the files to your computer, format
the USB storage media in FAT16 or
FAT32 format, and copy the files to the
USB storage media again.*
a disc that has many folders.
USB device
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices”
(page 30) for the supported device
types.
e USB device is not recognized.
File or folder names are not
displayed on this system.
The USB device cannot be connected
.
into the
(USB) port
e USB device is being connected
backwards. Connect the USB device in
the correct orientation.
The USB storage media which has
been used on another device does
not work.
Playback is not possible.
e sound skips.
ere is noise.
It may be recorded in an unsupported
format. If so, first take the precaution
of backing up important files on the
USB storage media by copying them to
your computer hard disk. Next, format
the USB storage media with a FAT16
or FAT32 file system and transfer the
backed-up audio files onto the USB
storage media again.*
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port . Turn off the system and
remove the USB device from the
(USB) port . Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
“Reading” is displayed for a long
time.
It may take a while to finish reading the
USB device if there are many folders
or files on it. us, we recommend
following these guidelines.
There is no sound.
e USB device is not connected
correctly. Turn off the system, then
reconnect the USB device and check if
the USB MEMORY indicator
up.
lights
Total folders on USB device: 100 or
less
Total files per folder: 100 or less
Continued
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Erroneous display
Tuner
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
Severe hum or noise, or stations
cannot be received. (“TUNED” or “ST”
flashes on the display.)
Play does not start.
Turn off the system, then reconnect the
USB device.
Connect the USB device that this
system can play.
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
Press (or USB on the unit)
to start play.
Connect a commercially available
Play does not start from the first
track.
Set the play mode to Normal Play
mode.
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
Turn off nearby electrical equipment.
Files cannot be played back.
USB storage media formatted with file
systems other than FAT16 or FAT32
are unsupported.*
If you use partitioned USB storage
media, only files on the first partition
can be played.
“TUNED” does not appear in the
display (DAB only).
Check all antenna connections, then
perform the DAB Automatic Scan
procedure (see page 12).
e current DAB service may not be
Files that are encrypted or protected by
passwords, etc. cannot be played back.
available. Press +/ (or TUNE +/
on the unit)
service.
to select a different
*
is system supports FAT16 and FAT32, but
some USB storage media may not support all
of these FAT. For details, see the operation
manual of each USB storage media or
contact the manufacturer.
If you have moved to another area,
some services/frequencies may have
changed and you may not be able
to tune into your usual broadcast.
Perform the DAB Automatic Scan
procedure to re-register the contents of
broadcasts. (Performing this procedure
clears all previously stored presets.)
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
Messages
CD/MP3 player, Tuner
Complete!: e preset operation ended
repeatedly to
1
Press FUNCTION
normally.
select the CD function, and then turn
off the system.
Invalid: You pressed an invalid button.
LOCKED: e disc tray does not open.
2
After “STANDBY”stops flashing, press
Contact your nearest Sony dealer.
/
on the unit while holding
No Disc: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
No Preset (DAB only): ere is no
stored preset station.
No Service (DAB only): ere is no
supported DAB broadcast in your
country or region.
No Step: All of the programmed tracks
or files have been erased.
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings.
No Text (DAB only): ere is no text
information in the received service.
Use buttons on the unit to reset the
system to its factory default settings.
Over: You have reached the end of the
disc while pressing
playback or pause.
during
1
Disconnect and reconnect the power
cord, and then turn on the system.
Push SELECT!: You tried to set the clock
or timer during timer operation.
2
Press /CANCEL , DSGX
and
Push STOP!: You pressed PLAY MODE
/
at the same time.
during playback.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
Reading: e system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than 26 tracks or files (steps).
TIME NG!: e Play Timer start and end
times are set to the same time.
Continued
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
USB device
ATRAC AD: An ATRAC Audio Device is
Precautions
connected.
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Error: e USB device could not be
recognized or an unknown device is
connected.
Invalid: You have made an invalid or
currently prohibited operation.
No Device: No USB device is connected
or the connected USB device has been
stopped.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not Supported: An unsupported USB
device is connected.
Please Wait: e system is readying for
usage of an USB device.
Reading: e system is recognizing the
USB device.
Discs that this system CANNOT play
CD-ROM
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
Discs of non-standard shape (for
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Removed: e USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
STORAGE DRIVE: USB storage media is
connected.
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
e AC power cord can be changed
only by a qualified service facility.
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
System: Compact disc and digital audio
system
Specifications
Main unit
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Amplifier section
DIN power output (rated):
40 + 40 watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
50 + 50 watts (6 ohms at 1 kHz, 10% THD)
Music power output (reference):
50 + 50 watts (6 ohms at 1 kHz, 10% THD)
Inputs:
Tuner section
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance
47 kilohms
DAB tuner section:
Frequency range*
Band-III: 174.928 (5A) 239.200
(13F) MHz
(USB) port: Type A, maximum
current 500 mA
* For details, see “DAB frequency table”
(page 29).
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of
6 ohms
Antenna: FM/DAB lead antenna
Antenna terminal: 75 ohms, F female
FM stereo, FM/AM superheterodyne tuner
FM tuner section:
Tuning range: 87.5 108.0 MHz (50 kHz
step)
USB section
Supported bit rate
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
MP3 (MPEG 1 Audio Layer-3):
32 320 kbps, VBR
ATRAC: 48 352 kbps
(ATRAC3plus), 66/105/132 kbps
(ATRAC3)
Tuning range: 531 1,602 kHz (with 9 kHz
tuning interval)
WMA: 32 192 kbps, VBR
AAC: 48 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
Antenna: AM loop antenna, external
antenna terminal
Intermediate frequency: 450 kHz
ATRAC: 44.1 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
DAB frequency table (Band-III)
General
Power requirements: 220 240 V AC,
Frequency Label Frequency Label
50/60 Hz
174.928 MHz 5A
176.640 MHz 5B
178.352 MHz 5C
180.064 MHz 5D
181.936 MHz 6A
183.648 MHz 6B
185.360 MHz 6C
187.072 MHz 6D
188.928 MHz 7A
190.640 MHz 7B
192.352 MHz 7C
194.064 MHz 7D
195.936 MHz 8A
197.648 MHz 8B
199.360 MHz 8C
201.072 MHz 8D
202.928 MHz 9A
204.640 MHz 9B
206.352 MHz 9C
208.064 MHz 9D
209.936 MHz 10A
211.648 MHz 10B
213.360 MHz 10C
215.072 MHz 10D
216.928 MHz 11A
218.640 MHz 11B
220.352 MHz 11C
222.064 MHz 11D
223.936 MHz 12A
225.648 MHz 12B
227.360 MHz 12C
229.072 MHz 12D
230.784 MHz 13A
232.496 MHz 13B
234.208 MHz 13C
235.776 MHz 13D
237.488 MHz 13E
239.200 MHz 13F
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 285 × 120 × 235 mm
Mass (excl. speakers): Approx. 2.7 kg
Supplied accessories: Remote Commander
(1), R6 (Size AA) batteries (2), AM loop
antenna (1), FM/DAB lead antenna (2),
Speaker pads (8)
Design and specifications are subject to
change without notice.
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
Halogenated flame retardants
are not used in cabinets.
Speaker
Speaker system: 2-way, 2-unit, bass-reflex
type
Speaker units: Woofer 12 cm, cone type,
Tweeter 4 cm, cone type
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 145 × 260 ×
200 mm
Mass: Approx. 2.2 kg net per speaker
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Verified Sony USB storage media (as of
January 2007)
Playable USB devices
You can play back the following Sony
USB devices on this system. Other USB
devices cannot be played back on this
system.
Product name Model name
MICROVAULT USM512EX / 1GEX /
2GEX
USM128J / 256J / 512J /
1GJ / 2GJ / 4GJ / 8GJ
USM512JX / 1GJX /
2GJX / 4GJX
Verified Sony digital music player (as
of January 2007)
USM256H / 512H /
1GH / 2GH / 4GH
USD2G / 4G / 5G / 8G
Product name Model name
NW-E103 / E105 /
E107
NW-E205 / E207
Walkman
®
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
NW-E303 / E305 /
E307
NW-E403 / E405 /
E407
NW-E503 / E505 /
E507
NW-E002 / E002F /
E003 / E003F / E005 /
E005F
NW-A605 / A607 /
A608
NW-A1000 / A1200 /
A3000
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
NW-HD5
Notes
Do not use USB devices other than these
USB devices. Operation of models not listed
here is not guaranteed.
Operation may not always be ensured even
when using these USB devices.
NW-S603 / S605 /
S703F / S705F / S706F
NW-S202 / S202F /
S203F / S205F
Some of these USB devices may not be
available for purchase in certain areas.
Notes on Walkman
You cannot play back Linear PCM audio on
this system.
You cannot play back the ATRAC Advanced
Lossless audio format on this system.
You cannot play back music recorded directly
to a Walkman without using a computer on
this system.
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|
