3-095-518-62(1)
Micro HI-FI
Component System
Operating Instructions
CMT-HX5BT
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Music discs encoded with copyright
protection technologies
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
e Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MICROVAULT is a trademark of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and
their logos are trademarks of Sony
Corporation.
U.S. and foreign patents licensed from
Dolby Laboratories.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-HX5/Compact Disc Receiver)
Front panel
Top panel
Continued
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote (RM-SCU35)
Remote sensor (page 28)
BLUETOOTH OPR button (page
17, 19, 20)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
Unit: VOLUME control (page 13,
14, 17, 20, 21, 23)
Remote: VOLUME +/ button
(page 13, 14, 17, 20, 21, 23)
Turn or press to adjust the volume.
AUDIO IN jack (page 23)
Connect to an optional audio
component.
PHONES jack
Connect the headphones.
/ (power) button (page 12, 27,
31, 32)
Press to turn on the system.
(open/close) button (page 13)
Press to open or close the disc tray.
STANDBY indicator (page 24, 28)
Lights up when the system is turned off.
(USB) port (page 21, 38)
Connect to an optional USB device
(Digital music player or USB storage
media).
BLUETOOTH indicator (page 19,
20)
Lights up when the Bluetooth function
is active.
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback buttons and function
buttons
Unit: BLUETOOTH (play/
pause) button (page 16, 17)
Press to select the Bluetooth function.
Press to start or pause playback of the
music on the Bluetooth device (Bluetooth
mobile phone, etc.).
Unit: /CANCEL (stop/cancel)
button (page 13, 14, 16, 17, 19,
22)
Remote: (stop) button (page
13, 14, 16, 17, 19, 22)
Press to stop playback.
Press to cancel search.
Unit: USB (play/pause)
button (page 21)
Press to select the USB function.
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
SEARCH button (page 13, 22)
Press to enter or exit search mode.
ENTER button (page 12, 25, 26,
27)
Press to enter the settings.
Remote: USB button (page 21)
Press to select the USB function.
Unit: CD (play/pause)
/ (go back/go forward)
button (page 13, 16, 17, 22, 25)
Press to select a track or file.
button (page 13)
Press to select the CD function.
Press to start or pause playback of a disc.
Remote: CD button (page 13)
Press to select the CD function.
Unit: TUNE +/ (tuning) button
(page 14)
Remote: +/ (tuning) button
(page 14, 26)
Press to tune in the desired station.
Remote: (play) button,
(pause) button
Press to start or pause playback.
+/ (select folder) button
(page 13, 22, 25)
Press to select a folder.
TUNER/BAND button (page 14)
Press to select the TUNER function.
Press to select FM or AM reception
mode.
/ (rewind/fast forward)
button (page 13, 16, 17, 22)
Press to find a point in a track or file.
Unit: AUDIO IN button (page 23)
Press to select the AUDIO IN function.
Remote: FUNCTION button (page
19, 20)
Press to select the function.
Continued
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY MODE/TUNING MODE
CLEAR button (page 17, 19, 25)
button (page 13, 14, 22, 25, 26)
Press to delete a pre-programmed track
or file.
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Press to erase the pairing registration
information of the Bluetooth device.
Press to select the tuning mode.
TUNER MEMORY button (page
26)
Sound buttons (page 23)
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.
Press to preset the radio station.
SLEEP button (page 27)
Press to set the Sleep Timer.
DISPLAY button (page 17, 24)
Press to change the information on the
display.
CLOCK/TIMER SELECT button
(page 27)
CLOCK/TIMER SET button (page
12, 27)
Press to set the clock and the Play Timer.
REPEAT/FM MODE button (page
13, 14, 22)
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
Battery compartment lid
(page 11)
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Play/Pause
Audio format
DSGX (page 23)
Play mode (page 13, 22)
Tuner reception mode (page 14)
Tuner reception (page 14)
Timer (page 27)
USB MEMORY
Lights up when an optional USB device
is connected.
Text information
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
Wall socket
Right speaker
Left speaker
or
FM lead antenna (Extend it horizontally.)
Power
White side for North American model
For models with a voltage selector, set
Brown side for other regions
AM loop antenna
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
Speakers
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
When carrying this system
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
1
2
3
Remove a disc to protect the CD
mechanism.
Press CD
function.
to select the CD
Hold down SEARCH
and press
on the unit,
on the unit until
“STANDBY”appears.
4
After “LOCK”appears, unplug the
power cord.
Speaker pads
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.
To use the remote
Slide and remove the battery
compartment lid , and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
.
Press CLOCK/TIMER SET
If the current mode appears on
the display, press /
repeatedly to select “CLOCK SET?”
.
and then press ENTER
repeatedly
to set the hour, and then press
3
4
Press /
.
ENTER
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operation
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press CD
.
Select a folder
on an MP3
disc
Select a track /
or file
+/
.
2
Place a disc.
Press
on the unit, and place
a disc with the label side up on the
disc tray.
.
Select a folder SEARCH . Press
and file on
/
to select
an MP3 disc the desired folder, then
to select
while viewing press ENTER . Press
the folder and /
file names on the desired file, then
.
the display
press ENTER
Find a point in Hold down /
a track or file
during playback, and
To close the disc tray, press
on
release the button at the
desired point.
the unit again.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
3
4
Start playback.
Press (or CD on the unit)
To change the play mode
.
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
(“SHUF” or “ SHUF*”), or program
play (“PGM”).
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
*
When playing a CD-DA disc,
Play performs the same operation as normal
(shuffle) play.
(SHUF)
Notes on Repeat Play
All tracks or files on a disc are played
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
Continued
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
they are recorded onto the disc.
Listening to the radio
1
Select “FM”or “AM.”
Press TUNER/BAND
repeatedly.
e system can only play MP3 files that have
2
Select the tuning mode.
a file extension of “.MP3”.
Press TUNING MODE
until “AUTO” appears.
repeatedly
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
MP3 files and folders that can be
contained on a single disc is 512.
folder levels (the tree structure of files) is
8.
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
3
4
Tune in the desired station.
Press +/ (or TUNE +/ on
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
When you tune in a station that
provides RDS services, the station
name appears on the display
(European model only).
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
To stop automatic scanning
.
Press
To tune in a station with a weak signal
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to music of a
Bluetooth mobile phone or
Bluetooth device
Using the Bluetooth
function
is system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
36).
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device
Connecting to registered devices
Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
Continued
1ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with a Bluetooth
device
4
Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 17).
When “PIN?” and a countdown
appear, enter the passcode at the
system as follows:
Press / and /
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
on the remote (or
+/ and
/ on the unit)
to enter the same passcode that was
entered at the Bluetooth device, and
.
then press ENTER
2
3
Select the Bluetooth function.
Once pairing is completed and the
connection is established, the system
display changes as follows:
Press BLUETOOTH
the unit.
on
“Connect”
device
Name of the Bluetooth
Operate the Bluetooth device
and perform the pairing
operation.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
When searching for this system with
the Bluetooth device, a list of the
devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
is system appears as “CMT-
HX5BT.”
To cancel passcode entry partway
.
Press
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 17).
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all the pairing registration
information
3
4
Start playback.
Press (or BLUETOOTH on
.
the unit)
on the
1
Press BLUETOOTH
unit.
Depending on the Bluetooth device,
you may need to start up the AV
soſtware of the Bluetooth device
beforehand.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
and hold BLUETOOTH OPR
on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
.
2
3
Press CLEAR
.
To check the address of a connected
Bluetooth device
“Delete?” appears.
Press DISPLAY
while the Bluetooth
.
Press ENTER
device name appears in the system
display.
e Bluetooth device address appears for
8 seconds.
“Complete!” appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
aſter performing this operation, you must enter
the passcode again.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR
Playing music of a Bluetooth device
on the unit for about 2 seconds until
“Disconnect” appears, or until the
information on the display (device name,
etc.) disappears.
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “Not in Use” appears when you
operate the system.
Other operation
To
Press
1
2
Select the Bluetooth function.
Pause playback (or BLUETOOTH
Press BLUETOOTH
the unit.
on
.
on the unit)
.
Stop playback
Select a file
Find a point in Hold down /
a file
.
/
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
.
Note
ese operations may not be available for
certain Bluetooth devices. In addition, the
Once the connection is established,
the system display changes as follows:
actual operations may differ depending on the
connected Bluetooth device.
“Connect”
device
Name of the Bluetooth
Continued
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
When BLUETOOTH
on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones
Connecting to registered headphones
Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with Bluetooth
headphones
To cancel passcode entry partway
.
Press
Pairing is an operation where Bluetooth
devices register with each other
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 20).
1
Select a function other than the
Bluetooth function.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Press FUNCTION
repeatedly.
Pairing may not be possible if other
Bluetooth devices are present around the
system. In this case, turn off the other
Bluetooth devices.
2
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
To erase all the pairing registration
information
3
4
Put the Bluetooth headphones
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
on the
1
Press BLUETOOTH
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Press and hold BLUETOOTH
and hold BLUETOOTH OPR
on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
OPR
on the unit for about 7
seconds until the BLUETOOTH
indicator
flashes.
.
2
3
Press CLEAR
Sound output from the speakers is
stopped.
“Delete?” appears.
.
Press ENTER
“Complete!” appears and all the
pairing information is erased.
5
Enter the passcode.
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 16).
Note
To connect with Bluetooth headphones aſter
performing this operation, you must enter the
passcode again.
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”
device
Name of the Bluetooth
Continued
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music on this system
To cancel the connection with
Bluetooth headphones
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until the
BLUETOOTH indicator
turns off.
Notes
1
Select a function other than the
Bluetooth function.
If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
Press FUNCTION
repeatedly.
2
Establish a connection with the
Bluetooth headphones.
When the system is changed to a function
other than the Bluetooth function and
BLUETOOTH OPR
on the unit is pressed
Press and hold BLUETOOTH OPR
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
on the unit for about 2 seconds
until the BLUETOOTH indicator
lights up, then release the button.
is system stores separate volume settings
If more than one Bluetooth device
for when listening through the speakers
or PHONES jack
on the unit, or when
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
listening through Bluetooth headphones.
Once the connection is established,
the system display changes as follows:
“Connect” Name of the Bluetooth
device
3
4
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Select the USB function.
Listening to music of
an USB device
Press USB
.
Connect an optional USB device
(Digital music player or USB
storage media) to the (USB)
You can connect an optional USB device
(Digital music player or USB storage
media) to the
(USB) port
on the
port
as shown below.
unit and listen to music stored in the
USB device. See “Playable USB devices
and Bluetooth devices” (page 38) for a list
of USB devices that can be connected to
this system.
e audio formats that can be played
back by this system are as follows:
ATRAC/MP3*/WMA*/AAC*
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
USB device (Digital
music player or USB
storage media)
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
When the USB device is connected,
the display changes as follows:
“Reading”
“ATRAC AD1)” or
“STORAGE DRIVE2)”
1)
When connecting a digital music player.
When connecting USB storage media.
2)
e volume label is displayed next if
recorded.
Note
It may take about 10 seconds before “Reading”
appears depending on the type of USB device
connected.
3
4
Start playback.
Press (or USB on the unit)
.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
Continued
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the USB device
Other operation
Do not connect the system and the USB
device through a USB hub.
To
Press
With some connected USB devices, aſter an
operation is performed, there may be a delay
before it is performed by this system.
is system does not necessarily support all
the functions provided in a connected USB
device.
Pause playback (or USB on
the unit) . To resume
play, press the button
again.
Stop playback
Select a folder
.
e playback order for the system may differ
from the playback order of the connected
USB device.
.
+/
Select a file
/
.
Always hold down
and make sure that
Select a folder SEARCH . Press
“No Device” appears before removing the
USB device. Removing the USB device while
“No Device” is not displayed may corrupt the
data on it or damage the USB device itself.
and file while /
viewing the the desired folder, then
folder and file press ENTER . Press
to select
to select
names on the /
Do not save other types of files or
unnecessary folders on an USB device that
has audio files.
system display* the desired file, then
press ENTER
.
Folders that have no audio files are skipped.
Files are played back in the order that they
are transferred to the USB device.
e maximum numbers of folders and files
that can be contained on a single USB device
are as follows:
Digital music player: 65,535 groups
(maximum 999 tracks per group)
Find a point in Hold down /
a file
during playback,
and release the button
at the desired point.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
Remove the
USB device
Hold down
until
USB storage media: 999 files
“No Device” appears,
then remove the USB
device.
e maximum number of files and folders
may vary depending on the file and folder
structure.
e audio formats that you can listen to with
this system are as follows:
*
You can search by different information such
as album or genre for digital music players.
MP3: file extension “.mp3”
Windows Media Audio file: file extension
To change the play mode
“.wma”
AAC: file extension “.m4a”
Press PLAY MODE
repeatedly while
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
Compatibility with all encoding/writing
soſtwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
the USB device is stopped. You can
select normal play (“ ” for all files in
the folder on the digital music player),
shuffle play (“SHUF” or “
program play (“PGM”).
SHUF”), or
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using optional audio
components
Adjusting the sound
To add a sound effect
To
Press
1
Connect additional audio
component to the AUDIO
Generate a
more dynamic
sound
DSGX
on the unit.
IN jack
on the unit using
an audio analog cord (not
supplied).
(Dynamic
Sound
Generator
X-tra)
2
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
Set the sound EQ
effect
repeatedly
.
to select “BASS”
or “TREBLE,” and
3
4
5
Select the AUDIO IN function.
then press +/
repeatedly to adjust the
level.
Press AUDIO IN
on the unit.
Start playing the connected
component.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display
To
Press
Change
DISPLAY
repeatedly
information on when the system is on.
the display1)2)
Check the
DISPLAY
when
clock when the the system is off3). e
system is off
clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc
information or the USB device information,
such as the track or file number or folder
name during normal play, or the total
playing time while the player is stopped.
When the system and a Bluetooth device are
connected using the Bluetooth function, you
can view the Bluetooth device address.
2)
3)
e STANDBY indicator
on the unit
lights up when the system is off.
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc and USB device.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
e following are displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters for an MP3 disc).
ID3 tag information for “ATRAC” files
when ID3 version 2 tags are used.
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press ENTER
to add the track
Other Operations
or file to the program.
CD
Creating your own
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
program
(Program Play)
1
Select the desired function.
USB
e total program time cannot be
displayed, so “ . ” appears.
CD
Press CD
function.
to select the CD
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
USB
Press USB
function.
to select the USB
repeatedly
2
3
Press PLAY MODE
until “PGM”appears while the
system is stopped.
To play your program of tracks
.
or files, press
e program remains available until
you open the disc tray or remove
the USB device. To play the same
Press /
until the desired track or file
number appears.
repeatedly
.
program again, press
When programming files, press
To cancel Program Play
+/
repeatedly to select the
Press PLAY MODE
repeatedly until
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
“PGM” disappears while the system is
stopped.
To delete the last track or file of the
program
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
1
Tune in the desired station (see
“Listening to the radio”(page
14)).
.
2
Press TUNER MEMORY
Preset number
3
Press +/
repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press ENTER
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations. e preset stations are
retained for about half a day even if
you disconnect the power cord or if a
power failure occurs.
ꢀ6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select the sound source.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Press /
repeatedly until
the desired sound source appears, and
then press ENTER . e display
shows the timer settings.
Press /
to turn off the
Sleep Timer:
system.
You can fall asleep to music. is
function works even if the clock is not
set.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Press SLEEP
repeatedly.
If you select “AUTO,” the system
automatically turns off aſter the current
disc stops or in 100 minutes.
Note
Before the system is turned off, if a connection
is made with the Bluetooth headphones,
sounds played by the Play Timer may be output
to the Bluetooth headphones.
Play Timer:
You can wake up to CD, tuner or optional
USB device at a preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press
/
repeatedly until “PLAY
SEL?” appears, and then press ENTER
.
1
Prepare the sound source.
Prepare the sound source, and then
To cancel the timer
press VOLUME +/
volume.
to adjust the
Repeat the same procedure as above until
“TIMER OFF?” appears, and then press
To start from a specific track or file,
create your own program (page 25).
.
ENTER
To change the setting
.
2
3
Press CLOCK/TIMER SET
Start over from step 1.
Press /
repeatedly
to select “PLAY SET?,”and then
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
.
press ENTER
“ON TIME” appears, and the hour
indication flashes.
4
5
Set the time to start playing.
Press /
repeatedly to set
the hour, and then press ENTER
.
e minute indication flashes. Use the
procedure above to set the minutes.
Use the same procedure as in
step 4 to set the time to stop
playing.
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Severe hum or noise.
Move the system away from sources of
Others
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
Troubleshooting
Make sure the power cord and
speaker cords are correctly and firmly
connected.
1
There is no sound.
If the BLUETOOTH indicator
is lit
2
Find your problem in the checklist
below, and take the indicated
corrective action.
If the issue persists, contact your
nearest Sony dealer.
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH OPR
for about
2 seconds until the BLUETOOTH
indicator
turns off.
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
The remote does not function.
Remove any obstacles between the
remote and the remote sensor
on
the unit, and position the unit away
from fluorescent lights.
Are you using only the supplied
speakers?
Point the remote at the system’s sensor.
Move the remote closer to the system.
Is anything blocking the ventilation
holes on the top or back of the
system?
The STANDBY indicator
remains lit
after unplugging the power cord.
Aſter the STANDBY indicator
e STANDBY indicator
may not
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
turn off immediately aſter unplugging
the power cord. is is not a
malfunction. e indicator will turn off
aſter about 40 seconds.
CD/MP3 player
General
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Connect only the supplied speakers.
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Play does not start from the first
track.
The sound skips or fluctuates, or the
connection is lost.
e system and the Bluetooth device
are too far apart.
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Starting playback takes more time
than usual.
e following discs take a longer time
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
The sound of your Bluetooth device
cannot be heard on this system.
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
Turn up the volume on your Bluetooth
device first, and then adjust the volume
.
using VOLUME +/
Bluetooth device
Severe hum or noise
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Pairing cannot be done.
Move the Bluetooth device closer to
the system.
Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
Turn down the volume of the
Connection is not possible.
connected Bluetooth device.
e Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
Enable the Bluetooth function of the
Bluetooth device.
e pairing registration information
has been erased. Perform the pairing
operation again.
While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Press DSGX
on the unit repeatedly
until “DSGX OFF” appears.
Press EQ
repeatedly to select
“BASS” or “TREBLE,” and then press
level.
repeatedly to turn down the
Continued
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is noise or the sound skips.
Turn off the system, then reconnect the
USB device.
USB device
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices and
Bluetooth devices” (page 38) for the
supported device types.
e USB device is not recognized.
File or folder names are not
displayed on this system.
e music data itself contains noise.
Noise may have been introduced
when creating music data due to the
conditions of the computer. Create the
music data again.
When using the USB storage media,
copy the files to your computer, format
the USB storage media in FAT16 or
FAT32 format, and copy the files to the
USB storage media again.*
Playback is not possible.
e sound skips.
ere is noise.
The USB device cannot be connected
.
into the
(USB) port
e USB device is being connected
backwards. Connect the USB device in
the correct orientation.
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port . Turn off the system and
The USB storage media which has
been used on another device does
not work.
remove the USB device from the
(USB) port . Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
It may be recorded in an unsupported
format. If so, first take the precaution
of backing up important files on the
USB storage media by copying them to
your computer hard disk. Next, format
the USB storage media with a FAT16
or FAT32 file system and transfer the
backed-up audio files onto the USB
storage media again.*
There is no sound.
e USB device is not connected
correctly. Turn off the system, then
reconnect the USB device and check if
“USB MEMORY” appears.
The sound is distorted.
“Reading” is displayed for a long
time.
It may take a while to finish reading the
USB device if there are many folders
or files on it. us, we recommend
following these guidelines.
e bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.
Total folders on USB device: 100 or
less
Total files per folder: 100 or less
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Erroneous display
Tuner
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
Severe hum or noise, or stations
cannot be received. (“TUNED” or “ST”
flashes on the display.)
Play does not start.
Turn off the system, then reconnect the
USB device.
Connect the USB device that this
system can play.
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
Press (or USB on the unit)
to start play.
Connect a commercially available
Play does not start from the first
track.
Set the play mode to Normal Play
mode.
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
Turn off nearby electrical equipment.
Files cannot be played back.
USB storage media formatted with file
systems other than FAT16 or FAT32
are unsupported.*
If you use partitioned USB storage
media, only files on the first partition
can be played.
To change the AM tuning interval
e AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas; this
function is not available on the European
model).
Use buttons on the unit to change the
AM tuning interval.
Files that are encrypted or protected by
passwords, etc. cannot be played back.
1
Tune in any AM station, and then
turn off the system.
*
is system supports FAT16 and FAT32, but
some USB storage media may not support all
of these FAT. For details, see the operation
manual of each USB storage media or
contact the manufacturer.
2
While holding down TUNER/BAND
.
, press /
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
Continued
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
Messages
CD/MP3 player, Tuner
Complete!: e preset operation ended
repeatedly to
1
Press FUNCTION
normally.
select the CD function, and then turn
off the system.
Invalid: You pressed an invalid button.
LOCKED: e disc tray does not open.
2
After “STANDBY”stops flashing, press
Contact your nearest Sony dealer.
/
on the unit while holding
No Disc: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
Over: You have reached the end of the
disc while pressing
playback or pause.
during
To reset the system to factory settings
Push SELECT!: You tried to set the clock
or timer during timer operation.
If the system still does not operate
properly, reset the system to factory
settings.
Push STOP!: You pressed PLAY MODE
during playback.
Use buttons on the unit to reset the
system to its factory default settings.
Reading: e system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than 26 tracks or files (steps).
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press /CANCEL , DSGX
and
/
at the same time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
TIME NG!: e Play Timer start and end
times are set to the same time.
Bluetooth device
Connect: Bluetooth communication was
established.
Disconnect: Communication with a
Bluetooth device was cut off for some
reason, or Bluetooth communication
was ended.
No Device: A pairable Bluetooth device
was not found, or connection was not
possible.
Not in Use: e system is not connected
with a Bluetooth device using AVRCP.
ꢁꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
PIN?: e system is asking for the
passcode. For details, see “Using the
Bluetooth function” (page 15).
Please Wait: e system is readying for
usage of a Bluetooth device.
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
USB device
ATRAC AD: An ATRAC Audio Device is
Discs that this system CANNOT play
CD-ROM
connected.
Error: e USB device could not be
recognized or an unknown device is
connected.
Invalid: You have made an invalid or
currently prohibited operation.
No Device: No USB device is connected
or the connected USB device has been
stopped.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not Supported: An unsupported USB
device is connected.
Please Wait: e system is readying for
usage of an USB device.
Reading: e system is recognizing the
USB device.
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
Discs of non-standard shape (for
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Removed: e USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
STORAGE DRIVE: USB storage media is
connected.
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
Continued
ꢁꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
e AC power cord can be changed
only by a qualified service facility.
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢁꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
1)
e actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
antenna’s performance, operating system,
soſtware application, etc.
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
Specifications
Main unit (HCD-HX5/Compact Disc
Receiver)
2)
Amplifier section
DIN power output (rated):
60 + 60 watts (4 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 75 + 75 watts (4 ohms at
1 kHz, 10% THD)
USB section
Supported bit rate
MP3 (MPEG 1 Audio Layer-3):
32 320 kbps, VBR
Music power output (reference):
75 + 75 watts (4 ohms at 1 kHz, 10%
THD)
ATRAC: 48 352 kbps
(ATRAC3plus), 66/105/132 kbps
(ATRAC3)
Inputs:
WMA: 32 192 kbps, VBR
AAC: 48 320 kbps
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance
47 kilohms
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
(USB) port: Type A, maximum
current 500 mA
ATRAC: 44.1 kHz
WMA: 44.1 kHz
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of
4 ohms
AAC: 44.1 kHz
CD player section
System: Compact disc and digital audio
system
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
2.4 GHz band (2.4000 GHz
2.4835 GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
Continued
ꢁꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner section
FM stereo, FM/AM superheterodyne tuner
Bluetooth wireless
technology
Bluetooth wireless technology is a short-
range wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
e Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
FM tuner section:
Tuning range: 87.5 108.0 MHz (50 kHz
step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Tuning range: 531 1,602 kHz (with 9 kHz
tuning interval)
Antenna: AM loop antenna, external
antenna terminal
Intermediate frequency: 450 kHz
Speaker (SS-CHX5)
Speaker system: 2-way, 3-unit, bass-reflex
type
Speaker units: Woofer 10 cm × 2, cone type,
Tweeter 2.5 cm, soſt dome type
Nominal impedance: 4 ohms
Dimensions (w/h/d): Approx. 145 × 300 ×
200 mm
Mass: Approx. 2.6 kg net per speaker
Bluetooth wireless technology is a global
standard supported by thousands of
companies. ese companies produce
products that meet the global standard.
General
Power requirements: 220 240 V AC,
50/60 Hz
Power consumption: 50 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 285 × 120 × 215 mm
Supported Bluetooth version and
profiles
Mass (excl. speakers): 2.7 kg
Profile refers to a standard set of
Supplied accessories: Remote Commander
(RM-SCU35) (1), R6 (Size AA) batteries (2),
AM loop antenna (1), FM lead antenna (1),
Speaker pads (8)
Design and specifications are subject to
change without notice.
capabilities for various Bluetooth product
capabilities. is system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
AVRCP (Audio Video Remote
Control Profile)
Halogenated flame retardants
are not used in cabinets.
ꢁ6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective communication range
Effects on other devices
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. e effective
communication range may become
shorter under the following conditions.
e radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
Locations where other electromagnetic
waves occur
In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
Near automatic doors or fire alarms
Notes
is system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. is could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
ꢁꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Verified Sony USB storage media (as of
January 2007)
Playable USB devices
and Bluetooth devices
Product name Model name
MICROVAULT USM512EX / 1GEX /
2GEX
USB devices
USM128J / 256J / 512J /
1GJ / 2GJ / 4GJ / 8GJ
USM512JX / 1GJX /
2GJX / 4GJX
USM256H / 512H /
1GH / 2GH / 4GH
You can play back the following Sony
USB devices on this system. Other USB
devices cannot be played back on this
system.
Verified Sony digital music player (as
of January 2007)
USD2G / 4G / 5G / 8G
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
Product name Model name
NW-E103 / E105 /
E107
NW-E205 / E207
Walkman
®
ElectronicsSupport/>
NW-E303 / E305 /
E307
NW-E403 / E405 /
E407
NW-E503 / E505 /
E507
NW-E002 / E002F /
E003 / E003F / E005 /
E005F
NW-A605 / A607 /
A608
NW-A1000 / A1200 /
A3000
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Notes
Do not use USB devices other than these
USB devices. Operation of models not listed
here is not guaranteed.
Operation may not always be ensured even
when using these USB devices.
NW-HD5
NW-S603 / S605 /
S703F / S705F / S706F
Some of these USB devices may not be
available for purchase in certain areas.
Notes on Walkman
NW-S202 / S202F /
S203F / S205F
You cannot play back Linear PCM audio on
this system.
You cannot play back the ATRAC Advanced
Lossless audio format on this system.
You cannot play back music recorded directly
to a Walkman without using a computer on
this system.
ꢁꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
ꢁꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|
